Download: SCOPE This specification is for aluminum solid electrolytic capacitors with organic semiconductor. APPLICATION STANDARDS KS C 6421 (W) and KS C 6035, except as specified in this specification.

SCOPE This specification is for aluminum solid electrolytic capacitors with organic semiconductor. APPLICATION STANDARDS KS C 6421 (W) and KS C 6035, except as specified in this specification. OPERATION TEMPERATURE RANGE -55°C ~ +105°C RATED VOLTAGE, SURGE, CATEGORY VOLTAGE AND REATED TEMPERATURE Rated voltage Rated temperature Surge Category voltage (V) (℃) (V) (V) 2.5 105 3.3 2.5 4 105 5.2 4 6.3 105 8.2 6.3 10 105 11.5 10.0 16 105 18.4 16.0 20 105 23.0 20.0 25 85 25.0 20.0 The sum of DC voltage and the peak of ripple voltage must not exceed the rated voltage. SIZES & DIMENSIONS www.skywellne...
Author: Garner Shared: 8/19/19
Downloads: 247 Views: 2008

Content

SCOPE

This specification is for aluminum solid electrolytic capacitors with organic semiconductor. APPLICATION STANDARDS KS C 6421 (W) and KS C 6035, except as specified in this specification. OPERATION TEMPERATURE RANGE -55°C ~ +105°C RATED VOLTAGE, SURGE, CATEGORY VOLTAGE AND REATED TEMPERATURE Rated voltage Rated temperature Surge Category voltage (V) (℃) (V) (V) 2.5 105 3.3 2.5 4 105 5.2 4 6.3 105 8.2 6.3 10 105 11.5 10.0 16 105 18.4 16.0 20 105 23.0 20.0 25 85 25.0 20.0 The sum of DC voltage and the peak of ripple voltage must not exceed the rated voltage. SIZES & DIMENSIONS www.skywellnet.com 1,

Table 1: (the numbers are in mm) Size Code ΦDxL W±0.2 H±0.2 C±0.2 P±0.2 R

A5 4.0x5.5 4.3 4.3 5.0 1.0 0.5~0.8 B6 5.0x6.0 5.3 5.3 6.0 1.4 0.5~0.8 C6 6.3x6.0 6.6 6.6 7.3 2.1 0.5~0.8 E7 8.0x7.0 8.3 8.3 9.0 3.2 0.5~0.8 F8 10.0x8.0 10.3 10.3 11.0 4.6 0.5~0.8 E12 8.0x12.0 8.3 8.3 9.0 3.2 0.8~1.1 F12 10.0x12.7 10.3 10.3 11.0 4.6 0.8~1.1

Table 2: Body Size vs. Capacitance (in mm) and performance characteristics

Rated Leakage Permissibl Surge Size Capacitance tan δ ESR Part Number voltage Current Ripple Current voltage Code (uF) (max.) (100kHz,mΩ) (VDC) (uA) (mA rms) (VDC) A5 SCL16M3R3 16 3.3 0.07 260 26.4 660 18.4 SCL10M4R7 10 4.7 0.08 240 23.5 670 11.5 SCL10M6R8 10 6.8 0.09 240 34.0 670 11.5 SCL10M100 10 10 0.10 220 50.0 700 11.5 SCL10M150 10 15 0.10 200 75.0 740 11.5 SCL6R3M220 6.3 22 0.12 200 69.3 740 8.2 SCL04M330 4 33 0.15 200 66.0 740 5.2 B6 SCL20M100 20 10 0.10 120 100 1,020 23.0 SCL16M150 16 15 0.10 120 120 1,020 18.4 SCL16M220 16 22 0.10 90 176 1,060 18.4 SCL10M330 10 33 0.12 70 165 1,100 11.5 SCL6R3M470 6.3 47 0.12 70 148 1,100 8.2 SCL04M390 4 39 0.12 70 78 1,100 5.2 SCL04M680 4 68 0.12 60 136 1,400 5.2 C6 SCL25M6R8 25 6.8 0.10 80 85 1,200 25.0 SCL20M220 20 22 0.10 60 88 1,450 23.0 SCL20M270 20 27 0.10 60 108 1,450 23.0 SCL16M390 16 39 0.10 50 125 1,620 18.4 SCL10M470 10 47 0.12 50 94 1,620 11.5 SCL10M560 10 56 0.12 45 112 1,700 11.5 www.skywellnet.com 2, Rated Leakage Permissibl Surge Size Capacitance tan δ ESR Part Number voltage Current Ripple Current voltage Code (uF) (max.) (100kHz,mΩ) (VDC) (uA) (mA rms) (VDC) SCL6R3M820 6.3 82 0.12 50 103 1,700 8.2 SCL6R3M101 6.3 100 0.12 40 126 1,810 8.2 SCL04M151X 4 150 0.12 40 120 1,810 5.2 E7 SCL15M100 25 10 0.10 60 125 1,500 25.0 SCL20M330 20 33 0.12 45 132 1,890 23.0 SCL20M470 20 47 0.12 45 188 1,890 23.0 SCL6R3M121 6.3 120 0.12 40 153 2,220 8.2 SCL16M560 16 56 0.12 45 179 1,890 18.4 SCL16M820 16 82 0.12 40 262 2,120 18.4 SCL10M121 10 120 0.12 35 240 2,560 11.5 SCL10M151X 10 150 0.12 35 300 2,560 11.5 SCL6R3M221X 6.3 220 0.12 35 277 2,560 8.2 SCL04M151 4 150 0.12 35 120 2,560 5.2 SCL04M331 4 330 0.12 35 264 2,560 5.2 F8 SCL25M220 25 22 0.10 50 275 2,000 25.0 SCL20M560 20 56 0.12 40 224 2,400 23.0 SCL20M680 20 68 0.12 40 272 2,400 23.0 SCL16M101 16 100 0.12 35 320 2,670 18.4 SCL16M151 16 150 0.12 30 480 3,020 18.4 SCL16M181X 16 180 0.12 30 576 3,020 18.4 SCL10M151 10 150 0.12 30 300 3,020 11.5 SCL10M271 10 270 0.12 25 540 3,700 11.5 SCL10M331X 10 330 0.12 25 660 3,700 11.5 SCL6R3M221 6.3 220 0.12 25 277 3,700 8.2 SCL6R3M331 6.3 330 0.12 25 416 3,700 8.2 SCL6R3M471X 6.3 470 0.12 25 592 3,700 8.2 SCL04M681 4 680 0.12 25 544 3,700 5.2 E12 SCL25M330 25 33 0.12 30 413 2,980 25.0 SCL20M101 20 100 0.15 24 400 3,320 23.0 www.skywellnet.com 3, Rated Leakage Permissibl Surge Size Capacitance tan δ ESR Part Number voltage Current Ripple Current voltage Code (uF) (max.) (100kHz,mΩ) (VDC) (uA) (mA rms) (VDC) SCL16M181 16 180 0.15 20 576 3,640 18.4 SCL10M331 10 330 0.15 17 660 3,950 11.5 SCL6R3M471 6.3 470 0.15 15 592 4,210 8.2 SCL04M561 4 560 0.15 13 448 4,520 5.2 SCL2R5M681 2.5 680 0.15 13 340 4,520 3.3 F12 SCL25M560 25 56 0.12 28 700 3,800 25.0 SCL20M151 20 150 0.15 20 600 4,320 23.0 SCL16M331 16 330 0.15 16 792 4,720 18.4 SCL10M561 10 560 0.15 13 840 5,230 11.5 SCL6R3M821 6.3 820 0.15 12 775 5,440 8.2 SCL04M122 4 1200 0.18 12 960 5,440 5.2 SCL2R5M152 2.5 1500 0.18 12 750 5,440 3.3 SCL2R5M272 2.5 2700 0.15 12 1350 5,070 3.3 Sizeabccode A5 1.0 6.2 1.6 B6 1.4 7.4 1.6 C6 2.1 9.1 1.6 E7 2.8 11.1 1.9 F8 4.3 13.1 1.9 E12 2.8 11.1 1.9 F12 4.3 13.1 1.9

Table 3: Recommended Land Pattern

www.skywellnet.com 4, PART NUMBERING SYSTEM Skywell SMD OP-Con Electrolytic capacitors can be ordered by the part numbers as below: For example: SCL04M122 SCL _ 04 M 122 Type Option Code Voltage Tolerance Capacitance SMD Type ** 04=4.0V M=±20% 3-digit code 2R5=2.5V here is 1200uF 6R3=6.3V 10=10V 16=16V 20=20V 25=25V **: High temperature reflow profile option code. Ex: “H” can meet single pass reflow soldering temperatures at durations of 230oC for 60 seconds. PERFORMANCE CHARACTERISTICS Test Environmental Conditions: Ambient Temperature: 20±2°C / Relative Humidity:60~70%/ Air Pressure: 86~106kPa ITEM TEST CONDITIONS SPECIFICATION Measuring Frequency: 120Hz 1. Capacitance Measuring Voltage: 0.5V rms or less Refer to Table 2 (Tolerance) DC Bias Voltage: +1.5~2.0Vdc (M: ±20%) Measuring Circuit: Equivalent Series Circuit Measuring shall be made under the same conditions as Refer to Table 2 2. Tan δ Those given for the measurement of capacitance. 3. ESR At 20°C, 100~300KHz Refer to Table 2 4. Maximum Temperature: 105°C Permissible Ripple: rms value of 100KHz sine wave AC (the sum of DC Refer to Table 2 Ripple Current voltage & peak voltage shall not exceed the rated voltage). The rated voltage shall be applied across the capacitors 5. Leakage Through a 1000 ±10Ω protective resistor. The leakage Refer to Table 2 Current current shall be measured after an electrification period of 2 minutes. www.skywellnet.com 5,

ITEM TEST CONDITIONS SPECIFICATION

Applied Voltage: see table 1. No visible damage Temperature: 15 ~ 35 °C Leakage Current≦initial Duration of Charge: 30±5 seconds specified value. 6. Surge Voltage Duration of discharge: 5 minutes & 30 seconds Capacitance Change: within Cycles times: 1000 times 15% of initial value. Tan δ≦initial specified value. Step * Step 2 and 4: Impedance ratio 1: At 20 ± 2°C, Impedance, tan δ and capacitance should be ( at 100KHz ) at -55°C and measured. +105°C should be within 0.75 to 7. High & Low 2: at -55 ± 3°C, Z -55°C/Z 20°C should be within 0.75 to 1.25 1.25 Temperature 3: Keep at 15 to 35°C for 15 minutes or more. *∆C/C 20°C: capacitance Characteristics 4: at 105 ± 2°C, Z 105°C/Z 20°C should be within 0.75 to change at 120 Hz. 1.25. * tan δ at 120Hz. 5: At 20 ± 2°C, ∆C/C : Within±5% of step 1 and tan δ should be less than or equal to the value of item 2. Temperature: 60 ± 2°C No visible damage Relative Humidity: 90% ~ 95% Leakage Current≦initial value. 8. Damp Heat Duration: 1000 ± 48 hours Capacitance Change: within (steady state) ±20% of initial value. Tan δ≦ 1.5* initial value Temperature: 105 ± 2°C No visible damage Applied Voltage: rated voltage Capacitance Change: within Duration: 2000 +72/-0 hours ±20% of initial specified 9. Load Life value. * The capacitors shall be stored under standard atmospheric Tan δ≦ 150% of initial value. conditions for 1 to 2 hours, after which measurement shall Leakage Current≦initial value. be made. Temperature: 235± 5°C At least 95% of surface of the 10. Solderability Duration: 2 ± 0.5 seconds dipped portion of terminal shall be covered with new solder. www.skywellnet.com 6,

RAPID CHANGE OF TEMPERATURE

Applied voltage: No load Cycle number: 5 CYCLES Test diagram: Fig. 1 Performance: After 5 cycles,the capacitors shall meet the following specification. Item Performance Capacitance change Within ±5% of initial capacitance Tanδ Less than or equal to the value of item 7.3 Leakage current Less than or equal to the value of item 7.5

FAILURE RATE LEVEL

0.5% / 1000 hours (Confidence level: 60%) Test conditions: Item 7.8 (Endurance) Failure criteria : Item Performance Capacitance change Greater than ±30% of initial capacitance Tanδ Greater than 3 times of the value of item 2 Leakage current Greater than 30 times of the value of item 5

VIBRATION

Frequency : 10 to 55 ㎐(1 minute interval / 10 → 55→ 10 ㎐) Amplitude : 0.75mm ( Total excursion 1.5mm) Direction : X, Y, Z (3axes) Duration : 2 hours / axial (Total 6 hours) www.skywellnet.com 7, Performance : Measured capacitance should be settled when it is within 30 miniutes before the end of the test. Also, after the test, the rate of capacitance change is within ±5% of the initial value.

RESISTANCE TO SOLDERING HEAT

Test condition (A) Solder bath method Temperture : 215±2℃ Duration : 90±1 seconds * Heat protector (t=1.6mm phenol board) (B) Soldering iron method Temperture : 400±10℃ Duration : 3+1, -0 seconds * Heat protector (t=1.6mm phenol board) Performance : After A) or B) test, the capacitors shall meet the following specification Item Performance Capacitance change Within ±10% of initial capacitance tanδ Less than or equal to 1.3 times of the value of item 2 E.S.R Less than or equal to 1.3 times of the value of item 3 Leakage current Less than or equal to the value of item 5 (C) Recommended reflow profile www.skywellnet.com 8, Peak Temp. 250°C or less 260°C or less Preheat 150°C to 180°C, 90 to 120 seconds 150°C to 180°C, 90 to 120 seconds Within 60 seconds at 200°C and higher Within 60 seconds at 200°C and higher Duration Within 50 seconds at 220°C and higher Within 50 seconds at 220°C and higher Within 40 seconds at 230°C and higher Within 40 seconds at 230°C and higher Reflow Cycle 2 times or less Only one time Remark1: All temperatures are measured on the topside of the aluminum cans and terminal surfaces. Remark2: Please contact us if reflow condition request is higher than above.

CLEANING

Concerning about HCFC, higher alcohol system, petroleum system, terpene system, water system with surface active agent and other solvents the washing way (separateness or combinations) by soak, ultrasonic wave, boil, vapor etc. is confirmed under the maker's recommendation. Please contact us if you require further details. Also, please be attentive to the following note as to some sort of solvent. Note: Please do not store capacitors in sealed container or in solvent after cleaning. immediate heating after cleaning may causes expansion and (or) shrink of sleeves.

STORAGE

Should be stored at the place where it is not humid. It also gets the no direct rays. It is within a year to keep sealing off in a plastic bag after delivering.

BODY MARKING SKYWELL SCL series and their homogeneous subcomponents are RoHS compliant. Please contact email is hidden if you have any question regarding this specifications

www.skywellnet.com 9, History of Change Rev. Effective Date Changed Contents Approve By 01 10/30/2003 New release Joon Won Chang 02 05/30/2005 Revise table 1 and table 2 Joon Won Chang 03 07/08/2005 Add reflow profile Joon Won Chang 04 08/05/2005 Revise type error on SCL04M122 Jimmy C. Duh 05 10/01/2005 Revise body marking from SCL to Lot Jimmy C. Duh 06 02/17/2006 Revise part number, add option code Jimmy C. Duh 07 04/28/2006 Revise From Uni-Con to OP-Con Jimmy C. Duh www.skywellnet.com 10]
15

Similar documents

SACON Electrolytic capacitors
SACON Electrolytic capacitors FZ series For VGA Power Supply Circuits. **Long Life:D8~D10≧2000hours **Ultra Low Impedance, Higer Ripple Current **Dimensions φD 8 10 13 P 3.5 5.0 5.0 L+1.5 20 φd 0.5 0.6 0.6 For dimensions of φD & L, refer to the table 1 SACON 16v 105℃ 470uF FZ504 Nominal capacitance
ALUMINUM ELECTROLYTIC CAPACITORS
ALUMINUM ELECTROLYTIC CAPACITORS CD81(105’C) Series KOME HOW TO ORDER: CD81 2 100 M 250 B 5X11 Product Code Total Ch Value Tolerance Voltage Packaging Size 100=10µF M +20% 25V B Bulk 5x11 CD81 Series packaging No. of Total Character 101=100µF A AMMO packaging 221=220µF PRO-AN Electronic Co., Ltd. E-
ALUMINUM ELECTROLYTIC CAPACITORS
ALUMINUM ELECTROLYTIC CAPACITORS CD71(NP) Series KOME HOW TO ORDER: CD71 2 100 M 250 B 5X11 Product Code Total Ch Value Tolerance Voltage Packaging Size 100=10µF M +20% 25V B Bulk 5x11 CD 71 Series packaging No. of Total Character 101=100µF A AMMO packaging 221=220µF PRO-AN Electronic Co., Ltd. E-ma
ALUMINUM ELECTROLYTIC CAPACITORS
ALUMINUM ELECTROLYTIC CAPACITORS CD60A Series for A.C. motors KOME HOW TO ORDER: CD60 3 101 M 161 B 34X80 Product Code Total Ch Value Tolerance Voltage Packaging Size 101=100µF M +20% 160V B Bulk 34x80 CD60 Series packaging No. of Total AMMO Character 102=1000µF A packaging PRO-AN Electronic Co., Lt
SURFACE MOUNT ALUMINUM ELECTROLYTIC DV Long Life Series
SURFACE MOUNT ALUMINUM ELECTROLYTIC DV Long Life Series ●Features : 105℃ 2000 hours , Longer life than SV, Low profile vertical chip ●Recommended Applications: Suitable for AV(TV,Video,Audio),Monitor/Computer, OA/HA/Communication ●Corresponding product to RoHS ■ Specifications Item Characteristics O
D7 7mm/9mm heightSeries
ALUMINUM ELECTROLYTIC CAPACITORS D7 7mm/9mm heightSeries ■ Features: 85℃,1000hrs, Low profile/Miniature, 7mm/9mm height S7 ■ Recommended Applications: AV(TV, Video, Audio), Monitor/Computer, High Temperature OA/HA/Communication, Small signal D7 ■Corresponding product to RoHS ■ Specifications Item Ch
D5 5mm heightSeries
ALUMINUM ELECTROLYTIC CAPACITORS D5 5mm heightSeries ■ Features : 85℃,1000hrs, Low profile/Ultra Miniature, 5mm height S5 ■ Recommended Applications : AV(TV, Video, Audio), Monitor/Computer, High Temperature OA/HA/Communication, Small signal D5 ■Corresponding product to RoHS ■ Specifications Item Ch
CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS CZ Small Size & Low ESR Series
CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS CZ Small Size & Low ESR Series ■ Features: 105℃,2000hrs, Low ESR ■ Recommended Applications: Used switching requlator applications in computer. Especially for high frequency. ■ Corresponding product to RoHS ■ Specifications Item Characteristics Category T
CY Large capacitance Series
CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS CY Large capacitance Series ■ Features: 105℃,2000hrs, Low ESR & large capacitance ■ Recommended Applications: Used switching requlator applications in computer. Especially for high frequency. ■ Specifications Item Characteristics Category Temperature Rang
CX Large capacitance Series
CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS CX Large capacitance Series ■ Features: 105℃,2000hrs, Low ESR & large capacitance ■ Recommended Applications: Used switching requlator applications in computer. Especially for high frequency. ■ Specifications Item Characteristics Category Temperature Rang
CV Low Leakage Series
SURFACE MOUNT ALUMINUM ELECTROLYTIC CV Low Leakage Series ●Features : 85℃ 2000 hours , Low profile vertical chip, Low Leakage current ( 0.5μA to 2.0μA max.) ●Recommended Applications: Security System , Backup Battery ●Corresponding product to RoHS ■ Specifications Item Characteristics Operating Temp
CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS CT 125℃ 1000hrs / 105℃ 5000hrs & Low ESRSeries ■ Specifications
CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS CT 125℃ 1000hrs / 105℃ 5000hrs & Low ESRSeries ■ Features: 125℃,1000hrs & 105℃,5000hrs,Low ESR ■ Recommended Applications: Motherboard, DC/DC Converter ,Adapter , SPS ,VCR , Camcorder , DSC , PDA, HD Drive , MO Drive , DVD Drive, Navigation system,Portabl
UK series
Aluminum Electrolytic Capacitors su'scon UK series • 10SoC high-temperature resistance, high ripple current resistance. • Long life: 3000hours. Standard Product, for general purposes. • RoHS Compliance. • 1es-c iIiM~)~ , iIiM~~).81 ' ~;:;ifrJ (3000/J\B~)~~ , e~m~ ° SPECIFICATIONS Items r~§ Character
CP 8 mm height & Ultra low ESR Series
CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS CP 8 mm height & Ultra low ESR Series ■ Features: 105℃,3000hrs, 8mm height & Ultra Low ESR ■ Recommended Applications: Motherboard, DC/DC Converter , Adapter , SPS ,VCR , camcorder , DSC , PDA, HD Drive , MO Drive , DVD Drive, Navigation system, Portable
CH Long life & Ultra low ESR Series
CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS CH Long life & Ultra low ESR Series ■ Features: 105℃,5000hrs, Ultra Low ESR ■ Recommended Applications: Motherboard, DC/DC Converter , Adapter , SPS ,VCR , camcorder , DSC , PDA, HD Drive , MO Drive , DVD Drive, Navigation system, Portable Communication D
SJ series
Aluminum Electrolytic Capacitors su'scon SJ series • Enabled high ripple current Ultra low impedance at high frequency range. • For computer motherboard. • RoHS Compliance. • iIffit~~;&:~5nt ' ~!m~1t\;~.El.m ° • ~f.m~DI/ll±f&~~t ° SPECIFICATIONS Items ~§l Characteristics ~ I~ Capacitance Tolerance ±
■ Specifications
■ Features: 105℃,2000hrs, Ultra Low ESR ■ Recommended Applications: Motherboard, DC/DC Converter , Adapter , SPS ,VCR , camcorder , DSC , PDA, HD Drive ,MO Drive , DVD Drive, Navigation system,Portable Communication Devices ■ Corresponding product to RoHS ■ Specifications Item Characteristics Catego
CF Large capacitance Series
CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS CF Large capacitance Series ■ Features: 105℃,2000hrs, Super Low ESR & large capacitance ■ Recommended Applications: Motherboard, DC/DC Converter , Adapter , SPS ,VCR , camcorder , DSC , PDA, HD Drive , MO Drive , DVD Drive, Navigation system, Portable Com
51 series
Aluminum Electrolytic Capacitors su'scon 51 series • Enabled high ripple current Ultra low impedance at high frequency range. r~- -I ,. Su'scon Su ·~ • For computer motherboard. I 1500.uF 1,50 • RoHS Compliance. t~·~ .1~ • iID!t~~5&:~)Jit ' ~!m~1tUEl.1Jj; ° • wf.i9~D~~~~~t ° SPECIFICATIONS Items r~§
SG series
Aluminum Electrolytic Capacitors SG series • Enabled high ripple current lower impedance at high frequency range. • Long life. • RoHS Compliance. • m~*)()Bl~)tit ' ~1tt~.I3.1Ji;)J~~!m ° .~;:;ifrJ~o SPECIFICATIONS Items lW§ Characteristics wn Capacitance Tolerance ±20% (120Hz, 20°C) Mi~@;~~~ Operatin
SH series
Aluminum Electrolytic Capacitors Su'scon SH series • High-temperature 125°, high reliability. • Long Life: 2,000 hours. • RoHS Compliance. • 125°cm~)8fl ' ~f~*~m: ° • 2,000tJI!fij , ~a$~ ° SPECIFICATIONS Items r~§ Characteristics ~ I~ Capacitance Tolerance ±20% (120Hz, 20°C) Ml~@m.~~ Operating Tempe
AK Higher temperature range & Long LifeSeries
ALUMINUM ELECTROLYTIC CAPACITORS AK Higher temperature range & Long LifeSeries ■ Features:125℃ 2000~5000hrs, High Temperature and Long Life AK ■ Recommended Applications: Higher temperature Applicable for Electronic Ballast,Lighting Ballast AH ■ Corresponding product to RoHS ■ Specifications Item Ch
BX Bi-PolarSeries
ALUMINUM ELECTROLYTIC CAPACITORS BX Bi-PolarSeries BX ■ Features: 105℃,1000hrs, Bi-polarized/Polarity reversing High Temperature ■ Recommended Applications: TV/Monitor, Horizontal deflection correction SR ■Corresponding product to RoHS ■ Specifications Item Characteristics Operating Temperature Rang
SL series
Aluminum Electrolytic Capacitors su'scon SL series • Standard product, for general purposes. • RoHS Compliance. • ~~~'iff3mffl~o SPECIFICATIONS Items r~§ Characteristics ~ I~ Capacitance Tolerance ±20% (120Hz, 20°C) ~~~ii~~ Operating Temperature Range ~m ;NilMiBII -40 - +85°C -40 - +85°C -25 - +85°C
MM series ~w~
Aluminum Electrolytic Capacitors su'scon MM series • Miniaturized low profile aC. • Load life 2,OOOhrs at 85 • RoHS Compliance. • ~~E/J\~1~~~ l I aC • 2,OOO/J\1fif 85 ~~ con Strscon $[ ~w~ SPECIFICATIONS Items r~§ Characteristics ~ I~ Capacitance Tolerance ±20% (120Hz, 20°C) ~~~.m~~ Operating Temper
ML series
Aluminum Electrolytic Capacitors su'scon ML series • One rank smaller case sizes than SL series. • RoHS Compliance. • SL /J\~H:;~ ° SPECIFICATIONS Items r~§ Characteristics ~ I~ Capacitance Tolerance ±20% (120Hz, 20°C) ~~~ii~~ Operating Temperature Range ~m5NilMiBII -40 - +85°C -40 - +85°C -25 - +85
MG series
Aluminum Electrolytic Capacitors su'scon MG series • Lower impedance at high frequency range. • Smaller case size and high ripple current. • RoHS Compliance. • ~1tt~.§jn~~!mtB~ ° • ~/J\ln~~~~Sl5~~)nt ° I I "I pn Su".scon S " 4F _.12-00 uF , ~ 1~ v-=- _~- ;:-. 1 SPECIFICATIONS Items r~§ Characteristi
MK series .O ne rank smaller case size than SK series.
Aluminum Electrolytic Capacitors SuJscon MK series .O ne rank smaller case size than SK series. • RoHS Compliance. ﹒ SK小型化晶 。 SPECIFIC"ATIONS Items J頁目 Characteristics特性Capacitance Tolerance ±20% (120Hz, 20°C) 靜電容量誤差 Operating Temperature Range -40 - +105°C -40 - +105°C -25 - +105°C 適用溫度範團 Rated Vol
MF series
Aluminum Electrolytic Capacitors su'scon MF series • Low IMP, high reliability, long life. • Suitable for switching regulator of computer, etc. • RoHS Compliance. • {tt~.§m ' ~~*fiM ' ~;;'® ° • I ~ ~ II~ffl~~ijil~~~8'SJOOIUJ~if.iH ° bn SU'sc on ~ ~F-100uF ~11 ·1 v~ '200v~~~ SPECIFICATIONS Items ~§ C
Aluminum Electrolytic Capacitors su'scon
• Enabled high ripple current lower impedance at high frequency range. • Long life 10,000 hours, 105°C • RoHS Compliance. •m~*)UEl~)Jit ' ~~~1ff~.I31JL ° • ~;:;$~10,000/J\1fif ' 105°C ° 'iscort SU'scon ('e- ...F 1f.{'0 ~F I '~-=-1G _v_ SPECIFICATIONS Items ~§ Characteristics ~n Capacitance Tolerance