Download: HV High Ripple Low Impedance Approved by Reliability Center for ElectronicComponent, Japan-Certification No. RCJ-03-23Cseries HV

ALUMINUM ELECTROLYTIC CAPACITORS HV High Ripple Low Impedance Approved by Reliability Center for ElectronicComponent, Japan-Certification No. RCJ-03-23Cseries Lower impedance at high frequency range. Smaller case size and high ripple current. Compliant to the RoHS directive (2002/95/EC). HD Smaller HV Specifications ltem Performance Characteristics Category Temperature Range –40 to +105˚C Rated Voltage Range 6.3 to 35V Rated Capacitance Range 47 to 8200µF Capacitance Tolerance ±20% at 120Hz, 20˚C Leakage Current After 2 minutes' application of rated voltage, leakage current is not more than 0....
Author: Richardson Shared: 8/19/19
Downloads: 1132 Views: 4051

Content

ALUMINUM ELECTROLYTIC CAPACITORS HV High Ripple Low Impedance Approved by Reliability Center for ElectronicComponent, Japan-Certification No. RCJ-03-23Cseries

Lower impedance at high frequency range. Smaller case size and high ripple current. Compliant to the RoHS directive (2002/95/EC).

HD

Smaller

HV Specifications

ltem Performance Characteristics Category Temperature Range –40 to +105˚C Rated Voltage Range 6.3 to 35V Rated Capacitance Range 47 to 8200µF Capacitance Tolerance ±20% at 120Hz, 20˚C Leakage Current After 2 minutes' application of rated voltage, leakage current is not more than 0.01CV or 3 (µA), whichever is greater. Rated voltage (V) 6.3 10 16 25 35 120Hz 20˚C Tangent of loss angle (tan δ) tan δ (MAX.) 0.21 0.18 0.15 0.13 0.11 For capacitance of more than 1000µF, add 0.02 for every increase of 1000µF. Rated voltage (V) 6.3 10 16 25 35 120Hz Stability at Low Temperature Impedance ratio Z–25˚C / Z+20˚C22222ZT / Z20 (MAX.) Z–40˚C / Z+20˚C33333The specifications listed at right shall be met when the capacitors are restored to 20˚C after D.C. bias plus Capacitance change Within ± 25% of the initial capacitance value (6.3V 10V : ±30%) Endurance rated ripple current is applied for 6000 hours (5000 tan δ 200% or less than the initial specified value hours for φD=5 and 6.3) at 105˚C, the peak voltage Leakage current Less than or equal to the initial specified value shall not exceed the rated voltage. Marking Printed with white color letter on black sleeve.

Radial Lead Type Type numbering system (Example : 25V 150µF)

Sleeve (P.E.T.) φd12345678910 11 12

UHV1E151MED

Size code Configuration Capacitance tolerance (± 20%) Rated capacitance (150µF) Pressure relief vent Rated voltage (25V)L+ MAX. 15MIN 4MIN (φ6.3up) Series name Type (mm) Configuration φD 5 6.3 8 10 12.5 16φDPb-free leadwire(L < 20) 1.5 Pb-free PET sleeve P 2.0 2.5 3.5 5.0 5.0 7.5 (L 20) 2.0 5 DD φd 0.5 0.5 0.6 0.6 0.6 0.8 6.3 ED In case L > 25 for the φ12.5 dia. unit, lead dia. φ d = 0.8mm. 8 · 10 PD 12.5 · 16 HD • Please refer to page 20 about the end seal configulation. Please refer to page 20, 21, 22 about the formed or taped product spec. Please refer to page 4 for the minimum order quantity. Dimension table in next page.

CAT.8100Z

φD+0.5 MAX. P±0.5,

ALUMINUM ELECTROLYTIC CAPACITORS HVseries Standard Ratings

V (Code) 6.3 (0J) 10 (1A) 16 (1C) Case size Impedance (Ω) MAX. Rated ripple Case size Impedance (Ω) MAX. Rated ripple Case size Impedance (Ω) MAX. Rated ripple ItemφD× L (mArms) φ D × L (mArms) φ D × L (mArms) Cap.(µF) Code (mm) 20˚C / 100kHz –10˚C / 100kHz 105˚C / 100kHz (mm) 20˚C / 100kHz –10˚C / 100kHz 105˚C / 100kHz (mm) 20˚C / 100kHz –10˚C / 100kHz 105˚C / 100kHz 100 101 5 × 11 0.23 0.76 360 150 151 5 × 11 0.23 0.76 360 6.3 × 11 0.10 0.33 450 220 221 5 × 11 0.23 0.76 360 6.3 × 11 0.10 0.33 450 6.3 × 11 0.10 0.33 550 330 331 6.3 × 11 0.10 0.33 460 6.3 × 11 0.10 0.33 550 8 × 11.5 0.059 0.181 830 470 471 6.3 × 11 0.10 0.33 550 8 × 11.5 0.059 0.181 820 8 × 11.5 0.059 0.181 990 10 × 12.5 0.043 0.133 1360 680 681 8 × 11.5 0.059 0.181 900 8 × 11.5 0.059 0.181 990 8 × 15 0.046 0.143 1330 820 821 8 × 11.5 0.059 0.181 990 10 × 12.5 0.043 0.133 1250 10 × 16 0.030 0.095 1650 × 10 × 12.5 0.043 0.133 1360 10 × 16 0.030 0.095 18151000 102 10 12.5 0.043 0.133 1250 8 × 15 0.046 0.143 1330 8 × 20 0.031 0.105 1550 10 × 12.5 0.043 0.133 1360 1200 122 10 × 16 0.030 0.095 1650 10 × 20 0.019 0.057 1930 8 × 15 0.046 0.143 1330 × 10 × 16 0.030 0.095 18151500 152 8 20 0.031 0.105 1550 10 × 20 0.019 0.057 2160 8 × 20 0.031 0.105 1550 1800 182 10 × 16 0.030 0.095 1815 10 × 20 0.019 0.057 2160 10 × 25 0.017 0.051 2475 2200 222 10 × 20 0.019 0.057 2160 10 × 25 0.017 0.051 2475 12.5 × 20 0.016 0.041 2725 2700 272 10 × 25 0.017 0.051 2475 12.5 × 20 0.016 0.041 2475 12.5 × 25 0.014 0.036 3190 × × 12.5 × 31.5 0.012 0.031 37953300 332 12.5 20 0.016 0.041 2500 12.5 20 0.016 0.041 2725 16 × 20 0.014 0.036 3575 3900 392 12.5 × 20 0.016 0.041 2725 12.5 × 25 0.014 0.036 3190 12.5 × 35.5 0.011 0.029 3925 × 12.5 × 31.5 0.012 0.031 37954700 472 12.5 25 0.014 0.036 3190 16 × 25 0.012 0.033 3990 16 × 20 0.014 0.036 3575 5600 562 12.5 × 31.5 0.012 0.031 3795 12.5 × 35.5 0.011 0.029 3925 12.5 × 35.5 0.011 0.029 3925 6800 682 16 × 25 0.012 0.033 3990 16 × 20 0.014 0.036 3575 8200 822 16 × 25 0.012 0.033 3990 V (Code) 25 (1E) 35 (1V) Case size Impedance (Ω) MAX. Rated ripple Case size Impedance (Ω) MAX. Rated ripple : In this case, 6 will be put at 12th digit of ItemφD× L (mArms) φ D × L (mArms) type numbering system. Cap.(µF) Code (mm) 20˚C / 100kHz –10˚C / 100kHz 105˚C / 100kHz (mm) 20˚C / 100kHz –10˚C / 100kHz 105˚C / 100kHz 47 470 5 × 11 0.23 0.76 360 68 680 5 × 11 0.23 0.76 360 6.3 × 11 0.10 0.33 450 100 101 6.3 × 11 0.10 0.33 450 6.3 × 11 0.10 0.33 550 150 151 6.3 × 11 0.10 0.33 550 8 × 11.5 0.059 0.181 820 220 221 8 × 11.5 0.059 0.181 810 8 × 11.5 0.059 0.181 990 270 271 8 × 11.5 0.059 0.181 900 8 × 15 0.046 0.143 1330 330 331 8 × 11.5 0.059 0.181 990 10 × 12.5 0.043 0.133 1360 390 391 8 × 15 0.046 0.143 1330 8 × 20 0.031 0.105 1550 470 471 10 × 12.5 0.043 0.133 1360 10 × 16 0.030 0.095 1815 560 561 8 × 20 0.031 0.105 1550 10 × 20 0.019 0.057 2160 680 681 10 × 16 0.030 0.095 1815 10 × 25 0.017 0.051 2475 820 821 10 × 20 0.019 0.057 2160 12.5 × 20 0.016 0.041 2725 1000 102 10 × 25 0.017 0.051 2475 12.5 × 20 0.016 0.041 2920 1200 122 12.5 × 20 0.016 0.041 2475 12.5 × 25 0.014 0.036 3190 × 12.5 × 31.5 0.012 0.031 37951500 152 12.5 20 0.016 0.041 2725 16 × 20 0.014 0.036 3575 1800 182 12.5 × 25 0.014 0.036 3190 12.5 × 35.5 0.011 0.029 3925 12.5 × 31.5 0.012 0.031 3795 2200 222 16 × 25 0.012 0.033 3990 16 × 20 0.014 0.036 3575 2700 272 12.5 × 35.5 0.011 0.029 3925 3300 332 16 × 25 0.012 0.033 3990

Frequency coefficient of rated ripple current

Frequency Cap.(µF) 120Hz 1kHz 10kHz 100kHz 47 to 150 0.40 0.75 0.90 1.00 220 to 560 0.50 0.85 0.94 1.00 680 to 1800 0.60 0.87 0.95 1.00 2200 to 3900 0.75 0.90 0.95 1.00 4700 to 8200 0.85 0.95 0.98 1.00 CAT.8100Z]
15

Similar documents

MW 5mmL, For General Audio Equipmentseries MW
ALUMINUM ELECTROLYTIC CAPACITORS MW 5mmL, For General Audio Equipmentseries Acoustic series, with 5mm height. Compliant to the RoHS directive (2002/95/EC). SW Smaller MW Specifications Item Performance Characteristics Category Temperature Range –40 to +85°C Rated Voltage Range 4 to 50V Rated Capacit
ALUMINUM ELECTROLYTIC CAPACITORS HN Ultra Low Impedance, Component, Japan-Certification No. RCJ-03-23CFor PC motherboardseries
ALUMINUM ELECTROLYTIC CAPACITORS Approved by Reliability Center for Electronic HN Ultra Low Impedance, Component, Japan-Certification No. RCJ-03-23CFor PC motherboardseries Lower impedance than HM series. Compliant to the RoHS directive (2002/95/EC). HZ Low LowImpedance HN Impedance HM Specification
KG Lug / Snap-in Terminal Type,For Audio Equipmentseries
KG Lug / Snap-in Terminal Type,For Audio Equipmentseries Disigned for high grade audio equipment, giving priority to high fidelity sound quality. The variation expansion of the KG series. TYPE-1: The low profile high tone quality grade of the new development Super Through electrolyte adoption. TYPE-
HC Low Impedance Approved by Reliability Center for ElectronicComponent, Japan-Certification No. RCJ-03-23Cseries
ALUMINUM ELECTROLYTIC CAPACITORS HC Low Impedance Approved by Reliability Center for ElectronicComponent, Japan-Certification No. RCJ-03-23Cseries Lower impedance than HD series. Compliant to the RoHS directive (2002/95/EC). Products which are scheduled to be discontinued. Not recommended for new de
GJ Snap-in Terminal Type, 105°C Low-Profile Sizedseries GU
ALUMINUM ELECTROLYTIC CAPACITORS GJ Snap-in Terminal Type, 105°C Low-Profile Sizedseries GU Low Profile Withstanding 3000 hours application of rated ripple current at 105°C. Ideally suited for flat design fo switching power supply. GJ Addition of 450V rated voltage. Compliant to the RoHS directive (
CY Miniature Sized, High Ripple Current, High Reliabilityseries CY
ALUMINUM ELECTROLYTIC CAPACITORS CY Miniature Sized, High Ripple Current, High Reliabilityseries High ripple current and Long Life product withstanding CS load life of 8000 to 10000 hours at +105°C. Suited for ballast application. Smaller Compliant to the RoHS directive (2002/95/EC). CY Specificatio
ALUMINUM ELECTROLYTIC CAPACITORS KL Low Leakage Currentseries
ALUMINUM ELECTROLYTIC CAPACITORS KL Low Leakage Currentseries Standard low leakage current series. Compliant to the RoHS directive (2002/95/EC). VR Low LeakageCurrent KL Specifications Item Performance Characteristics Category Temperature Range –40 to +85°C ( –40 to +105°C product also available upo
PJ Low Impedance, For Switching Power Supplies series
PJ Low Impedance, For Switching Power Supplies series Low impedance and high reliability withstanding 5000 hours load life at +105˚C (3000 / 2000 hours for smaller case sizes as specified below). Capacitance ranges available based on the numerical values in E12 series under JIS. Ideally suited for u
GL Snap-in Terminal Type, 105°C Ultra-Smaller-Sizedseries GL
ALUMINUM ELECTROLYTIC CAPACITORS GL Snap-in Terminal Type, 105°C Ultra-Smaller-Sizedseries One rank smaller case sized than GG series. Suited for equipment down sizing. GG Compliant to the RoHS directive (2002/95/EC). Smaller GL Specifications Item Performance Characteristics Category Temperature Ra
HU Series Snap-in Type 105℃
CapXon HU Series HU Series Snap-in Type 105℃ Features HP Long life HU ◆ Load life 3000 hours 105℃ ◆ ROHS compliant Specifications Item Performance Characteristics Operating Temperature Range -40 to +105℃ -25 to +105℃ Capacitance Range 560 to 47000uF 47 to 2700uF Rate voltage Range 16 to 100VDC 160 t
ALUMINUM ELECTROLYTIC CAPACITORS HM Low Impedance, For PC motherboardseries
ALUMINUM ELECTROLYTIC CAPACITORS HM Low Impedance, For PC motherboardseries Lower impedance than HD,HC series. Compliant to the RoHS directive (2002/95/EC). HN Low LowImpedance HM Impedance HD Specifications ltem Performance Characteristics Category Temperature Range –40 to +105˚C Rated Voltage Rang
ALUMINUM ELECTROLYTIC CAPACITORS FG High Grade Standard Type, For Audio Equipmentseries
ALUMINUM ELECTROLYTIC CAPACITORS FG High Grade Standard Type, For Audio Equipmentseries "Fine Gold" MUSE acoustic series suited for high grade audio equipment, using state of the art etching techniques. Rich sound in the bass register and clearer high end, most suited for AV equipment like DVD, MD.
CS Miniature Sized, High Ripple Current, High Reliabilityseries
ALUMINUM ELECTROLYTIC CAPACITORS CS Miniature Sized, High Ripple Current, High Reliabilityseries CA High ripple current and Long Life product withstanding load life of 8000 to 10000 hours at +105°C. Smaller Suited for ballast application. Compliant to the RoHS directive (2002/95/EC). CS Smaller CY S
DB.GB Bi-Polarized, For Speaker Networkseries
ALUMINUM ELECTROLYTIC CAPACITORS DB.GB Bi-Polarized, For Speaker Networkseries Bi-polarized series. Designed specifically for crossover networks in Hi-Fi sound systems. Compliant to the RoHS directive (2002/95/EC). Specifications Performance Characteristics DB series GB series Radial Lead Type Categ
ALUMINUM ELECTROLYTIC CAPACITORS AK Snap-in Terminal Type, 105°C Permissible Abnormal Voltageseries
ALUMINUM ELECTROLYTIC CAPACITORS AK Snap-in Terminal Type, 105°C Permissible Abnormal Voltageseries Withstanding 2000 hours application of rated ripple current at 105°C. Extended voltage range at 200V, 400V and 420V. Improved safety features for abnormally excessive voltage. Ideally suited for the e
GN Snap-in Terminal Type, 105°C Smaller-Sizedseries GN
GN Snap-in Terminal Type, 105°C Smaller-Sizedseries Withstanding 3000 hours application of rated ripple current at 105°C. One rank smaller case sized than GU series. GU Addition of 500V rated voltage. Smaller Compliant to the RoHS directive (2002/95/EC). GN Smaller Specifications GG Item Performance
MF 5mmL, Low Impedanceseries MF LowImpedance MT
ALUMINUM ELECTROLYTIC CAPACITORS MF 5mmL, Low Impedanceseries Low impedance over wide temperature range of –55 to +105°C, with 5mm height. Suited for DC-DC converters where smaller case size and lower impedance are required. Compliant to the RoHS directive (2002/95/EC). MF LowImpedance MT Specificat
GJ Snap-in Terminal Type, 105°C Low-Profile Sized(15mmL)(15) series
ALUMINUM ELECTROLYTIC CAPACITORS GJ Snap-in Terminal Type, 105°C Low-Profile Sized(15mmL)(15) series Withstanding 2000 hours application of rated ripple current at 105°C. Smaller than low-profile GJ series. Ideally suited for flat design of switching power supply. GJ Compliant to the RoHS directive
ALUMINUM ELECTROLYTIC CAPACITORS JB Memory Back-Up Useseries
ALUMINUM ELECTROLYTIC CAPACITORS JB Memory Back-Up Useseries Developed for memory back-up, with load life of 1000 hours at +85°C. Superior to electric double layer type capacitors in the following characteristics:: •Better voltage maintenance. •Speedier charge-up available due to low impedance featu
KZ Premium Grade Type, For Audio Equipment series KZ High Grade FG
ALUMINUM ELECTROLYTIC CAPACITORS KZ Premium Grade Type, For Audio Equipment series Premium grade “nichicon MUSE” acoustic series. Ideally suited for first class audio equipment where qualitative and quantitative comfortableness is required. Compliant to the RoHS directive (2002/95/EC). KZ High Grade
ALUMINUM ELECTROLYTIC CAPACITORS KT For General Audio Equipment,Wide Temperature Range.series
ALUMINUM ELECTROLYTIC CAPACITORS KT For General Audio Equipment,Wide Temperature Range.series 105°C standard for audio equipment. Compliant to the RoHS directive (2002/95/EC). KT High Sound Quality VZ Specifications Item Performance Characteristics Category Temperature Range –55 to +105°C Rated Volt
FW Standard, For Audio Equipmentseries
ALUMINUM ELECTROLYTIC CAPACITORS FW Standard, For Audio Equipmentseries Compliant to the RoHS directive (2002/95/EC). KW High Sound Quality FG High Grade FW Specifications Item Performance Characteristics Category Temperature Range –40 to +85°C Rated Voltage Range 6.3 to 100V Rated Capacitance Range
LV Radial Lead Type, Long Life Assuranceseries LV High Voltage Long Life LF
CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS LV Radial Lead Type, Long Life Assuranceseries High voltage (to 63V), Low ESR, High ripple current. Long life of 3000 hours at 105°C. Radial lead type: Lead free flow soldering condition correspondence. Compliant to the RoHS directive (2002/9
LF Radial Lead Type, Standardseries
CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS LF Radial Lead Type, Standardseries Ultra-low ESR, High ripple current. Load life of 2000 hours at 105°C. LG Radial lead type : LV Lead free flow soldering condition correspondence. High Higher Compliant to the RoHS directive (2002/95/EC). Vo
LE Radial Lead Type, Ultra-low ESRseries
CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS LE Radial Lead Type, Ultra-low ESRseries Ultra-low ESR, High ripple current. Load life of 2000 hours at 105°C. Radial lead type : Lead free flow soldering condition correspondence Compliant to the RoHS directive (2002/95/EC). LF Low ESR LE Sp
CVChip Type, High Voltage / Long Lifeseries CV High Voltage Long Life CF
CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS CVChip Type, High Voltage / Long Lifeseries High voltage (to 63V), Low ESR, High ripple current. Load life of 3000 hours at 105°C. SMD type : Lead free reflow soldering condition at 260°C peak correspondence. Compliant to the RoHS directive (
LS Radial Lead Type, Long Life Assuranceseries LS Long Life LF
CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS LS Radial Lead Type, Long Life Assuranceseries Ultra-low ESR, High ripple current. Load life of 5000 hours at 105°C. Radial lead type : Lead free flow soldering condition correspondence. Compliant to the RoHS directive (2002/95/EC). LS Long L
LG Radial Lead Type, Higher Capacitanceseries
CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS LG Radial Lead Type, Higher Capacitanceseries Higher Capacitance, Low ESR, High ripple current. Load life of 2000 hours at 105°C. Radial lead type : Lead free flow soldering condition correspondence LG Compliant to the RoHS directive (2002/95
CS Chip Type, Long Life Assuranceseries CS Long Life CF
CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS CS Chip Type, Long Life Assuranceseries Load life of 5000 hours at 105°C. SMD type : Lead free reflow soldering condition at 260°C peak correspondence. Compliant to the RoHS directive (2002/95/EC). CS Long Life CF Specifications Item Performa
CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS CJ Chip Type, Low ESR, Higher Capacitanceseries
CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS CJ Chip Type, Low ESR, Higher Capacitanceseries CK Low ESR, Higher Capacitance, High ripple current. Low ESR Load life of 2000 hours at 105°C. SMD type : Lead free reflow soldering condition at 260°C peak correspondence. CJ Compliant to the R