Download: Technical Specifications Description

Technical Specifications

SSID: WiFiOBD IP: 192.168.0.10 Subnet: 255.255.255.0 Port: 35000 Range: 50 ft (Line of sight) Antenna: Internal Power Consumption: 0.75 Watts (With Power Switch) Wifi Standard: 802.11a/b/g Operating Temperature: -15 to 100 Deg Celsius Plastic: Automotive Grade Physical Dimensions: 2.75 x 1.25 x 1.2 inches

Description

WI-FI OBD AUTO CHECKER is capable of communicating with vehicles which adopt following protocols: ISO 9141 ISO 11898(aka. CAN) ISO 14230(aka. KWP2000) ISO 15765(aka. CAN) SAE J1939 WI-FI OBD AUTO CHECKER is able to detect and interpret these protocols automatically. It also provides support for high speed communications and a low power sleep mode. It use AT commands to communicate with a host device (PC, notebook, iPhone, iPod touch, iPad and so on). There are plenty of software packages available, which are fully compatible with WI-FI OBD AUTO CHECKER. Some of them have pretty useful features, such as engine running parameters monitoring, DTC reading and clearing, MPG meter, etc. You can even write your own software on a specified hardware platform if you wish, because the AT commands are fully documented and very well explained. WI-FI OBD AUTO CHECKER is measuring only 2.7 x 1.25x 0.9 inches, and it comes attached witha6ft OBDII cable for easy installation. It also comes included with a power switch built-in to prevent the need for having to constantly disconnect your unit from the OBDII port. It is compatible with 1996 and later vehicles. Connecting to your iPhone / iPod touch /iPad is made by WIFI connection in adHoc mode. Elder OBD compatible vehicles has a sticker indicates that the vehicle is OBD compatible. Model year 1996 and newer vehicles are compliant by default, and will not have this sticker. Following are some of the parameters which could be read from the vehicle. Vehicle Speed

RPM

Fuel Consumption* Engine Coolant Temp Fuel Pressure Calculated Engine Load Throttle Position Intake Manifold Pressure Air Intake Temp, Timing Advance Mass Air Flow Fuel Level Barometric Pressure EVAP System Vapor Pressure Fuel Trim *note: Your vehicle may not support all above parameters. How many parameters you can get is depended on the vehicle manufacturer’s implementation.

Vehicles supported

Our device works on all 1996 to 2010 cars and light trucks sold in the United States, including: Acura Daihatsu Isuzu Mercedes Porsche Smart Alfa Romeo Daimler Jaguar Mercury Regal Subaru Ariel Atom Dodge Jeep MG Renault Suzuki Aston Martin Ferrari Kia Mini Rolls-Royce Tesla Audi Fiat Lamborghini Mitsubishi Roush Toyota Bentley Ford Lancia Nissan Rover Triumph BMW Geo Land Rover Oldsmobile Saab TVR Buick GMC Lexus Opel Saleen Vauxhall Cadillac Holden Lincoln Pagani Saturn Volkswagen Chevrolet Honda Lotus Panoz Seat Volvo Chrysler Hummer Maserati Peugeot Scion Yugo Citroen Hyundai Mazda Plymouth Shelby …… Daewoo Infiniti McLaren Pontiac Skoda …… Some 1994 and 1995 models are also supported. To see if your vehicle is compliant, pop the hood and look for this sticker:

Compatible Software and Features:

What features you can have depended on what software you install on iPhone /iPod touch /iPad/ PC. There are a lot of commercial or free software. The features of the software differ from one another. User should choose his own software by his preference. For more details about the software, please consult the software vendors., Where can I get the software? You can log on to the apple application store to get your commercial/free software. There is a freeware in the CD-ROM comes along with the device. You can use this piece of software to config and test the WI-FI OBD AUTO CHECKER. After the installation of ScanMasterELM_DEMO_2.0.101.65, there would be a shortcut on the desktop. You need to config your PC or cellphone before you can use this software. For example, on a PC you should follow the steps shown in the pictures below:, IP address setting. IP: 192.168.0.11~254 Subent mask：255.255.255.0, After this, click OK. You can find the WiFiOBD device in the window shown below. Click Connect to connect your PC to WiFiOBD., Now the configuration of your PC is done. You can start to use the software.

Usage of the ScanMaster-ELM:

Double-click the ScanMaster-ELM DEMO icon to start it. You may need to config it as shown below： Click the button, choose WLAN in the drop list which resides in the tab named Communication Enter 192.168.0.10 as the IP address and 35000 as the port number. Click OK. Now the software is ready to use., These are what you’ll see when the software is running:, Note: This piece of software is a demo version. It only provides some basic features. If you want all the features, you can buy it from http://www.wgsoft.de

Using Iphone 4&IPAD&IPOD software setting:

Note: After you get the applications, you will have a detailed user manual, which is provided by the application venders, Here are a few examples to config the application. You need to change the WIFI settings(IP address and net mask) of your Iphone 4/IPAD/IPOD before you try to connect your device to WI-FI OBD AUTO CHECKER. Here is a step-by-step example： Click Settings ->General->Network Select Static，change the IP address to 192.168.0.11 （any value between 192.168.0.11~192.168.0.254 will work）, Scan for the WiFiOBD device, and join the network., You may need to config the software before you can use it. Let’s take DashCommand as an example After start, go to the page named Settings Change the settings according to the picture： Auto connect: ON OBD-II Interface Type： ELM Save the settings and you can start to use it., These are what you’ll see when the software is running:, Here are the instructions to config Rev for iPhone / iPod Touch Start the application and enter the Global Settings page, select KiWi Wifi as your hardware device. Click Custom, enter 192.168.0.10 as the IP address and 35000 as the port number., You don’t need to config SpeedPort, just run it after you have it installed on your device.]

15