Download: 2-3. BOARD LOCATION

2-3. BOARD LOCATION TB1 board CA1 board CP1 board ST2 board TB2 board ST3 board ST1 board – 11 – 3. ELECTRICAL ADJUSTMENT 3-1. Table for Servicing Tools 3-3. Adjustment Items and Order 1. IC501 Oscillation Frequency Adjustment Ref. No. Name Number Part code 2. Lens Adjustment J-1 Pattern box (color viewer) 1 VJ8-0190 3. AWB Adjustment 4. CCD White Point Defect Detect Adjustment J-2 Siemens star chart 1 5. CCD Black Point And White Point Defect Detect Adjust- J-3 Calibration software 1 VJ8-0202 ment In Lighted J-4 Chroma meter 1 VJ8-0192 6. LCD Panel Adjustment J-5 Spare lump 1 VJ8-0191 6-1. LC...
Author: Sean Shared: 8/19/19
Downloads: 1476 Views: 4011

Content

2-3. BOARD LOCATION TB1 board CA1 board CP1 board ST2 board TB2 board ST3 board ST1 board – 11 –, 3. ELECTRICAL ADJUSTMENT 3-1. Table for Servicing Tools 3-3. Adjustment Items and Order 1. IC501 Oscillation Frequency Adjustment Ref. No. Name Number Part code 2. Lens Adjustment J-1 Pattern box (color viewer) 1 VJ8-0190 3. AWB Adjustment 4. CCD White Point Defect Detect Adjustment J-2 Siemens star chart 1 5. CCD Black Point And White Point Defect Detect Adjust- J-3 Calibration software 1 VJ8-0202 ment In Lighted J-4 Chroma meter 1 VJ8-0192 6. LCD Panel Adjustment J-5 Spare lump 1 VJ8-0191 6-1. LCD VcomPP Adjustment J-6 Discharge jig 1 VJ8-0188 6-2. LCD VcomDC Adjustment Note: If the lens, CCD and board in item 2-5, it is necessary Note: J-1 Pattern box (color viewer) is 100 - 110 VAC only. to adjust again.

J-1 J-2 3-4. Setup

1. System requirements Windows 98 or Me or 2000 or XP IBM R -compatible PC with pentium processor CD-ROM drive 3.5-inch high-density diskette drive USB port 40 MB RAM Hard disk drive with at least 15 MB available VGA or SVGA monitor with at least 256-color display

J-3 J-4

2. Installing calibration software 1. Insert the calibration software installation diskette into your diskette drive. 2. Open the explorer. 3. Copy the DscCalDI_130a folder on the floppy disk in the FD drive to a folder on the hard disk. 3. Installing USB driver

J-5 J-6 Install the USB driver with camera or connection kit for PC.

4. Pattern box (color viewer) Turn on the switch and wait for 30 minutes for aging to take place before using Color Pure. It is used after adjusting the chroma meter (VJ8-0192) adjust color temperature to 3100 ± 20 K and luminosity to 900 ± 20 cd/m2. Be careful of handling the lump and its circumference are high temperature during use and after power off for a while. 3-2. Equipment 5. Computer screen during adjustment 1. Oscilloscope 2. Digital voltmeter Calibration Upload LCD 3. AC adaptor AWB Firmware R Bright B Bright VCOMDC 4. PC (IBM R -compatible PC, Pentium processor, Window Focus Image RGB Offset Gain VCOMPP 98 or Me or 2000 or XP) UV Matrix Cal Mode Initialize Tint Phase

OK

EVF VCO Cal Data H AFC TestLCD Type

OK

Setting Language USB storage Get VID Set Serial Set Video Mode Set PID Set Rev. Set – 12 –, 3-5. Connecting the camera to the computer 1. Line up the arrow on the cable connector with the notch on the camera's USB port. Insert the connector. 2. Locate a USB port on your computer. To USB port AC adaptor USB cable – 13 –, 3-6. Adjust Specifications Preparation: [ST1 board (Side B)] Adjustment condition: More than A3 size siemens star chart Fluorescent light illumination with no flicker Illumination above the subject should be 400 lux ± 10 %. Adjustment method: CL531 1. Set the siemens star chart 150 cm ± 3 cm so that it be- comes center of the screen. 2. Double-click on the DscCalDi.exe. VR501 3. Click the Focus, and click the Yes. 4. Lens adjustment value will appear on the screen. 5. Click the OK. Note: 3. AWB Adjustment 1. Frequency adjustment is necessary to repair in the ST1 board and replace the parts. It is carried out with play mode. Preparation: 1. Remove CN931 in the CP1 board, and lift the cabinet front. ST1 board can be seen. (Connect all connectors except CN931.) 2. Insert the SD card. 3. Set the selector dial to playback mode. Comfirm that the playback image can be seen on the LCD. 1. IC501 Oscillation Frequency Adjustment Measuring Point CL531 Measuring Equipment Frequency counter Camera ADJ. Location VR501 ADJ. Value 497.3 ± 1 kHz Pattern box (color viewer) Adjustment method: 1. Adjust with VR501 to 497.3 ± 1 kHz. Preparation: 2. Lens Adjustment POWER switch: ON Adjusting method: 1. When setting the camera in place, set it to an angle so that nothing appears in any part of the color viewer except the white section. (Do not enter any light.) 2. Double-click on the DscCalDi.exe. 3. Click the AWB, and click the Yes. 4. AWB adjustment value will appear on the screen. 5. Click the OK. 4. CCD White Point Defect Detect Adjustment Preparation: POWER switch: ON Adjustment method: 1. Double-click on the DscCalDi.exe. Camera Approx. 2. Select “CCD Defect” on the LCD “Test”, and click the “Yes”. 150 cm 3 cm 3. After the adjustment is completed, OK will display. Siemens 4. Click the OK. star chart – 14 –, 5. CCD Black Point And White Point Defect Detect 6-1. LCD VcomPP Adjustment Adjustment In Lighted Preparation: Adjusting method: 1. Double-click on the DscCalDi.exe. 2. Adjust LCD “VCOMPP” so that the amplitude of the CL404 waveform is 5.45 V ± 0.05 Vp-p. 5.45 V ± 0.05 Vp-p Camera Pattern box (color viewer) CL404 waveform Preparation: 6-2. LCD VcomDC Adjustment POWER switch: ON Adjusting method: Setting of pattern box: 1. Adjust LCD “VCOMDC” so that the amplitude of the CL404 Color temperature: 3100 ± 20 (K) waveform is 4.02 V ± 0.05 Vp-p. Luminance: 900 ± 20 (cd/m2) Adjusting method: 1. Set the camera 0 cm from the pattern box. (Do not enter any light.) 2. Double-click on the DscCalDi.exe. 3. Select “CCD Black” on the LCD “Test”, and click the “Yes”. 4.02 V 4. After the adjustment is completed, the number of defect ± 0.05 Vp-p will appear.

GND

6. LCD Panel Adjustment [CP1 board (Side A)] CL404 waveform CL404 (VCOM) – 15 –, 4. USB STORAGE INFORMATION

REGISTRATION

USB storage data is important for when the camera is con- nected to a computer via a USB connection. If there are any errors in the USB storage data, or if it has not been saved, the USB specification conditions will not be sat- isfied, so always check and save the USB storage data. Preparation: Adjustment method: 1. Connect the camera to a computer. (Refer to 3-5. Con- necting the camera to the computer on the page 13.) 2. Double-click on the DscCalDi.exe. 3. Click on the Get button in the USB storage window and check the USB storage data. VID: SANYO PID: VPC-J1 or VPC-J1EX Serial: Rev. : 1.00 4. Check the “Serial” in the above USB storage data. If the displayed value is different from the serial number printed on the base of the camera, enter the number on the base of the camera. Then click the Set button. 5. Next, check VID, PID and Rev. entries in the USB storage data. If any of them are different from the values in 3. above, make the changes and then click the corresponding Set button. Calibration Upload LCD AWB Firmware R Bright B Bright VCOMDC Focus Image RGB Offset Gain VCOMPP UV Matrix Cal Mode Initialize Tint Phase

OK

EVF VCO Cal Data H AFC TestLCD Type

OK

Setting Language USB storage Get VID Set Serial Set Video Mode Set PID Set Rev. Set – 16 –]
15

Similar documents

1-4. ST1 STROBE CIRCUIT DESCRIPTION
1-4. ST1 STROBE CIRCUIT DESCRIPTION 1. Charging Circuit 2. Light Emission Circuit When UNREG power is supplied to the charge circuit and the When RDY and TRIG signals are input from the ASIC expan- CHG signal from microprocessor becomes High (3.3 V), the sion port, the stroboscope emits light. charg
CIRCUIT DIAGRAMS & PRINTED WIRING BOARDS
CIRCUIT DIAGRAMS & PRINTED WIRING BOARDS TABLE OF CONTENTS OVERALL WIRING & BLOCK DIAGRAMS Page OVERALL WIRING ... C3 OVERALL CIRCUIT ... C4 CAMERA CIRCUIT ... C4 FLASH CIRCUIT ... C5 POWER CIRCUIT ... C5 LENS CIRCUIT ... C5 ASIC CIRCUIT ... C6 SYSTEM CONTROL CIRCUIT ... C7 CIRCUIT DIAGRAMS ST1,2,3
Color Digital Camera
Color Digital Camera VPC-MZ1E VPC-MZ1EX VPC-MZ1 INDEX 1. OUTLINE OF CIRCUIT DESCRIPTION DISASSEMBLY ELECTRICAL ADJUSTMENT TROUBLE SHOOTING GUIDE 2. PARTS LIST OVERALLWIRING Click on this button found on the first page of each file to return to this screen.
SERVICE MANUAL Color Digital Camera VPC-MZ1E VPC-MZ1EX VPC-MZ1
FILE NO. SERVICE MANUAL Color Digital Camera VPC-MZ1E (Product Code : 126 287 01) (U.K.) VPC-MZ1EX (Product Code : 126 287 02) (Europe) (PAL General) VPC-MZ1 (Product Code : 126 287 03) (U.S.A.) (Canada) Contents 1. OUTLINE OF CIRCUIT DESCRIPTION ... 2 2. DISASSEMBLY ... 12 3. ELECTRICAL ADJUSTMENT
SERVICE MANUAL Digital Camera VPC-J1 VPC-J1EX
FILE NO. SERVICE MANUAL Digital Camera VPC-J1 (Product Code : 126 626 01) (U.S.A) (Canada) VPC-J1EX (Product Code : 126 626 02) (Europe) (PAL General) Contents 1. OUTLINE OF CIRCUIT DESCRIPTION ... 2 2. DISASSEMBLY ... 9 3. ELECTRICAL ADJUSTMENT ... 12 4. USB STORAGE INFORMATION REGISTRATION ... 16
Notice FILE No. E : Deletion F : Addition G : Multiple Use
Notice FILE No. CORRECTION PRODUCTION CHANGE SERVICE FLASH ADD INFORMATION Please add this notice to the Service manual listed below. Category : Color Digial Camera Date :Aug.24 .2001 Model Name Reference No. Destination VPC-MZ1E SM5310304 U.K. VPC-MZ1EX SM5310304 Europe & PAL General VPC-MZ1 SM5310
1-4. PW1 POWER CIRCUIT DESCRIPTION
1-4. PW1 POWER CIRCUIT DESCRIPTION 1. Outline 3. Digital 3.3 V Power Output This is the main PW1 power circuit, and is comprised of the 3.3 V (D) is output. Feedback for the 3.3 V (D) is provided to following blocks. the switching controller (Pins (1) of IC501) so that PWM con- Switching controller
VPC-MZ2 VAR-GA4U
FILE NO. SERVICE MANUAL Digital Camera VPC-MZ2EX (Product Code : 126 606 02) (Europe) (PAL General) VPC-MZ2 (Product Code : 126 606 03) (U.S.A.) (Canada) VAR-GA4U (Product Code : 126 301 05) Contents (U.S.A.) 1. OUTLINE OF CIRCUIT DESCRIPTION ... 2 (Canada) 2. DISASSEMBLY ... 12 3. ELECTRICAL ADJUST
Color Digital Camera VPC-MZ1E VPC-MZ1EX VPC-MZ1 INDEX 1. OUTLINE OF CIRCUIT DESCRIPTION DISASSEMBLY ELECTRICAL ADJUSTMENT TROUBLE SHOOTING GUIDE 2. PARTS LIST
Color Digital Camera VPC-MZ1E VPC-MZ1EX VPC-MZ1 INDEX 1. OUTLINE OF CIRCUIT DESCRIPTION DISASSEMBLY ELECTRICAL ADJUSTMENT TROUBLE SHOOTING GUIDE 2. PARTS LIST OVERALLWIRING Click on this button found on the first page of each file to return to this screen. FILE NO. SERVICE MANUAL Color Digital Camer
  OUTLINE OF CIRCUIT DESCRIPTION 1-1. CA1 and A PART OF CA2 CIRCUIT DESCRIPTIONS Around CCD block 10987654321
OUTLINE OF CIRCUIT DESCRIPTION 1-1. CA1 and A PART OF CA2 CIRCUIT DESCRIPTIONS Around CCD block 109876543211. IC Configuration CA1 board IC903 (ICX274AQ) CCD imagerGBGBIC901, IC902 (CXD3400N) V driverRGRGCA2 boardGBGBRGRGIC911 (H driver, CDS, AGC and A/D converter) GBGBRGRG2. IC903 (CCD imager) GB
  PARTS LIST ELECTRICAL PARTS
PARTS LIST ELECTRICAL PARTS Note: 1. Materials of Capacitors and Resistors are abbreviated as follows ; Resistors Capacitors MT-FILM Metallized Film Resistor MT-POLYEST Metallized Polyester Capacitor MT-GLAZE Metallized Glaze Resistor MT-COMPO Metallized Composite Capacitor OXIDE-MT Oxide Metalliz
CIRCUIT DIAGRAMS & PRINTED WIRING BOARDS
CIRCUIT DIAGRAMS & PRINTED WIRING BOARDS TABLE OF CONTENTS OVERALL WIRING & BLOCK DIAGRAMS OVERALL WIRING ... C3 OVERALL CIRCUIT ... C4 POWER CIRCUIT(CA3) ... C4 POWER CIRCUIT(PW1) ... C4 FLASH CIRCUIT ... C5 CAMERA CIRCUIT ... C5 LENS CIRCUIT ... C5 MAIN CIRCUIT ... C6 SYSTEM CONTROL CIRCUIT ... C6
  ELECTRICAL ADJUSTMENT 16-3. LCD Gain Adjustment 3-1. Table for Servicing Tools 16-5. LCD Blue Brightness Adjustment 3-4. Setup
ELECTRICAL ADJUSTMENT 16-3. LCD Gain Adjustment 16-4. LCD Red Brightness Adjustment 3-1. Table for Servicing Tools 16-5. LCD Blue Brightness Adjustment Note: If the lens, CCD and board in item 12-15, it is neces- Ref. No. Name Part code sary to adjust again. Item 12-15 adjustments other than J-1 C
SANYO Electric Co., Ltd.
SANYO Electric Co., Ltd. Apr./’02 Printed in Japan Osaka, Japan
  OUTLINE OF CIRCUIT DESCRIPTION 1-1. CA1 and A PART OF CA2 CIRCUIT DESCRIPTIONS Around CCD block 10987654321
OUTLINE OF CIRCUIT DESCRIPTION 1-1. CA1 and A PART OF CA2 CIRCUIT DESCRIPTIONS Around CCD block 109876543211. IC Configuration CA1 board IC901 (ICX274AQ) CCD imagerGBGBCA2 boardRGRGIC901 (H driver, CDS, AGC and A/D converter) GBGBRGRGGBGB2. IC901 (CA1) (CCD imager) RGRG[Structure] GBGBRGRG(Note) I
1-4. ST1 STROBE CIRCUIT DESCRIPTION
1-4. ST1 STROBE CIRCUIT DESCRIPTION 1. Charging Circuit 2. Light Emission Circuit When UNREG power is supplied to the charge circuit and the When RDY and TRIG signals are input from the ASIC expan- CHG signal from SY1 board becomes High (3.3 V), the charg- sion port, the stroboscope emits light. ing
VPC-MZ3 VPC-MZ3GX
FILE NO. SERVICE MANUAL Digital Camera VPC-MZ3EX (Product Code : 126 612 01) (Europe) (PAL General) VPC-MZ3 (Product Code : 126 612 02) (U.S.A.) (Canada) VPC-MZ3GX (Product Code : 126 612 03) (General) Contents 1. OUTLINE OF CIRCUIT DESCRIPTION ... 2 2. DISASSEMBLY ... 10 VAR-G6U 3. ELECTRICAL ADJUS
CIRCUIT DIAGRAMS & PRINTED WIRING BOARDS
CIRCUIT DIAGRAMS & PRINTED WIRING BOARDS TABLE OF CONTENTS OVERALL WIRING & BLOCK DIAGRAMS OVERALL WIRING ... C3 OVERALL CIRCUIT ... C4 CAMERA CIRCUIT ... C4 FLASH CIRCUIT ... C5 POWER CIRCUIT ... C5 LENS CIRCUIT ... C5 MAIN, AUDIO, LCD DRIVER CIRCUIT ... C6 SYSTEM CONTROL CIRCUIT ... C7 CIRCUIT DIA
  ELECTRICAL ADJUSTMENT Note: If the lens, CCD and board in item 2-6, it is necessary
ELECTRICAL ADJUSTMENT Note: If the lens, CCD and board in item 2-6, it is necessary to adjust again. Item 2-6 adjustments other than these 3-1. Table for Servicing Tools should be carried out in sequence. For 5 and 6, carry out adjustment after sufficient charging has taken place. Ref. No. Name Nu
  OUTLINE OF CIRCUIT DESCRIPTION 1-1. CA-A CIRCUIT DESCRIPTIONS Around CCD block
OUTLINE OF CIRCUIT DESCRIPTION 1-1. CA-A CIRCUIT DESCRIPTIONS Around CCD block 1. IC Configuration IC903 (RJ24J1AA0PT) CCD imager IC902 (TC74VHC04FTP) H driver IC904 (LR366854) V driver432124 23 22 21 IC905 (AD9806KST) CDS, AGC, A/D converter 2. IC905 (CCD) PS1 5 20 [Structure] PS3(LCC24 Frame tra
  DISASSEMBLY B
DISASSEMBLY 2-1. REMOVAL OF CABINET BACK, CABINET FRONT, TB1 BOARD AND LCD5D1. Open the cover battery. 2. Four screws 1.7x411 E 3. Open the cover card. C 4. Four screws 1.7x635. Cabinet back 6. Screw 1.7x47. Screw 1.7x68. Cabinet topAB9. Cabinet front 9 10. Cover battery6FA11. Cover card 12. Shaft
VPC-R1E VPC-R1EX VPC-R1G
FILE NO. SERVICE MANUAL Digital Camera VPC-R1 AC adaptor (Product Code : 126 293 00)(U.S.A., Canada) VPC-R1E (Product Code : 126 293 01) (U.K.) VPC-R1EX (Product Code : 126 293 02) (Europe, PAL General) VPC-R1G (Product Code : 126 293 06) Contents (No Tax) 1. OUTLINE OF CIRCUIT DESCRIPTION ... 2 2.
1-4. CP1 STROBO CIRCUIT DESCRIPTION
1-4. CP1 STROBO CIRCUIT DESCRIPTION 1. Charging Circuit 2. Light Emission Circuit When UNREG power is supplied to the charge circuit and the When RDY and TRIG signals are input from the ASIC, the CHG signal becomes High (3.3 V), the charging circuit starts stroboscope emits light. operating and the
SERVICE MANUAL Digital Camera VPC-MZ3EX VPC-MZ3 VPC-MZ3GX
FILE NO. SERVICE MANUAL Digital Camera VPC-MZ3EX (Product Code : 126 612 01) (Europe) (PAL General) VPC-MZ3 (Product Code : 126 612 02) (U.S.A.) (Canada) VPC-MZ3GX (Product Code : 126 612 03) (General) Contents 1. OUTLINE OF CIRCUIT DESCRIPTION ... 2 2. DISASSEMBLY ... 10 VAR-G6U 3. ELECTRICAL ADJUS
CIRCUIT DIAGRAMS & PRINTED WIRING BOARDS
CIRCUIT DIAGRAMS & PRINTED WIRING BOARDS TABLE OF CONTENTS OVERALL WIRING & BLOCK DIAGRAMS OVERALL WIRING C1 OVERALL CIRCUIT C2 CAMERA CIRCUIT C3 SYSTEM CONTROL CIRCUIT C4 LENS CIRCUIT C5 FLASH CIRCUIT POWER SUPPLY CIRCUIT CIRCUIT DIAGRAMS CP1 BOARD (CAA) CAMERA C6 CP1 BOARD (CAB) MAIN, LCD DRIVER &
  USB STORAGE INFORMATION REGISTRATION
USB STORAGE INFORMATION REGISTRATION USB storage data is important for when the camera is con- nected to a computer via a USB connection. If there are any errors in the USB storage data, or if it has not been saved, the USB specification conditions will not be sat- isfied, so always check and save
Notice FILE No. CORRECTION PRODUCTION CHANGE SERVICE FLASH ADD INFORMATION Please add this notice to the Service manual listed below. Category : Digital Camera Date :Mar.18, 2002
Notice FILE No. CORRECTION PRODUCTION CHANGE SERVICE FLASH ADD INFORMATION Please add this notice to the Service manual listed below. Category : Digital Camera Date :Mar.18, 2002 Model Name Reference No. Destination VPC-R1 SM5310265 U.S.A. & Canada VPC-R1E SM5310265 U.K. VPC-R1EX SM5310265 Europe &
SERVICE MANUAL Digital Camera VPC-R1 AC adaptor (Product Code : 126 293 00)(U.S.A., Canada) VPC-R1E VPC-R1EX VPC-R1G
FILE NO. SERVICE MANUAL Digital Camera VPC-R1 AC adaptor (Product Code : 126 293 00)(U.S.A., Canada) VPC-R1E (Product Code : 126 293 01) (U.K.) VPC-R1EX (Product Code : 126 293 02) (Europe, PAL General) VPC-R1G (Product Code : 126 293 06) Contents (No Tax) 1. OUTLINE OF CIRCUIT DESCRIPTION ... 2 2.
SERVICE MANUAL Digital Camera VPC-S6U VPC-S6
FILE NO. SERVICE MANUAL Digital Camera VPC-S6U (Product Code : 168 028 01) (U.S.A.) (Canada) VPC-S6 (Product Code : 168 028 02) (Europe) (South America) (China) (Australia) (Korea) (Taiwan) (General) Contents 1. OUTLINE OF CIRCUIT DESCRIPTION ... 3 2. DISASSEMBLY ... 11 3. ELECTRICAL ADJUSTMENT ...
WARNING Do not use solder containing lead. Note:
WARNING Do not use solder containing lead. Note: This product has been manufactured using lead-free solder in If replacing existing solder containing lead with lead-free sol- order to help preserve the environment. der in the soldered parts of products that have been manufac- Because of this, be sur