Download: LE Radial Lead Type, Ultra-low ESRseries
CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS LE Radial Lead Type, Ultra-low ESRseries Ultra-low ESR, High ripple current. Load life of 2000 hours at 105°C. Radial lead type : Lead free flow soldering condition correspondence Compliant to the RoHS directive (2002/95/EC). LF Low ESR LE Specifications Item Performance Characteristics Category Temperature Range –55 to +105°C Rated Voltage Range 2.5 to 6.3V Rated Capacitance Range 470 to 1500µF Capacitance Tolerance ±20% at 120Hz, 20°C Tangent of loss angle (tan δ) Less than or equal to the specified value at 120Hz, 20°C ESR ( 1) Less ...
Author:
Richardson Shared: 8/19/19
Downloads: 212 Views: 3688
Content
CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS LE Radial Lead Type, Ultra-low ESRseries
Ultra-low ESR, High ripple current. Load life of 2000 hours at 105°C. Radial lead type : Lead free flow soldering condition correspondence Compliant to the RoHS directive (2002/95/EC). LF Low ESR LESpecifications
Item Performance Characteristics Category Temperature Range –55 to +105°C Rated Voltage Range 2.5 to 6.3V Rated Capacitance Range 470 to 1500µF Capacitance Tolerance ±20% at 120Hz, 20°C Tangent of loss angle (tan δ) Less than or equal to the specified value at 120Hz, 20°C ESR ( 1) Less than or equal to the specified value at 100kHz, 20°C Leakage Current ( 2) Less than or equal to the specified value. After 2 minutes' application of rated voltage at 20°C Temperature Characteristics Z+105°C / Z+20°C 1.25 (100kHz) (Max.Impedance Ratio) Z–55°C / Z+20°C 1.25 Capacitance change Within ± 20% of the initial capacitance value ( 3) The specifications listed at right shall be met when the tan δ 150% or less than the initial specified value Endurance capacitors are restored to 20°C after the rated voltage is applied for 2000 hours at 105°C. ESR ( 1) 150% or less than the initial specified value Leakage current ( 2) Less than or equal to the initial specified value Capacitance change Within ± 20% of the initial capacitance value ( 3) Damp Heat The specifications listed at right shall be met when the tan δ 150% or less than the initial specified value capacitors are restored to 20°C after the rated voltage is (Steady State) applied for 1000 hours at 60°C, 90% RH. ESR ( 1) 150% or less than the initial specified value Leakage current ( 2) Less than or equal to the initial specified value After soldering the capacitor under the soldering conditions prescribed Capacitance change Within ± 10% of the initial capacitance value ( 3) Resistance to here as preheat at 150 to 200°C for 60 to 180 seconds and peak tan δ 130% or less than the initial specified value temperature at 265°C for 10 seconds or less, the capacitor shall meet ESR ( 1)Soldering Heat 130% or less than the initial specified valuethe specifications listed at right, provided that its temperature profile is Leakage current ( 2) Less than or equal to the initial specified value measured at both of terminal ends facing the soldering side. Marking Navy blue print on the case top 1 ESR should be measured at both of the terminal ends closest to the capacitor body. 2 Conditioning : If any doubt arises, measure the leakage current after the voltage treatment of applying DC rated voltage continuously to the capacitor for 120 minutes at 105°C. 3 Initial value : The value before test of examination of resistance to soldering.Dimensions Type numbering system (Example : 4V 560µF)
Capacitance Resin coated Case Silvered lead Wire12345678910 11 12 Voltage(g:4V) PLE0G561MCO1Size code Configuration Capacitance toleranc (±20%) φd Series Lot. No. Rated capacitance (560µF) L+0.5MAX. 15MIN 4MIN Rated voltage (4V) Series name (mm) Type Size φ8 × 9L φ8 × 12L φ10 × 13L φD 8.0 8.0 10.0 Voltage L 8.5 11.5 12.5 V 2.5 4 6.3 P 3.5 3.5 5.0 φd 0.6 0.6 0.6 CodeegjPlease refer to page 20 about the end seal configulation. Dimension table in next page.CAT.8100Z
LE560g841φD+0.5 MAX. P±0.5,CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS LE series Standard Ratings
Rated Voltage Surge Voltage (V) Rated Capacitance Case Size δ Leakage Current ESR (mΩ) Rated Ripple(V) Code (µF) φD × L (mm) tan (µA) (at 100kHz 20°C) (mArms) Part Number 560 8 × 9 0.08 280 5 6100 PLE0E561MCO1 820 8 × 9 0.08 410 5 6300 PLE0E821MCO6 2.5 (0E) 2.8 820 8 × 12 0.08 410 5 6600 PLE0E821MDO1 1000 10 × 13 0.08 500 5 7100 PLE0E102MDO1 1500 10 × 13 0.08 750 5 7300 PLE0E152MDO1 560 8 × 9 0.08 448 5 6000 PLE0G561MCO1 4 680 8 × 12 0.08 544 5 6500 PLE0G681MDO1 4.6 (0G) 820 10 × 13 0.08 656 5 7000 PLE0G821MDO1 1200 10 × 13 0.08 960 5 7200 PLE0G122MDO1 470 8 × 12 0.08 592 5 6400 PLE0J471MDO1 6.3 (0J) 7.2 680 10 × 13 0.08 857 5 6700 PLE0J681MDO1 820 10 × 13 0.08 1033 5 6800 PLE0J821MDO1 Rated ripple current (mArms) at 105°C 100kHz No marked, 1 will be put at 12th digit of type numbering system. : In this case, 6 will be put at 12th digit of type numbering system. Taping specifications are given in page 20, 21, 22. Please refer to page 3 for the minimum order quantity.CAT.8100Z
]15
Similar documents
CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS CVChip Type, High Voltage / Long Lifeseries High voltage (to 63V), Low ESR, High ripple current. Load life of 3000 hours at 105°C. SMD type : Lead free reflow soldering condition at 260°C peak correspondence. Compliant to the RoHS directive (
CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS LS Radial Lead Type, Long Life Assuranceseries Ultra-low ESR, High ripple current. Load life of 5000 hours at 105°C. Radial lead type : Lead free flow soldering condition correspondence. Compliant to the RoHS directive (2002/95/EC). LS Long L
CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS LG Radial Lead Type, Higher Capacitanceseries Higher Capacitance, Low ESR, High ripple current. Load life of 2000 hours at 105°C. Radial lead type : Lead free flow soldering condition correspondence LG Compliant to the RoHS directive (2002/95
CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS CS Chip Type, Long Life Assuranceseries Load life of 5000 hours at 105°C. SMD type : Lead free reflow soldering condition at 260°C peak correspondence. Compliant to the RoHS directive (2002/95/EC). CS Long Life CF Specifications Item Performa
CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS CJ Chip Type, Low ESR, Higher Capacitanceseries CK Low ESR, Higher Capacitance, High ripple current. Low ESR Load life of 2000 hours at 105°C. SMD type : Lead free reflow soldering condition at 260°C peak correspondence. CJ Compliant to the R
CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS CK Chip Type, Ultra-low ESRseries Ultra-low ESR, Higher Capacitance, High ripple current. Load life of 2000 hours at 105°C. SMD type : Lead free reflow soldering condition at 260°C peak correspondence. Compliant to the RoHS directive (2002/95
CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS CG Chip Type, Higher Capacitanceseries Higher Capacitance, Low ESR, High ripple current. Load life of 2000 hours at 105°C. SMD type : Lead free reflow soldering condition at 260°C peak correspondence. CG Compliant to the RoHS directive (2002/
ALUMINUM ELECTROLYTIC CAPACITORS VZ Wide Temperature Rangeseries (Through 100V only) Small case sizes as same as VR series, but operating over wide temperature range of –55 to +105˚C. Compliant to the RoHS directive (2002/95/EC). PS High Rippie Current High Reliability VZ PJ Smaller High Temperature
ALUMINUM ELECTROLYTIC CAPACITORS VY Wide Temperature Rangeseries VZ Smaller One rank smaller case sizes than VZ series. Compliant to the RoHS directive (2002/95/EC). VY High Temperature VK Specifications Item Performance Characteristics Category Temperature Range – 55 to +105˚C (6.3 to 100V), – 40 t
ALUMINUM ELECTROLYTIC CAPACITORS VX Standard, For General Purposes - Axial Lead Type(02 type) series
ALUMINUM ELECTROLYTIC CAPACITORS VX Standard, For General Purposes - Axial Lead Type(02 type) series (Through 100V only) Axial lead type of standard series for general purposes. Compliant to the RoHS directive (2002/95/EC). Specifications Item Performance Characteristics Category Temperature Range –
ALUMINUM ELECTROLYTIC CAPACITORS VR Miniature Sizedseries VZ High One rank smaller case sizes than VX series. Temperature Compliant to the RoHS directive (2002/95/EC). VR Smaller VK Specifications Item Performance Characteristics Category Temperature Range –40 to +85˚C (6.3V to 400V), –25 to +85˚C (
ALUMINUM ELECTROLYTIC CAPACITORS VP Bi-Polarizedseries Standard bi-polarized series for entertainment electronics. Compliant to the RoHS directive (2002/95/EC). EP Wide Temperature VP Specifications Item Performance Characteristics Category Temperature Range –40 to +85°C Rated Voltage Range 6.3 to 1
ALUMINUM ELECTROLYTIC CAPACITORS VK Miniature Sizedseries VY High One rank smaller case sizes than VR series. Temperature Compliant to the RoHS directive (2002/95/EC). VK Smaller VR Specifications Item Performance Characteristics Category Temperature Range –40 to +85˚C (6.3V to 400V), –25˚C to +85˚C
ALUMINUM ELECTROLYTIC CAPACITORS UQ Chip Type, For Audio EquipmentWide Temperature Range series Chip type acoustic series within the wide temperature range. Applicable to automatic mounting machine fed with carrier tape. Compliant to the RoHS directive (2002/95/EC) UQ Chip type MW Specifications Ite
ALUMINUM ELECTROLYTIC CAPACITORS TT Miniature Sized, Low Impedance, Approved by Reliability Center for ElectronicHigh Reliability For Switching Power Supplies Component, Japan-Certification No. RCJ-03-23Cseries Smaller case size and Long Life product. Compliant to the RoHS directive (2002/95/EC). PW
ALUMINUM ELECTROLYTIC CAPACITORS TS Miniature Sized, Approved by Reliability Center for ElectronicHigh Reliability For Switching Power Supplies Component, Japan-Certification No. RCJ-03-23Cseries Smaller case size and Long Life product. Compliant to the RoHS directive (2002/95/EC). PS Long Life TS S
ALUMINUM ELECTROLYTIC CAPACITORS TM Timer Circuit Useseries Ideally suited for timer circuits. Excellent leakage current stability, even subjected to load or no load at high temperature for a long time. Compliant to the RoHS directive (2002/95/EC). KL HighStability TM Specifications Item Performance
ALUMINUM ELECTROLYTIC CAPACITORS SW 7mmL, For Audio Equipmentseries Acoustic series, with 7mm height. Compliant to the RoHS directive (2002/95/EC). SW Smaller MW Specifications Item Performance Characteristics Category Temperature Range –40 to +85˚C Rated Voltage Range 6.3 to 50V Rated Capacitance R
ALUMINUM ELECTROLYTIC CAPACITORS SV 7mmL, Long Life Assuranceseries Extended load life of 5000 hours at +105˚C, with 7mm height. Compliant to the RoHS directive (2002/95/EC). ST Long Life SV Specifications Item Performance Characteristics Category Temperature Range –40 to +105˚C Rated Voltage Range
ALUMINUM ELECTROLYTIC CAPACITORS ST 7mmL, Wide Temperature Rangeseries Wide temperature range of –55 to +105˚C, with 7mm height. Compliant to the RoHS directive (2002/95/EC). ST High Tem perature SA Specifications Item Performance Characteristics Category Temperature Range –55 to +105˚C Rated Voltag
ALUMINUM ELECTROLYTIC CAPACITORS SP 7mmL, Bi-Polarizedseries Bi-polarized series with 7mm height. Extended capacitance range by an addition of φ8 product. Compliant to the RoHS directive (2002/95/EC). SP Bi-polarized SA Specifications Item Performance Characteristics Category Temperature Range –40 t
ALUMINUM ELECTROLYTIC CAPACITORS SF 7mmL, Low Impedanceseries Low impedance over wide temperature range of –55 to +105˚C, with 7mm height. Compliant to the RoHS directive (2002/95/EC). SF LowImpedance ST Specifications Item Performance Characteristics Category Temperature Range –55 to +105˚C Rated V
ALUMINUM ELECTROLYTIC CAPACITORS SA 7mmL, For General 7mmL, High CVPurposesseries SR series Smaller Standard miniature series with Higher CV series with 7mm (SR series) 7mm height. height. ST High Compliant to the RoHS directive Temperature (2002/95/EC). SA Bi-polarized SP Smaller Specifications SR
ALUMINUM ELECTROLYTIC CAPACITORS RZ Compact & Low-Profile Sized, Wide Temperature Rangeseries Very small case sizes same as RS series, but operating over wide temperature range of –55 (–40) to +105˚C. (Through 100V only) Compliant to the RoHS directive (2002/95/EC). RZ High Temperature Specification
ALUMINUM ELECTROLYTIC CAPACITORS RY 12.5mmL Wide Temperature Rangeseries 12.5mmL height. Compliant to the RoHS directive (2002/95/EC). RY High Tem perature RU Specifications Item Performance Characteristics Category Temperature Range –55 to +105°C (6.3 to 100V), –40 to +105°C (160 to 400V), –25 to +
ALUMINUM ELECTROLYTIC CAPACITORS RU 12.5mmL series RY 12.5mmL height. Compliant to the RoHS directive (2002/95/EC). High Temperature RU Specifications Item Performance Characteristics Category Temperature Range – 40 to + 85°C (6.3V to 400V), – 25 to + 85°C (450V) Rated Voltage Range 6.3 to 450V Rate
ALUMINUM ELECTROLYTIC CAPACITORS RS Compact & Low-profile Sizedseries (Through 100V only) More compact & low profile case sizes than VS series. RZ Compliant to the RoHS directive (2002/95/EC). High Tem perature RS Specifications Item Performance Characteristics Category Temperature Range –40 to +85˚
ALUMINUM ELECTROLYTIC CAPACITORS QS Snap-in Terminal type, 105°C High speed charge-discharge.series Suited for high frequency regenerative voltage for AC servomotor, general inverter. Suited for equipment used at valtage fluctuating area. QS Suited for rectifier circuit of voltage doubler Compliant
ALUMINUM ELECTROLYTIC CAPACITORS PZ High Voltage, Smaller-sizedseries High ripple current. Load life of 2000 hours at 105°C. PT Suited for ballast applications. Compliant to the RoHS directive (2002/95/EC). Smaller PZ Specifications Item Performance Characteristics Category Temperature Range –25 to
PW Miniature Sized, Low lmpedance,High Reliability For Switching Power Suppliesseries Smaller case size and lower impedance than PM series. Low impedance and high reliability withstanding 2000 hours to 8000 hours. Capacitance ranges available based on the numerical values in E12 series under JIS. Co