Download: These specifications are extracted from instruction

DSC-S600 SERVICE MANUAL LEVEL 2 US Model Ver 1.0 2005. 12 Canadian Model Revision History AEP Model UK Model How to use E Model Acrobat Reader Australian Model Chinese Model Internal memory Brazilian Model ON BOARD Hong Kong Model Korea Model Link SPECIFICATIONS BLOCK DIAGRAMS PRINTED WIRING BOARDS SERVICE NOTE FRAME SCHEMATIC DIAGRAMS REPAIR PARTS LIST DISASSEMBLY SCHEMATIC DIAGRAMS • Precaution on Replacing the SY-145 board Note : Note : The components identified by Les composants identifiés par mark 0 or dotted line with mark une marque 0 sont critiques 0 are critical for safety. pour la sé...
Author: 阿由葉 Shared: 8/19/19
Downloads: 909 Views: 3442

Content

DSC-S600 SERVICE MANUAL LEVEL 2 US Model Ver 1.0 2005. 12 Canadian Model

Revision History AEP Model

UK Model

How to use E Model Acrobat Reader Australian Model

Chinese Model

Internal memory Brazilian Model ON BOARD Hong Kong Model

Korea Model Link

SPECIFICATIONS BLOCK DIAGRAMS PRINTED WIRING BOARDS SERVICE NOTE FRAME SCHEMATIC DIAGRAMS REPAIR PARTS LIST DISASSEMBLY SCHEMATIC DIAGRAMS • Precaution on Replacing the SY-145 board Note : Note : The components identified by Les composants identifiés par mark 0 or dotted line with mark une marque 0 sont critiques 0 are critical for safety. pour la sécurité. Replace only with part number Ne les remplacer que par une specified. pièce portant le numéro spécifié.

DIGITAL STILL CAMERA

2005L1600-1 DSC-S600_L2 ©2005.12 9-876-922-31 Sony EMCS Co. Published by DI Technical Support Department,

These specifications are extracted from instruction

manual of DSC-S600 (2-658-425-11).

SPECIFICATIONS Camera [Power, general]

[System] Power R6 (size AA) Alkaline batteries (2), 3 V Image device 7.18 mm (1/2.5 type) color HR 15/51:HR6 (size AA) CCD, Primary color filter Nickel-Metal Hydride batteries Total pixel number of camera (2, not supplied), 2.4 V Approx. 6 183 000 pixels ZR6 (size AA) Oxy Nickel Primary Battery (2, not Effective pixel number of camera supplied), 3 V Approx. 6 003 000 pixels AC-LS5K AC Adaptor (not Lens Carl Zeiss Vario-Tessar supplied), 4.2V3zoom lens Power consumption f = 5.1 – 15.3 mm (31 – 93 mm (during shooting with the LCD screen on) when converted to a 35 mm still camera) 1.0 W F2.8 – 5.1 Operating temperature Automatic ND filter switching 0°C to +40°C (+32°F to Exposure control Automatic exposure, Scene +104°F) Selection (7 modes) Storage temperature White balance Automatic, Daylight, Cloudy, –20°C to +60°C (–4°F to Fluorescent, Incandescent +140°F) File format (DCF compliant) Dimensions 99.952. 0×36.8 mm Still images: Exif Ver. 2.21 (4×2 1/8×1 1/2 inches) JPEG compliant, DPOF (W/H/D, excluding protrusions) compatible Mass Approx. 181 g (6.4 oz) Movies: MPEG1 compliant (including two batteries and (Monaural) wrist strap, etc.) Recording media Internal Memory (32 MB) Microphone Electret condenser microphone “Memory Stick Duo” Speaker Dynamic speaker Flash Recommended distance (ISO set to Auto): approx. 0.2 m to Exif Print Compatible 7.0 m (7 7/8 inches to 275 5/8 PRINT Image Matching III inches) (W)/approx. 0.5 m to Compatible 3.8 m (19 3/4 inches to 149 5/8 inches) (T) PictBridge Compatible [Input and Output connectors] Design and specifications are subject to change USB jack mini-B without notice. USB communication Hi-Speed USB (USB 2.0 compliant) [LCD screen] LCD panel 5.1 cm (2.0 type) TFT drive Total number of dots 84 960 (354×240) dots — 2 —,

SAFETY CHECK-OUT

After correcting the original service problem, perform the following safety checks before releasing the set to the customer. 1. Check the area of your repair for unsoldered or poorly-soldered Unleaded solder connections. Check the entire board surface for solder splashes Boards requiring use of unleaded solder are printed with the lead- and bridges. free mark (LF) indicating the solder contains no lead. 2. Check the interboard wiring to ensure that no wires are (Caution: Some printed circuit boards may not come printed with the lead free mark due to their particular size.) "pinched" or contact high-wattage resistors. 3. Look for unauthorized replacement parts, particularly transistors, that were installed during a previous repair. Point : LEAD FREE MARK them out to the customer and recommend their replacement. Unleaded solder has the following characteristics. 4. Look for parts which, through functioning, show obvious signs • Unleaded solder melts at a temperature about 40°C higher than of deterioration. Point them out to the customer and ordinary solder. recommend their replacement. Ordinary soldering irons can be used but the iron tip has to be applied to the solder joint for a slightly longer time. 5. Check the B+ voltage to see it is at the values specified. Soldering irons using a temperature regulator should be set to 6. Flexible Circuit Board Repairing about 350°C. • Keep the temperature of the soldering iron around 270˚C Caution: The printed pattern (copper foil) may peel away if the during repairing. heated tip is applied for too long, so be careful! • Do not touch the soldering iron on the same conductor of the • Strong viscosity circuit board (within 3 times). Unleaded solder is more viscous (sticky, less prone to flow) than • Be careful not to apply force on the conductor when soldering ordinary solder so use caution not to let solder bridges occur such or unsoldering. as on IC pins, etc. • Usable with ordinary solder It is best to use only unleaded solder but unleaded solder may also be added to ordinary solder. SAFETY-RELATED COMPONENT WARNING!! ATTENTION AU COMPOSANT AYANT RAPPORT À LA SÉCURITÉ! COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE WITH LES COMPOSANTS IDENTIFÉS PAR UNE MARQUE 0 SUR LES MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU PUBLISHED BY SONY. DANS LES SUPPÉMENTS PUBLIÉS PAR SONY. CAUTION : Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. — 3 —, TABLE OF CONTENTS 1. SERVICE NOTE 1-1. DESCRIPTION ON SELF-DIAGNOSIS DISPLAY ······1-1 1-2. METHOD FOR COPYING OR ERASING THE DATA IN INTERNAL MEMORY ··················································1-2 1-3. PRECAUTION ON REPLACING THE SY-145 BOARD ···········································································1-3 1-4. INITIAL LANGUAGE DATA CHECK ··························1-3 1-5. HOW TO OPERATE THE CAMERA WITHOUT THE FRONT CABINET ··························································1-3 2. DISASSEMBLY 2-1. DISASSEMBLY ······························································2-3 3. BLOCK DIAGRAMS 3-1. OVERALL BLOCK DIAGRAM ····································3-1 3-2. POWER BLOCK DIAGRAM ·········································3-3 4. PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS 4-1. FRAME SCHEMATIC DIAGRAM ································4-1 4-2. SCHEMATIC DIAGRAMS ············································4-5 4-3. PRINTED WIRING BOARDS ·····································4-27 4-5. MOUNTED PARTS LOCATION ·································4-36 5. REPAIR PARTS LIST 5-1. EXPLODED VIEWS ······················································5-3 5-2. ELECTRICAL PARTS LIST ··········································5-6 — 4 —, 1. SERVICE NOTE 1-1. DESCRIPTION ON SELF-DIAGNOSIS DISPLAY Self-diagnosis display • C: ss: ss You can reverse the camera malfunction yourself. (However, contact your Sony dealer or local authorized Sony service facility when you cannot recover from the camera malfunction.) • E: ss: ss Contact your Sony dealer or local authorized Sony service facility. Display Code Countermeasure Cause Caution Display During Error C:32:ss Turn the power off and on again. Trouble with hardware. SYSTEM ERROR Format the “Memory Stick Duo” or “Memory Stick Duo” or internal memory is FORMAT ERROR internal memory. unformatted. C:13:ss Insert a new “Memory Stick Duo”. “Memory Stick Duo” is broken. MEMORY STICK ERROR Turn the power off and on again. Trouble with internal memory. INTERNAL MEMORY ERROR E:61: Checking of lens drive circuit. When failed in the focus and zoomss initialization. Checking of flash unit or replacement Abnormality when flash is being — E:91:ss of flash unit. charged. E:92:ss Insert batteries correctly. Batteries are not inserted correctly. 1-1, 1-2. METHOD FOR COPYING OR ERASING THE DATA IN INTERNAL MEMORY

The data can be copied/erased by the operations on the Setup screen. (When erasing the data, execute formatting the internal memory.)

Note1: When replacing the SY-145 board, erase the data in internal memory of the board before replacement. Note2: When replacing the SY-145 board or the IC203 on the SY-145 board, execute formatting and initialize the internal memory after replacement.

Method for Copying the Data in Internal Memory

Copy Copies all images in the internal memory to a “Memory Stick Duo”. OK See the following procedure. Cancel Cancels the copying. 1 Insert a “Memory Stick Duo” having 32 MB or larger capacity. 2 Select [OK] with v on the control button, then press z. The message “All data in internal memory will be copied Ready?” appears. 3 Select [OK] with v, then press z. Copying starts. Use batteries with enough capacity or the AC Adaptor (not supplied). If you attempt to copy image files using batteries with little remaining capacity, the batteries may run out, causing copying to fail or possibly corrupting the data. You cannot copy individual images. The original images in the internal memory are retained even after copying. To delete the contents of the internal memory, remove the “Memory Stick Duo” after copying, then execute the [Format] command in (Internal Memory Tool) (page 46). You cannot select a folder copied on a “Memory Stick Duo”. Even if you copy data, a (Print order) mark is not copied.

Method for Formatting the Internal Memory

This item does not appear when a “Memory Stick Duo” is inserted in the camera. The default settings are marked with . Format Formats the internal memory. • Note that formatting irrevocably erases all data in the internal memory, including even protected images. OK See the following procedure. Cancel Cancels the formatting. 1 Select [OK] with v on the control button, then press z. The message “All data in internal memory will be erased Ready?” appears. 2 Select [OK] with v, then press z. The format is complete. 1-2, 1-3. PRECAUTION ON REPLACING THE SY-145 BOARD • The Repair Board has already been adjusted. Re-initialization or EVR data copy from the set before repair is not required. • Perform “Initial Language Data Check” mentioned below, and also the adjustment items necessary after SY Board replacement. 1-4. INITIAL LANGUAGE DATA CHECK If the SY-145 board was replaced, initial language setting may be changed. Accordingly, change the following data so as to set same initial language as that of the set distributing in each region. Initial language: Language displayed at the next starting if the setting of Setup menu was reset. It is different from the language setting selectable with the menu. Initial Language Data Page Address Data Language GP2 GP3 GP4 00 Englishzzz04 Spanishzz06 Portugal z 4F 8C 08 Simplified Chinese z 0B Russian z 0D Korean z Note: GP2 is fixed to English. GP3 is either English, Spanish, or Russian. GP4 is either English, Spanish, Portugal, Simplified Chinese, or Korean. Writing Method: 1) Select page: 00, address: 01 and set data: 01. 2) Select page: 4F, address: 8C, and set the Initial Language Data. 3) Select page: 40, address: 38, and set data: 00. 4) Click [Save] on the SEUS screen. 5) Select page: 80, address: 34, and check that the data is “00”. 6) Select page: 80, address: 30, and check that the data is “00”. 7) Select page: 00, address: 01, and set data: 00. 8) Turn off the camera. 9) Turn on the camera. Execute “Initialize” of Setup screen. 10) Check the language displayed when the camera starts. 1-5. HOW TO OPERATE THE CAMERA WITHOUT THE FRONT CABINET Remove the LB-117 board from the cabinet (front) asembly, solder the leads to the SW-461 board, and fix the S101 switch (Lens barrier open) to the ON position with an adhesive tape. S101 switch (Lens barrier open) LB-117 board Adhesive tape Cabinet (front) assembly LB-117 board SW-461 board Remove the claw solder the leads 1-3E, 2. DISASSEMBLY Link

DISASSEMBLY HELP

COMMON NOTE FOR DISASSEMBLY, 2. DISASSEMBLY 2. DISASSEMBLY

NOTE FOR REPAIR

Make sure that the flat cable and flexible board are not cracked of When remove a connector, don't pull at wire of connector. bent at the terminal. Be in danger of the snapping of a wire. Do not insert the cable insufficiently nor crookedly. When installing a connector, don't press down at wire of connector. Be in danger of the snapping of a wire. Cut and remove the part of gilt which comes off at the point. (Take care that there are some pieces of gilt left inside)

DISCHARGING OF THE FLASHLIGHT POWER SUPPLY CAPACITOR

The charging elect capacitor 180uF (330V) is charged up to the Discharging the Capacitor maximum 300 V potential. Short circuits between the positive and the negative terminals of There is a danger of electric shock by this high voltage when the charged capacitor with the short jig about 10 seconds. capacitor is handled by hand. The electric shock is caused by the charged voltage which is kept without discharging when the main power of the DSC-S600 is simply turned off. Therefore, the remaining voltage must be discharged as described below. Preparing the Short Jig To preparing the short jig. a small clip is attached to each end of a resistor of 1 kW /1 W (1-215-869-11) Wrap insulating tape fully around the leads of the resistor to prevent electrical shock. Capacitor Shorting jig (1kΩ / 1W) 1 kΩ/1 W Wrap insulating tape.

SY-145

2-1, 2. DISASSEMBLY 2. DISASSEMBLY

The following flow chart shows the disassembly procedure.

2-1. DISASSEMBLY 8 Refer to page 2-1 "DISCHARGING OF HELP 01 THE FLASHLIGHT POWER SUPPLY 3

CAPACITOR (LND904, LND905)",

when discharging the capacitor.

SY-145

2 7 HELP 02 5 HELP 03 1 Three solderings 1 Slide the BT cover. 5 Screw (M1.7x4) 2 Two solderings 2 Screw (M1.7x4) 6 Screw (M1.7x4) 3 Open the BT cover. 3 Open the USB cover. 7 Open the cabinet (upper) assembly. 4 Open the cabinet (upper) assembly. 4 Screw (M1.7x4) 8 Cabinet (rear) assembly 5 Cabinet (front) assembly1A(See page 2-5) HELP 042732

SY-1 (See page 2-5) 4 C5 SY S-1 Y4 -15 45

5 Flexible board (from the lens block assembly) 1 Screw (M1.7x4) 1 Two solderings 6 Flexible flat cable (FFC-058) 1 Two solderings 2 Two claws B (See page 2-5) 2 Claw 7 Flexible flat cable (FFC-056) 2 Flexible board (from the LCD unit) 3 RL-063 board 3 Two claws 8 SY-145 board, RL-063 board, 3 LCD unit 4 Cabinet (upper) assembly 4 Flexible board (from the lens block assembly) speaker, microphone, etc. 2-3 2-4, 2. DISASSEMBLY RL-063 SW-461

A SY-145

2631Flexible flat cable (FFC-058) HELP 05 HN-015 2 Flexible board (from the optical unit) 3 3 Screw (M1.7x4) 4 LCD frame 5 SW-461 board, flexible flat cable (FFC-058) 4 HELP 061S

C Y- S 14Y 5-145

1 Two solderings 4 Two solderings 1 Two solderings 2 Speaker holder 5 Miclophone holder 2 Elect 180uF (330V) capacitor 3 Speaker 6 Miclophone 3 Three solderings 4 Flash unit, harness (HN-015) 5 SY-145 board, RL-063 board,

S flexible flat cable (FFC-056), etc.Y-145 B

1 Flexible board (from the lens block assembly) 4 2 Flexible board (from the lens block assembly) 3 Flexible board (from the optical unit) 4 Lens block assembly, optical unit. 2-5 2-6E,

HELP Disassembling and assembling procedures that require attention are described here.

HELP 01 When installing the Cabinet (Rear) assembly, install it while aligning the Mode switch of the SW-461 board with the position A of the Cabinet (Rear) assembly. Mode Switch of the SW-461 board Cabinet (rear) assembly

A

HELP 02 Solder each lead according to the color (Y: yellow, G: gray, W: white, R: red, B: black) displayed on the SW-461 board. Two reads (from the BM-001 board) Red Black Tree reads (from the LB-117 board) Yellow Gray White SW-461 board

HELP

, HELP 03 SY-145 When installing the cabinet (front) asembly, When installing the cabinet (front) asembly, put the lead lines in the space between the put the lead lines in the space between optical unit and the DC mortor. the tripod screw and the SW-461 board. SW-461 board Optical unit Tripod screw DC mortor HELP 04 Solder each lead according to the color (R: red, B: black) displayed on the SY-145 board. Black Red SY-145 board LCD leads

HELP

, HELP 05 Solder each lead according to the color (R: red, B: black) displayed on the SY-145 board. Mic unit Red Black SY-145 board Speaker HELP 06 Give folding to the flexible flat cable (FFC-057). RL-063 board Flexible flat cable (FFC-057) Peak folding Valley folding RL-063 board Flexible flat cable Valley folding (FFC-057) Peak folding SY-145 board SY-145 board

HELP

, 3. BLOCK DIAGRAMS Link OVERALL BLOCK DIAGRAM POWER BLOCK DIAGRAM, 3. BLOCK DIAGRAMS 3-1. OVERALL BLOCK DIAGRAM ( ) : Number in parenthesis ( ) indicates the division number of schematic diagram where the component is located. CCD IMAGER and CD-606 FLEXIBLE BOARD are included in the LENS BLOCK ASSY (A-1156-857-A). FFC-056

LENS UNIT X102

(FLEXIBLE FLAT CABLE) (2/3)

CD-606 FLEXIBLE BOARD SY-145 BOARD 33.75MHz(LSV-951A) IRIS XTAL OSC CLKTGEXT

SHUTER C1 SW-461 BOARD (2/3) 8 D003 K5,G4,H4,L5 (ACCESS) 4,3,5,7,2,897,98,100,101 AC4,AE4 CN002 103,104,105,3 CA AD0 - CA AD13 H2,H1,J1,J2 AE5,AC5 MS D0-MS D3, MS BS, MS CLK 13,12,14,16,11,17 MS D0-MS D3, MS BS, MS CLK S/H 2,4,7,10,14,18 M5,J4,K4,M6

MEMORY

CCD IMAGER AB6,AF6CCD OUT K2,K1 STICKA/D CONV. X101 (3/8) XMS IN 6 Duo8 60 12MHz 15 CONNECTOR (1/8) XTAL OSC EXTAL A6 XACCESS LED CN006IC101 E4

IC301 BL HCAMERA DSP BL L

H1A,B CLK TGO E1 19 56 SYSTEM CONTROLH2A,B 37 F2 17 RG 40 20 44 77 CA HD CA FD H5 E8,E7,D6 17 18 LCD D2-D748 80 J5 D5,E6,B4 | 3 53 LCD HD 22 LCD901

TIMING

CN301 E9 LCD VD 24 2.0 INCHGENERATOR D21,D22,D20,B22,A22,A23, B8 LCD CK 25 COLOR DIGITAL 11,8 B23,E20,E21,B24,A24,A25, D9 23 LCD PANEL 33 32-24,22,13-11 16,12 B25,C25,C26,B26,E10,A10, U2 CN301 V1A,B V3A,B V5A,B V7A,B 9,91 D0-D31 D10,E11,B10,A11,B11,E12, 27 LENS TEMP1 T2LENS SAN1 SO, SI, SCK, XSAN1SCK SAN1 SO, XSAN1SCKV2 V4 V6 V8 VST 5,6 SENSOR LENS TEMP2 (4/8) D11,D12,F12,B12,A12,E13, 26 LCD R6 88,102 D13,D14 BACK TEMP1 24 90,79,76 IC202 XSAN RST OUT LIGHTD17,D18,D16,B18,A19, AF4 30 (2/8) 92 89 93 A0-A12 B19,E16,D19,E19,E17, CN1001256Mbit B20,A20,E18 IRIS MOTOR SDRAM23 IRIS + IC401 IRIS EN DSP QCLK

M 22 IRIS - F8 B8 IRIS IN A18 T90120 E8 IRIS DRIVE C7 ST UNREG XE A(H)

19 SAN 27M CLKO HALL + AF9XSAN RST OUT D9015 HALL -

H A5 F4 (RECT) FLASH3 A8 HALL AMP SAN 27M CLK0H6 15 TRIGGER UNIT

STRB CHG 1 10 COIL ( X E NONR22 HIGH VOLTAGE 2 FOCUS MOTOR F5 XSTRB FULL TUBE) FOCUS + V23 9 CHAGER

M 14 FOCUS - H1 G4 SAN1 SO, SI, XSAN1SCK

(4/8) (4/8) STRB CHG CONT FOCUS MOTOR DRIVE AB22 6 (6/8) Q901 XE K(L)241 F2 G6 ZOOM A IC201 IC203 STRB ON IC9014 7 FLASH C9001R4 ZOOM XA ZM EN IGBT DRIVE DRIVE MAINZOOM MOTOR ZOOM B E1 H3 ZM DIR A BURST SUPER AND CAPACITOR

M 26 ZOOM XB F1 ZOOM MOTOR DRIVE C2 ZM DIR B FLASH MEMORY FLASH MEMORY353 D1 G3

8 C1 B1 D0-D15 A1-A21 D0-D15 A20,A21,A25 FFC-057 (FLEXIBLE FLAT CABLE) ZOOM RESET ZM SENS 1ST LENSV OPEN SAN LENSV OPEN SENSOR1 12 LENSV CLOSE F7 LENS BARREIER H8 SAN LENSV CLOSE AB13,AA13,AE13,AF13, G7 MOTOR DRIVE D6 XAE LOCK SW S201 RL-063 BOARD ZOOM RESET ZM SENS 2ND AF12,AE12,AA12,AC12,AC11,10 CPU_D0-D15 N21 XSHUTTER SW 7 SENSOR2 AB12,AE11,AF11,AE10,AB11, SHUTTER 14 AC10,AB10 P23 6 XPWR LED D23 3 S202 D201 (POWER) 11 AF21,AF20,AE20,AB18,AB19,SHUTTER MOTOR SHUTTER+ SHUTTER DRIVE MSHUT EN CPU_A1-A21,A25 AC19,AB16,AE19,AF19,AF18, XPWR ON 18 SHUTTER- MSHUT DIR POWERM D1 B3(2/8) AE18,AA15,AC18,AC17,AB15, XAF LED LED90115 B1 B4 AE17,AF17,AE16,AB14,AC16, 8 (AF LED) OVF A IC402 AC15,AE14OVF B CN401 IRIS ENOVF XA F2 B5 OVF EN OVF XB F3 B6 OVF DIR A IRIS IN N4

BM-001 E6 OVF ZOOM DRIVE

OVF DIR B P4 C6 ZM EN FFC-056 (FLEXIBLE FLAT CABLE) (3/3)SW-461 D6 C5 ZM DIR AZM DIR B N2 S011

BOARD BOARD N6 MODE DIAL 0L22M2 20 MOVIE / STILL / PLAY SW-461

M001 SAN LENSV OPEN S001, 004, 002, 005, 003 LENS BARRIER OVF A SAN LENSV CLOSE AC14 MOTOR KEY AD0LENSV OPEN (1/3) OVF B AA14 K23 22 DOWN, RIGHT, UP, LEFT, SET BOARD

M LENSV CLOSE 24 OVF XA MSHUT ENOVF XB S007, 009, 008, 010, 006 CN00323 MSHUT DIR R5 KEY AD1 (3/3) (USB)

R25 L23 21 DISPLAY, DUST, MENU, ZOOM WIDE, ZOOM TELE S101 XLENSV SO C5 AB5 SO 3,2 LENS BARRIE OPEN SENS( R ) 25 C6X001 SI SAN0 SO, SI, XSAN0SCK AA5 SI AC1 USB DP, USB DM 2 D+, D- OPEN XLENSV 32.768KHz SCK B6 Y5 SCK AD1 3 S102 CLOSE SENS A8 ( LENSBARRIER 26 OSC I ) BATT SENS D4 K25 BATT SENS 5 USB VBUS 1

CLOSE

CN006

LB-117 BOARD A9 OSC O

R26 VL 3V XDD RST OUT A7 Y4 XDD RST OUT OVF SENS 6 BT001 U4 LITHIUM CN006 (8/8) XPWR OFF B7 AA23 XPWR OFF XAE LOCK LED BATTERY OVF EN F22 1 D002 (AE LOCK) (SECONDARY)EVER 3.1V EVER 2.9V OVF DIR A L4 XSTRB LED

FFC-056 IC001 2D 3.2V OVF DIR B E22 D001 (FLASH)L2

A 3.2V XCS_AUDIO(FLEXIBLE FLAT CABLE) (1/3) N5 Y26 E4DC/DC CONVERTER MS VCC ZM SENS 1ST (5/8) REAL TIME CLOCK CAM 2.9V ZM SENS 2ND V4 F3 SAN1 SO, XSAN1SCK UNREG D 1.8V U5 E3 IC601 8 OVF SENS OPTICALBATT UNREG 7 OVF RESET BATTERY M 5V LENS TEMP1 L26 AUIN OVF A SENSOR VIEWFINDER F002 D 1.2V LENS TEMP2 J25 E6 MIC AMP B6HOLDER OVF BBATT GND B8 VL 3V CAM -7.5V K22 OVF XA 4 UNIT6 BL H XLENSV OPEN SENSE AUOUT OVF XB A5 OVF ZOOM C7 XPWR ON K26 | |BL L XLENSV CLOSE SENSE E5 SPEAKER AMP M Y22 A231MOTOR C9 USB VBUS AC23 CN001 B10 XAF LEDXMS IN A4 CN703 FFC-058 (FLEXIBLE FLAT CABLE)

IC004,005 SAN1 SO, SI, SCK(8/8) A 2.9V

CAM 12V MIC SIG MIC901 2.9V/12V REG MIC MICROPHONE SP+ SP- ST UNREG SP901

SPEAKER

F001 3-1 3-2 SAN1 SO,XSAN1SCK, 3-2. POWER BLOCK DIAGRAM ( ) : Number in parenthesis ( ) indicates the division number of schematic diagram where the component is located.

SY-145 BOARD

T901 D901 FLASH (RECT) F001 L901 XE A(H) UNITBATT UNREG ST UNREG ST UNREG 15 XEN(6/8) ( T U OBEN) BATTERY STRB CHG 10 1

HOLDER

BATT GND XSTRB FULL 9 IC901 2 STRB CHG CONT C9001 6 HIGH VOLTAGE MAIN CHAGER CAPACITOR M5V 3 IGBT DRIVE F002

UNREG

(8/8) (8/8) 4 A 2.9V

IC001 IC004 3 (5/8)PWR1-1 A1 1

PWR1-2 B1 2.9V REG DC/DC CONVERTER PWR1-3 C2 IC601 REAL TIME CLOCK D 3.2V VO1-1 F1 MIC AMP J1 UNREG1-1,2 VO1-2 F2 M 5V SPEAKER AMP D001 K1 VFB1 H2 EVER 2.8V LDO1 H1 3.1V REG L002MS PWR IN G1 R002 VL 3V B8 RTC BAT MS PWR MS VCCG2 R041 A8 OSC I LDO3IN B2 STRB CHG X001 R22

FFC-056 32.768KHzXSTRB FULL A9 OSC O 2.9V REGV23 (3/8)

(FLEXIBLE FLAT CABLE) STRB CHG CONT LDO3 CAM 2.9V AB22 BATT SENS A2

IC101 K25 D4 DTG1 (1/8)LDO2IN

R26 XDD RST OUT B3A7 XRESET D 3.2V CCD IMAGER and CD-606 FLEXIBLE BOARD VL 3V BT001 6 CAMERA DSP Y4 XPWR OFF 1.8V REG IC301 are included in the LENS BLOCK ASSY (A-1156-857-A). LITHIUM SYSTEM CONTROL AA23 B7 XPWR OFF LDO2 D 1.8V BATTERY MS PWR ON MS PWR ON A3 S/H (SECONDARY) T25 D3 UNREG2 PANEL 15V A/D CONV.J6 TIMING GENERATOR CD-606 K6 XCS DD W23 A6 XCS DD SAN0 SO AB5 C5 SAN0 SO PWR56 OUT J7 (8/8) FLEXIBLE BOARD SAN0 SI SAN0 SI K7 Q005, 006AA5 C6

SW-461 XSAN0 SCK Y5 B6 XSAN0 SCK 3L006 IC005 CAM 12V L301 CAM 15V CDLX5-1 J9 15 5 BOARD LX5-2 J10 15V 12V REGP25 -7.5V ON LX5-3 K9 D003

LX5-4 K10 (RECT) Q004 CCD IMAGER D23 XPWR LED SWITCHING & RECT VFB5 H945-7.5V CAM -7.5V CAM -7.5V CD 1 CN002 E22 XSTRB LED21CN301 MEMORY D 3.2V STICK9D3.2V GT6 H6 3 L0099 Duo MS VCC A 2.9V18 VFB6 H7 -7.5V ON CONNECTOR CN006 D 1.2V D 3.2V PWR2 D10 L003 D001 (FLASH) D 1.2V

OPTICAL LX2 C10XSTRB LED

2 LENS UNIT

VIEWFINDER L201 VFB2 D8D 1.8V SD 1.8V F003 (2/8)L005 D 3.2V (LSV-951A) UNIT (4/8)

LX3 BL HE10 D 1.8V IC401 OVF RESET RST VCC R009 D 3.2V IC202 D002 SENSOR89(4/8) (RECT) A 2.9VVO3 E9 IRIS DRIVE CN001 CN703 256Mbit FOCUS MOTOR DRIVE R402 ZM RST1 VCC ZOOM

IC201 SDRAM LV3 F9 BL L ZOOM MOTOR DRIVE 13 RESET1SENSOR FFC-058 BURST RS3 F8

(FLEXIBLE FLAT CABLE) FLASH MEMORY (4/8) L008 Q003 Q001 SWITCH (2/8) R401 ZM RST2 VCC ZOOM

RL-063 D201 (POWER) SWITCHING51M5V M 5V 8 RESET2D 3.2V SENSOR

XPWR LED IC203 3 IC402 CN401BOARD SUPER AND BG4 G9D 3.2V 4 FLASH MEMORY24D3.2V SHUTTER DRIVE S202 OVF ZOOM DRIVE POWER 2 XPWR ON XPWR ON XPWRON1 TG4 F10 C7 Q002 LCD XAF LED RECT BACK LIGHTBLH8A4 XAF LED VFB4 F7 BL L LED901 PSG4 G8 (AF LED)

FFC-057

(FLEXIBLE FLAT CABLE) PANEL 15V L1002 LCD901 -7.5V ON VCC19 D1002 VGH 2.0 INCH D 3.2V L1001 10 VDD COLOR DIGITAL 11 LCD PANEL Q1001 D 3.2V CN1001D 3.2V

DETECT

Q1002 A 2.9V, D 1.8V, D 1.2V, MS VCC 3-3 3-4E, 4. PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS 4-1. FRAME SCHEMATIC DIAGRAM12345678910 11 12 13 14 15 16

A RL-063 BOARD BATTERY HOLDER B FFC-057 FLEXIBLE

FLAT CABLE CN301 33P CAM-7.5V-CD 1 LENS ASSY

C REG_GND 2

RG 3 REG_GND 4 CCD IMAGER and CD-606 FLEXIBLE BOARD are CAM15.0V-CD 5 included in the LENS BLOCK ASSY(A-1156-857-A). and it is not supplied as an independent POWER_SAVE 6 CN1001 33P service parts. REG_GND 7 33 VCOM CCD_OUT 8 32 VSS CCD_GND 9 31 TEST

D REG_GND 1030 XRESET

V8 11 29 BLON V7B 12 28 XCS V7A 13 27 SI VSUB_CONT 14 26 XSCK SHT 15 CD-606 LCD BACK LIGHT 25 XVD (FLASH) CCD IMAGER (Included in the LCD901) REG_GND 1624 XHD FLEXIBLE (6M) H1B 17 23 DCK XE_A(H) LND906 BOARD

E HN-015 HARNESS H2B 1822 D5 TRIGGER LND908

H1A 19 21 D4 XE_K(L) LND907 H2A 20 20 D3 REG_GND 21 19 D2 V6 22 LCD901 18 D1 2.0 INCH VHLD 23 COLOR DIGITAL LCD PANEL 17 D0 V5B 24 16 N.C. (CAPACITOR) V5A 25 15 N.C.

F V4 2614 VBC

MAIN CON+ LND904 VST 27 13 VSH C9001 MAIN CON- LND905 V3B 28 12 COMDC V3A 29 11 VDD V2 30 10 VGH V1B 31 9 VCC1 V1A 32 8 C2+ TH2 33 7 C2-

G 6 VGL CN401 33P

5 N.C. NC14N.C. NC23COMOUT HALL- 3 2 VVCOM BIAS+ 4 1 VSS SY-145 BOARD HALL+ 5 HN-007 HARNESS (1/8)CAMERA A/D CONV.TIMING GENERATOR BIAS- 6 BL_L LND003

H (2/8)LENS DRIVE

NC 7 HN-006 HARNESS BL_H LND004 (3/8)CAMERA DSP,SYSTEM CONTROL ZM_RST2_VCC 8 (4/8)SUPER AND,FLASH MEMORY,SDRAM PT_E/LED_K2 9 (5/8)ADUIO AMP,MIC,SP (6/8)FLASH DRIVE ZM_SENS_OUT2 10 (7/8)LCD PANEL,CONNECTOR PT_E/LED_K1 11 (8/8)DC/DC CONVERTER ZM_SENS_OUT1 12 HN-009 HARNESS SP901 SP- LND604 ZM_RST1_VCC 13 SPEAKER HN-008 HARNESS SP+ LND603 FOCUS+ 14 SHUTTER- 15

I SHUTTER- 16

SHUTTER+ 17 SHUTTER+ 18 ND- 19 ND- 20 FOCUS- 21 ND+ 22 ND+ 23

J MIC_SIG LND602MIC TH1 24

MIC_GND LND601 GND2 25 ZOOM_A 26 MIC901 MICROPHONE ZOOM_A 27 ZOOM_XA 28 ZOOM_XA 29 ZOOM_XB 30 ZOOM_XB 31

K ZOOM_B 32

ZOOM_B 33

FFC-056 FFC-058

FLEXIBLE FLEXIBLE FLAT CABLE FLAT CABLE

L

CN001 8P RST_VCC 8 OVF_SENS 7 XOVF_RST_LED 6 EMITTER 5 OPTICAL GND 10 VIEW FINDER ZM_OVF_A 4

M VCC 9 UNITZM_OVF_B 3

SCLK 8 ZM_OVF_XA 2 CN002 DATA3 7 ZM_OVF_XB 1 MEMORY INT 6 STICK Duo CONNECTOR DATA2 5 SDIO/DATA0 4 LND401 LND403 DATA1 3 HN-011 HARNESS LND037 LENSV_CLOSE LENSV_CLOSE LENSV_CLOSE BS 2 HN-010 HARNESS LND038 LENSV_OPEN LENSV_OPEN LENSV_OPEN

N GND 1 LND402 LND404

BT001 LITHIUM M001

BATTERY BM-001 BOARD LENS(SECONDARY) BARRIER SW-461 BOARD MOTORCN003 GND 5

USB ID 4 D+ 3 HN-012 HARNESS LND039 XLENSV_OPEN_SENSE XLENSV_OPEN_SENSE LND101 D- 2 HN-013 HARNESS LND040 REG_GND REG_GND LND102

O VCC 1 HN-014 HARNESSLND041 XLENSV_CLOSE_SENSE XLENSV_CLOSE_SENSE LND103

16 LB-117 BOARD 4-1 4-2 FRAME SCHEMATIC DIAGRAM BL_H BL_L CN006 26P 26 GND11GND D+ 2 2 D+ D- 3 3 D- GND44GND VCC55VCC VL_3V66VL_3V REG_GND77REG_GND XACCESS_LED88XACCESS_LED D_3.2V99D_3.2V REG_GND 10 10 REG_GND MS_BS 11 11 MS_BS MS_D1 12 12 MS_D1 MS_D0 13 13 MS_D0 MS_D2 14 14 MS_D2 XMS_IN 15 15 XMS_IN MS_D3 16 16 MS_D3 MS_CLK 17 17 MS_CLK MS_VCC 18 18 MS_VCC REG_GND 19 19 REG_GND MODE_DIAL0 20 20 MODE_DIAL0 KEY_AD1 21 21 KEY_AD1 KEY_AD0 22 22 KEY_AD0 LENSV_CLOSE 23 23 LENSV_CLOSE LND002 LENSV_OPEN 24 24 LENSV_OPEN BATT_GND XLENSV_OPEN_SENSE 25 25 XLENSV_OPEN_SENSE XLENSV_CLOSE_SENSE 26 26 XLENSV_CLOSE_SENSE LND001 BATT_UNREG 9P 9P 10P CN703 10P N.C. 9 9 N.C. XAE_LOCK_LED11XAE_LOCK_LED XAF_LED88XAF_LED XSTRB_LED22XSTRB_LED XAE_LOCK_SW77XAE_LOCK_SW ZM_OVF_XB33ZM_OVF_XB XSHUTTER_SW66XSHUTTER_SW ZM_OVF_XA44ZM_OVF_XA REG_GND55REG_GND ZM_OVF_B55ZM_OVF_B D_3.2V44D_3.2V ZM_OVF_A66ZM_OVF_A XPWR_LED33XPWR_LED EMITTER77EMITTER XPWR_ON22XPWR_ON OVF_SENS88OVF_SENS N.C. 1 1 N.C. RST_VCC99RST_VCC N.C. 10 10 N.C., 4-2. SCHEMATIC DIAGRAMS Link BM-001 BOARD (LENS OPEN/CLOSE MOTOR) RL-063 BOARD (POWER SWITCH) LB-117 BOARD (OPEN/CLOSE SWITCH) SW-461 BOARD (JACK, FUNCTION SW, LITHIUM BATTERY) COMMON NOTE FOR SCHEMATIC DIAGRAMS, 4-2. SCHEMATIC DIAGRAMS 4-2. SCHEMATIC DIAGRAMS

THIS NOTE IS COMMON FOR SCHEMATIC DIAGRAMS

(In addition to this, the necessary note is printed in each block) (For schematic diagrams) 1. Connection • All capacitors are in µF unless otherwise noted. pF : µ

Link Pattern box Color bar chartµF. 50 V or less are not indicated except for electrolytics

and tantalums. Pattern box PTB-450 For PTB-450: J-6082-200-A J-6020-250-A • Chip resistors are 1/10 W unless otherwise noted. or kΩ=1000 Ω, MΩ=1000 kΩ. Small pattern box For PTB-1450: • Caution when replacing chip parts. PTB-1450 J-6082-559-A New parts must be attached after removal of chip. J-6082-557-A Be careful not to heat the minus side of tantalum capacitor, Because it is damaged by the heat. • Some chip part will be indicated as follows. Example C541 L452 L = 1 m (PTB-450) L = 40 cm (PTB-1450) 22U 10UH TA A 2520 Pattern box Front of the lens Kinds of capacitor L Camera Temperature characteristics External dimensions (mm) • Constants of resistors, capacitors, ICs and etc with XX indicate that they are not used. 2. Adjust the distance so that the output waveform of In such cases, the unused circuits may be indicated. Fig. a and the Fig. b can be obtain. • Parts with * differ according to the model/destination. Refer to the mount table for each function. H • All variable and adjustable resistors have characteristic curve B, unless otherwise noted. • Signal name XEDIT → EDIT PB/XREC → PB/REC • 2: non flammable resistor • 5: fusible resistor • C : panel designation • A : B+ LineABA=BBA• B : B– Line Fig. a (Video output terminal output waveform) • J : IN/OUT direction of (+,–) B LINE. • C : adjustment for repair. • Circled numbers refer to waveforms. (Measuring conditions voltage and waveform) Electronic beam • Voltages and waveforms are measured between the scanning frame measurement points and ground when camera shoots CRT picture frame color bar chart of pattern box. They are reference values and reference waveforms. (VOM of DC 10 MΩ input impedance is used) • Voltage values change depending upon input Fig.b (Picture on monitor TV) impedance of VOM used.) When indicating parts by reference number, please

Precautions for Replacement of imager include the board name.

• If the imager has been replaced, carry out all the Note : Note : adjustments for the camera section. The components identified by Les composants identifiés par • As the imager may be damaged by static electricity from mark 0 or dotted line with mark une marque 0 sont critiques 0 are critical for safety. pour la sécurité. its structure, handle it carefully like for the MOS IC. Replace only with part number Ne les remplacer que par une In addition, ensure that the receiver is not covered with specified. pièce portant le numéro spécifié. dusts nor exposed to strong light. 4-3 Yellow Cyan Green White Magenta Red Blue, 4-2. SCHEMATIC DIAGRAMS1234512345

BM-001 BOARD RL-063 BOARD A LENS OPEN/CLOSW MOTOR POWER SWITCH A XX MARK:NO MOUNT XX MARK:NO MOUNT 2 1S202 POWER

4 3 9P HN-011 HARNESS LND401 LND403 M001 N.C. 1 TO LENSV_CLOSE LENSV_CLOSE + SW-461 HN-010 HARNESS LND402 LND404 LENS XPWR_ON 2 D201 BOARD LENSV_OPEN LENSV_OPEN M BARRIER SML-412MWT86 (PAGE 4-7) – MOTOR XPWR_LED 3TO POWER SY-145 D_3.2V 4 BOARD(7/8)

B B THROUGH REG_GND 5

THE FFC-057 XSHUTTER_SW 6 FLEXIBLE65FLAT CABLE XAE_LOCK_SW 7 S201 16 (PAGE 4-21 XAF_LED 8 SHUTTER42of LEVEL3) N.C. 913LED901 (AFLED) LND208 XAF_LED

C D_3.2V

LND209123416

LB-117 BOARD A OPEN/CLOSE SWITCH XX MARK:NO MOUNT

S101 S102 LENS BARRIER LENS BARRIER 3P OPEN CLOSE HN-012 HARNESS LND101 TO XLENSV_OPEN_SENS 1 SW-461 HN-013 HARNESS LND102 BOARD REG_GND 2 HN-014 HARNESS LND103 (PAGE 4-7) XLENSV_CLOSE_SENS 3

B

4-5 4-6 BM-001/LB-117/RL-063, • Refer to page 4-3 for mark 0. 12345678910

SW-461 BOARD JACK,FUNCTION SW,LITHIUM BATTERY 5P

5 GND CN003

A XX MARK:NO MOUNT 4 ID USB

243D+ 132D- CN006 26P LF001 1 VCC 0uH GND 1 D+ 2 R012 1k LND045 STATIC_GND D- 3 GND 4 LND043 STATIC_GND

B VCC 5 R015

R001 33 BT001 XX VL_3V 6 (LITHIUM BATTERY) (SECONDARY) D007 REG_GND 7 XX XACCESS_LED 8 STATIC_GND LND042 D_3.2V 9 10P REG_GND 10 1 GND STATIC_GND LND044 MS_BS 11 2 BS FB001 0uH TO MS_D1 12 3 DATA1

C SY-145 FB002 0uHBOARD(7/8) MS_D0 13 4 SDIO/DATA0 CN002

FB003 0uH

THROUGH

THE FFC-056 MS_D2 14 R008 5 DATA21k MEMORY FLEXIBLE XMS_IN 15 6 INT STICK Duo FLAT CABLE FB004 0uH CONNECTOR (PAGE 4-21 MS_D3 16 7 DATA3 of LEVEL3) MS_CLK 17 FB005 0uH C001 8 SCLK0.1u MS_VCC 18B9VCC REG_GND 19 10 GND MODE_DIAL0 20

D KEY_AD1 21

KEY_AD0 22 S001 S004 S007 S009 S011 LENSV_CLOSE 23 DOWN RIGTH DISPLAY DUST PLAY-STILL-MOVIE433443LENSV_OPEN 2434RB00112XLENSV_OPEN_SENSE 25 S002 2200x42 1 S005122S008 1 S0108 7 RB0027816XLENSV_CLOSE_SENSE 26 4 UP33LEFT 4 MENU4 3 2200x4 ZOOM WIDE87343221211212

E 2 S003112

S006 RB003 4 SET 3 ZOOM TELE212200x41432P TO HN-011 HARNESS LND03721BM-001 LENSV_CLOSE 1 BOARD HN-010 HARNESS LND03821LENSV_OPEN 2 (PAGE 4-5) D005 D006 6.8B XX R007 1k 3P HN-012 HARNESS LND039 TO XLENSV_OPEN_SENSE 1F HN-013 HARNESS LND040 FB006 0uHLB-117 REG_GND 2 BOARD HN-014 HARNESS LND041 FB007 (PAGE 4-5) XLENSV_CLOSE_SENSE 3 0uH C002 C003 C004 10P XX 0.01u XX OPTICAL VIEWFINDER UNIT is replaced as a block. B So that there PRINTED WIRING BOARD and XAE_LOCK_LED 1 SCHEMATIC DIAGRAM are omitted. XSTRB_LED 2 CN001 8P TO ZM_OVF_XB31ZM_OVF_XB SY-145 BOARD(7/8) ZM_OVF_XA42ZM_OVF_XA CN703

G ZM_OVF_B53ZM_OVF_B THROUGH

THE FFC-058 ZM_OVF_A64ZM_OVF_A OPTICAL FLEXIBLE VIEWFINDER FLAT CABLE EMITTER75EMITTER UNIT (PAGE 4-21 OVF_SENS86XOVF_RST_LED of LEVEL3) RST_VCC97OVF_SENS N.C. 10 8 RST_VCC Schematic diagram of the SY-145 board is not shown. 16 R009 1500 Pages from 4-9 to 4-24 are not shown. 4-7 4-8 SW-461 D001 SML-310YTT86 (FLASH) D002 SML-510MWT86S (AELOCK) D003 SML-512UWT86 (ACCESS) D004 MAZW068H0LS0, 4-3. PRINTED WIRING BOARDS Link BM-001 BOARD RL-063 BOARD LB-117 BOARD SW-461 BOARD COMMON NOTE FOR PRINTED WIRING BOARDS MOUNTED PARTS LOCATION, 4-3. PRINTED WIRING BOARDS 4-3. PRINTED WIRING BOARDS THIS NOTE IS COMMON FOR WIRING BOARDS (In addition to this, the necessary note is printed in each block) (For printed wiring boards) • : Uses unleaded solder. • Chip parts. • : Pattern from the side which enables seeing. Transistor Diode (The other layers’ patterns are not indicated) C6544565445333123• Through hole is omitted. • Circled numbers refer to waveforms. BE123321123321212121654• There are a few cases that the part printed on diagram12213412344334isn’t mounted in this model. • C: panel designation54334521432112214645313121 3 4-25, 4-3. PRINTED WIRING BOARDS BM-001 (2 layers), LB-117 (2 layers), RL-063 (2 layers) • : Uses unleaded solder.

BM-001 BOARD RL-063 BOARD

S201 M001 S202 LND403 M (LENS BARRIER) 541311-867-293- LND404AKLND401 LND40291D2013 2 11 (POWER) 4 26 SHUTTER POWER 11 1-868-243- FFC-057 LED901 (AF LED)

LB-117 BOARD

S1 201 S10 LENS BARRIER

OPEN

LENS BARRIER CLOSE 11 1-867-722- 4-27 4-28 BM-001/LB-117/RL-063 LND101 LND102 LND103 LND209 LND208,

SW-461 (2 layers) • : Uses unleaded solder. SW-461 BOARD(SIDE A)

MOVIE-STILL-PLAY CN006 10 26 1 S0119617FB004 FB003 FB001 FB005 R008 FB002 R001 C001

CAUTION :

10 1 Danger of explosion if battery is incorrectly replaced.

Replace only with the same or equivalent type.

+ – FB006

A

BT001 CN002 LITHIUM BATTERY (SECONDARY) MEMORY STICK Duo

CONNECTOR

LND045 (USB)

B 11

1 10 LND044 1-867-292- 11 FFC-058

SW-461 BOARD(SIDE B) C

R007 R01524DUST S001 DISPLAY13

DOWN

2 4 S0031334RIGHT SET LEFT LF0011 2

D UP FB007

MENU 1-867-292- D006 RB0022871111782RB003 D007

Printed wiring board of the SY-145 board is not shown. Pages from 4-31 to 4-34 are not shown.

2 4 ZOOM24D001

E TELE ZOOM (FLASH)S006 S010 WIDE A K

1 3 LND04213D002 Waveforms of the SY-145 board is not shown.(AE LOCK) A K Page 4-35 is not shown. 16123454-29 4-30 SW-46124AKS009 D003 (ACCESS) 3113S0043242D004 D005124S002132817RB00124S005311331S008 S0074242C004 C003 R009 C002 R012 LND037 LND043 LND0381518CN003 LND041 LND039 CN001 LND040 7, 4-3. PRINTED WIRING BOARDS 4-5. MOUNTED PARTS LOCATION no mark : side A * mark : side B SW-461 BOARD BT001 A-3 C001 A-1 C002 B-5 C003 A-4 C004 A-4 CN001 A-5 CN002 A-1 CN003 B-5 CN006 A-1 * D001 E-4 * D002 E-4 * D003 D-1 * D004 D-1 * D005 D-1 * D006 D-1 * D007 D-1 FB001 A-2 FB002 A-1 FB003 A-1 FB004 A-1 FB005 A-1 FB006 A-4 * FB007 D-5 * LF001 D-5 * LND037 D-5 * LND038 D-5 * LND039 D-5 * LND040 D-5 * LND041 D-5 * LND042 E-1 * LND043 C-5 LND044 B-1 LND045 B-5 R001 A-2 * R007 C-2 R008 A-1 R009 B-5 * R012 D-5 * R015 C-2 * RB001 D-2 * RB002 D-1 * RB003 D-1 * S001 C-1 * S002 D-1 * S003 D-1 * S004 D-1 * S005 D-2 * S006 E-1 * S007 C-2 * S008 D-2 * S009 C-1 * S010 E-2

Mounted parts location of the SY-145 board is not shown. Page 4-37 is not shown.

4-36E SW-461,

NOTE

5. REPAIR PARTS LIST NOTE: Characters A to Z of the electrical parts list indicate location of exploded views in which the desired part is shown.

Link EXPLODED VIEWS

SY-145

B

ACDEOVERALL SECTION BATTERY HOLDERSECTION

Link ELECTRICAL PARTS LIST ACCESSORIES

BM-001 BOARD A RL-063 BOARD B SY-145 BOARD C LB-117 BOARD D SW-461 BOARD E, 5. REPAIR PARTS LIST 5. REPAIR PARTS LIST NOTE: • -XX, -X mean standardized parts, so they may have some differences from When indicating parts by reference number, the original one. please include the board name. • Items marked “*” are not stocked since they are seldom required for routine service. Some delay should be anticipated when ordering these items. The components identified by mark 0 or • The mechanical parts with no reference number in the exploded views are not dotted line with mark 0 are critical for safety. supplied. Replace only with part number specified. • Due to standardization, replacements in the parts list may be different from Les composants identifiés par une marque the parts specified in the diagrams or the components used on the set. 0 sont critiques pour la sécurité. • CAPACITORS: Ne les remplacer que par une pièce portant µ le numéro spécifié.uF: F • COILS uH: µH • RESISTORS All resistors are in ohms. CAUTION1 : METAL: metal-film resistor For the part of 51: TAPE, FFC FIXED (2-662-566-01) , cut WOVEN (T0.25), METAL OXIDE: Metal Oxide-film resistor FABRIC NON (3-706-631-01) into the desired length and use it. F: nonflammable • SEMICONDUCTORS CAUTION2 : For the part of 58: TAPE, MOUNT PARTS FIXED (2-660-553-01) , In each case, u: µ, for example: cut SHEET, ADHESIVE (2-649-300-01) into the desired length and use it. uA...: µA... , uPA... , µPA... , uPB... , µPB... , uPC... , µPC... , CAUTION3 : uPD..., µPD... For the part of 68: HARNESS (HN-008) (1-963-980-11) and 71: HARNESS (HN-006) (1-963-978-11), cut HARNESS (HN-010) (1-964-232-11) into the desired length and use it. CAUTION4 : For the part of 69: HARNESS (HN-009) (1-963-981-11) and 70: HARNESS (HN-007) (1-963-979-11), cut HARNESS (HN-011) (1-964-233-11) into the desired length and use it.

Language that can be selected about SY-145 board US GP2 CND AUSzzzzzz Vietnam AEP GP3zzzzzzzzzzzzzzz UK E BR GP4 HKzzzzzzzzz CH KR

• Abbreviation AR : Argentine model AUS : Australian model BR : Brazilian model CH : Chinese model CND : Canadian model EE : East European model HK : Hong Kong model J : Japanese model JE : Tourist model KR : Korea model NE : North European model RU : Russian model 5-1

Area English French German Spanish Italian Portuguese Simplified Chinese Traditional Chinese Arabic Korean Russian Dutch Thai Persian Swedish Norwegian Danish Finnish Polish Czech Hungarian

, 5. REPAIR PARTS LIST 5-1. EXPLODED VIEWS 5-1-1. OVERALL SECTION ns : not supplied 156813 D M001 14 C 12 ns E ns A 1085

B C B

ns

SY-14 D5

E 1

A

Battery holder section 1 (See page 5-4) Ref. No. Part No. Description Ref. No. Part No. Description 1 2-599-475-31 SCREW (M1.7) 9 A-1156-110-A LB-117 BOARD, COMPLETE 2 2-660-555-01 COVER, USB 10 1-964-236-11 HARNESS (HN-014)(WHITE) 3 X-2103-127-1 CABINET (REAR) ASSY 11 1-964-235-11 HARNESS (HN-013)(GRAY) 4 2-660-525-01 SHEET, LCD COVER ADHESIVE 12 1-964-234-11 HARNESS (HN-012)(YELLOW) 5 2-660-556-01 COVER, LCD 13 A-1159-170-A BM-001 BOARD, COMPLETE 6 X-2103-126-1 CABINET (FRONT) ASSY 14 1-964-232-11 HARNESS (HN-010)(RED) 7 2-660-502-01 SCREW, TRIPOD 15 1-964-233-11 HARNESS (HN-011)(BLACK) 8 3-080-204-11 SCREW, TAPPING, P2 M001 1-763-818-51 DC MOTOR 8C-036G55 5-3, 5. REPAIR PARTS LIST 5-1-2. BATTERY HOLDER SECTION MIC901 ns : not supplied 52 64 D 66 (15mm × 5mm) 67 78 55 A C9001 54GC68 E (24mm : RED) ns 51 (15mm × 5mm) 61 62 60 58 69 (5.5mm × 5.5mm) (24mm : BLACK)

D

X001

SY 59 SP901-14 725 56 H 70

E (39mm : BLACK)

F

LCD901 75 (39mm : RED) FBBA77 57 C BT001 (5.5mm × 5.5mm) 60 : BT001 (Lithium battery) SW-461 board on the mount position. (See page 4-29) ns CAUTION : Danger of explosion if battery is incorrectly 76 replaced. G H • Refer to page 5-1 for mark 0. Replace only with the same or equivalent type. Ref. No. Part No. Description Ref. No. Part No. Description 51 Refar to page 5-1 CAUTION1 68 Refar to page 5-1 CAUTION3 52 A-1156-105-A SY-145 BOARD, COMPLETE (SERVICE) (GP2) 69 Refar to page 5-1 CAUTION4 52 A-1156-106-A SY-145 BOARD, COMPLETE (SERVICE) (GP3) 70 Refar to page 5-1 CAUTION4 52 A-1156-107-A SY-145 BOARD, COMPLETE (SERVICE) (GP4) 71 Refar to page 5-1 CAUTION3 53 1-830-730-11 FLEXIBLE FLAT CABLE (FFC-056) * 72 2-660-551-01 HOLDER, SP 54 1-830-731-11 FLEXIBLE FLAT CABLE (FFC-057) * 73 2-660-549-01 FRAME, LCD 55 A-1156-109-A RL-063 BOARD, COMPLETE 74 2-633-989-01 GASKET (MS) * 56 2-670-904-01 SHEET (CCD), RADIATION 75 A-1179-454-A SW-461 BOARD, COMPLE (SERVICE) 57 A-1156-857-A LENS BLOCK ASSY (951A (C1)) 76 1-830-732-11 FLEXIBLE FLAT CABLE (FFC-058) 58 Refar to page 5-1 CAUTION2 * 77 2-670-905-01 SHEET (CON), RADIATION 59 1-788-228-12 UNIT, OPTICAL (G177) * 78 2-668-809-01 SHEET (FFC), RADIATION 60 3-080-204-11 SCREW, TAPPING, P2 0BT001 1-756-539-21 BATTERY, LITHIUM SECONDARY 061 1-479-571-11 FLASH UNIT 0C9001 1-112-767-11 CAP, ELECT 180MF (330V) 62 1-964-308-11 HARNESS (HN-015) LCD901 1-805-997-11 INDICATORMODULE, LIQUIDCRYSTAL 64 X-2103-128-1 CABINET (UPPER) ASSY MIC901 1-542-676-11 MICROPHONE 65 2-599-475-31 SCREW (M1.7) SP901 1-826-347-11 SPEAKER (1.6CM) * 66 2-660-550-01 HOLDER, MICROPHONE X001 1-760-840-11 VIBRATOR, CRYSTAL (32.768kHz) 67 X-2103-129-1 HOLDER ASSY, BT 5-4, 5. REPAIR PARTS LIST Checking supplied accessories. Make sure that the following accessories are supplied with your camcorder. R6 (size AA) alkaline batteries (2) USB cable (1) Wrist strap (1) (not supplied) (Except BR model) (Except BR model) 1-827-038-11 2-050-981-01

Other accessories

2-666-673-01 CD-ROM (CYBER-SHOT APPLICATION SOFTWARE) (EXCEPT BR) 2-658-423-11 INSTRUCTION (READ THIS FIRST) (ENGLISH)(EXCEPT CH,KR,BR) 2-658-423-21 INSTRUCTION (READ THIS FIRST) (FRENCH/ITALIAN)(CND,AEP) 2-658-423-31 INSTRUCTION (READ THIS FIRST) (SPANISH/PORTUGUESE)(AEP,E) 2-658-423-41 INSTRUCTION (READ THIS FIRST) (GERMAN/DUTCH)(AEP) 2-658-423-51 INSTRUCTION (READ THIS FIRST) (TRADITIONAL CHINESE/SIMPLIFIED CHINESE)(E,HK,CH) 2-658-423-61 INSTRUCTION (READ THIS FIRST) (RUSSIAN)(AEP) 2-658-423-71 INSTRUCTION (READ THIS FIRST) (ARABIC/PERSIAN)(E) 2-658-423-81 INSTRUCTION (READ THIS FIRST) (KOREAN)(KR) 2-658-423-91 INSTRUCTION (READ THIS FIRST) (CZECH/POLISH)(AEP) 2-658-424-11 INSTRUCTION (READ THIS FIRST) (HUNGARIAN/SLOVAKIAN)(AEP) 2-658-424-21 INSTRUCTION (READ THIS FIRST) (SWEDISH/FINNISH)(AEP) 2-658-424-31 INSTRUCTION (READ THIS FIRST) (NORWEGIAN/DANISH)(AEP) 2-658-425-11 INSTRUCTION (USER’S GUIDE) (ENGLISH)(EXCEPT CH,KR,BR) 2-658-425-21 INSTRUCTION (USER’S GUIDE) (FRENCH/ITALIAN)(CND,AEP) 2-658-425-31 INSTRUCTION (USER’S GUIDE) (SPANISH/PORTUGUESE)(AEP,E) 2-658-425-41 INSTRUCTION (USER’S GUIDE) (GERMAN/DUTCH)(AEP) 2-658-425-51 INSTRUCTION (USER’S GUIDE) (TRADITIONAL CHINESE/SIMPLIFIED CHINESE)(E,HK,CH) 2-658-425-61 INSTRUCTION (USER’S GUIDE) (RUSSIAN)(AEP) 2-658-425-71 INSTRUCTION (USER’S GUIDE) (ARABIC/PERSIAN)(E) 2-658-425-81 INSTRUCTION (USER’S GUIDE) (KOREAN)(KR) 2-658-425-91 INSTRUCTION (USER’S GUIDE) (POLISH/CZECH)(AEP) 2-658-426-11 INSTRUCTION (USER’S GUIDE) (HUNGARIAN/SLOVAKIAN)(AEP) 2-658-426-21 INSTRUCTION (USER’S GUIDE) (SWEDISH/FINNISH)(AEP) 2-658-426-31 INSTRUCTION (USER’S GUIDE) (NORWEGIAN/DANISH)(AEP) 5-5,

BM-001 LB-117 RL-063 SW-461 SY-145

5-2. ELECTRICAL PARTS LIST Ref. No. Part No. Description Ref. No. Part No. Description A-1159-170-A BM-001 BOARD, COMPLETE FB006 1-400-331-11 FERRITE, EMI (SMD) (1005) *********************** FB007 1-400-331-11 FERRITE, EMI (SMD) (1005) ************************************************************ < LINE FILTER > A-1156-110-A LB-117 BOARD, COMPLETE ********************** LF001 1-456-583-11 COMMON MODE CHOKE COIL < SWITCH > < RESISTOR > * S101 1-786-480-41 SWITCH, PUSH (1 KEY) (OPEN) R001 1-218-935-11 RES-CHIP 33 5% 1/16W * S102 1-786-545-41 SWITCH, PUSH LEVER (S) (CLOSE) R007 1-218-953-11 RES-CHIP 1K 5% 1/16W ************************************************************ R008 1-218-953-11 RES-CHIP 1K 5% 1/16W R009 1-218-955-11 RES-CHIP 1.5K 5% 1/16W A-1156-109-A RL-063 BOARD, COMPLETE R012 1-218-953-11 RES-CHIP 1K 5% 1/16W ********************** < COMPOSITION CIRCUIT BLOCK > < DIODE > RB001 1-234-376-11 RES, NETWORK 2.2K (1005X4) D201 6-501-030-01 DIODE SML-412MWT86 (POWER) RB002 1-234-376-11 RES, NETWORK 2.2K (1005X4) LED901 6-500-505-01 DIODE OPY5052 (AF) RB003 1-234-376-11 RES, NETWORK 2.2K (1005X4) < SWITCH > < SWITCH > * S201 1-786-912-21 TACTILE SWITCH (SHUTTER) S001 1-786-885-21 SWITCH, TACTILE (DOWN) S202 1-786-885-21 SWITCH, TACTILE (POWER) S002 1-786-885-21 SWITCH, TACTILE (UP) ************************************************************ S003 1-786-885-21 SWITCH, TACTILE (SET) S004 1-786-885-21 SWITCH, TACTILE (RIGHT) A-1179-454-A SW-461 BOARD, COMPLETE (SERVICE) S005 1-786-885-21 SWITCH, TACTILE (LEFT) ******************************** S006 1-786-885-21 SWITCH, TACTILE (ZOOM T) 1-830-732-11 FLEXIBLE FLAT CABLE (FFC-058) S007 1-786-885-21 SWITCH, TACTILE (DISPLAY) 0BT001 1-756-539-21 BATTERY, LITHIUM SECONDARY S008 1-786-885-21 SWITCH, TACTILE (MENU) S009 1-786-885-21 SWITCH, TACTILE (DUST) not supplied SW-461 BOARD, COMPLETE S010 1-786-885-21 SWITCH, TACTILE (ZOOM W) *********************** (SW-461 board is included in the COMPLETE of * S011 1-786-947-11 SIGNAL SELECTOR SWITCH SW-461 board (SERVICE).) (MOVIE/STILL/PLAY) ************************************************************ < CAPACITOR > SY-145 BOARD, COMPLETE C001 1-125-777-11 CERAMIC CHIP 0.1uF 10% 10V ********************** C003 1-164-943-81 CERAMIC CHIP 0.01uF 10% 16V ************************************************************ < CONNECTOR >

Electrical parts list of the SY-145 board is not

* CN001 1-766-644-51 CONNECTOR, FFC/FPC 8P shown. CN002 1-817-827-11 MEMORY STICK DUO CONNECTOR CN003 1-794-962-11 CONNECTOR, SQUARE TYPE (USB 5P) (USB) Pages from 5-7 to 5-10 are not shown. * CN006 1-818-087-51 CONNECTOR, FFC/FPC (LIF) 26P < DIODE > D001 8-719-077-34 DIODE SML-310YTT86 (FLASH) D002 8-719-075-29 DIODE SML-510MWT86S (AE LOCK) D003 6-500-817-01 DIODE SML-512UWT86 (ACCESS) D004 6-500-776-01 DIODE MAZW068H0LS0 D005 8-719-056-54 DIODE MAZS068008SO < FERRITE BEAD > * FB001 1-481-021-21 INDUCTOR, FERRITE BEAD (1005) * FB002 1-481-021-21 INDUCTOR, FERRITE BEAD (1005) * FB003 1-481-021-21 INDUCTOR, FERRITE BEAD (1005) * FB004 1-481-021-21 INDUCTOR, FERRITE BEAD (1005) FB005 1-400-331-11 FERRITE, EMI (SMD) (1005) • Refer to page 5-1 for mark 0. 5-6E, [Description of main button functions on toolbar of the Adobe Acrobat Reader Ver5.0 (for Windows)] Toolbar Printing a text Reversing the screens displayed once 1. Click the Print button . • To reverse the previous screens (operation) one by one, click 2. Specify a printer, print range, number of copies, and other op- the . tions, and then click [OK]. • To advance the reversed screens (operation) one by one, click the . Application of printing: To set a range to be printed within a page, select the graphic Application to the Service Manual: selection tool and drag on the page to enclose a range to This function allows you to go and back between circuit dia- be printed, and then click the Print button. gram and printed circuit board diagram, and accordingly it will be convenient for the voltage check. Finding a text 1. Click the Find button . Moving with link 2. Enter a character string to be found into a text box, and click the [Find]. (Specify the find options as necessary) 1. Select either palm tool , zoom tool , text selection tool , or graphic selection tool . Application to the Service Manual: 2. Place the pointer in the position in a text where the link exists To execute “find” from current page toward the previous pages, (such as a button on cover and the table of contents page, or select the check box “Find Backward” and then click the blue characters on the removal flowchart page or drawing “Find”. page), and the pointer will change to the forefinger form . 3. Then, click the link. (You will go to the link destination.) Moving with bookmark: Click an item (text) on the bookmark pallet, and you can move to the link destination. Also, clicking can display the hidden items. (To go back to original state, click ) 3. Open the find dialog box again, and click the [Find Again] and you can find the matched character strings displayed next. (Character strings entered previously are displayed as they are in the text box.) Application to the Service Manual: The parts on the drawing pages (block diagrams, circuit dia- grams, printed circuit boards) and parts list pages in a text can be found using this find function. For example, find a Ref. No. of IC on the block diagram, and click the [Find Again] continuously, so that you can move to the Ref. No. of IC on Zooming or rotating the screen display the circuit diagram or printed circuit board diagram succes- “Zoom in/out” sively. • Click the triangle button in the zoom control box to select the Note: The find function may not be applied to the Service display magnification. Or, you may click or for zoom- Manual depending on the date of issue. ing in or out. Switching a page • To move to the first page, click the . • To move to the last page, click the . “Rotate” • To move to the previous page, click the . • Click rotate tool , and the page then rotates 90 degrees each. • To move to the next page, click the . Application to the Service Manual: The printed circuit board diagram you see now can be changed to the same direction as the set.,

Reverse 987692231.pdf Revision History

Ver. Date History Contents S.M. Rev. issued 1.0 2005.12 Official Release — —]
15

Similar documents

SAFETY CHECK-OUT
DSC-S600 SERVICE MANUAL LEVEL 3 US Model Ver. 1.1 2006. 07 Canadian Model Revision History AEP Model UK Model How to use E Model Acrobat Reader Australian Model Chinese Model Internal memory Brazilian Model ON BOARD Hong Kong Model Korea Model Link SERVICE NOTE SCHEMATIC DIAGRAMS REPAIR PARTS LIST F
These specifications are extracted from instruction
DSC-S600 SERVICE MANUAL LEVEL 1 US Model Ver 1.0 2005. 12 Canadian Model Revision History AEP Model UK Model E Model Australian Model Chinese Model Brazilian Model Hong Kong Model Korea Model Link SPECIFICATIONS ACCESSORIES SELF-DIAGNOSIS FUNCTION INSTRUCTION MANUAL Note : Note : The components iden
SPECIFICATIONS Camera [Power, general] Cyber-shot Station CSS-SA
DSC-S60/S80/S90/ST80 SERVICE MANUAL LEVEL 1 DSC-S60/S90 Ver 1.1 2005.07 US Model Canadian Model Revision History Chinese Model Tourist Model DSC-S60/S80/S90/ ST80 AEP Model UK Model E Model Hong Kong Model DSC-S60/S80/S90 Australian Model Korea Model DSC-S90 Photo: DSC-S90/Silver Argentine Model Lin
SPECIFICATIONS Camera [Power, general] Cyber-shot Station CSS-SA
DSC-S60/S80/S90/ST80 SERVICE MANUAL LEVEL 2 DSC-S60/S90 Ver 1.0 2005.03 US Model Canadian Model Revision History Chinese Model Tourist Model DSC-S60/S80/S90/ How to use Acrobat Reader ST80 AEP Model UK Model E Model Hong Kong Model DSC-S60/S80/S90 Australian Model Korea Model DSC-S90 Photo: DSC-S90/
SPECIFICATIONS Camera [Power, general] Cyber-shot Station CSS-SA
DSC-S60/S80/S90/ST80 SERVICE MANUAL LEVEL 2 DSC-S60/S90 Ver 1.1 2005.07 US Model Canadian Model Revision History Chinese Model Tourist Model DSC-S60/S80/S90/ How to use Acrobat Reader ST80 AEP Model UK Model E Model Hong Kong Model DSC-S60/S80/S90 Australian Model Korea Model DSC-S90 Photo: DSC-S90/
Supplied accessories
DSC-S70 SERVICE MANUAL US Model Canadian Model Level 2 Ver. 1.2 2001.07 AEP Model UK Model E model Hong Kong Model Australian Model Chinese Model Korea Model Tourist Model Japanese Model This service manual contains information for Japanese model as well. On the SY-58 board SY-58 board This service
SAFETY-RELATED COMPONENT WARNING!!
DSC-S75 SERVICE MANUAL AEP Model UK Model Level 1 Ver 1.2 2001. 11 SPECIFICATIONS System Flash General AC-L10A/B/C Accessories Image device Recommended recording Used battery pack AC power adaptor A/V connecting cable (1) 8.93 mm (1/1.8 type) color distance (ISO is set to AUTO): NP-FM50 Power requir
Supplied accessories
DSC-S70 SERVICE MANUAL US Model Canadian Model Level 2 Ver. 1.3 2002.09 AEP Model UK Model E model Hong Kong Model Australian Model Chinese Model Korea Model Tourist Model Japanese Model This service manual contains information for Japanese model as well. On the SY-58 board SY-58 board This service
SPECIFICATIONS System Output connector General AC-L10A/B/C NP-FM50 battery pack
DSC-S85 SERVICE MANUAL US Model Canadian Model Level 2 AEP Model UK Model E Model Ver 1.1 2001. 08 Hong Kong Model Australian Model Chinese Model Korea Model Tourist Model Japanese Model Differences Manual This Service Manual covers only differences from DSC-S75 (Level 2). In performing repair, refe
SPECIFICATIONS System Output connector General AC-L10A/B/C NP-FM50 battery pack
DSC-S85 SERVICE MANUAL US Model Canadian Model Level 2 AEP Model UK Model E Model Ver 1.1 2001. 08 Hong Kong Model Australian Model Chinese Model Korea Model Tourist Model Japanese Model Differences Manual This Service Manual covers only differences from DSC-S75 (Level 2). In performing repair, refe
SAFETY-RELATED COMPONENT WARNING!! ATTENTION AU COMPOSANT AYANT RAPPORT
DSC-S75 SERVICE MANUAL US Model Canadian Model Level 2 AEP Model UK Model E Model Ver 1.2 2001. 08 Hong Kong Model Australian Model Chinese Model Korea Model Tourist Model Japanese Model This service manual contains information for Japanese model as well. On the SY-68 board SY-68 board This service
DSC-T1 SERVICE MANUAL LEVEL 2 US Model Canadian Model UK Model Hong Kong Model Australian Model Korea Model Chinese Model Tourist Model Japanese Model
DSC-T1 SERVICE MANUAL LEVEL 2 US Model Ver 1.0 2003. 10 Canadian Model Revision History AEP Model UK Model How to use E Model Acrobat Reader Hong Kong Model Australian Model Korea Model Chinese Model Tourist Model Japanese Model Link SPECIFICATIONS BLOCK DIAGRAMS PRINTED WIRING BOARDS SERVICE NOTE F
DSC-T1 SERVICE MANUAL LEVEL 2 US Model Canadian Model UK Model Hong Kong Model Australian Model Korea Model Chinese Model Tourist Model Japanese Model
DSC-T1 SERVICE MANUAL LEVEL 2 US Model Ver 1.1 2004. 03 Canadian Model Revision History AEP Model UK Model How to use E Model Acrobat Reader Hong Kong Model Australian Model Korea Model Chinese Model Tourist Model Japanese Model Link SPECIFICATIONS BLOCK DIAGRAMS PRINTED WIRING BOARDS SERVICE NOTE F
DSC-T1 SERVICE MANUAL LEVEL 1 US Model Ver 1.2 2004. 03 Canadian Model UK Model E Model Hong Kong Model Australian Model Korea Model Chinese Model Tourist Model
DSC-T1 SERVICE MANUAL LEVEL 1 US Model Ver 1.2 2004. 03 Canadian Model Revision History AEP Model UK Model E Model Hong Kong Model Australian Model Korea Model Chinese Model Tourist Model Japanese Model Link SPECIFICATIONS SELF DIAGNOSIS FUNCTION • INSTRUCTION MANUAL is shown at the end of this docu
• Change of Automatic Adjustment Program • Change of Message for Destination Data
DSC-T100 Auto-ADJ SERVICE MANUAL Ver. 1.1 2007.04 SUPPLEMENT-1 File this supplement with the service manual. (DI07-003) • Change of Automatic Adjustment Program • Change of Message for Destination Data Write • Addition of [Read], [Save], and [Load] buttons to Angular Velocity Sensitivity Adjustment
CAUTION Danger of explosion if battery is incorrectly replaced.
DSC-T10 SERVICE MANUAL LEVEL 3 US Model Ver 1.1 2006.09 Canadian Model Revision History AEP Model UK Model How to use E Model Acrobat Reader Australian Model Hong Kong Model Chinese Model Internal memory Korea Model ON BOARD Argentine Model Brazilian Model Japanese Model Photo: Silver Tourist Model
SPECIFICATIONS Camera [Input and Output connectors] BC-CS3 battery charger
DSC-T10 SERVICE MANUAL LEVEL 2 US Model Ver 1.0 2006.07 Canadian Model Revision History AEP Model UK Model How to use E Model Acrobat Reader Australian Model Hong Kong Model Chinese Model Internal memory ON BOARD Korea Model Argentine Model Japanese Model Tourist Model Photo: Silver Link SPECIFICATI
SPECIFICATIONS Camera [Input and Output connectors] BC-CSG/BC-CSGB/BC-CSGC
DSC-T100 SERVICE MANUAL LEVEL 2 US Model Ver. 1.0 2007.02 Canadian Model Revision History AEP Model UK Model How to use E Model Acrobat Reader Australian Model Hong Kong Model Chinese Model Internal memory Korea Model ON BOARD Brazilian Model Japanese Model Tourist Model Photo: Silver Link SPECIFICA
WARNING To prevent fire or shock hazard, do
DSC-T11 SERVICE MANUAL LEVEL 1 Differences Manual DSC-T11 AEP Model UK Model E Model Ver 1.1 2004. 09 Hong Kong Model Australian Model Revision History Korea Model Chinese Model Tourist Model Japanese Model • This Service Manual shows only the difference from DSC-T1. Refer to the Service Manual Leve
WARNING To prevent fire or shock hazard, do
DSC-T11 SERVICE MANUAL LEVEL 1 Differences Manual DSC-T11 AEP Model UK Model E Model Ver 1.0 2004. 04 Hong Kong Model Australian Model Revision History Korea Model Chinese Model Tourist Model Japanese Model • This Service Manual shows only the difference from DSC-T1. Refer to the Service Manual Leve
SPECIFICATIONS Camera [Input and Output connectors] BC-CSG/BC-CSGB/BC-CSGC
DSC-T20/T25 SERVICE MANUAL LEVEL 2 US Model Ver 1.0 2007.03 Canadian Model Revision History AEP Model UK Model How to use E Model Acrobat Reader Australian Model Hong Kong Model Chinese Model Internal memory Korea Model ON BOARD Argentine Model Brazillian Model Japanese Model Photo: Silver Tourist M
Model information table
DSC-T20/T25 SERVICE MANUAL LEVEL 3 US Model Ver 1.0 2007.03 Canadian Model Revision History AEP Model UK Model How to use E Model Acrobat Reader Australian Model Hong Kong Model Chinese Model Internal memory Korea Model ON BOARD Argentine Model Brazillian Model Japanese Model Photo: Silver Tourist M
DSC-T3 SERVICE MANUAL LEVEL 2 DSC-T3
DSC-T3 SERVICE MANUAL LEVEL 2 DSC-T3 Ver 1.0 2004. 09 US Model AEP Model Revision History UK Model E Model Hong Kong Model Australian Model How to use Chinese Model Acrobat Reader Japanese Model Korea Model Tourist Model Link SPECIFICATIONS BLOCK DIAGRAMS PRINTED WIRING BOARDS SERVICE NOTE FRAME SCH
DSC-T3 SERVICE MANUAL LEVEL 1 DSC-T3 Ver 1.0 2004. 09 US Model Revision History UK Model Link SPECIFICATIONS ACCESSORIES SELF DIAGNOSIS FUNCTION
DSC-T3 SERVICE MANUAL LEVEL 1 DSC-T3 Ver 1.0 2004. 09 US Model AEP Model Revision History UK Model E Model Hong Kong Model Australian Model Chinese Model Japanese Model Korea Model Tourist Model Link SPECIFICATIONS ACCESSORIES SELF DIAGNOSIS FUNCTION • INSTRUCTION MANUAL is shown at the end of this
DSC-T3 SERVICE MANUAL LEVEL 2 DSC-T3
DSC-T3 SERVICE MANUAL LEVEL 2 DSC-T3 Ver 1.2 2005. 09 US Model AEP Model Revision History UK Model E Model Hong Kong Model Australian Model How to use Chinese Model Acrobat Reader Japanese Model Korea Model Tourist Model Link SPECIFICATIONS BLOCK DIAGRAMS PRINTED WIRING BOARDS SERVICE NOTE FRAME SCH
DSC-T3 SERVICE MANUAL LEVEL 2 DSC-T3
DSC-T3 SERVICE MANUAL LEVEL 2 DSC-T3 Ver 1.1 2005. 04 US Model AEP Model Revision History UK Model E Model Hong Kong Model Australian Model How to use Chinese Model Acrobat Reader Japanese Model Korea Model Tourist Model Link SPECIFICATIONS BLOCK DIAGRAMS PRINTED WIRING BOARDS SERVICE NOTE FRAME SCH
DSC-T3 SERVICE MANUAL LEVEL 1 DSC-T3 Ver 1.2 2005. 09 US Model Revision History AEP Model Link
DSC-T3 SERVICE MANUAL LEVEL 1 DSC-T3 Ver 1.2 2005. 09 US Model Canadian Model Revision History AEP Model UK Model E Model Hong Kong Model Australian Model Chinese Model Japanese Model Korea Model Tourist Model Link SPECIFICATIONS ACCESSORIES SELF DIAGNOSIS FUNCTION • INSTRUCTION MANUAL is shown at t
DSC-T3 SERVICE MANUAL LEVEL 1 DSC-T3 Ver 1.1 2005. 04 US Model Revision History UK Model Link SPECIFICATIONS ACCESSORIES SELF DIAGNOSIS FUNCTION
DSC-T3 SERVICE MANUAL LEVEL 1 DSC-T3 Ver 1.1 2005. 04 US Model AEP Model Revision History UK Model E Model Hong Kong Model Australian Model Chinese Model Japanese Model Korea Model Tourist Model Link SPECIFICATIONS ACCESSORIES SELF DIAGNOSIS FUNCTION • INSTRUCTION MANUAL is shown at the end of this
SPECIFICATIONS Camera [LCD screen] BC-CS3 battery charger
DSC-T30 SERVICE MANUAL LEVEL 2 US Model Ver 1.0 2006.03 Canadian Model Revision History AEP Model UK Model How to use E Model Acrobat Reader Australian Model Hong Kong Model Chinese Model Internal memory ON BOARD Korea Model Brazilian Model Japanese Model Tourist Model Photo: Silver Link SPECIFICATI
DSC-T5 SERVICE MANUAL LEVEL 1 US Model UK Model E Model Australian Model Hong Kong Model Chinese Model Korea Model Brazilian Model Japanese Model Tourist Model
DSC-T5 SERVICE MANUAL LEVEL 1 US Model Ver 1.2 2005.10 Canadian Model Revision History AEP Model UK Model E Model Australian Model Hong Kong Model Chinese Model Korea Model Brazilian Model Japanese Model Photo: Silver Tourist Model Link SPECIFICATIONS ACCESSORIES INSTRUCTION MANUAL SERVICE NOTE The