Download: Notice FILE No. CORRECTION PRODUCTION CHANGE SERVICE FLASH ADD INFORMATION Please add this notice to the Service manual listed below. Category : Digital Camera Date :Mar.18, 2002

Notice FILE No. CORRECTION PRODUCTION CHANGE SERVICE FLASH ADD INFORMATION Please add this notice to the Service manual listed below. Category : Digital Camera Date :Mar.18, 2002 Model Name Reference No. Destination VPC-R1 SM5310265 U.S.A. & Canada VPC-R1E SM5310265 U.K. VPC-R1EX SM5310265 Europe & PAL general VPC-R1G SM5310265 No Tax VAR-G5U SM5310265 U.S.A. & Canada VAR-G5EX SM5310265 Europe & PAL general VAR-G5E SM5310265 U.K. The reason of change. A : Misprint B : Quality Reliability C : Standardization D : Design E : Deletion F : Addition G : Multiple Use Page 18 [NEW]

4. USB STORAGE INFORMATION REGISTRATION Preparation: [OLD] 1. Enter "usbmass" using all lower case letters to the CF card, Preparation: and push the enter key. Next enter "end" using all lower POWER switch: ON case letters, and save. Adjustment method: the 1st line usbmass 1. Connect the camera to a computer. (Refer to 3-5. Connect- the 2nd line end ing the camera to the computer on the page 14.) 2. Set the CF card which is saved to the camera. 2. Double-click on the DscCalDi128a. 3. Insert the DC jack, and turn on the camera. 3. Click on the Get button in the USB storage window and 4. Turn on the computer, and connect the camera and com- check the USB storage data. puter with USB cable. (Refer to 3-5. Connecting the VID: SANYO camera to the computer on the page 14.) PID: VPC-R1 or VPC-R1E or VPC-R1EX or VPC-R1G Adjustment method: Serial: 1. Double-click on the DscCalDi.exe in the DscCalDi128a. Rev. : 1.00 2. Click on the Get button in the USB storage window and 4. Check the “Serial” in the above USB storage data. If the check the USB storage data. displayed value is different from the serial number printed VID: SANYO on the base of the camera, enter the number on the base PID: VPC-R1/DSC-R1 of the camera. Then click the Set button. Serial:####******** (####: model name, ********: serial No.) 5. Next, check VID, PID and Rev. entries in the USB storage Rev. : 1.00 data. If any of them are different from the values in 3. above, 3. Check the “Serial” in the above USB storage data. If the make the changes and then click the corresponding Set displayed value is different from the serial number printed button. on the base of the camera, enter the model name and the number on the base of the camera. Then click the Set button. model name VPC-R1⇒R1U0 VPC-R1E⇒R1E0 VPC-R1EX⇒R1EX VPC-R1G⇒R1G0 4. Next, check VID, PID and Rev. entries in the USB storage data. If any of them are different from the values in 2. above, make the changes and then click the corresponding Set button. 5. Close the DscCal after completing the USB storage infor- mation registration. 6. Pull the DC jack to turn off the camera, and pull the CF card. SB117/U, E, EX, EX2, SVA01/U, EX, E SANYO Electric Co., Ltd. 126 293 00, 01, 02, 06 126 301 01, 02, 03 Osaka, Japan Reference No. SM5310265-01 – 1 –]

15