Download: Radial Lead Type ■ Features ■ Specific ations

Radial Lead Type Series: FC Type: A ■ Features ● Endurance : 105 °C 1000 h to 5000 h ● Low impedance ● RoHS directive compliant ■ Specific ations Category Temp. Range –55 °C to +105 °C Rated W.V. Range 6.3 V.DC to 100 V.DC Nominal Cap. Range 1.0 µF to 15000 µF Capacitance Tolerance ±20 % (120 Hz/+20 °C) DC Leakage Curr ent I < 0.01 CV or 3 (µA) After 2 minutes (Whichever is greater) W.V. (V) 6.3 10 16 25 35 50 63 100 (120 Hz/+20 °C) tan δ tan δ 0.22 0.19 0.16 0.14 0.12 0.10 0.08 0.07 For capacitance value > 1000 µF, add 0.02 per every 1000 µF. After following life test with DC voltage and +105...
Author: Opead1952 Shared: 8/19/19
Downloads: 962 Views: 4170

Content

Radial Lead Type

Series: FC Type: A ■ Features ● Endurance : 105 °C 1000 h to 5000 h ● Low impedance ● RoHS directive compliant ■ Specific ations Category Temp. Range –55 °C to +105 °C Rated W.V. Range 6.3 V.DC to 100 V.DC Nominal Cap. Range 1.0 µF to 15000 µF Capacitance Tolerance ±20 % (120 Hz/+20 °C) DC Leakage Curr ent I < 0.01 CV or 3 (µA) After 2 minutes (Whichever is greater) W.V. (V) 6.3 10 16 25 35 50 63 100 (120 Hz/+20 °C) tan δ tan δ 0.22 0.19 0.16 0.14 0.12 0.10 0.08 0.07 For capacitance value > 1000 µF, add 0.02 per every 1000 µF. After following life test with DC voltage and +105 °C±2 °C ripple current value applied (The sum of DC and ripple peak voltage shall not exceed the rated working voltage) when the capacitors are restored to 20 °C, the capacitors shall meet the limits specifi ed bellow. Duration : φ4 to φ6.3: 1000 hours, φ8: 2000 hours , φ10: 3000 hours , φ12.5 to φ18: 5000 hours Endurance Capacitance change ±20 % of initial measured value tan δ < 200 % of initial specifi ed value DC leakage current < initial specifi ed value Shelf Life After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized at +20 °C,capacitors shall meet the limits specifi ed in Endurance. (With voltage treatment) ■ Frequency correction factor for ripple current Frequency (Hz) W.V.(V.DC) Cap (µF) 60 1201k10 k 100 k 1.0 to 330 0.55 0.65 0.85 0.90 1.00 390 to 1000 0.70 0.75 0.90 0.95 1.00 6.3 to 100 1200 to 2200 0.75 0.80 0.90 0.95 1.00 2700 to 15000 0.80 0.85 0.95 1.00 1.00 ■ Dim ens ions in mm (not to scale) [mm] Sleeve φ4 to φ8 φ10< Pressure relief φd±0.05 φ6.3< + But exclude 7 mm – height L✽ 14 min. 3 min. φD±0.5 φD±0.5 ✽L<16 : L±1.0 ± (✽φ815, φ1615, φ1815 : L±1.5)L>20 : L 2.0 (mm) L>11 L=7 Body Dia. φD456.3 8 10 12.5 16 18456.3 Body Length L 15 to 25 30 to 40 Lead Dia. φd 0.45 0.5 0.5 0.6 0.6 0.6 0.8 0.8 0.8 0.45 0.45 0.45 Lead space F 1.5 2.0 2.5 3.5 5.0 5.0 5.0 7.5 7.5 1.5 2.0 2.5 – EE81 – F±0.5, ■ Case size/ Impedance/ Ripple Current W.V(V.DC) 6.3 V to 35 V 50 V 63 V 100 V Imped ance Ripple Imped ance Ripple Imped ance Ripple Imped ance Ripple Case size ()/(100 kHz) Current ()/(100 kHz) Current ()/(100 kHz) Current ()/(100 kHz) Current (φDL) (mA r.m.s) (mA r.m.s) (mA r.m.s) (mA r.m.s) 20 °C –10 °C /(100 kHz) 20 °C –10 °C /(100 kHz) 20 °C –10 °C /(100 kHz) 20 °C –10 °C /(100 kHz) 4 7 2.00 5.00 65570.950 2.40 120 6.3 7 0.450 1.20 200 4 11 1.30 2.60 120 2.50 5.00 90 3.50 7.00 80 2.40 ✽1 4.80 ✽1 ✽3 5 11 0.800 1.60 175 2.00 4.00 145 4.10 8.20 80 ✽2, ✽3 ✽2, ✽3 ✽3 5 15 0.500 1.00 235 0.900 1.80 215 1.30 2.60 200 2.80 5.60 90 6.3 11.2 0.350 0.700 290 0.600 1.20 260 1.00 2.00 240 1.80 3.60 114 6.3 15 0.250 0.500 400 0.400 0.800 360 0.700 1.40 330 1.10 2.20 155 8 11.5 0.117 0.234 555 0.234 0.468 485 0.342 0.684 405 0.680 1.36 260 8 15 0.085 0.170 730 0.155 0.310 635 0.230 0.460 535 0.450 0.900 340 8 20 0.065 0.130 995 0.120 0.240 860 0.178 0.356 690 0.330 0.660 455 10 12.5 0.090 0.180 755 0.162 0.324 615 0.256 0.512 535 0.530 1.06 306 10 16 0.068 0.136 1050 0.119 0.238 850 0.194 0.388 600 0.360 0.720 400 10 20 0.052 0.104 1220 0.090 0.180 1030 0.147 0.294 885 0.240 0.480 463 10 25 0.045 0.090 1440 0.082 0.164 1200 0.130 0.260 1050 0.210 0.420 599 10 30 0.035 0.070 1815 0.060 0.120 1610 0.090 0.180 1300 0.150 0.300 698 12.5 15 0.065 0.130 1205 0.110 0.220 1150 0.150 0.300 1020 0.230 0.460 511 12.5 20 0.038 0.076 1655 0.063 0.126 1480 0.085 0.170 1285 0.180 0.360 671 12.5 25 0.030 0.060 1945 0.050 0.100 1832 0.070 0.140 1720 0.110 0.220 807 12.5 30 0.025 0.050 2310 0.040 0.080 2215 0.055 0.110 2090 0.098 0.196 937 12.5 35 0.022 0.044 2510 0.034 0.068 2285 0.047 0.094 2265 0.087 0.174 1040 12.5 40 0.018 0.036 2655 0.030 0.060 2590 0.042 0.084 2560 0.072 0.144 1130 16 15 0.043 0.086 1690 0.080 0.160 1610 0.090 0.180 1410 0.140 0.280 793 16 20 0.029 0.058 2205 0.048 0.096 1835 0.059 0.118 1765 0.110 0.220 995 16 25 0.022 0.044 2555 0.034 0.068 2235 0.050 0.100 2160 0.089 0.178 1170 16 31.5 0.018 0.036 3010 0.028 0.056 2700 0.043 0.086 2670 0.062 0.124 1520 16 35.5 0.016 0.032 3150 0.025 0.050 2790 0.036 0.072 2770 0.053 0.106 1730 16 40 0.015 0.030 3360 0.023 0.046 2845 0.030 0.060 2825 0.047 0.094 1920 18 15 0.038 0.076 2000 0.068 0.136 1900 0.086 0.172 1690 0.120 0.240 917 18 20 0.028 0.056 2490 0.042 0.084 2420 0.055 0.110 2290 0.080 0.160 1230 18 25 0.020 0.040 2740 0.029 0.058 2610 0.043 0.086 2585 0.070 0.140 1420 18 31.5 0.016 0.032 3635 0.025 0.050 3000 0.032 0.064 2950 0.062 0.124 1600 18 35.5 0.015 0.030 3680 0.023 0.046 3100 0.030 0.060 3095 0.041 0.082 1770 18 40 0.014 0.028 3735 – – – 0.025 0.050 3205 0.036 0.072 2300 ✽1 : Apply to 1 µF ✽2 : Apply to 2.2, 3.3, 4.7, 10L, 12, 18 and 22 µF ✽3 Case size Capacitance Imped ance ()/(100 kHz) Ripple Current (φDL) (µF) 20 °C –10 °C (mA r.m.s)(100 kHz) 1.0 2.40 4.80 20 2.2 1.80 3.60 45 3.3 1.30 2.60 65 4.7 1.30 2.60 95 5 11 10L 1.30 2.60 125 12 1.30 2.60 135 15 1.30 2.60 145 18 1.30 2.60 155 22 1.30 2.60 155 – EE82 –, Cap. Ripple Imped- Endur- Lead Lead SpaceW.V. (±20 %) Dia. Length Current ance ance Dia. Straight(100 kHz) (100 kHz) Part No. TapingStraight Taping Taping Leads 274765 2.000 1000 0.45 1.5 5.0 2.5 EEAFC0J270( ) 200 2000 5657120 0.950 1000 0.45 2.0 5.0 2.5 EEAFC0J560( ) 200 2000 68 4 11 120 1.300 1000 0.45 1.5 5.0 2.5 EEUFC0J680( ) 200 2000 100 5 11 175 0.800 1000 0.50 2.0 5.0 2.5 EEUFC0J101( ) 200 2000 120 6.3 7 200 0.450 1000 0.45 2.5 5.0 2.5 EEAFC0J121( ) 200 2000 150 5 15 235 0.500 1000 0.50 2.0 5.0 2.5 EEUFC0J151( ) 200 2000 220 6.3 11.2 290 0.350 1000 0.50 2.5 5.0 2.5 EEUFC0J221( ) 200 2000 270 6.3 11.2 290 0.350 1000 0.50 2.5 5.0 2.5 EEUFC0J271( ) 200 2000 6.3 11.2 290 0.350 1000 0.50 2.5 5.0 2.5 EEUFC0J331S( ) 200 2000 6.3 15 400 0.250 1000 0.50 2.5 5.0 2.5 EEUFC0J331( ) 200 2000 390 8 11.5 555 0.117 2000 0.60 3.5 5.0 EEUFC0J391( ) 200 1000 470 8 11.5 555 0.117 2000 0.60 3.5 5.0 EEUFC0J471( ) 200 1000 560 8 11.5 555 0.117 2000 0.60 3.5 5.0 EEUFC0J561( ) 200 1000 8 15 730 0.085 2000 0.60 3.5 5.0 EEUFC0J821L( ) 200 1000 10 12.5 755 0.090 3000 0.60 5.0 5.0 EEUFC0J821( ) 200 500 1000 10 12.5 755 0.090 3000 0.60 5.0 5.0 EEUFC0J102( ) 200 500 8 20 995 0.065 2000 0.60 3.5 5.0 EEUFC0J122L( ) 200 1000 10 16 1050 0.068 3000 0.60 5.0 5.0 EEUFC0J122( ) 200 500 10 20 1220 0.052 3000 0.60 5.0 5.0 EEUFC0J152( ) 200 500 12.5 15 1205 0.065 5000 0.60 5.0 5.0 EEUFC0J152S( ) 200 500 1800 10 25 1440 0.045 3000 0.60 5.0 5.0 EEUFC0J182( ) 200 500 6.3 10 25 1440 0.045 3000 0.60 5.0 5.0 EEUFC0J222( ) 200 500 16 15 1690 0.043 5000 0.80 7.5 7.5 EEUFC0J222S( ) 100 250 10 30 1815 0.035 3000 0.60 5.0 EEUFC0J272L 100 2700 12.5 20 1655 0.038 5000 0.60 5.0 5.0 EEUFC0J272( ) 200 500 16 15 1690 0.043 5000 0.80 7.5 7.5 EEUFC0J272S( ) 100 250 12.5 20 1655 0.038 5000 0.60 5.0 5.0 EEUFC0J332( ) 200 500 18 15 2000 0.038 5000 0.80 7.5 7.5 EEUFC0J332S( ) 100 250 3900 12.5 25 1945 0.030 5000 0.60 5.0 5.0 EEUFC0J392( ) 200 500 12.5 30 2310 0.025 5000 0.80 5.0 EEUFC0J472 100 16 20 2205 0.029 5000 0.80 7.5 7.5 EEUFC0J472S( ) 100 250 12.5 35 2510 0.022 5000 0.80 5.0 EEUFC0J562L 100 16 20 2205 0.029 5000 0.80 7.5 7.5 EEUFC0J562( ) 100 250 12.5 40 2655 0.018 5000 0.80 5.0 EEUFC0J682L 100 6800 16 25 2555 0.022 5000 0.80 7.5 7.5 EEUFC0J682( ) 100 250 18 20 2490 0.028 5000 0.80 7.5 7.5 EEUFC0J682S( ) 100 250 8200 16 31.5 3010 0.018 5000 0.80 7.5 EEUFC0J822 100 16 35.5 3150 0.016 5000 0.80 7.5 EEUFC0J103 100 18 25 2740 0.020 5000 0.80 7.5 7.5 EEUFC0J103S( ) 100 250 16 40 3360 0.015 5000 0.80 7.5 EEUFC0J123L 100 18 31.5 3635 0.016 5000 0.80 7.5 EEUFC0J123 50 15000 18 35.5 3680 0.015 5000 0.80 7.5 EEUFC0J153 50 – EE83 –, Cap. Ripple Imped- Endur- Lead Lead SpaceW.V. (±20 %) Dia. Length Current ance ance Dia. Straight(100 kHz) (100 kHz) Straight Taping Taping Part No. Leads Taping 224765 2.000 1000 0.45 1.5 5.0 2.5 EEAFC1A220( ) 200 2000 3957120 0.950 1000 0.45 2.0 5.0 2.5 EEAFC1A390( ) 200 2000 47 4 11 120 1.300 1000 0.45 1.5 5.0 2.5 EEUFC1A470( ) 200 2000 5 11 175 0.800 1000 0.50 2.0 5.0 2.5 EEUFC1A820( ) 200 2000 6.3 7 200 0.450 1000 0.45 2.5 5.0 2.5 EEAFC1A820( ) 200 2000 5 11 175 0.800 1000 0.50 2.0 5.0 2.5 EEUFC1A101S( ) 200 2000 5 15 235 0.500 1000 0.50 2.0 5.0 2.5 EEUFC1A101( ) 200 2000 150 6.3 11.2 290 0.350 1000 0.50 2.5 5.0 2.5 EEUFC1A151( ) 200 2000 180 6.3 11.2 290 0.350 1000 0.50 2.5 5.0 2.5 EEUFC1A181( ) 200 2000 6.3 11.2 290 0.350 1000 0.50 2.5 5.0 2.5 EEUFC1A221S( ) 200 2000 6.3 15 400 0.250 1000 0.50 2.5 5.0 2.5 EEUFC1A221( ) 200 2000 330 8 11.5 555 0.117 2000 0.60 3.5 5.0 EEUFC1A331( ) 200 1000 390 8 11.5 555 0.117 2000 0.60 3.5 5.0 EEUFC1A391( ) 200 1000 470 8 11.5 555 0.117 2000 0.60 3.5 5.0 EEUFC1A471( ) 200 1000 560 10 12.5 755 0.090 3000 0.60 5.0 5.0 EEUFC1A561( ) 200 500 8 15 730 0.085 2000 0.60 3.5 5.0 EEUFC1A681L( ) 200 1000 10 12.5 755 0.090 3000 0.60 5.0 5.0 EEUFC1A681( ) 200 500 820 10 16 1050 0.068 3000 0.60 5.0 5.0 EEUFC1A821( ) 200 500 8 20 995 0.065 2000 0.60 3.5 5.0 EEUFC1A102L( ) 200 1000 10 16 1050 0.068 3000 0.60 5.0 5.0 EEUFC1A102( ) 200 500 10 20 1220 0.052 3000 0.60 5.0 5.0 EEUFC1A122( ) 200 500 10 12.5 15 1205 0.065 5000 0.60 5.0 5.0 EEUFC1A122S( ) 200 500 1500 10 25 1440 0.045 3000 0.60 5.0 5.0 EEUFC1A152( ) 200 500 12.5 20 1655 0.038 5000 0.60 5.0 5.0 EEUFC1A182( ) 200 500 16 15 1690 0.043 5000 0.80 7.5 7.5 EEUFC1A182S( ) 100 250 10 30 1815 0.035 3000 0.60 5.0 EEUFC1A222L 100 12.5 20 1655 0.038 5000 0.60 5.0 5.0 EEUFC1A222( ) 200 500 12.5 25 1945 0.030 5000 0.60 5.0 5.0 EEUFC1A272( ) 200 500 18 15 2000 0.038 5000 0.80 7.5 7.5 EEUFC1A272S( ) 100 250 12.5 30 2310 0.025 5000 0.80 5.0 EEUFC1A332 100 16 20 2205 0.029 5000 0.80 7.5 7.5 EEUFC1A332S( ) 100 250 12.5 35 2510 0.022 5000 0.80 5.0 EEUFC1A392L 100 16 20 2205 0.029 5000 0.80 7.5 7.5 EEUFC1A392( ) 100 250 12.5 40 2655 0.018 5000 0.80 5.0 EEUFC1A472L 100 16 25 2555 0.022 5000 0.80 7.5 7.5 EEUFC1A472( ) 100 250 16 25 2555 0.022 5000 0.80 7.5 7.5 EEUFC1A562( ) 100 250 18 20 2490 0.028 5000 0.80 7.5 7.5 EEUFC1A562S( ) 100 250 16 31.5 3010 0.018 5000 0.80 7.5 EEUFC1A682 100 18 25 2740 0.020 5000 0.80 7.5 7.5 EEUFC1A682S( ) 100 250 16 35.5 3150 0.016 5000 0.80 7.5 EEUFC1A822L 100 18 31.5 3635 0.016 5000 0.80 7.5 EEUFC1A822 50 10000 18 35.5 3680 0.015 5000 0.80 7.5 EEUFC1A103 50 12000 18 40 3735 0.014 5000 0.80 7.5 EEUFC1A123 50 – EE84 –, Cap. Ripple Imped- Endur- Lead Lead SpaceW.V. (±20 %) Dia. Length Current ance ance Dia. Straight(100 kHz) (100 kHz) Straight Taping Taping Part No. Leads Taping 154765 2.000 1000 0.45 1.5 5.0 2.5 EEAFC1C150( ) 200 2000 2757120 0.950 1000 0.45 2.0 5.0 2.5 EEAFC1C270( ) 200 2000 39 4 11 120 1.30 1000 0.45 1.5 5.0 2.5 EEUFC1C390( ) 200 2000 47 5 11 175 0.800 1000 0.50 2.0 5.0 2.5 EEUFC1C470( ) 200 2000 5 11 175 0.800 1000 0.50 2.0 5.0 2.5 EEUFC1C560( ) 200 2000 6.3 7 200 0.450 1000 0.45 2.5 5.0 2.5 EEAFC1C560( ) 200 2000 68 5 11 175 0.800 1000 0.50 2.0 5.0 2.5 EEUFC1C680( ) 200 2000 82 5 15 235 0.500 1000 0.50 2.0 5.0 2.5 EEUFC1C820( ) 200 2000 100 6.3 11.2 290 0.350 1000 0.50 2.5 5.0 2.5 EEUFC1C101( ) 200 2000 120 6.3 11.2 290 0.350 1000 0.50 2.5 5.0 2.5 EEUFC1C121( ) 200 2000 180 6.3 15 400 0.250 1000 0.50 2.5 5.0 2.5 EEUFC1C181( ) 200 2000 220 8 11.5 555 0.117 2000 0.60 3.5 5.0 EEUFC1C221( ) 200 1000 270 8 11.5 555 0.117 2000 0.60 3.5 5.0 EEUFC1C271( ) 200 1000 330 8 11.5 555 0.117 2000 0.60 3.5 5.0 EEUFC1C331( ) 200 1000 390 10 12.5 755 0.090 3000 0.60 5.0 5.0 EEUFC1C391( ) 200 500 8 15 730 0.085 2000 0.60 3.5 5.0 EEUFC1C471L( ) 200 1000 10 12.5 755 0.090 3000 0.60 5.0 5.0 EEUFC1C471( ) 200 500 560 10 16 1050 0.068 3000 0.60 5.0 5.0 EEUFC1C561( ) 200 500 8 20 995 0.065 2000 0.60 3.5 5.0 EEUFC1C681L( ) 200 1000 10 16 1050 0.068 3000 0.60 5.0 5.0 EEUFC1C681( ) 200 500 10 20 1220 0.052 3000 0.60 5.0 5.0 EEUFC1C821( ) 200 500 12.5 15 1205 0.065 5000 0.60 5.0 5.0 EEUFC1C821S( ) 200 500 16 10 20 1220 0.052 3000 0.60 5.0 5.0 EEUFC1C102S( ) 200 500 10 25 1440 0.045 3000 0.60 5.0 5.0 EEUFC1C102( ) 200 500 10 25 1440 0.045 3000 0.60 5.0 5.0 EEUFC1C122( ) 200 500 16 15 1690 0.043 5000 0.80 7.5 7.5 EEUFC1C122S( ) 100 250 10 30 1815 0.035 3000 0.60 5.0 EEUFC1C152L 100 1500 12.5 20 1655 0.038 5000 0.60 5.0 5.0 EEUFC1C152( ) 200 500 16 15 1690 0.043 5000 0.80 7.5 7.5 EEUFC1C152S( ) 100 250 12.5 25 1945 0.030 5000 0.60 5.0 5.0 EEUFC1C182( ) 200 500 18 15 2000 0.038 5000 0.80 7.5 7.5 EEUFC1C182S( ) 100 250 12.5 25 1945 0.030 5000 0.60 5.0 5.0 EEUFC1C222( ) 200 500 16 20 2205 0.029 5000 0.80 7.5 7.5 EEUFC1C222S( ) 100 250 12.5 30 2310 0.025 5000 0.80 5.0 EEUFC1C272L 100 16 20 2205 0.029 5000 0.80 7.5 7.5 EEUFC1C272( ) 100 250 12.5 35 2510 0.022 5000 0.80 5.0 EEUFC1C332 100 18 20 2490 0.028 5000 0.80 7.5 7.5 EEUFC1C332S( ) 100 250 16 25 2555 0.022 5000 0.80 7.5 7.5 EEUFC1C392( ) 100 250 18 20 2490 0.028 5000 0.80 7.5 7.5 EEUFC1C392S( ) 100 250 16 31.5 3010 0.018 5000 0.80 7.5 EEUFC1C472 100 18 25 2740 0.020 5000 0.80 7.5 7.5 EEUFC1C472S( ) 100 250 16 35.5 3150 0.016 5000 0.80 7.5 EEUFC1C562L 100 18 31.5 3635 0.016 5000 0.80 7.5 EEUFC1C562 50 6800 16 40 3360 0.015 5000 0.80 7.5 EEUFC1C682 100 8200 18 35.5 3680 0.015 5000 0.80 7.5 EEUFC1C822 50 – EE85 –, Cap. Ripple Imped- Endur- Lead Lead SpaceW.V. (±20 %) Dia. Length Current ance ance Dia. Part No. Straight(100 kHz) (100 kHz) Straight Taping Taping Leads Taping 104765 2.000 1000 0.45 1.5 5.0 2.5 EEAFC1E100( ) 200 2000 2257120 0.950 1000 0.45 2.0 5.0 2.5 EEAFC1E220( ) 200 2000 27 4 11 120 1.30 1000 0.45 1.5 5.0 2.5 EEUFC1E270( ) 200 2000 5 11 175 0.800 1000 0.50 2.0 5.0 2.5 EEUFC1E390( ) 200 2000 6.3 7 200 0.450 1000 0.45 2.5 5.0 2.5 EEAFC1E390( ) 200 2000 47 5 11 175 0.800 1000 0.50 2.0 5.0 2.5 EEUFC1E470( ) 200 2000 56 5 15 235 0.500 1000 0.50 2.0 5.0 2.5 EEUFC1E560( ) 200 2000 82 6.3 11.2 290 0.350 1000 0.50 2.5 5.0 2.5 EEUFC1E820( ) 200 2000 100 6.3 11.2 290 0.350 1000 0.50 2.5 5.0 2.5 EEUFC1E101S( ) 200 2000 120 6.3 15 400 0.250 1000 0.50 2.5 5.0 2.5 EEUFC1E121( ) 200 2000 180 8 11.5 555 0.117 2000 0.60 3.5 5.0 EEUFC1E181( ) 200 1000 220 8 11.5 555 0.117 2000 0.60 3.5 5.0 EEUFC1E221( ) 200 1000 270 10 12.5 755 0.090 3000 0.60 5.0 5.0 EEUFC1E271( ) 200 500 8 15 730 0.085 2000 0.60 3.5 5.0 EEUFC1E331L( ) 200 1000 10 12.5 755 0.090 3000 0.60 5.0 5.0 EEUFC1E331( ) 200 500 390 10 16 1050 0.068 3000 0.60 5.0 5.0 EEUFC1E391( ) 200 500 8 20 995 0.065 2000 0.60 3.5 5.0 EEUFC1E471L( ) 200 1000 10 16 1050 0.068 3000 0.60 5.0 5.0 EEUFC1E471( ) 200 500 10 20 1220 0.052 3000 0.60 5.0 5.0 EEUFC1E561( ) 200 500 12.5 15 1205 0.065 5000 0.60 5.0 5.0 EEUFC1E561S( ) 200 500 25 680 10 20 1220 0.052 3000 0.60 5.0 5.0 EEUFC1E681( ) 200 500 10 25 1440 0.045 3000 0.60 5.0 5.0 EEUFC1E821( ) 200 500 12.5 20 1655 0.038 5000 0.60 5.0 5.0 EEUFC1E821S( ) 200 500 10 30 1815 0.035 3000 0.60 5.0 EEUFC1E102L 100 1000 12.5 20 1655 0.038 5000 0.60 5.0 5.0 EEUFC1E102( ) 200 500 16 15 1690 0.043 5000 0.80 7.5 7.5 EEUFC1E102S( ) 100 250 12.5 25 1945 0.030 5000 0.60 5.0 5.0 EEUFC1E122( ) 200 500 18 15 2000 0.038 5000 0.80 7.5 7.5 EEUFC1E122S( ) 100 250 12.5 25 1945 0.030 5000 0.60 5.0 5.0 EEUFC1E152( ) 200 500 16 20 2205 0.029 5000 0.80 7.5 7.5 EEUFC1E152S( ) 100 250 12.5 30 2310 0.025 5000 0.80 5.0 EEUFC1E182L 100 16 20 2205 0.029 5000 0.80 7.5 7.5 EEUFC1E182( ) 100 250 12.5 35 2510 0.022 5000 0.80 5.0 EEUFC1E222 100 18 20 2490 0.028 5000 0.80 7.5 7.5 EEUFC1E222S( ) 100 250 2700 16 25 2555 0.022 5000 0.80 7.5 7.5 EEUFC1E272( ) 100 250 16 31.5 3010 0.018 5000 0.80 7.5 EEUFC1E332 100 18 25 2740 0.020 5000 0.80 7.5 7.5 EEUFC1E332S( ) 100 250 16 35.5 3150 0.016 5000 0.80 7.5 EEUFC1E392L 100 18 31.5 3635 0.016 5000 0.80 7.5 EEUFC1E392 50 4700 18 35.5 3680 0.015 5000 0.80 7.5 EEUFC1E472 50 5600 18 40 3735 0.014 5000 0.80 7.5 EEUFC1E562 50 – EE86 –, Cap. Ripple Imped- Endur- Lead Lead SpaceW.V. (±20 %) Dia. Length Current ance ance Dia. Straight(100 kHz) (100 kHz) Part No. TapingStraight Taping Taping Leads 6.84765 2.000 1000 0.45 1.5 5.0 2.5 EEAFC1V6R8( ) 200 2000 1257120 0.950 1000 0.45 2.0 5.0 2.5 EEAFC1V120( ) 200 2000 18 4 11 120 1.300 1000 0.45 1.5 5.0 2.5 EEUFC1V180( ) 200 2000 22 5 11 175 0.800 1000 0.50 2.0 5.0 2.5 EEUFC1V220( ) 200 2000 5 11 175 0.800 1000 0.50 2.0 5.0 2.5 EEUFC1V270( ) 200 2000 6.3 7 200 0.450 1000 0.45 2.5 5.0 2.5 EEAFC1V270( ) 200 2000 33 5 11 175 0.080 1000 0.50 2.0 5.0 2.5 EEUFC1V330( ) 200 2000 39 5 15 235 0.500 1000 0.50 2.0 5.0 2.5 EEUFC1V390( ) 200 2000 47 6.3 11.2 290 0.350 1000 0.50 2.5 5.0 2.5 EEUFC1V470( ) 200 2000 56 6.3 11.2 290 0.350 1000 0.50 2.5 5.0 2.5 EEUFC1V560( ) 200 2000 68 6.3 11.2 290 0.350 1000 0.50 2.5 5.0 2.5 EEUFC1V680( ) 200 2000 82 6.3 15 400 0.250 1000 0.50 2.5 5.0 2.5 EEUFC1V820( ) 200 2000 100 8 11.5 555 0.117 2000 0.60 3.5 5.0 EEUFC1V101( ) 200 1000 120 8 11.5 555 0.117 2000 0.60 3.5 5.0 EEUFC1V121( ) 200 1000 150 8 11.5 555 0.117 2000 0.60 3.5 5.0 EEUFC1V151( ) 200 1000 180 10 12.5 755 0.090 3000 0.60 5.0 5.0 EEUFC1V181( ) 200 500 8 15 730 0.085 2000 0.60 3.5 5.0 EEUFC1V221L( ) 200 1000 10 12.5 755 0.090 3000 0.60 5.0 5.0 EEUFC1V221( ) 200 500 270 10 16 1050 0.068 3000 0.60 5.0 5.0 EEUFC1V271( ) 200 500 8 20 995 0.065 2000 0.60 3.5 5.0 EEUFC1V331L( ) 200 1000 10 16 1050 0.068 3000 0.60 5.0 5.0 EEUFC1V331( ) 200 500 10 20 1220 0.052 3000 0.60 5.0 5.0 EEUFC1V391( ) 200 500 12.5 15 1205 0.065 5000 0.60 5.0 5.0 EEUFC1V391S( ) 200 500 35 470 10 20 1220 0.052 3000 0.60 5.0 5.0 EEUFC1V471( ) 200 500 10 25 1440 0.045 3000 0.60 5.0 5.0 EEUFC1V561( ) 200 500 12.5 20 1655 0.038 5000 0.60 5.0 5.0 EEUFC1V561S( ) 200 500 10 30 1815 0.035 3000 0.60 5.0 EEUFC1V681L 100 680 12.5 20 1655 0.038 5000 0.60 5.0 5.0 EEUFC1V681( ) 200 500 16 15 1690 0.043 5000 0.80 7.5 7.5 EEUFC1V681S( ) 100 250 12.5 25 1945 0.030 5000 0.60 5.0 5.0 EEUFC1V821L( ) 200 500 18 15 2000 0.038 5000 0.80 7.5 7.5 EEUFC1V821( ) 100 250 12.5 25 1945 0.030 5000 0.60 5.0 5.0 EEUFC1V102( ) 200 500 16 20 2205 0.029 5000 0.80 7.5 7.5 EEUFC1V102S( ) 100 250 12.5 30 2310 0.025 5000 0.80 5.0 EEUFC1V122L 100 16 20 2205 0.029 5000 0.80 7.5 7.5 EEUFC1V122( ) 100 250 12.5 35 2510 0.022 5000 0.80 5.0 EEUFC1V152L 100 1500 16 25 2555 0.022 5000 0.80 7.5 7.5 EEUFC1V152( ) 100 250 18 20 2490 0.028 5000 0.80 7.5 7.5 EEUFC1V152S( ) 100 250 12.5 40 2655 0.018 5000 0.80 5.0 EEUFC1V182L 100 1800 16 25 2555 0.022 5000 0.80 7.5 7.5 EEUFC1V182( ) 100 250 18 20 2490 0.028 5000 0.80 7.5 7.5 EEUFC1V182S( ) 100 250 16 31.5 3010 0.018 5000 0.80 7.5 EEUFC1V222 100 18 25 2740 0.020 5000 0.80 7.5 7.5 EEUFC1V222S( ) 100 250 16 35.5 3150 0.016 5000 0.80 7.5 EEUFC1V272L 100 18 31.5 3635 0.016 5000 0.80 7.5 EEUFC1V272 50 3300 18 35.5 3680 0.015 5000 0.80 7.5 EEUFC1V332 50 3900 18 40 3735 0.014 5000 0.80 7.5 EEUFC1V392 50 – EE87 –, Cap. Ripple Imped- Endur- Lead Lead SpaceW.V. (±20 %) Dia. Length Current ance ance Dia. Straight(100 kHz) (100 kHz) Taping Taping Part No. Leads TapingStraight 1.0 5 11 20 2.400 1000 0.50 2.0 5.0 2.5 EEUFC1H1R0( ) 200 2000 2.2 5 11 45 1.800 1000 0.50 2.0 5.0 2.5 EEUFC1H2R2( ) 200 2000 3.3 5 11 65 1.300 1000 0.50 2.0 5.0 2.5 EEUFC1H3R3( ) 200 2000 4.7 5 11 95 1.300 1000 0.50 2.0 5.0 2.5 EEUFC1H4R7( ) 200 2000 4 11 90 2.500 1000 0.45 1.5 5.0 2.5 EEUFC1H100( ) 200 2000 5 11 125 1.300 1000 0.50 2.0 5.0 2.5 EEUFC1H100L( ) 200 2000 12 5 11 135 1.300 1000 0.50 2.0 5.0 2.5 EEUFC1H120( ) 200 2000 15 5 11 145 1.300 1000 0.50 2.0 5.0 2.5 EEUFC1H150( ) 200 2000 18 5 11 155 1.300 1000 0.50 2.0 5.0 2.5 EEUFC1H180( ) 200 2000 22 5 11 155 1.300 1000 0.50 2.0 5.0 2.5 EEUFC1H220( ) 200 2000 27 5 15 215 0.900 1000 0.50 2.0 5.0 2.5 EEUFC1H270( ) 200 2000 33 6.3 11.2 260 0.600 1000 0.50 2.5 5.0 2.5 EEUFC1H330( ) 200 2000 39 6.3 11.2 260 0.600 1000 0.50 2.5 5.0 2.5 EEUFC1H390( ) 200 2000 47 6.3 11.2 260 0.600 1000 0.50 2.5 5.0 2.5 EEUFC1H470( ) 200 2000 56 6.3 15 360 0.400 1000 0.50 2.5 5.0 2.5 EEUFC1H560( ) 200 2000 68 8 11.5 485 0.234 2000 0.60 3.5 5.0 EEUFC1H680( ) 200 1000 82 8 11.5 485 0.234 2000 0.60 3.5 5.0 EEUFC1H820( ) 200 1000 100 10 12.5 615 0.162 3000 0.60 5.0 5.0 EEUFC1H101( ) 200 500 8 15 635 0.155 2000 0.60 3.5 5.0 EEUFC1H121L( ) 200 1000 10 12.5 615 0.162 3000 0.60 5.0 5.0 EEUFC1H121( ) 200 500 150 10 16 850 0.119 3000 0.60 5.0 5.0 EEUFC1H151( ) 200 500 8 20 860 0.120 2000 0.60 3.5 5.0 EEUFC1H181L( ) 200 1000 10 16 850 0.119 3000 0.60 5.0 5.0 EEUFC1H181( ) 200 500 10 20 1030 0.090 3000 0.60 5.0 5.0 EEUFC1H221( ) 200 500 12.5 15 1150 0.110 5000 0.60 5.0 5.0 EEUFC1H221S( ) 200 500 270 10 25 1200 0.082 3000 0.60 5.0 5.0 EEUFC1H271( ) 200 500 10 30 1610 0.060 3000 0.60 5.0 EEUFC1H331L 100 12.5 20 1480 0.063 5000 0.60 5.0 5.0 EEUFC1H331( ) 200 500 12.5 20 1480 0.063 5000 0.60 5.0 5.0 EEUFC1H391( ) 200 500 16 15 1610 0.080 5000 0.80 7.5 7.5 EEUFC1H391S( ) 100 250 10 30 1610 0.060 3000 0.60 5.0 EEUFC1H471L 100 12.5 25 1832 0.050 5000 0.60 5.0 5.0 EEUFC1H471( ) 200 500 12.5 25 1832 0.050 5000 0.60 5.0 5.0 EEUFC1H561( ) 200 500 18 15 1900 0.068 5000 0.80 7.5 7.5 EEUFC1H561S( ) 100 250 12.5 30 2215 0.040 5000 0.80 5.0 EEUFC1H681L 100 16 20 1835 0.048 5000 0.80 7.5 7.5 EEUFC1H681( ) 100 250 12.5 35 2285 0.034 5000 0.80 5.0 EEUFC1H821L 100 18 20 2420 0.042 5000 0.80 7.5 7.5 EEUFC1H821( ) 100 250 12.5 40 2590 0.030 5000 0.80 5.0 EEUFC1H102L 100 16 25 2235 0.034 5000 0.80 7.5 7.5 EEUFC1H102( ) 100 250 16 31.5 2700 0.028 5000 0.80 7.5 EEUFC1H122 100 18 25 2610 0.029 5000 0.80 7.5 7.5 EEUFC1H122S( ) 100 250 1500 16 35.5 2790 0.025 5000 0.80 7.5 EEUFC1H152L 100 16 40 2845 0.023 5000 0.80 7.5 EEUFC1H182L 100 18 31.5 3000 0.025 5000 0.80 7.5 EEUFC1H182 50 2200 18 35.5 3100 0.023 5000 0.80 7.5 EEUFC1H222 50 – EE88 –, Cap. Ripple Imped- Endur- Lead Lead SpaceW.V. (±20 %) Dia. Length Current ance ance Dia. Straight(100 kHz) (100 kHz) Straight Taping Taping Part No. Leads Taping 6.8 4 11 80 3.500 1000 0.45 1.5 5.0 2.5 EEUFC1J6R8( ) 200 2000 12 5 11 145 2.000 1000 0.50 2.0 5.0 2.5 EEUFC1J120( ) 200 2000 18 5 15 200 1.300 1000 0.50 2.0 5.0 2.5 EEUFC1J180( ) 200 2000 22 6.3 11.2 240 1.000 1000 0.50 2.5 5.0 2.5 EEUFC1J220( ) 200 2000 33 6.3 11.2 240 1.000 1000 0.50 2.5 5.0 2.5 EEUFC1J330( ) 200 2000 39 6.3 15 330 0.700 1000 0.50 2.5 5.0 2.5 EEUFC1J390( ) 200 2000 47 8 11.5 405 0.342 2000 0.60 3.5 5.0 EEUFC1J470( ) 200 1000 56 8 11.5 405 0.342 2000 0.60 3.5 5.0 EEUFC1J560( ) 200 1000 68 8 11.5 405 0.342 2000 0.60 3.5 5.0 EEUFC1J680( ) 200 1000 82 10 12.5 535 0.256 3000 0.60 5.0 5.0 EEUFC1J820( ) 200 500 8 15 535 0.230 2000 0.60 3.5 5.0 EEUFC1J101L( ) 200 1000 10 12.5 535 0.256 3000 0.60 5.0 5.0 EEUFC1J101( ) 200 500 120 10 16 600 0.194 3000 0.60 5.0 5.0 EEUFC1J121( ) 200 500 150 8 20 690 0.178 2000 0.60 3.5 5.0 EEUFC1J151( ) 200 1000 10 20 885 0.147 3000 0.60 5.0 5.0 EEUFC1J181( ) 200 500 12.5 15 1020 0.150 5000 0.60 5.0 5.0 EEUFC1J181S( ) 200 500 10 20 885 0.147 3000 0.60 5.0 5.0 EEUFC1J221X( ) 200 500 220 10 25 1050 0.130 3000 0.60 5.0 5.0 EEUFC1J221( ) 200 500 12.5 20 1285 0.085 5000 0.60 5.0 5.0 EEUFC1J221S( ) 200 500 63 270 16 15 1410 0.090 5000 0.80 7.5 7.5 EEUFC1J271( ) 100 250 10 30 1300 0.090 3000 0.60 5.0 EEUFC1J331L 100 12.5 20 1285 0.085 5000 0.60 5.0 5.0 EEUFC1J331( ) 200 500 12.5 25 1720 0.070 5000 0.60 5.0 5.0 EEUFC1J391( ) 200 500 18 15 1690 0.086 5000 0.80 7.5 7.5 EEUFC1J391S( ) 100 250 12.5 30 2090 0.055 5000 0.80 5.0 EEUFC1J471L 100 16 20 1765 0.059 5000 0.80 7.5 7.5 EEUFC1J471( ) 100 250 560 16 25 2160 0.050 5000 0.80 7.5 7.5 EEUFC1J561( ) 100 250 12.5 35 2265 0.047 5000 0.80 5.0 EEUFC1J681L 100 680 16 25 2160 0.050 5000 0.80 7.5 7.5 EEUFC1J681( ) 100 250 18 20 2290 0.055 5000 0.80 7.5 7.5 EEUFC1J681S( ) 100 250 12.5 40 2560 0.042 5000 0.80 5.0 EEUFC1J821L 100 820 16 31.5 2670 0.043 5000 0.80 7.5 EEUFC1J821 100 18 25 2585 0.043 5000 0.80 7.5 7.5 EEUFC1J821S( ) 100 250 16 31.5 2670 0.043 5000 0.80 7.5 EEUFC1J102U 100 16 35.5 2770 0.036 5000 0.80 7.5 EEUFC1J102 100 16 40 2825 0.030 5000 0.80 7.5 EEUFC1J122L 100 18 31.5 2950 0.032 5000 0.80 7.5 EEUFC1J122 50 1500 18 35.5 3095 0.030 5000 0.80 7.5 EEUFC1J152 50 1800 18 40 3205 0.025 5000 0.80 7.5 EEUFC1J182 50 – EE89 –, Ripple Imped- Endur- Lead Lead Space W.V. Cap.(±20 %) Dia. Length Current ance ance Dia. Straight(100 kHz) (100 kHz) Part No. TapingStraight Taping Taping Leads 5.6 5 11 80 4.10 1000 0.5 2.0 5.0 2.5 EEUFC2A5R6( ) 200 2000 8.2 5 15 90 2.80 1000 0.5 2.0 5.0 2.5 EEUFC2A8R2( ) 200 2000 12 6.3 11.2 114 1.80 1000 0.5 2.5 5.0 2.5 EEUFC2A120( ) 200 2000 18 6.3 15 155 1.10 1000 0.5 2.5 5.0 2.5 EEUFC2A180( ) 200 2000 22 8 11.5 260 0.680 2000 0.6 3.5 5.0 EEUFC2A220( ) 200 1000 8 15 340 0.450 2000 0.6 3.5 5.0 EEUFC2A330L( ) 200 1000 10 12.5 306 0.530 3000 0.6 5.0 5.0 EEUFC2A330( ) 200 500 8 20 455 0.330 2000 0.6 5.0 5.0 EEUFC2A390L( ) 200 1000 10 16 400 0.360 3000 0.6 5.0 5.0 EEUFC2A390( ) 200 500 56 10 20 463 0.240 3000 0.6 5.0 5.0 EEUFC2A560( ) 200 500 10 25 599 0.210 3000 0.6 5.0 5.0 EEUFC2A680L( ) 200 500 12.5 15 511 0.230 5000 0.6 5.0 5.0 EEUFC2A680( ) 200 500 10 30 698 0.150 3000 0.6 5.0 EEUFC2A101L 100 12.5 20 671 0.180 5000 0.6 5.0 5.0 EEUFC2A101( ) 200 500 120 16 15 793 0.140 5000 0.8 7.5 7.5 EEUFC2A121S( ) 100 250 12.5 25 807 0.110 5000 0.6 5.0 5.0 EEUFC2A151( ) 200 500 18 15 917 0.120 5000 0.8 7.5 7.5 EEUFC2A151S( ) 100 250 12.5 30 937 0.098 5000 0.8 5.0 EEUFC2A181L 100 16 20 995 0.110 5000 0.8 7.5 7.5 EEUFC2A181( ) 100 250 12.5 35 1040 0.087 5000 0.8 5.0 EEUFC2A221L 100 16 25 1170 0.089 5000 0.8 7.5 7.5 EEUFC2A221( ) 100 250 12.5 40 1130 0.072 5000 0.8 5.0 EEUFC2A271L 100 18 20 1230 0.080 5000 0.8 7.5 7.5 EEUFC2A271S( ) 100 250 16 31.5 1520 0.062 5000 0.8 7.5 EEUFC2A331 100 18 25 1420 0.070 5000 0.8 7.5 7.5 EEUFC2A331S( ) 100 250 16 35.5 1730 0.053 5000 0.8 7.5 EEUFC2A391L 100 18 31.5 1600 0.062 5000 0.8 7.5 EEUFC2A391 50 470 16 40 1920 0.047 5000 0.8 7.5 EEUFC2A471 100 560 18 35.5 1770 0.041 5000 0.8 7.5 EEUFC2A561 50 680 18 40 2300 0.036 5000 0.8 7.5 EEUFC2A681 50 When requesting taped product, please put the letter "B" or "H" bet ween the "( )". Lead wire pitch B=5 mm, 7.5 mm, H=2.5 mm. The taping dimensions are explained on EE189 of our Catalog. Please use it as a reference guide. – EE90 –]
15

Similar documents

Radial Lead Type
Radial Lead Type Series: EE Type: A ■ Features ● High ripple current (at high frequency): 40 % higher than ED Series ● Endurance: 105 °C 8000 h to 10000 h ● RoHS directive compliant ■ Specific ations Category Temp. Range –25 °C to + 105 °C Rated W.V. Range 160 V .DC to 450 V .DC Nominal Cap. Range 1
Snap-in Type ■ Features ■ Specific ations
Snap-in Type Series: ED Type: TS ■ Features ● Endurance : 105 °C 3000 h ● High ripple current capability in high frequency range. ● RoHS directive compliant ■ Specific ations Category Temp. Range –40 °C to + 105 °C –25 °C to +105 °C Rated W.V. Range 200 V.DC to 250 V.DC 400 V.DC to 450 V.DC Nominal
Aluminum Electrolytic Capacitor/ AD (For Audio) Radial Lead Type
Aluminum Electrolytic Capacitor/ AD (For Audio) Radial Lead Type Series: AD Type : A(Radial Leads) ■ Recommended Applications Ammplifier. CD Player. Hi-Fi VTR. Car Audio. Electric piano Japan ■ Features Endurance: 85°C 1000 h, 5 mm height, Newly type electrolytic separator, Clear and speedy sound. ■
Snap-in Type ■ Features ■ Specific ations
Snap-in Type Series: XB Type: TS ■ Features ● Endurance : 105 °C 7000 h ● RoHS directive compliant ■ Specific ations Category Temp. Range –40 °C to +105 °C –25 °C to +105 °C Rated W.V. Range 160 V.DC to 250 V.DC 315 V.DC to 450 V.DC Nominal Cap. Range 180 µF to 2200 µF 39 µF to 680 µF Capacitance To
Snap-in Type ■ Features ■ Specific ations
Snap-in Type Series: UQ Type: TS ■ Features ● Endurance : 85 °C 2000 h ● 30 % Smaller than series TS-UP ● RoHS directive compliant ■ Specific ations Category Temp. Range –40 °C to +85 °C –25 °C to +85 °C Rated W.V. Range 16 V.DC to 100 V.DC 160 V.DC to 250 V.DC 315 V.DC to 450 V.DC Nominal Cap. Rang
Aluminum Electrolytic Capacitors/ TP Radial Lead Type
Aluminum Electrolytic Capacitors/ TP Radial Lead Type Series: TP Type: A ■ Features ● Endurance: 125 °C 2000 h to 5000 h or 135 °C 1000 h to 2000 h ● Smaller than series TA ● High ripple current (at high frequency) : 20 to 40% higher than TA series ● RoHS directive compliant ■ Specific ations Catego
MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS ZLK ZLK SERIES 105℃ Ultra High Ripple, Low Impedance. ◆FEATURES ◆SPECIFICATIONS ◆DIMENSIONS (mm)
MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS ZLK ZLK SERIES 105℃ Ultra High Ripple, Low Impedance. ◆FEATURES ・Load Life: 105℃ 4000~5000hours. ・RoHS compliance. ◆SPECIFICATIONS ◆DIMENSIONS (mm) Items Characteristics SLEEVE(PET) φd Category Temperature Range -40~+105℃ Rated Voltage Range 10~35V.DC L+αMA
MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS ZLG ZLG SERIES Load Life: 105℃ 1000~5000hours. Ultra Low impedance. ◆FEATURES ◆SPECIFICATIONS
MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS ZLG ZLG SERIES Load Life: 105℃ 1000~5000hours. Ultra Low impedance. ◆FEATURES ・Extremely reduced impedance at high frequency range than ZL series. ・Load Life : 105℃ 1000~5000hours. ・RoHS compliance. ◆SPECIFICATIONS Items Characteristics Category Temperature
MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS YXM YXM SERIES Load Life : 105℃ 10000 hours. Miniaturized. ◆FEATURES ・Miniaturized Long Life. ・RoHS compliance.
MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS YXM YXM SERIES Load Life : 105℃ 10000 hours. Miniaturized. ◆FEATURES ・Miniaturized Long Life. ・RoHS compliance. ◆SPECIFICATIONS Items Characteristics ◆DIMENSIONS (mm) SLEEVE Category Temperature Range -25~+105℃ φd Rated Voltage Range 10~100V.DC L+1.5MAX 15M
MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS YXJ YXJ SERIES NEW 105℃ Miniaturized.Long Life,Low impedance. ◆FEATURES ◆SPECIFICATIONS
MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS YXJ YXJ SERIES NEW 105℃ Miniaturized.Long Life,Low impedance. ◆FEATURES ・Load Life : 105℃ 4000~10000hours. ・RoHS compliance. ◆SPECIFICATIONS Items Characteristics Category Temperature Range -40~+105℃ Rated Voltage Range 6.3~100V.DC Capacitance Tolerance ±20
MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS YXF YXF SERIES 105℃ Long Life. Low impedance. ◆FEATURES ◆SPECIFICATIONS
MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS YXF YXF SERIES 105℃ Long Life. Low impedance. ◆FEATURES ・Load Life : 105℃ 4000~10000hours. ・Low impedance at 100kHz with selected materials. ・ RoHS compliance. ◆SPECIFICATIONS Items Characteristics Category Temperature Range -40~+105℃ Rated Voltage Range 6.
MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS WXA WXA SERIES 105℃ Miniaturized low profile. ◆FEATURES ◆SPECIFICATIONS
MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS WXA WXA SERIES 105℃ Miniaturized low profile. ◆FEATURES ・9~25mm height. ・ RoHS compliance. ◆SPECIFICATIONS Items Characteristics Category Temperature Range -55~+105℃ -40~+105℃ -25~+105℃ Rated Voltage Range 6.3~50V.DC 160~250V.DC 350~450V.DC Capacitance Tole
MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS WA WA SERIES 85℃ Miniaturized low profile. ◆FEATURES ◆SPECIFICATIONS
MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS WA WA SERIES 85℃ Miniaturized low profile. ◆FEATURES ・9~25mm height. ・RoHS compliance. ◆SPECIFICATIONS Items Characteristics Category Temperature Range -40~+85℃ -25~+85℃ Rated Voltage Range 6.3~250V.DC 350~450V.DC Capacitance Tolerance ±20%(20℃, 120Hz) 6.3~
LARGE CAN TYPE ALUMINUM ELECTROLYTIC CAPACITORS VXS VXS SERIES NEW ◆FEATURES ◆SPECIFICATIONS
LARGE CAN TYPE ALUMINUM ELECTROLYTIC CAPACITORS VXS VXS SERIES NEW 105℃ 5000hour, Charge-Discharge Facility, Snap-in Terminal Type ◆FEATURES ・Load Life : 105℃ 5000 hours. ・RoHS compliance. ・ΔV=Specified the endurance of 100milion times Charge-Discharge load. ◆SPECIFICATIONS Items Characteristics Cat
LARGE CAN TYPE ALUMINUM ELECTROLYTIC CAPACITORS VXR VXR SERIES 105℃ 7000 hours, Snap-in Terminal Type. ◆FEATURES ◆SPECIFICATIONS
LARGE CAN TYPE ALUMINUM ELECTROLYTIC CAPACITORS VXR VXR SERIES 105℃ 7000 hours, Snap-in Terminal Type. ◆FEATURES ・Load Life : 105℃ 7000hours. ・RoHS compliance. ◆SPECIFICATIONS Items Characteristics Category Temperature Range -25~+105℃ Rated Voltage Range 160~450V.DC Capacitance Tolerance ±20%(20℃,12
LARGE CAN TYPE ALUMINUM ELECTROLYTIC CAPACITORS VXH VXH SERIES UPGRADE 105℃ 5000hours Ultra Miniaturized, Snap-in Terminal Type ◆FEATURES ◆SPECIFICATIONS
LARGE CAN TYPE ALUMINUM ELECTROLYTIC CAPACITORS VXH VXH SERIES UPGRADE 105℃ 5000hours Ultra Miniaturized, Snap-in Terminal Type ◆FEATURES ・Load Life : 105℃ 5000 hours. ・Smaller size than VXG series. ・RoHS compliance. ◆SPECIFICATIONS Items Characteristics Category Temperature Range -25~+105℃ Rated Vo
LARGE CAN TYPE ALUMINUM ELECTROLYTIC CAPACITORS USH USH SERIES 85℃ Ultra Miniaturized, Snap-in Terminal Type ◆FEATURES ◆SPECIFICATIONS
LARGE CAN TYPE ALUMINUM ELECTROLYTIC CAPACITORS USH USH SERIES 85℃ Ultra Miniaturized, Snap-in Terminal Type ◆FEATURES ・Load Life : 85℃ 2000 hours. ・Smaller size than USG series. ・RoHS compliance. ◆SPECIFICATIONS Items Characteristics Category Temperature Range -25~+85℃ Rated Voltage Range 400~450V.
LARGE CAN TYPE ALUMINUM ELECTROLYTIC CAPACITORS USG USG SERIES 85℃ Miniaturized, Snap-in Terminal Type ◆FEATURES ◆SPECIFICATIONS
LARGE CAN TYPE ALUMINUM ELECTROLYTIC CAPACITORS USG USG SERIES 85℃ Miniaturized, Snap-in Terminal Type ◆FEATURES ・Load Life : 85℃ 2000 hours. ・Smaller size than USC series. ・RoHS compliance. ◆SPECIFICATIONS Items Characteristics Category Temperature Range -40~+85℃ -25~+85℃ Rated Voltage Range 160~25
USC SERIES 85℃ Standard, Snap-in Terminal Type ◆FEATURES ◆SPECIFICATIONS
USC SERIES 85℃ Standard, Snap-in Terminal Type ◆FEATURES ・Load Life : 85℃ 3000 hours. ・Smaller size with higher ripple current endurance than USR series. ・RoHS compliance. ◆SPECIFICATIONS Items Characteristics Category Temperature Range -40~+85℃ -25~+85℃ Rated Voltage Range 10~250V.DC 315~450V.DC Ca
MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS TXW TXW SERIES 105℃ Long Life (10000hours), Miniaturized ◆FEATURES ◆SPECIFICATIONS
MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS TXW TXW SERIES 105℃ Long Life (10000hours), Miniaturized ◆FEATURES ・Load Life : 105℃ 10000 hours. ・Body diameter of φ8mm to φ18mm with high ripple current capability. ・Smaller size than the current VXW series. ・RoHS compliance. ◆SPECIFICATIONS Items Charact
TWL SERIES
MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS TWL TWL SERIES Low Leakage Current ◆FEATURES ・RoHS compliance. ◆SPECIFICATIONS Items Characteristics Category Temperature Range -40~+85℃ Rated Voltage Range 6.3~50V.DC Capacitance Tolerance ±20%(20℃,120Hz) I=0.002CV or 0.4μA whichever is greater. (After 2 m
CHIP ALUMINUM ELECTROLYTIC CAPACITORS TKV TKV SERIES NEW 105℃ Low ESR , Lead Free Reflow Soldering. ◆FEATURES ◆SPECIFICATIONS
CHIP ALUMINUM ELECTROLYTIC CAPACITORS TKV TKV SERIES NEW 105℃ Low ESR , Lead Free Reflow Soldering. ◆FEATURES ・Load Life 105℃ 2000Hrs. ・Reflow soldering is available. ・Available for high density mounting ・Low ESR at 100kHz with selected material. ・RoHS compliance. ◆SPECIFICATIONS Items Characteristi
MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS SXW SXW SERIES 105℃ Overvoltage Vent Operation Facility, Lead Wire Type ◆FEATURES ◆SPECIFICATIONS
MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS SXW SXW SERIES 105℃ Overvoltage Vent Operation Facility, Lead Wire Type ◆FEATURES ・Load Life : 105℃ 1000~2000 hours. ・Body diameter of φ10mm to φ18mm with high ripple current capability. ・This series has specification of vent operation in overvoltage situat
LARGE CAN TYPE ALUMINUM ELECTROLYTIC CAPACITORS SXG SXG SERIES 105℃ Miniaturized,Overvoltage Vent Operation Facility, Snap-in Terminal Type ◆FEATURES ◆SPECIFICATIONS
LARGE CAN TYPE ALUMINUM ELECTROLYTIC CAPACITORS SXG SXG SERIES 105℃ Miniaturized,Overvoltage Vent Operation Facility, Snap-in Terminal Type ◆FEATURES ・Load Life : 105℃ 2000 hours. ・This series has specification of vent operation in overvoltage situation. Please consult us for any further details ・Sm
LARGE CAN TYPE ALUMINUM ELECTROLYTIC CAPACITORS SXC SXC SERIES 105℃, Overvoltage Vent Operation Facility, Snap-in Terminal Type ◆FEATURES ◆SPECIFICATIONS
LARGE CAN TYPE ALUMINUM ELECTROLYTIC CAPACITORS SXC SXC SERIES 105℃, Overvoltage Vent Operation Facility, Snap-in Terminal Type ◆FEATURES ・Load Life : 105℃ 2000 hours. ・This series has specification of vent operation in overvoltage situation. Please consult us for any further details. ・RoHS complian
MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS SAW SAW SERIES 105℃ Miniaturized, Overvoltage Vent Operation Facility, Lead Wire Type ◆FEATURES ・Load Life : 105℃ 2000 hours.
MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS SAW SAW SERIES 105℃ Miniaturized, Overvoltage Vent Operation Facility, Lead Wire Type ◆FEATURES ・Load Life : 105℃ 2000 hours. ・This series has specification of vent operation in overvoltage situation. Please consult us for any further details. ・Smaller size
MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS RX50 RX50 SERIES Load Life : 150℃ 1000 hours. ◆FEATURES ◆SPECIFICATIONS
MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS RX50 RX50 SERIES Load Life : 150℃ 1000 hours. ◆FEATURES ・Solution for high temperature application such as automobile electronics. ・RoHS compliance. ◆SPECIFICATIONS Items Characteristics Category Temperature Range -40~+150℃ Rated Voltage Range 10~63V.DC Cap
MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS RX30 RX30 SERIES Load Life : 130℃ 1000~4000hours. ◆FEATURES ◆SPECIFICATIONS
MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS RX30 RX30 SERIES Load Life : 130℃ 1000~4000hours. ◆FEATURES ・For Electronic Ballast of CFL, For Power Supply. ・RoHs compliance ◆SPECIFICATIONS Items Characteristics Category Temperature Range -40~+130℃ -25~+130℃ Rated Voltage Range 10~100V.DC 200,400V.DC Ca
MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS QXW QXW SERIES 105℃ Ultra Miniaturized ◆FEATURES ◆SPECIFICATIONS
MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS QXW QXW SERIES 105℃ Ultra Miniaturized ◆FEATURES ・Load Life : 105℃ 2000 hours. ・Body diameter of φ10mm to φ18mm with high ripple current capability. ・This series is one class smaller than the current KXW series. ・RoHS compliance. ◆SPECIFICATIONS Items Chara
MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS PX PX SERIES 105℃ Standard ◆FEATURES ◆SPECIFICATIONS
MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS PX PX SERIES 105℃ Standard ◆FEATURES ・RoHS compliance. ◆SPECIFICATIONS Items Characteristics Category Temperature Range -55~+105℃ -40~+105℃ -25~+105℃ Rated Voltage Range 6.3~100V.DC 160~400V.DC 450V.DC Capacitance Tolerance ±20%(20℃, 120Hz) 6.3~100V.DC 160~