Download: LS Radial Lead Type, Long Life Assuranceseries LS Long Life LF
CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS LS Radial Lead Type, Long Life Assuranceseries Ultra-low ESR, High ripple current. Load life of 5000 hours at 105°C. Radial lead type : Lead free flow soldering condition correspondence. Compliant to the RoHS directive (2002/95/EC). LS Long Life LF Specifications Item Performance Characteristics Category Temperature Range –55 to +105°C Rated Voltage Range 2.5 to 16V Rated Capacitance Range 100 to 1500µF Capacitance Tolerance ±20% at 120Hz, 20°C Tangent of loss angle (tan δ) Less than or equal to the specified value at 120Hz, 20°C ESR ( ...
Author:
Richardson Shared: 8/19/19
Downloads: 1751 Views: 4702
Content
CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS LS Radial Lead Type, Long Life Assuranceseries
Ultra-low ESR, High ripple current. Load life of 5000 hours at 105°C. Radial lead type : Lead free flow soldering condition correspondence. Compliant to the RoHS directive (2002/95/EC).LS Long Life LF Specifications
Item Performance Characteristics Category Temperature Range –55 to +105°C Rated Voltage Range 2.5 to 16V Rated Capacitance Range 100 to 1500µF Capacitance Tolerance ±20% at 120Hz, 20°C Tangent of loss angle (tan δ) Less than or equal to the specified value at 120Hz, 20°C ESR ( 1) Less than or equal to the specified value at 100kHz, 20°C Leakage Current ( 2) Less than or equal to the specified value. After 2 minutes' application of rated voltage at 20°C Temperature Characteristics Z+105°C / Z+20°C 1.25 (100kHz) (Max.Impedance Ratio) Z–55°C / Z+20°C 1.25 Capacitance change Within ± 20% of the initial capacitance value ( 3) The specifications listed at right shall be met when the tan δ 150% or less than the initial specified value Endurance capacitors are restored to 20°C after the rated voltage is applied for 5000 hours at 105°C. ESR ( 1) 150% or less than the initial specified value Leakage current ( 2) Less than or equal to the initial specified value Capacitance change Within ± 20% of the initial capacitance value ( 3) Damp Heat The specifications listed at right shall be met when the tan δ 150% or less than the initial specified value capacitors are restored to 20°C after the rated voltage is (Steady State) applied for 1000 hours at 60°C, 90% RH. ESR ( 1) 150% or less than the initial specified value Leakage current ( 2) Less than or equal to the initial specified value After soldering the capacitor under the soldering conditions Capacitance change Within ± 10% of the initial capacitance value ( 3) prescribed here as preheat at 150 to 200°C for 60 to 180 seconds tan δ Resistance to 130% or less than the initial specified valueand peak temperature at 265°C for 10 seconds or less, the ( 1) capacitor shall meet the specifications listed at right, provided that ESR 130% or less than the initial specified valueSoldering Heat its temperature profile is measured at both of terminal ends facing Leakage current ( 2) Less than or equal to the initial specified value the soldering side. Marking Navy blue print on the case top 1 ESR should be measured at both of the terminal ends closest to the capacitor body. 2 Conditioning : If any doubt arises, measure the leakage current after the voltage treatment of applying DC rated voltage continuously to the capacitor for 120 minutes at 105°C. 3 Initial value : The value before test of examination of resistance to soldering.Dimensions Type numbering system (Example : 10V 270µF)
Capacitance Resin coated Case Silvered lead Wire12345678910 11 12 Voltage(A:10V) PLS1A271MDO1Size code Configuration φd Capacitance toleranc (±20%) Series Lot. No. L+0.5MAX. 15MIN 4MIN Rated capacitance (270µF) Rated voltage (10V) Series name Type (mm) Size φ6.3 × 9L φ6.3 × 10.5L φ8 × 7L φ8 × 9L φ8 × 12L φ10 × 13L φD 6.3 6.3 8.0 8.0 8.0 10.0 Voltage L 8.5 10.0 6.5 8.5 11.5 12.5 V 2.5 4 6.3 10 16 P 2.5 2.5 3.5 3.5 3.5 5.0 φd 0.6 0.5 0.6 0.6 0.6 0.6 CodeegjACPlease refer to page 20 about the end seal configulation. Dimension table in next page.CAT.8100Z
LS270A
941φD+0.5 MAX. P±0.5,CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS LSseries Standard Ratings
Rated Voltage Surge Voltage Rated Capacitance Case Size δ Leakage Current ESR (mΩ) Rated Ripple(V) (V) (µF) φD × L (mm) tan (µA) (at 100kHz 20°C) (mArms) Part Number code 330 6.3 × 9 0.08 500 8 4800 PLS0E331MCO8 680 8 × 7 0.08 340 15 3900 PLS0E681MCL2 2.5 820 6.3 × 9 0.08 500 8 4800 PLS0E821MCO8 2.8 (0E) 820 8 × 9 0.08 410 7 5200 PLS0E821MCO6 820 8 × 12 0.08 410 7 5800 PLS0E821MDO1 1500 10 × 13 0.08 750 8 5500 PLS0E152MDO1 270 6.3 × 9 0.08 500 8 4800 PLS0G271MCO8 560 8 × 7 0.08 448 15 3900 PLS0G561MCL2 4.6 560 8 × 9 0.08 448 7 5200 PLS0G561MCO6 (0G) 680 8 × 12 0.08 544 7 5800 PLS0G681MDO1 1200 10 × 13 0.08 960 8 5500 PLS0G122MDO1 330 6.3 × 10.5 0.08 416 20 3000 PLS0J331MDL4 390 8 × 7 0.08 491 15 3900 PLS0J391MCL2 6.3 470 8 × 12 0.08 592 7 5500 PLS0J471MDO1 7.2 (0J) 560 6.3 × 9 0.08 706 9 4300 PLS0J561MCO8 560 8 × 9 0.08 706 8 5000 PLS0J561MCO6 820 10 × 13 0.08 1033 8 5500 PLS0J821MDO1 150 6.3 × 10.5 0.08 300 20 3000 PLS1A151MDL4 11.5 270 8 × 12 0.08 540 8 4900 PLS1A271MDO1 (1A) 470 10 × 13 0.08 940 8 5500 PLS1A471MDO1 100 6.3 × 10.5 0.08 320 24 2800 PLS1C101MDL4 16 270 8 × 12 0.08 864 9 4500 PLS1C271MDO1 18.4 (1C) 330 10 × 13 0.08 1056 9 4700 PLS1C331MDO1 470 10 × 13 0.08 1504 9 4700 PLS1C471MDO1 Rated ripple current (mArms) at 105°C 100kHz No marked, 1 will be put at 12th digit of type numbering system. : In this case, 2 will be put at 12th digit of type numbering system. : In this case, 4 will be put at 12th digit of type numbering system. : In this case, 6 will be put at 12th digit of type numbering system. : In this case, 8 will be put at 12th digit of type numbering system. Taping specifications are given in page 20, 21, 22. Please refer to page 3 for the minimum order quantity.CAT.8100Z
]15
Similar documents
CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS LG Radial Lead Type, Higher Capacitanceseries Higher Capacitance, Low ESR, High ripple current. Load life of 2000 hours at 105°C. Radial lead type : Lead free flow soldering condition correspondence LG Compliant to the RoHS directive (2002/95
CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS CS Chip Type, Long Life Assuranceseries Load life of 5000 hours at 105°C. SMD type : Lead free reflow soldering condition at 260°C peak correspondence. Compliant to the RoHS directive (2002/95/EC). CS Long Life CF Specifications Item Performa
CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS CJ Chip Type, Low ESR, Higher Capacitanceseries CK Low ESR, Higher Capacitance, High ripple current. Low ESR Load life of 2000 hours at 105°C. SMD type : Lead free reflow soldering condition at 260°C peak correspondence. CJ Compliant to the R
CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS CK Chip Type, Ultra-low ESRseries Ultra-low ESR, Higher Capacitance, High ripple current. Load life of 2000 hours at 105°C. SMD type : Lead free reflow soldering condition at 260°C peak correspondence. Compliant to the RoHS directive (2002/95
CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS CG Chip Type, Higher Capacitanceseries Higher Capacitance, Low ESR, High ripple current. Load life of 2000 hours at 105°C. SMD type : Lead free reflow soldering condition at 260°C peak correspondence. CG Compliant to the RoHS directive (2002/
ALUMINUM ELECTROLYTIC CAPACITORS VZ Wide Temperature Rangeseries (Through 100V only) Small case sizes as same as VR series, but operating over wide temperature range of –55 to +105˚C. Compliant to the RoHS directive (2002/95/EC). PS High Rippie Current High Reliability VZ PJ Smaller High Temperature
ALUMINUM ELECTROLYTIC CAPACITORS VY Wide Temperature Rangeseries VZ Smaller One rank smaller case sizes than VZ series. Compliant to the RoHS directive (2002/95/EC). VY High Temperature VK Specifications Item Performance Characteristics Category Temperature Range – 55 to +105˚C (6.3 to 100V), – 40 t
ALUMINUM ELECTROLYTIC CAPACITORS VX Standard, For General Purposes - Axial Lead Type(02 type) series
ALUMINUM ELECTROLYTIC CAPACITORS VX Standard, For General Purposes - Axial Lead Type(02 type) series (Through 100V only) Axial lead type of standard series for general purposes. Compliant to the RoHS directive (2002/95/EC). Specifications Item Performance Characteristics Category Temperature Range –
ALUMINUM ELECTROLYTIC CAPACITORS VR Miniature Sizedseries VZ High One rank smaller case sizes than VX series. Temperature Compliant to the RoHS directive (2002/95/EC). VR Smaller VK Specifications Item Performance Characteristics Category Temperature Range –40 to +85˚C (6.3V to 400V), –25 to +85˚C (
ALUMINUM ELECTROLYTIC CAPACITORS VP Bi-Polarizedseries Standard bi-polarized series for entertainment electronics. Compliant to the RoHS directive (2002/95/EC). EP Wide Temperature VP Specifications Item Performance Characteristics Category Temperature Range –40 to +85°C Rated Voltage Range 6.3 to 1
ALUMINUM ELECTROLYTIC CAPACITORS VK Miniature Sizedseries VY High One rank smaller case sizes than VR series. Temperature Compliant to the RoHS directive (2002/95/EC). VK Smaller VR Specifications Item Performance Characteristics Category Temperature Range –40 to +85˚C (6.3V to 400V), –25˚C to +85˚C
ALUMINUM ELECTROLYTIC CAPACITORS UQ Chip Type, For Audio EquipmentWide Temperature Range series Chip type acoustic series within the wide temperature range. Applicable to automatic mounting machine fed with carrier tape. Compliant to the RoHS directive (2002/95/EC) UQ Chip type MW Specifications Ite
ALUMINUM ELECTROLYTIC CAPACITORS TT Miniature Sized, Low Impedance, Approved by Reliability Center for ElectronicHigh Reliability For Switching Power Supplies Component, Japan-Certification No. RCJ-03-23Cseries Smaller case size and Long Life product. Compliant to the RoHS directive (2002/95/EC). PW
ALUMINUM ELECTROLYTIC CAPACITORS TS Miniature Sized, Approved by Reliability Center for ElectronicHigh Reliability For Switching Power Supplies Component, Japan-Certification No. RCJ-03-23Cseries Smaller case size and Long Life product. Compliant to the RoHS directive (2002/95/EC). PS Long Life TS S
ALUMINUM ELECTROLYTIC CAPACITORS TM Timer Circuit Useseries Ideally suited for timer circuits. Excellent leakage current stability, even subjected to load or no load at high temperature for a long time. Compliant to the RoHS directive (2002/95/EC). KL HighStability TM Specifications Item Performance
ALUMINUM ELECTROLYTIC CAPACITORS SW 7mmL, For Audio Equipmentseries Acoustic series, with 7mm height. Compliant to the RoHS directive (2002/95/EC). SW Smaller MW Specifications Item Performance Characteristics Category Temperature Range –40 to +85˚C Rated Voltage Range 6.3 to 50V Rated Capacitance R
ALUMINUM ELECTROLYTIC CAPACITORS SV 7mmL, Long Life Assuranceseries Extended load life of 5000 hours at +105˚C, with 7mm height. Compliant to the RoHS directive (2002/95/EC). ST Long Life SV Specifications Item Performance Characteristics Category Temperature Range –40 to +105˚C Rated Voltage Range
ALUMINUM ELECTROLYTIC CAPACITORS ST 7mmL, Wide Temperature Rangeseries Wide temperature range of –55 to +105˚C, with 7mm height. Compliant to the RoHS directive (2002/95/EC). ST High Tem perature SA Specifications Item Performance Characteristics Category Temperature Range –55 to +105˚C Rated Voltag
ALUMINUM ELECTROLYTIC CAPACITORS SP 7mmL, Bi-Polarizedseries Bi-polarized series with 7mm height. Extended capacitance range by an addition of φ8 product. Compliant to the RoHS directive (2002/95/EC). SP Bi-polarized SA Specifications Item Performance Characteristics Category Temperature Range –40 t
ALUMINUM ELECTROLYTIC CAPACITORS SF 7mmL, Low Impedanceseries Low impedance over wide temperature range of –55 to +105˚C, with 7mm height. Compliant to the RoHS directive (2002/95/EC). SF LowImpedance ST Specifications Item Performance Characteristics Category Temperature Range –55 to +105˚C Rated V
ALUMINUM ELECTROLYTIC CAPACITORS SA 7mmL, For General 7mmL, High CVPurposesseries SR series Smaller Standard miniature series with Higher CV series with 7mm (SR series) 7mm height. height. ST High Compliant to the RoHS directive Temperature (2002/95/EC). SA Bi-polarized SP Smaller Specifications SR
ALUMINUM ELECTROLYTIC CAPACITORS RZ Compact & Low-Profile Sized, Wide Temperature Rangeseries Very small case sizes same as RS series, but operating over wide temperature range of –55 (–40) to +105˚C. (Through 100V only) Compliant to the RoHS directive (2002/95/EC). RZ High Temperature Specification
ALUMINUM ELECTROLYTIC CAPACITORS RY 12.5mmL Wide Temperature Rangeseries 12.5mmL height. Compliant to the RoHS directive (2002/95/EC). RY High Tem perature RU Specifications Item Performance Characteristics Category Temperature Range –55 to +105°C (6.3 to 100V), –40 to +105°C (160 to 400V), –25 to +
ALUMINUM ELECTROLYTIC CAPACITORS RU 12.5mmL series RY 12.5mmL height. Compliant to the RoHS directive (2002/95/EC). High Temperature RU Specifications Item Performance Characteristics Category Temperature Range – 40 to + 85°C (6.3V to 400V), – 25 to + 85°C (450V) Rated Voltage Range 6.3 to 450V Rate
ALUMINUM ELECTROLYTIC CAPACITORS RS Compact & Low-profile Sizedseries (Through 100V only) More compact & low profile case sizes than VS series. RZ Compliant to the RoHS directive (2002/95/EC). High Tem perature RS Specifications Item Performance Characteristics Category Temperature Range –40 to +85˚
ALUMINUM ELECTROLYTIC CAPACITORS QS Snap-in Terminal type, 105°C High speed charge-discharge.series Suited for high frequency regenerative voltage for AC servomotor, general inverter. Suited for equipment used at valtage fluctuating area. QS Suited for rectifier circuit of voltage doubler Compliant
ALUMINUM ELECTROLYTIC CAPACITORS PZ High Voltage, Smaller-sizedseries High ripple current. Load life of 2000 hours at 105°C. PT Suited for ballast applications. Compliant to the RoHS directive (2002/95/EC). Smaller PZ Specifications Item Performance Characteristics Category Temperature Range –25 to
PW Miniature Sized, Low lmpedance,High Reliability For Switching Power Suppliesseries Smaller case size and lower impedance than PM series. Low impedance and high reliability withstanding 2000 hours to 8000 hours. Capacitance ranges available based on the numerical values in E12 series under JIS. Co
ALUMINUM ELECTROLYTIC CAPACITORS PX Long Life Assuranceseries Load life of 20000 hours at 105°C. Compliant to the RoHS directive (2002/95/EC). PM Long Life PX Specifications Item Performance Characteristitcs Category Temperature Range –55 to +105˚C Rated Voltage Range 10 to 35V Rated Capacitance Ran
ALUMINUM ELECTROLYTIC CAPACITORS PV Miniature Sized, Low Impedance, High Reliabilityseries Miniature sized low impedance series withstanding 5000 hours load life at +105°C. Compliant to the RoHS directive (2002/95/EC). PJ Long Life PV Specifications Item Performance Characteristics Category Temperat