Download: CK Chip Type, Ultra-low ESRseries

CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS CK Chip Type, Ultra-low ESRseries Ultra-low ESR, Higher Capacitance, High ripple current. Load life of 2000 hours at 105°C. SMD type : Lead free reflow soldering condition at 260°C peak correspondence. Compliant to the RoHS directive (2002/95/EC). CJ Low ESR CK Specifications Item Performance Characteristics Category Temperature Range –55 to +105°C Rated Voltage Range 2.5 to 6.3V Rated Capacitance Range 220 to 2200µF Capacitance Tolerance ±20% at 120Hz, 20°C Tangent of loss angle (tan δ) Less than or equal to the specified value at 120H...
Author: Richardson Shared: 8/19/19
Downloads: 117 Views: 518

Content

CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS CK Chip Type, Ultra-low ESRseries

Ultra-low ESR, Higher Capacitance, High ripple current. Load life of 2000 hours at 105°C. SMD type : Lead free reflow soldering condition at 260°C peak correspondence. Compliant to the RoHS directive (2002/95/EC).

CJ Low ESR CK Specifications

Item Performance Characteristics Category Temperature Range –55 to +105°C Rated Voltage Range 2.5 to 6.3V Rated Capacitance Range 220 to 2200µF Capacitance Tolerance ±20% at 120Hz, 20°C Tangent of loss angle (tan δ) Less than or equal to the specified value at 120Hz, 20°C ESR ( 1) Less than or equal to the specified value at 100kHz, 20°C Leakage Current ( 2) Less than or equal to the specified value . After 2 minutes' application of rated voltage at 20°C Temperature Characteristics Z+105°C / Z+20°C 1.25 (100kHz) (Max.Impedance Ratio) Z–55°C / Z+20°C 1.25 Capacitance change Within ± 20% of the initial capacitance value ( 3) The specifications listed at right shall be met when the tan δ 150% or less than the initial specified value Endurance capacitors are restored to 20°C after the rated voltage is applied for 2000 hours at 105°C. ESR ( 1) 150% or less than the initial specified value Leakage current ( 2) Less than or equal to the initial specified value Capacitance change Within ± 20% of the initial capacitance value ( 3) Damp Heat The specifications listed at right shall be met when the tan δ 150% or less than the initial specified value capacitors are restored to 20°C after the rated voltage is (Steady State) applied for 1000 hours at 60°C, 90% RH. ESR ( 1) 150% or less than the initial specified value Leakage current ( 2) Less than or equal to the initial specified value After soldering the capacitor under the soldering conditions prescribed here, the capacitor shall meet the specifications listed at Capacitance change Within ± 10% of the initial capacitance value ( 3) right, provided that it's temperature profile is measured at the tan δ 130% or less than the initial specified value capacitor top and the terminal. Pre-heating shall be done at 150 to 200°C and for 60 to 180 sec. ESR ( 1) 130% or less than the initial specified value The duration for over +230°C temperature at capacitor surface shall Leakage current ( 2) Less than or equal to the initial specified valueResistance to not exceed 60 seconds. Soldering Heat In the case of peak temp, less than 250°C, reflow soldering shall be two times maximum. In the case of peak temp, less than 260°C, reflow soldering shall be once. Measurement for solder temperature profile shall be made at the capacitor top and the terminal. Marking Navy blue print on the case top 1 ESR should be measured at both of the terminal ends closest where the terminals protrude through the plastic platform. 2 Conditioning : If any doubt arises, measure the leakage current after the voltage treatment of applying DC rated voltage continuously to the capacitor for 120 minutes at 105°C. 3 Initial value : The value before test of examination of resistance to soldering.

Dimensions Type numbering system (Example : 6.3V 220µF) Positive

Plastic platform12345678910 11 12 13 14 Capacitance Lot No. 0.3 MAX. C±0.2PCK0J221MCO1GSTaping code Configuration Capacitance toleranc (±20%) +0.1 Series Voltage ( j:6.3v) L -0.4 Rated capacitance (220µF)Negative H Rated voltage (6.3V) Series name (mm) Type Size φ6.3 × 6L φ8 × 7L φ10 × 8L φ10 × 10L φD 6.3 8.0 10.0 10.0 L 5.9 6.9 7.9 9.9 A 7.3 9.0 11.0 11.0 B 6.6 8.3 10.3 10.3 Voltage C 6.6 8.3 10.3 10.3 V 2.5 4 6.3 E 2.1 3.2 4.6 4.6 H 0.5 to 0.8 0.8 to 1.1 0.8 to 1.1 0.8 to 1.1 CodeegjDimension table in next page. CAT.8100ZCK220j941φD + 0.5 MAX. B±0.2

E

0.5 MAX. A±0.2,

CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS CKseries Standard Ratings

Rated Voltage Surge Voltage Rated Capacitance Case Size δ Leakage Current ESR (mΩ) Rated Ripple(V)(code) (V) (µF) φD × L (mm) tan (µA) (at 100kHz 20°C) (mArms) Part Number 390 6.3 × 6 0.12 293 10 3900 PCK0E391MCO1GS 560 8 × 7 0.12 420 9 4500 PCK0E561MCO1GS 2.5 2.8 680 8 × 7 0.12 510 9 4500 PCK0E681MCO1GS (0E) 1200 10 × 8 0.12 900 9 5000 PCK0E122MCO1GS 2200 10 × 10 0.12 1650 8 6000 PCK0E222MCO1GS 330 6.3 × 6 0.12 396 10 3900 PCK0G331MCO1GS 470 8 × 7 0.12 564 9 4500 PCK0G471MCO1GS 4.6 560 8 × 7 0.12 672 9 4500 PCK0G561MCO1GS (0G) 1000 10 × 8 0.12 1200 9 5000 PCK0G102MCO1GS 1800 10 × 10 0.12 2160 8 6000 PCK0G182MCO1GS 220 6.3 × 6 0.12 416 10 3900 PCK0J221MCO1GS 330 8 × 7 0.12 624 9 4500 PCK0J331MCO1GS 6.3 7.2 390 8 × 7 0.12 737 9 4500 PCK0J391MCO1GS (0J) 820 10 × 8 0.12 1550 9 5000 PCK0J821MCO1GS 1500 10 × 10 0.12 2835 8 6000 PCK0J152MCO1GS Rated ripple current (mArms) at 105°C 100kHz No marked, 1 will be put at 12th digit of type numbering system. Taping specifications are given in page 23. Recommended land size, soldering by reflow are given in page 18, 19. Please refer to page 3 for the minimum order quantity.

CAT.8100Z

]
15

Similar documents

CG Chip Type, Higher Capacitanceseries
CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS CG Chip Type, Higher Capacitanceseries Higher Capacitance, Low ESR, High ripple current. Load life of 2000 hours at 105°C. SMD type : Lead free reflow soldering condition at 260°C peak correspondence. CG Compliant to the RoHS directive (2002/
ALUMINUM ELECTROLYTIC CAPACITORS VZ Wide Temperature Rangeseries
ALUMINUM ELECTROLYTIC CAPACITORS VZ Wide Temperature Rangeseries (Through 100V only) Small case sizes as same as VR series, but operating over wide temperature range of –55 to +105˚C. Compliant to the RoHS directive (2002/95/EC). PS High Rippie Current High Reliability VZ PJ Smaller High Temperature
VY Wide Temperature Rangeseries VY
ALUMINUM ELECTROLYTIC CAPACITORS VY Wide Temperature Rangeseries VZ Smaller One rank smaller case sizes than VZ series. Compliant to the RoHS directive (2002/95/EC). VY High Temperature VK Specifications Item Performance Characteristics Category Temperature Range – 55 to +105˚C (6.3 to 100V), – 40 t
ALUMINUM ELECTROLYTIC CAPACITORS VX Standard, For General Purposes - Axial Lead Type(02 type) series
ALUMINUM ELECTROLYTIC CAPACITORS VX Standard, For General Purposes - Axial Lead Type(02 type) series (Through 100V only) Axial lead type of standard series for general purposes. Compliant to the RoHS directive (2002/95/EC). Specifications Item Performance Characteristics Category Temperature Range –
VR Miniature Sizedseries VR
ALUMINUM ELECTROLYTIC CAPACITORS VR Miniature Sizedseries VZ High One rank smaller case sizes than VX series. Temperature Compliant to the RoHS directive (2002/95/EC). VR Smaller VK Specifications Item Performance Characteristics Category Temperature Range –40 to +85˚C (6.3V to 400V), –25 to +85˚C (
VP Bi-Polarizedseries
ALUMINUM ELECTROLYTIC CAPACITORS VP Bi-Polarizedseries Standard bi-polarized series for entertainment electronics. Compliant to the RoHS directive (2002/95/EC). EP Wide Temperature VP Specifications Item Performance Characteristics Category Temperature Range –40 to +85°C Rated Voltage Range 6.3 to 1
VK Miniature Sizedseries VK
ALUMINUM ELECTROLYTIC CAPACITORS VK Miniature Sizedseries VY High One rank smaller case sizes than VR series. Temperature Compliant to the RoHS directive (2002/95/EC). VK Smaller VR Specifications Item Performance Characteristics Category Temperature Range –40 to +85˚C (6.3V to 400V), –25˚C to +85˚C
UQ Chip Type, For Audio EquipmentWide Temperature Range series UQ Chip type MW
ALUMINUM ELECTROLYTIC CAPACITORS UQ Chip Type, For Audio EquipmentWide Temperature Range series Chip type acoustic series within the wide temperature range. Applicable to automatic mounting machine fed with carrier tape. Compliant to the RoHS directive (2002/95/EC) UQ Chip type MW Specifications Ite
ALUMINUM ELECTROLYTIC CAPACITORS PW Long Life TT Specifications
ALUMINUM ELECTROLYTIC CAPACITORS TT Miniature Sized, Low Impedance, Approved by Reliability Center for ElectronicHigh Reliability For Switching Power Supplies Component, Japan-Certification No. RCJ-03-23Cseries Smaller case size and Long Life product. Compliant to the RoHS directive (2002/95/EC). PW
ALUMINUM ELECTROLYTIC CAPACITORS PS Long Life TS Specifications
ALUMINUM ELECTROLYTIC CAPACITORS TS Miniature Sized, Approved by Reliability Center for ElectronicHigh Reliability For Switching Power Supplies Component, Japan-Certification No. RCJ-03-23Cseries Smaller case size and Long Life product. Compliant to the RoHS directive (2002/95/EC). PS Long Life TS S
ALUMINUM ELECTROLYTIC CAPACITORS TM Timer Circuit Useseries
ALUMINUM ELECTROLYTIC CAPACITORS TM Timer Circuit Useseries Ideally suited for timer circuits. Excellent leakage current stability, even subjected to load or no load at high temperature for a long time. Compliant to the RoHS directive (2002/95/EC). KL HighStability TM Specifications Item Performance
SW 7mmL, For Audio Equipmentseries SW
ALUMINUM ELECTROLYTIC CAPACITORS SW 7mmL, For Audio Equipmentseries Acoustic series, with 7mm height. Compliant to the RoHS directive (2002/95/EC). SW Smaller MW Specifications Item Performance Characteristics Category Temperature Range –40 to +85˚C Rated Voltage Range 6.3 to 50V Rated Capacitance R
ALUMINUM ELECTROLYTIC CAPACITORS SV 7mmL, Long Life Assuranceseries
ALUMINUM ELECTROLYTIC CAPACITORS SV 7mmL, Long Life Assuranceseries Extended load life of 5000 hours at +105˚C, with 7mm height. Compliant to the RoHS directive (2002/95/EC). ST Long Life SV Specifications Item Performance Characteristics Category Temperature Range –40 to +105˚C Rated Voltage Range
ST 7mmL, Wide Temperature Rangeseries ST
ALUMINUM ELECTROLYTIC CAPACITORS ST 7mmL, Wide Temperature Rangeseries Wide temperature range of –55 to +105˚C, with 7mm height. Compliant to the RoHS directive (2002/95/EC). ST High Tem perature SA Specifications Item Performance Characteristics Category Temperature Range –55 to +105˚C Rated Voltag
SP 7mmL, Bi-Polarizedseries SP Bi-polarized SA
ALUMINUM ELECTROLYTIC CAPACITORS SP 7mmL, Bi-Polarizedseries Bi-polarized series with 7mm height. Extended capacitance range by an addition of φ8 product. Compliant to the RoHS directive (2002/95/EC). SP Bi-polarized SA Specifications Item Performance Characteristics Category Temperature Range –40 t
SF 7mmL, Low Impedanceseries SF LowImpedance ST
ALUMINUM ELECTROLYTIC CAPACITORS SF 7mmL, Low Impedanceseries Low impedance over wide temperature range of –55 to +105˚C, with 7mm height. Compliant to the RoHS directive (2002/95/EC). SF LowImpedance ST Specifications Item Performance Characteristics Category Temperature Range –55 to +105˚C Rated V
ALUMINUM ELECTROLYTIC CAPACITORS SA 7mmL, For General 7mmL, High CVPurposesseries SR series
ALUMINUM ELECTROLYTIC CAPACITORS SA 7mmL, For General 7mmL, High CVPurposesseries SR series Smaller Standard miniature series with Higher CV series with 7mm (SR series) 7mm height. height. ST High Compliant to the RoHS directive Temperature (2002/95/EC). SA Bi-polarized SP Smaller Specifications SR
RZ Compact & Low-Profile Sized, Wide Temperature Rangeseries RZ
ALUMINUM ELECTROLYTIC CAPACITORS RZ Compact & Low-Profile Sized, Wide Temperature Rangeseries Very small case sizes same as RS series, but operating over wide temperature range of –55 (–40) to +105˚C. (Through 100V only) Compliant to the RoHS directive (2002/95/EC). RZ High Temperature Specification
RY 12.5mmL Wide Temperature Rangeseries
ALUMINUM ELECTROLYTIC CAPACITORS RY 12.5mmL Wide Temperature Rangeseries 12.5mmL height. Compliant to the RoHS directive (2002/95/EC). RY High Tem perature RU Specifications Item Performance Characteristics Category Temperature Range –55 to +105°C (6.3 to 100V), –40 to +105°C (160 to 400V), –25 to +
RU 12.5mmL series
ALUMINUM ELECTROLYTIC CAPACITORS RU 12.5mmL series RY 12.5mmL height. Compliant to the RoHS directive (2002/95/EC). High Temperature RU Specifications Item Performance Characteristics Category Temperature Range – 40 to + 85°C (6.3V to 400V), – 25 to + 85°C (450V) Rated Voltage Range 6.3 to 450V Rate
RS Compact & Low-profile Sizedseries RS
ALUMINUM ELECTROLYTIC CAPACITORS RS Compact & Low-profile Sizedseries (Through 100V only) More compact & low profile case sizes than VS series. RZ Compliant to the RoHS directive (2002/95/EC). High Tem perature RS Specifications Item Performance Characteristics Category Temperature Range –40 to +85˚
ALUMINUM ELECTROLYTIC CAPACITORS QS Snap-in Terminal type, 105°C High speed charge-discharge.series
ALUMINUM ELECTROLYTIC CAPACITORS QS Snap-in Terminal type, 105°C High speed charge-discharge.series Suited for high frequency regenerative voltage for AC servomotor, general inverter. Suited for equipment used at valtage fluctuating area. QS Suited for rectifier circuit of voltage doubler Compliant
PZ High Voltage, Smaller-sizedseries
ALUMINUM ELECTROLYTIC CAPACITORS PZ High Voltage, Smaller-sizedseries High ripple current. Load life of 2000 hours at 105°C. PT Suited for ballast applications. Compliant to the RoHS directive (2002/95/EC). Smaller PZ Specifications Item Performance Characteristics Category Temperature Range –25 to
PW Miniature Sized, Low lmpedance,High Reliability For Switching Power Suppliesseries
PW Miniature Sized, Low lmpedance,High Reliability For Switching Power Suppliesseries Smaller case size and lower impedance than PM series. Low impedance and high reliability withstanding 2000 hours to 8000 hours. Capacitance ranges available based on the numerical values in E12 series under JIS. Co
PX Long Life Assuranceseries
ALUMINUM ELECTROLYTIC CAPACITORS PX Long Life Assuranceseries Load life of 20000 hours at 105°C. Compliant to the RoHS directive (2002/95/EC). PM Long Life PX Specifications Item Performance Characteristitcs Category Temperature Range –55 to +105˚C Rated Voltage Range 10 to 35V Rated Capacitance Ran
ALUMINUM ELECTROLYTIC CAPACITORS PV Miniature Sized, Low Impedance, High Reliabilityseries
ALUMINUM ELECTROLYTIC CAPACITORS PV Miniature Sized, Low Impedance, High Reliabilityseries Miniature sized low impedance series withstanding 5000 hours load life at +105°C. Compliant to the RoHS directive (2002/95/EC). PJ Long Life PV Specifications Item Performance Characteristics Category Temperat
PT Miniature Sized, High Ripple Current, Long Lifeseries PT
ALUMINUM ELECTROLYTIC CAPACITORS PT Miniature Sized, High Ripple Current, Long Lifeseries High ripple current. PB Suited for ballast application. Smaller Compliant to the RoHS directive (2002/95/EC). PT Smaller PZ Specifications Item Performance Characteristics Category Temperature Range –25 to +105
PS Miniature Sized, Low Impedance, For Switching Power Suppliesseries PS Long Life TS
ALUMINUM ELECTROLYTIC CAPACITORS PS Miniature Sized, Low Impedance, For Switching Power Suppliesseries (Through 100V only) Wide temperature range type, miniature sized. Compliant to the RoHS directive (2002/95/EC). PJ Smaller PS Long Life TS Specifications Item Performance Characteristics Category T
NW5 SERIES
MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS NW5 NW5 SERIES Bi-polar, 5mm Height ◆FEATURES ・RoHS compliance. ◆SPECIFICATIONS Items Characteristics Category Temperature Range -40~+85℃ Rated Voltage Range 6.3~50V.DC Capacitance Tolerance ±20%(20℃,120Hz) I=0.05CV or 10μA whichever is greater. (After 5 mi
NA SERIES
MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS NA NA SERIES 85℃ Bi-polar Miniaturized ◆FEATURES ・RoHS compliance. ◆SPECIFICATIONS Items Characteristics Category Temperature Range -40~+85℃ Rated Voltage Range 6.3~100V.DC Capacitance Tolerance ±20%(20℃,120Hz) I=0.03CV or 3μA whichever is greater. (After 5