Download: CROSS-SECTION CONSTRUCTION

Skywell‘s OP-CON is aluminum solid electrolytic capacitor that uses organic semiconductors as electrolytes. Organic semiconductor has a high conductivity and high-temperature stability, therefore OP-CON has an excellent performance and high reliability. The constructions of OP-CON are roughly the same as an aluminum electrolytic capacitor. CROSS-SECTION CONSTRUCTION -Material Comparison of OP-Con & Conventional Aluminum Capacitors Type Aluminum Electrolytic Capacitor OP-CON Element Construction Forming foil, separator, lead wire Forming foil, separator, lead wire Dielectric material AL2O3 AL2O...
Author: Garner Shared: 8/19/19
Downloads: 539 Views: 3300

Content

Skywell‘s OP-CON is aluminum solid electrolytic capacitor that uses organic semiconductors as electrolytes. Organic semiconductor has a high conductivity and high-temperature stability, therefore OP-CON has an excellent performance and high reliability. The constructions of OP-CON are roughly the same as an aluminum electrolytic capacitor.

CROSS-SECTION CONSTRUCTION

-Material Comparison of OP-Con & Conventional Aluminum Capacitors Type Aluminum Electrolytic Capacitor OP-CON Element Construction Forming foil, separator, lead wire Forming foil, separator, lead wire Dielectric material AL2O3 AL2O3 Electrolyte Electrolytic solution, conductivity, 3mS/cm Organic semiconductor or Conductivity Polymer Encapsulation Rubber Epoxy resin or Rubber

FEATURES

Low ESR at high frequency (100KHz ~ 1MHz) Excellent of Noise & Ripple removal capability Excellent of temperature characteristics (ESR is not dependant on temperature -55℃~+105℃) Long-life up to 10000 hours

APPLICATIONS

Smoothing circuitry of power supply for DC/DC converters IC power line noise filter for D/A, A/D converters, TTL & CPUs Digital & analog circuitry for audio & video applications Replace with large size capacitors on the circuit boards www.skywellnet.com 1, PART NUMBER SYSTEM Skywell OP-Con capacitor can be ordered by Skywell part number as follows, such as SEL06T101

SEL 06 T 101

Type Voltage Tolerance Capacitance Option SES=Standard Type 04=4.0v T=+50-10% 3-digit code 1 or 2 digits SEL=Low ESR Type 06=6.3v M=+-20% (here is 100uF) P=Polymer 10=10v K=+-10% S=Special size 16=16v C=Lead cut 20=20v PS=Polymer and Special size 25=25v SC=Special size and Lead cut ▶ 105℃, 2000hrs

SES ▶ High ripple current Standard ▶ Low impedance at high frequency.

▶ Suitable for switching power supplies , noise filter Items Performance requirements Operation temperature range -55~105℃ Rated working voltage range 6.3~25V. DC Nominal capacitance range 2.2uF~330uF㎌ Capacitance tolerance ±20%(120Hz/20℃) DC leakage current 0.02CV (uA/2min.) Dissipation factor (tanδ) Value in characteristics table E.S.R(100~300KHz) Value in characteristics table Temperature characteristics -55℃ Z/Z20℃ 1.0∼1.25 (impedance ratio, 100KHz) 105℃ Z/Z20℃ 0.75∼1.0 High-temperature load ΔC/C Within ±20% (after +105℃, 2000hrs, rated voltage tanδ 1.5 times of initial value applied, 25V applied +85℃ ) L/C Less than of initial value Moisture resistance ΔC/C Within ±10% (after +60℃, 90~95% R.H,, 1000hrs, tanδ 1.5 times of initial value no voltage) L/C Less than of initial value Reverse voltage guarantee Less than 10% of the rated voltage www.skywellnet.com 2,

Dimensions & Size Table

(numbers are in mm) - Dimensions (in mm) ΦD×L 5×6.8 6.3×6.8 6.3×9.8 8×10.5 10×10.5 Pitch 2.0±0.5 2.5±0.5 2.5±0.5 3.5±0.5 5.0±0.5 Φd 0.45 0.45 0.5 0.6 0.6 K max 0.5 0.5 0.5 0.8 0.8 G max 0.5 0.5 0.5 0.8 0.8 - Size Table

WV

CAP. 6.3V 10V 16V 20V 25V 2.2 5×6.8 3.3 5×6.8 4.7 5×6.8 6.3×6.8 6.8 5×6.8 6.3×6.8 10 5×6.8 6.3×6.8 6.3×6.8 15 5×6.8 6.3×6.8 6.3×6.8 6.3×9.8 22 6.3×6.8 6.3×6.8 8×10.5 33 6.3×6.8 6.3×9.8 8×10.5 47 6.3×6.8 6.3×9.8 6.3×9.8 8×10.5 10×10.5 68 6.3×9.8 8×10.5 8×10.5 100 6.3×9.8 8×10.5 8×10.5 10×10.5 150 8×10.5 10×10.5 220 10×10.5 330 10×10.5 www.skywellnet.com 3, - Characteristics Table

Cap. ESR Max. ripple W.V. (uF) PART No. (100~300KHz) Current (mA rms) Tan Leakage

δ (mΩ)(max) (100KHz/ 45 ) current(mA) ℃ 15 SES06M150 120 815 0.05 1.80 47 SES06M470 60 1430 0.07 5.92 6.3V 100 SES06M101 60 2200 0.07 12.60 150 SES061M51 30 2780 0.07 18.90 330 SES06M331 25 3500 0.07 41.58 10 SES10M100 150 780 0.05 1.00 47 SES10M470 60 2020 0.06 9.40 10V 68 SES10M680 60 2040 0.07 13.60 100 SES10M101 30 2680 0.07 20.00 220 SES10M221 27 36370 0.07 44.00 4.7 SES16M4R7 180 720 0.04 1.50 6.8 SES16M6R8 150 745 0.04 2.18 10 SES16M100 90 1150 0.04 3.20 15 SES16M150 90 1230 0.04 4.80 22 SES16M220 70 1320 0.06 7.04 16V 33 SES16M330 70 1370 0.06 10.56 47 SES16M470 60 1830 0.06 15.04 68 SES16M680 40 2600 0.06 21.80 100 SES16M101 30 2740 0.08 32.00 150 SES16M151 28 3260 0.09 48.00 15 SES1150M 90 1200 0.06 6.00 22 SES20M220 70 1300 0.06 8.80 33 SES20M330 70 1710 0.06 13.20 20V 47 SES20M470 40 2450 0.06 18.80 68 SES20M680 36 2600 0.06 27.20 100 SES20M101 30 3210 0.06 40.00 2.2 SES20M2R2 200 695 0.03 1.10 3.3 SES20M3R3 200 700 0.03 1.65 4.7 SES20M4R7 100 1130 0.03 2.35 6.8 SES20M6R8 100 1140 0.03 3.40 25V 10 SES20M100 90 1150 0.03 5.00 15 SES20M150 70 1650 0.04 7.50 22 SES20M220 40 2330 0.06 11.00 33 SES20M330 35 2900 0.06 16.50 47 SES20M470 35 2980 0.06 23.50 www.skywellnet.com 4, ▶ 105℃, 10000 hours

SEL Large Cap. ▶ Higher capacitance and lower ESR Low ESR ▶ Suitable for the BACK-UP capacitor and

audio equipments Items Performance requirement Operation Temperature Range -55~105℃ Rated Working Voltage Range 2.0V ~25V. DC Nominal Capacitance Range 15uF~2200uF㎌ Capacitance Tolerance ±20%, +50-10% (120Hz/20℃) DC Leakage Current 0.1CV (uA/2min.) Dissipation Factor (tanδ) Value in characteristics table E.S.R(100~300KHz) Value in characteristics table Temperature Characteristics -55℃ Z/Z20℃ 1.0~1.25 (impedance ratio, 10KHz) 105℃ Z/Z20℃ 0.75~1.0 High-Temperature Load ΔC/C Within ±20% (after 105℃, 1000hrs, rated voltage applied, tanδ 1.5 times of initial value 25V applied 85℃ ) L/C Less than of initial value Moisture resistance ΔC/C Within ±10% (after 60℃, 90~95% R.H., 1000hrs, tanδ no voltage) 1.5 times of initial value L/C Less than of initial value Reverse voltage guarantee Less than 10% of the rated voltage DIMENSIONS & SIZE TABLE (numbers are in mm) www.skywellnet.com 5, - Dimensions (in mm) ΦD×L 6.3×6.8 6.3×9.8 8×10.5 8×11.5 10×10.5 10×12.5 Pitch 2.5±0.5 2.5±0.5 3.5±0.5 3.5±0.5 5.0±0.5 5.0±0.5 Φd 0.45 0.5 0.6 0.6 0.6 0.6 K max 0.5 0.5 0.8 0.8 0.8 0.8 G max 0.5 0.5 0.8 0.8 0.8 0.8 - Size Table (ΦD×L)

WV

CAP. 2.5V 4V 6.3V 10V 16V 20V 25V 33 6.3×6.8 8×10.5 47 6.3×6.8 56 10×10.5 68 6.3×9.8 82 6.3×6.8 100 6.3×9.8 120 6.3×6.8 8×10.5 150 6.3×6.8 6.3×9.8 180 6.3×9.8 8×10.5 10×10.5 270 6.3×9.8 8×10.5 10×10.5 330 10x12.5 10x10.5 390 8×10.5 470 10×10.5 10×10.5 510 8×10.5 560 8×10.5 680 10×10.5 820 8x11.5 10×10.5 10x12.5 10x10.5 1200 10x12.5 10x10.5 1500 10x12.5 ***Below left in blank intentionally*** www.skywellnet.com 6, - Characteristics Table Cap. ESR Max. ripple W.V. (uF) Part No. (100~300Khz) Current (mA) Tan Leakage δ (mΩ)(max) (100Khz/ 45 ) Current (mA)℃ 820 SEL2R5M821 7 5600 0.07 512.5 2.5V 1500 SEL2R5M152 12 5440 0.08 750 150 SEL04M151 35 1930 0.07 60.0 270 SEL04M271 20 3160 0.08 108.0 510 SEL04T511 14 4010 0.08 202.0 4.0V 560 SEL04M561 14 4080 0.08 224.0 820 SEL04M821 12 5040 0.08 328.0 1200 SEL04M122 12 5440 0.08 960.0 1200 SEL04M122S 12 5440 0.08 960.0 120 SEL06M121 35 1930 0.07 575.6 180 SEL06M181 29 2990 0.07 113.4 390 SEL06M391 16 3810 0.08 245.7 6.3V 680 SEL06M681 13 4840 0.08 428.4 820 SEL06M821 12 5440 0.08 774.90 820 SEL06M821S 12 5440 0.08 774.90 82 SEL10M820 40 1850 0.07 82.0 150 SEL10M151 30 2990 0.07 150.0 10V 270 SEL10M271 16 3600 0.08 270.0 470 SEL10M471 15 4510 0.08 470.0 47 SEL16M470 45 1710 0.07 75.20 100 SEL16M101 25 2820 0.08 160.0 180 SEL16M181 20 3410 0.08 288.0 16V 270 SEL16M271 18 4400 0.08 432.0 330 SEL16M331 16 4720 0.08 528.0 330 SEL16M331S 16 4720 0.08 528.0 330 SEL16M331P 7 6100(105℃) 0.12 1056.0 33 SEL20M330 45 1710 0.07 66.0 68 SEL20M680 30 2580 0.08 136.0 20V 120 SEL20M121 24 3110 0.08 240.0 180 SEL20M181 20 4280 0.08 360.0 33 SEL25M330 30 2780 0.08 82.5 25V 56 SEL25M560 25 3260 0.08 140.0 Remark: SEL04M122S, SEL06M821S and SEL16M331S are special size of 10x10.5 (ΦD×L). www.skywellnet.com 7, CHARACTERISTICS NOTES: 1. Ripple Current For maximum allowable ripple current (45℃ 100KHz), See characteristics table c.f. maximum allowable ripple current at ambient temperature. Ix mA rms (+65℃) = 0.85 x Io mA rms (+45℃) Ix mA rms (+85℃) = 0.7 x Io mA rms (+45℃) Ix mA rms (+95℃) = 0.4 x Io mA rms (+45℃) Ix mA rms (+105℃) = 0.25 x Io mA rms (+45℃) Temperature Coefficient Ratio 2. Equivalent Series Resistance (ESR) At the frequency from 100KHz to 300KHz, the ESR should stay the same, for detail ESR specification, please refer to Characteristics Table. OPERATION PRECAUTIONS 1. Polarity Confirm the polarity, do not reverse the polarity when using. 2. Prohibits Circuits 1) High impedance voltage retention circuits 2) Coupling circuits 3) Time constant circuits 4) Circuits greatly affected by leakage current www.skywellnet.com 8, 3. Over Voltage Prohibited During Design 4. Sudden Charge & Discharge Restricted (for maintenance of high proof reliability) 5. Considerations When Soldering 1) Do not solder the OP-CON by submerging it in melted solder. 2) Soldering condition: less than 10 seconds at 260℃ 3) The leakage current value after soldering may increase a little depending on the soldering conditions. But the leakage current can be reduced through self-repaired by applying voltage. APPLICATION NOTES 1. Operating Temperature Use the OP-CON according to the specified operating temperature range. 2. Ripple Current Never make current larger than the permissible ripple current. 3. Leakage Current Leakage current increases slightly during high temperature no-load, damp heat load and rapid change of temperature with no voltage applied. However, leakage current will decrease by applying voltage at the maximum operating temperature in case it happened. 4. Applied Voltage For 2.5 to 20WV products and 30WV products, 100% of the rated voltage can be applied without causing any problem. Use less than 80% of the following temperature reduction voltage for 25WV products. The reliability of OP-CON, it is recommended that voltage applied to them should be lesst han 80% of the rated voltage. If the 25V rating are used at the temperature higher than 85, apply the temperature reducing voltage described as: 85℃→25V, 95℃→22.5V 105℃→20V for the 2.5V to 20V rating, the reverse voltage should be less than 20% of the rating voltage for an extremely short period less than 10% for a certain continuous period. www.skywellnet.com 9, 5. Failure Mode OP-CON may end worn-out in association with temperature. They may be defected accidentally by over- voltage or over-current mainly causing short circuit. The failure rate is dependent on the applied voltage and the ambient temperature. SES and SEL series products are conformed to RoHS. Contact Skywell’s branch office nearest you or email to email is hidden if you have any question. www.skywellnet.com 10]
15

Similar documents

SCOPE This specification is for aluminum solid electrolytic capacitors with organic semiconductor. APPLICATION STANDARDS KS C 6421 (W) and KS C 6035, except as specified in this specification.
SCOPE This specification is for aluminum solid electrolytic capacitors with organic semiconductor. APPLICATION STANDARDS KS C 6421 (W) and KS C 6035, except as specified in this specification. OPERATION TEMPERATURE RANGE -55°C ~ +105°C RATED VOLTAGE, SURGE, CATEGORY VOLTAGE AND REATED TEMPERATURE Ra
SACON Electrolytic capacitors
SACON Electrolytic capacitors FZ series For VGA Power Supply Circuits. **Long Life:D8~D10≧2000hours **Ultra Low Impedance, Higer Ripple Current **Dimensions φD 8 10 13 P 3.5 5.0 5.0 L+1.5 20 φd 0.5 0.6 0.6 For dimensions of φD & L, refer to the table 1 SACON 16v 105℃ 470uF FZ504 Nominal capacitance
ALUMINUM ELECTROLYTIC CAPACITORS
ALUMINUM ELECTROLYTIC CAPACITORS CD81(105’C) Series KOME HOW TO ORDER: CD81 2 100 M 250 B 5X11 Product Code Total Ch Value Tolerance Voltage Packaging Size 100=10µF M +20% 25V B Bulk 5x11 CD81 Series packaging No. of Total Character 101=100µF A AMMO packaging 221=220µF PRO-AN Electronic Co., Ltd. E-
ALUMINUM ELECTROLYTIC CAPACITORS
ALUMINUM ELECTROLYTIC CAPACITORS CD71(NP) Series KOME HOW TO ORDER: CD71 2 100 M 250 B 5X11 Product Code Total Ch Value Tolerance Voltage Packaging Size 100=10µF M +20% 25V B Bulk 5x11 CD 71 Series packaging No. of Total Character 101=100µF A AMMO packaging 221=220µF PRO-AN Electronic Co., Ltd. E-ma
ALUMINUM ELECTROLYTIC CAPACITORS
ALUMINUM ELECTROLYTIC CAPACITORS CD60A Series for A.C. motors KOME HOW TO ORDER: CD60 3 101 M 161 B 34X80 Product Code Total Ch Value Tolerance Voltage Packaging Size 101=100µF M +20% 160V B Bulk 34x80 CD60 Series packaging No. of Total AMMO Character 102=1000µF A packaging PRO-AN Electronic Co., Lt
SURFACE MOUNT ALUMINUM ELECTROLYTIC DV Long Life Series
SURFACE MOUNT ALUMINUM ELECTROLYTIC DV Long Life Series ●Features : 105℃ 2000 hours , Longer life than SV, Low profile vertical chip ●Recommended Applications: Suitable for AV(TV,Video,Audio),Monitor/Computer, OA/HA/Communication ●Corresponding product to RoHS ■ Specifications Item Characteristics O
D7 7mm/9mm heightSeries
ALUMINUM ELECTROLYTIC CAPACITORS D7 7mm/9mm heightSeries ■ Features: 85℃,1000hrs, Low profile/Miniature, 7mm/9mm height S7 ■ Recommended Applications: AV(TV, Video, Audio), Monitor/Computer, High Temperature OA/HA/Communication, Small signal D7 ■Corresponding product to RoHS ■ Specifications Item Ch
D5 5mm heightSeries
ALUMINUM ELECTROLYTIC CAPACITORS D5 5mm heightSeries ■ Features : 85℃,1000hrs, Low profile/Ultra Miniature, 5mm height S5 ■ Recommended Applications : AV(TV, Video, Audio), Monitor/Computer, High Temperature OA/HA/Communication, Small signal D5 ■Corresponding product to RoHS ■ Specifications Item Ch
CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS CZ Small Size & Low ESR Series
CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS CZ Small Size & Low ESR Series ■ Features: 105℃,2000hrs, Low ESR ■ Recommended Applications: Used switching requlator applications in computer. Especially for high frequency. ■ Corresponding product to RoHS ■ Specifications Item Characteristics Category T
CY Large capacitance Series
CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS CY Large capacitance Series ■ Features: 105℃,2000hrs, Low ESR & large capacitance ■ Recommended Applications: Used switching requlator applications in computer. Especially for high frequency. ■ Specifications Item Characteristics Category Temperature Rang
CX Large capacitance Series
CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS CX Large capacitance Series ■ Features: 105℃,2000hrs, Low ESR & large capacitance ■ Recommended Applications: Used switching requlator applications in computer. Especially for high frequency. ■ Specifications Item Characteristics Category Temperature Rang
CV Low Leakage Series
SURFACE MOUNT ALUMINUM ELECTROLYTIC CV Low Leakage Series ●Features : 85℃ 2000 hours , Low profile vertical chip, Low Leakage current ( 0.5μA to 2.0μA max.) ●Recommended Applications: Security System , Backup Battery ●Corresponding product to RoHS ■ Specifications Item Characteristics Operating Temp
CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS CT 125℃ 1000hrs / 105℃ 5000hrs & Low ESRSeries ■ Specifications
CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS CT 125℃ 1000hrs / 105℃ 5000hrs & Low ESRSeries ■ Features: 125℃,1000hrs & 105℃,5000hrs,Low ESR ■ Recommended Applications: Motherboard, DC/DC Converter ,Adapter , SPS ,VCR , Camcorder , DSC , PDA, HD Drive , MO Drive , DVD Drive, Navigation system,Portabl
UK series
Aluminum Electrolytic Capacitors su'scon UK series • 10SoC high-temperature resistance, high ripple current resistance. • Long life: 3000hours. Standard Product, for general purposes. • RoHS Compliance. • 1es-c iIiM~)~ , iIiM~~).81 ' ~;:;ifrJ (3000/J\B~)~~ , e~m~ ° SPECIFICATIONS Items r~§ Character
CP 8 mm height & Ultra low ESR Series
CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS CP 8 mm height & Ultra low ESR Series ■ Features: 105℃,3000hrs, 8mm height & Ultra Low ESR ■ Recommended Applications: Motherboard, DC/DC Converter , Adapter , SPS ,VCR , camcorder , DSC , PDA, HD Drive , MO Drive , DVD Drive, Navigation system, Portable
CH Long life & Ultra low ESR Series
CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS CH Long life & Ultra low ESR Series ■ Features: 105℃,5000hrs, Ultra Low ESR ■ Recommended Applications: Motherboard, DC/DC Converter , Adapter , SPS ,VCR , camcorder , DSC , PDA, HD Drive , MO Drive , DVD Drive, Navigation system, Portable Communication D
SJ series
Aluminum Electrolytic Capacitors su'scon SJ series • Enabled high ripple current Ultra low impedance at high frequency range. • For computer motherboard. • RoHS Compliance. • iIffit~~;&:~5nt ' ~!m~1t\;~.El.m ° • ~f.m~DI/ll±f&~~t ° SPECIFICATIONS Items ~§l Characteristics ~ I~ Capacitance Tolerance ±
■ Specifications
■ Features: 105℃,2000hrs, Ultra Low ESR ■ Recommended Applications: Motherboard, DC/DC Converter , Adapter , SPS ,VCR , camcorder , DSC , PDA, HD Drive ,MO Drive , DVD Drive, Navigation system,Portable Communication Devices ■ Corresponding product to RoHS ■ Specifications Item Characteristics Catego
CF Large capacitance Series
CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS CF Large capacitance Series ■ Features: 105℃,2000hrs, Super Low ESR & large capacitance ■ Recommended Applications: Motherboard, DC/DC Converter , Adapter , SPS ,VCR , camcorder , DSC , PDA, HD Drive , MO Drive , DVD Drive, Navigation system, Portable Com
51 series
Aluminum Electrolytic Capacitors su'scon 51 series • Enabled high ripple current Ultra low impedance at high frequency range. r~- -I ,. Su'scon Su ·~ • For computer motherboard. I 1500.uF 1,50 • RoHS Compliance. t~·~ .1~ • iID!t~~5&:~)Jit ' ~!m~1tUEl.1Jj; ° • wf.i9~D~~~~~t ° SPECIFICATIONS Items r~§
SG series
Aluminum Electrolytic Capacitors SG series • Enabled high ripple current lower impedance at high frequency range. • Long life. • RoHS Compliance. • m~*)()Bl~)tit ' ~1tt~.I3.1Ji;)J~~!m ° .~;:;ifrJ~o SPECIFICATIONS Items lW§ Characteristics wn Capacitance Tolerance ±20% (120Hz, 20°C) Mi~@;~~~ Operatin
SH series
Aluminum Electrolytic Capacitors Su'scon SH series • High-temperature 125°, high reliability. • Long Life: 2,000 hours. • RoHS Compliance. • 125°cm~)8fl ' ~f~*~m: ° • 2,000tJI!fij , ~a$~ ° SPECIFICATIONS Items r~§ Characteristics ~ I~ Capacitance Tolerance ±20% (120Hz, 20°C) Ml~@m.~~ Operating Tempe
AK Higher temperature range & Long LifeSeries
ALUMINUM ELECTROLYTIC CAPACITORS AK Higher temperature range & Long LifeSeries ■ Features:125℃ 2000~5000hrs, High Temperature and Long Life AK ■ Recommended Applications: Higher temperature Applicable for Electronic Ballast,Lighting Ballast AH ■ Corresponding product to RoHS ■ Specifications Item Ch
BX Bi-PolarSeries
ALUMINUM ELECTROLYTIC CAPACITORS BX Bi-PolarSeries BX ■ Features: 105℃,1000hrs, Bi-polarized/Polarity reversing High Temperature ■ Recommended Applications: TV/Monitor, Horizontal deflection correction SR ■Corresponding product to RoHS ■ Specifications Item Characteristics Operating Temperature Rang
SL series
Aluminum Electrolytic Capacitors su'scon SL series • Standard product, for general purposes. • RoHS Compliance. • ~~~'iff3mffl~o SPECIFICATIONS Items r~§ Characteristics ~ I~ Capacitance Tolerance ±20% (120Hz, 20°C) ~~~ii~~ Operating Temperature Range ~m ;NilMiBII -40 - +85°C -40 - +85°C -25 - +85°C
MM series ~w~
Aluminum Electrolytic Capacitors su'scon MM series • Miniaturized low profile aC. • Load life 2,OOOhrs at 85 • RoHS Compliance. • ~~E/J\~1~~~ l I aC • 2,OOO/J\1fif 85 ~~ con Strscon $[ ~w~ SPECIFICATIONS Items r~§ Characteristics ~ I~ Capacitance Tolerance ±20% (120Hz, 20°C) ~~~.m~~ Operating Temper
ML series
Aluminum Electrolytic Capacitors su'scon ML series • One rank smaller case sizes than SL series. • RoHS Compliance. • SL /J\~H:;~ ° SPECIFICATIONS Items r~§ Characteristics ~ I~ Capacitance Tolerance ±20% (120Hz, 20°C) ~~~ii~~ Operating Temperature Range ~m5NilMiBII -40 - +85°C -40 - +85°C -25 - +85
MG series
Aluminum Electrolytic Capacitors su'scon MG series • Lower impedance at high frequency range. • Smaller case size and high ripple current. • RoHS Compliance. • ~1tt~.§jn~~!mtB~ ° • ~/J\ln~~~~Sl5~~)nt ° I I "I pn Su".scon S " 4F _.12-00 uF , ~ 1~ v-=- _~- ;:-. 1 SPECIFICATIONS Items r~§ Characteristi
MK series .O ne rank smaller case size than SK series.
Aluminum Electrolytic Capacitors SuJscon MK series .O ne rank smaller case size than SK series. • RoHS Compliance. ﹒ SK小型化晶 。 SPECIFIC"ATIONS Items J頁目 Characteristics特性Capacitance Tolerance ±20% (120Hz, 20°C) 靜電容量誤差 Operating Temperature Range -40 - +105°C -40 - +105°C -25 - +105°C 適用溫度範團 Rated Vol
MF series
Aluminum Electrolytic Capacitors su'scon MF series • Low IMP, high reliability, long life. • Suitable for switching regulator of computer, etc. • RoHS Compliance. • {tt~.§m ' ~~*fiM ' ~;;'® ° • I ~ ~ II~ffl~~ijil~~~8'SJOOIUJ~if.iH ° bn SU'sc on ~ ~F-100uF ~11 ·1 v~ '200v~~~ SPECIFICATIONS Items ~§ C