Download: AR Snap-in Terminal Type, 105°C Permissible Overvoltageseries AR PermissibleOvervoltage GU
ALUMINUM ELECTROLYTIC CAPACITORS AR Snap-in Terminal Type, 105°C Permissible Overvoltageseries Withstanding 2000 hours application of rated ripple current at 105°C. Reduction of short incidence when overvoltage (rated voltage x 1.5) is applied to a capacitor. Compliant to the RoHS directive (2002/95/EC). AR PermissibleOvervoltage GU Specifications Item Performance Characteristics Category Temperature Range – 40 to +105˚C (200 250V), – 25 to +105˚C (400 450V) Rated Voltage Range 200 to 450V Rated Capacitance Range 82 to 2200µF Capacitance Tolerance ±20% at 120Hz, 20˚C Leakage CurrentI3CV(µA) (A...
Author:
Richardson Shared: 8/19/19
Downloads: 299 Views: 3228
Content
ALUMINUM ELECTROLYTIC CAPACITORS AR Snap-in Terminal Type, 105°C Permissible Overvoltageseries
Withstanding 2000 hours application of rated ripple current at 105°C. Reduction of short incidence when overvoltage (rated voltage x 1.5) is applied to a capacitor. Compliant to the RoHS directive (2002/95/EC).AR PermissibleOvervoltage GU Specifications
Item Performance Characteristics Category Temperature Range – 40 to +105˚C (200 250V), – 25 to +105˚C (400 450V) Rated Voltage Range 200 to 450V Rated Capacitance Range 82 to 2200µF Capacitance Tolerance ±20% at 120Hz, 20˚C Leakage CurrentI3CV(µA) (After 5 minutes' application of rated voltage [C : Rated Capacitance(µF), V : Voltage ( V ) ] Tangent of loss angle (tan δ) Rated voltage (V) 200 to 400 450 Measurement frequency : 120Hz, Temperature : 20˚C tan δ (MAX.) 0.15 0.20 Measurement frequeny : 120Hz Rated voltage(V) 200 • 250 400 • 450 Stability at Low Temperature Impedance ratio Z – 25°C / Z+20°C38ZT/Z20(MAX.) Z – 40°C / Z+20°C 12 - The specifications listed at right shall be met when the Capacitance change Within ±20% of the initial capacitance value capacitors are restored to 20°CEndurance after D.C. bias plus tan δ 200% or less than the initial specified value rated ripple current is applied for 2000 hours at 105°C, the peak voltage shall not exceed the rated voltage. Leakage current Less than or equal to the initial specified value After storing the capacitors under no load at 105°C for 1000 Capacitance change Within ±15% of the initial capacitance value hours and then performing voltage treatment based Shelf Life tan δ 150% or less than the initial specified value on JIS C 5101-4 clause 4.1 at 20°C, Leakage current Less than or equal to the initial specified value they shall meet the requirements listed at right. When overvoltage (rated voltage x 1.5, limited current = 1A) is applied to a capacitor, the pressure relief vent will operate normally Safety Performance more than 60% of the time without short and flame. Marking Printed with white color letter on black sleeve.Drawing Type numbering system (Example : 400V 120µF)
12345678910 11 12 13 14 Polarity bar Sleeve (P.E.T.) LAR2G121MELZ30Case length code Case dia. code Configuration φD Code 10 Capacitance tolerance (±20%) 22 Z L±2 25 A 4.0±0.5 Rated capacitance (120µF) Pressure relief vent 30 B Rated voltage (400V) 35 C Series name 0.8 +0.2-0.1 +0.2 8 -0.1 Type. 1 00±0.1 2-2φ±0.1 1.5+0.2-0.1 (PC board hole dimensions) (Terminal dimensions) The other terminal is also available upon request. Please refer page 272 for schematic of dimensions.Frequency coefficient of rated ripple current
Frequency(Hz) 50 60 120 300 1k 10k 50k or more 200 • 250V 0.81 0.85 1.00 1.17 1.32 1.45 1.50 coeff. 400 • 450V 0.77 0.82 1.00 1.16 1.30 1.41 1.43 Minimum order quantity : 50pcs. Dimension table in next page.CAT.8100Z
φD +1.5MAX. 4.0±0.5 2.5,ALUMINUM ELECTROLYTIC CAPACITORS AR series Dimensions
200V (2D) 250V (2E) Cap. Size Rated Leakage Current Cap. Size Rated φ × ripple Code φ × ripple Leakage Current (µF) D L(mm) (mA) (mA) (µF) D L(mm) Code (mA) (mA) 390 22 × 25 1310 0.83 LAR2D391MELZ25 270 22 × 25 1100 0.77 LAR2E271MELZ25 22 × 30 1480 0.91 LAR2D471MELZ30 22 × 30 1200 0.86 LAR2E331MELZ30 470 330 25 × 25 1480 0.91 LAR2D471MELA25 25 × 25 1200 0.86 LAR2E331MELA25 560 22 × 35 1600 1.00 LAR2D561MELZ35 22 × 35 1300 0.93 LAR2E391MELZ35 22 × 40 1750 1.10 LAR2D681MELZ40 25 × 30 1300 0.93 LAR2E391MELA30 680 25 × 30 1750 1.10 LAR2D681MELA30 22 × 40 1400 1.02 LAR2E471MELZ40 30 × 25 1750 1.10 LAR2D681MELB25 470 25 × 35 1400 1.02 LAR2E471MELA35 22 × 45 2040 1.21 LAR2D821MELZ45 30 × 25 1400 1.02 LAR2E471MELB25 25 × 35 2040 1.21 LAR2D821MELA35 22 × 45 1500 1.12 LAR2E561MELZ45 22 × 50 2300 1.34 LAR2D102MELZ50 560 25 × 35 1500 1.12 LAR2E561MELA35 25 × 45 2300 1.34 LAR2D102MELA45 30 × 30 1500 1.12 LAR2E561MELB30 30 × 30 2300 1.34 LAR2D102MELB30 22 × 50 1700 1.23 LAR2E681MELZ50 35 × 25 2300 1.34 LAR2D102MELC25 25 × 40 1700 1.23 LAR2E681MELA40 25 × 50 2650 1.46 LAR2D122MELA50 30 × 30 1700 1.23 LAR2E681MELB30 1200 30 × 35 2650 1.46 LAR2D122MELB35 35 × 25 1700 1.23 LAR2E681MELC25 35 × 30 2650 1.46 LAR2D122MELC30 25 × 45 2000 1.35 LAR2E821MELA45 30 × 40 2800 1.64 LAR2D152MELB40 820 30 × 35 2000 1.35 LAR2E821MELB35 35 × 35 2800 1.64 LAR2D152MELC35 35 × 30 2000 1.35 LAR2E821MELC30 30 × 50 3080 1.80 LAR2D182MELB50 30 × 40 2200 1.50 LAR2E102MELB40 1800 1000 35 × 40 3080 1.80 LAR2D182MELC40 35 × 35 2200 1.50 LAR2E102MELC35 2200 30 × 45 3480 1.98 LAR2D222MELC45 30 × 45 2300 1.64 LAR2E122MELB45 35 × 40 2300 1.64 LAR2E122MELC40 1500 35 × 45 2500 1.83 LAR2E152MELC45 1800 35 × 50 2700 2.01 LAR2E182MELC50 400V (2G) 450V (2W) Cap. Size Ratedripple Leakage Current Cap. Size Rated ripple Leakage CurrentCode (µF) φD × L(mm) (mA) (mA) (µF) φD × L(mm) Code(mA) (mA) 100 22 × 25 680 0.60 LAR2G101MELZ25 82 22 × 25 340 0.57 LAR2W820MELZ25 120 22 × 30 730 0.65 LAR2G121MELZ30 22 × 30 690 0.63 LAR2W101MELZ30 22 × 35 950 0.80 LAR2G181MELZ35 25 × 25 690 0.63 LAR2W101MELA25 180 25 × 30 950 0.80 LAR2G181MELA30 22 × 35 720 0.69 LAR2W121MELZ35 30 × 25 950 0.80 LAR2G181MELB25 25 × 30 720 0.69 LAR2W121MELA30 22 × 45 1100 0.88 LAR2G221MELZ45 22 × 40 790 0.77 LAR2W151MELZ40 220 25 × 35 1100 0.88 LAR2G221MELA35 150 25 × 30 790 0.77 LAR2W151MELA30 30 × 25 1100 0.88 LAR2G221MELB25 30 × 25 790 0.77 LAR2W151MELB25 22 × 50 1220 0.98 LAR2G271MELZ50 22 × 45 870 0.85 LAR2W181MELZ45 25 × 40 1220 0.98 LAR2G271MELA40 180 25 × 35 870 0.85 LAR2W181MELA35 30 × 30 1220 0.98 LAR2G271MELB30 30 × 30 870 0.85 LAR2W181MELB30 35 × 25 1220 0.98 LAR2G271MELC25 25 × 40 1050 0.94 LAR2W221MELA40 25 × 45 1440 1.08 LAR2G331MELA45 220 30 × 30 1050 0.94 LAR2W221MELB30 30 × 35 1440 1.08 LAR2G331MELB35 35 × 25 1050 0.94 LAR2W221MELC25 25 × 50 1550 1.18 LAR2G391MELA50 25 × 50 1230 1.04 LAR2W271MELA50 390 30 × 40 1550 1.18 LAR2G391MELB40 270 30 × 35 1230 1.04 LAR2W271MELB35 35 × 30 1550 1.18 LAR2G391MELC30 35 × 30 1230 1.04 LAR2W271MELC30 30 × 45 1680 1.30 LAR2G471MELB45 30 × 40 1380 1.15 LAR2W331MELB40 470 330 35 × 35 1680 1.30 LAR2G471MELC35 35 × 35 1380 1.15 LAR2W331MELC35 30 × 50 1900 1.41 LAR2G561MELB50 30 × 50 1610 1.25 LAR2W391MELB50 560 390 35 × 40 1900 1.41 LAR2G561MELC40 35 × 40 1610 1.25 LAR2W391MELC40 680 35 × 45 2120 1.56 LAR2G681MELC45 470 35 × 45 1780 1.37 LAR2W471MELC45 560 35 × 50 1990 1.50 LAR2W561MELC50 Rated ripple current (mArms) at 105°C 120HzCAT.8100Z
]15
Similar documents
ALUMINUM ELECTROLYTIC CAPACITORS AQ Snap-in Terminal Type, 105°C Permissible Abnormal Voltage,Smaller-sized(692 type) series Withstanding 2000 hours application of rated ripple current of 105°C. Extended voltage range at 200V, 220V and 400V. AK Smaller case sizes and higher ripple current than AK se
ALUMINUM ELECTROLYTIC CAPACITORS AS Wide Temperature Range, Miniature Type Permissible Abnormal Voltageseries Improved safety feature for abnormally excessive voltage. AQ High ripple current product. Smaller Compliant to the RoHS directive (2002/95/EC). AS Specifications Item Performance Characteris
ALUMINUM ELECTROLYTIC CAPACITORS PB Miniature Sized, High Ripple Current High Reliabilityseries High ripple current load life of 5000 / 7000 hours at +105°C. Suited for ballast application. Compliant to the RoHS directive (2002/95/EC). CA Long Life PB Smaller PT Specifications Item Performance Chara
ALUMINUM ELECTROLYTIC CAPACITORS AQ Wide Temperature Range, Permissible Abnormal Voltage(Radial Lead Type) series Improved safety feature for abnormally excessive voltage. High ripple current product. AQ Compliant to the RoHS directive (2002/95/EC). Smaller AS Specifications Item Performance Charact
GU Snap-in Terminal Type, 105°C Standardseries Withstanding 3000 hours application of rated ripple current at 105°C. Compliant to the RoHS directive (2002/95/EC). GW High Lipple Current GU Smaller Low Profile GN GJ Specifications Item Performance Characteristics Category Temperature Range – 40 to +
ALUMINUM ELECTROLYTIC CAPACITORS BW High Temperature Range, For +135°C Useseries BX Highly dependable reliability withstanding load life of 1000 to 3000 hours at +135°C. High Tem perature Suited for automobile electronics where heavy duty services are indispensable. Compliant to the RoHS directive (
KS Snap-in Terminal Type, For Audio Equipment,Smaller-sizedseries Smaller and high-tone quality than KG series TYPE-1grade. An effect to tone quallity improvement by replacement from KG a small standard product to use. TYPE -1 Compliant to the RoHS directive (2002/95/EC). Smaller KS Specifications I
ALUMINUM ELECTROLYTIC CAPACITORS MA 5mmL, Standard, For General Purposesseries Standard series with 5mm height. MT Compliant to the RoHS directive (2002/95/EC). High Tem perature MV Long Life MA Bi-polarized MP MF LowImpedance Specifications Item Performance Characteristics Category Temperature Rang
ALUMINUM ELECTROLYTIC CAPACITORS GX Snap-in Terminal Type,105°C Long Life Assurannce, Smaller-Sized series Long life assurance series withstanding 5000 hours application of rated ripple current at 105°C. Suited for rectifier circuit of general inverter, switching power supply. GY Compliant to the Ro
ALUMINUM ELECTROLYTIC CAPACITORS MP 5mmL, Bi-Polarizedseries Bi-polarized series with 5mm height. Compliant to the RoHS directive (2002/95/EC). MP Bi-polarized MA Specifications Item Performance Characteristics Category Temperature Range –40 to +85°C Rated Voltage Range 6.3 to 50V Rated Capacitance
ALUMINUM ELECTROLYTIC CAPACITORS MT 5mmL, Wide Temperature Range series Wide temperature range of –55 to +105°C, with 5mm height. Compliant to the RoHS directive (2002/95/EC). MV Long life MT High Temperature Specifications MA Item Performance Characteristics Category Temperature Range –55 to +105°C
PM Extremely Low Impedance, High Reliability series High reliability withstanding 5000 hour load life at +105°C (3000/2000 hours for (through 100V only) smaller case sizes as specified below). Capacitance ranges available based on the numerical values in E12 series under JIS. PM Compliant to the RoH
ALUMINUM ELECTROLYTIC CAPACITORS HZ Ultra Low Impedance,For PC motherboardseries Lower impedance than HN series. Compliant to the RoHS directive (2002/95/EC). HZ LowImpedance HN Specifications ltem Performance Characteristics Category Temperature –25 to +105˚C Rated Voltage Range 6.3 to 16V Rated Ca
LS Snap-in Terminal Type, 85°C Standardseries Withstanding 3000 hours application of rated ripple current at 85°C. Compliant to the RoHS directive (2002/95/EC). LS Smaller LG Specifications Item Performance Characteristics Category Temperature Range – 40 to +85°C (16 to 250V), – 25 to +85°C (350 to
ALUMINUM ELECTROLYTIC CAPACITORS MV 5mmL, Long Life Assuranceseries Extended load life of 5000 hours at +105°C, with 5mm height. Compliant to the RoHS directive (2002/95/EC). SV Smaller MV MTLong Life MF Specifications Item Performance Characteristics Category Temperature Range –40 to +105°C Rated V
ALUMINUM ELECTROLYTIC CAPACITORS GR Snap-in Terminal Type, 105°C Long Life Assuranceseries Long life assurance series withstanding 10000 hours application of ripple current at 105°C. Compliant of the RoHS directive (2002/95/EC). GR Long Life GY Specifications Item Performance Characteristics Categor
ALUMINUM ELECTROLYTIC CAPACITORS ES Bi-Polarized, For Audio Equipmentseries Bi-polarized “nichicon MUSE” acoustic series. Suited for audio signal circuits. Compliant to the RoHS directive (2002/95/EC). ES Bi-polarized FW Specifications Item Performance Characteristics Category Temperature Range –40
ALUMINUM ELECTROLYTIC CAPACITORS KX Snap-in Terminal Type, For Audio Equipment,of Switching Power Suppliesseries In order to get high quality sound from 105°C standard series. Materials have been chosen carefully to achieve quality sound. Compliant to the RoHS directive (2002/95/EC). Specifications
ALUMINUM ELECTROLYTIC CAPACITORS CA Miniature Sized, High Ripple Current, Long Lifeseries High ripple current and Long Life product withstanding load life of 12000 hours(10000 hours for φD=10) at +105°C. Suited for ballast application. Compliant to the RoHS directive (2002/95/EC). PB Long Life CA Sm
ALUMINUM ELECTROLYTIC CAPACITORS BX High Temperature Range, For +150°C Useseries Laminated case series. Suited for automobile electronics where heavy duty services are indispensable. Compliant to the RoHS directive (2002/95/EC). BX High Temperature BW Item Performance Characteristics Category Temper
HE Miniature Sized, Low Impedance,High Reliability Approved by Reliability Center for ElectronicComponent, Japan-Certification No. RCJ-03-23Cseries Low impedance and high reliability withstanding 4000 hours to 10000 hours. Compliant to the RoHS directive (2002/95/EC). HE Long Life HD Specifications
ALUMINUM ELECTROLYTIC CAPACITORS HV High Ripple Low Impedance Approved by Reliability Center for ElectronicComponent, Japan-Certification No. RCJ-03-23Cseries Lower impedance at high frequency range. Smaller case size and high ripple current. Compliant to the RoHS directive (2002/95/EC). HD Smaller
ALUMINUM ELECTROLYTIC CAPACITORS MW 5mmL, For General Audio Equipmentseries Acoustic series, with 5mm height. Compliant to the RoHS directive (2002/95/EC). SW Smaller MW Specifications Item Performance Characteristics Category Temperature Range –40 to +85°C Rated Voltage Range 4 to 50V Rated Capacit
ALUMINUM ELECTROLYTIC CAPACITORS Approved by Reliability Center for Electronic HN Ultra Low Impedance, Component, Japan-Certification No. RCJ-03-23CFor PC motherboardseries Lower impedance than HM series. Compliant to the RoHS directive (2002/95/EC). HZ Low LowImpedance HN Impedance HM Specification
KG Lug / Snap-in Terminal Type,For Audio Equipmentseries Disigned for high grade audio equipment, giving priority to high fidelity sound quality. The variation expansion of the KG series. TYPE-1: The low profile high tone quality grade of the new development Super Through electrolyte adoption. TYPE-
ALUMINUM ELECTROLYTIC CAPACITORS HC Low Impedance Approved by Reliability Center for ElectronicComponent, Japan-Certification No. RCJ-03-23Cseries Lower impedance than HD series. Compliant to the RoHS directive (2002/95/EC). Products which are scheduled to be discontinued. Not recommended for new de
ALUMINUM ELECTROLYTIC CAPACITORS GJ Snap-in Terminal Type, 105°C Low-Profile Sizedseries GU Low Profile Withstanding 3000 hours application of rated ripple current at 105°C. Ideally suited for flat design fo switching power supply. GJ Addition of 450V rated voltage. Compliant to the RoHS directive (
ALUMINUM ELECTROLYTIC CAPACITORS CY Miniature Sized, High Ripple Current, High Reliabilityseries High ripple current and Long Life product withstanding CS load life of 8000 to 10000 hours at +105°C. Suited for ballast application. Smaller Compliant to the RoHS directive (2002/95/EC). CY Specificatio
ALUMINUM ELECTROLYTIC CAPACITORS KL Low Leakage Currentseries Standard low leakage current series. Compliant to the RoHS directive (2002/95/EC). VR Low LeakageCurrent KL Specifications Item Performance Characteristics Category Temperature Range –40 to +85°C ( –40 to +105°C product also available upo
PJ Low Impedance, For Switching Power Supplies series Low impedance and high reliability withstanding 5000 hours load life at +105˚C (3000 / 2000 hours for smaller case sizes as specified below). Capacitance ranges available based on the numerical values in E12 series under JIS. Ideally suited for u