Download: ALUMINUM ELECTROLYTIC CAPACITORS QS Snap-in Terminal type, 105°C High speed charge-discharge.series
ALUMINUM ELECTROLYTIC CAPACITORS QS Snap-in Terminal type, 105°C High speed charge-discharge.series Suited for high frequency regenerative voltage for AC servomotor, general inverter. Suited for equipment used at valtage fluctuating area. QS Suited for rectifier circuit of voltage doubler Compliant to the RoHS directive (2002/95/EC). Hi speed charge- discharge GU Specifications Item Performance Characteristics Category Temperature Range – 25 to +105°C Rated Voltage Range 350 to 450V Rated Capacitance Range 82 to 820µF Capacitance Tolerance ±20% at 120Hz, 20°C Leakage CurrentI3CV(µA) (After 5 m...
Author:
Richardson Shared: 8/19/19
Downloads: 426 Views: 2348
Content
ALUMINUM ELECTROLYTIC CAPACITORS QS Snap-in Terminal type, 105°C High speed charge-discharge.series Suited for high frequency regenerative voltage for AC servomotor,
general inverter.Suited for equipment used at valtage fluctuating area. QS Suited for rectifier circuit of voltage doubler Compliant to the RoHS directive (2002/95/EC). Hi speed
charge- dischargeGU Specifications
Item Performance Characteristics Category Temperature Range – 25 to +105°C Rated Voltage Range 350 to 450V Rated Capacitance Range 82 to 820µF Capacitance Tolerance ±20% at 120Hz, 20°C Leakage CurrentI3CV(µA) (After 5 minutes' application of rated voltage [C : Rated Capacitance(µF), V : Voltage ( V ) ] Measurement frequency : 120Hz, Temperature : 20°C Tangent of loss angle (tan δ) Rated voltage (V) 350 400 420 450 tan δ (MAX.) 0.15 0.15 0.15 0.20 Rated voltage (V) 350 to 450 Measurement frequency : 120Hz Stability at Low Temperature Z – 25°C / Z+20°C Impedance ratio ZT/Z20(MAX.) After an application of charge-discharge voltage for 50million times Capacitance change Within ±20% of the initial capacitance value Endurance of charge- (charge-discharge voltage difference(∆V) = rated voltage × 0.35, cycle tan δ 300% or less than the initial specified value discharge behavior 6Hz) capacitors shell meet the characteristics requirement listed at Leakage current Less than or equal to the initial specified value right. Appearance There shell be found to remarkable abnormality on the capacitor The specifications listed at right shall be met when the capacitors are restored Capacitance change Within ±20% of the initial capacitance value Endurance to 20°C after D.C. bias plus rated ripple current is applied for 3000 hours at tan δ 200% or less than the initial specified value 105°C, the peak voltage shall not exceed the rated voltage. Leakage current Less than or equal to the initial specified value After storing the capacitors under no load at 105°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, Shelf Life they shall meet the specified value for endurance characteristics listed above. Marking Printed with white color letter on black sleeve.Drawing Type numbering system (Example : 400V 180µF)
Polarity bar12345678910 11 12 13 14 Sleeve (P.E.T.) LQS2G181MELA30Case length code Case dia. code Configuration φD Code 10 Capacitance tolerance (±20%) 22 Z L±2 25 A 4.0±0.5 Rated capacitance (180µF) 30 B Pressure relief vent Rated voltage (400V) 35 C Series name 0.8 +0.2-0.1 +0.2.1 Type .8 -0 1 00±0.1 Please contact to us if other configurations are required. 2-2φ±0.1 1.5+0.2-0.1 (PC board hole dimensions) (Terminal dimensions) The other terminal is also available upon request. Please refer page 272 for schematic of dimensions.Minimum order quantity : 50pcs. Dimension table in next page. CAT.8100Z
φD +1.5MAX. 4.0±0.5 2.5,ALUMINUM ELECTROLYTIC CAPACITORS QS series Dimensions
350V (2V) 400V (2G) Cap. Size Rated ripple Leakage Current Cap. Size Leakage Current φD × L(mm) Code Rated ripple Code (µF) (mA) (mA) (µF) φD × L(mm) (mA) (mA) 120 22 × 25 750 0.61 LQS2V121MELZ25 100 22 × 25 680 0.60 LQS2G101MELZ25 150 22 × 30 820 0.68 LQS2V151MELZ30 120 22 × 30 730 0.65 LQS2G121MELZ30 22 × 30 900 0.75 LQS2V181MELZ30 150 22 × 35 850 0.73 LQS2G151MELZ35 25 × 25 900 0.75 LQS2V181MELA25 22 × 35 950 0.80 LQS2G181MELZ35 22 × 35 1000 0.83 LQS2V221MELZ35 180 25 × 30 950 0.80 LQS2G181MELA30 25 × 30 1000 0.83 LQS2V221MELA30 30 × 25 950 0.80 LQS2G181MELB25 22 × 40 1100 0.92 LQS2V271MELZ40 22 × 45 1100 0.88 LQS2G221MELZ45 270 25 × 35 1100 0.92 LQS2V271MELA35 220 25 × 35 1100 0.88 LQS2G221MELA35 30 × 25 1100 0.92 LQS2V271MELB25 30 × 25 1100 0.88 LQS2G221MELB25 22 × 45 1200 1.01 LQS2V331MELZ45 22 × 50 1220 0.98 LQS2G271MELZ50 330 25 × 40 1200 1.01 LQS2V331MELA40 25 × 40 1220 0.98 LQS2G271MELA40 30 × 30 1200 1.01 LQS2V331MELB30 30 × 30 1220 0.98 LQS2G271MELB30 25 × 45 1300 1.10 LQS2V391MELA45 35 × 25 1220 0.98 LQS2G271MELC25 30 × 35 1300 1.10 LQS2V391MELB35 25 × 45 1440 1.08 LQS2G331MELA45 25 × 50 1400 1.21 LQS2V471MELA50 30 × 35 1440 1.08 LQS2G331MELB35 470 30 × 40 1400 1.21 LQS2V471MELB40 25 × 50 1550 1.18 LQS2G391MELA50 35 × 30 1400 1.21 LQS2V471MELC30 390 30 × 40 1550 1.18 LQS2G391MELB40 30 × 45 1500 1.32 LQS2V561MELB45 35 × 30 1550 1.18 LQS2G391MELC30 35 × 35 1500 1.32 LQS2V561MELC35 30 × 45 1680 1.30 LQS2G471MELB45 30 × 50 1700 1.46 LQS2V681MELB50 35 × 35 1680 1.30 LQS2G471MELC35 35 × 40 1700 1.46 LQS2V681MELC40 30 × 50 1900 1.41 LQS2G561MELB50 820 35 × 45 1900 1.60 LQS2V821MELC45 35 × 40 1900 1.41 LQS2G561MELC40 680 35 × 45 2120 1.56 LQS2G681MELC45 420V (W6) 450V (2W) Cap. Size Rated ripple Leakage Current Cap. Size Rated ripple Leakage Current (µF) φD × L(mm) Code(mA) (mA) (µF) φD × L(mm) Code(mA) (mA) 100 22 × 25 660 0.61 LQSW6101MELZ25 82 22 × 25 640 0.57 LQS2W820MELZ25 22 × 30 810 0.67 LQSW6121MELZ30 22 × 30 690 0.63 LQS2W101MELZ30 120 100 25 × 25 810 0.67 LQSW6121MELA25 25 × 25 690 0.63 LQS2W101MELA25 22 × 35 840 0.75 LQSW6151MELZ35 22 × 35 720 0.69 LQS2W121MELZ35 150 120 25 × 30 840 0.75 LQSW6151MELA30 25 × 30 720 0.69 LQS2W121MELA30 22 × 40 910 0.82 LQSW6181MELZ40 22 × 40 790 0.77 LQS2W151MELZ40 180 25 × 30 910 0.82 LQSW6181MELA30 150 25 × 30 790 0.77 LQS2W151MELA30 30 × 25 910 0.82 LQSW6181MELB25 30 × 25 790 0.77 LQS2W151MELB25 22 × 45 1050 0.91 LQSW6221MELZ45 22 × 45 870 0.85 LQS2W181MELZ45 220 25 × 35 1050 0.91 LQSW6221MELA35 180 25 × 35 870 0.85 LQS2W181MELA35 30 × 30 1050 0.91 LQSW6221MELB30 30 × 30 870 0.85 LQS2W181MELB30 25 × 40 1250 1.01 LQSW6271MELA40 25 × 40 1050 0.94 LQS2W221MELA40 270 30 × 30 1250 1.01 LQSW6271MELB30 220 30 × 30 1050 0.94 LQS2W221MELB30 35 × 25 1250 1.01 LQSW6271MELC25 35 × 25 1050 0.94 LQS2W221MELC25 25 × 50 1420 1.11 LQSW6331MELA50 25 × 50 1230 1.04 LQS2W271MELA50 330 30 × 35 1420 1.11 LQSW6331MELB35 270 30 × 35 1230 1.04 LQS2W271MELB35 35 × 30 1420 1.11 LQSW6331MELC30 35 × 30 1230 1.04 LQS2W271MELC30 30 × 40 1610 1.21 LQSW6391MELB40 30 × 40 1380 1.15 LQS2W331MELB40 390 330 35 × 35 1610 1.21 LQSW6391MELC35 35 × 35 1380 1.15 LQS2W331MELC35 30 × 45 1860 1.33 LQSW6471MELB45 30 × 50 1610 1.25 LQS2W391MELB50 470 390 35 × 40 1860 1.33 LQSW6471MELC40 35 × 40 1610 1.25 LQS2W391MELC40 560 35 × 45 2100 1.45 LQSW6561MELC45 470 35 × 45 1780 1.37 LQS2W471MELC45 680 35 × 50 2200 1.60 LQSW6681MELC50 560 35 × 50 1990 1.50 LQS2W561MELC50 Rated ripple current (mArms) at 105°C 120HzFrequency coefficient of rated ripple current
Frequency (Hz) 50 60 120 300 1k 10k 50k or more Coefficient 0.77 0.82 1.00 1.16 1.30 1.41 1.43CAT.8100Z
]15
Similar documents
ALUMINUM ELECTROLYTIC CAPACITORS PZ High Voltage, Smaller-sizedseries High ripple current. Load life of 2000 hours at 105°C. PT Suited for ballast applications. Compliant to the RoHS directive (2002/95/EC). Smaller PZ Specifications Item Performance Characteristics Category Temperature Range –25 to
PW Miniature Sized, Low lmpedance,High Reliability For Switching Power Suppliesseries Smaller case size and lower impedance than PM series. Low impedance and high reliability withstanding 2000 hours to 8000 hours. Capacitance ranges available based on the numerical values in E12 series under JIS. Co
ALUMINUM ELECTROLYTIC CAPACITORS PX Long Life Assuranceseries Load life of 20000 hours at 105°C. Compliant to the RoHS directive (2002/95/EC). PM Long Life PX Specifications Item Performance Characteristitcs Category Temperature Range –55 to +105˚C Rated Voltage Range 10 to 35V Rated Capacitance Ran
ALUMINUM ELECTROLYTIC CAPACITORS PV Miniature Sized, Low Impedance, High Reliabilityseries Miniature sized low impedance series withstanding 5000 hours load life at +105°C. Compliant to the RoHS directive (2002/95/EC). PJ Long Life PV Specifications Item Performance Characteristics Category Temperat
ALUMINUM ELECTROLYTIC CAPACITORS PT Miniature Sized, High Ripple Current, Long Lifeseries High ripple current. PB Suited for ballast application. Smaller Compliant to the RoHS directive (2002/95/EC). PT Smaller PZ Specifications Item Performance Characteristics Category Temperature Range –25 to +105
ALUMINUM ELECTROLYTIC CAPACITORS PS Miniature Sized, Low Impedance, For Switching Power Suppliesseries (Through 100V only) Wide temperature range type, miniature sized. Compliant to the RoHS directive (2002/95/EC). PJ Smaller PS Long Life TS Specifications Item Performance Characteristics Category T
MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS NW5 NW5 SERIES Bi-polar, 5mm Height ◆FEATURES ・RoHS compliance. ◆SPECIFICATIONS Items Characteristics Category Temperature Range －40～＋85℃ Rated Voltage Range 6.3～50V.DC Capacitance Tolerance ±20％（20℃，120Hz） I＝0.05CV or 10μA whichever is greater. (After 5 mi
MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS NA NA SERIES 85℃ Bi-polar Miniaturized ◆FEATURES ・RoHS compliance. ◆SPECIFICATIONS Items Characteristics Category Temperature Range －40～＋85℃ Rated Voltage Range 6.3～100V.DC Capacitance Tolerance ±20％（20℃，120Hz） I＝0.03CV or 3μA whichever is greater. (After 5
LARGE CAN TYPE ALUMINUM ELECTROLYTIC CAPACITORS MXY MXY SERIES Low Profile with Horizontal Mounting ◆FEATURES ・Load Life : 105℃ 3000 hours with horizontal mounting. ・Suitable for flat equipment design. ・RoHS compliance. ◆SPECIFICATIONS Items Characteristics Category Temperature Range －25～＋105℃ Rated
LARGE CAN TYPE ALUMINUM ELECTROLYTIC CAPACITORS MXH MXH SERIES 105℃ Ultra Miniaturized, Snap-in Terminal Type ◆FEATURES ・Load Life : 105℃ 2000 hours. ・Smaller size than MXG series. ・RoHS compliance. ◆SPECIFICATIONS Items Characteristics Category Temperature Range －25～＋105℃ Rated Voltage Range 400, 4
MXC SERIES 105℃ Standard, Snap-in Terminal Type ◆FEATURES ・Load Life : 105℃ 3000 hours. ・Smaller size with higher ripple current endurance than MXR series. ・RoHS compliance. ◆SPECIFICATIONS Items Characteristics Category Temperature Range －40～＋105℃ －25～＋105℃ Rated Voltage Range 10～100V.DC 160～450V.D
MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS MS5・MS7 MS5 SERIES MS7 SERIES 85℃ 5mm,7mm Height. ◆EATURES ・RoHS compliance. ◆SPECIFICATIONS Characteristics Items ＭＳ5 ＭＳ7 Category Temperature Range －40～＋85℃ Rated Voltage Range 4～50V.DC 4～63V.DC Capacitance Tolerance ±20％（20℃，120Hz） I＝0.01CV or 3μA whiche
MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS ML ML SERIES 105℃ Long Life, 5mm～9mm Height. ◆FEATURES ・Load Life : 105℃ 3000～5000hours. ・ RoHS compliance. ◆SPECIFICATIONS Items Characteristics Category Temperature Range －40～＋105℃ Rated Voltage Range 6.3～50V.DC Capacitance Tolerance ±20％（20℃，120Hz） I＝0.0
MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS MH7 MH7 SERIES 105℃ 7mm Height. ◆FEATURES ・RoHS compliance. ◆SPECIFICATIONS Items Characteristics ◆DIMENSIONS (mm) Category Temperature Range －40～＋105℃ SLEEVE φd Rated Voltage Range 6.3～50V.DC L+1MAX 15MIN 4MIN φD+0.5MAX Capacitance Tolerance ±20％（20℃，120Hz
MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS MH5 MH5 SERIES 105℃ 5mm Height. ◆FEATURES ◆SPECIFICATIONS
MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS MH5 MH5 SERIES 105℃ 5mm Height. ◆FEATURES ・RoHS compliance. ◆SPECIFICATIONS Items Characteristics ◆DIMENSIONS (mm) Category Temperature Range －40～＋105℃ SLEEVE φd Rated Voltage Range 6.3～50V.DC L+1.5MAX 15MIN 4MIN φD+0.5MAX Capacitance Tolerance ±20％（20℃，120
LARGE CAN TYPE ALUMINUM ELECTROLYTIC CAPACITORS KXF KXF SERIES UPGRADE 105℃ Low profile, Snap-in Terminal Type ◆FEATURES ・Load Life : 105℃ 3000 hours, with 20mm height. ・Smaller size with higher ripple current endurance than AXF series. ・RoHS compliance. ◆SPECIFICATIONS Items Characteristics Categor
LARGE CAN TYPE ALUMINUM ELECTROLYTIC CAPACITORS HXC HXC SERIES 105℃ High Ripple, Snap-in Terminal Type ◆FEATURES ・Load Life : 105℃ 2000 hours. ・Higher ripple current endurance than MXC series. ・RoHS compliance. ◆SPECIFICATIONS Items Characteristics Category Temperature Range －25～＋105℃ Rated Voltage
MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS CXW CXW SERIES 105℃ Long Life(5000 hours),Ultra Miniaturized ◆FEATURES ・Load Life : 105℃ 5000 hours. ・Body diameter of φ10mm to φ18mm with high ripple current capability. ・This series is smaller and longer life than the current KXW series. ・ RoHS compliance
MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS CFX CFX SERIES Load Life:105℃ 5000 hours. ◆FEATURES ・High Ripple Current ・For Electronic Ballast, Power Supply ・RoHS compliance. ◆SPECIFICATIONS Items Characteristics Category Temperature Range －25～＋105℃ Rated Voltage Range 200～400V.DC Capacitance Tolerance
MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS BXF BXF SERIES Load Life: 105℃ 10000 Hours. ◆FEATURES ・20mm height Max. ・High Ripple Current. ・For Electronic Ballast, Power Supply. ・RoHS compliance. ◆SPECIFICATIONS Items Characteristics Category Temperature Range －25～＋105℃ Rated Voltage Range 160～450V.DC
MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS BXC BXC SERIES Load Life:105℃ 8000～12000 hours. ◆FEATURES ・High Ripple Current ・For Electronic Ballast ・RoHS compliance. ◆SPECIFICATIONS Items Characteristics Category Temperature Range －25～＋105℃ Rated Voltage Range 160～500V.DC Capacitance Tolerance ±20％（20
MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS BXA BXA SERIES Load Life:105℃ 12000 hours.(φ10:10000 hours) ◆FEATURES ・High Ripple Current ・For Electronic Ballast, Power Supply ・RoHS compliance. BXA series will be discontinued in due course. In case of new design, the succeeding BXC series will be applie
MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS AX AX SERIES ◆FEATURES ・Miniaturized for AC-adapter of portable device. ・Load Life : 105℃ 1000hours. ・RoHS compliance. ◆SPECIFICATIONS Items Characteristics ◆DIMENSIONS （mm） Category スリーブ SLEEVE(PET) φd Temperature Range －40～＋105℃ Rated Voltage Range 400V.D
MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS ZT ZT SERIES Load Life: 125℃ 1000～4000hours. Low impedance. ◆FEATURES ・Low impedance at 100kHz with selected materials. ・Load Life : 125℃ 1000～4000hours. ・RoHS compliance. ◆SPECIFICATIONS Items Characteristics Category Temperature Range －40～＋125℃ Rated Volt
Radial Lead Type Series: NHG Type: A ■ Features ● Endurance : 105 °C 1000 h to 2000 h ● RoHS directive compliant ■ Specific ations Category Temp. Range –55 °C to +105 °C –25 °C to +105 °C Rated W.V. Range 6.3 V.DC to 100 V.DC 160 V.DC to 450 V.DC Nominal Cap. Range 0.1 µF to 22000 µF 1.0 µF to 330 µ
Aluminum Electrolytic Capacitors/ MD Snap-in Type Series: MD Type: TS ■ Features ● Endurance: 105 °C 2000h ● Improved safety for DC overvoltage ● RoHS directive compliant ■ Specific ations Category Temp. Range –40 °C to +105 °C –25 °C to +105 °C Rated W.V. Range 200 V.DC 400 V.DC Nominal Cap. Range
Radial Lead Type Series: M Type: A ■ Features ● Endurance : 85 °C 2000 h ● Smaller than series SU ● RoHS directive compliant ■ Specific ations Category Temp. Range –40 °C to + 85 °C –25 °C to +85 °C Rated W.V. Range 6.3 V.DC to 100 V.DC 160 V.DC to 450 V.DC Nominal Cap. Range 0.1 µF to 22000 µF 1 µF
Aluminum Electrolytic Capacitors/ KS-(Bi-polar) Radial Lead Type Series: KS(Bi-polar) Type: A ■ Features ● Endurance : 85° C 1000 h ● 5 mm height ● RoHS directive compliant ■ Specific ations Category Temp. Range –40 °C to +85 °C Rated W.V. Range 63 V.DC to 50 V.DC Nominal Cap. Range 0.1 µF to 47 µF
Aluminum Electrolytic Capacitors/ KS Radial Lead Type Low Profil e KS KSA5mm heightSeries: Type: KA 7 mm height ■ Features ● Endurance : 85° C 1000hM● 5 mm height ● RoHS directive compliant ■ Specific ations Category Temp. Range –40 °C to +85 °C Rated W.V. Range 4 V.DC to 50 V.DC Nominal Cap. Range
Aluminum Electrolytic Capacitors/ KA-(Bi-polar) Radial Lead Type Series: KA(Bi-polar) Type: A ■ Features ● Endurance : 85° C 1000 h ● 7 mm height ● RoHS directive compliant ■ Specific ations Category Temp. Range –40 °C to +85 °C Rated W.V. Range 4 V.DC to 50 V.DC Nominal Cap. Range 0.1 µF to 100 µF