Download: CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS CJ Chip Type, Low ESR, Higher Capacitanceseries

CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS CJ Chip Type, Low ESR, Higher Capacitanceseries CK Low ESR, Higher Capacitance, High ripple current. Low ESR Load life of 2000 hours at 105°C. SMD type : Lead free reflow soldering condition at 260°C peak correspondence. CJ Compliant to the RoHS directive (2002/95/EC). Low ESR Higher Capacitance, CF Specifications Item Performance Characteristics Category Temperature Range –55 to +105°C Rated Voltage Range 2.5 to 16V Rated Capacitance Range 33 to 2700µF Capacitance Tolerance ±20% at 120Hz, 20°C Tangent of loss angle (tan δ) Less than or...
Author: Richardson Shared: 8/19/19
Downloads: 300 Views: 1324

Content

CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS CJ Chip Type, Low ESR, Higher Capacitanceseries CK

Low ESR, Higher Capacitance, High ripple current. Low ESR Load life of 2000 hours at 105°C. SMD type : Lead free reflow soldering condition at 260°C peak correspondence. CJ Compliant to the RoHS directive (2002/95/EC). Low ESR Higher Capacitance,

CF Specifications

Item Performance Characteristics Category Temperature Range –55 to +105°C Rated Voltage Range 2.5 to 16V Rated Capacitance Range 33 to 2700µF Capacitance Tolerance ±20% at 120Hz, 20°C Tangent of loss angle (tan δ) Less than or equal to the specified value at 120Hz, 20°C ESR ( 1) Less than or equal to the specified value at 100kHz, 20°C Leakage Current ( 2) Less than or equal to the specified value . After 2 minutes' application of rated voltage at 20°C Temperature Characteristics Z+105°C / Z+20°C 1.25 (100kHz) (Max.Impedance Ratio) Z–55°C / Z+20°C 1.25 Capacitance change Within ± 20% of the initial capacitance value ( 3) The specifications listed at right shall be met when the tan δ 150% or less than the initial specified value Endurance capacitors are restored to 20°C after the rated voltage is applied for 2000 hours at 105°C. ESR ( 1) 150% or less than the initial specified value Leakage current ( 2) Less than or equal to the initial specified value Capacitance change Within ± 20% of the initial capacitance value ( 3) Damp Heat The specifications listed at right shall be met when the tan δ 150% or less than the initial specified value capacitors are restored to 20°C after the rated voltage is (Steady State) applied for 1000 hours at 60°C, 90% RH. ESR ( 1) 150% or less than the initial specified value Leakage current ( 2) Less than or equal to the initial specified value After soldering the capacitor under the soldering conditions prescribed here, the capacitor shall meet the specifications listed at Capacitance change Within ± 10% of the initial capacitance value ( 3) right, provided that it's temperature profile is measured at the tan δ 130% or less than the initial specified value capacitor top and the terminal. Pre-heating shall be done at 150 to 200°C and for 60 to 180 sec. ESR ( 1) 130% or less than the initial specified value The duration for over +230°C temperature at capacitor surface shall Leakage current ( 2) Less than or equal to the initial specified valueResistance to not exceed 60 seconds. Soldering Heat In the case of peak temp, less than 250°C, reflow soldering shall be two times maximum. In the case of peak temp, less than 260°C, reflow soldering shall be once. Measurement for solder temperature profile shall be made at the capacitor top and the terminal. Marking Navy blue print on the case top 1 ESR should be measured at both of the terminal ends closest where the terminals protrude through the plastic platform. 2 Conditioning : If any doubt arises, measure the leakage current after the voltage treatment of applying DC rated voltage continuously to the capacitor for 120 minutes at 105°C. 3 Initial value : The value before test of examination of resistance to soldering.

Dimensions Type numbering system (Example : 6.3V 220µF)

12345678910 11 12 13 14 Positive

PCJ0J221MCL1GS

Plastic platform Capacitance Lot No. 0.3 MAX. C±0.2 Taping code Size code Configuration Capacitance toleranc (±20%) Rated capacitance (220µF) L +0.1 Rated voltage (6.3V)Series Voltage ( j:6.3v) -0.4 Negative Series name

H

Type (mm) Size φ5 × 6L φ6.3 × 6L φ6.3 × 8L φ8 × 7L φ8 × 8L φ8 × 10L φ8 × 12L φ10 × 8L φ10 × 10L φ10 × 12.7L φD 5.0 6.3 6.3 8.0 8.0 8.0 8.0 10.0 10.0 10.0 L 5.9 5.9 7.9 6.9 7.9 9.9 11.9 7.9 9.9 12.6 A 6.0 7.3 7.3 9.0 9.0 9.0 9.0 11.0 11.0 11.0 B 5.3 6.6 6.6 8.3 8.3 8.3 8.3 10.3 10.3 10.3 Voltage C 5.3 6.6 6.6 8.3 8.3 8.3 8.3 10.3 10.3 10.3 V 2.5 4 6.3 10 16 E 1.6 2.1 2.1 3.2 3.2 3.2 3.2 4.6 4.6 4.6 H 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.8 to 1.1 0.8 to 1.1 0.8 to 1.1 0.8 to 1.1 0.8 to 1.1 0.8 to 1.1 0.8 to 1.1 CodeegjACDimension table in next page. CAT.8100ZCJ220j841φD + 0.5 MAX. B±0.2

E

0.5 MAX. A±0.2,

CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS CJ series Standard Ratings

Rated Voltage Surge Voltage Rated Capacitance Case Size Leakage Current ESR (mΩ) Rated Ripple (V)(code) (V) (µF) φD × L (mm) tan δ (µA) (at 100kHz 20°C) (mArms) Part Number 180 5 × 6 0.12 90 21 2670 PCJ0E181MCL1GS 390 6.3 × 6 0.12 195 15 3400 PCJ0E391MCL1GS 470 6.3 × 8 0.12 235 13 3600 PCJ0E471MCL1GS 560 6.3 × 8 0.12 280 13 3600 PCJ0E561MCL4GS 560 8 × 7 0.12 280 13 4100 PCJ0E561MCL1GS 680 8 × 7 0.12 340 13 4100 PCJ0E681MCL1GS 2.5 820 8 × 8 0.12 410 12 4260 PCJ0E821MCL6GS2.8 (0E) 820 8 × 12 0.12 410 9 5400 PCJ0E821MCL1GS 1000 8 × 8 0.12 500 12 4260 PCJ0E102MCL1GS 1200 10 × 8 0.12 600 13 4800 PCJ0E122MCL1GS 1500 8 × 10 0.12 750 10 5220 PCJ0E152MCL6GS 1500 8 × 12 0.12 750 9 5400 PCJ0E152MCL1GS 2200 10 × 10 0.12 1100 10 5500 PCJ0E222MCL1GS 2700 10 × 12.7 0.12 1350 9 5800 PCJ0E272MCL1GS 100 5 × 6 0.12 80 22 2610 PCJ0G101MCL1GS 150 5 × 6 0.12 120 22 2610 PCJ0G151MCL1GS 270 6.3 × 6 0.12 216 15 3200 PCJ0G271MCL1GS 330 6.3 × 6 0.12 264 15 3300 PCJ0G331MCL1GS 390 6.3 × 8 0.12 312 14 3470 PCJ0G391MCL1GS 470 8 × 7 0.12 376 14 3950 PCJ0G471MCL1GS 560 8 × 7 0.12 448 14 4000 PCJ0G561MCL1GS 560 8 × 12 0.12 448 9 5200 PCJ0G561MCL9GS 680 8 × 8 0.12 544 13 3950 PCJ0G681MCL1GS 4 4.6 1000 8 × 10 0.12 800 10 5220 PCJ0G102MCL4GS (0G) 1000 10 × 8 0.12 800 13 4300 PCJ0G102MCL1GS 1200 8 × 12 0.12 960 9 5400 PCJ0G122MCL1GS 1200 10 × 10 0.12 960 10 5500 PCJ0G122MCL6GS 1500 8 × 12 0.12 1200 9 5200 PCJ0G152MCL4GS 1500 10 × 10 0.12 1200 10 5500 PCJ0G152MCL1GS 1800 10 × 10 0.12 1440 10 5500 PCJ0G182MCL1GS 1800 10 × 12.7 0.12 1440 9 5600 PCJ0G182MCL9GS 2200 10 × 12.7 0.12 1760 9 5700 PCJ0G222MCL1GS 100 5 × 6 0.12 126 24 2500 PCJ0J101MCL1GS 120 5 × 6 0.12 151 24 2500 PCJ0J121MCL1GS 220 6.3 × 6 0.12 277 15 3200 PCJ0J221MCL1GS 270 6.3 × 8 0.12 340 14 3470 PCJ0J271MCL1GS 330 6.3 × 8 0.12 416 14 3470 PCJ0J331MCL4GS 330 8 × 7 0.12 416 14 3950 PCJ0J331MCL1GS 390 8 × 7 0.12 491 14 3950 PCJ0J391MCL1GS 6.3 7.2 470 8 × 8 0.12 592 13 3950 PCJ0J471MCL1GS (0J) 820 8 × 10 0.12 1033 12 4770 PCJ0J821MCL6GS 820 8 × 12 0.12 1033 10 5150 PCJ0J821MCL4GS 820 10 × 8 0.12 1033 13 4500 PCJ0J821MCL1GS 1200 10 × 10 0.12 1512 12 5025 PCJ0J122MCL1GS 1500 10 × 10 0.12 1890 12 5025 PCJ0J152MCL1GS 1500 10 × 12.7 0.12 1890 10 5500 PCJ0J152MCL9GS 1800 10 × 12.7 0.12 2268 11 5200 PCJ0J182MCL1GS 47 5 × 6 0.12 94 28 2310 PCJ1A470MCL1GS 56 5 × 6 0.12 112 28 2310 PCJ1A560MCL1GS 68 5 × 6 0.12 136 28 2310 PCJ1A680MCL1GS 120 6.3 × 6 0.12 240 25 2530 PCJ1A121MCL1GS 150 6.3 × 8 0.12 300 21 2880 PCJ1A151MCL1GS 10 11.5 220 8 × 7 0.12 440 21 3220 PCJ1A221MCL1GS (1A) 270 8 × 7 0.12 540 21 3220 PCJ1A271MCL1GS 330 8 × 8 0.12 660 19 3390 PCJ1A331MCL1GS 390 8 × 10 0.12 780 17 4000 PCJ1A391MCL1GS 470 10 × 8 0.12 940 19 3800 PCJ1A471MCL1GS 680 10 × 10 0.12 1360 13 4820 PCJ1A681MCL1GS 33 5 × 6 0.12 105 35 2070 PCJ1C330MCL1GS 39 5 × 6 0.12 125 35 2070 PCJ1C390MCL1GS 68 6.3 × 6 0.12 217 28 2390 PCJ1C680MCL1GS 82 6.3 × 8 0.12 262 24 2700 PCJ1C820MCL1GS 100 6.3 × 8 0.12 320 24 2700 PCJ1C101MCL4GS 100 8 × 7 0.12 320 24 3010 PCJ1C101MCL1GS 18.4 120 8 × 7 0.12 384 24 3010 PCJ1C121MCL1GS (1C) 150 8 × 8 0.12 480 22 3150 PCJ1C151MCL1GS 180 8 × 10 0.12 576 18 3890 PCJ1C181MCL1GS 220 8 × 10 0.12 704 18 3890 PCJ1C221MCL4GS 220 10 × 8 0.12 704 22 3450 PCJ1C221MCL1GS 270 8 × 12 0.12 864 16 4070 PCJ1C271MCL1GS 330 10 × 10 0.12 1056 16 4350 PCJ1C331MCL1GS Rated ripple current (mArms) at 105°C 100kHz Taping specifications are given in page 23. No marked, 1 will be put at 12th digit of type numbering system. Recommended land size, soldering by reflow are given in page 18, 19. : In this case, 4 will be put at 12th digit of type numbering system. Please refer to page 3 for the minimum order quantity. : In this case, 6 will be put at 12th digit of type numbering system. : In this case, 9 will be put at 12th digit of type numbering system.

CAT.8100Z

]
15

Similar documents

CK Chip Type, Ultra-low ESRseries
CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS CK Chip Type, Ultra-low ESRseries Ultra-low ESR, Higher Capacitance, High ripple current. Load life of 2000 hours at 105°C. SMD type : Lead free reflow soldering condition at 260°C peak correspondence. Compliant to the RoHS directive (2002/95
CG Chip Type, Higher Capacitanceseries
CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS CG Chip Type, Higher Capacitanceseries Higher Capacitance, Low ESR, High ripple current. Load life of 2000 hours at 105°C. SMD type : Lead free reflow soldering condition at 260°C peak correspondence. CG Compliant to the RoHS directive (2002/
ALUMINUM ELECTROLYTIC CAPACITORS VZ Wide Temperature Rangeseries
ALUMINUM ELECTROLYTIC CAPACITORS VZ Wide Temperature Rangeseries (Through 100V only) Small case sizes as same as VR series, but operating over wide temperature range of –55 to +105˚C. Compliant to the RoHS directive (2002/95/EC). PS High Rippie Current High Reliability VZ PJ Smaller High Temperature
VY Wide Temperature Rangeseries VY
ALUMINUM ELECTROLYTIC CAPACITORS VY Wide Temperature Rangeseries VZ Smaller One rank smaller case sizes than VZ series. Compliant to the RoHS directive (2002/95/EC). VY High Temperature VK Specifications Item Performance Characteristics Category Temperature Range – 55 to +105˚C (6.3 to 100V), – 40 t
ALUMINUM ELECTROLYTIC CAPACITORS VX Standard, For General Purposes - Axial Lead Type(02 type) series
ALUMINUM ELECTROLYTIC CAPACITORS VX Standard, For General Purposes - Axial Lead Type(02 type) series (Through 100V only) Axial lead type of standard series for general purposes. Compliant to the RoHS directive (2002/95/EC). Specifications Item Performance Characteristics Category Temperature Range –
VR Miniature Sizedseries VR
ALUMINUM ELECTROLYTIC CAPACITORS VR Miniature Sizedseries VZ High One rank smaller case sizes than VX series. Temperature Compliant to the RoHS directive (2002/95/EC). VR Smaller VK Specifications Item Performance Characteristics Category Temperature Range –40 to +85˚C (6.3V to 400V), –25 to +85˚C (
VP Bi-Polarizedseries
ALUMINUM ELECTROLYTIC CAPACITORS VP Bi-Polarizedseries Standard bi-polarized series for entertainment electronics. Compliant to the RoHS directive (2002/95/EC). EP Wide Temperature VP Specifications Item Performance Characteristics Category Temperature Range –40 to +85°C Rated Voltage Range 6.3 to 1
VK Miniature Sizedseries VK
ALUMINUM ELECTROLYTIC CAPACITORS VK Miniature Sizedseries VY High One rank smaller case sizes than VR series. Temperature Compliant to the RoHS directive (2002/95/EC). VK Smaller VR Specifications Item Performance Characteristics Category Temperature Range –40 to +85˚C (6.3V to 400V), –25˚C to +85˚C
UQ Chip Type, For Audio EquipmentWide Temperature Range series UQ Chip type MW
ALUMINUM ELECTROLYTIC CAPACITORS UQ Chip Type, For Audio EquipmentWide Temperature Range series Chip type acoustic series within the wide temperature range. Applicable to automatic mounting machine fed with carrier tape. Compliant to the RoHS directive (2002/95/EC) UQ Chip type MW Specifications Ite
ALUMINUM ELECTROLYTIC CAPACITORS PW Long Life TT Specifications
ALUMINUM ELECTROLYTIC CAPACITORS TT Miniature Sized, Low Impedance, Approved by Reliability Center for ElectronicHigh Reliability For Switching Power Supplies Component, Japan-Certification No. RCJ-03-23Cseries Smaller case size and Long Life product. Compliant to the RoHS directive (2002/95/EC). PW
ALUMINUM ELECTROLYTIC CAPACITORS PS Long Life TS Specifications
ALUMINUM ELECTROLYTIC CAPACITORS TS Miniature Sized, Approved by Reliability Center for ElectronicHigh Reliability For Switching Power Supplies Component, Japan-Certification No. RCJ-03-23Cseries Smaller case size and Long Life product. Compliant to the RoHS directive (2002/95/EC). PS Long Life TS S
ALUMINUM ELECTROLYTIC CAPACITORS TM Timer Circuit Useseries
ALUMINUM ELECTROLYTIC CAPACITORS TM Timer Circuit Useseries Ideally suited for timer circuits. Excellent leakage current stability, even subjected to load or no load at high temperature for a long time. Compliant to the RoHS directive (2002/95/EC). KL HighStability TM Specifications Item Performance
SW 7mmL, For Audio Equipmentseries SW
ALUMINUM ELECTROLYTIC CAPACITORS SW 7mmL, For Audio Equipmentseries Acoustic series, with 7mm height. Compliant to the RoHS directive (2002/95/EC). SW Smaller MW Specifications Item Performance Characteristics Category Temperature Range –40 to +85˚C Rated Voltage Range 6.3 to 50V Rated Capacitance R
ALUMINUM ELECTROLYTIC CAPACITORS SV 7mmL, Long Life Assuranceseries
ALUMINUM ELECTROLYTIC CAPACITORS SV 7mmL, Long Life Assuranceseries Extended load life of 5000 hours at +105˚C, with 7mm height. Compliant to the RoHS directive (2002/95/EC). ST Long Life SV Specifications Item Performance Characteristics Category Temperature Range –40 to +105˚C Rated Voltage Range
ST 7mmL, Wide Temperature Rangeseries ST
ALUMINUM ELECTROLYTIC CAPACITORS ST 7mmL, Wide Temperature Rangeseries Wide temperature range of –55 to +105˚C, with 7mm height. Compliant to the RoHS directive (2002/95/EC). ST High Tem perature SA Specifications Item Performance Characteristics Category Temperature Range –55 to +105˚C Rated Voltag
SP 7mmL, Bi-Polarizedseries SP Bi-polarized SA
ALUMINUM ELECTROLYTIC CAPACITORS SP 7mmL, Bi-Polarizedseries Bi-polarized series with 7mm height. Extended capacitance range by an addition of φ8 product. Compliant to the RoHS directive (2002/95/EC). SP Bi-polarized SA Specifications Item Performance Characteristics Category Temperature Range –40 t
SF 7mmL, Low Impedanceseries SF LowImpedance ST
ALUMINUM ELECTROLYTIC CAPACITORS SF 7mmL, Low Impedanceseries Low impedance over wide temperature range of –55 to +105˚C, with 7mm height. Compliant to the RoHS directive (2002/95/EC). SF LowImpedance ST Specifications Item Performance Characteristics Category Temperature Range –55 to +105˚C Rated V
ALUMINUM ELECTROLYTIC CAPACITORS SA 7mmL, For General 7mmL, High CVPurposesseries SR series
ALUMINUM ELECTROLYTIC CAPACITORS SA 7mmL, For General 7mmL, High CVPurposesseries SR series Smaller Standard miniature series with Higher CV series with 7mm (SR series) 7mm height. height. ST High Compliant to the RoHS directive Temperature (2002/95/EC). SA Bi-polarized SP Smaller Specifications SR
RZ Compact & Low-Profile Sized, Wide Temperature Rangeseries RZ
ALUMINUM ELECTROLYTIC CAPACITORS RZ Compact & Low-Profile Sized, Wide Temperature Rangeseries Very small case sizes same as RS series, but operating over wide temperature range of –55 (–40) to +105˚C. (Through 100V only) Compliant to the RoHS directive (2002/95/EC). RZ High Temperature Specification
RY 12.5mmL Wide Temperature Rangeseries
ALUMINUM ELECTROLYTIC CAPACITORS RY 12.5mmL Wide Temperature Rangeseries 12.5mmL height. Compliant to the RoHS directive (2002/95/EC). RY High Tem perature RU Specifications Item Performance Characteristics Category Temperature Range –55 to +105°C (6.3 to 100V), –40 to +105°C (160 to 400V), –25 to +
RU 12.5mmL series
ALUMINUM ELECTROLYTIC CAPACITORS RU 12.5mmL series RY 12.5mmL height. Compliant to the RoHS directive (2002/95/EC). High Temperature RU Specifications Item Performance Characteristics Category Temperature Range – 40 to + 85°C (6.3V to 400V), – 25 to + 85°C (450V) Rated Voltage Range 6.3 to 450V Rate
RS Compact & Low-profile Sizedseries RS
ALUMINUM ELECTROLYTIC CAPACITORS RS Compact & Low-profile Sizedseries (Through 100V only) More compact & low profile case sizes than VS series. RZ Compliant to the RoHS directive (2002/95/EC). High Tem perature RS Specifications Item Performance Characteristics Category Temperature Range –40 to +85˚
ALUMINUM ELECTROLYTIC CAPACITORS QS Snap-in Terminal type, 105°C High speed charge-discharge.series
ALUMINUM ELECTROLYTIC CAPACITORS QS Snap-in Terminal type, 105°C High speed charge-discharge.series Suited for high frequency regenerative voltage for AC servomotor, general inverter. Suited for equipment used at valtage fluctuating area. QS Suited for rectifier circuit of voltage doubler Compliant
PZ High Voltage, Smaller-sizedseries
ALUMINUM ELECTROLYTIC CAPACITORS PZ High Voltage, Smaller-sizedseries High ripple current. Load life of 2000 hours at 105°C. PT Suited for ballast applications. Compliant to the RoHS directive (2002/95/EC). Smaller PZ Specifications Item Performance Characteristics Category Temperature Range –25 to
PW Miniature Sized, Low lmpedance,High Reliability For Switching Power Suppliesseries
PW Miniature Sized, Low lmpedance,High Reliability For Switching Power Suppliesseries Smaller case size and lower impedance than PM series. Low impedance and high reliability withstanding 2000 hours to 8000 hours. Capacitance ranges available based on the numerical values in E12 series under JIS. Co
PX Long Life Assuranceseries
ALUMINUM ELECTROLYTIC CAPACITORS PX Long Life Assuranceseries Load life of 20000 hours at 105°C. Compliant to the RoHS directive (2002/95/EC). PM Long Life PX Specifications Item Performance Characteristitcs Category Temperature Range –55 to +105˚C Rated Voltage Range 10 to 35V Rated Capacitance Ran
ALUMINUM ELECTROLYTIC CAPACITORS PV Miniature Sized, Low Impedance, High Reliabilityseries
ALUMINUM ELECTROLYTIC CAPACITORS PV Miniature Sized, Low Impedance, High Reliabilityseries Miniature sized low impedance series withstanding 5000 hours load life at +105°C. Compliant to the RoHS directive (2002/95/EC). PJ Long Life PV Specifications Item Performance Characteristics Category Temperat
PT Miniature Sized, High Ripple Current, Long Lifeseries PT
ALUMINUM ELECTROLYTIC CAPACITORS PT Miniature Sized, High Ripple Current, Long Lifeseries High ripple current. PB Suited for ballast application. Smaller Compliant to the RoHS directive (2002/95/EC). PT Smaller PZ Specifications Item Performance Characteristics Category Temperature Range –25 to +105
PS Miniature Sized, Low Impedance, For Switching Power Suppliesseries PS Long Life TS
ALUMINUM ELECTROLYTIC CAPACITORS PS Miniature Sized, Low Impedance, For Switching Power Suppliesseries (Through 100V only) Wide temperature range type, miniature sized. Compliant to the RoHS directive (2002/95/EC). PJ Smaller PS Long Life TS Specifications Item Performance Characteristics Category T
NW5 SERIES
MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS NW5 NW5 SERIES Bi-polar, 5mm Height ◆FEATURES ・RoHS compliance. ◆SPECIFICATIONS Items Characteristics Category Temperature Range -40~+85℃ Rated Voltage Range 6.3~50V.DC Capacitance Tolerance ±20%(20℃,120Hz) I=0.05CV or 10μA whichever is greater. (After 5 mi