Download: ALUMINUM ELECTROLYTIC CAPACITORS AQ Snap-in Terminal Type, 105°C Permissible Abnormal Voltage,Smaller-sized(692 type) series
ALUMINUM ELECTROLYTIC CAPACITORS AQ Snap-in Terminal Type, 105°C Permissible Abnormal Voltage,Smaller-sized(692 type) series Withstanding 2000 hours application of rated ripple current of 105°C. Extended voltage range at 200V, 220V and 400V. AK Smaller case sizes and higher ripple current than AK series. Smaller Improved safety features for abnormally excessive voltage. Ideally suited for the equipment used at voltage fluctuating area. Compliant to the RoHS directive (2002/95/EC). AQ Specifications Item Performance Characteristics Category Temperature Range –25 to +105°C Rated Voltage Range 20...
Author:
Richardson Shared: 8/19/19
Downloads: 258 Views: 596
Content
ALUMINUM ELECTROLYTIC CAPACITORS AQ Snap-in Terminal Type, 105°C Permissible Abnormal Voltage,Smaller-sized(692 type) series
Withstanding 2000 hours application of rated ripple current of 105°C. Extended voltage range at 200V, 220V and 400V. AK Smaller case sizes and higher ripple current than AK series. Smaller Improved safety features for abnormally excessive voltage. Ideally suited for the equipment used at voltage fluctuating area. Compliant to the RoHS directive (2002/95/EC). AQSpecifications
Item Performance Characteristics Category Temperature Range –25 to +105°C Rated Voltage Range 200 • 220 • 400V Rated Capacitance Range 33 to 1500µF Capacitance Tolerance ±20% at 120Hz, 20°C Leakage CurrentI3CV (µA) (After 5 minutes' application of rated voltage) [C : Rated Capacitance (µF) V : Voltage (V)] Tangent of loss angle (tan δ) 0.20MAX. 120Hz, 20°C Rated voltage(V) 200 • 220 400 Stability at Low Temperature Measurement frequency : 120Hz Impedance ratio (MAX) Z – 25°C/Z+20°C88The specifications listed at right shall be met when the Capacitance change Within ±20% of the initial capacitance value capacitors are restored to 20°C after D.C. bias plus ratedEndurance ripple current is applied for 2000 hours at 105°C, the tan δ 200% or less than the initial specified value peak voltage shall not exceed the rated voltage. Leakage current Less than or equal to the initial specified value After storing the capacitors under no load at 105°C for 1000 Capacitance change Within ±15% of the initial capacitance value hours and then performing voltage treatment based Shelf Life on JIS C 5101-4 clause 4.1 at 20°C, tan δ 150% or less than the initial specified value they shall meet the requirements listed at right. Leakage current Less than or equal to the initial specified value The pressure relief vent will operate in normal conditions, with no dangerous conditions such as flames, ignitions or dispersion of pieces of the capacitor and / or case. Rating Test conditions Voltage (V) Rated Capacitance (µF) Limited DC current Test voltage 330 C < 3304A200 330 C < 4705A300VDC and 375VDC 470 C < 4707ASafety Performance 330 C < 3304A220 330 C < 4705A320VDC and 405VDC 470 C < 4707A330 C < 1002A400 100 C < 2204A500VDC and 600VDC 220 C < 4707AMarking Printed with white color letter on black sleeveDrawing Type numbering system (Example : 200V 680µF)
Bottom plate Polarity bar (code ZB only) Sleeve (P.E.T.) 12345678910 11 12 13 14 15 16LAQ2D681MELA40
Bottom Plate Case length code ZB With Bottom Case dia. code Plate 10 Without Configuration φD Code code lessL±2 Bottom Plate 22 Z Pressure relief vent 4.0±0.5 Capacitance tolerance (±20%) 25 A Rated capacitance (680µF) 30 B Rated voltage (200V) 35 C 0.8 +0.210± -0.1 0.2+ Series name0.1 8 -0.10. Type Please contact to us if other configurations are required. 2-2 φ±0.1 1.5 +0.2-0.1 (PC board hole dimensions) (Terminal dimensions) Minimum order quantity : 50pcs. Dimension table in next page.CAT.8100Z
φD +1MAX. 4.0±0.5 2.5,ALUMINUM ELECTROLYTIC CAPACITORS AQ series Dimensions
200V (2D) 220V (2P) Cap. Size Ripple Leakage Current Cap. Size Ripple Leakage Current Code Code (µF) φD × L(mm) (mA) (mA) (µF) φD × L(mm) (mA) (mA) 22 × 25 700 0.80 LAQ2D181MELZ25 100 22 × 20 500 0.60 LAQ2P101MELZ20 25 × 20 700 0.80 LAQ2D181MELA20 120 22 × 25 600 0.65 LAQ2P121MELZ25 220 22 × 25 900 0.88 LAQ2D221MELZ25 22 × 25 650 0.73 LAQ2P151MELZ25 270 22 × 25 1000 0.98 LAQ2D271MELZ25 25 × 20 650 0.73 LAQ2P151MELA20 22 × 30 1200 1.08 LAQ2D331MELZ30 22 × 25 700 0.80 LAQ2P181MELZ25 330 180 25 × 25 1200 1.08 LAQ2D331MELA25 25 × 25 700 0.80 LAQ2P181MELA25 22 × 35 1350 1.18 LAQ2D391MELZ35 22 × 30 900 0.88 LAQ2P221MELZ30 25 × 30 1350 1.18 LAQ2D391MELA30 220 25 × 25 900 0.88 LAQ2P221MELA25 22 × 40 1450 1.30 LAQ2D471MELZ40 30 × 20 900 0.88 LAQ2P221MELB20 470 25 × 30 1450 1.30 LAQ2D471MELA30 22 × 35 1000 0.98 LAQ2P271MELZ35 30 × 25 1450 1.30 LAQ2D471MELB25 25 × 30 1000 0.98 LAQ2P271MELA30 22 × 45 1600 1.41 LAQ2D561MELZ45 30 × 25 1000 0.98 LAQ2P271MELB25 560 25 × 35 1600 1.41 LAQ2D561MELA35 35 × 20 1000 0.98 LAQ2P271MELC20 30 × 30 1600 1.41 LAQ2D561MELB30 22 × 40 1200 1.08 LAQ2P331MELZ40 22 × 50 1750 1.56 LAQ2D681MELZ50 25 × 30 1200 1.08 LAQ2P331MELA30 25 × 40 1750 1.56 LAQ2D681MELA40 30 × 25 1200 1.08 LAQ2P331MELB25 30 × 30 1750 1.56 LAQ2D681MELB30 35 × 25 1200 1.08 LAQ2P331MELC25 35 × 25 1750 1.56 LAQ2D681MELC25 22 × 45 1350 1.18 LAQ2P391MELZ45 25 × 50 2110 1.71 LAQ2D821MELA50 25 × 35 1350 1.18 LAQ2P391MELA35 820 30 × 35 2110 1.71 LAQ2D821MELB35 30 × 30 1350 1.18 LAQ2P391MELB30 35 × 30 2110 1.71 LAQ2D821MELC30 35 × 25 1350 1.18 LAQ2P391MELC25 30 × 45 2400 1.89 LAQ2D102MELB45 25 × 40 1450 1.30 LAQ2P471MELA40 35 × 35 2400 1.89 LAQ2D102MELC35 470 30 × 30 1450 1.30 LAQ2P471MELB30 30 × 50 2650 2.07 LAQ2D122MELB50 35 × 25 1450 1.30 LAQ2P471MELC25 35 × 40 2650 2.07 LAQ2D122MELC40 25 × 45 1600 1.41 LAQ2P561MELA45 1500 35 × 45 3080 2.32 LAQ2D152MELC45 560 30 × 35 1600 1.41 LAQ2P561MELB35 35 × 30 1600 1.41 LAQ2P561MELC30 400V (2G) 30 × 40 1750 1.56 LAQ2P681MELB40680 Cap. Size Ripple Leakage Current 35 × 35 1750 1.56 LAQ2P681MELC35 φD × L(mm) (m ) Code(µF) A (mA) 30 × 45 2110 1.71 LAQ2P821MELB45 33 22 × 25 250 0.36 LAQ2G330MELZ25 35 × 40 2110 1.71 LAQ2P821MELC40 39 22 × 25 300 0.39 LAQ2G390MELZ25 1000 35 × 45 2400 1.89 LAQ2P102MELC45 47 22 × 25 350 0.43 LAQ2G470MELZ25 56 22 × 25 450 0.47 LAQ2G560MELZ25 68 22 × 25 510 0.52 LAQ2G680MELZ25 22 × 30 580 0.57 LAQ2G820MELZ30 25 × 25 580 0.57 LAQ2G820MELA25 22 × 30 660 0.63 LAQ2G101MELZ30 25 × 25 660 0.63 LAQ2G101MELA25 22 × 35 760 0.69 LAQ2G121MELZ35 120 25 × 30 760 0.69 LAQ2G121MELA30 30 × 25 760 0.69 LAQ2G121MELB25 22 × 40 850 0.77 LAQ2G151MELZ40 150 25 × 35 850 0.77 LAQ2G151MELA35 30 × 25 850 0.77 LAQ2G151MELB25 25 × 40 950 0.85 LAQ2G181MELA40 180 30 × 30 950 0.85 LAQ2G181MELB30 35 × 25 950 0.85 LAQ2G181MELC25 25 × 45 1240 0.94 LAQ2G221MELA45 220 30 × 35 1240 0.94 LAQ2G221MELB35 35 × 30 1240 0.94 LAQ2G221MELC30 30 × 40 1300 1.04 LAQ2G271MELB40 35 × 35 1300 1.04 LAQ2G271MELC35 30 × 45 1470 1.15 LAQ2G331MELB45 × Frequency coefficient of rated ripple current35 35 1470 1.15 LAQ2G331MELC35 390 35 × 40 Frequency (Hz) 50 60 120 1k 10k or more1590 1.25 LAQ2G391MELC40 200•220V 0.85 0.88 1.00 1.15 1.20 470 35 × 45 1870 1.37 LAQ2G471MELC45 Coefficient 400V 0.88 0.90 1.00 1.10 1.15 Rated ripple current (mArms) at 105°C 120HzCAT.8100Z
]15
Similar documents
ALUMINUM ELECTROLYTIC CAPACITORS AS Wide Temperature Range, Miniature Type Permissible Abnormal Voltageseries Improved safety feature for abnormally excessive voltage. AQ High ripple current product. Smaller Compliant to the RoHS directive (2002/95/EC). AS Specifications Item Performance Characteris
ALUMINUM ELECTROLYTIC CAPACITORS PB Miniature Sized, High Ripple Current High Reliabilityseries High ripple current load life of 5000 / 7000 hours at +105°C. Suited for ballast application. Compliant to the RoHS directive (2002/95/EC). CA Long Life PB Smaller PT Specifications Item Performance Chara
ALUMINUM ELECTROLYTIC CAPACITORS AQ Wide Temperature Range, Permissible Abnormal Voltage(Radial Lead Type) series Improved safety feature for abnormally excessive voltage. High ripple current product. AQ Compliant to the RoHS directive (2002/95/EC). Smaller AS Specifications Item Performance Charact
GU Snap-in Terminal Type, 105°C Standardseries Withstanding 3000 hours application of rated ripple current at 105°C. Compliant to the RoHS directive (2002/95/EC). GW High Lipple Current GU Smaller Low Profile GN GJ Specifications Item Performance Characteristics Category Temperature Range – 40 to +
ALUMINUM ELECTROLYTIC CAPACITORS BW High Temperature Range, For +135°C Useseries BX Highly dependable reliability withstanding load life of 1000 to 3000 hours at +135°C. High Tem perature Suited for automobile electronics where heavy duty services are indispensable. Compliant to the RoHS directive (
KS Snap-in Terminal Type, For Audio Equipment,Smaller-sizedseries Smaller and high-tone quality than KG series TYPE-1grade. An effect to tone quallity improvement by replacement from KG a small standard product to use. TYPE -1 Compliant to the RoHS directive (2002/95/EC). Smaller KS Specifications I
ALUMINUM ELECTROLYTIC CAPACITORS MA 5mmL, Standard, For General Purposesseries Standard series with 5mm height. MT Compliant to the RoHS directive (2002/95/EC). High Tem perature MV Long Life MA Bi-polarized MP MF LowImpedance Specifications Item Performance Characteristics Category Temperature Rang
ALUMINUM ELECTROLYTIC CAPACITORS GX Snap-in Terminal Type,105°C Long Life Assurannce, Smaller-Sized series Long life assurance series withstanding 5000 hours application of rated ripple current at 105°C. Suited for rectifier circuit of general inverter, switching power supply. GY Compliant to the Ro
ALUMINUM ELECTROLYTIC CAPACITORS MP 5mmL, Bi-Polarizedseries Bi-polarized series with 5mm height. Compliant to the RoHS directive (2002/95/EC). MP Bi-polarized MA Specifications Item Performance Characteristics Category Temperature Range –40 to +85°C Rated Voltage Range 6.3 to 50V Rated Capacitance
ALUMINUM ELECTROLYTIC CAPACITORS MT 5mmL, Wide Temperature Range series Wide temperature range of –55 to +105°C, with 5mm height. Compliant to the RoHS directive (2002/95/EC). MV Long life MT High Temperature Specifications MA Item Performance Characteristics Category Temperature Range –55 to +105°C
PM Extremely Low Impedance, High Reliability series High reliability withstanding 5000 hour load life at +105°C (3000/2000 hours for (through 100V only) smaller case sizes as specified below). Capacitance ranges available based on the numerical values in E12 series under JIS. PM Compliant to the RoH
ALUMINUM ELECTROLYTIC CAPACITORS HZ Ultra Low Impedance,For PC motherboardseries Lower impedance than HN series. Compliant to the RoHS directive (2002/95/EC). HZ LowImpedance HN Specifications ltem Performance Characteristics Category Temperature –25 to +105˚C Rated Voltage Range 6.3 to 16V Rated Ca
LS Snap-in Terminal Type, 85°C Standardseries Withstanding 3000 hours application of rated ripple current at 85°C. Compliant to the RoHS directive (2002/95/EC). LS Smaller LG Specifications Item Performance Characteristics Category Temperature Range – 40 to +85°C (16 to 250V), – 25 to +85°C (350 to
ALUMINUM ELECTROLYTIC CAPACITORS MV 5mmL, Long Life Assuranceseries Extended load life of 5000 hours at +105°C, with 5mm height. Compliant to the RoHS directive (2002/95/EC). SV Smaller MV MTLong Life MF Specifications Item Performance Characteristics Category Temperature Range –40 to +105°C Rated V
ALUMINUM ELECTROLYTIC CAPACITORS GR Snap-in Terminal Type, 105°C Long Life Assuranceseries Long life assurance series withstanding 10000 hours application of ripple current at 105°C. Compliant of the RoHS directive (2002/95/EC). GR Long Life GY Specifications Item Performance Characteristics Categor
ALUMINUM ELECTROLYTIC CAPACITORS ES Bi-Polarized, For Audio Equipmentseries Bi-polarized “nichicon MUSE” acoustic series. Suited for audio signal circuits. Compliant to the RoHS directive (2002/95/EC). ES Bi-polarized FW Specifications Item Performance Characteristics Category Temperature Range –40
ALUMINUM ELECTROLYTIC CAPACITORS KX Snap-in Terminal Type, For Audio Equipment,of Switching Power Suppliesseries In order to get high quality sound from 105°C standard series. Materials have been chosen carefully to achieve quality sound. Compliant to the RoHS directive (2002/95/EC). Specifications
ALUMINUM ELECTROLYTIC CAPACITORS CA Miniature Sized, High Ripple Current, Long Lifeseries High ripple current and Long Life product withstanding load life of 12000 hours(10000 hours for φD=10) at +105°C. Suited for ballast application. Compliant to the RoHS directive (2002/95/EC). PB Long Life CA Sm
ALUMINUM ELECTROLYTIC CAPACITORS BX High Temperature Range, For +150°C Useseries Laminated case series. Suited for automobile electronics where heavy duty services are indispensable. Compliant to the RoHS directive (2002/95/EC). BX High Temperature BW Item Performance Characteristics Category Temper
HE Miniature Sized, Low Impedance,High Reliability Approved by Reliability Center for ElectronicComponent, Japan-Certification No. RCJ-03-23Cseries Low impedance and high reliability withstanding 4000 hours to 10000 hours. Compliant to the RoHS directive (2002/95/EC). HE Long Life HD Specifications
ALUMINUM ELECTROLYTIC CAPACITORS HV High Ripple Low Impedance Approved by Reliability Center for ElectronicComponent, Japan-Certification No. RCJ-03-23Cseries Lower impedance at high frequency range. Smaller case size and high ripple current. Compliant to the RoHS directive (2002/95/EC). HD Smaller
ALUMINUM ELECTROLYTIC CAPACITORS MW 5mmL, For General Audio Equipmentseries Acoustic series, with 5mm height. Compliant to the RoHS directive (2002/95/EC). SW Smaller MW Specifications Item Performance Characteristics Category Temperature Range –40 to +85°C Rated Voltage Range 4 to 50V Rated Capacit
ALUMINUM ELECTROLYTIC CAPACITORS Approved by Reliability Center for Electronic HN Ultra Low Impedance, Component, Japan-Certification No. RCJ-03-23CFor PC motherboardseries Lower impedance than HM series. Compliant to the RoHS directive (2002/95/EC). HZ Low LowImpedance HN Impedance HM Specification
KG Lug / Snap-in Terminal Type,For Audio Equipmentseries Disigned for high grade audio equipment, giving priority to high fidelity sound quality. The variation expansion of the KG series. TYPE-1: The low profile high tone quality grade of the new development Super Through electrolyte adoption. TYPE-
ALUMINUM ELECTROLYTIC CAPACITORS HC Low Impedance Approved by Reliability Center for ElectronicComponent, Japan-Certification No. RCJ-03-23Cseries Lower impedance than HD series. Compliant to the RoHS directive (2002/95/EC). Products which are scheduled to be discontinued. Not recommended for new de
ALUMINUM ELECTROLYTIC CAPACITORS GJ Snap-in Terminal Type, 105°C Low-Profile Sizedseries GU Low Profile Withstanding 3000 hours application of rated ripple current at 105°C. Ideally suited for flat design fo switching power supply. GJ Addition of 450V rated voltage. Compliant to the RoHS directive (
ALUMINUM ELECTROLYTIC CAPACITORS CY Miniature Sized, High Ripple Current, High Reliabilityseries High ripple current and Long Life product withstanding CS load life of 8000 to 10000 hours at +105°C. Suited for ballast application. Smaller Compliant to the RoHS directive (2002/95/EC). CY Specificatio
ALUMINUM ELECTROLYTIC CAPACITORS KL Low Leakage Currentseries Standard low leakage current series. Compliant to the RoHS directive (2002/95/EC). VR Low LeakageCurrent KL Specifications Item Performance Characteristics Category Temperature Range –40 to +85°C ( –40 to +105°C product also available upo
PJ Low Impedance, For Switching Power Supplies series Low impedance and high reliability withstanding 5000 hours load life at +105˚C (3000 / 2000 hours for smaller case sizes as specified below). Capacitance ranges available based on the numerical values in E12 series under JIS. Ideally suited for u
ALUMINUM ELECTROLYTIC CAPACITORS GL Snap-in Terminal Type, 105°C Ultra-Smaller-Sizedseries One rank smaller case sized than GG series. Suited for equipment down sizing. GG Compliant to the RoHS directive (2002/95/EC). Smaller GL Specifications Item Performance Characteristics Category Temperature Ra