Download: ALUMINUM ELECTROLYTIC CAPACITORS KX Snap-in Terminal Type, For Audio Equipment,of Switching Power Suppliesseries
ALUMINUM ELECTROLYTIC CAPACITORS KX Snap-in Terminal Type, For Audio Equipment,of Switching Power Suppliesseries In order to get high quality sound from 105°C standard series. Materials have been chosen carefully to achieve quality sound. Compliant to the RoHS directive (2002/95/EC). Specifications Item Performance Characteristics Category Temperature Range – 40 to +105°C (200 • 250V), – 25 to + 105°C (400 • 450V) Rated Voltage Range 200 to 450V Rated Capacitance Range 56 to 2200µF Capacitance Tolerance ±20% at 120Hz, 20°C Leakage Current After 5 minutes' application of rated voltage, leakage ...
Author:
Richardson Shared: 8/19/19
Downloads: 842 Views: 1735
Content
ALUMINUM ELECTROLYTIC CAPACITORS KX Snap-in Terminal Type, For Audio Equipment,of Switching Power Suppliesseries
In order to get high quality sound from 105°C standard series. Materials have been chosen carefully to achieve quality sound. Compliant to the RoHS directive (2002/95/EC).Specifications
Item Performance Characteristics Category Temperature Range – 40 to +105°C (200 • 250V), – 25 to + 105°C (400 • 450V) Rated Voltage Range 200 to 450V Rated Capacitance Range 56 to 2200µF Capacitance Tolerance ±20% at 120Hz, 20°C Leakage Current After 5 minutes' application of rated voltage, leakage current is not more than 3 CV (µA), [C : Rated Capacitance(µF), V : Voltage ( V ) ] Rated voltage(V) 200 to 400 450 Measurement frequency : 120Hz, Temperature : 20°C Tangent of loss angle (tan δ) tan δ (MAX.) 0.15 0.20 Rated voltage(V) 200 to 250 400 to 450 Measurement frequency : 120Hz Stability at Low Temperature Impedance ratio Z – 25°C/Z+20°C48ZT/Z20(MAX.) Z – 40°C/Z+20°C 12 — The specifications listed at right shall be met when the Capacitance change Within ±20% of the initial capacitance value Endurance capacitors are restored to 20°C after the rated voltage is tan δ 200% or less than the initial specified value applied for 2000 hours at 105°C. Leakage current Less than or equal to the initial specified value After storing the capacitors under no load at 105°C for 1000 Capacitance change Within ±15% of the initial capacitance value hours and then performing voltage treatment based on JIS C Shelf Life tan δ 150% or less than the initial specified value 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed at right. Leakage current Less than or equal to the initial specified value Marking Printed with gold color letter on black sleeve.Drawing Type numbering system (Example : 400 V 120µF , Dia.φ25)
Polarity bar12345678910 11 12 13 14 Sleeve (P.E.T.) LKX2G121MESA25Case length code Case dia.code Configuration φD Code 20 Y Capacitance tolerance (±20%) 22Z1Rated capacitance (120µF) 25A030 B L±2 Rated voltage (400V) 35 C 6.3±1 Pressure relief vent Series name Type 0.8+0.210 ± -0.1 0 .2+ 0.1 0.8 -0 .1 2-2φ±0.1 1.5+0.2 -0.1 (PC board hole dimensions) (Terminal dimensions)Frequency coefficient of rated ripple current
Frequency (Hz) 50 60 120 300 1k 10k 50k or more 200 to 250V 0.81 0.85 1.00 1.17 1.32 1.45 1.50 Coeff. 400 to 450V 0.77 0.82 1.00 1.16 1.30 1.41 1.43 Dimension table in next page.CAT.8100Z
φ D +1 MAX. 6.3±1 3.5,ALUMINUM ELECTROLYTIC CAPACITORS KX series Dimensions
200V (2D) 250V (2E) Cap. Size Rated ripple Cap. Size Rated ripple (µF) φD × L(mm) (Arms) tan δ Code φD × L(mm) (Arms) tan δ Code(µF) 220 20 × 25 0.90 0.15 LKX2D221MESY25 180 20 × 25 0.90 0.15 LKX2E181MESY25 20 × 30 0.99 0.15 LKX2D271MESY30 20 × 30 1.00 0.15 LKX2E221MESY30 270 220 22 × 25 0.99 0.15 LKX2D271MESZ25 22 × 25 1.00 0.15 LKX2E221MESZ25 330 20 × 35 1.20 0.15 LKX2D331MESY35 20 × 35 1.10 0.15 LKX2E271MESY35 20 × 40 1.31 0.15 LKX2D391MESY40 22 × 30 1.10 0.15 LKX2E271MESZ30 390 22 × 30 1.31 0.15 LKX2D391MESZ30 20 × 40 1.20 0.15 LKX2E331MESY40 25 × 25 1.31 0.15 LKX2D391MESA25 330 22 × 35 1.20 0.15 LKX2E331MESZ35 20 × 45 1.48 0.15 LKX2D471MESY45 25 × 25 1.20 0.15 LKX2E331MESA25 470 22 × 35 1.48 0.15 LKX2D471MESZ35 20 × 45 1.30 0.15 LKX2E391MESY45 25 × 30 1.48 0.15 LKX2D471MESA30 390 22 × 40 1.30 0.15 LKX2E391MESZ40 20 × 50 1.60 0.15 LKX2D561MESY50 25 × 30 1.30 0.15 LKX2E391MESA30 560 22 × 40 1.60 0.15 LKX2D561MESZ40 20 × 50 1.40 0.15 LKX2E471MESY50 25 × 35 1.60 0.15 LKX2D561MESA35 22 × 45 1.40 0.15 LKX2E471MESZ45 × 47022 45 1.75 0.15 LKX2D681MESZ45 25 × 35 1.40 0.15 LKX2E471MESA35 25 × 40 1.75 0.15 LKX2D681MESA40 30 × 25 1.40 0.15 LKX2E471MESB25 30 × 30 1.75 0.15 LKX2D681MESB30 22 × 50 1.50 0.15 LKX2E561MESZ50 35 × 25 1.75 0.15 LKX2D681MESC25 25 × 40 1.50 0.15 LKX2E561MESA40 × 56025 45 2.04 0.15 LKX2D821MESA45 30 × 30 1.50 0.15 LKX2E561MESB30 30 × 35 2.04 0.15 LKX2D821MESB35 35 × 25 1.50 0.15 LKX2E561MESC25 25 × 50 2.30 0.15 LKX2D102MESA50 25 × 50 1.70 0.15 LKX2E681MESA50 × 6801000 30 40 2.30 0.15 LKX2D102MESB40 30 × 35 1.70 0.15 LKX2E681MESB35 35 × 30 2.30 0.15 LKX2D102MESC30 30 × 40 2.00 0.15 LKX2E821MESB40 30 × 45 2.65 0.15 LKX2D122MESB45 35 × 30 2.00 0.15 LKX2E821MESC30 35 × 35 2.65 0.15 LKX2D122MESC35 30 × 45 2.20 0.15 LKX2E102MESB45 × 100030 50 2.80 0.15 LKX2D152MESB50 35 × 35 2.20 0.15 LKX2E102MESC35 35 × 40 2.80 0.15 LKX2D152MESC40 1200 35 × 40 2.30 0.15 LKX2E122MESC40 1800 35 × 45 3.08 0.15 LKX2D182MESC45 1500 35 × 50 2.50 0.15 LKX2E152MESC50 2200 35 × 50 3.48 0.15 LKX2D222MESC50 400V (2G) 450V (2W) Cap. Size Rated ripple Cap. Size Rated ripple φD × L(mm) (Arms) tan δ Code φD × L(mm) (Arms) tan δ Code(µF) (µF) 68 20 × 25 0.49 0.15 LKX2G680MESY25 56 20 × 25 0.44 0.20 LKX2W560MESY25 20 × 30 0.64 0.15 LKX2G820MESY30 68 20 × 30 0.50 0.20 LKX2W680MESY30 22 × 25 0.64 0.15 LKX2G820MESZ25 20 × 35 0.64 0.20 LKX2W820MESY35 100 20 × 35 0.68 0.15 LKX2G101MESY35 22 × 30 0.64 0.20 LKX2W820MESZ30 20 × 35 0.73 0.15 LKX2G121MESY35 20 × 40 0.69 0.20 LKX2W101MESY40 120 22 × 30 0.73 0.15 LKX2G121MESZ30 100 22 × 30 0.69 0.20 LKX2W101MESZ30 25 × 25 0.73 0.15 LKX2G121MESA25 25 × 25 0.69 0.20 LKX2W101MESA25 20 × 45 0.85 0.15 LKX2G151MESY45 20 × 45 0.72 0.20 LKX2W121MESY45 150 22 × 35 0.85 0.15 LKX2G151MESZ35 120 22 × 35 0.72 0.20 LKX2W121MESZ35 25 × 30 0.85 0.15 LKX2G151MESA30 25 × 30 0.72 0.20 LKX2W121MESA30 20 × 50 0.95 0.15 LKX2G181MESY50 22 × 45 0.79 0.20 LKX2W151MESZ45 180 22 × 40 0.95 0.15 LKX2G181MESZ40 150 25 × 35 0.79 0.20 LKX2W151MESA35 25 × 35 0.95 0.15 LKX2G181MESA35 30 × 25 0.79 0.20 LKX2W151MESB25 22 × 50 1.10 0.15 LKX2G221MESZ50 22 × 50 0.87 0.20 LKX2W181MESZ50 25 × 40 1.10 0.15 LKX2G221MESA40 25 × 40 0.87 0.20 LKX2W181MESA40 30 × 18030 1.10 0.15 LKX2G221MESB30 30 × 30 0.87 0.20 LKX2W181MESB30 35 × 25 1.10 0.15 LKX2G221MESC25 35 × 25 0.87 0.20 LKX2W181MESC25 25 × 45 1.22 0.15 LKX2G271MESA45 25 × 45 1.05 0.20 LKX2W221MESA45 270 220 30 × 35 1.22 0.15 LKX2G271MESB35 30 × 35 1.05 0.20 LKX2W221MESB35 25 × 50 1.44 0.15 LKX2G331MESA50 30 × 40 1.23 0.20 LKX2W271MESB40 330 30 × 27040 1.44 0.15 LKX2G331MESB40 35 × 30 1.23 0.20 LKX2W271MESC30 35 × 30 1.44 0.15 LKX2G331MESC30 30 × 45 1.38 0.20 LKX2W331MESB45 × 33030 45 1.55 0.15 LKX2G391MESB45 35 × 35 1.38 0.20 LKX2W331MESC35 35 × 35 1.55 0.15 LKX2G391MESC35 390 35 × 40 1.61 0.20 LKX2W391MESC40 30 × 50 1.68 0.15 LKX2G471MESB50 470 35 × 45 1.78 0.20 LKX2W471MESC45 35 × 40 1.68 0.15 LKX2G471MESC40 560 35 × 50 1.99 0.20 LKX2W561MESC50 560 35 × 45 1.90 0.15 LKX2G561MESC45 Rated ripple current (Arms) at 105°C 120Hz 680 35 × 50 2.12 0.15 LKX2G681MESC50 CAT.8100Z]15
Similar documents
ALUMINUM ELECTROLYTIC CAPACITORS CA Miniature Sized, High Ripple Current, Long Lifeseries High ripple current and Long Life product withstanding load life of 12000 hours(10000 hours for φD=10) at +105°C. Suited for ballast application. Compliant to the RoHS directive (2002/95/EC). PB Long Life CA Sm
ALUMINUM ELECTROLYTIC CAPACITORS BX High Temperature Range, For +150°C Useseries Laminated case series. Suited for automobile electronics where heavy duty services are indispensable. Compliant to the RoHS directive (2002/95/EC). BX High Temperature BW Item Performance Characteristics Category Temper
HE Miniature Sized, Low Impedance,High Reliability Approved by Reliability Center for ElectronicComponent, Japan-Certification No. RCJ-03-23Cseries Low impedance and high reliability withstanding 4000 hours to 10000 hours. Compliant to the RoHS directive (2002/95/EC). HE Long Life HD Specifications
ALUMINUM ELECTROLYTIC CAPACITORS HV High Ripple Low Impedance Approved by Reliability Center for ElectronicComponent, Japan-Certification No. RCJ-03-23Cseries Lower impedance at high frequency range. Smaller case size and high ripple current. Compliant to the RoHS directive (2002/95/EC). HD Smaller
ALUMINUM ELECTROLYTIC CAPACITORS MW 5mmL, For General Audio Equipmentseries Acoustic series, with 5mm height. Compliant to the RoHS directive (2002/95/EC). SW Smaller MW Specifications Item Performance Characteristics Category Temperature Range –40 to +85°C Rated Voltage Range 4 to 50V Rated Capacit
ALUMINUM ELECTROLYTIC CAPACITORS Approved by Reliability Center for Electronic HN Ultra Low Impedance, Component, Japan-Certification No. RCJ-03-23CFor PC motherboardseries Lower impedance than HM series. Compliant to the RoHS directive (2002/95/EC). HZ Low LowImpedance HN Impedance HM Specification
KG Lug / Snap-in Terminal Type,For Audio Equipmentseries Disigned for high grade audio equipment, giving priority to high fidelity sound quality. The variation expansion of the KG series. TYPE-1: The low profile high tone quality grade of the new development Super Through electrolyte adoption. TYPE-
ALUMINUM ELECTROLYTIC CAPACITORS HC Low Impedance Approved by Reliability Center for ElectronicComponent, Japan-Certification No. RCJ-03-23Cseries Lower impedance than HD series. Compliant to the RoHS directive (2002/95/EC). Products which are scheduled to be discontinued. Not recommended for new de
ALUMINUM ELECTROLYTIC CAPACITORS GJ Snap-in Terminal Type, 105°C Low-Profile Sizedseries GU Low Profile Withstanding 3000 hours application of rated ripple current at 105°C. Ideally suited for flat design fo switching power supply. GJ Addition of 450V rated voltage. Compliant to the RoHS directive (
ALUMINUM ELECTROLYTIC CAPACITORS CY Miniature Sized, High Ripple Current, High Reliabilityseries High ripple current and Long Life product withstanding CS load life of 8000 to 10000 hours at +105°C. Suited for ballast application. Smaller Compliant to the RoHS directive (2002/95/EC). CY Specificatio
ALUMINUM ELECTROLYTIC CAPACITORS KL Low Leakage Currentseries Standard low leakage current series. Compliant to the RoHS directive (2002/95/EC). VR Low LeakageCurrent KL Specifications Item Performance Characteristics Category Temperature Range –40 to +85°C ( –40 to +105°C product also available upo
PJ Low Impedance, For Switching Power Supplies series Low impedance and high reliability withstanding 5000 hours load life at +105˚C (3000 / 2000 hours for smaller case sizes as specified below). Capacitance ranges available based on the numerical values in E12 series under JIS. Ideally suited for u
ALUMINUM ELECTROLYTIC CAPACITORS GL Snap-in Terminal Type, 105°C Ultra-Smaller-Sizedseries One rank smaller case sized than GG series. Suited for equipment down sizing. GG Compliant to the RoHS directive (2002/95/EC). Smaller GL Specifications Item Performance Characteristics Category Temperature Ra
CapXon HU Series HU Series Snap-in Type 105℃ Features HP Long life HU ◆ Load life 3000 hours 105℃ ◆ ROHS compliant Specifications Item Performance Characteristics Operating Temperature Range -40 to +105℃ -25 to +105℃ Capacitance Range 560 to 47000uF 47 to 2700uF Rate voltage Range 16 to 100VDC 160 t
ALUMINUM ELECTROLYTIC CAPACITORS HM Low Impedance, For PC motherboardseries Lower impedance than HD,HC series. Compliant to the RoHS directive (2002/95/EC). HN Low LowImpedance HM Impedance HD Specifications ltem Performance Characteristics Category Temperature Range –40 to +105˚C Rated Voltage Rang
ALUMINUM ELECTROLYTIC CAPACITORS FG High Grade Standard Type, For Audio Equipmentseries "Fine Gold" MUSE acoustic series suited for high grade audio equipment, using state of the art etching techniques. Rich sound in the bass register and clearer high end, most suited for AV equipment like DVD, MD.
ALUMINUM ELECTROLYTIC CAPACITORS CS Miniature Sized, High Ripple Current, High Reliabilityseries CA High ripple current and Long Life product withstanding load life of 8000 to 10000 hours at +105°C. Smaller Suited for ballast application. Compliant to the RoHS directive (2002/95/EC). CS Smaller CY S
ALUMINUM ELECTROLYTIC CAPACITORS DB.GB Bi-Polarized, For Speaker Networkseries Bi-polarized series. Designed specifically for crossover networks in Hi-Fi sound systems. Compliant to the RoHS directive (2002/95/EC). Specifications Performance Characteristics DB series GB series Radial Lead Type Categ
ALUMINUM ELECTROLYTIC CAPACITORS AK Snap-in Terminal Type, 105°C Permissible Abnormal Voltageseries Withstanding 2000 hours application of rated ripple current at 105°C. Extended voltage range at 200V, 400V and 420V. Improved safety features for abnormally excessive voltage. Ideally suited for the e
GN Snap-in Terminal Type, 105°C Smaller-Sizedseries Withstanding 3000 hours application of rated ripple current at 105°C. One rank smaller case sized than GU series. GU Addition of 500V rated voltage. Smaller Compliant to the RoHS directive (2002/95/EC). GN Smaller Specifications GG Item Performance
ALUMINUM ELECTROLYTIC CAPACITORS MF 5mmL, Low Impedanceseries Low impedance over wide temperature range of –55 to +105°C, with 5mm height. Suited for DC-DC converters where smaller case size and lower impedance are required. Compliant to the RoHS directive (2002/95/EC). MF LowImpedance MT Specificat
ALUMINUM ELECTROLYTIC CAPACITORS GJ Snap-in Terminal Type, 105°C Low-Profile Sized(15mmL)(15) series Withstanding 2000 hours application of rated ripple current at 105°C. Smaller than low-profile GJ series. Ideally suited for flat design of switching power supply. GJ Compliant to the RoHS directive
ALUMINUM ELECTROLYTIC CAPACITORS JB Memory Back-Up Useseries Developed for memory back-up, with load life of 1000 hours at +85°C. Superior to electric double layer type capacitors in the following characteristics:: •Better voltage maintenance. •Speedier charge-up available due to low impedance featu
ALUMINUM ELECTROLYTIC CAPACITORS KZ Premium Grade Type, For Audio Equipment series Premium grade “nichicon MUSE” acoustic series. Ideally suited for first class audio equipment where qualitative and quantitative comfortableness is required. Compliant to the RoHS directive (2002/95/EC). KZ High Grade
ALUMINUM ELECTROLYTIC CAPACITORS KT For General Audio Equipment,Wide Temperature Range.series 105°C standard for audio equipment. Compliant to the RoHS directive (2002/95/EC). KT High Sound Quality VZ Specifications Item Performance Characteristics Category Temperature Range –55 to +105°C Rated Volt
ALUMINUM ELECTROLYTIC CAPACITORS FW Standard, For Audio Equipmentseries Compliant to the RoHS directive (2002/95/EC). KW High Sound Quality FG High Grade FW Specifications Item Performance Characteristics Category Temperature Range –40 to +85°C Rated Voltage Range 6.3 to 100V Rated Capacitance Range
CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS LV Radial Lead Type, Long Life Assuranceseries High voltage (to 63V), Low ESR, High ripple current. Long life of 3000 hours at 105°C. Radial lead type: Lead free flow soldering condition correspondence. Compliant to the RoHS directive (2002/9
CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS LF Radial Lead Type, Standardseries Ultra-low ESR, High ripple current. Load life of 2000 hours at 105°C. LG Radial lead type : LV Lead free flow soldering condition correspondence. High Higher Compliant to the RoHS directive (2002/95/EC). Vo
CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS LE Radial Lead Type, Ultra-low ESRseries Ultra-low ESR, High ripple current. Load life of 2000 hours at 105°C. Radial lead type : Lead free flow soldering condition correspondence Compliant to the RoHS directive (2002/95/EC). LF Low ESR LE Sp
CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS CVChip Type, High Voltage / Long Lifeseries High voltage (to 63V), Low ESR, High ripple current. Load life of 3000 hours at 105°C. SMD type : Lead free reflow soldering condition at 260°C peak correspondence. Compliant to the RoHS directive (