Download: Aluminum Electrolytic Capacitors RA Features ‧ 105 , 1,000 hours assured ‧ Very low leakage current ‧ Use in high temperature industrial equipment ‧ RoHS Compliance
Aluminum Electrolytic Capacitors RA Features ‧ 105 , 1,000 hours assured ‧ Very low leakage current ‧ Use in high temperature industrial equipment ‧ RoHS Compliance Sleeve & Marking Color: Purple & Black SPECIFICATIONS Items Performance Category Temperature Range -40 ~ +105 Capacitance Tolerance 20% (at 120Hz, 20 ) I = 0.002CV or 0.4 (µA) whichever is greater (after 2 minutes) Leakage Current (at 20 ) Where, C = rated capacitance in µF V = rated DC working voltage in V Dissipation Factor Rated Voltage 6.3 10 16 25 35 50 63 100 (Tan at 120Hz, 20 ) Tan (max) 0.24 0.21 0.16 0.14 0.12 0.10 0.09 0....
Author:
Ivan Shared: 8/19/19
Downloads: 1427 Views: 4735
Content
Aluminum Electrolytic Capacitors RA Features
‧ 105 , 1,000 hours assured ‧ Very low leakage current ‧ Use in high temperature industrial equipment ‧ RoHS ComplianceSleeve & Marking Color: Purple & Black SPECIFICATIONS
Items Performance Category Temperature Range -40 ~ +105 Capacitance Tolerance 20% (at 120Hz, 20 ) I = 0.002CV or 0.4 (µA) whichever is greater (after 2 minutes) Leakage Current (at 20 ) Where, C = rated capacitance in µF V = rated DC working voltage in V Dissipation Factor Rated Voltage 6.3 10 16 25 35 50 63 100 (Tan at 120Hz, 20 ) Tan (max) 0.24 0.21 0.16 0.14 0.12 0.10 0.09 0.08 When the capacitance exceeds 1,000 µF, 0.02 shall be added every 1,000 µF increase. Impedance ratio shall not exceed the values given in the table below. Low Temperature Rated Voltage 6.3 10 16 25 35 50 63 100 Characteristics (at 120Hz) Impedance Z(-25 )/Z(+20 ) 43322222Ratio Z(-40 )/Z(+20 ) 86644333Test Time 1,000 Hrs Capacitance Change Within 20% of initial value Endurance Dissipation Factor Less than 200% of specified value Leakage Current Within specified value * The above specifications shall be satisfied when the capacitors are restored to 20 after the rated voltage applied with rated ripple current for 1,000 hours at 105 . Test Time 1,000 Hrs Capacitance Change Within 20% of initial value Shelf Life Test Dissipation Factor Less than 200% of specified value Leakage Current Within specified value * The above specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 1,000 hours at 105 without voltage applied. Freq.(Hz) 60 (50) 120 500 1k 10k up Ripple Current & Cap.(µF) Frequency Multipliers Under 100 0.75 1.00 1.35 1.55 1.90 100 C 1,000 0.83 1.00 1.23 1.32 1.45 1,000 up above 0.90 1.00 1.12 1.10 1.12 2011 V ersion,Aluminum Electrolytic Capacitors RA DIAGRAM OF DIMENSIONS Vent 6.3 L+ max D+ max LEAD SPACING AND DIAMETER Unit: mm
φD 5 6.3 8 10 12.5 16 18 P 2.0 2.5 3.5 5.0 5.0 7.5 7.5 φd 0.5 0.6 0.8 1.0 1.5 15 min 4 min 0.5 SleeveDimension: φD × L(mm) DIMENSION & PERMISSIBLE RIPPLE CURRENT Ripple Current: mA/rms at 120 Hz, 105°C
V. DC 6.3V (0J) 10V (1A) 16V (1C) 25V (1E) 35V (1V) 50V (1H) 63V (1J) 100V (2A) µF Contents φD×L mA φD×L mA φD×L mA φD×L mA φD×L mA φD×L mA φD×L mA φD×L mA 0.1 0R1 5×11 1.3 5×11 2.6 0.22 R22 5×11 2.9 5×11 5.8 0.33 R33 5×11 4.4 5×11 8 0.47 R47 5×11 7 5×11 10 1 010 5×11 13 5×11 15 2.2 2R2 5×11 20 5×11 23 3.3 3R3 5×11 25 5×11 29 4.7 4R7 5×11 26 5×11 28 5×11 30 5×11 32 5×11 34 10 100 5×11 35 5×11 38 5×11 41 5×11 46 5×11 50 6.3×11 56 22 220 5×11 49 5×11 54 5×11 57 5×11 61 5×11 68 6.3×11 82 8×11.5 96 33 330 5×11 54 5×11 60 5×11 64 5×11 69 5×11 75 6.3×11 90 6.3×11 100 10×12.5 140 47 470 5×11 65 5×11 70 5×11 99 5×11 82 6.3×11 100 6.3×11 110 8×11.5 135 10×16 180 100 101 5×11 95 5×11 105 6.3×11 125 6.3×11 135 8×11.5 170 8×11.5 180 10×12.5 225 12.5×20 320 220 221 6.3×11 160 6.3×11 175 8×11.5 215 8×11.5 230 10×12.5 300 10×16 345 10×20 400 16×25 570 330 331 6.3×11 195 8×11.5 245 8×11.5 260 10×12.5 335 10×16 400 10×20 460 12.5×20 540 16×25 700 470 471 8×11.5 270 8×11.5 290 10×12.5 370 10×16 440 10×20 520 12.5×20 610 12.5×25 700 16×31.5 880 1,000 102 10×12.5 460 10×16 550 10×20 640 12.5×20 770 12.5×25 920 16×25 1,080 16×31.5 1,210 2,200 222 12.5×20 810 12.5×20 860 12.5×25 1,000 16×25 1,170 16×31.5 1,340 18×35.5 1,530 3,300 332 12.5×20 960 12.5×25 1,100 16×25 1,300 16×31.5 1,460 18×35.5 1,650 4,700 472 16×25 1,330 16×25 1,400 16×31.5 1,600 18×35.5 1,780 18×40 1,900 2011 Ve rison dP 0.5
]15
Similar documents
Aluminum Electrolytic Capacitors RQL Features ‧ 105 , 10,000 hours assured ‧ φ10 ~ φ18 with large permissible ripple current ‧ Pen type included ‧ RoHS Compliance Sleeve & Marking Color: Black & Golden SPECIFICATIONS Items Performance Category Temperature Range 400V 420 ~ 450V -40 ~ +105 -25 ~ +105
Aluminum Electrolytic Capacitors MEQ Features Endurance with ripple current: 85 , 20,000 hours RoHS Compliance Sleeve & Marking Color: Black & Golden SPECIFICATIONS Items Performance Category Temperature Range -40 ~ +85 Capacitance Tolerance ±20% (at 120Hz, 20 ) Leakage Current (at 20 ) I =3 CV or 5
Aluminum Electrolytic Capacitors RLA Features ‧ 85 , standard low leakage current series ‧ 2,000 hours assured ‧ RoHS Compliance Sleeve & Marking Color: Orange & Black SPECIFICATIONS Items Performance Category Temperature Range -40 ~ +85 Capacitance Tolerance 20% (at 120Hz, 20 ) I = 0.002CV or 0.4 (
ALUMINUM ELECTROLYTIC CAPACITOR (CD71H HT) HT FEATURES Bi-Polar, Low DF and excellent frequency characteristics For speaker crossover net works Hi-Fi audio. SPECIFICATIONS Item Performance Characteristics Rated Working Voltage Range 50V.DC Operating Temperature Range -40°C ~+85°C Nominal Capacitance
ALUMINUM ELECTROLYTIC CAPACITOR (CD72S HA) HA FEATURES Non - polarity Ideally suited for horizontal/defluxion correction scan adjustment SPECIFICATIONS Item Performance Characteristics Rated Voltage Range 25V.DC~50V.DC Operating Temperature Range -40°C~+85°C Nominal Capacitance Range 1μF~10μF Capaci
ALUMINUM ELECTROLYTIC CAPACITOR (CD138 GT) GT FEATURES Wide temperature high frequency and ultra low impedance High reliability, Screw terminal type High ripple current Suited for smoothing circuits for general purpose inverter and control circuits for F.A machines Designed for use as input filter c
ALUMINUM ELECTROLYTIC CAPACITOR (CD137 GH) GH FEATURES High reliability, lug terminal type High ripple current Suited for smoothing circuits for general purpose inverter and control circuits for F.A machines Designed for use as input filter capacitor for current U.P.S SPECIFICATIONS Item Performance
ALUMINUM ELECTROLYTIC CAPACITOR (CD17 FW) FW FEATURES For photoflash, lead wire type, small size. Low loss factor, high stability. SPECIFICATIONS Item Performance Characteristics Rated Voltage -20°C ~+55°C Operating Temperature Range 330V Normal Capacitance Range 80 μF~300 μF Capacitance Tolerance -
ALUMINUM ELECTROLYTIC CAPACITOR (CD50 MS) MS FEATURES No lead wires chip type structure, suitable for automatic SMT and high density circuits. SPECIFICATIONS Item Performance Characteristics Rated Voltage Range 4V.DC~50V.DC Operating Temperature Range -40°C~+85°C Nominal Capacitance Range 0.1µF~220µ
SMD Aluminum Electrolytic Capacitors VZS Features ‧ 5 ~ 8φ, 105 , 2,000 hours assured ‧ Low impedance 30 ~ 50% less than VZH series ‧ Large capacitance with ultra low impedance capacitors ‧ Designed for surface mounting on high density PC board ‧ RoHS Compliance Marking color: Black SPECIFICATIONS I
SMD Aluminum Electrolytic Capacitors VZH Features ‧ 4 ~ 18φ, 105 , 2,000 ~ 5,000 hours assured ‧ Large capacitance with ultra low impedance capacitors ‧ Designed for surface mounting on high density PC board ‧ RoHS Compliance Marking color: Black SPECIFICATIONS Items Performance Category Temperature
SMD Aluminum Electrolytic Capacitors VUA Features ‧ 6.3 ~ 18φ, 125 , 1,000 ~ 2,000 hours assured ‧ Chip type high temperature range, for +125 use ‧ For automobile modules and other high temperature applications ‧ RoHS Compliance Marking color: Black SPECIFICATIONS Items Performance Category Temperat
SMD Aluminum Electrolytic Capacitors VSS Features ‧ 4 ~ 6.3φ, 85 , 2,000 hours assured ‧ Vertical chip type miniaturized for 4.5mm height capacitor ‧ Designed for surface mounting on high density PC board ‧ RoHS Compliance Marking color: Black SPECIFICATIONS Items Performance Category Temperature Ra
SMD Aluminum Electrolytic Capacitors VLW Features ‧ 12.5 ~ 16φ, 125 , 2,000 hours assured ‧ Suitable for automotive application ‧ Peak acceleration: 50G ‧ RoHS Compliance Marking color: Black SPECIFICATIONS Items Performance Category Temperature Range -40 ~ +125 Capacitance Tolerance ±20% (at 120Hz,
SMD Aluminum Electrolytic Capacitors VLV Features ‧ 12.5 ~ 16φ, 105 , 5,000 hours assured ‧ Suitable for automotive application ‧ Peak acceleration: 50G ‧ RoHS Compliance Marking color: Black SPECIFICATIONS Items Performance Category Temperature Range -55 ~ +105 Capacitance Tolerance ±20% (at 120Hz,
SMD Aluminum Electrolytic Capacitors VEZ Features ‧ 4 ~ 6.3φ, 105 , 1,000 hours assured ‧ Low ESR capacitors ‧ Designed for surface mounting on high density PC board ‧ RoHS Compliance Marking color: Black SPECIFICATIONS Items Performance Category Temperature Range -55 ~ +105 Capacitance Tolerance ±2
SMD Aluminum Electrolytic Capacitors VEU Features ‧ 4 ~ 18φ, 105 , 3,000 ~ 5,000 hours assured ‧ Long life assured ‧ Designed for surface mounting on high density PC board ‧ RoHS Compliance Marking color: Black SPECIFICATIONS Items Performance Category Temperature Range -55 ~ +105 Capacitance Tolera
SMD Aluminum Electrolytic Capacitors VEJ Features ‧ 4 ~ 18φ, 105 , 2,000 hours assured ‧ Designed for surface mounting on high density PC board ‧ RoHS Compliance Marking color: Black SPECIFICATIONS Items Performance Category Temperature Range 6.3 ~ 100V 160 ~ 450V -55 ~ +105 -40 ~ +105 Capacitance T
SMD Aluminum Electrolytic Capacitors VES Features ‧ 4 ~ 6.3φ, 105 , 1,000 hours assured ‧ Vertical chip type miniaturized for 5.5mm high capacitor ‧ Designed for surface mounting on high density PC board ‧ RoHS Compliance Marking color: Black SPECIFICATIONS Items Performance Category Temperature Ran
SMD Aluminum Electrolytic Capacitors VEH Features ‧ 4 ~ 10φ, 105 , 2,000 hours assured ‧ Vertical chip type miniaturized ‧ Low impedance capacitors ‧ Designed for surface mounting on high density PC board ‧ RoHS Compliance Marking color: Black SPECIFICATIONS Items Performance Category Temperature Ra
SMD Aluminum Electrolytic Capacitors VEC Features ‧ 4 ~ 6.3φ, 85 , 2,000 hours assured ‧ Vertical chip type miniaturized for 5.5mm, high capacitors ‧ Low Leakage Current Lead free reflow soldering is available ‧ Designed for surface mounting on high density PC board ‧ RoHS Compliance Marking color:
SMD Aluminum Electrolytic Capacitors VE Features ‧ 3 ~ 18φ, 85 , 2,000 hours assured ‧ Chip type large capacitance capacitors ‧ Designed for surface mounting on high density PC board ‧ RoHS Compliance Marking color: Black SPECIFICATIONS Items Performance Category Temperature Range -40 ~ +85 Capacita
SMD Aluminum Electrolytic Capacitors VEB Features ‧ 4 ~ 6.3φ, 85 , 2,000 hours assured ‧ Vertical chip type miniaturized ‧ Non-polar capacitors for 5.5 mm high capacitors ‧ Designed for surface mounting on high density PC board ‧ RoHS Compliance Marking color: Black SPECIFICATIONS Items Performance
Organic Conductive Polymer Capacitors OVK Features ‧ 105℃, 5,000 hours assured ‧ Ultra low ESR, solid capacitors of SMD type ‧ RoHS Compliance Marking color: Blue SPECIFICATIONS Items Performance Category Temperature Range -55℃ ~ +105℃ Capacitance Tolerance 20% (at 120Hz, 20℃) Rated voltage applied,
■FEATURES Enabled high ripple current by a reduction of impedance at high frequency range Load life:105℃ 5000~6000 hours NEW ■SPECIFICATIONS Item Characteristics Operating Temperature Range -55℃~105℃ Rated Voltage Range 6.3~35W.V. Capacitance Range 47~2700μF Capacitance Tolerance ±20%(20℃,120Hz) Lea
ALUMINUM ELECTROLYTIC CAPACITORS LLS series Load Type For Power LLS 20 Ø ■FEATURES Load Life:105℃ 2000 ~3000Hours. Substitute of Snap-in. 20Ø Radial lead type for Power Supply ■SPECIFICATIONS Item Performance Characteristics Operating Temperature Range -40℃~ +105℃(160~250V), -25℃~ +105℃(350~450V) Ra
ALUMINUM ELECTROLYTIC CAPACITORS LLRseries Load Type For Power LLR 20 Ø ■FEATURES Load Life:85℃ 2000~3000 Hours. Substitute of Snap-in. 20Ø Radial lead type for Power Supply ■SPECIFICATIONS Item Performance Characteristics Operating Temperature Range -40℃~ +85℃(200~250V), -25℃~ +85℃(350~450V) Rated
ALUMINUM ELECTROLYTIC CAPACITORS LHC series LONG LIFE 5000HRS ■FEATURES Load Life:105℃ 5000 hours High Ripple Current For Electronic Ballast, Power Supply ■SPECIFICATIONS Item Performance Characteristics Operating Temperature Range -25℃~ +105℃ Rated Voltage Range 160V~450W.V. Capacitance Range 1~220
HAX series UPGRADE Load life:125℃ 2000~5000hours. HIGH QUALITY. Low Impedance at 100KHz with selected materials. HIGH TEMPERATURE 125℃ ■SPECIFICATIONS Item Performance Characteristics Operating Temperature Range -40℃~+125℃ Rated Voltage Range 6.3~63V Capacitance Range 3.3~4700 Capacitance Tolerance
ALUMINUM ELECTROLYTIC CAPACITOR (CD117 WS / CD117H WH) WS, WH FEATURE WS is high stability, low dissipation factor, low leakage current, used in high stability circuits. WH is wide temperature range ,long life:105°C,1000 hours, high stability ,other same as CD117 SPECIFICATIONS Item Performance Char