Download: GR Snap-in Terminal Type, 105°C Long Life Assuranceseries GR Long Life GY
ALUMINUM ELECTROLYTIC CAPACITORS GR Snap-in Terminal Type, 105°C Long Life Assuranceseries Long life assurance series withstanding 10000 hours application of ripple current at 105°C. Compliant of the RoHS directive (2002/95/EC). GR Long Life GY Specifications Item Performance Characteristics Category Temperature Range – 40 to +105°C (200 250V) , – 25 to +105°C (400 450V) Rated Voltage Range 200 to 450V Rated Capacitance Range 39 to 1500µF Capacitance Tolerance ±20% at 120Hz, 20°C Leakage CurrentI3CV (µA) (After 5 minutes' application of rated voltage) [C : Rated Capacitance (µF) V : Voltage (V...
Author:
Richardson Shared: 8/19/19
Downloads: 640 Views: 1878
Content
ALUMINUM ELECTROLYTIC CAPACITORS GR Snap-in Terminal Type, 105°C Long Life Assuranceseries
Long life assurance series withstanding 10000 hours application of ripple current at 105°C. Compliant of the RoHS directive (2002/95/EC).GR Long Life GY Specifications
Item Performance Characteristics Category Temperature Range – 40 to +105°C (200 250V) , – 25 to +105°C (400 450V) Rated Voltage Range 200 to 450V Rated Capacitance Range 39 to 1500µF Capacitance Tolerance ±20% at 120Hz, 20°C Leakage CurrentI3CV (µA) (After 5 minutes' application of rated voltage) [C : Rated Capacitance (µF) V : Voltage (V)] Measurement frequency : 120Hz, Temperature : 20°C Tangent of loss angle (tan δ) Rated voltage(V) 200 to 400 450 tan δ (MAX.) 0.15 0.20 Measurement frequency : 120Hz Rated voltage (V) 200 250 400 450 Stability at Low Temperature Impedance ratio Z–25°C/Z+20°C38ZT/Z20 (MAX.) Z–40°C/Z+20°C 12 — The specifications listed at right shall be met when the Capacitance change Within ±25% of the initial capacitance value capacitors are restored to 20°C after D.C. bias plus rated Endurance ripple current is applied for 10000 hours at 105°C, the tan δ 250% or less than the initial specified value peak voltage shall not exceed the rated voltage. Leakage current Less than or equal to the initial specified value After storing the capacitors under no load at 105°C for Capacitance change Within ±15% of the initial capacitance value 1000 hours and then performing voltage treatment based Shelf Life on JIS C 5101-4 clause 4.1 at 20°C, tan δ 150% or less than the initial specified value they shall meet the requirements listed at right. Leakage current Less than or equal to the initial specified value Marking Printed with white color letter on black sleeve.Drawing Type numbering system (Example : 400V 120µF)
Polarity bar Sleeve (P.E.T.) 12345678910 11 12 13 14LGR2G121MELZ40
Case length code Case dia. code Configuration φD Code ± Capacitance tolerance (±20%) 22 ZL 2 Rated capacitance (120µF) 25 A 4.0±0.5 30 B Rated voltage (400V) Pressure relief vent 35 C 0.8 +0.2 Series name-0.1 +0. 8 -0.110± 0. Type0.1 2-2φ ±0.1 +0.2 1.5 -0.1 (PC board hole dimensions) (Terminal dimensions) The other terminal is also available upon request. Please refer page 272 for schematic of dimensions.Frequency coefficient of rated ripple current
Frequency (Hz) 50 60 120 300 1k 10k 50k or more 200 • 250V 0.81 0.85 1.00 1.17 1.32 1.45 1.50 Coeff. 400 • 450V 0.77 0.82 1.00 1.16 1.30 1.41 1.43 Minimum order quantity : 50pcs. Dimension table in next page.CAT.8100Z
φD +1.5MAX. 4.0±0.5 2.5,ALUMINUM ELECTROLYTIC CAPACITORS GR series Dimensions
200V (2D) 250V (2E) Cap. Size Rated ripple Leakage Current Code Cap. Size Rated ripple Leakage Current (µF) φD × L(mm) (mA) (mA) (µF) φD × L(mm) Code(mA) (mA) 220 22 × 25 1000 0.62 LGR2D221MELZ25 22 × 30 900 0,63 LGR2E181MELZ30 22 × 30 1100 0.69 LGR2D271MELZ30 270 25 × 25 900 0.63 LGR2E181MELA25 25 × 25 1100 0.69 LGR2D271MELA25 22 × 30 1000 0.70 LGR2E221MELZ30 × 22022 30 1200 0.77 LGR2D331MELZ30 330 25 × 25 1000 0.70 LGR2E221MELA25 25 × 25 1200 0.77 LGR2D331MELA25 22 × 35 1100 0.77 LGR2E271MELZ35 22 × 35 1300 0.83 LGR2D391MELZ35 270 25 × 30 1100 0.77 LGR2E271MELA30 390 25 × 30 1300 0.83 LGR2D391MELA30 30 × 25 1100 0.77 LGR2E271MELB25 30 × 25 1300 0.83 LGR2D391MELB25 22 × 40 1200 0.86 LGR2E331MELZ40 22 × 40 1400 0.91 LGR2D471MELZ40 330 25 × 35 1200 0.86 LGR2E331MELA35 470 25 × 35 1400 0.91 LGR2D471MELA35 30 × 25 1200 0.86 LGR2E331MELB25 30 × 30 1400 0.91 LGR2D471MELB30 22 × 45 1300 0.93 LGR2E391MELZ45 22 × 45 1500 1.00 LGR2D561MELZ45 390 25 × 35 1300 0.93 LGR2E391MELA35 560 25 × 35 1500 1.00 LGR2D561MELA35 30 × 30 1300 0.93 LGR2E391MELB30 30 × 30 1500 1.00 LGR2D561MELB30 25 × 45 1400 1.02 LGR2E471MELA45 25 × 40 1700 1.10 LGR2D681MELA40 680 470 30 × 35 1400 1.02 LGR2E471MELB35 30 × 35 1700 1.10 LGR2D681MELB35 35 × 30 1400 1.02 LGR2E471MELC30 25 × 50 2000 1.21 LGR2D821MELA50 25 × 50 1500 1.12 LGR2E561MELA50 820 30 × 40 2000 1.21 LGR2D821MELB40 560 30 × 35 1500 1.12 LGR2E561MELB35 35 × 30 2000 1.21 LGR2D821MELC30 35 × 30 1500 1.12 LGR2E561MELC30 30 × 45 2200 1.34 LGR2D102MELB45 1000 30 × 45 1700 1.23 LGR2E681MELB45680 35 × 35 2200 1.34 LGR2D102MELC35 35 × 35 1700 1.23 LGR2E681MELC35 30 × 50 2300 1.46 LGR2D122MELB50 1200 30 × 50 2000 1.35 LGR2E821MELB50820 35 × 40 2300 1.46 LGR2D122MELC40 35 × 40 2000 1.35 LGR2E821MELC40 1500 35 × 50 2500 1.64 LGR2D152MELC50 1000 35 × 45 2200 1.50 LGR2E102MELC45 1200 35 × 50 2300 1.64 LGR2E122MELC50 400V (2G) 450V (2W) Cap. Size Rated ripple Leakage Current Cap. SizeCode Rated ripple Leakage Current (µF) φD × L(mm) Code(mA) (mA) (µF) φD × L(mm) (mA) (mA) 56 22 × 25 510 0.44 LGR2G560MELZ25 39 22 × 25 370 0.39 LGR2W390MELZ25 22 × 30 560 0.49 LGR2G680MELZ30 47 22 × 30 400 0.43 LGR2W470MELZ3068 25 × 25 560 0.49 LGR2G680MELA25 22 × 35 470 0.47 LGR2W560MELZ3556 22 × 35 640 0.54 LGR2G820MELZ35 25 × 25 470 0.47 LGR2W560MELA2582 25 × 25 640 0.54 LGR2G820MELA25 22 × 40 530 0.52 LGR2W680MELZ4068 22 × 35 690 0.60 LGR2G101MELZ35 25 × 30 530 0.52 LGR2W680MELA30100 25 × 30 690 0.60 LGR2G101MELA30 22 × 45 560 0.57 LGR2W820MELZ45 22 × 40 750 0.65 LGR2G121MELZ40 82 25 × 35 560 0.57 LGR2W820MELA35 120 25 × 35 750 0.65 LGR2G121MELA35 30 × 25 560 0.57 LGR2W820MELB25 30 × 25 750 0.65 LGR2G121MELB25 22 × 50 640 0.63 LGR2W101MELZ50 22 × 50 820 0.73 LGR2G151MELZ50 100 25 × 40 640 0.63 LGR2W101MELA40 150 25 × 40 820 0.73 LGR2G151MELA40 30 × 30 640 0.63 LGR2W101MELB30 30 × 30 820 0.73 LGR2G151MELB30 25 × 45 720 0.69 LGR2W121MELA45120 25 × 45 900 0.80 LGR2G181MELA45 30 × 30 720 0.69 LGR2W121MELB30 180 30 × 35 900 0.80 LGR2G181MELB35 25 × 50 790 0.77 LGR2W151MELA50 35 × 25 900 0.80 LGR2G181MELC25 150 30 × 40 790 0.77 LGR2W151MELB40 25 × 50 1000 0.88 LGR2G221MELA50 35 × 30 790 0.77 LGR2W151MELC30 220 30 × 40 1000 0.88 LGR2G221MELB40 30 × 45 870 0.85 LGR2W181MELB45180 35 × 30 1000 0.88 LGR2G221MELC30 35 × 35 870 0.85 LGR2W181MELC35 30 45 1100 0.98 LGR2G271MELB45 30 × 50 1000 0.94 LGR2W221MELB50 270 × 220 35 × 35 1100 0.98 LGR2G271MELC35 35 × 40 1000 0.94 LGR2W221MELC40 30 × 50 1200 1.08 LGR2G331MELB50 270 35 × 45 1190 1.04 LGR2W271MELC45330 35 × 40 1200 1.08 LGR2G331MELC40 330 35 × 50 1380 1.15 LGR2W331MELC50 390 35 × 45 1300 1.18 LGR2G391MELC45 Rated ripple current (mArms) at 105°C 120Hz 470 35 × 50 1400 1.30 LGR2G471MELC50CAT.8100Z
]15
Similar documents
ALUMINUM ELECTROLYTIC CAPACITORS ES Bi-Polarized, For Audio Equipmentseries Bi-polarized “nichicon MUSE” acoustic series. Suited for audio signal circuits. Compliant to the RoHS directive (2002/95/EC). ES Bi-polarized FW Specifications Item Performance Characteristics Category Temperature Range –40
ALUMINUM ELECTROLYTIC CAPACITORS KX Snap-in Terminal Type, For Audio Equipment,of Switching Power Suppliesseries In order to get high quality sound from 105°C standard series. Materials have been chosen carefully to achieve quality sound. Compliant to the RoHS directive (2002/95/EC). Specifications
ALUMINUM ELECTROLYTIC CAPACITORS CA Miniature Sized, High Ripple Current, Long Lifeseries High ripple current and Long Life product withstanding load life of 12000 hours(10000 hours for φD=10) at +105°C. Suited for ballast application. Compliant to the RoHS directive (2002/95/EC). PB Long Life CA Sm
ALUMINUM ELECTROLYTIC CAPACITORS BX High Temperature Range, For +150°C Useseries Laminated case series. Suited for automobile electronics where heavy duty services are indispensable. Compliant to the RoHS directive (2002/95/EC). BX High Temperature BW Item Performance Characteristics Category Temper
HE Miniature Sized, Low Impedance,High Reliability Approved by Reliability Center for ElectronicComponent, Japan-Certification No. RCJ-03-23Cseries Low impedance and high reliability withstanding 4000 hours to 10000 hours. Compliant to the RoHS directive (2002/95/EC). HE Long Life HD Specifications
ALUMINUM ELECTROLYTIC CAPACITORS HV High Ripple Low Impedance Approved by Reliability Center for ElectronicComponent, Japan-Certification No. RCJ-03-23Cseries Lower impedance at high frequency range. Smaller case size and high ripple current. Compliant to the RoHS directive (2002/95/EC). HD Smaller
ALUMINUM ELECTROLYTIC CAPACITORS MW 5mmL, For General Audio Equipmentseries Acoustic series, with 5mm height. Compliant to the RoHS directive (2002/95/EC). SW Smaller MW Specifications Item Performance Characteristics Category Temperature Range –40 to +85°C Rated Voltage Range 4 to 50V Rated Capacit
ALUMINUM ELECTROLYTIC CAPACITORS Approved by Reliability Center for Electronic HN Ultra Low Impedance, Component, Japan-Certification No. RCJ-03-23CFor PC motherboardseries Lower impedance than HM series. Compliant to the RoHS directive (2002/95/EC). HZ Low LowImpedance HN Impedance HM Specification
KG Lug / Snap-in Terminal Type,For Audio Equipmentseries Disigned for high grade audio equipment, giving priority to high fidelity sound quality. The variation expansion of the KG series. TYPE-1: The low profile high tone quality grade of the new development Super Through electrolyte adoption. TYPE-
ALUMINUM ELECTROLYTIC CAPACITORS HC Low Impedance Approved by Reliability Center for ElectronicComponent, Japan-Certification No. RCJ-03-23Cseries Lower impedance than HD series. Compliant to the RoHS directive (2002/95/EC). Products which are scheduled to be discontinued. Not recommended for new de
ALUMINUM ELECTROLYTIC CAPACITORS GJ Snap-in Terminal Type, 105°C Low-Profile Sizedseries GU Low Profile Withstanding 3000 hours application of rated ripple current at 105°C. Ideally suited for flat design fo switching power supply. GJ Addition of 450V rated voltage. Compliant to the RoHS directive (
ALUMINUM ELECTROLYTIC CAPACITORS CY Miniature Sized, High Ripple Current, High Reliabilityseries High ripple current and Long Life product withstanding CS load life of 8000 to 10000 hours at +105°C. Suited for ballast application. Smaller Compliant to the RoHS directive (2002/95/EC). CY Specificatio
ALUMINUM ELECTROLYTIC CAPACITORS KL Low Leakage Currentseries Standard low leakage current series. Compliant to the RoHS directive (2002/95/EC). VR Low LeakageCurrent KL Specifications Item Performance Characteristics Category Temperature Range –40 to +85°C ( –40 to +105°C product also available upo
PJ Low Impedance, For Switching Power Supplies series Low impedance and high reliability withstanding 5000 hours load life at +105˚C (3000 / 2000 hours for smaller case sizes as specified below). Capacitance ranges available based on the numerical values in E12 series under JIS. Ideally suited for u
ALUMINUM ELECTROLYTIC CAPACITORS GL Snap-in Terminal Type, 105°C Ultra-Smaller-Sizedseries One rank smaller case sized than GG series. Suited for equipment down sizing. GG Compliant to the RoHS directive (2002/95/EC). Smaller GL Specifications Item Performance Characteristics Category Temperature Ra
CapXon HU Series HU Series Snap-in Type 105℃ Features HP Long life HU ◆ Load life 3000 hours 105℃ ◆ ROHS compliant Specifications Item Performance Characteristics Operating Temperature Range -40 to +105℃ -25 to +105℃ Capacitance Range 560 to 47000uF 47 to 2700uF Rate voltage Range 16 to 100VDC 160 t
ALUMINUM ELECTROLYTIC CAPACITORS HM Low Impedance, For PC motherboardseries Lower impedance than HD,HC series. Compliant to the RoHS directive (2002/95/EC). HN Low LowImpedance HM Impedance HD Specifications ltem Performance Characteristics Category Temperature Range –40 to +105˚C Rated Voltage Rang
ALUMINUM ELECTROLYTIC CAPACITORS FG High Grade Standard Type, For Audio Equipmentseries "Fine Gold" MUSE acoustic series suited for high grade audio equipment, using state of the art etching techniques. Rich sound in the bass register and clearer high end, most suited for AV equipment like DVD, MD.
ALUMINUM ELECTROLYTIC CAPACITORS CS Miniature Sized, High Ripple Current, High Reliabilityseries CA High ripple current and Long Life product withstanding load life of 8000 to 10000 hours at +105°C. Smaller Suited for ballast application. Compliant to the RoHS directive (2002/95/EC). CS Smaller CY S
ALUMINUM ELECTROLYTIC CAPACITORS DB.GB Bi-Polarized, For Speaker Networkseries Bi-polarized series. Designed specifically for crossover networks in Hi-Fi sound systems. Compliant to the RoHS directive (2002/95/EC). Specifications Performance Characteristics DB series GB series Radial Lead Type Categ
ALUMINUM ELECTROLYTIC CAPACITORS AK Snap-in Terminal Type, 105°C Permissible Abnormal Voltageseries Withstanding 2000 hours application of rated ripple current at 105°C. Extended voltage range at 200V, 400V and 420V. Improved safety features for abnormally excessive voltage. Ideally suited for the e
GN Snap-in Terminal Type, 105°C Smaller-Sizedseries Withstanding 3000 hours application of rated ripple current at 105°C. One rank smaller case sized than GU series. GU Addition of 500V rated voltage. Smaller Compliant to the RoHS directive (2002/95/EC). GN Smaller Specifications GG Item Performance
ALUMINUM ELECTROLYTIC CAPACITORS MF 5mmL, Low Impedanceseries Low impedance over wide temperature range of –55 to +105°C, with 5mm height. Suited for DC-DC converters where smaller case size and lower impedance are required. Compliant to the RoHS directive (2002/95/EC). MF LowImpedance MT Specificat
ALUMINUM ELECTROLYTIC CAPACITORS GJ Snap-in Terminal Type, 105°C Low-Profile Sized(15mmL)(15) series Withstanding 2000 hours application of rated ripple current at 105°C. Smaller than low-profile GJ series. Ideally suited for flat design of switching power supply. GJ Compliant to the RoHS directive
ALUMINUM ELECTROLYTIC CAPACITORS JB Memory Back-Up Useseries Developed for memory back-up, with load life of 1000 hours at +85°C. Superior to electric double layer type capacitors in the following characteristics:: •Better voltage maintenance. •Speedier charge-up available due to low impedance featu
ALUMINUM ELECTROLYTIC CAPACITORS KZ Premium Grade Type, For Audio Equipment series Premium grade “nichicon MUSE” acoustic series. Ideally suited for first class audio equipment where qualitative and quantitative comfortableness is required. Compliant to the RoHS directive (2002/95/EC). KZ High Grade
ALUMINUM ELECTROLYTIC CAPACITORS KT For General Audio Equipment,Wide Temperature Range.series 105°C standard for audio equipment. Compliant to the RoHS directive (2002/95/EC). KT High Sound Quality VZ Specifications Item Performance Characteristics Category Temperature Range –55 to +105°C Rated Volt
ALUMINUM ELECTROLYTIC CAPACITORS FW Standard, For Audio Equipmentseries Compliant to the RoHS directive (2002/95/EC). KW High Sound Quality FG High Grade FW Specifications Item Performance Characteristics Category Temperature Range –40 to +85°C Rated Voltage Range 6.3 to 100V Rated Capacitance Range
CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS LV Radial Lead Type, Long Life Assuranceseries High voltage (to 63V), Low ESR, High ripple current. Long life of 3000 hours at 105°C. Radial lead type: Lead free flow soldering condition correspondence. Compliant to the RoHS directive (2002/9
CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS LF Radial Lead Type, Standardseries Ultra-low ESR, High ripple current. Load life of 2000 hours at 105°C. LG Radial lead type : LV Lead free flow soldering condition correspondence. High Higher Compliant to the RoHS directive (2002/95/EC). Vo