Download: DSC-P8 SERVICE MANUAL LEVEL 2 US Model Canadian Model UK Model E Model Hong Kong Model Australian Model Chinese Model Korea Model Tourist Model Japanese Model

DSC-P8 SERVICE MANUAL LEVEL 2 US Model Ver 1.2 2004.10 Canadian Model Revision History AEP Model UK Model E Model Hong Kong Model Australian Model Chinese Model Korea Model Tourist Model Japanese Model Link SPECIFICATIONS BLOCK DIAGRAMS PRINTED WIRING BOARDS SERVICE NOTE FRAME SCHEMATIC DIAGRAMS REPAIR PARTS LIST DISASSEMBLY SCHEMATIC DIAGRAMS • For ADJUSTMENTS (SECTION 6), refer to SERVICE MANUAL, ADJ (987622651.pdf). • For INSTRUCTION MANUAL, refer to SERVICE MANUAL, LEVEL 1 (987622641.pdf). • This service manual contains information for Japanese model as well. • Reference No. search on prin...
Author: Acal1978 Shared: 8/19/19
Downloads: 1650 Views: 3353

Content

DSC-P8 SERVICE MANUAL LEVEL 2 US Model Ver 1.2 2004.10 Canadian Model

Revision History AEP Model

UK Model E Model Hong Kong Model Australian Model Chinese Model Korea Model Tourist Model Japanese Model Link

SPECIFICATIONS BLOCK DIAGRAMS PRINTED WIRING BOARDS SERVICE NOTE FRAME SCHEMATIC DIAGRAMS REPAIR PARTS LIST DISASSEMBLY SCHEMATIC DIAGRAMS • For ADJUSTMENTS (SECTION 6), refer to SERVICE MANUAL, ADJ (987622651.pdf). • For INSTRUCTION MANUAL, refer to SERVICE MANUAL, LEVEL 1 (987622641.pdf). • This service manual contains information for Japanese model as well. • Reference No. search on printed wiring boards is available. • Note in Lens Frame Installation • BARRIER OPERATION TEST METHOD • HELP: Sheet attachment positions and procedures of processing the flexible boards/harnesses are shown. On the JK-243, JK-244 and SY-83 boards JK-243, JK-244 boards This service manual procides the information that is premised Schematic diagram ... Pages 4-35 to 4-36 the circuit board replacement service and not intended repair Printed wiring board ... Pages 4-51 to 4-52 inside the JK-243, JK-244 and SY-83 boards. Electrical parts list ... Pages 5-6 Therefore, schematic diagram, printed wiring board and SY-83 board electrical parts list of the JK-243, JK-244 and SY-83 boards are Schematic diagram ... Pages 4-9 to 4-28 not shown. Printed wiring board ... Pages 4-43 to 4-46 The following pages are not shown. Electrical parts list ... Pages 5-9 to 5-13 The above-described information is shown in service manual Level 3.

DIGITAL STILL CAMERA

,

COVER SPECIFICATIONS

x Camera [Output connectors] xAC-LS5 AC Adaptor [System] A/V OUT (MONO) (Monaural) Rated input voltage Image device Minijack 100 to 240 V AC, 50/60 Hz, 11 W, 6.67 mm (1/2.7 type) color CCD Video: 1 Vp-p, 75 Ω, unbalanced, 0.16 to 0.09 A Primary color filter sync negative Rated output voltage Total pixels number of camera Audio: 327 mV (at a 47 kΩ load) DC 4.2 V, 1.5 A in operating mode Approx. 3 340 000 pixels Output impedance 2.2 kΩ Operating temperature Effective pixels number of camera USB jack mini-B 0°C to 40°C (32°F to 104°F) Approx. 3 210 000 pixels Storage temperature Lens 3× zoom lens [LCD screen] –20°C to +60°C (–4°F to +140°F) f = 6.0 – 18.0 mm (1/4 – Used LCD panel Dimensions 23/32 inches) (39 – 117 mm 3.8 cm (1.5 type) TFT drive Approx. 48×29×81 mm (1 9/16 – 4 5/8 inches) when (1 15/16×1 3/16×3 1/4 inches) converted to a 35 mm still camera) Total number of dots (W/H/D) F2.8 – 5.2 123 200 (560×220) dots Mass Approx. 130 g (5 oz) Exposure control Automatic exposure, Scene selection [General] (7 modes) xNP-FC11 battery pack Used battery pack White balance Used battery NP-FC11 Flash, Automatic, Daylight, Cloudy, Lithium-ion battery Fluorescent, Incandescent Power requirements Maximum voltage 3.6 V Data format (DCF compliant) DC 4.2 V Still images: Exif Ver. 2.2 JPEG Power consumption (during shooting) Nominal voltage compliant, GIF (for Clip Motion), 1.5 W DC 3.6 V DPOF compatible Operating temperature Capacity 2.8 Wh (780 mAh) Audio with still image: 0°C to 40°C (32°F to 104°F) MPEG1 compliant (Monaural) Storage temperature Moving images: –20°C to +60°C (–4°F to +140°F) Accessories MPEG1 compliant (Monaural) Dimensions • NP-FC11 battery pack Recording media 108×51.5×35.1 mm “Memory Stick” • AC-LS5 AC Adaptor(4 3/8×2 1/8×1 7/16 inches) Flash Recommended distance (ISO set to (W/H/D, excluding maximum • Power cord (mains lead) Auto): 0.5 m to 3.5 m (19 3/4 inches protrusions) • A/V connecting cable to 11 feet 5 3/16 inches) (W) Mass Approx. 200 g (7 oz) (including • USB cable 0.5 m to 2.5 m (19 3/4 inches to 8 feet battery pack NP-FC11, “Memory • Wrist strap 2 7/16 inches) (T) Stick” and wrist strap) • “Memory Stick” (16 MB) Built-in microphone Electret condenser microphone • CD-ROM (USB driver SPVD-010) Built-in speaker • Operating instructions Dynamic speaker Design and specifications are subject to change Exif Print Compatible without notice. PRINT image matching II Compatible — 2 —, SAFETY-RELATED COMPONENT WARNING!! ATTENTION AU COMPOSANT AYANT RAPPORT À LA SÉCURITÉ! COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE WITH LES COMPOSANTS IDENTIFÉS PAR UNE MARQUE 0 SUR LES MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU PUBLISHED BY SONY. DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.

SAFETY CHECK-OUT

After correcting the original service problem, perform the following safety checks before releasing the set to the customer. 1. Check the area of your repair for unsoldered or poorly-soldered Unleaded solder connections. Check the entire board surface for solder splashes Boards requiring use of unleaded solder are printed with the lead- and bridges. free mark (LF) indicating the solder contains no lead. 2. Check the interboard wiring to ensure that no wires are (Caution: Some printed circuit boards may not come printed with the lead free mark due to their particular size.) "pinched" or contact high-wattage resistors. 3. Look for unauthorized replacement parts, particularly transistors, that were installed during a previous repair. Point : LEAD FREE MARK them out to the customer and recommend their replacement. Unleaded solder has the following characteristics. 4. Look for parts which, through functioning, show obvious signs • Unleaded solder melts at a temperature about 40°C higher than of deterioration. Point them out to the customer and ordinary solder. recommend their replacement. Ordinary soldering irons can be used but the iron tip has to be applied to the solder joint for a slightly longer time. 5. Check the B+ voltage to see it is at the values specified. Soldering irons using a temperature regulator should be set to 6. Flexible Circuit Board Repairing about 350°C. • Keep the temperature of the soldering iron around 270˚C Caution: The printed pattern (copper foil) may peel away if the during repairing. heated tip is applied for too long, so be careful! • Do not touch the soldering iron on the same conductor of the • Strong viscosity circuit board (within 3 times). Unleaded solder is more viscous (sticky, less prone to flow) than • Be careful not to apply force on the conductor when soldering ordinary solder so use caution not to let solder bridges occur such or unsoldering. as on IC pins, etc. • Usable with ordinary solder It is best to use only unleaded solder but unleaded solder may also be added to ordinary solder. — 3 —, TABLE OF CONTENTS Section Title Page 1. SERVICE NOTE 1-1. Note for Repair ································································ 1-1 1-2. Discharging of the ST-81 Flexible Board’s Charging Capacitor (C001) ····························································· 1-1 1-3. Precaution on Replacing the Video Lens or the SY-83 Board ··············································································· 1-2 1-4. Note in Lens Frame Installation ······································ 1-2 1-5. Description on Self-diagnosis Display ···························· 1-3 2. DISASSEMBLY 2-1. Battery Lid ······································································· 2-3 2-2. Cabinet (Rear) Assembly ················································· 2-3 2-3. LCD Module ···································································· 2-4 2-4. Cabinet Front Assembly ·················································· 2-4 2-5. Control Switch Block ······················································ 2-5 2-6. Cabinet (Lower) Assembly ·············································· 2-6 2-7. Lens Block Assembly ······················································ 2-6 2-8. ST-81 Board ····································································· 2-7 2-9. SY-83 Board ···································································· 2-7 2-10. MS-130 Board ································································· 2-8 2-11. SW-386 Board ································································· 2-8 2-12. JK-244 Board ·································································· 2-9 2-13. Barrier Unit ···································································· 2-10 2-14. Circuit Boards Location ················································ 2-11 3. BLOCK DIAGRAMS 3-1. Overall Block Diagram (1/2) ··········································· 3-1 3-2. Overall Block Diagram (2/2) ··········································· 3-3 3-3. Power Block Diagram (1/2) ············································· 3-5 3-4. Power Block Diagram (2/2) ············································· 3-7 4. PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS 4-1. Frame Schematic Diagrams ············································· 4-1 4-2. Schematic Diagrams ························································ 4-5 CD-432 (CCD IMAGER) ··············································· 4-7 SW-386 (1/2) (CONTROL SWITCH) ·························· 4-29 SW-386 (2/2) (LCD DRIVE, TIMING GENERATOR) ····················· 4-31 ST-81 (FLASH DRIVE) ··············································· 4-33 MS-130 (MEMORY STICK CONNECTOR) ·············· 4-37 CONTROL SWITCH BLOCK ····································· 4-38 4-3. Printed Wiring Boards ··················································· 4-39 CD-432 ·········································································· 4-41 SW-386 ·········································································· 4-47 ST-81 ············································································· 4-49 MS-130 ·········································································· 4-53 4-4. Waveforms ····································································· 4-56 4-5. Mounted Parts Location ················································ 4-57 5. REPAIR PARTS LIST 5-1. Exploded Views ······························································· 5-2 5-1-1.Cabinet Section ································································ 5-2 5-1-2.Lens Section ···································································· 5-3 5-1-3.Battery Holder Section ···················································· 5-4 5-2. Electrical Parts List ························································· 5-5 — 4 —,

Ver 1.2 2004.10 DSC-P8

COVER SECTION 1

SERVICE NOTE

1-1. NOTE FOR REPAIR Make sure that the flat cable and flexible board are not cracked of When remove a connector, don’t pull at wire of connector. bent at the terminal. It is possible that a wire is snapped. Do not insert the cable insufficiently nor crookedly. When installing a connector, don’t press down at wire of connector. It is possible that a wire is snapped. Cut and remove the part of gilt which comes off at the point. (Be careful or some pieces of gilt may be left inside) 1-2. DISCHARGING OF THE ST-81

FLEXIBLE BOARD’S CHARGING CAPACITOR (C001)

The charging capacitor (C001) of the ST-81 flexible board is charged Discharging the Capacitor up to the maximum 300 V potential. Short-circuit between the positive and the negative terminals of There is a danger of electric shock by this high voltage when the charged capacitor with the short jig about 10 seconds. capacitor is handled by hand. The electric shock is caused by the charged voltage which is kept without discharging when the main R:1 kΩ/1 W power of the unit is simply turned off. Therefore, the remaining (Part code: voltage must be discharged as described below. Capacitor 1-215-869-11) Preparing the Short Jig To preparing the short jig, a small clip is attached to each end of a resistor of 1 kΩ /1 W (1-215-869-11). ST Wrap insulating tape fully around the leads of the resistor to prevent -81 electrical shock. 1 kΩ/1 W Wrap insulating tape. 1-1, 1-3. PRECAUTION ON REPLACING THE 1-4. NOTE IN LENS FRAME

VIDEO LENS OR THE SY-83 INSTALLATION BOARD

When tightening a screw, have both sides of the lens block assembly so as not for the load to depend. The DSC-P8 uses the position sensor to detect the zoom position. Accordingly, the zoom position will vary if the position data M1.7 × 4 changes due to the replacement of the video lens or the SY-83 board, thus causing the video lens to collide against the mechanism Lens frame end when the power is turned off. Lens block assembly Though the position data is calibrated at the “Flange Back Adjustment”, add the following work when making an adjustment at the replacement of video lens to prevent a collision of video lens. When Replacing the Video Lens 1) With current video lens assembled, turn the power on, and set the data of page: 6F, address: 3E to “FF”, then turn the power M1.7 × 4 off. 2) Replace the video lens with a new one, turn the power on, and perform the “Flange Back Adjustment”. Thus, new position data will be written. When Replacing the SY-83 Board 1) Replace the SY-83 board with a new one, set the mode dial to “PLAY”, turn the power on, and set the data of page: 6F, address:3E to “FF”, then turn the power off. 2) Set the mode dial to “CAMERA”, turn the power on, and perform the “Flange Back Adjustment”. Thus, new position data will be written. 1-2, 1-5. DESCRIPTION ON SELF-DIAGNOSIS DISPLAY Self-diagnosis display • C: ss: ss You can reverse the camera malfunction yourself. (However, contact your Sony dealer or local authorized Sony service facility when you cannot recover from the camera malfunction.) • E: ss: ss Contact your Sony dealer or local authorized Sony service facility. Display Code Countermeasure Cause Caution Display During Error C:32:ss Turn the power off and on again. Trouble with hardware. SYSTEM ERROR Format the “Memory stick”. Unformatted memory stick is inserted. FORMAT ERROR C:13:ss Insert a new “Memory Stick”. Memory stick is broken. MEMORY STICK ERROR E:61:ss Checking of lens drive circuit. When failed in the focus and zoom initialization. — Checking of flash unit or replacement Abnormality when flash is being E:91:ss of flash unit. charged. 1-3E, COVER SECTION 2

DISASSEMBLY HELP

The following flow chart shows the disassembly procedure.

DISASSEMBLY DISASSEMBLY

DISASSEMBLY DISASSEMBLY

HELP

Discharging the Capacitor DISASSEMBLY DISASSEMBLY HELP HELP

DISASSEMBLY DISASSEMBLY DISASSEMBLY

DISASSEMBLY HELP SERVICE POSITION

DISASSEMBLY

DISASSEMBLY HELP 2-1, [SERVICE POSITION] Color monitor JK-244 board SW-386 board LCD module AC power AC IN adaptor SY-83 board SW-386 Back light unit ST-81 board SY-83 Memory stick connector Control switch assembly Lens block assembly The procedure for a service position 1 2-2. CABINET (REAR) ASSEMBLY ... (PAGE 2-3) 2 2-3. LCD MODULE ... (PAGE 2-4) 3 2-4. CABINET FRONT ASSEMBLY ... (PAGE 2-4) 4 2-5. CONTROL SWITCH BLOCK ... (PAGE 2-5) 5 2-6. CABINET (LOWER) ASSEMBLY ... (PAGE 2-6) 6 2-7. LENS BLOCK ASSEMBLY ... (PAGE 2-6) 7 2-8. ST-81 BOARD ... (PAGE 2-7) 8 2-9. SY-83 BOARD ... (PAGE 2-7) 9 2-10. MS-130 BOARD ... (PAGE 2-8) 0 2-11. SW-386 BOARD ... (PAGE 2-8) qa 2-12. JK-244 BOARD ... (PAGE 2-9) 2-2, Note: Follow the disassembly procedure in the numerical order given. 2-1. BATTERY LID 4 Lid battery 2 Two claws 1 Open the BT lid. 3 BT stopper 2 Screw (1.7 × 3) 2-2. CABINET (REAR) ASSEMBLY 2 Two screws (M1.7) 4 Screw (M1.7) 5 Cabinet (rear) assembly 1 Open the jack cover. 3 Screw (M1.7) 2-3, 2-3. LCD MODULE

HELP

2 Claw36Two bosses 4 Flexible board (CN103) 7 Two bosses 1 TWO Screws 8 LCD module (special) 5 Flexible board (CN101) 2-4. CABINET FRONT ASSEMBLY 1 Screw (M1.7) 2 Two screws 3 Cabinet front assembly (M1.7) 2-4, 2-5. CONTROL SWITCH BLOCK

HELP

Note: High-voltage cautions Discharging the Capacitor Short-circuit between the positive and the negative terminals of charged capacitor 1 Claw with the short jig about 10 seconds. R:1 kΩ/1 W (Part code: Capacitor 1-215-869-11) 3 ST-81 2 Claw 6 Flexible board (CN804) 7 Control switch block 5 Connector (CN803) 4 Tape (A) 2-5, 2-6. CABINET (LOWER) ASSEMBLY 3 Claw 4 Cabinet (lower) assembly 2 Claw Insert the driver Note: To disengage the claw, pass a flat headed 1 for removing the claw. driver under the flexible cable. It may be a cause of breakage of the flexible Note: High-voltage cautions cable to pass a flat headed driver above the (See page 2-5) flexible cable. 2-7. LENS BLOCK ASSEMBLY

HELP

1 Flexible board (CN151) 2 Flexible board (CN301) Note: High-voltage cautions (See page 2-5) 3 Claw 4 Claw SY insulating sheet 5 Lens block assembly 2-6, 2-8. ST-81 BOARD Note: High-voltage cautions (See page 2-5) 3 ST-81 board 1 Flexible board (CN351) 2 Claw 2-9. SY-83 BOARD

HELP

4 Screw 2 Flexible board (CN805) 3 Flexible board1 Tape (A) (CN801) 5 Claw 9 SY-83 board 6 Note: As removing the flexible board (removing the SY-83 board CN802 means removing the lithium 3V power supply (BT001), data such as date, time, user-set menus will be lost. After assembling, reset these data. 7 SY retainer sheet 8 Flexible board (CN802) 2-7, 2-10.MS-130 BOARD 2 Claw 1 Screw 3 MS-130 board 2-11.SW-386 BOARD

HELP

2 Two screws 6 Two bosses JK-244 board 0 SW-386 board 1 Flexible board (CN805) 7 boss 3 Boss 9 Insulating sheet (LI) 5 Two screws Note: When you remove the sheet, be careful not to remove a battery together. 2-8, 2-12.JK-244 BOARD 4 JK-244 board 1 Two claws 3 Claw 2 Boss 2-9, 2-13.BARRIER UNIT 5 Ornamental fixed plate (A) 1 Switch on a power supply. 6 Two screws 2 Push zoom button and transform the lens (M1.4 × 4.5) as shown below. 3 Switch off a power supply by taking out a battery or cut off a power supply from AC daptor. 7 Barrier unit (without using camera's power swich)

A

4 Pinch A portion with finger and fit a driver over a hollow. [BARRIER OPERATION TEST METHOD] After the barrier unit is replaced, check the following items with turning the power of the set ON/OFF. • The lens moves out and the barrier shutters open completely when the power is turned on. • The lens moves in and the barrier shutters close completely when the power is turned off. Checking condition is 1 downward 2 45° downward 3 horizontal 4 45° upward 5 upward; totally five positions and check three times for each position. 3X 3X 3X 1 downward 2 45° downward 3 horizontal 4 45° upward 5 upward The test needs to be performed only when the barrier unit is replaced. No performance of this test is needed when the lens is replaced. 2-10 3X 3X, 2-14.CIRCUIT BOARDS LOCATION SW-386 ST-81 MS-130 CD-432 SY-83 JK-244 (including JK-243) Board Name Function CD-432 CCD IMAGER JK-244 JACK (including JK-243) MS-130 MEMORY STICK CONNECTOR ST-81 FLASH DRIVE SW-386 CONTROL SWITCH, LCD DRIVE, TIMING GENERATOR SY-83 CAMERA MODULE, CAMERA DSP, 128M SDRAM, VIDEO AMP, LENS DRIVE, SH DSP, 16M FLASH MEMORY, CLOCK GENERATOR, FRONT CONTROL, AUDIO, FLASH CONTROL, DC/DC CONVERTER 2-11E, 2003.03.04 Update

HELP

Sheet attachment positions and procedures of processing the flexible boards/harnesses are shown.

MAIN BLOCK SECTION

Tape (A) Lens frame SY insulating sheet Tape (A) Video lens Strobo shade the light sheet SW-386 board Insulating sheet (LI) SY-83 board Insulating sheet (LI) Secondary lithium battery SY retainer sheet

LCD

tape (K)

HELP

,

COVER

3. BLOCK DIAGRAMS Link OVERALL BLOCK DIAGRAM (1/2) POWER BLOCK DIAGRAM (1/2) OVERALL BLOCK DIAGRAM (2/2) POWER BLOCK DIAGRAM (2/2),

COVER SECTION 3 3. BLOCK DIAGRAMS BLOCK DIAGRAMS

3-1. OVERALL BLOCK DIAGRAM (1/2) ( ) : Number in parenthesis ( ) indicates the division number of schematic diagram where the component is located. LENS BLOCK

SY-83 BOARD (1/2) SW-386 BOARD (1/2)

LENS CD-432 BOARD CN802 PANEL UNIT

IRIS

Q605 (1/2) CN103(METER) Q002 CN151 25 212 BUFFER PANEL R 28 40 19 VR 4 IC001 10 BUFFER CCD OUT − 146ıCA AD00 – AD13 12 14 16 20 VG 5 LCD901 IC152 38 18 − 27 Q604 IC101 VB CCD 207 BUFFER PANEL G 27 39 21 3 IMAGER CAMERA Q101, 1021255LCD DRIVE, COLOR 17 RG, H1, H272MODULE Q603 PSIG

PSIG

46 CA HD TIMING 25 6 1833(1/10) 8 204 BUFFER PANEL B 26 38 GENERATOR DRIVE

LCD

(2/2) MONITORSHUTTER ZOOM FOCUS IRIS RGT, HCK1,HDO 2 MOTOR MOTOR MOTOR MOTOR 22 CA FD 225 12 43 HCK2, HST,47 9 7ı IC601 229 PANEL VV1, V2, V3A, V3B, 16 42234WIDE, DWN, EN,MMMM81 V4, V5A, V5B, V6 25 14 15 VCK, VST, COM ı 10 14 − 1727 CAMERA DSP, 17 47 23 32 − 358ı19 20 49 MCK12 128M SDRAM 13 29 96 46(2/10) 21 19 33 369ıZOOM FOCUS 41 42 28 BL LEV35 31 SENSOR SENSOR 45 29TH001 CN101 D901 CCD TEMP CCD TEMP 20 48 TG CLK 88 6 BL THHSENSOR 6 Q002 34 PRE LAMP X50139 27MHz IC50241BL L BACKLIGHT D001 2 CLOCK MC CLK1 116 2 SELF TIMER/ GENERATOR 11 U CLK AF ILLUMINATOR (6/10) XAE LOCK LED D007 9 AE/AF LOCK (GREEN) IC301 BL L LENS DRIVER (4/10) BL ON 3

OVERALL (2/2)

(PAGE 3-4) HR EN0, Q606 CN301 20 HR DIR0A, 215 CV OUT BUFFER CV OUT 21 FOCUS A, A, B, B ı 21 FOCUS 5 HR DIR0B 233 ı 24 23 MOTORı8235 278 AU AINL AU AINL 24 DRIVER 272 AU AOUT AU AOUT SP VOL HR EN1, 37 HR DIR1A, 1 ZOOM A, A, B, B 38 ZOOM 1 HR DIR1B 237ı MOTORıı50 XAU SP MUTE 1 OVERALL (2/2)4 41 DRIVER 4 239 29 XAU LINE MUTE (PAGE 3-3)42 19 124 AU HGL SEL 25 XAU POWER SAVE IRIS M IN 14 10 195 10 IRIS M±, S± 15 IRIS 9 IRIS M ENı 191 Q501 238 13 17 MOTOR 12 IRIS S IN USB D± 194 239 18 DRIVER

LED

11 IRIS S EN XRST SYS 35 188 94 DRIVE IC501 MC CAM, D802 14 47 MSHUT ON 246 SH DSP, (MS ACCESS)SHUTTER± ı 43 MEMORY46 SHUTTER 48 MSHUT EN 16M FLASH 17 196 MS-130 BOARD STICKMOTOR SYS V (5/10) LENS 227 164 216 CN801 CN001DRIVER TEMP TEMP OUT 6 31 MSHUT REF MS DIO, MS BS, SENSOR 39 41 - 45 213 3 MS SCLK 8 65 - 69 ı MS DIO, MS BS, MS SCLK54XFC RST SENS 192 71 - 81 MC D00 - D15 47 49 51 52 2157218 232 54 56 - 60 62 - 64 66 8 187 68 - 70 72 XZM RST SENS1, 2 184 29 - 41 27 43 - 54 MC A01 - A25 73 75 76 EEPROM, 236 78 79 81 SO, SI, SCK IC504 83 - 88 90 202 2 STRB ON 248 92 93 95 97ııEEPROM 204 4 (6/10) CAM SO, XCAM SCK, XCAM RESET 200 Q151 PRELAMP AF ON

ST-81 BOARD LED

C001 DRIVE SELF TIMER LED DAC STB86CAM SO, XCAM SCK FLASH CHARGING D001 T001 Q002, 003 CN351 CAPACITOR Q352, 353 IC503 UNIT XE_A (H) ST UNREG 4 MSHUT REF EVR SP VOL51ıACV UNREG123UCLK 9 (D/A CONV.) 184 MC CLK1 FR SI, FR SO, XFR SCK + 190 4 TRANS STB CHARGE PRELAMP AF ON (6/10) 187 1 191 2 DRIVE XSTRB PWR SAVE31XSTB FULL CCD TEMP L001 230 TRIGGER TEMP OUT 229 140 STB FULL 3 Q354 XRST SYS 2 OVERALL (2/2)SYS V (PAGE 3-3) XE K (L) XSTRB PWR SAVE SELF TIMER LED IC351 (9/10) STB CHARGE

A : VIDEO SIGNAL XSTB FULL

Q004 STB ON124FLASH XSTRB PWR SAVECONTROL2A: AUDIO SIGNAL

A : VIDEO/AUDIO SIGNAL

3-1 3-2 CAM SO, XCAM SCK, XCAM RESET CAM SO, XCAM SCK,

COVER 3. BLOCK DIAGRAMS

3-2. OVERALL BLOCK DIAGRAM (2/2) ( ) : Number in parenthesis ( ) indicates the division number of schematic diagram where the component is located.

SY-83 BOARD (2/2) JK-244 BOARD

CN805 (1/2)

JK-243 BOARD

(1/2) IC101 (1/2) CV OUT J0026 VIDEO AMP4VOUT 31 V OUT (3/10) AU OUT 30 AU OUT A/V OUT (MONO) AV JACK IN AV JACK IN CN002 USB D± USB D 33± 34 USB D± USB D ± 3

OVERALL (1/2)

(PAGE 3-2) 1 (USB) USB JACK IN USB JACK IN VCC 35 1 AU AINL H4 B4 AU AOUT H5 A2 SP ± 39 SP ± SP901 SP VOL D1 38J3 SPEAKER XAU SP MUTE B2 IC201 XAU LINE MUTE C8 AUDIO AMP AU HGL SEL G8 (8/10) XAU POWER SAVE CONTROL SWITCH BLOCKH9 CN804 Q402 USB JACK IN POWER91XPWR ON 14 XPWR ON AV JACK IN 11 XSHTR ON XSHTR ON (SHUTTER)CN803 Q40742MIC901 MIC SIG BEEP2 B8 E1 MODULATOR 74 MICROPHONE XAE LOCK SW XAE LOCK SW BEEP ON51F2 4 MODE DIAL1, XPB ON, 49 2 35 MODE DIAL1, XSET UP, XPB ON 8 XMOVIE, XSET UP MODE7654 9 DIALSW-386 BOARD (2/2) CN802 FR 4V IC403 BACKUP VCC 10 (2/2) 39 VL 3V 3 INITIAL RESET, 5 XRESET 73 IC402 Q410 BT001 LITHIUM BACK UP VCC S401 XPWR LED ON LED XPWR LED (POWER)FRONT 17 11 BATTERY D402 (7/10) 8 EVER 3.0V RESET CONTROLLER

DRIVE

2 (7/10) IC003 BATT UNREG1 D006 FR 4V DC/DC CONVERTER ACV UNREG1 TALLY XTALLY LED XTALLY LED (RED) 13 15 (10/10) Q409 D008 XCHARGE LED LED CHARGE ST LED FLASH/CHG 11 DRIVE 16 FB2 59 BL L(ORANGE) OVERALL (1/2) S003-010 IN2– 60D 1.5V BL ON 3 (PAGE 3-2) FUNCTION KEY AD0, 1 8 KEY AD0, 1 55 ONOFF2 48D 2.9V KEY 10 56 PANEL 2.9V IC001 A 2.9V ACV UNREG1 S002 (ZOOM SW) S001 CAM 3.2V DC/DC CONTROL JK-244 BOARDTW(10/10) (2/2) JK-243 BOARDCAM P5V CAM 15V CN805 (2/2) CAM –7.5V (2/2) 17 ACV UNREG1 ACV UNREG1 ACV UNREG1ı J001 KEY AD3 24 DC IN 19 58 2021 UNREG SO, UNREG SCK 45 Q001, 002 46 BATT/XEXT BATT/XEXT FAST CHARGE 3729 GND X401 Q005, 006 10MHz 28 INIT CHARGE X402 32.768kHz 52 D003 1 BATT UNREG1 BATT UNREG1 BATT UNREG1 ı + 23 BATT/XEXT 8 FR SI, FR SO, XFR SCK FR SI, FR SO, XFR SCK ı BT901 25 BATT SIG BATT SIG BATT SIG Q408 36 S BATTERY XRST SYS XRST SYS TERMINAL 77 43 BATTERY BATT SIG 9

OVERALL (1/2) SYS V SYS V CHARGE BATT GND2 32 42 DETECTOR ı

− (PAGE 3-2) 16SELF TIMER LED SELF TIMER LED 19 47 INIT CHARGE STB CHARGE STB CHARGE 46 48 FAST CHARGE XSTB FULL XSTB FULL 34 8 BATT/XEXT XSTRB PWR SAVE XSTRB PWR SAVE A : VIDEO SIGNAL

A : AUDIO SIGNAL

05 A : VIDEO/AUDIO SIGNAL 3-3 3-4,

COVER 3. BLOCK DIAGRAMS

3-3. POWER BLOCK DIAGRAM (1/2) ( ) : Number in parenthesis ( ) indicates the division number of schematic diagram where the component is located.

SY-83 BOARD (1/2)

J001 JK-244 BOARD DC IN JK-243 BOARD CN805 F002 ACV UNREG1 ACV UNREG1 17 ı BATT/XEXT 24BATT/XEXT Q001, IC002 F00137 CONTROL SWITCH BLOCK GND FAST CHARGE CN804 PWR LED VCC INIT CHARGE D009

POWER

F004 D007 D011 IC003 D 2.9VQ005, 006 D0033D2.9V BATT CHARGE (10/10) BATT UNREG1 UNREG1 1 CONTROL F003 D006 L009 L010 D008 + ı DC/DC 8 CONVERTER BATT/XEXT BT901 BATT SIG BATT SIG FR 4V BATTERY S BATT SIG 36 EVER 3.0V TERMINAL DD CON SENS – BATT GND GND ı IC001 DC/DC CONTROL Q010, 014 (10/10) L007 SWITCHING D 1.5V VCC2 41 OUT 1p 36 OUT 1n 37 VIN 1– 55 Q011, 015 L008 D 2.9V

SWITCHING ST-81 BOARD OUT 3p 32 A 2.9V

T001 CN351 OUT 3n 33 PANEL 2.9V Q352, 353 4 L351FLASH ı ST UNREG VIN 3– 54 UNIT 47 RST BL THL9 VCC3 42 VCC5 20 L005 Q016, 018 Q019 (1/2)

SW-386 BOARD EVER 3.0V SWITCHING56 VCC1

CN802 IC403 L401 OUT 5p 38 39 VL 3V INITIAL RESET, OUT 5n 39 BT001 BACK UP VCC LITHIUM D402 (7/10) OUT 5S 43 POWER 2 BATTERY VIN 5– 52 A Q007 (PAGE 3-7) L001 D004 BL H IC402 SWITCHING FRONT CONTROLLER (7/10) OUT 2n 35 Q003, 009 L006 OVP2 58 CAM 3.2VSWITCHING BACKUP VCC 66 DD CON SENS OUT 4p 30 68 ACV SENS OUT 4n 31 67 BATT SENS VIN 4– 53 Q013, 017 Q019 (2/2) FAST CHARGE L00348 FAST CHARGE CAM P 5VSWITCHING INIT CHARGE 47 INIT CHARGE BATT/EXT OUT 6p 28 8 BATT/XEXT OUT 6n 29 Q408 OUT 6S 18 L002 Q012 D014 BATT SIG BATTERY 43 BATT SI CAM 15VCHARGE VIN 6– 50 SWITCHING DETECTOR 42 BATT SO VCC4 19 STB CHARGE 46 STB CHG SYS DD ON OUT 9 23 SYS DD ON 76 57 CONT FB9 79 XCS DDCON 22 XCS DDCON 44 XCS UNREG SO 20 UNREG SO IN 9– 80 45 DATA Q008 UNREG SCK 21 UNREG SCK SCP9146 CLK CAM –7.5VSWITCHING OUT 10 22 AMP IN 4 AMP OUT 5 IN 10− 3 FB10 2 3-5 3-6,

COVER 3. BLOCK DIAGRAMS

3-4. POWER BLOCK DIAGRAM (2/2) ( ) : Number in parenthesis ( ) indicates the division number of schematic diagram where the component is located.

SW-386 BOARD PANEL UNIT

IC001 CN802 (1/2)

SY-83 BOARD (2/2) Q103 CN103

37 CAM15V 13.5V VDD 38 REG 18 D101

VDDG

16 16 LCD P OFF COLORCRext 9 LCD PANEL 2.9V 14 PANEL 2.9V L102 MONITOR 15 D007 IC101 11 REF AE/AF LOCK LCD DRIVER, (GREEN) TIMING GENERATOR D006 (2/2)

TALLY

(RED) D008 EVER 3.0V EVER 3.0V FLASH/CHG 7 (ORANGE) CN101 D901 BL THL BL THL BL THL54BACK LIGHT BLH3BLH3BL H FB1534 L152 IC152

CAMERA

L154 FB154 MODULE (1/10) L153 FB152

CD-432 BOARD

Q152 – 155 CN151FB155 CAM 15V CAM 15V L151 CAM 15V 11 IC001 FB156 FB001 CAM −7.5V CAM −7.5V CAM −7.5V CCD IMAGER

POWER 1 10

(PAGE 3-6) A CAM P 5V CAM P 5V CAM P 5V D00138 SELF TIMER/ AF ILLUMINATOR CAM 3.2V CAM 3.2V CAM DD ON 198 PTM 6 MS POWER ON 30 D32/PTA 7 D802 D 2.9V D 2.9V IC501 (MS ACCESS) D 1.5V D 1.5V MC CAM, SH DSP, 16M FLASH L502 (5/10)

MS-130 BOARD

IC503 IC504 IC502 Q802 CN801 CN001 EVR VCC VCC MEMORYEEPROM CLOCK GENARATOR29(D/A CONV.) STICK(6/10) (6/10) (6/10) LENS BLOCK Q303 CN301 D 2.9V9ZRST VCC ZOOM 25 SENSOR A 2.9V A 2.9V 20 F RST VCC FOCUS

SENSOR

CAM P 5V L303 IC301 L302 LENS DRIVER (4/10) L202 Q302 IC201 L201 AUDIO AMP IC351 (8/10) IC101 FLASH VIDEO AMP CONTROL (3/10) Q351 (9/10) AU 2.9V IC601 CAMERA DSP, L601 128M SDRAM (2/10) XLENS RST LED PI001 198 3-7 3-8E,

COVER 4-2. SCHEMATIC DIAGRAMS 4-3. PRINTED WIRING BOARDS SECTION 4 PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS

4-1. FRAME SCHEMATIC DIAGRAMS12345678910 11 12 13 14 15 16 17

A 39P CN151

PRE_LAMP 39 CAM_P_5V 38 GND 37

ST-81 BOARD CN351 15P GND 36

1 XSTRB_PWR_SAVE NC 35 2 STB_ON1 NC 34 V2 33

B 3 STB_FULL

4 ST_UNREG NC 32 5 ST_UNREG NC 31 LENZ UNIT 6 ST_UNREG NC 30 7 ST_UNREG V4 29 8 ST_UNREG V5A 28 9 ST_UNREG V5B 27 OVF 10 REG_GND NC 26

FLASH 11 REG_GND V6 25 C 12 REG_GND V1 24 LENZ

13 REG_GND V3A 23 14 REG_GND V3B 22

C001 15 REG_GND GND 21

CCD_TEMP 20 VSUB 19 CD-432

CHARGING BOARD CCDCAPACITOR VSUB_CONT 18

GND 17

D GND 16

GND 15 CCD_OUT 14 GND 13 CN804 14P GND 12 14 XPWR_ON CAM_15V 11 13 NC CAM_-7.5V 10 12 PWR_LED_VCC GND 9 11 XPWR_LED

E NC 810 XSET_UP SY-83 BOARD H1 7

9 XMOVIE GND 6

CONTROL SWITCH 8 XPB_ON RG 5

7 NC

BLOCK GND 46 GND

H235NC NC24MODE_DIAL1 GND 1

F 3 D_2.9V 27P CN301

2 XSHTR_SW Z_RST_SENS2 27 1 XAE_LOCK_SW Z_RST_GND2 26 Z_RST_VCC2 25 FOCUS_A 24 CN001 10P FOCUS_B 23 10 VSS CN801 8P FOCUS_A 22 9 VCC 1 VSS FOCUS_B 21

G 8 SCLK 2 VCC F_RST_VCC 20

7 N.C 3 SCLK

MS F_RST_GND 196 INT MS-130 4 INT F_RST_SENS2 18SOCKET 5 N.C BOARD 5 DIO SHUTTER+ 17

4 DIO 6 NC SUTTEER+ 16 3 NC 7 BS SHUTTER- 15 2 BS 8 VSS SHUTTER- 14 1 VSS IRIS_M_+ 13

H IRIS_M_- 12

IRIS_S_+ 11 MIC901 CN803 2P IRIS_S_- 10 1 MIC_GND Z_RST_VCC 9

MIC

2 MIC_SIG Z_RST_SENS1 8 Z_RST_GND 7 TEMP_OUT 6 TEMP_GND 5

I ZOOM_A 4

ZOOM_B 3 ZOOM_A 2 ZOOM_B 1

J CN103 24P

1 TEST2 JK-244 BOARD 2 RGT3B4R5G6PSIG 7 HCK1

K 8 HCK2

9 CRext 10 SOUT

PANEL UNIT JK-243 BOARD11 REF

12 HST BT901 13 WIDE 14 CS BATTERY

LCD901 SP901 (USB)15 VSSGL J002 TERMINALCOLOR 16 VDDG J001

17 VSS SW-386 BOARD SPEAKER A/V OUT

LCD UNIT (MONO) DC IN18 VDD

19 DWN 20 EN 21 VCK 22 VST 23 COM

M 24 TEST1 BT001

CN101 6P

D901 LITHIUM1 BL_L BACK 2 N.C. BATTERY

3 BL_H

LIGHT 4 BL_THL

5 N.C. 6 BL_THH

N

4-1 4-2 FRAME CN802 39P 1 BL_L 2 BL_L 3 BL_H 4 BL_H 5 BL_THL 6 BL_THH 7 EVER_3.0V 8 KEY_AD0 9 XAE_LOCK_LED 10 KEY_AD1 11 XCHARGE_LED 12 HDO 13 XTALLY_LED 14 PANEL_2.9V 15 PANEL_2.9V 16 PANEL_V 17 CAM_SO 18 CAM_SI 19 KEY_AD3 20 XCS_PANEL_TG 21 XCAM_SCK 22 REG_GND 23 REG_GND 24 REG_GND 25 REG_GND 26 PANEL_B 27 PANEL_G 28 PANEL_R 29 REG_GND 30 REG_GND 31 REG_GND 32 REG_GND 33 PANEL_VG 34 BL_LEV 35 BL_ON 36 XRST_SYS 37 CAM_15V 38 CAM_15V 39 VL_3V CN805 39P 39 SP+ 38 SP- 37 BATT/XEXT 36 BATT_SIG 35 USB_JACK_IN 34 USB_DATA- 33 USB_DATA+ 32 AV_JACK_IN 31 V_OUT CN002 5P 30 AU_OUT 5 GND 29 USB_GND 4 ID 28 USB_GND 3 D+ 27 USB_GND 2 D- 26 AV_GND 1 VCC 25 AV_GND 24 ACV_UNREG1 23 ACV_UNREG1 22 ACV_UNREG1 21 ACV_UNREG1 20 ACV_UNREG1 19 ACV_UNREG1 18 ACV_UNREG1 17 ACV_UNREG1 16 GND 15 GND 14 GND 13 GND 12 GND 11 GND 10 GND 9 GND 8 BATT_UNREG1 7 BATT_UNREG1 6 BATT_UNREG1 5 BATT_UNREG1 4 BATT_UNREG1 3 BATT_UNREG1 2 BATT_UNREG1 1 BATT_UNREG1, COVER 4-2. SCHEMATIC DIAGRAMS 4-2. SCHEMATIC DIAGRAMS THIS NOTE IS COMMON FOR SCHEMATIC DIAGRAMS (In addition to this, the necessary note is printed in each block) (For schematic diagrams) 1. Connection • All capacitors are in µF unless otherwise noted. pF : µ

LµiFn. 5k0 V or less are not indicated except for electrolytics Pattern box

and tantalums. • Chip resistors are 1/10 W unless otherwise noted. kΩ=1000 Ω, MΩ=1000 kΩ. • Caution when replacing chip parts. New parts must be attached after removal of chip. Be careful not to heat the minus side of tantalum capacitor, Because it is damaged by the heat. L • Some chip part will be indicated as follows. Example C541 L452 22U 10UH TA A 2520 Front of the lens Kinds of capacitor Case Size L = About 25 cm External dimensions (mm) • Constants of resistors, capacitors, ICs and etc with XX indicate that they are not used. 2. Adjust the distance so that the output waveform of In such cases, the unused circuits may be indicated. Fig. a and the Fig. b can be obtain. • Parts with ★ differ according to the model/destination. H Refer to the mount table for each function. • All variable and adjustable resistors have characteristic curve B, unless otherwise noted. • Signal name XEDIT → EDIT PB/XREC → PB/REC • 2: non flammable resistor • 5: fusible resistor • C: panel designationBB• A: B+ Line A A=B/2 A • B: B– Line Fig. a (Video output terminal output waveform) • J : IN/OUT direction of (+,–) B LINE. • C: adjustment for repair. Electronic beam • A: VIDEO SIGNAL (ANALOG) scanning frame • A: AUDIO SIGNAL (ANALOG) • A: VIDEO/AUDIO SIGNAL CRT picture frame • A: VIDEO/AUDIO/SERVO SIGNAL • A: SERVO SIGNAL • Circled numbers refer to waveforms. (Measuring conditions voltage and waveform) • Voltages and waveforms are measured between the Fig.b (Picture on monitor TV) measurement points and ground when camera shoots color bar chart of pattern box. They are reference values When indicating parts by reference number, please and reference waveforms. include the board name. (VOM of DC 10 MΩ input impedance is used) • Voltage values change depending upon input impedance of VOM used.) Note : The components identified by mark 0 or Note : Les composants identifiés par une marque dotted line with mark 0 are critical for safety. 0 sont critiques pour la sécurité. Replace only with part number specified. Ne les remplacer que par une pièce portant le numéro spécifie. 4-5 Yellow Cyan Green White Magenta Red Blue,

COVER

4-2. SCHEMATIC DIAGRAMS Link CD-432 BOARD (CCD IMAGER) ST-81 BOARD (FLASH DRIVE) SW-386 BOARD (1/2) (CONTROL SWITCH) MS-130 BOARD(MEMORY STICK CONNECTOR) SW-386 BOARD (2/2) (LCD DRIVE, TIMING GENERATOR) CONTROL SWITCH BLOCK COMMON NOTE FOR SCHEMATIC DIAGRAMS WAVEFORMS, COVER 4-2. SCHEMATIC DIAGRAMS CD-432 PRINTED WIRING BOARD For Schematic Diagram • Refer to page 4-41 for printed wiring board. 12345678

CD-432 BOARD Note:Voltage and waveform of mounted on CD-432 board A can not be measured because they are (mounted)CCD IMAGER(CCD BLOCK) by the side of the lens. XX MARK:NO MOUNT

D001 OPR5052 LND101 39 PRE_LAMP SELF TIMER/ LND102 38 CAM_P_5V AF ILLUMINATOR

B LND103 37 GND

LND104 36 GND LND105 35 NC LND106 34 NC LND107 33 V2 LND108 32 NC LND109 31 NC LND110 30 NC

C LND111 29 V4

LND112 28 V5A LND113 27 V5B LND114 26 NC LND115 25 V6 C002 R006 R005 2200p 1M 0 LND116 24 V1987654321LND117 23 V3A R004 LND118 22 V3B 1/10W

D SY-83 LND119 21 CCD_GND C003

(1/10) LND120 20 CCD_TEMP 0.1u16V IC001 CN151 TH001 Q001 (PAGE 4-9) LND121 19 VSUB (CCD TEMP SENSOR) UN9213J-(K8).SO CCD IMAGER LND122 18 VSUB_CONT SWITCH IC001ICX432FQF-13 LND123 17 GND LND124 16 GND C008 R008 C007 LND125 15 GND R0090 XX 3300 10p 10 11 12 13 14 15 16 17 18 LND126 14 CCD_OUT

E LND127 13 GND Q0022SC4250(T5LSONY1)

LND128 12 GND BUFFER LND129 11 CAM_15V LND130 10 CAM_-7.5V FB001 LND131 9 GND C005 LND132 8 NC XX C006 C004 C001 0.1u 0.1u 0.1u LND133 7 H1 16V 16V 16V LND134 6 GND

F R007 0 C009LND135 5 RG

R003 0 10u 16V LND136 4 GND R002 0 LND137 Precautions for Replacement of CCD Imager3 H2 • The CD-432 board mounted as a repair part is not equipped LND138 2 NC SIGNAL PATH with a CCD imager. LND139 1 GND When replacing this board, remove the CCD imager from the

VIDEO old one and mount it onto the new one. SIGNAL • If the CCD imager has been replaced, carry out all the G Y/CHROMA adjustments for the camera section.• As the CCD imager may be damaged by static electricity from REC its structure, handle it carefully like for the MOS IC.

In addition, ensure that the receiver is not covered with dusts 05 nor exposed to strong light. 4-7 4-8 CD-432 VOUT GND VDD V1 RG V2 GND V3A SUB V3B CSUB V4 VL V5A H1 V5B H2 V6, Schematic diagram of the SY-83 board are not shown. Pages from 4-9 to 4-28 are not shown.,

COVER 4-2. SCHEMATIC DIAGRAMS SW-386 PRINTED WIRING BOARD For Schematic Diagram

• Refer to page 4-47 for printed wiring board. 12345678910 11

SW-386 BOARD (1/2) A CONTROL SWITCH(KEY BLOCK) XX MARK:NO MOUNT NO MARK:REC/PB MODE S004~S008 CONTROL

CL001 BL_L BL_L CL002 B1 A1 B1 A1

B BL_L 2

S00412S007 1BL_L CL003 BL_H BL_H CL004 BL_H BL_H43B1 A142S006 CL005 R010 B2 A2 B2 A2BL_THL BL_THL 1200 CL006 (STROBE) (MACRO)BL_THH BL_THH CL00743EVER_3.0V B2 A2 CL008 KEY_AD0 (SET) CL009 D006 A1 B1 B1 A1S005 S008 1 XAE_LOCK_LED CL-196HR-CD-T122CL010 (TALLY(RED)) KEY_AD1

C CL011 R007XCHARGE_LED3443

CL012 HDO D007 2k A2 B2 B2 A2 HDO CL-196YG-CD-T CL013 (AE/AF_LOCK(GREEN)) (REVIEW) (SELFTIMER) XTALLY_LED CL014 R008 PANEL_2.9V 330 CL015 R012 1200 PANEL_2.9V CL016 PANEL_V D008 R006 PANEL_V SML-310YTT86 240 CL017 CAM_SO CAM_SO FLASH/CHG CL018 (ORANGE)CAM_SI

D CAM_SI CL019 R015 A1

KEY_AD3 3300 B1 CL020 2 1XCS_PANEL_TG S010 XCS_PANEL_TG W CL021 TXCAM_SCK

SY-83 XCAM_SCK CL022 4 3

(6/10) REG_GND B2 A2 CN802 CL023 R009 R011B1 B1 A1 A1 B1 R013 (PAGE 4-20) REG_GND B1 A1 1200 A1 IMAGE SIZE/2 1500 2 S00311S009 2 CL024 2 S00111S002 DELETE REG_GND CL025 REG_GND CL026 PANEL_B12121243344334PANEL_B B2 A2 A2 B2 B2 A2 A2 B2

E CL027 PANEL_G D001 D002 D003PANEL_G MENU DISPLAY/XX XX XX

CL028 PANEL_R LCD ON/OFF PANEL_R 3 CL02933LND001 REG_GND CL030 STATIC_GND REG_GND R005 CL031 W ZOOM TXX REG_GND CL032 REG_GND CL033 PANEL_VG PANEL_VG PANEL_2.9V CL034 BL_LEV

F BL_LEV CL035 BL_ON

BL_ON CL036 XRST_SYS XRST_SYS CL037 R016 CAM_15V CL038 CAM_15V XRST_SYS XRST_SYS C001 R017 CL039 BL_ON 0.1u 220k VL_3V BL_ON BL_LEV BL_LEV 5.7

G PANEL_VG CONTROL V_INPANEL_VG 15.1BT001 GND NC 2

LITHIUM PANEL_B BATTERY PANEL_B NC NC (2/2)PANEL_G 1.3 13.6 PANEL_G NOISE BYPASS V_OUT PANEL_13.5V PANEL_R PANEL_R XCAM_SCK XCAM_SCK C003

SIGNAL PATH CAM_SI IC001CAM_SI 1 0.1u

CAM_SO 13.5V REG CAM_SO IC001

VIDEO SIGNAL PANEL_V (2/2) NJM2370RD5(TE2)PANEL_V

XCS_PANEL_TG XCS_PANEL_TG

CHROMA HDO REG_GNDHDO H BL_THHREC BL_THH

BL_THL BL_THL BL_H

PB BL_H

BL_L BL_L

The components identified by mark 0 or dotted Les composants identifiés par une marque 0 sont

line with mark 0 are critical for safety. critiques pour la sécurité. Ne les remplacer que

Replace only with part number specified. par une piéce portant le numéro spécifié. SW-386 (1/2) 4-29 4-30

43215678R014 1500,

COVER 4-2. SCHEMATIC DIAGRAMS SW-386 PRINTED WIRING BOARD For Schematic Diagram

• Refer to page 4-47 for printed wiring board. • Refer to page 4-56 for waveforms. 12345678910 11 12 13 14

SW-386 BOARD (2/2) A LCD DRIVE,TIMING GENERATOR(PD BLOCK) XX MARK:NO MOUNT NO MARK:REC/PB MODE Q103MCH3310-TL-E

B+ SWITCH 13.6 13.6 PANEL_13.5V R126 R122 0 220k 2 PANEL_2.9V L102 10uH POFFB R121 0.3 C1150.01u (1/2) 4700 C102 C106 C107 C108 16V C109 C110 C113 47u 0.1u XX 0.1u 0.1u 4.7u 4.7u 6.3V 10V 6.3V 10V 16V 16V 10V REG_GND

VP C 7

36 35 34 33 32 31 30 29 28 27 26 25 PANEL UNIT CN103 24P 24 TEST1 23 COM

VST

6 22 VSTVCK 2.9 21 VCK VDD 1 NC EN 20 EN 1.8 6.6 DWN PANEL_B BIN COM 19 DWN

D C103 0.01u 1.8 13.6 18 VDD

PANEL_G GIN 2 VCC2 D101 C104 0.01u 7 1.8 7.1 R115 10 VB MA8036-TX 17 VSS PANEL_R RIN VB C116 16 VDDG C105 0.01u381u 7.1 R116 10 VG 10V 15 VSSG SCAN LCD901VG 14 CS COLOR XVD 2.9 10 LCD

XVD

4 IC101 7.1 R117 VR WIDE VR 13 WIDE MONITOR

HST

XHD 2.7 HD LCD DRIVE, 9 12 HST TIMING GENERATOR GND2 REF IC101 11 REF

E SO 2.9 R124 C117CAM_SI VCC1 5 CXA3622R-T4 GND1 C114 150k 0.1u 10 SOUT

0.1u 16V XCS XCS 2.9 0 POFF 9 CRext XCS_PANEL_TG XCS POFF HCK2 XSCK XSCK R10308HCK2 2.9 0.2 WIDE HCK1 XCAM_SCK XSCK WIDE 7 HCK1 JL001 SI SI 0.5 0 HST 6 PSIG CAM_SO SI HST VG SO 2.7 2.9 VR5GJL002 SO VDD4RXVD VB

F PANEL_V 3 BRGT

XHD 2 RGT HDO R128 XX 1 TEST2 1 XRSTXRST_SYS R123 47k 13.6 (1/2) 12345678910 11 12 7.6 Q102 UP04601008S046R104 1k VP PSIG DRIVE

XRST

7 5

G 3 1R110 R112 7

XX 10k 0.5% C118 1/16W 2200p C112560p R120 R113 47k 100k 6.5 R111 C111 0.5% 68k 0.1u 1/16W1325PANEL_VG 7

H BL_ONBL_ON Q101

BL_LEV UP04601008S0647BL_LEV PSIG DRIVE 13.6 D901 CN101 6P BACK LIGHT BL_THH 6 BL_THH 5 N.C. BL_THL 4 BL_THL BL_H 3 BL_H

I 2 N.C.BL_L 1 BL_L SIGNAL PATH VIDEO SIGNAL CHROMA J REC PB The components identified by mark 0 or dotted Les composants identifiés par une marque 0 sont

line with mark 0 are critical for safety. critiques pour la sécurité. Ne les remplacer que

Replace only with part number specified. par une piéce portant le numéro spécifié.

4-31 4-32 SW-386 (2/2) 48 47 46 45 44 43 42 41 40 39 38 37 XWRT/CLKIN VSS RGT 2.9 0 VST RGT VST HCK1 1.5 1.5 VCK HCK1 VCK R106 0 HCK2 1.5 2.6 EN HCK2 EN R108 0 2.9 DWN HDO DWN REF 1.5 2.9 BL_ON REF PWM 1.3 2.9 OP_OUT BLDET R125 0 1.5 2.5 OP_IN FBACK 2.4 2.5 BL_LEV XCLR EXTDA 1.3 0.7 R127 XX Filter2 XLED 1.2 13.6 Filter VCC3 VSS VP 13 14 15 16 17 18 19 20 21 22 23 24,

COVER 4-2. SCHEMATIC DIAGRAMS ST-81 PRINTED WIRING BOARD

For Schematic Diagram • Refer to page 4-49 for printed wiring board. 12345678

ST-81 BOARD T001 D001HAU160C030TP A 1 5FLASH DRIVE(ST BLOCK) P S

XE_A(H)

XX MARK:NO MOUNT24LND019 R011 NO MARK:REC/PB MODE R005 1M5600 F

1/10W R006 3 L001R012 LND021 33 1800 0 1/10W FLASHUNIT TRIGGER

B C006 R0103300p 560 C004

0 0 0.22u1/10W C005Q002 47000pF CPH3209-SONY-TL-E 250V TRANS DRIVE LND020 0 Q003 MCH3405-TL-E XE_K(L) R007 257 100k D002 R008 MA111-(K8).S0 10k C0015678135uF 315V

CHARGING C LND001 15 REG_GND CAPACITOR

LND002 14 REG_GND Q004 GT8G132(TE12L) 4321LND003 13 REG_GND R001 FLASH DRIVE47 0 LND004 12 REG_GND R002 LND005 11 REG_GND 1M LND006 10 REG_GND LND007 9 ST_UNREG

SY-83 D (9/10)

LND008 8 ST_UNREG CN351 LND009 7 ST_UNREG (PAGE 4-26) LND010 6 ST_UNREG LND011 5 ST_UNREG LND012 4 ST_UNREG LND013 3 STB_FULL LND014 2 STB_ON1 LND015 1 XSTRB_PWR_SAVE

E

The components identified by mark 0 or dotted Les composants identifiés par une marque 0 sont line with mark 0 are critical for safety. critiques pour la sécurité. Ne les remplacer que Replace only with part number specified. par une piéce portant le numéro spécifié.

ST-81 4-33 4-34

, Schematic diagrams of the JK-243 and JK-244 board are not shown. Pages from 4-35 to 4-36 are not shown.,

COVER 4-2. SCHEMATIC DIAGRAMS MS-130 PRINTED WIRING BOARD For Schematic Diagram

• Refer to page 4-53 for printed wiring board. 123456712345

MS-130 BOARD CONTROL SWITCH BLOCK A MEMORY STICK CONNECTOR(MS BLOCK) A CONTROL SWITCH BLOCK is replaced as a block,

CN001 so that PRINTED WIRING BOARD is omitted. LND001 1 VSS 10 VSS LND002 2 VCC 9 VCC 14 13 S005 8 SCLK MODE DIAL LND003 3 SCLK 1

MEMORY STICK

7 N.C. SY-83 LND004 4 INT 6 INT SET_UP

B (6/10) MEMORY STICK B B

CN801 5 N.C. R002 LND005 (PAGE 4-19) 5 DIO SCN 4.7k 4 DIOG3R003 LND006 106 NC 3 NC MOVIE P_AUTO 10k622BS 12 11 R004 LND007 7 BS PLAY AUTO 22k 1 VSSA1LND008 8 VSS (6 POSITION MODE_DIAL) (1st)

C LND009 C S003STATIC_GND S004(SHUTTER) (2nd) POWER

R001 SIGNAL PATH 20k D001 VIDEO SIGNAL AUDIO (POWER(GREEN)) Y/CHROMA SIGNAL

D REC D PB E SY-83 (7/10)

CN804 (SEE PAGE 4-21)

MS-130/CONTROL SWITCH BLOCK 4-37 4-38

14P XAE_LOCK_SW 1 XSHTR_SW 2 D_2.9V 3 MODE_DIAL1 4 NC 5 GND 6 NC 7 XPB_ON 8 XMOVIE 9 XSET_UP 10 XPWR_LED 11 PWR_LED_VCC 12 NC 13 XPWR_ON 14, COVER 4-3. PRINTED WIRING BOARDS 4-3. PRINTED WIRING BOARDS THIS NOTE IS COMMON FOR PRINTED WIRING BOARDS • : Uses unleaded solder. • Chip parts. • : Circuit board Transistor Diode : Flexible boardC6544565445333123Pattern from the side which enables seeing. : pattern of the rear sideBE123321123321212121654(The other layers’ patterns are not indicated) • Through hole is omitted. 12213412344334• Circled numbers refer to waveforms. • There are a few cases that the part printed on diagram5433452143211221isn’t mounted in this model. • C: panel designation Pattern Board Name Parts Location Waveforms Total Number of Layers Layers Not Indicated CD-432 4-57 – 2 layers – SW-386 4-60 4-56 2 layers – ST-81 4-60 – 2 layers – MS-130 – – 1 layers – 4-39,

COVER

4-3. PRINTED WIRING BOARDS Link CD-432 BOARD ST-81 BOARD SW-386 BOARD MS-130 BOARD COMMON NOTE FOR PRINTED WIRING BOARDS WAVEFORMS MOUNTED PARTS LOCATION CIRCUIT BOARDS LOCATION,

COVER 4-2. SCHEMATIC DIAGRAMS 4-3. PRINTED WIRING BOARDS MOUNTED PARTS LOCATION CD-432 (CCD IMAGER) Note for Printed Wiring Board (See page 4-39). CD-432 BOARD (SIDE A) CD-432 BOARD (SIDE B) A

D001

K A A

SELF TIMER/ AF ILLUMINATOR

B B

LND101

C LND103

LND102 LND105 LND104 LND107 LND106 C LND109 LND108 LND111 LND110 LND113 LND112LND114 C LND115LND117 LND116 R004 LND118 Q001 LND119LND121 LND120 LND123 LND122BELND125 LND12491LND127 LND126 LND129 LND128 LND131 LND130 LND133 LND132 LND135 LND134 LND137 LND136 IC001 LND138LND139EB10 18

D Q002 D

C C001 C005 C006

BB

R007 C004 C009 R003 R002 1-687-580- 11 1-687-580- 1105 0512345543214-41 4-42 CD-432 R009 C008 R006 R008 C002 C007 R005 C003 FB001 TH001 +, Printed wiring board of the SY-83 board are not shown. Pages from 4-43 to 4-46 are not shown.,

COVER 4-2. SCHEMATIC DIAGRAMS 4-3. PRINTED WIRING BOARDS MOUNTED PARTS LOCATION SW-386 (LCD DRIVE, TIMING GENERATOR, CONTROL SWITCH)

Note for Printed Wiring Board (See page 4-39).

SW-386 BOARD K

A D006 (TALLY (RED)) S001 S002 D007 R007D007 W ZOOM T (AE/AF LOCK (GREEN)) AKKD003 C110

A D008 KR008 KFLASH/CHG D008AAKK85S001 R009(ORANGE) S002A K

A K IC001SGR006 D00114DQ103 R017 C00379C109 R123 C111 R117 DISPLAY/ 8 R116 R115 LCD ON/OFF R111 S004 3 IC101S009 C114S007 4 (MACRO) 1

B R013 R012JL002 JL001 R014 (STROBE)

C108 R106 R108 S005 S006 S00725(SET) C107 R125 + P

BB

(REVIEW) + C102 S008 L102

C BT001

S003 (SELF TIMER) S010 BATTERY, R015 S004 – S008 R128 LITHIUM SECONDARY MENU CONTROL IMAGE SIZE/

DELETE

LND001

D

1-687-575- 11

E

051234

SW-386 4-47 4-48

24161CN103 CN101 D101 C117 C116 R124 D006 CL002 CL001 CL004 CL003 R011 D002 CL006 CL005CL007 R016CL008 CL009 CL010 C001 R010 CL012 CL011 CL014 CL013 CL016 CL015 CL018 CL017 CL020 CL019 CL022 CL021 CL024 CL023 R121 CL026 CL025 C115 CL028 CL027 C113 CL030 CL029 Q102 CL032 CL031 CL034 CL033 R122 CL036 CL035 Q101 CL038 CL037CL039 R126 R120 R127 C103 C104 37 36 C105 C106 R103 1 1312 R112 R110 R113 C118 C112 R104 BT001 R005,

Ver 1.1 2003. 06 DSC-P8

COVER 4-2. SCHEMATIC DIAGRAMS 4-3. PRINTED WIRING BOARDS MOUNTED PARTS LOCATION

ST-81 (FLASH DRIVE)

Note for Printed Wiring Board (See page 4-39).

ST-81 BOARD (SIDE A)

FLASH UNIT

ST-81 BOARD (SIDE B)

LND019 LND021 LND020 B LND014 LND015 C R007 R008 LND012 LND013

A LND010 LND011 AE D LND008 LND0095 4 D002SGR001 LND006 LND007

L001 LND004 LND005 Q003 1-687-576- 11 LND002 LND003 Q004 LND00181C006142T001

B B3 5 A K A C C

C001 1-687-576- 123455432105 4-49 4-50 ST-81 D001 R011 C005 R012 Q002 R005 R006 R010 C004 R002, Printed wiring board of the JK-243 and JK-244 board are not shown. Pages from 4-51 to 4-52 are not shown., COVER 4-2. SCHEMATIC DIAGRAMS 4-3. PRINTED WIRING BOARDS MS-130 (MEMORY STICK CONNECTOR) Note for Printed Wiring Board (See page 4-39).

MS-130 BOARD

13 14 CN001 11 12 1-687-577- 11 4-53 4-54 MS-130 LND001 LND002 LND003 LND004 LND005 LND007 LND008 LND009, Waveforms of the SY-83 board are not shown. Page 4-55 is not shown., COVER SW-386 BOARD 4-4. WAVEFORMS SW-386 BOARD16360 mVp-p 5.0 Vp-p H 2H IC101 ek REC/PB IC101 wg REC/PB27360 mVp-p 8.2 Vp-p H 2H IC101 el REC/PB IC101 wa REC/PB38430 mVp-p 8.2 Vp-p H 2H IC101 r; REC/PB IC101 w; REC/PB493.0 Vp-p 8.2 Vp-p V 2H IC101 rs REC/PB IC101 ql REC/PB 3.0 Vp-p

H

IC101 rd REC/PB SW-386 4-56, COVER 4-3. PRINTED WIRING BOARDS 4-5. MOUNTED PARTS LOCATION no mark : side A * mark : side B CD-432 BOARD C001 D-5 C002 D-4 C003 C-4 C004 D-4 C006 D-4 C007 D-4 C009 D-5 * D001 A-3 IC001 D-5 FB001 D-5 Q001 C-3 Q002 D-4 R002 D-4 R003 D-4 R004 C-4 R005 D-4 R006 D-4 R007 D-4 R008 D-4 R009 D-3 TH001 D-5 4-57 CD-432, Mounted parts location of the SY-83 board are not shown. Page 4-58, 59 is not shown.,

COVER 4-3. PRINTED WIRING BOARDS

no mark : side A * mark : side B

SW-386 BOARD ST-81 BOARD

BT001 C-4 * C001 C-1 C004 A-4 C001 B-2 C005 B-1 C003 D-3 C006 A-3 C102 C-3 C103 B-3 D001 B-1 C104 B-3 D002 A-4 C105 B-3 C106 B-3 L001 A-2 C108 B-3 C109 B-3 Q002 A-3 C110 A-2 Q003 A-4 C111 B-4 Q004 A-3 C112 B-4 C113 A-2 R001 A-4 C114 B-4 R002 A-4 C115 B-3 R005 A-3 C116 C-1 R006 A-4 C117 C-1 R007 A-4 C118 B-4 R008 A-4 R010 A-4 CN101 C-1 R011 B-1 CN103 B-1 R012 A-3 D006 A-2 T001 B-1 D007 A-2 D008 A-2 D101 C-1 IC001 A-2 IC101 B-3 L102 C-3 Q101 B-3 Q102 B-3 Q103 A-3 R006 A-2 R007 A-2 R008 A-2 R009 A-4 R010 A-2 R011 B-2 R012 B-2 R013 B-2 R014 B-2 R015 C-3 R016 A-2 R017 A-2 R103 B-3 R104 B-4 R106 B-2 R108 B-2 R111 B-4 R112 B-4 R113 B-4 R115 B-1 R116 B-1 R117 B-1 R120 B-3 R121 B-3 R122 A-3 R123 B-3 R124 C-2 R125 C-3 R126 C-3 S001 A-3 S002 A-4 S003 C-2 S004 B-2 S005 B-2 S006 B-2 S007 B-3 S008 C-2 S009 B-1 S010 C-3

SW-386/ST-81 4-60

, Mounted parts location of the JK-243 board are not shown. Page 4-61 is not shown., COVER NOTE 5. REPAIR PARTS LIST NOTE: Characters A to C of the electrical parts list indicate location of exploded views in which the desired part is shown.

Link EXPLODED VIEWS

ABCCABINET SECTION LENS SECTION BATTERY HOLDER SECTION

Link ELECTRICAL PARTS LIST ACCESSORIES

CD-432 BOARD B ST-81 BOARD C MS-130 BOARD C SW-386 BOARD C, COVER 5. REPAIR PARTS LIST

SECTION 5 REPAIR PARTS LIST

NOTE: • -XX, -X mean standardized parts, so they may have some differences from When indicating parts by reference number, the original one. please include the board name. • Items marked “*” are not stocked since they are seldom required for routine service. Some delay should be anticipated when ordering these items. The components identified by mark 0 or • The mechanical parts with no reference number in the exploded views are not dotted line with mark 0 are critical for safety. supplied. Replace only with part number specified. • Due to standardization, replacements in the parts list may be different from Les composants identifiés par une marque the parts specified in the diagrams or the components used on the set. 0 sont critiques pour la sécurité. • CAPACITORS: Ne les remplacer que par une pièce portant le numéro spécifié. uF: µF • COILS uH: µH • RESISTORS All resistors are in ohms. METAL: metal-film resistor METAL OXIDE: Metal Oxide-film resistor F: nonflammable • SEMICONDUCTORS In each case, u: µ, for example: uA...: µA... , uPA... , µPA... , uPB... , µPB... , uPC... , µPC... , uPD..., µPD... • Abbreviation AUS : Australian model CH : Chinese model CND : Canadian model J : Japanese model JE : Tourist model HK : Hong Kong model KR : Korean model 5-1, COVER 5. REPAIR PARTS LIST 5-1. EXPLODED VIEWS 5-1-1. CABINET SECTION ns: not supplied 2 10 11 ns MIC901 Ref. No. Part No. Description Ref. No. Part No. Description 1 X-3953-259-1 CABINET FRONT ASSY (BLUE) 7 3-081-764-01 FOOT, RUBBER 1 X-3953-262-1 CABINET FRONT ASSY (RED) 8 X-3953-260-1 CABINET (REAR) ASSY (BLUE) 1 X-3953-266-1 CABINET FRONT ASSY (SILVER) 8 X-3953-263-1 CABINET (REAR) ASSY (RED) 1 X-3953-438-1 CABINET FRONT ASSY (WHITE) 8 X-3953-267-1 CABINET (REAR) ASSY (SILVER) 2 3-989-735-11 SCREW (M1.7), LOCK ACE, P2 8 X-3953-439-1 CABINET (REAR) ASSY (WHITE) 3 1-477-770-11 SWITCH BLOCK, CONTROL (SILVER) 9 3-081-742-01 COVER, JACK (SILVER) 3 1-477-770-21 SWITCH BLOCK, CONTROL (BLUE) 9 3-081-742-11 COVER, JACK (BLUE) 3 1-477-770-31 SWITCH BLOCK, CONTROL (RED) 9 3-081-742-21 COVER, JACK (RED) 3 1-477-770-41 SWITCH BLOCK, CONTROL (WHITE) 9 3-081-742-51 COVER, JACK (WHITE) 4 3-081-763-01 CUSHION, MICROPHONE 10 3-081-761-01 SHEET, ADHESIVE, LCD WINDOW 5 3-081-747-01 CASE, MICROPHONE 11 3-081-770-01 WINDOW, LCD 6 X-3953-264-1 CABINET (LOWER) ASSY (RED) MIC901 1-542-519-11 MICROPHONE 6 X-3953-268-1 CABINET (LOWER) ASSY (BLUE, SILVER, WHITE) 5-2, COVER 5. REPAIR PARTS LIST 5-1-2. LENS SECTION ns: not supplied LCD901 ns 66 60 62 61D901 CD-432 65 59 ns ns 51 IC001(Note 1) (Note 2) 54 (Note 2) (Note 1) Be sure to read “Precuations for Replacement of CCD Imager” on page 4-8 when changing the CCD imager. (Note 2) Be sure to read “Barrier Unit” and “Barrier Operation Test Method” on page 2-10 when changing the barrier unit or the ornamental fixed plate (A). The components identified by Les composants identifiés par une mark 0 or dotted line with marque 0 sont critiques pour la mark 0 are critical for safety. sécurité. Replace only with part num- Ne les remplacer que par une pièce ber specified. portant le numéro spécifié. Ref. No. Part No. Description Ref. No. Part No. Description 51 1-758-914-11 LENS, VIDEO (ED02C) 61 3-078-890-21 SCREW, TAPPING 52 3-709-683-01 PLATE (A), ORNAMENTAL FIXED (Note 2) 62 3-081-745-01 LENS FRAME 53 3-709-676-01 MATERIAL, FIXED PLATE ADHESION 63 3-080-204-11 SCREW, TAPPING, P2 54 3-709-678-01 TITE (B TITE M1.4X4.5), TAP 64 3-081-427-01 SPECIAL 55 3-709-677-01 BARRIER UNIT (Note 2) 65 3-081-766-01 SHEET, INSULATING, SY 56 1-758-916-11 FILTER BLOCK, OPTICAL 66 CAUTION TAPE (K) 57 3-076-569-01 PLATE, LIGHT INTERCEPTION 0D901 1-477-429-11 BLOCK, LIGHT GUIDE PLATE 58 3-075-085-01 RUBBER (DQ), SEAL IC001 A-7016-091-A CCD BLOCK ASSY (CCD IMAGER) (Note 1) 59 3-081-681-01 HOLDER, AF LCD901 8-753-052-52 ACX309AKC-1 (SERVICE) 60 A-7078-619-A CD-432 BOARD, COMPLETE CAUTION : For the part of 66 : TAPE (K) (3-075-828-01), cut WOVEN (T0.25), FABRIC NON (3-076-631-01) into the desired length and use it. 5-3, COVER 5. REPAIR PARTS LIST 5-1-3. BATTERY HOLDER SECTION ns: not supplied ST 102-81 ns 111 !

SW

107 108 -386 ns 109 ns MS-13 BT9010 102 102 SY- J8 K3 -244 103 105 (Note) 101 106 ! : BT001 (BATTERY, LITHIUM SECONDARY) Board on the mount position. (See page 4-48.) (Note) Including the parts mounted on JK-243 board. Ref. No. Part No. Description Ref. No. Part No. Description 101 A-7078-689-A SY-83 BOARD, COMPLETE (SERVICE) 108 3-081-637-01 LID, BT (SILVER) 102 3-080-204-11 SCREW, TAPPING, P2 108 3-081-637-11 LID, BT (BLUE) 103 3-081-765-01 SHEET, SY RETAINER 108 3-081-637-21 LID, BT (RED) 104 A-7078-620-A MS-130 BOARD, COMPLETE 108 3-081-637-51 LID, BT (WHITE) 105 A-7078-616-A JK-244 BOARD, COMPLETE (Note) 109 3-318-382-01 SCREW (1.7X3), TAPPING 106 3-989-735-11 SCREW (M1.7), LOCK ACE, P2 110 A-7078-618-A ST-81 BOARD, COMPLETE 107 X-3953-258-1 HOLDER ASSY, BATTERY (BLUE) 111 3-081-748-01 SHEET (LI), INSLATING 107 X-3953-261-1 HOLDER ASSY, BATTERY (RED) 112 A-7078-615-A SW-386 BOARD, COMPLETE 107 X-3953-265-1 HOLDER ASSY, BATTERY (SILVER) BT901 1-694-854-11 BATTERY TERMINAL BOARD 107 X-3953-437-1 HOLDER ASSY, BATTERY (WHITE) 5-4,

CD-432

5-2. ELECTRICAL PARTS LIST Ref. No. Part No. Description Ref. No. Part No. Description A-7078-619-A CD-432 BOARD, COMPLETE *********************** (IC001 is not included in this board) < CAPACITOR > C001 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V C002 1-162-966-11 CERAMIC CHIP 0.0022uF 10% 50V C003 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V C004 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V C006 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V C007 1-162-915-11 CERAMIC CHIP 10PF 0.5PF 50V C009 1-135-957-91 TANTAL. CHIP 10uF 20% 16V < DIODE > D001 6-500-398-01 DIODE OPR5052 (SELF TIMER/AF ILLUMINATOR) < FERRITE BEAD > FB001 1-216-864-11 METAL CHIP 0 5% 1/16W < IC > IC001 A-7016-091-A CCD BLOCK ASSY (CCD IMAGER) (Note) < TRANSISTOR > Q001 8-729-037-74 TRANSISTOR UN9213J- (TK).SO Q002 8-729-050-22 TRANSISTOR 2SC4250 (T5LSONY1) < RESISTOR > R002 1-216-864-11 METAL CHIP 0 5% 1/10W R003 1-216-864-11 METAL CHIP 0 5% 1/10W R004 1-216-828-11 METAL CHIP 3.9K 5% 1/10W R005 1-216-864-11 METAL CHIP 0 5% 1/10W R006 1-216-857-11 METAL CHIP 1M 5% 1/10W R007 1-216-864-11 METAL CHIP 0 5% 1/10W R008 1-216-827-11 METAL CHIP 3.3K 5% 1/10W R009 1-216-864-11 METAL CHIP 0 5% 1/10W < THERMISTOR > TH001 1-810-816-11 THERMISTOR, NTC (1608)

Electrical parts list of the JK-244 board is

not shown.

Page 5-6 is not shown.

(Note) Be sure to read “Precautions for Replacement of CCD Imager” on page 4-8 when changing the CCD imager. 5-5,

MS-130 ST-81 SW-386

Ref. No. Part No. Description Ref. No. Part No. Description A-7078-620-A MS-130 BOARD, COMPLETE C105 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16V *********************** C106 1-125-777-11 CERAMIC CHIP 0.1uF 10% 10V C108 1-125-777-11 CERAMIC CHIP 0.1uF 10% 10V < CONNECTOR > C109 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V C110 1-127-820-11 CERAMIC CHIP 4.7uF 16V CN001 1-815-572-61 CONNECTOR, MEMORY STICK C111 1-125-777-11 CERAMIC CHIP 0.1uF 10% 10V C112 1-164-739-11 CERAMIC CHIP 560PF 5% 50V C113 1-115-566-11 CERAMIC CHIP 4.7uF 10% 10V A-7078-618-A ST-81 BOARD, COMPLETE C114 1-125-777-11 CERAMIC CHIP 0.1uF 10% 10V ********************** C115 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16V 1-477-769-11 STROBO LUMINESCENCE UNIT C116 1-165-908-91 CERAMIC CHIP 1uF 10% 10V C117 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V < CAPACITOR > C118 1-164-939-11 CERAMIC CHIP 0.0022uF 10% 50V 0C001 1-100-528-11 ELECT 135uF 315V < CONNECTOR > C004 1-127-715-91 CERAMIC CHIP 0.22uF 10% 16V C005 1-137-723-21 CERAMIC CHIP 0.047uF 10% 250V CN101 1-794-766-21 CONNECTOR, FFC/FPC (LIF) 6P C006 1-162-967-11 CERAMIC CHIP 0.0033uF 10% 50V CN103 1-794-770-11 CONNECTOR, FFC/FPC (LIF) 24P < DIODE > < DIODE > 0D001 6-500-237-01 DIODE HAU160C030TP D006 8-719-077-09 DIODE CL-196HR-CD-T (TALLY (RED)) 0D002 8-719-073-01 DIODE MA111- (K8).S0 D007 8-719-063-83 DIODE SML-510MWT86 (AE/AF LOCK (GREEN)) < COIL > D008 8-719-077-34 DIODE SML-310YTT86 (FLASH/CHG (ORANGE)) 0L001 1-456-193-11 COIL, TRIGGER D101 8-719-017-82 DIODE MA8036 < TRANSISTOR > < IC > 0Q002 6-550-183-01 TRANSISTOR CPH3209-SONY-TL-E IC001 6-700-712-01 IC NJM2370RD5 (TE2) 0Q003 8-729-056-01 TRANSISTOR MCH3405-TL-E IC101 8-752-109-23 IC CXA3622R-T4 0Q004 8-729-053-74 TRANSISTOR CY25AAJ-8-T13 < COIL > < RESISTOR > L102 1-469-757-21 INDUCTOR 10uH R001 1-216-805-11 METAL CHIP 47 5% 1/10W R002 1-216-857-11 METAL CHIP 1M 5% 1/10W < TRANSISTOR > R005 1-216-830-11 METAL CHIP 5.6K 5% 1/10W R006 1-216-824-11 METAL CHIP 1.8K 5% 1/10W Q101 8-759-054-48 TRANSISTOR C010-PW2000SV-V110 R007 1-216-845-11 METAL CHIP 100K 5% 1/10W Q102 8-759-054-48 TRANSISTOR C010-PW2000SV-V110 Q103 8-729-056-00 TRANSISTOR MCH3310-TL-E R008 1-216-833-11 METAL CHIP 10K 5% 1/10W R010 1-216-818-11 METAL CHIP 560 5% 1/10W < RESISTOR > R011 1-216-121-11 RES-CHIP 1M 5% 1/10W R012 1-216-803-11 METAL CHIP 33 5% 1/10W R006 1-220-175-11 RES-CHIP 240 5% 1/16W R007 1-208-690-11 RES-CHIP 2K 5% 1/16W < TRANSFORMER > R008 1-218-947-11 RES-CHIP 330 5% 1/16W R009 1-218-954-11 RES-CHIP 1.2K 5% 1/16W 0T001 1-439-714-21 DC-DC CONVERTER TRANSFORMER R010 1-218-954-11 RES-CHIP 1.2K 5% 1/16W R011 1-218-955-11 RES-CHIP 1.5K 5% 1/16W A-7078-615-A SW-386 BOARD, COMPLETE R012 1-218-954-11 RES-CHIP 1.2K 5% 1/16W *********************** R013 1-218-959-11 RES-CHIP 3.3K 5% 1/16W R014 1-218-955-11 RES-CHIP 1.5K 5% 1/16W < BATTERY > R015 1-218-959-11 RES-CHIP 3.3K 5% 1/16W 0BT001 1-756-348-11 BATTERY, LITHIUM (SECONDARY) R016 1-218-990-11 SHORT CHIP 0 R017 1-218-981-11 RES-CHIP 220K 5% 1/16W < CAPACITOR > R103 1-218-990-11 SHORT CHIP 0 R104 1-218-953-11 RES-CHIP 1K 5% 1/16W C001 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V R106 1-218-990-11 SHORT CHIP 0 C003 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V C102 1-125-839-91 TANTAL. CHIP 47uF 20% 6.3V R108 1-218-990-11 SHORT CHIP 0 C103 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16V R111 1-218-975-11 RES-CHIP 68K 5% 1/16W C104 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16V R112 1-208-707-11 METAL CHIP 10K 0.5% 1/16W R113 1-208-935-11 METAL CHIP 100K 0.5% 1/16W The components identified by Les composants identifiés par une mark 0 or dotted line with marque 0 sont critiques pour la mark 0 are critical for safety. sécurité. Replace only with part num- Ne les remplacer que par une pièce 5-7 ber specified. portant le numéro spécifié.,

SW-386

Ref. No. Part No. Description Ref. No. Part No. Description R115 1-208-635-11 RES-CHIP 10 5% 1/16W R116 1-208-635-11 RES-CHIP 10 5% 1/16W R117 1-208-635-11 RES-CHIP 10 5% 1/16W R120 1-218-973-11 RES-CHIP 47K 5% 1/16W R121 1-218-961-11 RES-CHIP 4.7K 5% 1/16W R122 1-218-981-11 RES-CHIP 220K 5% 1/16W R123 1-218-973-11 RES-CHIP 47K 5% 1/16W R124 1-218-979-11 RES-CHIP 150K 5% 1/16W R125 1-218-990-11 SHORT CHIP 0 R126 1-216-295-91 SHORT CHIP 0 < SWITCH > S001 1-786-157-11 SWITCH, TACTILE (ZOOM SW (W)) S002 1-786-157-11 SWITCH, TACTILE (ZOOM SW (T)) S003 1-786-157-11 SWITCH, TACTILE (MENU) S004 1-786-157-11 SWITCH, TACTILE ( f (STROBE)) S005 1-786-157-11 SWITCH, TACTILE ( g (REVIEW)) S006 1-786-157-11 SWITCH, TACTILE ( a (SET)) S007 1-786-157-11 SWITCH, TACTILE ( G (MACRO)) S008 1-786-157-11 SWITCH, TACTILE ( F SELFTIMER)) S009 1-786-157-11 SWITCH, TACTILE (DISPLAY/LCD ON/OFF) S010 1-786-157-11 SWITCH, TACTILE (IMAGE SIZE/DELETE)

Electrical parts list of the SY-83 board is not

shown.

Pages 5-9 to 5-13 are not shown.

5-8,

Checking supplied accessories.

Power cord (1) AC adaptor NP-FC11 battery pack (1) Wrist strap (1) 0 1-696-819-11 (AUS) AC-LS5 (1) 3-070-841-01 0 1-769-608-11 (AEP, E) 0 1-477-730-11 (EXCEPT CH) 0 1-776-985-11 (KR) 0 1-477-730-21 (CH) 0 1-782-476-11 (CH) 0 1-783-374-11 (UK, HK) 0 1-790-107-22 (US, CND) 0 1-790-732-11 (JE, J)

Other accessories

3-080-890-02 MANUAL, INSTRUCTION (for BASIC) (JAPANESE) (J) 3-080-890-11 MANUAL, INSTRUCTION (ENGLISH) (US, CND, AEP, UK, E, AUS, CH, HK, JE) 3-080-890-21 MANUAL, INSTRUCTION (FRENCH, GERMAN) (CND, AEP) USB cable (1) A/V connecting cable (1) 3-080-890-31 MANUAL, INSTRUCTION (SPANISH, PORTUGUESE) 1-827-038-11 1-824-111-11 (AEP, E, JE) 3-080-890-41 MANUAL, INSTRUCTION (ITALIAN, DUTCH) (AEP) 3-080-890-51 MANUAL, INSTRUCTION (TRADITIONAL CHINESE, SIMPLIFIED CHINESE) (E, CH, HK, JE) 3-080-890-61 MANUAL, INSTRUCTION (RUSSIAN, SWEDISH) (AEP) "Memory Stick" (16MB) (1) CD-ROM 3-080-890-71 MANUAL, INSTRUCTION (ARABIC) (E) (SPVD-010 USB driver) (1) 3-080-890-81 MANUAL, INSTRUCTION (KOREAN) (KR) 3-078-942-02 (EXCEPT US, CND, J) 3-080-891-01 MANUAL, INSTRUCTION (for APPLICATION) 3-078-943-02 (US, CND, J) (JAPANESE) (J) Conversion Adaptor (1) Conversion Adaptor (1) 0 1-569-008-12 (E) 0 1-569-007-11 (E, JE) The components identified by Les composants identifiés par une mark 0 or dotted line with marque 0 sont critiques pour la mark 0 are critical for safety. sécurité. Replace only with part num- Ne les remplacer que par une pièce ber specified. portant le numéro spécifié. 5-14E,

Sony EMCS Co. 2004J0500-19-876-226-31 ©2004.10

— 80 — Published by DI Technical Support Section,

Reverse 987622633.pdf Revision History

Ver. Date History Contents S.M. Rev. issued 1.0 2003.03 Official Release — — 1.1 2003.06 Correction-1 • Correction of PRINTED WIRING BOARD Yes (C1) S.M. correction : Page 4-49 1.2 2004.10 Correction-2 • Correction of SERVICE NOTE Yes (C2) S.M. correction : Page 1-1]
15

Similar documents

DSC-P9 SERVICE MANUAL LEVEL 2 US Model Ver 1.0 2002. 04 Canadian Model UK Model E Model Hong Kong Model Australian Model Chinese Model Korea Model Tourist Model
DSC-P9 SERVICE MANUAL LEVEL 2 US Model Ver 1.0 2002. 04 Canadian Model Revision History AEP Model UK Model E Model Hong Kong Model Australian Model Chinese Model Korea Model Tourist Model Japanese Model Link SPECIFICATIONS BLOCK DIAGRAMS PRINTED WIRING BOARDS SERVICE NOTE FRAME SCHEMATIC DIAGRAMS AD
For the Customers in the U.S.A. Notice on the supplied battery Certain countries may regulate disposal of the battery used to power this product.
DSC-P92 SERVICE MANUAL LEVEL 1 US Model Ver 1.0 2003. 04 Canadian Model Revision History AEP Model UK Model E Model Australian Model Hong Kong Model Korea Model Chinese Model Tourist Model Brazilian Model Japanese Model Link SPECIFICATIONS SELF DIAGNOSIS FUNCTION ORNAMENTAL PARTS • INSTRUCTION MANUA
Note: This equipment has been tested and found to For the Customers in the U.S.A.
DSC-P93 SERVICE MANUAL LEVEL 1 US Model Ver 1.0 2004.03 Canadian Model Revision History AEP Model UK Model E Model Hong Kong Model Australian Model Chinese Model Korea Model Argentine Model Brazilian Model Tourist Model Link SPECIFICATIONS SELF DIAGNOSIS FUNCTION ORNAMENTAL PARTS • INSTRUCTION MANUA
DSC-R1 SERVICE MANUAL LEVEL 1 US Model Ver 1.0 2005.10 Canadian Model UK Model E Model Australian Model Hong Kong Model Chinese Model Korea Model Japanese Model
DSC-R1 SERVICE MANUAL LEVEL 1 US Model Ver 1.0 2005.10 Canadian Model Revision History AEP Model UK Model E Model Australian Model Hong Kong Model Chinese Model Korea Model Japanese Model Tourist Model Link SPECIFICATIONS ACCESSORIES INSTRUCTION MANUAL SERVICE NOTE The components identified by Les c
DSC-R1 SERVICE MANUAL LEVEL 3 US Model Ver 1.1 2005.11 Canadian Model UK Model Hong Kong Model Chinese Model Korea Model Japanese Model Tourist Model
DSC-R1 SERVICE MANUAL LEVEL 3 US Model Ver 1.1 2005.11 Canadian Model Revision History AEP Model UK Model How to use E Model Acrobat Reader Australian Model Hong Kong Model Chinese Model Korea Model Japanese Model Tourist Model Link FRAME SCHEMATIC DIAGRAM PRINTED WIRING BOARDS REPAIR PARTS LIST SCH
DSC-R1 SERVICE MANUAL LEVEL 2 US Model UK Model Hong Kong Model Chinese Model Korea Model Japanese Model Tourist Model
DSC-R1 SERVICE MANUAL LEVEL 2 US Model Ver 1.0 2005.10 Canadian Model Revision History AEP Model UK Model How to use E Model Acrobat Reader Australian Model Hong Kong Model Chinese Model Korea Model Japanese Model Tourist Model Link SPECIFICATIONS BLOCK DIAGRAMS PRINTED WIRING BOARDS SERVICE NOTE FR
DSC-R1 SERVICE MANUAL LEVEL 3 US Model Ver 1.2 2006.05 Canadian Model UK Model Hong Kong Model Chinese Model Korea Model Japanese Model Tourist Model
DSC-R1 SERVICE MANUAL LEVEL 3 US Model Ver 1.2 2006.05 Canadian Model Revision History AEP Model UK Model How to use E Model Acrobat Reader Australian Model Hong Kong Model Chinese Model Korea Model Japanese Model Tourist Model Link FRAME SCHEMATIC DIAGRAM PRINTED WIRING BOARDS REPAIR PARTS LIST SCH
SAFETY-RELATED COMPONENT WARNING!!
DSC-S30/S50 SERVICE MANUAL AEP Model UK Model Level 1 Ver 1.3 2004. 07 Photo: DSC-S30 SPECIFICATIONS System Output connector Operation temperature Storage temperature Image device A/V OUT (Monaural) 32˚F to 104˚F –4˚F to +140˚F 1/2.7 type color CCD (DSC-S50 only) (0˚C to 40˚C) (–20˚C to +60˚C) Minij
SAFETY-RELATED COMPONENT WARNING!!
DSC-S30/S50 SERVICE MANUAL AEP Model UK Model Level 1 Ver 1.1 2000. 09 With SUPPLEMENT-1 (9-929-819-81) Photo: DSC-S30 SPECIFICATIONS System Output connector Operation temperature Storage temperature Image device A/V OUT (Monaural) 32˚F to 104˚F –4˚F to +140˚F 1/2.7 type color CCD (DSC-S50 only) (0˚
- : Points changed portion.
DSC-S30/S50 US Model Canadian Model SERVICE MANUAL AEP ModelUK Model Level2EModel Hong Kong Model Ver 1.3 2004. 07 Australian Model Chinese Model Korea Model Tourist Model Japanese Model CORRECTION-1 File this correction with the service manual. • Correction of SCHEMATIC DIAGRAMS • Correction of EXP
DSC-R1 SERVICE MANUAL LEVEL 2 US Model UK Model Hong Kong Model Chinese Model Korea Model Japanese Model Tourist Model
DSC-R1 SERVICE MANUAL LEVEL 2 US Model Ver 1.1 2005.11 Canadian Model Revision History AEP Model UK Model How to use E Model Acrobat Reader Australian Model Hong Kong Model Chinese Model Korea Model Japanese Model Tourist Model Link SPECIFICATIONS BLOCK DIAGRAMS PRINTED WIRING BOARDS SERVICE NOTE FR
Supplied accessories
DSC-S30/S50 SERVICE MANUAL US Model Ver 1.1 2000. 09 Canadian ModelLevel 2 With SUPPLEMENT-1(9-929-819-82) AEP Model UK Model E Model Hong Kong Model Australian Model Chinese Model Korea Model Tourist Model Photo: DSC-S30 Japanese Model This service manual contains information for Japanese model as
! : Points deleted portion.
DSC-S40 Auto-ADJ SERVICE MANUAL Ver 1.1 2005.11 CORRECTION-1 We will inform you that there are printing errors in the service manual previously issued. • Correction of the Before starting adjustment • Correction of the Table 6-1-1 • Correction of the Service tool DSC-S40 2005K0500-1© 2005.11 9-876-8
& : Points added portion.
DSC-S40 LEVEL 2 US Model SERVICE MANUAL Canadian Model AEP Model Ver 1.2 2005.09 UK Model E Model Australian Model Hong Kong Model Chinese Model Korea Model Japanese Model SUPPLEMENT-1 Tourist Model File this supplement with the service manual. (PV05-041) • Change of Repair Parts Suffix No. of ST-11
SPECIFICATIONS Camera [Power, general]
DSC-S40 SERVICE MANUAL LEVEL 2 US Model Ver 1.0 2005.03 Canadian Model Revision History AEP Model UK Model How to use E Model Acrobat Reader Australian Model Hong Kong Model Chinese Model Korea Model Japanese Model Tourist Model Link SPECIFICATIONS BLOCK DIAGRAMS PRINTED WIRING BOARDS SERVICE NOTE F
SPECIFICATIONS Camera [Power, general]
DSC-S40 SERVICE MANUAL LEVEL 2 US Model Ver 1.1 2005.06 Canadian Model Revision History AEP Model UK Model How to use E Model Acrobat Reader Australian Model Hong Kong Model Chinese Model Korea Model Japanese Model Tourist Model Link SPECIFICATIONS BLOCK DIAGRAMS PRINTED WIRING BOARDS SERVICE NOTE F
TABLE OF CONTENTS
DSC-S30/S50 SERVICE MANUAL US Model Canadian Model Level 3 Ver 1.1 2000. 09 With SUPPLEMENT 1 AEP Model (9-929-819-83) UK Model E Model Hong Kong Model Australian Model Chinese Model Korea Model Tourist Model Photo: DSC-S30 Japanese Model This service manual contains information for Japanese model a
SPECIFICATIONS Camera [Power, general]
DSC-S40 SERVICE MANUAL LEVEL 2 US Model Ver 1.2 2005.09 Canadian Model Revision History AEP Model UK Model How to use E Model Acrobat Reader Australian Model Hong Kong Model Chinese Model Korea Model Japanese Model Tourist Model Link SPECIFICATIONS BLOCK DIAGRAMS PRINTED WIRING BOARDS SERVICE NOTE F
SPECIFICATIONS Camera [Power, general]
DSC-S40 SERVICE MANUAL LEVEL 2 US Model Ver 1.2 2005.09 Canadian Model Revision History AEP Model UK Model How to use E Model Acrobat Reader Australian Model Hong Kong Model Chinese Model Korea Model Japanese Model Tourist Model Link SPECIFICATIONS BLOCK DIAGRAMS PRINTED WIRING BOARDS SERVICE NOTE F
SPECIFICATIONS [System] USB communication
DSC-S45 SERVICE MANUAL US Model Ver 1.0 2006.03 Revision History How to use Acrobat Reader Internal memory ON BOARD Link SPECIFICATIONS DISASSEMBLY REPAIR PARTS LIST SERVICE NOTE BLOCK DIAGRAMS The components identified by Les composants identifiés par une mark 0 or dotted line with marque 0 sont cr
SPECIFICATIONS [System] [LCD screen]
DSC-S500 SERVICE MANUAL US Model Ver 1.2 2006.09 Canadian Model Revision History AEP Model UK Model How to use Acrobat Reader E Model Australian Model Hong Kong Model Internal memory Korea Model ON BOARD Link SPECIFICATIONS DISASSEMBLY REPAIR PARTS LIST SERVICE NOTE BLOCK DIAGRAMS The components ide
SPECIFICATIONS [System] [LCD screen]
DSC-S500 SERVICE MANUAL US Model Ver 1.1 2006.07 Canadian Model Revision History AEP Model UK Model How to use Acrobat Reader E Model Australian Model Hong Kong Model Internal memory Korea Model ON BOARD Link SPECIFICATIONS DISASSEMBLY REPAIR PARTS LIST SERVICE NOTE BLOCK DIAGRAMS The components ide
These specifications are extracted from instruction
DSC-S600 SERVICE MANUAL LEVEL 2 US Model Ver 1.0 2005. 12 Canadian Model Revision History AEP Model UK Model How to use E Model Acrobat Reader Australian Model Chinese Model Internal memory Brazilian Model ON BOARD Hong Kong Model Korea Model Link SPECIFICATIONS BLOCK DIAGRAMS PRINTED WIRING BOARDS
SAFETY CHECK-OUT
DSC-S600 SERVICE MANUAL LEVEL 3 US Model Ver. 1.1 2006. 07 Canadian Model Revision History AEP Model UK Model How to use E Model Acrobat Reader Australian Model Chinese Model Internal memory Brazilian Model ON BOARD Hong Kong Model Korea Model Link SERVICE NOTE SCHEMATIC DIAGRAMS REPAIR PARTS LIST F
These specifications are extracted from instruction
DSC-S600 SERVICE MANUAL LEVEL 1 US Model Ver 1.0 2005. 12 Canadian Model Revision History AEP Model UK Model E Model Australian Model Chinese Model Brazilian Model Hong Kong Model Korea Model Link SPECIFICATIONS ACCESSORIES SELF-DIAGNOSIS FUNCTION INSTRUCTION MANUAL Note : Note : The components iden
SPECIFICATIONS Camera [Power, general] Cyber-shot Station CSS-SA
DSC-S60/S80/S90/ST80 SERVICE MANUAL LEVEL 1 DSC-S60/S90 Ver 1.1 2005.07 US Model Canadian Model Revision History Chinese Model Tourist Model DSC-S60/S80/S90/ ST80 AEP Model UK Model E Model Hong Kong Model DSC-S60/S80/S90 Australian Model Korea Model DSC-S90 Photo: DSC-S90/Silver Argentine Model Lin
SPECIFICATIONS Camera [Power, general] Cyber-shot Station CSS-SA
DSC-S60/S80/S90/ST80 SERVICE MANUAL LEVEL 2 DSC-S60/S90 Ver 1.0 2005.03 US Model Canadian Model Revision History Chinese Model Tourist Model DSC-S60/S80/S90/ How to use Acrobat Reader ST80 AEP Model UK Model E Model Hong Kong Model DSC-S60/S80/S90 Australian Model Korea Model DSC-S90 Photo: DSC-S90/
SPECIFICATIONS Camera [Power, general] Cyber-shot Station CSS-SA
DSC-S60/S80/S90/ST80 SERVICE MANUAL LEVEL 2 DSC-S60/S90 Ver 1.1 2005.07 US Model Canadian Model Revision History Chinese Model Tourist Model DSC-S60/S80/S90/ How to use Acrobat Reader ST80 AEP Model UK Model E Model Hong Kong Model DSC-S60/S80/S90 Australian Model Korea Model DSC-S90 Photo: DSC-S90/
Supplied accessories
DSC-S70 SERVICE MANUAL US Model Canadian Model Level 2 Ver. 1.2 2001.07 AEP Model UK Model E model Hong Kong Model Australian Model Chinese Model Korea Model Tourist Model Japanese Model This service manual contains information for Japanese model as well. On the SY-58 board SY-58 board This service
SAFETY-RELATED COMPONENT WARNING!!
DSC-S75 SERVICE MANUAL AEP Model UK Model Level 1 Ver 1.2 2001. 11 SPECIFICATIONS System Flash General AC-L10A/B/C Accessories Image device Recommended recording Used battery pack AC power adaptor A/V connecting cable (1) 8.93 mm (1/1.8 type) color distance (ISO is set to AUTO): NP-FM50 Power requir