Download: PZ High Voltage, Smaller-sizedseries

ALUMINUM ELECTROLYTIC CAPACITORS PZ High Voltage, Smaller-sizedseries

High ripple current. Load life of 2000 hours at 105°C. PT Suited for ballast applications. Compliant to the RoHS directive (2002/95/EC). Smaller

PZ Specifications

Item Performance Characteristics Category Temperature Range –25 to +105°C Rated Voltage Range 200 to 450V Rated Capacitance Range 18 to 470µF Capacitance Tolerance ±20% at 120Hz, 20°C Leakage Current After 1 minute's application of rated voltage, leakage current is not more than 0.04CV+100 (µA). Measurement frequency : 120Hz, Temperature : 20°C Tangent of loss angle (tan δ) Rated voltage (V) 200 400 420 450 tan δ (MAX.) 0.12 0.15 0.20 0.20 Measurement frequency : 120Hz Stability at Low Temperature Rated voltage (V) 200 400 420 450 Impedance ratio ZT / Z20 (MAX.) Z–25°C / Z+20°C3888The specifications listed at right shall be met when the Capacitance change °C Within ±20% of the initial capacitance valuecapacitors are restored to 20 after D.C. bias plus rated Endurance tan δ 200% or less than the initial specified value ripple current is applied for 2000 hours at 105°C, the peak Leakage current Less than or equal to the initial specified value voltage shall not exceed the rated voltage. After storing the capacitors under no load at 105˚C for 1000 hours and then performing voltage treatment based on JIS C Shelf Life 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. Marking Printed with white color letter on dark brown sleeve.

Radial Lead Type Type numbering system (Example : 200V 220µF)

12345678910 11 12φdUPZ2D221MHDTSleeve (P.E.T.) Size code Configuration Capacitance tolerance (± 20%) Rated capacitance (220µF) Rated voltage (200V) L+ 2.0 MAX. 15MIN 4MIN Series namePressure relief vent Type ConfigurationφDPb-free leadwire(mm) Pb-free PET sleeve φD 10 12.5 16 18 10 PD P 5.0 5.0 7.5 7.5 12.5 to 18 HD φd 0.6 0.8 0.8 0.8 • Please refer to page 20 about the end seal configulation. Please refer to page 20, 21, 22 about the formed or taped product spec. Please refer to page 4 for the minimum order quantity. Dimension table in next page.

CAT.8100Z

φD±0.5 MAX. P±0.5,

ALUMINUM ELECTROLYTIC CAPACITORS PZ series Dimensions

V 200 400 420 450 Cap.(µF) Code 2D 2G W6 2W 18 180 .010 × 31.5 180 22 220 .010 × 31.5 200 27 270 .010 × 31.5 240 33 330 12.5 × 31.5 280 39 390 12.5 × 31.5 310 12.5 × 35.5 320 47 470 12.5 × 31.5 370 12.5 × 35.5 360 12.5 × 40.0 380 56 560 12.5 × 35.5 420 12.5 × 40.0 430 .016 × 31.5 440 68 680 12.5 × 40.0 480 .016 × 31.5 510 .016 × 35.5 490 .016 × 40.0 550 82 820 .010 × 31.5 400 .016 × 35.5 570 .018 × 31.5 550 .016 × 40.0 610 100 101 .016 × 31.5 580 .018 × 35.5 650 .018 × 31.5 610 .016 × 35.5 670 120 121 .018 × 35.5 660 .018 × 40.0 740 .018 × 31.5 670 .016 × 40.0 770 150 151 12.5 × 31.5 620 .018 × 40.0 710 .018 × 35.5 770 180 181 12.5 × 35.5 700 .018 × 40.0 880 220 221 12.5 × 40.0 800 270 271 .016 × 31.5 870 .016 × 35.5 1010 330 331 .018 × 31.5 1010 .016 × 40.0 1130 390 391 .018 × 35.5 1120 470 471 .018 × 40.0 1270 Case sizeφD× L (mm) Rated ripple Rated ripple current (mArms) at 105°C 120Hz : In this case, 6 will be put at 12th digit of type numbering system.

Frequency coefficient of rated ripple current

V 60Hz 120Hz 500Hz 1kHz 10kHz or more 200 0.80 1.00 1.20 1.30 1.40 400 to 450 0.80 1.00 1.25 1.40 1.50

CAT.8100Z

]

15