Download: CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS Surface Mount ?SPECIFICATIONS

CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS Surface Mount @Super low ESR, high ripple current capability PXS @Longer life (5,000 hours at 105C) @Rated voltage range : 4 to 16Vdc, Capacitance : 22 to 560MF Longer life @Case size : F5B5.8L to F8B6.7L @Suitable for DC-DC converters, voltage regulators and decoupling applications PXA/PXE for computer motherboards etc. @RoHS Compliant ?SPECIFICATIONS Items Characteristics Category Temperature Range -55 to +105C Rated Voltage Range 4 to 16Vdc Capacitance Tolerance P20% (M) (at 20C, 120Hz) Surge Voltage Rated voltageB1.15 (at 105C) Leakage Current I...
Author: Gamgee Shared: 8/19/19
Downloads: 131 Views: 289

Content

CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS Surface Mount

@Super low ESR, high ripple current capability PXS @Longer life (5,000 hours at 105C) @Rated voltage range : 4 to 16Vdc, Capacitance : 22 to 560MF Longer life @Case size : F5B5.8L to F8B6.7L @Suitable for DC-DC converters, voltage regulators and decoupling applications PXA/PXE for computer motherboards etc. @RoHS Compliant ?SPECIFICATIONS Items Characteristics Category Temperature Range -55 to +105C Rated Voltage Range 4 to 16Vdc Capacitance Tolerance P20% (M) (at 20C, 120Hz) Surge Voltage Rated voltageB1.15 (at 105C) Leakage Current I=0.2CV Where, I : Max. leakage current (MA), C : Nominal capacitance (MF), V : Rated voltage (Vdc) (at 20C after 2 minutes) Dissipation Factor (tane) 0.12 max. (at 20C, 120Hz) Low Temperature Characteristics Z(-25C)/Z(+20C)[1.15 (Max. Impedance Ratio) Z(-55C)/Z(+20C)[1.25 (at 100kHz) Endurance The following specifications shall be satisfied when the capacitors are restored to 20C after the rated voltage is applied for 5,000 hours at 105C. Appearance No significant damage Capacitance change [P20% of the initial value DF (tanE) [150% of the initial specified value ESR [150% of the initial specified value Leakage current [The initial specified value Bias Humidity The following specifications shall be satisfied when the capacitors are restored to 20C after subjecting them to the DC rated voltage at 60C, 90 to 95% RH for 1,000 hours. Appearance No significant damage Capacitance change [P20% of the initial value DF (tanE) [150% of the initial specified value ESR [150% of the initial specified value Leakage current [The initial specified value Surge Voltage The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltage specified at 105C for 30 seconds through a protective resistor(R=1kO) and discharge for 5 minutes 30 seconds. Appearance No significant damage Capacitance change [P20% of the initial value DF (tanE) [150% of the initial specified value ESR [150% of the initial specified value Leakage current [The initial specified value Failure Rate 0.5% per 1,000 hours maximum (Confidence level 60% at 105C) *Note : If any doubt arises, measure the leakage current after the following voltage treatment. Voltage treatment : DC rated voltage is applied to the capacitors for 120 minutes at 105C. ?DIMENSIONS [mm] ?MARKING @Terminal Code : A EX) 6.3V390MF

W S69A

Size Code fDLABCWP390 E61 5.0 5.8 5.3 5.3 5.9 0.5 to 0.8 1.4 6.3V F61 6.3 5.8 6.6 6.6 7.2 0.5 to 0.8 1.9 H70 8.0 6.7 8.3 8.3 9.0 0.7 to 1.1 3.1 0.3max. AP0.2 LP0.3 ?PART NUMBERING SYSTEM12345678910 11 12 13 14 15 16 17 18APXSAAAARAAAAMAAAGSupplement code Size code Capacitance tolerance code Capacitance code (ex. 47MF:470, 150MF:151) Taping code Terminal code Voltage code (ex. 6.3V:6R3, 10V:100) Series code Category Please refer to "Product code guide (conductive polymer type)" (1/2) CAT. No. E1001K FDP0.5 BP0.2

P

CP0.2,

CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS Surface Mount

?STANDARD RATINGS WV Cap Size ESR Rated ripple current (Vdc) (mF) code (momax/20c, 100k to 300kHz) (mArms/105c, 100kHz) Part No. 150 E61 25 2,150 APXS4R0ARA151ME61G 560 H70 22 3,220 APXS4R0ARA561MH70G 47 E61 30 1,970 APXS6R3ARA470ME61G 100 E61 25 2,150 APXS6R3ARA101ME61G 6.3 120 F61 22 2,570 APXS6R3ARA121MF61G 220 F61 22 2,570 APXS6R3ARA221MF61G 390 H70 22 3,220 APXS6R3ARA391MH70G 33 E61 70 1,100 APXS100ARA330ME61G 68 E61 30 1,970 APXS100ARA680ME61G 120 F61 27 2,320 APXS100ARA121MF61G 150 H70 30 2,760 APXS100ARA151MH70G 22 E61 90 1,060 APXS160ARA220ME61G 39 E61 35 1,820 APXS160ARA390ME61G 39 F61 37 2,050 APXS160ARA390MF61G 68 F61 30 2,200 APXS160ARA680MF61G 82 H70 30 2,760 APXS160ARA820MH70G 120 H70 27 2,900 APXS160ARA121MH70G (2/2) CAT. No. E1001K]
15

Similar documents

SPECIFICATION CNP SERIES Substrate Self Non-Polarized of 2000hours at +85℃
SPECIFICATION CNP SERIES Substrate Self Non-Polarized of 2000hours at +85℃ Main Technology Performance Item Characteristice Operating temperature -40~+85℃(16V~100V) -40~+85℃(160V~500V) range(℃) Rated voltage range(V) 16~500V.DC Capacitance ±20%(20℃,120Hz) tolerance(%) I≤3 CV 5mA (Five Minutes) Leakg
ALUMINUM ELECTROLYTIC CAPACITOR
ALUMINUM ELECTROLYTIC CAPACITOR TYPE VH SURFACE MOUNT TYPE, 105℃ 2000 HOURS LOW IMPEDANCE SPECIFICATIONS: Item Characteristic Operating Temperature Range -55℃ to +105℃ Capacitance tolerance ±20% at 120 Hz, 20℃ Leakage Current I≦0.01CV or 3μA , whichever is greater, measured after 2 minutes applicati
ALUMINUM ELECTROLYTIC CAPACITOR
ALUMINUM ELECTROLYTIC CAPACITOR SURFACE MOUNT TYPE Recommended pad pattern and size Recommended soldering methods E Unit: mmDLCase Land Size φx CodeXYW4x5.3 D55 1.6 2.6 1.0 4x5.7 D60 1.6 2.6 1.0 5x5.3 E55 1.6 3.0 1.4 5x5.7 E60 1.6 3.0 1.4 6.3x5.3 F55 1.6 3.5 1.9 6.3x5.7 F60 1.6 3.5 1.9 6.3x7.7 F80 1
ALUMINUM ELECTROLYTIC CAPACITOR
ALUMINUM ELECTROLYTIC CAPACITOR TYPE VZ SURFACE MOUNT TYPE, 105℃ 1000 HOURS LOW IMPEDANCE SPECIFICATIONS: Item Characteristic Operating Temperature Range -55℃ to +105℃ Capacitance tolerance ±20% at 120 Hz, 20℃ Leakage Current I≦0.01CV or 3μA , whichever is greater, measured after 2 minutes applicati
ALUMINUM ELECTROLYTIC CAPACITOR
ALUMINUM ELECTROLYTIC CAPACITOR TYPE VJ SURFACE MOUNT TYPE, 105℃ 2000 HOURS SPECIFICATIONS: Item Characteristic Operating Temperature -55℃ to +105℃ Range Capacitance tolerance ±20% at 120 Hz, 20℃ Leakage Current I≦0.01CV or 3μA , whichever is greater, measured after 2 minutes application of (I=DC Cu
BP Series
BP Series Bi-Polarized For Horizontal Deflection SPECIFICATION Item Characteristic Operation Temperature Range -40 ~ +85°C Rated Working Voltage 25 ~ 50 VDC Capacitance Tolerance (120Hz 25°C) ±20% (M) ±10% (K) Leakage Current(25°C) 100 (mA) After 5 minutes in both directions. WV 25 35 50 Surge Volta
CP-CON Conductive Polymer Aluminum Electrolytic Capacitors
CP-CON Conductive Polymer Aluminum Electrolytic Capacitors Gen Sales Electronics Co., Ltd. http://www.gensales.com.tw E-mail: email is hidden Taiwan Office : China : 13F-1, No. 186, Jian Yi RD. Jung-He City, First Floor, Plant 3, Dragontown Industrial Park, Taipei Hsien 235, Taiwan, R.O.C. Qinglinxi
ALUMINUM ELECTROLYTIC CAPACITOR
ALUMINUM ELECTROLYTIC CAPACITOR TYPE LP LARGE CAPACITANCE, RADIAL AUXILIARY LEAD FEATURES: 。with an auxiliary terminal which can withstand vibration excellently when affixing to PCB. SPECIFICATIONS: Item Type LP Operating Temperature Range 10~100V: -40℃ to +85℃ 160~250V: -25℃ to +85℃ Capacitance tol
INDEX Temperature Load Capacitance Rated Series Features Application Range Life Range Voltage (ºC) (Hour) (µF) Range Page (V.DC)
ALUMINUM ELECTROLYTIC CAPACITORS 1 INDEX Temperature Load Capacitance Rated Series Features Application Range Life Range Voltage (ºC) (Hour) (µF) Range Page (V.DC) Miniature Size SG Super Miniature (5mm) 85ºC 1000 0.1~330 4~50V 14 SS Super Miniature (5mm) 105ºC 1000 0.1~330 4~50V 16 SN Non Polarized
ALUMINUM ELECTROLYTIC CAPACITORS CAPACITOR SERIES TABLE
ALUMINUM ELECTROLYTIC CAPACITORS CAPACITOR SERIES TABLE Series Features Endurance Voltage Capacitance(+R=With ripple) Range(VDC) Range(μF) TEAPO LUXON CP CP 8mm height & Ultra Low 105℃,2000hours 2.5~6.3V 470-820 CG CG Ultra Low ESR 105℃,2000hours 2.5~25V 33~2700 CR CR Ultra Low ESR & Higher Ripple C
CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS
CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS
G-LUXON – Aluminium Electrolytic Capacitors
G-LUXON – Aluminium Electrolytic Capacitors Surrfface Mountt Allumiinum Ellecttrrollyttiic Capaciittorrs Aluminum Electrolytic Miiniiatturre Capacitors Allumiinum Ellecttrrollyttiic Capaciittorrs Larrge Allumiinum Ellecttrrollyttiic Capaciittorrs Solid Electrolytic Chiip Type,, wiitth conducttiing C
CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS
CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS
CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS
CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS
ALUMINUM ELECTROLYTIC CAPACITOR ALUMINUM ELECTROLYTIC CAPACITOR GAS Bi-polar Axial Leads, For Speaker use
ALUMINUM ELECTROLYTIC CAPACITOR ALUMINUM ELECTROLYTIC CAPACITOR GAS Bi-polar Axial Leads, For Speaker use • Single ended construction. • Designed specifically for speaker crossover networks application. • Test frequency at 1 KHz for D.F. & Capacitance. • Life guaranteed 1,000 hours/85°C. Acoustic pa
ALUMINUM ELECTROLYTIC CAPACITOR ALUMINUM ELECTROLYTIC CAPACITOR GBS Bi-polar Axial Leads, For Speaker use
ALUMINUM ELECTROLYTIC CAPACITOR ALUMINUM ELECTROLYTIC CAPACITOR GBS Bi-polar Axial Leads, For Speaker use • Single ended construction. • Designed specifically for speaker crossover networks application. • Test frequency at 1 KHz for D.F. & Capacitance. • Dissipation factor lower than GAS series. • L
ALUMINUM ELECTROLYTIC CAPACITOR ALUMINUM ELECTROLYTIC CAPACITOR GLA Axial Leads, Low leakage current 85°C Series
ALUMINUM ELECTROLYTIC CAPACITOR ALUMINUM ELECTROLYTIC CAPACITOR GLA Axial Leads, Low leakage current 85°C Series • Featured with low leakage current. • Suitable for timing & trigger circuits or other high reliability application. • Life guaranteed 2,000 hours/85°C. ● Specifications Item Performance
ALUMINUM ELECTROLYTIC CAPACITOR ALUMINUM ELECTROLYTIC CAPACITOR GHA Axial Leads, 105°C Standard Series
ALUMINUM ELECTROLYTIC CAPACITOR ALUMINUM ELECTROLYTIC CAPACITOR GHA Axial Leads, 105°C Standard Series • Standardized case sizes and temperature range up to 105°C. • Suitable for industrial equipments application. • Life guaranteed 2,000 hours/105°C. ● Specifications Item Performance Characteristics
GFS/GTS Bi-polar Axial Leads, For Speaker use
ALUMINUM ELECTROLYTIC CAPACITOR ALUMINUM ELECTROLYTIC CAPACITOR GFS/GTS Bi-polar Axial Leads, For Speaker use • Single ended (GFS)/Double ended sealed with rubber (GTS) for option. • Designed specifically for speaker crossover networks application. • Test frequency at 120 Hz for D.F & Capacitance. •
ALUMINUM ELECTROLYTIC CAPACITOR ALUMINUM ELECTROLYTIC CAPACITOR GWH Screw terminal, 105°C Standard series
ALUMINUM ELECTROLYTIC CAPACITOR ALUMINUM ELECTROLYTIC CAPACITOR GWH Screw terminal, 105°C Standard series • Screw terminal, working temperature range up to 105°C. • High ripple current & reliability for industrial equipments use. • Life guaranteed 2,000 hours/105°C. ● Specifications Item Performance
ALUMINUM ELECTROLYTIC CAPACITOR ALUMINUM ELECTROLYTIC CAPACITOR GVS Snap-In Type, 105°C Long Life
ALUMINUM ELECTROLYTIC CAPACITOR ALUMINUM ELECTROLYTIC CAPACITOR GVS Snap-In Type, 105°C Long Life • Snap-In terminal & extended life • High ripple current & reliability for power supply application. • Life guaranteed 5,000 hours/105°C. ● Specifications Item Performance Characteristics Operating Temp
ALUMINUM ELECTROLYTIC CAPACITOR ALUMINUM ELECTROLYTIC CAPACITOR GTA Axial Leads, 125°C Standard Series
ALUMINUM ELECTROLYTIC CAPACITOR ALUMINUM ELECTROLYTIC CAPACITOR GTA Axial Leads, 125°C Standard Series • Working temperature range up to 125°C. • Most suitable for industrial equipments where heat resistance application. • Life guaranteed : 2,000 hours 125°C. ● Specifications Item Performance Charac
ALUMINUM ELECTROLYTIC CAPACITOR ALUMINUM ELECTROLYTIC CAPACITOR GSS Bi-polar Axial Leads, For Speaker use
ALUMINUM ELECTROLYTIC CAPACITOR ALUMINUM ELECTROLYTIC CAPACITOR GSS Bi-polar Axial Leads, For Speaker use • Double ended sealed with rubber construction. • Designed specifically for speaker crossover networks application. • Test frequency at 1KHz for D.F. & Capacitance. • Dissipation factor lower th
ALUMINUM ELECTROLYTIC CAPACITOR ALUMINUM ELECTROLYTIC CAPACITOR GSA Axial Leads, 85°C Standard Series
ALUMINUM ELECTROLYTIC CAPACITOR ALUMINUM ELECTROLYTIC CAPACITOR GSA Axial Leads, 85°C Standard Series • Standardized case sizes for general purpose application. • Life guaranteed 2,000 hours/85°C. ● Specifications Item Performance Characteristics Operating Temperature range -40 + 85°C -25 + 85°C Rat
ALUMINUM ELECTROLYTIC CAPACITOR ALUMINUM ELECTROLYTIC CAPACITOR GNS Bi-polar Axial Leads, For Speaker use
ALUMINUM ELECTROLYTIC CAPACITOR ALUMINUM ELECTROLYTIC CAPACITOR GNS Bi-polar Axial Leads, For Speaker use • Double ended sealed with rubber construction. • Designed specifically for speaker crossover networks application • Test frequency at 1KHz for D.F. & Capacitance. Acoustic parts • Life guarante
ALUMINUM ELECTROLYTIC CAPACITOR ALUMINUM ELECTROLYTIC CAPACITOR GNA Non-polar standard, 85°C Axial Type
ALUMINUM ELECTROLYTIC CAPACITOR ALUMINUM ELECTROLYTIC CAPACITOR GNA Non-polar standard, 85°C Axial Type • Exhibits reliable performance in circuit where polarity reversible. • Life guaranteed 2,000 hours/85°C. ● Specifications Item Performance Characteristics Operating Temperature range -40 + 85°C R
ALUMINUM ELECTROLYTIC CAPACITOR ALUMINUM ELECTROLYTIC CAPACITOR GFZ Ultra Low Impedance series
ALUMINUM ELECTROLYTIC CAPACITOR ALUMINUM ELECTROLYTIC CAPACITOR GFZ Ultra Low Impedance series • Extremely low impedance and high ripple current, • Suitable for used in M/B and other high frequency application. • Life guaranteed 2,000 hours at 105°C ● Specifications Item Performance Characteristics
GBR Non-Polarized Radial Leads 85°C, For Horizontal Deflection Current Correction
ALUMINUM ELECTROLYTIC CAPACITOR ALUMINUM ELECTROLYTIC CAPACITOR GBR Non-Polarized Radial Leads 85°C, For Horizontal Deflection Current Correction • Designed specifically for TV’s horizontal deflection current correction use • Life guaranteed 2,000 hours/85°C. ● Specifications Item Performance Charac
ALUMINUM ELECTROLYTIC CAPACITOR ALUMINUM ELECTROLYTIC CAPACITOR PPT Axial Leads
ALUMINUM ELECTROLYTIC CAPACITOR ALUMINUM ELECTROLYTIC CAPACITOR PPT Axial Leads • Non-Inductive construction, polypropylene film/foil, axial leaded. • Continuous-duty operating temperature up to 105°C without voltage derating. • Tape-wrapped and epoxy end sealed which offers excellent humidity resis
MXP Axial Leads
ALUMINUM ELECTROLYTIC CAPACITOR ALUMINUM ELECTROLYTIC CAPACITOR MXP Axial Leads • Non-Inductive construction, metallized polypropylene fillm, axial leaded. • Operating temperature up to 105°C without derating and low ESR. • High reliable with self-healing property. • Flame-retardant tape wrapped and