Download: LXU series Super ULTRA .Low impedance
■FEATURES Enabled high ripple current by a reduction of impedance at high frequency range Load life:105℃ 5000~6000 hours NEW ■SPECIFICATIONS Item Characteristics Operating Temperature Range -55℃~105℃ Rated Voltage Range 6.3~35W.V. Capacitance Range 47~2700μF Capacitance Tolerance ±20%(20℃,120Hz) Leakage Current I=0.01CV or 3uA whichever is greater.(After 2 minutes) (MAX) I=Leakage Current(uA) , C=Nominal Capacitance(uF) , V=Rated Voltage(V) When nominal capacitance is over 1000uF, tan δ shall be added 0.02 to the Dissipation Factor listed value with increase of every 1000uF Rated voltage (tanδ...
Author:
Garner Shared: 8/19/19
Downloads: 465 Views: 3407
Content
■FEATURES
Enabled high ripple current by a reduction of impedance at high frequency range Load life:105℃ 5000~6000 hours NEW
■SPECIFICATIONS Item Characteristics Operating Temperature Range -55℃~105℃ Rated Voltage Range 6.3~35W.V. Capacitance Range 47~2700μF Capacitance Tolerance ±20%(20℃,120Hz) Leakage Current I=0.01CV or 3uA whichever is greater.(After 2 minutes) (MAX) I=Leakage Current(uA) , C=Nominal Capacitance(uF) , V=Rated Voltage(V) When nominal capacitance is over 1000uF, tan δ shall be added 0.02 to the Dissipation Factor listed value with increase of every 1000uF Rated voltage (tanδ) (V) 6.3 10 16 25 35 MAX Tan δ 0.22 0.19 0.16 0.14 0.12 (20℃ 120Hz) Low Temperature Stability Rated Voltage(V) 6.3 10 16 25 35 Impedance Ratio Z(-25℃)/Z(+20℃) 22222MAX Z (-55℃)/Z(+20℃) 33333(120Hz) After life test at conditions stated in the table below, the capacitors shall meet the following requirement CapacitanceChange within ±25% of the initialvalue Case Dia Life Time(hrs) Load Life Dissipation Factor Not more than 200% of thespecified value. ΦD≦6.3 5000 ΦD= 8 /10 6000 Leakage Current Not more than the specifiedvalue. After leaving capacitors under no load at 105℃ for 1000 hours and applying voltage according to JIS Shelf Life C-5102 4-3, they meet the specified value for load life characteristics listed above. Standard According to JIS C 5141 ■MULTIPLIER FOR RIPPLE CURRENT Frequency coefficient Frequency(Hz) Cap(uF) 60(50) 120 1K 10K 100K≦ 1.0~33 0.45 0.55 0.75 0.90 1.00 47~330 0.60 0.70 0.85 0.95 1.00 470~1000 0.65 0.75 0.90 0.98 1.00 1200~6800 0.75 0.80 0.95 1.00 1.00, ■DIMENSIONS (mm) φD 5 6.3 8 10 φd 0.5 0.6 F 2.0 2.5 3.5 5.0 α L≦16:α=1.5 , L≧20:α=2.0 ■STANDARD SIZE ,MAXIUM PERMISSIBLE RIPPLE CURRENT,IMPEDANCE Ripple Current (mA 105℃,100kHz) r.m.s Rated voltage 6.3V(OJ) Nominal Size ImpedanceΩ(MAX) capacitance (μF) ψDXL(mm) Ripple Current 20℃,100kHz -10℃,100kHz 220 5x11 345 0.240 0.48 330 6.3x11 450 0.175 0.35 470 6.3x11 540 0.110 0.22 680 8x11.5 750 0.085 0.17 820 8x11.5 945 0.062 0.124 1000 10x12.5 1130 0.053 0.106 1200 10x12.5 1330 0.045 0.09 1500 8x20 1500 0.033 0.066 1800 10x16 1760 0.032 0.064 2200 10x20 1960 0.020 0.04 2700 10x23 2250 0.019 0.038 Rated voltage 10V(1A) Nominal capacitance Size ImpedanceΩ(MAX) DXL(mm) Ripple Current (μF) Φ 20℃,100kHz -10℃,100kHz 150 5x11 345 0.240 0.48 220 6.3x11 450 0.175 0.35 330 6.3x11 540 0.110 0.220 470 8x11.5 740 0.086 0.172 680 8x11.5 945 0.062 0.124 820 8x11.5 1130 0.053 0.106 1000 10x12.5 1330 0.045 0.09 1200 10x12.5 1540 0.038 0.076 1500 10x16 1760 0.032 0.064 1800 10x20 1960 0.020 0.04 2200 10x23 2250 0.019 0.038,LXU series Super ULTRA .Low impedance, High Ripple Current
Rated voltage 16V(1C) capacitance Size ImpedanceΩ(MAX) (μF) ΦDXL(mm) Ripple Current 20℃,100kHz -10℃,100kHz 100 5x11 345 0.240 0.48 150 6.3x11 440 0.175 0.35 220 6.3x11 540 0.11 0.22 330 8x11.5 740 0.086 0.172 470 8x11.5 945 0.062 0.124 680 10x12.5 1330 0.045 0.09 820 10x12.5 1540 0.038 0.076 1000 10x16 1760 0.032 0.064 1200 10x16 1860 0.026 0.052 1500 10x20 1960 0.020 0.040 1800 10x25 2220 0.018 0.038 Rated voltage 25V(1E) Nominal Capacitance Size ImpedanceΩ(MAX) DXL(mm) Ripple Current (μF) Φ 20℃,100kHz -10℃,100kHz 47 5x11 250 0.300 0.600 68 5x11 345 0.240 0.48 100 6.3x11 440 0.175 0.35 150 6.3x11 540 0.110 0.220 220 8x11.5 740 0.086 0.172 330 8x11.5 945 0.062 0.124 390 8x16 1250 0.053 0.106 470 10x12.5 1330 0.045 0.090 560 8x20 1500 0.033 0.066 680 10x16 1760 0.032 0.064 820 10x20 1960 0.020 0.040 1000 10x23 2250 0.019 0.038 1200 10x23 2360 0.018 0.036, Rated voltage 35V(1V) capacitance Size ImpedanceΩ(MAX) DXL(mm) Ripple Current (μF) Φ 20℃,100kHz -10℃,100kHz 47 5x11 345 0.240 0.480 68 6.3x11 440 0.175 0.350 100 6.3x11 540 0.110 0.220 150 8x11.5 740 0.086 0.172 220 8x11.5 945 0.062 0.124 330 10x12.5 1330 0.045 0.090 390 8x20 1500 0.033 0.066 470 10x16 1760 0.032 0.064 560 10x20 1960 0.020 0.040 680 10x23 2250 0.019 0.038 820 10x23 2360 0.018 0.036]15
Similar documents
ALUMINUM ELECTROLYTIC CAPACITORS LLS series Load Type For Power LLS 20 Ø ■FEATURES Load Life:105℃ 2000 ~3000Hours. Substitute of Snap-in. 20Ø Radial lead type for Power Supply ■SPECIFICATIONS Item Performance Characteristics Operating Temperature Range -40℃~ +105℃(160~250V), -25℃~ +105℃(350~450V) Ra
ALUMINUM ELECTROLYTIC CAPACITORS LLRseries Load Type For Power LLR 20 Ø ■FEATURES Load Life:85℃ 2000~3000 Hours. Substitute of Snap-in. 20Ø Radial lead type for Power Supply ■SPECIFICATIONS Item Performance Characteristics Operating Temperature Range -40℃~ +85℃(200~250V), -25℃~ +85℃(350~450V) Rated
ALUMINUM ELECTROLYTIC CAPACITORS LHC series LONG LIFE 5000HRS ■FEATURES Load Life:105℃ 5000 hours High Ripple Current For Electronic Ballast, Power Supply ■SPECIFICATIONS Item Performance Characteristics Operating Temperature Range -25℃~ +105℃ Rated Voltage Range 160V~450W.V. Capacitance Range 1~220
HAX series UPGRADE Load life:125℃ 2000~5000hours. HIGH QUALITY. Low Impedance at 100KHz with selected materials. HIGH TEMPERATURE 125℃ ■SPECIFICATIONS Item Performance Characteristics Operating Temperature Range -40℃~+125℃ Rated Voltage Range 6.3~63V Capacitance Range 3.3~4700 Capacitance Tolerance
ALUMINUM ELECTROLYTIC CAPACITOR (CD117 WS / CD117H WH) WS, WH FEATURE WS is high stability, low dissipation factor, low leakage current, used in high stability circuits. WH is wide temperature range ,long life:105°C,1000 hours, high stability ,other same as CD117 SPECIFICATIONS Item Performance Char
ALUMINUM ELECTROLYTIC CAPACITOR (CD11X SS) SS FEATURES High temperature miniature size of radial lead type Ideally suited for high-density assembly SPECIFICATIONS Item Performance Characteristics Rated Voltage Range 6.3V.DC~50V.DC Operating Temperature Range -40°C~+105°C Nominal Capacitance Range 0.
ALUMINUM ELECTROLYTIC CAPACITOR (CD11C SC) SC FEATURES Miniature size of radial lead type, +85°C for general purpose. Ideally suited for high-density assembly SPECIFICATIONS Item Performance Characteristics Rated Voltage Range 6.3V.DC~63V.DC Operating Temperature -40°C+85°C Range Nominal Capacitance
ALUMINUM ELECTROLYTIC CAPACITOR (CD81H RT) RT FEATURES Height temperature radial lead type ФD≥8mm with top safety vent construction Ideally suited for high temperature use SPECIFICATIONS Item Performance Characteristics Rated Voltage Range 6.3V.DC~100V.DC Operating Temperature Range -55°C~+105°C Nom
ALUMINUM ELECTROLYTIC CAPACITOR (CD92 RK) RK FEATURES 125°C high temperature, high performance middle and high voltage type. φD≥8mm with top safety vent construction. Ideally suited for automobile electronic equipments, electronic ballast etc. SPECIFICATIONS Item Performance Characteristics Rated Wo
ALUMINUM ELECTROLYTIC CAPACITOR (CD71 NP) NP FEATURES Non - polarity standard for radial lead type Ideally suited for exchange polarity circuits SPECIFICATIONS Item Performance Characteristics Operating Temperature 6.3V.DC-100V.DC Range Rated Voltage Range -40°C~+85°C Nominal Capacitance Range 0.1μF
ALUMINUM ELECTROLYTIC CAPACITOR (CD82 RG) RG FEATURES 105°C high temperature, high performance middle and high voltage type. ФD≥8mm with top safety vent construction. Ideally suited for automobile electronic equipments, electronic ballast etc. SPECIFICATIONS Item Performance Characteristics Rated Wo
ALUMINUM ELECTROLYTIC CAPACITOR (CDV MV) MV FEATURES Micro miniature, 5mm height, used in high density circuits. SPECIFICATIONS Item Performance Characteristics Rated Voltage Range 4V.DC~50V.DC Operating Temperature Range -40°C~+85°C Nominal Capacitance Range 0.22μF~220μF Capacitance Tolerance ±20%(
ALUMINUM ELECTROLYTIC CAPACITOR (CD50 MS) MS FEATURES No lead wires chip type structure, suitable for automatic SMT and high density circuits. SPECIFICATIONS Item Performance Characteristics Rated Voltage Range 4V.DC~50V.DC Operating Temperature Range -40°C~+85°C Nominal Capacitance Range 0.1μF~220μ
ALUMINUM ELECTROLYTIC CAPACITOR (CDK MK) MK FEATURES Micro miniature, 5mm height, used in high density circuits. SPECIFICATIONS Item Performance Characteristics Rated Voltage Range 4V.DC~50V.DC Operating Temperature Range -40°C+105°C Nominal Capacitance Range 0.22μF~220μF Capacitance Tolerance ±20%(
ALUMINUM ELECTROLYTIC CAPACITOR (CD286 LX) LX FEATURES Wide frequency and low impedance ФD≥8mm with top safety vent construction For switching power supplies and other industrial electronic products applications SPECIFICATIONS Item Performance Characteristics Rated Voltage Range 10V.DC~100V.DC 160V.
ALUMINUM ELECTROLYTIC CAPACITOR (CD296 LT) LT FEATURES Wide temperature lone life with snap - in terminal series Top safety vent construction Ideally suited for switching power supplies, telecommunication and other electronic products SPECIFICATIONS Item Performance Characteristics Rated Working Vol
ALUMINUM ELECTROLYTIC CAPACITOR (CD289 LM) LM FEATURES Wide temperature high frequency and low impedance ФD≥8mm with top safety vent construction For switching power supplies and other industrial electronic products applications SPECIFICATIONS Item Performance Characteristics Rated Voltage Range 10V
ALUMINUM ELECTROLYTIC CAPACITOR (CD113 LL) LL FEATURES Low leakage current for radial lead type ФD≥8mm with top safety vent construction Ideally suited for high stability circuits SPECIFICATIONS Item Performance Characteristics Rated Voltage Range 6.3V.DC~100V.DC Operating Temperature Range -40°C+85
ALUMINUM ELECTROLYTIC CAPACITOR (CD295 LK) LK FEATURES General purpose with snap - in terminal series Top safety vent construction Ideally suited for switching power supplies, telecommunication and other electronic products SPECIFICATIONS Item Performance Characteristics Rated Working Voltage 10V.DC
ALUMINUM ELECTROLYTIC CAPACITOR (CD294 LH) LH FEATURES General purpose with snap - in terminal series Top safety vent construction Ideally suited for switching power supplies, telecommunication and other electronic products SPECIFICATIONS Item Performance Characteristics Rated Working Voltage Range
ALUMINUM ELECTROLYTIC CAPACITORS CD288 Series KOME HOW TO ORDER: CD288 2 100 M 500 B 6X12 Product Code Total Ch Value Tolerance Voltage Packaging Size 100=10µF M +20% 50V B Bulk 6x12 CD288 Series packaging No. of Total Character 101=100µF A AMMO packaging 221=220µF PRO-AN Electronic Co., Ltd. E-mail
ALUMINUM ELECTROLYTIC CAPACITORS CD13(Snap-in) Series KOME HOW TO ORDER: CD13 3 101 M 401 B 22X37 Product Code Total Ch Value Tolerance Voltage Packaging Size 101=100µF M +20% 400V B Bulk 22x37 CD13 Series packaging No. of Total AMMO Character 102=1000µF A packaging PRO-AN Electronic Co., Ltd. E-mai
ALUMINUM ELECTROLYTIC CAPACITORS CD11X(7mm) Series KOME HOW TO ORDER: CD11X7 2 100 M 250 B 4X7 Product Code Total Ch Value Tolerance Voltage Packaging Size 100=10µF M +20% 25V B Bulk packaging 4x7 CD11X7 Series No. of Total Character 101=100µF A AMMO packaging 221=220µF PRO-AN Electronic Co., Ltd. E
ALUMINUM ELECTROLYTIC CAPACITORS CD11X(5mm) Series KOME HOW TO ORDER: CD11X5 2 100 M 250 B 5X5 Product Code Total Ch Value Tolerance Voltage Packaging Size CD11X5 100=10µF M +20% 25V B Bulk 5x5 packaging Series No. of Total AMMO Character 101=100µF A packaging 221=220µF PRO-AN Electronic Co., Ltd. E
ALUMINUM ELECTROLYTIC CAPACITORS CD11T Series KOME HOW TO ORDER: CD11T 2 100 M 250 B 5X11 Product Code Total Ch Value Tolerance Voltage Packaging Size 100=10µF M +20% 25V B Bulk 5x11 CD11T Series packaging No. of Total Character 101=100µF A AMMO packaging 221=220µF PRO-AN Electronic Co., Ltd. E-mail
ALUMINUM ELECTROLYTIC CAPACITORS CD11L Series KOME HOW TO ORDER: CD11L 2 100 M 250 B 5X11 Product Code Total Ch Value Tolerance Voltage Packaging Size 100=10µF M +20% 25V B Bulk 5x11 CD11L Series packaging No. of Total Character 101=100µF A AMMO packaging 221=220µF PRO-AN Electronic Co., Ltd. E-mail
ALUMINUM ELECTROLYTIC CAPACITORS CD 110 Series KOME HOW TO ORDER: CD110 2 100 M 250 B 5X11 Product Code Total Ch Value Tolerance Voltage Packaging Size 100=10µF M +20% 25V B Bulk 5x11 CD110 Series packaging No. of Total Character 101=100µF A AMMO packaging 221=220µF PRO-AN Electronic Co., Ltd. E-mai
ALUMINUM ELECTROLYTIC CAPACITORS CDF FARAD Series l Our CDF series, which are so-called “Global Capacitance” are “Faraday-grade” capacitors. This series has filled the emptiness of the nation in “Faraday-grade” aluminum electrolytic capacitors. They have the characteristics of HIGH CV, LOW ESR. And
LZR series ULTRAL LOW IMPEDANCE, HIGH RELIABILITY ULTRA. Low impedance at 100kHz Load life:105℃ 4000~10000 hours HIGH QUALITY ■SPECIFICATIONS Item Performance Characteristics Operating Temperature Range -40℃~105℃ Rated Voltage Range 6.3~63W.V. Capacitance Range 6.8~18000uF Capacitance Tolerance ±20%
HIGH RIPPLE / LONG LIFE LOW IMPEDANCE NEW LXU LZD NEW -55~105℃ 6.3~35WV -55~105℃ 6.3~50WV super lower impedance high super low impedance high HAX ripple sample ripple sample(5000~6000 hrs) (2000~5000 hrs) 125℃ LXY high temperature sample -55~105℃ 6.3~50WV (2000hrs~ super lower impedance LHX 5000hrs)