Download: COMPACT COMPONENT SYSTEM MX-K350V Consists of CA-MXK350V and SP-MXK350V CA-MXK350V SP-MXK350V

Cover.fm Page 1 Monday, July 22, 2002 2:31 PM COMPACT COMPONENT SYSTEM MX-K350V Consists of CA-MXK350V and SP-MXK350V CA-MXK350V SP-MXK350V 3-CD PLAY & EXCHANGE CD-R/RW PLAYBACK SOUND COMPACT COMPONENT SYSTEM MX-K350V REPEAT MODE STANDBY/ON 1 BIT DUAL D/A CONVERTER PROGRAM SLEEPCELASSIC AUX RANDOM STANDBY STANDBY/ON FM MODE FM /AM CANCEL SET KIP / DEMO PRESET C SPREV. NEXT DIS VIDEO INTRO ON SCREEN HIGHLIGHT PREV. NEXT AUX FM CD TAPE / AM 3 PHONES CD TUNING STILL RETURN REC START CD SELECT VCD NUMBER / STOP REC START DUBBING ACTIVE 2 CD1 CD2 CD3 CD BASS EX. CD MIC MIC LEVEL PBC RETURN KEY CONT...
Author: Aurora Ness Shared: 7/30/19
Downloads: 61 Views: 517

Content

Cover.fm Page 1 Monday, July 22, 2002 2:31 PM COMPACT COMPONENT SYSTEM MX-K350V Consists of CA-MXK350V and SP-MXK350V CA-MXK350V SP-MXK350V

3-CD PLAY & EXCHANGE CD-R/RW PLAYBACK

SOUND

COMPACT COMPONENT SYSTEM MX-K350V REPEAT MODE STANDBY/ON 1 BIT DUAL D/A

CONVERTER PROGRAM

SLEEPCELASSIC AUX RANDOM STANDBY STANDBY/ON FM MODE FM /AM CANCEL SET

KIP

/ DEMO PRESET C SPREV. NEXT DIS VIDEO INTRO ON SCREEN HIGHLIGHT PREV. NEXT AUX FM CD TAPE / AM 3 PHONES CD

TUNING

STILL RETURN REC START CD SELECT VCD NUMBER / STOP REC START DUBBING ACTIVE 2 CD1 CD2 CD3 CD BASS EX. CD MIC MIC LEVEL PBC RETURN KEY CONTROL CLOCK TAPE /TIMER A / B PROGRAM 1 REPEAT SELECT

D

/RANDOM C MIN MAX

TAPE

A/B TAPE KEY CONTROL MPX

SOUND

MODE KARAOKE EJECT EJECT ACTIVE FADE BASS EX. ECHO MUTING VOLUME A PLAY FULL - LOGIC CONTROL CD SYNCHRO RECORDINGREC / PLAYB

SP-MXK350V CA-MXK350V SP-MXK350V INSTRUCTIONS For Customer Use: Enter below the Model No. and Serial No.

which are located either on the rear, bot- tom or side of the cabinet. Retain this information for future reference.

Model No. Serial No. LVT0864-001B

44-1148-1 [US]

VOLUM ROCK OPP

, MX-K350V[US].book Page 1 Tuesday, June 11, 2002 9:32 AM

Warnings, Cautions and Others

CAUTION Caution –– switch! To reduce the risk of electrical shocks, fire, etc.: Disconnect the mains plug to shut the power off completely. The 1. Do not remove screws, covers or cabinet. switch in any position does not disconnect the mains line. The power 2. Do not expose this appliance to rain or moisture. can be remote controlled.

IMPORTANT FOR LASER PRODUCTS /

REPRODUCTION OF LABELS / 1 CLASSIFICATION LABEL, PLACED ON EXTERIOR SURFACE 2 WARNING LABEL, PLACED INSIDE THE UNIT12CLASS 1 LASER PRODUCT

DANGER

1. Invisible laser radiation when open and interlock failed or defeated. Avoid direct exposure to beam.

CAUTION

1.Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to quali- fied service personnel. 2.Useofcontrolsadjustmentsorperformance of procedures other than those specified herein may result in hazardous radiation exposure.

G-1

, MX-K350V[US].book Page 2 Tuesday, June 11, 2002 9:32 AM Caution: Proper Ventilation To avoid risk of electric shock and fire, and to prevent damage, locate the apparatus as follows: 1 Front: No obstructions and open spacing. 2 Sides/ Top/ Back: No obstructions should be placed in the areas shown by the dimensions below. 3 Bottom: Place on the level surface. Maintain an adequate air path for ventilation by placing on a stand with a height of 10 cm or more. Front view Side view 15cm 15cm 1cm 1cm 15cm 15cm 15cm CA-MXK350V CA-MXK350V 10cm

CAUTION

1.Do not block the ventilation openings or holes. (If the ventilation openings or holes are blocked by a news- paper or cloth, etc., the heat may not be able to get out.) 2.Do not place any naked flame sources, such as lighted can- dles, on the apparatus. 3.When discarding batteries, environmental problems must be considered and local rules or laws governing the disposal of these batteries must be followed strictly. 4.Do not expose this apparatus to rain, moisture, dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.

G-2

, MX-K350V[US].book Page 1 Tuesday, June 11, 2002 9:32 AM

Introduction

Thank you for purchasing the JVC Compact Component System. We hope it will be a valued addition to your home, giving you years of enjoyment. Be sure to read this instruction manual carefully before operating your new stereo system. In it you will find all the information you need to set up and use the system. If you have a query that is not answered by the manual, please contact your dealer.

Features

Here are some of the things that make your System both powerful and simple to use. ❏ Types of CD you can play Many types of compact discs are sold for a variety of uses. The Video CD Player can play the following compact discs. • Video CD without Playback Control function: for audio and video (moving picture) reproduction. • Video CD with Playback Control function: featuring user interrupting operation and super-fine still pictures for audio and video (moving picture) reproduction. • MP3 disc • Digital Audio CD, including 8-cm CDs: for audio reproduction. • CDs you cannot play: Do not play SVCDs, DVDs and CD-ROMs on this System. Playing CD-ROMs may generate a noise which can damage your speakers. ❏ The controls and operations have been redesigned to make them very easy to use, freeing you to just enjoy the music. • With JVC’s COMPU PLAY you can turn on the System and automatically start the Radio, Cassette Deck, or CD Player with a single touch. ❏ The great SEA (Sound Effect Amplifier) effects Rock, Pop and Classics are provided. ❏ The Active Bass EX. (Extension) circuitry faithfully reproduces low frequency sounds. ❏ A 45-station preset capability (30 FM and 15 AM) in addition to auto-seek and manual tuning. ❏ CD changer function can operate 3 discs. • Discs can be changed during play using the Carrousel tray (rotational tray). • Continuous, random or program play of 3 discs. ❏ Two Decks enabling tape dubbing. ❏ You can use conventional tapes and CDs for Karaoke with the voice masking system. With an optional microphone, you can replace the lead singer’s voice on your favorite songs with your own. • Digital Echo applied to your voice through the microphone gives you a professional sound. ❏ Timer functions; Daily Timer, REC (Recording) Timer, and Sleep Timer. ❏ You can connect various external units, such as an MD recorder. ❏ The CD Player can play back a CD-R and CD-RW.

How This Manual Is Organized

• Basic information that is the same for many different functions - e.g. setting the volume - is given in the section “Basic Operations”, and not repeated under each function. • The names of buttons/controls and display messages are written in all capital letters: e.g. FM/AM, “NO DISC”. • If the button names on the Unit and the Remote Control are the same, the description on where the button is used will be omitted. • System functions are written with an initial capital letter only: e.g. Normal Play. Use the table of contents to look up specific information you require. We have enjoyed making this manual for you, and hope it serves you in enjoying the many features built into your System.

IMPORTANT CAUTIONS

1 Installation of the System • Select a place which is level, dry and neither too hot nor too cold. (Between 5°C and 35°C or 41°F and 95°F.) • Leave sufficient distance between the System and a TV. • Do not use the System in a place subject to vibrations. 2 Power cord • Do not handle the power cord with wet hands! • Some power is always consumed as long as the power cord is connected to the wall outlet. • When unplugging the System from the wall outlet, always pull the plug, not the power cord. 3 Malfunctions, etc. • There are no user serviceable parts inside. In case of system failure, unplug the power cord and consult your dealer. • Do not insert any metallic object into the System., MX-K350V[US].book Page 2 Tuesday, June 11, 2002 9:32 AM

Table of Contents

Introduction ...1 Features... 1 How This Manual Is Organized... 1 IMPORTANT CAUTIONS... 1 Table of Contents ...2 Getting Started ...3 Accessories ... 3 Set the VOLTAGE SELECTOR Switch ... 3 How To Put Batteries In the Remote Control... 3 Using the Remote Control ... 4 Connecting the FM Antenna... 4 Connecting the AM Antenna... 5 Connecting the Speakers ... 5 Connecting a TV... 6 Connecting External Equipment... 6 Connecting to the Wall Outlet ... 6 DEMO Mode ... 6 COMPU Play... 6 Basic Operations...7 Turning the Power On and Off ... 7 Adjusting the Volume... 7 Fade-out Muting (FADE MUTING) ... 8 Reinforcing the Bass Sound (ACTIVE BASS EX.)... 8 Selecting the Sound Mode (SOUND MODE)... 8 Entering the Number with the Remote Control (Numeric Keys)... 8 Using the Tuner ...9 Tuning In a Station ... 9 Presetting Stations ... 10 To Change the FM Reception Mode ... 10 Using the CD Player (Digital Audio CDs, MP3 Discs) ...11 To Load CDs ... 12 To Unload CDs... 12 Basics of Using the CD Player-Normal Play... 13 Programming the Playing Order of the Tracks... 13 Random Play... 14 Repeating Tracks ... 15 Tray Lock Function ... 15 MP3 Discs Playback... 15 Using the Video CD Player (Video CDs)...16 Setting the TV System... 16 Selecting the Audio Channel ... 16 Playing Video CDs with PBC Function (VCD 2.0) ... 17 Playing Video CDs with PBC Functions without Using the PBC Function (PBC OFF)... 18 Playing Video CDs without the PBC Function ... 18 Various Functions to Enhance Your Enjoyment ... 18 Using the Cassette Deck (Listening to a Tape) ...20 Playing a Tape ... 20 Using the Cassette Deck (Recording) ...21 Standard Recording ... 22 CD Synchro Recording... 22 Tape to Tape Recording (DUBBING)... 22 Using an External Equipment ...23 Listening to the External Equipment ... 23 Using the Timers ...24 Setting the Clock ... 24 Setting the Daily Timer ... 25 Setting the REC (Recording) Timer ... 26 Setting the SLEEP Timer ... 28 Timer Priority ... 28 Using the Microphone...29 Singing Along with Karaoke ... 29 Microphone Mixing... 30 Playing the Microphone Sound through the Speakers... 30 Care And Maintenance...31 Troubleshooting ...32 Specifications ...32, MX-K350V[US].book Page 3 Tuesday, June 11, 2002 9:32 AM

Getting Started Accessories

Make sure that you have all of the following items, which are supplied with the System. AM Loop Antenna (1) Remote Control (1) Batteries (2) FM Wire Antenna (1) Video Cord (1) AC Plug Adaptor (1) If any of these items are missing, contact your dealer immediately.

Set the VOLTAGE SELECTOR Switch

To avoid damaging the System, set the voltage before plugging in the System. Set the correct voltage for you area with the VOLTAGE SELECTOR switch on the back of the Unit. Use a screwdriver to rotate the selector so the number the voltage mark is pointed at is the same as the voltage. Voltage mark

CAUTION:

• Make all connections before plugging the System into an AC power outlet.

How To Put Batteries In the Remote Control

Match the polarity (+ and –) on the batteries with the + and – markings in the battery compartment. R6P(SUM-3)/AA(15F)

CAUTION:

• Handle batteries properly. ❏ To avoid battery leakage or explosion: • Remove batteries when the Remote Control will not be used for a long time. • When you need to replace the batteries, replace both batteries at the same time with new ones. • Do not use an old battery with a new one. • Do not use different types of batteries together., MX-K350V[US].book Page 4 Tuesday, June 11, 2002 9:32 AM

Getting Started Using the Remote Control The Remote Control makes it easy to use many of the functions of the System from a distance of up to 7m away. You need to point the Remote Control at the remote sensor on the System’s fron panel.

3-CD PLAY & EXCHANGE CD-R/RW PLAYBACK

SOUND

COMPACT COMPONENT SYSTEM MX-K350V REPEAT MODE 1 BIT DUAL D/A

CONVERTER PROGRAM C

E LASSIC

RANDOM

STANDBY STANDBY/ON CANCEL SET KIP S / DEMO PRESET C Remote sensor PREV. NEXT D

IS

AUX FM CD TAPE / AM 3 PHONES CD

TUNING

REC START CD SELECT VCD NUMBER / STOP REC START DUBBING ACTIVE 2 BASS EX. CD MIC MIC LEVEL PBC RETURN CLOCK TAPEKEY CONTROL /TIMER A / B

CD

MIN MAX EJECT EJECT A PLAY FULL - LOGIC CONTROL CD SYNCHRO RECORDINGREC / PLAYB

CAUTION:

• Make all connections before plugging the System into an AC power outlet.

Connecting the FM Antenna Using the Supplied Wire Antenna

FM wire antenna (supplied) Extend the supplied FM Wire Antenna horizontally. Strip vinyl shield from cut line, twist wire core.

Using an FM 75-Ohm Antenna Cable (not Supplied) If reception is poor, connect the outside antenna.

Outdoor FM antenna cable (not supplied) • Before attaching a 75 ohm coaxial lead (the kind with a round wire going to an outdoor antenna), disconnect the supplied

FM Wire Antenna. VOLUM ROCK P PO

, MX-K350V[US].book Page 5 Tuesday, June 11, 2002 9:32 AM

Getting Started Connecting the AM Antenna Rear Panel of the Unit

Turn the loop until you have the best reception. AM loop antenna (Supplied) Attach the AM loop to its base by snapping the tabs on the loop into the slot in the base. AM antenna wire (not supplied) If reception is poor, connect the outside antenna. • Even when connecting an outside AM antenna, keep the indoor AM loop connected.

CAUTION:

• To avoid noise, keep antennas away from the System, the connecting cord and the AC power cord.

Connecting the Speakers

1. Open each of the terminals to connect the speaker wire leads. 2. Connect the speaker cords to the Speaker terminals of the Unit. Connect the red (+) and black (–) cords of the right side speaker to the red (+) and black (–) terminals marked RIGHT on the System. Connect the red (+) and black (–) cords of the left side speaker to the red (+) and black (–) terminals marked LEFT on the System. 3. Close each of the terminals to securely connect the cords. Right side (rear view) Left side (rear view) Red Black Black Red

CAUTIONS:

• A TV may display irregular colors if located near the speakers. If this happens, set the speakers away from the TV. • Use speakers with the correct impedance only. The correct impedance is indicated on the rear panel., MX-K350V[US].book Page 6 Tuesday, June 11, 2002 9:32 AM Getting Started

Connecting a TV

Connect a video cord (supplied) between the System’s VIDEO OUT terminal and the video input jack of your TV. • Do not connect a cable between the LINE-OUT terminals and the audio input terminals of an external TV. If it is connected, noise may be generated depending on the TV to be used. Video cord (supplied) TV (not supplied)

Connecting External Equipment

Connect a signal cord (not supplied) between the System’s AUX-IN terminals and the output terminals of the external MD recorder, tape deck, etc. You can then listen to the external source through the System. Signal cord (not supplied) MD recorder, tape deck, etc. (not supplied) Pin-plugx2Pin-plugx2

Connecting to the Wall Outlet

Plug the AC power cord into the wall outlet. Now, your System is at your command!

DEMO Mode

When the System is connected to the wall outlet, a DEMO mode displaying some of the system’s features automatically starts. To turn the DEMO display off, press any of the operation buttons. The DEMO display automatically stops. To turn the DEMO display on, press the DEMO button on the Unit for more than 2 seconds.

CANCEL

/ DEMO (For 2 seconds)

COMPU Play

JVC’s COMPU PLAY feature lets you control the most frequently used System functions with a single touch. With One Touch Operation you can play a CD, a tape, turn on the radio, or listen to an external equipment with a single press of the play button for that function. One Touch Operation turns the power on for you, then starts the function you have specified. If the System is not ready (no CD or tape in place), the System still powers on so you can insert a CD or tape. How One Touch Operation works in each case is explained in the section dealing with that function. The COMPU PLAY buttons are:

On the Unit On the Remote Control

CD 6 button CD 6 button FM/AM button FM/AM button TAPE 3 button TAPE 3 button AUX button AUX button CD1, CD2 and CD 3 buttons CD1, CD2 and CD 3 buttons CD Open/Close 0 button, MX-K350V[US].book Page 7 Tuesday, June 11, 2002 9:32 AM

Basic Operations

) 3-CD PLAY & EXCHANGE CD-R/RW PLAYBACK STANDBY/ON SOUNDCOMPACT COMPONENT SYSTEM MX-K350V REPEAT MODE % STANDBY/ON 1 BIT DUAL D/ACONVERTER SOUND MODE

PROGRAM

SLEEP C Display E LASSIC Numeric RANDOMAUX keys STANDBY STANDBY/ON CANCEL SET VOLUME

KIP

FM MODE FM /AM STANDBY indicator S/ DEMO PREV. PRESET NEXT

DIS C

% STANDBY/ON VIDEO INTRO ON SCREEN HIGHLIGHT AUX FM CD TAPE / AM 3 PHONES CD PREV. NEXT TUNING PHONES VCD NUMBERREC START CD SELECT / STOP REC START DUBBING ACTIVE 2 BASS EX. CD MIC MIC LEVEL ACTIVE PBC RETURN KEY CONTROL CLOCK TAPE /TIMER A / B D 1C STILL RETURN MIN MAX BASS EX. CD1 CD2 CD3 CD

PROGRAM

REPEAT SELECT/RANDOM EJECT EJECT

TAPE

A/B TAPE KEY CONTROL MPX A PLAY FULL - LOGIC CONTROL CD SYNCHRO RECORDINGREC / PLAYB SOUND SOUND MODE KARAOKE

MODE

ACTIVE FADE BASS EX. ECHO MUTING VOLUME +,–

ACTIVE

BASS EX. VOLUME FADE MUTING Various information BASS BASS indicator S.MODE Sound Mode indicator Level bar Status bar (Indicates various statuses.) * When the System is in use, the display shows other items as well. For simplicity, we show here only the items described in this section. • Some power is always consumed even though power is

Turning the Power On and Off turned off (called Standby mode).

• To switch off the System completely, unplug the AC power cord from the wall outlet. When you unplug the AC power

Turning the System On cord, the clock will be reset to 0:00 immediately.

1 Press the % STANDBY/ON button. STANDBY/ON Adjusting the Volume STANDBY STANDBY/ON or Turn the VOLUME control on the Unit clockwise to increase the volume or turn it counterclockwise to decrease the volume.

Press the VOLUME + button on the Remote Control to increase The display comes on and “WELCOME” is displayed once. the volume or press the VOLUME – button on the Remote Control The STANDBY indicator goes out. to decrease the volume. The System comes on ready to continue in the mode it was in

when the power was last turned off. • For example, if the last thing you were doing was listening to a CD, you are now ready to listen to a CD again. If you You can set the volume level to MIN, 1-31, or MAX. wish, you can change to another source. • If you were listening to the Tuner last, the Tuner comes on CAUTION: playing the station it was last set to. • DO NOT turn on the System and/or start playing

Turning the System Off any source without first setting the VOLUME

control to minimum, as a sudden blast of sound 1 Press the % STANDBY/ON button again. could damage your hearing, speakers and/or STANDBY/ON headphones. STANDBY STANDBY/ON or For private listening

Connect a pair of headphones to the PHONES jack. No sound

“GOOD BYE” is displayed and the display goes out, except comes out of the speakers. for the clock display. The STANDBY indicator lights up. (The Be sure to turn down the volume before connecting or putting on display is dimmed.) headphones.

VOLUM ROCK PO P

, MX-K350V[US].book Page 8 Tuesday, June 11, 2002 9:32 AM Basic Operations

Fade-out Muting (FADE MUTING) Entering the Number with the

You can mute the output with one touch operation. Remote Control (Numeric Keys) To muting the output, press the FADE MUTING button on the You will use the number keys on the Remote Control to enter num- Remote Control. The output is faded out. bers for presetting stations, recalling the preset stations, or pro- To release muting, press the FADE MUTING button once gramming the playing tracks on CDs. again. The output is faded in to the previous level. How to enter the number with the number keys is explained here. • After Fade-out Muting, turning the VOLUME control on the Examples: unit or pressing the VOLUME button on the Remote Control • To enter number 5, press 5. will increase the volume from MIN. setting. • To enter number 15, press +10, then 5. • To enter number 20, press +10, then 10.

Reinforcing the Bass Sound • To enter number 25, press +10, +10, then 5.

(ACTIVE BASS EX.) The richness and fullness of the bass sound is maintained regard- less of how low you set the volume. You can use this effect only for playback. To get the effect, press the ACTIVE BASS EX. (Extension) button. The “BASS” indicator lights up and “ACTIVE BASS EXTEN- SION” appears on the display. To cancel the effect, press the button again. The “BASS” indicator goes out and “OFF” appears on the display.

Selecting the Sound Mode

(SOUND MODE) You can select one of 3 SEA (Sound Effect Amplifier) modes. You can use this effect only for playback.

On the Unit

To get the effect, press one of the Sound Mode buttons, ROCK, POP, or CLASSIC. The selected Sound Mode name “ROCK”, “POP”, or “CLASSIC” appears on the display. The “S.MODE” indicator also lights up on the display. To cancel the effect, press the currently selected mode button again. When the effect is canceled, the “S.MODE” indicator goes out. For example, if the current Sound Mode is ROCK, press the ROCK button again. “FLAT” appears on the display, showing that no sound effect is applied. ROCK Boosts low and high frequencies. Good for acoustic music. POP Good for vocal music. CLASSIC Set for wide and dynamic sound stereo systems. FLAT No sound effect applies.

On the Remote Control

Press the SOUND MODE button until Sound Mode you want ap- pears on the display. The “S.MODE” indicator lights up on the display. Each time you press the button, the Sound Mode changes as fol- lows: ROCK = POP = CLASSIC = FLAT = (back to the beginning) To cancel the effect, press the SOUND MODE button until “FLAT” appears on the display. The “S.MODE” indicator goes out., MX-K350V[US].book Page 9 Tuesday, June 11, 2002 9:32 AM

Using the Tuner

3-CD PLAY & EXCHANGE CD-R/RW PLAYBACK STANDBY/ON SOUNDCOMPACT COMPONENT SYSTEM MX-K350V REPEAT MODE 1 BIT DUAL D/A

CONVERTER

SLEEP Numeric PROGRAM CLA E SSI

C

keys RANDOM

AUX

STANDBY STANDBY/ON CANCEL SET 4

IP SK

FM MODE FM /AM / DEMO PRESET C PREV. NEXT ISD FM/AM SET ¢SCREE VIDEO INTRO ON N HIGHLIGHT AUX FM CD TAPEFM MODE PREV. NEXT FM/AM / AM 3 PHONES CD

TUNING

SELECT VCD NUMBER REC START CD / STOP REC START DUBBING ACTIVE 2

D

BASS EX. C MIC MIC LEVEL CLOCK TAPE PBC RETURN KEY CONTROL /TIMER A / B

CD

STILL RETURN MIN MAX CD1 CD2 CD3 CD ¡ PROGRAM SELECT REPEAT /RANDOM EJECT EJECT

TAPE TAPE

A/B KEY CONTROL MPX A PLAY FULL - LOGIC CONTROL CD SYNCHRO RECORDINGREC / PLAYB

SOUND

MODE KARAOKE ACTIVE FADE BASS EX. ECHO MUTING

VOLUME

Band display, Frequency display, Preset channel kHz MHz

MONO ST

FM mode indicators * When the System is in use, the display shows other items as well. For simplicity, we show here only the items described in this section.

You can listen to FM and AM stations. Stations can be tuned in One Touch Radio

manually, automatically, or from preset memory storage. Just press the FM/AM button to turn on the System and start play- ❏ Before listening to the radio: ing the station you were last tuned to. • Make sure that both the FM and AM antennas are correctly ❏ You can switch from any other sound source to the radio by connected. (See pages 4 and 5). pressing the FM/AM button.

Setting the AM Tuner Interval Spacing When shipped, the AM tuner interval is set to 9 kHz spacing Tuning In a Station

(50 kHz spacing for FM broadcast). You can change it to 10 kHz spacing.

To select 10 kHz intervals, while holding down the ¢ button 1 Press the FM/AM button.

on the Unit in Standby mode, press the % button on the Unit to The Band and Frequency you were last tuned to appear on the turn on the power (at the same time, the 100 kHz spacing is select- display. ed for FM broadcast). (If the last station was selected using the preset number, the

To select 9 kHz intervals again, while holding down the 4 preset number appears first.)

button on the Unit in Standby mode, press the % button on the Each time you press the button, the band alternates between

Unit to turn on the power. FM and AM.

[10 kHz Intervals] [9 kHz Intervals] FM /AM

FM

/ AM or STANDBY STANDBY/ON STANDBY STANDBY/ON (on the Unit) (on the Remote Control)

VO LU M ROC K OP P

, MX-K350V[US].book Page 10 Tuesday, June 11, 2002 9:32 AM Using the Tuner 2 Select a station using one of the following Using the Unit methods. 1 Select a band by pressing the FM/AM button. • Manual Tuning Briefly press the or button on the Unit to move 2 Press the 22 or ¡ button to tune in a22 ¡ from frequency to frequency until you find the station you station. want. 3 Press the SET button. OR “SET” will blink for 10 seconds. • Auto Tuning If you hold down the 22 or ¡ button on the Unit for14Press the 4 or ¢ button to select the second or more and then release it, the frequency changes preset number. down, or up, automatically until a station is found. ¢: Increases the preset number by 1. OR 4: Decreases the preset number by 1. • Preset Tuning (Possible only after presetting sta- tions) 5 Press the SET button. Preset tuning using the Unit: “STORED” appears and, after 2 seconds, the display returns to Select the preset number you want, using the 4 or ¢ the band/frequency display. button. 6 Repeat above steps 1 to 5 for each station Example: you want to store in memory with a preset Press the ¢ button until the preset number “P-12” appears on the display. After 2 seconds, the display will show the number. preset number’s band and frequency. To change the preset stations, repeat the same steps as above.

PRESET

or (After 2 seconds) • In step 4, you can select the preset number using the nu- kHz MHz meric keys on the Remote Control. See “Entering the Preset tuning using the Remote Control: Number with the Remote Control” on page 8. Enter the preset number you want to recall using the numer- ic keys. See “Entering the Number with the Remote Con- trol” on page 8. CAUTION: Example: • Even if the System is unplugged or if the power failure occurs, the preset stations will be stored Press +10, then 2 to recall the preset number 12. After 2 sec- onds, the display will show the preset number’s band and for a few days. However, in case the preset sta- frequency. tions are erased, you will need to preset the sta- tions again. • In AM broadcast, reception sensitivity will be changed by To Change the FM Reception turning the AM loop antenna. Turn the AM loop antenna Mode for best reception. When you are tuned in to an FM stereo broadcast, the “ST (Ster- eo)” indicator lights up and you can hear stereo effects.

Presetting Stations If an FM stereo broadcast is hard to receive or noisy, you can select

Monaural mode. Reception improves, but you lose stereo effect. You can preset up to 30 FM stations and up to 15 AM stations. Press the FM MODE button on the Remote Control so that the “MONO” indicator lights up on the display. FM MODE • Preset numbers may have been set to factory test fre- quencies prior to shipment. This is not a malfunction. You ST MONO can preset the stations you want into memory by following one of the presetting methods below. To restore the stereo effect, press the FM MODE button on • During presetting stations, if no button operation is made the Remote Control so that the “MONO” indicator goes off. for 10 seconds, the display returns to the band/frequency display. In this case, repeat steps from the beginning.

TUNING FM

SET SET / AM or FM=30, AM=15 When changing the Band, MX-K350V[US].book Page 11 Tuesday, June 11, 2002 9:32 AM

Using the CD Player (Digital Audio CDs, MP3 Discs)

3-CD PLAY & EXCHANGE CD-R/RW PLAYBACK STANDBY/ON SOUND 7 COMPACT COMPONENT SYSTEM MX-K350V REPEAT MODE Numeric 1 BIT DUAL D/ACONVERTER keys SLEEP PROGRAM CD Open/CLA CE SSI Close 0

RANDOM AUX CANCEL

STANDBY STANDBY/ON CANCEL SET

IP SK

FM MODE FM /AM / DEMO PREV. PRESET NEXT C

IS D

SET DISC SKIP

SCRE

VIDEO INTRO ON EN HIGHLIGHT AUX FM CD TAPE ¢ CD / AM4 ¢ 6 3PHONES CD

TUNING

PREV. NEXT SELECT VCD NUMBERREC START CD / STOP REC START DUBBING ACTIVE 2 CD1-CD3

D

BASS EX. C MIC MIC LEVEL CLOCK TAPE PBC RETURN KEY CONTROL /TIMER A / B

CD

7 MIN MAX STILL RETURN 22 CD1 CD2 CD3 CD ¡ CD1-CD3 CD 6 PROGRAM SELECT REPEAT /RANDOM EJECT EJECT

TAPE TAPE

REPEAT A/B A PLAY FULL - LOGIC CONTROL CD SYNCHRO RECORDINGREC / PLAYB KEY CONTROL MPX

PROGRAM

/RANDOM SOUNDMODE KARAOKE ACTIVE FADE BASS EX. ECHO MUTING VOLUME Track number, Playing time, Program number, etc. Disc indicators123PRGM REPEAT RANDOM ALL1CD Play mode Repeat indicator indicator * When the System is in use, the display shows other items as well. For simplicity, we show here only the items described in this section.

The CD Player has the rotational disc tray that can accommodate About the Disc Indicator

3 CDs. The unit can play back the following types of disc: Digital Disc Number indicator

Audio CD, MP3 disc, CD-R, CD-RW. You can use Normal, Program, Random, or Repeat Play. Normal Play: Can continuously play all the tracks on all Selected Disc indicator

the CDs. 1

Program Play: Can play all the programmed tracks on all Disc Rotation indicator

the CDs in the programmed order. The Disc indicator consists of the following three kinds of indicators:

Random Play: Can play all the tracks on all the CDs in ran-

dom order. Disc Number indicator: Lights all the time.

Repeat Play: Can repeat all the tracks on all the CDs, the Selected Disc indicator:Lights for the currently selected

tracks on one of the CDs, or just one of disc number. tracks on one CD. Disc Rotation indicator:Runs when the selected CD is playing or paused. This indicator goes out if a CD is not loaded for

CAUTIONS: the selected disc number.

• When you use Program Play or Random Play, Once the tray is ejected, the Disc use only Audio CDs. Otherwise, the System Rotation indicators for all discnumbers are lit. However, when does not work properly. the empty disc number is select-

If system error occurs, please recover it by turn- ed, the Disc Rotation indicator for

ing off the power once or by changing the source the disc number goes out. mode to others. Then,eject the tray and remove the disc which is not supported. • Some MP3 discs may not be properly played back due to their disc format.

Here are the basic things you need to know to play CDs and locate

the different tracks on them.

VO LU M ROC K OP P

, MX-K350V[US].book Page 12 Tuesday, June 11, 2002 9:32 AM Using the CD Player (Digital Audio CDs, MP3 Discs)

Example of indication: ❏ When you use an 8 cm CD, place it on the inner circle of the tray.

When CD door has ejected once and then ❏ You can load CDs while listening to the other source. CD-1 is pressed. (DISC1 is selected) ❏ When power is turned off with the tray opened, the tray is auto- Shows that this disc number is selected. matically closed. ❏ If the CD cannot be read correctly (because it is scratched, for123example), “ 0 0:00” appears on the display.

To Unload CDs

Shows that the disc is rotating. Take out the CD as shown below. 1 While the CD Player is stopped, press the CD

One Touch Play Open/Close 0 button on the Unit to open the

The power comes on, and operations are done automatically. tray. ❏ By pressing the CD 6 button, the System will come on, and if a CD is loaded for the disc number that was lastly selected, it 2 Remove the CD, then press the DISC SKIP will start playing from the first track. button on the Unit. ❏ By pressing the CD1-CD3 button, the System will come on, and The tray turns for the next CD. if a CD is already loaded for the selected disc number, it will start play from the first track. 3 Repeat step 2 to remove all the CDs. 4 Press the CD Open/Close 0 button on the

To Load CDs Unit to close the tray.

❏ You can remove CDs while listening to the other source. 1 Press the CD Open/Close 0 button on the Unit to open the tray. • You can also remove the CDs during playback. However, 2 Place a CD, with its label side up, onto the in this case, you can only remove the CDs that are not be- tray. ing played back. Be sure that the CD is securely seated on the disc tray. With the label side up STANDBY STANDBY/ON CANCEL SET

IP SK

/ DEMO PRESET

DIS C

3 Press the DISC SKIP button on the Unit and place the next CD. When you press the button, the tray turns for the next CD. 4 Repeat step 3 for the last CD. 5 Press the CD Open/Close 0 button on the Unit. The tray is closed. • When placing a disc in the tray, be sure to position the disc inside the recess correctly. Otherwise, the message “No disc” will appear in the display, and the disc may be damaged or the Unit may be damaged when the tray is opened, or it may be difficult to remove the disc from the Unit., MX-K350V[US].book Page 13 Tuesday, June 11, 2002 9:32 AM

Using the CD Player (Digital Audio CDs, MP3 Discs) To Select a Track Basics of Using the CD Player- Normal Play During playback (using the 4 or ¢ button):Briefly press the 4 or ¢ button to select the track you want to

play.

To Play CDs By pressing the button, you can skip to the next track or skip backto the previous track.

1 Load CDs. • The selected track starts playing.• Press the ¢ button once to skip to the beginning of the next 2 Press one of the Disc button (CD1-CD3) you track. (You can skip to the next CD (e.g. CD-1 = CD-2 = want to play. CD-3).)• Press the 4 button to skip to the beginning of the current The selected disc number (e.g. “CD-1”) appears on the dis- track. Press twice quickly to skip to the beginning of the previ- play. ous track. (You cannot skip back to the previous CD.) The first track of the selected CD begins playing. When the first CD finishes playing, the next and the third CDs are con- In Stop mode (using the 4 or ¢ button): tinuously played back. By briefly pressing the 4 or ¢ button, the CD Player operates When the last CD has finished playing, the CD Player auto- in the same way as during playback, except the following points. matically stops. • The buttons are effective only for the currently selected CD. Examples: Using the numeric keys on the Remote Control: CD1 = CD2 = CD3 = (stop) Using the numeric keys, you can directly select the track on the CD2 = CD3 = CD1 = (stop) currently selected CD. • The selected track starts playing. ❏ You can start to play the currently selected disc by simply press- For example, press +10, then 5 to play back the track number 15. ing the CD 6 button. See “Entering the Number with the Remote Control” on page 8. While playing the CD, the following will appear on the display. Search Play123Holding down the following buttons, during playback, will fast forward/backwards the CD. • 22 or ¡ button on the Unit • 4 or ¢ button on the Remote Control Track number Elapsed CD is playing. Programming the Playing Order playing time • When the Disc button (CD1-CD3) is pressed with the tray of the Tracks opened, the tray is closed and the selected CD automatically begins playing. You can program the playing order of the tracks on all the CDs. To stop playing the CD, press the 7 button. The following in- Note that you can only make a program when the CD Player is formation for the CD is displayed. stopped. ❏ You can program up to 32 tracks in any desired order including123the same tracks.

To Make a Program

1 Load CDs Total track number Total playing time 2 In Stop mode, set the CD Player in Program To pause, press the CD 6 button. The playing time indication Play mode. blinks on the display. On the Unit To cancel pause, press the CD 6 button again. Play continues Press the PROGRAM button to light the “PRGM” indicator on the from the point where it was paused. display. To remove the CD, stop playing and press the CD Open/Close At the same time, “PROGRAM” appears on the display. 0 button on the Unit. On the Remote Control Tips: Press the PROGRAM/RANDOM button until “PROGRAM” ap- • Playing back the CD using the DISC SKIP button pears on the display. You can also play the CDs using the DISC SKIP button. During The “PRGM” indicator also lights up on the display. playback, each time you press the button, the next CD is automat- Each time you press the button, the display changes as follows: ically played back. If the next disc tray is empty, the disc tray is PROGRAM = RANDOM = Blank display (Normal Play) = automatically skipped. (back to the beginning) • Removing/changing the CDs during playback • If a program is already made, the last step of the program will While playing back a CD (e.g. CD-1), you can remove or change be displayed. the other CDs (e.g. CD-2 and CD-3) by pressing the CD Open/ Close 0 button. After removing or changing, press the same but- ton to close the tray., Body.fm Page 14 Monday, July 22, 2002 2:32 PM Using the CD Player (Digital Audio CDs, MP3 Discs) 3 Press one of the Disc button (CD1-CD3) to To Exit and Re-enter Program Play select the CD you want to program. The program you have made is stored in memory. So, you can exit The display will change to the Program Entry display. Program Play temporarily or re-enter Program Play unless you de-lete the program. CD1 To exit the program mode once, while the CD Player is D 1C stopped, press the PROGRAM button on the Unit or the PRO- or GRAM/RANDOM button on the Remote Control to light off the “PRGM” indicator. By changing the source to the other (e.g. Tun- er), the CD Player also exits Program Play mode. Disc number Track number To re-enter Program Play mode, press the PROGRAM or PROGRAM/RANDOM button until the “PRGM” indicator lights 4 Select the track you want to program. up again. Using the Unit While the display is blinking, press the 4 or ¢ button to select Random Play the track, then press the SET button within 10 seconds. The program order number will be assigned from P-1. The tracks of all the CDs will play in no special order when you PRESET use this mode. • To use Repeat Play for Random Play, press the REPEAT but- or ton to select “ALL” or “1” before starting playback. For details, see “Repeating Tracks”mentioned below. Disc number Track number 1 In Stop mode, set the CD Player in Random

SET

Play mode. On the Unit Press the RANDOM button to light the “RANDOM” indicator. Program order number At the same time, “RANDOM” appears on the display. On the Remote Control Using the Remote Control Press the PROGRAM/RANDOM button until the “RANDOM” Press the numeric keys to directly enter the track number. Then, appears on the display. the program order number will be assigned from P-1. The “RANDOM” indicator also lights up on the display. • To delete the current program step, press the CANCEL button Each time you press the button, the display changes as follows: on the Unit. PROGRAM = RANDOM = Blank display (Normal Play) = 5 (back to the beginning)Repeat steps 3 and 4 to program other tracks on the same CD or the other CD. 2 Press the CD 6 button. The tracks on all the CDs are played in random order. 6 To play the program, Press the CD 6 but- To stop playing, press the 7 button. ton. To skip a track during playback, press the ¢ button to For details, see “To Play the Program You Have Made” men- jump to the next track in the random sequence. tioned below. To exit Random Play mode, while the CD Player is stopped, press the RANDOM button on the Unit or the PROGRAM/RAN- To confirm the program, while the CD player is stopped with DOM button on the Remote Control again to light off the “RAN- the “PROG” indicator lit on the display, press the 4 or ¢ but- DOM” indicator. Normal Play resumes. ton on the Remote Control. To delete all the tracks in the program, while the CD Player is stopped, press the 7 button. To Modify the Program, while the CD Player is stopped, press the CANCEL button, the last track in the program is deleted. To add new tracks to the end of the program, repeat above steps 3 and 4. • If you try to program a track number that does not exists on the CD, your entry will be ignored. • If you try to program the 33rd track, “FULL” appears on the display.

To Play the Program You Have Made

Press the CD 6 button. The System plays the tracks in the order you have programmed them. • To use Repeat Play for Program Play, press the REPEAT but- ton to select “ALL” or “1” before starting playback. For details, see “Repeating Tracks” on page 15. ❏ You can skip to a particular program track by pressing the 4 or ¢ button during Program Play. ❏ To stop playing, press the 7 button once. If you press the 7 but- ton, while the CD Player is stopped, the program is deleted., MX-K350V[US].book Page 15 Tuesday, June 11, 2002 9:32 AM

Using the CD Player (Digital Audio CDs, MP3 Discs) Repeating Tracks MP3 Discs Playback

You can repeat all tracks or individual track, as many times as you You can play back MP3 discs. In addition to normal playback, you like. can use Random, Program,or Repeat Play, if the disc format is Press the REPEAT button. proper. The Repeat indicator changes with each press of the button, as fol- lows: About MP3 discs ALL= 1CD = 1 = Blank display = (back to the beginning) An MP3 disc can have several folders (groups). Tracks are con- REPEAT ALL: In Normal Play mode, repeats all the tracks on tained within the groups. The player will only recognize up to 64 all the CDs. groups. Total number of tracks recognizable is 255. In Program Play mode, repeats all the tracks in the program. Recording your own MP3 discs. In Random Play mode, repeats all the tracks on • Disc format should be set to “ISO 9660”. all the CDs in random order. • Multisession recording is not supported. REPEAT 1CD: Repeats all tracks on one CD. (Selectable in • The disc must be finalized. Normal Play only) • Files other than MP3s will be ignored. REPEAT 1: Repeats one track.

MP3 Basic Operations

To stop playing, press the 7 button. Changing the source to the other (e.g. Tuner) will also stop playing. The track number being selected will be displayed on the Unit. To exit Repeat mode, press the REPEAT button until the Re- 1 Load an MP3 disc. peat indicator on the display goes out. ❏ Repeat mode remains in effect (except REPEAT 1CD) during 2 Press the 4 or ¢ button on the Unit to the following Play Mode changing: select the track and then press the CD 6 a. PROGRAM PLAY MODEÔNORMAL PLAY MODE button to play. b. RANDOM PLAY MODE ÔNORMAL PLAY MODE The next track will be played after the current track is finished. c. PROGRAM PLAY MODEÔRANDOM PLAY MODE On the Remote Control You can also use the numeric keys to directly select the track. The

Tray Lock Function selected track automatically starts playing back.For example, to play back the track number 25, press +10, +10,

then 5. See “Entering the Number with the Remote Control (Nu- In order to safely keep the CD in the CD Player, the tray can be meric Keys)” on page 8. electronically locked. When the electronic lock is on, the tray cannot be opened even if 3 Press the 7 button to stop playing. the CD Open/Close 0 button on the Unit is pressed.

Locking the Tray

• If the disc format of the MP3 disc being used is improper, 1 Turn on the System and enter CD mode. you can not use Random Play, Program Play, Repeat 2 While pressing down the 7 button, press the Play, and Search Play (fast forward/backwards). Aboutoperation, see page 13, 14 and 15. CD Open/Close 0 button on the Unit. • If system error occurs, please recover it by turning off the “LOCK ON” appears on the display. power once or by changing the source mode to others. Then, eject the tray and remove the disc which is not sup- ported. • If you try to open the tray by pressing the 0 button, “LOCK On Screen Display ON” appears on the display to let you know that the tray has You can see the Single Elapsed Time on the TV screen when you been locked. press the ON SCREEN button on the Remote Control.

Unlocking the Tray

Repeat above steps 1 and 2. “LOCK OFF” appears on the display. Now, you can use the tray normally., MX-K350V[US].book Page 16 Tuesday, June 11, 2002 9:32 AM

Using the Video CD Player (Video CDs)

3-CD PLAY & EXCHANGE CD-R/RW PLAYBACK STANDBY/ON SLEEP SOUNDCOMPACT COMPONENT SYSTEM MX-K350V 4 REPEAT MODE1 BIT DUAL D/A CONVERTER ¢ Numeric AUX PROGRAMSET CLE ASSIC Keys FM MODE FM /AM ON SCREEN RANDOM STANDBY STANDBY/ON CANCEL SET VIDEO INTRO VIDEO INTRO ON SCREEN HIGHLIGHT HIGHLIGHT SKIP/ DEMO PRESET ISCCD PREV. NEXT D6 4 PREV. NEXT ¢ AUX FM CD TAPE / AM 3 PHONES CD

TUNING

STILL SELECT VCD NUMBERSTILL RETURN & RETURN 22 REC START CD / STOP REC START DUBBING ACTIVE 2 ¡ BASS EX. CD MIC MIC LEVEL CD1 CD2 CD3 CD PBC RETURN KEY CONTROL CLOCK TAPE 7 /TIMER A / BCD 6 CD 1MIN MAX

PROGRAM

REPEAT SELECT/RANDOM PBC

TAPE

A/B TAPE KEY & RETURN EJECT EJECT 0 EJECT KEY CONTROL MPX CONTROL I MPX SOUND KEY CONTROL (Deck B)KEY MODE KARAOKE I, i A PLAY FULL - LOGIC CONTROL CD SYNCHRO RECORDINGREC / PLAYBCONTROL i ACTIVE FADE BASS EX. ECHO MUTING

VOLUME

Track number, Playing time, Program number, etc. Disc indicators123PBC PRGM REPEAT RANDOM ALL1CD Play mode indicator Repeat indicator * When the System is in use, the display shows other items as well. For simplicity, we show here only the items described in this section.

You can play video CDs (with or without the Playback Control

(PBC) function) to watch the picture on your TV while listening to 3 While pressing and holding the 7 button on the sound on video CDs. the Unit, press the SET button on the Unit to

SVCDs and DVDs cannot be used. select the TV system.

Each time you press the SET button, the TV system changes as ❏ Before playing video CDs follows. • Make sure that the connection between the System and your

TV is correct. (See page 6.) PAL NTSC PAL: for PAL exclusive TV NTSC: for NTSC exclusive TV Setting the TV System

(Using the Unit) • During disc searching, this function does not respond.

Initial setting of the TV system. • If you play a CD of NTSC system in NTSC system on a

The initial (TV System) setting for video output, of this unit, PAL exclusive TV, the image may be distorted. If this hap- is the PAL video system.If you are using a TV that uses the pen, change to “PAL”. NTSC TV system, change the TV system as follows:

To view a picture of video CDs, it is required to set the System’s TV system according to your TV system. Selecting the Audio Channel Relationship among the playable CDs, System’s TV sys-

tem and your TV system: This function may be used for video CDs that support multiplex

Playable CD System’s TV system Your TV system function. In addition to the normal stereo sound output, you can se-

lect L channel or R channel independently.

NTSC/PAL NTSC NTSC NTSC/PAL PAL PAL Press the MPX button on the Remote Control.

Each time you press the button, the selected channel changes as follows: 1 Turn on the TV and select the video input on NORMAL (Stereo) = Lch MONO = Rch MONO = (back to the the TV. beginning) • When “Lch MONO” or “Rch MONO” is selected, the first push 2 Turn on the System and press the CD 6 of the button will show the current selection. button. • The channel selection returns to “NORMAL (Stereo)” when the CD is ejected or changed, or other source (e.g. FM/AM) is selected, or when the system is turned off.

VOLUM ROCK P PO

, MX-K350V[US].book Page 17 Tuesday, June 11, 2002 9:32 AM

Using the Video CD Player (Video CDs)

2. Press the SELECT button to play it back.

Playing Video CDs with PBC Function (VCD 2.0) CD SELECT

The System provides a Playback Control (PBC) function which utilizes a procedure (menu selection) programmed in a video CD. • The next item will be automatically played after the current What is the Playback Control (PBC) function? item is finished. The PBC function allows you to enjoy the following features. • Menu-driven playback On the Remote Control You can interact with the TV screen using a menu display to se- Press the numeric keys to select the item number and start the play- lect and play an entry. back. • High-resolution still image display You can display high-quality images four times clearer than vid- eo pictures. ❏ For operation, refer to the instructions supplied for the video CD. ❏ You can play video CDs with PBC function using the interactive play or without using the PBC function (Continuous Play). To pause, press the STILL button on the Remote Control. To resume pause, press the STILL button on the Remote Con- • The playback operation procedure may differ depending trol. on the video CD you use. To stop playback, press the 7 button on the Unit. To select other item during menu selection status, repeat • Sometimes due to improper manufacturing, video CDs step 4. will function differently.

Playing Video CDs with the PBC Function Using • Repeat function does not work when PBC is ON.

the interactive feature (Menu-Driven Play) 1 Insert a video CD. Search Play The “PBC” indicator will light up on the display when a video Holding down the following buttons, during playback, will fast CD of version 2.0 is inserted. forward/backwards the video CD so you can quickly find a partic- 2 Press the CD button. ular passage in the track you are playing. 6 • 4 or ¢ button on the Remote Control “PBC” appears on the display and playback starts from the During Search Play, the playing time quickly changes on the dis- first menu. play and on the TV. 3 To move through the next menu, press the NEXT or PREV button. 4 • When you use Search Play mode, no sound is heard.To select the item in the menu and play it, press the following buttons. On the Unit: 1. Press the VCD NUMBER + or – button to select the item (“SEL **”) you want to play. Basic Remote Control and Unit Button Functions for Menu-Driven Play: Remote Control Unit Function PREV / NEXT PREV / NEXT Move through menu. - VCD NUMBER +/- Select a specific menu item. Numeric Keys SELECT (CD 6) Enters the selected video CD number or item. & RETURN & RETURN Returns to the previous menu during playback., MX-K350V[US].book Page 18 Tuesday, June 11, 2002 9:32 AM Using the Video CD Player (Video CDs) 2 Menu screen123Press & RETURN11Moving22picture To next screen12312Press & RETURN Moving Moving Moving Moving Still Still Moving Moving picture picture picture picture picture picture picture picture To previous screen Press & RETURN A selection menu is displayed when you start playing a video CD with the PBC function. The selection menu shows a list of numbers Playing Video CDs without the for selection. Some video CDs may show moving pictures or a di- vided screen. PBC Function • When a list of numbers is displayed, selecting a number shows its contents. Basic playback procedures for video CDs are the same as for audio • When the selection menu is re-displayed after you have played CDs. (See page 11-15.) your selection, selecting a number again can replay its contents. • When you start playing a video CD without the PBC function, (Some video CDs may show the menu screen several times.) “VIDEO CD” appears on the display. • After playback, press & RETURN to go back to the previous screen. Some video CDs may return you to the menu screen shown before playback. Various Functions to Enhance

Your Enjoyment Playing Video CDs with PBC

You can use the following features.

Functions without Using the PBC Function (PBC OFF) Frame-by-Frame Playback

Frame-by-Frame Playback is possible only when moving pictures You can play the video CDs with the PBC function without using (of the video CDs ver 1.1 with or without the PBC function of the PBC function, as if they were without the PBC function. VCD 2.0) are played. 1 Insert a video CD 2.0. During playback, press the STILL button on the Remote The “PBC” indcator lights up on the display. control to pause the video CD. You can select the frame by the ¢ button on the Remote Control. 2 Press the PBC button on the unit to go out To resume Normal Play, press the STILL button on the Re- “PBC” indicator on the display. mote Control. Each time you press the button, the display alternates as fol- lows: PBC OFF (“PBC” goes out) Ô PBC ON (“PBC” lights up) • During frame-by-frame playback, no sound comes out. For Program Play, Random Play, Repeat Play: • The ¡ button on the Unit does not work for the Frame- The Program and Random Play cannot be made. Only RE- by-Frame playback function but works for selecting PEAT functions are possible. (See page 15.) menu. 3 Press the CD 6 button to play the video CD., MX-K350V[US].book Page 19 Tuesday, June 11, 2002 9:32 AM

Using the Video CD Player (Video CDs) Display the Time 1 Stop the Video CD.

You can view the playing or remain time on the TV screen. Video CD with the PBC function: Press the ON SCREEN button on the Remote Control. Turn off the PBC function with the PBC button on the Each time you press the button. The on-screen display mode is Unit.(See page 18.) changed as follows: Video CD without the PBC function: SINGLE ELAPSED 00:05 The display automatically changes Press the 7 key on the Unit or Remote Control. to current track display and time after 2-Seconds. For example: 2 Press the HIGHLIGHT button on the RemoteSINGLE REMAIN 45:55 Total track number Control. TOTAL REMAIN 45:55 The Highlight Play starts from track 01 and shows in sequence, the first five seconds of nine divided highlight scene on the TV Current track number Time screen. 123• Does not show the remaining time in the case of playing894VCD with PBC or playing MP3 discs. • No this function in menu selection status in the case of765playing VCD with PBC.

Viewing the Video Intro of Video CDs 3 Select the scene by numeric keys on the

Remote Control. You can check the contents of a video CD, watching the first five seconds of each track on the video CD. Playback starts from selected scene. To stop or cancel the Highlight Play, press the 7 button 1 Stop the Video CD. on the Unit or Remote Control. Video CD with the PBC function: Turn off the PBC function with the PBC button on the Unit. (See page 18.) Video CD without the PBC function: • When a highlight scene is selected, playback starts from Press the 7 button on the Unit or Remote Control. the beginning of the highlight scene, but not from the still image shown on the display (the part shown is the last 2 Press the VIDEO INTRO button on the Remote part of the highlight scene, not its beginning). Control. • During the Highlight Play, image shown on the display The Video Intro Play starts and the first five seconds of nine may be partially distorted, resulting from noises or incor- tracks are played in sequence. rect manufacturing of the CD.

Changing the Musical Key Level

123You can change the musical key level. This function is useful894when you sing alone with Karaoke. 7651Press the KEY CONTROL I or i button to up • If the video CD has more than nine tracks, the tracks whose or down the chromatic musical key level. track number is greater than nine will be displayed when you Shows the musical key level press the NEXT button on the Unit or Remote Control. 3 Select the track number by Numeric keys on the Remote Control. Continuous Play starts from the selected track. To stop or cancel the Video Intro Play, press the 7 button on the Unit or Remote Control. • The note mark moves and indicates the musical key level. • During the Video Intro Play, image shown on the display may be partially distorted, resulting from noises or incor- rect manufacturing of the CD. • The setting of musical key level will be reset to neutral po- sition when you change the disc, change to other sources

Viewing the Highlights of Video CDs or turn the power off.

You can view nine highlight scenes of the selected track on a video • Musical key level setting will be effective for one disc only. CD. These highlight scenes are created by dividing the track equal- ly into nine portions and the beginning (5 seconds each) of those nine scenes are shown on the display., MX-K350V[US].book Page 20 Tuesday, June 11, 2002 9:32 AM

Using the Cassette Deck (Listening to a Tape)

3-CD PLAY & EXCHANGE CD-R/RW PLAYBACK SOUND 7 STANDBY/ON COMPACT COMPONENT SYSTEM MX-K350V REPEAT MODE 1 BIT DUAL D/A

CONVERTER PROGRAM

SLEEP CLA E SSI

C RANDOM AUX

STANDBY STANDBY/ON CANCEL SET

IP SK

FM MODE FM /AM / DEMO PRESET CPREV. NEXT ISD TAPE 3 VIDEO INTRO ON SCREEN HIGHLIGHT 7 AUX FM CD TAPE / AM 3 PHONES CD PREV. NEXT TUNING SELECT VCD NUMBER REC START CD / STOP REC START DUBBING ACTIVE 2

D

BASS EX. C ¡ MIC MIC LEVEL CLOCK TAPE PBC RETURN KEY CONTROL 4 /TIMER A / B 1CD STILL RETURN MIN MAX ¢ 22 TAPE A/B CD1 CD2 CD3 CD

PROGRAM

REPEAT SELECT/RANDOM TAPE 0 EJECT EJECT EJECT 0 EJECT A/B TAPE TAPE 3 (Deck A) (Deck B) KEY CONTROL MPX A PLAY FULL - LOGIC CONTROL CD SYNCHRO RECORDINGREC / PLAYB TAPE A/B

SOUND

MODE KARAOKE ACTIVE FADE BASS EX. ECHO MUTING

VOLUME

3: Tape indicator

A B

Deck indicators * When the System is in use, the display shows other items as well. For simplicity, we show here only the items described in this section.

The Cassette Deck allows you to play, record, and dub audio tapes. 3 Close the cassette holder gently.

❏ Listening to type I tape is suitable for this Cassette Deck. When both Deck A and Deck B contain a tape, the last deck to

The use of tapes longer than 120 minutes is not rec- have a tape inserted is selected. The selected Deck is shown by the Deck indicator “A” or “B”.

ommended, since characteristic deterioration may For example, when the Deck A is selected, the Deck indicator occur and these tapes easily jam in the pinch-rollers “A” lights up. and the capstans. • To change the deck, press the TAPE A/B button. Each time you press the button, Deck A or Deck B is alternately

One Touch Play selected. By pressing the TAPE 3 button, the System will come on, and if Press the TAPE 3 button.

a tape is in the deck, it will start to play. If no tape is loaded, “NO 4 The Tape indicator (3) blinks on the display and the tape is

TAPE” appears on the display, the System will come on and wait

for you to insert a tape, or select another function. played back.

The Cassette Deck automatically stops when one side of the

tape has finished playing.

Playing a Tape To stop playing, press the 7 button. To remove the tape, stop the tape, and press the 0 EJECT part You can use either Deck A or Deck B at a time for playback. to open the Cassette Holder.

1 Press the 0 EJECT part for the deck you To Fast-Wind A Tape want to use. During playback or in Stop mode, press the ¡ (FF) button on the 2 When the cassette holder opens, put a cas- Unit to fast-wind the tape onto the right side of the cassette without playing. sette in, with the exposed part of the tape During playback or in Stop mode, press the 22 (REW) button on down, toward the base of the Unit. the Unit to fast-wind the tape onto the left side of the cassette with-

The tape will travel from the left to right. out playing. During fast-winding the tape, the Tape indicator (3) goes out.

• The Cassette Deck automatically stops when one side of the tape has finished playing. ❏ During fast-winding the tape, you can change the tape travelling direction by pressing the ¡ (FF) or 22 (REW) button. Tape travelling direction • If the cassette holder does not open, turn the System off, then back on and press the 0 EJECT part again.

VO LU M ROC K OP P

, MX-K350V[US].book Page 21 Tuesday, June 11, 2002 9:32 AM

Using the Cassette Deck (Recording)

3-CD PLAY & EXCHANGE CD-R/RW PLAYBACK STANDBY/ON SOUND 7 COMPACT COMPONENT SYSTEM MX-K350V REPEAT MODE SLEEP 1 BIT DUAL D/A

CONVERTER PROGRAM C

AUX LASSICE PROGRAM

RANDOM

FM MODE FM /AM STANDBY STANDBY/ON CANCEL SET

IP SK

SCRE / DEMO PRESET CPREV. NEXT IS VIDEO INTRO ON EN HIGHLIGHTD7TAPE 3 PREV. NEXT AUX FM CD TAPE / AM 3 PHONES CD 4 CD REC START TUNINGSELECT VCD NUMBERREC START CD/ STOP REC START DUBBING ACTIVE 2 STILL RETURN BASS EX. CD REC START/STOP MIC MIC LEVEL CLOCK TAPE¢ PBC RETURN KEY CONTROL /TIMER A / BCD1 CD2 CD3 CD 1

CD

MIN MAX TAPE A/B PROGRAM SELECT REPEAT /RANDOM DUBBING

TAPE TAPE

A/B EJECT EJECT TAPE A/B 0 EJECT 0 EJECT KEY CONTROL MPX TAPE (Deck A) (Deck B)3

SOUND

MODE KARAOKE A PLAY FULL - LOGIC CONTROL CD SYNCHRO RECORDINGREC / PLAYB ACTIVE FADE BASS EX. ECHO MUTING

VOLUME

REC indicator 3: Tape indicator A REC

B

Deck indicators * When the System is in use, the display shows other items as well. For simplicity, we show here only the items described in this section.

Recording onto a cassette from any of the sound sources is simple. Just place a tape in Deck B, have the source ready, make one or

two settings, and you’re ready to record. For each source, the pro- cedure is a little bit different so we explain each separately. But • At the start and end of cassette tapes, there is leader tape first, here are a few things to make your recordings better. which cannot be recorded onto. Thus, when recording

CDs, radio broadcasts, etc., wind on the leader tape first Things To Know Before You Start Recording to ensure getting the beginning of the recording.

❏ It may be unlawful to record or play back copyrighted material without the consent of the copyright owner. ❏ The recording level, which is the volume at which the new tape CAUTION: is being made, is automatically set correctly, so it is not affected • If a recording you make has excessive noise or by the VOLUME Control on the System. Also, it is not affected static, the Unit may have been too close to a TV by adjusting the sound effects. Thus, during recording, you can which was on during the recording. Either turn adjust the sound you are actually listening to without affecting the recording level. off the TV or increase the distance between the ❏ Two small tabs on the back of the cassette tape, one for side A TV and the Unit. and one for side B, can be removed to prevent accidental erasure or recording. Adhesive tape ❏ To record on a cassette with the tabs removed, you must cover the holes with adhesive tape first. ❏ Type I tape can be used for recording.

VO LU M ROC K OP P

, MX-K350V[US].book Page 22 Tuesday, June 11, 2002 9:32 AM Using the Cassette Deck (Recording)

Standard Recording 2 Insert a blank or erasable tape into the Deck

B and wind past the tape leader. This is the basic method for recording any source. The System also 3 Press the CD REC START button on the Unit. has special ways for recording CD to tape, and tape to tape, which “CD REC” appears on the display and the “REC” indicator save you time and effort, as well as give you some special effects. lights up. Then, the System begins CD Synchro Recording and However, when you need to add a selection to a tape you have the tracks on the CD are recorded on the tape.When recording of the tracks of all CDs is finished, “CD REC” made, or are combining selections from several sources on one and “FINISHED” shows on the display alternatively and the tape, use the method described below; just substitute the source CD Player and Cassette Deck stop. you want into this procedure, such as a tape in Deck A, a CD, or the Tuner. You can also record from an external equipment with (When finished)

CD

REC START this procedure.

To Record Any Sound Source to Tape

Follow these steps to record from any sound source onto a tape in • If the tab of the cassette tape on the Deck B is removed toprevent erasure or recording, “NO REC” will appear on the Deck B. display. 1 Insert a blank or erasable tape into the Deck • After the CD Player has played the entire CD or all the pro-grammed tracks, the tape automatically stops. B and wind past the tape leader. To stop at any time during the recording process, press the REC START/STOP button on the Unit or the 7 button. “CD REC FINISHED” scrolls on the display and the CD Player and Cassette Deck stop. Tape travelling direction • When making SLEEP timer settings while doing CD Syn- chro recording, set enough time to allow for the CD to fin- 2 Prepare the source, by, for example, tuning ish playing, otherwise the power will go off before in a radio station, loading CDs, or turning on recording is completed. connected equipment. • For CD recording, see “CD Synchro Recording” mentioned below. Tape to Tape Recording (DUB- • For dubbing, see “Tape to Tape Recording (DUBBING)” described below. BING) 3 Press the REC START/STOP button on the Recording from one tape to another is called dubbing. Unit. You can dub tapes simply, with just a single button. The “REC” indicator lights up and the System begins record- 1 Press the TAPE3 button, and then press the ing. The Tape indicator ( ) blinks on the display. 7 button.3 • If the tab of the cassette tape on the Deck B is removed to 2 Insert the source cassette you want to copy prevent erasure or recording, “NO REC” will appear on the display. from into Deck A for playback. To stop during recording, press the REC START/STOP but- 3 Insert a blank or erasable cassette you want ton on the Unit, or press the 7 button. to copy onto into Deck B for recording.

Recording an AM Station to Tape (Beat Cut) 4 Press the DUBBING button on the Unit.

Deck A and Deck B will start simultaneously and the “REC” When recording an AM broadcast, beats may be produced which indicator lights up. are not heard when listening to the broadcast. If this happens, press During dubbing, the Deck indicators “A” and “B” light up al- the PROGRAM button on the Unit to eliminate the beats. ternately. 1 Set to AM station and start recording. • If no tape is inserted into Deck A, “NO TAPE” will appear on the display. 2 Press the PROGRAM button on the Unit to • If no tape is inserted into Deck B, “NO TAPE” will appear eliminate the beats. on the display. Each time you press the button, the display changes as shown To stop dubbing, press the REC START/STOP button on the below: Unit or the 7 button. B-CUT 1= B-CUT 2 = (back to the beginning)

CD Synchro Recording • During dubbing, you can hear sound effects through the

speakers or headphones. However, the sound is dubbed Everything on the CD goes onto the tape in the order it is on the without sound effects. CD, or according to the order you have set in a program. 1 Prepare CDs. (See page 12.) Press the CD1-3 button (that you want to make recording), and then press the 7 button. • If you want to record specific tracks only, you need to pro- gram the tracks beforehand. (See page 13.), MX-K350V[US].book Page 23 Tuesday, June 11, 2002 9:32 AM

Using an External Equipment

STANDBY/ON 3-CD PLAY & EXCHANGE CD-R/RW PLAYBACK

SLEEP SOUND

COMPACT COMPONENT SYSTEM MX-K350V REPEAT MODE 1 BIT DUAL D/A AUX CONVERTER AUX PROGRAM

CLASSICE

FM MODE FM /AM

RANDOM

N SCREEVIDEO INTROONHIGHLIGHT STANDBY STANDBY/ON CANCEL SET

IP SK

/ DEMO PRESET PREV. NEXT IS

C D

PREV. NEXT

AUX

AUX FM CD TAPE / AM 3 PHONES CD STILL RETURN

TUNING

SELECT VCD NUMBER REC START CD / STOP REC START DUBBING ACTIVE 1 2CD CD2 CD3 CD DBASS EX. C MIC MIC LEVEL CLOCK TAPE PBC RETURN KEY CONTROL /TIMER A / B

CD

PROGRAM SELECT MIN MAX REPEAT /RANDOM

TAPE TAPE

A/B KEY CONTROL MPX EJECT EJECT

SOUND

MODE KARAOKE A PLAY FULL - LOGIC CONTROL CD SYNCHRO RECORDINGREC / PLAYB ACTIVE FADE BASS EX. ECHO MUTING

VOLUME Listening to the External Equipment You can listen to the external equipment such as MD recorder, cas-

sette deck, or other auxiliary. ❏ First, make sure that the external equipment is properly connect- ed to the System. (See page 6.) 1 Set the volume level to the minimum posi- tion. 2 Press the AUX button. “AUX” appears on the display. 3 Start playing the external equipment. 4 Adjust the volume level to the level you want listen to. 5 Apply sound effects, if you wish. • Press the ACTIVE BASS EX. to reinforce the bass sound. • Select the Sound Mode. (See page 8.)

To exit AUX mode, select other source (e.g. Tuner).

• For operation of the external equipment, refer to its In- structions.

VO LU M ROC K OP P

, MX-K350V[US].book Page 24 Tuesday, June 11, 2002 9:32 AM

Using the Timers

3-CD PLAY & EXCHANGE CD-R/RW PLAYBACK STANDBY/ON SOUND 4COMPACT COMPONENT SYSTEM MX-K350V REPEAT MODE 1 BIT DUAL D/A

CONVERTER

PROGRAM ¢ SLEEP CLASSIC SLEEP E

RANDOM AUX

STANDBY STANDBY/ON CANCEL SET

KIP

FM MODE FM /AM S/ DEMO PRESETPREV. NEXT DISCSET VIDEO INTRO ON SCREEN HIGHLIGHT AUX FM CD TAPE / AM D 3PHONES C PREV. NEXT TUNING REC START CD SELECT VCD NUMBER / STOP REC START DUBBING ACTIVE 2 BASS EX. CD MIC MIC LEVEL KEY CONTROL CLOCK TAPEPBC RETURN /TIMER A / B

CD

STILL RETURN MIN MAX CD1 CD2 CD3 CD

PROGRAM

REPEAT SELECT/RANDOM CLOCK/TIMER EJECT EJECT

TAPE

A/B TAPE KEY CONTROL MPX A PLAY FULL - LOGIC CONTROL CD SYNCHRO RECORDINGREC / PLAYB

SOUND

MODE KARAOKE ACTIVE FADE BASS EX. ECHO MUTING

VOLUME

SLEEP indicator DAILY Timer indicator

SLEEP DAILY REC

REC (Recording) Timer indicator Timer indicator * When the System is in use, the display shows other items as well. For simplicity, we show here only the items described in this section.

The timers lets you control recording and listening functions auto- Using the Unit

matically.

Three types of timers are available: 1 Press the CLOCK/TIMER button. DAILY Timer Use this timer to set wake up everyday to The hour digit of the time indication blinks on the display.

music from any source, instead of an alarm clock. • If the clock is already set and “0:00” is not blinking, press

REC (Recording) Timer the CLOCK/TIMER button repeatedly until clock setting Unattended recording of radio broadcasts. You can set the display appears on the display. In the clock setting display,

starting time and length of the recording. the hour digits of the current clock blink on the display.

SLEEP Timer Fall asleep and have your System turn off Each time you press the CLOCK/TIMER button, the display

automatically after a certain length of time. changes as follows:

DAILY = ON TIME = REC = ON TIME = Clock set- Setting the Clock ting display = (back to the beginning)

2 Press the 4 or ¢ button to set the hour.

When you plug the AC power cord into the wall outlet, the time in- Pressing the ¢ button moves the time forwards and pressing

dication “0:00” blinks on the display. the 4 button moves it backwards. Holding down the button

You can set the clock whether the System is on or off. moves the hour rapidly.

3 Press the SET button. • The clock must be correctly set for the timers to work. The minute digits of the time indication blink on the display. • Each setting step must be completed within approx. two 4 Press the 4 or ¢ button to set the minutes. Otherwise, the setting is cleared and must be re- peated from the beginning. minute. • The clock may gain or lose one to two minutes per month. 5 Press the SET button. “CLOCK OK” appears on the display. Then, the selected time is set.

CAUTION:

• If there is a power failure, the clock loses its set- ting immediately. “0:00” blinks on the display and the clock must be reset.

VOLUM ROCK P PO

, MX-K350V[US].book Page 25 Tuesday, June 11, 2002 9:32 AM

Using the Timers

2. Press the 4 or ¢ button to set the minute, then press the

Setting the Daily Timer SET button.

Once you have set the Daily Timer, the timer will be activated at the same time every day. The Timer indicator ( ) on the display shows that the Daily Tim- DAILY er you have set is in effect. You can set the Daily Timer whether the System is turned on or “OFF TIME” appears for 2 seconds, and the System enters off. OFF-time setting mode. The current OFF time appears on the display, and the hour digits blink. • Perform each setting within 30 seconds. Otherwise, set- ting will be cleared and the procedure must be repeated After 2 seconds from the beginning. DAILY • If you have made a mistake while setting the timer, press the CANCEL button on the Unit. However, this does not al- ways cancel the current setting. If the CANCEL button does not work, press the CLOCK/TIMER button on the DAILY Unit repeatedly until the display returns to the original dis- play, and start from the first step. 4 Setting the OFF time (Example: 13:15). 1. Press the 4 or ¢ button to set the hour you want the

Using the Unit System to come on, then press the SET button.

1 Press the STANDBY/ON button to turn on The minute digits of the OFF time blink on the display.% the System. 2 Press the CLOCK/TIMER button until “ON TIME” immediately after “DAILY” appears on DAILY the display. At this time, “DAILY” indicator blinks and the Timer indica- 2. Press the 4 or ¢ button to set the minute, then press the tor ( ) lights up on the display. SET button. Each time you press the button, the display changes as follows: DAILY = ON TIME* = REC = ON TIME = Clock setting display = (back to the beginning) * : This item should be selected for the Daily Timer setting.

DAILY

After 2 seconds, the System enters ON-time setting mode. The cur- rent ON time appears on the display and the hour digits blink. The System enter Music Source Selecting mode and “TUN- ER FM” appears on the display. After 2 seconds DAILY DAILY 5 Selecting the music source. DAILY Press the 4 or ¢ button to select the music source you want to listen to, then press the SET button. Each time you press the 4 or ¢ button, the display chang- 3 Setting the ON time (Example: 10:15). es as shown below: 1. Press the 4 or ¢ button to set the hour you want the TUNER FM = TUNER AM = 1CD – 001 = TAPE = AUX System to come on, then press the SET button. = (back to the beginning) The minute digits of the ON time blink on the display. According to the music source you have selected, the next op- Pressing the ¢ button moves the time forwards and press- eration differs. ing the 4 button moves it backwards. TUNER FM: Tunes in to the specified preset FM station. Holding down the button moves the time rapidly. TUNER AM: Tunes in to the specified preset AM station. 1CD – 001: Plays the specified track on the specified CD. TAPE: Plays a tape in the Deck A or B. AUX: Plays an external source.

DAILY

, MX-K350V[US].book Page 26 Tuesday, June 11, 2002 9:32 AM Using the Timers Preparation for each music source: Turning the Daily Timer On and Off Perform the following operation according to the music source you have selected. Then, the System enters Volume Setting Once you have set the Daily Timer, it is stored in memory. So, the mode. Daily Timer will be activated at the same time every day until it is When selecting TUNER FM or TUNER AM: canceled. Press the 4 or ¢ button to select the preset station To cancel the Daily Timer temporarily: number, then press the SET button. When selecting 1CD – 001: 1 Press the CLOCK/TIMER button on the Unit 1. Press the 4 or ¢ button to select the disc number, then repeatedly until the “DAILY” appears on the press the SET button. display. Each time you press the button the disc number changes as 2 Press the CANCEL button on the Unit.follows: The “DAILY” indicator goes out and “OFF” appears on the 1CD – 001= 2CD – 001 = 3CD – 001 = (back to the be- display. ginning) The Timer indicator ( ) and “DAILY” indicator go out and 2. Press the 4 or ¢ button to select the track number, then the Daily Timer is canceled temporarily. press the SET button. When selecting TAPE: To activate the cancelled Daily Timer: Before turning off the system, select either the Deck A or Deck B. (See page 20) 1 Press the CLOCK/TIMER button on the Unit When selecting AUX: repeatedly until the “DAILY” appears on the Prepare the external equipment so that it will turn on at the ON time set by the System. display. To allow this, the equipment should have the timer function. The “DAILY” indicator blinks and the Timer indicator ( ) lights up on the display. 6 Setting the volume level. Press the 4 or ¢ button to select the volume level. 2 Press the SET button on the Unit. VOL – – – : The current volume level will be used. The “DAILY” indicator remains lit. Each setting already made VOL-5, -10, or -15: When the timer is turned on, the Volume appears on the display in the order of ON time, OFF time, mu- will be automatically set to the selected level. sic source and volume, and then the display returns to the orig- inal display. DAILY CAUTION: • If the System is unplugged, or a power failure oc- 7 Press the SET button. curs, the timer setting loses its setting immedi- The timer setting is completed, and the “DAILY” indicator ately. You will need to reset the clock first, then stops blinking and remains lit. Each setting you have made ap- the timer. pears on the display in the order of ON time, OFF time, music source and volume. Then, the display returns to the display be- fore you set the Timer.

Setting the REC (Recording)

8 Press the % STANDBY/ON button to turn off the System. Timer The Timer indicator ( ) and “DAILY” indicator are lit on the display, showing that the Daily Timer is set to on. With the Recording Timer, you can make a tape of a radio broad- cast automatically whether or not you are home. To change the timer setting, repeat the setting procedure from the beginning. When the timer ON-time comes: • You can set the REC Timer whether the System is on or The following operation will be automatically repeated every day. off. • When the timer ON-time comes, and the System automatically • Perform each setting within 30 seconds. Otherwise, set- turns on. The music source you have set is played. The Timer ting will be cleared and the procedure must be repeated indicator ( ) blinks during timer operation. from the beginning. • When the timer OFF-time comes, “OFF” blinks on the display • If you have made a mistake while setting the timer, press just before the OFF-time and the System automatically turns the CANCEL button on the Unit. However, this does not al- off. Then, the Timer indicator ( ) remains lit on the display. ways cancel the current setting. If the CANCEL button does not work, press the CLOCK/TIMER button on the Unit repeatedly until the display returns to the original dis- play, and start from the first step. • If the System is already on when the timer ON-time comes, the Daily Timer does not work., Body.fm Page 27 Wednesday, June 12, 2002 6:16 PM

Using the Timers

Using the Unit When the timer ON-time comes: You can set the time in the same way as for setting the Daily Tim- • When the timer ON-time comes, the System automatically er. turns on. The station you have set is played. The Timer indica- 1 tor ( ) blinks during timer operation.Insert a blank or erasable tape into the Deck To stop timer recording, press the 7 button. B and wind past the tape leader. • When the timer OFF-time comes, “OFF” blinks on the display 2 just before the OFF-time and the System automatically turnsPress the CLOCK/TIMER button until “ON off. TIME” immediately after “REC” appears on the display. Then, the “REC” indicator blinks on the display. • The REC Timer works even if the System is turned on. Each time you press the button, the display changes as follows: DAILY = ON TIME REC ON TIME* Clock setting • Set the REC timer setting time considering one or more= = = display (back to the beginning) minutes allowances.= * : This item should be selected for the REC Timer setting. After 2 seconds, the System enters ON-time setting mode. The cur- Turning the REC (Recording) Timer On and Off rent ON time appears on the display and the hour digits blink. Once you have set the REC Timer to record a source, the timer set- ting is stored in memory. So, recording will be made at the set time everyday unless you cancel the REC Timer. To cancel the REC Timer temporarily: After 2 seconds REC 1 Press the CLOCK/TIMER button on the Unit repeatedly until “REC” appears on the dis- play. REC 2 Press the CANCEL button on the Unit. 3 “OFF” appears and the “REC” indicator goes out.Setting the ON time you want the System to turn on. To activate the cancelled REC Timer: 1. Press the 4 or ¢ button to set the hour, then press the 1 Press the CLOCK/TIMER button on the UnitSET button. 2. Press the 4 or ¢ button to set the minute, then press the repeatedly until “REC” appears on the dis- SET button. play. “OFF TIME” appears for 2 seconds, and the System enters The “REC” indicator also blinks on the display. OFF-time setting mode. The current OFF time appears on the display, and the hour digits blink. 2 Press the SET button on the Unit. The “REC” indicator remains lit. Each setting already made 4 Setting the OFF time you want the System to appears on the display in the order of ON time, OFF time, and turn off. the preset number, and then the display returns to the originaldisplay. 1. Press the 4 or ¢ button to set the hour, then press the SET button. 2. Press the 4 or ¢ button to set the minute, then press the CAUTION: SET button. • If the System is unplugged, or a power failure oc- The System enter Preset Station Entering mode. curs, the timer setting loses its setting immedi- ately. You will need to reset the clock first, then 5 Select the preset station for recording. the timer. 1. Press the 4 or ¢ button to set the band (TUNER FM or • Once the REC Timer has been set, recording will TUNER AM), then press the SET button. be repeatedly made at the set time everyday. 2. Press the 4 or ¢ button to set the preset number, then To use the REC Timer once, cancel the REC Tim- press the SET button. er after you have finished recording with the The REC indicator stops blinking and remains lit. REC Timer. • Each setting you have made appears on the display in the order of ON time, OFF time, radio band and the preset number. 6 Press the % STANDBY/ON button to turn off the System, if necessary. To change the timer setting, repeat the setting procedure from the beginning., MX-K350V[US].book Page 28 Tuesday, June 11, 2002 9:32 AM Using the Timers

Setting the SLEEP Timer Timer Priority

Use the Sleep Timer to turn the System off after a certain number Since each timer can be set independently, you may wonder what of minutes when it is playing. By setting the Sleep Timer, you can happens if the settings overlap. Here are the priorities for each timer: fall asleep to music and know that your System will turn off by it- ❏ The REC Timer always has priority. This means that: self rather than play all night. • If other timer is set to come on during a time when the REC • You can only set the Sleep Timer when the System is on. Timer is operating, the other timer just won’t come on at all, Using the Remote Control so you will always get the entire program on a tape. • If the REC Timer is set to come on while other timer is oper- 1 During playback a source, press the SLEEP ating, the other timer will turn off just before the REC Timer button. is set to turn on, and the REC Timer will then take over. The “SLEEP” indicator starts blinking on the display. ❏ If the SLEEP Timer is set while DAILY Timer is operating, the DAILY Timer settings are cancelled. However, if DAILY Tim- 2 Set the length of time you want the source to er is set to come on while the SLEEP Timer is operating, the play before shutting off. SLEEP Timer setting will be cancelled and the System will use Each time you press the SLEEP button, the time length chang- the settings from the DAILY Timer. es as follows: Example 1 10 = 20 = 30 = 60 = 90 = 120 = Cancelled = (back to Setting the beginning) ON OFF REC Timer

OFF

SLEEP SLEEP Timer 3 Wait for 5 seconds. 22:00 22:30 23:00 The “SLEEP” indicator stops blinking and remains lit, and the display returns to the original one before setting the Sleep Timer. The System is now set to turn off after the number of minutes Operation you have set. ON OFF REC Timer To Confirm the Sleep Time: When the SLEEP button on the Remote Control is pressed, the re- SLEEP Timer maining sleep time is displayed. Wait until the display returns to the original display. To Cancel the SLEEP Timer Setting: 22:00 22:30 Press the SLEEP button on the Remote Control until the “SLEEP” The REC Timer has priorty. indicator goes out on the display. • Turning off the System also cancels the SLEEP Timer. Example 2 Setting ON OFF REC Timer ON OFF DAILY Timer 21:30 22:00 22:30 23:00 Operation ON OFF REC Timer DAILY Timer 21:30 22:30 The REC Timer has priorty., MX-K350V[US].book Page 29 Tuesday, June 11, 2002 9:32 AM

Using the Microphone

3-CD PLAY & EXCHANGE CD-R/RW PLAYBACK STANDBY/ON

SOUND

COMPACT COMPONENT SYSTEM MX-K350V REPEAT MODE SLEEP 1 BIT DUAL D/ACONVERTER

PROGRAM C

AUX LE ASSIC

RANDOM

FM MODE FM /AM STANDBY STANDBY/ON CANCEL SET

SK

IP VOLUME / DEMO PRESETPREV. NEXT DIS

C

VIDEO INTRO ON SCREEN HIGHLIGHT PREV. NEXT AUX FM CD TAPE / AM D 3PHONES C

TUNING

REC START CD SELECT VCD NUMBER / STOP REC START DUBBING ACTIVE D 2BASS EX. C STILL RETURN MIC MIC LEVEL PBC RETURN KEY CONTROL CLOCK TAPE /TIMER A / B123CD CD CD CD MIC jack CD MIN MAX

PROGRAM

REPEAT SELECT/RANDOM TAPE MIC LEVEL A/B TAPE EJECT EJECT KEY CONTROL MPX SOUND A PLAY FULL - LOGIC CONTROL CD SYNCHRO RECORDINGREC / PLAYB MODE KARAOKE

KARAOKE

ACTIVE FADE BASS EX. ECHO MUTING VOLUME +, –

ECHO VOLUME

Volume level, etc. kHz

ST

Karaoke indicator Echo indicator * When the System is in use, the display shows other items as well. For simplicity, we show here only the items described in this section.

By attaching a microphone (not supplied) to the MIC jack, you can

use the System for Karaoke or microphone mixing. You can also 5 Adjust the volume, as you sing into the add an echo to the microphone’s sound. microphone.

To adjust the volume, use the MIC LEVEL control and VOL- CAUTION: UME control on the Unit or the VOLUME +,- button on theRemote Control.

• Always set the MIC LEVEL control on the Unit to To exit Karaoke mode, press the KARAOKE button on the Re-

MIN when connection or disconnecting the mi- mote Control again. The Karaoke indicator ( ) will go off.

crophone. • Avoid using the following source as the playing source for • When you will not be the microphone, keep the MIC LEV- Vocal Masking, since you cannot get the satisfactory re-

EL control set to MIN, and disconnect the microphone. sults.

• Radio programs — a radio signal is not as reliable as the signals coming from a tape or CD. • Monaural sources.

Singing Along with Karaoke • Poorly dubbed tapes.

• Sources recorded with dusts, strong echo, a chorus, or

The Vocal Masking function lets you use regular tapes, CDs, or only a few instruments.

records as sources for Karaoke. When you select Karaoke mode, the lead vocal volume of the source is reduced, and you can replay it by singing into the microphones as the music plays. 1 Turn the MIC LEVEL control on the Unit to

MIN.

2 Connect a microphone by plugging it into the

MIC jack.

3 Press the KARAOKE button on the Remote

Control. The Karaoke indicator ( ) comes on.

4 Starts a source CD, tape, or other equipment.

VOLUM ROCK OPP

, MX-K350V[US].book Page 30 Tuesday, June 11, 2002 9:32 AM Using the Microphone

To Apply Digital Echo

Press the ECHO button on the Remote Control. Playing the Microphone Sound The Echo indicator ( ) comes on. through the Speakers To cancel the ECHO, press the ECHO button again. The Echo indicator goes off. You can directly output the microphone sound from the speakers. No echo is applied. 1 Turn the MIC LEVEL control on the Unit toAn echo is applied. MIN. 2 Connect a microphone by plugging it into the MIC jack. • To prevent howling and squealing (feedback) when using 3 Adjust the volume, as you sing into the the microphone, adjust the volume properly. Also, try to microphone. avoid to pointing the microphone towards the speaker. To adjust the volume, use the MIC LEVEL control and VOL- UME control on the Unit or the VOLUME +,- button on the Remote control.

To Record Your Singing • When you want to apply echo to the microphone, press

ECHO button on the Remote Control. The Echo indicator 1 Follow the steps in “Singing Along with ( ) will come on. Karaoke” above.

Recording from the Microphone

2 Prepare a tape and source, then press the REC START/STOP button on the Unit. 1 Follow the steps in “Singing Along with For details, see “Standard Recording” on page 22. Karaoke” above. 2 Prepare a tape and source, then press the

Microphone Mixing REC START/STOP button on the Unit.

For details, see “Standard Recording” on page 22. When using special Karaoke sources for Karaoke, use the follow- ing procedure. 1 Turn the MIC LEVEL control on the Unit to MIN. 2 Connect a microphone by plugging it into the MIC jack. 3 Start a source CD, tape, or other equipment. 4 Adjust the volume, as you sing into the microphone. To adjust the volume, use the MIC LEVEL control and VOL- UME control on the Unit or the VOLUME +,- button on the Remote Control. • When you want to apply echo to the microphone, press ECHO button on the Remote Control. The Echo indicator ( ) will come on.

To Record Microphone Mixing

1 Follow the steps in “Singing Along with Karaoke” above. 2 Prepare a tape and source, then press the REC START/STOP button on the Unit. For details, see “Standard Recording” on page 22., MX-K350V[US].book Page 31 Tuesday, June 11, 2002 9:32 AM

Care And Maintenance

Handle your CDs and tapes carefully, and they will last a long Moisture Condensation time.

Compact Discs Moisture may condense on the lens inside

the System in the following cases: • After turning on heating in the room. • Only CDs bearing these marks can be • In a damp room. used with this System. However, contin- • If the System is brought directly from a ued use of irregular shape CDs (heart- cold to a warm place. shape, octagonal, etc.) can damage the Should this occur, the System may mal- Recordable System. function. In this case, leave the System turned on for a few hours until the moisture ReWritable evaporates, unplug the AC power cord, and then plug it in again.

Cassette Tapes

• If the tape is loose in its cassette, take up the slack by inserting a pencil in one of the reels and rotating. • If the tape is loose, it may get stretched, cut, or caught in the cassette. • Remove the CD from its case by holding • Do not touch the tape surface. it at the edges while pressing the case’s center hole lightly. • Do not touch the shiny surface of the CD, or bend the CD. • Put the CD back in its case after use to • Do not store the tape: prevent warping. - In dusty places • Be careful not to scratch the surface of - In direct sunlight or heat the CD when placing it back in the case. - In moist areas • Avoid exposure to direct sunlight, tem- - On a TV or speaker perature extremes, and moisture. - Near a magnet • A dirty CD may not play correctly. If a Cassette Deck CD does become dirty, wipe it with a soft cloth in a straight line from center to • If the heads, capstans, and pinch-rollers of the Cassette Deck edge. become dirty, the following will occur: - Loss of sound quality - Discontinuous sound - Fading - Incomplete erasure

CAUTION: - Difficulty recording

• Clean the heads, capstans, and pinch-rollers using a cotton • Do not use any solvent (for example, conven- swab moistened with alcohol. tional record cleaner, spray thinner, benzine, etc.) to clean a CD. Pinch-rollerCapstan

General Notes

In general, you will have the best performance by keeping your CDs and the mechanism clean. • Store CDs in their cases, and keep them in cabinets or on shelves. • Keep the System’s Top Cover closed when not in use. Heads • If the heads become magnetized, the Unit will produce noise or lose high frequencies. • To demagnetize the heads, turn off the Unit, and use a head demagnetizer (available at electronics and record shops)., MX-K350V[US].book Page 32 Tuesday, June 11, 2002 9:32 AM

Troubleshooting

• If you are having a problem with your System, check this list for a possible solution before calling for service. • If you cannot solve the problem from the hints given here, or the System has been physically damaged, call a qualified person, such as your dealer, for service. Symptom Possible Cause Action No sound is heard. • Connections are incorrect, or loose. • Check all connections and make cor- rections. (See pages 4 to 6.) • Headphones are connected. • Disconnect the headphones. Poor radio reception • The antenna is disconnected. • Reconnect the antenna securely. • The AM Loop Antenna is too close • Change the position and direction of to the System. the AM Loop Antenna. • The FM Wire Antenna is not prop- • Extend FM Wire Antenna to the best erly extended and positioned. reception position. The disc tray does not open. • The AC power cord is not plugged in. • Plug the AC power cord. • Tray is locked. • Unlock the tray. (See page 15.) The CD skips. The CD is dirty or scratched. Clean or replace the CD. (See page 31.) The CD does not play. The CD is upside down. Put the CD in with the label side up. The cassette holder cannot be opened. During tape playing, the power cord Plug in the power cord, and turn on the was unplugged. System. Unable to record. Cassette record protect tabs are re- Cover holes on back edge of cassette moved. with tape. Unable to operate the Remote Control. • The path between the Remote Control • Remove the obstruction. and the sensor on the Unit is blocked. • The batteries have lost their charge. • Replace the batteries. The image on the TV screen is distorted. VIDEO OUT select is not matching. Select the correct TV system. (See page 16.) The picture of the video CD is distorted. When you pause or skip the track, the pictures will be distorted. This is not a malfunction. Operations are disabled. The built-in microprocessor has mal- Unplug the System then plug it back in. functioned due to external electrical in- terference.

Specifications

Amplifier Speaker Specifications (each unit) Output Power 60 W per channel, min. RMS, driven into Type 3-way bass-reflex type6Ωat 1 kHz, with no more than 10% to- Speaker Unit Woofer: 13.5 cm cone ✕ 1 tal harmonic distortion (IEC 268-3) (5-1/4") Input Sensitivity/Impedance (1 kHz) Mid: 5 cm cone ✕ 1 AUX IN 300 mV/50 kΩ (2") Speaker terminals 6 - 16 Ω Tweeter: 2 cm dome ✕ 1 Phones 32 Ω - 1 kΩ, (3/4") 15 mW/ch output into 32 Ω Power Handling Capacity 60 W MIC 2.5mV/5 kΩ Impedance6ΩVideo Out (composite) 1.0 Vp - p (75 Ω) Frequency Range 45 - 22 000 Hz Sound pressure level 88 dB/wm Cassette Deck Section Dimensions 225 mm ✕ 305 mm ✕ 245 mm (W/H/D) Frequency Response Type I (NORMAL) 63 - 12 500 Hz (8-7/8" ✕ 12-3/16" ✕ 9-11/16") Wow And Flutter 0.15% (WRMS) Mass Approx. 3 kg (6.5 lbs) CD Player Accessories CD Capacity 3 CDs AM Loop Antenna (1) Dynamic Range 85 dB Remote Control (1) Signal-To-Noise Ratio 90 dB Batteries R6P (SUM-3)/AA (15F) (2) Wow And Flutter Unmeasurable FM Wire Antenna (1)Video Cord (1) Tuner AC Plug Adaptor (1) FM Tuner Tuning Range 87.50 - 108.00 MHz (at AM 9 kHz channel space) Power Specifications 87.5 - 108.0 MHz (at AM 10 kHz channel space) Power Requirements AC 110/127/220/230 - 240 V , adjust- AM Tuner able with the voltage selector, 50/60 Hz Tuning Range 531 - 1 629 kHz (at 9 kHz channel space) Power Consumption 110 W (power on mode) 530 - 1 710 kHz (at 10 kHz channel space) 10 W (in Standby mode) Unit Design and specifications are subject to change without notice. Dimensions 270 mm ✕ 305 mm ✕ 430 mm (W/H/D) (10-2/5" ✕ 12" ✕ 16-5/6") Mass Approx. 7.5 kg (16.5 lbs), Back cover.fm Page 36 Monday, July 22, 2002 2:32 PM

Mains (AC) Line Instruction (not applicable for Europe, U.S.A., Canada, Australia, and U.K.)

IMPORTANT for mains (AC) line BEFORE PLUGGING IN, do check that your mains (AC) line voltage corresponds with the position of the voltage selector switch provided on the outside of this equipment and, if different, reset the voltage selector switch, to prevent from a damage or risk of fire/electric shock. EN, CH VICTOR COMPANY OF JAPAN, LIMITED 0802NNMCREBET]
15

Similar documents

MX-GT700 SERVICE MANUAL COMPACT COMPONENT SYSTEM MX-GT700 Area suffix UW - Brazil,Mexico,Peru UJ - U.S.Military
MX-GT700 SERVICE MANUAL COMPACT COMPONENT SYSTEM MX-GT700 Area suffix UW - Brazil,Mexico,Peru UJ - U.S.Military STANDBY DISC CHANGE STANDBY/ON 3 CD CD-R/RW P LAYBACK STANDBY/ ON123SUBW OOFER SLEEP LEVEL MX -GT700 SOUND456MODE AUX SOUNDM ODE789FM MODE 10 +10 CLOCK/TIMER KARAOKE ECHO DISPLAY FM/AM TAP
PARTS LIST [ MX-GT700 ] - Contents -
PARTS LIST [ MX-GT700 ] * All printed circuit boards and its assemblies are not available as service parts. Area suffix UW - Brazil,Mexico,Peru UJ - U.S.Military - Contents - Exploded view of general assembly and parts list (Block No.M1) 3- 3 CD changer mechanism assembly and parts list (Block No.MA
PARTS LIST [ RC-BX30 ] * All printed circuit boards and its assemblies are not available as service parts. Area suffix UJ - U.S.Military
PARTS LIST [ RC-BX30 ] * All printed circuit boards and its assemblies are not available as service parts. Area suffix UJ - U.S.Military - Contents - Exploded view of general assembly and parts list (Block No.M1) 3- 2 Electrical parts list (Block No.01~04) 3- 5 Packing materials and accessories part
SERVICE MANUAL CD PORTABLE SYSTEM RC-BX30
RC-BX30 SERVICE MANUAL CD PORTABLE SYSTEM RC-BX30 Area suffix UJ - U.S.Military Contents Safety precautions 1-2 Flow of functional operation Preventing static electricity 1-3 until TOC read 1-18 Important for laser products 1-4 Maintenance of laser pickup 1-19 Disassembly method 1-5 Replacement of l
SCHEMATIC DIAGRAMS COMPACT COMPONENT SYSTEM MX-K350V
MX-K350V SCHEMATIC DIAGRAMS COMPACT COMPONENT SYSTEM MX-K350V CD-ROM No.SML200212 Area suffix US - Singapore UX - Saudi Arabia 3-CD PLAY & EXCHANGE CD-R/RW PLAYBACK SOUND COMPACT COMPONENT SYSTEM MX-K350V REPEAT MODE STANDBY/ON 1 BIT DUAL D/A CONVERTER PROGRAM SLEEPCELASSIC AUX RANDOM STANDBY STANDB
COMPACT COMPONENT SYSTEM CA-MXGT700
COMPACT COMPONENT SYSTEM CA-MXGT700 CA-MXGT700 STANDBY DISC CHANGE STANDBY/ON 3 CD CD-R/RW PLAYBACK MX-GT700 SOUNDMODE CLOCK /TIMER DISPLAY STANDBY/ON EXTENDED SUPER BASS123SUBWOOFER SLEEP LEVEL456AUX SOUNDMODE FMAUX CD TAPE /AM MIC789LEVEL FM MODE 10 +10 MIN MAX REPEAT PROGRAM RANDOM TAPE A TAPE BP
SCHEMATIC DIAGRAMS COMPACT COMPONENT SYSTEM MX-GT700
MX-GT700 SCHEMATIC DIAGRAMS COMPACT COMPONENT SYSTEM MX-GT700 Area suffix CD-ROM No.SML200212 UW - Brazil,Mexico,Peru UJ - U.S.Military STANDBY DISC CHANGE STANDBY/ON 3 CD CD-R/RW P LAYBACK STANDBY/ ON123SUBW OOFER SLEEP LEVEL MX -GT700 SOUND456MODE AUX SOUNDM ODE789FM MODE 10 +10 CLOCK/TIMER KARAOK
SCHEMATIC DIAGRAMS CD PORTABLE SYSTEM RC-BX30
RC-BX30 SCHEMATIC DIAGRAMS CD PORTABLE SYSTEM RC-BX30 CD-ROM No.SML200212 Area suffix UJ - U.S.Military Contents Block diagram 2-1 Standard schematic diagrams 2-2 Printed circuit boards 2-8 11 No.21171SCH COPYRIGHT 2002 VICTOR COMPANY OF JAPAN, LTD. Dec. 2002 In regard with component parts appearing
SERVICE MANUAL UX-P70
UX-P70 SERVICE MANUAL MICRO COMPONENT SYSTEM UX-P70 Area suffix UP - Korea This model is UX-P70_UP that is added to the preceding model,theUX-P7_US. Therefore, this service manual is consisting of diffrence parts list with UX-P7_A.US,UF,UP,UW,UY. Please refer to the service manual of UX-P7_A.US,UF,U
PARTS LIST [ TH-A30 ] - Contents -
PARTS LIST [ TH-A30 ] * All printed circuit boards and its assemblies are not available as service parts. Area suffix US - Singapore UB - Hong Kong UW - Brazil,Mexico,Peru UG - Turkey,South Africa,Egypt A - Australia - Contents - Exploded view of general assembly and parts list (Block No.M1) 3- 2 DV
DVD DIGITAL CINEMA SYSTEM TH-A30 Consists of XV-THA30, SP-XA30, SP-XSA30 and SP-WA30
DVD DIGITAL CINEMA SYSTEM TH-A30 Consists of XV-THA30, SP-XA30, SP-XSA30 and SP-WA30 STANDBY/ON AUDIO TV VCR TV/VIDEO PROGRESSIVE DISPLAY STEP TV CHANNEL AUDIO/ FM MODE SUBTITLE TV VOLUME VCR DVD FM/AM AUX CONTROL TUNER PRESET DOWN UP REW FF VCR CHANNEL TUNING B.SEARCH F.SEARCH ENTER VOLUME TOP MENU
SERVICE MANUAL MICRO COMPONENT SYSTEM UX-M33
UX-M33 SERVICE MANUAL MICRO COMPONENT SYSTEM UX-M33 Area suffix E - Continental Europe EN - Northern EuropeMICROCOMPONENTSYSTEMUX- M33STANDBY OPEN /ON /CLOSE DISPLAY REMAIN MODE /RDS MODE STANDBY/ON TIMER ON/OFF INTRO/RDS SEARCH SET TUNER CD/RANDOM /BAND TAPE RANDOM BAND CD TUNER TAPE REC PROGRAM PR
SERVICE MANUAL UX-P50
UX-P50 SERVICE MANUAL MICRO COMPONENET SYSTEM UX-P50 Area suffix UP - Korea This model is UX-P50_UP that is added to the preceding model,theUX-P5_US. Therefore ,this service manual is consisting of diffrence parts list with UX-P5_A.UP,US,UY,UW,UJ. Please refer to the service manual of UX-P5_A.UP,US,
PARTS LIST [ UX-M33 ] - Contents -
PARTS LIST [ UX-M33 ] * All printed circuit boards and its assemblies are not available as service parts. Area suffix E - Continental Europe EN - Northern Europe - Contents - Exploded view of general assembly and parts list (Block No.M1) 3- 3 Electrical parts list (Block No.01~04) 3- 5 Packing mater
SCHEMATIC DIAGRAMS MICRO COMPONENT SYSTEM UX-M33
UX-M33 SCHEMATIC DIAGRAMS MICRO COMPONENT SYSTEM UX-M33 CD-ROM No.SML200212 Area suffix E - Continental Europe EN - Northern EuropeMICROCOMPONENTSYSTEMUX- M33STANDBY OPEN /ON /CLOSE DISPLAY REMAIN MODE /RDS MODE STANDBY/ON TIMER ON/OFF INTRO/RDS SEARCH SET TUNER CD/RANDOM /BAND TAPE RANDOM BAND CD T
SERVICE MANUAL MICRO COMPONENT MD SYSTEM UX-Z7MD TABLE OF CONTENTS No.22003
SERVICE MANUAL MICRO COMPONENT MD SYSTEM UX-Z7MD TABLE OF CONTENTS Important Safety Precautions .2 Disassembly Method .5 Mechanism .19 Adjustment method .37 Description of major ICs .45 No.22003 COPYRIGHT © 2002 VICTOR COMPANY OF JAPAN, LTD. 2002/12 SECTION 1 Important Safety Precautions 1.1 Safety
PARTS LIST [ UX-Z7MD ] - Contents -
PARTS LIST [ UX-Z7MD ] * All printed circuit boards and its assemblies are not available as service parts. Area suffix UF - China UP - Korea - Contents - Exploded view of general assembly and parts list (Block No.M1) 3- 3 Speaker assembly and parts list (Block No.M2) 3- 6 CD mechanism assembly and p
DVD DIGITAL CINEMA SYSTEM TH-A30 Consists of XV-THA30, SP-XA30, SP-XSA30 and SP-WA30
DVD DIGITAL CINEMA SYSTEM TH-A30 Consists of XV-THA30, SP-XA30, SP-XSA30 and SP-WA30 STANDBY/ON AUDIO TV VCR TV/VIDEO PROGRESSIVE DISPLAY STEP TV CHANNEL AUDIO/ FM MODE SUBTITLE TV VOLUME VCR DVD FM/AM AUX CONTROL TUNER PRESET DOWN UP REW FF VCR CHANNEL TUNING B.SEARCH F.SEARCH ENTER VOLUME TOP MENU
SERVICE MANUAL
TH-V70 SERVICE MANUAL DVD DIGITAL CINEMA SYSTEM TH-V70 Area Suffix UT - Taiwan This model is TH-V70_UT that is added to the preceding model,theTH-V70_US. Therefore ,this service manual is consisting of diffrence parts list with TH-V70_A.US.UB.UX. Please refer to the service manual of TH-V70_A.US.UB.
UX-Z7MD SCHEMATIC DIAGRAMS MICRO COMPONENET MD SYSTEM UX-Z7MD
UX-Z7MD SCHEMATIC DIAGRAMS MICRO COMPONENET MD SYSTEM UX-Z7MD CD-ROM No.SML200212 Area Suffix UP - Korea UF -China Contents Block diagram - 2-1 Standard schematic diagrams - 2-2 Printed circuit boards - 2-9~12 No.22003SCH COPYRIGHT 2002 VICTOR COMPANY OF JAPAN, LTD. Dec. 2002 In regard with componen
SERVICE MANUAL CD RECEIVER KD-S735R
SERVICE MANUAL CD RECEIVER KD-S735R Area Suffix E Continental Europe EX Central Europe 45Wx4 DISP MO RND78910 11 12 RDS TP PTY SCM COMPACT DIGITAL AUDIO TABLE OF CONTENTS 1 Important Safety Precautions ..1-2 2 Disassembly method ..1-4 3 Adjustment method ..1-11 4 Description of major ICs ..1-15 No.4
CD RECEIVER CD-RECEIVER RECEPTEUR CD CD-RECEIVER KD-S735R DISP MO RND COMPACT For installation and connections, refer to the separate manual. Für den Einbau und die Anschlüsse siehe das eigenständige Handbuch.
CD RECEIVER CD-RECEIVER RECEPTEUR CD CD-RECEIVER KD-S735R 45Wx4 DISP MO RND78910 11 12 RDS TP PTY SCM COMPACT DIGITAL AUDIO For installation and connections, refer to the separate manual. Für den Einbau und die Anschlüsse siehe das eigenständige Handbuch. Pour l’installation et les raccordements, se
PARTS LIST [ KD-S735R ] - Contents -
PARTS LIST [ KD-S735R ] * All printed circuit boards and its assemblies are not available as service parts. Area suffix E - Continental Europe EX - Central Europe - Contents - Exploded view of general assembly and parts list (Block No.M1) 3- 2 CD mechanism assembly and parts list (Block No.MB) 3- 5
KD-S735R SCHEMATIC DIAGRAMS CD RECEIVER KD-S735R
KD-S735R SCHEMATIC DIAGRAMS CD RECEIVER KD-S735R CD-ROM No.SML200212 45Wx4 DISP MO RND78910 11 12 RDS TP PTY SCM COMPACT DIGITAL AUDIO Area Suffix E Continental Europe EX Central Europe Contents Block diagram 2-1 Standard schematic diagrams 2-2 Printed circuit boards 2-5~6 No.49762SCH COPYRIGHT 2002
SERVICE MANUAL
AV-16N83 SERVICE MANUAL COLOUR TELEVISION BASIC CHASSIS AV-16N83/VT CL Supplementary The following items for the AV-16N83/VT model were changed from those of the AV-16N81/VT model. Therefore, this service manual describes only the items which differ from those of the AV-16N81/VT service manual. For
SERVICE MANUAL
AV32X25EUS SERVICE MANUAL COLOUR TELEVISION 2511009924D AV32X25EUS/B BASIC CHASSIS MFII Supplementary The following items for the AV32X25EUS/B model was changed partly from AV32X25EUS model. Therefore, this service manual describes only the items which differ from those of the AV32X25EUS model servi
SERVICE MANUAL AV-20FD22
SERVICE MANUAL TV/DVD COMBO AV-20FD22 Supplementary Since some details of the AV-20FD22 service manual (No.51821, Mar. 2001) were changed, we are informing you of these changes and of the new descriptions. OUTLINE OF CHANGES About DVD DECK, only DVD ASS’Y Parts number is informed. (DK4001: X-169G000
SERVICE MANUAL AV-2178TEE/C BASIC CHASSIS
AV2178TEE SERVICE MANUAL COLOUR TELEVISION 152200121B AV-2178TEE/C BASIC CHASSIS CH Supplementary The following items for the AV-2178TEE/C model was changed partly from AV-2178TEE model. Therefore, this service manual describes only the items which differ from those of the AV-2178TEE model service m
SERVICE MANUAL
AV-21E3 SERVICE MANUAL COLOUR TELEVISION 52102028B AV-21E3/C BASIC CHASSIS CG Supplementary The following items for the AV-21E3/C model was changed partly from AV-21E3 model. Therefore, this service manual describes only the items which differ from those of the AV-21E3 model service manual. For deta
SERVICE MANUAL AV-2168TEE/C BASIC CHASSIS
AV-2168TEE SERVICE MANUAL COLOUR TELEVISION 251200231B AV-2168TEE/C BASIC CHASSIS CH Supplementary The following items for the AV-2168TEE/C model was changed partly from AV-2168TEE model. Therefore, this service manual describes only the items which differ from those of the AV-2168TEE model service