Download: These specifications are extracted from instruction

DSC-S600 SERVICE MANUAL LEVEL 1 US Model Ver 1.0 2005. 12 Canadian Model Revision History AEP Model UK Model E Model Australian Model Chinese Model Brazilian Model Hong Kong Model Korea Model Link SPECIFICATIONS ACCESSORIES SELF-DIAGNOSIS FUNCTION INSTRUCTION MANUAL Note : Note : The components identified by Les composants identifiés par mark 0 or dotted line with mark une marque 0 sont critiques 0 are critical for safety. pour la sécurité. Replace only with part number Ne les remplacer que par une specified. pièce portant le numéro spécifié. DIGITAL STILL CAMERA 2005L1600-1 DSC-S600_L1 ©2005....
Author: 阿由葉 Shared: 8/19/19
Downloads: 272 Views: 707

Content

DSC-S600 SERVICE MANUAL LEVEL 1 US Model Ver 1.0 2005. 12 Canadian Model

Revision History AEP Model

UK Model E Model Australian Model Chinese Model Brazilian Model Hong Kong Model Korea Model Link

SPECIFICATIONS ACCESSORIES SELF-DIAGNOSIS FUNCTION INSTRUCTION MANUAL Note : Note : The components identified by Les composants identifiés par mark 0 or dotted line with mark une marque 0 sont critiques 0 are critical for safety. pour la sécurité. Replace only with part number Ne les remplacer que par une specified. pièce portant le numéro spécifié.

DIGITAL STILL CAMERA

2005L1600-1 DSC-S600_L1 ©2005.12 9-876-922-41 Sony EMCS Co. Published by DI Technical Support Department,

These specifications are extracted from instruction

manual of DSC-S600 (2-658-425-11).

SPECIFICATIONS Camera [Power, general]

[System] Power R6 (size AA) Alkaline batteries (2), 3 V Image device 7.18 mm (1/2.5 type) color HR 15/51:HR6 (size AA) CCD, Primary color filter Nickel-Metal Hydride batteries Total pixel number of camera (2, not supplied), 2.4 V Approx. 6 183 000 pixels ZR6 (size AA) Oxy Nickel Primary Battery (2, not Effective pixel number of camera supplied), 3 V Approx. 6 003 000 pixels AC-LS5K AC Adaptor (not Lens Carl Zeiss Vario-Tessar supplied), 4.2V3zoom lens Power consumption f = 5.1 – 15.3 mm (31 – 93 mm (during shooting with the LCD screen on) when converted to a 35 mm still camera) 1.0 W F2.8 – 5.1 Operating temperature Automatic ND filter switching 0°C to +40°C (+32°F to Exposure control Automatic exposure, Scene +104°F) Selection (7 modes) Storage temperature White balance Automatic, Daylight, Cloudy, –20°C to +60°C (–4°F to Fluorescent, Incandescent +140°F) File format (DCF compliant) Dimensions 99.952. 0×36.8 mm Still images: Exif Ver. 2.21 (4×2 1/8×1 1/2 inches) JPEG compliant, DPOF (W/H/D, excluding protrusions) compatible Mass Approx. 181 g (6.4 oz) Movies: MPEG1 compliant (including two batteries and (Monaural) wrist strap, etc.) Recording media Internal Memory (32 MB) Microphone Electret condenser microphone “Memory Stick Duo” Speaker Dynamic speaker Flash Recommended distance (ISO set to Auto): approx. 0.2 m to Exif Print Compatible 7.0 m (7 7/8 inches to 275 5/8 PRINT Image Matching III inches) (W)/approx. 0.5 m to Compatible 3.8 m (19 3/4 inches to 149 5/8 inches) (T) PictBridge Compatible [Input and Output connectors] Design and specifications are subject to change USB jack mini-B without notice. USB communication Hi-Speed USB (USB 2.0 compliant) [LCD screen] LCD panel 5.1 cm (2.0 type) TFT drive Total number of dots 84 960 (354×240) dots

DSC-S600_L1

— 2 —,

SAFETY CHECK-OUT

After correcting the original service problem, perform the following safety checks before releasing the set to the customer. 1. Check the area of your repair for unsoldered or poorly-soldered 4. Look for parts which, through functioning, show obvious signs connections. Check the entire board surface for solder splashes of deterioration. Point them out to the customer and and bridges. recommend their replacement. 2. Check the interboard wiring to ensure that no wires are 5. Check the B+ voltage to see it is at the values specified. "pinched" or contact high-wattage resistors. 6. Flexible Circuit Board Repairing 3. Look for unauthorized replacement parts, particularly • Keep the temperature of the soldering iron around 270˚C transistors, that were installed during a previous repair. Point during repairing. them out to the customer and recommend their replacement. • Do not touch the soldering iron on the same conductor of the circuit board (within 3 times). • Be careful not to apply force on the conductor when soldering or unsoldering. SAFETY-RELATED COMPONENT WARNING!! ATTENTION AU COMPOSANT AYANT RAPPORT À LA SÉCURITÉ! COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE WITH LES COMPOSANTS IDENTIFÉS PAR UNE MARQUE 0 SUR LES MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU PUBLISHED BY SONY. DANS LES SUPPÉMENTS PUBLIÉS PAR SONY. CAUTION : Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.

DSC-S600_L1

— 3 —,

SELF-DIAGNOSIS FUNCTION DESCRIPTION ON SELF-DIAGNOSIS DISPLAY Self-diagnosis display

• C: ss: ss

You can reverse the camera

malfunction yourself. (However, contact your Sony dealer or local authorized Sony service facility when you cannot recover from the camera malfunction.) • E: ss: ss

Contact your Sony dealer or local

authorized Sony service facility.

Display Code Countermeasure Cause Caution Display During Error C:32:ss Turn the power off and on again. Trouble with hardware. SYSTEM ERROR Format the “Memory Stick Duo” or “Memory Stick Duo” or internal memory is FORMAT ERROR

internal memory. unformatted.

C:13:ss Insert a new “Memory Stick Duo”. “Memory Stick Duo” is broken. MEMORY STICK ERROR Turn the power off and on again. Trouble with internal memory. INTERNAL MEMORY ERROR

Note: If other codes are displayed, service is required. Please send the set to a specialized center.

METHOD FOR COPYING THE DATA IN INTERNAL MEMORY

Copy Copies all images in the internal memory to a “Memory Stick Duo”. OK See the following procedure. Cancel Cancels the copying. 1 Insert a “Memory Stick Duo” having 32 MB or larger capacity. 2 Select [OK] with v on the control button, then press z. The message “All data in internal memory will be copied Ready?” appears. 3 Select [OK] with v, then press z. Copying starts. Use batteries with enough capacity or the AC Adaptor (not supplied). If you attempt to copy image files using batteries with little remaining capacity, the batteries may run out, causing copying to fail or possibly corrupting the data. You cannot copy individual images. The original images in the internal memory are retained even after copying. To delete the contents of the internal memory, remove the “Memory Stick Duo” after copying, then execute the [Format] command in (Internal Memory Tool) (page 46). You cannot select a folder copied on a “Memory Stick Duo”. Even if you copy data, a (Print order) mark is not copied.

DSC-S600_L1

— 4 —, Checking supplied accessories. Make sure that the following accessories are supplied with your camcorder. R6 (size AA) alkaline batteries (2) USB cable (1) Wrist strap (1) (not supplied) (Except BR model) (Except BR model) 1-827-038-11 2-050-981-01

Other accessories

2-666-673-01 CD-ROM (CYBER-SHOT APPLICATION SOFTWARE) (EXCEPT BR) 2-658-423-11 INSTRUCTION (READ THIS FIRST) (ENGLISH)(EXCEPT CH,KR,BR) 2-658-423-21 INSTRUCTION (READ THIS FIRST) (FRENCH/ITALIAN)(CND,AEP) 2-658-423-31 INSTRUCTION (READ THIS FIRST) (SPANISH/PORTUGUESE)(AEP,E) 2-658-423-41 INSTRUCTION (READ THIS FIRST) (GERMAN/DUTCH)(AEP) 2-658-423-51 INSTRUCTION (READ THIS FIRST) (TRADITIONAL CHINESE/SIMPLIFIED CHINESE)(E,HK,CH) 2-658-423-61 INSTRUCTION (READ THIS FIRST) (RUSSIAN)(AEP) 2-658-423-71 INSTRUCTION (READ THIS FIRST) (ARABIC/PERSIAN)(E) 2-658-423-81 INSTRUCTION (READ THIS FIRST) (KOREAN)(KR) 2-658-423-91 INSTRUCTION (READ THIS FIRST) (CZECH/POLISH)(AEP) 2-658-424-11 INSTRUCTION (READ THIS FIRST) (HUNGARIAN/SLOVAKIAN)(AEP) 2-658-424-21 INSTRUCTION (READ THIS FIRST) (SWEDISH/FINNISH)(AEP) 2-658-424-31 INSTRUCTION (READ THIS FIRST) (NORWEGIAN/DANISH)(AEP) 2-658-425-11 INSTRUCTION (USER’S GUIDE) (ENGLISH)(EXCEPT CH,KR,BR) 2-658-425-21 INSTRUCTION (USER’S GUIDE) (FRENCH/ITALIAN)(CND,AEP) 2-658-425-31 INSTRUCTION (USER’S GUIDE) (SPANISH/PORTUGUESE)(AEP,E) 2-658-425-41 INSTRUCTION (USER’S GUIDE) (GERMAN/DUTCH)(AEP) 2-658-425-51 INSTRUCTION (USER’S GUIDE) (TRADITIONAL CHINESE/SIMPLIFIED CHINESE)(E,HK,CH) 2-658-425-61 INSTRUCTION (USER’S GUIDE) (RUSSIAN)(AEP) 2-658-425-71 INSTRUCTION (USER’S GUIDE) (ARABIC/PERSIAN)(E) 2-658-425-81 INSTRUCTION (USER’S GUIDE) (KOREAN)(KR) 2-658-425-91 INSTRUCTION (USER’S GUIDE) (POLISH/CZECH)(AEP) 2-658-426-11 INSTRUCTION (USER’S GUIDE) (HUNGARIAN/SLOVAKIAN)(AEP) 2-658-426-21 INSTRUCTION (USER’S GUIDE) (SWEDISH/FINNISH)(AEP) 2-658-426-31 INSTRUCTION (USER’S GUIDE) (NORWEGIAN/DANISH)(AEP) • Abbreviation AR : Argentine model AUS : Australian model BR : Brazilian model CH : Chinese model CND : Canadian model EE : East European model HK : Hong Kong model J : Japanese model JE : Tourist model KR : Korea model NE : North European model RU : Russian model

DSC-S600_L1

— 5 —,

Enjoying

the camera

Using the menu Using the Setup Digital Still Camera screen User’s Guide/ Troubleshooting Using your computer DSC-S600 Printing still images Troubleshooting

“Read This First” (separate volume) Explains the set-up and basic operations for shooting/playback with your camera. Others Operating Instructions Before operating the unit, please read this manual and Index “Read This First” (separate volume) thoroughly, and retain them for future reference. Additional information on this product and answers to frequently asked questions can be found at our Owner’s Record Customer Support Website. The model and serial numbers are located on the bottom. Record the serial number in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. Model No. DSC-S600 Printed on 100% recycled paper using VOC (Volatile Organic Compound)-free vegetable oil based ink. Serial No. _ Printed in China © 2006 Sony Corporation 2-658-425-11(1), If you have any questions about this product, you

WARNING may call:

To reduce fire or shock hazard, do Sony Customer Information Services Center not expose the unit to rain or 1-800-222-SONY (7669) moisture. The number below is for the FCC related matters only.

For Customers in the U.S.A. Regulatory Information

Declaration of Conformity Trade Name: SONY Model No.: DSC-S600 Responsible Party: Sony Electronics Inc. Address: 16450 W. Bernardo Dr, San Diego, CA 92127 U.S.A. Telephone No.: 858-942-2230 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause This symbol is intended to harmful interference, and (2) this device must alert the user to the presence accept any interference received, including of uninsulated “dangerous interference that may cause undesired voltage” within the product’s operation. enclosure that may be of sufficient magnitude to constitute a risk of electric CAUTION shock to persons. You are cautioned that any changes or This symbol is intended to modifications not expressly approved in this alert the user to the presence manual could void your authority to operate this of important operating and equipment. maintenance (servicing) instructions in the literature accompanying the appliance.,

Note: For Customers in Europe

This equipment has been tested and found to comply with the limits for a Class B digital This product has been tested and found compliant device, pursuant to Part 15 of the FCC Rules. with the limits set out in the EMC Directive for These limits are designed to provide reasonable using connection cables shorter than 3 meters (9.8 protection against harmful interference in a feet). residential installation. This equipment generates, uses, and can radiate radio frequency energy and, Attention if not installed and used in accordance with the The electromagnetic fields at the specific instructions, may cause harmful interference to frequencies may influence the picture and sound radio communications. However, there is no of this camera. guarantee that interference will not occur in a particular installation. If this equipment does Notice cause harmful interference to radio or television reception, which can be determined by turning the If static electricity or electromagnetism causes equipment off and on, the user is encouraged to data transfer to discontinue midway (fail), restart try to correct the interference by one or more of the application or disconnect and connect the the following measures: communication cable (USB, etc.) again. – Reorient or relocate the receiving antenna. Disposal of Old Electrical & Electronic – Increase the separation between the equipment and receiver. Equipment (Applicable in the – Connect the equipment into an outlet on a European Union and other European circuit different from that to which the countries with separate collection receiver is connected. systems) – Consult the dealer or an experienced radio/TV technician for help. The supplied interface cable must be used with the equipment in order to comply with the limits for a digital device pursuant to Subpart B of Part 15 of FCC Rules. This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product.,

Notes on using your camera Types of “Memory Stick” that can be No compensation for contents of the

used (not supplied) recording The IC recording medium used by this • The contents of the recording cannot be camera is a “Memory Stick Duo”. There are compensated for if recording or playback is not two types of “Memory Stick”. possible due to a malfunction of your camera or recording media, etc. “Memory Stick Duo”: you can use a “Memory Stick Duo” with your Internal memory and “Memory Stick camera. Duo” back up • If you turn off the power or open the battery cover or “Memory Stick Duo” cover, etc. during the access lamp is lit, the data in the internal memory or “Memory Stick Duo” may be corrupted. Be sure to back up the data to avoid the potential risk of data loss. See pages 22 and “Memory Stick”: you cannot use a 55 on how to back up the data. “Memory Stick” with your camera.

Notes on recording/playback

• This camera is neither dust-proof, nor splash- proof, nor water-proof. Read “Precautions” (page 94) before operating the camera. • Before you record one-time events, make a trial

Other memory cards cannot be used. recording to make sure that the camera is

working correctly. • For details on “Memory Stick Duo”, see • Be careful not to get the camera wet. Water page 90. entering the inside of the camera may cause

When using a “Memory Stick Duo” malfunctions which in some cases may not be repairable.

with “Memory Stick” compatible • Do not aim the camera at the sun or other bright equipment light. This may cause irrecoverable damage to You can use the “Memory Stick Duo” by your eyes. Or it may cause the malfunction of inserting it into the Memory Stick Duo your camera. Adaptor (not supplied). • Do not use the camera near a location that generates strong radio waves or emits radiation, or a location with a strong magnetic field. The camera may not be able to record or play back properly. Memory Stick Duo Adaptor • Using the camera in sandy or dusty locations may cause malfunctions.

Carl Zeiss lens • If moisture condensation occurs, remove it

before using the camera (page 94). This camera is equipped with a Carl Zeiss • Do not shake or strike the camera. In addition to lens which is capable of reproducing sharp malfunctions and an inability to record images, images with excellent contrast. this may render the recording medium unusable, The lens for this camera has been produced or cause image data breakdown, damage or loss. under a quality assurance system certified • Clean the flash surface before use. The heat of by Carl Zeiss in accordance with the quality flash emission may cause dirt on the flash standards of Carl Zeiss in Germany. surface to become discolored or to stick to the flash surface, resulting in insufficient light emission.,

Notes on the LCD screen, LCD finder The pictures used in this manual

(for models with an LCD finder) and The photographs used as examples of pictures in lens this manual are reproduced images, and are not actual images shot using this camera. • The LCD screen and the LCD finder are manufactured using extremely high-precision technology so over 99.99% of the pixels are operational for effective use. However, there may be some tiny black points and/or bright points (white, red, blue or green in color) that constantly appear on the LCD screen and the LCD finder. These points are normal in the manufacturing process and do not affect the recording in any way. Black (white/red/blue/ green) points • Exposing the LCD screen, the finder or the lens to direct sunlight for long periods may cause malfunctions. Be careful when placing the camera near a window or outdoors. • Do not press against the LCD screen. The screen may be discolored and that may cause a malfunction. • Images may trail across on the LCD screen in a cold location. This is not a malfunction. • This camera is equipped with a power zoom lens. Be careful not to bump the lens, and be careful not to apply force to it.

On image data compatibility

• This camera conforms with DCF (Design rule for Camera File system) universal standard established by JEITA (Japan Electronics and Information Technology Industries Association). • Playback of images recorded with your camera on other equipment and playback of images recorded or edited with other equipment on your camera are not guaranteed.

Warning on copyright

Television programs, films, videotapes, and other materials may be copyrighted. Unauthorized recording of such materials may be contrary to the provisions of the copyright laws.,

For full use of the digital still camera

Prepare the camera and shoot images easily “Read This First” (separate volume) 1 Prepare the batteries 2 Turn the camera on/set the clock 3 Insert a “Memory Stick Duo” (not supplied) 4 Select the image size for use 5 Shoot images easily (Auto adjustment mode) Shoot still images (Scene Selection) 6 View/delete images Get more friendly with your camera This manual • Shoot with your favorite settings (Program auto shooting) t page 24 • Enjoy various shooting/playback using the menu t page 26 • Change the default settings t page 42 Connect your camera to a PC or a printer This manual • Copy your images to a computer and enjoy editing them in various ways t page 52 • Print images by connecting your camera directly to a printer (PictBridge compliant printers only) t page 69,

Table of contents

Notes on using your camera ...4

Enjoying the camera

Basic techniques for better images ...10 Focus – Focusing on a subject successfully... 10 Exposure – Adjusting the light intensity ... 11 Color – On the effects of lighting... 12 Quality – On “image quality” and “image size” ... 12 Identifying parts...14 Indicators on the screen ...16 Changing the screen display ...20 Number of still images and recording time of movies...21 When you do not have a “Memory Stick Duo” (Recording with the internal memory) ...22 Battery life and number of images that can be recorded/viewed ...23 Using the mode switch ...24

Using the menu Using menu items ...26 Menu items ...27

Shooting menu ...28 (Camera) (EV) 9 (Focus) WB (White Bal)

ISO

(P.Quality) Mode (REC Mode) M (Interval) (Flash Level) PFX (P.Effect) (Saturation) (Contrast) (Sharpness) (Setup), Viewing menu ... 35 (Folder) - (Protect)

DPOF

(Print) (Slide) (Resize) (Rotate) (Divide) (Setup) Trimming

Using the Setup screen

Using Setup items... 42 Camera ... 43 AF Mode Digital Zoom Red Eye Reduction AF Illuminator Auto Review Internal Memory Tool... 46 Format Memory Stick Tool... 47 Format Create REC. Folder Change REC. Folder Copy Setup 1... 49 Beep Language Initialize Setup 2... 50 File Number USB Connect Clock Set,

Using your computer

Enjoying your Windows computer ...52 Installing the supplied software ...54 Copying images to your computer...55 Viewing image files stored on a computer with your camera (using a “Memory Stick Duo”) ...61 Using the supplied software ...62 Using your Macintosh computer...66

Printing still images

How to print still images ...68 Printing images directly using a PictBridge compliant printer ...69 Printing at a shop ...73

Troubleshooting

Troubleshooting ...75 Warning indicators and messages ...87

Others

On the “Memory Stick” ...90 On the batteries...92 Precautions ...94 Specifications ...95

Index ...96

, Enjoying the camera

Basic techniques for better images

Focus Exposure Color Quality This section describes the basics so you can enjoy your camera. It tells you how to use various camera functions such as the mode switch (page 24), the menus (page 26), and so on.

Focus Focusing on a subject successfully

When you press the shutter button halfway down, the camera adjusts the focus automatically (Auto Focus). Remember to press the shutter button only halfway down. Press the shutter Press the shutter AE/AF lock Then press the button fully down button halfway Flashing , lit/beeps shutter button straight away. down. fully down. To shoot a still image difficult to focus ont9(Focus) (page 29) If the image looks blurred even after focusing, it may be because of camera shake. t See “Hints for preventing blur” (as follows).

Hints for preventing blur

Hold the camera steadily, keeping your arms at your side. Also, you can stabilize the camera by leaning against a tree or a building beside you. Using a tripod, and using the flash in dark places are also recommended., Enjoying the camera

Exposure Adjusting the light intensity

You can create various images by adjusting the exposure and the ISO sensitivity. Exposure is the amount of light that the camera will receive when you release the shutter. Shutter speed = Length of time the camera receives

Exposure: light

Aperture = Size of the opening allowing light to pass through ISO = Recording sensitivity Overexposure The exposure is automatically set to the = too much light proper value in the auto adjustment mode. Whitish image However, you can adjust it manually using the functions below. Correct exposure EV: Allows you to adjust the exposure that has been determined by the camera. t page 28 Metering Mode: Underexposure Allows you to change the part of the = too little light subject to be measured to determine the Darker image exposure. t step 5 in “Read This First”

Adjusting the ISO sensitivity

ISO is unit of measurement (sensitivity), estimating how much light an image pickup device (equivalent to photo films) receives. Even when the exposure is the same, images differ depending on the ISO sensitivity. To adjust the ISO sensitivity t page 31 High ISO sensitivity Records a bright image even when shooting in a dark location. However, the image tends to become noisy. Low ISO sensitivity Records a smoother image. However, the image may become darker when the exposure is not sufficient.,

Color On the effects of lighting

The apparent color of the subject is affected by the lighting conditions.

Example: The color of an image affected by light sources

Weather/lighting Daylight Cloudy Fluorescent Incandescent Characteristics of White (standard) Bluish Blue-tinged Reddish light The color tones are adjusted automatically in the auto adjustment mode. However, you can adjust color tones manually with [White Bal] (page 30).

Quality On “image quality” and “image size”

A digital image is made up of a collection of small dots called pixels. If it contains a large number of pixels, the picture becomes large, it takes up more memory, and the image is displayed in fine detail. “Image size” is shown by the number of pixels. Although you cannot see the differences on the screen of the camera, the fine detail and data processing time differ when the image is printed or displayed on a computer screen. Description of the pixels and the image size 1 Image size: 6M 2816 pixels × 2112 pixels = 5,947,392 pixels 2 Image size: VGA(E-Mail) 640 pixels × 480 pixels = 307,200 pixels Pixels, Enjoying the camera

Selecting the image size for use (t step 4 in “Read This First”)

Pixel Many pixels (Fine image quality and Example: Printing in large file size) up to A4 size Few pixels (Rough image quality but Example: An attached small file size) image to be sent by e- mail The default settings are marked with . Image size Usage guidelines 6M (2816×2112) Larger For printing in A4 size or high density images in A5 size 3:2* (2816×1872) 3M (2048×1536) 2M (1632×1224) For printing in postcard size VGA(E-Mail) For recording a large number of images (640×480) Smaller For attaching images to e-mail or creating web pages 16:9(HDTV)** For viewing images on a wide TV or Hi-Vision (1920×1080) compatible TV*** * Images are recorded in the same 3:2 aspect ratio as photograph printing paper or postcards, etc. ** Both edges of the image may be cut off when printing (page 84). *** You can enjoy even higher picture quality by connecting the camera via a “Memory Stick” slot or a USB connection.

Selecting the image quality (compression ratio) in combination (page 31)

You can select the compression ratio when digital images are saved. When you select a high compression ratio, the image lacks the fineness of detail, but has a smaller file size.,

Identifying parts

See the pages in parentheses for details of operation. 1 5 q; 263qa74qs 5 qd 8 qf A POWER button/lamp (t step 2 in “Read This First”) B Shutter button (t step 5 in “Read This First”) qgqh qj qk qlw; C Flash (t step 5 in “Read This First”) D Self-timer lamp (t step 5 in “Read A AE/AF lock lamp/self-timer lamp This First”)/AF illuminator (44) (green) (t step 5 in “Read This First”) E Microphone B Flash charge lamp/Record lamp (orange) (t step 5 in “Read This F Lens First”) G Finder window C Finder (t step 5 in “Read This First”) D Mode switch (24) E MENU button (26) F LCD screen (20) G (Screen status) button (20) H (Image Size/Delete) button (t step 4 and 6 in “Read This First”) I For shooting: Zoom (W/T) button (t step 5 in “Read This First”) For viewing: / (Playback zoom) button/ (Index) button (t step 6 in “Read This First”) J Control button Menu on: v/V/b/B/z (t step 2 in “Read This First”) Menu off: / / / (t step 5 in “Read This First”), Enjoying the camera K Hook for wrist strap (t “Read This T AC Adaptor cord cover First”) To use the AC-LS5K AC Adaptor (not L Battery cover (t step 1 in “Read This supplied) First”) M Access lamp (t step 4 in “Read This First”) N OPEN button (t step 1 in “Read This First”) O (USB) jack cover P (USB) jack (56) Q Tripod receptacle (bottom) • Use a tripod with a screw length of less than 5.5 mm (7/32 inch). You will be unable to firmly secure the camera to tripods having screws longer than 5.5 mm (7/32 inch), and may damage the camera. • After use, remove the camera from the tripod. R Speaker (bottom) S “Memory Stick Duo” cover (t step 3 in “Read This First”) • Do not pinch the cord when you close the cover.,

Indicators on the screen

See the pages in parentheses for details of A operation. Display Indication

When shooting still images Battery remaining (t step

1 in “Read This First”) z AE/AF lock (t step 5 in13“Read This First”) M Recording mode (24, 31) 4 White balance (30) STBY Standby/Recording a movie REC (t step 5 in “Read This25First”) Camera mode (Scene Selection) (t step 5 in

When shooting movies “Read This First”)

Camera mode (Program) 1 3 (24) SL Flash mode (t step 5 in “Read This First”) + 4 1.3 Zoom scaling (43, t step 5 in “Read This First”) 2 5 Red Eye Reduction (44) Sharpness (34) Saturation (33) Contrast (33) ON AF illuminator (44) Metering mode (t step 5 in “Read This First”) Picture effect (33)

B

Display Indication S AF M AF AF mode (43) AF range finder frame indicator (29), Enjoying the camera C Display Indication Display Indication AF range finder frame (29) Image size (31, t step 4 in 1M “Read This First”) FINE STD Image quality (31) E 101 Recording folder (47) Display Indication • This does not appear when NR slow shutter using the internal memory. • When using certain shutter Remaining internal speeds*, the NR slow memory capacity (21) shutter function activates automatically to reduce the Remaining “Memory picture noise. Stick” capacity (21) * When the shutter speed is 00:00:00 Recording time [maximum equal to or slower than [00:28:05] recordable time] (21) 1/6 second (when [ISO] is 1/30" Multi Burst interval (32) set to [Auto], [80], [100] or [200]). 400 Remaining number of When the shutter speed is recordable images (21) equal to or slower than Self-timer ( step 5 in 1/25 second (when [ISO] is t set to [400], [800] or “Read This First”) [1000]). C:32:00 Self-diagnosis display (87) 125 Shutter speed ISO number (31) F3.5 Aperture value D +2.0EV Exposure Value (28) Menu/Guide menu (26) Display Indication (not displayed Vibration warning (10) on the screen • Indicates vibration may on the previous prevent you from shooting page) clear images due to insufficient lighting. Even if the vibration warning appears, you can still shoot images. However, we recommend using the flash for better lighting or using a tripod or other means to stabilize the camera. E Low battery warning (23, 87) + Spot metering cross hairs (t step 5 in “Read This First”),

When playing back still images A

Display Indication

M

1 3 Battery remaining (t step 1 in “Read This First”) 4 M Recording mode (24, 31) Image size (31, t step 4 in “Read This First”) 1M - Protect (36) Print order (DPOF) mark

When playing back movies (73)

Change folder (35) • This does not appear when13using the internal memory. 1.3 Zoom scaling (t step 6 in “Read This First”) Step Frame by frame playback 12/16 (31) 2 N Playback (t step 6 in 5 “Read This First”) Volume (t step 6 in “Read This First”)

B

Display Indication 101-0012 Folder-file number (35) Playback bar (t step 6 in “Read This First”), Enjoying the cameraCEDisplay Indication Display Indication PictBridge connecting (70) 200611Recorded date/time of the 101 Recording folder (47) 9:30 AM playback image (51) • This does not appear when DPOF Menu/Guide menu (26) using the internal memory. z PAUSE Playing back Multi Burst 101 Playback folder (35) z PLAY images in series (31) • This does not appear when BACK/ Select images using the internal memory. NEXT Remaining internal Adjust volume memory capacity (21) VOLUME Remaining “Memory Stick” capacity (21) 8/8 12/12 Image number/Number of images recorded in selected folder (35) C:32:00 Self-diagnosis display (87) 00:00:12 Counter (t step 6 in “Read This First”)

D

Display Indication Do not disconnect the USB cable (71) +2.0EV Exposure Value (28) ISO number (31) Metering mode (t step 5 in “Read This First”) Flash White balance (30) 500 Shutter speed F3.5 Aperture value Playback image (t step 6 in “Read This First”),

Changing the screen display

Each time you press the (Screen status) button, the display changes as follows. Indicators off LCD screen off Indicators on

VGA

96 Image information is displayed during playback. • When you set the LCD screen to Off, the digital zoom does not function (page 43) and [AF Mode] is set to [Single] (page 43). When you select (Flash mode)/ (Self-timer)/ (Metering mode), the image is displayed for about two seconds.,

Number of still images and recording time of

movies The tables show the approximate number of still images and the length of time for movies that Enjoying the camera can be recorded on a “Memory Stick Duo” formatted with this camera. The values may vary depending on the shooting conditions. The number of images that can be recorded using the internal memory is equivalent to that of a 32 MB “Memory Stick Duo”.

The number of still images (The image quality is [Fine] on the upper line and

[Standard] on the lower line.) (Units: Images) Capacity Size 32MB 64MB 128MB 256MB 512MB 1GB 2GB 6M 10 21 42 77 157 322 660 19 39 79 142 290 592 1215 3:2 10 21 42 77 157 322 660 19 39 79 142 290 592 1215 3M 20 41 82 148 302 617 1266 37 74 149 264 537 1097 2250 2M 33 66 133 238 484 988 2025 61 123 246 446 907 1852 3798 VGA(E-Mail) 196 394 790 1428 2904 5928 12154 491 985 1975 3571 7261 14821 30385 16:9(HDTV) 33 66 133 238 484 988 2025 61 123 246 446 907 1852 3798 • The number of images listed is for when [Mode] is set to [Normal]. • When the number of remaining shootable images is greater than 9,999, the “>9999” indicator appears. • You can resize the images later ([Resize], page 38).

The recording time of movies (Units: hour : minute : second)

Capacity Size 32MB 64MB 128MB 256MB 512MB 1GB 2GB 640(Fine) – – – 0:02:57 0:06:02 0:12:20 0:25:18 640(Standard) 0:01:27 0:02:56 0:05:54 0:10:42 0:21:47 0:44:27 1:31:09 160 0:22:42 0:45:39 1:31:33 2:51:21 5:47:05 11:44:22 24:18:25 • Movies with the size set to [640(Fine)] can only be recorded on a “Memory Stick PRO Duo”. • For image size and image quality, see page 12. • When images recorded using earlier Sony models are played back on this camera, the display may differ from the actual image size.,

When you do not have a “Memory Stick Duo”

(Recording with the internal memory) The camera has 32 MB of internal memory. This memory is not removable. Even when there is no “Memory Stick Duo” inserted in the camera, you can record images using this internal memory. • Movies with the image size set to [640(Fine)] cannot be recorded using the internal memory.

When a “Memory Stick Duo” (not supplied)

is inserted [Recording]: Images are recorded on the “Memory Stick

B Duo”.[Playback]: Images on the “Memory Stick Duo” are

played back. [Menu, Setup, etc.]: Various functions can be performed on images on the “Memory Stick Duo”.

When there is no “Memory Stick Duo”

inserted [Recording]: Images are recorded using the internal

B Internal memory.

memory [Playback]: Images stored in the internal memory are played back. [Menu, Setup, etc.]: Various functions can be performed on images in the internal memory.

On image data stored in the internal memory

We recommend that you copy (back up) data without fail using one of the following methods.

To copy (back up) data on a “Memory Stick Duo”

Prepare a “Memory Stick Duo” with a capacity of 32 MB or more, then perform the procedure explained in [Copy] (page 48).

To copy (back up) data on a hard disc of your computer

Perform the procedure on pages 55 to 59 without a “Memory Stick Duo” inserted in the camera. • You cannot move image data on a “Memory Stick Duo” to the internal memory. • By connecting the camera and a computer with a USB cable, you can copy data stored in the internal memory to a computer, but you cannot copy data on a computer to the internal memory.,

Battery life and number of images that can be

recorded/viewed The tables show the approximate number of • The number of shooting images/battery life does Enjoying the camera images that can be recorded/viewed and the not change, regardless of image size. battery life when you shoot images in [Normal] mode with new batteries and at an When viewing still images ambient temperature of 25°C (77°F). The Battery life numbers of images that can be recorded or Battery No. of images (min.) viewed take into account changing the Alkaline Approx. Approx. “Memory Stick Duo” as necessary. (supplied) 7400 370 Note that the actual numbers may be less than those indicated depending on the NH-AA-DB Approx. Approx. conditions of use. (Ni-MH) (not 10600 530 • The number of images that can be recorded/ supplied) viewed and the battery life are decreased under the following conditions: • Viewing single images in order at about three – The surrounding temperature is low. second intervals – The flash is used frequently. – The camera has been turned on and off many When shooting movies times. Battery LCD screen LCD screen – The zoom is used frequently. On Off – [AF Mode] is set to [Monitor]. Alkaline Approx. Approx. – The battery power is low. (supplied) 150 min. 200 min.

When shooting still images NH-AA-DB Approx. Approx.

(Ni-MH) (not 250 min. 350 min. No. of Battery supplied) Battery LCD screen images life (min.) (Approx.) (Approx.) • Shooting movies continuously with an image Alkaline On 160 80 size of [160] (supplied) Off 220 110 NH-AA-DB On 460 230 (Ni-MH) Off 580 290 (not supplied) • Shooting in the following situations: – (P.Quality) is set to [Fine]. – [AF Mode] is set to [Single]. – Shooting once every 30 seconds. – The zoom is switched alternately between the W and T ends. – The flash strobes once every two times. – The power turns on and off once every ten times. • The measurement method is based on the CIPA standard. (CIPA: Camera & Imaging Products Association),

Using the mode switch

Set the mode switch to the desired function. Mode switch Control button : Shooting movies t step 5 in “Read This First” : Playback/Edit t step 6 in “Read This First”

Still image shooting modes

: Auto: Auto adjustment mode Allows easy shooting with the settings adjusted automatically. t step 5 in “Read This First”

Program: Program auto shooting mode

Allows you to shoot with the exposure adjusted automatically (both the shutter speed and the aperture value). Also you can select various settings using the menu. (For details on the functions available t page 27) : Scene Selection mode Allows you to shoot with preset settings according to the scene. t step 5 in “Read This First”, Enjoying the camera

Scene Selection

For details t step 5 in “Read This First” For shooting an image appropriately according to the scene condition, a combination of functions is determined by the camera. ( : you can select the desired setting) Flash AF range finder White Balance Burst/Multi Burst Flash Level — — — SL Auto — / / /, Using the menu

Using menu items

v/V/b/B button Mode switch z button MENU button Control button 1 Turn on the power and set the mode switch. Different items are available depending on the position of the mode switch and the (Camera) menu settings. 2 Press MENU to display the menu. 3 Select the desired menu item with b/B on the control button. • If the desired item is invisible, keep pressing b/B until the item appears on the screen. • Press z after selecting an item when the mode switch is set to . 4 Select the setting with v/V. The setting you select is zoomed and is set. 5 Press MENU to turn off the menu. • If there is an item that is not displayed, an v/V mark appears on the edges of the location where menu items usually appear. To display an item that is not displayed, select the mark with the control button. • You cannot select items that are grayed out.,

Menu items For details on the operation t page 26

The menu items available vary depending on the mode switch position. Only the available Using the menu items are displayed on the screen. ( : available) Mode switch position: Auto Program Scene

Menu for shooting (page 28)

(Camera) — — (EV) — — 9 (Focus) — — WB (White Bal) — — ISO — — — (P.Quality) — — — Mode (REC Mode) — — M (Interval) — * — — (Flash Level) — * — — PFX (P.Effect) — — (Saturation) — — — — (Contrast) — — — — (Sharpness) — — — — (Setup) —

Menu for viewing (page 35)

(Folder) — — — — - (Protect) — — — — DPOF — — — — (Print) — — — — (Slide) — — — — (Resize) — — — — (Rotate) — — — — (Divide) — — — — (Setup) — — — — Trimming** — — — — * The operation is limited according to the Scene mode (page 25). **Available only during enlarged playback.,

Shooting menu For details on the operation t page 26

The default settings are marked with . (Camera) Select the still image camera mode. t page 24, step 5 in “Read This First” (EV) Manually adjusts the exposure. Toward – Toward + M +2.0EV Toward +: Brightens an image. 0EV The exposure is determined automatically by the camera. m –2.0EV Toward –: Darkens an image. • For details on the exposure t page 11 • The compensation value can be set in 1/3EV increments. • If a subject is being shot in extremely bright or dark conditions, or the flash is used, the exposure adjustment may not be effective.,

For details on the operation t page 26

Using the menu 9 (Focus) You can change the focus method. Use the menu when it is difficult to get the proper focus in auto focus mode. Center AF Focuses automatically on a subject in the center of the finder ( ) frame. • Using this with the AF lock function lets you shoot in the desired image composition. AF range finder frame AF range finder frame indicator Multi AF Focuses automatically on a subject in all ranges of the finder (Multipoint AF) frame. (Still image ) • This mode is useful when the subject is not in the center of the (Movie ) frame. AF range finder frame AF range finder frame indicator • AF stands for Auto Focus. • When you are shooting movies, [Multi AF] is recommended as the AF works even with a certain amount of vibration. • When you use Digital Zoom or AF Illuminator, priority AF movement is given to subjects in or near the center of the frame. In this case the or indicator flashes and the AF range finder frame is not displayed. • Some settings cannot be selected depending on the Scene mode.,

For details on the operation t page 26

z If the subject is out of focus When shooting with the subject at the edge of the frame (or the screen), or when using [Center AF], the camera may not focus on a subject at the edge of the frame. In such cases, do as follows. 1 Recompose the shot so that the subject is centered in the AF range finder, and press the shutter button halfway down to focus on the subject (AF lock). AE/AF lock indicator AF range finder frame As long as you do not press the shutter button fully down, you can retry the procedure as many times as you want. 2 When the AE/AF lock indicator stops flashing and remains on, return to the fully composed shot, and press the shutter button fully down.

WB (White Bal)

Adjusts the color tones according to the lighting condition in a situation, for example, when the colors of an image look strange. n (Incandescent) Adjusts for places where the lighting conditions change quickly such as at a party hall, or under bright lighting such as at photography studios. (Fluorescent) Adjusts for fluorescent lighting. (Cloudy) Adjusts for a cloudy sky. (Daylight) Adjusts for outdoors, shooting night scenes, neon signs, fireworks, or sunrise, or conditions before and after sundown. Auto Adjusts the White Balance automatically. • For details on the white balance t page 12 • Under fluorescent lights that flicker, the white balance function may not work correctly even though you select [ ] (Fluorescent). • Some options are not available depending on the Scene mode (page 25).,

For details on the operation t page 26

Using the menu

ISO

Selects a luminous sensitivity with units of ISO. The larger the number, the higher the sensitivity. 1000 Select a large number when shooting in dark locations or shooting a subject moving at high speed, or select a small 800 number to obtain high image quality. Auto • For details on the ISO sensitivity t page 11 • Note that the image tends to become noisier as the ISO sensitivity number increases. • [ISO] is set to [Auto] in the Scene mode. (P.Quality) Selects the still image quality. Fine (FINE) Records with high quality (low compression). Standard (STD) Records with standard quality (high compression). • For details on the image quality t page 12

Mode (REC Mode)

Selects whether the camera performs continuous shooting or not when you press the shutter button. Multi Burst ( M ) Records 16 frames in succession as a still image file when you press the shutter button. • This is convenient for checking your form in sports, for example. • You can select the Multi Burst shutter interval in [Interval] mode (page 32). Burst ( ) Records the maximum number of images in succession (refer to the following table) when you press and hold down the shutter button. • When “Recording” disappears, you can shoot the next image. Normal Does not shoot continuously.,

For details on the operation t page 26

On the [Multi Burst] • You can successively play back images shot in the Multi Burst mode using the following procedures: – To pause/resume: Press z on the control button. – To play back frame-by-frame: Press b/B in pause mode. Press z to resume playback in series. • You cannot use the following functions in the Multi Burst mode: – Smart zoom – Flash – Dividing a series of images shot in the Multi Burst mode – Deleting a frame in a series of images shot in the Multi Burst mode – Setting the frame interval to a mode other than [1/30] when (Camera) is set to [Auto] • When playing back a series of images shot in the Multi Burst mode using a computer or a camera not equipped with the Multi Burst function, the image is displayed as a single image with 16 frames. • The image size of images shot in the Multi Burst mode is 1M. • You may not be able to shoot images in the Multi Burst mode depending on the Scene mode (page 25). On the [Burst] • The flash is set to (No flash). • When recording with the self timer, a series of a maximum of five images is recorded. • When the battery level is low, or when the internal memory or “Memory Stick Duo” is full, the Burst stops. • You may not be able to shoot images in the Burst mode depending on the Scene mode (page 25). The maximum number of continuous shots (Units: images) Quality Size Fine Standard 6M 7 12 3:2 7 12 3M 12 21 2M 19 35 VGA(E-Mail) 100 100 16:9(HDTV) 19 35 M (Interval) Selects the frame interval in the [Multi Burst] mode (page 31). 1/7.5 (1/7.5") • This setting cannot be made when [Mode] (REC Mode) in the menu is set to other than [Multi Burst] (page 31). 1/15 (1/15") 1/30 (1/30") • M (Interval) is not displayed in some Scene modes.,

For details on the operation t page 26

Using the menu (Flash Level) Adjusts the amount of flash light. + ( +) Toward +: Makes the flash level higher. Normal – ( –) Toward –: Makes the flash level lower. • To change flash mode t step 5 in “Read This First” • You may not be able to set the Flash Level depending on the Scene mode (page 25).

PFX (P.Effect)

Allows you to shoot an image with special effects. B & W ( ) Records the image in monochrome (black and white). Sepia ( ) Records the image in sepia (like an old photograph). Off No effect. • This setting is not maintained when the power is turned off. (Saturation) Adjusts the saturation of the image. + ( ) Toward +: Brightens the color. Normal – ( ) Toward –: Darkens the color. (Contrast) Adjusts the contrast of the image. + ( ) Toward +: Enhances the contrast. Normal – ( ) Toward –: Reduces the contrast., For details on the operation t page 26 (Sharpness) Adjusts the sharpness of the image. + ( ) Toward +: Sharpens the image. Normal – ( ) Toward –: Softens the image. (Setup) See page 42.,

Viewing menu For details on the operation t page 26

The default settings are marked with . Using the menu (Folder) Selects the folder containing the image you want to play back when using the camera with “Memory Stick Duo”. OK See the following procedure. Cancel Cancels the selection. 1 Select the desired folder with b/B on the control button. 2 Select [OK] with v, then press z. z On the folder The camera stores images in a specified folder of a “Memory Stick Duo” (page 47). You can change the folder or create a new one. • To create a new folder t [Create REC. Folder] (page 47) • To change the folder for recording images t [Change REC. Folder] (page 48) • When multiple folders are created in the “Memory Stick Duo” and the first or last image in the folder is displayed, the following indicators appear. : Moves to the previous folder. : Moves to the next folder. : Moves to either the previous and next folders., For details on the operation t page 26 - (Protect) Protects images against accidental erasure. Protect (-) See the following procedure. Exit Exits the Protection function.

To protect images in single-image mode

1 Display the image you want to protect. 2 Press MENU to display the menu. 3 Select - (Protect) with b/B on the control button, then press z. The image is protected and the - (protect) indicator appears on the image. - 4 To protect other images, select the desired image with b/B, then press z.

To protect images in index mode

1 Press (Index) to display the index screen. 2 Press MENU to display the menu. 3 Select - (Protect) with b/B on the control button, then press z. 4 Select [Select] with v/V, then press z. 5 Select the image you want to protect with v/V/b/B, then press z. A green - indicator appears on the selected image. - (green) 6 Repeat step 5 to protect other images. 7 Press MENU. 8 Select [OK] with B, then press z. The - indicator turns white. The selected images are protected. • To protect all images in the folder, select [All In This Folder] in step 4, and press z. Select [On] with B, then press z.,

For details on the operation t page 26

Using the menu

To cancel the protection

In single-image mode Press z in step 3 or 4 of “To protect images in single-image mode.” In index mode 1 Select the image for which you want to remove protection in step 5 of “To protect images in index mode.” 2 Press z to turn the - indicator gray. 3 Repeat the operation above for all images to be unprotected. 4 Press MENU, select [OK] with B, and then press z.

To cancel protection of all images in the folder

Select [All In This Folder] in step 4 of “To protect images in index mode,” and press z. Select [Off] with B, then press z. • Note that formatting the internal memory or “Memory Stick Duo” erases all the data stored on the recording media, even if images are protected, and these images cannot be recovered. • It may take some time to protect an image.

DPOF

Adds a (Print order) mark to images you want to print (page 73). (Print) See page 69. (Slide) Plays back recorded images in order (Slide show).

Interval

3 sec Sets the slide show interval. 5 sec 10 sec 30 sec 1 min,

For details on the operation t page 26 Image

Folder Plays back all images in the selected folder. All Plays back all images stored on the “Memory Stick Duo”.

Repeat

On Plays back images in a continuous loop. Off After all the images have been played back, the slide show ends. Start See the following procedure. Cancel Cancels the slide show. 1 Select [Interval], [Image] and [Repeat] with v/V/b/B on the control button. 2 Select [Start] with V/B, then press z. The slide show starts. To end the slide show, press z, select [Exit] with B, then press z. • During a slide show, you can display the previous/next image with b/B. • The interval time is just a guideline, so it may vary depending on the image size, etc. (Resize) You can change the image size of a recorded image (Resize), and save it as a new file. The original image is retained even after resizing. 6M 3M The setting size is just a guideline. t step 4 in “Read This First” 2M

VGA

Cancel Cancels resizing. 1 Display the image you want to resize. 2 Press MENU to display the menu. 3 Select (Resize) with b/B on the control button, then press z. 4 Select the desired size with v/V, then press z. The resized image is recorded in the recording folder as the newest file. • For details on [Image Size] t step 4 in “Read This First” • You cannot change the size of movies or Multi Burst images. • When you change from a small size to a large size, the image quality deteriorates. • You cannot resize to an image size of 3:2 or 16:9. • When you resize a 3:2 or 16:9 image, the upper and lower black portions will be displayed on the image.,

For details on the operation t page 26

Using the menu (Rotate) Rotates a still image. Rotates an image. See the following procedure. OK Determines the rotation. See the following procedure. Cancel Cancels rotation. 1 Display the image to be rotated. 2 Press MENU to display the menu. 3 Select (Rotate) with b/B on the control button, then press z. 4 Select [ ] with v, then rotate the image with b/B. 5 Select [OK] with v/V, then press z. • You cannot rotate protected images, movies, or Multi Burst images. • You may not be able to rotate images shot with other cameras. • When viewing images on a computer, the image rotation information may not be reflected depending on the software. (Divide) Cuts movies, or deletes unnecessary portions of movies. This is the recommended function to use when the internal memory or “Memory Stick Duo” capacity is insufficient, or when you attach movies to your e-mail messages. • Note that the original movie is deleted and that number is skipped. Also note that you cannot restore files once you cut them. OK See the following procedure. Cancel Cancels division., For details on the operation t page 26

Example: Cutting a movie numbered 101_0002

This section describes an example of dividing a movie numbered 101_0002 and deleting it in the following file configuration. 1 Cutting scene A. Divide 101_0002 is divided into 101_0004 and 101_0005. 2 Cutting scene B. Divide 101_0005 is divided into 101_0006 and 101_0007. 3 Deleting scenes A and B if they are unnecessary. Delete Delete 4 Only the desired scenes remain.

Procedure

1 Display the movie to be divided. 2 Press MENU to display the menu. 3 Select (Divide) with b/B on the control button, then press z. 4 Select [OK] with v, then press z. The playback of the movie starts.,

For details on the operation t page 26

Using the menu 5 Press z at the desired cutting point. • When you want to adjust the cutting point, select [c/C] (frame rewind/forward) and adjust the cutting point using b/B. • If you want to change the cutting point, select [Cancel]. The playback of the movie starts again. 6 Select [OK] with v/V, and press z. 7 Select [OK] with v, then press z. The movie is cut. • The cut movies are assigned new numbers, and then recorded as the newest files in the selected recording folder. • You cannot cut the following kinds of images. – Still image – Movies not long enough to cut (shorter than about two seconds) – Protected movies (page 36) (Setup) See page 42.

Trimming

Records an enlarged image (t step 6 in “Read This First”) as a new file. Trimming See the following procedure. Return Cancels trimming. 1 Press MENU during playback zoom to display the menu. 2 Select [Trimming] with B on the control button, then press z. 3 Select the image size with v/V, then press z. The image is recorded, and the original image is displayed again. • The trimmed image is recorded as the newest file in the selected recording folder, and the original image is retained. • The quality of trimmed images may deteriorate. • You cannot trim to an image size of 3:2 or 16:9. • You cannot trim images displayed with Quick Review., Using the Setup screen

Using Setup items

You can change the default settings using the Setup screen. v/V/b/B button Mode switch z button MENU button Control button 1 Turn on the power. 2 Press MENU to display the menu. 3 After pressing B on the control button, go to the (Setup) setting, then press B again. 4 Press v/V/b/B on the control button to select the item you want to set. The frame of the selected item turns yellow. 5 Press z to enter the setting. To turn off the (Setup) screen, press MENU. To return to the menu from the (Setup) screen, press b on the control button repeatedly.

To cancel the (Setup) setting

Select [Cancel] if it appears, then press z on the control button. If it does not appear, select the previous setting again. • This setting is maintained even when the power is turned off.,

Camera For details on the operation t page 42

The default settings are marked with . Using the Setup screen

AF Mode

Selects the auto focus operation mode. Single (S AF) Automatically adjusts the focus when the shutter button is pressed and held halfway down. This mode is useful for shooting stationary subjects. Monitor (M AF) Automatically adjusts the focus before the shutter button is pressed and held halfway down. This mode shortens the time needed for focusing. • Battery consumption is faster than in [Single] mode. • When shooting using the finder with the LCD screen off, the camera operates in the [Single] mode.

Digital Zoom

Selects the digital zoom mode. The camera enlarges the image using optical zoom (up to 3×). When the zoom scale exceeds 3×, the camera uses either smart or precision digital zoom. Smart Enlarges the image digitally with almost no distortion. This is (Smart zoom) not available when the image size is set to [6M] or [3:2]. ( ) • The maximum zoom scale of Smart zoom is shown in the following table. Precision Enlarges all image sizes up to a maximum of 6×, but the (Precision digital zoom) image quality deteriorates. ( ) Off Does not use the digital zoom. Image size and maximum zoom scale using Smart zoom Size Maximum zoom scale 3M Approx. 4.1× 2M Approx. 5.2× VGA(E-Mail) Approx. 13× 16:9(HDTV) Approx. 4.4× • When you press the zoom button, the zoom scaling indicator appears as follows. The W side of this line is the optical zoom area, and the T side is the digital zoom area Zoom scaling indicator,

For details on the operation t page 42

• The maximum zoom scale of smart zoom/precision digital zoom includes the scale of the optical zoom. • The AF range finder frame does not appear when using the digital zoom. The or indicator flashes, and AF operates with priority on subjects located near the center of the frame. • When using the smart zoom, the image on the screen may look rough. However, this phenomenon has no effect on the recorded image.

Red Eye Reduction

Reduces the red-eye phenomenon when using the flash. Select this before shooting. On ( ) Reduces the red-eye phenomenon. • The flash pre-strobes twice or more before shooting. Off Does not use Red Eye Reduction. • Because it takes about a second until the shutter clicks, hold the camera firmly to prevent the effects of vibration. Also, do not let the subject move. • Red Eye Reduction may not produce the desired effects depending on individual differences, the distance to the subject, if the subject does not see the pre-strobe, or other conditions.

AF Illuminator

The AF illuminator supplies fill light to focus more easily on a subject in dark surroundings. The AF illuminator emits red light allowing the camera to focus easily when the shutter button is pressed halfway, until the focus is locked. The ON indicator appears at this time. Auto Uses the AF illuminator. Off Does not use AF illuminator. • If the AF illuminator light does not reach the subject sufficiently or the subject has no contrast, focus will not be achieved. (A distance of up to approximately 3.5 m (137 7/8 inches) (W)/2.5 m (98 1/2 inches) (T) is recommended.) • Focus is achieved as long as the AF illuminator light reaches the subject, even if the light is slightly off the center of the subject. • The AF range finder frame does not appear. The or indicator flashes, and AF operates with priority on subjects located near the center of the frame. • The AF illuminator does not operate when (Twilight mode) or (Landscape mode) is selected in the Scene mode. • The AF illuminator emits very bright light. Although there are no problems with safety, do not look directly into the AF illuminator emitter at close range.,

For details on the operation t page 42

Using the Setup screen

Auto Review

Displays the recorded image on the screen for approximately two seconds immediately after shooting a still image. On Use the Auto Review. Off Does not use Auto Review. • If you press the shutter button halfway down during this period, the recorded image display disappears and you can immediately shoot the next image.,

Internal Memory Tool For details on the operation t page 42

This item does not appear when a “Memory Stick Duo” is inserted in the camera. The default settings are marked with . Format Formats the internal memory. • Note that formatting irrevocably erases all data in the internal memory, including even protected images. OK See the following procedure. Cancel Cancels the formatting. 1 Select [OK] with v on the control button, then press z. The message “All data in internal memory will be erased Ready?” appears. 2 Select [OK] with v, then press z. The format is complete.,

Memory Stick Tool For details on the operation t page 42

This item appears only when a “Memory Stick Duo” is inserted in the camera. Using the Setup screen The default settings are marked with .

Format

Formats the “Memory Stick Duo”. A commercially available “Memory Stick Duo” is already formatted, and can be used immediately. • Note that formatting irrevocably erases all data on a “Memory Stick Duo”, including even protected images. OK See the following procedure. Cancel Cancels the formatting. 1 Select [OK] with v on the control button, then press z. The message “All data in Memory Stick will be erased Ready?” appears. 2 Select [OK] with v, then press z. The format is complete.

Create REC. Folder

Creates a folder in a “Memory Stick Duo” for recording images. OK See the following procedure. Cancel Cancels folder creation. 1 Select [OK] with v on the control button, then press z. The folder creation screen appears. 2 Select [OK] with v, then press z. A new folder is created with a number incremented one higher than the largest number, and the folder becomes the current recording folder. • For details on the folder, see page 35. • When not creating a new folder, the “101MSDCF” folder is selected as the recording folder. • You can create folders designated up to “999MSDCF.” • Images are recorded in the newly created folder until a different folder is created or selected. • You cannot delete a folder with the camera. To delete a folder, use your computer, etc. • Up to 4,000 images can be stored in one folder. When the folder capacity is exceeded, a new folder is automatically created. • For more information, see “Image file storage destinations and file names” (page 60).,

For details on the operation t page 42 Change REC. Folder

Changes the folder currently used for recording images. OK See the following procedure. Cancel Cancels changing the recording folder. 1 Select [OK] with v on the control button, then press z. The folder selection screen appears. 2 Select the desired folder with b/B, and [OK] with v, then press z. • You cannot select the “100MSDCF” folder as a recording folder. • You cannot move recorded images to a different folder.

Copy

Copies all images in the internal memory to a “Memory Stick Duo”. OK See the following procedure. Cancel Cancels the copying. 1 Insert a “Memory Stick Duo” having 32 MB or larger capacity. 2 Select [OK] with v on the control button, then press z. The message “All data in internal memory will be copied Ready?” appears. 3 Select [OK] with v, then press z. Copying starts. • Use batteries with enough capacity or the AC Adaptor (not supplied). If you attempt to copy image files using batteries with little remaining capacity, the batteries may run out, causing copying to fail or possibly corrupting the data. • You cannot copy individual images. • The original images in the internal memory are retained even after copying. To delete the contents of the internal memory, remove the “Memory Stick Duo” after copying, then execute the [Format] command in (Internal Memory Tool) (page 46). • You cannot select a folder copied on a “Memory Stick Duo”. • Even if you copy data, a (Print order) mark is not copied.,

Setup 1 For details on the operation t page 42

The default settings are marked with . Using the Setup screen Beep Selects the sound produced when you operate the camera. Shutter Turns on the shutter sound when you press the shutter button. On Turns on the beep/shutter sound when you press the control button/ press the shutter button. Off Turns off the beep/shutter sound. Language Selects the language to be used to display the menu items, warnings, and messages. Initialize Initializes the setting to the default setting. OK See the following procedure. Cancel Cancels the resetting. 1 Select [OK] with v on the control button, then press z. The message “Initialize all settings Ready?” appears. 2 Select [OK] with v, then press z. The settings are reset to the default setting. • Make sure that the power is not disconnected during resetting.,

Setup 2 For details on the operation t page 42

The default settings are marked with .

File Number

Selects the method used to assign file numbers to images. Series Assigns numbers to files in sequence even if the recording folder or the “Memory Stick Duo” is changed. (When the replaced “Memory Stick Duo” contains a file with a number higher than the last assigned number, a number one higher than the largest number is assigned.) Reset Starts from 0001 each time the folder is changed. (When the recording folder contains a file, a number one higher than the largest number is assigned.)

USB Connect

Selects the USB mode to be used when connecting the camera to a computer or a PictBridge compliant printer using the USB cable. PictBridge Connects the camera to a PictBridge compliant printer (page 69). PTP When [PTP] (Picture Transfer Protocol) is set and the camera is connected to a computer, the images in the recording folder on the camera are copied to the computer. (Compatible with Windows XP and Mac OS X.) Mass Storage Establishes a Mass Storage connection between the camera and a computer or other USB device (page 56). Auto The camera recognizes automatically and sets up communication with a computer or PictBridge compliant printer (pages 56 and 69). • If the camera and a PictBridge compliant printer cannot be connected when set to [Auto], change the setting to [PictBridge]. • If the camera and a computer or other USB device cannot be connected when set to [Auto], change the setting to [Mass Storage]., For details on the operation t page 42 Using the Setup screen Clock Set Sets the date and time. OK Select [OK] with v on the control button, and press z. Then, perform the procedure explained in “Set the clock” (t step 2 in “Read This First”). Cancel Cancels setting the clock., Using your computer

Enjoying your Windows computer

For details on using a Macintosh computer, refer to “Using your Macintosh computer” (page 66). This section describes the English version screen contents. Install the supplied software first (page 54) Copying images to your computer (page 55) Viewing images on your computer Enjoying images using the supplied software (page 62) • Viewing images saved on your computer • Viewing photos organized by date • Editing images Printing images, Using your computer

Recommended computer Notes on connecting your camera to a computer

environment • Operations are not guaranteed for all the The following environment is recommended computer environments recommended for a computer connected to mentioned above. the camera. • If you connect two or more USB devices to a single computer at the same time, some devices,

Recommended environment for including your camera, may not operate,

copying images depending on the types of USB devices you are using. OS (pre-installed): Microsoft Windows • Operations are not guaranteed when using a 2000 Professional, Windows Millennium USB hub. Edition, Windows XP Home Edition or • Connecting your camera using a USB interface Windows XP Professional that is compatible with Hi-Speed USB (USB 2.0 • Operation is not assured in an environment compliant) allows advanced transfer (high speed based on an upgrade of the operating transfer) as this camera is compatible with Hi- systems described above or in a multi-boot Speed USB (USB 2.0 compliant). environment. • There are three modes for a USB connection Processor: MMX Pentium 200 MHz or when connecting a computer, [Auto] (default faster setting), [Mass Storage] and [PTP] modes. This section describes the [Auto] and [Mass Storage] USB connector: Provided as standard as examples. For details on [PTP], see page 50. Display: • When your computer resumes from a suspend or Screen resolution; 800 × 600 dots or more sleep mode, communication between your Colors; High Color (16-bit color, 65,000 camera and your computer may not recover at colors) or more the same time.

Recommended environment for using

the supplied software OS (pre-installed): Microsoft Windows 2000 Professional, Windows Millennium Edition, Windows XP Home Edition or Windows XP Professional Sound card: 16-bit stereo sound card with speakers Processor/Memory: Pentium III 500 MHz or faster, 128 MB of RAM or more (Recommended: Pentium III 800 MHz or faster and 256 MB of RAM or more) Hard Disk: Disk space required for installation—200 MB or more Display: Screen resolution; 800 × 600 dots or more Colors; High Color (16-bit color, 65,000 colors) or more,

Installing the supplied software

You can install the supplied software using the following procedure. 4 Follow the instructions on the • When using Windows 2000/Me, do not connect screen to complete the the camera to the computer before installation. • In Windows 2000/XP, log on as Administrator. installation. • When the supplied software is installed, the When the restarting confirmation USB driver is installed automatically. message appears, restart the computer following the instructions on the screen. 1 Turn on your computer, and insert the CD-ROM (supplied) into the 5 Remove the CD-ROM after the CD-ROM drive. installation is complete. The installation menu screen appears. • If it does not appear, double-click (My Computer) t (CYBERSHOTSOFT). 2 Click [Install]. The “Choose Setup Language” screen appears. 3 Select the desired language, then click [Next]. The “License Agreement” screen appears. Read the agreement carefully. If you accept the terms of the agreement, click the radio button next to [I accept the terms of the license agreement] and then click [Next].,

Copying images to your computer

This section describes the process using a Using your computer Windows computer as an example. 2 Insert batteries with enough You can copy images from the camera to capacity in the camera, or your computer as follows. connect the camera to a wall

For a computer with a “Memory Stick” outlet (wall socket) with the AC

slot Adaptor (not supplied). Remove the “Memory Stick Duo” from the camera and insert it in the Memory Stick Duo Adaptor. Insert the Memory Stick Duo Adaptor in the computer and copy the images.

For a computer without a “Memory Stick” slot

Follow Stages 1 through 4 on pages 55 to 59 to copy images. • When using Windows 2000/Me, install the supplied software before proceeding. With Windows XP, the installation is unnecessary. • The screen displays shown in this section are the examples for copying images from “Memory Stick Duo”. • When you copy images to your computer

Stage 1: Preparing the camera using batteries, copying may fail or image

and the computer data may become corrupted if the batteries shut down too soon. 1 Insert a “Memory Stick Duo” with recorded images into the camera. 3 Set the mode switch to , then turn on the camera and the • When copying images in the internal computer. memory, this step is unnecessary.

POWER

,

Stage 2: Connecting the camera Stage 3-A: Copying images to a

and your computer computer • For Windows 2000/Me, follow the procedure explained in “Stage 3-B: Copying images to a Computer” on page 57. To the • For Windows XP, when the wizard screen does 1 not appear automatically, follow the procedure (USB) jack explained in “Stage 3-B: Copying images to a Computer” on page 57. This section describes an example of USB cable copying images to a “My Documents” folder. 1 After making a USB connection in Stage 2, click [Copy pictures to a folder on my computer using 2To a USB Microsoft Scanner and Camera connector Wizard] t [OK] as the wizard screen appears automatically on the desktop. • With Windows XP, the AutoPlay wizard appears on the desktop. “USB Mode Mass Storage” appears on the 1 screen of the camera. Access 2 indicators* The “Scanner and Camera Wizard” screen appears. When a USB connection is established for the first time, your computer automatically runs a program to recognize the camera. 2 Click [Next]. Wait for a while. * During communication, the access indicators The images saved on the “Memory turn red. Do not operate the computer until the Stick Duo” of the camera appear. indicators turn white. • If no “Memory Stick Duo” is inserted, • If “USB Mode Mass Storage” does not appear, images in the internal memory appear. set [USB Connect] to [Mass Storage] (page 50)., Using your computer 3 Click the check box of unwanted 5 Click the radio button next to images to remove the checkmark [Nothing. I'm finished working so they are not copied, then click with these pictures] to select it, [Next]. then click [Next]. 2 2 The “Picture Name and Destination” The “Completing the Scanner and screen appears. Camera Wizard” screen appears. 4 Select a name and destination for 6 Click [Finish]. the images, then click [Next]. The wizard screen closes. • To continue copying other images, disconnect the USB cable (page 59). Then 1 follow the procedure explained in “Stage 2: Connecting the camera and your computer” on page 56. 2 Stage 3-B: Copying images to a

Computer

Image copying starts. When the copying is completed, the “Other Options” • For Windows XP, follow the procedure screen appears. explained in “Stage 3-A: Copying images to a • This section describes an example of computer” on page 56. copying images to the “My Documents” This section describes an example of folder. copying images to the “My Documents” folder., 1 Double-click [My Computer] t 3 Double-click the [My Documents] [Removable Disk] t [DCIM]. folder. Then, right-click on the “My Documents” window to display the menu and click [Paste]. • If the “Removable Disk” icon is not displayed, see page 81. The image files are copied to the “My 2 Double-click the folder where the Documents” folder. image files you want to copy are • When an image with the same file name stored. Then, right-click an image exists in the copy destination folder, the file to display the menu and click overwrite confirmation message appears. When you overwrite an existing image with [Copy]. a new one, the original file data is deleted. To copy an image file to the computer without overwriting, change the file name to a different name and then copy the image file. However, note that if you change the file name (page 61), you may not be able to play back that image with your camera. • On the storage destination of the image files, see page 60., Using your computer

Stage 4: Viewing images on To delete the USB connection

your computer Perform the procedures listed below This section describes the procedure for beforehand when: viewing copied images in the “My • Disconnecting the USB cable Documents” folder. • Removing a “Memory Stick Duo” • Inserting a “Memory Stick Duo” into the camera after copying images from the internal 1 Click [Start] t [My Documents]. memory • Turning off the camera2xFor Windows 2000/Me/XP 1 Double-click on the tasktray. Double-click here 2 Click (Sony DSC) t [Stop]. The contents of the “My Documents” 3 Confirm the device on the confirmation folder are displayed. window, then click [OK]. • If you are not using Windows XP, 4 Click [OK]. double-click [My Documents] on the The device is disconnected. desktop. • Step 4 is unnecessary for Windows XP. 2 Double-click the desired image file. The image is displayed., • Image files are named as follows. ssss

Image file storage destinations stands for any number within the range from

and file names 0001 to 9999. The numerical portions of the name of a movie file recorded in movie mode The image files recorded with your camera and its corresponding index image file are the are grouped as folders on the “Memory same. Stick Duo”. – Still image files: DSC0ssss.JPG – Movie files: MOV0ssss.MPG Example: viewing folders on Windows XP – Index image files that are recorded when you record movies: MOV0ssss.THM • For more information about folders, see pages 35 and 47.

A B C

A Folder containing image data recorded using a camera not equipped with the folder creating function B Folder containing image data recorded using this camera When no new folders are created, there are folders as follows: – “Memory Stick Duo”; “101MSDCF” only – Internal memory; “101_SONY” only C Folder containing movie data, etc., recorded using a camera not equipped with the folder creating function • You cannot record any images to the “100MSDCF” folder. The images in these folders are available only for viewing. • You cannot record/playback any images to the “MSSONY” folder.,

Viewing image files stored on a computer with

your camera (using a “Memory Stick Duo”) This section describes the process using a Using your computer Windows computer as an example. 2 Copy the image file to the When an image file copied to a computer “Memory Stick Duo” folder in the no longer remains on a “Memory Stick Duo”, you can view that image again on the following order. camera by copying the image file on the 1Right-click the image file, then click computer to a “Memory Stick Duo”. [Copy]. 2Double-click [Removable Disk] or • Step 1 is not necessary if the file name set with [Sony MemoryStick] in [My your camera has not been changed. Computer]. • You may be unable to play back some images depending on the image size. 3Right-click the [sssMSDCF] folder • When an image file has been processed by a in the [DCIM] folder, then click [Paste]. computer or when the image file was recorded • sss stands for any number within the using a model other than that of your camera, range from 100 to 999. playback on your camera is not guaranteed. • When there is no folder, first create a folder with your camera (page 47) and then copy the image file. 1 Right-click the image file, then click [Rename]. Change the file name to “DSC0ssss.” Enter a number from 0001 to 9999 for ssss. • If the overwrite confirmation message appears, enter a different number. • An extension may be displayed depending on the computer settings. The extension for still images is JPG, and the extension for movies is MPG. Do not change the extension.,

Using the supplied software Using the supplied software Basic instructions

You can use still images and video from the Follow these steps to import and view camera more than ever by taking advantage images from the camera. of the software. This section summarizes the software and Importing images gives basic instructions. 1 Make sure “Media Check Tool”* is

Software overview running.

With the software you can: * “Media Check Tool” is a program that automatically detects and imports images • Import images shot with the camera and display when a “Memory Stick” is inserted or when them on the monitor. the camera is connected. • Organize images on the computer on a calendar by shooting date to view them. Look for a (Media Check Tool) icon • Retouch, print, and send still images as e-mail in the taskbar. attachments, change the shooting date, and • If there is no icon: Click [Start] t more. [Programs] (in Windows XP, [All • For details on the supplied software, refer to the Programs]) t [Sony Picture Utility] t Help. [Cyber-shot Viewer] t [Tools] t [Media Check Tool]. To access the Help, click [Start] t [Programs] (in Windows XP, [All Programs]) t [Sony Picture Utility] t 2 Connect the camera to your [Help] t [Cyber-shot Viewer]. computer with the USB cable. After the camera is automatically

Starting and exiting the software detected, the [Import Images] screen is

displayed.

Starting the software

Double-click the (Cyber-shot Viewer) icon on the desktop. Or, from the Start menu: Click [Start] t [Programs] (in Windows XP, [All Programs]) t [Sony Picture Utility] t [Cyber-shot Viewer].

Exiting the software

Click button in the top right corner of the screen. • If you will use the “Memory Stick” slot, first refer to page 55. • In Windows XP, if the AutoPlay Wizard appears, close it., Using your computer 3 Import the images. 2 Viewing images in “Viewed To start importing images, click the folders” arranged by shooting [Import] button. date on a calendar 1Click the [Calendar] tab. Years when images were shot are listed. 2Click the year. Images shot that year are displayed, arranged on the calendar by shooting By default, images are imported into a date. folder created in “My Pictures” that is 3To display images by month, click the named with the date of importing. desired month. Thumbnails of images shot that month • For instructions on changing the “Folder to are displayed. be imported”, refer to page 65. 4To display images by time, click the desired date. Thumbnails of images shot that day are

Viewing images displayed, arranged by hour.

1 Year display screenChecking imported images When importing is complete, the software starts. Thumbnails of the 1 imported images are displayed. Month display screen • The “My Pictures” folder is set as the 4 default folder in “Viewed folders”. • You can double-click a thumbnail to display the image by itself., Hour display screen Displaying images in full-screen mode To display a slide show of current images in full-screen mode, click the button. • To list images from a particular year or month, click that period on the left of the screen. • To play or pause the slide show, click the 3 button on the lower left of the screen. Displaying individual images • To stop the slide show, click the button on On the hour display screen, double-click the lower left of the screen. a thumbnail to display the image by itself in a separate window. • You can edit displayed images by clicking the toolbar button., Using your computer

Other software functions Changing the “Folder to be imported”

To change the “Folder to be imported”,

Preparing images stored on the access the “Import Settings” screen.

computer for viewing To display the “Import Settings” screen, You can view images previously stored on choose [Image Import Settings...] from the the computer with the software. To view [File] menu. them, register the folder that contains the images as one of the “Viewed folders”. 1 From the [File] menu, choose [Register Viewered Folders...] to display the settings screen for “Viewed folders” registration. 1 Choose the “Folder to be imported”. • You can specify the “Folder to be imported” from folders registered as “Viewed folders.”

Updating image registration

2 information To update image information, choose Click the [Add...] button, and then specify [Update Database] from the [Tools] menu. the folder with images for importing to • Updating the database may take a while. register the folder as a “Viewed folder.” • If you rename image files or folders in “Viewed • Images in any subfolders of “Viewed folders” folders”, they cannot be displayed with this are also registered. software. In this case, update the database.

Technical Support

Additional information on this product and answers to frequently asked questions can be found at the Sony Customer Support Website. http://www.sony.net/,

Using your Macintosh computer

You can copy images to your computer. • The supplied software is not compatible with Copying and viewing images on Macintosh computers. a computer

Recommended computer 1 Prepare the camera and a

environment Macintosh computer. The following environment is Perform the same procedure as that recommended for a computer connected to described in “Stage 1: Preparing the the camera. camera and the computer” on page 55.

Recommended environment for

copying images 2 Connect the USB cable. OS (pre-installed): Mac OS 9.1, 9.2 or Mac Perform the same procedure as that OS X (v10.0 or later) described in “Stage 2: Connecting the USB connector: Provided as standard camera and your computer” on page 56.

Notes on connecting your camera to a

computer 3 Copy image files to the Macintosh • Operations are not guaranteed for all the computer. recommended computer environments mentioned above. 1Double-click the newly recognized icon • If you connect two or more USB devices toat[DCIM] t the folder where the single computer at the same time, some devices, images you want to copy are stored. including your camera, may not operate 2Drag and drop the image files to the depending on the types of USB devices you are hard disk icon. using. The image files are copied to the hard • Operations are not guaranteed when using a disk. USB hub. • For details on the storage location of the • Connecting your camera using a USB interface images and file names, see page 60. that is compatible with Hi-Speed USB (USB 2.0 compliant) allows advanced transfer (high speed transfer) as this camera is compatible with Hi- Speed USB (USB 2.0 compliant). 4 View images on the computer. • There are three modes for a USB connection Double-click the hard disk icon t the when connecting a computer, [Auto] (default desired image file in the folder setting), [Mass Storage] and [PTP] modes. This containing the copied files to open that section describes the [Auto] and [Mass Storage] as examples. For details on [PTP], see page 50. image file. • When your computer resumes from the suspend or sleep mode, communication between your camera and your computer may not recover at the same time., Using your computer

To delete the USB connection

Perform the procedures listed below beforehand when: • Disconnecting the USB cable • Removing a “Memory Stick Duo” • Inserting a “Memory Stick Duo” into the camera after copying images from the internal memory • Turning off the camera

Drag and drop the drive icon or the

icon of the “Memory Stick Duo” to the “Trash” icon. The camera is disconnected from the computer. • If you are using Mac OS X v10.0, perform the procedure above after you have turned your computer off. Additional information on this product and answers to frequently asked questions can be found at the Sony Customer Support Website. http://www.sony.net/, Printing still images

How to print still images

When you print images shot in [16:9(HDTV)] mode, both edges may be cut off, so be sure to check before printing (page 84). Printing images directly using a PictBridge compliant printer (page 69) You can print images by connecting the camera directly to a PictBridge compliant printer. Printing directly using a “Memory Stick” compliant printer You can print images with a “Memory Stick” compliant printer. For details, see the operating instructions supplied with the printer. Printing using a computer You can copy images to a computer using the supplied software and print the images. Printing at a shop (page 73) You can take a “Memory Stick Duo” containing images shot with your camera to a photo printing service shop. You can make a (Print order) mark on images that you want to print out in advance.,

Printing images directly using a PictBridge

compliant printer Even if you do not have a computer, you Printing still images can print images shot using your camera by Stage 1: Preparing the camera connecting the camera directly to a Prepare the camera to connect it to the PictBridge compliant printer. printer with the USB cable. When connecting the camera to a printer that is recognized when [USB Connect] is set to • “PictBridge” is based on the CIPA standard. [Auto], Stage 1 is unnecessary. (CIPA: Camera & Imaging Products Association) Index button

In single-image mode

You can print a single image on a printing sheet. MENU button Control Button • It is recommended to use batteries with enough capacity or an AC Adaptor (not supplied) to

In index mode prevent the power from turning off partway through printing.

You can print several images at a reduced size on a printing sheet. You can print a set of either the same images (1) or different 1 Press MENU to display the menu. images (2). 122Press B on the control button to select (Setup). 3 Select [ ] (Setup 2) with V, then select [USB Connect] with v/V/B. • An index print function may not be provided depending on the printer. • The quantity of images that can be printed as an 4 Select [PictBridge] with B/v, then index image differ depending on the printer. press z. • You cannot print movies. • If the indicator flashes on the screen of the camera for about five seconds (error notification), check the connected printer. The USB mode is set.,

Stage 2: Connecting the camera Stage 3: Printing

to the printer Regardless of what the mode switch is set to, the print menu appears when you complete Stage 2. 1 Connect the (USB) jack on your camera and the USB jack on the printer with the supplied USB 1 Select the desired printing cable. method with v/V on the control button, then press z. To the [All In This Folder]1 (USB) jack Prints all the images in the folder. [DPOF image] Prints all the images with a (Print order) mark (page 73) regardless of the USB cable displayed image. [Select] 2To the USB jack Selects images and prints all the selected images. 1Select the image you want to print with b/B, then press z. The mark appears on the selected image. • To select other images, repeat this 2 Turn on your camera and the procedure. printer. 2Select [Print] with V, then press z. After the connection is made, [This image] the indicator appears. Prints a displayed image. • If you select [This image] and set [Index] to [On] in step 2, you can print a set of the same images as an index image. The camera is set to playback mode, then an image and the print menu appear on the screen., Printing still images 2 Select print settings with v/V/b/B. 3 Select [OK] with V/B, then press z. The image is printed. • Do not disconnect the USB cable while the (Do not disconnect the USB cable) indicator appears on the screen. [Index] indicator Select [On] to print as an index image. [Size] Select the size of the printing sheet. [Date] Select [Day&Time] or [Date] to insert the date and time on images.

To print other images

• When you choose [Date], the date will be inserted in the order you select (t step 2 in After step 3, select [Select] and the desired “Read This First”). This function may not image with v/V, then perform from step 1. be provided depending on the printer. [Quantity] To print images on the index screen When [Index] is set to [Off]: Perform “Stage 1: Preparing the camera” (page 69) and “Stage 2: Connecting the Select the number of sheets of an image camera to the printer” (page 70), then that you want to print. The image will proceed with the following. be printed as a single image. When you connect the camera to a printer, When [Index] is set to [On]: the print menu appears. Select [Cancel] to turn off the print menu, then proceed as Select the number of sets of images that follows. you want to print as an index image. If you selected [This image] in step 1, 1 Press (Index). select the number of the same image The index screen appears. you want to print side by side on a sheet 2 Press MENU to display the menu. as an index image. 3 Select (Print) with B, then press z. • The designated number of images may not all fit onto a single sheet depending on the 4 Select the desired printing method with v/ quantity of images. V, then press z., [Select] Selects images and prints all the selected images. Select the image you want to print with v/ V/b/B, then press z to display the mark. (Repeat this procedure to select other images.) Then, press MENU. [DPOF image] Prints all the images with a (Print order) mark regardless of the displayed image. [All In This Folder] Prints all the images in the folder. 5 Perform steps 2 and 3 of “Stage 3: Printing” (page 70).,

Printing at a shop

You can take a “Memory Stick Duo” Printing still images containing images shot with your camera to Marking in single-image mode a photo printing service shop. As long as the shop supports photo printing services conforming to the DPOF, you can make a (Print order) mark on images in advance so that you do not need to reselect MENU button them when you print them out at the shop. Control button • You cannot print images stored in the internal memory at a print shop directly from the camera. Copy the images to a “Memory Stick Duo”, then take the “Memory Stick Duo” to the 1 Display the image you want to print shop. print.

What is DPOF?

DPOF (Digital Print Order Format) is a function allowing you to make a (Print 2 Press MENU to display the menu. order) mark on images of “Memory Stick Duo” that you want to print out later. • You can also print the images with the 3 Select DPOF with b/B, then press (Print order) mark using a printer that conforms z. to the DPOF (Digital Print Order Format) standard or using a PictBridge compliant printer. A (Print order) mark is marked on • You cannot mark movies. the image. • When you mark images shot in [Multi Burst] mode, all the images are printed on one sheet divided into 16 panels.

When taking a “Memory Stick Duo” to

a shop • Consult your photo printing service shop as to what types of “Memory Stick Duo” they handle. • If a “Memory Stick Duo” is not handled by your 4 To mark other images, display the photo printing service shop, copy the images you want to print out to other medium such as a desired image with b/B, then CD-R and take it to the shop. press z. • Be sure to take the Memory Stick Duo Adaptor with it. • Before you take image data to a shop, always copy (back up) your data to a disk. To remove the mark in single-image • You cannot set the number of prints. mode Press z in step 3 or 4., To cancel, select [Cancel] in step 4 or select

Marking in index mode [Exit] in step 8, then press z.

1 To remove the mark in index modeDisplay the index screen (t step Select the images from which you want to 6 in “Read This First”). remove the mark in step 5, then press z. 2 To remove all the marks in the folderPress MENU to display the menu. Select [All In This Folder] in step 4, then press z. Select [Off], then press z. 3 Select DPOF with b/B, then press z. 4 Select [Select] with v/V, then press z. • You cannot add a mark in [All In This Folder]. 5 Select the image you want to mark with v/V/b/B, then press z. A green mark appears on the selected image. Green mark 6 Repeat step 5 to mark other images. 7 Press MENU. 8 Select [OK] with B, then press z. The mark turns white., Troubleshooting

Troubleshooting

If you experience trouble with your camera, try the following solutions. Troubleshooting 1 Check the items on pages 76 to 86. If a code such as “C/E:ss:ss” appears on the screen, see page 87. 2 Remove batteries, and insert batteries again after about one minute, and turn on the power. 3 Initialize the settings (page 49). 4 Consult your Sony dealer or local authorized Sony service facility. Please understand that you give your consent that the contents of the internal memory may be checked when you send your camera to be repaired.,

Batteries and power

The battery remaining indicator is incorrect, or sufficient battery remaining indicator is displayed but the power runs out too quickly. • This phenomenon occurs when you use the camera in an extremely hot or cold location (page 94). • When using alkaline batteries/Oxy Nickel Primary Battery, the displayed time remaining may not be correctly indicated. • The batteries are discharged. Install new batteries or charged Nickel-Metal Hydride batteries (t step 1 in “Read This First”). • When using the Nickel-Metal Hydride batteries, the poles of batteries or the terminals of the battery cover are dirty so the batteries are not charged sufficiently. Clean them with a cotton swab, etc. (page 93). • When using the Nickel-Metal Hydride batteries, the displayed time remaining differs from the current one due to the memory effect (page 93), etc. Fully discharge and then charge the batteries to correct the display. • The batteries are dead. Replace them with new ones. The batteries run down too quickly. • You are using the camera in an extremely cold location (page 92). • The batteries are dead. Replace them with new ones. • When using the Nickel-Metal Hydride batteries, charge them sufficiently. Cannot turn on the camera. • Install the batteries correctly (t step 1 in “Read This First”). • Properly connect the AC Adaptor (not supplied). • The batteries are discharged. Install new batteries or charged Nickel-Metal Hydride batteries (t step 1 in “Read This First”). • The batteries are dead. Replace them with new ones. The power turns off suddenly. • If you do not operate the camera for about three minutes while the power is on, the camera turns off automatically to prevent wearing down the batteries. Turn on the camera again (t step 2 in “Read This First”). • The batteries are discharged. Install new batteries or charged Nickel-Metal Hydride batteries (t step 1 in “Read This First”)., Troubleshooting

Shooting still images/movies

The screen does not turn on even when the power is turned on. • Turn on the screen (page 20). Your camera cannot record images. • Check the free capacity of the internal memory or “Memory Stick Duo” (page 21). If they are full, do one of the following: – Delete unnecessary images (t step 6 in “Read This First”). – Change the “Memory Stick Duo”. • You are using the “Memory Stick Duo” with the write-protect switch, and the switch is set to the LOCK position. Set the switch to the recording position (page 90). • You cannot record images while charging the flash. • Set the mode switch to when shooting still images. • Set the mode switch to when shooting movies. • The image size is set to [640(Fine)] when recording movies. Do one of the following: – Set the image size to other than [640(Fine)]. – Insert a “Memory Stick PRO Duo” (pages 21 and 90). The subject is not visible on the screen. • Set the mode switch to an other position than (page 24). Recording takes a long time. • The NR slow shutter function is activated (page 17). This is not a malfunction. The image is out of focus. • The subject is too close. Ensure the lens is farther from the subject than the minimum shooting distance, approximately 12 cm (4 3/4 inches) (W) or 50 cm (19 3/4 inches) (T). • (Landscape mode) or (Twilight mode) is selected in the Scene mode when shooting still images. • Refer to “If the subject is out of focus” on page 30. Zoom does not work. • You cannot change the zoom scale when shooting movies. Precision digital zoom does not function. • Set [Digital Zoom] to [Precision] (page 43). • This function cannot be used while shooting movies., Smart zoom does not function. • Set [Digital Zoom] to [Smart] (page 43). • This function cannot be used when: – The image size is set to [6M] or [3:2]. – Shooting in Multi Burst mode. – Shooting movies. The flash does not work. • The flash is set to (No flash) (t step 5 in “Read This First”). • You cannot use the flash when: – [Mode] (REC Mode) is set to [Burst] or [Multi Burst] (page 31). – (High sensitivity mode) or (Twilight mode) of the Scene mode, or is selected. • Set the flash to (Forced flash) to shoot still images when (Snow mode), (Beach mode) or (Landscape mode) is selected in the Scene mode. Indistinct, round blobs are visible on images when the flash is used. • Strong light from the flash has been reflected from dust or airborne particles. This phenomenon is not a malfunction. The date and time are recorded incorrectly. • Set the correct date and time (t step 2 in “Read This First”). The F value and shutter speed flash when you press and hold the shutter button halfway down. • The exposure is incorrect. Correct the exposure (page 28). The image is too dark. • You are shooting a subject with a light source behind the subject. Select the metering mode (t step 5 in “Read This First”) or adjust the exposure (page 28). • Turn on the screen (page 20). The image is too bright. • You are shooting a spotlighted subject in a dark location such as on a stage. Adjust the exposure (page 28). The image colors are not correct. • Picture Effect function is activated. Cancel the Picture Effect function (page 33). Vertical streaks appear when you are shooting a very bright subject. • The smear phenomenon is occurring. This phenomenon is not a malfunction., Troubleshooting Noise appears in the image when you view the screen in a dark place. • The camera is attempting to increase the visibility of the screen by temporarily brightening the image under conditions of low illumination. There is no effect on the recorded image. The eyes of the subject come out red. • Set [Red Eye Reduction] in the (Setup) menu to [On] (page 44). • Shoot the subject at a distance closer than the recommended shooting distance using the flash (t step 5 in “Read This First”). • Light the room and shoot the subject. The image seen through the finder does not indicate the actual recordable range. • The parallax phenomenon is occurring when the subject is close. To confirm the recordable range, use the LCD screen. Dots appear and remain on the screen. • This is not a malfunction. These dots are not recorded (page 5, t “Read This First”). Cannot shoot images in succession. • The internal memory or the “Memory Stick Duo” is full. Delete unnecessary images (t step 6 in “Read This First”). • The battery level is low. Install new batteries or charged Nickel-Metal Hydride batteries (t step 1 in “Read This First”).

Viewing images

Refer to “Computers” (page 81) in conjunction with the following items. Your camera cannot play back images. • Set the mode switch to (page 24). • The folder/file name has been changed on your computer (page 61). • When an image file has been processed by a computer or when the image file was recorded using a model other than that of your camera, playback on your camera is not guaranteed. • The camera is in USB mode. Delete the USB connection (pages 59 and 67). The image appears rough right after playback starts. • The image may appear rough right after playback starts due to image processing. This is not a malfunction. Color unevenness may appear during video playback. • This is not a malfunction. Recorded images will not be affected.,

Deleting/Editing images

Your camera cannot delete an image. • Cancel the protection (page 37). • You are using the “Memory Stick Duo” with the write-protect switch, and the switch is set to the LOCK position. Set the switch to the recording position (page 90). You have deleted an image by mistake. • Once you have deleted an image, you cannot restore it. We recommend that you protect images (page 36), or use the “Memory Stick Duo” with the write-protect switch and set the switch to the LOCK position (page 90) to prevent accidental erasure. The resizing function does not work. • You cannot resize movies and Multi Burst images. You cannot display a DPOF (Print order) mark. • You cannot display DPOF (Print order) marks on movies. You cannot cut a movie. • The movie is not long enough to cut (shorter than about two seconds). • Cancel the protection (page 37). • Still images cannot be cut., Troubleshooting

Computers

You do not know if the OS of your computer is compatible with the camera. • Check “Recommended computer environment” on page 53 for Windows, and page 66 for Macintosh. Your computer does not recognize your camera. • Turn on the camera (t step 2 in “Read This First”). • When the battery level is low, install new batteries or charged Nickel-Metal Hydride batteries (t step 1 in “Read This First”), or use the AC Adaptor (not supplied) (page 15). • Use the supplied USB cable (page 56). • Disconnect the USB cable from both the computer and the camera, and connect it again firmly. Make sure that “USB Mode Mass Storage” is displayed (page 56). • Set [USB Connect] to [Mass Storage] in the (Setup) menu (page 50). • Disconnect all equipment other than the camera, the keyboard and the mouse from the USB connectors of your computer. • Connect the camera directly to your computer without passing through a USB hub or other device (page 56). • The supplied software is not installed. Install the supplied software (page 54). • Your computer does not properly recognize the device because you connected the camera and your computer with the USB cable before you installed the supplied software. Delete the erroneously recognized device from your computer, then install the supplied software (see the next item). The “Removable disk” icon does not appear on the computer screen when you connect your computer to the camera. • Follow the procedure below to install the USB driver again. The following procedure is for a Windows computer. 1 Right-click [My Computer] to display the menu, then click [Properties]. The “System Properties” screen appears. 2 Click [Hardware] t [Device Manager]. • For Windows Me, click the [Device Manager] tab. The “Device Manager” appears. 3 Right-click [ Sony DSC], then click [Uninstall] t [OK]. The device is deleted. 4 Install the supplied software (page 54). You cannot copy images. • Connect the camera and your computer correctly using the supplied USB cable (page 56). • Follow the designated copy procedure for your OS (pages 56 and 66). • When you shoot images with a “Memory Stick Duo” formatted by a computer, you may not be able to copy the images to a computer. Shoot using a “Memory Stick Duo” formatted by your camera (page 47)., After making a USB connection, the supplied software does not start automatically. • Start up the “Media Check Tool” (page 62). • Make the USB connection after the computer is turned on (page 56). The image cannot be played back on a computer. • When using the supplied software, refer to the Help. • Consult the computer or software manufacturer. The image and sound are interrupted by noise when you view a movie on a computer. • You are playing back the movie directly from the internal memory or the “Memory Stick Duo”. Copy the movie to the hard disk of your computer, then play back the movie from the hard disk (page 55). You cannot print an image. • Check the printer settings. Images once copied to a computer cannot be viewed on the camera. • Copy them to a folder recognized by the camera, such as “101MSDCF” (page 60). • Operate correctly (page 61). Images are not displayed correctly with the supplied software. • Make sure the folder of the images is registered in “Viewed folders”. If the images are not displayed even if the folder is registered in “Viewed folders”, update the database (page 65). You cannot find images imported with the supplied software. • Look in the “My Pictures” folder. • If you have changed the default settings, refer to “Changing the “Folder to be imported”” on page 65 and check what folder is used for importing. You want to change the “Folder to be imported”. • Access the “Import Settings” screen to change “Folder to be imported”. You can specify a different folder after using the software to register it in “Viewed folders” (page 65). All imported images are displayed on the calendar with the date January 1. • The date has not been set on the camera. Set the date on the camera., Troubleshooting “Memory Stick Duo” Cannot insert a “Memory Stick Duo”. • Insert it in the correct direction (t step 3 in “Read This First”). Cannot record on a “Memory Stick Duo”. • You are using the “Memory Stick Duo” with the write-protect switch, and the switch is set to the LOCK position. Set the switch to the recording position (page 90). • The “Memory Stick Duo” is full. Delete unnecessary images (t step 6 in “Read This First”). • Insert a “Memory Stick PRO Duo” (page 21) when recording movies with the image size set to [640(Fine)]. Cannot format a “Memory Stick Duo”. • You are using the “Memory Stick Duo” with the write-protect switch, and the switch is set to the LOCK position. Set the switch to the recording position (page 90). You have formatted a “Memory Stick Duo” by mistake. • All the data on the “Memory Stick Duo” is deleted by formatting. You cannot restore it. We recommend that you set the write-protect switch on the “Memory Stick Duo” to the LOCK position to prevent accidental erasure (page 90). “Memory Stick PRO Duo” is not recognized by a computer with a “Memory Stick” slot. • Check whether the computer and the card reader support “Memory Stick PRO Duo”. Users of computers and card readers made by companies other than Sony should contact those manufacturers. • If “Memory Stick PRO Duo” is not supported, connect the camera to the computer (pages 55 to 56). The computer recognizes the “Memory Stick PRO Duo”.

Internal memory

The camera or your computer cannot play back the data in the internal memory. • There is a “Memory Stick Duo” inserted in the camera. Remove it (t step 4 in “Read This First”). Cannot record images using the internal memory. • There is a “Memory Stick Duo” inserted in the camera. Remove it (t step 4 in “Read This First”)., The free capacity of the internal memory does not increase even when you copy the data stored in the internal memory to a “Memory Stick Duo”. • The data is not deleted after copying. Execute the [Format] command (page 46) to format the internal memory after copying the data. Cannot copy the data stored in the internal memory to a “Memory Stick Duo”. • The “Memory Stick Duo” is full. Check the capacity (32 MB or more recommended). Cannot copy the data on the “Memory Stick Duo” or the computer to the internal memory. • Data on a “Memory Stick Duo” or a computer cannot be copied to the internal memory.

Printing

Also see “PictBridge compliant printer” (as follows) in conjunction with the following items. Images are printed with both edges cut off. • When you print an image shot with the image size set to [16:9(HDTV)], both edges of the image may be cut off. • When printing images using your own printer, try canceling the trimming or borderless settings. Consult the printer manufacturer as to whether the printer provides these functions or not. • When having images printed at a digital print shop, ask the shop whether they can print the images without cutting off both edges.

PictBridge compliant printer

A connection cannot be established. • The camera cannot be connected directly to a printer that is not compliant with the PictBridge standard. Consult the printer manufacturer as to whether the printer is compliant with PictBridge or not. • Check that the printer is turned on and can be connected to the camera. • Set [USB Connect] to [PictBridge] in the (Setup) menu (page 50). • Disconnect and connect the USB cable again. If an error message is indicated on the printer, refer to the operating instructions supplied with the printer., Troubleshooting Cannot print images. • Check that the camera and the printer are properly connected using the USB cable. • Turn on the printer. For further information, refer to the operating instructions supplied with the printer. • If you select [Exit] during printing, images may not print. Disconnect and connect the USB cable again. If you still cannot print your images, disconnect the USB cable, turn the printer off and then on, then connect the USB cable again. • Movies cannot be printed. • Images shot using cameras other than this camera or images modified with a computer may not be printed. Printing is canceled. • You disconnected the USB cable before the (Do not disconnect USB cable) mark disappears. Cannot insert the date or print images in the index mode. • The printer does not provide these functions. Consult the printer manufacturer as to whether the printer provides these functions or not. • The date may not be inserted in the index mode depending on the printer. Consult the printer manufacturer. “- - -” is printed on the date-inserted part of the image. • Images that do not have the recording data cannot be printed with the date inserted. Set [Date] to [Off] and print the image again (page 71). Cannot select the print size. • Consult the printer manufacturer as to whether the printer can provide the desired size. Cannot print the image at the size selected. • Disconnect the USB cable and reconnect it whenever you change the paper size after the printer has been connected to the camera. • The print setting of the camera differs from that of the printer. Change the setting of either the camera (page 71) or the printer. Cannot operate the camera after canceling printing. • Wait for a while as the printer is carrying out the cancellation. It may take some time depending on the printer.,

Others

Your camera does not work. • Use the type of batteries you can use with this camera (page 92). • The battery level is low (The E indicator appears). Install new batteries or charged Nickel- Metal Hydride batteries (t step 1 in “Read This First”). The power is on, but the camera does not work. • The built-in microcomputer is not working properly. Remove the batteries, and then, after one minute, insert the batteries and turn on the camera. Cannot identify an indicator on the screen. • See page 16. The lens gets fogged. • Moisture condensation has occurred. Turn off the camera and leave it for about an hour before using it (page 94). The camera becomes warm when you use it for a long time. • This is not a malfunction. The lens does not move when you turn off the camera. • The batteries are discharged. Install new batteries or charged Nickel-Metal Hydride batteries (t step 1 in “Read This First”) or use the AC Adaptor (not supplied). The Clock Set screen appears when you turn on the camera. • Set the date and time again (t step 2 in “Read This First”).,

Warning indicators and messages

Troubleshooting

Self-diagnosis display Messages

If a code starting with a letter of the If the following messages appear, follow alphabet appears, your camera has a self- the instructions. diagnosis display. The last two digits (indicated by ss) will differ depending on the state of the camera. Turn the power off and on again If you are unable to solve the problem even • A problem with the lens has caused an after trying the following corrective actions error. a few times, contact your Sony dealer or local authorized Sony service facility. E • The battery level is low. Install new C:32: ones or charged Nickel-Metal Hydride ss batteries (t step 1 in “Read This • There is trouble with your camera’s First”). Depending on the conditions of hardware. Turn the power off and on use or the type of battery, the indicator again. may flash even though there are still 5 to 10 minutes of remaining battery time C:13: left.ss • The camera cannot read or write data on the “Memory Stick Duo”. Turn the System error power off and then on again and re- • Turn the power off and then on again insert the “Memory Stick Duo” several (t step 2 in “Read This First”). times. • The internal memory has experienced a format error, or an unformatted Internal memory error “Memory Stick Duo” is inserted. • Turn the power off and then on again Format the internal memory or the (t step 2 in “Read This First”). “Memory Stick Duo” (pages 46 and 47). • The inserted “Memory Stick Duo” Reinsert the Memory Stick cannot be used with your camera, or the • Insert the “Memory Stick Duo” data is damaged. Insert a new “Memory correctly. Stick Duo” (page 90). • The inserted “Memory Stick Duo” cannot be used in your camera E:61: (page 90).ss • The “Memory Stick Duo” is damaged. E:91:ss • The terminal section of the “Memory Stick Duo” is dirty. E:92:ss • A camera malfunction has occurred. Memory Stick type error Initialize the camera (page 49), then • The inserted “Memory Stick Duo” turn the power on again. cannot be used in your camera (page 90)., Format error Cannot create more folders • Format the media again (pages 46 and • The folder with a name beginning with 47). “999” exists on the “Memory Stick Duo”. You cannot create any folders if this is the case. Memory Stick locked • You are using the “Memory Stick Duo” with the write-protect switch, and the Cannot record switch is set to the LOCK position. Set • The camera cannot record images in the the switch to the recording position selected folder. Select a different folder (page 90). (page 48). No memory space in internal File error memory • An error occurred while playing back No memory space in Memory Stick the image. • Delete unnecessary images or files (t step 6 in “Read This First”). File protect • Release the protection (page 37). Read only memory • Your camera cannot record or delete images on this “Memory Stick Duo”. Image size over • You are playing back an image of a size that cannot be played back on your No file camera. • No images have been recorded in the internal memory. Cannot divide • The movie is not long enough to be No file in this folder divided (shorter than about two • No images have been recorded in this seconds). folder. • The file is not a movie. • You did not operate correctly when copying images from your computer (page 61). Invalid operation • You are playing back a file that is not compatible with this camera. Folder error • A folder with the same first three digit number already exists on the “Memory (Vibration warning indicator) Stick Duo” (For example: 123MSDCF • Camera shake may occur due to and 123ABCDE). Select another folder, insufficient light. Use the flash, mount or create a new folder (page 47). the camera on a tripod, or otherwise secure the camera in place., Troubleshooting 640(Fine) is not available Printer error • 640(Fine) size movies can be recorded • Check the printer. only using a “Memory Stick PRO Duo”. • Check if the image you want to print is Insert a “Memory Stick PRO Duo” or corrupted. set the image size to a size other than [640(Fine)]. Enable printer to connect • The data transmission to the printer may not be completed yet. Do not disconnect • [USB Connect] is set to [PictBridge], the USB cable. however the camera is connected to a non-PictBridge compliant device. Check the device. Processing • The connection is not established. • The printer is canceling the current print Disconnect and connect the USB cable job. You cannot print until it is finished. again. If an error message is indicated This may take time, depending on the on the printer, refer to the operating printer. instructions supplied with the printer. Connect to PictBridge device • You tried to print images before the printer connection was established. Connect to a PictBridge compliant printer. No printable image • You tried to execute [DPOF image] without placing a DPOF (Print order) mark on the image(s). • You tried to execute [All In This Folder] while a folder that holds only movies was selected. You cannot print movies. Printer busy Paper error No Paper Ink error Low Ink No Ink • Check the printer., Others

On the “Memory Stick”

A “Memory Stick” is a compact, portable Notes on using a “Memory Stick Duo” IC recording medium. The types of (not supplied) “Memory Stick” that can be used with this • You cannot record, edit or delete images if you camera are listed in the table below. slide the write-protect switch to LOCK with a However, proper operation cannot be fine-tipped object. guaranteed for all “Memory Stick” functions. Terminal “Memory Stick” type Recording/ Playback Write-protect Memory Stick (without — switch MagicGate) Memo area Memory Stick (with — MagicGate) Some “Memory Stick Duo” cards do not Memory Stick Duo (without a have a write-protect switch. On “Memory MagicGate) Stick Duo” with this switch, the position Memory Stick Duo (with *1*2 and shape may vary depending on the a MagicGate) “Memory Stick Duo”. MagicGate Memory Stick — • Do not remove the “Memory Stick Duo” while reading or writing data. MagicGate Memory Stick a*1 • Data may be corrupted in the following cases: Duo – When the “Memory Stick Duo” is removed or Memory Stick PRO — the camera is turned off during a read or write *1*2*3 operationMemory Stick PRO Duo a – When the “Memory Stick Duo” is used in *1 locations subject to static electricity or “Memory Stick Duo”, “MagicGate Memory electrical noise Stick Duo” and “Memory Stick PRO Duo” are equipped with MagicGate functions. • We recommend backing up important data. MagicGate is copyright protection technology • Do not press down hard when you write down that uses encryption technology. Data on the memo area. recording/playback that requires MagicGate • Do not attach a label on the “Memory Stick functions cannot be performed with this Duo” itself nor on a Memory Stick Duo camera. Adaptor. *2 Supports high-speed data transfer using a • When you carry or store the “Memory Stick parallel interface. Duo”, put it in the case supplied with it. *3 640(Fine) size movies can be recorded. • Do not touch the terminal section of the “Memory Stick Duo” with your hand or a metal • A “Memory Stick Duo” formatted with a object. computer is not guaranteed to operate with this • Do not strike, bend or drop the “Memory Stick camera. Duo”. • Data read/write speeds differ depending on the • Do not disassemble or modify the “Memory combination of the “Memory Stick Duo” and Stick Duo”. the equipment used. • Do not expose the “Memory Stick Duo” to water. • Do not leave the “Memory Stick Duo” within the reach of small children. They might accidentally swallow it., Others • Do not use or store the “Memory Stick Duo” under the following conditions: – High temperature locations such as the hot interior of a car parked in direct sunlight – Locations exposed to direct sunlight – Humid locations or locations with corrosive substances present

Notes on using the Memory Stick Duo Adaptor (not supplied)

• To use a “Memory Stick Duo” with a “Memory Stick” compliant device, be sure to insert the “Memory Stick Duo” into a Memory Stick Duo Adaptor. If you insert a “Memory Stick Duo” into a “Memory Stick” compliant device without a Memory Stick Duo Adaptor, you might not be able to remove it from the device. • When inserting a “Memory Stick Duo” into a Memory Stick Duo Adaptor, make sure the “Memory Stick Duo” is inserted facing in the correct direction, then insert it all the way in. Incorrect insertion may result in a malfunction. • When using a “Memory Stick Duo” inserted into a Memory Stick Duo Adaptor with a “Memory Stick” compliant device, make sure that the Memory Stick Duo Adaptor is inserted facing the correct direction. Note that improper use may damage the equipment. • Do not insert a Memory Stick Duo Adaptor into a “Memory Stick” compliant device without a “Memory Stick Duo” attached. Doing so may result in malfunction of the unit.

Note on using “Memory Stick PRO Duo” (not supplied)

“Memory Stick PRO Duo” with a capacity up to 2 GB have been confirmed to operate properly with this camera.,

On the batteries Batteries you can and cannot use with your camera

Battery type supplied supported rechargeable R6 (size AA) alkaline batteriesaa— HR 15/51:HR6 (size AA) Nickel-Metal Hydride — a a batteries* ZR6 (size AA) Oxy Nickel Primary Battery — a — Manganese batteries** — — — Lithium batteries** — — — Ni-Cd batteries** — — — * NH-AA-2DB twin pack, etc. ** Operating performance cannot be ensured if voltage drops or other problems are caused by the nature of the battery.

On alkaline batteries/Oxy Nickel Primary Battery

• Alkaline batteries/Oxy Nickel Primary Battery are not rechargeable. • Alkaline batteries/Oxy Nickel Primary Battery have a shorter life compared to the Nickel-Metal Hydride batteries. For this reason, the power may turn off even though the battery remaining indicator shows sufficient battery life remaining. • Battery performance differs greatly depending on the manufacturer and the type of battery, and in some cases the battery life may be extremely short. This is especially true at low temperatures, and you may not be able to shoot at temperatures below 5°C (41°F). • Do not mix new and old batteries. • The battery remaining indicator may not display the correct information when using alkaline batteries/ Oxy Nickel Primary Battery. • Due to characteristics of alkaline batteries/Oxy Nickel Primary Battery, there is a large difference between the available shooting time and the available playback time. For this reason, the camera may turn off with the lens portion extended when you switch the mode switch. In this case, replace the batteries with new ones. Using the Nickel-Metal Hydride batteries allows you to shoot for longer periods of time.,

Others On Nickel-Metal Hydride batteries

• Do not peel off the external seals or damage the batteries. Never use batteries from which the seals have been partially or completely removed, or batteries that have been split in any way. These may cause leakage, explosion, or heat-up of the battery, and personal scald or injury may be caused. These may cause a malfunction of the battery charger. • Do not carry or store the Nickel-Metal Hydride batteries with metallic objects. Since metallic objects may short the + and – ends, resulting in the risk of heating or fire. • If the poles of the Nickel-Metal Hydride batteries are dirty, the batteries may not charge properly. Wipe them with a dry cloth, etc. • At the time of purchase, or when the Nickel-Metal Hydride batteries have not been used for a long time, they may not full charge. This is typical of this type of battery, and is not a malfunction. If this happens, repeatedly using up the batteries fully, and then recharging them should correct the problem. • If you recharge Nickel-Metal Hydride batteries before fully using up the existing charge, the low battery warning may be displayed sooner than expected. This is called the “memory effect.”* If this problem occurs, charging the batteries only after using up the existing charge will correct it. * The “memory effect” – the situation in which the capacity of the battery is temporarily lowered. • To use up the batteries completely, put the camera in the slide show mode (page 37) and leave it that way until the batteries are used up. • Do not mix new and used batteries. • Do not expose the battery to water. The battery is not water-resistant.,

Precautions

x Do not leave the camera in the x On moisture condensation following places If the camera is brought directly from a cold to a • In an extremely hot place warm location, moisture may condense inside or In places such as in a car parked in the sun, the outside the camera. This moisture condensation camera body may become deformed and this may cause a malfunction of the camera. may cause a malfunction. • Under direct sunlight or near a heater Moisture condensation occurs easily The camera body may become discolored or when: deformed, and this may cause a malfunction. • The camera is brought from a cold location such • In a location subject to rocking vibration as a ski slope into a warmly heated room. • Near strong magnetic place • The camera is taken from an air-conditioned room or car interior to the hot outdoors, etc. • In sandy or dusty places Be careful not to let sand or dust get into the camera. This may cause the camera to How to prevent moisture condensation malfunction, and in some cases this malfunction When bringing the camera from a cold place to a cannot be repaired. warm place, seal the camera in a plastic bag and allow it to adapt to conditions at the new location x On cleaning over about an hour. Cleaning the LCD screen If moisture condensation occurs Wipe the screen surface with an LCD cleaning kit (not supplied) to remove fingerprints, dust, etc. Turn off the camera and wait about an hour for the moisture to evaporate. Note that if you attempt to shoot with moisture remaining inside the lens, you Cleaning the lens will be unable to record clear images. Wipe the lens with a soft cloth to remove fingerprints, dust, etc. x On the internal rechargeable battery Cleaning the camera surface This camera has an internal rechargeable battery Clean the camera surface with a soft cloth slightly for maintaining the date and time and other moistened with water, then wipe the surface with settings regardless of whether the power is on or a dry cloth. Do not use the following as they may off. damage the finish or the casing. This rechargeable battery is continually charged • Chemical products such as thinner, benzine, as long as you are using the camera. However, if alcohol, disposable cloths, insect repellent, you use the camera for only short periods, it sunscreen or insecticide, etc. discharges gradually, and if you do not use the • Do not touch the camera with the above on your camera at all for about one month it becomes hand. completely discharged. In this case, be sure to • Do not leave the camera in contact with rubber charge this rechargeable battery before using the or vinyl for a long time. camera. However, even if this rechargeable battery is not x On operating temperatures charged, you can still use the camera as long as Your camera is designed for use under the you do not record the date and time. temperatures between 0°C and 40°C (32°F and 104°F). (In case of alkaline batteries/Oxy Nickel Charging method Primary Battery, the temperatures are between Insert batteries with enough capacity in the 5°C and 40°C (41°F and 104°F).) Shooting in camera, or connect the camera to a wall outlet extremely cold or hot places that exceed this range (wall socket) using the AC Adaptor (not is not recommended. supplied), and leave the camera for 24 hours or more with the power off.,

Specifications Camera [Power, general]

Others [System] Power R6 (size AA) Alkaline batteries (2), 3 V Image device 7.18 mm (1/2.5 type) color HR 15/51:HR6 (size AA) CCD, Primary color filter Nickel-Metal Hydride batteries Total pixel number of camera (2, not supplied), 2.4 V Approx. 6 183 000 pixels ZR6 (size AA) Oxy Nickel Primary Battery (2, not Effective pixel number of camera supplied), 3 V Approx. 6 003 000 pixels AC-LS5K AC Adaptor (not Lens Carl Zeiss Vario-Tessar supplied), 4.2 V 3× zoom lens Power consumption f = 5.1 – 15.3 mm (31 – 93 mm (during shooting with the LCD screen on) when converted to a 35 mm still camera) 1.0 W F2.8 – 5.1 Operating temperature Automatic ND filter switching 0°C to +40°C (+32°F to Exposure control Automatic exposure, Scene +104°F) Selection (7 modes) Storage temperature White balance Automatic, Daylight, Cloudy, –20°C to +60°C (–4°F to Fluorescent, Incandescent +140°F) File format (DCF compliant) Dimensions 99.9×52.0×36.8 mm Still images: Exif Ver. 2.21 (4×2 1/8×1 1/2 inches) JPEG compliant, DPOF (W/H/D, excluding protrusions) compatible Mass Approx. 181 g (6.4 oz) Movies: MPEG1 compliant (including two batteries and (Monaural) wrist strap, etc.) Recording media Internal Memory (32 MB) Microphone Electret condenser microphone “Memory Stick Duo” Speaker Dynamic speaker Flash Recommended distance (ISO set to Auto): approx. 0.2 m to Exif Print Compatible 7.0 m (7 7/8 inches to 275 5/8 PRINT Image Matching III inches) (W)/approx. 0.5 m to Compatible 3.8 m (19 3/4 inches to 149 5/8 inches) (T) PictBridge Compatible [Input and Output connectors] Design and specifications are subject to change USB jack mini-B without notice. USB communication Hi-Speed USB (USB 2.0 compliant) [LCD screen] LCD panel 5.1 cm (2.0 type) TFT drive Total number of dots 84 960 (354×240) dots,

IInndedx ex A C E

AC Adaptor...15 Camera ... 43 Effective pixels ...95 t step 1 in “Read This CD-ROM... 54 EV...28 First” Center AF... 29 Exposure...11 Accessories supplied Change REC. Folder ... 48 Extension...60, 61 t in “Read This First” Cleaning ... 94 AE/AF lock indicator ...30 Clock Set... 51Ftstep 5 in “Read This First” Cloudy... 30 File name ...60 AF Illuminator ...44 Color ... 12 File Number...50 AF lock ...30 Compression ratio ... 13 File storage destination...60 AF Mode...43 Computer ... 52 Fine...31 AF range finder frame ...29 Copying images ... 55, 66 Flash Level ...33 AF range finder frame Macintosh ... 66 Flash mode indicator...29 Recommended t step 5 in “Read This Aperture...11 environment ... 53, 66 First” Auto adjustment mode Software... 62 Fluorescent ...30 t step 5 in “Read This Viewing image files stored Focus ...10, 29 First” on a computer with your Folder...35 camera... 61 Auto Focus...10 Changing ...48 Windows ... 52 Auto power-off function Creating...47 t step 2 in “Read This Connecting Forced flash First” Computer ... 56 t step 5 in “Read This Auto Review ...45 Printer ... 70 First” Contrast ... 33 Format ...46, 47

B Copy... 48

B&W ...33 Copying images to your H Battery computer ... 55 High sensitivity mode Battery life...23 Create REC. Folder... 47 t step 5 in “Read This First” Insert/Remove t step 1 in “Read This D Holding the camera First” t step 5 in “Read This Daylight ... 30 First” Remaining indicator Delete t step 1 in “Read This t step 6 in “Read This First” I First” Beach mode Identifying parts ...14 Digital Zoom... 43 t step 5 in “Read This Image file storage destinations First” Divide... 39 and file names ...60 Beep...49 DPOF ... 73 Image quality...12, 31 t step 5 in “Read This Image size...12 First” t step 4 in “Read This Blur...10 First” Burst ...31 Incandescent ...30,

Index

Index mode printing...69 Menu ... 26 Playback/Edit...24 Index screen Items... 27 Precautions ...94 t step 6 in “Read This Shooting ... 28 Precision digital zoom ...43 First” Viewing... 35 Pressing halfway down ...10 Indicator... see “Screen” Metering Mode t step 5 in “Read This Initialize ...49 t step 5 in “Read This First” Install ...54 First” Print ...68 Internal memory...22 Mode ... 31 Index mode...69 Internal Memory Tool...46 Moisture condensation ... 94 Single-image mode...69 Internal rechargeable Monitor... 43 Print order mark...73 battery...94 Monochrome ... 33 Printing at a shop ...73 Interval ...32 MPG ... 60 Printing directly ...69 ISO...11, 31 Multi AF... 29 Program auto shooting...24

J Multi Burst ... 31 Protect...36

Multi-pattern metering PTP ...50 JPG...60 t step 5 in “Read This First”

L Multipoint AF ... 29 Q

Quick Review Landscape mode

N t step 5 in “Read This t step 5 in “Read This First”

First” NR slow shutter... 17 Language...49 Number of images/RecordingRtstep 2 in “Read This time ... 21 First” REC Mode ...31 LCD screen ... see “Screen” O Red Eye Reduction ...44 Resize ...38

M Optical zoom ... 43 Rewind/Fast forward

OS... 53, 66 t step 6 in “Read This M AF...43 Overexposure ... 11 First” Macintosh computer ...66 Rotate...39 Recommended P environment ...66 P.Effect ... 33 S Mass Storage...50 P.Quality ... 31 S AF...43 “Memory Stick Duo”...90 Parallax... 79 Saturation...33 Insert/Remove t step 3 and 4 in “Read PC... see “Computer” Scene Selection...25 This First” PFX ... 33 t step 5 in “Read This Number of images/ PictBridge... 50, 69 First” recording time...21 Picture effect ... 33 Screen Write-protect switch...90 Pixel... 12 Changing the display...20 Memory Stick Tool ...47 Playback zoom Indicator ...16 t step 6 in “Read This Self-diagnosis display...87 First” Playback ... see “Viewing”, Self-timer Spot metering cross hairsWtstep 5 in “Read This t step 5 in “Read This First” First” Warning indicators and messages ...87 Sepia ...33 Spot metering Set the clock t step 5 in “Read This WB ...30 t step 2 in “Read This First” White balance ...30 First” Standard ... 31 Windows computer...52 Setup...34, 41, 42 Recommended Camera ...43 T environment...53 Internal Memory Tool ...46 Trimming ... 41 Wrist strap t in “Read This First” Memory Stick Tool ...47 Troubleshooting ... 75 Write-protect switch ...90 Setup 1...49 Twilight mode t step 5 in “Read This Setup 2...50 First” Z Setup 1 ...49 Twilight portrait mode Zoom Setup 2 ...50 t step 5 in “Read This t step 5 in “Read This Sharpness...34 First” First” Shooting MovieUtstep 5 in “Read This Underexposure ... 11 First” USB cable ... 56, 70 Still image USB Connect ... 50 t step 5 in “Read This First” Shooting menu...28 V Shooting movies VGA t step 5 in “Read This t step 4 in “Read This First” First” Shutter speed ...11 Viewing Single...43 Movie t step 6 in “Read This Single-image mode First” printing ...69 Still image Slide...37 t step 6 in “Read This Slow synchro First” t step 5 in “Read This Viewing menu ... 35 First” Volume Smart zoom...43 t step 6 in “Read This Snow mode First” t step 5 in “Read This First” Soft snap mode t step 5 in “Read This First” Software...62 Specifications ...95,

Trademarks

• is a trademark of Sony Corporation. • “Memory Stick”, , “Memory Stick PRO”, , “Memory Stick Duo”, , “Memory Stick PRO Duo”, , “MagicGate”, and are trademarks of Sony Corporation. • Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. • Macintosh and Mac OS are trademarks or registered trademarks of Apple Computer, Inc. • Intel, MMX, and Pentium are trademarks or registered trademarks of Intel Corporation. • In addition, system and product names used in this manual are, in general, trademarks or registered trademarks of their respective developers or manufacturers. However, the ™ or ® marks are not used in all cases in this manual.,

Reverse 987692241.pdf Revision History

Ver. Date History Contents S.M. Rev. issued 1.0 2005.12 Official Release — — DSC-S600_L1]
15

Similar documents

SPECIFICATIONS Camera [Power, general] Cyber-shot Station CSS-SA
DSC-S60/S80/S90/ST80 SERVICE MANUAL LEVEL 1 DSC-S60/S90 Ver 1.1 2005.07 US Model Canadian Model Revision History Chinese Model Tourist Model DSC-S60/S80/S90/ ST80 AEP Model UK Model E Model Hong Kong Model DSC-S60/S80/S90 Australian Model Korea Model DSC-S90 Photo: DSC-S90/Silver Argentine Model Lin
SPECIFICATIONS Camera [Power, general] Cyber-shot Station CSS-SA
DSC-S60/S80/S90/ST80 SERVICE MANUAL LEVEL 2 DSC-S60/S90 Ver 1.0 2005.03 US Model Canadian Model Revision History Chinese Model Tourist Model DSC-S60/S80/S90/ How to use Acrobat Reader ST80 AEP Model UK Model E Model Hong Kong Model DSC-S60/S80/S90 Australian Model Korea Model DSC-S90 Photo: DSC-S90/
SPECIFICATIONS Camera [Power, general] Cyber-shot Station CSS-SA
DSC-S60/S80/S90/ST80 SERVICE MANUAL LEVEL 2 DSC-S60/S90 Ver 1.1 2005.07 US Model Canadian Model Revision History Chinese Model Tourist Model DSC-S60/S80/S90/ How to use Acrobat Reader ST80 AEP Model UK Model E Model Hong Kong Model DSC-S60/S80/S90 Australian Model Korea Model DSC-S90 Photo: DSC-S90/
Supplied accessories
DSC-S70 SERVICE MANUAL US Model Canadian Model Level 2 Ver. 1.2 2001.07 AEP Model UK Model E model Hong Kong Model Australian Model Chinese Model Korea Model Tourist Model Japanese Model This service manual contains information for Japanese model as well. On the SY-58 board SY-58 board This service
SAFETY-RELATED COMPONENT WARNING!!
DSC-S75 SERVICE MANUAL AEP Model UK Model Level 1 Ver 1.2 2001. 11 SPECIFICATIONS System Flash General AC-L10A/B/C Accessories Image device Recommended recording Used battery pack AC power adaptor A/V connecting cable (1) 8.93 mm (1/1.8 type) color distance (ISO is set to AUTO): NP-FM50 Power requir
Supplied accessories
DSC-S70 SERVICE MANUAL US Model Canadian Model Level 2 Ver. 1.3 2002.09 AEP Model UK Model E model Hong Kong Model Australian Model Chinese Model Korea Model Tourist Model Japanese Model This service manual contains information for Japanese model as well. On the SY-58 board SY-58 board This service
SPECIFICATIONS System Output connector General AC-L10A/B/C NP-FM50 battery pack
DSC-S85 SERVICE MANUAL US Model Canadian Model Level 2 AEP Model UK Model E Model Ver 1.1 2001. 08 Hong Kong Model Australian Model Chinese Model Korea Model Tourist Model Japanese Model Differences Manual This Service Manual covers only differences from DSC-S75 (Level 2). In performing repair, refe
SPECIFICATIONS System Output connector General AC-L10A/B/C NP-FM50 battery pack
DSC-S85 SERVICE MANUAL US Model Canadian Model Level 2 AEP Model UK Model E Model Ver 1.1 2001. 08 Hong Kong Model Australian Model Chinese Model Korea Model Tourist Model Japanese Model Differences Manual This Service Manual covers only differences from DSC-S75 (Level 2). In performing repair, refe
SAFETY-RELATED COMPONENT WARNING!! ATTENTION AU COMPOSANT AYANT RAPPORT
DSC-S75 SERVICE MANUAL US Model Canadian Model Level 2 AEP Model UK Model E Model Ver 1.2 2001. 08 Hong Kong Model Australian Model Chinese Model Korea Model Tourist Model Japanese Model This service manual contains information for Japanese model as well. On the SY-68 board SY-68 board This service
DSC-T1 SERVICE MANUAL LEVEL 2 US Model Canadian Model UK Model Hong Kong Model Australian Model Korea Model Chinese Model Tourist Model Japanese Model
DSC-T1 SERVICE MANUAL LEVEL 2 US Model Ver 1.0 2003. 10 Canadian Model Revision History AEP Model UK Model How to use E Model Acrobat Reader Hong Kong Model Australian Model Korea Model Chinese Model Tourist Model Japanese Model Link SPECIFICATIONS BLOCK DIAGRAMS PRINTED WIRING BOARDS SERVICE NOTE F
DSC-T1 SERVICE MANUAL LEVEL 2 US Model Canadian Model UK Model Hong Kong Model Australian Model Korea Model Chinese Model Tourist Model Japanese Model
DSC-T1 SERVICE MANUAL LEVEL 2 US Model Ver 1.1 2004. 03 Canadian Model Revision History AEP Model UK Model How to use E Model Acrobat Reader Hong Kong Model Australian Model Korea Model Chinese Model Tourist Model Japanese Model Link SPECIFICATIONS BLOCK DIAGRAMS PRINTED WIRING BOARDS SERVICE NOTE F
DSC-T1 SERVICE MANUAL LEVEL 1 US Model Ver 1.2 2004. 03 Canadian Model UK Model E Model Hong Kong Model Australian Model Korea Model Chinese Model Tourist Model
DSC-T1 SERVICE MANUAL LEVEL 1 US Model Ver 1.2 2004. 03 Canadian Model Revision History AEP Model UK Model E Model Hong Kong Model Australian Model Korea Model Chinese Model Tourist Model Japanese Model Link SPECIFICATIONS SELF DIAGNOSIS FUNCTION • INSTRUCTION MANUAL is shown at the end of this docu
• Change of Automatic Adjustment Program • Change of Message for Destination Data
DSC-T100 Auto-ADJ SERVICE MANUAL Ver. 1.1 2007.04 SUPPLEMENT-1 File this supplement with the service manual. (DI07-003) • Change of Automatic Adjustment Program • Change of Message for Destination Data Write • Addition of [Read], [Save], and [Load] buttons to Angular Velocity Sensitivity Adjustment
CAUTION Danger of explosion if battery is incorrectly replaced.
DSC-T10 SERVICE MANUAL LEVEL 3 US Model Ver 1.1 2006.09 Canadian Model Revision History AEP Model UK Model How to use E Model Acrobat Reader Australian Model Hong Kong Model Chinese Model Internal memory Korea Model ON BOARD Argentine Model Brazilian Model Japanese Model Photo: Silver Tourist Model
SPECIFICATIONS Camera [Input and Output connectors] BC-CS3 battery charger
DSC-T10 SERVICE MANUAL LEVEL 2 US Model Ver 1.0 2006.07 Canadian Model Revision History AEP Model UK Model How to use E Model Acrobat Reader Australian Model Hong Kong Model Chinese Model Internal memory ON BOARD Korea Model Argentine Model Japanese Model Tourist Model Photo: Silver Link SPECIFICATI
SPECIFICATIONS Camera [Input and Output connectors] BC-CSG/BC-CSGB/BC-CSGC
DSC-T100 SERVICE MANUAL LEVEL 2 US Model Ver. 1.0 2007.02 Canadian Model Revision History AEP Model UK Model How to use E Model Acrobat Reader Australian Model Hong Kong Model Chinese Model Internal memory Korea Model ON BOARD Brazilian Model Japanese Model Tourist Model Photo: Silver Link SPECIFICA
WARNING To prevent fire or shock hazard, do
DSC-T11 SERVICE MANUAL LEVEL 1 Differences Manual DSC-T11 AEP Model UK Model E Model Ver 1.1 2004. 09 Hong Kong Model Australian Model Revision History Korea Model Chinese Model Tourist Model Japanese Model • This Service Manual shows only the difference from DSC-T1. Refer to the Service Manual Leve
WARNING To prevent fire or shock hazard, do
DSC-T11 SERVICE MANUAL LEVEL 1 Differences Manual DSC-T11 AEP Model UK Model E Model Ver 1.0 2004. 04 Hong Kong Model Australian Model Revision History Korea Model Chinese Model Tourist Model Japanese Model • This Service Manual shows only the difference from DSC-T1. Refer to the Service Manual Leve
SPECIFICATIONS Camera [Input and Output connectors] BC-CSG/BC-CSGB/BC-CSGC
DSC-T20/T25 SERVICE MANUAL LEVEL 2 US Model Ver 1.0 2007.03 Canadian Model Revision History AEP Model UK Model How to use E Model Acrobat Reader Australian Model Hong Kong Model Chinese Model Internal memory Korea Model ON BOARD Argentine Model Brazillian Model Japanese Model Photo: Silver Tourist M
Model information table
DSC-T20/T25 SERVICE MANUAL LEVEL 3 US Model Ver 1.0 2007.03 Canadian Model Revision History AEP Model UK Model How to use E Model Acrobat Reader Australian Model Hong Kong Model Chinese Model Internal memory Korea Model ON BOARD Argentine Model Brazillian Model Japanese Model Photo: Silver Tourist M
DSC-T3 SERVICE MANUAL LEVEL 2 DSC-T3
DSC-T3 SERVICE MANUAL LEVEL 2 DSC-T3 Ver 1.0 2004. 09 US Model AEP Model Revision History UK Model E Model Hong Kong Model Australian Model How to use Chinese Model Acrobat Reader Japanese Model Korea Model Tourist Model Link SPECIFICATIONS BLOCK DIAGRAMS PRINTED WIRING BOARDS SERVICE NOTE FRAME SCH
DSC-T3 SERVICE MANUAL LEVEL 1 DSC-T3 Ver 1.0 2004. 09 US Model Revision History UK Model Link SPECIFICATIONS ACCESSORIES SELF DIAGNOSIS FUNCTION
DSC-T3 SERVICE MANUAL LEVEL 1 DSC-T3 Ver 1.0 2004. 09 US Model AEP Model Revision History UK Model E Model Hong Kong Model Australian Model Chinese Model Japanese Model Korea Model Tourist Model Link SPECIFICATIONS ACCESSORIES SELF DIAGNOSIS FUNCTION • INSTRUCTION MANUAL is shown at the end of this
DSC-T3 SERVICE MANUAL LEVEL 2 DSC-T3
DSC-T3 SERVICE MANUAL LEVEL 2 DSC-T3 Ver 1.2 2005. 09 US Model AEP Model Revision History UK Model E Model Hong Kong Model Australian Model How to use Chinese Model Acrobat Reader Japanese Model Korea Model Tourist Model Link SPECIFICATIONS BLOCK DIAGRAMS PRINTED WIRING BOARDS SERVICE NOTE FRAME SCH
DSC-T3 SERVICE MANUAL LEVEL 2 DSC-T3
DSC-T3 SERVICE MANUAL LEVEL 2 DSC-T3 Ver 1.1 2005. 04 US Model AEP Model Revision History UK Model E Model Hong Kong Model Australian Model How to use Chinese Model Acrobat Reader Japanese Model Korea Model Tourist Model Link SPECIFICATIONS BLOCK DIAGRAMS PRINTED WIRING BOARDS SERVICE NOTE FRAME SCH
DSC-T3 SERVICE MANUAL LEVEL 1 DSC-T3 Ver 1.2 2005. 09 US Model Revision History AEP Model Link
DSC-T3 SERVICE MANUAL LEVEL 1 DSC-T3 Ver 1.2 2005. 09 US Model Canadian Model Revision History AEP Model UK Model E Model Hong Kong Model Australian Model Chinese Model Japanese Model Korea Model Tourist Model Link SPECIFICATIONS ACCESSORIES SELF DIAGNOSIS FUNCTION • INSTRUCTION MANUAL is shown at t
DSC-T3 SERVICE MANUAL LEVEL 1 DSC-T3 Ver 1.1 2005. 04 US Model Revision History UK Model Link SPECIFICATIONS ACCESSORIES SELF DIAGNOSIS FUNCTION
DSC-T3 SERVICE MANUAL LEVEL 1 DSC-T3 Ver 1.1 2005. 04 US Model AEP Model Revision History UK Model E Model Hong Kong Model Australian Model Chinese Model Japanese Model Korea Model Tourist Model Link SPECIFICATIONS ACCESSORIES SELF DIAGNOSIS FUNCTION • INSTRUCTION MANUAL is shown at the end of this
SPECIFICATIONS Camera [LCD screen] BC-CS3 battery charger
DSC-T30 SERVICE MANUAL LEVEL 2 US Model Ver 1.0 2006.03 Canadian Model Revision History AEP Model UK Model How to use E Model Acrobat Reader Australian Model Hong Kong Model Chinese Model Internal memory ON BOARD Korea Model Brazilian Model Japanese Model Tourist Model Photo: Silver Link SPECIFICATI
DSC-T5 SERVICE MANUAL LEVEL 1 US Model UK Model E Model Australian Model Hong Kong Model Chinese Model Korea Model Brazilian Model Japanese Model Tourist Model
DSC-T5 SERVICE MANUAL LEVEL 1 US Model Ver 1.2 2005.10 Canadian Model Revision History AEP Model UK Model E Model Australian Model Hong Kong Model Chinese Model Korea Model Brazilian Model Japanese Model Photo: Silver Tourist Model Link SPECIFICATIONS ACCESSORIES INSTRUCTION MANUAL SERVICE NOTE The
DSC-T5 SERVICE MANUAL LEVEL 2
DSC-T5 SERVICE MANUAL LEVEL 2 US Model Ver 1.2 2005.10 Canadian Model Revision History AEP Model UK Model How to use E Model Acrobat Reader Australian Model Hong Kong Model Internal memory Chinese Model ON BOARD Korea Model Brazilian Model Photo: Silver Japanese Model Tourist Model Link SPECIFICATIO
SPECIFICATIONS Camera [Input and Output connectors] BC-CS3 battery charger
DSC-T50 SERVICE MANUAL LEVEL 2 US Model Ver 1.0 2006.09 Canadian Model Revision History AEP Model UK Model E Model How to use Australian Model Acrobat Reader Hong Kong Model Chinese Model Korea Model Internal memory Argentine Model ON BOARD Brazilian Model Japanese Model Tourist Model Photo: Silver