Download: INDEX Temperature Load Capacitance Rated Series Features Application Range Life Range Voltage (ºC) (Hour) (µF) Range Page (V.DC)

ALUMINUM ELECTROLYTIC CAPACITORS 1 INDEX Temperature Load Capacitance Rated Series Features Application Range Life Range Voltage (ºC) (Hour) (µF) Range Page (V.DC) Miniature Size SG Super Miniature (5mm) 85ºC 1000 0.1~330 4~50V 14 SS Super Miniature (5mm) 105ºC 1000 0.1~330 4~50V 16 SN Non Polarized (5mm) 85ºC 1000 0.1~47 6.3~50V 18 MG Smaller Size (7mm) 85ºC 1000 0.1~470 4~63V 19 MI Smaller Size (7mm) 105ºC 1000 0.1~470 6.3~50V 21 MN Non Polarized (7mm) 85ºC 1000 0.1~100 6.3~50V 23 ML Low Leakage for Smaller Size 85ºC 1000 0.1~220 6.3~50V 24 Standard RG General Used Standard Size 85ºC 1000 0....
Author: Gamgee Shared: 8/19/19
Downloads: 708 Views: 1446

Content

ALUMINUM ELECTROLYTIC CAPACITORS 1

INDEX

Temperature Load Capacitance Rated Series Features Application Range Life Range Voltage (ºC) (Hour) (µF) Range Page (V.DC) Miniature Size SG Super Miniature (5mm) 85ºC 1000 0.1~330 4~50V 14 SS Super Miniature (5mm) 105ºC 1000 0.1~330 4~50V 16 SN Non Polarized (5mm) 85ºC 1000 0.1~47 6.3~50V 18 MG Smaller Size (7mm) 85ºC 1000 0.1~470 4~63V 19 MI Smaller Size (7mm) 105ºC 1000 0.1~470 6.3~50V 21 MN Non Polarized (7mm) 85ºC 1000 0.1~100 6.3~50V 23 ML Low Leakage for Smaller Size 85ºC 1000 0.1~220 6.3~50V 24 Standard RG General Used Standard Size 85ºC 1000 0.1~22000 6.3~450V 26 RB General Used Standard Size 105ºC 2000 0.47~15000 6.3~450V 29 LL Low Leakage Current 105ºC 1000 0.1~1000 6.3~50V 32 LG Low Leakage Current 85ºC 1000 0.1~1000 6.3~100V 34 NP Non Polarized 105ºC 1000 0.1~6800 6.3~100V 36 NG Non Polarized 85ºC 1000 0.47~1000 10~250V 38 BP Bi-Polar for Horizontal Deflection 85ºC 2000 2.2~22 25~50V 40 RT Tubular (Axial) 85ºC 1000 0.47~4700 6.3~450V 41 TH High temperature 125ºC 1000 33~1000 10~63V 43 Low Impedance RE Low ESR 105ºC 2000~3000 4.7~10000 6.3~50V 45 LZ High Ripple Current 105ºC 1000~5000 6.8~10000 6.3~100V 47 LE Low Impedance 105ºC 1000~3000 5.6~6800 6.3~100V 51 ME High Temperature, Low ESR 125ºC 2000~4000 470~3300 6.3~25V 55 MZ ULTRA Low ESR 105ºC 2000 330~3300 6.3~16V 57 ZH Long Life & Low Impedance 105ºC 1000~4000 47~8200 6.3~35V 59 LA Low Impedance for Smaller Size 105ºC 1000 4.7~1000 6.3~35V 62

SMD

VE Miniaturized, Big Capacitance 85ºC 2000 0.1~1500 6.3~100 66 EA High Capacitance Range 85ºC 2000 0.1~6800 6.3~450 68 ES Miniaturized 105ºC 105ºC 1000 0.1~100 6.3~50 70 EU Long Life, 105ºC, 5.7mmL 105ºC 3000 0.1~1000 6.3~50 71 GA Higher Capacitance Range, 105ºC 105ºC 2000 0.1~6800 6.3~450 72 EJ 105ºC 105ºC 2000 0.1~470 6.3~100 74 EH Low Impedance & ESR 105ºC 2000 4.7~1000 6.3~35 75 EZ Low Impedance & ESR, Downsize 105ºC 1000 4.7~220 6.3~50 76 ZH Low Impedance & ESR, Long Life 105ºC 2000~5000 4.7~680 6.3~100 77 UA Hgih Temperature Usage, 125ºC 125ºC 1000 33~1000 10~50 79 EB Non-polarized 85ºC 2000 0.1~47 6.3~50 80 EK Long Life, 105ºC 105ºC 2000~5000 0.1~470 6.3~50 81 EC Low Leakage Current 85ºC 2000 0.1~100 6.3~50 82, 2 ALUMINUM ELECTROLYTIC CAPACITORS

CAUTION FOR PROPER USE OF ALUMINUM ELECTROLYTIC CAPACITORS I

Upon using Aluminum Electrolytic Capacitors, please pay attention to the points listed below. When the following types of electrical loads indicated below are applied to Aluminum Electrolytic Capacitors, rapid deterioration of electrical property occurs: • Reverse voltage • Voltage exceeds rated working voltage • Rated ripple current is exceeded • Severe charging / discharging At such times, severe heat is generated, gas is emitted, then electrolyte leaks from the sealing area, and pressure relief vent operates due to inter- nal pressure. In the worst case, explosion or ignition may occur, and along with destruction of the capacitor combustibles may burst out. 1. CAUTION DURING CIRCUIT DESIGN 1-1 OPERATIONAL ENVIRONMENT, MOUNTING ENVIRONMENT AND CONDITIONS. ►Ensure that operational and mounting conditions follow the specified conditions detailed in the catalog and specification sheets. 1-2 OPERATING TEMPERATURE, RIPPLE CURRENT AND LOAD LIFE ►Operating temperature and applied ripple current should be within the specified value in the catalog or specification sheets 1-2-1 Do not use Aluminum Electrolytic Capacitors at temperature which exceeds the specified category temperature range. 1-2-2 Do not apply excessive current to the capacitors, which exceeds the specified rated ripple current. During circuit design, please ensure that capacitors are selected to match with the lifetime requirements of the application. 1-3 APPLICATION ►Aluminum Electrolytic Capacitors are normally polarized. Reverse voltage or AC voltage should not be applied. When polarity of applied voltage is uncertain or when the polarity may flip over, non - polar type capacitors should be used, but the non - polar type cannot be used for AC circuit. ►Standard Aluminum Electrolytic Capacitors are not suitable for rapid charge and discharge applications. 1-4 APPLIED VOLTAGE ►Do not exceed the rated voltage of capacitors. 1-5 INSULATION ►Aluminum Electrolytic Capacitors should be electrically isolated from the aluminum case, cathode lead wire, anode lead wire and circuit pattern. ►The PVC sleeve of Aluminum Electrolytic Capacitors is not recognized as an insulator, and therefore, the standard capacitor should not be used in a place where insulation function is needed. Please consult with Gen Sales should you require a higher grade of insulating sleeve. 1-6 CONDITIONS OF USE ►The following environment should be avoided when using Aluminum Electrolytic Capacitors. 1-6-1 Damp conditions such as water, salt water spray, or oil spray or fumes. High humidity or humidity condensation situations. 1-6-2 Hazardous gas / fumes such as hydrogen sulfide, sulfurous acid gas, nitrous acid, chlorine gas, ammonia or bromine gas. 1-6-3 Exposure to ozone, ultraviolet rays or radiation. 1-6-4 Severe vibration or shock which exceeds the condition specified in the catalog or specification sheets. 1-7 CONSIDERATION TO ASSEMBLY CONDITION. ►In designing a circuit, the following matters should be ensured in advance to the capacitors assembly on the printed Wiring board (PW board). 1-7-1 Design the appropriate hole spacing to match the lead pitch of capacitors. 1-7-2 Do not locate any wiring and circuit patterns directly above the capacitor’s vent. 1-7-3 Ensure enough free space above the capacitor’s vent. The recommended space is specified in the catalog or specification sheets. 1-7-4 In case the capacitor’s vent is facing the PW board, make a gas release hole on PW board. 1-8 CONSIDERATION TO CIRCUIT DESIGN ►Any copper lines or circuit patterns should not be laid under the capacitor. ►Parts which radiate heat should not be placed close to or reverse side of the Aluminum Electrolytic Capacitors on the PW board. 1-9 OTHERS ►Performance of electrical characteristics Of Aluminum Electrolytic Capacitors are affected by variation of operating temperature and frequency. Consider this variation when designing the circuit. ►Excessive holes and connection hole between both sides on the PW board should be avoided around or under the mounting area of the Aluminum Electrolytic Capacitors on double sided or multilayer PW board. ►Consider current balance when 2 or more Aluminum Electrolytic Capacitors are connected in parallel. ►Use bleeder resistors when 2 or more Aluminum Electrolytic Capacitors are connected in series. In this case, the resistors should be connected parallel to the capacitors. 2. CAUTION FOR ASSEMBLING CAPACITORS 2-1 CAUTION BEFORE ASSEMBLY ►Aluminum Electrolytic Capacitors can not be recycled after mounting and applying electricity in unit. The capacitors which are removed from PW board for the purpose of measuring electrical characteristics at the periodical inspection should only be recycled for the same position. ►Aluminum Electrolytic Capacitors may accumulate charge naturally during storage. In this case, discharge through a 1kΩ resistor before use. ►Leakage current of Aluminum Electrolytic Capacitors may be increased during long storage time. In this case, the capacitors should be subject to voltage treatment through a 1kΩ resistor before use. 2-2 IN THE ASSEMBLY PROCESS - 1 ►Ensure rated voltage and capacitance of the capacitors before mounting. ►Ensure the capacitor’s polarity before mounting. ►Do not use a capacitor which has been dropped onto a hard Surface. ►Do not use capacitors with damaged or dented cases or seals. 2-3 IN THE ASSEMBLY PROCESS - 2, ALUMINUM ELECTROLYTIC CAPACITORS 3 ►Capacitors should be mounted after confirmation that hole spacing on PW board matches the lead pitch of the capacitors. ►Avoid excessive force when clinching lead wire during auto-insertion process. ►Avoid excessive shock to capacitors by automatic insertion machine, during mounting, parts inspection or centering operations. ►Please utilize supporting material such as strap or adhesive to mount capacitors to PC board when it is anticipated that vibration or shock is applied. 2-4 SOLDERING ►Soldering conditions (temperatures, times) should be within the specified conditions which are described in the catalog or specification sheets. ►In case lead wire reforming is needed due to inappropriate pitch between capacitor and holes on PW board, stress to the capacitor should be avoided. ►In case soldered capacitor has to be withdrawn from the PW board by soldering irons, the capacitor should be removed after solder has melted sufficiently in order to avoid stress to the capacitor or lead wires. ►Soldering iron should never touch the capacitor’s body. 2-5 FLOW SOLDERING ►Do not dip capacitor’s body into melted solder Soldering condition (preheat, soldering temperature, dipping time) should be within the specified standard which is described in the catalog or specification sheets. ►Flux should not be adhered to capacitor’s body but only to its terminals. ►Other devices which are mounted near capacitors should not touch the capacitors. 2-6 REFLOW SOLDERING ►Reflow soldering conditions (preheat, soldering temperature, reflow time) should follow the specified standard which are described in the catalog or specification sheets. ►Heating standard should depend on surface of the capacitor color or materials when infrared rays are used because the capacitor’s heat ab- sorption depends on the surface color or materials. Check heat condition. ►Standard Aluminum Electrolytic Capacitors can not withstand two or more reflow processes. Consult with Gen Sales when two or more reflow processes are needed. 2-7 HANDLING AFTER SOLDERING ►Do not bend or twist the capacitor’s body after soldering on PW board. ►Do not pick-up or move PW board by holding the soldered capacitors. ►Do not hit the capacitors and isolate capacitors from the PW board or other device when stacking PW boards in store. 2-8 PW BOARD CLEANING ►Standard Aluminum Electrolytic Capacitors should be free from halogenated solvents during PW board cleaning after soldering. Use solvent proof capacitors and follow the specified cleaning condition when halogenated solvents are used. ►Solvents should have well controlled conductivity, pH, specific gravity and Water contents during the cleaning of solvent proof capacitors. ►Cleaned PW board with capacitors should not be kept in solvent environment or nonventilated places. Let PW board containing capacitors after cleaning dry with hot blast fully. The temperature of such breeze should be under the Upper category temperature of capacitors. 2-9 ADHESIVES AND COATING MATERIALS. ►Do not use halogenated adhesives and coating materials to fix Aluminum Electrolytic Capacitors. ►Flux between the Surface of the PW board and sealing of capacitors should be cleaned before using adhesives or coating materials. ►Solvents should be dried up before using adhesives or coating materials. Do not cover up all the sealing area of capacitors with adhesives or coating materials, make coverage only partial. 3. CAUTION DURING USE OF CAPACITORS IN SETS ►Do not touch the terminals of capacitors. ►Do not connect electrical terminals of the capacitor. Keep the capacitors free from conductive solution, such as acid, alkali and so on. ►Ensure the operational environment of the equipment in which the capacitor has been built is within the specified condition mentioned in the catalog or specification sheets. 4. MAINTENANCE ►Periodical inspection should be carried out for the capacitors, which are used with industrial equipment. Check the following points at the inspection. 4-1 Visual inspection to check pressure relief open or leakage of electrolyte. 4-2 Electrical characteristics: leakage current, capacitance, dissipation factor and the other points which are mentioned in the catalog or specifica- tion sheets. 5. EMERGENCY ACTION ►When the pressure relief vent is open and some gas blows out from the capacitor, please turn the main switch of the equipment off or pull out the plug from the power outlet immediately. ►During pressure relief vent operation, extremely hot gas (over 100˚C) may blow out from the capacitors. Do not stand close to the capacitors. In case of eye contact, flush the open eye (s) with large amount of clean water immediately. In case of ingestion, gargle with water immediately, do not swallow, do not touch electrolyte but wash skin with soap and water in case of skin contact. 6. STORAGE CONDITION ►Aluminum Electrolytic Capacitors should not be stored in high temperatures or where there is a high level of humidity. The suitable storage condition is 5˚C ~ 35˚C and less than 75% in relative humidity. ►Aluminum Electrolytic Capacitors should not be stored in damp conditions such as water, saltwater spray or oil spray. ►Do not store Aluminum Electrolytic Capacitors in an environment full of hazardous gas (hydrogen sulfide, sulfurous acid gas, nitrous acid, chlo- rine gas and ammonia or bromine gas). ►Aluminum Electrolytic Capacitors should not be stored under exposure to ozone, ultraviolet rays or radiation. 7. DISPOSAL ►Please take either of the following actions in case of disposal. 7-1 Incineration ( high temperature of more than 800˚) after crushing the capacitor’s body 7-2 Consignment to specialists of industrial waste., 4 ALUMINUM ELECTROLYTIC CAPACITORS

CAUTION FOR PROPER USE OF ALUMINUM ELECTROLYTIC CAPACITORS II

1. POLARITY MARKING OF ELECTROLYTIC CAPACITORS Please confirm the polarity to avoid applying any reverse voltage or AC voltage to the capacitors. 2. MOUNTING CAPACITORS Aluminum Electrolytic Capacitors are designed to open the pressure relief vent and release hot gas including electrolyte through it, in abnormal cases such as when reverse voltage or excess voltage was applied, or when ripple current exceeding the permissible value has flown into capaci- tors . ►Do not design to locate any wiring or circuit pattern around the capacitor’s pressure relief vent. ►The pressure relief vent bulges right before the vent operation. Ensure enough free space directly above the capacitor’s vent as shown in the below table so that bulged vent never touches to an object such as the case on cover of the set. The pressure relief vent will not open without the appropriate free space. ►The distance between the terminals holes on the circuit board should be the same as that between the lead wires or terminals of the capacitor. Excessive force in mounting on circuit boards should be avoided. Improper insertion of the lead wires in circuit board may cause electrolyte leakage, break the lead wires or impair their connection with the internal elements. When the distance between the two terminals holes on the circuit board cannot be reduced to that between the lead wires, lead formed capacitors are recommended. 3. VOLTAGE TREATMENT The following voltage treatment should be done on the capacitors that have been stored for a long time. ►Voltage Treatment Prior to the initial measurement , the capacitors shall be applied with a DC Voltage Which is equal to the Rated Voltage of the capacitor through a resistor of about 1 kΩ in series for 1 hour , and then discharged through a resistor of about 1Ω/ Volt. 4. RIPPLE CURRENT 4-1 The combined value of D.C. voltage and the peak A.C. voltage shall not exceed the rated voltage and shall not be reverse voltage. 4-2 Use of aluminum electrolytic capacitor under ripple voltage with wide amplitude is equivalent to quick charge- discharge operation. If ripple voltage with the amplitude over 70Vp-p is expected, please contact us. 5. PW BOARD CLEANING 5-1 PW board can be immersed or ultrasonically cleaned using suitable cleaning solvents for up to 5 minutes (5L and 7L is up to 3 minutes) and up to 60˚C maximum temperatures about 100wv following. The board should be thoroughly rinsed and dried. Recommended cleaning solvent include Pine Alpha ST-100S, Clean-thru 750H, IPA (isopropyl alcohol) ►The use of ozone depleting cleaning agents are not recommended in the interest of protecting the environment. ►Please consult us for additional information about acceptable cleaning solvents or cleaning methods. 5-2 Avoid using the following solvent groups unless specifically allowed for in the specification; ►Halogenated cleaning solvents: except for solvent resistant capacitor types, halogenated solvents can permeate the seal and cause internal capacitor corrosion and failure. For solvent resistant capacitors, carefully follow the temperature and time requirements of the specification. 1-1-1 trichloroethane should never be used on any aluminum electrolytic capacitor. ►Alkali solvents: could attack and dissolve the aluminum case. ►Petroleum based solvents: deterioration of the rubber seal could result. ►Xylene: deterioration of the rubber seal could result. ►Acetone: removal of the ink markings on the vinyl sleeve could result. 5-3 A thorough drying after cleaning is required to remove residual cleaning solvents which may be trapped between the capacitor and the circuit board. Avoid drying temperatures which exceed the upper category temperature of the capacitor. 5-4 Monitor the contamination levels of the cleaning solvents during use by electrical conductivity, pH, specific gravity, or water content. Chlorine levels can rise with contamination and adversely affect the performance of the capacitor. 6.ELECTROLYTE AND SEPARATOR PAPER ARE FLAMMABLE Electrolyte and separator paper used in Aluminum Electrolytic Capacitors are flammable. Also, Electrolyte is electrically conductive. Therefore, in case Electrolyte gets contact with PC board, it may cause corrosion of circuit pattern, or tracking or short circuit between patterns, and may lead to smoke generation or ignition at the worst cases. Please make considerations to the above risk in designing circuit patterns and determining the mounting method and mounting location of capaci- tors. 7. FUMIGATION AND HALOGENATED FLAME RETARDANT It may cause corrosion of internal electrodes, aluminum cases and terminal surface when the following conditions exist. 7-1 Fumigation of wooden pallets before shipment to disinfect vermin. 7-2 Existence of components or parts that contain halogenated flame retardant agent (bromine etc.) together with capacitors., ALUMINUM ELECTROLYTIC CAPACITORS 5

MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS SERIES CHART

,

PARTS NUMBER SYSTEM FOR THE RADIAL TYPE

123456789Product Series Capacitance Capacitance Rated Case Size Logo Color Option Tolerance Voltage ø(DxL)mm Product Code Cap.(μF) Code Voltage(V) Code This code depends Description Code Electrolytic 0.1 0R1 2.5 2R5 on the customers Bulk B Capacitors EC 3.3 3R3 request. It could be 0.22 R22 4 004 identified the logo TapedT1010 6.3 6R3 on the sleeve. Lead cut C 4.7 4R7 10 010 Other O 10 100 16 016 25 025 47 470 35 035 100 101 50 050 470 471 63 063 1000 102 100 100 160 160 4700 472 330 330 10000 103 450 450 Classification Code Cap. Tolerance Code Case Size Code Color Code SG ±5% J 3x5 0305 Black/Gold B SS ±10% K 4x5 0405 Black/White W SN ±20% M 4x7 0407 Green/Gold G Miniature Type MG +20-0% N 5x5 0505 Green/White H MI +20-10% V 5x7 0507 Purple/Gold P MN +30-10% Q 5x11 0511 Purple/White U ML +50-10% T 6.3(6)x5 0605 Orange 0 RG +80-20% Z 6.3(6)x7 0607 Navy-Blue/Gold N RB Special S 6.3(6)x11 0611 LL Navy-Bule/Black A8x5 0805 LG Navy-Blue/While V8x7 0807 Standard Type NP Coffee/White C8x9 0809 NG Hyal-Blue L8x10 0810 BP HyaI-Yellow Y8x11 0811

RT

8x12 0812 Hyal-White T

TH

8x14 0814 Hyal-Orange R

ME

8x16 0816

LE

8x20 0820

MZ

Low 10x10.5 1010 Impedance ZH 10x12 1012

LZ

10x15 1015

RE

10x16 1016

LA

10x20 1020 10x25 1025 10x30 1030 13x16 1316 13x21 1321 13x26 1326 16x16 1616 16x26 1626 16x32 1632, ALUMINUM ELECTROLYTIC CAPACITORS 7

TYPICAL FAILURE MODES AND THEIR FACTORS

Failure mode Failure mechanism Causes 發生原因 故障型式 內部現象 Production factor 製造時 Application factor 使用時 Short circuit Shot circuit between elec- Electrode-cutting burrs 短路 trodes (metal particles) 電極間短路 電極切割時的金屬微粒 Abnormal Open Breakdown of lead tab mechanical stress 開路 導針斷線 異常的機械壓力 Mechanical stress 機械的壓力 Insuffcient connection of lead tab 導針接觸不完全 Deterioration of Electrolyte leakage Insufficient sealing sealant material 漏電解液 密閉不完全 封口材料老化 Improper sealing 封口不完全 Use of halogenated solvent Corrosion 使用含滷化物的清洗劑 腐蝕 Halogen infiltration 滷化物滲入 Use of coating material 使用塗料 Use of adhesive 使用黏著劑 Shortage of electrolyte 電解液不足 Electrolyte deterioration Usage for a long and reduction period of time 電解液老化、減少 長時間的使用 Excessive ripple current 過大的濾波電流 Capacitance reduction Reduced anode foil tanδ increase capacitance 靜電容量減少,tanδ增加 陽極箔的靜電容量減少 Usage at a high temperature 超過額定溫度的使用 Reduced cathode foil capacitance Reverse voltage applied逆電壓的使用 陰極箔的靜電容量減少 Vent Operation Internal pressure increase Severe charging 內壓上升 / discharging壓力閥動作 過渡激烈的充放電 Leakage current increase Deterioration of oxide film Excessive voltage applied 漏電流增加 氧化膜的劣化 超過額定電壓的使用 AC voltage applied 使用交流電, 8 ALUMINUM ELECTROLYTIC CAPACITORS

TAPING SPECIFICATIONS

Lead taping is designed for automatic insertion equipment. Capacitors with case size of 10mm x 16mm or smaller are available in taping type.

PACKING (TAPING)

Available for various automatic insertion equipment. Choosing the ordinal polarity of lead of capacitors depends on customer’s request.

Ammo

Line for tear off D5(mm) W±5(mm) L±5(mm) H±5(mm) Quantity(PCS) 4 245 340 50 2500 5 245 340 50 2000 6.3 245 340 50 1500 8 245 340 50 1000 10(L≤16) 245 340 50 600

Inner Box

D(mm) A±5(mm) B±5(mm) C±5(mm) Inner Box Quantity(PCS) 4 245 340 50 10 2500 5 245 340 50 10 2000 6.3 245 340 50 10 1500 8 245 340 50 10 1000 10(L≤16) 245 340 50 10 600,

ALUMINUM ELECTROLYTIC CAPACITORS 9 SPECIFICATION TABLE

Case Size 外殼尺寸 Item Symbol Tolerance Remark 項目 符號 誤差範圍 備註 4x5 5x5 6.3x5 8x5 4x7 5x7 6.3x7 8x7 5x11 6.3x11 8x11 10x12 10x16 10x20 Lead wire diameter d 0.45 0.5 0.6 ±0.05 導針線徑 Intervals of bodies p 12.7 ±1.0 電容主體間的距離 Intervals of punches holes P0 12.7 ±0.2 孔洞間的距離 3.85 Fig1.Fig4. 5.35 5.35 Fig2. F1=5.0 ±0.5 Distance between holes and lead wire P1 5.1 5.1 5.1 ±0.7 孔洞與導針的距離 5.1 5.6 Fig2. F1=5.0 ±1.0 5.6 5.35 5.1 5.1 5.6 5.35 5.1 4.6 5.35 5.1 4.6 Fig3. F1=5.0 ±1.5 Distance between holes and bodies P2 6.35 ±1.0 孔洞與主體的距離 5.0 Fig1.Fig4. 2.0 2.0 Fig2: Distance between lead and lead F 2.5 2.5 2.5 +0.8 導針與導針的距離 -0.2 2.5 2.5 1.5 2.0 2.5 2.5 1.5 2.0 2.5 3.5 2.0 2.5 3.5 Base tape width W 18.0 ±0.5 帶子基底的寬度 Adhesive tape width W0 12.5 Min 熱溶膠帶的寬度 Deviation between holes and base tape W1 9.0 ±0.5 孔洞與帶緣的距離 Distance between body button and tape center W2 1.5 Max 主體底部到帶子中心點的距離 Distance between body bottom and tape center H 17.5 18.5 ±0.75 主體底部到帶子中心點的距離 Lead wire clinched height H0 16.0 ±0.5 Fig1.2 導針彎折的高度 Distance between body top and tape center H1 24.5 27.5 32.5 33.0 36.0 38.0 Max 主體上端到帶子中心點的距離 Punched hole diameter D0 4.0 ±0.3 孔洞的直徑 Lead wire protrusion ℓ 1.0 Max 導針突出部分 Length of not good lead slit L 11.0 Max 不良導針裁切長度 Base and adhesive tape thickness t 0.7 ±0.3 熱溶膠帶的厚度 Deviation of body alignment Δh 0 ±2.0 主體排列的偏差度 Deviation of body alignment Δh1 0 ±1.0 主體排列的偏差度, 10 ALUMINUM ELECTROLYTIC CAPACITORS

TAPED AND REELED (AXIAL)

This specification describes the lead taping packaging for electrolytic capacitor with axial lead and radial lead for automatic insertion systems.

TAPING SPECIFICATIONS Figure 2 Reel

1.Taping dimensions are indicated if Figure 1. 2.To identify the orientation, the cathode tape shall be blue and the an- node tape shall be white. 3.A minimum 350mm leader tape shall be provided before the first and after the last capacitor on reel. 4.Taped capacitors shall be wound on a packing reel shown on Figure 2. 5.Finished reel shall be packaged in the packaging box shown on Figure 3.

QUANTITY OF PACKAGING

Dia. of capacitor (mm) Reel(pcs) Ammo.(pcs) 5 2000 1500 W 52 63 73 6 1500 1000 8 1000 1000 B 68 80 90 10 500 500 W : Inside distance between tapes. Note : Above quantities principle. B : Inside distance between flanges. Some difference may be provided.

Figure 1 Taping Figure 3 Packing Box

Symbol Dimension(mm) D 5, 6, 8, 10 d 0.5, 0.6 P 10 (For Dia. 5, 6, 8), 15 (For Dia. 10) W 52+1.5-1.0, 63+1.5-1.0, 73±1.5 W 52 63 73 g 0.6 max L-1 ~ L-2 1.0 max A 81 93 103 Z 1.2 max t 3.2 min (Lead ends shall not extend beyond the tape.) W : Inside distance between tapes. T 6.0±0.5 A : Width of packaging box. Unit(mm), ALUMINUM ELECTROLYTIC CAPACITORS 11

LEAD CUT AND FORMING

Straight lead cut: Lead cut for radial lead type is available Standard cut lead length is 3.0±0.5mm 3.0 Hockey stick lead forming Available for less than 8mm Dia. Products only. Self-mounting radial lead type (a). Case Dia. 5Ø, 6Ø and 8Ø Self-mounting radial lead type (b).Case Dia 10Ø, 13Ø, 16Ø, and 18Ø Case Dia. D H1±0.5 H2 F±0.5d55.0 2.7 5.0 0.5 6 5.0 2.7 5.0 0.5 8 5.0 2.7 5.0 0.5 10 5.0 2.7 5.0 0.6 13 5.0 2.7 5.0 0.6 16 5.0 2.7 7.5 0.8 18 5.0 2.7 7.5 0.8, 12 ALUMINUM ELECTROLYTIC CAPACITORS

PACKING SPECIFICATION (BULK)

CAPACITOR NUMBER of OUTER CASE SIZE INNER BAG BAGS INNER BOX OUTER BOX BAG SIZE INNER BOX CARTON (mm) Q’TY (PER INNER Q’TY Q’TY (cm) SIZE (cm) SIZEBOX) (cm) Ø4x5 2000 20 40000 80000 19x22 Ø4x7 2000 20 40000 80000 19x22 Ø5x5 2000 15 30000 60000 19x22 Ø5x7 2000 15 30000 60000 19x22 Ø5x11 1000 15 20000 40000 19x22 Ø6x5 2000 10 20000 40000 23x23 Ø6.3x7 2000 10 20000 40000 23x23 Ø6.3x11 1000 15 15000 30000 19x22 Ø8x9 1000 8 8000 16000 18x30 Ø8x11 500 12 6000 12000 18x30 Ø8x12 1000 6 6000 12000 18x30 Ø8x14 500 12 6000 12000 18x30 Ø8x15 500 12 6000 12000 18x30 Ø8x20 500 10 5000 10000 18x30 29x18x23 39x32x25 Ø10x12 500 10 5000 10000 18x30 Ø10x15 500 8 4000 8000 18x30 Ø10x16 400 10 4000 8000 18x30 Ø10x20 300 10 3000 6000 18x30 Ø10x25 250 10 2500 5000 18x30 Ø12.5x20 200 9 1800 3600 18x30 Ø13x15~18 500 8 4000 8000 19x22 Ø13x21 150 10 1500 3000 18x30 Ø13x25 150 10 1500 3000 18x30 Ø13x31 80 15 1200 2400 18x30 Ø16x26 100 12 1200 2400 18x30 Ø18x32 40 20 800 1600 18x30 Ø18x36 40 20 600 1200 18x30 Ø18x41 40 20 600 1200 18x30, ALUMINUM ELECTROLYTIC CAPACITORS 13 ELECTROLYTIC CAPACITORS FLOW CHART

IQC

SEPARATOR CATHODE FOIL

IQC STITCHING

IQC IPQC ELECTROLYTE ANODE FOIL IMPREGNATION SLITTING SEAL IQC ASSEMBLY LEAD WIRE WASH WINDING

IPQC

SLEEVING IQC RUBBER BUNG

LOADING

ALUMINUM CAN

AGING IQC SLEEVE IQC TESTING

IPQC APPEARANCE INSPECTION LEAD CUTTING OR TAPING

QA PACKING COMPLETION OQC DELIVERY

,

SG SG Series ALUMINUM ELECTROLYTIC CAPACITORS FEATURES

Super Miniature - 5mm

SPECIFICATION

Item Characteristic Operation Temperature -40 ~ 85°C Rated Working Voltage 4 ~ 50 V.DC Capacitance Tolerance (120Hz 20°C) ±20% (M) Leakage Current I ≤ 0.01CV or 3 (μA) max I : Leakage Current(μA) (120Hz 20°C) Whichever is greater after 2 minutes C : Rated Capacitance(μF) V : Rated Voltage(V) Surge Voltage WV 4 6.3 10 16 25 35 50 (120Hz 20°C) SV5813 20 32 44 63 Dissipation Factor WV 4 6.3 10 16 25 35 50 (120Hz 20°C)(tan δ) tanδ 0.35 0.24 0.20 0.16 0.14 0.12 0.10 Impedance ratio at 120Hz Rated Votage (V) 4 6.3 10 16 25 35 50 Low Temperature Stability -25°C/+25°C7432222-40°C /+25°C 15864433After 1000 hours application WV at +85°C, the capacitor shall meet the following limits. Capacitance Change ≤ ±25% of initial value Endurance (Load Life) Dissipation Factor ≤ 200% of initial specified value Leakage Current ≤ initial specified value After 500 hours application of WV at +85°C the capacitor shall meet the following limits. Capacitance Change ≤ ±25% of initial value Shelf Life Dissipation Factor ≤ 200% of initial specified value Leakage Current ≤ initial specified value

DIMENSIONS (mm)

D456.38F1.5 2.0 2.5 3.5 d 0.45 0.45 0.45 0.50 L + α(max) α 1.5 1.5 1.5 1.5, ALUMINUM ELECTROLYTIC CAPACITORS 15

SG CASE SIZE & MAX RIPPLE CURRENT

WV 4 / 0G 63 / 0J 10 / 1A 16 / 1C 25 / 1E 35 / 1V 50 / 1H µF ITEM DxL R.C. DxL R.C. DxL R.C. DxL R.C. DxL R.C. DxL R.C. DxL R.C. 0.1 → 4x5 3 0.15 → 4x5 4 0.22 → 4x5 4 0.33 → 4x5 5 0.47 → 4x5 6 0.68 → 4x5 8 1.0 → 4x5 9 1.5 → 4x5 12 2.2 → 4x5 13 4x5 14 3.3 → 4x5 14 4x5 16 4x5 17 4.7 → 4x5 16 4x5 17 4x5 19 4x5 20 6.8 → 4x5 17 4x5 19 4x5 21 5x5 26 6.3x5 32 4x5 25 10 → 4x5 19 4x5 21 4x5 24 5x5 31 6.3x5 39 5x5 28 15 → 4x5 24 4x5 26 5x5 33 5x5 35 6.3x5 44 6.3x5 48 4x5 31 4x5 33 5x5 43 6.3x7 60 22 4x5 24 4x5 29 6.3x5 55 5x5 36 5x5 40 6.3x5 55 8x7 70 4x5 35 4x5 38 5x5 49 6.3x5 33 4x5 29 6.3x5 60 65 8x7 85 5x5 40 5x5 44 6.3x5 55 8x7 5x5 50 5x5 50 6.3x5 70 47 4x5 35 5x5 48 8x7 75 6.3x5 60 6.3x5 65 8x7 85 68 5x5 47 6.3x5 65 6.3x5 70 6.3x5 80 8x7 100 6.3x5 90 6.3x5 100 100 6.3x5 65 6.3x5 80 8x7 120 8x7 100 8x7 110 200 6.3x5 100 8x7 140 8x7 150 330 8x7 140 8x7 170,

SS SS Series ALUMINUM ELECTROLYTIC CAPACITORS FEATURES

Super Miniature Height 5mm for 105˚C

SPECIFICATION

Item Characteristic Operation Temperature Range -40 to +105°C Rated Working Voltage 4 – 50 V.DC Capacitance Tolerance (120Hz 20°C) ±20% (M) Leakage Current I ≤ 0.01CV or 3 (μA) max I : Leakage Current(μA) (120Hz 20°C) Whichever is greater after 2 minutes C : Rated Capacitance(μF) V : Rated Voltage(V) WV 4 6.3 10 16 25 35 50 Surge Voltage (120Hz 20°C) SV5813 20 32 44 63 WV 4 6.3 10 16 25 35 50 Dissipation Factor (120Hz 20°C) (tanδ) tanδ 0.37 0.28 0.24 0.20 0.16 0.13 0.12 Impedance ratio at 120Hz Rated Voltage (V) 4 6.3 10 16 25 35 50 Low Temperature Stability -25°C/ +25°C6332222-40°C / +25°C 12854333After 1000 hours application of WV at +105°C the capacitor shall meet the following limits. Capacitance Change ≤ ±25% of initial value Load Life Dissipation Factor ≤ 200% of initial specified value Leakage Current ≤ initial specified value After 500 hours application of WV at + 105°C the capacitor shall meet the following limits Capacitance Change ≤ ±25% of initial value Shelf Life Dissipation Factor ≤ 200% of initial specified value Leakage Current ≤ initial specified value, ALUMINUM ELECTROLYTIC CAPACITORS 17

SS DIMENSIONS (mm)

D3456.3 8x5 8x7 F 1.0 1.5 2.0 2.5 3.5 3.5 d 0.40 0.45 0.45 0.45 0.45 0.50 α 1.0 1.0 1.2 1.3 1.5 1.5 L + α(max)

CASE SIZE & MAX RIPPLE CURRENT

WV 4 / 0G 6.3 / 0J 10 / 1A 16 / 1C 25 / 1E 35 / 1V 50 / 1H µF ITEM D×L R.C. D×L R.C. D×L R.C. D×L R.C. D×L R.C. D×L R.C. D×L R.C. 3x5 1 0.1 → 4x5 2 3x5 2 0.22 → 4x5 4 3x5 2.8 0.33 → 4x5 4 3x5 4 0.47 → 4x5 5 3x5 7 1.0 → 4x5 8 3x5 7 2.2 → 4x5 11 4x5 10 3x5 11 3x5 11 3.3 → 3x5 10 4x5 13 4x5 14 4x5 25 4.7 → 3x5 11 4x5 14 4x5 15 5x5 19 3x5 14 4x5 20 5x5 25 10 → 3x5 13 6.3x5 31 4x5 19 5x5 23 6x5 28 4x5 28 22 4x5 19 4x5 23 5x5 29 6.3x5 39 6.3x5 42 5x5 32 4x5 32 33 5x5 26 5x5 32 6.3x5 45 6.3x5 48 8x5 66 5x5 35 5x5 42 5x5 46 47 5x5 32 5x5 38 6.3x5 50 8x5 72 6.3x5 48 6.3x5 50 5x5 48 6.3x5 80 100 6.3x5 55 6.3x5 72 8x5 99 6.3x5 65 8x5 99 6.3x5 75 8x5 120 8x5 110 220 6.3x5 68 8x7 155 8x5 104 8x7 132 8x7 140 330 8x5 110 8x5 115 8x7 120 All blank voltage on sleeve marking is the same voltage as “→” point to.,

SN SN Series ALUMINUM ELECTROLYTIC CAPACITORS FEATURES

Non-Polarized Hight 5mm For 85°C

SPECIFICATION

Item Characteristic Operation Temperature Range -40 to +85°C Rated Working Voltage 6.3 – 50 V.DC Capacitance Tolerance (120Hz 20°C) ±20% (M) Leakage Current I ≤ 0.05CV or 10 (μA) max I : Leakage Current(μA) (120Hz 20°C) Whichever is greater after 2 minutes C : Rated Capacitance(μF) V : Working Voltage(V) Surge Voltage WV 6.3 10 16 25 35 50 (120Hz 20°C) SV 8 13 20 32 44 63 Dissipation Factor WV 6.3 10 16 25 35 50 (120Hz 20°C) (tanδ) tanδ 0.24 0.20 0.17 0.17 0.15 0.15 Impedance ratio at 120Hz Rated Voltage (V) 6.3 10 16 25 35 50 Low Temperature Stability -25°C / +25°C432222-40°C / +25°C 1086433After 1000 hours application of WV at +85°C the capacitor shall meet the following limits. (The polarity needs to exchange every 250 hours) Load Life Capacitance Change ≤ ±25% of initial value Dissipation Factor ≤ 200% of initial specified value Leakage Current ≤ initial specified value After +85°C no voltage application after 1000 hours and then through the aging treatment (reference JIS C 5101-1), the capacitor shall meet the limits for load life characteristics. Shelf Life Capacitance Change ≤ ±25% of initial value Dissipation Factor ≤ 200% of initial specified value Leakage Current ≤ initial specified value

DIMENSIONS (mm)

D456.3 F 1.5 2.0 2.5 d 0.45 0.45 0.45 α 1.0 1.2 1.3 L + α(max)

CASE SIZE & MAX RIPPLE CURRENT

WV 6.3 / 0J 10 / 1A 16 / 1C 25 / 1E 35 / 1V 50 / 1H µF ITEM D×L R.C. D×L R.C. D×L R.C. D×L R.C. D×L R.C. D×L R.C. 0.1 → 4x5 1 0.22 → 4x5 2 0.33 → 4x5 2.8 0.47 → 4x5 4 1.0 → 4x5 8.4 2.2 → 4x5 8.4 5x5 13 3.3 → 5x5 12 5x5 16 5x5 17 4.7 → 4x5 12 5x5 16 5x5 18 6.3x5 20 10 4x5 14 4x5 17 5x5 23 6.3x5 27 6.3x5 29 22 5x5 28 6.3x5 33 6.3x5 37 33 6.3x5 37 6.3x5 41 6.3x5 49 47 6.3x5 45 All blank voltage on sleeve marking is the same voltage as “→” point to.,

MG 19MGSeries ALUMINUM ELECTROLYTIC CAPACITORS FEATURES

Smaller Size - 7mm

SPECIFICATION

Item Characteristic Operation Temperature Range -40 to +85°C Rated Working Voltage 4 - 63 V.DC Capacitance Tolerance (120Hz 20°C) ±20% (M) Leakage Current I ≤ 0.01CV or 3 (μA) max I : Leakage Current(μA) (120Hz 20°C) Whichever is greater after 2 minutes C : Rated Capacitance(μF) V : Working Voltage(V) Surge Voltage WV 4 6.3 10 16 25 35 50 63 (120Hz 20°C) SV5813 20 32 44 63 79 Dissipation Factor WV 4 6.3 10 16 25 35 50 63 (120Hz 20°C) (tanδ) tanδ 0.35 0.24 0.20 0.17 0.15 0.12 0.10 0.10 Impedance ratio at 120Hz Rated Voltage (V) 4 6.3 10 16 25 35 50 63 Low Temperature Stability -25°C / +25°C64322222-40°C / +25°C 128644333After 1000 hours application ofWVat +85°C the capacitor shall meet the following limits. Capacitance Change ≤ ±25% of initial value Load Life Dissipation Factor ≤ 200% of initial specified value Leakage Current ≤ initial specified value After 500 hours application ofWVat +85°C the capacitor shall meet the following limits. Capacitance Change ≤ ±25% of initial value Shelf Life Dissipation Factor ≤ 200% of initial specified value Leakage Current ≤ initial specified value

DIMENSIONS (mm)

D456.38F1.5 2.0 2.5 3.5 d 0.45 0.50 0.50 0.50 L + α(max) α 1.0 1.3 1.3 1.5, 20 ALUMINUM ELECTROLYTIC CAPACITORS

MG CASE SIZE & MAX RIPPLE CURRENT

WV 4 / 0G 6.3 / 0J 10 / 1A 16 / 1C µF ITEM DxL R. C. DxL R. C. DxL R.C. DxL R. C. 10 4x7 28 22 4x7 34 4x7 38 4x7 42 33 4x7 33 4x7 42 4x7 46 5x7 62 47 4x7 39 4x7 50 5x7 66 5x7 73 100 5x7 65 5x7 87 6.3x7 99 6.3x7 110 220 6.3x7 110 6.3x7 133 8x7 165 8x7 145 330 8x7 165 8x7 180 8x7 210 470 8x7 190 WV 25 / 1E 35 / 1V 50/ 1H 63 / 1J µF ITEM DxL R. C. DxL R. C. DxL R.C. DxL R. C. 0.1 4x7 1.3 4x7 1.3 0.22 4x7 3.0 4x7 3.0 0.33 4x7 4.4 4x7 4.4 0.47 4x7 6.3 4x7 6.3 1 4x7 12 4x7 12 2.2 4x7 16 4x7 16 3.3 4x7 118 4x7 19 5x7 24 4.7 4x7 21 4x7 22 4x7 24 6.3x7 33 10 4x7 31 5x7 32 5x7 42 6.3x7 45 22 5x7 55 6.3x7 60 6.3x7 64 33 6.3x7 66 6.3x7 73 8x7 75 47 6.3x7 80 8x7 95 8x7 85 100 8x7 115 8x7 115,

MI 21M ISeries ALUMINUM ELECTROLYTIC CAPACITORS FEATURES

General Used Height 7mm For 105°C

SPECIFICATION

Item Characteristic Operation Temperature Range -40 to +105°C Rated Working Voltage 6.3 – 50 V.DC Capacitance Tolerance (120Hz 20°C) ±20% (M) Leakage Current I ≤ 0.01CV or 3 (uA) max I : Leakage Current(uA) (120Hz 20°C) Whichever is greater after 2 minutes C : Rated Capacitance(μF) V : Rated Voltage(V) Surge Voltage WV 6.3 10 16 25 35 50 (120Hz 20°C) SV 8 13 20 32 44 63 Dissipation Factor WV 6.3 10 16 25 35 50 (120Hz 20°C) (tanδ) tanδ 0.24 0.20 0.17 0.15 0.12 0.10 Impedance ratio at 120Hz Rated Voltage (V) 6.3 10 16 25 35 50 Low Temperature Stability -25°C / +25°C322222-40°C / +25°C654333After 1000 hours application ofWVat + 105°C the capacitor shall meet the following limits Capacitance Change ≤ ±25% of initial value Load Life Dissipation Factor ≤ 200% of initial specified value Leakage Current ≤ initial specified value After 500 hours application ofWVat + 105°C the capacitor shall meet the following limits Capacitance Change ≤ ±25% of initial value Shelf Life Dissipation Factor ≤ 200% of initial specified value Leakage Current ≤ initial specified value

DIMENSIONS (mm)

D456.38F1.5 2.0 2.5 3.5 d 0.45 0.50 0.50 0.50 L + α(max) α 1.0 1.3 1.3 1.5, 22 ALUMINUM ELECTROLYTIC CAPACITORS

M I CASE SIZE & MAX RIPPLE CURRENT

WV 6.3 / 0J 10 / 1A 16 / 1C µF ITEM D×L R.C. D×L R.C. D×L R.C. 0.1 0.22 0.33 0.47 1.0 2.2 3.3 4.7 10 → 4x7 29 4x7 34 4x7 32 22 4x7 34 5x7 38 5x7 42 4x7 34 4x7 38 5x7 44 5x7 42 5x7 47 6.3x7 60 4x7 34 4x7 38 47 5x7 60 5x7 50 5x7 47 68 6.3x7 65 4x7 100 50 5x7 70 6.3x7 70 5x7 150 6.3x7 85 6.3x7 85 6.3x7 6.3x7 97 220 6.3x7 77 87 8x7 8x9 140 330 6.3x7 80 8x7 110 8x7 120 470 8x7 120 8x9 190 WV 25 / 1E 35 / 1V 50 / 1H 63 / 1J µF ITEM D×L R.C. D×L R.C. D×L R.C. D×L R.C. 0.1 → 4x7 1 0.22 → 4x7 2.3 0.33 → 4x7 3.5 0.47 → 4x7 5 1.0 → 4x7 10 6.3x7 55 2.2 → 4x7 19 3.3 → 4x7 24 4x7 25 4.7 → 4x7 24 5x7 29 4x7 30 5x7 40 10 4x7 29 5x7 36 6.3x7 44 5x7 39 22 5x7 36 6.3x7 65 6.3x7 60 5x7 43 5x7 45 6.3x7 64 6.3x7 51 6.3x7 72 8x7 75 5x7 47 65 6.3x7 70 8x7 85 6.3x7 6.3x7 100 125 8x9 220 8x9 140,

MN 23MNSeries ALUMINUM ELECTROLYTIC CAPACITORS FEATURES

Non-Polarized Hight 7mm For 85°C

SPECIFICATION

Item Characteristic Operation Temperature Range -40 to +85°C Rated Working Voltage 6.3 – 50 V.DC Capacitance Tolerance (120Hz 20°C) ±20% (M) Leakage Current I ≤ 0.05CV or 10 (µA) max I : Leakage Current(µA) (120Hz 20°C) Whichever is greater after 2 minutes C : Rated Capacitance(µF) V : Rated Voltage(V) Surge Voltage W.V. 6.3 10 16 25 35 50 (120Hz 20°C) S.V. 8 13 20 32 44 63 Dissipation Factor W.V. 6.3 10 16 25 35 50 (120Hz 20°C) (tanδ) tanδ 0.24 0.20 0.17 0.15 0.12 0.12 Impedance ratio at 120Hz Rated Voltage (V) 6.3 10 16 25 35 50 Low Temperature Stability -25°C / +25°C432222-40°C / +25°C 1086433After 1000 hours application of WV at +85°C the capacitor shall meet the following limits. (The polarity needs to exchange every 250 hours) Load Life Capacitance Change ≤ ±25% of initial value Dissipation Factor ≤ 150% of initial specified value Leakage Current ≤ initial specified value After 500 hours application of WV at + 85°C the capacitor shall meet the following limits. Shelf Life Capacitance Change ≤ ±25% of initial value Dissipation Factor ≤ 200% of initial specified value Leakage Current ≤ initial specified value

DIMENSIONS (mm)

D456.3 F 1.5 2.0 2.5 d 0.45 0.50 0.50 L + 2(max)

CASE SIZE & MAX RIPPLE CURRENT

WV 6.3 / 0J 10 / 1A 16 / 1C 25 / 1E 35 / 1V 50 / 1H µF ITEM D×L R.C. D×L R.C. D×L R.C. D×L R.C. D×L R.C. D×L R.C. 0.1 → 4x7 3 0.22 → 4x7 4 0.33 → 4x7 5 0.47 → 4x7 6 1.0 → 4x7 9 2.2 → 4x7 14 5x7 16 3.3 → 4x7 15 5x7 19 5x7 19 4.7 → 4x7 17 5x7 20 5x7 23 6.3x7 26 10 → 4x7 23 5x7 28 6.3x7 34 6.3x7 38 8x7 44 22 5x7 35 5x7 38 6.3x7 47 6.3x7 50 8x7 65 8x7 65 33 5x7 43 6.3x7 55 6.3x7 60 8x7 70 8x7 80 47 6.3x7 60 6.3x7 65 6.3x7 70 8x7 85 100 8x7 100 8x7 110 8x7 120 All blank voltage on sleeve marking is the same voltage as “→” point to.,

ML MLSeries ALUMINUM ELECTROLYTIC CAPACITORS FEATURES

Low Leakage For Smaller Size

SPECIFICATION

Item Characteristic Operation Temperature Range -40 to +85°C Rated Working Voltage 6.3 ~ 50 V.DC Capacitance Tolerance (120Hz 20°C) ±20% (M) Leakage Current I ≤ 0.02CV or 0.4 (μA) max I : Leakage Current(μA) (120Hz 20°C) Whichever is greater after 2 minutes C : Rated Capacitance(μF) V : Working Voltage(V) Surge Voltage WV 6.3 10 16 25 35 50 (120Hz 20°C) SV 8 13 20 32 44 63 WV 6.3 10 16 25 35 50 Dissipation Factor (120Hz 20°C) (tanδ) tanδ 0.22 0.19 0.16 0.14 0.12 0.10 When rated capacitance is over 1000µF, tanδ shall be added 0.02 to the listed value with increase of every 1000µF. Impedance ratio at 120Hz Rated Voltage (V) 6.3 10 16 25 35 50 Low Temperature Stability -25°C / +25°C432222-40°C / +25°C864433After 1000 hours application ofWVat +85°C the capacitor shall meet the following limits. Capacitance Change ≤ ±25% of initial value Load Life Dissipation Factor ≤ 200% of initial specified value Leakage Current ≤ initial specified value After 500 hours application ofWVat +85°C the capacitor shall meet the following limits. Capacitance Change ≤ ±25% of initial value Shelf Life Dissipation Factor ≤ 200% of initial specified value Leakage Current ≤ initial specified value

DIMENSIONS (mm)

D456.38F1.5 2.0 2.5 3.5 d 0.45 0.50 0.50 0.50 L + α(max) α 1.5 1.5 1.5 1.5, ALUMINUM ELECTROLYTIC CAPACITORS 25

ML MULTIPLIER FOR RIPPLE CURRENT

Frequency (Hz) 60(50) 125 500 1k 100k 0.1~1µF 0.50 1.00 1.20 1.30 1.50 2.2~4.7µF 0.65 1.00 1.20 1.30 1.50 Coefficient 10~47µF 0.80 1.00 1.20 1.30 1.50 100~1000µF 0.80 1.00 1.10 1.15 1.20 2200µF 0.80 1.00 1.05 1.10 1.15

CASE SIZE & MAX RIPPLE CURRENT

WV 6.3(0J) 10(1A) 16(1C) 25(1E) 35(1V) 50(1H) µF ITEM Size R.C. Size R.C. Size R.C. Size R.C. Size R.C. Size R.C. 0.1 4x7 1.0 022 4x7 2.3 033 4x7 3.5 047 4x7 5.0 1 4x7 10 2.2 4x7 16 3.3 4x7 19 4.7 4x7 21 4x7 22 5x7 29 10 4x7 28 5x7 33 5x7 32 6.3x7 44 22 4x7 34 5x7 38 5x7 44 6.3x7 55 6.3x7 60 8x7 65 33 5x7 42 5x7 47 6.3x7 62 6.3x7 65 8x7 73 47 5x7 50 6.3x7 66 6.3x7 73 8x7 80 100 6.3x7 87 8x7 99 8x7 110 220 8x7 133,

RG RGSeries ALUMINUM ELECTROLYTIC CAPACITORS FEATURES

General Used Standard Size

SPECIFICATION

Item Characteristic Operation Temperature Range -40 to + 85°C -25 to + 85°C Rated Working Voltage 6.3 - 100 V.DC 160 - 450 V.DC Capacitance Tolerance (120Hz 20°C) ±20% (M) I ≤ 0.01CV or 4 (μA) I ≤ 0.03CV + 40 (μA) max Leakage Current (120Hz 20°C) I : Leakage Current(μA) Whichever is greater after 3 minutes C : Rated Capacitance(μF) V : Rated Voltage(V) Surge Voltage WV 6.3 10 16 25 35 50 63 100 160 200 250 350 400 450 (120Hz 20°C) SV 8 13 20 32 44 63 79 125 200 250 300 400 450 500 Add 0.02 per 1000μF for more than 1000μF Dissipation Factor WV 6.3 10 16 25 35 50 63 100 160 200 250 350 400 450 (120Hz 20°C) (tanδ) tanδ 0.22 0.19 0.16 0.14 0.12 0.10 0.10 0.08 0.15 0.20 0.20 0.25 0.25 0.25 Impedance ratio at 120Hz Rated Voltage (V) 6.3 10 16 25 35-100 160-250 350-450 Low Temperature Stability -25°C / +25°C43222812 -40°C / +25°C86433After 1000 hours application ofWVat + 85°C the capacitor shall meet the following limits Capacitance Change ≤ ±25% of initial value Load Life Dissipation Factor ≤ 200% of initial specified value Leakage Current ≤ initial specified value After 500 hours application ofWVat + 85°C the capacitor shall meet the following limits Capacitance Change ≤ ±25% of initial value Shelf Life Dissipation Factor ≤ 200% of initial specified value Leakage Current ≤ 200% of initial specified value

RIPPLE CURRENT FOR FREQUENCY MULTIPLIERS

Frequency (Hz) 60 120 1K ≥ 10K CAP(μF) Multiplier 6.3-25V 0.85 1.00 1.10 1.20 35-100V 0.80 1.00 1.15 1.25

CASE SIZE OF RADIAL TYPE Vent (except Ø5 & Ø6.3)

D 5 6.3 8 10 13 16 18 22 25 F 2.0 2.5 3.5 5.0 5.0 7.5 7.5 10.0 12.5 d 0.5 0.5 0.5 0.6 0.6 0.8 0.8 0.8 0.8 L + 2(max), ALUMINUM ELECTROLYTIC CAPACITORS 27

RG CASE SIZE & MAX RIPPLE CURRENT

WV 6.3 / 0J 10 / 1A 16 / 1C 25 / 1E 35 / 1V 50 / 1H 63 / 1J Case Ripple Case Ripple Case Ripple Case Ripple Case Ripple Case Ripple Case Ripple µF Size Current Size Current Size Current Size Current Size Current Size Current Size Current (mm) (mA) (mm) (mA) (mm) (mA) (mm) (mA) (mm) (mA) (mm) (mA) (mm) (mA) 0.1 5x11 1 0.22 5x11 2 0.33 5x11 3 0.47 5x11 5 5x11 5 1.0 5x11 10 5x11 10 2.2 5x11 23 5x11 29 3.3 5x11 35 5x11 40 4.7 5x11 20 5x11 25 5x11 30 5x11 35 5x11 40 5x11 45 10 5x11 35 5x11 40 5x11 50 5x11 60 5x11 65 5x11 70 22 5x11 35 5x11 55 5x11 75 5x11 90 5x11 95 5x11 100 6.3x11 115 33 5x11 55 5x11 80 5x11 110 5x11 115 5x11 120 6.3x11 125 6.3x11 130 8x11 140 47 5x11 75 5x11 95 5x11 130 5x11 135 5x11 120 6.3x11 140 6.3x11 140 8x11 150 8x11 190 100 5x11 130 5x11 180 5x11 6.3x11 185 6.3x11 200 8x11 230 8x11 230 10x12 250 10x12 300 220 5x11 200 6.3x11 250 6.3x11 8x11 290 8x11 290 10x12 380 10x15 410 6.3x11 240 8x11 320 10x12 340 10x12 370 10x15 440 10x20 490 330 6.3x11 260 8x11 330 8x11 360 8x15 380 10x12 420 10x15 490 10x20 540 8x11 300 10x12 420 10x15 490 10x20 580 13x21 680 470 6.3x11 330 8x11 400 8x11 400 10x12 460 10x20 510 10x20 610 8x11 380 10x12 470 10x15 540 13x21 640 13x21 760 13x25 880 1000 8x11 460 10x12 580 10x15 630 10x20 760 13x21 950 13x25 1100 16x26 1310 10x12 580 10x15 630 10x20 790 13x21 950 13x25 1100 16x26 1350 16x32 1550 2200 10x20 840 10x20 880 13x21 1100 13x25 1300 16x26 1600 16x36 1850 13x21 1050 13x21 1100 13x25 1350 16x26 1550 16x32 1800 18x36 2090 18x42 2200 3300 10x20 1000 13x21 1250 13x25 1400 16x26 1660 16x36 1970 18x36 2170 13x21 1250 13x25 1400 16x26 1700 16x32 1950 18x36 2220 18x42 2400 22x42 2500 4700 13x21 1300 13x25 1500 16x26 1800 16x32 1950 16x26 1700 16x26 1800 16x32 2100 18x36 2360 18x36 2400 22x35 2500 6800 16x26 1900 16x26 1900 16x36 2200 16x32 2150 18x36 2500 18x36 2550 22x42 2600 10000 16x26 1900 16x36 16x32 2250 18x36 2500 18x36 2700 22x42 2800 15000 16x36 2500 18x36 2880 18x36 2950 22x42 3150 22x42 3200 22000 18x42 3650 22x42 3700 22x42 3800, 28 ALUMINUM ELECTROLYTIC CAPACITORS

RG

100 / 2A 160 / 2C 200 / 2D 250 / 2E 350 / 2V 400 / 2G 450 / 2W

WV

µF Case Ripple Case Ripple Case Ripple Case Ripple Case Ripple Case Ripple Case Ripple Size Current Size Current Size Current Size Current Size Current Size Current Size Current (mm) (mA) (mm) (mA) (mm) (mA) (mm) (mA) (mm) (mA) (mm) (mA) (mm) (mA) 0.47 5x11 10 5x11 12 5x11 14 5x11 14 5x11 14 6.3x11 14 6.3x11 14 1.0 5x11 21 5x11 17 5x11 19 6.3x11 19 6.3x11 19 6.3x11 19 8x11 19 2.2 5x11 30 6.3x11 26 6.3x11 22 6.3x11 24 8x11 26 8x11 27 8x11 30 8x11 33 10x12 33 10x12 33 3.3 5x11 45 6.3x11 30 6.3x11 30 8x11 30 8x11 33 8x11 35 8x11 37 10x12 38 10x12 39 10x12 40 10x15 42 4.7 5x11 50 6.3x11 32 8x11 36 8x11 36 10x12 39 8x11 40 10x12 45 10x12 45 10x15 45 10x15 45 10x15 50 10 6.3x11 75 8x11 50 10x12 57 10x12 65 10x15 70 10x15 70 10x15 70 10x20 56 13x21 60 13x21 70 13x25 75 22 8x11 130 10x15 110 10x15 120 10x20 130 13x21 130 13x25 110 16x26 130 16x26 130 33 8x11 140 10x20 150 10x20 160 13x21 140 13x25 170 16x26 170 16x32 160 10x12 170 13x25 160 16x36 180 47 10x12 190 13x21 180 13x21 160 13x25 210 16x26 220 16x26 180 18x36 200 10x15 230 13x25 190 16x32 220 18x42 230 100 10x20 400 13x25 250 16x26 300 16x26 330 16x32 310 18x36 360 18x36 360 22x42 370 220 13x25 710 16x32 450 18x32 16x36 510 18x36 600 18x42 600 330 13x25 720 18x36 540 18x36 16x26 860 18x42 600 18x42 800 470 16x26 1100 22x42 900 18x42 1000 1000 18x42 1350 2200 22x42 2300,

RB 29RBSeries ALUMINUM ELECTROLYTIC CAPACITORS FEATURES

General Used Standard Size

SPECIFICATION

Item Characteristic Operation Temperature Range -40 to + 105°C -25 to + 105°C Rated Working Voltage 6.3 - 100 V.DC 160 – 450 V.DC Capacitance Tolerance (120Hz 20°C) ±20% (M) Rated voltage ≤100V >100V Time After 2 minutes After 5 minutes Leakage Current (120Hz 20°C) Leakage Current I=0.01CV or 3(μA) CV ≤ 1000 CV > 1000Whichever is greater I = 0.03CV+15(μA) I = 0.02CV+25(μA) C = Rated Capacitance (μF) V =Rated Voltage (V) Surge Voltage WV 6.3 10 16 25 35 50 63 100 160 200 250 350 400 450 (120Hz 20°C) SV 8 13 20 32 44 63 79 125 200 250 300 400 450 500 Dissipation Factor WV 6.3 10 16 25 35 50 63 100 160 200 250 350 400 450 (120Hz 20°C) (tanδ) tanδ 0.24 0.20 0.17 0.15 0.12 0.10 0.10 0.08 0.20 0.20 0.20 0.25 0.25 0.25 Impedance ratio at 120Hz Rated Voltage (V) 6.3 10 16 25 35-100 160-250 350-450 Low Temperature Stability -25°C/ +25°C43222812 -40°C/ +25°C 108643After 2000 hours application ofWVat + 105°C the capacitor shall meet the following limits Endurance Capacitance Change ≤ ±25% of initial value (Load Life) Dissipation Factor ≤ 200% of initial specified value Leakage Current ≤ 200% specified value After 1000 hours application ofWVat + 105°C the capacitor shall meet the following limits Capacitance Change ≤ ±25% of initial value Shelf Life Dissipation Factor ≤ 200% of initial specified value Leakage Current ≤ 200% of initial specified value

RIPPLE CURRENT FOR FREQUENCY MULTIPLIERS

Frequency (Hz) 50 120 300 1K 10K CAP(μF) 0.1-47 0.75 1.00 1.35 1.57 2.00 100-470 0.80 1.00 1.23 1.34 1.50 1000-15000 0.85 1.00 1.10 1.13 1.15 0.47-220 0.80 1.00 1.25 1.40 1.60 330 0.90 1.00 1.10 1.13 1.15

DIMENSIONS (mm)

Vent (except Ø5 & Ø6.3) D 5 6.3 8 10 13 16 18 22 25 F 2.0 2.5 3.5 5.0 7.5 10 12 d 0.5 0.6 0.8 0.8 α 1.5 2.0 L + α(max), 30 ALUMINUM ELECTROLYTIC CAPACITORS

RB CASE SIZE & MAX RIPPLE CURRENT

WV 6.3 / 0J 10 / 1A 16 / 1C 25 / 1E 35 / 1V 50 / 1H 63 / 1J Case Ripple Case Ripple Case Ripple Case Ripple Case Ripple Case Ripple Case Ripple µF Size Current Size Current Size Current Size Current Size Current Size Current Size Current(mm) (mA) (mm) (mA) (mm) (mA) (mm) (mA) (mm) (mA) (mm) (mA) (mm) (mA) 0.47 5x11 7 5x11 8 1.0 5x11 12 5x11 13 2.2 5x11 18 5x11 20 3.3 5x11 25 5x11 27 4.7 5x11 20 5x11 25 5x11 30 5x11 34 6.8 5x11 25 5x11 30 5x11 32 5x11 37 10 5x11 25 5x11 30 5x11 40 5x11 50 5x11 55 15 5x11 40 5x11 45 5x11 50 5x11 60 5x11 65 22 5x11 45 5x11 55 5x11 60 5x11 65 5x11 75 6.3x11 90 5x11 6.3x11 110 33 5x11 60 5x11 70 75 5x11 85 6.3x11 105 6.3x11 8x11 120 5x11 95 6.3x11 100 47 5x11 60 5x11 75 5x11 85 5x11 90 8x11 155 6.3x11 115 8x11 125 56 5x11 68 5x11 75 5x11 80 5x11 100 6.3x11 125 8x11 130 8x11 159 10x12 198 6.3x11 5x11 110 6.3x11 145 6.3x11 150 160 8x14 230 100 5x11 100 5x11 110 8x11 6.3x11 135 8x11 180 8x11 190 210 10x12 260 10x12 120 6.3x11 150 5x11 120 6.3x11 130 8x11 180 8x11 200 10x12 240 10x12 289 10x15 330 4x11 6.3x11 180 8x11 200 8x14 280 10x15 400 220 140 6.3x11 180 10x15 400 6.3x11 8x11 235 10x12 250 10x12 315 10x20 450 8x11 6.3x11 160 6.3x11 320 10x12 380 10x15 450 330 255 8x11 285 8x15 13x21 650 8x11 200 8x11 355 10x15 440 10x20 535 10x12 8x11 8x14 10x15 6.3x11 220 6.3x11 240 310 400 490 10x20 13x21 700 8x12 10x12 10x15 470 730 10x15 8x11 280 8x11 305 10x12 395 470 13x21 580 13x21 13x25 800 10x20 560 10x12 8x11 13x25 840 680 10x12 320 420 10x15 530 10x20 650 13x21 730 13x25 860 10x12 16x26 1000 8x11 8x14 10x12 13x16 13x16 370 490 590 680 850 13x25 930 16x26 1020 1000 8x12 10x12 10x15 13x20 13x21 10x12 470 10x15 570 10x20 700 13x21 855 13x25 995 16x26 1110 16x32 1200 10x20 680 16x32 1300 1500 10x15 600 10x20 750 13x25 1020 16x26 1110 16x32 1350 13x21 860 16x36 1450 10x20 740 10x20 800 13x21 990 13x25 1030 13x21 1230 16x36 1360 2200 16x15 16x26 16x32 13x21 930 13x21 1010 13x25 1150 1230 1450 1530 16x26 13x21 18x36 10x20 880 13x21 1050 13x25 1140 16x26 1230 16x36 1470 3300 18x42 1700 13x21 1100 13x25 1220 16x26 1350 16x32 1450 18x36 1660 3900 10x25 16x26 13x25 1100 13x25 1190 16x26 1330 16x32 18x36 1580 4700 16x36 1420 22x35 1900 18x32 1570 16x26 1320 16x26 1410 16x32 1560 18x42 1750 18x36 1690 13x25 1300 16x26 1370 16x36 1590 6800 18x36 1850 16x26 1350 16x32 1600 18x36 1790 16x26 1560 16x36 1760 10000 18x36 2100 16x32 1830 18x36 1980 15000 18x36 2280, ALUMINUM ELECTROLYTIC CAPACITORS 31

RB WV 100 / 2A 160 / 2C 200 / 2D 250 / 2E 350 / 2V 400 / 2G 450 / 2W

µF Case Ripple Case Ripple Case Ripple Case Ripple Case Ripple Case Ripple Case Ripple Size Current Size Current Size Current Size Current Size Current Size Current Size Current (mm) (mA) (mm) (mA) (mm) (mA) (mm) (mA) (mm) (mA) (mm) (mA) (mm) (mA) 0.47 5x11 10 5x11 12 5x11 14 5x11 14 5x11 14 6.3x11 14 6.3x11 14 6.3x11 16 1.0 5x11 15 5x11 17 5x11 19 6.3x11 19 6.3x11 20 8 x11 20 8x11 20 6.3x11 22 6.3x11 23 8x11 28 2.2 5x11 22 6.3x11 25 8x11 35 10x12 35 8x11 28 8x11 29 10x12 35 6.3x11 30 6.3x11 32 8x11 33 8x11 37 8x11 38 3.3 5x11 29 10x15 54 8x11 36 8x11 40 10x12 42 10x12 47 10x12 50 6.3x11 34 8x11 40 8x11 41 10x12 47 10x12 49 4.7 5x11 37 10x15 60 8x11 43 10x12 50 10x12 52 10x15 55 10x15 57 8x15 62 6.8 5x11 46 10x12 54 10x12 60 10x15 65 10x20 72 10x20 80 10x12 60 5x11 55 8x11 56 10x12 69 10x20 77 13x21 85 10 10x15 88 10x15 95 6.3x11 65 10x12 70 10x15 80 13x21 97 13x25 100 10x20 100 15 8x11 82 10x1S 90 10x15 110 10x15 120 10x20 140 16x26 160 13x25 150 6.3x11 13x21 150 16x26 150 22 115 10x15 130 10x15 140 10x20 155 13x21 165 8x11 13x25 175 16x32 180 8x11 120 13x21 170 13x25 190 16x26 190 33 10x20 180 10x20 190 13x25 220 10x12 160 13x25 200 16x26 230 16x36 240 10x12 180 13x21 240 13x21 16x26 280 16x36 300 47 13x21 270 330 16x26 340 10x15 210 13x25 290 13x25 16x36 350 18x42 360 16x32 68 10x15 241 13x25 300 13x25 330 16x26 350 16x32 370 380 22x42 400 18x36 10x16 250 13x25 330 100 16x26 410 16x32 430 18x36 460 18x36 480 10x20 385 16x26 400 150 13x25 414 16x32 435 16x36 450 18x42 460 22x42 480 16x32 550 18x36 580 220 13x25 590 22x42 680 16x36 620 18x42 650 13x25 600 18x36 770 18x42 780 16x26 720 18x42 850 22x42 920 16x26 740 470 22x42 980 16x23 875 680 16x36 1200 18x42 1340 22x42 1500,

LL LLSeries ALUMINUM ELECTROLYTIC CAPACITORS FEATURES

105°C Standard size: For low leakage current Load life: 105°C 1000 hours

SPECIFICATION

Item Characteristic Operation Temperature Range -40 ~ +105°C Rated Working Voltage 6.3 ~ 50 V.DC Capacitance Tolerance (120Hz 20°C) ±20% (M) Leakage Current I ≤ 0.002CV or 0.4 (μA) After I : Leakage Current(μA) (Max) at 20°C 2 minutes C : Rated Capacitance(μF) V : Rated Voltage(V) Surge Voltage WV 6.3 10 16 25 35 50 (120Hz 20°C) SV 8 13 20 32 44 63 Dissipation Factor Rated Voltage (V) 6.3 10 16 25 35 50 (120Hz 20°C) (tanδ) tanδ 0.24 0.19 0.16 0.14 0.12 0.10 Impedance ratio at 120Hz Rated Vdtage(V) 6.3 10 16 25 35 50 Low Temperature Stability Z-25°C /Z+20°C432222Z-40°C /Z+20°C864433Test conditions- Duration time : l000Hrs, Ambient temperature : +105°C Applied voltage : Rated DC working voltage Endurance capacitance change Within ±20% of the initial value. (Load Life) Dissipation Factor Not more than 200% of the specified value. Leakage Current Not more than the specified value. The following specification shall be satisfied when the capacitors are stored to 20°C after exposing them Shelf Life for 1000 hours at 105°C without voltage applied. The capacitors meet the specified value for load life characteristics listed above.

RIPPLE CURRENT FOR FREQUENCY MULTIPLIERS

Frequency (Hz) CAP(μF) 60(50) 120 500 1K 10K≤ 0.1 ~ 47μF 0.80 1.00 1.20 1.30 1.50 100 ~ 1000μF 0.80 1.00 1.10 1.15 1.20

DIMENSIONS (mm)

D 5 6.3 8 10 F 2.0 2.5 3.5 5.0 d 0.5 0.5 0.5 0.6 L + α(max) α 1.0(L≤20), ALUMINUM ELECTROLYTIC CAPACITORS 33

LL CASE SIZE & MAX RIPPLE CURRENT

6.3V / 0J 10V / 13 16V / 20 25V / 32 35V / 44 50V / 63 µF Size R.C. Size R.C. Size R.C. Size R.C. Size R.C. Size R.C. 0.1 5x11 1 0.22 5x11 2 0.33 5x11 3 0.47 5x11515x11 10 2.2 5x11 20 3.3 5x11 30 4.7 5x11 25 5x11 30 5x11 35 10 5x11 30 5x11 45 5x11 50 5x11 55 22 5x11 40 5x11 45 5x11 60 5x11 80 5x11 85 6.3x11 90 33 5x11 50 5x11 65 5x11 80 5x11 90 6.3x11 110 6.3x11 120 47 5x11 70 5x11 80 5x11 90 6.3x11 120 6.3x11 130 8x12 170 100 5x11 90 6.3x11 130 6.3x11 160 8x12 200 8x12 230 10x12 280 220 6.3x11 200 8x12 270 8x12 280 10x12 350 10x16 400 10x20 460 330 8x12 300 8x12 350 10x12 380 10x16 460 10x20 520 470 8x12 360 10x12 450 10x16 500 10x20 590 680 10x16 470 10x20 570 1000 10x16 640 10x20 730,

LG LGSeries ALUMINUM ELECTROLYTIC CAPACITORS FEATURES

85°C Standard size: For low leakage current Load life: 85°C 1000 hours

SPECIFICATION

Item Characteristic Operation Temperature Range -40 to + 85°C Rated Working Voltage 6.3 - 100 V.DC Capacitance Tolerance (120Hz 20°C) ±20% (M) Leakage Current I ≤ 0.002CV or 0.4 (μA) After I : Leakage Current(μA) (120Hz 20°C) 2 minutes C : Rated Capacitance(μF) V : Rated Voltage(V) Surge Voltage WV 6.3 10 16 25 35 50 63 100 (120Hz 20°C) SV 8 13 20 32 44 63 79 125 Dissipation Factor WV 6.3 10 16 25 35 50 63 100 (120Hz 20°C) (tanδ) tanδ 0.22 0.19 0.16 0.14 0.12 0.10 0.09 0.08 Impedance ratio at 120Hz Rated Voltage (V) 6.3 10 16 25 35 50 63 100 Low Temperature Stability -25°C / +25°C43222222-40°C / +25°C86443333After 1000 hours application of WV at +85°C the capacitor shall meet the following limits. Capacitance Change ≤ ±20% of initial value Load Life Dissipation Factor ≤ 200% of initial specified value Leakage Current ≤ initial specified value The following specification shall be satisfied when the capacitors are stored to 20°C after exposing them for Shelf Life 1000 hours at 85°C without voltage applied. The capacitors meet the specified value for load life characteristics listed above.

RIPPLE CURRENT FOR FREQUENCY MULTIPLIERS

Frequency (Hz) CAP(μF) 60(50) 120 500 1K 10K≤ 0.1 ~ 47μF 0.80 1.00 1.20 1.30 1.50 100 ~ 1000μF 0.80 1.00 1.10 1.15 1.20

DIMENSIONS (mm)

Vent (except Ø5 & Ø6.3) D 5 6.3 8 10 13 16 18 F 2.0 2.5 3.5 5.0 7.5 d 0.5 0.6 0.8 α 1.0 2.0 L + α(max), ALUMINUM ELECTROLYTIC CAPACITORS 35

LG CASE SIZE & MAX RIPPLE CURRENT WV 6.3 / 0J 10 / 1A 16 / 1C 25 / 1E 35 / 1V 50 / 1H 63 / 1J 100 / 2A

µF ITEM Size R.C. Size R.C. Size R.C. Size R.C. Size R.C. Size R.C. Size R.C. Size R.C. 01 5x11 1 5x11 2 0.22 5x11 2 5x11 4 0.33 5x11 3 5x11 7 0.47 5x11 5 5x11 10 1 5x11 10 5x11 18 2.2 5x11 20 5x11 25 3.3 5x11 35 5x11 45 4.7 5x11 30 5x11 35 5x11 40 5x11 50 10 5x11 40 5x11 50 5x11 55 5x11 60 6.3x11 75 8x12 90 22 5x11 45 5x11 50 5x11 70 5x11 85 5x11 90 6.3x11 100 8x12 110 10x12 130 33 5x11 55 5x11 70 5x11 90 5x11 100 6.3x11 120 6.3x11 130 8x12 160 10x16 180 47 5x11 75 5x11 90 5x11 110 6.3x11 130 6.3x11 140 8x12 180 10x12 200 10x20 220 100 5x11 100 6.3x11 140 6.3x11 180 8x12 210 8x12 240 10x12 290 10x20 330 13x21 370 220 6.3x11 220 8x12 280 8x12 300 10x12 360 10x16 410 10x20 480 13x21 540 16x26 580 330 8x12 310 8x12 360 10x12 400 10x16 470 10x20 530 13x21 600 13x26 700 16x32 730 470 8x12 380 10x12 460 10x16 520 10x20 600 13x21 670 16x26 750 16x26 840 18x36 910 680 10x16 480 10x20 590 13x21 720 13x26 800 16x26 830 16x26 900 16x32 1050 1000 10x16 650 10x20 750 13x21 900 13x26 1000 16x26 1100 16x32 1140 18x36 1320,

NP NPSeries ALUMINUM ELECTROLYTIC CAPACITORS FEATURES

General Used Standard Size

SPECIFICATION

Item Characteristic Operation Temperature Range -40 to +105°C Rated Working Voltage 6.3 ~ 100 V.DC Capacitance Tolerance (120Hz 20°C) ±20% (M) Leakage Current I ≤ 0.03CV or3 (µA) max I : Leakage Current( µA) (120Hz 20°C) C : Rated Capacitance( µF)After 3 minutes V : Rated Voltage(V) WV 6.3 10 16 25 35 50 63 100 Surge Voltage (120Hz 20°C) SV 8 13 20 32 44 63 79 125 Add 0.02 per 1000µF for more than 1000µF WV 6.3 10 16 25 35 50 63 100 Dissipation Factor (120Hz 20°C)(tanδ) tanδ 0.26 0.24 0.22 0.20 0.16 0.14 0.12 0.10 Impedance ratio at 120Hz Rated Voltage (V) 6.3 10 16 25 35 50 63 100 Low Temperature Stability -25°C / +25°C43222222-40°C / +25°C 108654433After 1000 hours application ofWVat +105°C the capacitor shall meet the following limits. The polarity needs to exchange every 250hours. Capacitance Change ≤ ±25% of initial value Load Life Dissipation Factor ≤ 200% of initial specified value Leakage Current ≤ initial specified value At 105°C no voltage applied after 1000 hours and then through the aging treatment (reference JIS C-5102) the capacitor shall meet the following limits. Capacitance Change ≤ ±25% of initial value Shelf Life Dissipation Factor ≤ 200% of initial specified value Leakage Current ≤ 200% of initial specified value, ALUMINUM ELECTROLYTIC CAPACITORS 37

NP DIMENSIONS (mm)

D 5 6.3 8 10 13 16 18 F 2.0 2.5 3.5 5.0 5.0 7.5 7.5 d 0.5 0.5 0.5 0.6 0.6 0.8 0.8 α 1.5 2.0 2.0 L + α(max)

CASE SIZE & MAX RIPPLE CURRENT

WV 6.3 / 0J 10 / 1A 16 / 1C 25 / 1E 35 / 1V 50 / 1H 63 / 1J 100 / 2A µF ITEM Size R.C. Size R.C. Size R.C. Size R.C. Size R.C. Size R.C. Size R.C. Size R.C. 0.1 ~ 0.47 5x11 11 5x11 14 1 5x11 17 5x11 21 2.2 5x11 25 6.3x11 34 3.3 5x11 27 5x11 28 6.3x11 39 4.7 5x11 34 5x11 34 5x11 34 6.3x11 34 6.3x11 47 10 5x11 42 5x11 42 511 43 6.3x11 52 6.3x11 57 8x11 71 22 5x11 57 5x11 57 6.3x11 65 6.3x11 73 8x11 89 8x11 95 10x16 135 33 5x11 64 5x11 64 5x11 70 6.3x11 80 8x11 100 8x11 105 10 x12 135 13x21 220 47 5x11 76 5x11 76 6.3x11 95 6.3x11 95 8x11 120 10x12 150 10x16 180 13x21 240 100 6.3x11 125 6.3x11 125 8x11 160 8x11 160 10x16 230 10x20 265 13x21 320 16x26 425 220 8x11 215 8x11 215 10x12 275 10x16 305 13x21 410 13x26 480 16x26 575 18x36 720 330 8x11 265 10x12 345 10x16 375 13x21 450 13x21 505 16x26 650 16 x31 655 470 10x12 370 10x16 410 10x20 485 13x21 540 13x25 655 16x32 835 18x36 965 1000 10x20 650 13x21 720 13x25 855 16x32 950 16x32 1140 2200 13x25 1160 16x26 1280 16x32 1510 18x36 1620 3300 16x26 1570 16x32 1690 18x36 1980 4700 16x32 2020 18x36 2160 6800 18x36 2600,

NG NGSeries ALUMINUM ELECTROLYTIC CAPACITORS FEATURES

Non-Polarized 85ºC

SPECIFICATION

Item Characteristic Operation Temperature Range -40° ~ +85°C -25º ~ +85ºC Rated Working Voltage 10 ~ 100V.DC 160 ~ 250V.DC Capacitance Tolerance (120Hz 20°C) ±20% (M) Leakage Current I ≤ 0.03CV or 3 (µA) After 1 minute I : Leakage Current(μA) (120Hz 20°C) whichever s greater measured with rated working C : Rated Capacitance(μF)votage applied. V : Rated Voltage(V) Surge Voltage WV 10 16 25 35 50 63 100 160 200 250 (120Hz 20°C) SV 13 20 32 44 63 79 125 200 250 300 Rated Voltage (V) 10 16 25 35 50 63 100 160 200 250 Dissipation Factor (120Hz 20°C) tanδ 25 20 15 15 13 10 10 15 15 20 Impedance ratio max. Rated Voltage (V) 10 16 25 35 50 63 100 160 200 250 Low Temperature Stability -25°C / +25°C3222222223-40°C / +20°C6433333Test conditions Duration time : l000Hrs Ambient temperature : +85°C Applied voltage : Rated DC working voltage Endurance (Load Life) After test requirements at +20°C Capacitance change : ≤±20% of the initial measured value Dissipation factor : ≤150% of the initial specified value Leakage current : ≤The initial specified value

DIMENSIONS (mm)

Vent (except Ø5 & Ø6.3) D 5 6.3 8 10 13 16 F 2.0 2.5 3.5 5.0 5.0 7.5 d 0.5 0.5 0.5 0.6 0.6 0.8αL+ α(max)1.5 1.5 1.5 2.0 2.0 2.0

MULTIPLIER FOR RIPPLE CURRENT

Frequency(Hz) 50(60) 120 400 1k 10k 100k≤ 5.6 ~ 33µF 0.811.30 1.45 1.65 1.70 Mutiplier 39 ~ 270µF 0.8 1 1.23 1.36 1.48 1.53 330 ~ 680µF 0.8 1 1.16 1.25 1.35 1.38, ALUMINUM ELECTROLYTIC CAPACITORS 39

NG CASE SIZE & MAX RIPPLE CURRENT

WV 10 / 1A 16 / 1C 25 / 1E 35 / 1V 50 / 1H µF ITEM Size R.C. Size R.C. Size R.C. Size R.C. Size R.C. 0.47 5x11 11 1 5x11 17 2.2 5x11 25 3.3 5x11 27 4.1 5x11 34 10 5x11 34 5x11 43 6.3x11 52 22 5x11 57 6.3x11 65 6.3x11 73 8x11 89 33 5X11 64 6.3x11 70 6.3x11 80 8x11 100 10x12 105 47 5X11 76 6.3x11 95 6.3x11 95 8x11 120 10x12 150 100 6.3X11 125 8x11 160 8x11 160 10x12 230 10x20 265 220 8x11 215 10x12 275 10x12 305 10x20 410 13x25 480 330 10x12 345 10x12 375 10x16 450 13x20 505 16x25 650 470 10x12 410 10x16 485 13x20 540 13x25 655 1000 10x20 720 13x20 855 WV 63 / 1J 100 / 2A 160 / 2C 200 / 2D 250 / 2E µF ITEM Size R.C. Size R.C. Size R.C. Size R.C. Size R.C. 0.47 5x11 12 5x11 14 5x11 17 6.3x11 21 6.3x11 28 1 5x11 18 5x11 21 6.3x11 25 8x11 28 8x11 34 2.2 5x11 26 5x11 34 8x11 38 8x11 42 10x12 50 3.3 6.3x11 28 6.3x11 39 8x11 43 10x12 47 10x16 57 4.7 6.3x11 34 8x11 47 10x12 52 10x16 56 10x20 89 10 6.3x11 57 8x11 71 10x16 89 10x20 95 10x20 135 22 8x11 95 10xl6 135 10x20 150 13x20 180 13x25 220 33 10x12 135 10x20 220 13x20 230 13x25 265 16x25 320 47 10x16 180 13x20 240 13x25 265 100 13x20 320 16x25 425 220 13x25 575 All blank voltage on sleeve marking is the same voltage as “→”,

BP BP Series ALUMINUM ELECTROLYTIC CAPACITORS FEATURES

Bi-Polarized For Horizontal Deflection

SPECIFICATION

Item Characteristic Operation Temperature Range -40 to +85°C Rated Working Voltage 25 – 50 V.DC Capacitance Tolerance (120Hz 20°C) ±20% (M) ±10% (K) Leakage Current (120Hz 20°C) 100 (mA) After 5 minutes in both directions. Surge Voltage WV 25 35 50 (120Hz 20°C) SV 32 44 63 Dissipation Factor (120Hz 20°C)(tanδ) tanδ ≤ 0.05 After 2000 hours application WV at +85°C, the capacitor shall meet the following limits. (The polarity needs to exchange every 250 hours) Capacitance Change ≤ ±25% of initial value Load Life Dissipation Factor ≤ 200% of initial specified value Leakage Current ≤ initial specified value

DIMENSIONS (mm)

Vent D 10 13 16 18 22 F 5.0 7.5 10 d 0.6 0.8 0.8 L + 2(max)

CASE SIZE & MAX RIPPLE CURRENT

WV 25 / 1E 35 / 1V 50 / 1H µF ITEM D×L E.S.R. R.C. D×L E.S.R. R.C. D×L E.S.R. R.C. 2.2 10x20 30.14 2.8 13x26 30.14 3.5 13x26 30.14 3.5 3.3 13x26 20.10 4.5 13x26 20.10 4.8 16x26 20.10 4.8 4.7 13x26 14.11 5.5 13x26 14.11 6.5 16x32 14.11 6.5 6.8 16x26 9.75 7.5 16x26 9.75 8.0 16x36 9.75 8.0 8.2 16x32 8.09 8.5 16x32 8.09 9.5 18x36 8.09 9.5 10 18x32 6.63 10.0 18x32 6.63 10.5 18x36 6.63 10.5 12 18x32 5.53 11.5 18x32 5.53 12.0 22x41 5.53 12.0 18 18x32 3.68 13.0 18x32 3.68 13.0 22 18x32 2.83 14.5 18x32 2.83 14.5,

RT 41RTSeries ALUMINUM ELECTROLYTIC CAPACITORS FEATURES

Axial Type For 85°C

SPECIFICATION

Item Characteristic Operation Temperature Range -40 to + 85°C -25 to +85°C Rated Working Voltage 6.3 - 100 V.DC 160 - 450 V.DC Capacitance Tolerance (120Hz 20°C) ±20% (M) Leakage Current I ≤ 0.03CV or 3µA Whichever is greater, I : Leakage Current(µA) (120Hz 20°C) after 3 minutes C : Rated Capacitance(µF)I ≤ 0.01CV + 10, after 3 minutes V : Rated Voltage(V) Surge Voltage WV 6.3 10 16 25 35 50 63 100 160 200 250 350 400 450 (120Hz 20°C) SV 8 13 20 32 44 63 79 125 200 250 300 400 450 500 Add 0.02 per 1000μF for more than 1000μF Dissipation Factor WV 6.3 10 16 25 35 50 63 100 160 200 250 350 400 450 (120Hz 20°C)(tanδ) Tanδ 0.24 0.20 0.16 0.14 0.12 0.10 0.10 0.10 0.20 0.20 0.20 0.24 0.24 0.24 Impedance ratio at 120Hz Rated Voltage 6.3 10 16-35 50-100 160-350 400-450 Low Temperature Stability -25°C / +25°C432234-40°C / +25°C8643After 1000 hours application of WV at+85°C the capacitor shall meet the following limits Capacitance Change ≤ ±25% of initial value Load Life Dissipation Factor ≤ 200% of initial specified value Leakage Current ≤ initial specified value After 500 hours application of WV at+85°C the capacitor shall meet the following limits Capacitance Change ≤ ±25% of initial value Shelf Life Dissipation Factor ≤ 200% of initial specified value Leakage Current ≤ initial specified value

DIMENSIONS (mm)

D 6.3 8 10 13 16 18 22 25 d 0.5 0.5 0.6 0.6 0.8 0.8 0.8 0.8 α 1.5 1.5 2.0 2.0 2.0 2.0 2.0 2.0 30 min L + α(max) 30 min, 42 ALUMINUM ELECTROLYTIC CAPACITORS

RT CASE SIZE & MAX RIPPLE CURRENT

WV 6.3 / 0J 10 / 1A 16 / 1C 25 / 1E 35 / 1V 50 / 1H 63 / 1J µF ITEM D×L R.C D×L R.C. D×L R.C. D×L R.C. D×L R.C. D×L R.C. D×L R.C. 0.47 5x12 5 1.0 5x12 10 2.2 5x12 23 3.3 5x12 28 5x12 31 4.7 5x12 34 5x12 37 10 5x13 37 5x12 40 5x12 45 5x12 50 5x12 55 22 5x12 60 5x12 65 5x12 70 6.3x12 85 6.3x12 90 33 5x12 65 5x12 70 5x12 80 6.3x12 90 6.3x16 110 6.3x16 120 47 5x12 80 5x12 85 6.3x12 100 6.3x16 120 6.3x16 130 8x16 160 100 5x12 110 6.3x12 130 6.3x16 160 6.3x16 170 8x16 210 8x16 220 8x20 260 220 6.3x16 220 6.3x16 210 8x13 257 8x16 280 8x20 340 10x21 410 10x26 480 330 6.3x16 250 8x16 300 8x16 320 8x20 380 10x21 460 10x26 560 13x26 650 470 8x15 330 8x16 350 10x17 430 10x21 510 10x26 610 13x36 730 13x32 840 1000 10x21 600 10x21 640 10x26 770 13x26 900 13x32 1060 16x32 1260 16x32 1330 2200 13x26 1020 13x26 1090 16x28 1180 16x32 1480 16x32 1580 18x41 1920 22x40 2160 3300 13x26 1200 13x32 1390 16x32 1620 16x41 1710 16x41 2050 22x40 2340 22x52 2470 4700 16x32 1500 16x32 1730 16x41 1840 18x41 2170 22x40 2470 22x52 2650 25x61 2710 WV 100 / 2A 160 / 2C 200 / 2D 250 / 2E 350 / 2V 400 / 2G 450 / 2W µF ITEM D×L R.C. D×L R.C. D×L R.C. D×L R.C. D×L R.C. D×L R.C. D×L R.C. 0.47 5x12 10 1.0 5x12 18 6.3x12 13 6.3x12 13 6.3x16 14 6.3x16 12 8x16 14 8x16 14 2.2 5x12 28 6.3x16 23 6.3x16 23 8x16 27 8x16 24 8x20 28 10x21 31 3.3 5x12 34 8x16 33 8x16 33 8x16 33 8x20 32 10x21 38 10x21 38 4.7 5x12 40 8x16 39 8x16 39 8x20 45 10x21 46 10x21 46 10x26 50 10 6.3x12 60 8x20 60 10x21 70 10x21 70 13x26 85 13x26 85 13x26 85 22 8x16 120 10x26 120 13x26 140 13x26 140 13x32 140 16x32 150 16x32 150 33 8x16 150 13x26 170 13x26 170 13x32 190 16x32 190 16x41 210 18x41 230 47 8x20 190 16x32 230 13x32 230 16x32 260 16x41 260 18x41 290 22x40 310 100 10x26 340 16x41 430 16x41 430 16x41 430 22x40 420 22x52 460 22x52 540 220 13x26 560 22x40 680 22x40 680 22x40 680 330 13x32 750 22x52 940 25x52 1010 470 16x32 970 25x52 1200 1000 22x40 1540 2200 25x61 2430,

TH 43THSeries ALUMINUM ELECTROLYTIC CAPACITORS FEATURES

High Temperature For 125°C

SPECIFICATION

Item Characteristic Operation Temperature Range -25 to +125°C Rated Working Voltage 10 - 63 V.DC Capacitance Tolerance (120Hz 20°C) ±20% (M) Leakage Current I ≤ 0.002CV or 0.4 (μA) After I : Leakage Current(μA) (120Hz 20°C) 5 minutes C : Rated Capacitance(μF) V : Rated Voltage(V) WV 10 16 25 35 50 63 Surge Voltage (120Hz 20°C) SV 13 20 32 44 63 79 WV 10 16 25 35 50 63 Dissipation Factor (120Hz 20°C) (tanδ) tanδ 0.35 0.22 0.20 0.17 0.15 0.12 Impedance ratio at 120Hz Rated Voltage (V) 10 16 25 35 ~ 63 Low Temperature Stability -25°C / +25°C8643After 1000 hours application of WV at +125°C the capacitor shall meet the following limits. Capacitance Change ≤ ±25% of initial value Endurance (Load Life) Dissipation Factor ≤ 200% of initial specified value Leakage Current ≤ initial specified value

DIMENSIONS (mm)

VentD810 13 F 3.5 5.0 5.0 d 0.5 0.6 0.6 L + α(max) α 2.0, 44 ALUMINUM ELECTROLYTIC CAPACITORS

TH CASE SIZE & MAX RIPPLE CURRENT Size øDXL(mm), Ripple Current (mA r.m.s./125˚C, 120Hz)

Rate Voltage 10(1A) 16(1C) 25(1E) µF DXL R.C. DXL R.C. DXL R.C. 33 → 8X12 110 47 → 8X12 117 8X12 117 100 8X12 123 10X12 158 10X16 203 220 10X16 214 10X20 275 10X20 279 330 10X16 224 13X20 360 13X25 425 470 10X20 292 13X25 462 1000 13X20 474 Rate Voltage 35(1V) 50(1H) 63(1J) µF DXL R.C. DXL R.C. DXL R.C. 0.47 → 8X1251→ 8X12 10 2.2 → 8X12 23 3.3 → 8X12 35 8X12 44 4.7 → 8X12 50 8X12 66 10 → 10X12 121 10X12 121 22 8X12 101 8X12 87 8X12 87 33 10X12 138 10X12 138 10X16 169 47 10X12 149 10X16 188 10X20 218 100 10X20 268 13X20 311 13X25 379 All blank voltage on sleeve marking is the same voltage as “→”,

RE 45RESeries ALUMINUM ELECTROLYTIC CAPACITORS FEATURES

Low Impedance

SPECIFICATION

Item Characteristic Operation Temperature Range -40 to + 105°C Rated Working Voltage 6.3 - 50 V.DC Capacitance Tolerance (120Hz 20°C) ±20% (M) Leakage Current I : Leakage Current(μA) (120Hz 20°C) I ≤ 0.01CV After 2 minutes C : Rated Capacitance(μF) V : Rated Voltage(V) Surge Voltage WV 6.3 10 16 25 35 50 (120Hz 20°C) SV 8 13 20 32 44 63 Dissipation Factor WV 6.3 10 16 25 35 50 (120Hz 20°C) (tanδ) tanδ 0.22 0.19 0.16 0.14 0.12 0.10 After life test at conditions stated in the table below, the capacitors shall meet the following requirement. Capacitance Change ≤ ±25% of initial value Case Dia Life Time (hrs) Load Life Dissipation Factor ≤ 200% of initial specified valueØD≤ 8 2000 Leakage Current ≤ initial specified valueØD≤ 10 3000 At 105°C no voltage applied after (ØD5mm~ØD6mm 500Hrs, ≤ ØD8mm 1000Hrs) the capacitor shall meet the following limits. Capacitance Change ≤ 25% of initial value Shelf Life tanδ ≤ 200% of initial specified value Leakage Current ≤ 200% of initial specified value

RIPPLE CURRENT FOR FREQUENCY MULTIPLIERS

Frequency (Hz) 120 1K 10K 100K Coefficient 0.4 0.7 0.85 1.0

DIMENSIONS (mm)

Vent (except Ø5 & Ø6.3) D 5 6.3 8 10 13 16 18 F 2.0 2.5 3.5 5.0 5.0 7.5 7.5 d 0.5 0.5 0.5 0.6 0.6 0.8 0.8 L + α(max) α 1.5 2.0, 46 ALUMINUM ELECTROLYTIC CAPACITORS

RE CASE SIZE & MAX RIPPLE CURRENT Size øDXL(mm), Ripple Current (mA r.m.s./105˚C, 100kHz)

6.3 / 0J 10 / 1A 16 / 1C µF Case Size (mm) Ripple Current Ripple Current (mA) Impedance (Ω) Case Size (mm) (mA) Impedance (Ω) Case Size (mm) Ripple Current (mA) Impedance (Ω) 47 5x11 180 0.750 5x11 180 0.750 100 5x11 180 0.750 6.3x11 277 0.400 6.3x11 277 0.400 220 6.3x11 277 0.400 8x11 479 0.170 270 6.3x11 277 0.400 8x11 479 0.170 8x12 539 0.140 6.3x7 8x11 479 0.170 330 230 0.480 8x11 479 0.170 6.3x11 8x14 634 0.110 6.3x11 277 0.400 8x11 479 0.170 8x11 479 0.170 470 8x7 380 0.220 8x12 539 0.140 8x11 479 0.170 8x14 634 634 10x12 713 0.100 680 8x14 634 0.110 10x12 713 0.100 10x12 713 0.100 8x11 479 0.170 10x12 713 0.100 8x20 980 0.050 1000 8x12 539 0.140 8x14 634 0.110 10x15 927 0.070 10x15 927 0.070 10x12 713 0.100 1200 10x20 1189 0.050 13x21 1585 0.038 10x15 927 0.070 8x14 927 0.070 1500 8x20 980 0.050 10x20 1189 0.050 10x20 1189 0.050 10x15 927 0.070 10x25 1456 0.040 10x20 1189 0.050 2200 10x25 1456 0.040 13x21 1585 0.038 13x25 1917 0.030 13x36 2423 0.026 3300 13x21 1585 0.038 13x25 1917 0.030 16x16 1940 0.042 4700 13x30 2149 0.028 13x36 2423 0.026 16x36 2742 0.025 6800 16x26 2239 0.028 16x36 2742 0.025 10000 16x36 2742 0.025 25 / 1E 35 / 1V 50 / 1H 63 / 1J 100 / 2A µF Case Ripple Impedance Case Ripple Impedance Case Ripple Impedance Case Ripple Impedance Size Current Size Current Size Current Size Current Case Size Ripple Impedance Current (mm) (mA) (Ω) (mm) (mA) (Ω) (mm) (mA) (Ω) (mm) (mA) (Ω) (mm) (mA) (Ω) 4.7 5x11 180 0.750 5x11 78 2.000 10 5x11 180 0.750 5x11 95 1.700 6.3x11 175 0.082 22 5x11 180 0.750 5x11 140 0.700 8x11 261 0.520 33 5x11 180 0.750 5x11 150 0.650 47 5x11 180 0.750 6.3x11 277 0.400 6.3x11 180 0.520 8x11 10x12 100 6.3x11 277 0.400 8x11 479 0.170 8x14 430 0.270 10x12 8x11 479 0.170 220 8x14 713 0.100 10x12 713 0.100 10x15 550 0.200 10x12 634 0.110 8x14 634 0.110 330 10x11 684 0.130 10x20 1189 0.050 10x25 820 0.072 10x15 927 0.070 8x14 634 0.110 10x15 927 0.070 10x12 713 0.100 470 13x21 950 0.065 10x15 927 0.070 10x25 1456 0.040 10x20 1189 0.050 560 10x15 10x16 927 0.070 13x16 1030 0.065 1000 13x16 1030 0.065 16x26 1650 0.039 13x21 1585 0.038 13x25 1917 0.030 1200 13x25 1917 0.030 13x30 2149 0.028 16x32 2150 0.025 1500 13x30 2149 0.028 16x26 2239 0.028 16x36 2250 0.025 13x25 1917 0.030 2200 16x32 2547 0.026 16X16 1940 0.042 3300 16x36 2742 0.025 18x36 2742 0.024,

LZ 47LZSeries ALUMINUM ELECTROLYTIC CAPACITORS FEATURES

High Ripple Current

SPECIFICATION

Item Characteristic Operation Temperature Range -40 to + 105°C Rated Working Voltage 6.3 - 100 V.DC Capacitance Tolerance (120Hz 20°C) ±20% (120Hz) I : Leakage Current(μA) Leakage Current (120Hz 20°C) I ≤ 0.01CV After 2 minutes C : Rated Capacitance(μF) V : Rated Voltage(V) WV 6.3 10 16 25 35 50 63 100 Dissipation Factor (120Hz 20°C) (tanδ) tanδ 0.22 0.19 0.16 0.14 0.12 0.10 0.09 0.08 After 1000 hours application of WV at +105°C the capacitors shall meet the following requirement. Other life test at conditions stated in the table below. Case Dia Life Time (hrs) Capacitance Change ≤ ±25% of initial value Load Life L ≥ 11 Ø D=6.8 2000 Dissipation Factor ≤ 200% of initial specified value L ≥ 16 Ø D=10 3000 Leakage Current ≤ initial specified value L ≥ 21 Ø D=13 4000

RIPPLE CURRENT FOR FREQUENCY MULTIPLIERS

Frequency (Hz) 60 120 1K 10K 100K CAP(μF) 6.8-33 0.45 0.55 0.75 0.90 1.00 39-330 0.60 0.70 0.85 0.95 1.00 390-1000 0.65 0.75 0.90 0.98 1.00 1200-18000 0.75 0.80 0.95 1.00 1.00

DIMENSIONS (mm) Vent(except Ø5 & Ø6.3)

D 5 6.3 8 10 13 16 18 d 0.5 0.5 0.6 0.8 F 2.0 2.5 3.5 5.0 7.5 L + α(max) α 1.5 2.0, 48 ALUMINUM ELECTROLYTIC CAPACITORS

LZ CASE SIZE & MAX RIPPLE CURRENT Size øDXL(mm), Ripple Current (mA r.m.s./105˚C, 100kHz)

Rated voltage 6.3V / 0J Cap (µF) Case Size (mm) Ripple Current (mA) Impedance 20°C 100kHz (Ω Max.) 150 5x11 210 0.580 330 6.3x11 340 0.220 470 6.3x11 350 0.240 680 8x11 640 0.130 820 10x12 865 0.080 1000 8x12 / 8x12 840 0.087 8x20 1050 0.069 10x16 1210 0.060 1500 10x20 1400 0.046 1800 13x16 1450 0.049 2200 10x25 1650 0.042 10x25 1910 0.031 16x16 1940 0.042 3300 13x21 1900 0.035 3900 13x25 2230 0.027 4700 13x30 2650 0.024 5600 13x35 2880 0.020 13x40 3350 0.017 16x26 2930 0.021 8200 16x32 3450 0.017 10000 16x36 3610 0.015 Rated voltage 10V / 1A Cap (µF) Case Size (mm) Ripple Current (mA) Impedance 20°C 100kHz (Ω Max.) 100 5x11 210 0.580 220 6.3x7 / 6.3x11 245 / 340 0.400 / 0.220 470 8x11 640 0.130 8x14 840 0.087 10x12 865 0.080 8x20 / 10x12 1050 0.069 10x16 1210 0.060 1200 10x20 1400 0.046 1500 10x25 1650 0.042 10x25 1910 0.031 13x21 1900 0.035 2700 18x16 2210 0.043 3300 13x25 2230 0.027 3900 13x30 2650 0.024 4700 13x35 2880 0.020 13x40 3350 0.017 16x26 2930 0.021 6800 16x32 3450 0.017 8200 16x36 3610 0.015 Rated voltage 16V / 1C Cap (µF) Case Size (mm) Ripple Current (mA) Impedance 20°C 100kHz (Ω Max.) 56 5x11 210 0.580 100 6.3x11 340 0.220 120 6.3x11 340 0.220 220 6.3x11 340 0.220 330 8x11 640 0.130 8x12 / 8x14 596 / 840 0.110 / 0.087 10x12 865 0.080 8x20 1050 0.069 10x16 1210 0.060 10x20 1400 0.046 13x16 1450 0.049 1200 10x25 1650 0.042 10x25 1910 0.031 1500 13x21 1900 0.035 16x16 1940 0.042 2200 13x25 2230 0.027 2700 13x30 2650 0.024 3300 13x35 2880 0.020 3900 13x41 3350 0.017 16x32 3450 0.017 18x25 3140 0.019 5600 16x36 3610 0.015 6800 16x42 4080 0.013 8200 18x36 4220 0.014, ALUMINUM ELECTROLYTIC CAPACITORS 49

LZ

Rated voltage 25V / 1E Cap (µF) Case Size (mm) Ripple Current (mA) Impedance 20°C 100kHz (Ω Max.) 47 5x11 210 0.580 100 6.3x11 340 0.220 220 8x11 640 0.130 8X14 840 0.087 10x16 865 0.080 8X20 1050 0.069 10x15 1210 0.060 10x20 1400 0.046 13X16 1450 0.049 820 10x25 1650 0.042 10x25 1910 0.031 13X21 1900 0.035 1200 18x16 2210 0.043 1500 10x25 / 13x25 1910 / 2230 0.031 / 0.027 1800 13x30 2650 0.024 2200 13x35 / 16x16 2880 0.020 2700 13x41 3350 0.017 3300 16x32 3450 0.017 3900 16x36 3610 0.015 16x42 4080 0.013 18X36 4220 0.014 5600 18x42 4280 0.012 Rated voltage 35V / 1V Cap (µF) Case Size (mm) Ripple Current (mA) Impedance 20°C 100kHz (Ω Max.) 33 5x11 210 0.580 56 6.3x11 340 0.220 150 8x11 640 0.130 8x14 840 0.087 10x12 865 0.080 270 8x20 1050 0.069 330 10x16 1210 0.060 10x20 1400 0.046 13x16 1450 0.049 560 10x25 1650 0.042 10x25 1910 0.031 13x21 1900 0.035 1000 13x16 / 13x25 2230 0.027 1200 13x30 2650 0.024 1500 13x35 2880 0.020 13x41 3350 0.017 16x26 2930 0.021 2200 16x32 3450 0.017 2700 16x36 3610 0.015 3300 16x42 4080 0.013 Rated voltage 50V / 1H Cap (µF) Case Size (mm) Ripple Current (mA) Impedance 20°C 100kHz (Ω Max.) 22 5x11 180 0.70 56 6.3x11 295 0.30 100 8x11 555 0.17 120 8x14 730 0.12 150 10x12 760 0.12 180 8x20 910 0.091 220 10x16 1050 0.084 10x20 1220 0.060 13x16 1260 0.061 330 10x25 1440 0.055 10x25 1690 0.043 470 13x21 1660 0.045 16x16 1690 0.055 560 13x25 1950 0.034 680 13x30 2310 0.030 820 13x35 2510 0.025 13x41 2920 0.021 16x26 2555 0.025 1200 16x32 3010 0.022 1500 16x36 3150 0.019 1800 16x42 3710 0.016, 50 ALUMINUM ELECTROLYTIC CAPACITORS

LZ

Rated voltage 63V / 1J Cap (µF) Case Size (mm) Ripple Current (mA) Impedance 20°C 100kHz (Ω Max.) 15 5x11 55 2.300 33 6.3x11 115 1.200 56 8x11 232 0.630 8x14 300 0.450 10x12 288 0.430 8x20 362 0.330 10x16 357 0.310 10x20 466 0.210 13x16 466 0.230 220 10x25 531 0.200 10x25 663 0.150 270 13x21 690 0.160 16x16 795 0.140 330 13x25 784 0.120 13x30 905 0.100 16x21 1040 0.091 560 13x35 1050 0.083 680 13x41 1180 0.071 820 16x32 1570 0.054 1000 16x36 1790 0.045 1200 16x42 2020 0.040 Rated voltage 100V / 2A Cap (µF) Case Size (mm) Ripple Current (mA) Impedance 20°C 100kHz (Ω Max.) 6.8 5x11 55 2.300 15 6.3x11 115 1.200 27 8x11 232 0.630 39 8x14 300 0.450 47 10x12 288 0.430 56 8x20 362 0.330 10x20 466 0.210 13x16 466 0.230 100 10x25 531 0.200 120 13x21 690 0.160 150 16x16 795 0.140 180 13x25 784 0.120 220 13x30 905 0.100 13x35 1050 0.083 16x26 1250 0.073 330 13x41 1180 0.071 390 16x32 1570 0.054 470 16x36 1790 0.045 560 16x42 2020 0.040,

LE 51LESeries ALUMINUM ELECTROLYTIC CAPACITORS FEATURES

Low ESR

SPECIFICATION

Item Characteristic Operation Temperature Range -40 to + 105°C Rated Working Voltage 6.3 - 100 V.DC Capacitance Tolerance (120Hz 20°C) ±20% (120Hz) Leakage Current (120Hz I : Leakage Current(μA) 20°C) I ≤ 0.01CV After 2 minutes C : Rated Capacitance(μF) V : Rated Voltage(V) WV 6.3 10 16 25 35 50 63 100 Surge Voltage (120Hz 20°C) SV 8 13 20 32 44 63 79 125 Dissipation Factor WV 6.3 10 16 25 35 50 63 100 (120Hz 20°C) (tanδ) tanδ 0.22 0.19 0.16 0.14 0.12 0.10 0.09 0.08 After life test at conditions stated in the table below, the capacitors shall meet the following requirement. Capacitance Change ≤ ±25% of initial value Case Dia Life Time (hrs) Load Life ≤ 200% of initial specified Ø D=8 1000 Dissipation Factor value Ø D=10 2000 Leakage Current ≤ initial specified value Ø D=13 3000 Shelf Life After leaving capacitors under no load of 105°C for 1000 hours and applying voltage, they meet the specified value for load life characteristics listed above.

RIPPLE CURRENT FOR FREQUENCY MULTIPLIERS

Frequency (Hz) 60(50) 120 1K 10K 100K CAP(μF) Multiplier 6.8-33 0.45 0.55 0.75 0.90 1.00 69-330 0.60 0.70 0.85 0.95 1.00 390-1000 0.65 0.75 0.90 0.98 1.00 1200-18000 0.75 0.80 0.95 1.00 1.00

DIMENSIONS (mm)

Vent (except Ø5 & Ø6.3) D 5 6.3 8 10 13 16 18 F 2.0 2.5 3.5 5.0 5.0 7.5 7.5 d 0.5 0.5 0.5 0.6 0.6 0.8 0.8 L + α(max) α 1.5 2.0, 52 ALUMINUM ELECTROLYTIC CAPACITORS

LE CASE SIZE & MAX RIPPLE CURRENT Size øDXL(mm), Ripple Current (mA r.m.s./105˚C, 100kHz)

Rated Voltage 6.3V / 0J Cap (μF) Case Size (mm) Ripple Current (mA) Impedance 20°C 100kHz (Ω Max.) 39 4x7 130 0.85 68 5x7 210 0.43 5x11 250 0.30 6.3x7 300 0.23 220 8x7 380 0.15 6.3x11 405 0.130 8x9 380 0.150 560 8x11 760 0.072 680 6.3x11 740 0.065 8x14 995 0.056 8x20 1250 0.041 8x11 780 0.060 8x12 840 0.055 1000 8x14 1000 0.050 8x20 1200 0.035 10x12 1030 0.053 8x20 1250 0.041 10x16 1430 0.038 8x20 1450 0.020 1500 10x12 / 10x15 1030 / 1250 0.053 / 0.045 10x20 2000 0.020 10x20 1750 0.025 10x25 2250 0.017 10x25 2250 0.017 13x21 2360 0.021 3900 13x25 2770 0.018 4700 13x30 2650 0.018 13x35 3400 0.015 16x21 3140 0.018 6800 16x26 3460 0.016 Rated Voltage 10V / 1A Cap (μF) Case Size (mm) Ripple Current (mA) Impedance 20°C 100kHz (Ω Max.) 27 4x7 130 0.89 56 5x7 210 0.44 100 5x11 250 0.30 120 6.3x7 300 0.23 180 8x11 380 0.15 220 6.3x11 405 0.13 470 8x11 720 0.076 8x14 950 0.060 10x12 1030 0.053 8x14 940 0.042 1000 8x20 1250 0.041 10x16 1430 0.038 1200 10x20 1820 0.023 1500 10x25 2150 0.022 2200 13x21 2360 0.021 10x30 2360 3300 0.018 13x25 2770 13x30 3290 0.016 16x21 3140 0.018 4700 13x35 3400 0.015 5600 16x26 3460 0.016, ALUMINUM ELECTROLYTIC CAPACITORS 53

LE

Rated Voltage 16V / 1C Cap (μF) Case Size (mm) Ripple Current (mA) Impedance 20°C 100kHz (Ω Max.) 18 4x7 130 0.92 33 5x7 210 0.45 56 5x11 250 0.30 68 6.3x7 300 0.24 100 6x11 250 0.30 6.3x11 405 0.13 8x11 380 0.15 220 6.3x11 340 0.220 330 8x12 760 0.072 8x12 / 8x14 760 / 995 0.072 / 0.056 10x12 1020 0.045 8x20 1350 0.025 10x16 1430 0.038 8x20 1400 0.028 10x20 1820 0.023 1200 10x25 2150 0.022 10x20 2250 0.022 10x25 2550 0.019 12x21 2360 0.021 13x21 2360 0.021 10x25 2150 0.021 13x25 2770 0.019 3300 13x35 3400 0.015 3900 16x26 3460 0.016 6800 16x32 Rated voltage 25V / 1E Cap (μF) Case Size (mm) Ripple Current (mA) Impedance 20°C 100kHz (Ω Max.) 15 4x7 130 0.94 27 5x7 210 0.46 47 5x11 250 0.30 56 6.3x7 300 0.24 6.3x11 405 0.13 8x7 380 0.15 220 8x12 760 0.072 8x16 995 0.056 10x12 1030 0.053 8x20 1250 0.041 10x16 1430 0.038 680 10x20 1820 0.023 820 10x25 2150 0.022 1000 13x21 2360 0.021 1500 13x25 2770 0.018 13x31 3290 0.016 16x21 3140 0.018 2200 13x35 3400 0.015 2700 16x26 3460 0.016 Rated Voltage 35V / 1V Cap (μF) Case Size (mm) Ripple Current (mA) Impedance 20°C 100kHz (Ω Max.) 10 4x7 130 0.96 18 5x7 210 0.47 33 5x11 250 0.30 39 6.3x7 300 0.25 8x7 380 0.16 6.3x11 405 0.13 150 8x11 760 0.072 8x16 995 0.056 10x12 1030 0.053 270 8x20 1250 0.041 330 10x16 1430 0.038 470 10x20 1820 0.023 560 10x23 2150 0.022 680 10x25 / 13x21 1570 / 2360 0.030 / 0.021 1000 13x25 2770 0.018 13x31 3290 0.016 16x21 3140 0.018 1500 13x35 3400 0.015 1800 16x26 3460 0.016, 54 ALUMINUM ELECTROLYTIC CAPACITORS

LE

Rated Voltage 50V / 1H Cap (μF) Case Size (mm) Ripple Current (mA) Impedance 20°C 100kHz (Ω Max.) 5.6 4x7 130 1.0 10 5x7 210 0.50 5x11 238 0.34 6.3x7 300 0.26 33 8x11 380 0.17 56 6.3x11 385 0.14 100 8x11 724 0.074 120 8x16 950 0.061 150 10x12 979 0.061 180 8x20 1190 0.046 220 10x16 1370 0.042 270 10x20 1580 0.030 330 10x25 1870 0.028 470 13x21 2050 0.027 560 13x26 2410 0.023 680 13x31 2860 0.021 13x35 2960 0.019 16x21 2730 0.023 1000 16x26 3010 0.021 Rated Voltage 63V / 1J Cap (μF) Case Size (mm) Ripple Current (mA) Impedance 20°C 100kHz (Ω Max.) 33 6.3x11 265 0.35 56 8x11 500 0.22 8x14 665 0.16 10x12 685 0.15 8x20 820 0.12 10x16 945 0.11 10x20 1100 0.080 13x16 1135 0.082 220 10x25 1300 0.073 270 13x21 1495 0.060 330 13x25 1850 0.043 13x30 2250 0.039 16x21 1990 0.045 13x35 2450 0.033 16x26 2550 0.032 13x41 2780 0.029 18x20 2450 0.038 16x32 2810 0.026 18x25 2780 0.031 16x36 2835 0.021 18x32 3270 0.025 16x42 3340 0.019 18x36 3310 0.020 1500 18x42 3420 0.018 Rated Voltage 100V / 2A Cap (μF) Case Size (mm) Ripple Current (mA) Impedance 20°C 100kHz (Ω Max.) 6.8 5x11 125 1.40 15 6.3x11 205 0.57 27 8x11 355 0.36 39 8x14 450 0.25 47 10x12 450 0.24 56 8x20 565 0.19 68 10x16 580 0.18 10x20 750 82 0.13 13x16 735 100 10x25 880 0.12 120 13x21 1045 0.094 180 13x25 1195 0.071 13x30 1410 0.063 16x21 1295 0.071 13x35 1560 0.052 16x26 1600 0.053 330 13x40 1700 0.046 390 16x32 1750 0.041 16x36 1890 0.033 18x32 1775 0.039 560 16x42 2080 0.030 680 18x42 2570 0.028,

ME 55MESeries ALUMINUM ELECTROLYTIC CAPACITORS FEATURES

High Ripple Current and Long Life

SPECIFICATION

Item Characteristic Operation Temperature Range -40 ~ +125°C Rated Voltage Range 6.3 ~ 25V.DC Capacitance Tolerance (120Hz 20°C) ±20% (M) I = Leakage Current (μA) Leakage Current (25°C) I = 0.03CV, (After 2 minutes) C = Rated Capacitance (μF) V = Rated Voltage (V) WV 6.3 10 16 25 Surge Voltage (120Hz 20°C) SV 8 13 20 32 Rated Voltage (V) 6.3 10 16 25 Dissipation Factor (25°C, 120Hz) tanδ 0.22 0.19 0.16 0.14 When rated capacitance is over 1000μF, tanδ shall be added 0.02 to the listed value with increase of every 1000μF. After applying rate voltage with rated ripple current (Case size ≤ Ø8, 1500Hrs. ≥ Ø10, 2000Hrs.) at 105°C, 1000Hrs at 125°C the capacitors shall meet the following requirement. Capacitance Change ≤ ±25% of initial value Endurance (Load Life) Dissipation Factor ≤ 200% of initial specified value Leakage Current ≤ 200% specified value Rated Voltage(V) 6.3 10 16 25 Low Temperature Stability Z(-25°C) / Z (120Hz 20°C) 2222Z(-40°C) / Z (120Hz 20°C) 3333

MULTIPLIER FOR RIPPLE CURRENT

Frequency Coefficient Frequency (Hz) 120 1K 10K 100K Coefficient 0.50 0.80 0.90 1.00

DIMENSIONS(mm) Vent (except Ø5 & Ø6.3)

D 8 10 F 3.5 5.0 d 0.5 0.6 α 1.5 2.0 L + α(max), 56 ALUMINUM ELECTROLYTIC CAPACITORS

ME CASE SIZE & MAX RIPPLE CURRENT Size øDXL(mm), Ripple Current (mA r.m.s./125˚C, 100kHz)

Rated voltage 6.3V / 0J Cap (µF) Case Size (mm) ESR (mΩMAX) D×L Ripple Current (mA) 20°C, 100kHz 820 8x12 1140 36 8x12 1010 40 8x14 1120 35 1200 8x16 1490 28 8x20 1870 16 1500 10x12 / 10x15 1540 26 10x20 2000 20 8x20 1870 20 10x20 2000 20 10x20 2200 2550 16 10x25 10x25 3300 2800 14 10x30 Rated voltage 10V / 1A Case Size (mm) ESR (mΩMAX)Cap (µF) D×L Ripple Current (mA) 20°C, 100kHz 680 8x14 1140 38 8x20 1490 29 10x16 1540 26 8x20 1870 20 10x20 2000 20 1800 10x20 2550 16 2200 10x25 2800 14 Rated voltage 16V / 1C Case Size (mm) ESR (mΩMAX)Cap (μF) D×L Ripple Current (mA) 20°C, 100kHz 8x12 910 0.048 8x14 1140 37 8x20 1490 29 10x15 1540 27 8x20 1870 22 1000 10x15 1386 0.028 10x20 2000 22 10x20 1413 0.032 10x25 2550 18 1800 10x25 2800 14 10x25 1645 0.028 13x25 2012 0.026 Rated voltage 25V / 1E Case Size (mm) ESR (mΩMAX)Cap (µF) D×L Ripple Current (mA) 20°C, 100kHz 470 10x20 2000 22,

MZ 57MZSeries ALUMINUM ELECTROLYTIC CAPACITORS FEATURES

105°C Ultra Low ESR

SPECIFICATION

Item Characteristic Operation Temperature Range -40 ~ +105°C Rated Working Voltage 6.3 – 16 V.DC Capacitance Tolerance (120Hz 20°C) ±20% (M) Leakage Current I : Leakage Current(uA) I ≤ 0.03CV (After 2 minutes) C : Rated Capacitance(μF) (120Hz 20°C) V : Rated Voltage(V) WV 6.3 10 16 Surge Voltage (120Hz 20°C) SV 8 13 20 Rated Voltage (V) 6.3 10 16 Dissipation Factor (120Hz 20°C) (tanδ) tanδ 0.22 0.19 0.16 When rated capacitance is over 1000μF, tanδshall be added 0.02 to the listed value with increase of every 1000 μF. After applying rated voltage with rated ripple current for 2000 Hrs at 105°C the capacitors shall meet the following requirements. Endurance Capacitance Change ≤ ±25% of initial value (Load Life) Dissipation Factor ≤ 200% of initial specified value Leakage Current ≤ 200% specified value Rated Voltage (V) 6.3 10 16 Low Temperature Stability Z(-25°C) / Z(+20°C) 222Z(-40°C) / Z(+20°C) 333

MULTIPLIER FOR RIPPLE CURRENT

Frequency 120 1k 10k 100k Coefficient 0.5 0.80 0.90 1.00 Specifications subject to change without notice.

DIMENSIONS (mm) Vent

D 8 10 F 3.5 5.0 d 0.5 0.6 L + α(max) α 1.5 2.0, 58 ALUMINUM ELECTROLYTIC CAPACITORS

MZ CASE SIZE & MAX RIPPLE CURRENT Size øDXL(mm), Ripple Current (mA r.m.s./105˚C, 100kHz)

Rated Voltage 6.3V / 0J µF DxL R.C. E.S.R.(100kHz mΩ)(Max) 820 8x11 1340 22 1200 8x16 1850 18 1500 10x16 2460 16 1800 8x20 2350 12 1800 10x16 2460 13 2200 10x20 2770 11 3300 10x25 3230 10 Rated Voltage 10V / 1A µF DxL R.C. E.S.R.(100kHz mΩ)(Max) 680 8x12 1340 22 1000 8x16 1850 18 1000 10x15 1960 16 1500 8x20 2350 12 1500 10x16 2460 12.5 1800 10x20 2770 11 2200 10x25 3230 10 Rated Voltage 16V / 1C µF DxL R.C. E.S.R.(100kHz mΩ)(Max) 470 8x12 1340 22 680 8x16 1850 18 680 10x15 1960 16 1000 8x20 2350 12 1000 10x16 2460 15 1500 10x20 2770 12 1800 10x25 3230 10,

ZH 59ZHSeries ALUMINUM ELECTROLYTIC CAPACITORS FEATURES

Long Life, Low Impedance

SPECIFICATION

Item Characteristic Operation Temperature Range -40 to +105°C Rated Working Voltage 6.3 ~35 V.DC Capacitance Tolerance (120Hz 20°C) ±20% (M) Leakage Current I ≤ 0.001CV or 3μA Whichever is greater. I : Leakage Current(μA) (120Hz 20°C) (After 2 minutes) C : Rated Capacitance(μF) V : Rated Voltage(V) Surge Voltage WV 6.3 10 16 25 35 (120Hz 20°C) SV 8 13 20 32 44 WV 6.3 10 16 25 35 Dissipation Factor (120Hz 20°C) (tanδ) tanδ 0.22 0.19 0.16 0.14 0.12 When rated capacitance is over 1000µF, tanδ shall be added 0.02 to the listed value with increase of every 1000µF. Rated Voltage (V) 6.3 10 16 25 35 Low Temperature Stability Z(-25°C) / Z(+25°C) 22222Z(-40°C) / Z(+25°C) 33333After life test with rated ripple current at conditions stated in the table below, the capacitors shall meet the following requirements. Capacitance Change ≤ ±25% of initial value Endurance (Load Life) Dissipation Factor ≤ 200% of initial specified value Leakage Current ≤ initial specified value

DIMENSIONS (mm) Vent

D 5 6.3 8 10 13 16 18 22 25 F 2.0 2.5 3.5 5.0 7.5 10 12 d 0.5 0.6 0.8 0.8 α 1.5 2.0 2.0 2.0 L + α(max)

MULTIPLIER FOR RIPPLE CURRENT

Frequency 120 1k 10k 100k 47~270µF 0.50 0.73 0.92 1.00 330~680µF 0.55 0.77 0.94 1.00 Coefficient 820~1800µF 0.60 0.80 0.96 1.00 2200~8200µF 0.70 0.85 0.98 1.00, 60 ALUMINUM ELECTROLYTIC CAPACITORS

ZH CASE SIZE & MAX RIPPLE CURRENT

Rated voltage 6.3V / 0J µF DxL(mm) Ripple Current(mA) Impedance 25°C 100kHz(mΩ Max) 220 5x11 330 240 470 6.3x11 500 110 820 8x12 900 65 1200 8x16 1210 50 1200 10x12 1240 47 1500 8x20 1410 35 1800 10x16 1650 34 2200 10x20 1960 20 2700 10x23 2250 18 3900 13x21 2480 18 4700 13x25 2900 16 5600 13x30 3450 15 6800 16x20 3250 17 6800 13x36 3570 15 8200 16x25 3630 15 Rated voltage 10V / 1A µF DxL(mm) Ripple Current(mA) Impedance 25°C 100kHz(mΩ Max) 150 5x11 330 240 330 6.3x11 500 110 680 8x12 900 65 1000 8x16 1210 50 1000 10x12 1240 47 1500 8x20 1410 35 1500 10x16 1650 34 1800 10x20 1960 20 2200 10x23 2250 18 3300 13x21 2480 18 3900 13x25 2900 16 4700 13x30 3450 15 4700 16x20 3250 17 5600 13x36 3570 15 6800 16x25 3630 15, ALUMINUM ELECTROLYTIC CAPACITORS 61

ZH

Rated voltage 16V / 1C µF DxL(mm) Ripple Current(mA) Impedance 25°C 100kHz(mΩ Max) 100 5x11 330 240 220 6.3x11 500 110 470 8x12 900 65 680 8x16 1210 50 680 10x12 1240 47 1000 8x20 1410 35 1000 10x16 1650 34 1500 10x20 1960 20 1800 10x23 2250 18 2200 13x21 2480 18 2700 13x25 2900 16 3300 13x30 3450 15 3300 16x20 3250 17 3900 13x36 3570 15 4700 16x25 3630 15 Rated voltage 25V / 1E µF DxL(mm) Ripple Current(mA) Impedance 25°C 100kHz(mΩ Max) 68 5x11 330 240 150 6.3x11 500 110 330 8x12 900 65 390 8x16 1210 50 470 10x12 1240 47 560 8x20 1410 35 680 10x16 1650 34 820 10x20 1960 20 1000 10x23 2250 18 1500 13x20 2480 18 1800 13x25 2900 16 2200 13x30 3450 15 2200 16x20 3250 17 2700 13x35 3570 15 3300 16x25 3630 15 Rated voltage 35V / 1V µF DxL(mm) Ripple Current(mA) Impedance 25°C 100kHz(mΩ Max) 47 5x11 330 240 100 6.3x11 500 110 220 8x11 900 65 270 8x16 1210 50 330 10x12 1240 47 390 8x20 1410 35 470 10x16 1650 34 560 10x20 1960 20 680 10x23 2250 18 1000 13x20 2480 18 1200 13x25 2900 16 1500 13x30 3450 15 1500 16x20 3250 17 1800 13x35 3570 15 2200 16x25 3630 15,

LA LA Series ALUMINUM ELECTROLYTIC CAPACITORS FEATURES

Low Impedance For Small Size

SPECIFICATION

Item Characteristic Operation Temperature Range -40 to + 105°C Rated Working Voltage 6.3 – 35 V.DC Capacitance Tolerance (120Hz 20°C) ±20% (120Hz) Leakage Current I : Leakage Current(μA) (120Hz 20°C) I ≤ 0.01CV After 2 minutes C : Rated Capacitance(μF) V : Rated Voltage(V) W V 6.3 10 16 25 35 Dissipation Factor (120Hz 20°C) (tanδ) tanδ 0.15 0.13 0.12 0.10 0.10 After 1000 hours application of WV at +105°C the capacitors shall meet the following requirement. Other life test at conditions stated in the table below. Load Life Capacitance Change ≤ ±25% of initial value Dissipation Factor ≤ 200% of initial specified value Leakage Current ≤ initial specified value

RIPPLE CURRENT FOR FREQUENCY MULTIPLIERS

Frequency (Hz) 120 1K 10K 100K CAP(μF) 4.7~ 33 0.40 0.68 0.90 1.00 47~330 0.47 0.75 0.95 1.00 470~1000 0.55 0.85 0.98 1.00

DIMENSIONS

D 4x7 5x7 6.3x7 6.3x11 8x11 10x12 10x16 F 1.5 2.0 2.5 3.5 5.0 d 0.45 0.50 0.60 α 1.0 1.5 2.0 Vent (except Ø8 & Ø10) L + α(max), ALUMINUM ELECTROLYTIC CAPACITORS 63

LA CASE SIZE & MAX RIPPLE CURRENT Size øDXL(mm), Ripple Current (mA r.m.s./105˚C, 100kHz)

Rated Voltage 6.3V / 0J Cap (μF) Case Size (mm) Ripple Current (mA) Impedance 25˚C (Ω Max) 22 5x7 230 0.52 33 5x7 350 0.48 47 6.3x7 480 0.26 100 6.3x11 640 0.15 220 8x11 910 0.077 330 8x11 1000 0.043 470 8x11 1000 0.043 1000 10x16 1650 0.025 Rated Voltage 10V / 1A Cap (μF) Case Size (mm) Ripple Current (mA) Impedance 25˚C (Ω Max) 10 4x7 190 0.60 22 5x1 230 0.49 33 6.3x7 350 0.26 47 6.3x7 350 0.26 100 6.3x11 480 0.15 220 8x11 1000 0.044 8x11 330 1000 0.043 10x12 470 10x12 1300 0.035 Rated Voltage 16V / 1C Cap (μF) Case Size (mm) Ripple Current (mA) Impedance 25˚C (Ω Max) 22 5x7 350 0.27 33 5x7 350 0.26 47 6.3x7 480 0.15 100 6.3x11 670 0.078 220 8x12 1000 0.044 330 10x12 1300 0.030 470 10x16 1740 0.025 Rated Voltage 25V / 1E Cap (μF) Case Size (mm) Ripple Current (mA) Impedance 25˚C (Ω Max) 10 4x7 230 0.52 22 5x7 350 0.27 33 6.3x7 480 0.16 47 6.3x7 480 0.15 100 6.3x11 670 0.078 220 10x12 1300 0.031 330 10x16 1140 0.026 Rated Voltage 35V / 1V Cap (μF) Case Size (mm) Ripple Current (mA) Impedance 25˚C (Ω Max) 4.7 4x7 230 0.64 10 5x7 350 0.33 22 6.3x7 480 0.17 33 6.3x7 480 0.16 47 6.3x11 670 0.089 100 8x12 1000 0.048 220 10x16 1740 0.026,

PARTS NUMBER SYSTEM FOR THE SMD TYPE

E2 Series 16V 10 μF ± 20% 4Øx5.3L Carrier tape

E2 16V 100 M D55 R V

123456Series Name Rated Voltage Capacitance Capacitance Symbol of Package type Tolerance Case Size 1. Series: Series is represented by a two digit code. If there are 2 digits only for series code, keep blank on the third digit. 2. Rated Voltage: Voltage on volts (V) is represented by two digit code showing the real working voltage. 3. Capacitance: Rated capacitance in μF is represented by a three digit number. The first two digits are the significant figures of the nominal capacitance and the third digit indicates the number of zeros following these figures. The decimal point is represent by the capital letter R. Please refer to the follow ing example: μF 0.1 0.47 1 4.7 10 47 100 470 1000 Part number 0R1 R47 010 4R7 100 470 101 471 102 4. Tolerance: Symbol of W, T, Q, V, M, K and show special capacitance tolerance which are listed are follows: W = -10% ~ +100% M = -20% ~ +20% T = -10% ~ +50% K = -10% ~ +10% Q = -10% ~ +30% J = -5% ~ +5% v = -10% ~ +20% 5. Case Size: Symbol of case size are listed as follows: Ø DxL (mm) Symbol Ø DxL (mm) Symbol Ø DxL (mm) Symbol Ø DxL (mm) Symbol 3x5.3 B55 6.3X5.3 F55 8X6.5 G68 10X10.0 H10 4x5.3 D55 6.3X5.7 F60 8X7.0 G72 10X13.0 H13 4x5.7 D60 6.3X6.0 F62 8X10.0 G10 12.5X13.5 K14 5x5.3 E55 6.3X7.0 F72 8X12.0 G12 12.5X16.0 K16 5x5.7 E60 6.3X7.7 F80 10X8.0 H82 16X16.0 L17 6. Package type: R Taping polarity symbol with reel package in 380 mm M Taping polarity symbol with reel package in 450 mm T Tray

SMD TYPE Unit: pcs

Case Q’ ty / Reel Q’ ty / Box4Ø2,000 10,0005Ø1,000 5,000 6.3 Ø 1,000 5,0008Øx6.5 ~ 7 L 1,000 5,0008Øx10 L 500 2,0008Øx11.8 L 400 2,000 10Øx8~ 10 L 500 2,000 10Øx12.7 L 400 2,000 12.5Øx13.5 L 200 / 350* 800 / 1,400* 12.5Øx16 L 150 / 300* 600 / 1,200* 16Øx16.5 L 125 / 200* 500 / 800* “ * “ Suitable for reel packing is 450 mm, SMD ALUMINUM ELECTROLYTIC CAPACITORS 65

REFLOW CONDITION RECOMMENDED PAD PATTERN AND SIZE Case Case Land size Land size

size code Case size CaseXYWcodeXYW

YWY3x5.3 B55 1.6 2.2 0.8 8x6.5 G68 1.6 4.0 2.1

4x5.3 D55 1.6 2.6 1.0 8x7.0* G72 2.5 3.5 3.0 4x5.7 D60 1.6 2.6 1.0 8x10 G10 2.5 3.5 3.0 5x5.3 E55 1.6 3.0 1.4 8x12.0* G12 2.5 3.5 3.0

X

5x5.7 E60 1.6 3.0 1.4 10x8.0* H82 2.5 4.4 4.3 6.3x5.3 F55 1.6 3.5 1.9 10x10.0 H10 2.5 4.0 4.0 6.3x5.7 F60 1.6 3.5 1.9 10x13.0* H13 2.5 4.4 4.3 6.3x6.0* F62 1.6 3.5 2.1 12.5x13.5 K14 4.0 7.5 7.0 6.3x7.0* F72 1.6 3.5 2.1 12.5x16 K16 4.0 7.5 7.0 6.3x7.7 F80 1.6 3.5 1.9 16x16.5 L17 6.0 8.5 9.5

Case size in mark of “ * “ is for OC-CON capacitors application. RECOMMENDED SOLDERING METHODS Method Reflow soldering Soldering iron Flow soldering Advisability Recommended Recommended Not Recommended LEAD-FREE TYPE (1) Method is as follow.

Reflow soldering condition. Temperature (°C) t3 The following temperature profile condition should T4 be observed for soldering. (For high temperature, T3 pleases contact us after measuring the capacitor’s product temperature profile at your side.) T2 Product temperature will rise slower as the product T1 size gets bigger. It is not necessary to adjust the reflow furnace temperature setting according to the t1 t2 product size, for example, Φ4 and Φ10 products can be mixed on one PCB forreflowing. Time (2) Soldering precautions.

LEAD-FREE TYPE 1. Elements related to the reflow soldering temperature

* Product size: The temperature rises slower as Type Non-solid capacitor OC-CON the size gets bigger. WV 4 ~50V 63V ~ 4V ~ - - - * Product location: The center part of the PCB Case size (Ø) 4 ~ 6.3 4 ~ 6.3 8 ~ 16 - - - tends to have a lower temperature than the PCB edges. Temp.(T1 ~ T2, °C) 150 ~ 180 Preheat * Product size: The PCB temperature rises Time(t1)(Max, secs) 100 90 slower as the area and/or thickness of the Temp.(T3, °C) 217 230 217 217 200 217 230 PCB gets greater. Duration Time(t2)(Max, secs) 90 60 60 40 60 50 40 2. Repeated reflowing * Avoid reflowing twice if possible. Temp.(T4, °C) 260 250 240 250 260 Peak * If repeated reflowing is unavoidable, contact us Time(t3, secs) 55555after measuring the first and second reflow Reflow cycles12or less21profiles and reflow interval at your side. * Do not attempt to reflow three times. 3. Soldering with soldering iron Observe the follwing conditions. * The iron tip temperature: 350 ± 5°C * Soldering item: 3+1 / -0 seconds.,

VE VESeries SMD ALUMINUM ELECTROLYTIC CAPACITORS FEATURES

. 3~10Ø, 85°C, 2,000 hours assured.Chip type large capacitance capacitors.Designed for surface mounting on high density PC board.RoHS Compliance

SPECIFICATIONS

Items Performance Operating Temperature Range -40°C ~ +85°C Capacitance Tolerance ±20°% (at 120Hz,20°C) Leakage Current (at 20°C) I=0.01CV or 3(μA), whichever is greater (after 2 minutes) Where, C=rated capacitance in μF. V=rated DC working voltage in V. Dissipation Factor Rated Voltage 4 6.3 10 16 25 35 50 63 100 (Tan δ at 120Hz, 20°C) Tan δ(max) 0.42 0.28 0.24 0.20 0.14 0.12 0.10 0.10 0.10 Impedance ratio shall not exceed the values given in the table below. Rated Voltage 4 6.3 10 16 25 35 50 63 100 Low Temperature Characteristics (ar 120Hz) Impedance Z(-25°C)Z(+20°C) 743222222Ratio Z(-40°C)Z(+20°C) 1585433333Test Time 2,000 Hrs Capacitance Change Within ±20% of initial value (4WV; ±30%) Load Life Test Dissipation Factor Less than 200% 0f specified value (4WV; ±300%) Leakage Current Within specified value *The above specifications shall be satisfied when the capacitors are restored to 20°C after the rated voltage applied for 2,000 hrs at 85°C. Shelf Life Test Test time: 1,000 hrs; other items are the same as those for the load life test V.DC (V) Freg. (Hz) 50 120 1K 10K up Under 16 0.8 1.0 1.15 1.25 Ripple Current & Frequency Multipliers 25 ~ 35 0.8 1.0 1.25 1.40 50 ~ 63 0.8 1.0 1.35 1.50 100 0.7 1.0 1.35 1.50 Other Standards JIS C 5101-1,-18

LEAD SPACING AND DIAMETER Unit:mm DIAGRAM OF DIMENSIONS

ØDLABCWP±0.2 3 5.3±0.2 3.3 3.3 1.5 0.45~0.75 0.8 4 5.3±0.2 4.3 4.3 2.0 0.5 to 0.8 1.0 5 5.3±0.2 5.3 5.3 2.3 0.5 to 0.8 1.5 6.3 5.3±0.2 6.6 6.6 2.7 0.5 to 0.8 2.0 6.3 7.7±0.3 6.6 6.6 2.7 0.5 to 0.8 2.0 8 6.5±0.3 8.4 8.4 3.4 0.5 to 1.1 2.3 8 10±0.5 8.4 8.4 3.0 0.7 to 1.1 3.1 10 10±0.5 10.4 10.4 3.3 0.7 to 1.1 4.7 10 10±0.5 10.4 10.4 3.3 0.7 to 1.1 4.7, SMD ALUMINUM ELECTROLYTIC CAPACITORS 67

VE

Dimension: ØDxL(mm)

DIMENSION & PERMISSIBLE RIPPLE CURRENT Ripple Current: mA/rms at 120 Hz,85°C

V.DC 4V(0G) 6.3V(0J) 10V(1A) 16V(1C) 25V(1E) µF Content Ø DxL mA Ø DxL mA Ø DxL mA Ø DxL mA Ø DxL mA 4.7 47 4x5.3 19 10 100 4x5.3 23 4(3)x5.3 26(14) 5x5.3 32 4x5.3 30 22 220 3x5.3 14 4x5.3 23 5x5.3 39 6.3x5.3 55 5x5.3 44 4x5.3 33 5x5.3 54 33 330 4x5.3 31 4x5.3 31 6.3x5.3 63 5x5.3 48 6.3x5.3 67 4x5.3 37 5x5.3 52 6.3x5.3 75 47 470 4x5.3 34 6.3x5.3 67 5x5.3 50 6.3x5.3 75 * 8x6.5 155(98) 5x5.3 63 6.3x5.3 103 68 680 5x5.3 54 6.3x5.3 89 6.3x5.3 98 6.3x5.3 98 * 8x6.5 155(109) 5x5.3 58 5x5.3 63 5x5.3 65 6.3x5.3 110 6.3x7.7 124 100 101 6.3x5.3 110 6.3x5.3 89 6.3x5.3 98 * 8x6.5 155(108) * 8x6.5 155(124) * 8x6.5 155(108) 6.3x5.3 110 6.3x7.7 124 220 221 6.3x5.3 110 * 8x10 252(124) 8x10 252 * 8x6.5 155(123) * 8x6.5 155(130) 330 331 * 8x6.5 155(139) 8x10 252 8x10 252 10x10 458 470 471 8x10 252 10x10 458 10x10 458 1000 102 10x10 458 10x10 458 1500 152 10x10.3 458 V.DC 35V(1V) 50V(1H) 63V(1J) 100V(1V) µF Content Ø DxL mA Ø DxL mA Ø DxL mA Ø DxL mA 0.1 0R1 4x5.3 3 0.22 R22 4x5.3 5 0.33 R33 4x5.3 6 0.47 R47 4x5.371010 4x5.3 10 2.2 2R2 4x5.3 15 3.3 3R3 3x5.3 8 4x5.3 19 4x5.3 20 4.7 4R7 4x5.3 20 5x5.3 26 4x5.3 27 5x5.3 34 10 100 8x6.5 75 8x10 94 5x5.3 34 6.3x5.3 44 5x5.3 47 6.3x5.3 59 22 220 8x10 139 10x10 189 6.3x5.3 59 * 8x6.5 155(65) 6.3x5.3 67 6.3x7.7 82 33 330 8x10 139 10x10 189 * 8x6.5 155(85) * 8x6.5 155(82) 6.3x7.7 98 47 470 * 8x6.5 155(98) 10x10 226 * 8x10 252(98) 6.3x7.7 109 68 680 8x10 252 10x10 226 * 8x6.5 155(109) 8x10 252 100 101 * 8x10 252 10x10 226 10x10 458 220 221 10x10 458 10x10 458 * 6.3x7.7 is available and ( ) is its ripple current.,

EA EASeries SMD ALUMINUM ELECTROLYTIC CAPACITORS FEATURES

. 4~16Ø 85°C, 2,000 hours assured.Designed for surface mounting on high density PC board.RoHS Compliance

SPECIFICATIONS

Items Performance Operating Temperature Range -40°C ~ +85°C Capacitance Tolerance ±20°% (at 120Hz,20°C) 4~10Ø I=0.01CV or 3μA,whichever is greater,after 2 minutes at 20°C 6.3~100V Leakage Current (at 20°C) 12.5~16Ø I=0.03CV or 4μA,whichever is greater,after 2 minutes at 20°C 160~450V 12.5~16Ø I=0.04CV+100μA after 5 minutes at+20°C Where I = leakage current C=rated capacitance in μF. V=rated DC working voltage in V. Rated Voltage 6.3 10 16 25 35 50 63 100 160~250 400~450 Dissipation Factor 4~10Ø 0.35 0.30 0.26 0.16 0.14 0.12 0.12 0.12 - - (Tan δ at 120Hz, 20°C) 12.5~16Ø 0.38 0.34 0.30 0.26 0.22 0.18 0.14 0.10 0.20 0.25 When the capacitance exceeds 1,000μF ,0.02 shall be added every 1,000μF increase. Impedance ratio shall not exceed the values given in the table below. Rated Voltage 6.3 10 16 25 35 50 63 100 160~250 400~450 Low Temperature Z(-25°C) 4~10Ø44322223- - Characteristics (ar 120Hz) /Z(+20°C)Impedance 12.5~16Ø - 542322236Ratio Z(-40°C) 4~10Ø 17 10843334- - /Z(+20°C) 12.5~16Ø - 12 1054333610 Test Time 2,000 Hrs Capacitance Change Within ±20% of initial value Load Life Test Dissipation Factor Less than 200% 0f specified value Leakage Current Within specified value *The above specifications shall be satisfied when the capacitors are restored to 20°C after the rated voltage applied for 2,000 hrs at 85°C. Shelf Life Test Test time: 1,000 hrs; other items are the same as those for the load life test Other Standards JIS C 5101-1,-18

LEAD SPACING AND DIAMETER Unit:mm DIAGRAM OF DIMENSIONS

ØDLABCWP±0.2 Fig.No. 4 5.3±0.2 4.3 4.3 2.0 0.5 to 0.8 1.0155.3±0.2 5.3 5.3 2.3 0.5 to 0.8 1.5 1 6.3 5.3±0.2 6.6 6.6 2.7 0.5 to 0.8 2.0 1 6.3 7.7±0.3 6.6 6.6 2.7 0.5 to 0.8 2.01810±0.5 8.4 8.4 3.0 0.7 to 1.1 3.11810.3±0.5 8.4 8.4 3.0 0.7 to 1.1 3.1 1 10 10±0.5 10.4 10.4 3.3 0.7 to 1.1 4.7 1 10 10.3±0.5 10.4 10.4 3.3 0.7 to 1.1 4.7 1 12.5 13.5±0.5 12.8 12.8 4.9 1.1 to 1.4 4.2 2 12.5 16±0.5 12.8 12.8 4.9 1.1 to 1.4 4.2 2 16 16.5±0.5 16.3 16.3 5.8 1.1 to 1.4 6.0 2, SMD ALUMINUM ELECTROLYTIC CAPACITORS 69

EA Dimension: ØDxL(mm) DIMENSION & PERMISSIBLE RIPPLE CURRENT Ripple Current: mA/rms at 120 Hz,85°C V .DC 6.3V(0J) 10V(1A) 16V(1C) 25V(1E) 35V(1V) 50V(1H) 63V(1J)

µF Content Ø DxL mA Ø DxL mA Ø DxL mA Ø DxL mA Ø DxL mA Ø DxL mA Ø DxL mA 0.1 0R1 4x5.3 3 4x5.3 1.3 0.22 R22 4x5.3 5 4x5.3 3 0.33 R33 4x5.3 6 4x5.3 4 0.47 R47 4x5.3 7 4x5.351010 4x5.3 10 4x5.3 8 2.2 2R2 4x5.3 15 4x5.3 12 3.3 3R3 4x5.3 15 5x5.3 17 4.7 4R7 4x5.3 19 4x5.3 18 4x5.3 18 5x5.3 20 10 100 4x5.3 26 4x5.3 26 4x5.3 24 4x5.3 24 5x5.3 30 6.3x.3 32 22 220 4x5.3 30 4x5.3 26 4x5.3 26 5x5.3 41 5x5.3 41 6.3x5.3 47 6.3x7.7 60 33 330 4x5.3 30 5x5.3 30 5x5.3 37 5x5.3 47 6.3x5.3 54 6.3x7.7 70 6.3x7.7 60 47 470 4x5.3 33 6.3x5.3 44 5x5.3 44 6.3x5.3 60 6.3x5.3 64 6.3x7.7 85 8x10 130 68 680 5x5.3 40 6.3x5.3 60 6.3x5.3 60 6.3x7.7 100 6.3x7.7 100 8x10 110 10x10 170 6.3x7.7 120 100 101 5x5.3 40 6.3x5.3 60 6.3x5.3 60 6.3x7.7 100 8x10 130 12.5x13.5 380 8x10 280 8x10.3 280 220 221 6.3x5.3 88 6.3x7.7 130 6.3x7.7 130 8x10 260 10x10 170 12.5x13.5 580 10x10 360 330 331 6.3x7.7 135 8x10 270 8x10 270 8x10.3 280 10x10.3 360 12.5x13.5 600 12.5x16 720 470 470 8x10 280 8x10 280 8x10 280 10x10 400 12.5x13.5 600 12.5x16 740 16x16.5 950 1000 102 8x10.3 430 10x10 430 12.5x13.5 710 12.5x13.5 820 16x16.5 1100 2200 222 12.5x13.5 890 12.5x13.5 960 16x16.5 1150 16x16.5 1450 1300 332 12.5x16 1000 16x16.5 1300 16x16.5 1150 4700 472 16x16.5 1400 16x16.5 1300 6800 682 16x16.5 1700

V.DC 100V(2A) 160V(2C) 200V(2D) 250V(2E) 400V(2G) 450V(2W)

µF Content Ø DxL mA Ø DxL mA Ø DxL mA Ø DxL mA Ø DxL mA Ø DxL mA 4.7 4R7 12.5x13.5 120 12.5x13.5 120 10 100 8x10 90 12.5x13.5 150 12.5x13.5 120 12.5x16 130 22 220 8x10 90 12.5x13.5 240 12.5x13.5 150 16x16.5 140 16x16.5 140 33 330 10x10 120 12.5x13.5 240 12.5x16 310 12.5x16 240 16x16.5 140 47 470 10x10 120 12.5x16 370 16x16.5 340 16x16.5 340 68 680 12.5x13.5 380 16x16.5 500 16x16.5 340 100 101 12.5x13.5 380 220 221 16x16.5 500,

ES ESSeries SMD ALUMINUM ELECTROLYTIC CAPACITORS FEATURES

. 4~6.3Ø 105°C, 1,000 hours assured.Vertical chip type miniaturized forv 5.5mm high capacitor.Designed for surface mounting on high density PC board.RoHS Compliance

SPECIFICATIONS

Items Performance Operating Temperature Range -55°C ~ +105°C Capacitance Tolerance ±20°% (at 120Hz,20°C) Leakage Current (at 20°C) I=0.01CV or 3(μA), whichever is greater (after 2 minutes) Where, C=rated capacitance in μF. V=rated DC working voltage in V. Dissipation Factor Rated Voltage 6.3 10 16 25 35 50 (Tan δ at 120Hz, 20°C) Tan δ(max) 0.30 0.26 0.22 0.16 0.13 0.12 Impedance ratio shall not exceed the values given in the table below. Low Temperature Rated Voltage 6.3 10 16 25 35 50 Characteristics (ar 120Hz) Z(-25°C)Z(+20°C) 432222Impedance Ratio Z(-40°C)Z(+20°C) 854333Test Time 1,000 Hrs Capacitance Change Within ±20% of initial value Load Life Test Dissipation Factor Less than 200% 0f specified value Leakage Current Within specified value *The above specifications shall be satisfied when the capacitors are restored to 20°C after the rated voltage applied for 1,000 hrs at 105°C. Shelf Life Test Test time: 1,000 hrs; other items are the same as those for the load life test Freg. (Hz) V.DC (V) 50 120 1K 10K up Ripple Current & Under 16 0.8 1.0 1.15 1.25 Frequency Multipliers 25~35 0.8 1.0 1.25 1.40 50 0.8 1.0 1.35 1.50 Other Standards JIS C 5101-1,-18

LEAD SPACING AND DIAMETER Unit:mm DIAGRAM OF DIMENSIONS

ØDLABCWP±0.2 4 5.3±0.2 4.3 4.3 2.0 0.5 to 0.8 1.0 5 5.3±0.2 5.3 5.3 2.3 0.5 to 0.8 1.5 6.3 5.3±0.2 6.6 6.6 2.7 0.5 to 0.8 2.0 Dimension: ØDxL(mm)

DIMENSION & PERMISSIBLE RIPPLE CURRENT Ripple Current: mA/rms at 120 Hz, 105°C

V.DC 6.3V(0J) 10V(1A) 16V(1C) 25V(1E) 35V(1V) 50V(1H) µF Content Ø DxL mA Ø DxL mA Ø DxL mA Ø DxL mA Ø DxL mA Ø DxL mA 0.1 OR1 4x5.3 2 0.22 R22 4x5.3 3 0.33 R33 4x5.3 4 0.47 R47 4x5.351010 4x5.3 7 2.2 2R2 4x5.3 10 3.3 3R3 4x5.3 12 4.7 4R7 4x5.3 12 4x5.3 14 5x5.3 17 10 100 4x5.3 15 4x5.3 16 5x5.3 21 5x5.3 23 6.3x5.3 26 22 220 4x5.3 21 5x5.3 25 5x5.3 28 6.3x5.3 36 6.3x5.3 50 6.3x5.3 51 33 330 5x5.3 30 5x5.3 31 6.3x5.3 40 6.3x5.3 44 47 470 5x5.3 36 6.3x5.3 43 6.3x5.3 47 6.3x5.3 60 100 101 6.3x5.3 61 6.3x5.3 65 6.3x5.3 70,

EU 71EUSeries SMD ALUMINUM ELECTROLYTIC CAPACITORS FEATURES

. 4~10Ø 105°C, 3,000 hours assured.Long life assured.Designed for surface mounting on high density PC board.RoHS Compliance

SPECIFICATIONS

Items Performance Operating Temperature Range -40°C ~ +105°C Capacitance Tolerance ±20°% (at 120Hz,20°C) Leakage Current (at 20°C) I=0.01CV or 3(μA), whichever is greater (after 2 minutes) Where, C=rated capacitance in μF. V=rated DC working voltage in V. Dissipation Factor Rated Voltage 6.3 10 16 25 35 50 (Tan δ at 120Hz, 20°C) Tan δ(max) 0.30 0.24 0.20 0.16 0.13 0.12 Impedance ratio shall not exceed the values given in the table below. Low Temperature Rated Voltage 6.3 10 16 25 35 50 Characteristics (ar 120Hz) Z(-25°C)Z(+20°C) 432222Impedance Ratio Z(-40°C)Z(+20°C) 1075333Test Time 3,000 Hrs Capacitance Change Within ±30% of initial value Load Life Test Dissipation Factor Less than 300% 0f specified value Leakage Current Within specified value *The above specifications shall be satisfied when the capacitors are restored to 20°C after the rated voltage applied for 3,000 hrs at 105°C. Shelf Life Test Test time: 1,000 hrs; other items are the same as those for the load life test Ripple Current & Freg. (Hz)V.DC (V) 50 120 1K 10K up Frequency Multipliers 6.3 ~ 50 0.70 1.00 1.36 1.50 Other Standards JIS C 5101-1,-18

LEAD SPACING AND DIAMETER Unit:mm DIAGRAM OF DIMENSIONS

ØDLABCWP±0.2 4 5.7±0.3 4.3 4.3 2.0 0.5 to 0.8 1.0 5 5.7±0.3 5.3 5.3 2.3 0.5 to 0.8 1.5 6.3 5.7±0.3 6.6 6.6 2.7 0.5 to 0.8 2.0 6.3 7.7±0.3 6.6 6.6 2.7 0.5 to 0.8 2.0 8 10±0.5 8.4 8.4 3.0 0.7 to 1.1 3.1 10 10±0.5 10.4 10.4 3.3 0.7 to 1.1 4.7 Dimension: ØDxL(mm)

DIMENSION & PERMISSIBLE RIPPLE CURRENT Ripple Current: mA/rms at 120 Hz, 105°C

V.DC 6.3V(0J) 10V(1A) 16V(1C) 25V(1E) 35V(1V) 50V(1H) µF Content Ø DxL mA Ø DxL mA Ø DxL mA Ø DxL mA Ø DxL mA Ø DxL mA 0.1 OR1 4x5.7 1 0.22 R22 4x5.7 2.6 0.33 R33 4x5.7 3.2 0.47 R47 4x5.751010 4x5.7 8 2.2 2R2 4x5.7 12 3.3 3R3 4x5.7 17 4.7 4R7 4x5.7 16 5x5.7 22 10 100 4x5.7 18 5x5.7 27 5x5.7 27 6.3x5.7 32 22 220 4x5.7 22 4x5.7 30 5x5.7 30 6.3x5.7 44 6.3x5.7 44 6.3x7.7 58 33 330 5x5.7 35 5x5.7 35 6.3x5.7 48 6.3x5.7 50 6.3x7.7 57 8x10 130 47 470 5x5.7 38 6.3x5.7 50 6.3x5.7 50 6.3x7.7 63 8x10 141 8x10 141 100 101 6.3x5.7 69 6.3x7.7 81 6.3x7.7 81 8x10 141 10x10 290 10x10 310 220 221 6.3x7.7 120 8x10 141 8x10 141 10x10 290 10x10 320 330 331 8x10 290 10x10 290 10x10 290 10x10 320 470 471 10x10 320 10x10 320 10x10 320 1000 102 10x10 410,

GA GASeries SMD ALUMINUM ELECTROLYTIC CAPACITORS FEATURES

. 4~16Ø 105°C, 2,000 hours assured.Designed for surface mounting on high density PC board.RoHS Compliance

SPECIFICATIONS

Items Performance Operating Temperature Range -40°C ~ +85°C Capacitance Tolerance ±20°% (at 120Hz,20°C) 4~10Ø I=0.01CV or 3μA,whichever is greater,after 2 minutes at +20°C 6.3~100V Leakage Current (at 20°C) 12.5~16Ø I=0.03CV or 4μA,whichever is greater,after 2 minutes at +20°C 160~450V 12.5~16Ø I=0.04CV+100μA after 5 minutes at+20°C Where I = leakage current C=rated capacitance in μF. V=rated DC working voltage in V. Rated Voltage 6.3 10 16 25 35 50 63 100 160~250 400~450 Dissipation Factor 4~10φ 0.45 0.35 0.28 0.18 0.16 0.14 0.12 0.12 - - (Tan δ at 120Hz, 20°C) 12.5~16φ 0.40 0.38 0.34 0.26 0.22 0.18 0.14 0.10 0.20 0.25 When the capacitance exceeds 1,000μF ,0.02 shall be added every 1,000μF increase. Impedance ratio shall not exceed the values given in the table below. Rated Voltage 6.3 10 16 25 35 50 63 100 160~250 400~450 Low Temperature Z(-25°C) 4~10Ø43222223- - Characteristics (ar 120Hz) Impedance /Z(+20°C) 12.5~16Ø5432222236Ratio Z(-40°C) 4~10Ø 128643334- - /Z(+20°C) 12.5~16Ø 108643333610 Test Time 2,000 Hrs 4~6.3Ø : Within ±25% of initial value Capacitance Change 8~16Ø : Within ±20% of initial value Load Life Test Dissipation Factor Less than 200% 0f specified value Leakage Current Within specified value *The above specifications shall be satisfied when the capacitors are restored to 20°C after the rated voltage applied for 2,000 hrs at 105°C. Shelf Life Test Test time: 1,000 hrs; other items are the same as those for the load life test Other Standards JIS C 5101-1,-18

LEAD SPACING AND DIAMETER Unit:mm DIAGRAM OF DIMENSIONS

ØDLABCWP±0.2 Fig.No. 4 5.7±0.3 4.3 4.3 2.0 0.5 to 0.8 1.0155.7±0.3 5.3 5.3 2.3 0.5 to 0.8 1.5 1 6.3 5.7±0.3 6.6 6.6 2.7 0.5 to 0.8 2.0 1 6.3 7.7±0.3 6.6 6.6 2.7 0.5 to 0.8 2.01810±0.5 8.4 8.4 3.0 0.7 to 1.1 3.11810.3±0.5 8.4 8.4 3.0 0.7 to 1.1 3.1 1 10 10±0.5 10.4 10.4 3.3 0.7 to 1.1 4.7 1 10 10.3±0.5 10.4 10.4 3.3 0.7 to 1.1 4.7 1 12.5 13.5±0.5 12.8 12.8 4.9 1.1 to 1.4 4.2 2 12.5 16±0.5 12.8 12.8 4.9 1.1 to 1.4 4.2 2 16 16.5±0.5 16.3 16.3 5.8 1.1 to 1.4 6.0 2, SMD ALUMINUM ELECTROLYTIC CAPACITORS 73

GA Dimension: ØDxL(mm) DIMENSION & PERMISSIBLE RIPPLE CURRENT Ripple Current: mA/rms at 120 Hz,85°C V .DC 6.3V(0J) 10V(1A) 16V(1C) 25V(1E) 35V(1V) 50V(1H) 63V(1J)

µF Content Ø DxL mA Ø DxL mA Ø DxL mA Ø DxL mA Ø DxL mA Ø DxL mA Ø DxL mA 0.1 0R1 4x5.7 2 0.22 R22 4x5.7 3 0.33 R33 4x5.7 4 0.47 R47 4x5.7 5 4x5.751010 4x5.7 10 4x5.7 8 2.2 2R2 4x5.7 16 4x5.7 12 3.3 3R3 4x5.7 18 5x5.7 17 4.7 4R7 4x5.7 13 4x5.7 16 5x5.7 20 6.3x5.7 22 10 100 4x5.7 17 5x5.7 23 5x5.7 27 6.3x5.7 32 6.3x5.7 32 22 220 5x5.7 30 6.3x5.7 38 6.3x5.7 44 6.3x5.7 47 6.3x7.7 58 33 330 5x5.7 30 6.3x5.7 45 6.3x5.7 50 6.3x5.7 54 6.3x7.7 65 8x10 140 8x10 170 47 470 5x5.7 30 6.3x5.7 48 6.3x5.7 48 6.35.7 60 6.3x7.7 80 6.3x7.7 80 10x10 310 8x10 230 100 101 6.3x5.7 69 6.3x5.7 69 6.3x5.7 69 6.3x7.7 100 8x10 320 10x10.3 310 10x10 375 220 221 6.3x7.7 120 6.3x7.7 120 6.3x7.7 120 8x10 320 10x10 375 10x10.3 375 12.5x13.5 470 330 331 8x10 290 8x10 290 8x10 290 10x10 375 10x10.3 410 12.5x13.5 500 16x16.5 700 8x10 320 470 471 8x10 320 8x10 320 10x10 410 12.5x13.5 520 12.5x16 550 16x16.5 700 10x10 410 1000 102 10x10 410 10x10.3 410 12.5x13.5 550 12.5x16 550 16x16.5 750 2200 222 12.5x13.5 680 12.5x16 750 16x16.5 950 16x16.5 820 3300 332 12.5x16 850 16x16.5 1000 16x16.5 950 4700 472 16x16.5 1,000 16x16.5 1000 6800 682 16x16.5 1,000

V.DC 100V(2A) 160V(2C) 200V(2D) 250V(2E) 400V(2G) 450V(2W)

µF Content Ø DxL mA Ø DxL mA Ø DxL mA Ø DxL mA Ø DxL mA Ø DxL mA 3.3 3R3 12.5x13.5 65 12.5x13.5 40 4.7 4R7 12.5x13.5 68 12.5x13.5 50 12.5x13.5 50 10 100 12.5x13.5 80 12.5x13.5 72 12.5x13.5 65 12.5x16 55 22 220 8x10 100 12.5x13.5 90 12.5x13.5 90 16x16.5 85 16x16.5 85 33 330 10x10 150 12.5x13.5 95 12.5x16 110 16x16.5 180 47 470 12.5x13.5 250 12.5x16 110 16x16.5 220 16x16.5 180 100 101 12.5x13.5 380 16x16.5 190 220 221 16x16.5 450,

EJ EJSeries SMD ALUMINUM ELECTROLYTIC CAPACITORS FEATURES

. 4~10Ø,105°C, 2,000 hours assured.Designed for surface mounting on high density PC board.RoHS Compliance

SPECIFICATIONS

Items Performance Operating Temperature Range -55°C ~ +105°C Capacitance Tolerance ±20°% (at 120Hz,20°C) Leakage Current (at 20°C) I=0.01CV or 3(μA), whichever is greater (after 2 minutes) Where, C=rated capacitance in μF. V=rated DC working voltage in V. Dissipation Factor Rated Voltage 6.3 10 16 25 35 50 63 100 (Tanδat 120Hz, 20°C) 4 - 6.3Ø 0.32 0.28 0.24 0.18 0.15 0.14 - -8 - 10Ø 0.30 0.26 0.22 0.16 0.13 0.12 0.11 0.10 Impedance ratio shall not exceed the values given in the table below. Low Temperature Rated Voltage 6.3 10 16 25 35 50 63 100 Characteristics (ar 120Hz) Impedance Z(-25°C)Z(+20°C) 43222222Ratio Z(-40°C)Z(+20°C) 85433333Test Time 2,000 Hrs 6.3V Within ±30% of initial value Capacitance Change 10 ~ 16V Within ±25% of initial value 25 ~100V Within ±20% of initial value Load Life Test Dissipation Factor 6.3V ~16V Less than 300% 0f specified value25 ~ 100V Less than 200% 0f specified value Leakage Current Within specified value *The above specifications shall be satisfied when the capacitors are restored to 20°C after the rated voltage applied for 2,000 hrs at 105°C. Shelf Life Test Test time: 1,000 hrs; other items are the same as those for the load life test V.DC (V) Freg. (Hz) 50, 60 120 1K 10K up Ripple Current & Under 16 0.8 1.0 1.15 1.25 Frequency Multipliers 25 ~ 35 0.8 1.0 1.25 1.40 50 ~ 63 0.8 1.0 1.35 1.50 100 0.7 1.0 1.35 1.50 Standards JIS C 5101-1,-18

LEAD SPACING AND DIAMETER Unit:mm DIAGRAM OF DIMENSIONS

ØDLABCWP±0.2 4 5.7±0.3 4.3 4.3 2.0 0.5 to 0.8 1.0 5 5.7±0.3 5.3 5.3 2.3 0.5 to 0.8 1.5 6.3 5.7±0.3 6.3 6.3 2.7 0.5 to 0.8 2.0 8 6.5±0.3 8.4 8.4 3.4 0.5 to 0.8 2.3 8 10±0.5 8.4 8.4 3.0 0.7 to 1.1 3.1 8 10.3±0.5 8.4 8.4 3.0 0.7 to 1.1 3.1 10 10±0.5 10.4 10.4 3.3 0.7 to 1.1 4.7 10 10.3±0.5 10.4 10.4 3.3 0.7 to 1.1 4.7 Dimension: ØDxL(mm)

DIMENSION & PERMISSIBLE RIPPLE CURRENT Ripple Current: mA/rms at 120 Hz, 105°C

V.DC 6.3V(0J) 10V(1A) 16V(1C) 25V(1E) 35V(1V) 50V(1H) 63V(1J) 100V(2A) µF Content Ø DxL mA Ø DxL mA Ø DxL mA Ø DxL mA Ø DxL mA Ø DxL mA Ø DxL mA Ø DxL mA 0.1 OR1 4x5.7 2 0.22 R22 4x5.7 3 0.33 R33 4x5.7 4 0.47 R47 4x5.751010 4x5.7 10 2.2 2R2 4x5.7 16 3.3 3R3 4x5.7 18 4.7 4R7 4x5.7 13 4x5.7 13 4x5.7 13 5x5.7 22 10 100 4x5.7 13 4x5.7 16 5x5.7 30 5x5.7 30 6.3x5.7 30 8x10 67 22 220 4x5.7 13 5x5.7 27 5x5.7 30 6.3x5.7 38 6.3x5.7 50 8x6.5 65 8x10 99 10x10 33 330 5x5.7 30 5x5.7 30 6.3x5.7 40 6.3x5.7 50 8x6.5 110 8x10 99 10x10 160 133 47 470 5x5.7 36 6.3x5.7 50 6.3x5.7 50 6.3x5.7 508x10 178 8x6.5 110 8x10 178 8x10 99 10x10 160 100 101 6.3x5.7 61 6.3x5.7 61 8x10.38x6.5 110 178 8x10 178 10x10 324 10x10 160 10x10 160 220 221 8x10 178 8x10 178 10x10 324 8x10 17810x10 324 10x10 324 330 331 8x10 178 10x10 324 10x10 324 10x10.3 324 470 471 10x10 324 10x10 324 10x10 324,

EH 75EHSeries ALUMINUM ELECTROLYTIC CAPACITORS FEATURES

. 4~10Ø, 105°C, 2,000 hours assured.Vertical chip type miniaturized.Low impedance capacitors.Designed for surface mounting on high density PC board.RoHS Compliance

SPECIFICATIONS

Items Performance Operating Temperature Range -55°C ~ +105°C Capacitance Tolerance ±20°% (at 120Hz,20°C) Leakage Current (at 20°C) I=0.01CV or 3(μA), whichever is greater (after 2 minutes) Where, C=rated capacitance in μF. V=rated DC working voltage in V. Dissipation Factor Rated Voltage 6.3 10 16 25 35 (Tan δ at 120Hz, 20°C) Tan δ(max) 0.30 0.26 0.22 0.16 0.13 Impedance ratio shall not exceed the values given in the table below. Low Temperature Rated Voltage 6.3 10 16 25 35 Characteristics (ar 120Hz) Z(-25°C)Z(+20°C) 43222Impedance Ratio Z(-40°C)Z(+20°C) 85433Test Time 2,000 Hrs Capacitance Change Within ±20% of initial value (Ø ≤6.3: ±25%) Load Life Test Dissipation Factor Less than 200% 0f specified value Leakage Current Within specified value *The above specifications shall be satisfied when the capacitors are restored to 20°C after the rated voltage applied for 2,000 hrs at 105°C. Shelf Life Test Test time: 1,000 hrs; other items are the same as those for the load life test Ripple Current & Freg. (Hz)V.DC (V) 50, 60 120 1K 10K up Frequency Multipliers 6.3 ~ 35 0.64 0.8 0.93 1.0 Other Standards JIS C 5101-1,-18

LEAD SPACING AND DIAMETER Unit:mm DIAGRAM OF DIMENSIONS

ØDLABCWP±0.2 4 5.3±0.3 4.3 4.3 2.0 0.5 to 0.8 1.0 5 5.3±0.3 5.3 5.3 2.3 0.5 to 0.8 1.5 6.3 5.3±0.3 6.3 6.3 2.7 0.5 to 0.8 2.0 8 10±0.5 8.4 8.4 3.0 0.7 to 1.1 3.1 10 10±0.5 10.4 10.4 3.3 0.7 to 1.1 4.7 10 10.3±0.5 10.4 10.4 3.3 0.7 to 1.1 4.7 Dimension: ØDxL(mm) Ripple Current: mA/rms at 100k Hz, 105°C

DIMENSION & PERMISSIBLE RIPPLE CURRENT Impedance: Ω / at 100k Hz, 20°C

V.DC 6.3V(0J) 10V(1A) 16V(1C) 25V(1E) 35V(1V) µF Content Ø DxL lmp. mA Ø DxL lmp. mA Ø DxL lmp. mA Ø DxL lmp. mA Ø DxL lmp. mA 4.7 4R7 4x5.7 3.2 65 4x5.7 3.2 65 10 100 4x5.7 3.2 65 5x5.7 1.5 110 5x5.7 1.5 110 22 220 5x5.7 1.5 110 6.3x5.7 0.85 170 6.3x5.7 0.85 170 33 330 4x5.7 3.2 65 5x5.7 1.5 110 6.3x5.7 0.85 170 6.3x5.7 0.85 170 6.3x5.7 0.85 170 47 470 5x5.7 1.5 110 6.3x5.7 0.85 170 6.3x5.7 0.85 170 6.3x5.7 0.85 170 8x10 0.45 450 100 101 6.3x5.7 0.85 170 6.3x5.7 0.85 170 8x10 0.45 450 8x10 0.45 450 8x10 0.45 450 150 151 6.3x5.7 0.85 170 6.3x5.7 0.85 170 8x10 0.45 450 8x10 0.45 450 8x10 0.45 450 8x10 0.45 450 220 221 6.3x5.7 0.85 170 8x10 0.45 450 8x10 0.45 450 10x10 0.25 670 10X10 0.25 670 330 331 8x10 0.45 450 8x10 0.45 450 8x10 0.45 450 10x10.3 0.25 670 470 471 8x10 .0.45 450 8x10 0.45 450 10x10 0.25 670 820 821 10x10 0.25 670 10x10 0.25 670 1000 102 10x10 0.25 670,

EZ EZSeries SMD ALUMINUM ELECTROLYTIC CAPACITORS FEATURES

. 4~6.3Ø, 105°C, 1,000 hours assured.Low impedance capacitors.Designed for surface mounting on high density PC board.RoHS Compliance

SPECIFICATIONS

Items Performance Operating Temperature Range -55°C ~ +105°C Capacitance Tolerance ±20°% (at 120Hz,20°C) Leakage Current (at 20°C) I=0.01CV or 3(μA), whichever is greater (after 2 minutes) Where, C=rated capacitance in μF. V=rated DC working voltage in V. Dissipation Factor Rated Voltage 6.3 10 16 25 35 50 (Tan δ at 120Hz, 20°C) Tan δ(max) 0.28 0.24 0.20 0.16 0.14 0.12 Impedance ratio shall not exceed the values given in the table below. Low Temperature Rated Voltage 6.3 10 16 25 35 50 Characteristics (ar 120Hz) Z(-25°C)Z(+20°C) 432222Impedance Ratio Z(-40°C)Z(+20°C) 854333Test Time 1,000 Hrs Capacitance Change Within ±25% of initial value Load Life Test Dissipation Factor Less than 200% 0f specified value Leakage Current Within specified value *The above specifications shall be satisfied when the capacitors are restored to 20°C after the rated voltage applied for 1,000 hrs at 105°C. Shelf Life Test Test time: 1,000 hrs; other items are the same as those for the load life test Ripple Current & Freg. (Hz)V.DC (V) 50, 60 120 1K 10K up Frequency Multipliers 6.3 ~ 50 0.64 0.8 0.93 1.0 Other Standards JIS C 5101-1,-18

LEAD SPACING AND DIAMETER Unit:mm DIAGRAM OF DIMENSIONS

ØDLABCWP±0.2 4 5.3±0.2 4.3 4.3 2.0 0.5 to 0.8 1.0 5 5.3±0.2 5.3 5.3 2.3 0.5 to 0.8 1.5 6.3 5.3±0.2 6.6 6.6 2.7 0.5 to 0.8 2.0 6.3 7.7±0.3 6.6 6.6 2.7 0.5 to 0.8 2.0 Dimension: ØDxL(mm) Ripple Current: mA/rms at 100k Hz, 105°C

DIMENSION & PERMISSIBLE RIPPLE CURRENT Impedance: Ω at 100k Hz, 20°C

V . D C 6.3V(0J) 10V(1A) 16V(1C) 25V(1E) 35V(1V) 50V(1H) µF Content Ø DxL lmp. R.C. Ø DxL lmp. R.C. Ø DxL lmp. R.C. Ø DxL lmp. R.C. Ø DxL lmp. R.C. Ø DxL lmp. R.C. 1.0 010 4x5.3 5.0 30 2.2 2R2 4x5.3 5.0 30 3.3 3R3 4x5.3 5.0 30 4.7 4R7 4x5.3 3.20 65 4x5.3 3.20 65 5x5.3 3.0 50 10 100 4x5.3 3.20 65 4x5.3 3.20 65 5x5.3 1.50 110 5x5.3 1.50 110 6.3x5.3 2.0 70 22 220 4x5.3 3.20 65 5x5.3 1.50 110 5x5.3 1.50 110 6.3x5.3 0.85 170 6.3x5.3 0.85 170 6.3x5.3 2.0 70 33 330 5x5.3 1.50 110 5x5.3 1.50 110 6.3x5.3 0.85 170 6.3x5.3 0.85 170 6.3x5.3 0.85 170 6.3x7.7 1.0 170 47 470 5x5.3 1.50 110 6.3x5.3 0.85 170 6.3x5.3 0.85 170 6.3x5.3 0.85 170 6.3x7.7 0.50 255 100 101 6.3x5.3 0.85 170 6.3x5.3 0.85 170 6.3x5.3 0.85 170 6.3x7.7 0.50 255 150 151 6.3x7.7 0.50 255 6.3x7.7 0.50 255 6.3x7.7 0.50 255 220 221 6.3x7.7 0.50 255 6.3x7.7 0.50 255 6.3x7.7 0.50 255,

ZH 77ZHSeries SMD ALUMINUM ELECTROLYTIC CAPACITORS FEATURES

. 4~ 16Ø, 105°C,2,000~5,000 hours assured .Large capacitance with ultra low impedance capacitors . Designed for surface mounting on high density PC board.RoHS Compliance

SPECIFICATIONS

Items Performance Operating Temperature 6.3~63V 80~100V Range -55°C ~ +105°C -40° ~ +105°C Capacitance Tolerance ±20% (at 120Hz,20°C) Leakage Current (at 20°C) I=0.01CV or 3μA, whichever is greater (after 2minutes) Wher, C=rated capacitance in μF. V=rated DC working voltage in V. Rated Voltage 6.3 10 16 25 35 50 63 80 100 Dissipation Factor (Tanδ at 120Hz, 20°C) Tanδ (max) 0.30 0.26 0.22 0.16 0.13 0.10 0.08 0.08 0.07 When the capacitance exceeds1,000μF ,0.02shall be added every 1,000μF increase Impedance ratio shall not exceed the values given in the table below. Rated Voltage 6.3 10 16 25 35 50 63 80 100 Low Temperature Characteristics (ar 120Hz) Impedance Z(-25°C)Z(+20°C) 432222222Ratio Z(-40°C)Z(+20°C) 854333333Test Time 2,000 Hrs for 4 ~ 6.3Ø 5,000 Hrs for 8 ~ -16Ø Capacitance Change Within ± 30% of initial value Load Life Test Dissipation Factor Less than 300% 0f specified value Leakage Current Within specified value * The above specifications shall be satisfied when the capacitors are restored to 20°C after the rated voltage applied for 2,000 ~ 5,000 hrs at 105°C. Shelf Life Test Test time: 1,000 hrs; other items are the same as those for the load life test Freg. (Hz) Ripple Current & V.dc (V) 50, 60 120 1K 10K up Frequency Multipliers 6.3~100 0.64 0.8 0.93 1.0 Other Standards JIS C 5101-1,-18

LEAD SPACING AND DIAMETER Unit:mm DIAGRAM OF DIMENSIONS

ØDLABCWP±0.2 Fig. No. 4 5.7±0.3 4.3 4.3 2.0 0.5 to 0.8 1.0155.7±0.3 5.3 5.3 2.3 0.5 to 0.8 1.5 1 6.3 5.7±0.3 6.3 6.3 2.7 0.5 to 0.8 2.0 1 6.3 7.7±0.3 6.6 6.6 2.7 0.5 to 0.8 2.01810±0.5 8.4 8.4 3.0 0.7 to 1.1 3.11810.3±0.5 8.4 8.4 3.0 0.7 to 1.1 3.1 1 10 10±0.5 10.4 10.4 3.3 0.7 to 1.1 4.7 1 10 10.3±0.5 10.4 10.4 3.3 0.7 to 1.1 4.7 1 12.5 13.5±0.5 12.8 12.8 4.9 1.1 to 1.4 4.2 2 12.5 16±0.5 12.8 12.8 4.9 1.1 to 1.4 4.2 2 16 16.5±0.5 16.3 16.3 5.8 1.1 to 1.4 6.0 2, 78 SMD ALUMINUM ELECTROLYTIC CAPACITORS

ZH Dimension: ØDxL(mm) Ripple Current: mA/rms at 100 Hz,105°C DIMENSION & PERMISSIBLE RIPPLE CURRENT Impedance: Ω / at 100k Hz, 20°C V.DC 6.3V(0J) 10V(1A) 16V(1C) 25V(1E) 35V(1V)

µF Content Ø DxL lmp mA Ø DxL lmp mA Ø DxL lmp mA Ø DxL lmp mA Ø DxL lmp mA 4.7 4R7 4x5.7 1.35 80 10 100 4x5.7 1.35 80 4x5.7 1.35 80 5x5.7 0.80 150 22 220 4x5.7 1.35 80 4x5.7 1.35 80 5x5.7 0.80 150 5x5.7 0.80 150 6.3x5.7 0.44 230 33 330 4x5.7 1.35 80 5x5.7 0.80 150 6.3x5.7 0.44 230 6.3x5.7 0.44 230 6.3x5.7 0.44 230 47 470 5x5.7 0.80 150 6.3x5.7 0.44 230 6.3x5.7 0.44 230 6.3x5.7 0.44 230 6.3x5.7 0.44 230 100 101 6.3x5.7 0.44 230 6.3x5.7 0.44 230 6.3x5.7 0.44 230 6.3x7.7 0.36 280 8x10 0.17 450 150 151 6.3x5.7 0.44 230 6.3x5.7 0.44 230 6.3x7.7 0.36 280 8x10 0.17 450 8x10 0.17 450 220 221 6.3x7.7 0.36 280 6.3x7.7 0.36 280 6.3x7.7 0.36 280 8x10 0.17 450 10x10 0.09 670 330 331 8x10 0.17 450 8x10 0.17 450 8x10 0.17 450 8x10.3 0.17 450 12.5x13.5 0.070 820 8x10 0.17 450 470 471 8x10 0.17 450 8x10 0.17 450 10x10 0.09 670 12.5x16 0.060 950 10x10 0.09 670 680 681 8x10.3 0.17 450 10x10 0.09 670 10x10.3 0.09 670 12.5x13.5 0.070 820 12.5x16 0.060 950 1000 102 8x10.3 0.17 450 10x10 0.09 670 12.5x13.5 0.070 820 12.5x16 0.060 950 16x16.5 0.054 1,260 1500 152 10x10.3 0.09 670 12.5x13.5 0.070 820 12.5x16 0.060 950 16x16.5 0.054 1,260 2200 222 12.5x13.5 0.070 820 12.5x16 0.060 950 16x16.5 0.054 1,260 16x16.5 0.054 1,260 3300 332 12.5x16 0.060 950 16x16.5 0.054 1,260 16x16.5 0.054 1,260 4700 472 16x16.5 0.054 1,260 16x16.5 0.054 1,260

V.DC 6.3V(0J) 10V(1A) 16V(1C) 25V(1E)

µF Content Ø DxL lmp mA Ø DxL lmp mA Ø DxL lmp mA Ø DxL lmp mA 1 010 4x5.7 2.9 60 2.2 2R2 4x5.7 2.9 60 3.3 3R3 4x5.7 2.9 60 4.7 4R7 5x5.7 1.52 85 5x5.7 1.52 85 10 100 6.3x5.7 0.88 165 6.3x5.7 0.88 165 22 220 6.3x5.7 0.88 165 6.3x7.7 0.68 185 33 330 6.3x7.7 0.68 185 8x10 0.34 369 47 470 6.3x7.7 0.68 185 8x10 0.34 369 10x10 0.7 200 10x10 0.7 200 68 68 8x10 0.34 369 10x10 0.18 553 10x10.3 0.7 200 12.5x13.5 0.32 450 8x10 0.34 100 101 369 10x10 0.18 553 12.5x13.5 0.32 450 12.5x16 0.26 550 10x10 0.18 150 151 10x10.3 0.18 553 12.5x13.5 0.12 650 12.5x13.5 0.32 450 16x16.5 0.17 650 220 221 10x10.3 0.18 553 12.5x13.5 0.12 650 12.5x16 0.26 550 330 331 12.5x13.5 0.12 650 16x16.5 0.082 900 16x16.5 0.17 650 470 471 16x16.5 0.082 900 16x16.5 0.082 900 680 681 16x16.5 0.082 900,

UA 79UASeries SMD ALUMINUM ELECTROLYTIC CAPACITORS FEATURES

. 8~16Ø, 125°C, 1,000 hours assured.Chip type high temperature range, for +125°C use.For automobile modules and other high temperature applications.RoHS Compliance

SPECIFICATIONS

Items Performance 10 ~ 50V Operating Temperature Range -40°C ~ +125°C Capacitance Tolerance ±20°% (at 120Hz,20°C) Leakage Current (at 20°C) I=0.03CV or 4(μA), whichever is greater (after 1 minutes) Where, C=rated capacitance in μF. V=rated DC working voltage in V. Dissipation Factor Rated 10 16 25 35 50 (Tan δ at 120Hz, 20°C) Tan δ(max) 0.32 0.24 0.21 0.18 0.18 Impedance ratio shall not exceed the values given in the table below. Low Temperature Rated Voltage 10 16 25 35 50 Characteristics (ar 120Hz) Impedance Ratio Z(-25°C)Z(+20°C) 54333Test Time 1,000 Hrs Capacitance Change Within ±30% of initial value Load Life Test Dissipation Factor Less than 300% 0f specified value Leakage Current Within specified value *The above specifications shall be satisfied when the capacitors are restored to 20°C after the rated voltage applied for 1,000 hrs at 125°C. Shelf Life Test Test time: 1,000 hrs; other items are the same as those for the load life test Other Standards JIS C 5101-1,-18

DIAGRAMOFDIMENSIONSLEAD SPACING AND DIAMETER Unit:mm

ØDLABCWP±0.2 Fig. No. 8 10±0.5 8.4 8.4 3.0 0.7 to 1.1 3.1 1 10 10±0.5 10.4 10.4 3.3 0.7 to 1.1 4.7 1 12.5 13.5±0.5 12.8 12.8 4.9 1.1 to 1.4 4.2 2 12.5 16±0.5 12.8 12.8 4.9 1.1 to 1.4 4.2 2 16 16.5±0.5 16.3 16.3 5.8 1.1 to 1.4 6.0 2 Dimension: ØDxL(mm) Ripple Current: mA/rms at 100k Hz, 105°C

DIMENSION & PERMISSIBLE RIPPLE CURRENT Impedance: Ω at 100k Hz, 20°C

V.DC 10V(1A) 16V(1C) 25V(1E) 35V(1V) 50V(1H) µF Content Ø DxL mA Ø DxL mA Ø DxL mA Ø DxL mA Ø DxL mA 33 330 8x10 46 47 470 8x10 52 10x10 58 100 101 8x10 66 8x10 74 10x10 80 12.5x13.5 357 220 221 8x10 90 10x10 102 10x10 116 12.5x13.5 357 16x16.5 552 330 331 10x10 112 12.5x13.5 480 12.5x13.5 480 16x16.5 650 16x16.5 552 470 471 12.5x13.5 480 12.5x13.5 480 16x16.5 650 16x16.5 650 680 681 12.5x16 585 16.16.5 650 1000 102 12.5x16 585,

EB EBSeries SMD ALUMINUM ELECTROLYTIC CAPACITORS FEATURES

. 4~6.3Ø, 85°C, 2,000 hours assured.Vertical chip type miniaturized . Non-polar capacitors for 5.5mm high capacitors . Designed for surface mounting on high density PC board.RoHS Compliance

SPECIFICATIONS

Items Performance Operating Temperature Range -40°C ~ +85°C Capacitance Tolerance ±20°% (at 120Hz,20°C) Leakage Current (at 20°C) I=0.01CV or 3(μA), whichever is greater (after 2 minutes) Where, C=rated capacitance in μF. V=rated DC working voltage in V. Rated Voltage 6.3 10 16 25 35 50 Dissipation Factor (Tan δ at 120Hz, 20°C) Tan δ(max) 4Ø 0.35 0.30 0.25 0.25 0.25 0.25 5~6.3Ø 0.30 0.25 0.20 0.15 0.15 0.15 Impedance ratio shall not exceed the values given in the table below. Low Temperature Rated Voltage 6.3 10 16 25 35 50 Characteristics (ar 120Hz) Impedance Z(-25°C)Z(+20°C) 332222Ratio Z(-40°C)Z(+20°C) 854333Test Time 2,000 Hrs Capacitance Change Within±20% of initial value Load Life Test (with the polarity inverted Dissipation Factor Less than 200% 0f specified value every 250 hours) Leakage Current Within specified value *The above specifications shall be satisfied when the capacitors are restored to 20°C after the rated voltage applied for 2,000 hrs at 85°C. Shelf Life Test Test time: 1,000 hrs; other items are the same as those for the load life test Freg. (Hz) V.DC (V) 50 120 1K 10K up Ripple Current & Under 16 0.8 1.0 1.15 1.25 Frequency Multipliers 25~35 0.8 1.0 1.25 1.40 50 0.8 1.0 1.35 1.50 Other Standards JIS C 5101-1,-18

LEAD SPACING AND DIAMETER Unit:mm DIAGRAM OF DIMENSIONS

ØDLABCWP±0.2 4 5.3±0.2 4.3 4.3 2.0 0.5 to 0.8 1.0 5 5.3±0.2 5.3 5.3 2.3 0.5 to 0.8 1.5 6.3 5.3±0.2 6.6 6.6 2.7 0.5 to 0.8 2.0

DIMENSION & PERMISSIBLE RIPPLE CURRENT Dimension: ØDxL(mm), Ripple Current: mA/rms at 120 Hz,85°C

V.DC 6.3V(0J) 10V(1A) 16V(1C) 25V(1E) 35V(1V) 50V(1H) µF Content Ø DxL mA Ø DxL mA Ø DxL mA Ø DxL mA Ø DxL mA Ø DxL mA 0.1 0R1 4x5.3 2.3 0.22 R22 4x5.3 3.3 0.33 R33 4x5.3 4.1 0.47 R47 4x5.3 4.9 1 010 4x5.3 7.2 2.2 2R2 4x5.3 10 5x5.3 14 3.3 3R3 4x5.3 13 5x5.3 17 5x5.3 17 4.7 4R7 4x5.3 14 5x5.3 20 5x5.3 21 6.3x5.3 24 10 100 4x5.3 18 5x5.3 26 6.3x5.3 35 6.3x5.3 35 22 220 5x5.3 27 6.3x5.3 40 6.3x5.3 45 33 330 6.3x5.3 45 6.3x5.3 50 6.3x5.3 55 47 470 6.3x5.3 54,

EK 81EKSeries SMD ALUMINUM ELECTROLYTIC CAPACITORS FEATURES

. 4~10Ø, 105°C, 2,000 hours assured.Vertical chip type miniaturized . Low impedance capacitors . Designed for surface mounting on high density PC board.RoHS Compliance

SPECIFICATIONS

Items Performance Operating Temperature Range -55°C ~ +105°C Capacitance Tolerance ±20°% (at 120Hz,20°C) Leakage Current (at 20°C) I=0.01CV or 3(μA), whichever is greater (after 2 minutes) Where, C=rated capacitance in μF. V=rated DC working voltage in V. Dissipation Factor Rated Voltage 6.3 10 16 25 35 50 (Tan δ at 120Hz, 20°C) 4~6.3Ø 0.32 0.28 0.24 0.18 0.15 0.148~10Ø 0.30 0.26 0.22 0.16 0.13 0.12 Impedance ratio shall not exceed the values given in the table below. Low Temperature Rated Voltage 6.3 10 16 25 35 50 Characteristics (ar 120Hz) Impedance Z(-25°C)Z(+20°C) 432222Ratio Z(-40°C)Z(+20°C) 854333Test Time 2,000 Hrs (4~6.3Ø) 5,000 Hrs (8~10Ø) 6.3V Within ±30% of initial value Within ±30% of initial value Capacitance Change 10 ~ 16V Within ±25% of initial value Within ±30% of initial value 25 ~100V Within ±20% of initial value Within ±30% of initial value Load Life Test Dissipation 6.3V ~16V Less than 300% 0f specified value Less than 300% 0f specified value Factor 25 ~ 100V Less than 200% 0f specified value Less than 300% 0f specified value Leakage Current Within specified value Within specified value *The above specifications shall be satisfied when the capacitors are restored to 20°C after the rated voltage applied for 2,000 hrs at 105°C. Shelf Life Test Test time: 1,000 hrs; other items are the same as those for the load life test Freg. (Hz) V.DC (V) 50, 60 120 1K 10K up Ripple Current & Under 16 0.8 1.0 1.15 1.25 Frequency Multipliers 25~35 0.8 1.0 1.25 1.40 50~63 0.8 1.0 1.35 1.50 100 0.7 1.0 1.35 1.50 Other Standards JIS C 5101-1,-18

LEAD SPACING AND DIAMETER Unit:mm DIAGRAM OF DIMENSIONS

ØDLABCWP±0.2 4 5.7±0.3 4.3 4.3 2.0 0.5 to 0.8 1.0 5 5.7±0.3 5.3 5.3 2.3 0.5 to 0.8 1.5 6.3 5.7±0.3 6.3 6.3 2.7 0.5 to 0.8 2.0 8 10±0.5 8.4 8.4 3.0 0.7 to 1.1 3.1 10 10±0.5 10.4 10.4 2.3 0.7 to 1.1 4.7 Dimension: ØDxL(mm)

DIMENSION & PERMISSIBLE RIPPLE CURRENT Ripple Current: mA/rms at 120 Hz, 105°C

V.DC 6.3V(0J) 10V(1A) 16V(1C) 25V(1E) 35V(1V) 50V(1H) µF Content Ø DxL mA Ø DxL mA Ø DxL mA Ø DxL mA Ø DxL mA Ø DxL mA 0.1 0R1 4x5.7 2 0.22 R22 4x5.7 3 0.33 R33 4x5.7 4 0.47 R47 4x5.751010 4x5.7 10 2.2 2R2 4x5.7 16 3.3 3R3 4x5.7 18 4.7 4R7 4x5.7 13 4x5.7 13 4x5.7 13 5x5.7 22 10 100 4x5.7 13 4x5.7 16 4x5.7 23 5x5.7 25 6.3x5.7 30 22 220 4x5.7 13 5x5.7 30 5x5.7 30 6.3x5.7 38 6.3x5.7 50 8x10 178 33 330 5x5.7 30 5x5.7 30 6.3x5.7 40 6.3x5.7 48 8x10 178 8x10 178 47 470 5x5.7 36 6.3x5.7 43 6.3x5.7 50 8x10 178 8x10 178 8x10 178 100 101 6.3x5.7 61 8x10 178 8x10 178 8x10 178 10x10 324 10x10 160 220 221 8x10 178 8x10 178 8x10 178 8x10 240 10x10 324 330 331 8x10 178 10x10 324 10x10 324 10x10 324 470 471 10x10 324 10x10 324 10x10 324,

EC ECSeries SMD ALUMINUM ELECTROLYTIC CAPACITORS FEATURES

. 4~6.3Ø, 85°C, 2,000 hours assured.Vertical chip type miniaturized for 5.5mm, high capacitors.Low Leakage Current Lead free reflow soldering is available.Designed for surface mounting on high density PC board.RoHS Compliance

SPECIFICATIONS

Items Performance Operating Temperature Range -40°C ~ +85°C Capacitance Tolerance ±20°% (at 120Hz,20°C) Leakage Current (at 20°C) I=0.002CV or 0.5(μA), whichever is greater (after 2 minutes) Where, C=rated capacitance in μF. V=rated DC working voltage in V. Dissipation Factor Rated Voltage 6.3 10 16 25 35 50 (Tan δ at 120Hz, 20°C) Tan δ(max) 0.28 .24 0.20 0.14 0.12 0.10 Impedance ratio shall not exceed the values given in the table below. Low Temperature Rated Voltage 6.3 10 16 25 35 50 Characteristics (ar 120Hz) Impedance Z(-25°C)Z(+20°C) 332222Ratio Z(-40°C)Z(+20°C) 854333Test Time 2,000 Hrs Capacitance Change Within ±20% of initial value Load Life Test Dissipation Factor Less than 200% 0f specified value Leakage Current Within specified value *The above specifications shall be satisfied when the capacitors are restored to 20°C after the rated voltage applied for 2,000 hrs at 85°C. Shelf Life Test Test time: 1,000 hrs; other items are the same as those for the load life test Freg. (Hz) V.DC (V) 50 120 1K 10K up Ripple Current & Under 16 0.8 1.0 1.15 1.25 Frequency Multipliers 25~35 0.8 1.0 1.25 1.40 50 0.8 1.0 1.35 1.50 Other Standards JIS C 5101-1,-18

LEAD SPACING AND DIAMETER Unit:mm DIAGRAM OF DIMENSIONS

ØDLABCWP±0.2 4 5.3±0.2 4.3 4.3 2.0 0.5 to 0.8 1.0 5 5.3±0.2 5.3 5.3 2.3 0.5 to 0.8 1.5 6.3 5.3±0.2 6.6 6.6 2.7 0.5 to 0.8 2.0

DIMENSION & PERMISSIBLE RIPPLE CURRENT Dimension: ØDxL(mm), Ripple Current: mA/rms at 120 Hz,85°C

V.DC 6.3V(0J) 10V(1A) 16V(1C) 25V(1E) 35V(1V) 50V(1H) µF Content Ø DxL mA Ø DxL mA Ø DxL mA Ø DxL mA Ø DxL mA Ø DxL mA 0.1 OR1 4x5.3 3 0.22 R22 4x5.3 5 0.33 R33 4x5.3 6 0.47 R47 4x5.371010 4x5.3 10 2.2 2R2 4x5.3 15 3.3 3R3 4x5.3 19 4.7 4R7 4x5.3 19 4x5.3 20 5x5.3 26 10 100 4x5.3 23 4x5.3 26 5x5.3 32 5x5.3 34 6.3x5.3 44 22 220 4x5.3 31 5x5.3 39 5x5.3 44 6.3x5.3 55 6.3x5.3 59 33 330 5x5.3 44 5x5.3 48 6.3x5.3 63 6.3x5.3 67 47 470 5x5.3 52 6.3x5.3 67 6.3x5.3 75 100 101 6.3x5.3 89 6.3x5.3 98, ALUMINUM ELECTROLYTIC CAPACITORS 83 memo, 84 ALUMINUM ELECTROLYTIC CAPACITORS memo]
15

Similar documents

ALUMINUM ELECTROLYTIC CAPACITORS CAPACITOR SERIES TABLE
ALUMINUM ELECTROLYTIC CAPACITORS CAPACITOR SERIES TABLE Series Features Endurance Voltage Capacitance(+R=With ripple) Range(VDC) Range(μF) TEAPO LUXON CP CP 8mm height & Ultra Low 105℃,2000hours 2.5~6.3V 470-820 CG CG Ultra Low ESR 105℃,2000hours 2.5~25V 33~2700 CR CR Ultra Low ESR & Higher Ripple C
CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS
CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS
G-LUXON – Aluminium Electrolytic Capacitors
G-LUXON – Aluminium Electrolytic Capacitors Surrfface Mountt Allumiinum Ellecttrrollyttiic Capaciittorrs Aluminum Electrolytic Miiniiatturre Capacitors Allumiinum Ellecttrrollyttiic Capaciittorrs Larrge Allumiinum Ellecttrrollyttiic Capaciittorrs Solid Electrolytic Chiip Type,, wiitth conducttiing C
CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS
CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS
CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS
CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS
ALUMINUM ELECTROLYTIC CAPACITOR ALUMINUM ELECTROLYTIC CAPACITOR GAS Bi-polar Axial Leads, For Speaker use
ALUMINUM ELECTROLYTIC CAPACITOR ALUMINUM ELECTROLYTIC CAPACITOR GAS Bi-polar Axial Leads, For Speaker use • Single ended construction. • Designed specifically for speaker crossover networks application. • Test frequency at 1 KHz for D.F. & Capacitance. • Life guaranteed 1,000 hours/85°C. Acoustic pa
ALUMINUM ELECTROLYTIC CAPACITOR ALUMINUM ELECTROLYTIC CAPACITOR GBS Bi-polar Axial Leads, For Speaker use
ALUMINUM ELECTROLYTIC CAPACITOR ALUMINUM ELECTROLYTIC CAPACITOR GBS Bi-polar Axial Leads, For Speaker use • Single ended construction. • Designed specifically for speaker crossover networks application. • Test frequency at 1 KHz for D.F. & Capacitance. • Dissipation factor lower than GAS series. • L
ALUMINUM ELECTROLYTIC CAPACITOR ALUMINUM ELECTROLYTIC CAPACITOR GLA Axial Leads, Low leakage current 85°C Series
ALUMINUM ELECTROLYTIC CAPACITOR ALUMINUM ELECTROLYTIC CAPACITOR GLA Axial Leads, Low leakage current 85°C Series • Featured with low leakage current. • Suitable for timing & trigger circuits or other high reliability application. • Life guaranteed 2,000 hours/85°C. ● Specifications Item Performance
ALUMINUM ELECTROLYTIC CAPACITOR ALUMINUM ELECTROLYTIC CAPACITOR GHA Axial Leads, 105°C Standard Series
ALUMINUM ELECTROLYTIC CAPACITOR ALUMINUM ELECTROLYTIC CAPACITOR GHA Axial Leads, 105°C Standard Series • Standardized case sizes and temperature range up to 105°C. • Suitable for industrial equipments application. • Life guaranteed 2,000 hours/105°C. ● Specifications Item Performance Characteristics
GFS/GTS Bi-polar Axial Leads, For Speaker use
ALUMINUM ELECTROLYTIC CAPACITOR ALUMINUM ELECTROLYTIC CAPACITOR GFS/GTS Bi-polar Axial Leads, For Speaker use • Single ended (GFS)/Double ended sealed with rubber (GTS) for option. • Designed specifically for speaker crossover networks application. • Test frequency at 120 Hz for D.F & Capacitance. •
ALUMINUM ELECTROLYTIC CAPACITOR ALUMINUM ELECTROLYTIC CAPACITOR GWH Screw terminal, 105°C Standard series
ALUMINUM ELECTROLYTIC CAPACITOR ALUMINUM ELECTROLYTIC CAPACITOR GWH Screw terminal, 105°C Standard series • Screw terminal, working temperature range up to 105°C. • High ripple current & reliability for industrial equipments use. • Life guaranteed 2,000 hours/105°C. ● Specifications Item Performance
ALUMINUM ELECTROLYTIC CAPACITOR ALUMINUM ELECTROLYTIC CAPACITOR GVS Snap-In Type, 105°C Long Life
ALUMINUM ELECTROLYTIC CAPACITOR ALUMINUM ELECTROLYTIC CAPACITOR GVS Snap-In Type, 105°C Long Life • Snap-In terminal & extended life • High ripple current & reliability for power supply application. • Life guaranteed 5,000 hours/105°C. ● Specifications Item Performance Characteristics Operating Temp
ALUMINUM ELECTROLYTIC CAPACITOR ALUMINUM ELECTROLYTIC CAPACITOR GTA Axial Leads, 125°C Standard Series
ALUMINUM ELECTROLYTIC CAPACITOR ALUMINUM ELECTROLYTIC CAPACITOR GTA Axial Leads, 125°C Standard Series • Working temperature range up to 125°C. • Most suitable for industrial equipments where heat resistance application. • Life guaranteed : 2,000 hours 125°C. ● Specifications Item Performance Charac
ALUMINUM ELECTROLYTIC CAPACITOR ALUMINUM ELECTROLYTIC CAPACITOR GSS Bi-polar Axial Leads, For Speaker use
ALUMINUM ELECTROLYTIC CAPACITOR ALUMINUM ELECTROLYTIC CAPACITOR GSS Bi-polar Axial Leads, For Speaker use • Double ended sealed with rubber construction. • Designed specifically for speaker crossover networks application. • Test frequency at 1KHz for D.F. & Capacitance. • Dissipation factor lower th
ALUMINUM ELECTROLYTIC CAPACITOR ALUMINUM ELECTROLYTIC CAPACITOR GSA Axial Leads, 85°C Standard Series
ALUMINUM ELECTROLYTIC CAPACITOR ALUMINUM ELECTROLYTIC CAPACITOR GSA Axial Leads, 85°C Standard Series • Standardized case sizes for general purpose application. • Life guaranteed 2,000 hours/85°C. ● Specifications Item Performance Characteristics Operating Temperature range -40 + 85°C -25 + 85°C Rat
ALUMINUM ELECTROLYTIC CAPACITOR ALUMINUM ELECTROLYTIC CAPACITOR GNS Bi-polar Axial Leads, For Speaker use
ALUMINUM ELECTROLYTIC CAPACITOR ALUMINUM ELECTROLYTIC CAPACITOR GNS Bi-polar Axial Leads, For Speaker use • Double ended sealed with rubber construction. • Designed specifically for speaker crossover networks application • Test frequency at 1KHz for D.F. & Capacitance. Acoustic parts • Life guarante
ALUMINUM ELECTROLYTIC CAPACITOR ALUMINUM ELECTROLYTIC CAPACITOR GNA Non-polar standard, 85°C Axial Type
ALUMINUM ELECTROLYTIC CAPACITOR ALUMINUM ELECTROLYTIC CAPACITOR GNA Non-polar standard, 85°C Axial Type • Exhibits reliable performance in circuit where polarity reversible. • Life guaranteed 2,000 hours/85°C. ● Specifications Item Performance Characteristics Operating Temperature range -40 + 85°C R
ALUMINUM ELECTROLYTIC CAPACITOR ALUMINUM ELECTROLYTIC CAPACITOR GFZ Ultra Low Impedance series
ALUMINUM ELECTROLYTIC CAPACITOR ALUMINUM ELECTROLYTIC CAPACITOR GFZ Ultra Low Impedance series • Extremely low impedance and high ripple current, • Suitable for used in M/B and other high frequency application. • Life guaranteed 2,000 hours at 105°C ● Specifications Item Performance Characteristics
GBR Non-Polarized Radial Leads 85°C, For Horizontal Deflection Current Correction
ALUMINUM ELECTROLYTIC CAPACITOR ALUMINUM ELECTROLYTIC CAPACITOR GBR Non-Polarized Radial Leads 85°C, For Horizontal Deflection Current Correction • Designed specifically for TV’s horizontal deflection current correction use • Life guaranteed 2,000 hours/85°C. ● Specifications Item Performance Charac
ALUMINUM ELECTROLYTIC CAPACITOR ALUMINUM ELECTROLYTIC CAPACITOR PPT Axial Leads
ALUMINUM ELECTROLYTIC CAPACITOR ALUMINUM ELECTROLYTIC CAPACITOR PPT Axial Leads • Non-Inductive construction, polypropylene film/foil, axial leaded. • Continuous-duty operating temperature up to 105°C without voltage derating. • Tape-wrapped and epoxy end sealed which offers excellent humidity resis
MXP Axial Leads
ALUMINUM ELECTROLYTIC CAPACITOR ALUMINUM ELECTROLYTIC CAPACITOR MXP Axial Leads • Non-Inductive construction, metallized polypropylene fillm, axial leaded. • Operating temperature up to 105°C without derating and low ESR. • High reliable with self-healing property. • Flame-retardant tape wrapped and
ALUMINUM ELECTROLYTIC CAPACITOR ALUMINUM ELECTROLYTIC CAPACITOR MPT Axial Leads
ALUMINUM ELECTROLYTIC CAPACITOR ALUMINUM ELECTROLYTIC CAPACITOR MPT Axial Leads • Non-Inductive construction, metallized polypropylene fillm, axial leaded. • Wide range of capacitance & size reduced. • Superior performance in high frequency applications. • High reliable with self-healing property. •
ALUMINUM ELECTROLYTIC CAPACITOR ALUMINUM ELECTROLYTIC CAPACITOR MET Axial Leads
ALUMINUM ELECTROLYTIC CAPACITOR ALUMINUM ELECTROLYTIC CAPACITOR MET Axial Leads • Non-Inductive construction, compact size, metallized polyester film with axial leaded. • Tape-wrapped and epoxy end sealed which offers excellent humidity resistance & mechanical strength. • High reliable with self-hea
MER Radial Leads
ALUMINUM ELECTROLYTIC CAPACITOR ALUMINUM ELECTROLYTIC CAPACITOR MER Radial Leads • Non-Inductive construction, metallized polyester film radial leads, • Multi-layered epoxy resin enhancing performance characteristics and humidity resistance. • High reliable with self-healing property. • Minimum loss
ALUMINUM ELECTROLYTIC CAPACITOR ALUMINUM ELECTROLYTIC CAPACITOR MEA Oval Axial Leads, Low profile
ALUMINUM ELECTROLYTIC CAPACITOR ALUMINUM ELECTROLYTIC CAPACITOR MEA Oval Axial Leads, Low profile • Metallized polyester film with axial lead wires. • Non-Inductive construction & compact size in oval shape, • High reliable with self-healing property. • Minimum loss at high frequency. • Tape-wrapped
GUN 5mm Height, 85°C Non-polar Series
ALUMINUM ELECTROLYTIC CAPACITOR ALUMINUM ELECTROLYTIC CAPACITOR GUN 5mm Height, 85°C Non-polar Series • Miniature sized for Non-polar application. • Life guaranteed 1,000 hours/85°C. ● Specifications Item Performance Characteristics Operating Temperature range -40 + 85°C Rated Voltage 6.3V ∼ 50V Cap
ALUMINUM ELECTROLYTIC CAPACITOR ALUMINUM ELECTROLYTIC CAPACITOR GUL 5mm Height, 85°C, Low Leakage Current Series
ALUMINUM ELECTROLYTIC CAPACITOR ALUMINUM ELECTROLYTIC CAPACITOR GUL 5mm Height, 85°C, Low Leakage Current Series • Miniature sized and low leakage current at high reliability. • Low cost replacement for Tantalum capacitor application. • Life guaranteed 1,000 hours/85°C. ● Specifications Item Perform
ALUMINUM ELECTROLYTIC CAPACITOR ALUMINUM ELECTROLYTIC CAPACITOR GPT Aluminum solid electrolytic with conductive polymer
ALUMINUM ELECTROLYTIC CAPACITOR ALUMINUM ELECTROLYTIC CAPACITOR GPT Aluminum solid electrolytic with conductive polymer • Super low E.S.R. impedance and high heat resistance. • Suitable for DC-DC converters, voltage regulators and decoupling applications used for computer motherboards etc. ● Specifi
ALUMINUM ELECTROLYTIC CAPACITOR ALUMINUM ELECTROLYTIC CAPACITOR GPS Aluminum solid electrolytic with conductive polymer
ALUMINUM ELECTROLYTIC CAPACITOR ALUMINUM ELECTROLYTIC CAPACITOR GPS Aluminum solid electrolytic with conductive polymer • Apply conductive polymer as electrolyte. • Realized low ESR and high permissible ripple current at high frequency band. • Suitable for smoothing DC-DC converter and high frequenc
ALUMINUM ELECTROLYTIC CAPACITOR ALUMINUM ELECTROLYTIC CAPACITOR GPF Aluminum solid electrolytic with conductive polymer
ALUMINUM ELECTROLYTIC CAPACITOR ALUMINUM ELECTROLYTIC CAPACITOR GPF Aluminum solid electrolytic with conductive polymer • Super low E.S.R. impedance and high heat resistance • Suitable for DC-DC converters, voltage regulators and decoupling applications used for computer motherboards etc. ● Specific