Download: CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS Surface Mount ?SPECIFICATIONS
CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS Surface Mount @Super low ESR, impedance and high heat resistance have been obtained by using con- ductive polymer as electrolyte. PXH @Suitable for DC-DC converters, voltage regulators and decoupling applications. @Endurance : 125C 1,000 hours Higher temperature @Rated voltage range : 2.5 to 20Vdc, Capacitance range : 22 to 1,000MF @Case size range : F6.3B5.7L to F10B7.7L PXA @RoHS Compliant ?SPECIFICATIONS Items Characteristics Category Temperature Range -55 to +125C Rated Voltage Range 2.5 to 20Vdc Capacitance Tolerance P20% (M) (at 20C, 120Hz) Su...
Author:
Tasootoor Shared: 8/19/19
Downloads: 1499 Views: 3198
Content
CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS Surface Mount
@Super low ESR, impedance and high heat resistance have been obtained by using con- ductive polymer as electrolyte. PXH @Suitable for DC-DC converters, voltage regulators and decoupling applications. @Endurance : 125C 1,000 hours Higher temperature @Rated voltage range : 2.5 to 20Vdc, Capacitance range : 22 to 1,000MF @Case size range : F6.3B5.7L to F10B7.7L PXA @RoHS Compliant ?SPECIFICATIONS Items Characteristics Category Temperature Range -55 to +125C Rated Voltage Range 2.5 to 20Vdc Capacitance Tolerance P20% (M) (at 20C, 120Hz) Surge Voltage Rated voltageB1.15 (at 125C) Leakage Current Shall not exceed values shown in STANDARD RATINGS. (at 20C after 2 minutes) Dissipation Factor (tane) 0.12 max. (at 20C, 120Hz) Low Temperature Characteristics Z(-25C)/Z(+20C)[1.15 (Max. Impedance Ratio) Z(-55C)/Z(+20C)[1.25 (at 100kHz) Endurance The following specifications shall be satisfied when the capacitors are restored to 20C after the rated voltage is applied for 1,000 hours at 125C. Appearance No significant damage Capacitance change [P20% of the initial value DF (tanE) [200% of the initial specified value ESR [200% of the initial specified value Leakage current [The initial specified value Bias Humidity The following specifications shall be satisfied when the capacitors are restored to 20C after subjecting them to the DC rated voltage at 60C, 90 to 95% RH for 1,000 hours. Appearance No significant damage Capacitance change [P20% of the initial value DF (tanE) [150% of the initial specified value ESR [150% of the initial specified value Leakage current [The initial specified value Surge Voltage The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltage specified at 125C for 30 seconds through a protective resistor(R=1kO) and discharge for 5 minutes 30 seconds. Appearance No significant damage Capacitance change [P20% of the initial value DF (tanE) [150% of the initial specified value ESR [150% of the initial specified value Leakage current [The initial specified value Failure Rate 0.5% per 1,000 hours maximum (Confidence level 60% at 125C) *Note : If any doubt arises, measure the leakage current after the following voltage treatment. Voltage treatment : DC rated voltage is applied to the capacitors for 120 minutes at 125C. ?DIMENSIONS [mm] ?MARKING @Terminal Code : A EX) 20V22MFW H39F
Size code fDLABCWPV
F60 6.3 5.7 6.6 6.6 7.2 0.5 to 0.8 1.9 20 H70 8 6.7 8.3 8.3 9.0 0.7 to 1.1 3.1 J80 10 7.7 10.3 10.3 11.0 0.7 to 1.1 4.5 0.3max. AP0.2 LP0.3 ?PART NUMBERING SYSTEM12345678910 11 12 13 14 15 16 17 18APXHAAAARAAAAMAAAGSupplement code Size code Capacitance tolerance code Capacitance code (ex. 22MF:220,100MF:101) Taping code Terminal code Voltage code (ex. 6.3V:6R3,10V:100) Series code Category Please refer to "Product code guide (conductive polymer type)" (1/2) CAT. No. E1001K FDP0.5 BP0.2P
CP0.2,CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS Surface Mount
?STANDARD RATINGS Rated ripple current Leakage current ESR WV(Vdc) Cap(mF) Size code (mArms/100kHz) Part No. (mAmax/after 2min.) (momax/20c, 100k to 300kHz) -55c to +105c +105c to +125c 220 F60 110 35 2,500 770 APXH2R5ARA221MF60G 2.5 560 H70 280 30 3,100 960 APXH2R5ARA561MH70G 1,000 J80 500 25 3,700 1,100 APXH2R5ARA102MJ80G 150 F60 120 35 2,450 770 APXH4R0ARA151MF60G 4 220 H70 176 30 3,020 960 APXH4R0ARA221MH70G 680 J80 544 25 3,700 1,100 APXH4R0ARA681MJ80G 82 F60 103 40 2,400 720 APXH6R3ARA820MF60G 100 F60 126 40 2,400 720 APXH6R3ARA101MF60G 6.3 150 H70 189 30 3,020 960 APXH6R3ARA151MH70G 220 H70 277 30 3,020 960 APXH6R3ARA221MH70G 470 J80 592 25 3,700 1,100 APXH6R3ARA471MJ80G 56 F60 112 45 2,250 680 APXH100ARA560MF60G 120 H70 240 35 2,800 880 APXH100ARA121MH70G 150 H70 300 35 2,800 880 APXH100ARA151MH70G 330 J80 660 30 3,700 1,010 APXH100ARA331MJ80G 39 F60 125 50 2,050 650 APXH160ARA390MF60G 82 H70 262 40 2,700 830 APXH160ARA820MH70G 150 J80 480 35 3,020 930 APXH160ARA151MJ80G 180 J80 576 35 3,020 930 APXH160ARA181MJ80G 22 F60 88.0 60 1,650 590 APXH200ARA220MF60G 20 47 H70 188 45 2,000 780 APXH200ARA470MH70G 82 J80 328 45 2,400 820 APXH200ARA820MJ80G (2/2) CAT. No. E1001K]15
Similar documents
CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS Surface Mount Upg rade! @Super low ESR, impedance and high heat resistance have been obtained by using PXF conductive polymer as electrolyte. @Rated voltage range : 2.5 to 6.3Vdc, Capacitance range : 220 to 1,000MF Lower ESR @Case size range : F6.3B5.8L t
CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS Surface Mount @Super low ESR, impedance and high heat resistance have been obtained by using PXE conductive polymer as electrolyte @Rated voltage range : 2.5 to 25Vdc, case size range : F4B5.2L to F10B12.2L Lower ESR @Suitable for DC-DC converters, voltag
SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS Low impedance, 5000-hours-life, 105C New! @Endurance : 5,000 hours at 105C @Low impedance Longer life MVY MZK @Rated voltage range : 6.3 to 35V @Nominal capacitance range : 10 to 150MF @Suitable for high reliability products @Solvent resistant type @RoH
SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS Lower ESR, 105C New! @Lower ESR, 2,000 hours at 105C MZJ @Rated voltage range : 6.3 to 35V @Nominal capacitance range : 10 to 1,800 MF Lower ESR @Solvent resistant type (see PRECAUTIONS AND GUIDELINES) MZA @RoHS Compliant ?SPECIFICATIONS Items Character
SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS Low impedance, 10000-hours-life, 105C New! @Endurance : 10,000 hours at 105C @Low impedance @Rated voltage range : 6.3 to 50V Longer life Longer lifeMLA MZE MZF @Nominal capacitance range : 10 to 470MF @Suitable for high reliability products @Solvent re
SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS Low impedance, 7000 to 8000-hours-life, 105C @Endurance : 7,000 to 8,000 hours at 105C @Low impedance Longer life Longer life MVY MLA MZE @Rated voltage range : 6.3 to 50V @Nominal capacitance range : 10 to 470MF @Suitable for high reliability products
SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS Lower impedance, 105C @Lowest impedance, 2,000 hours at 105C MZA @Solvent resistant type (see PRECAUTIONS AND GUIDELINES) Lower Z @RoHS Compliant MVY ?SPECIFICATIONS Items Characteristics Category Temperature Range -55 to +105C Rated Voltage Range 6.3 t
SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS Bi-polar, 85C @Bi-polar chip type for the circuit, of which polarity is frequently reversed @Solvent resistant type (see PRECAUTIONS AND GUIDELINES) @RoHS Compliant ?SPECIFICATIONS Items Characteristics Category Temperature Range -40 to +85C Rated Volta
SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS Low impedance, 105C MZA @Endurance : 1,000 to 5,000 hours at 105C Lower Z @Low impedance @For digital equipment, especially DC-DC converters MVY MLALonger life @Solvent resistant type except 80 & 100Vdc (see PRECAUTIONS AND GUIDELINES) Lower Z @RoHS Com
SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS 4.5mm height, 85C MVS @4.5mm height @Endurance : 2,000 hours at 85C Low profile @Solvent resistant type (see PRECAUTIONS AND GUIDELINES) MVA @RoHS Compliant ?SPECIFICATIONS Items Characteristics Category Temperature Range -40 to +85C Rated Voltage Range
SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS 3000 to 5000-hours-life, 105C MVL @Endurance : 3,000 to 5,000 hours at 105C Longer life @Suitable for applications requiring long life such as continuously operating equipment, industrial applications, etc MVJ @Solvent resistant type (see PRECAUTIONS AN
SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS Bi-polar, 105C @Bi-polar chip type for the circuit, of which polarity is frequently reversed @Solvent resistant type (see PRECAUTIONS AND GUIDELINES) @RoHS Compliant ?SPECIFICATIONS Items Characteristics Category Temperature Range -40 to +105C Rated Vol
SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS Standard, 105C MVE @Endurance : 1,000 to 2,000 hours at 105C Downsized @Suitable to fit for downsized equipment @Solvent resistant type (see PRECAUTIONS AND GUIDELINES) MVK @RoHS Compliant @MVK series will be discontinued, strongly recommended MVE serie
SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS 2000-hours-life, 105C MVL longer life @Endurance : 2,000 hours at 105C MVJ @Solvent resistant type @RoHS Compliant longer life MVE ?SPECIFICATIONS Items Characteristics Category Temperature Range -40 to +105C Rated Voltage Range 6.3 to 50Vdc Capacitance
SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS High heat resistance, 125C @Lower ESR, Higher ripple current MVH @Endurance : 1,000 to 5,000 hours at 125C @Suitable to fit for automotive equipment 125C @Solvent resistant type (10 to 50V) MVE @RoHS Compliant ?SPECIFICATIONS Items Characteristics Categ
SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS Downsized, 105C @Rated voltage range : 6.3 to 450V, capacitance range : 1.0 to 6,800MF MVE MVL Longer life MVJ @Endurance : 1,000 to 2,000 hours at 105C @Case size range : F4B5.2L to F18B21.5L @Solvent resistant type except 100 to 450Vdc (see PRECAUTION
SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS Downsized, 85C @F4 through F18 case sizes are fully lined up MVA MVE @Endurance : 2,000 hours at 85C 105C @Suitable to fit for downsized equipment @Solvent resistant type except 100 to 450Vdc (see PRECAUTIONS AND GUIDELINES) @RoHS Compliant ?SPECIFICATI
SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS 5000-hours-life, 105C New! @6.1mm height Longer life @Endurance : 5,000 hours at 105C MVL MLK @Rated voltage range : 6.3 to 35V @Nominal capacitance range : 4.7 to 100MF @Suitable to fit for downsized equipment @Solvent resistant type (see PRECAUTIONS A
SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS 10000-hours-life, 105C New! @Endurance : 10,000 hours at 105C @Rated voltage range : 6.3 to 50V Longer life Longer lifeMVL MLE MLF @Nominal capacitance range : 1.0 to 1,000MF @Suitable for high reliability products @Solvent resistant type (see PRECAUTIO
SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS 7000 to 8000-hours-life, 105C @Endurance : 7,000 to 8,000 hours at 105C @Rated voltage range : 6.3 to 50V Longer life Longer lifeMVJ MVL MLE @Nominal capacitance range : 1.0 to 1,000MF @Suitable for high reliability products @Solvent resistant type (see
SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS Low impedance, 105C @Low impedance, long life Longer life @Rated voltage 6.3 to 50V, Capacitance 10 to 1,000MF MVY MLA @Case size F5B5.8L to F10B10L @Suitable for applications requiring long life and low impedance such as equipment in continuous operati
SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS Low ESR, 105C @Low ESR @Endurance : 3,000 hours at 105C @Rated voltage 400V, Capacitance 2.2 to 4.7MF @RoHS Compliant ?SPECIFICATIONS Items Characteristics Category Temperature Range -40 to +105C Rated Voltage Range 400Vdc Capacitance Tolerance P20%(M)
SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS High heat resistance, 125C Upg rade! @ESR : Less than MVH @Endurance : 2,000 hours at 125C MHB @Rated Voltage Range : 10 to 35V Lower ESR @Nominal capacitance range : 47 to 470MF MVH @Solvent resistant type @RoHS Compliant ?SPECIFICATIONS Items Characte
LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS 15mm height snap-ins, 85C SLM @15mm height snap-ins Low profile @Endurance with ripple current : 2,000 hours at 85C @Non solvent resistant type SMQ @RoHS Compliant ?SPECIFICATIONS Items Characteristics Category Temperature Range -25 to +85C Rated Vo
CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS Radial Lead Upg rade! @Super low ESR, high ripple current capability PSF @ESR 5mO max. (2 & 2.5Vdc) @Longer life (5,000 hours at 105C) @ESR after endurance is specifi ed within the initial spec (2 & 2.5Vdc) Lower ESR @Rated voltage range : 2 to 16Vdc PSE
CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS Radial Lead @Super low ESR, high ripple current capability PSC @Lower profil e than PSA (F8B8L to F10B12.5L) @Rated voltage range : 2.5 to 16Vdc Low profile @Nominal capacitance range : 270 to 2,700MF Lower ESR @Endurance : 2,000 hours at 105C PSA @Suitab
CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS Radial Lead PSC Low profile @Super low ESR, high temperature resistance and high ripple current capability Lower ESR @Rated voltage range : 2.5 to 16Vdc PSA @Endurance : 2,000 hours at 105C @Suitable for DC-DC converters, voltage regulators and decoupling
CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS Radial Lead PSA @Super low ESR, high temperature resistance @Large capacitance & Improved high ripple current capability Lower ESR @Rated voltage range : 2.5 to 35Vdc @Endurance : 2,000 hours at 105C PS @Suitable for DC-DC converters, voltage regulators a
MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Downsized, 5mm height, 85C SRM @Downsized from current standard SRE series Downsized @5mm height @Endurance : 1,000 hours at 85C SRE @Solvent resistant type (see PRECAUTIONS AND GUIDELINES) @RoHS Compliant ?SPECIFICATIONS Items Characteristics Category Temp
MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Low profil e, 85C SRG @Low profil e : F4B7mm to F18B25mm Downsized Downsized@Endurance : 1,000 to 2,000 hours at 85C Low profile @Solvent resistant type (see PRECAUTIONS AND GUIDELINES) @RoHS Compliant SRA SMG ?SPECIFICATIONS Items Characteristics Category