Download: DSC-P7 SERVICE MANUAL LEVEL 1 US Model Ver 1.0 2002. 06 Canadian Model Revision History AEP Model UK Model E Model Hong Kong Model Australian Model Chinese Model

DSC-P7 SERVICE MANUAL LEVEL 1 US Model Ver 1.0 2002. 06 Canadian Model Revision History AEP Model UK Model E Model Hong Kong Model Australian Model Chinese Model Korea Model Tourist Model Japanese Model Link SPECIFICATIONS SELF DIAGNOSIS FUNCTION ORNAMENTAL PARTS • INSTRUCTION MANUAL is shown at the end of this document. DIGITAL STILL CAMERA DSC-P7 COVER SPECIFICATIONS System Output connectors AC-LS1A AC power adaptor Image device 8.93 mm (1/1.8 type) color A/V OUT (MONO) jack Power requirements CCD Minijack AC 100 – 240 V, 50/60 Hz Primary color filter Video: 1 Vp-p, 75 Ω, unbalanced, Rated o...
Author: Acal1978 Shared: 8/19/19
Downloads: 1019 Views: 2630

Content

DSC-P7 SERVICE MANUAL LEVEL 1

US Model Ver 1.0 2002. 06 Canadian Model Revision History AEP Model UK Model E Model Hong Kong Model Australian Model Chinese Model Korea Model Tourist Model Japanese Model Link SPECIFICATIONS SELF DIAGNOSIS FUNCTION ORNAMENTAL PARTS • INSTRUCTION MANUAL is shown at the end of this document.

DIGITAL STILL CAMERA

,

DSC-P7 COVER SPECIFICATIONS

System Output connectors AC-LS1A AC power adaptor Image device 8.93 mm (1/1.8 type) color A/V OUT (MONO) jack Power requirements CCD Minijack AC 100 – 240 V, 50/60 Hz Primary color filter Video: 1 Vp-p, 75 Ω, unbalanced, Rated output voltage Total pixels number of camera sync negative DC 4.2 V, 1.5 A Approx. 3 340 000 pixels Audio: 327 mV (at a 47 kΩ load) Operating temperature range Lens 3 × zoom lens Output impedance 2.2 kΩ 0° to +40°C (32° to +104°F) f=8−24.0 mm (5/16 − 15/16 inches) USB jack mini-B Storage temperature range (35 mm camera conversion: 39 to 17 19 −20° to +60°C (−4° to +140°F)117mm (1 /32 − 4 /32 inches)) LCD screen17F2.8−5.6 Dimensions 105 × 36 × 56 mm (4 /4 × 1 /16 × LCD panel used 2 1/4 inches) (W/H/D, protruding 3.8 cm (1.5 type) TFT drive parts not included) Camera Total number of dots Mass Approx. 180 g (6 oz) Effective pixels number of camera 123 200 (560×220) dots (adaptor only) Approx. 3 210 000 pixels Exposure control Automatic, Power, general NP-FC10 battery pack Scene selection (three modes) Used battery pack Used battery Lithium ion battery White balance NP-FC10 Maximum voltage Automatic, Daylight, Cloudy, Power requirements DC 4.2 V Fluorescent, Incandescent 3.6 V Nominal voltage File format Still images: DCF conformity Power consumption (when shooting) DC 3.6 V (Exif Ver. 2.2, JPEG conformity 1.9W Capacity 2.4 Wh (675 mAh) GIF at Clip Motion) Operating temperature range DPOF correspondence 0° to +40°C (32° to +104°F) Accessories Movies: MPEG1 conformity Storage temperature range • A/V connecting cable (1)(Monaural) Audio with still image: MPEG1 −20° to +60°C (−4° to +140°F) • NP-FC10 battery pack (1) conformity (Monaural) Dimensions 114 × 51.5 × 35.8 mm • AC-LS1A AC power adaptor (1) (4 1Recording media /2 × 2 × 1 3 /8 i nches) • Power cord (mains lead) (1) “Memory Stick” (W/H/D, protruding portions not • USB cable (1) Flash Recommended distance included) • Wrist strap (1) 0.5 to 3.8 m (1.6 to 12.5 ft) (W) Mass 206 g (7 oz) (NP-FC10 battery pack, • “Memory Stick” (16MB) (1) 0.6 to 2.4 m (2 to 7.9 ft) (T) “Memory Stick” and wrist strap (when ISO sensitivity is set to Auto) included) • CD-ROM (USB driver: SPVD-008) (1) Microphone Electret condenser microphone • Operating Instructions (1) Speaker Dynamic speaker Design and specifications are subject to change without notice. SAFETY-RELATED COMPONENT WARNING!! ATTENTION AU COMPOSANT AYANT RAPPORT À LA SÉCURITÉ! COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE WITH LES COMPOSANTS IDENTIFÉS PAR UNE MARQUE 0 SUR LES MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU PUBLISHED BY SONY. DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.

SAFETY CHECK-OUT After correcting the original service problem, perform the following

safety checks before releasing the set to the customer. 1. Check the area of your repair for unsoldered or poorly-soldered 5. Check the B+ voltage to see it is at the values specified. connections. Check the entire board surface for solder splashes 6. Flexible Circuit Board Repairing and bridges. • Keep the temperature of the soldering iron around 270˚C 2. Check the interboard wiring to ensure that no wires are during repairing. "pinched" or contact high-wattage resistors. • Do not touch the soldering iron on the same conductor of the 3. Look for unauthorized replacement parts, particularly circuit board (within 3 times). transistors, that were installed during a previous repair. Point • Be careful not to apply force on the conductor when soldering them out to the customer and recommend their replacement. or unsoldering. 4. Look for parts which, through functioning, show obvious signs of deterioration. Point them out to the customer and recommend their replacement. — 2 —,

DSC-P7

COVER SELF-DIAGNOSIS FUNCTION [Description on Self-diagnosis Display] Self-diagnosis display • C: ss: ss You can reverse the camera malfunction yourself. (However, contact your Sony dealer or local authorized Sony service facility when you cannot recover from the camera malfunction.) • E: ss: ss Contact your Sony dealer or local authorized Sony service facility. Display Code Countermeasure Cause Caution Display During Error C:32:ss Turn the power off and on again. Trouble with hardware. SYSTEM ERROR Format the “Memory stick”. Unformatted memory stick is inserted. FORMAT ERROR C:13:ss Insert a new “Memory Stick”. Memory stick is broken. MEMORY STICK ERROR E:61:ss Checking of lens drive circuit. When failed in the focus and zoom initialization. — Checking of flash unit or replacement Abnormality when flash is being E:91:ss of flash unit. charged. — 3 —,

DSC-P7

COVER 1. MAIN PARTS Note: • Items marked “*” are not stocked since they are seldom required for routine service. The components identified by mark 0 or dotted Some delay should be anticipated when ordering these items. line with mark 0 are critical for safety. • The parts numbers of such as a cabinet are also appeared in this section. Replace only with part number specified. Refer to the parts number mentioned below the name of parts to order. 1. ORNAMENTAL PARTS DC cover 3-075-831-11 (To change this part, the set needs to be disassembled.) LCD window 3-075-821-01 Adhesive sheet (1.5) 3-075-822-01 CPC lid 3-064-225-01

Checking supplied accessories.

Power cord (1) AC adaptor NC-NF10 battery pack (1) Wrist strap (1) 0 1-696-819-11 (AUS) AC-LS1 (1) 3-050-664-11 0 1-769-608-11 (AEP, E) 0 1-476-332-13 (US, CND, JE, J) 0 1-776-985-11 (KR) 0 1-476-332-23 (CH) 0 1-782-476-11 (CH) 0 1-476-332-33 (KR) 0 1-783-374-11 (UK, HK) 0 1-476-332-43 Other accessories 0 1-790-107-22 (US, CND) (AEP, UK, E, AUS, HK) 01-569-007-11 ADAPTOR, CONVERSION (E, JE) 0 1-790-732-11 (JE, J) 01-569-008-21 ADAPTOR, CONVERSION 2P (E) 3-065-665-05 MANUAL, INSTRUCTION (JAPANESE) (J) 3-075-896-01 MANUAL, INSTRUCTION (JAPANESE) (J) 3-075-896-11 MANUAL, INSTRUCTION (ENGLISH) (US, CND, AEP, UK, E, AUS, CH, HK, JE) 3-075-896-21 MANUAL, INSTRUCTION (FRENCH, GERMAN) (CND, AEP) 3-075-896-31 MANUAL, INSTRUCTION (SPANISH, PORTUGUESE) (AEP, E, JE) USB cable (1) A/V connecting cable (1) 1-823-932-11 1-824-111-11 3-075-896-41 MANUAL, INSTRUCTION (ITALIAN, DUTCH) (AEP) 3-075-896-51 MANUAL, INSTRUCTION (TRADITIONAL CHINESE, SIMPLIFIED CHINESE) (E, CH, HK, JE) 3-075-896-61 MANUAL, INSTRUCTION (RUSSIAN, SWEDISH) (AEP) "Memory Stick" (16MB) (1) CD-ROM 3-075-896-71 MANUAL, INSTRUCTION (ARABIC) (E) (SPVD-008 USB driver) (1) 3-075-896-81 MANUAL, INSTRUCTION (KOREAN) (KR) 3-072-414-01 (EXCEPT US, CND, J) 3-072-654-01 (US, CND, J) 3-075-897-01 MANUAL, INSTRUCTION (JAPANESE) (J) 2002F0500-1 9-929-976-41 Sony EMCS Co. ©2002.6 — 4 — Published by DI Customer Center, filename[C:\My Documents\_upload job\3075896111\3075896111DSCP7UC\01COV-DSCP7UC\010COV01.FM] masterpage:Right 010COV 3-075-896-11(1) Getting started _ Shooting still images _ Viewing still images _ Deleting still images_ Copying still images to your computer _ Before advanced operations _ ver you call upon your Sony dealer regarding this product. l No. Advanced still image shooting_ No. Advanced still image viewing_ Still image editing _ njoying movies_ roubleshooting_ dditional information _

C Index

2 So model name1[DSC-P7/P9]

Di Ope

Before retain

Own

The m serial whene Mode Serial

DS

© 200 DSC-P7/P9 -P7/P9 ny Corporatio n

E T A

01.FM Page 1 Thursday, May 23, 2002 3:52 PM gital Still Camera rating Instructions operating the unit, please read this manual thoroughly, and it for future reference. er’s Record odel and serial numbers are located on the bottom. Record the number in the space provided below. Refer to these numbers, filename[C:\My Documents\_upload job\3075896111\3075896111DSCP7UC\02GB-DSCP7UC\02WAR.FM] masterpage:Left 01cov.book Page 2 Thursday, May 23, 2002 3:57 PM Declaration of Conformity Trade Name: SONY Model No.: DSC-P7 Responsible Party:Sony Electronics Inc. Address: 680 Kinderkamack Road, Oradell, NJ 07649 USA Telephone No.: 201-930-6972 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

AUTION

ou are cautioned that any changes or odifications not expressly approved in this anual could void your authority to operate is equipment. WARNING Never expose the battery pack to temperature above 60°C (140°F), such as in a car parked in To prevent fire or shock hazard, do the sun or under direct sunlight. not expose the unit to rain or If you have any questions about this product, moisture. you may call: Sony Customer Information Services Center For the Customers in the U.S.A. 1-800-222-SONY (7669) The number below is for the FCC related matters only. Regulatory Information Declaration of Conformity Trade Name: SONY Model No.: DSC-P9 Responsible Party:Sony Electronics Inc. Address: 680 Kinderkamack Road, Oradell, NJ C 07649 USA Y Telephone No.: 201-930-6972mmThis symbol is intended to th alert the user to the presence This device complies with Part 15 of the of uninsulated “dangerous FCC Rules. Operation is subject to the voltage” within the product’s following two conditions: (1) This device enclosure that may be of may not cause harmful interference, and sufficient magnitude to (2) this device must accept any interference constitute a risk of electric received, including interference that may shock to persons. cause undesired operation. This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance., filename[C:\My Documents\_upload job\3075896111\3075896111DSCP7UC\02GB-DSCP7UC\02WAR.FM] masterpage:Right 01cov.book Page 3 Thursday, May 23, 2002 3:57 PM Note: For the Customers in the U.S.A. Notice on the supplied AC wer adaptor for the stomers in the United ngdom oulded plug complying with BS 1363 is to this equipment for your safety and enience. ld the fuse in the plug supplied need to be ced, a 5 AMP fuse approved by ASTA or to BS 1362, (i.e., marked with or ) must be used. e plug supplied with this equipment has a chable fuse cover, be sure to attach the cover after you change the fuse. Never he plug without the fuse cover. If you ld lose the fuse cover, please contact your est Sony service station. r the Customers in Germany ctive:EMC Directive 89/336/EEC, 92/31/EEC equipment complies with the EMC lations when used under the following mstances: sidential area siness district ht-industry district s equipment complies with the EMC dard regulations EN55022 Class B.) This equipment has been tested and found to comply with the limits for a Class B digital and Canada po device, pursuant to Part 15 of the FCC Rules. cu These limits are designed to provide RECYCLING LITHIUM-ION Ki reasonable protection against harmful BATTERIES interference in a residential installation. This A mLithium-Ion batteries are fitted equipment generates, uses, and can radiate recyclable. conv radio frequency energy and, if not installed You can help preserve our Shou and used in accordance with the instructions, environment by returning your may cause harmful interference to radio replaused rechargeable batteries to the communications. However, there is no BSI collection and recycling location nearest you. guarantee that interference will not occur in a mark particular installation. If this equipment does For more information regarding recycling of If th cause harmful interference to radio or rechargeable batteries, call toll free deta television reception, which can be determined 1-800-822-8837, or visit by turning the equipment off and on, the user http://www.rbrc.org/ fuse is encouraged to try to correct the interference use tCaution: Do not handle damaged or leaking by one or more of the following measures: shouLithium-Ion batteries. near —Reorient or relocate the receiving antenna. —Increase the separation between the CAUTION equipment and receiver. TO PREVENT ELECTRIC SHOCK, DO NOT Fo —Connect the equipment into an outlet on a USE THIS POLARIZED AC PLUG WITH AN circuit different from that to which the EXTENSION CORD, RECEPTACLE OR Dire receiver is connected. OTHER OUTLET UNLESS THE BLADES —Consult the dealer or an experienced CAN BE FULLY INSERTED TO PREVENT This radio/TV technician for help. BLADE EXPOSURE. regu circu The supplied interface cable must be used • Re with the equipment in order to comply with • Bu the limits for a digital device pursuant to • Lig Subpart B of Part 15 of FCC Rules. (Thi stan, filename[C:\My Documents\_upload job\3075896111\3075896111DSCP7UC\02GB-DSCP7UC\02WAR.FM] masterpage:Left 01cov.book Page 4 Thursday, May 23, 2002 3:57 PM rademarks “Memory Stick,” , “MagicGate Memory Stick,” and , are trademarks of Sony Corporation. “MagicGate” and are trademarks of Sony Corporation. “InfoLITHIUM” is a trademark of Sony Corporation. Microsoft and Windows are registered trademarks of the U.S. Microsoft Corporation in the United States and other countries. Macintosh, Mac OS, and QuickTime, are trademarks or registered trademarks of Apple Computer, Inc. In addition, system and product names used in this manual are, in general, trademarks or registered trademarks of their respective developers or manufacturers. However, the ™ or ® marks are not used in all cases in this manual.

Attention for the Customers in T Europe •

This product has been tested and found compliant with the limits sets out on the EMC • Directive for using connection cables shorter than 3 meters. • The electromagnetic fields at the specific • frequencies may influence the picture and sound of this digital camera. • Notice If static electricity or electromagnetism causes data transfer to discontinue midway (fail), • restart the application or disconnect and connect the USB cable again. “Memory Stick” and battery pack

N50 For the Customers in the U.S.A.

and Canada THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. THIS CLASS B DIGITAL APPARATUS 4 COMPLIES WITH CANADIAN ICES-003., filename[C:\My Documents\_upload job\3075896111\3075896111DSCP7UC\02GB-DSCP7UC\02WAR.FM] masterpage:Right 01cov.book Page 5 Thursday, May 23, 2002 3:57 PM

Before using your camera

not get the camera wet n taking pictures outdoors in the rain or r similar conditions, be careful not to get amera wet. If moisture condensation rs, see page 95 and follow the uctions on how to remove it before using amera. power zoom lens camera is equipped with a power zoom . Be careful not to bump the lens, and be ful not to apply force to it. pictures used in this manual photographs used as examples of pictures is manual are reproduced images, and are ctual images shot using this camera. not aim the camera at the sun or er bright light may cause irrecoverable damage to your . k up recommendation void the potential risk of data loss, always (back up) data to a disk. Trial recording Do not shake or strike the camera Do Before you record one-time events, you may In addition to malfunctions and inability to Whe want to make a trial recording to make sure record images, this may render the “Memory unde that the camera is working correctly. Stick” unusable or image data breakdown, the c damage or loss may occur. occu No compensation for contents of the instr recording LCD screen, LCD finder (only models the c Contents of the recording cannot be with a LCD finder) and lens compensated for if recording or playback is • The LCD screen and the LCD finder are The not possible due to a malfunction of your manufactured using extremely high- This camera or recording medium, etc. precision technology so over 99.99% of the lens pixels are operational for effective use. care Notes on image data compatibility However, there may be some tiny black • This camera conforms with the Design rule points and/or bright points (white, red, blue The for Camera File system universal standard or green in color) that constantly appear on The established by the JEITA (Japan Electronics the LCD screen and the LCD finder. These in th and Information Technology Industries points are normal in the manufacturing not a Association). process and do not affect the recording in • Playback of images recorded with your any way. Do camera on other equipment and playback of • Be careful when placing the camera near a oth images recorded or edited with other window or outdoors. Exposing the LCD This equipment on your camera are not screen, the finder or the lens to direct eyes guaranteed. sunlight for long periods may cause malfunctions. Bac To a Precaution on copyright copy Television programs, films, video tapes, and other materials may be copyrighted. Unauthorized recording of such materials may be contrary to the provision of the copyright laws., filename[C:\My Documents\_upload job\3075896111\3075896111DSCP7UC\02GB-DSCP7UC\01covTOC.fm] masterpage:Left 01cov.book Page 6 Thursday, May 23, 2002 3:57 PM Before advanced operations ow to setup and operate your camera...52 Changing menu settings...52 Changing items in the SET UP screen ...52 Advanced still image shooting hoosing a focus method...53 Shooting with the AF lock using Center AF ...54 etting the distance to the subject (Focus preset) ...55 djusting the exposure (EV adjustment)...55 pot light-metering ...56 djusting color tones (White Balance)...57 hooting multiple frames (Clip Motion)...58 hooting in Multi Burst mode (Multi Burst) ...59 hooting still images for e-mail (E-MAIL) ...61 hooting still images with audio files (VOICE) ...61 dding special effects (Picture Effect) ...62

Table of contents

Before using your camera ... 5 Viewing still images Identifying the parts ... 8 Viewing images on the LCD screen of your H Getting started camera ... 32 Viewing single images ... 32 Charging the battery pack ... 10 Viewing Index Using an external power source... 14 (nine or three images display)... 33 Using your camera abroad ... 14 Viewing images on a TV screen... 34 Turning on/off your camera... 15 How to use the control button... 15 Deleting still images Setting the date and time... 16 C Deleting images ... 36 Shooting still images Deleting on the Index (nine images) screen ... 37 S Inserting and removing a Deleting on the Index “Memory Stick” ... 18 (three images) screen ... 38 A Deciding the still image size and quality 19 Formatting a “Memory Stick” ... 40 Basic still image shooting (using auto S adjustment mode) ... 22 Copying still images to your A Checking the last image shot computer S (Quick Review) ... 23 Using the zoom feature... 24 Copying still images to your computer .. 41 S Shooting close-ups (Macro)... 24 1 Installing the USB driver ... 42 Using the self-timer ... 25 2 Preparing your camera ... 43 S Selecting a flash mode... 26 3 Connecting your camera to your Shooting with the finder ... 28 computer ... 44 S Shooting with the date and time 4 Copying images... 45 inserted ... 29 5 Viewing the images on your A Shooting according to scene conditions computer ... 48 (Scene selection)... 30 For Macintosh users ... 51, filename[C:\My Documents\_upload job\3075896111\3075896111DSCP7UC\02GB-DSCP7UC\01covTOC.fm] masterpage:L1-Right 01cov.book Page 7 Thursday, May 23, 2002 3:57 PM

A

En Pla Ro

S

Pro Ch Ch

E

Sh Vie De dvanced still image viewing Editing movies ... 75 Cutting movies... 75 larging a portion of a still image...63 Deleting unnecessary portions of Enlarging an image movies ... 76 – Playback zoom...63 Copying movies to your computer ... 77 Recording an enlarged image For Windows 98, 98SE, 2000, Me – Trimming ...64 users... 77 ying back successive images For Windows XP users... 77 (Slide show)...64 For Macintosh users ... 78 tating still images...65 Troubleshooting till image editing Troubleshooting... 79 tecting images (Protect) ...66 Warnings and messages... 86 For the single screen ...66 Self-diagnostics display ... 87 For the Index (nine images) screen...66 For the Index (three images) screen...67 Additional information anging image size (Resize)...68 oosing images to print (Print mark)...69 The number of images that can be saved/ For the single screen ...69 shooting time... 88 For the Index (nine images) screen...69 Menu items ... 89 For the Index (three images) screen...70 SET UP items ... 93 Precautions... 95 njoying movies The “Memory Stick”... 96 The “InfoLITHIUM” battery pack ... 96 ooting movies...71 Specifications... 97 wing movies on the LCD screen ...72 The LCD screen... 99 leting movies ...73 Index ... 102 For the single screen ...73 For the Index (nine images) screen...73 For the Index (three images) screen...74, filename[C:\My Documents\_upload job\3075896111\3075896111DSCP7UC\02GB-DSCP7UC\03BAS.FM] masterpage:Left 01cov.book Page 8 Thursday, May 23, 2002 3:57 PM qa

Identifying the parts

Attaching the strap3APOWER button (15) • Use a tripod with a screw length of less than B POWER lamp (15) 5.5 mm (7/32 inch). You will be unable to firmly secure the camera to tripods having C Shutter button (22) longer screws, and may damage the camera. D Wrist strap hook • Do not touch the microphone while recording. E Flash (26) F Speaker (bottom surface) G Finder window H Self-timer lamp (26)/ AF illuminator (27, 93) I Microphone J Lens K Tripod receptacle (bottom surface), filename[C:\My Documents\_upload job\3075896111\3075896111DSCP7UC\02GB-DSCP7UC\03BAS.FM] masterpage:Right 01cov.book Page 9 Thursday, May 23, 2002 3:57 PM N Jack cover A/V OUT (MONO) jack (34)

O

18293qa 4 qs 5 qd 6 qf 7 qg A Control button G USB jack (44) (Menu on) (v/V/b/B/z) (15)/ H Mode dial (16) (Menu off) ( / /7/ ) (26/25/23/ SCN: To shoot in the Scene 24) selection mode B Finder (28) : To shoot still images Self-timer/recording : To view or edit images lamp (red) : To shoot movies /Clip Motion AE/AF lock lamp images/Multi Burst mode images (green) SET UP: To set the SET UP items /CHG /CHG lamp (orange) I Zoom button (for shooting) (24)/ (11, 26) Index button (for viewing) (33) J Battery/“Memory Stick” cover C LCD screen K RESET button (79) D DSPL/LCD ON/OFF button (28) L Access lamp (18) E DC IN jack (10, 14) M Battery eject lever (11) F MENU button (19), filename[C:\My Documents\_upload job\3075896111\3075896111DSCP7UC\02GB-DSCP7UC\04BAS.FM] masterpage:Left 01cov.book Page 10 Thursday, May 23, 2002 3:57 PM

Getting started

Jack cover DC plug 3 AC power adaptor

Open the jack cover, and

connect the AC-LS1A AC power adaptor (supplied) to the

DC IN jack of the camera.

pen the cover in the arrow direction as lustrated above. Connect the plug with the mark facing up. Do not short the DC plug on the AC power adaptor with a piece of metal. This may cause a malfunction. Clean the DC plug of the AC power adaptor with a dry cotton bud. Do not use the dirty plug. Use of the dirty plug may not properly charge the battery pack.

Charging the battery pack OPEN

2 Battery eject lever1 , Open the battery/“Memory , Insert the battery pack, and ,

Stick” cover. close the cover.

Slide the cover in the direction of the arrow. Insert the battery pack with the v mark facing toward the battery compartment as • When charging the battery pack, make illustrated above. Make sure the battery O sure the camera is not turned on pack is properly inserted, then close the (page 15). ilcover. • The camera operates only with the v “InfoLITHIUM” battery NP-FC10 battery pack (C type) (supplied). You cannot use any other • While pushing the battery eject lever down • battery pack (page 96). using the front edge of the battery pack, you can easily insert the battery pack. •,

Getting started

filename[C:\My Documents\_upload job\3075896111\3075896111DSCP7UC\02GB-DSCP7UC\04BAS.FM] masterpage:L1-Right 01cov.book Page 11 Thursday, May 23, 2002 3:57 PM attery remaining indicator he battery remaining indicator shows e remaining shooting or viewing me. 60min 2272 FINE , It takes about one minute that the proper remaining time is calculated when you Ch turn the LCD screen off and on. A proper remaining time may not be indicated depending on conditions of use or circumstances. Wh fin • Wpw2To a wall outlet To remove the battery pack (wall socket) B

T

Power cord (mains lead) th ti AC power adaptor

Connect the power cord (mains Battery eject lever

lead) to the AC power adaptor Open the battery/“Memory Stick” cover, and to a wall outlet (wall and push down the battery eject lever in the socket). arrow direction as illustrated above. • arging starts, and the /CHG lamp lights. • Make sure you do not drop the battery pack • when you remove it. /CHG /CHG lamp en the /CHG lamp goes out, charging is ished (full charge). hen charging is finished, disconnect the AC ower adaptor both from the camera and the all outlet (wall socket)., filename[C:\My Documents\_upload job\3075896111\3075896111DSCP7UC\02GB-DSCP7UC\04BAS.FM] masterpage:L1-Left-00 01cov.book Page 12 Thursday, May 23, 2002 3:57 PM C10 (supplied) ry life (min.) No. of images x. 70 Approx. 1400 x. 90 Approx. 1800 x. 70 Approx. 1400 x. 90 Approx. 1800 o. of images pprox. 3200 pprox. 3200 ne approximately every three seconds (supplied) ife (min.)

Cha Ch

Thi cha the in a tem Ba

NP Ba

im vie The for used Stan “ mod amb the The that cha nec slig con rging the battery pack (continued) arging time Shooting* still images s represents the time required to NP-FImage size LCD screen rge fully depleted battery pack using Batte supplied AC-LS1A AC power adaptor 2272×1704 ON ApproDSC-P9 n environment where the ambient 640×480 OFF Appro perature is 25°C (77°F). 2048×1536 ON Appro DSC-P7 640×480 ttery pack Full charge OFF Appro (min.) * Shooting one image approximately every three seconds -FC10 (supplied) Approx.150 Viewing** still images ttery life and the number of NP-FC10 (supplied)Image size ages that can be recorded/ Battery life (min.) N wed DSC-P9 2272×1704 Approx. 160 A tables show approximate guidelines 640×480 the length of time the camera can be DSC-P7 2048×1536 Approx. 160 A when image quality is set to 640×480 dard, when you shoot in Flash mode **With the LCD screen on, viewing single images in order, o ”, and when you shoot in Normal e in an environment where the Shooting*** movies ient temperature is 25°C (77°F), and supplied battery pack is fully charged. NP-FC10 LCD screen guidelines for the number of images Battery l can be recorded or viewed allow for ON Approx. 8 nging the “Memory Stick” as DSC-P9 essary. Actual results may differ OFF Approx. 1 htly from these, depending on the ON Approx. 8 ditions of use. DSC-P7 OFF Approx. 1 *** Continuous shooting with an image size of 160×112,

Getting started

filename[C:\My Documents\_upload job\3075896111\3075896111DSCP7UC\02GB-DSCP7UC\04BAS.FM] masterpage:L1-Right 01cov.book Page 13 Thursday, May 23, 2002 3:57 PM • en the POWER SAVE ction is activated e LCD screen will be darker than it is when WER SAVE] is set to [OFF]. You cannot nge the settings for [LCD BACKLIGHT] his time (page 94). en the power turns on, the Flash mode is rmally set to “ ” (No flash). ou want to shoot using the flash, press v on the control button, and select “ ” rced flash) or Auto (page 26). en shooting sill images, the focus only rks while the shutter button is pressed wn halfway. The battery life and the number of images The POWER SAVE function Wh recordable are decreased under the following fun conditions: When the POWER SAVE function is – At low temperatures. activated, you can shoot for a longer • Th – Using the flash. period of time. [PO – Turning on and off frequently. Set the mode dial to SET UP, and set cha – Using the zoom frequently. [POWER SAVE] in [SETUP 2] to [ON]. at t – When [POWER SAVE] is set to [OFF]. • WhThe factory setting is [ON] (page 94). – Using the battery pack used repeatedly or no self-discharged after charging (page 97). • If y ( ) (Fo • Wh wo do, filename[C:\My Documents\_upload job\3075896111\3075896111DSCP7UC\02GB-DSCP7UC\04BAS.FM] masterpage:L1-Left-01 01cov.book Page 14 Thursday, May 23, 2002 3:57 PM sing your camera broad ower sources ou can use your camera in any country or rea with the supplied AC power adaptor ithin 100 V to 240 V AC, 50/60 Hz. Use a ommercially available AC plug adaptor ], if necessary, depending on the design of e wall outlet (wall socket) [b]. AC-LS1A Do not use an electrical transformer. Using this may cause a malfunction. p

D

Conne up. • Conn acce some adap pulli ower adaptor (supplied) to the and to a wall outlet (wall •

C IN jack of the camera. socket).

ct the plug with the v mark facing • When you have finished using the AC power adaptor, disconnect it from the DC IN jack of the camera. ect the AC power adaptor to an easily • The set is not disconnected from the AC power ssible wall outlet (wall socket) close by. If source as long as it is connected to the wall thing goes wrong while you are using the outlet (wall socket) even if the set itself has tor, immediately shut off the power by been turned off. ng the plug out of the wall outlet.

Us

, O c ing an external power sourceUa2To a wall outlet P (wall socket) Y Power cord a Jack cover (mains lead) w c [a DC plug 1 th AC power adaptor 2 pen the jack cover, and , Connect the power cord (mains onnect the AC-LS1A AC lead) to the AC power adaptor,

Getting started

filename[C:\My Documents\_upload job\3075896111\3075896111DSCP7UC\02GB-DSCP7UC\04BAS.FM] masterpage:L1-Right-01 01cov.book Page 15 Thursday, May 23, 2002 3:57 PM

Turning on/off your camera How to use the

ntrol button 0EV 0EV EV WB ISO

AUTO

WHITE BAL ISO hange the current settings of the era, bring up the menu or the SET UP en (page 52), and use the control button ake the changes. each item, press v/V/b/B to select the red setting item, then press the center z /B to make the setting. The POW power is for the fi appears To turn Press PO goes out • If you tu set to SC Please b ER lamp lights in green, the • A cable is connected to the USB jack to m on. When you turn on your camera or the A/V OUT (MONO) jack For rst time, the CLOCK SET screen desi (see the next page). * When [POWER SAVE] is set to [ON]: or b approximately 90 seconds off the power When [POWER SAVE] is set to [OFF]: WER again, the POWER lamp approximately three minutes , and the camera turns off. rn the power on when the mode dial is N, , or the lens comes out. e careful not to touch the lens portion. , Pre pow co

The Auto Power Off

POWER function

POWER

ON/OFF(CHG) If no tasks are performed for a while* POWER lamp when shooting, viewing images, or setting up the camera while using the battery pack, power is automatically shut off to preserve battery power. However, in the following circumstances, even if the battery pack is being used to power the camera, the ss POWER to turn on the Auto Power Off function will not work. To c er. • Movies are being played back cam • A slide show is being played back scre, filename[C:\My Documents\_upload job\3075896111\3075896111DSCP7UC\02GB-DSCP7UC\04BAS.FM] masterpage:Left 01cov.book Page 16 Thursday, May 23, 2002 3:57 PM CLOCK SET Y/M/D M/D/Y D/M/Y 2002 / 1 / 1 12 : 00OK

AM CANCEL OK Select the desired order for the

date, the month and the year using v/V on the control button, then press the center z. ou can select from [Y/M/D] (year/month/ ay), [M/D/Y], and [D/M/Y]. If the rechargeable button battery, which provides the power for saving the time data, ever loses its charge (page 95), the CLOCK SET screen automatically reappears. If this happens, reset the date and time by following the above procedure, starting from Step 3.

Setting the date and time

Mode dial CLOCK SET Y/M/D M/D/Y D/M/Y 2002 / 1 / 1 12 : 00OK

AM CANCEL

POWER OK ON/OFF(CHG)

POWER

1 2 , Set the mode dial to . , Press POWER. ,

The POWER lamp lights in green and the

• You can also carry out this operation when the CLOCK SET screen appears. mode dial is set to SCN, , or . • To change values for the time and the date that have been previously set, set the mode dial to SET UP, select [CLOCK SET] in [SETUP 1] (page 93), then proceed from Step 3. Y d •,

Getting started

filename[C:\My Documents\_upload job\3075896111\3075896111DSCP7UC\02GB-DSCP7UC\04BAS.FM] masterpage:Right 01cov.book Page 17 Thursday, May 23, 2002 3:57 PM CLOCK SET Y/M/D M/D/Y D/M/Y 2002 / 7 / 4 10 : 30OK

PM CANCEL OK Select [OK] using the B on the

control button, then press the center z. r the date and time are set, the clock start to keep time. cancel the setting process, select ANCEL], then press the center z. CLOCK SET Y/M/D CLOCK SET Y/M/D M/D/Y M/D/Y D/M/Y D/M/Y 2002 / 1 / 1 12 : 00OK2002 / 7 / 1 12 : 00OKAM AM CANCEL CANCEL OK OK456, Select the year, month, day, , Set the desired numerical , hour, or minute item you want value using v/V on the control to set using b/B. button, then press the center z. A v will be shown above, andaVwill be Afte shown below the item currently selected to After setting the current numerical value, will be set. set the next item. Repeat the above process until all of the items have been set. • To [C • If you select [D/M/Y] in Step 3, use the 24- hour clock display., filename[C:\My Documents\_upload job\3075896111\3075896111DSCP7UC\02GB-DSCP7UC\05BAS.FM] masterpage:Left 01cov.book Page 18 Thursday, May 23, 2002 3:57 PM

Shooting still images

3 Access lamp

Close the battery/“Memory Stick” cover.

o remove the “Memory Stick” pen the battery/“Memory Stick” cover, en push the “Memory Stick” to pop it out. Whenever the Access lamp is lit, the camera is recording or reading out an image. Never remove the “Memory Stick” or turn off the power at this time.

Inserting and removing a “Memory Stick”

Connector side12Label side , Open the battery/“Memory , Insert the “Memory Stick.” ,

Stick” cover.

Insert the “Memory Stick” all the way in Slide the cover in the direction of the arrow. until it clicks as shown in the illustration. T

O

• Whenever you insert a “Memory Stick,” push it th all the way in until it clicks. If you do not insert it correctly, a proper recording or playback may • not be carried out.,

Shooting still images

filename[C:\My Documents\_upload job\3075896111\3075896111DSCP7UC\02GB-DSCP7UC\05BAS.FM] masterpage:Right 01cov.book Page 19 Thursday, May 23, 2002 3:57 PM

Deciding the still image size and quality FINE FINE STANDARD

P.QUALITY MODE PFX

Select (P. QUALITY) using

b/B on the control button.

Select the desired image

quality using v/V. image quality is set. n the setting is completed, press NU. The menu disappears from the en. r image quality, you can choose either NE] or [STANDARD]. e image size and quality values chosen here ll be preserved even when the camera is ned off. 2048x1536 2272x1704 2048 (3 : 2) 2272 (3 : 2) AUTO 1600x1200 1600x1200 1280 x 960 1280 x 960 WHITE BAL ISO 640 x 480 640 x 480 IMAGE SIZE IMAGE SIZE DSC-P7 DSC-P9 1 MENU23, Set the mode dial to , turn on , Select (IMAGE SIZE) using , the power, and then press b/B on the control button.

MENU. Select the desired image size

The menu appears. using v/V. The image size is set. The • You can also carry out this operation when the Whe mode dial is set to SCN.

ME

scre • Fo [FI • Th wi tur, filename[C:\My Documents\_upload job\3075896111\3075896111DSCP7UC\02GB-DSCP7UC\05BAS.FM] masterpage:L1-Left-00 01cov.book Page 20 Thursday, May 23, 2002 3:57 PM age size Examples 72×1704 Very fine prints SC-P9) 72 (3:2) 3:2 prints* SC-P9) 48×1536 Very fine prints SC-P7) 48 (3:2) 3:2 prints* SC-P7) 00×1200 Printing A4 size images 80×960 Printing postcard size images 0×480 For images to be attached to e-mail his option records images in a horizontal to ertical proportion of 3:2 to match the size of he print paper used.

Dec Im

You pixe ratio wan ima ima also to p can Stic iding the still image size and quality (continued) age size and quality Choose an image size and quality level Im can choose image size (number of appropriate for the kind of images you 22 ls) and image quality (compression want to shoot. (D ) based on the kind of images you You can resize the images later (Resize 22 t to shoot. The larger you make the function, see page 68). (D ge size and the higher you make the 20 ge quality, the better your image, but You can choose image size from among (D the larger the amount of data needed the five options in the following tables. 20 reserve your image. This means you (D save fewer images in your “Memory 16 k.” * T v t,

Shooting still images

filename[C:\My Documents\_upload job\3075896111\3075896111DSCP7UC\02GB-DSCP7UC\05BAS.FM] masterpage:L1-Right-00 01cov.book Page 21 Thursday, May 23, 2002 3:57 PM e image size is the screen size used when wing the images on a computer. When the ges are viewed on the LCD screen of the era, they all look the same size. mber of shooting images can differ from se values according to shooting ditions. e image size value (e.g., 1600×1200) is the ber of pixels displayed.

The n

The nu (Units Image 2272× 2272 ( 2048× 2048 ( 1600× 1280× 640×4 ** Whe For othe umber of images** that can be saved in a “Memory Stick” • Th vie mber of images that can be saved in FINE (STANDARD) mode are shown below. ima : number of images) cam Capacity • Nu 8MB 16MB 32MB 64MB 128MB the size con 1704 (DSC-P9) 4 (7) 8 (14) 16 (30) 32 (60) 65 (121) • Th num 3:2) (DSC-P9) 4 (7) 8 (14) 16 (30) 32 (60) 65 (121) 1536 (DSC-P7) 5 (9) 10 (18) 20 (36) 40 (74) 82 (148) 3:2) (DSC-P7) 5 (9) 10 (18) 20 (36) 40 (74) 82 (148) 1200 8 (15) 16 (30) 32 (60) 64 (120) 133 (246) 960 12 (23) 24 (44) 50 (93) 100 (186) 202 (375) 80 48 (120) 96 (240) 195 (488) 393 (983) 789 (1973) n [REC MODE] is set to [NORMAL] the number of images that can be saved in r modes, see page 88., filename[C:\My Documents\_upload job\3075896111\3075896111DSCP7UC\02GB-DSCP7UC\05BAS.FM] masterpage:Left 01cov.book Page 22 Thursday, May 23, 2002 3:57 PM ent mode) 60min 2272 FINE F2.8 Flashes in greent3Remains on

Press and hold the shutter

button halfway down. he camera beeps. When the AE/AF lock dicator stops flashing and remains on, the amera is ready for shooting. If you release your finger from the shutter button, shooting will be canceled. The minimum focal distance to a subject is 50 cm (19 11/16 inches) when the zoom is set all the way to the W side and 60 cm (23 5/8 inches) when the zoom is set all the way to the T side. To shoot subjects at distances closer than this, use the Macro mode (page 24). The frame appearing on the LCD screen shows the limits of the area where the focus will be adjusted. (For more details on the AF range finder, see page 53.)

Basic still image shooting (using auto adjustm

Mode dial12, Set the mode dial to , and , Hold your camera with your , turn on your camera. both hands and position a subject in the center of the

T

• The lens cover opens when the power is turned frame to focus on. on. in • Do not touch the lens portion while it is Do not cover the lens or flash with your c operating, such as when you press POWER to fingers. turn on the power or when the zoom function is • working (page 24). • When the mode dial is set to , the exposure • You can choose either Multipoint AF mode or • and focus are adjusted automatically. Center AF as the AF mode (page 53). •,

Shooting still images

filename[C:\My Documents\_upload job\3075896111\3075896111DSCP7UC\02GB-DSCP7UC\05BAS.FM] masterpage:L1-Right-01 01cov.book Page 23 Thursday, May 23, 2002 3:57 PM

Checking the last image

t (Quick Review) 60min 2272 8/8

REVIEW

100-0029 20027410:30PM

Press b (7) on the control

button. background is poor eturn to shooting mode, press the ter button lightly or press b (7) on the rol button again. elete the image displayed on the screen ress MENU to display the menu. ress B on the control button to select DELETE], then press the center z. ress v on the control button to select OK], then press the center z. he image will be deleted. The shut complete the “Mem lamp goe image. • When y no tasks camera off to pr ter clicks, the shooting is To r d, and the still image is saved in • The subject is seen through glass, such as shut ory Stick.” When the Recording a window cont • A fast-moving subject s out, you can shoot the next • The subject has a reflection, such as that from a mirror, or there is a luminous body To d and a lustrous subject LCD ou are shooting with the battery pack, if • A flashing subject. are performed for a while with the1Pturned on, power is automatically shut2Peserve battery power (page 15). [ 3 P [

T

, Pre dow sho 60min 2272 FINE About Auto Focus When you try to shoot a subject that is hard to focus on, the AE/AF lock indicator will change to flashing slowly. The Auto Focus function may be difficult to use with in the following subjects. In such cases, release the shutter button, then try to recompose the shot and focus again. ss the shutter button fully • The subject is distant from the camera and , n. dark • The contrast of the subject and its, filename[C:\My Documents\_upload job\3075896111\3075896111DSCP7UC\02GB-DSCP7UC\05BAS.FM] masterpage:Left 01cov.book Page 24 Thursday, May 23, 2002 3:57 PM hooting close-ups (Macro) or close-ups of small subjects like flowers r insects, shoot using the Macro feature. ou can use this feature for close-ups of bjects up to the distances specified below. hen the zoom is set all the way toeWside: approximately 10 cm 15/16 inches) from the end of the lens hen the zoom is set all the way toeTside: approximately 60 cm 3 5/8 inches) from the end of the lens

Using the zoom feature S

W (wide-angle) T (telephoto) Digital zoom 60min 2272 FINE 60min 2272 FINEWT4WT4When the zoom exceeds 3×, enlargement is carried out using digital processing of the image. The image can then be enlarged up to 6× using the digital zoom feature. When the digital zoom feature is used, image quality deteriorates. When this feature is not needed, set [DIGITAL ZOOM] to [OFF] in the SET UP settings , Press the zoom button to (page 93). F choose the desired zoom o position, and shoot your The T side of this line shows Y image. the extent of digital zoom su

W The minimum distance neededWTth

to focus on a subject (3 When the zoom is set all the way to W the W side: approximately 50 cm th (19 11/16 inches) from the end of the lens • When you are using digital zoom, you (2 When the zoom is set all the way to cannot confirm the image using the finder.• When you are using the digital zoom the T side: approximately 60 cm feature, the auto focus frame is not (23 5/8 inches) from the end of the lens displayed. • The lens portion moves when the zoom feature is being used. Be very careful not to touch the lens portion. • The zoom feature cannot be used while 24 shooting movies (page 80).,

Shooting still images

filename[C:\My Documents\_upload job\3075896111\3075896111DSCP7UC\02GB-DSCP7UC\05BAS.FM] masterpage:L1-Right-01 01cov.book Page 25 Thursday, May 23, 2002 3:57 PM

Using the self-timer

60min 2272 FINE

Set the mode dial to , and

press V ( ) on the control button. Self-timer) will appear on the LCD en. he menu is currently displayed, press MENU st to make the menu disappear. u can also carry out this operation when the de dial is set to SCN or . (Mac • If the m first to m • You can mode di Landsca To return to normal shooting ro) will appear on the LCD screen. Press B ( ) on the control button again. ( disappears from the LCD screen. scre enu is currently displayed, press MENU ake the menu disappear. • Use the LCD screen to shoot when using the • If t carry out this operation even when the Macro feature. If you use the finder, the limits fir al is set to SCN (other than the of what you see and what you actually shoot • Yo pe mode) (page 30) or . may be different. mo , Set pre but 60min 2272 FINE 60min 2272 FINE21the mode dial to , and , Center the subject in the frame, , ss B ( ) on the control and shoot the image. ton., filename[C:\My Documents\_upload job\3075896111\3075896111DSCP7UC\02GB-DSCP7UC\05BAS.FM] masterpage:Left 01cov.book Page 26 Thursday, May 23, 2002 3:57 PM The recommended distance using the flash is as follows (when [ISO] is set to [AUTO]): – When the zoom is set all the way to the W side, 0.5 to 3.8 m (19 11/16 inches to 12 feet 5 19/32 inches). – When the zoom is set all the way to the T side, 0.6 to 2.4 m (23 5/8 inches to 7 feet 10 1/2 inches). If the menu is currently displayed, press MENU first to make the menu disappear. You can change the brightness of the flash using [FLASH LEVEL] in the menu settings (page 91). In the Auto or (Forced flash) mode, you look at the LCD screen in a dark place, you may notice some “noise” in the image, but this will have no effect on the image you shoot. While the flash is being charged, the /CHG lamp flashes. After charging is completed, the lamp goes out.

Using the self-timer Selecting a flash mode

(continued) • 60min FINE 60min 2272 FINE2272440EV F2.8 • 2 • • , Center the subject in the frame, , Set the mode dial to , and and press the shutter button press v ( ) on the control fully down. button repeatedly to select a • flash mode. The Self-timer lamp (page 8) will flash in orange, and you will hear a beeping sound. The flash mode has the following features. The image will be shot after approximately 10 seconds. No indicator (Auto): Based on the lighting conditions, the camera will decide To cancel the self-timer during the if there is enough light, and will use the operation flash accordingly. Press V ( ) on the control button again. (Forced flash): The flash will be used regardless of the amount of ambient light. • If you stand in front of the camera and press the (No flash): The flash will not be used. shutter button, the focus and the exposure may not be correctly set.,

Shooting still images

filename[C:\My Documents\_upload job\3075896111\3075896111DSCP7UC\02GB-DSCP7UC\05BAS.FM] masterpage:L1-Right-02 01cov.book Page 27 Thursday, May 23, 2002 3:57 PM AF illuminator light misses the center of image somewhat, the camera will focus perly as long as it reaches the subject. hen the focus is adjusted manually, the AF minator does not function. the following Scene selection modes ge 30), the AF illuminator will not ction. hen shooting in Twilight mode hen shooting in Landscape mode e AF illuminator is a bright light. There no safety hazards, but when shooting at rt distances, do not aim it directly at the ject’s eyes.

To re

shoo

The fla

to redu [RED the SE appear • The a varie addit wheth strob reduc reduc m 60min 2272 FINE

ON

mount of red-eye reduction possible • Even when the AF illuminator flashes, but s according to the individual. In sufficient light does not reach the subject (the ion, the distance to the subject, and recommended distance for this feature is up er or not the subject has seen pre- to 2.8m (9 feet 2 1/4 inches) (wide), 1.6m e light begin to strobe may also (5 feet 3 inches) (tele), or the subject has e the effectiveness of the red-eye weak contrast, the camera may not focus tion process. properly. duce “red-eye” when Shooting with the AF • If ting live subjects illuminator the pro sh pre-strobes before shooting This is additional lighting provided to • W ce the red-eye phenomenon. Set assist in focusing when shooting in dark illu

EYE REDUCTION] to [ON] in places. • In T UP settings (page 93). “ ” Set [AF ILLUMINATOR] (page 93) to (pa

fun s on the LCD screen. [AUTO] in the SET UP settings. If you – W try to shoot under insufficient lighting – W conditions, “ ON” appears on the LCD • Th screen; the AF illuminator will flash are automatically during the time between sho when the shutter button is pressed sub halfway down and the focus locks., filename[C:\My Documents\_upload job\3075896111\3075896111DSCP7UC\02GB-DSCP7UC\05BAS.FM] masterpage:Left 01cov.book Page 28 Thursday, May 23, 2002 3:57 PM

Shooting with the finder

All of the indicators are turned off (only the shooting information is displayed) Finder F2.8 DSPL/LCD ON/OFF r The LCD screen is turned off. r All of the available indicators

The finder is convenient when you want to are turned on.

save battery power, or when it is difficult to 60min 2272 FINE confirm the image using the LCD screen. F2.8

Each time you press DSPL/LCD ON/OFF, 30

the display changes in the following order. • For details on the items displayed, see page 99. • Just as with the AE/AF lock indicator on the LCD screen, when the AE/AF lock lamp of the finder section stops flashing and remains on, you can start shooting (page 22). • When the LCD screen is turned off, the digital zoom does not function (page 24). • When the LCD screen is turned off, if you press (Flash mode)/ (Self-timer)/ (Macro), the image will be displayed on the screen for approximately two seconds so you can check or change the setting.,

Shooting still images

filename[C:\My Documents\_upload job\3075896111\3075896111DSCP7UC\02GB-DSCP7UC\05BAS.FM] masterpage:Right 01cov.book Page 29 Thursday, May 23, 2002 3:57 PM

Shooting with the date and CAMERA

MOVING IMAGE : MPEG MOVIE DATE/TIME : DATE DIGITAL ZOOM : O N RED EYE REDUCTION : OFF AF ILLUMINATOR : AUTO PAGE SELECT

Select the type of data to be

inserted using v/V on the control button, then press the center z. &TIME: Inserts the date and the time ooting into the image

E: Inserts the year, the month and the

of shooting into the image : Does not insert date/time data into the ge r the setting has been completed, set the e dial to , and continue your ting. u can also carry out this operation when the de dial is set to SCN. e settings made here will be saved even when power is turned off. time inserted CAMERA CAMERA MOVING IMAGE : MPEG MOVIE MOVING IMAGE : DAY&TIME DATE/TIME : OFF DATE/TIME : DATE DIGITAL ZOOM : O N DIGITAL ZOOM : OFF RED EYE REDUCTION : OFF RED EYE REDUCTION : AF ILLUMINATOR : AUTO AF ILLUMINATOR : SELECT OK123, Set the mode dial to SET UP. , Select (CAMERA) using v/V ,

The SET UP screen is displayed. on the control button and

press B. • When images are shot with the date and time Select [DATE/TIME] using v/V inserted, the date and time cannot be removed and press B. later. DAY • When shooting images with the date and time of sh inserted, the actual date and time are not DAT displayed on the LCD screen, instead, “ ” is date displayed in the upper left portion of the LCD OFF screen. The actual date and time are displayed when the image is played back. ima • When you chose [DATE] in Step 3, the date will be inserted in the order set in “Setting the Afte date and time” (page 16). mod shoo • Yo mo • Th the, filename[C:\My Documents\_upload job\3075896111\3075896111DSCP7UC\02GB-DSCP7UC\05BAS.FM] masterpage:Left 01cov.book Page 30 Thursday, May 23, 2002 3:57 PM 0EV 0EV SCN EV WB

MENU Set the mode dial to SCN, and

press MENU. he menu appears.

Shooting according to scene conditions

(Scene selection) Twilight mode Twilight portrait mode Landscape mode , When shooting at night, shooting people at Twilight portrait mode night, or shooting landscapes, use the Use this mode when shooting people in the modes listed below to increase the quality foreground at night. T of your images. Because the shutter speed is slow, it is recommended that you use a tripod.

Twilight mode • Allows you to shoot images of people in the foreground with distinct outlines without losing

Under dark lighting conditions, you can the feeling that you are shooting at night. shoot using the Twilight mode, and still get • The flash automatically strobes. good images. However, because the shutter speed is slower under these conditions, we Landscape mode recommend you use a tripod. Focuses on images far away, so is • The flash cannot be used. convenient for shooting landscapes at a distance. • You cannot shoot in Macro mode. • The flash auto mode cannot be selected.,

Shooting still images

filename[C:\My Documents\_upload job\3075896111\3075896111DSCP7UC\02GB-DSCP7UC\05BAS.FM] masterpage:Right 01cov.book Page 31 Thursday, May 23, 2002 3:57 PM

R slow shutter

Twilight or Twilight portrait mode, hen the shutter speed value slower or ual to than a 1/2 second is selected, R” is displayed before the shutter eed indication, and the camera tomatically changes to the NR slow utter mode. e NR slow shutter mode removes noise om recorded images, providing clear ages. To eliminate the effects of bration, use of a tripod is recommended. Press the shutter F2.8 button fully down. NR2'' r Then the screen turns black.

CAPTURING

r Finally, when “PROCESSING” PROCESSING disappears, the image has been recorded.

N

In w eq SCN WB SCN WB “N sp au sh23Th , Select [SCN] using b/B on the , Select the desired mode using fr control button. v/V on the control button. im vi The mode will be set to your choice. When the setting is completed, press MENU. The menu disappears from the screen. To cancel the Scene selection Set the mode dial to something other than SCN. • The settings made here will be saved even when the power is turned off., filename[C:\My Documents\_upload job\3075896111\3075896111DSCP7UC\02GB-DSCP7UC\06BAS.FM] masterpage:L1-Left-01 01cov.book Page 32 Thursday, May 23, 2002 3:57 PM

Viewing still images

iewing single images 60min 2272 8/8 100-0028 20027410:30PM FILE BACK/NEXT VOLUME

Set the mode dial to , and

turn on the power. he last image you shot will be displayed. three Singl You c occup Index Nine i simult screen Index Three simult screen will a methods for viewing your images. T e (single image display) an view one image at a time, ying the entire screen. (nine images display) mages will be displayed aneously in separate panels on the . (three images display) images will be displayed aneously in separate panels on the . Various items of image information lso be displayed.

Vie

cam Si (s You c camer screen wing images on the LCD screen of your V era ngle Index Index ingle image display) (nine images display) (three images display) 60min 2272 8/8 APERTURE VALUE : F2.8 SHUTTER SPEED : 1/125 EXPOSURE VALUE : 0.0 ISO : 100 100-0028 20027410:30PM 100-0028 20027410:30PM FILE BACK/NEXT VOLUME • SINGLE DISPLAY • SINGLE DISPLAY an see the images you shoot with this • For movies, see page 72. a almost immediately on the LCD • For information on the various symbols , . This camera offers the following displayed, see page 101.,

Viewing still images

filename[C:\My Documents\_upload job\3075896111\3075896111DSCP7UC\02GB-DSCP7UC\06BAS.FM] masterpage:L1-Right-02 01cov.book Page 33 Thursday, May 23, 2002 3:57 PM

Viewing Index (nine or three images display)

APERTURE VALUE : F2.8 SHUTTER SPEED : 1/125 EXPOSURE VALUE : 0.0 ISO : 100 100-0028 20027410:30PM • SINGLE DISPLAY

Press the zoom W button once

more. images) screen. display switches to the Index (three ges) screen. n you press v/V on the control button, emaining image information is layed. display the previous (next) Index een s b/B on the control button. return to the Single image screen eatedly press the zoom T button, or s the center z on the control button. , Sel on b : Disp B : Disp lays the previous image. The lays the next image. ima To display the previous (next) Index Whe screen the r Press v/V/b/B on the control button to disp move the yellow frame up/down/left/right. To scr Pres To Rep pres 60min 2272 6/8 100-0026 20027410:30PM FILE BACK/NEXT VOLUME • SINGLE DISPLAY ect a still Image using b/B , Press the zoom W button once. , the control button. The display switches to the Index (nine, filename[C:\My Documents\_upload job\3075896111\3075896111DSCP7UC\02GB-DSCP7UC\06BAS.FM] masterpage:L1-Left-01 01cov.book Page 34 Thursday, May 23, 2002 3:57 PM 60min 2272 8/8 100-0028 20027410:30PM FILE BACK/NEXT VOLUME

Set the mode dial to , and

turn on the camera. ress b/B on the control button to select an age. When using this feature, it may be necessary to switch the video output signal to match that of your TV system (page 94). (M th th If you conne conne • Conn came that b

ONO) jack of the camera to toggle switch of the TV to P

e audio/video input jacks of “Video.” im e TV set. • Depending on your TV set, the name and • r TV has stereo type input jacks, location of this switch may be different. ct the audio plug (black) of the A/V cting cable to the Lch jack. ect the A/V connecting cable to the ra and the TV set only after confirming oth are turned off.

Vie

A/V , U c wing images on a TV screen OUT (MONO) jack A/V connecting cable (supplied) 2 TV/Video toggle switch sing the A/V connecting , Turn on the power of the TV , able, connect the A/V OUT set, and set the TV/Video, Viewing still images filename[C:\My Documents\_upload job\3075896111\3075896111DSCP7UC\02GB-DSCP7UC\06BAS.FM] masterpage:L1-Right-01 01cov.book Page 35 Thursday, May 23, 2002 3:57 PM Peru, S the U. PAL s Austra Czech Germa Kuwai Norwa Repub Thaila PAL-M Brazil urinam, Taiwan, the Philippines, S.A., Venezuela, etc. ystem lia, Austria, Belgium, China, Republic, Denmark, Finland, ny, Holland, Hong Kong, Italy, t, Malaysia, New Zealand, y, Portugal, Singapore, Slovak lic, Spain, Sweden, Switzerland, nd, United Kingdom, etc. system Watch

TV

If you onaTinput j The co same a Check

NTSC

Baham Centra Ecuad ing the playback picture on PAL-N system Argentina, Paraguay, Uruguay want to view the playback picture V, you need a TV having a video SECAM system ack and a video connecting cable. Bulgaria, France, Guiana, Hungary, Iran, lor system of the TV must be the Iraq, Monaco, Poland, Russia, Ukraine, s that of your digital still camera. etc. the following list: system a Islands, Bolivia, Canada, l America, Chile, Colombia, or, Jamaica, Japan, Korea, Mexico,, filename[C:\My Documents\_upload job\3075896111\3075896111DSCP7UC\02GB-DSCP7UC\07BAS.FM] masterpage:Left 01cov.book Page 36 Thursday, May 23, 2002 3:57 PM

Deleting still images

60min 2272 5/5

DELETE

O K

CANCEL OK Select [OK] using v on the

control button, then press the center z. MEMORY STICK ACCESS” appears on e screen. When this message disappears, e image has been deleted. o cancel the deletion elect [CANCEL] using V on the control utton, then press the center z.

Deleting images

60min 2272 60min 2272 5/5 5/5 100-0028 20027410:30PM DELETE PROTECT PRINT SLIDE FILE BACK/NEXT VOLUME OK

MENU

1 2 , Set the mode dial to , and , Press MENU. , turn on the camera. Select [DELETE] using b/B on

Select an image to be deleted the control button, then press

using b/B on the control the center z. “ button. The image has not yet been deleted at this th point. th

T S

b, Deleting still images filename[C:\My Documents\_upload job\3075896111\3075896111DSCP7UC\02GB-DSCP7UC\07BAS.FM] masterpage:Right 01cov.book Page 37 Thursday, May 23, 2002 3:57 PM Deleting on the Index (nine images) screen • SET MENU TO NEXT Select the image you want to delete using v/V/b/B on the control button, then press the center z. mark is placed on the selected ge. At this point, the image has not yet deleted. Put the mark on all of the ges you want to delete. cancel your selection, press the centerzemore time. DELETE PROTECT PRINT DELETE CANCEL SELECT ALL

MENU

123, While an Index (nine images) , Select [SELECT] using b/B on , screen (page 33) is displayed, the control button, then press press MENU. the center z. Select [DELETE] using b/B on the control button, then press To delete all the images the center z. Select [ALL] using b/B on the control The button, then press the center z. Next, select ima [OK], then press the center z. To cancel the been deletion, select [EXIT], then press the ima center z. • To on, filename[C:\My Documents\_upload job\3075896111\3075896111DSCP7UC\02GB-DSCP7UC\07BAS.FM] masterpage:L1-Left-02 01cov.book Page 38 Thursday, May 23, 2002 3:57 PM es) screen

PRINT PROTECT DELETE

100-0028 20027410:30PM • OK

MENU Press MENU. Select [DELETE] using the V

on the control button, then press the center z. t this point, the image has not yet been eleted.

Dele

ima , P

S

c c When disapp To ca Select button ontrol button, then press the move the image you want to enter z. delete to the center using b/B on the control button. “MEMORY STICK ACCESS” A ears, the images have been deleted. d ncel the deletion [EXIT] using b on the control , then press the center z. ting on the Index (nine Deleting on the Index (three imag ges) screen (continued) APERTURE VALUE : F2.8 SHUTTER SPEED : 1/125 EXPOSURE VALUE : 0.0 ISO : 100 100-0028 20027410:30PM DELETE EXIT OK • SINGLE DISPLAY ress MENU. , While an Index (three images) , elect [OK] using b/B on the screen (page 33) is displayed,,

Deleting still images

filename[C:\My Documents\_upload job\3075896111\3075896111DSCP7UC\02GB-DSCP7UC\07BAS.FM] masterpage:L1-Right-01 01cov.book Page 39 Thursday, May 23, 2002 3:57 PM When “M disappea To canc Select [C button, t EMORY STICK ACCESS” rs, the image has been deleted. el the deletion ANCEL] using V on the control hen press the center z. , Sel con cen

DELETE

O K

CANCEL

100-0028 20027410:30PM • OK ect [OK] using v on the trol button, then press the ter z., filename[C:\My Documents\_upload job\3075896111\3075896111DSCP7UC\02GB-DSCP7UC\07BAS.FM] masterpage:Left 01cov.book Page 40 Thursday, May 23, 2002 3:57 PM

FORMAT

ALL DATA WILL BE ERASED READY? O K

CANCEL OK Select [OK] using v/V on the

control button, then press the center z. he “FORMATTING” message appears. hen this message disappears, the format complete.

Formatting a “Memory Stick”

SETUP 1 FORMAT : OK FILE NUMBER : CANCEL /LANGUAGE : CLOCK SET :

OK

1 2 , Insert the “Memory Stick” you , Select (SETUP 1) using v/V , want to format into the camera. on the control button.

Set the mode dial to SET UP, Select [FORMAT] using B,

and turn on the power. then, press B.

T Select [OK] using v/V, then W

• The term “formatting” means preparing a press the center z. is “Memory Stick” to record images; this process is also called “initialization.” The “Memory Stick” provided with this camera, and those To cancel the formatting available commercially, are already formatted, and can be used immediately. Select [CANCEL] using V on the control • When you format a “Memory Stick,” be button, then press the center z. aware that all of the images in the “Memory Stick” will be permanently deleted.,

Copying still images to your computer

filename[C:\My Documents\_upload job\3075896111\3075896111DSCP7UC\02GB-DSCP7UC\08BAS.FM] masterpage:Right 01cov.book Page 41 Thursday, May 23, 2002 3:57 PM

Copying still images to your computer Copying still images to your computer

erations are not guaranteed for all the ommended environments mentioned above.

B mode

re are two modes for a USB connection, RMAL] and [PTP] modes. The factory ng is the [NORMAL] mode. This ion describes the USB connection using NORMAL] mode. mmunication with your puter (for Windows users y) u recover your computer from the end or sleep mode, communication een your camera and your computer not recover at the same time. en a USB connector is not vided on your computer n neither a USB connector nor a mory Stick” slot is provided, you can images using an additional device. See ony Website for details. ://www.sony.net/ Follow the steps below to copy the images An OS installed at the factory (not • Op you shot to your computer. upgraded) is required for correct rec operations. We cannot guarantee

Steps required by your OS operations for operating systems not US

(Operating System) listed above. The CPU: MMX Pentium 200 MHz or faster [NO OS Steps USB connector: setti Windows 98/98SE/2000/ Steps 1 to 5 Provided as standard equipment sect Me (pages 42 to 46, the [ 48) Recommended Macintosh environment Windows XP Steps 2 to 5 OS: Mac OS 8.5.1, 8.6, 9.0, 9.1, 9.2, or (pages 43, 44, 46 CoMac OS X (v10.0/v10.1) to 48) An OS installed at the factory is com Mac OS 8.5.1/8.6/ Page 51 required for correct operations. For onl 9.0/9.1/9.2, the following models, update your If yo Mac OS X (v10.0/v10.1) OS to Mac OS 9.0 or 9.1. susp • Step 1 may be unnecessary depending on your – iMac with Mac OS 8.6 installed at betw OS. the factory, and a slot loading type may • After you complete the installation of the USB CD-ROM drive driver, Step 1 is unnecessary. – iBook or Power Mac G4 with the Wh Mac OS 8.6 installed at the factory

Recommended computer proUSB connector:

environment Provided as standard equipment Whe “Me Recommended Windows environment OS: Microsoft Windows 98, Windows • If you connect two or more USB devices to copy 98SE, Windows 2000 Professional, your computer at one time, some devices, the S including your camera, may not work, http Windows Millennium Edition, depending on the type of USB device. Windows XP Home Edition, or • Operations are not guaranteed when using a Windows XP Professional USB hub., filename[C:\My Documents\_upload job\3075896111\3075896111DSCP7UC\02GB-DSCP7UC\08BAS.FM] masterpage:Left 01cov.book Page 42 Thursday, May 23, 2002 3:57 PM 3 Click here

Click [Next]. When the

“Information” window appears, click [Next]. he USB driver installation starts. When e installation is completed, the window forms you of completion. Eject the CD- OM. 1 Installing the USB driver Click here Opening window12, Turn on your computer, and , Click [USB Driver] on the , insert the supplied CD-ROM opening window. into the CD-ROM drive. The “InstallShield wizard” window appears. Do not connect your camera to T your computer at this time. th in The opening window appears. If it does not R appear, double-click (My Computer) t (ImageMixer) in order. • This section describes how to establish a USB connection using Windows Me as an example. Required operations may be different depending on your OS. • Shut down all other applications before installation of the driver. • When you are using Windows 2000, log on as Administrator.,

Copying still images to your computer

filename[C:\My Documents\_upload job\3075896111\3075896111DSCP7UC\02GB-DSCP7UC\08BAS.FM] masterpage:L1-Right-02 01cov.book Page 43 Thursday, May 23, 2002 3:57 PM 2 Preparing your camera

POWER

ON/OFF(CHG)

Turn on your computer and

camera. , Clic com [Fin Your com establish • You can Sony” s comput [PIXEL window succeed • Be sure “PIXEL Click [D succeed when th camera and the AC power puter restarts. Then, you can the USB connection. adaptor, and plug the adaptor into a wall outlet (wall socket). use the “PIXELA ImageMixer for oftware to copy images to your • For further details on the AC power adaptor, see er. To install this software, click page 14. A ImageMixer], on the opening • For further details on the “Memory Stick,” see , then follow instructions on each page 18. ing window. to install DirectX when using the A ImageMixer for Sony” software. irectX] and follow instructions on each ing window. Your computer restarts e installation is completed. To a wall outlet (wall socket) “Memory Stick” AC power 2 adaptor12k[Yes, I want to restart my , Insert the “Memory Stick” with , puter now], then click the images you want to copy ish]. into the camera. Connect the, filename[C:\My Documents\_upload job\3075896111\3075896111DSCP7UC\02GB-DSCP7UC\08BAS.FM] masterpage:Left 01cov.book Page 44 Thursday, May 23, 2002 3:57 PM 3 Connecting your camera to your computer USB MODE

NORMAL

aaaa12, Connect the supplied USB “USB MODE NORMAL” appears on the cable to your camera. Then, LCD screen of your camera. When a USB connect the other end of the connection is established for the first time,

USB cable to your computer. your computer automatically runs the used

program to recognize your camera. Wait for • When using a desktop computer, connect the a while. USB cable to the USB connector on the rear panel. • If “USB MODE NORMAL” does not appear, • When using Windows XP, the copy wizard confirm that [USB CONNECT] is set to automatically appears on the desktop. Proceed [NORMAL] in the SET UP settings (page 94). to page 46.,

Copying still images to your computer

filename[C:\My Documents\_upload job\3075896111\3075896111DSCP7UC\02GB-DSCP7UC\08BAS.FM] masterpage:Right 01cov.book Page 45 Thursday, May 23, 2002 3:57 PM 4 Copying images ( pages 46 to 48)

Drag and drop the image files

into the “My Documents” folder. image files are copied to the “My uments” folder. hen you try to copy an image to a folder in ich an image with the same file name is red, the overwrite confirmation message pears. When you want to overwrite the isting image with the new one, click [Yes]. hen you do not want to overwrite it, click o], then change the file name. 123, Double-click [My Computer], , Double-click [DCIM], then , then double-click [Removable double-click [100MSDCF].

Disk].

The “100MSDCF” folder opens. The contents of the “Memory Stick” The inserted in your camera appear. • The “100MSDCF” folder contains the image Doc files you shot using your camera. • The folder names vary depending on the type of • This section describes an example of copying • W images they contain (page 49). images to the “My Documents” folder. wh • When the “Removable Disk” icon does not sto appear, see the next page. ap • You can use the “PIXELA ImageMixer for ex Sony” software to copy images to your W computer. For details, see the software’s help [N files., filename[C:\My Documents\_upload job\3075896111\3075896111DSCP7UC\02GB-DSCP7UC\08BAS.FM] masterpage:L1-Left-02 01cov.book Page 46 Thursday, May 23, 2002 3:57 PM 2 Click here

Click [Next].

he images stored in the “Memory Stick” re displayed.

Wh

ico1Rc

T

a2Ci3IadTry usin bove, follow the steps below to Microsoft Scanner and Camera elete them. aWizard] window, then click Click [ Sony DSC] or [ [OK]. Sony Handycam]. Click [Delete]. The “Scanner and Camera Wizard” window The “Device deletion appears. confirmation” window appears. Click [OK]. • When following the steps on page 44, the copy The device is deleted. wizard appears on the desktop of your computer. the USB driver installation again g the supplied CD-ROM (page 42). en a removable disk 4 Copying images n is not shown ight-click [My Computer], then 1 lick [Properties]. he “System Properties” window ppears. onfirm if other devices are already nstalled. Click [Device Manager]. Confirm if there is a [ Sony 2 DSC] or [ Sony Handycam] 1 with a mark in [ Other Devices]. , Click [Copy pictures to a folder , f you find either of the devices on my computer using

T

, Copying still images to your computer filename[C:\My Documents\_upload job\3075896111\3075896111DSCP7UC\02GB-DSCP7UC\08BAS.FM] masterpage:Right 01cov.book Page 47 Thursday, May 23, 2002 3:57 PM Click [Nothing. I’m finished working with these pictures], then click [Next]. “Completing the Scanner and Camera ard” window appears. 1122345, Click to remove the , Specify the image file names to , checkmark from any images be copied and the copy you do not want to copy to destination, then click [Next]. your computer, then click Copying of the images starts. When the task The [Next]. is completed, the “Other Options” window Wiz The “Picture Name and Destination” appears. window appears. • Here the “My Documents” folder is used as a copy-to folder for explanation., filename[C:\My Documents\_upload job\3075896111\3075896111DSCP7UC\02GB-DSCP7UC\08BAS.FM] masterpage:L1-Left-02 01cov.book Page 48 Thursday, May 23, 2002 3:57 PM on your computer

Double-click the desired image

file. he image file opens. 4 C (con , C The w • Whe imag recon Step The “My Documents” folder opens. T n you want to continue copying other es, disconnect the USB cable once and • This section describes the steps followed for nect it. Then, follow the process from copying images to the “My Documents” folder 1. on pages 45 and 46. • When using Windows XP, click [Start]t[My Documents] in that order. • You can use the “PIXELA ImageMixer for Sony” software to view images on your computer. For details, see the software’s help files. opying images 5 Viewing the images tinued) Click here 1 lick [Finish]. , Double-click [My Documents] , on the desktop. izard window closes.,

Copying still images to your computer

filename[C:\My Documents\_upload job\3075896111\3075896111DSCP7UC\02GB-DSCP7UC\08BAS.FM] masterpage:L1-Right-02 01cov.book Page 49 Thursday, May 23, 2002 3:57 PM file names still image/Clip Motion/ image data E-mail mode image data movie data VOICE mode audio data

Rem

from “Mem came conn ForW1Do 2 Cli [Sto 3 Con con [OK 4 Cli Thi Wi 5 Dis rem For W Carry ndows XP users. Folder containing connect the USB cable or ove the “Memory Stick.” Folder containing indows 98 or 98SE users out only Step 5 above. Folder containing oving the USB cable Image file storage destinations and your computer or the ory Stick” from your The image files recorded with your camera ra during a USB are grouped as folders in the “Memory ection Stick,” depending on the recording modes. indows 2000, Me, or XP users Example: when viewing folders on uble-click on the task tray. Windows Me ck (Sony DSC), then click p]. firm the device on the firmation window, then click ]. Folder containing ck [OK]. Multi Burst mode s step is unnecessary for, filename[C:\My Documents\_upload job\3075896111\3075896111DSCP7UC\02GB-DSCP7UC\08BAS.FM] masterpage:L1-Left-00 01cov.book Page 50 Thursday, May 23, 2002 3:57 PM e 58) ORMAL mode 58) OBILE mode age 61) Ima Fold 100M

IMC MOM MOM

Note • The ss • The – A – A – A ge file storage destinations and file names (continued) er File name File meaning SDCF DSC0ssss.JPG • Still image files shot normally • Still image files shot in – E-MAIL mode (page 61) – VOICE mode (page 61) – Multi Burst mode (page 59) CLP0ssss.GIF • Clip Motion files shot in NORMAL mode (pag CLP0ssss.THM • Index image files of Clip Motion files shot in N MBL0ssss.GIF • Clip Motion files shot in MOBILE mode (page MBL0ssss.THM • Index image files of Clip Motion files shot in M IF100 DSC0ssss.JPG • Small-size image files shot in E-MAIL mode (p L0001 MOV0ssss.MPG • Movie files shot normally (page 71) LV100 DSC0ssss.MPG • Audio files shot in VOICE mode (page 61) on the table meanings of the file names are as above: ss stands for any number within the range from 0001 to 9999. numerical portions of the following files are the same. small-size image file shot in E-MAIL mode and its corresponding image file n audio file shot in VOICE mode and its corresponding image file n image file shot with Clip Motion and its corresponding index image file,

Copying still images to your computer

filename[C:\My Documents\_upload job\3075896111\3075896111DSCP7UC\02GB-DSCP7UC\08BAS.FM] masterpage:Right 01cov.book Page 51 Thursday, May 23, 2002 3:57 PM

For Macintosh users

rag and drop the image files to the hard isk icon. he image files are copied to your hard isk.

Viewing the images on your

puter ouble-click the hard disk icon. ouble-click the desired image file in he folder containing the copied files. he image file opens. u can use the “PIXELA ImageMixer for ny” software to copy images to your mputer and view the images on your mputer. To install the software, insert the plied CD-ROM into the CD-ROM drive, n click the installer icon to select the desired guage under “PIXELA ImageMixer” on the ening window and follow the instructions on h window. For details, see the software’s lp files. Follow the steps below, according to your 6 When the message for confirmation is4DOS. shown, click [OK]. d OS Steps 7 Restart your computer. T d Mac OS 8.5.1/8.6/9.0 Steps 1 to 5 Mac OS 9.1/9.2/ Steps 2 to52Preparing your camera Mac OS X (v10.0/v10.1) For details, see page 43. 5 com 1 Installing the USB driver 3 Connecting your camera to1D(For Mac OS 8.5.1, 8.6, or 9.0 users your computer2Donly) For details, see page 44. t 1 Turn on your computer, and set the T supplied CD-ROM into the CD-ROM Removing the USB cable from your drive. computer or the “Memory Stick” from • Yo The “PIXELA ImageMixer” window your camera during a USB connection So co appears. Drag and drop the drive icon of the co “Memory Stick” to the “Trash” icon, then sup 2 Double-click (Setup Menu). remove the USB cable or “Memory Stick.” the 3 Click (USB Driver). lan The “USB Driver” window appears. * If you are using Mac OS X, remove the USB op cable, etc., after you have turned your computer 4 eacDouble-click the icon of the hard disk off. he containing the OS to open the window. 5 Drag and drop the following two files 4 Copying images from the window opened in Step 3 into the System Folder icon in the window 1 Double-click the newly recognized icon opened in Step 4. on the desktop. • Sony USB Driver The contents of the “Memory Stick” • Sony USB Shim inserted in your camera appear. 2 Double-click [DCIM]. 3 Double-click [100MSDCF]., filename[C:\My Documents\_upload job\3075896111\3075896111DSCP7UC\02GB-DSCP7UC\09ADV.FM] masterpage:Left 01cov.book Page 52 Thursday, May 23, 2002 3:57 PM

Before advanced operations

b Select the setting item you

How to setup and ∞ want to change using v/V/b/B

7.0m operate your camera 3.0m1.0m on the control button. 0.5m CENTER AF The frame of the item you select will This section describes the most frequently MULTI AFFOCUS WB ISO turn yellow. used menus and the SET UP screen. Control button SETUP 2 LCD BRIGHTNESS : c Select the desired setting LCD BACKLIGHT : SHUTTER MENU BEEP : O Nusing v/V on the control VIDEO OUT : OFFUSB CONNECT : Mode dial button. POWER SAVE :

OK

The frame of the selected setting will turn yellow, and the setting will be c Press the center z on the made. control button to enter the

To turn off the menu display setting.

Press MENU.

Changing menu settings To turn off the SET UP screen

a Press MENU. Changing items in the SET display Set the mode dial to anything other than

UP screen

The menu appears. SET UP. a Set the mode dial to SET UP. 0EV The SET UP screen appears.

CAMERA

0EV MOVING IMAGE : MPEG MOVIE EV WB ISO DATE/TIME : OFF DIGITAL ZOOM : O N RED EYE REDUCTION : OFF AF ILLUMINATOR : AUTO b Select the setting item you want to change using b/B on SELECT the control button. The letters and symbols of the item you select will turn yellow.,

Advanced still image shooting

filename[C:\My Documents\_upload job\3075896111\3075896111DSCP7UC\02GB-DSCP7UC\10ADV.FM] masterpage:Right 01cov.book Page 53 Thursday, May 23, 2002 3:57 PM

Advanced still image shooting

c Select 9 (FOCUS) using b/B, • When you are shooting movies (MPEG movie) d you choose Multipoint AF, the distance to center of the screen is estimated as an erage, so the AF works even with a certain ount of vibration. The Center AF tomatically focuses only on the center of the age, so it is convenient when you want to us only on what you aim at. hen you use Digital zoom or AF illuminator, ority AF movement is given to subjects in or ar the center of the frame. In this case, the AF ge finder is not displayed.

Choosing a focus then select [MULTI AF] or an

method the[CENTER AF] using v/V. av The focus is adjusted automatically. am

Mode dial: /SCN/ The color of the AF range finder frame au

changes from white to green. im

Multipoint AF foc

• W The AF range finder frame widens. Multipoint AF pri ne 60min 2272 FINE

Center AF 4 ran

The AF range finder frame is only the center of the frame. a Set the mode dial to either ,

SCN, or .

Center AF b Press MENU. 60min 2272 FINE The menu appears. 4, filename[C:\My Documents\_upload job\3075896111\3075896111DSCP7UC\02GB-DSCP7UC\10ADV.FM] masterpage:Left 01cov.book Page 54 Thursday, May 23, 2002 3:57 PM

Return to the fully composed

shot, and press the shutter button fully down. The shutter clicks, the image will be recorded with the proper focus for the human subjects. 60min 2272 FINE F2.8 You can carry out the AF lock adjustment process before you press the shutter button fully down.

Shooting with the AF lock a Compose the shot so that the b

using Center AF subject is centered in the AF range finder, and press the Even if it is difficult to focus in Center AF shooting because the subject is not in the shutter button halfway down. center of the frame, you can focus in this First, the focus for the subject you are situation using the AF lock. For example, aiming at will be adjusted. When the when you are shooting two human subjects, AE/AF lock indicator stops flashing and there is a gap between them, the camera and remains on, and there is a beeping may focus on the background visible in the sound, focus adjustment is completed. gap. In a case like this, use AF lock to 60min 2272 FINE ensure the subjects are in correct focus. 4 F2.8 Shutter button 125 • AF range finder AE/AF lock indicator • When you are using AF lock, you can capture an image with the correct focus even if the subject is at the edge of the frame.,

Advanced still image shooting

filename[C:\My Documents\_upload job\3075896111\3075896111DSCP7UC\02GB-DSCP7UC\10ADV.FM] masterpage:Right 01cov.book Page 55 Thursday, May 23, 2002 3:57 PM You can select from the following justing the posure

V adjustment

de dial: /SCN/ d when you want to change the matic exposure to one of your own ce. The value can be set over a range +2.0EV to –2.0EV, in 1/3EV ements.

Set the mode dial to , SCN,

or .

Press MENU.

The menu appears.

Select (EV) using b/B.

The value of the exposure adjustment is displayed. 0EV 0EV EV WB ISO

Setting the distance distance settings. Ad

to the subject 0.5m, 1.0m, 3.0m, 7.0m, ∞ (unlimited ex distance) – Focus preset – E

Mode dial: /SCN/ ∞ 1.0m7.0m Mo

3.0m When shooting an image using a previously 1.0m0.5m Use CENTER AF set distance to the subject, or when shooting MULTI AF auto a subject through a net or through window FOCUS WB ISO choi glass, it is difficult to get the proper focus in from auto focus mode. This is when use of the To return to auto focus mode incr Focus preset is convenient. Press MENU again, select 9 (FOCUS), a then select [MULTI AF] or [CENTER AF]. Control button • Focal point information may not show the exact b MENU distance. Mode dial • If you point the lens up or down, the error increases. c • If focus preset value flashes with [0.5m] selected, press the zoom W button until the value stops flashing. a Set the mode dial to , SCN, or . b Press MENU. The menu appears. c Select 9 (FOCUS) using b/B, then select the distance to the subject using v/V., filename[C:\My Documents\_upload job\3075896111\3075896111DSCP7UC\02GB-DSCP7UC\10ADV.FM] masterpage:Left 01cov.book Page 56 Thursday, May 23, 2002 3:57 PM pot light-metering ode dial: /SCN/ hen there is backlight, or the background f the subject provides a very high contrast, ou can adjust the focus to that most ppropriate for your subject. You can aim at particular point, and meter the light to djust the focus for that point. Control button

MENU

Mode dial Shutter button

Set the mode dial to , SCN,

or .

Press MENU.

The menu appears. d Select the exposure adjustment value. Shooting techniques S In normal shooting, the camera makes Select the exposure adjustment value automatic exposure adjustments. Check the / Musing v V. image to be shot, if it looks like the image Make your adjustment while below, you should make manual adjustments. W confirming the brightness of the If you are shooting a back-lit person oraobackground of the subject on the LCD snowy scene, make your adjustments in the + y screen. plus direction; if you are shooting a dark a subject that fills the screen, making your adjustments in the – direction should give the a

To return to auto adjust mode best results. a

Return the exposure adjustment value to 0EV. • When the subject is extremely bright or extremely dark, or when you are using the flash, the adjustment may not work. Inadequate exposure t Adjust in the + direction a Appropriate exposure b Overexposed t Adjust in the – direction, Advanced still image shooting filename[C:\My Documents\_upload job\3075896111\3075896111DSCP7UC\02GB-DSCP7UC\10ADV.FM] masterpage:Right 01cov.book Page 57 Thursday, May 23, 2002 3:57 PM c Select (SPOT METER) (Incandescent) sed when shooting, for example, at a rty, where the lighting conditions ange often sed in a studio, or under video lights sed when shooting under sodium or ercury lights Set the mode dial to , SCN, or . Press MENU. The menu appears. Select [WB] (WHITE BAL) using b/B, then select the desired setting using v/V. return to automatic settings tep 3, select [AUTO]. der fluorescent lights that flicker, even if you oose , the overall color of the image may w differences from the actual color. hen the flash is triggered, the manual setting cancelled, and the shooting of the image is ne in AUTO mode. using b/B, then select [ON] Adjusting color tones • U using v/V. pa– White Balance ch The Spot light-metering aiming point is displayed. Mode dial: /SCN/ • U When shooting images using automatic • U features, the white balance is set m automatically in response to the condition a Spot light- of the subject, and the overall color balance ON metering OFF is adjusted accordingly. When you want to aiming point WB SPOT METER ISO fix the conditions under which the image is b captured, or when shooting under special d Aim the Spot light-metering lighting conditions, you can select the c aiming point at the spot you settings manually. want to shoot, then shoot your AUTO (no display) image. The white balance is adjusted automatically. To To cancel Spot light-metering In S In Step 3, select [OFF]. The Spot light- (Daylight) metering aiming point disappears, and the Used when shooting outdoors, and for • Un camera returns to normal light-metering. shooting at night, under neon lights, for ch fireworks, sunrises and sunsets. sho • W is (Cloudy) do Used when shooting under a cloudy sky. (Fluorescent) Used when shooting under fluorescent lights., filename[C:\My Documents\_upload job\3075896111\3075896111DSCP7UC\02GB-DSCP7UC\10ADV.FM] masterpage:Left 01cov.book Page 58 Thursday, May 23, 2002 3:57 PM efore operation et [MOVING IMAGE] to [CLIP

OTION] in the SET UP settings (pages

2, 93). Control button

MENU

Mode dial Shutter button

Set the mode dial to . Press MENU. The menu appears. Select (IMAGE SIZE) using

b/B, then select the desired mode using v/V.

B Shooting techniques Shooting multiple S

The color of the subject that you see will be M captured according to the lighting frames conditions. Under the bright summer sun, 5 everything will appear bluish, under a light – Clip Motion sources like a light bulb, white objects will appear reddish. The human eye has an Mode dial: excellent ability to adjust. Even when You can shoot a number of still images lighting conditions change, the eye can consecutively (GIF animation). Because the adjust and recognize the correct color almost file size is small, these images are ideal for instantly. However, digital still cameras are use on a home page, or for attaching to an e- greatly influenced by light. Normally, this camera adjusts automatically, but if you mail message. notice that the color of the entire image seems to be a bit unnatural when replaying • Clip Motion images are restricted to color an image on the LCD screen, it is levels of 256 colors and below. This is a recommended that you adjust the white characteristic of GIF format recording. For this balance. reason, the image quality of some images may deteriorate. a

NORMAL (160×120) The maximum number of frames you can b

shoot in one Clip Motion shot is 10. This is the best choice for use on a home page. c

MOBILE (120×108) Two frames is the maximum number that

can be shot in Clip Motion in this mode. • MOBILE mode has strict file size limits, so picture quality falls accordingly. • For the number of images you can record using Clip Motion, see page 88.,

Advanced still image shooting

filename[C:\My Documents\_upload job\3075896111\3075896111DSCP7UC\02GB-DSCP7UC\10ADV.FM] masterpage:Right 01cov.book Page 59 Thursday, May 23, 2002 3:57 PM d Shoot one frame. • If you do not complete Step 6, the image will ooting in Multi rst mode ulti Burst de dial: sing the shutter button once records 16 es in a row. This is convenient for king your form in sports, for example. can set the interval between frames g the menu. not be saved in the “Memory Stick.” Up to that Sh point, the image is saved temporarily in the camera. Bu • In Clip Motion mode, the date and time will not MAKING “CLIP MOTION” be recorded. – M • When you view Clip Motion images using the Index screen, the images may appear different Mo from the actual image recorded. Pres • GIF files made on other cameras may not e Shoot the next frame. framdisplay correctly on this camera. chec Press the shutter button once to shoot You the next frame, then repeat this usin operation until you have shot the desired number of frames. f Press the center z. All of the frames will be saved in the “Memory Stick.”

To delete shot images in the

midst of shooting 1 In Steps 4 or 5, press b (7). Shot images will be played back in order, playback stops when the last image is reached. 2 Press MENU, and select either [DELETE LAST] or [DELETE ALL], then press the center z. 3 Select [OK], then press the center z. If you chose [DELETE LAST] in Step 2, repeat Steps 1 to 3 to delete the images in order, from the latest one shot., filename[C:\My Documents\_upload job\3075896111\3075896111DSCP7UC\02GB-DSCP7UC\10ADV.FM] masterpage:Left 01cov.book Page 60 Thursday, May 23, 2002 3:57 PM When Multi Burst images are played back on a camera without the Multi Burst feature, the 16 frames will all be displayed at the same time, as part of one image, just as they are on a computer. For the number of images that can be recorded, see page 88. The flash cannot be used. The date and time cannot be inserted. Before operation (For information on NTSC/PAL, see • Set [MOVING IMAGE] to [MULTI page 92.) BURST] in the SET UP settings (pages 52, 93). 1/30 Control button • 1/7.5 MENU 1/15 1/30 • Mode dial WB INTERVAL • Shutter button d Press the shutter button. 16 frames will be recorded as one image (image size: 1280×960).

To delete shot images

When using this mode, you cannot delete a Set the mode dial to . only certain frames. When you delete b Press MENU. images, all 16 of the frames are deleted at the same time. The menu appears. 1 Set the mode dial to . c Select (INTERVAL) using 2 Press MENU and select [DELETE], then b/B, then select the desired press the center z. between-frame interval using 3 Select [OK], then press the center z. v/V. All of the frames are deleted. You can choose the between-frame interval from among the following. • When you play back images recorded in Multi NTSC: 1/7.5 sec., 1/15 sec., 1/30 sec. Burst mode, the 16 frames will be played back PAL: 1/6.3 sec., 1/12.5 sec., 1/25 sec. in order, with a fixed interval between them. • When the images are played back on a computer, the 16 frames you shot will all be displayed at the same time as part of one image., Advanced still image shooting filename[C:\My Documents\_upload job\3075896111\3075896111DSCP7UC\02GB-DSCP7UC\10ADV.FM] masterpage:Right 01cov.book Page 61 Thursday, May 23, 2002 3:57 PM

Shooting still images Shooting still images

for e-mail with audio files – E-MAIL –VOICE Mode dial: /SCN Mode dial: /SCN You can shoot images and save them in a You can shoot still images with audio files. file that is small enough to attach to an e- a Set the mode dial to or mail message. The normal mode image that was selected using the (IMAGE SIZE) SCN. item (page 19) is also recorded. b Press MENU. a Set the mode dial to , or The menu appears. SCN. c Select [MODE] (REC MODE) b Press MENU. using b/B, then select [VOICE] The menu appears. using v/V. c Select [MODE] (REC MODE) d Shoot your image. using b/B, then select [E- If you press and release the MAIL] using v/V. shutter button, sound is recorded for five seconds. d Shoot your image. If you hold down the shutter button, sound is recorded until you To return to normal mode release the shutter button for up to 40 In Step 3, select [NORMAL]. seconds. • For instructions on how to attach your images To return to normal mode to an e-mail message, refer to the Help files of In Step 3, select [NORMAL]. the e-mail software you are using. • To view images recorded in VOICE mode, carry out the same procedure described in “Viewing movies on the LCD screen” (page 72)., filename[C:\My Documents\_upload job\3075896111\3075896111DSCP7UC\02GB-DSCP7UC\10ADV.FM] masterpage:Left 01cov.book Page 62 Thursday, May 23, 2002 3:57 PM

Adding special effects Control button MENU

– Picture Effect Mode dial

Mode dial: /SCN/

You can add special effects to bring out the contrast in your images. SOLARIZE B&W a Set the mode dial to , SCN, or . Like an illustration In black and white with clearly delineated b Press MENU. bright and dark The menu appears. portions c Select [PFX] (P.EFFECT) using SEPIA NEG.ART b/B, then select the desired mode using v/V.

To cancel Picture Effect

In Step 3, select [OFF]. Colored to look like an Made to look like a old photograph negative image,

Advanced still image viewing

filename[C:\My Documents\_upload job\3075896111\3075896111DSCP7UC\02GB-DSCP7UC\11ADV.FM] masterpage:Right 01cov.book Page 63 Thursday, May 23, 2002 3:57 PM

Advanced still image viewing Enlarging an image e Press the zoom T button

repeatedly, the portion of the image selected in Step 4 will be enlarged. cancel enlarged viewing s the center z. u cannot use Playback zoom with movies PEG movie), or images recorded in Clip tion/Multi Burst modes. you press the zoom W button when you are wing images that have not been enlarged, the ex screen will appear (page 33). e images displayed in Quick Review ge 23) can be enlarged using the procedures tlined in Steps 3 to 5.

Enlarging a portion of – Playback zoom

a still image a Set the mode dial to .

Mode dial: b Display the image you want to

You can enlarge an image up to five times enlarge. the size of the original image. You can also record the enlarged image as a new file. c Press the zoom T button to Control button enlarge the image. d Press v/V/b/B repeatedly to Mode dial select a portion of the image to Zoom button enlarge. Press v To Pres • Yo Press Press (MbBMo • If vie Ind • Th Press V (pa v: To view a portion of the top of the ou image V: To view a portion of the bottom of the image b: To view a portion of the left side of the image B: To view a portion of the right side of the image, filename[C:\My Documents\_upload job\3075896111\3075896111DSCP7UC\02GB-DSCP7UC\11ADV.FM] masterpage:Left 01cov.book Page 64 Thursday, May 23, 2002 3:57 PM Select [SLIDE] using b/B, then press the center z. Select an interval from those listed below. INTERVAL settings 3 sec/5 sec/10 sec/30 sec/1 min

REPEAT

ON:Plays the images back repeatedly. OFF:Plays through the images one time and then stops. Select [START] using v/V/b/B, then press the center z. The slide show begins. o cancel the Slide show setting Step 3, select [CANCEL]. o stop the playback of the Slide how ress the center z, select [EXIT] using B, en press the center z. Recording an enlarged c image – Trimming Playing back a After you have viewed an successive images image using playback zoom, – Slide show press MENU. Mode dial: b Select [TRIMMING] using B, You can play back recorded images in then press the center z. succession, one after another. This is useful for checking your images, or for givingacSelect the image size using v/ presentation. V, then press the center z. Control button The image is recorded, and the screen d image returns to the size it was before MENU enlargement. Mode dial • The trimmed image is recorded as the newest T file, and the original image is retained. • The trimmed image may suffer some In deterioration in image quality • You cannot trim an image using the 3:2 image T size. s

P

a Set the mode dial to . th b Press MENU. The menu appears.,

Advanced still image viewing

filename[C:\My Documents\_upload job\3075896111\3075896111DSCP7UC\02GB-DSCP7UC\11ADV.FM] masterpage:Right 01cov.book Page 65 Thursday, May 23, 2002 3:57 PM

Skip to the next/previous image a Set the mode dial to , and

display the image you want to rotate.

Press MENU.

The menu appears.

Select [ROTATE] using b/B,

then press the center z.

Select using v/V, and

rotate the image using b/B.

Select [OK] using v/V, then

press the center z. cancel the rotation tep 4, select [CANCEL]. tected images, movies (MPEG movie), or ages recorded in Clip Motion/Multi Burst des cannot be rotated. ages shot on other cameras may not rotate rrectly on this camera. hen viewing images on a computer, the age viewing software used may not handle rotation information correctly. Press the B (next), or the b (previous). Rotating still images • The interval settings are just guidelines. The Mode dial: actual intervals differ, based on factors like the Images shot when holding the camera b size of the image. vertically can be rotated and displayed horizontally. cde

To

In S • Pro im mo • Im co • W im the, filename[C:\My Documents\_upload job\3075896111\3075896111DSCP7UC\02GB-DSCP7UC\11ADV02.FM] masterpage:Left 01cov.book Page 66 Thursday, May 23, 2002 3:57 PM Still image editing or the Index (nine images) creen Set the mode dial to , press the zoom W button once to switch to the Index (nine images) screen appears. Press MENU. The menu appears Select [PROTECT] using b/B, then press the center z. Select [SELECT] using b/B, then press the center z. Select the image you want to protect using v/V/b/B, then press the center z. A - (Protect) mark is placed on the selected image. • SET MENU TO NEXT For the single screen F

Protecting images

a Set the mode dial to . s – Protect b Display the image you want to a Mode dial: protect using b/B. To prevent accidental erasure of an important image, you can protect it. c Press MENU. The menu appears. b Control button d Select [PROTECT] using b/B, MENU then press the center z. c Mode dial The image currently being displayed is now protected, and a - (Protect) mark is shown on the screen. d 60min 2272 5/5 e DELETE PROTECT PRINT SLIDE

OK

To cancel the protection In Step 4, press the center z again. The - mark disappears., Still image editing filename[C:\My Documents\_upload job\3075896111\3075896111DSCP7UC\02GB-DSCP7UC\11ADV02.FM] masterpage:Right 01cov.book Page 67 Thursday, May 23, 2002 3:57 PM f To protect other images, For the Index (three images) To release protection tep 4, select the image from which want to release protection, and press the er z. To release protection from all of r images, repeat this process for each of . repeat Step 5. screen In S you g Press MENU. a Set the mode dial to , press cent The menu appears. the zoom W button twice to you h Select [OK] using the B, then switch to the Index (three them press the center z. images) screen. The selected image is protected. b Move the image you want to protect to the center using b/ To cancel the protection B. Select [CANCEL] in Step 4 or select [EXIT] in Step 8. c Press MENU. The menu appears To release protection d Select [PROTECT] using v/V, In Step 5, using v/V/b/B, select an then press the center z. image for which you want to release protection, and press the center z. Repeat The center image is protected, and a - (Protect) mark is placed on that this operation for all the images for which image. you want to release protection. Then, press MENU, select [OK], and press the center z.

PRINT PROTECT

To protect all your images DELETE In Step 4, select [ALL], then press the 100-0005 20027410:30PM• OK center z. Next, select [ON], then press the center z. e To protect other images, move the image you want to protect To release all protection to the center using b/B, and In Step 4, select [ALL], and press the repeat Step 4. center z. Then select [OFF], and press the center z., filename[C:\My Documents\_upload job\3075896111\3075896111DSCP7UC\02GB-DSCP7UC\11ADV02.FM] masterpage:Left 01cov.book Page 68 Thursday, May 23, 2002 3:57 PM c Press MENU.

Changing image size The menu appears

– Resize d Select [RESIZE] using b/B,

Mode dial: then press the center z.

You can change the size of your images, e Select the new size using v/V, and record them as new files. then press the center z. You can change your images to the The resized image is recorded as the following sizes. newest file. 2272×1704 (DSC-P9 only), 2048×1536 (DSC-P7 only), 1600×1200, 1280×960, To cancel the resizing 640×480 In Step 5, select [CANCEL]. After the resizing is finished, the original image is retained. • Movies (MPEG movie), or images recorded in Clip Motion/Multi Burst modes cannot be Control button resized. • When images are resized from a smaller to a MENU larger size, the image quality will deteriorate. • 3:2-sized images cannot be resized. Mode dial • If you try to resize a 3:2-sized image, black bands will appear at the top and bottom of the image. a Set the mode dial to . b Select the image for which the size is to be changed using b/

B.

,

Still image editing

filename[C:\My Documents\_upload job\3075896111\3075896111DSCP7UC\02GB-DSCP7UC\11ADV02.FM] masterpage:Right 01cov.book Page 69 Thursday, May 23, 2002 3:57 PM

For the single screen For the Index (nine images)

een

Set the mode dial to and

press the zoom W button once to switch to the Index (nine images) screen.

Press MENU.

The menu appears.

Select [PRINT] using b/B, then

press the center z.

Select [SELECT] using b/B,

then press the center z. • You cannot select [ALL].

Select the images you want to

print using v/V/b/B, then press the center z. A (Print) mark is placed on the selected image. • SET MENU TO NEXT

To print other images, repeat Step 5 for each of them. Choosing images to

a Set the mode dial to . scrprint b Display the image you want to a – Print mark print using b/B.

Mode dial:

c Press MENU. You can designate certain images to be printed. The menu appears. b This is convenient when you want to have d Select [PRINT] using b/B, then images printed in shops that follow DPOF press the center z. (Digital Print Order Format) specifications. cA (Print) mark is placed on this image. • Print marks cannot be placed on movies (MPEG movie) or images recorded in Clip 60min 2272 d5/5 Motion mode. • In E-MAIL mode, the Print mark will be placed on the normal size image that was recorded at the same time. DELETE PROTECT PRINT SLIDE e • You can place a print mark on images shot OK using Multi Burst mode; all the images will be printed on one sheet divided into 16 panels.

To delete the Print mark

In Step 4, press the center z again. The mark disappears. f, filename[C:\My Documents\_upload job\3075896111\3075896111DSCP7UC\02GB-DSCP7UC\11ADV02.FM] masterpage:Left 01cov.book Page 70 Thursday, May 23, 2002 3:57 PM o delete a Print mark Step 4, press the center z again. he mark disappears. g Press MENU. For the Index (three images) T The menu appears screen In h Select [OK] using B, then Ta Set the mode dial to , press press the center z. the zoom W button twice to The setting of the mark is switch to the Index (three completed. images) screen. To delete a Print mark b Move the image you want to In Step 5, select an image using v/V/b/ print to the center using b/B. B, and press the center z. c Press MENU. To delete all the Print marks The menu appears. placed on all of your images d Select [PRINT] using v/V, then In Step 4, select [ALL], then press the press the center z. center z. Next, select [OFF], then press the A (Print) mark is placed on the center z. center image. To cancel the Print mark In Step 4, select [CANCEL], or select

PRINT

[EXIT] in Step 8. PROTECT

DELETE

100-0005 20027410:30PM • OK e To print other images, move the image you want to print to the center using b/B, and repeat Step 4.,

Enjoying movies

filename[C:\My Documents\_upload job\3075896111\3075896111DSCP7UC\02GB-DSCP7UC\12ADV.FM] masterpage:Right 01cov.book Page 71 Thursday, May 23, 2002 3:57 PM

Enjoying movies

c Select (IMAGE SIZE) using Indicators on the screen while are shooting movies se indicators are not recorded. h time you press DSPL/LCD ON/OFF, tatus of the LCD screen changes as ws: Indicators OFF t LCD OFF t cators ON. See page 100 for a detailed ription of the indicated items. shoot close-ups (Macro) the mode dial to and follow the edure on page 24. shoot with a self-timer the mode dial to and follow the edure on page 25. u cannot use a flash. u cannot write the date and time on the age. u cannot use the zoom while shooting vies.

Shooting movies b/B, and select the desired you Mode dial: mode using v/V.

The You can choose from 320 (HQX), Eac You can shoot movies (MPEG movies). 320×240, or 160×112. the s See page 88 for the recording time follo

Before operation allowed for each screen size. Indi

Set [MOVING IMAGE] to [MPEG desc d Press the shutter button fully MOVIE] in the SET UP settings (pages 52, 93). down. To “RECORDING” appears on the screen Control button Set and the camera starts recording the proc MENU image. Mode dial 60min 160 To REC0:01[ 5:28] Shutter button Set proc • Yo • Yo • When the capacity of the “Memory Stick” im is used up, recording stops. • Yo DSPL/LCD ON/OFF • For details on the recording time for mo movies, see page 88. a Set the mode dial to . e Press the shutter button fully b Press MENU. down again to stop recording. The menu appears., filename[C:\My Documents\_upload job\3075896111\3075896111DSCP7UC\02GB-DSCP7UC\12ADV.FM] masterpage:Left 01cov.book Page 72 Thursday, May 23, 2002 3:57 PM dicators on the screen while ou are viewing movies ach time you press DSPL/LCD ON/OFF, e status of the LCD screen changes as llows: Indicators OFF t LCD OFF t dicators ON. See page 101 for a detailed escription of the indicated items. The procedure for viewing movies on a TV is the same as that for viewing still images (page 34). c Press the center z. In

Viewing movies on The movie images and sound are y

the LCD screen played back. E B (playback) appears on the LCD th

Mode dial: screen while a movie is playing back. fo

You can view movies on the LCD screen of In60min 160 the camera and hear sounds from the 6/80:02 d speaker of the camera. • Control button Playback bar MOV00001 20027410:30PM STOP REV/CUE VOLUME Mode dial

To stop playback

Press the center z.

To adjust the volume

Press v/V.

To rewind / fast-forward

a Set the mode dial to . Press b/B while playing back a movie.

Select the desired movie using To return to normal playback, press the b

center z. b/B. Movies are displayed a size smaller High quality movies than still images. Movies with the image size “320 (HQX)” 60min 160 appear on the full screen. 6/8 0:00 MOV00001 20027410:30PM PLAY FILE BACK/NEXT VOLUME, Enjoying movies filename[C:\My Documents\_upload job\3075896111\3075896111DSCP7UC\02GB-DSCP7UC\12ADV.FM] masterpage:Right 01cov.book Page 73 Thursday, May 23, 2002 3:57 PM For the single screen For the Index (nine images) een Set the mode dial to and press the zoom W button once to display an Index (nine images) screen. Press MENU. The menu appears. Select [DELETE] using b/B, then press the center z. Select [SELECT] using b/B, then press the center z. Select the movies you want to delete using v/V/b/B, then press the center z. A mark is placed on the selected movie. • SET MENU TO NEXT The movie has not been deleted yet.

Deleting movies

a Set the mode dial to scr. Mode dial: b Select the movie you want to a You can delete unnecessary movies. delete using b/B. Control button c Press MENU. MENU The menu appears. b Mode dial d Select [DELETE] using b/B, then press the center z. c The movie has not been deleted yet. e Select [OK] using v, then press the center z. d “MEMORY STICK ACCESS” appears on the screen. e The movie has been deleted when the message disappears. To cancel the deletion In Step 5, select [CANCEL]., filename[C:\My Documents\_upload job\3075896111\3075896111DSCP7UC\02GB-DSCP7UC\12ADV.FM] masterpage:Left 01cov.book Page 74 Thursday, May 23, 2002 3:57 PM o cancel the deletion Step 5, select [CANCEL]. f Repeat Step 5 of the For the Index (three images) T procedure to delete other screen In movies. a Set the mode dial to and g Press MENU. press the zoom W button twice The menu appears. to switch to the Index (three h Select [OK] using b/B, then images) screen. press the center z. b Move the movie you want to The movies are deleted when the delete to the center using b/B. “MEMORY STICK ACCESS” message disappears. c Press MENU. The menu appears. To cancel the deletion d Select [DELETE] using V, then In Step 8, select [EXIT]. press the center z. To delete all the images The movie has not been deleted yet. In Step 4, select [ALL], then press the center z. To cancel the deletion, select [CANCEL] using b/B, then press the DELETEOKcenter z. CANCEL MOV00005 20027410:30PM • OK e Select [OK] using v, then press the center z. The movie is deleted when the “MEMORY STICK ACCESS” message disappears.,

Enjoying movies

filename[C:\My Documents\_upload job\3075896111\3075896111DSCP7UC\02GB-DSCP7UC\12ADV.FM] masterpage:Right 01cov.book Page 75 Thursday, May 23, 2002 3:57 PM Cutting a file numbered Cutting movies ntrol button

MENU

Mode dial

Set the mode dial to . Select the movie you want to

cut using b/B.

Press MENU.

The menu appears.

Select [DIVIDE] using B, then

press the center z. Next, select [OK] using v, then press the center z. The playback of the movie starts.

Editing movies MOV00002.MPG

MOV00001.MPG MOV00003.MPG Co

Mode dial:

You can cut movies, or delete unnecessary123portions of movies. This is the recommended mode to use when the MOV00002.MPG “Memory Stick” capacity is insufficient, or 1. Cutting scene A. when you attach movies to your e-mail messages. 1A2B3DIVIDE point MOV00002.MPGThe file numbers assigned when 2. Cutting scene B. movies are cut MOV00004.MPG The files saved after a movie cut are a recognized as the latest files and are13A2Bbassigned new numbers. The original files are deleted, and the numbers previously MOV00005.MPG DIVIDE assigned to those files are treated as missing point c numbers. 3. Deleting scenes A and B if they are unnecessary. MOV00004.MPG MOV00007.MPGd13A2BDELETE MOV00006.MPG DELETE 4. Only the desired scenes remain. 132MOV00006.MPG, filename[C:\My Documents\_upload job\3075896111\3075896111DSCP7UC\02GB-DSCP7UC\12ADV.FM] masterpage:Left 01cov.book Page 76 Thursday, May 23, 2002 3:57 PM eleting unnecessary ortions of movies

Cut an unnecessary portion of

a movie (see the previous page).

Display the portion of the

movie you want to delete.

Press MENU.

The menu appears.

Select [DELETE] using b/ B,

then press the center z.

Select [OK] using v, then

press the center z. The movie currently displayed on the screen is deleted. e Decide on a cutting point. • You cannot cut the following files. D Press the center z at the desired – Clip Motion files p – Multi Burst files cutting point. – Still image files a – Files not long enough to cut 60min 160 6/8 – Protected MPEG movie files DIVIDE 0:04 DIVIDING • You cannot restore files once you cut them.

POINT

• The original file is deleted when you cut it. cCOKb

CANCEL EXIT OK

When you want to adjust the cutting c point, use [c/C] (frame forward/ rewind) and adjust the cutting point using b/ B. If you want to change the d cutting point, select [CANCEL]. The playback of the movie starts again. e f When you have decided on a cutting point, select [OK] using v/V, and press the center z. g Select [OK] using v, then press the center z. The movie is cut.

To cancel cutting

In Step 5, select [EXIT]. The movie appears on the screen again., Enjoying movies filename[C:\My Documents\_upload job\3075896111\3075896111DSCP7UC\02GB-DSCP7UC\12ADV.FM] masterpage:Right 01cov.book Page 77 Thursday, May 23, 2002 3:57 PM For Windows 98, 98SE, 2000, For Windows XP users details, see pages 46 to 48. Click [Copy pictures to a folder on my computer using Microsoft Scanner and Camera Wizard], then click [OK]. The “Scanner and Camera Wizard” window appears. Click [Next]. The movies stored in the “Memory Stick” are displayed. Click to remove the checkmark from any movies you do not want to copy to your computer, then click [Next]. The “Picture Name and Destination” window appears. Specify the movie file names to be copied and the copy destination, then click [Next]. Copying of the movies starts. When the task is completed, the “Other Options” window appears. • Here the “My Documents” folder is used as a copy-to folder for explanation.

Copying movies to Me users

your computer For a Double-click (My a Follow the steps below to copy movies you Computer), then double-click shot to your computer. (Removable Disk). The contents of the “Memory Stick” Before operation inserted into your camera appear. Prepare the camera and your computer • This section describes an example of following the procedures described on copying movies into the “My Documents” pages 42 to 44. folder. b b Double-click (MSSONY), then double-click (MOML0001). c The “MOML0001” folder opens. c Drag and drop the movie files into the “My Documents” folder. The movie files are copied to the “My Documents” folder. d, filename[C:\My Documents\_upload job\3075896111\3075896111DSCP7UC\02GB-DSCP7UC\12ADV.FM] masterpage:Left 01cov.book Page 78 Thursday, May 23, 2002 3:57 PM o copy movie files using

ImageMixer”

ou can use the “PIXELA ImageMixer for ony” software to copy movies to your omputer. For details, see the software’s elp files. e Click [Nothing. I’m finished For Macintosh users T working with these pictures], “1 Double-click the newly recognized icon then click [Next]. Yon the desktop. The “Completing the Scanner and SThe contents of the “Memory Stick” Camera Wizard” window appears. inserted into your camera appear. chfClick [Finish]. 2 Double-click [MSSONY]. The wizard closes. 3 Double-click [MOML0001]. • When you want to continue copying other 4 Drag and drop the movie files to the hard movies, disconnect the USB cable once disk icon. and reconnect it. Then, follow the process from Step 1. The movie files are copied to your hard disk., Troubleshooting filename[C:\My Documents\_upload job\3075896111\3075896111DSCP7UC\02GB-DSCP7UC\13TRB.FM] masterpage:Right 01cov.book Page 79 Thursday, May 23, 2002 3:57 PM Troubleshooting 2 Press RESET (page 9) located inside the 3 Consult your Sony dealer or local uthorized Sony service facility. ge 15). while pushing the battery eject lever dge of the battery pack (page 10). ttery pack (page 10). ler or local authorized Sony service C power adaptor (page 10). ttery pack (page 10). ck with a new one. ed battery pack (page 10). y pack (page 10).

Troubleshooting battery/“Memory Stick” cover, then turn a

on the power again. (This will erase the If you have trouble with your camera, try date/time settings, etc.) the following solutions. 1 Check the items on pages 79 to 85. If the RESET screen shows “C:ss:ss”, the self-diagnostics function is working. Please see page 87. Battery and power Symptom Cause Solution The battery pack is not • The camera is turned on. pTurn the power off (pa charged. The battery pack cannot • The battery pack is not properly installed. p Install the battery pack be installed. down using the front e /CHG lamp flashes. • The battery pack is not properly installed. pProperly install the ba • The battery pack malfunctions. pConsult your Sony dea facility. While charging the battery • The AC power adaptor is not connected. pProperly connect the A pack, the /CHG lamp • The battery pack is not properly installed. pProperly install the ba does not light. • The charging is complete. — The battery remaining • You have used the camera for a long time in an — indicator is incorrect. Or extremely hot or an extremely cold location. the sufficient battery • The battery pack is dead (page 97). pReplace the battery pa remaining indicator is • The battery pack is discharged. pReplace it with a charg displayed but the power • A mismatch has occurred in the remaining pFully charge the batter soon runs out. battery time information., filename[C:\My Documents\_upload job\3075896111\3075896111DSCP7UC\02GB-DSCP7UC\13TRB.FM] masterpage:L1adv-Left-04 01cov.book Page 80 Thursday, May 23, 2002 3:57 PM ttery pack (page 10). pack with a new one. ack properly (page 10). to your camera (page 14). again (page 15). arged battery pack (page 10). n ON (page 28). or, (pages 22, 30, 71). ding mode when you shoot a subject that is /16 inches) from the lens. Make sure to place y from the subject than the shortest shooting ting (page 24). page 30). s mode (page 55). Battery and power (continued) Symptom Cause Solution The battery pack runs • You are recording/playing back images in an — down too quickly. extremely cold location. • The battery pack is not charged enough. pFully charge the ba • The battery pack is dead (page 97). pReplace the battery The power cannot be • The battery pack is not installed properly. p Install the battery p turned on. • The AC power adaptor is disconnected. pConnect it securely The power turns off • If you do not operate the camera for about 90 pTurn on the power suddenly. seconds while the power is on, the camera turns off automatically to prevent wearing down the battery (when [POWER SAVE] is [OFF], after three minutes.) (page 15). • The battery pack is discharged. pReplace it with a ch Shooting still images / movies Symptom Cause Solution The LCD screen does not • The power was turned off with the LCD screen pTurn the LCD scree turned on when the power set to OFF the last time you used the camera. is turned on. The subject is not visible • The mode dial is not set to , SCN, or . pSet it to , SCN, on the LCD screen. The image is out of focus. • The subject is too close. pSet the macro recor within 50 cm (19 11 the lens farther awa distance when shoo • Scene selection is set to the Landscape mode. pCancel the setting ( • Focus preset is selected. pSet to the auto focu Unable to zoom. • You cannot zoom while shooting a movie — (MPEG movie)., Troubleshooting filename[C:\My Documents\_upload job\3075896111\3075896111DSCP7UC\02GB-DSCP7UC\13TRB.FM] masterpage:L1adv-Right-04 01cov.book Page 81 Thursday, May 23, 2002 3:57 PM Symptom Cause Solution 2, 93). age 55). f the LCD screen (pages 52, 94). to [OFF] (pages 52, 94). age 55). f the LCD screen (pages 52, 94). e (page 62). on. k” (page 18). d in the “Memory Stick,” or format it. Stick.” position (page 96). ages 22, 30). than , SET UP, or (page 26). (no indicator) or (forced flash) ode (page 30). Digital zoom does not • You cannot zoom while shooting a movie — function. (MPEG movie). • [DIGITAL ZOOM] is set to [OFF] in the SET pSet it to [ON] (pages 5 UP setting. • The LCD screen is OFF. pTurn it ON (page 28). The image is too dark. • You are shooting a subject with a light source pAdjust the exposure (p behind the subject. • The brightness of the LCD screen is too low. pAdjust the brightness o • [POWER SAVE] is set to [ON]. pSet [POWER SAVE] The image is too bright. • You are shooting under a spotlight in a dark pAdjust the exposure (p location, like stage lighting. • The LCD screen is too bright. pAdjust the brightness o The image is • [PFX] (P. EFFECT) is set to [B&W]. pCancel the B&W mod monochrome (black and white). Vertical streaks appear • The smear phenomenon is occurring. pThis is not a malfuncti when you are shooting a very bright subject. You cannot shoot images. • No “Memory Stick” is inserted. p Insert a “Memory Stic • The capacity of the “Memory Stick” is pDelete the images save insufficient. pChange the “Memory • The write-protect switch on the “Memory Stick” pSet it to the recording is set to the LOCK position. • You cannot shoot while the flash is charging. — • The mode dial is not set to or SCN while pSet it to or SCN (p shooting a still image. • The mode dial is not set to when shooting a pSet it to (page 71). movie. Cannot shoot images with • The mode dial is set to , SET UP, or . pSet it to a setting other the flash. • The flash is set to (No flash). pSet the flash to “Auto” (page 26). • When shooting still images, Scene selection is pCancel the Twilight m set to the Twilight mode., filename[C:\My Documents\_upload job\3075896111\3075896111DSCP7UC\02GB-DSCP7UC\13TRB.FM] masterpage:L1adv-Left-04 01cov.book Page 82 Thursday, May 23, 2002 3:57 PM ction mode (page 27). and time (page 16). (page 32). ction. [PAL] (pages 52, 94). on (page 34). ction. Set to the focus preset mode n (page 66). ng position (page 96). Shooting still images/ movies (continued) Symptom Cause Solution The eyes of the subject — pSet the red eye redu come out red. The date and time are • The date and time are not set correctly. pSet the correct date recorded incorrectly. Viewing images Symptom Cause Solution The image cannot be • The mode dial is not set to . pSet the mode dial to played back. • You cannot play back the image on your camera, — if it is modified on a computer or its file name is changed. Images are coarse right — pThis is not a malfun after being played back. The images cannot be • The [VIDEO OUT] setting for your camera in pSet it to [NTSC] or played back on a TV. SET UP is incorrect. • The connection is not correct. pCheck the connecti The images cannot be — pSee page 83. played back on a computer. Unknown beeps are heard • These beeps are heard when the auto focus is pThis is not a malfun from the camera while working. (page 55). viewing a movie. Deleting/editing an image Symptom Cause Solution Your camera cannot • The image is protected. pCancel the protectio delete an image. • The write-protect switch on the “Memory Stick” pSet it to the recordi is set to the LOCK position., Troubleshooting filename[C:\My Documents\_upload job\3075896111\3075896111DSCP7UC\02GB-DSCP7UC\13TRB.FM] masterpage:L1adv-Right-04 01cov.book Page 83 Thursday, May 23, 2002 3:57 PM Symptom Cause Solution ch on the “Memory Stick” will prevent ges by mistake (page 96). computer environment” (page 41). on as Administrator (authorized 42). age 15). ptor (supplied) (page 14). cable (page 44). ble, and securely connect it again. Make ” is displayed on the LCD screen pages 52, 94). ables except for those connected to the and your camera. (page 42). recognized device from your computer, river (pages 42, 46). You have deleted the • Once you have deleted a file, you cannot restore pThe write-protect swit image by mistake. it. you from deleting ima The resizing function • Movie (MPEG movie)/Clip Motion/Multi Burst — does not work. files cannot be resized. You cannot display a print • Print marks cannot be attached to movie (MPEG — mark. movie)/Clip Motion files. Computers Symptom Cause Solution You do not know whether — pCheck “Recommended or not your OS can be used with the camera. You cannot install the — p In Windows 2000, log USB driver. Administrators) (page Your computer does not • The camera is turned off. pTurn on the camera (p recognize your camera. • The battery level is too low. pUse the AC power ada • You are not using the supplied USB cable. pUse the supplied USB • The USB cable is not connected securely. pDisconnect the USB ca sure that “USB MODE (page 44). • [USB CONNECT] is set to [PTP] in the SET UP pSet it to [NORMAL] ( settings. • The USB connectors on your computer are pDisconnect the USB c connected to other equipment besides the keyboard, the mouse, keyboard, the mouse, and your camera. • The USB driver is not installed. p Install the USB driver • Your computer does not properly recognize the pDelete the erroneously device because you connected the camera and then install the USB d your computer with the USB cable before you installed the “USB Driver” from the supplied CD-ROM., filename[C:\My Documents\_upload job\3075896111\3075896111DSCP7UC\02GB-DSCP7UC\13TRB.FM] masterpage:L1adv-Left-04 01cov.book Page 84 Thursday, May 23, 2002 3:57 PM and your computer correctly using the USB cedure that your OS suggests (pages 45, 46, “PIXELA ImageMixer for Sony” software, “PIXELA ImageMixer for Sony” software, er or software manufacturer. hard disk of the computer and then play the ard disk (page 77). ttings. ges to print” (page 69), or if you are using eMixer for Sony” software, click on HELP. ht side (page 18). ng position (page 96). images (pages 36, 73). ng position (page 96). t you set the “Memory Stick” write-protect position to protect accidental erasure Computers (continued) Symptom Cause Solution You cannot copy images. • The camera is not correctly connected to your pConnect the camera computer. cable (See above). • The copy procedure differs depending on your pFollow the copy pro OS. 51). — p If you are using the click on HELP. The image cannot be — p If you are using the played back on a click on HELP. computer. — pConsult the comput The image and sound are • You are playing back the file directly from the pCopy the file to the affected by noise when “Memory Stick.” file back from the h you play back an image on a computer. You cannot print an — pCheck the printer se image. pSee “Choosing ima the “PIXELA Imag “Memory Stick” Symptom Cause Solution You cannot insert a • You are inserting it backwards. p Insert it from the rig “Memory Stick.” You cannot record on a • The write-protect switch on the “Memory Stick” pSet it to the recordi “Memory Stick.” is set to the LOCK position. • The “Memory Stick” is full. pDelete unnecessary You cannot format a • The write-protect switch on the “Memory Stick” pSet it to the recordi “Memory Stick.” is set to the LOCK position. You have formatted a • All the images on the “Memory Stick” are pWe recommend tha “Memory Stick” by deleted by formatting. switch to the LOCK mistake. (page 96)., Troubleshooting filename[C:\My Documents\_upload job\3075896111\3075896111DSCP7UC\02GB-DSCP7UC\13TRB.FM] masterpage:L1adv-Right-04 01cov.book Page 85 Thursday, May 23, 2002 3:57 PM Others ” battery only (page 96). ge 10). the DC IN jack of your camera and to a t) (page 14). after one minute, reconnect all power power on and check that the camera r one minute, reinstall the battery. If this e RESET button located inside the ” cover with a pointed object, then turn his will clear the date/time settings, etc.) ages 99 to 101). charged battery or use the AC power . bout an hour and then try to use it again on. Symptom Cause Solution The camera does not • An “InfoLITHIUM” battery is not used. pUse an “InfoLITHIUM work, no operations can • The battery level is low or zero (The pCharge the battery (pa be performed. indicator appears.). • The AC power adaptor is not connected pConnect it securely to securely. wall outlet (wall socke • The internal system is not working properly. pDisconnect, and then, sources. Then turn the works properly. The power is on, but the • The internal system is not working properly. pRemove, and then, afte camera does not work. does not work, press th battery/“Memory Stick the power on again. (T You cannot identify the — pCheck the indicator (p indicator on the LCD screen. The lens does not move • The battery pack is discharged. pReplace it with a fully back when you turn off the adaptor (pages 10, 14) camera. The lens gets fogged. • Condensation is occurring. pLeave the camera for a (page 95). The camera gets hot if you — pThis is not a malfuncti use it for a long time., filename[C:\My Documents\_upload job\3075896111\3075896111DSCP7UC\02GB-DSCP7UC\13TRB.FM] masterpage:L1adv-Left-04 01cov.book Page 86 Thursday, May 23, 2002 3:57 PM . ry Stick” is dirty. (page 40). ion. Set it to the recording position (page 96). es. Delete unnecessary images (pages 36, 73). your camera. his camera. ng on the conditions of use or the type of minutes of remaining battery time left. he camera on a tripod, or otherwise secure

Warnings and

messages The following messages appear on the LCD screen. Message Meaning/ Corrective Action NO MEMORY STICK • Insert a “Memory Stick” (page 18). SYSTEM ERROR • Turn the power off and on again (page 15). MEMORY STICK ERROR • The inserted “Memory Stick” cannot be used in your camera (page 96) • The “Memory Stick” is damaged, or the terminal section of the “Memo • Insert the “Memory Stick” correctly (page 18). FORMAT ERROR • The “Memory Stick” format failed. Format the “Memory Stick” again MEMORY STICK LOCKED • The write-protect switch on the “Memory Stick” is set to the LOCK posit NO MEMORY SPACE • The capacity of the “Memory Stick” is insufficient. You cannot record imag NO FILE • No images have been recorded on the “Memory Stick.” FILE ERROR • An error occurred while playing back the image. FILE PROTECT • The image is protected against erasure. For "InfoLITHIUM" • The battery is not the “InfoLITHIUM” type. BATTERY ONLY FOLDER ERROR • A folder with the same name already exists on the “Memory Stick.” IMAGE SIZE OVER • You are playing back an image of a size that cannot be played back on INVALID OPERATION • You are playing back a file that was created on equipment other than t • The battery level is low or zero. Charge the battery (page 10). Dependi battery pack, the indicator may flash even though there are still 5 to 10 CAN NOT DIVIDE • The file is not long enough to be divided. • The file is not a movie (MPEG movie). • You are not holding the camera steadly enough. Use the flash, mount t the camera in place. TURN THE POWER OFF • A problem with the lens caused an error. AND ON AGAIN, Troubleshooting filename[C:\My Documents\_upload job\3075896111\3075896111DSCP7UC\02GB-DSCP7UC\13TRB.FM] masterpage:L1adv-Right-03 01cov.book Page 87 Thursday, May 23, 2002 3:57 PM Code Cause Countermeasure urn the power off and on again page 15). e-insert the “Memory Stick” several imes. ormat the “Memory Stick” (page 40). nsert a new “Memory Stick” (page 18). ress the RESET button (page 9) located nside the battery/“Memory Stick” cover, hen turn the power on again.

Self-diagnostics C:32: ss There is trouble with your • T

display camera’s hardware, or with the ( zoom function. Your camera has a self-diagnostics display. C:13: ss The camera cannot read or write • R This function displays the condition of the data on the “Memory Stick.” t camera on the LCD screen using a An unformatted “Memory Stick” • F combination of a letter and four numerical is inserted. digits. If this occurs, check the following The inserted “Memory Stick” • I code chart and take the corresponding cannot be used with your camera, countermeasure. The last two digits or the data is damaged. (indicated by ss)will differ depending on E:61: ss A camera malfunction has • P the state of the camera. E:91: ss occurred. i t If your camera is not still functioning well after trying the countermeasure a couple of C:32:ss times, contact your Sony dealer or local autholized Sony service facility and inform them of the 5-digit code. Example: E:61:10 Self-diagnostics display, filename[C:\My Documents\_upload job\3075896111\3075896111DSCP7UC\02GB-DSCP7UC\14ADD.FM] masterpage:Left 01cov.book Page 88 Thursday, May 23, 2002 3:57 PM

Additional information OICE

(Units: images) 8M 16M 32M 64M 128M 272×17043715 30 60 SC-P9) (7) (13) (28) (56) (112) 272 (3:2) 3 7 15 30 60 SC-P9) (7) (13) (28) (56) (112) 048×15364919 39 78 SC-P7) (8) (16) (34) (69) (138) 048 (3:2) 4 9 19 39 78 SC-P7) (8) (16) (34) (69) (138) 600×1200 7 14 31 62 124(13) (26) (54) (108) (216) 280×960 11 22 45 90 180(19) (38) (78) (156) (312) 40×480 34 68 139 280 560(56) (120) (244) (491) (982) PEG movies (Units: seconds) 8M 16M 32M 64M 128M 20 (HQX) 20 40 85 170 340 20×240 80 160 340 680 1360 60×112 320 640 1300 2700 5400 Clip Motion V

The number of images (Units: images)

that can be saved/ 8M 16M 32M 64M 128M shooting time NORMAL 40 80 160 320 640 2 MOBILE 300 450 900 1800 3600 (D The number of images that can be saved and NORMAL: When 10 frames are shot 2 the shooting time are different, depending MOBILE: When two frames are shot (D on the capacity of the “Memory Stick,” the 2 image size, and the image quality. Refer to Multi Burst (D the following charts when you choose a (Units: images) 2 “Memory Stick.” 8M 16M 32M 64M 128M (D • The number of images is listed in FINE 1280×960 12 24 50 100 202 1 (STANDARD) order. (23) (44) (93) (186) (375) • The values for the number of images that 1 can be saved and the shooting time may E-mail vary, depending on the shooting (Units: images) 6 conditions. 8M 16M 32M 64M 128M • For normal shooting times and numbers 2272×17043716 32 64 M of images that can be saved, see page 21. (DSC-P9) (7) (14) (29) (58) (116) 2272 (3:2) 3 7 16 32 64 (DSC-P9) (7) (14) (29) (58) (116) 2048×15364920 40 81 3 (DSC-P7) (8) (17) (36) (72) (146) 3 2048 (3:2) 4 9 20 40 81 1 (DSC-P7) (8) (17) (36) (72) (146) 1600×1200 8 16 32 64 128(14) (28) (59) (118) (236) 1280×960 12 24 48 96 192(21) (42) (88) (176) (352) 640×480 43 87 177 357 714(95) (192) (390) (786) (1572), Additional information filename[C:\My Documents\_upload job\3075896111\3075896111DSCP7UC\02GB-DSCP7UC\14ADD.FM] masterpage:L1adv-Right-04 01cov.book Page 89 Thursday, May 23, 2002 3:57 PM the mode dial is set to , this setting ets the focus preset distance (page 55). nt to shoot (page 56). under dark conditions or shooting a fast- When recording high-quality images, use is set to SCN, this setting cannot be still images (page 19). still images (page 19). de. / Records images in the standard

Menu items

Menu items that can be changed differ depending on the position of the mode dial. The LCD screen shows only the items you can operate based on the current position of the mode dial. Factory settings are indicated with x. When the mode dial is set to or SCN Item Setting Description SCN x / / Selects one of the Scene selections (When cannot be carried out.) (page 30). (EV) +2.0EV / +1.7EV / +1.3EV / Adjusts the exposure (page 55). +1.0EV /+0.7EV / +0.3EV / x0EV / −0.3EV / −0.7EV / −1.0EV / −1.3EV / −1.7EV / −2.0EV 9 (FOCUS) ∞ / 7.0m / 3.0m / 1.0m / 0.5m / Chooses the auto focus method (page 53), s CENTER AF / x MULTI AF WB (WHITE BAL) / / / / xAUTO Sets the white balance (page 57). (SPOT METER) ON / x OFF Matches the exposure to the subject you wa ISO 400 / 200 / 100 / xAUTO Selects the ISO sensitivity. When shooting moving subject, use a high-number setting. a low-number setting (When the mode dial carried out.). (IMAGE SIZE) x2272×1704 / 2272 (3:2) / Selects the image size used when shooting (DSC-P9) 1600×1200 / 1280×960 / 640×480 (IMAGE SIZE) x2048×1536 / 2048 (3:2) / Selects the image size used when shooting (DSC-P7) 1600×1200 / 1280×960 / 640×480 (P.QUALITY) xFINE / STANDARD Records images with fine image quality mo image quality mode (page 19)., filename[C:\My Documents\_upload job\3075896111\3075896111DSCP7UC\02GB-DSCP7UC\14ADD.FM] masterpage:L1adv-Left-04 01cov.book Page 90 Thursday, May 23, 2002 3:57 PM ge) in addition to the JPEG file (page 61). file in addition to the selected image size cording mode. al. al. ge 62). indicator appears (except when the OVIE] in the SET UP settings) ), sets the focus preset distance (page 55). want to shoot (page 56). rding movies (page 71). ge 62). When the mode dial is set to or SCN (continued) Item Setting Description MODE (REC MODE) VOICE – Records an audio file (with a still ima E-MAIL – Records a small-size (320×240) JPEG (page 61). xNORMAL – Records an image using the normal re ± (FLASH LEVEL) HIGH – Makes the flash level higher than norm xNORMAL – Normal setting. LOW – Makes the flash level lower than norm PFX (P.EFFECT) SOLARIZE / B&W / SEPIA / Sets the special effects for the image (pa NEG.ART / xOFF (SHARPNESS) +2 / +1 / x0 / –1 / –2 Adjusts the sharpness of the image. The setting is 0). When the mode dial is set to (when [MOVING IMAGE] is set to [MPEG M Item Setting Description (EV) +2.0EV / +1.7EV / +1.3EV / Adjusts the exposure (page 55). +1.0EV / +0.7EV / +0.3EV / x0EV / −0.3EV / −0.7EV / −1.0EV / −1.3EV / −1.7EV / −2.0EV 9 (FOCUS) ∞ / 7.0m / 3.0m / 1.0m / 0.5m / Chooses the auto focus method (page 53 CENTER AF / x MULTI AF WB (WHITE BAL) / / / / xAUTO Sets the white balance (page 57). (SPOT METER) ON / x OFF Matches the exposure to the subject you (IMAGE SIZE) 320 (HQX) / 320×240 / x160×112 Selects the MPEG image size when reco PFX (P.EFFECT) SOLARIZE / B&W / SEPIA / Sets the special effects for the image (pa NEG.ART / xOFF, Additional information filename[C:\My Documents\_upload job\3075896111\3075896111DSCP7UC\02GB-DSCP7UC\14ADD.FM] masterpage:L1adv-Right-04 01cov.book Page 91 Thursday, May 23, 2002 3:57 PM When the mode dial is set to (when [MOVING IMAGE] is set to [CLIP MOTION] in the SET UP settings) ets the focus preset distance (page 55). nt to shoot (page 56). 8).62). indicator appears (except when the ST] in the SET UP settings) ets the focus preset distance (page 55). nt to shoot (page 56). Item Setting Description (EV) +2.0EV / +1.7EV / +1.3EV / Adjusts the exposure (page 55). +1.0EV / +0.7EV / +0.3EV / x0EV / −0.3EV / −0.7EV / −1.0EV / −1.3EV / −1.7EV / −2.0EV 9 (FOCUS) ∞ / 7.0m / 3.0m / 1.0m / 0.5m / Chooses the auto focus method (page 53), s CENTER AF / x MULTI AF WB (WHITE BAL) / / / / xAUTO Sets the white balance (page 57). (SPOT METER) ON / x OFF Matches the exposure to the subject you wa (IMAGE SIZE) xNORMAL / MOBILE Selects the Clip Motion image size (page 5 ± (FLASH LEVEL) HIGH – Makes the flash level higher than normal xNORMAL – Normal setting. LOW – Makes the flash level lower than normal. PFX (P.EFFECT) SOLARIZE / B&W / SEPIA / Sets the special effects for the image (page NEG.ART / xOFF (SHARPNESS) +2 / +1/ x0 / –1 / –2 Adjusts the sharpness of the image. The setting is 0). When the mode dial is set to (when [MOVING IMAGE] is set to [MULTI BUR Item Setting Description (EV) +2.0EV / +1.7EV / +1.3EV / Adjusts the exposure (page 55). +1.0EV / +0.7EV / +0.3EV / x0EV / −0.3EV / −0.7EV / −1.0EV / −1.3EV / −1.7EV / −2.0EV 9 (FOCUS) ∞ / 7.0m / 3.0m / 1.0m / 0.5m / Chooses the auto focus method (page 53), s CENTER AF / x MULTI AF WB (WHITE BAL) / / / / xAUTO Sets the white balance (page 57). (SPOT METER) ON / x OFF Matches the exposure to the subject you wa, filename[C:\My Documents\_upload job\3075896111\3075896111DSCP7UC\02GB-DSCP7UC\14ADD.FM] masterpage:L1adv-Left-04 01cov.book Page 92 Thursday, May 23, 2002 3:57 PM the SET UP settings) (continued) st between-frame shutter interval. between-frame shutter interval. er interval change depending on the setting P (page 94). mode. / Records images in the standard ge 62). indicator appears (except when the , 73). re (page 66). ge 69). ingle screen only.) the slide show 8). (For single images only.) ngle images only.) mages only.) When the mode dial is set to (when [MOVING IMAGE] is set to [MULTI BURST] in Item Setting Description (INTERVAL) 1/7.5 / 1/15 / x1/30 (NTSC) – In NTSC mode, choose the Multi Bur 1/6.3 / 1/12.5 / x1/25 (PAL) – In PAL mode, choose the Multi Burst * The choices of between-frame shutt of the [VIDEO OUT] item in SET U (P.QUALITY) xFINE / STANDARD Records images with fine image quality image quality mode (page 19). PFX (P.EFFECT) SOLARIZE / B&W / SEPIA / Sets the special effects for the image (pa NEG.ART / xOFF (SHARPNESS) +2 / +1 / x0 / –1 / –2 Adjusts the sharpness of the image. The setting is 0). When the mode dial is set to Item Setting Description DELETE OK – Deletes the displayed image (pages 36 CANCEL – Cancels deleting of the image. PROTECT — Protects images against accidental erasu PRINT — Selects still images you want to print (pa SLIDE INTERVAL – Sets the slide show interval. (For the s x3 sec/ 5 sec/ 10 sec/ 30 sec/ 1 min REPEAT – Repeats the slide show. START xON/OFF CANCEL – Starts the slide show – Cancels the settings and execution of RESIZE 2272×1704 (DSC-P9 only) / Changes the recorded image size (page 6 2048×1536 (DSC-P7 only) / 1600×1200 / 1280×960 / 640×480 /

CANCEL

ROTATE (counter-clockwise) / Rotates the still image (page 65). (For si (clockwise) / OK / CANCEL DIVIDE OK / CANCEL Divides a movie (page 75). (For single i,

Additional information

filename[C:\My Documents\_upload job\3075896111\3075896111DSCP7UC\02GB-DSCP7UC\14ADD.FM] masterpage:L1adv-Right-04 01cov.book Page 93 Thursday, May 23, 2002 3:57 PM 9, 71). into the image (page 29). ge 24). ng a flash (page 27). the dark. Helps when it is hard to focus ). es all the information recorded on a ge 40). tick” is changed. e “Memory Stick” is changed.se.

SET UP items

Set the mode dial to SET UP. The SET UP When shooting movies, or images recorded screen appears. in Clip Motion/Multi Burst modes, the date Factory settings are indicated with x. and time cannot be inserted in the image. Also, the date and time will not be displayed when shooting. The date and time will be displayed when the image is played back.

CAMERA

Item Setting Description MOVING IMAGE xMPEG MOVIE / CLIP MOTION Selects the shooting mode (pages 52, 58, 5 / MULTI BURST DATE/TIME DAY & TIME / DATE / xOFF Selects whether to insert the date and time DIGITAL ZOOM xON / OFF Selects whether to use the digital zoom (pa RED EYE REDUCTION ON / xOFF Reduces the red-eye phenomenon when usi AF ILLUMINATOR xAUTO / OFF Selects whether to emit an AF assist light in on the subject under dark lighting (page 27 SETUP 1 Item Setting Description FORMAT OK / CANCEL Formats the “Memory Stick.” Please note that formatting eras “Memory Stick,” including even erasure protected images (pa FILE NUMBER x SERIES – Assigns numbers to files in sequence even if the “Memory S RESET – Resets the file numbering and starts from 0001 each time th / LANGUAGE x ENGLISH – Displays the menu items, warnings and messages in English / JPN – Displays the menu items, warnings and messages in Japane CLOCK SET OK / CANCEL Sets the date and time (page 16)., filename[C:\My Documents\_upload job\3075896111\3075896111DSCP7UC\02GB-DSCP7UC\14ADD.FM] masterpage:Left 01cov.book Page 94 Thursday, May 23, 2002 3:57 PM ded images. IGHT] makes the screen bright and easy to ions, but also uses up the battery charge h the battery pack. When [POWER SAVE] rol button/ release the shutter. ).Displayed only when you are using your SETUP 2 Item Setting Description LCD BRIGHT/ Selects the LCD brightness. This has no effect on the recor BRIGHTNESS xNORMAL/ DARK LCD BACKLIGHT BRIGHT/ Selects the brightness of the LCD backlight. Selecting [BR xNORMAL see when using the camera outdoors or in other bright locat faster. Displayed only when you are using your camera wit is set to [ON], this item cannot be set. BEEP SHUTTER – Turns on the shutter sound when you release the shutter. x ON – Turns on the beep/shutter sound when you press the cont OFF – Turns off the beep/shutter sound. VIDEO OUT NTSC – Sets the video output signal to NTSC mode (Japan, USA PAL – Sets the video output signal to PAL mode (Europe). USB CONNECT PTP/xNORMAL Switches the USB mode (page 41). POWER SAVE x ON / OFF Selects whether to use the POWER SAVE mode (page 13) camera with the battery pack., Additional information filename[C:\My Documents\_upload job\3075896111\3075896111DSCP7UC\02GB-DSCP7UC\14ADD.FM] masterpage:Right 01cov.book Page 95 Thursday, May 23, 2002 3:57 PM he internal rechargeable button attery his camera has an internal rechargeable utton battery for maintaining the date and me and other settings regardless of hether the power is on or off. his rechargeable button battery is ontinually charged as long as you are using e camera. However, if you use the camera r only short periods it discharges radually, and if you do not use the camera t all for about one month it becomes ompletely discharged. In this case, be sure charge this rechargeable button battery efore using the camera. ote that even if this rechargeable button attery is not charged, you can still use the amera as long as you do not record the date nd time. harging the battery onnect the camera to a wall outlet (wall cket) using the AC power adapter or stall a charged battery pack, and leave the amera for 24 hours or more with the OWER button set to OFF. On moisture condensation T

Precautions If the camera is brought directly from a cold b

to a warm location, or is placed in a very T Cleaning damp room, moisture may condense inside b Cleaning the LCD screen or outside the camera. This moisture ti Clean the screen surface with an LCD condensation may cause a malfunction of w cleaning kit (not supplied) to remove the camera. T fingerprints, dust, etc. c Moisture condensation occurs easily th Cleaning the lens when: fo Wipe the lens with a soft cloth to remove • The camera is brought from a cold g fingerprints, dust, etc. location such as a ski slope into a warmly a heated room. c Cleaning the DC plug • The camera is taken from an air- to Clean the DC plug of the AC power adaptor conditioned room or car interior to the hot b with a dry cotton bud. Do not use the dirty outdoors, etc. N plug. Use of the dirty plug may not properly b charge the battery pack. To prevent moisture condensation c When bringing the camera from a cold a Cleaning the camera surface place to a warm place, seal the camera in a Clean the camera surface with a soft cloth plastic bag and leave it in the new location C slightly moistened with water, then wipe the for about an hour. Remove the plastic bag C surface with a dry cloth. Do not use any type when the camera has adapted to the new so of solvent such as thinner, alcohol or benzine temperature. in as this may damage the finish or the casing. c If moisture condensation occurs P Note on operating temperature Turn off the camera and wait about an hour The camera is designed for use within a for the moisture to evaporate. Note that if temperature range of 0° to 40° (32°F to you attempt to shoot with moisture 104°F). Shooting in extremely cold or hot remaining inside the lens, you will be locations that exceed this range is not unable to record clear images. recommended., filename[C:\My Documents\_upload job\3075896111\3075896111DSCP7UC\02GB-DSCP7UC\14ADD.FM] masterpage:Left 01cov.book Page 96 Thursday, May 23, 2002 3:57 PM • You cannot record or delete images when the e “InfoLITHIUM” ttery pack at is the “InfoLITHIUM” tery pack? “InfoLITHIUM” battery pack is a um-ion battery pack that has functions ommunicating information related to ating conditions of your camera. “InfoLITHIUM” battery pack ulates the power consumption rding to the operating conditions of r camera, and displays the remaining ery time in minutes. arging the battery pack e recommend charging the battery pack an ambient temperature of between °C to 30°C (50°F to 86°F). If you arge the battery pack outside of this mperature range, you may not be able to ficiently charge the battery pack. e recommend fully charging the battery ck.

The “Memory Stick” write-protect switch is set to LOCK. The Th

position or the shape of the write-protect switch “Memory Stick” is a new compact, portable may differ depending on the “Memory Stick” ba you use. and versatile IC recording medium with a data capacity that exceeds the capacity of a Connector floppy disk. There are two types of “Memory Stick”: an Wh ordinary “Memory Stick” and a bat “MagicGate Memory Stick” that are Write-protect The equipped with the MagicGate copyright switch lithi protection technology. You can use both for c types of “Memory Stick” with your camera. Labeling position oper However, because your camera does not • Do not remove the “Memory Stick” while The support the MagicGate standards, data reading or writing data. calc • Data may be damaged in a location subject to recorded with your camera is not subject to the effects of static electricity or noise. acco MagicGate* copyright protection. • Do not attach any other material than the you supplied label on the labeling position. batt * MagicGate is copyright protection technology • When you carry or store the “Memory Stick,” that uses encryption technology. put it in the case supplied with it. • Do not touch the terminals of a “Memory Ch Stick” with your hand or a metal object. • W • Do not strike, bend or drop a “Memory Stick.” in • Do not disassemble or modify a “Memory 10 Stick.” ch • Do not expose the “Memory Stick” to water. te ef • W pa,

Additional information

filename[C:\My Documents\_upload job\3075896111\3075896111DSCP7UC\02GB-DSCP7UC\14ADD.FM] masterpage:Right 01cov.book Page 97 Thursday, May 23, 2002 3:57 PM pecifications ystem age device DSC-P9 8.98 mm (1/1.8 type) color

CCD

Primary color filter DSC-P7 8.93 mm (1/1.8 type) color

CCD

Primary color filter otal pixels number of camera DSC-P9 Approx. 4 130 000 pixels DSC-P7 Approx. 3 340 000 pixels ens 3× zoom lens f=8−24.0 mm (5/ 1516 − /16 inches) (35 mm camera conversion: 39 to 117mm (1 17/ 1932 − 4 /32 inches)) F2.8−5.6 amera ffective pixels number of camera DSC-P9 Approx. 3 950 000 pixels DSC-P7 Approx. 3 210 000 pixels xposure control Automatic, Scene selection (three modes) hite balance Automatic, Daylight, Cloudy, Fluorescent, Incandescent

Effective use of the battery How to store the battery pack

• Battery performance decreases in low- • If the battery pack is not to be used foraStemperature surroundings, and the battery long time, do the following procedure life is shortened under such once per year to maintain proper function. S circumstances. To use the battery pack 1. Fully charge the battery pack. Im longer, we recommend you keep the 2. Discharge on your camera. battery pack in a pocket close to your 3. Remove the battery from your camera body to warm it, and insert it in your and store it in a dry, cool place. camera just before you start shooting. • To use the battery pack up on your • If you use the LCD screen or shoot a lot camera, leave the POWER button to on in using the zoom or flash, the battery power slide show playback mode (page 64) until

T

will be used up faster. the power goes off. • We recommend having spare batteries handy for two or three times the expected Battery life shooting time, and try test shooting • The battery life is limited. Battery before the actually using the camera. Lcapacity decreases little by little as you • Do not expose the battery pack to water. use it more and more, and as time passes. The battery pack is not water-resistant. When the battery operating time seems to have been considerably shortened, a

Remaining battery time indicator probable cause is that the battery pack has C

If the power goes off although the battery reached the end of its life.

E

remaining indicator indicates that the • The battery life varies depending on battery pack has enough power to operate, storage, operating conditions, and charge the battery pack fully again after environment, and is different for each running it down so that the indication on the battery pack. battery remaining indicator is correct. Note, E however, that the correct battery indication sometimes will not be restored if it is used W in high temperatures for a long time or left in a fully charged state, or the battery pack is frequently used., filename[C:\My Documents\_upload job\3075896111\3075896111DSCP7UC\02GB-DSCP7UC\14ADD.FM] masterpage:Left 01cov.book Page 98 Thursday, May 23, 2002 3:57 PM File format Still images: DCF conformity Power, general AC-LS1A AC power adaptor er requirements AC 100 – 240 V, 50/60 Hz d output voltage DC 4.2 V, 1.5 A ating temperature range 0° to +40°C (32° to +104°F) ge temperature range −20° to +60°C (−4° to +140°F) ensions 105 × 36 × 56 mm (4 1/4 × 1 7/16 × 2 1/4 inches) (W/H/D, protruding parts not included) Approx. 180 g (6 oz) (adaptor only)

FC10 battery pack

battery Lithium ion battery imum voltage DC 4.2 V inal voltage DC 3.6 V city 2.4 Wh (675 mAh) essories V connecting cable (1) -FC10 battery pack (1) -LS1A AC power adaptor (1) wer cord (mains lead) (1) B cable (1) rist strap (1) emory Stick” (16MB) (1) -ROM (USB driver: SPVD-008) (1) erating Instructions (1) gn and specifications are subject to change out notice. (Exif Ver. 2.2, JPEG conformity GIF at Clip Motion) Used battery pack Pow DPOF correspondence NP-FC10 Movies: MPEG1 conformity Power requirements Rate (Monaural) 3.6 V Audio with still image: MPEG1 Power consumption (when shooting) Oper conformity (Monaural) 1.9W Recording media Operating temperature range Stora “Memory Stick” 0° to +40°C (32° to +104°F) Flash Recommended distance Storage temperature range Dim 0.5 to 3.8 m (1.6 to 12.5 ft) (W) −20° to +60°C (−4° to +140°F) 0.6 to 2.4 m (2 to 7.9 ft) (T) Dimensions 114 × 51.5 × 35.8 mm (when ISO sensitivity is set to Auto) (4 1/ × 2 × 1 3/ inches) Mass2 8 (W/H/D, protruding portions not

Output connectors included)

A/V OUT (MONO) jack Mass 206 g (7 oz) (NP-FC10 battery pack, NP- Minijack “Memory Stick” and wrist strap Used Video: 1 Vp-p, 75 Ω, unbalanced, included) sync negative MaxMicrophone Electret condenser microphone Audio: 327 mV (at a 47 kΩ load) Output impedance 2.2 kΩ Speaker Dynamic speaker Nom USB jack mini-B Capa

LCD screen Acc

LCD panel used • A/ 3.8 cm (1.5 type) TFT drive • NP Total number of dots 123 200 (560×220) dots • AC • Po • US • W • “M • CD • Op Desi with,

Additional information

filename[C:\My Documents\_upload job\3075896111\3075896111DSCP7UC\02GB-DSCP7UC\14ADD.FM] masterpage:Right 01cov.book Page 99 Thursday, May 23, 2002 3:57 PM I Low battery warning (11) AF range finder (53) Spot light-meter aiming point (57) Image quality indicator (19, 20) Scene selection indicator (30) Remaining images indicator (21) Self-diagnostics display (87) Remaining “Memory Stick” capacity indicator (21) Center AF indicator (53)/ Focus preset value (55) EV adjustment indicator (55) Iris value indicator Shutter speed indicator Macro (24) Self-timer display (25) Vibration warning indicator (86) Menu/Guide menu (52) ssing the MENU button switches the menu/ ide menu on/off.

The LCD screen J K For shooting still images L

1M2qsN3qd 4 qfO5qg 60min 2272 qh P 3:2 SOLARIZE qjQ6F2.8 7 + 125 RqkS8ql T WB ISO U

V

9 w;

W

q; wa • Pre qa ws gu wd A Image size indicator (19, 20) E Flash mode (26)/Red-eye B Recording mode indicator reduction (27)/White balance (58 − 61) indicator (57)/AF illuminator C AE/AF lock indicator (22, 54) indicator (27, 93) D Remaining battery indicator F Date/time indicator (29) display (11) ISO sensitivity (89) G Sharpness indicator (90, 91, 92) H Picture effect indicator (62), filename[C:\My Documents\_upload job\3075896111\3075896111DSCP7UC\02GB-DSCP7UC\14ADD.FM] masterpage:Left 01cov.book Page 100 Thursday, May 23, 2002 3:57 PM he page numbers in parentheses indicate he location of additional important nformation.

For shooting movies

172860min 160 3 STBY 9 q; 4 SOLARIZE qa 5 + qs 6 qd WB qf A Recording mode indicator (71) J Center AF indicator (53)/ T B Remaining battery indicator Focus preset value (55) t display (11) K EV adjustment indicator (55) i C White balance indicator (57) L Macro (24) D Picture effect indicator (62) M Self-timer indicator (25) E Spot light-metering aiming point N Menu/Guide menu (52) (57) • Pressing the MENU button switches the menu/ F AF range finder (53) guide menu on/off. G Image size indicator (71) H Recording time remaining indicator (Maximum recording time) indicator (12)/ Self-diagnostics display (87) I Remaining “Memory Stick” capacity indicator (21),

Additional information

filename[C:\My Documents\_upload job\3075896111\3075896111DSCP7UC\02GB-DSCP7UC\14ADD.FM] masterpage:Right 01cov.book Page 101 Thursday, May 23, 2002 3:57 PM

For still image playback For movie playback

q; 1 qa5 qf 60min 60min640 320 qg 2 11/12 6 qs VOL. 6/80:12 qh x1.3 8 qd 3 qj qk49DELETE PROTECT PRINT SLIDE FILE BACK/NEXT VOLUME

OK

ql A Recording mode indicator (61) J Image size indicator (72) B Volume indicator (61)/Protection K Recording mode indicator (72) indicator (66)/Print mark L Volume indicator (72) indicator (69) M Playback indicator (72) C Zoom indicator (63) N Image number/Number of D File name (50) images recorded in the “Memory E Number of pages recorded in Stick” (72) “Memory Stick” (21) O Remaining “Memory Stick” F Remaining “Memory Stick” capacity (72) capacity indicator (21) P Counter (72) G Image number (21) Q Playback screen (72) H Image size indicator (19, 20) R Playback bar (72) I Date/time recorded indicator S Menu/Guide menu (52) (29)/Menu/Guide menu (52) The page numbers in parentheses indicate the location of additional important information., filename[C:\My Documents\_upload job\3075896111\3075896111DSCP7UC\02GB-DSCP7UC\01covIX.fm] masterpage:Left 01cov.book Page 102 Thursday, May 23, 2002 3:57 PM

Additional information

IF ... 50 age Copying images ... 45, 51 File names ... 49 Image file storage destinations ... 49 Image quality ... 19 Image size ... 19, 20, 88 dex ... 32 stallation USB driver ... 42 O ... 89 G ... 50 CD screen display DSPL/LCD ON/OFF ... 28 LCD brightness ... 94 emory Stick Formatting a “Memory Stick” ... 40 Inserting a “Memory Stick” ... 18 Number of shooting images ... 21 The number of images that can be saved/ shooting time ... 88 enu Changing menu ... 52 ode dial ... 9, 52 Control button ... 15 G

Index Copying images ... 45, 51 G A D I

Access lamp ... 18 DC plug ... 10, 95 Im AE/AF lock ... 22, 54 Deleting images ... 36 AE/AF lock lamp ... 9 DIVIDE ... 75 AF ILLUMINATOR ... 93 AF illuminator ... 8, 27 E AF lock ... 54 Editing still images AF lock lamp (green) ... 9 Print mark ... 69 In Auto focus mode ... 55 Protect ... 66 In Auto Power Off feature ... 15 Resize ... 68 A/V connecting cable ... 34 E-MAIL ... 61 IS EV adjustment ... 55

B Exposure J

Battery pack EV adjustment ... 55 JP Battery life ... 12 Charging the battery pack ... 10FLCharging time ... 12 File L Remaining indicator ... 11 File names ... 49 Beep/shutter sound ... 94 Image file storage destinations ... 49 Finder ... 28

C Flash M

CD-ROM ... 42 FLASH LEVEL ... 90, 91 M Charging RED EYE REDUCTION ... 27 Charging the battery pack ... 10 Selecting a flash mode ... 26 Charging time ... 12 Focus Computer AE/AF lock lamp ... 9 Copying images ... 45, 51 AF lock ... 54 Copying movies to your computer ... 77 Focus preset ... 55 M USB cable ... 44 Shooting (using auto adjustment mode) ... 22 USB driver ... 42 FORMAT ... 40 M,

Additional information

filename[C:\My Documents\_upload job\3075896111\3075896111DSCP7UC\02GB-DSCP7UC\01covIX.fm] masterpage:Right 01cov.book Page 103 Thursday, May 23, 2002 3:57 PM Moisture condensation ...95 Setting Scene selection ... 30 electing a flash mode ... 26 hooting close-ups (Macro) ... 24 hooting with the date and time inserted ... 29 pot light-metering ... 56 he number of images that can be saved ... 88 he number of images that can be shot ... 12 sing auto adjustment mode ... 22 sing the self-timer ... 25 hite balance ... 57 oom ... 24 ming ... 64 et ... 34 ... 42, 44 g your camera abroad ... 14 ing single images ... 32 CE ... 61 ings and messages ... 86 igital zoom ... 24 layback zoom ... 63 sing the zoom feature ... 24 Movie Changing menu ... 52 S Continuous shooting ...12 Date and time ... 16 S Copying movies to your computer ...77 Image quality ... 19 S Cutting movies ...75 Image size ... 19, 20, 88 Deleting movies ...73 SET UP ... 52 S Shooting movies ...71 Setting the date and time ... 16 T Viewing ...72 SHARPNESS ... 90 T MPG ...50 Shooting close-ups (Macro) ... 24 U Shooting mode U

N Clip Motion ... 58 W

NR slow shutter ...31 E-MAIL ... 61 Z NTSC ...94 MPEG MOVIE ... 71 Shooting (using auto adjustment mode) ... 22 T Shooting in Multi Burst mode ... 59

P TrimVOICE ... 61

PAL ...94 TV sShooting with the date and time inserted ... 29 Picture effect ...62 Still image playback Power Index (nine images) screen ... 33 U An external power source ...14 Quick Review ... 23 USB Battery pack ...10 ROTATE ... 65 Usin Inserting battery pack ...10 Slide show ... 64 ON/OFF ...15 Using the zoom feature ... 24 V Precautions ...95 Viewing images on a TV screen ... 34 View Viewing single images ... 32 VOI

R Viewing the images on your

RED EYE REDUCTION ...27, 93 computer ... 48, 51 W RESET button ...9, 87 Still image shooting Warn AE/AF lock lamp ... 9

S Auto focus mode ... 55

EV adjustment ... 55 Z Scene selection ...30 Image quality ... 19 Zoom SCN ...30 Image size ... 19 D Self-timer ...25 Number of shooting images ... 21 P Picture effect ... 62 U, 307589611010BCO.FM Page 104 Thursday, May 23, 2002 3:53 PM Printed using VOC (Volatile Organic Compound)-free Additional information on this product and answers to frequent vegetable oil based ink. asked questions can be found at our Customer Support Website. Sony Corporation Printed in Japan,

Reverse 992997641.pdf Revision History

Ver. Date History Contents S.M. Rev. issued 1.0 2002.06 Official Release — —]
15

Similar documents

Note: This equipment has been tested and found to For the Customers in the U.S.A.
DSC-P73 SERVICE MANUAL LEVEL 1 US Model Ver 1.0 2004.04 Canadian Model Revision History AEP Model UK Model E Model Hong Kong Model Australian Model Chinese Model Korea Model Argentine Model Brazilian Model Tourist Model Photo: Silver Japanese Model Link SPECIFICATIONS SELF DIAGNOSIS FUNCTION ORNAMEN
Note: This equipment has been tested and found to For the Customers in the U.S.A.
DSC-P73 SERVICE MANUAL LEVEL 1 US Model Ver 1.1 2005.05 Canadian Model Revision History AEP Model UK Model E Model Hong Kong Model Australian Model Chinese Model Korea Model Argentine Model Brazilian Model Tourist Model Photo: Silver Japanese Model Link SPECIFICATIONS SELF DIAGNOSIS FUNCTION ORNAMEN
DSC-P8 US Model SERVICE MANUAL Canadian Model AEP Model E Model Hong Kong Model Australian Model Chinese Model Korea Model CORRECTION-1 Tourist Model
DSC-P8 LEVEL 2 US Model SERVICE MANUAL Canadian Model AEP Model Ver 1.1 2003. 06 UK Model E Model Hong Kong Model Australian Model Chinese Model Korea Model CORRECTION-1 Tourist Model We will inform you that there are printing errors Japanese Model in the service manual previously issued. • Correcti
DSC-P8 SERVICE MANUAL LEVEL 1 US Model Ver 1.0 2003. 03 Canadian Model Revision History AEP Model UK Model E Model Hong Kong Model Australian Model Chinese Model
DSC-P8 SERVICE MANUAL LEVEL 1 US Model Ver 1.0 2003. 03 Canadian Model Revision History AEP Model UK Model E Model Hong Kong Model Australian Model Chinese Model Korea Model Tourist Model Japanese Model Link SPECIFICATIONS SELF DIAGNOSIS FUNCTION ORNAMENTAL PARTS • INSTRUCTION MANUAL is shown at the
DSC-P8 SERVICE MANUAL LEVEL 2 US Model Canadian Model UK Model E Model Hong Kong Model Australian Model Chinese Model Korea Model Tourist Model Japanese Model
DSC-P8 SERVICE MANUAL LEVEL 2 US Model Ver 1.0 2003. 03 Canadian Model Revision History AEP Model UK Model E Model Hong Kong Model Australian Model Chinese Model Korea Model Tourist Model Japanese Model Link SPECIFICATIONS BLOCK DIAGRAMS PRINTED WIRING BOARDS SERVICE NOTE FRAME SCHEMATIC DIAGRAMS RE
DSC-P8 SERVICE MANUAL LEVEL 2 US Model Canadian Model UK Model E Model Hong Kong Model Australian Model Chinese Model Korea Model Tourist Model Japanese Model
DSC-P8 SERVICE MANUAL LEVEL 2 US Model Ver 1.1 2003. 06 Canadian Model Revision History AEP Model UK Model E Model Hong Kong Model Australian Model Chinese Model Korea Model Tourist Model Japanese Model Link SPECIFICATIONS BLOCK DIAGRAMS PRINTED WIRING BOARDS SERVICE NOTE FRAME SCHEMATIC DIAGRAMS RE
DSC-P8 SERVICE MANUAL LEVEL 2 US Model Canadian Model UK Model E Model Hong Kong Model Australian Model Chinese Model Korea Model Tourist Model Japanese Model
DSC-P8 SERVICE MANUAL LEVEL 2 US Model Ver 1.2 2004.10 Canadian Model Revision History AEP Model UK Model E Model Hong Kong Model Australian Model Chinese Model Korea Model Tourist Model Japanese Model Link SPECIFICATIONS BLOCK DIAGRAMS PRINTED WIRING BOARDS SERVICE NOTE FRAME SCHEMATIC DIAGRAMS REP
DSC-P9 SERVICE MANUAL LEVEL 2 US Model Ver 1.0 2002. 04 Canadian Model UK Model E Model Hong Kong Model Australian Model Chinese Model Korea Model Tourist Model
DSC-P9 SERVICE MANUAL LEVEL 2 US Model Ver 1.0 2002. 04 Canadian Model Revision History AEP Model UK Model E Model Hong Kong Model Australian Model Chinese Model Korea Model Tourist Model Japanese Model Link SPECIFICATIONS BLOCK DIAGRAMS PRINTED WIRING BOARDS SERVICE NOTE FRAME SCHEMATIC DIAGRAMS AD
For the Customers in the U.S.A. Notice on the supplied battery Certain countries may regulate disposal of the battery used to power this product.
DSC-P92 SERVICE MANUAL LEVEL 1 US Model Ver 1.0 2003. 04 Canadian Model Revision History AEP Model UK Model E Model Australian Model Hong Kong Model Korea Model Chinese Model Tourist Model Brazilian Model Japanese Model Link SPECIFICATIONS SELF DIAGNOSIS FUNCTION ORNAMENTAL PARTS • INSTRUCTION MANUA
Note: This equipment has been tested and found to For the Customers in the U.S.A.
DSC-P93 SERVICE MANUAL LEVEL 1 US Model Ver 1.0 2004.03 Canadian Model Revision History AEP Model UK Model E Model Hong Kong Model Australian Model Chinese Model Korea Model Argentine Model Brazilian Model Tourist Model Link SPECIFICATIONS SELF DIAGNOSIS FUNCTION ORNAMENTAL PARTS • INSTRUCTION MANUA
DSC-R1 SERVICE MANUAL LEVEL 1 US Model Ver 1.0 2005.10 Canadian Model UK Model E Model Australian Model Hong Kong Model Chinese Model Korea Model Japanese Model
DSC-R1 SERVICE MANUAL LEVEL 1 US Model Ver 1.0 2005.10 Canadian Model Revision History AEP Model UK Model E Model Australian Model Hong Kong Model Chinese Model Korea Model Japanese Model Tourist Model Link SPECIFICATIONS ACCESSORIES INSTRUCTION MANUAL SERVICE NOTE The components identified by Les c
DSC-R1 SERVICE MANUAL LEVEL 3 US Model Ver 1.1 2005.11 Canadian Model UK Model Hong Kong Model Chinese Model Korea Model Japanese Model Tourist Model
DSC-R1 SERVICE MANUAL LEVEL 3 US Model Ver 1.1 2005.11 Canadian Model Revision History AEP Model UK Model How to use E Model Acrobat Reader Australian Model Hong Kong Model Chinese Model Korea Model Japanese Model Tourist Model Link FRAME SCHEMATIC DIAGRAM PRINTED WIRING BOARDS REPAIR PARTS LIST SCH
DSC-R1 SERVICE MANUAL LEVEL 2 US Model UK Model Hong Kong Model Chinese Model Korea Model Japanese Model Tourist Model
DSC-R1 SERVICE MANUAL LEVEL 2 US Model Ver 1.0 2005.10 Canadian Model Revision History AEP Model UK Model How to use E Model Acrobat Reader Australian Model Hong Kong Model Chinese Model Korea Model Japanese Model Tourist Model Link SPECIFICATIONS BLOCK DIAGRAMS PRINTED WIRING BOARDS SERVICE NOTE FR
DSC-R1 SERVICE MANUAL LEVEL 3 US Model Ver 1.2 2006.05 Canadian Model UK Model Hong Kong Model Chinese Model Korea Model Japanese Model Tourist Model
DSC-R1 SERVICE MANUAL LEVEL 3 US Model Ver 1.2 2006.05 Canadian Model Revision History AEP Model UK Model How to use E Model Acrobat Reader Australian Model Hong Kong Model Chinese Model Korea Model Japanese Model Tourist Model Link FRAME SCHEMATIC DIAGRAM PRINTED WIRING BOARDS REPAIR PARTS LIST SCH
SAFETY-RELATED COMPONENT WARNING!!
DSC-S30/S50 SERVICE MANUAL AEP Model UK Model Level 1 Ver 1.3 2004. 07 Photo: DSC-S30 SPECIFICATIONS System Output connector Operation temperature Storage temperature Image device A/V OUT (Monaural) 32˚F to 104˚F –4˚F to +140˚F 1/2.7 type color CCD (DSC-S50 only) (0˚C to 40˚C) (–20˚C to +60˚C) Minij
SAFETY-RELATED COMPONENT WARNING!!
DSC-S30/S50 SERVICE MANUAL AEP Model UK Model Level 1 Ver 1.1 2000. 09 With SUPPLEMENT-1 (9-929-819-81) Photo: DSC-S30 SPECIFICATIONS System Output connector Operation temperature Storage temperature Image device A/V OUT (Monaural) 32˚F to 104˚F –4˚F to +140˚F 1/2.7 type color CCD (DSC-S50 only) (0˚
- : Points changed portion.
DSC-S30/S50 US Model Canadian Model SERVICE MANUAL AEP ModelUK Model Level2EModel Hong Kong Model Ver 1.3 2004. 07 Australian Model Chinese Model Korea Model Tourist Model Japanese Model CORRECTION-1 File this correction with the service manual. • Correction of SCHEMATIC DIAGRAMS • Correction of EXP
DSC-R1 SERVICE MANUAL LEVEL 2 US Model UK Model Hong Kong Model Chinese Model Korea Model Japanese Model Tourist Model
DSC-R1 SERVICE MANUAL LEVEL 2 US Model Ver 1.1 2005.11 Canadian Model Revision History AEP Model UK Model How to use E Model Acrobat Reader Australian Model Hong Kong Model Chinese Model Korea Model Japanese Model Tourist Model Link SPECIFICATIONS BLOCK DIAGRAMS PRINTED WIRING BOARDS SERVICE NOTE FR
Supplied accessories
DSC-S30/S50 SERVICE MANUAL US Model Ver 1.1 2000. 09 Canadian ModelLevel 2 With SUPPLEMENT-1(9-929-819-82) AEP Model UK Model E Model Hong Kong Model Australian Model Chinese Model Korea Model Tourist Model Photo: DSC-S30 Japanese Model This service manual contains information for Japanese model as
! : Points deleted portion.
DSC-S40 Auto-ADJ SERVICE MANUAL Ver 1.1 2005.11 CORRECTION-1 We will inform you that there are printing errors in the service manual previously issued. • Correction of the Before starting adjustment • Correction of the Table 6-1-1 • Correction of the Service tool DSC-S40 2005K0500-1© 2005.11 9-876-8
& : Points added portion.
DSC-S40 LEVEL 2 US Model SERVICE MANUAL Canadian Model AEP Model Ver 1.2 2005.09 UK Model E Model Australian Model Hong Kong Model Chinese Model Korea Model Japanese Model SUPPLEMENT-1 Tourist Model File this supplement with the service manual. (PV05-041) • Change of Repair Parts Suffix No. of ST-11
SPECIFICATIONS Camera [Power, general]
DSC-S40 SERVICE MANUAL LEVEL 2 US Model Ver 1.0 2005.03 Canadian Model Revision History AEP Model UK Model How to use E Model Acrobat Reader Australian Model Hong Kong Model Chinese Model Korea Model Japanese Model Tourist Model Link SPECIFICATIONS BLOCK DIAGRAMS PRINTED WIRING BOARDS SERVICE NOTE F
SPECIFICATIONS Camera [Power, general]
DSC-S40 SERVICE MANUAL LEVEL 2 US Model Ver 1.1 2005.06 Canadian Model Revision History AEP Model UK Model How to use E Model Acrobat Reader Australian Model Hong Kong Model Chinese Model Korea Model Japanese Model Tourist Model Link SPECIFICATIONS BLOCK DIAGRAMS PRINTED WIRING BOARDS SERVICE NOTE F
TABLE OF CONTENTS
DSC-S30/S50 SERVICE MANUAL US Model Canadian Model Level 3 Ver 1.1 2000. 09 With SUPPLEMENT 1 AEP Model (9-929-819-83) UK Model E Model Hong Kong Model Australian Model Chinese Model Korea Model Tourist Model Photo: DSC-S30 Japanese Model This service manual contains information for Japanese model a
SPECIFICATIONS Camera [Power, general]
DSC-S40 SERVICE MANUAL LEVEL 2 US Model Ver 1.2 2005.09 Canadian Model Revision History AEP Model UK Model How to use E Model Acrobat Reader Australian Model Hong Kong Model Chinese Model Korea Model Japanese Model Tourist Model Link SPECIFICATIONS BLOCK DIAGRAMS PRINTED WIRING BOARDS SERVICE NOTE F
SPECIFICATIONS Camera [Power, general]
DSC-S40 SERVICE MANUAL LEVEL 2 US Model Ver 1.2 2005.09 Canadian Model Revision History AEP Model UK Model How to use E Model Acrobat Reader Australian Model Hong Kong Model Chinese Model Korea Model Japanese Model Tourist Model Link SPECIFICATIONS BLOCK DIAGRAMS PRINTED WIRING BOARDS SERVICE NOTE F
SPECIFICATIONS [System] USB communication
DSC-S45 SERVICE MANUAL US Model Ver 1.0 2006.03 Revision History How to use Acrobat Reader Internal memory ON BOARD Link SPECIFICATIONS DISASSEMBLY REPAIR PARTS LIST SERVICE NOTE BLOCK DIAGRAMS The components identified by Les composants identifiés par une mark 0 or dotted line with marque 0 sont cr
SPECIFICATIONS [System] [LCD screen]
DSC-S500 SERVICE MANUAL US Model Ver 1.2 2006.09 Canadian Model Revision History AEP Model UK Model How to use Acrobat Reader E Model Australian Model Hong Kong Model Internal memory Korea Model ON BOARD Link SPECIFICATIONS DISASSEMBLY REPAIR PARTS LIST SERVICE NOTE BLOCK DIAGRAMS The components ide
SPECIFICATIONS [System] [LCD screen]
DSC-S500 SERVICE MANUAL US Model Ver 1.1 2006.07 Canadian Model Revision History AEP Model UK Model How to use Acrobat Reader E Model Australian Model Hong Kong Model Internal memory Korea Model ON BOARD Link SPECIFICATIONS DISASSEMBLY REPAIR PARTS LIST SERVICE NOTE BLOCK DIAGRAMS The components ide
These specifications are extracted from instruction
DSC-S600 SERVICE MANUAL LEVEL 2 US Model Ver 1.0 2005. 12 Canadian Model Revision History AEP Model UK Model How to use E Model Acrobat Reader Australian Model Chinese Model Internal memory Brazilian Model ON BOARD Hong Kong Model Korea Model Link SPECIFICATIONS BLOCK DIAGRAMS PRINTED WIRING BOARDS