Download: SPECIFICATIONS Camera [Power, general] Cyber-shot Station CSS-SA

DSC-S60/S80/S90/ST80 SERVICE MANUAL LEVEL 1 DSC-S60/S90 Ver 1.1 2005.07 US Model Canadian Model Revision History Chinese Model Tourist Model DSC-S60/S80/S90/ ST80 AEP Model UK Model E Model Hong Kong Model DSC-S60/S80/S90 Australian Model Korea Model DSC-S90 Photo: DSC-S90/Silver Argentine Model Link SPECIFICATIONS SELF DIAGNOSIS FUNCTION ORNAMENTAL PARTS • INSTRUCTION MANUAL is shown at the end of this document. Method for Copying the Data in Internal Memory The data can be copied by the operations on the Setup screen. Copy Copies all images in the internal memory to a “Memory Stick”. OK See ...
Author: 阿由葉 Shared: 8/19/19
Downloads: 1800 Views: 4305

Content

DSC-S60/S80/S90/ST80 SERVICE MANUAL LEVEL 1 DSC-S60/S90 Ver 1.1 2005.07 US Model

Canadian Model

Revision History Chinese Model

Tourist Model

DSC-S60/S80/S90/ ST80

AEP Model UK Model E Model Hong Kong Model

DSC-S60/S80/S90

Australian Model Korea Model

DSC-S90

Photo: DSC-S90/Silver Argentine Model

Link SPECIFICATIONS SELF DIAGNOSIS FUNCTION ORNAMENTAL PARTS

• INSTRUCTION MANUAL is shown at the end of this document.

Method for Copying the Data in Internal Memory

The data can be copied by the operations on the Setup screen. Copy Copies all images in the internal memory to a “Memory Stick”. OK See the following procedure. Cancel Cancels the copying. 1 Insert a “Memory Stick” having 32 MB or larger capacity. 2 Select [OK] with v on the control button, then press z. The message “All data in internal memory will be copied Ready?” appears. 3 Select [OK] with v, then press z. Copying starts. Copying 102_COPY • Use batteries with enough capacity or the AC Adaptor (not supplied). If you attempt to copy image files DIGITAL STILL CAMERA using batteries with little remaining charge, the batteries may run out, causing copying to fail or possibly corrupting the data. • You cannot copy individual images. • The original images in the internal memory are retained even after copying. To delete the contents of the internal memory, remove the “Memory Stick” after copying, then execute the [Format] command in Internal Memory Tool. • You cannot select a folder copied on a “Memory Stick”. • The setting of (Print order) marks is not copied even when you copy data.

DSC-S60/S80/S90/ST80 2005G0500-1 © 2005.7

9-876-869-41 Sony EMCS Co. Published by DI Technical Support Department,

SPECIFICATIONS Camera [Power, general] Cyber-shot Station CSS-SA

[System] Power HR15/51:HR6 (Size AA) (supplied with DSC-ST80) Nickel-Metal Hydride batteries [Input/Output connectors] Image device 6.85 mm (1/2.7 type) color (2) (supplied with DSC-S90/ A/V OUT (MONO) jack (Monaural) CCD, Primary color filter S80), 2.4 V Minijack Total pixel number of camera R6 (size AA) Alkaline batteries Video*: 1 Vp-p, 75 Ω, unbalanced, Approx. 4 231 000 pixels (2) (supplied with DSC-S60), sync negative3VAudio*: 327 mV (47 kΩ loaded) Effective pixel number of camera Battery pack NP-NH25 (1) Approx. 4 065 000 pixels Output impedance: 2.2 kΩ(supplied with DSC-ST80) * When the DSC-S90/S80/ST80/S60 is Lens Carl Zeiss Vario-Tessar ZR6 (size AA) Oxy Nickel connected. 3× zoom lens Primary Battery (2) (not USB jack: B f = 6.0 - 18.0 mm (39 - 117 mm supplied), 3 V when converted to a 35 mm still AC-LS5K AC Adaptor (not DC IN jack camera) supplied), 4.2 V Multi connector F2.8 - 5.2 [General]Power consumption Dimensions (Approx.): Exposure control Automatic exposure, Manual (during shooting with the LCD screen on) DSC-S90: 1.1 W 120 × 36 × 89 mmexposure, Scene Selection (7 (4 3/4 × 1 7/16 × 3 5/8 inches) modes) DSC-S80/ST80/S60: 1.0 W (w/h/d) White balance Automatic, Daylight, Cloudy, Operating temperature Mass (Approx.): 120 g (4.3 oz) Fluorescent, Incandescent 0°C to +40°C (+32°F to Operating temperature: +104°F) File format (DCF compliant) 0 °C to +40 °C (32 °F to +104 °F) Still images: Exif Ver. 2.2 Storage temperature Storage temperature: JPEG compliant, DPOF –20°C to +60°C (–4°F to –20 °C to +60 °C (–4 °F to +140 °F) compatible +140°F) Movies: MPEG1 compliant AC Adaptor AC-LS5Dimensions 96.6×64.4×40.1 mm (Monaural) (supplied with DSC-ST80)(3 7/8×2 5/8×1 5/8 inches) (W/H/D, excluding maximum Input rating:Recording media Internal memory 32 MB protrusions) 100 V to 240 V AC 50/60 Hz“Memory Stick” Output rating: Flash Recommended distance (ISO Mass DSC-S90: 4.2 V DC set to Auto): 0.2 m to 4.5 m Approx. 253 g (8 oz) (including See the label on the AC Adaptor for (7 7/8 inches to 178 1/2 inches) two batterries and wrist strap) (W)/0.5 m to 2.5 m DSC-S80/ST80/S60: other specifications. Dimensions (Approx.): (19 3/4 inches to 98 1/2 inches) Approx. 249 g (8 oz) (including (T) two batterries and wrist strap) 48 × 29 × 81 mm (1 15/16 × 1 3/16 × 3 1/4 inches) [Input and Output connectors] Microphone Electret condenser microphone (w/h/d, excluding projecting parts) Speaker Dynamic speaker Mass (Approx.): Multi connector Exif Print Compatible 130 g (5 oz) excluding AC Power cord USB communication Operating temperature: PRINT Image Matching III Hi-Speed USB (USB 2.0 0 °C to +40 °C (32 °F to +104 °F)Compatible compliant) Storage temperature: PictBridge Compatible –20 °C to +60 °C (–4 °F to +140 °F) [LCD screen] BC-CS2A/CS2B Ni-MH battery charger Rechargeable battery pack NP-NH25 LCD panel DSC-S90: (supplied with DSC-ST80) 6.2 cm (2.5 type) TFT drive (supplied with DSC-S90/S80) DSC-S80/ST80/S60: Normal voltage:Power requirements 5.1 cm (2.0 type) TFT drive 1.2 V × 2AC 100 to 240 V, 50/60 Hz, Capacity: Total number of dots3Wtyp. 2,500 mAh 115 200 (480×240) dots Output voltage AA: DC 1.4V 400 mA × 2 Operating temperature: AAA: DC 1.4 V 160 mA × 2 0 °C to +40 °C (32 °F to +104 °F) Operating temperature 0°C to +40°C (+32°F to Design and specifications are subject to change +104°F) without notice. Storage temperature –20°C to +60°C (–4°F to +140°F) Dimensions Approx. 71×30×91 mm (2 7/8×1 3/16×3 5/8 inches) (W/H/D) Mass Approx. 90 g (3 oz)

DSC-S60/S80/S90/ST80

— 2 —,

Table for differences of function

Model DSC-S60 DSC-S80 DSC-S90 DSC-ST80 US, CND, AEP, UK, US, CND, AEP, UK, AEP, UK, E, Destination E, AUS, HK, E, AUS, HK, AEP, UK, E, HK AUS, HK, KR CH, KR, JE CH, KR, AR, JE LCD panel size 2.0 type 2.0 type 2.5 type 2.0 type • Abbreviation AR : Argentine model AUS : Australian model CH : Chinese model CND : Canadian model HK : Hong Kong model JE : Tourist model KR : Korea model SAFETY-RELATED COMPONENT WARNING!! ATTENTION AU COMPOSANT AYANT RAPPORT À LA SÉCURITÉ! COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE WITH LES COMPOSANTS IDENTIFÉS PAR UNE MARQUE 0 SUR LES MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU PUBLISHED BY SONY. DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.

SAFETY CHECK-OUT

After correcting the original service problem, perform the following safety checks before releasing the set to the customer. 1. Check the area of your repair for unsoldered or poorly-soldered 5. Check the B+ voltage to see it is at the values specified. connections. Check the entire board surface for solder splashes 6. Flexible Circuit Board Repairing and bridges. • Keep the temperature of the soldering iron around 270°C 2. Check the interboard wiring to ensure that no wires are during repairing. "pinched" or contact high-wattage resistors. • Do not touch the soldering iron on the same conductor of the 3. Look for unauthorized replacement parts, particularly circuit board (within 3 times). transistors, that were installed during a previous repair. Point • Be careful not to apply force on the conductor when soldering them out to the customer and recommend their replacement. or unsoldering. 4. Look for parts which, through functioning, show obvious signs of deterioration. Point them out to the customer and recommend their replacement.

DSC-S60/S80/S90/ST80

— 3 —,

SELF-DIAGNOSIS FUNCTION

[Description on Self-diagnosis Display] Self-diagnosis display • C: ss: ss You can reverse the camera malfunction yourself. (However, contact your Sony dealer or local authorized Sony service facility when you cannot recover from the camera malfunction.) • E: ss: ss Contact your Sony dealer or local authorized Sony service facility. Display Code Countermeasure Cause Caution Display During Error C:32:ss Turn the power off and on again. Trouble with hardware. SYSTEM ERROR Format the “Memory Stick” or internal “Memory Stick” or internal memory is FORMAT ERROR memory. unformatted. C:13:ss Insert a new “Memory Stick”. “Memory Stick” is broken. MEMORY STICK ERROR Turn the power off and on again. Trouble with internal memory. INTERNAL MEMORY ERROR E:61: When failed in the focus and zoomss Checking of lens drive circuit. initialization. Checking of flash unit or replacement Abnormality when flash is being — E:91:ss of flash unit. charged. E:92:ss Insert batteries correctly. Batteries are not inserted correctly. DSC-S60/S80/S90/ST80 — 4 —, 1. MAIN PARTS Note: The components identified by • Items marked “*” are not stocked since they are seldom required for routine service. mark 0 or dotted line with mark Some delay should be anticipated when ordering these items. 0 are critical for safety. • The parts numbers of such as a cabinet are also appeared in this section. Replace only with part numberspecified. Refer to the parts number mentioned below the name of parts to order. • Abbreviation Les composants identifiés par unemarque 0 sont critiquens pour la AR : Argentine model CND: Canadian model KR : Korean model sécurité. AUS: Australian model HK : Hong Kong model Ne les remplacer que par une pièce JE : Tourist model portant le numéro spécifié.CH : Chinese model 1. ORNAMENTAL PARTS Lens ring (620) 2-595-847-01 (S60/S80/ST80) Lens ring (630) 2-591-956-01 (S90)

DSC-S60/S80/S90/ST80

— 5 —,

Ver 1.1 2005.07 Checking supplied accessories. DSC-S60 only DSC-S80/S90 only

R6 (size AA) alkaline USB, AV cable for Power cord (1) HR6 (size AA) Nickel-Metal batteries (2) multi-use terminal (1) 0 1-776-985-11 (KR) Hydride batteries (2) (not supplied) 1-830-345-11 0 1-782-476-13 (CH) (not supplied) 0 1-783-374-11 (UK, HK) 0 1-783-952-11 (AR) 0 1-790-107-42 (US, CND) 0 1-790-732-71 (JE)

DSC-ST80 only 0 1-823-946-12 (AEP, E)

0 1-827-945-11 (AUS) Power cord (1) AC Adaptor 0 1-783-374-11 (UK, HK) AC-LS5 (1) 0 1-823-946-12 (AEP, E) 0 1-479-284-12 Battery charger (BC-CS2A/CS2B) (1) 0 1-479-378-21 (AEP, UK, E, AR, HK, AUS) 0 1-479-378-31 (KR, CH) 0 1-479-378-11 (US, CND, JE) Conversion 2P adaptor (1) A/V connecting cable (1) 0 1-569-008-21 (E) 0 1-824-519-11 Conversion 2P adaptor (1) Conversion 2P adaptor (1) 0 1-569-008-21 (E) 0 1-573-856-12 (JE) USB cable (1) Multiple (cradle) 1-827-754-11 connector (1) 1-819-202-11 USB, AV cable for Battery case (1) multi-use terminal (1) 3-074-757-01 Rechargeable battery pack 1-830-345-11 (NP-NH25) (1) (not supplied)

Other accessories

2-590-046-11 MANUAL, INSTRUCTION (CSS-SA) (ENGLISH, FRENCH) (AEP, UK, E, HK) 2-590-046-21 MANUAL, INSTRUCTION (CSS-SA) (GERMAN, ITALIAN, DUTCH, SPANISH, PORTUGUESE, SWEDISH, DANISH, FINNISH, RUSSIAN) (AEP, E) 2-590-046-31 MANUAL, INSTRUCTION (CSS-SA) (TRADITIONAL CHINESE, SIMPLIFIED CHINESE, KOREAN, ARABIC) (E, HK) The components identified by Les composants identifiés par une mark 0 or dotted line with marque 0 sont critiques pour la mark 0 are critical for safety. sécurité. Replace only with part num- Ne les remplacer que par une pièce ber specified. portant le numéro spécifié.

DSC-S60/S80/S90/ST80

— 6 —, Wrist strap (1) CD-ROM 2-050-981-01 (Cyber-shot application software) (1) 2-583-852-11 (US) 2-583-853-01 (EXCEPT US)

Other accessories

2-590-636-11 INSTRUCTION (READ THIS FIRST) (ENGLISH) (US, CND, AEP, UK, E, HK, AUS, JE) 2-590-636-21 INSTRUCTION (READ THIS FIRST) (FRENCH, ITALIAN) (CND, AEP) 2-590-636-31 INSTRUCTION (READ THIS FIRST) (SPANISH, PORTUGUESE) (AEP, E, AR, JE) 2-590-636-41 INSTRUCTION (READ THIS FIRST) (GERMAN, DUTCH) (AEP) 2-590-636-51 INSTRUCTION (READ THIS FIRST) (TRADITIONAL CHINESE, SIMPLIFIED CHINESE) (E, HK, CH, JE) 2-590-636-61 INSTRUCTION (READ THIS FIRST) (RUSSIAN, SWEDISH) (AEP) 2-590-636-71 INSTRUCTION (READ THIS FIRST) (ARABIC, PERSIAN) (E) 2-590-636-81 INSTRUCTION (READ THIS FIRST) (KOREAN) (KR, JE) 2-590-636-91 INSTRUCTION (READ THIS FIRST) (POLISH, CZECH) (AEP) 2-590-637-11 INSTRUCTION (READ THIS FIRST) (HUNGARIAN, SLOVAK) (AEP) 2-590-639-11 INSTRUCTION (USER’S GUIDE) (ENGLISH) (US, CND, AEP, UK, E, HK, AUS, JE) 2-590-639-21 INSTRUCTION (USER’S GUIDE) (FRENCH, ITALIAN) (CND, AEP) 2-590-639-31 INSTRUCTION (USER’S GUIDE) (SPANISH, PORTUGUESE) (AEP, E, AR, JE) 2-590-639-41 INSTRUCTION (USER’S GUIDE) (GERMAN, DUTCH) (AEP) 2-590-639-51 INSTRUCTION (USER’S GUIDE) (TRADITIONAL CHINESE, SIMPLIFIED CHINESE) (E, HK, CH, JE) 2-590-639-61 INSTRUCTION (USER’S GUIDE) (RUSSIAN, SWEDISH) (AEP) 2-590-639-71 INSTRUCTION (USER’S GUIDE) (ARABIC, PERSIAN) (E) 2-590-639-81 INSTRUCTION (USER’S GUIDE) (KOREAN) (KR, JE) 2-590-639-91 INSTRUCTION (USER’S GUIDE) (POLISH, CZECH) (AEP) 2-590-640-11 INSTRUCTION (USER’S GUIDE) (HUNGARIAN, SLOVAK) (AEP)

DSC-S60/S80/S90/ST80

— 7 —, 2-590-639-11(1)

Digital Still Camera Enjoying the

camera

User’s Guide/ Troubleshooting Using the menu

Operating Instructions Before operating the unit, please read this manual and “Read This First” (separate volume) thoroughly, and retain Using the Setup screen it for future reference.

Owner’s Record

The model and serial numbers are located on the bottom. Using your computer Record the serial number in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. Model No. DSC-S60/S80/ST80/S90 Serial No. _ Printing still images

DSC-S60/ Connecting your S80/ST80/ camera to your TV S90

Troubleshooting Others “Read This First” (separate volume) Additional information on this product and answers Explains the set-up and basic operations to frequently asked questions can be found at our for shooting/playback with your camera. Index Customer Support Website. Printed on 100% recycled paper using VOC (Volatile Organic Compound)-free vegetable oil based ink. Printed in Japan © 2005 Sony Corporation, If you have any questions about this product, you

WARNING may call:

To prevent fire or shock hazard, do Sony Customer Information Services Center not expose the unit to rain or 1-800-222-SONY (7669) moisture. The number below is for the FCC related matters only.

For Customers in the U.S.A. Regulatory Information

Declaration of Conformity Trade Name: SONY Model No.: DSC-S60 Responsible Party: Sony Electronics Inc. Address: 16450 W. Bernardo Dr, San Diego, CA 92127U.S.A. Telephone No.: 858-942-2230 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause This symbol is intended to harmful interference, and (2) this device must alert the user to the presence accept any interference received, including of uninsulated “dangerous interference that may cause undesired voltage” within the product's operation. enclosure that may be of sufficient magnitude to constitute a risk of electric Declaration of Conformity shock to persons. Trade Name: SONY Model No.: DSC-S90 This symbol is intended to alert the user to the presence Responsible Party: Sony Electronics Inc. of important operating and Address: 16450 W. Bernardo Dr, maintenance (servicing) San Diego, CA 92127U.S.A. instructions in the literature Telephone No.: 858-942-2230 accompanying the appliance. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

CAUTION

You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.,

Note: Notice for customers in the

This equipment has been tested and found to comply with the limits for a Class B digital United Kingdom (DSC-S90/S80/ device, pursuant to Part 15 of the FCC Rules. ST80 only) These limits are designed to provide reasonable A moulded plug complying with BS 1363 is fitted protection against harmful interference in a to this equipment for your safety and convenience. residential installation. This equipment generates, Should the fuse in the plug supplied need to be uses, and can radiate radio frequency energy and, replaced, a fuse of the same rating as the supplied if not installed and used in accordance with the one and approved by ASTA or BSI to BS 1362, instructions, may cause harmful interference to (i.e., marked with an or mark) must be radio communications. However, there is no used. guarantee that interference will not occur in a particular installation. If this equipment does If the plug supplied with this equipment has a cause harmful interference to radio or television detachable fuse cover, be sure to attach the fuse reception, which can be determined by turning the cover after you change the fuse. Never use the equipment off and on, the user is encouraged to plug without the fuse cover. If you should lose the try to correct the interference by one or more of fuse cover, please contact your nearest Sony the following measures: service station. – Reorient or relocate the receiving antenna. – Increase the separation between the For Customers in Europe equipment and receiver. – Connect the equipment into an outlet on a This product has been tested and found compliant circuit different from that to which the with the limits set out in the EMC Directive for receiver is connected. using connection cables shorter than 3 meters (9.8 feet). – Consult the dealer or an experienced radio/TV technician for help. Attention The supplied interface cable must be used with the The electromagnetic fields at the specific equipment in order to comply with the limits for a frequencies may influence the picture and sound digital device pursuant to Subpart B of Part 15 of of this camera. FCC Rules.

Notice

If static electricity or electromagnetism causes

For Customers in the U.S.A. and data transfer to discontinue midway (fail), restart Canada (DSC-S90 only) the application or disconnect and connect the

communication cable (USB, etc.) again.

RECYCLING NICKEL METAL HYDRIDE BATTERIES

Nickel Metal Hydride batteries are recyclable. You can help preserve our environment by returning your used rechargeable batteries to the collection and recycling location nearest you. For more information regarding recycling of rechargeable batteries, call toll free 1-800-822-8837, or visit http://www.rbrc.org/ Caution: Do not handle damaged or leaking Nickel Metal Hydride batteries.,

Notes on using your camera Types of “Memory Stick” that can be Carl Zeiss lens

used (not supplied) This camera is equipped with a Carl Zeiss lens The IC recording medium used by this which is capable of reproducing sharp images camera is a “Memory Stick”. There are two with excellent contrast. types of “Memory Stick”. The lens for this camera has been produced under a quality assurance system certified by Carl Zeiss • “Memory Stick”: you can use a “Memory Stick” in accordance with the quality standards of Carl with your camera. Zeiss in Germany.

No compensation for contents of the

recording • The contents of the recording cannot be • “Memory Stick Duo”: you can use a “Memory compensated for if recording or playback is not Stick Duo” by inserting it into a Memory Stick possible due to a malfunction of your camera or Duo Adaptor. recording media, etc.

Back up recommendation

• To avoid the potential risk of data loss, always Memory Stick Duo Adaptor copy (back up) data to other medium. • For details on “Memory Stick”, see page 91. Back up of the internal memory • If you turn off the power by opening the battery/

Notes on the Nickel-Metal Hydride “Memory Stick” cover, etc. during the access

battery (supplied with DSC-S80/S90 lamp is lit, the data in the internal memory may only) be corrupted. Be sure to back up the data to avoid the potential risk of data loss. See pages • Charge both of the supplied Ni-MH batteries 23, 58 on how to back up the data. before using the camera for the first time. (t step 1 in“Read This First”) Notes on recording/playback • The batteries can be charged even if they are not • This camera is neither dust-proof, nor splash- completely discharged. Also, even if batteries proof, nor water-proof. Read “Precautions” are not fully charged, you can use the partially (page 95) before operating the camera. charged capacity of the batteries as is. • Before you record one-time events, make a trial • If you do not intend to use the batteries for a recording to make sure that the camera is long time, use up the existing charge and working correctly. remove them from your camera, then store them in a cool, dry place. This is to maintain the • Be careful not to get the camera wet. Water batteries’ functions (page 93). entering the inside of the camera may cause malfunctions which in some cases may not be • For details on the usable batteries, see page 93. repairable.

Note on the battery pack NP-NH25 • Do not aim the camera at the sun or other bright light. This may cause irrecoverable damage to

(supplied with DSC-ST80 only) your eyes. Or it may cause the malfunction of Refer to the operating instructions “Cyber-shot your camera. Station”. • Do not use the camera near a location that generates strong radio waves or emits radiation. The camera may not be able to record or play back properly. • Using the camera in sandy or dusty locations may cause malfunctions. • If moisture condensation occurs, remove it before using the camera (page 95)., • Do not shake or strike the camera. In addition to The pictures used in this manual malfunctions and an inability to record images, this may render the recording medium unusable, The photographs used as examples of pictures in this manual are reproduced images, and are not or cause image data breakdown, damage or loss. actual images shot using this camera. • Clean the flash surface before use. The heat of flash emission may cause dirt on the flash On illustrations surface to become discolored or to stick to the flash surface, resulting in insufficient light Illustrations used in this manual are of the DSC- emission. S60 unless noted otherwise.

Notes on the LCD screen, LCD finder

(for models with an LCD finder) and lens • The LCD screen and the LCD finder are manufactured using extremely high-precision technology so over 99.99% of the pixels are operational for effective use. However, there may be some tiny black points and/or bright points (white, red, blue, or green in color) that constantly appear on the LCD screen and the LCD finder. These points are normal in the manufacturing process and do not affect the recording in any way. • Exposing the LCD screen, the finder, or the lens to direct sunlight for long periods may cause malfunctions. Be careful when placing the camera near a window or outdoors. • Do not press against the LCD screen. The screen may be discolored and that may cause a malfunction. • Images may trail across on the LCD screen in a cold location. This is not a malfunction. • This camera is equipped with a power zoom lens. Be careful not to bump the lens, and be careful not to apply force to it.

On image data compatibility

• This camera conforms with DCF (Design rule for Camera File system universal standard) established by JEITA (Japan Electronics and Information Technology Industries Association). • Playback of images recorded with your camera on other equipment and playback of images recorded or edited with other equipment on your camera are not guaranteed.

Warning on copyright

Television programs, films, videotapes, and other materials may be copyrighted. Unauthorized recording of such materials may be contrary to the provisions of the copyright laws.,

For full use of the digital still camera

Prepare the camera and shoot in auto adjustment mode “Read This First” (separate volume) 1 Prepare the battery 2 Turn the camera on/set the clock 3 Insert a “Memory Stick” (not supplied) 4 Select the image size for use 5 Shoot images easily (Auto adjustment mode) Shoot still images (Scene Selection) 6 View/Delete images Get more friendly with your camera This manual • Shoot with your favorite settings (Program auto shooting/ Manual shooting) t page 26 • Enjoy various shooting/playback using the menu t page 29 • Change the default settings t page 45 Connect your camera to a PC or a printer This manual • Copy your images to a computer and enjoy editing them in various ways t page 56 • Print images by connecting your camera directly to a printer (PictBridge compliant printers only) t page 69,

Table of contents

Notes on using your camera ...4

Enjoying the camera

Basic techniques for better images ...10 Focus – Focusing on a subject successfully... 10 Exposure – Adjusting the light intensity ... 11 Color – On the effects of lighting... 12 Quality – On “image quality” and “image size” ... 13 Identifying parts...15 Indicators on the screen ...17 Changing the screen display ...21 Number of still images and recording time of movies...22 When you do not have a “Memory Stick” (Recording with the internal memory) ...23 Battery life and number of images that can be recorded/viewed ...24 Using the mode dial...26

Using the menu Using menu items ...29 Menu items ...30

Shooting menu ...31 (EV) 9 (Focus) (Metering Mode) WB (White Bal)

ISO

(P.Quality) Mode (REC Mode) M (Interval) (Flash Level) PFX (P.Effect) (Saturation) (Contrast) (Sharpness) (Setup), Viewing menu ... 38 (Folder) - (Protect)

DPOF

(Print) (Slide) (Resize) (Rotate) (Divide) (Setup) Trimming

Using the Setup screen Using Setup items... 45

Camera 1... 46 AF Mode Digital Zoom Date/Time Red Eye Reduction AF Illuminator Auto Review Camera 2... 49 Enlarged Icon Internal Memory Tool ... 50 Format Memory Stick Tool... 51 Format Create REC. Folder Change REC. Folder Copy Setup 1... 53 LCD Backlight Beep Language Initialize Setup 2... 54 File Number USB Connect Video Out Clock Set,

Using your computer

Enjoying your Windows computer ...56 Copying images to your computer...58 Viewing image files stored on a computer with your camera (using a “Memory Stick”) ...64 Using the supplied software ...65 Using your Macintosh computer...67

Printing still images

How to print still images ...69 Printing images directly using a PictBridge compliant printer ...70 Printing at a shop ...73

Connecting your camera to your TV

Viewing images on a TV screen...75

Troubleshooting

Troubleshooting ...77 Warning indicators and messages ...88

Others

On the “Memory Stick” ...91 On the battery charger and the batteries ...93 Precautions ...95 Specifications ...96

Index ...98

, Enjoying the camera

Basic techniques for better images

Focus Exposure Color Quality This section describes the basics so you can enjoy your camera. It tells you how to use various camera functions such as the mode dial (page 26), the menus (page 29), and so on.

Focus Focusing on a subject successfully

When you press the shutter button halfway down, the camera adjusts the focus automatically (Auto Focus). Remember to press the shutter button only halfway down. Press fully down Press halfway straight away down, then Flashing,lit/beeps Press fully down VGA FINE S AF 30 F3.5 To shoot a still image difficult to focus on t [Focus] (page 32) If the image looks blurred even after focusing, it may be because of camera shake. t See “Hints for preventing blur” (below).

Hints for preventing blur

Hold the camera steadily, keeping your arms at your side. Also, you can stabilize the camera by leaning against a tree or a building beside you. Using a tripod, and using the flash in dark places are also recommended., Enjoying the camera

Exposure Adjusting the light intensity

You can create various images by adjusting the exposure and the ISO sensitivity. Exposure is the amount of light that the camera will receive when you release the shutter. Shutter speed = Length of time the camera receives

Exposure: light

Aperture = Size of the opening allowing light to pass through ISO = Recording sensitivity Overexposure The exposure is automatically set to the = too much light proper value in the auto adjustment mode. Whitish image However, you can adjust it manually using the functions below. Correct exposure [Manual exposure]: Allows you to adjust the shutter speed and aperture value manually. t page 27 [EV]: Allows you to adjust the exposure that has Underexposure been determined by the camera. t page 31 = too little light Darker image [Metering Mode]: Allows you to change the part of the subject to be measured to determine the exposure. t page 33

Characteristics of “shutter speed” Characteristics of “aperture”

(F value) Faster Slower Open Close Moving objects Moving objects In-focus range In-focus range appear stopped. appear to flow. narrows, both widens, both backward and backward and forward. forward.,

Adjusting the ISO sensitivity

ISO is unit of measurement (sensitivity), estimating how much light an image pickup device (equivalent to photo films) receives. Even when the exposure is the same, images differ depending on the ISO sensitivity. [ISO] adjusts the sensitivity t page 34 High ISO sensitivity Records a bright image even when shooting in a dark location. However, the image tends to become noisy. Low ISO sensitivity Records a smoother image. However, the image may become darker.

Color On the effects of lighting

The apparent color of the subject is affected by the lighting conditions.

Example: The color of an image affected by light sources

Weather/lighting Daylight Cloudy Fluorescent Incandescent Characteristics of White (standard) Bluish Blue-tinged Reddish light The color tones are adjusted automatically in the auto adjustment mode. However, you can adjust color tones manually with [White Bal] (page 34)., Enjoying the camera

Quality On “image quality” and “image size”

A digital image is made up of a collection of small dots called pixels. If it contains a large number of pixels, the picture becomes large, it takes up more memory, and the image is displayed in fine detail. “Image size” is shown by the number of pixels. Although you cannot see the differences on the screen of the camera, the fine detail and data processing time differ when the image is printed or displayed on a computer screen. Description of the pixels and the image size 1 Image size: 4M 2304 2,304 pixels×1,728 pixels = 3,981,312 pixels 2 Image size: VGA(E-Mail) 640 640 pixels×480 pixels = 307,200 pixels Pixels,

Selecting the image size for use (t step 4 in “Read This First”)

Pixel Many (Fine image quality and large file Example: Printing in up to A4 size) size Few (Rough image quality but small file Example: An attached image size) to be sent by e-mail The default settings are marked with . Image size Usage guidelines 4M (2304×1728) Larger For printing high density images in A4 or A5 size 3:2 (2304×1536)* 3M (2048×1536) 1M (1280×960) For printing in postcard size VGA(E-Mail) For recording a large number of images (640×480) Smaller For attaching images to e-mail or creating web pages * Images are recorded in the same 3:2 aspect ratio as photograph printing paper or postcards, etc.

Selecting the image quality (compression ratio) in combination (page 34)

You can select the compression ratio when digital images are saved. When you select a high compression ratio, the image lacks the fineness of detail, but has a smaller file size.,

Identifying parts

See the pages in parentheses for details of K Multi connector (59, 75) Enjoying the camera operation. L Tripod receptacle16• Use a tripod with a screw length of less than 5.5 mm (7/32 inch). You will be unable to27firmly secure the camera to tripods having longer screws, and may damage the camera. 38MBattery/“Memory Stick” cover (t step491and 3 in “Read This First”) N OPEN button (t step 1 and 3 in “Read This First”) 5 q; O AC Adaptor cord cover To use the AC-LS5K AC Adaptor (not supplied) qa qs 1 qd qf qg A Shutter button (t step 5 in “Read This 2 First”) 3 B Mode dial (26) C POWER lamp (t step 2 in “Read This First”) D POWER button (t step 2 in “Read This First”) 4 E Lens F Microphone5GFinder window H Flash (t step 5 in “Read This First”) I Self-timer lamp (t step 5 in “Read This First”)/AF illuminator (48) J Lens ring Do not pinch the cord when you close Removing Attaching the cover., G For shooting: Zoom (W/T) button DSC-S90 (t step 5 in “Read This First”) 1 For viewing: / (Playback zoom) 2 button/ (Index) button (t step 6 in “Read This First”) 3 H (Display/LCD on/off) button (21) 4 I MENU button (29) J Control button 5 Menu on: v/V/b/B/z (t step 2 in 9 “Read This First”) q; Menu off: / / / (t step 5 in qa “Read This First”) qs Mode dial “M”: Shutter speed/aperture DSC-S80/ST80/S60 value (27) K Access lamp (t step 4 in “Read This 1 First” 2 L (Image Size/Delete) button (t step 4 and 6 in “Read This First”) 5 9 q; qa qs A AE/AF lock lamp/self-timer lamp (green) (t step 5 in “Read This First”) B Flash charge lamp/Record lamp (orange) (t step 5 in “Read This First”) C Speaker D Finder (t step 5 in “Read This First”) E LCD screen (17) F Hook for wrist strap (t “Read This First”),

Indicators on the screen

See the pages in parentheses for details of A Enjoying the camera operation. Display Indication

When shooting still images Battery remaining (t step

1 in “Read This First”) VGA 101 z AE/AF lock (t step 5 in 1/30” C:32:00 “Read This First”) M Recording mode (26, 35) White balance (34) STBY Standby/Recording a movie Return REC (t step 5 in “Read This S AF 125 F3.5 +2.0EV First”) Mode dial (Scene Selection) (t step 5 in

When shooting movies “Read This First”)

Mode dial (26)

STD

640101 STBY 00:00:00 [00:28:25] SL Flash mode (t step 5 in C:32:00 “Read This First”) Red-eye reduction (47) + Sharpness (37) 5 Saturation (37) 6 Contrast (37) +2.0EV ON AF illuminator (48) Metering mode (33) Picture effect (36)

B

Display Indication Manual exposure setup mode (27) Macro (t step 5 in “Read This First”) S AF M AF AF mode (46) AF range finder frame indicator (32) 1.0m Focus preset distance (32) z Return Manual exposure (27) z Set, C D Display Indication Display Indication 4M 3:2 3M Image size (t step 4 in Vibration warning (10) 1M VGA “Read This First”) • Indicates vibration will FINE STD prevent you from shooting640640160clear images. Even if the FINE STD Image quality (34) vibration warning appears, 101 Recording folder (51) you can still shoot images. • This does not appear when However, we recommend using the internal memory. using the flash or a tripod to increase the amount of Remaining internal light. memory capacity (22) E Low battery warning (24, Remaining “Memory 88) Stick” capacity (22) + Spot metering cross hair 00:00:00 Recording time [maximum (33) [00:28:05] recordable time] (22) AF range finder frame (32) 1/30" Multi Burst interval (36) 400 Remaining number of recordable images (22) Self-timer (t step 5 in “Read This First”) E C:32:00 Self-diagnosis display (88) Display Indication Date/Time (47) Histogram (21, 31) ISO number (34) NR slow shutter (27) 125 Shutter speed (27) F3.5 Aperture value (27) +2.0EV EV level value (31) DPOF Menu/Guide menu (29) (not displayed on the screen on the previous page), Enjoying the camera

When playing back still images A

Display Indication M VGA 101 101 12/12 Battery remaining (t step C:32:00 1 in “Read This First”) 1.3 +2.0EV 4M 3:2 3M Image size (t step 4 in 500 F3.5 1M VGA “Read This First”) FINE STD640640160MRecording mode (26, 35) N Playback (t step 6 in BACK/NEXT VOLUME “Read This First”) Volume (t step 6 in

When playing back movies “Read This First”)

- Protect (39) Print order (DPOF) mark (73) Change folder (38) • This does not appear when using the internal memory. 1.3 Zoom scaling (t step 6 in “Read This First”) Step Frame by frame playback 12/16 (35)

B

Display Indication 101-0012 Folder-file number (38) Playback bar (t step 6 in “Read This First”)

C

Display Indication PictBridge connecting (71) 101 Recording folder (51) • This does not appear when using the internal memory. 101 Playback folder (38) • This does not appear when using the internal memory. Remaining internal memory capacity (22) Remaining “Memory Stick” capacity (22), Display Indication 8/8 12/12 Image number/Number of images recorded in selected folder (38) C:32:00 Self-diagnosis display (88) 00:00:12 Counter (t step 6 in “Read This First”)

D

Display Indication Do not disconnect the cable for multi-use terminal/the USB cable (72) +2.0EV EV level value (31) ISO number (34) Metering mode (33) Flash White balance (34) 500 Shutter speed (27) F3.5 Aperture value (27) Playback image (t step 6 in “Read This First”)

E

Display Indication Histogram (21, 31) • appears when histogram display is disabled. 200511Recording date/time of the playback image (47) DPOF Menu/Guide menu (29) BACK/ Select images

NEXT

VOLUME Adjust volume,

Changing the screen display

Each time you press the (Display/LCD • A large difference in the histogram displayed Enjoying the camera on/off) button, the display changes as when shooting and during playback may occur follows. when: – The flash strobes. – The shutter speed is slow or high. • The histogram may not appear for images Histogram on recorded using other cameras. • When you set the LCD screen to Off, the digital

VGA

96 zoom does not function (page 46) and [AF Mode] is set to [Single] (page 46). When you select (flash mode)/ (self-timer)/ (macro), the image is displayed for about two S AF Histogram display seconds. (page 31) Indicators off S AF LCD screen off Indicators on

VGA

S AF • When you set the histogram display to on, image information is displayed during playback. • The histogram does not appear: When shooting in the following situations – The menu is displayed. – Recording movies. During playback in the following situations – The menu is displayed. – In index mode. – You are using playback zoom. – You are rotating still images. – Playback of movies.,

Number of still images and recording time of

movies The tables show the approximate number of still images and the length of time for movies that can be recorded on a “Memory Stick” formatted with this camera. The values may vary depending on the shooting conditions. The number of images that can be recorded using this internal memory is equivalent to that of a 32 MB “Memory Stick”.

The number of still images (The image quality is [Fine] on the upper line and

[Standard] on the lower line.) (Images) Capacity Size 32MB 64MB 128MB 256MB 512MB 1GB 2GB 4M 16 32 65 119 242 494 1012 30 60 121 216 440 898 1841 3:2 16 32 65 119 242 494 1012 30 60 121 216 440 898 1841 3M 20 41 82 148 302 617 1266 37 74 149 264 537 1097 2250 1M 50 101 202 357 726 1482 3038 93 187 376 649 1320 2694 5524 VGA(E-Mail) 196 394 790 1428 2904 5928 12154 491 985 1975 3571 7261 14821 30385 • The number of images listed is for when [Mode] is set to [Normal]. • The size of a single still image is 1M when [Mode] is set to [Multi Burst]. • When the number of remaining shootable images is greater than 9,999, the “>9999” indicator appears. • You can resize the images later ([Resize], (page 41)).

The recording time of movies (hour : minute : second)

Capacity Size 32MB 64MB 128MB 256MB 512MB 1GB 2GB 640(Fine) – – – 0:02:57 0:06:02 0:12:20 0:25:18 640(Standard) 0:01:27 0:02:56 0:05:54 0:10:42 0:21:47 0:44:27 1:31:09 160 0:22:42 0:45:39 1:31:33 2:51:21 5:47:05 11:44:22 24:18:25 • Movies with the size set to [640(Fine)] can be only recorded on a “Memory Stick PRO”. • For image size and image quality, see page 13. • When images recorded using earlier Sony models are played back on this camera, the display may differ from the actual image size.,

When you do not have a “Memory Stick”

(Recording with the internal memory) The camera has 32 MB of internal memory. This memory is not removable. Even when there Enjoying the camera is no “Memory Stick” inserted in the camera, you can record images using this internal memory. • Movies with the image size set to [640(Fine)] cannot be recorded using the internal memory.

When a “Memory Stick” (not supplied) is

inserted [Recording]: Images are recorded on the “Memory

B Stick”.[Playback]: Images on the “Memory Stick” are played

back. [Menu, Setup, etc.]: Various functions can be performed on images on the “Memory Stick”.

When there is no “Memory Stick” inserted

[Recording]: Images are recorded using the internal memory.

B Internal [Playback]: Images stored in the internal memory are memory played back.

[Menu, Setup, etc.]: Various functions can be performed on images in the internal memory.

On image data stored in the internal memory

We recommend that you copy (back up) data without fail using one of the following methods.

To copy (back up) data on a “Memory Stick”

Prepare a “Memory Stick” with a capacity of 32 MB or more, then perform the procedure explained in [Copy] (page 52).

To copy (back up) data on a hard disc of your computer

Perform the procedure on pages 58 to 62 without a “Memory Stick” inserted in the camera. • You cannot move image data on a “Memory Stick” to the internal memory. • By connecting the camera and a computer with a cable for multi-use terminal (DSC-S90/S80/S60) or Cyber-shot Station (DSC-ST80), you can copy data stored in the internal memory to a computer, but you cannot copy data on a computer to the internal memory.,

Battery life and number of images that can be

recorded/viewed The tables show the approximate number of *1 Supplied with DSC-S90/DSC-S80 images that can be recorded/viewed and the *2 Supplied with DSC-S60 battery life when you shoot images in *3 Supplied with DSC-ST80 [Normal] mode with batteries at full capacity and at an ambient temperature of • Shooting in the following situations: 25°C (77°F). The numbers of images that – (P.Quality) is set to [Fine] can be recorded or viewed take into account – [AF Mode] is set to [Single] changing the “Memory Stick” as necessary. – Shooting once every 30 seconds Note that the actual numbers may be less – The zoom is switched alternately between the than those indicated depending on the W and T ends conditions of use. – The flash strobes once every two times • The battery capacity decreases as the number of – The power turns on and off once every ten uses increases and also over time (page 93). times • The number of images that can be recorded/ • The measurement method is based on the CIPA viewed and the battery life are decreased under standard. the following conditions: (CIPA: Camera & Imaging Products – The surrounding temperature is low Association) – The flash is used • Number of shooting image does not change – The camera has been turned on and off many depending on the image size. times When viewing still images – The zoom is used frequently – [LCD Backlight] is set to [Bright] Battery No. of images Battery life – [AF Mode] is set to [Monitor] (Approx.) (min.) (Approx.) – The battery power is low DSC-S90

When shooting still images NH-AA-DA 9000 450

No. of Battery (Ni-MH)*1 Battery LCD screen images life (min.) Alkaline*2 5300 260(Approx.) (Approx.) Battery pack 10500 520 DSC-S90 NP-NH25*3 NH-AA-DA On 420 210 DSC-S80/ST80/S60 (Ni-MH)*1 Off 590 295 NH-AA-DA 10000 500 Alkaline*2 On 80 40 (Ni-MH)*1 Off 150 75 Alkaline*2 7000 350 Battery pack On 490 245 Battery pack 11800 590 NP-NH25*3 NP-NH25*3Off 700 350 DSC-S80/ST80/S60 *1 Supplied with DSC-S90/DSC-S80 NH-AA-DA On 440 220 * Supplied with DSC-S60 (Ni-MH)*1 *3 Supplied with DSC-ST80Off 590 295 *2 • Viewing single images in order at about three Alkaline On 100 50 second intervals Off 150 75 Battery pack On 510 255 NP-NH25*3 Off 700 350, Enjoying the camera

When shooting movies

Battery LCD screen On LCD screen Off (Approx.) (Approx.) DSC-S90 NH-AA-DA 210 min. 300 min. (Ni-MH)*1 Alkaline*2 60 min. 120 min. Battery pack 240 min. 360 min. NP-NH25*3 DSC-S80/ST80/S60 NH-AA-DA 220 min. 300 min. (Ni-MH)*1 Alkaline*2 90 min. 120 min. Battery pack 260 min. 360 min. NP-NH25*3 *1 Supplied with DSC-S90/DSC-S80 *2 Supplied with DSC-S60 *3 Supplied with DSC-ST80 • Shooting movies continuously with an image size of [160],

Using the mode dial

Set the mode dial to the desired function. Mode dial : Shooting movies Control button t step 5 in “Read This First” : Playback/Edit t step 6 in “Read This First”

Still image shooting modes

: Auto adjustment mode Allows easy shooting with the settings adjusted automatically. t step 5 in “Read This First” : Scene Selection mode Allows you to shoot with preset settings according to the scene. t step 5 in “Read This First”

P: Program auto shooting mode

Allows you to shoot with the exposure adjusted automatically (both the shutter speed and the aperture value). Also you can select various settings using the menu. (For details on the functions available t page 30)

M: Manual exposure shooting mode

Allows you to shoot after adjusting the exposure manually (both the shutter speed and the aperture value) (page 27). Also, you can select the various settings using the menu. (For details on the functions available t page 30), Enjoying the camera

Scene Selection

For details t step 5 in “Read This First” For shooting an image appropriately according to the scene condition, a combination of functions is determined by the camera. ( : you can select the desired setting) Macro Flash AF range finder Focus preset White Balance Burst/Multi Burst — — SL Auto — 0.5m/1.0m — Center AF — 3.0m/7.0m / / — /

To adjust the exposure manually

1 Press z on the control button when the mode dial is set to M. The “Set” indicator at the lower left of the screen changes to “Return,” and the camera enters the manual exposure setup mode. 2 Adjust the settings using the control button. b/B: Aperture (F value) v/V: Shutter speed VGA FINE M 98 “Return” Aperture value Return SAF 250 F2.8 0EV Shutter speed When the zoom is set fully to the W side, you can select an aperture, F2.8 or F5.6. When the zoom is set fully to the T side, you can select an aperture, F5.2 or F10. You can select a shutter speed from 1/1000 to 30 seconds. The difference between the settings and proper exposure judged by the camera appears as an EV value (page 31) on the screen. 0EV indicates the value judged as the most suitable by the camera. 3 Shoot the image. • To use the Quick Review, close-up (Macro), or self-timer function, or to change the flash mode, press z to cancel the manual exposure setup mode after step 1. (The “Return” indicator changes to “Set”.) • The flash is set to (Forced flash) or (No flash)., • Shutter speeds of one second or longer are indicated by [”], for example, 1”. • When you set the shutter speed slower, using a tripod is recommended to prevent the effects of vibration. • If you select shutter speeds of 1/6 second or slower, the NR slow shutter function activates automatically to reduce the picture noise and “NR” appears. • If you select slow shutter speeds, it takes time to process the data., Using the menu Using the menu v/V/b/B button Mode dial z button MENU button Control button 1 Turn on the power and set the mode dial. Items available vary depending on the mode dial position. 2 Press MENU to display the menu. 3 Select the desired menu item with b/B on the control button. 200 • If the desired item is invisible, keep pressing b/B 80 until it appears on the screen. Auto

ISO

• Press z after selecting an item when the mode dial WB ISO is set to . 4 Select the setting with v/V. The setting you select is zoomed and is set. 5 Press MENU to turn off the menu. • If there is an item that is not displayed, an v/V mark appears on the edges of the location where menu items usually appear. To display an item that is not displayed, select the mark with the control button. • You cannot select items that are grayed out.,

Menu items For details on the operation t page 29

Mode dial position: P M Scene

Menu for shooting (page 31)

(EV) — — — 9 (Focus) — — (Metering Mode) — — WB (White Bal) — — ISO — — — (P.Quality) — — — Mode (REC Mode) — — M (Interval) — — — (Flash Level) — — — PFX (P.Effect) — — (Saturation) — — — — (Contrast) — — — — (Sharpness) — — — — (Setup) —

Menu for viewing (page 38)

(Folder) — — — — — - (Protect) — — — — — DPOF — — — — — (Print) — — — — — (Slide) — — — — — (Resize) — — — — — (Rotate) — — — — — (Divide) — — — — — (Setup) — — — — — Trimming — — — — —,

Shooting menu For details on the operation t page 29

The default settings are marked with . Using the menu (EV) Manually adjusts the exposure. Toward – Toward + M +2.0EV Toward +: Brightens an image. 0EV The exposure is determined automatically by the camera. m –2.0EV Toward –: Darkens an image. • For details on the exposure t page 11 • The compensation value can be set in 1/3EV increments. • If a subject is being shot in extremely bright or dark conditions, or the flash is used, the exposure adjustment may not be effective. z Adjusting [EV] by displaying a histogram FINE 101 A histogram is a graph showing the brightness of VGAP4an image. Set the mode dial to P or Scene in A advance, then press repeatedly to display the histogram. The graph display indicates a bright 0EV image when skewed to the right side, a dark B image when skewed to the left side. A histogram Dark Bright can be used to check the exposure and adjust [EV]. A Number of pixels B Brightness • The histogram also appears in the following cases, but you cannot adjust the exposure. – When the mode dial is set to or M – When playing back a single image – During Quick Review,

For details on the operation t page 29

9 (Focus) You can change the focus method. Use the menu when it is difficult to get the proper focus in auto focus mode. (unlimited distance) Focuses on the subject using a previously set distance to the subject. (Focus preset) 7.0m • When shooting a subject through a net or through window glass, 3.0m it is difficult to get the proper focus in auto focus mode. In these cases, use of [Focus] is convenient. 1.0m 0.5m Center AF Focuses automatically on a subject near the center of the ( ) frame. • Using this with the AF lock function lets you shoot in the desired image composition.

VGAFINE

AF range finder frame AF range finder frame S AF indicator Multi AF Focuses automatically on a subject in all ranges of the finder (Multipoint AF) frame. (Still image ) • This mode is useful when the subject is not in the center of the (Movie ) frame.

VGAFINE

AF range finder frame AF range finder frame S AF indicator • AF stands for Auto Focus. • Distance setting information in [Focus] is approximate. If you point the lens up or down, the error increases. • The distance selection is limited according to the Scene mode (page 27). • When you are shooting movies, [Multi AF] is recommended as the AF works even with a certain amount of vibration. • When you use [Digital Zoom] or [AF Illuminator], priority AF movement is given to subjects in or near the center of the frame. In this case the or indicator flashes and the AF range finder frame is not displayed.,

For details on the operation t page 29

Using the menu z If the subject is out of focus When shooting with the subject at the edge of the frame (or the screen), or when using [Center AF], the camera may not focus on a subject at the edge of the frame. In a case like this, do as follows. 1 Recompose the shot so that the subject is centered in the AF range finder, and press the shutter button halfway down to focus on the subject (AF lock). VGA FINE P 98 AE/AF lock indicator AF range finder frame S AF F2.8 30 As long as you do not press the shutter button fully down, you can retry the procedure as many times as you want. 2 When the AE/AF lock indicator stops flashing and remains on, return to the fully composed shot, and press the shutter button fully down.

VGAFINE

S AF F2.8 30 (Metering Mode) Selects the metering mode that sets which part of the subject to measure to determine the exposure. Spot (Spot metering) Measures only a part of the subject. ( ) • This function is useful when the subject is backlit or when there is strong contrast between the subject and the background. VGA FINE Spot metering cross hairs Positions on the subject. SAF 250 F2.8 Multi (Multi-pattern Divides into multiple regions and measures each region. The metering) camera determines a well-balanced exposure. • For details on the exposure t page 11 • When using spot metering, setting [9] (Focus) to [Center AF] is recommended to focus on the metering position (page 32).,

For details on the operation t page 29 WB (White Bal)

Adjusts the color tones according to the lighting condition in a situation, for example, when the colors of a image look strange. n (Incandescent) Adjusts for places where the lighting conditions change quickly such as a party hall, or under bright lighting such as photography studios. WB (Fluorescent) Adjusts for fluorescent lighting. (Cloudy) Adjusts for a cloudy sky. (Daylight) Adjusts for outdoors, shooting night scenes, neon signs, fireworks, or sunrise, or conditions before and after sundown. Auto Adjusts the White Balance automatically. • For details on [WB] t page 12 • Under fluorescent lights that flicker, the white balance function may not work correctly even though you select WB (Fluorescent).

ISO

Selects a luminous sensitivity with units of ISO. The larger the number, the higher the sensitivity. 400 Select a large number when shooting in dark locations or shooting a subject moving at high speed, or select a small 200 number to obtain high image quality. Auto • For details on the [ISO] sensitivity t page 12 • Note that the image tends to become noisier as the ISO sensitivity number increases. • [ISO] is set to [Auto] in the Scene mode. (P.Quality) Selects the still image quality. Fine (FINE) Records with high quality (low compression). Standard (STD) Records with standard quality (high compression). • For details on the image quality t page 13,

For details on the operation t page 29

Using the menu

Mode (REC Mode)

Selects whether the camera performs continuous shooting or not when you press the shutter button. Multi Burst ( M ) Records 16 frames in succession as a still image file when you press the shutter button. • This is convenient for checking your form in sports, for example. • You can select the Multi Burst shutter interval in [Interval] mode (page 36). Burst ( ) Records the maximum number of images in succession (refer to the following table) when you press and hold down the shutter button. • When “Recording” disappears, you can shoot the next image. Normal Does not shoot continuously. On the [Multi Burst] • You can play back images shot with [Multi Burst] using the following procedure. – To pause/resume: Press z on the control button. – To play back frame-by-frame: Press b/B in pause mode. Press z to resume playback in series. • You cannot use the following functions in the [Multi Burst] mode: – Smart zoom – Flash – Inserting the date and time – Dividing a series of images shot with [Multi Burst] – Deleting a frame in a series of images shot with [Multi Burst] – Setting the frame interval to a mode other than [1/30] when the mode dial is set to – Setting the shutter speed to lower than 1/30 second when the mode dial is set to M • When playing back a series of images shot with [Multi Burst] using a computer or a camera not equipped with the Multi Burst function, the image is displayed as a single image with 16 frames. • The image size of images shot in the [Multi Burst] mode is 1M. • You may not be able to shoot images in the [Multi Burst] mode depending on the Scene mode (page 27). On the [Burst] • The flash is set to (No flash). • When recording with the self timer, a series of a maximum of five images is recorded. • When the mode dial is set to M, you cannot set the shutter speed in the [Burst] mode to 1/6 second or slower. • When the battery level is low, or when the internal memory or “Memory Stick” is full, the [Burst] stops. • You may not be able to shoot images in the [Burst] mode depending on the Scene mode (page 27).,

For details on the operation t page 29

The maximum number of continuous shots (Units: images) Quality Size Fine Standard 4M463:2463M471M 10 18 VGA(E-Mail) 30 30 M (Interval) Selects the frame interval in the [Multi Burst] mode (page 35). 1/7.5 (1/7.5") • This setting cannot be made when [Mode] (REC Mode) in the menu is set to other than [Multi Burst] (page 35). 1/15 (1/15") 1/30 (1/30") (Flash Level) Adjusts the amount of flash light. + ( +) Toward +: Makes the flash level higher. Normal – ( –) Toward –: Makes the flash level lower. • To change flash mode t step 5 in “Read This First”

PFX (P.Effect)

Allows you to shoot an image with special effects. B & W ( ) Records the image in monochrome (black and white). Sepia ( ) Records the image in sepia (like an old photograph). Off No effect. • This setting is not maintained when the power is turned off., For details on the operation t page 29 Using the menu (Saturation) Adjusts the saturation of the image. + ( ) Toward +: Brightens the color. Normal – ( ) Toward –: Darkens the color. (Contrast) Adjusts the contrast of the image. + ( ) Toward +: Enhances the contrast. Normal – ( ) Toward –: Reduces the contrast. (Sharpness) Adjusts the sharpness of the image. + ( ) Toward +: Sharpens the image. Normal – ( ) Toward –:Softens the image. (Setup) See page 45.,

Viewing menu For details on the operation t page 29

The default settings are marked with . (Folder) Selects the folder containing the image you want to play back (when using a “Memory Stick” only). OK See the following procedure. Cancel Cancels the selection. 1 Select the desired folder with b/B on the control button. Select Folder 102 2/2 Folder Name:102MSDCF No. Of Files: 9 Created: 2005111:05:34AM

OK

Cancel BACK/NEXT 2 Select [OK] with v, then press z. z On the [Folder] The camera stores images in a specified folder of a “Memory Stick” (page 51). You can change the folder or create a new one. • To create a new folder t [Create REC. Folder] (page 51) • To change the folder for recording images t [Change REC. Folder] (page 52) • When multiple folders are created in the “Memory Stick” and the first or last image in the folder is displayed, the following indicators appear. : Moves to the previous folder. : Moves to the next folder. : Moves to either the previous and next folders.,

For details on the operation t page 29

Using the menu - (Protect) Protects images against accidental erasure. Protect (-) See the following procedure. Exit Exits the Protection function.

To protect images in single-image mode

1 Display the image you want to protect. 2 Press MENU to display the menu. 3 Select [-] (Protect) with b/B on the control button, then press z. The image is protected and the - (protect) indicator appears on the image.

VGA

2/9 - Protect Exit BACK/NEXT 4 To protect other images, select the desired image with b/B, then press z.

To protect images in index mode

1 Press (index) to display the index screen. 2 Press MENU to display the menu. 3 Select [-] (Protect) with b/B on the control button, then press z. 4 Select [Select] with v/V, then press z. 5 Select the image you want to protect with v/V/b/B, then press z. A green - indicator appears on the selected image. - (green) • SELECT MENU TO NEXT 6 Repeat step 5 to protect other images. 7 Press MENU. 8 Select [OK] with B, then press z. The - indicator turns white. The selected images are protected. • To protect all images in the folder, select [All In This Folder] in step 4, and press z. Select [On] with B, then press z., For details on the operation t page 29

To cancel the protection

In single-image mode Press z in step 3 or 4 of “To protect images in single-image mode.” In index mode 1 Select the image for which you want to remove protection in step 5 of “To protect images in index mode.” 2 Press z to turn the - indicator gray. 3 Repeat the operation above for all images to be unprotected. 4 Press MENU, select [OK] with B, and then press z.

To cancel protection of all images in the folder

Select [All In This Folder] in step 4 of “To protect images in index mode,” and press z. Select [Off] with B, then press z. • Note that formatting the recording media erases all the data stored on it, even if images are protected, and these images cannot be recovered. • It may take some time to protect an image.

DPOF

Adds a (Print order) mark to images you want to print (page 73). (Print) See page 70. (Slide) Plays back recorded images in order (Slide show). Interval 3 sec Sets the slide show interval. 5 sec 10 sec 30 sec 1 min,

For details on the operation t page 29

Using the menu

Image

Folder Plays back all images in the selected folder. All Plays back all images stored on the “Memory Stick”.

Repeat

On Plays back images in a continuous loop. Off After all the images have been played back, the slide show ends. Start See the following procedure. Cancel Cancels the slide show. 1 Select [Interval], [Image] and [Repeat] with v/V/b/B on the control button. 2 Select [Start] with V/B, then press z. The slide show starts. To end the slide show, press z, select [Exit] with B, then press z. • During a slide show, you can display the previous/next image with b/B. • The [Interval] time is just a guideline, so it may vary depending on the image size, etc. (Resize) You can change the image size of a recorded image (Resize), and save it as a new file. The original image is retained even after resizing. 4M The setting size is just a guideline. t step 4 in “Read This First” 3M 1M

VGA

Cancel Cancels resizing. 1 Display the image you want to resize. 2 Press MENU to display the menu. 3 Select [ ] (Resize) with b/B, then press z. 4 Select the desired size with v/V, then press z. The resized image is recorded in the recording folder as the newest file. • For details on [Image Size] t step 4 in “Read This First” • You cannot change the size of movies or [Multi Burst] images. • When you change from a small size to a large size, the image quality deteriorates. • You cannot resize to an image size of 3:2. • When you resize a 3:2 image, the upper and lower black portions will be displayed on the image.,

For details on the operation t page 29

(Rotate) Rotates a still image. Rotates an image. See the following procedure. OK Determines the rotation. See the following procedure. Cancel Cancels rotation. 1 Display the image to be rotated. 2 Press MENU to display the menu. 3 Select [ ] (Rotate) with b/B on the control button, then press z. 4 Select [ ] with v, then rotate the image with b/B. 5 Select [OK] with v/V, then press z. • You cannot rotate protected images, movies, or [Multi Burst] images. • You may not be able to rotate images shot with other cameras. • When viewing images on a computer, the image rotation information may not be reflected depending on the software. (Divide) Cuts movies, or deletes unnecessary portions of movies. This is the recommended function to use when the internal memory or “Memory Stick” capacity is insufficient, or when you attach movies to your e-mail messages. • Note that the original movie is deleted and that number is skipped. Also note that you cannot restore files once you cut them. OK See the following procedure. Cancel Cancels division.,

For details on the operation t page 29

Using the menu

Example: Cutting a movie numbered 101_0002

This section describes an example of dividing a movie numbered 101_0002 and deleting it in the following file configuration. 101_0001 101_0003123101_0002 1 Cutting scene A. 1A2B3101_0002 Divide 101_0002 is divided into 101_0004 and 101_0005. 2 Cutting scene B. 101_000413A2B101_0005 Divide 101_0005 is divided into 101_0006 and 101_0007. 3 Deleting scenes A and B if they are unnecessary. 101_0004 101_000713A2B101_0006 Delete Delete 4 Only the desired scenes remain. 132101_0006

Procedure

1 Display the movie to be divided. 2 Press MENU to display the menu. 3 Select [ ] (Divide) with b/B on the control button, then press z. 4 Select [OK] with v, then press z. The playback of the movie starts.,

For details on the operation t page 29

5 Press z at the desired cutting point.

STD

640Divide 00:00:02 Dividing PointOKCancel Exit • When you want to adjust the cutting point, select [c/C] (frame rewind/forward) and adjust the cutting point using b/B. • If you want to change the cutting point, select [Cancel]. The playback of the movie starts again. 6 Select [OK] with v/V, and press z. 7 Select [OK] with v, then press z. The movie is cut. • The cut movies are assigned new numbers, and then recorded as the newest files in the selected recording folder. • You cannot cut the following kinds of images. – Still image – Movies not long enough to cut (shorter than about two seconds) – Protected movies (page 39) (Setup) See page 45.

Trimming

Records an enlarged image (t step 6 in “Read This First”) as a new file. Trimming See the following procedure. Return Cancels trimming. 1 Press MENU during playback zoom to display the menu. 2 Select [Trimming] with B on the control button, then press z. 3 Select the image size with v/V, then press z. The image is recorded, and the original image is displayed again. • The trimmed image is recorded as the newest file in the selected recording folder, and the original image is retained. • The quality of trimmed images may deteriorate. • You cannot trim to an image size of 3:2. • You cannot trim images displayed with Quick Review., Using the Setup screen

Using Setup items

You can change the default settings using the Setup screen. Using the Setup screen v/V/b/B button Mode dial z button MENU button Control button 1 Turn on the power. 2 Press MENU to display the menu. 3 Press B on the control button to select (Setup). 4 Press v/V/b/B on the control button to select the item you want to set. The frame of the selected item turns yellow. 5 Press z to enter the setting. To turn off the (Setup) screen, press MENU.

To cancel the (Setup) setting

Select [Cancel] if it appears, then press z on the control button. If it does not appear, select the previous setting again. • This setting is maintained even when the power is turned off.,

Camera 1 For details on the operation t page 45

The default settings are marked with .

AF Mode

Selects the auto focus operation mode. Single (S AF) Automatically adjusts the focus when the shutter button is pressed and held halfway down. This mode is useful for shooting stationary subjects. Monitor (M AF) Automatically adjusts the focus before the shutter button is pressed and held halfway down. This mode shortens the time needed for focusing. • Battery consumption is faster than in [Single] mode. • When shooting using the finder with the LCD screen off, the camera operates in the [Single] mode.

Digital Zoom

Selects the digital zoom mode. The camera enlarges the image using optical zoom (up to 3×). When the zoom scale exceeds 3×, the camera uses either smart or precision digital zoom. Smart Enlarges the image digitally with almost no distortion. This is (Smart zoom) not available when the image size is set to [4M] or [3:2]. ( ) • The maximum zoom scale of Smart zoom is shown in the following table. Precision Enlarges all image sizes up to a maximum of 6×, but the (Precision digital zoom) image quality deteriorates. ( ) Off ( ) Does not use the digital zoom. Image size and maximum zoom scale using Smart zoom Size Maximum zoom scale 4M – 3M Approx. 3.4× 1M Approx. 5.4× VGA(E-Mail) Approx. 10×,

For details on the operation t page 45

Using the Setup screen • When you press the zoom button, the zoom scaling indicator appears as follows. The W side of this line is the optical zoom area, and the T side is the digital zoom area Zoom scaling indicator • The maximum zoom scale of smart zoom/precision zoom includes the scale of the optical zoom. • The AF range finder frame does not appear when using the digital zoom. The or indicator flashes, and AF operates with priority on subjects located near the center of the frame. • When using the smart zoom, the image on the screen may look rough. However, this phenomenon has no effect on the recorded image.

Date/Time

Selects how to superimpose the date or time onto the image. Select this before shooting. • The date and time do not appear during shooting, instead, the indicator appears. The date and time appear in red on the lower-right corner of the screen during playback only. Day&Time Superimposes the date, hour, and minute. Date Superimposes the year, month and day. • The date is inserted in the order you select. (t step 2 “Set the clock” in “Read This First”) Off Does not superimpose the date and time. • You cannot insert the date and time into movies or images in the [Multi Burst] mode. • The date and time superimposed cannot be removed later.

Red Eye Reduction

Reduces the red-eye phenomenon when using the flash. Select this before shooting. On ( ) Reduces the red-eye phenomenon. • The flash pre-strobes twice or more before shooting. Off Does not use Red Eye Reduction. • Because it takes about a second until the shutter clicks, hold the camera firmly to prevent the effects of vibration. Also, do not let the subject move. • Red-eye reduction may not produce the desired effects depending on individual differences, the distance to the subject, if the subject does not see the pre-strobe, or other conditions.,

For details on the operation t page 45 AF Illuminator

The AF illuminator supplies fill light to focus more easily on a subject in dark surroundings. The AF illuminator emits red light allowing the camera to focus easily when the shutter button is pressed halfway, until the focus is locked. The ON indicator appears at this time. Auto Uses the AF illuminator. Off Does not use AF illuminator. • If the AF illuminator light does not reach the subject sufficiently or the subject has no contrast, focus will not be achieved. (A distance of up to approximately 3.5 m (137 7/8 inches) (W)/2.5 m (98 1/2 inches) (T) is recommended.) • Focus is achieved as long as the AF illuminator light reaches the subject, even if the light is slightly off the center of the subject. • When Focus preset is set (page 32), [AF Illuminator] does not function. • The AF range finder frame does not appear. The or indicator flashes, and AF operates with priority on subjects located near the center of the frame. • The AF illuminator does not operate when (Twilight mode) or (Landscape mode) is selected in the Scene mode. • The AF illuminator emits very bright light. Although there are no problems with safety, do not look directly into the AF illuminator emitter at close range.

Auto Review

Displays the recorded image on the screen for approximately two seconds immediately after shooting a still image. On Use the Auto Review. Off Does not use Auto Review. • You cannot shoot the next image during the Auto Review display. If you press the shutter button halfway down during this period, the recorded image display disappears and you can immediately shoot the next image.,

Camera 2 For details on the operation t page 45

The default settings are marked with . Using the Setup screen Enlarged Icon Enlarges the setting indicator temporarily when you press (Flash mode), (Self-timer), or (Macro). On Enlarges the indicators. Off Does not enlarge the indicators.,

Internal Memory Tool For details on the operation t page 45

This item does not appear when a “Memory Stick” is inserted in the camera. The default settings are marked with . Format Formats the internal memory. • Note that formatting irrevocably erases all data in the internal memory, including even protected images. OK See the following procedure. Cancel Cancels the formatting. 1 Select [OK] with v on the control button, then press z. The message “All data in internal memory will be erased Ready?” appears. 2 Select [OK] with v, then press z. The format is complete.,

Memory Stick Tool For details on the operation t page 45

This item appears only when a “Memory Stick” is inserted in the camera. Using the Setup screen The default settings are marked with .

Format

Formats the “Memory Stick”. A commercially available “Memory Stick” is already formatted, and can be used immediately. • Note that formatting irrevocably erases all data on a “Memory Stick”, including even protected images. OK See the following procedure. Cancel Cancels the formatting. 1 Select [OK] with v on the control button, then press z. The message “All data in Memory Stick will be erased Ready?” appears. 2 Select [OK] with v, then press z. The format is complete.

Create REC. Folder

Creates a folder in a “Memory Stick” for recording images. OK See the following procedure. Cancel Cancels folder creation. 1 Select [OK] with v on the control button, then press z. The folder creation screen appears. Create REC. Folder Creating REC. folder 102MSDCF Ready?

OK

Cancel 2 Select [OK] with v, then press z. A new folder is created with a number incremented one higher than the largest number, and the folder becomes the current recording folder. • For details on the folder, see page 38. • When not creating a new folder, the “101MSDCF” folder is selected as the recording folder. • You can create folders designated up to “999MSDCF.” • Images are recorded in the newly created folder until a different folder is created or selected. • You cannot delete a folder with the camera. To delete a folder, use your computer, etc. • Up to 4,000 images can be stored in one folder. When the folder capacity is exceeded, a new folder is automatically created. • For more information, see “Image file storage destinations and file names” (page 63).,

For details on the operation t page 45 Change REC. Folder

Changes the folder currently used for recording images. OK See the following procedure. Cancel Cancels changing the recording folder. 1 Select [OK] with v on the control button, then press z. The folder selection screen appears. Select REC. Folder 102 2/2 Folder Name:102MSDCF No. Of Files: 0 Created: 2005111:05:34AM

OK

Cancel BACK/NEXT 2 Select the desired folder with b/B, and [OK] with v, then z. • You cannot select the “100MSDCF” folder as a recording folder. • You cannot move recorded images to a different folder.

Copy

Copies all images in the internal memory to a “Memory Stick”. OK See the following procedure. Cancel Cancels the copying. 1 Insert a “Memory Stick” having 32 MB or larger capacity. 2 Select [OK] with v on the control button, then press z. The message “All data in internal memory will be copied Ready?” appears. 3 Select [OK] with v, then press z. Copying starts. Copying 102_COPY • Use batteries with enough capacity or the AC Adaptor (not supplied). If you attempt to copy image files using batteries with little remaining charge, the batteries may run out, causing copying to fail or possibly corrupting the data. • You cannot copy individual images. • The original images in the internal memory are retained even after copying. To delete the contents of the internal memory, remove the “Memory Stick” after copying, then execute the [Format] command in Internal Memory Tool (page 50). • You cannot select a folder copied on a “Memory Stick”. • The setting of (Print order) marks is not copied even when you copy data.,

Setup 1 For details on the operation t page 45

The default settings are marked with . Using the Setup screen LCD Backlight Selects the brightness of the LCD backlight when using the camera with batteries. Bright Brightens. Normal Dark Darkens. • Selecting [Bright] uses up the battery charge faster. Beep Selects the sound produced when you operate the camera. Shutter Turns on the shutter sound when you press the shutter button. On Turns on the beep/shutter sound when you press the control button/ press the shutter button. Off Turns off the beep/shutter sound. Language Selects the language to be used to display the menu items, warnings, and messages. Initialize Initializes the setting to the default setting. OK See the following procedure. Cancel Cancels the resetting. 1 Select [OK] with v on the control button, then press z. The message “Initialize all settings Ready?” appears. 2 Select [OK] with v, then press z. The settings are reset to the default setting. • Make sure that the power is not disconnected during resetting.,

Setup 2 For details on the operation t page 45

The default settings are marked with . File Number Selects the method used to assign file numbers to images. Series Assigns numbers to files in sequence even if the recording folder or the “Memory Stick” is changed. (When the replaced “Memory Stick” contains a file with a number higher than the last assigned number, a number one higher than the largest number is assigned.) Reset Starts from 0001 each time the folder is changed. (When the recording folder contains a file, a number one higher than the largest number is assigned.) USB Connect Selects the USB mode to be used when connecting the camera to a computer or a PictBridge compliant printer using the cable for multi-use terminal (DSC-S90/S80/S60) or Cyber-shot Station (DSC-ST80). PictBridge Connects the camera to a PictBridge compliant printer (page 70). PTP When [PTP] (Picture Transfer Protocol) is set and the camera is connected to a computer, the images in the recording folder selected by the camera are copied to the computer. (Compatible with Windows XP and Mac OS X.) Normal Connects the camera to a computer (page 59). Video Out Sets the video signal output according to connected equipment. NTSC Sets the video output signal to NTSC mode (e.g., for the USA, Japan). PAL Sets the video output signal to PAL mode (e.g., for Europe)., For details on the operation t page 45 Using the Setup screen Clock Set Sets the date and time. OK Select [OK] with v on the control button, and press z. Then, perform the procedure explained in “Set the clock” (t step 2 in “Read This First”). Cancel Cancels setting the clock., Using your computer

EnjoyingyourWindowscomputer

For details on using a Macintosh computer, refer to “Using your Macintosh computer” (page 67). Copying images to your computer (page 58) Preparation Viewing images on your Installing the USB driver. computer • Installation of the USB driver is not needed when using Windows XP. Enjoying images using “PicturePackage” (page 65) Viewing images saved on your Installing “PicturePackage” computer (page 65). Storing images on a CD-R Creating a Music video/ Slideshow Printing images Creating a video CD using “ImageMixer” (page 65) Creating a video CD “ImageMixer VCD2” is installed automatically when “PicturePackage” is installed., Using your computer • A separate software application for operating

Recommended computer the recording device is required in order to write

environment to CD-Rs. The following environment is Notes on connecting your camera to a recommended for a computer connected to computer the camera. • Operations are not guaranteed for all the

Recommended environment for recommended computer environments

mentioned above. copying images • If you connect two or more USB devices to a OS (pre-installed): Microsoft Windows 98, single computer at the same time, some devices, Windows 98SE, Windows 2000 including your camera, may not operate, Professional, Windows Millennium depending on the types of USB devices you are Edition, Windows XP Home Edition, or using. Windows XP Professional • Operations are not guaranteed when using a • Operation is not assured in an environment USB hub. based on an upgrade of the operating • Connecting your camera using a USB interface systems described above or in a multi-boot that is compatible with Hi-Speed USB (USB 2.0 environment. compliant) allows advanced transfer (high speed transfer) as this camera is compatible with Hi- CPU: MMX Pentium 200 MHz or faster Speed USB (USB 2.0 compliant). USB connector: Provided as standard • There are two modes for a USB connection Display: 800 × 600 dots or more, High Color when connecting a computer, [Normal] (default setting) and [PTP] modes. This section (16-bit color, 65,000 colors) or more describes the [Normal] mode as an example. For details on [PTP], see page 54.

Recommended environment for using • When your computer resumes from the suspend

“PicturePackage”/“ImageMixer or sleep mode, communication between your

VCD2” camera and your computer may not recover at

the same time. Software: Macromedia Flash Player 6.0 or later, Windows Media Player 7.0 or later, DirectX 9.0b or later Sound card: 16-bit stereo sound card with speakers Memory: 64 MB or more (128 MB or more is recommended.) Hard Disk: Disk space required for installation—approximately 500 MB Display: Video card (Direct Draw driver compliant) with 4 MB of VRAM • For automatic creation of a Music video/ Slideshow (page 65), a Pentium III 500 MHz or faster CPU is required. • When using “ImageMixer VCD2,” a Pentium III 800 MHz or faster CPU is recommended. • This software is compatible with DirectX technology. “DirectX” must be installed for use.,

Copying images to your computer

This section describes the process using a The “InstallShield Wizard” screen Windows computer as an example. appears. You can copy images from the camera to • If the install menu screen does not appear, your computer as follows. double-click (My Computer) t (PICTUREPACKAGE).

For a computer with a “Memory Stick”

slot 3 Click [Next]. Remove the “Memory Stick” from the camera and insert the “Memory Stick” into the “Memory Stick” slot of the computer, then copy the images.

For a computer without a “Memory Stick” slot

Follow Stages 1 through 5 on pages 58 to 62 to copy images. The USB driver installation starts. • Screens when copying images on a “Memory When the installation is finished, the Stick” to a computer are used as examples. screen informs you of completion.

Stage 1: Installing the USB 4 Click the radio button next to Driver [Yes, I want to restart my

computer now] to select it, then • A driver is software that enable equipment click [Finish]. connected to the computer to operate properly. • When using Windows XP, start from Stage 2. • When “PicturePackage” is already installed, Stage 1 is unnecessary. 1 NOTE: Do not connect the camera to the computer at this time. 2 Your computer restarts. Now, you can 1 Shut down all application establish a USB connection. software in use. • In Windows 2000, log on as Administrator Remove the CD-ROM when the installation (authorized Administrators). is completed. 2 Insert the CD-ROM into the computer, then click [USB Driver] when the install menu screen appears., Using your computer

Stage 2: Preparing the camera

and the computer 1 Insert a “Memory Stick” with recorded images into the camera. • When copying images in the internal To the multi memory, this step is unnecessary. connector 2 Insert the batteries with enough capacity remained in the camera, Cable for multi-use or connect the camera to a wall terminal outlet (wall socket) with the AC Adaptor (not supplied). • When you copy images to your computer using insufficient batteries, copying may fail or image data may be corrupted if the batteries shut off too soon. • For DSC-ST80, also refer to the operating To a USB connector instructions “Cyber-shot Station”. 3 Set the mode dial to , then turn • With Windows XP, the AutoPlay wizard on the camera and the computer. appears on the desktop. “USB Mode Normal” appears on the screen of the camera. POWER USB Mode Normal Access Memory Stick indicators* Switch on MENU When a USB connection is established for the first time, your computer automatically runs a program to recognize the camera. Wait for a while.

Stage 3: Connecting the camera * During communication, the access indicators

and your computer turn red. Do not operate the computer until the indicators turn white. • If “USB Mode Normal” does not appear, set • For DSC-ST80, also refer to the operating [USB Connect] to [Normal] (page 54). instructions “Cyber-shot Station”.,

Stage 4-A: Copying images to a

computer 3 Click the check box of unwanted images to remove the checkmark so they are not copied, then click • For Windows 98/98SE/2000/Me, follow the procedure explained in “Stage 4-B: Copying [Next]. images to a Computer” on page 61. This section describes an example of copying images to a “My Documents” 1 folder. 1 After making a USB connection in Stage 3, click [Copy pictures to a folder on my computer using Microsoft Scanner and Camera Wizard] [OK] as the wizard The “Picture Name and Destination” t screen appears. screen appears automatically on the desktop. 4 Select a name and destination for the images, then click [Next]. The “Scanner and Camera Wizard” 2 screen appears. Image copying starts. When the copying 2 Click [Next]. is completed, the “Other Options” screen appears. The images saved on the “Memory • This section describes an example of Stick” of the camera appear. copying images to the “My Documents” • If no “Memory Stick” is inserted, images in folder. the internal memory appear., Using your computer 5 Click the radio button next to 1 Double-click [My Computer] t [Nothing. I'm finished working [Removable Disk] t [DCIM]. with these pictures] to select it, then click [Next]. • If the “Removable Disk” icon is not The “Completing the Scanner and displayed, see page 83. Camera Wizard” screen appears. 6 2 Double-click the folder where the Click [Finish]. image files you want to copy are The wizard screen closes. stored. • To continue copying other images, Then, right-click an image file to disconnect the cable for multi-use terminal display the menu and click (DSC-S90/S80/S60) or Cyber-shot Station [Copy]. (DSC-ST80) (page 63) and reconnect it. Then follow the procedure explained in “Stage 3: Connecting the camera and your computer” on page 59.

Stage 4-B: Copying images to a Computer 2

• For Windows XP, follow the procedure explained in “Stage 4-A: Copying images to a computer” on page 60. This section describes an example of • On the storage destination of the image copying images to the “My Documents” files, see page 63 folder., 3 Double-click the [My Documents] 1 Click [Start] t [My Documents]. folder. Then, right-click on the “My Documents” window to 2 display the menu and click [Paste]. The contents of the “My Documents” folder are displayed. • If you are not using Windows XP, double-click [My Documents] on the desktop. The image files are copied to the “My Documents” folder. • When an image with the same file name 2 Double-click the desired image exists in the copy destination folder, the overwrite confirmation message appears. file. When you overwrite an existing image with a new one, the original file data is deleted. To copy an image file to the computer without overwriting, change the file name to a different name and then copy the image file. However, note that if you change the file name, you may not be able to play back that image with your camera (page 64).

Stage 5: Viewing images on

your computer This section describes the procedure for The image is displayed. viewing copied images in the “My Documents” folder.

To delete the USB connection

• For DSC-ST80, also refer to the operating instructions “Cyber-shot Station”. Perform the following procedure when: • Disconnecting the cable for multi-use terminal • Removing a “Memory Stick” • Inserting a “Memory Stick” after copying images from the internal memory • Turning off the camera, Using your computer x For Windows 2000/Me/XP Example: viewing folders on Windows XP 1 Double-click on the tasktray. Double-click here 2 Click (Sony DSC) t [Stop]. 3 Confirm the device on the confirmation window, then click [OK]. 4 Click [OK]. A • Step 4 is unnecessary for Windows XP. 5 Disconnect the cable for multi-use B terminal, remove the “Memory Stick”, or turn off the camera. When you copy images from a “Memory Stick” after copying images in the internal memory to C the computer, insert the “Memory Stick”. A Folder containing image data recorded x For Windows 98/98SE using a camera not equipped with the 1 Confirm that the access indicators (page folder creating function 59) are white. B Folder containing image data recorded 2 Disconnect the cable for multi-use using this camera terminal, remove the “Memory Stick”, or When not creating any new folders, there turn off the camera. When you copy is only the “101MSDCF” folder. images from a “Memory Stick” after There is only the “101_SONY” folder in copying images in the internal memory to case of the internal memory. the computer, insert the “Memory Stick”. C Folder containing movie data, etc., recorded using a camera not equipped with the folder creating function

Image file storage destinations • You cannot record any images to the

and file names “100MSDCF” or “MSSONY” folders. The The image files recorded with your camera images in these folders are available only for viewing. are grouped as folders on the “Memory • For more information about folders, see pages Stick”. 38, 51. • Image files are named as follows. ssss stands for any number within the range from 0001 to 9999. The numerical portions of the name of a movie file recorded in movie mode and its corresponding index image file are the same. – Still image files: DSC0ssss.JPG – Movie files: MOV0ssss.MPG – Index image files that are recorded when you record movies: MOV0ssss.THM,

Viewing image files stored on a computer with

your camera (using a “Memory Stick”) This section describes the process using a Windows computer as an example. 2 Copy the image file to the When an image file copied to a computer “Memory Stick” folder in the no longer remains on a “Memory Stick”, you can view that image again on the following order. camera by copying the image file on the 1Right-click the image file, then click computer to a “Memory Stick”. [Copy]. 2Double-click [Removable Disk] or • Step 1 is not necessary if the file name set with [Sony MemoryStick] in [My your camera has not been changed. Computer]. • You may be unable to play back some images depending on the image size. 3Right-click the [sssMSDCF] folder • When an image file has been processed by a in the [DCIM] folder, then click [Paste]. computer or when the image file was recorded • sss stands for any number within the using a model other than that of your camera, range from 100 to 999. playback on your camera is not guaranteed. • When there is no folder, first create a folder with your camera (page 51) and then copy the image file. 1 Right-click the image file, then click [Rename]. Change the file name to “DSC0ssss.” Enter a number from 0001 to 9999 for ssss. • If the overwrite confirmation message appears, enter a different number in step 1. • An extension may be displayed depending on the computer settings. The extension for still images is JPG, and the extension for movies is MPG. Do not change the extension.,

Using the supplied software

This section describes the process using a Using your computer Windows computer as an example. 1 Turn on your computer, and insert the CD-ROM (supplied) into the

Overview of the supplied CD-ROM drive.

software The installation menu screen appears. The supplied CD-ROM contains two • If it does not appear, double-click (My software applications: “PicturePackage” Computer) t (PICTUREPACKAGE). and “ImageMixer.” PicturePackage 2 Click [PicturePackage]. The “Choose Setup Language” screen

A

appears.

B C

D 3 Select the desired language, then click [Next] twice. This section describes the English screen. The “License Agreement” screen What you can do: appears. A Burning Video CD Read the agreement carefully. If you The “ImageMixer VCD2” screen appears. accept the terms of the agreement, click B Music Video/Slideshow Producer the radio button next to [I accept the terms of the license agreement] and then C Save the images on CD-R click [Next]. D Viewing video and pictures on PC How to start up the functions: 4 Follow the instructions on the Click one of A-D, then click the button at the lower right of the screen. screen to complete the installation. • “ImageMixer VCD2” and “DirectX” will be

Installing the software installed if you have not yet installed them.

You can install the “PicturePackage” and • When the restarting confirmation message “ImageMixer VCD2” software using the appears, restart the computer following the following procedure. instructions on the screen. • If you have not yet installed the USB driver (page 58), do not connect the camera to the computer before you install the “PicturePackage” software (except for Windows XP). • In Windows 2000/XP, log on as Administrator. • When “PicturePackage” is installed, the USB driver is installed automatically., 5 Remove the CD-ROM as the shortcut icons of “PicturePackage Menu” and “PicturePackage destination Folder” are displayed after the installation.

To start up the software

• Double-click the “PicturePackage Menu” icon on the desktop.

For information on the use of the

software Click [?] at the upper-right corner of each screen to show the on-line help. Technical support for “PicturePackage”/“ImageMixer VCD2” is provided by the Pixela User Support Center. For more information, refer to the information included on the CD-ROM.,

Using your Macintosh computer

You can copy images to your computer and camera and your computer may not recover at Using your computer create a video CD using “ImageMixer the same time. VCD2” (supplied).

Copying and viewing images on Recommended environment a computer

OS (pre-installed): Mac OS 9.1, 9.2, or Mac OS X (v10.0-v10.3) 1 Prepare the camera and a USB connector: Provided as standard Macintosh computer.

Recommended computer environment Perform the same procedure as that

for using “ImageMixer VCD2” described in “Stage 2: Preparing the OS (pre-installed): Mac OS X (v10.1.5 or camera and the computer” on page 59. later) CPU: iMac, eMac, iBook, PowerBook, Power Mac G3/G4 series 2 Connect the cable for multi-use Memory: 128 MB or more (256 MB or more terminal. is recommended.) Hard Disk: Disk space required for Perform the same procedure as that installation - approximately 250 MB described in “Stage 3: Connecting the Display: 1024 × 768 dots or more, 32,000 camera and your computer” on page 59. colors or more • For DSC-ST80, also refer to the operating • QuickTime 4 or later must be pre-installed. instructions “Cyber-shot Station”. (QuickTime 5 or later is recommended.)

Notes on connecting your camera toa3Copy image files to the Macintosh

computer computer. • Operations are not guaranteed for all the recommended computer environments 1Double-click the newly recognized icon mentioned above. t [DCIM] t the folder where the • If you connect two or more USB devices to a images you want to copy are stored. single computer at the same time, some devices, 2Drag and drop the image files to the including your camera, may not operate hard disk icon. depending on the types of USB devices you are The image files are copied to the hard using. disk. • Operations are not guaranteed when using a • For details on the storage location of the USB hub. images and file names, see page 63. • Connecting your camera using a USB interface that is compatible with Hi-Speed USB (USB 2.0 compliant) allows advanced transfer (high speed transfer) as this camera is compatible with Hi- 4 View images on the computer. Speed USB (USB 2.0 compliant). Double-click the hard disk icon t the • There are two modes for a USB connection desired image file in the folder when connecting a computer, [Normal] (the containing the copied files to open that default setting) and [PTP] modes. This section image file. describes the [Normal] mode as an example. For details on [PTP], see page 54. • When your computer resumes from the suspend or sleep mode, communication between your,

To disconnect the cable for multi-use 6 After the user information screen appears,

terminal/ remove the “Memory Stick”/ enter the desired name and password. turn off the camera The installation of the software starts. Drag and drop the drive icon or the icon of To start up “ImageMixer VCD2” the “Memory Stick” to the “Trash” icon, then remove the cable for the multi-use Open [Image Mixer] in [Application], then terminal, remove the “Memory Stick”, or double-click [ImageMixer VCD2]. turn off the camera. For information on the use of the • If you are using Mac OS X v10.0, perform the procedure above after you have turned your software computer off. Click [?] at the upper-right corner of each screen to show the on-line help.

Creating a video CD using Technical support for “ImageMixer

“ImageMixer VCD2” VCD2” is provided by the Pixela User Support Center. For more information, refer to the information included on the CD-ROM. • You can create an image file that is compatible with the video CD creation function. To save the data in the video CD format on a CD-R, you need Toast (not supplied) by Roxio.

To install “ImageMixer VCD2”

• Shut down all other application software before you install “ImageMixer VCD2.” • The display settings should be 1024 × 768 dots or higher and 32,000 colors or higher. 1 Turn on your Macintosh computer, and insert the CD-ROM (supplied) into the CD-ROM drive. 2 Double-click the CD-ROM icon. 3 Copy the [IMXINST.SIT] file in the [MAC] folder to the hard disk icon. 4 Double-click the [IMXINST.SIT] file in the copy-to folder. 5 Double-click the extracted [ImageMixer VCD2_Install] file., Printing still images

How to print still images

Printing still images Printing directly using a PictBridge compliant printer (page 70) You can print images by connecting the camera directly to a PictBridge compliant printer. Printing directly using a “Memory Stick” compliant printer You can print images with a “Memory Stick” compliant printer. For details, see the operating instructions supplied with the printer. Printing using a computer You can copy images to a computer using the supplied “PicturePackage” software and print the images. Printing at a shop (page 73) You can take a “Memory Stick” containing images shot with your camera to a photo printing service shop. You can make a (Print order) mark on images that you want to print out in advance.,

Printing images directly using a PictBridge compliant

printer Even if you do not have a computer, you can print images shot using your camera by Stage 1: Preparing the camera connecting the camera directly to a Prepare the camera to connect it to the PictBridge compliant printer. printer with the cable for multi-use terminal. MENU button • “PictBridge” is based on the CIPA standard. (CIPA: Camera & Imaging Products Association) Index button

In single-image mode

You can print a single image on a printing sheet. Control Button • It is recommended to use an AC Adaptor (not supplied) to prevent the power from turning off partway through printing. 1 Press MENU to display the menu.

In index mode

You can print several images at a reduced size on a printing sheet. You can print a set 2 Press B on the control button to of either the same images (1) or different select (Setup). images (2). 123Select [ ] (Setup2) with V, then select [USB Connect] with v/V/B. 4 Select [PictBridge] with B/v, then press z. • An index print function may not be provided depending on the printer. • The quantity of images that can be printed as an index image differ depending on the printer. • You cannot print movies. • If the indicator flashes on the screen of the camera for about five seconds (error notification), check the connected printer. The USB mode is set. • Connecting the camera to the printer when [PictBridge] is not selected turns off the LCD screen. Be sure to set [USB Connect] to [PictBridge]., Printing still images

Stage 2: Connecting the camera Stage 3: Printing

to the printer Regardless of what the mode dial is set to, • For DSC-ST80, refer to the operating the print menu appears when you complete instructions “Cyber-shot Station”. Stage 2. 1 Connect the multi connector on 1 Select the desired printing your camera and the USB jack on method with v/V on the control the printer with the cable for button, then press z. multi-use terminal (supplied with [All In This Folder] DSC-S90/S80/S60). Prints all the images in the folder. [DPOF image] To the multi connector Prints all the images with a (Print order) mark (page 73) regardless of the displayed image. [Select] Cable for multi-use Selects images and prints all the terminal/USB cable selected images. 1Select the image you want to print with To the USB jack b/B, then press z. The mark appears on the selected image. • To select other images, repeat this procedure. 2Select [Print] with V, then press z. 2 [This image]Turn on your camera and the Prints a displayed image. printer. • If you select [This image] and set [Index] to After the connection is made, [On] in step 2, you can print a set of the the indicator appears same images as an index image. Print All In 2 Select print settings with v/V/b/B. This Folder DPOF image Select This image Cancel Print Index Off Size Default The camera is set to playback mode, Date Off Quantity 1 then an image and the print menu appear Exit OK on the screen. [Index] Select [On] to print as an index image., [Size] To print other images Select the size of the printing sheet. After step 3, select [Select] and the desired [Date] image with v/V, then perform from step 1. Select [Day&Time] or [Date] to insert To print images on the index screen the date and time on images. Perform “Stage 1: Preparing the camera” • When you choose [Date], the date will be (page 70) and “Stage 2: Connecting the inserted in the order you select (t step 2 in camera to the printer” (page 71), then “Read This First”). This function may not be provided depending on the printer. proceed with the following. When you connect the camera to a printer, [Quantity] the print menu appears. Select [Cancel] to When [Index] is set to [Off]: turn off the print menu, then proceed as Select the number of sheets of an image follows. that you want to print. The image will 1 Press (Index). be printed as a single image. The index screen appears. When [Index] is set to [On]: 2 Press MENU to display the menu. Select the number of sets of images that 3 Select [ ] (Print) with B, then press z. you want to print as an index image. 4 Select the desired printing method with If you selected [This image] in step 1, b/B, then press z. select the number of the same image you want to print side by side on a sheet as an index image. Print All In • The designated number of images may not This Folder all fit onto a single sheet depending on the DPOF imageSelect quantity of images. Cancel [Select] 3 Select [OK] with V/B, then press Selects images and prints all the selected z. images. Select the image you want to print with v/ The image is printed. V/b/B, then press z to display the • Do not disconnect the USB cable while the mark. (Repeat this procedure to select (Do not disconnect the cable for other images.) Then, press MENU. multi-use terminal/the USB cable) indicator appears on the screen. [DPOF image] Prints all the images with a (Print order) mark regardless of the displayed indicator image. Printing 2/3 [All In This Folder] Exit Prints all the images in the folder. 5 Perform steps 2 and 3 of “Stage 3: Printing” (page 71).,

Printing at a shop

You can take a “Memory Stick” containing Printing still images images shot with your camera to a photo Marking in single-image mode printing service shop. As long as the shop supports photo printing services conforming to the DPOF, you can make a (Print order) mark on images in advance so that you do not need to reselect them when you print them out at the shop. Control button • You cannot print images stored in the internal memory at a print shop directly from the MENU button camera. Copy the images to a “Memory Stick”, then take the “Memory Stick” to the print shop.

What is DPOF? 1 Display the image you want to

DPOF (Digital Print Order Format) is a print. function allowing you to make a (Print order) mark on images that you want to print out later. 2 Press MENU to display the menu. • You can also print the images with the (Print order) mark using a printer that conforms to the DPOF (Digital Print Order Format) standard or using a PictBridge compliant printer. 3 Select DPOF with b/B, then press • You cannot mark movies. z. • When you mark images shot in [Multi Burst] A (Print order) mark is marked on mode, all the images are printed on one sheet divided into 16 panels. the image.

VGA When taking a “Memory Stick” to a 101 2/9

shop • Consult your photo printing service shop as to what types of “Memory Stick” they handle. DPOFExit • If a “Memory Stick” is not handled by your BACK/NEXT photo printing service shop, copy the images you want to print out to other medium such as a CD-R and take it to the shop. 4 To mark other images, display the • When taking a “Memory Stick Duo”, be sure to desired image with b/B, then take the Memory Stick Duo Adaptor with it. • Before you take image data to a shop, always press z. copy (back up) your data to a disk. • You cannot set the number of prints.

To remove the mark in single-image

mode Press z in step 3 or 4., To cancel, select [Cancel] in step 4 or select

Marking in index mode [Exit] in step 8, then press z.

1 To remove the mark in index modeDisplay the index screen. (t step Select the images from which you want to 6 in “Read This First”) remove the mark in step 5, then press z. 2 To remove all the marks in the folderPress MENU to display the menu. Select [All In This Folder] in step 4, then press z. Select [Off], then press z. 3 Select DPOF with b/B, then press z. 4 Select [Select] with v/V, then press z. • You cannot add a mark in [All In This Folder]. 5 Select the image you want to mark with v/V/b/B, then press z. A green mark appears on the selected image. Green mark SELECT MENU TO NEXT 6 Repeat step 5 to mark other images. 7 Press MENU. 8 Select [OK] with B, then press z. The mark turns white., Connecting your camera to your TV

Viewing images on a TV screen

You can view images on a TV screen by Connecting your camera to your TV connecting the camera to a TV. 3 Set the mode dial to , and turn on the camera. Turn off both your camera and the TV before connecting the camera and the TV VGA29Mode dial/ with the A/V cable. • For DSC-ST80, refer to the operating instructions “Cyber-shot Station”. 101-0002 20051110:30PM BACK/NEXT VOLUME 1 Connect the cable for multi-use terminal (supplied with DSC-S90/ S80/S60) to the multi connector of the camera and the audio/video input jacks of a TV. Control button Images shot with the camera appear on To audio/video input the TV screen. jacks Press b/B on the control button to select the desired image. • When using your camera abroad, it may be necessary to switch the video signal output to match that of your TV system (page 54). To multi connector Cable for multi- use terminal • Place the camera with the screen facing upwards. • If your TV has stereo input jacks, connect the audio plug (black) of the cable for multi-use terminal to the left audio jack. 2 Turn on the TV and set the TV/ video input switch to “video.” • For details, see the operating instructions supplied with the TV.,

On TV color systems

If you want to view images on a TV screen, you need a TV with a video input jack and the cable for multi-use terminal (supplied with DSC-S90/S80/S60) or the A/V connecting cable (supplied with DSC- ST80). The color system of the TV must match that of your digital still camera. Check the following lists:

NTSC system

Bahama Islands, Bolivia, Canada, Central America, Chile, Colombia, Ecuador, Jamaica, Japan, Korea, Mexico, Peru, Surinam, Taiwan, the Philippines, the U.S.A., Venezuela, etc.

PAL system

Australia, Austria, Belgium, China, Czech Republic, Denmark, Finland, Germany, Holland, Hong Kong, Hungary, Italy, Kuwait, Malaysia, New Zealand, Norway, Poland, Portugal, Singapore, Slovak Republic, Spain, Sweden, Switzerland, Thailand, United Kingdom, etc.

PAL-M system

Brazil

PAL-N system

Argentina, Paraguay, Uruguay

SECAM system

Bulgaria, France, Guiana, Iran, Iraq, Monaco, Russia, Ukraine, etc., Troubleshooting

Troubleshooting

If you experience trouble with your camera, try the following solutions. Troubleshooting 1 Check the items on pages 78 to 87. If a code such as “C/E:ss:ss” appears on the screen, see page 88. 2 Remove the batteries, and insert the batteries again after about one minute, and turn on the power. 3 Initialize the settings (pages 53) 4 Consult your Sony dealer or local authorized Sony service facility. Please understand that you give your consent that the contents of the internal memory may be checked when you send your camera to be repaired.,

Batteries and power

For DSC-ST80, also refer to the operating instructions “Cyber-shot Station”. The battery remaining indicator is incorrect, or sufficient battery remaining indicator is displayed but the power runs out too quickly. • This phenomenon occurs when you use the camera in an extremely hot or cold location (page 93). • When using alkaline batteries/Oxy Nickel Primary Battery, the displayed time remaining may not be correctly indicated. • The batteries are discharged. Install charged batteries or replace with new ones (t step 1 in “Read This First”). • The poles of batteries or the terminals of battery cover are dirty so the batteries are not charged sufficiently. Clean them with a cotton swab, etc. (page 93). • When using nickel-metal hydride batteries, the displayed time remaining differs from the current one due to the memory effect (page 93), etc. Fully discharge and then charge the batteries to correct the display. • The batteries are dead (page 93). Replace them with new ones. The batteries run down too quickly. • Charge nickel-metal hydride batteries sufficiently (t step 1 in “Read This First”). • You are using the camera in an extremely cold location (page 93). • The batteries are dead (page 93). Replace them with new ones. Cannot turn on the camera. • Install the batteries correctly (t step 1 in “Read This First”). • The batteries are discharged. Install charged batteries or replace with new ones (t step 1 in “Read This First”). • The batteries are dead (page 93). Replace them with new ones. The power turns off suddenly. • If you do not operate the camera for about three minutes while the power is on, the camera turns off automatically to prevent wearing down the batteries. Turn on the camera again (t step 2 in “Read This First”). • The batteries are discharged. Install charged batteries or replace with new ones (t step 1 in “Read This First”).

Shooting still images/movies

The screen does not turn on even when the power is turned on. • Turn on the screen (page 21)., Troubleshooting Your camera cannot record images. • Check the free capacity of the internal memory or “Memory Stick” (page 18). If they are full, do one of the following: – Delete unnecessary images (t step 6 in “Read This First”) – Change the “Memory Stick”. • Set the write-protect switch on the “Memory Stick” to the recording position (page 91). • You cannot record images while charging the flash. • Set the mode dial to an other position than and when shooting still images. • Set the mode dial to when shooting movies. • The image size is set to [640(Fine)] when recording movies. Do one of the following: – Set the image size to other than [640(Fine)]. – Insert a “Memory Stick PRO” (page 91). The subject is not visible on the screen. • Set the mode dial to an other position than (page 26). Recording takes a long time. • The NR slow shutter function is activated (page 27). This is not a malfunction. The image is out of focus. • The subject is too close. Record in the close-up (Macro) recording mode. Make sure to position the lens farther away from the subject than the shortest shooting distance, approximately 10 cm (4 inches) (W)/50 cm (19 3/4 inches) (T), when shooting (t step 5 in “Read This First”). • (Twilight mode) or (Landscape mode) is selected as the Scene mode when you shoot still images. • The Focus preset function is selected. Select the auto focus mode (page 32). • Refer to “If the subject is out of focus” on page 33. Zoom does not work. • You cannot change the zoom scale when shooting movies. Precision digital zoom does not function. • Set [Digital Zoom] to [Precision] (page 46). • This function cannot be used while shooting movies. Smart zoom does not function. • Set [Digital Zoom] to [Smart] (page 46). • This function cannot be used when: – The image size is set to [4M] or [3:2]. – Shooting in [Multi Burst] mode. – Shooting movies., The flash does not work. • The flash is set to (No flash) (t step 5 in “Read This First”). • You cannot use the flash when: – [Mode] (REC Mode) is set to [Burst] or [Multi Burst] (page 35). – (Twilight mode) or (Candle mode) of the Scene mode, or (movie) is selected. • Set the flash to (Forced flash) (t step 5 in “Read This First”) to shoot still images when (Landscape mode), (Snow mode), or (Beach mode) is selected as the Scene mode. The close-up (Macro) function does not work. • (Twilight mode), (Landscape mode), or (Candle mode) is selected for the Scene mode (page 27). The date and time are recorded incorrectly. • Set the correct date and time (t step 2 in “Read This First”). The F value and shutter speed flash when you press and hold the shutter button halfway down. • The exposure is incorrect. Correct the exposure (page 31). The image is too dark. • You are shooting a subject with a light source behind the subject. Select the metering mode (page 33) or adjust the exposure (page 31). • The brightness of the screen is too low. Adjust the brightness of the LCD backlight (page 53). • Turn on the screen (page 21). The image is too bright. • You are shooting a spotlighted subject in a dark location such as on a stage. Adjust the exposure (page 31). • The brightness of the screen is too bright. Adjust the brightness of the LCD backlight (page 53). The image colors are not correct. • Picture Effect function is activated. Cancel the Picture Effect function (page 36). Vertical streaks appear when you are shooting a very bright subject. • The smear phenomenon is occurring. This phenomenon is not a malfunction. Noise appears in the image when you view the screen in a dark place. • The camera is attempting to increase the visibility of the screen by temporarily brightening the image under conditions of low illumination. There is no effect on the recorded image., Troubleshooting The eyes of the subject come out red. • Set [Red Eye Reduction] in the (Setup) menu to [On] (page 47). • Shoot the subject at a distance closer than the recommended shooting distance using the flash (t step 5 in “Read This First”). • Light the room and shoot the subject. The image seen through the finder does not indicate the actual recordable range. • The parallax phenomenon is occurring when the subject is close. To confirm the recordable range, use the screen. Cannot shoot images in succession. • The internal memory or the “Memory Stick” is full. Delete unnecessary images (t step 6 in “Read This First”). • The battery level is low. Install charged batteries or replace with new ones. Unknown pattern appears on the finder. • This is due to the structure of the finder. This is not a malfunction.

Viewing images

Refer to “Computers” (page 82) in conjunction with the following items. Your camera cannot play back images. • Set the mode dial to (page 26). • The folder/file name has been changed on your computer. • When an image file has been processed by a computer or when the image file was recorded using a model other than that of your camera, playback on your camera is not guaranteed. • The camera is in USB mode. Delete the USB communication (page 62). The image appears rough right after playback starts. • The image may appear rough right after playback starts due to image processing. This is not a malfunction. The image does not appear on the TV screen. • Check [Video Out] to see if the video output signal of your camera is set to the color system of your TV (page 54). • Check whether the connection is correct (page 75). • The cable for multi-use terminal is connected. Disconnect it according to the correct procedure (page 62)., The image does not appear on the screen. • If the cable for multi-use terminal is connected, disconnect it (page 75).

Deleting/Editing images

Your camera cannot delete an image. • Cancel the protection (page 40). • Set the write-protect switch on the “Memory Stick” to the recording position (page 91). You have deleted an image by mistake. • Once you have deleted an image, you cannot restore it. We recommend that you set protection on an image (page 39), or set the write-protect switch on the “Memory Stick” to the LOCK position (page 91) to prevent accidental erasure. The resizing function does not work. • You cannot resize movies and Multi Burst images. You cannot display a DPOF (Print order) mark. • You cannot display DPOF (Print order) marks on movies. You cannot cut a movie. • The movie is not long enough to cut (shorter than about two seconds). • Cancel the protection (page 40). • Still images cannot be cut.

Computers

You do not know if the OS of your computer is compatible with the camera. • Check “Recommended computer environment” (page 57) for Windows, and “Recommended environment” (page 67) for Macintosh. You cannot install the USB driver. • In Windows 2000, log on as Administrator (authorized Administrators) (page 58). Your computer does not recognize your camera. • Turn on the camera (t step 2 in “Read This First”). • When the battery level is low, install the charged batteries, replace the batteries with new ones (t step 1 in “Read This First”), or use the AC Adaptor (not supplied) (page 15). • Use the cable for multi-use terminal (DSC-S90/S80/S60) or Cyber-shot Station (DSC-ST80) (page 59)., Troubleshooting • Disconnect the cable for multi-use terminal (DSC-S90/S80/S60) or Cyber-shot Station (DSC- ST80) from both the computer and the camera, and connect it again firmly. Make sure that “USB Mode Normal” is displayed (page 59). • Set [USB Connect] to [Normal] in the (Setup) menu (page 54). • Disconnect all equipment other than the camera, the keyboard and the mouse from the USB connectors of your computer. • Connect the camera directly to your computer without passing through a USB hub or other device (page 59). • The USB driver is not installed. Install the USB driver (page 58). • Your computer does not properly recognize the device because you connected the camera and your computer with the cable for multi-use terminal (DSC-S90/S80/S60) or Cyber-shot Station (DSC-ST80) before you installed the “USB Driver” from the supplied CD-ROM. Delete the erroneously recognized device from your computer, then install the USB driver (see the next item). The Removable disk icon does not appear on the computer screen when you connect your computer to the camera. • Follow the procedure below to install the USB driver again. The following procedure is for a Windows computer. 1 Right-click [My Computer] to display the menu, then click [Properties]. The “System Properties” screen appears. 2 Click [Hardware] t [Device Manager]. • For Windows 98/98SE/Me, click the [Device Manager] tab. The “Device Manager” appears. 3 Right-click [ Sony DSC], then click [Uninstall] t [OK]. The device is deleted. 4 Install the USB driver (page 58). You cannot copy images. • Connect the camera and your computer correctly using the supplied cable for multi-use terminal (DSC-S90/S80/S60) or Cyber-shot Station (DSC-ST80) (page 59). • Follow the designated copy procedure for your OS (pages 60, 67). • You may not be able to shoot using a “Memory Stick” formatted by a computer. Shoot using a “Memory Stick” formatted by your camera (page 51). After making a USB connection, “PicturePackage” does not start automatically. • Start up the “PicturePackage Menu” and check [Settings]. • Make the USB connection after the computer is turned on (page 59). The image cannot be played back on a computer. • If you are using “PicturePackage,” click on help at the upper-right corner of each screen. • Consult the computer or software manufacturer., The image and sound are interrupted by noise when you view a movie on a computer. • You are playing back the movie directly from the internal memory or the “Memory Stick”. Copy the movie to the hard disk of your computer, then play back the movie from the hard disk (page 58). You cannot print an image. • Check the printer settings. Images once copied to a computer cannot be viewed on the camera. • Copy them to a folder recognized by the camera, such as “101MSDCF” (page 63). • Operate correctly (page 64). “Memory Stick” Cannot insert a “Memory Stick”. • Insert it in the correct direction (t step 3 in “Read This First”). Cannot record on a “Memory Stick”. • Set the write-protect switch on the “Memory Stick” to the recording position (page 91). • The “Memory Stick” is full. Delete unnecessary images (t step 6 in “Read This First”). • Insert a “Memory Stick PRO” (page 22) when recording movies with the image size set to [640(Fine)]. Cannot format a “Memory Stick”. • Set the write-protect switch on the “Memory Stick” to the recording position (page 91). You have formatted a “Memory Stick” by mistake. • All the data on the “Memory Stick” is deleted by formatting. You cannot restore it. We recommend that you set the write-protect switch on the “Memory Stick” to the LOCK position to prevent accidental erasure (page 91).

Internal memory

The camera or your computer cannot play back the data in the internal memory. • There is a “Memory Stick” inserted in the camera. Remove it (t step 3 in “Read This First”). Cannot record images using the internal memory. • There is a “Memory Stick” inserted in the camera. Remove it (t step 3 in “Read This First”)., Troubleshooting The free capacity of the internal memory does not increase even when you copy the data stored in the internal memory to a “Memory Stick”. • The data is not deleted after copying. Execute the [Format] command (page 50) to format the internal memory after copying the data. Cannot copy the data stored in the internal memory to a “Memory Stick”. • The “Memory Stick” is full. Check the capacity. Cannot copy the data on the “Memory Stick” or the computer to the internal memory. • Data on a “Memory Stick” or a computer cannot be copied to the internal memory.

PictBridge compliant printer

A connection cannot be established. • The camera cannot be connected directly to a printer that is not compliant with the PictBridge standard. Consult the printer manufacturer as to whether the printer is compliant with PictBridge or not. • Check that the printer is turned on and can be connected to the camera. • Set [USB Connect] to [PictBridge] in the (Setup) menu (page 54). • Disconnect and connect the cable for multi-use terminal (DSC-S90/S80/S60) or Cyber-shot Station (DSC-ST80) again. If an error message is indicated on the printer, refer to the operating instructions supplied with the printer. The LCD screen turns off when you connect the camera to the pritner. • Set [USB Connect] to [PictBridge], and then connect the camera again (page 70). Cannot print images. • Check that the camera and the printer are properly connected using the cable for multi-use terminal (DSC-S90/S80/S60) or Cyber-shot Station (DSC-ST80). • Turn on the printer. For further information, refer to the operating instructions supplied with it. • If you select [Exit] during printing, images may not print. Disconnect and connect the cable for multi-use terminal (DSC-S90/S80/S60) or Cyber-shot Station (DSC-ST80) again. If you still cannot print your images, disconnect the cable, turn the printer off and then on, then connect the cable again. • Movies cannot be printed. • Images shot using cameras other than this camera or images modified with a computer may not be printed., Printing is canceled. • You disconnected the cable for multi-use terminal (DSC-S90/S80/S60) or Cyber-shot Station (DSC-ST80) before the (Do not disconnect the cable for multi-use terminal/the USB cable) mark disappears. Cannot insert the date or print images in the index mode. • The printer does not provide these functions. Consult the printer manufacturer as to whether the printer provides these functions or not. • The date may not be inserted in the index mode depending on the printer. Consult the printer manufacturer. “- - -” is printed on the date-inserted part of the image. • Images that do not have the recording data cannot be printed with the date inserted. Set [Date] to [Off] and print the image again (page 72). Cannot select the print size. • Consult the printer manufacturer as to whether the printer can provide the desired size. Cannot print the image at the size selected. • Disconnect the cable for multi-use terminal (DSC-S90/S80/S60) or Cyber-shot Station (DSC- ST80) and reconnect it whenever you change the paper size after the printer has been connected to the camera. • The print setting of the camera differs from that of the printer. Change the setting of either the camera (page 72) or the printer. Cannot operate the camera after canceling printing. • Wait for a while as the printer is carrying out the cancellation. It may take some time depending on the printer.

Others

Your camera does not work. • Use the type of batteries you can use with this camera (page 93). • The battery level is low (The E indicator appears). Charge the batteries or replace with new ones (t step 1 in “Read This First”). The power is on, but the camera does not work. • The built-in microcomputer is not working properly. Remove the batteries, and then, after one minute, insert the batteries and turn on the camera. Cannot identify an indicator on the screen. • See page 17., Troubleshooting The lens gets fogged. • Moisture condensation has occurred. Turn off the camera and leave it for about an hour before using it (page 95). The camera becomes warm when you use it for a long time. • This is not a malfunction. The lens does not move when you turn off the camera. • The batteries are discharged. Charge the batteries or install new batteries (t step 1 in “Read This First”) or use the AC Adaptor (not supplied). The Clock Set screen appears when you turn on the camera. • Set the date and time again (t step 2 in “Read This First”).,

Warning indicators and messages Self-diagnosis display Messages

If a code starting with a letter of the If the following messages appear, follow alphabet appears, your camera has a self- the instructions. diagnosis display. The last two digits (indicated by ss) will differ depending on the state of the camera. Turn the power off and on again If you are unable to solve the problem even • A problem with the lens has caused an after trying the following corrective actions error. a few times, contact your Sony dealer or local authorized Sony service facility. E • The battery level is low. Charge the C:32: batteries (t step 1 in “Read This ss First”). Depending on the conditions of • There is trouble with your camera's use or the type of battery, the indicator hardware. Turn the power off and on may flash even though there are still 5 again. to 10 minutes of remaining battery time left. C:13: ss • The camera cannot read or write data. System error Turn off and on the power or re-insert • Turn the power off and then on again the “Memory Stick” several times. (t step 2 “Read This First”). • Format error has occurred in the internal memory or an unformatted “Memory Stick” is inserted. Format the media Internal memory error (pages 50, 51). • Turn the power off and then on again • The inserted “Memory Stick” cannot be (t step 2 “Read This First”). used with your camera, or the data is damaged. Insert a new “Memory Stick” (page 91). Memory Stick error • Insert the “Memory Stick” correctly. E:61: • The inserted “Memory Stick” cannot be ss used in your camera (page 91). E:91: • The “Memory Stick” is damaged.ss • The terminal section of the “Memory E:92: ss Stick” is dirty. • A camera malfunction has occurred. Initialize the camera (page 53), then Memory Stick type error turn the power on again. • The inserted “Memory Stick” cannot be used in your camera (page 91). Format error • Format the media again (pages 50, 51)., Troubleshooting Memory Stick locked File error • Set the write-protect switch on the • An error occurred while playing back “Memory Stick” to the recording the image. position (page 91). File protect No memory space in internal • Release the protection (page 40). memory No memory space in Memory Stick Image size over • Delete unnecessary images or files (t step 6 “Read This First”). • You are playing back an image of a size that cannot be played back on your camera. Read only memory • Your camera cannot record or delete images on this “Memory Stick”. Cannot divide • The movie is not long enough to be divided (shorter than about two No file seconds). • No images have been recorded in the • The file is not a movie. internal memory. Invalid operation No file in this folder • You are playing back a file that was • No images have been recorded in this created on equipment other than this folder. camera. • You did not operate correctly when copying images from your computer (page 64). (Vibration warning indicator) • Camera shake may occur due to insufficient light. Use the flash, mount Folder error the camera on a tripod, or otherwise • A folder with the same first three digit secure the camera in place. number already exists on the “Memory Stick”. (For example: 123MSDCF and 123ABCDE) Select other folders, or 640(Fine) is not available create a new folder (page 51). • 640(Fine) size movies can be recorded only using a “Memory Stick PRO”. Insert a “Memory Stick PRO” or set the Cannot create more folders image size to a size other than • The folder with a name beginning with [640(Fine)]. “999” exists on the “Memory Stick”. You cannot create any folders if this is the case. Cannot record • The camera cannot record images in the selected folder. Select a different folder (page 52)., Enable printer to connect • [USB Connect] is set to [PictBridge], • The data transmission to the printer may however the camera is connected to a not be completed yet. Do not disconnect non-PictBridge compliant device. the cable for multi-use terminal (DSC- Check the device. S90/S80/S60) or the USB cable (DSC- • The connection is not established. ST80). Disconnect and connect the cable for multi-use terminal (DSC-S90/S80/S60) or Cyber-shot Station (DSC-ST80) Processing again. If an error message is indicated • The printer is canceling the current print on the printer, refer to the operating job. You cannot print until it is finished. instructions supplied with the printer. This may take time, depending on the printer. Connect to PictBridge device • You tried to print images before the printer connection was established. Connect to a PictBridge compliant printer. No printable image • You tried to execute [DPOF image] without placing a DPOF (Print order) mark on the image(s). • You tried to execute [All In This Folder] while a folder that holds only movies was selected. You cannot print movies. Printer busy Paper error No Paper Ink error Low Ink No Ink • Check the printer. Printer error • Check the printer. • Check if the image you want to print is corrupted., Others

On the “Memory Stick”

A “Memory Stick” is a compact, portable Notes on using a “Memory Stick” (not Others IC recording medium. The types of supplied) “Memory Stick” that can be used with this • You cannot record, edit or delete images if you camera are listed in the table below. slide the write-protect switch to LOCK. However, proper operation cannot be guaranteed for all “Memory Stick” Terminal functions. “Memory Stick” type Recording/ Playback Write-protect Memory Stick a switch Memory Stick (MagicGate/ a*2*3 High-speed data transfer Labeling position compatible) Memory Stick Duo*1 a The position and/or the shape of the write- Memory Stick Duo a*2*3 protect switch may differ depending on the (MagicGate/High-speed data “Memory Stick” you use. transfer compatible)*1 • Do not remove the “Memory Stick” while reading or writing data. MagicGate Memory Stick *2a • Data may be corrupted in the following cases: MagicGate Memory Stick *2a – When the “Memory Stick” is removed or the Duo *1 camera is turned off during a read or write *2*3*4 operationMemory Stick PRO a – When the “Memory Stick” is used in Memory Stick PRO Duo*1 a*2*3*4 locations subject to static electricity or electrical noise *1When using a “Memory Stick Duo” with this • We recommend backing up important data. camera, be sure to insert it into a Memory Stick • Do not attach any other material than the Duo Adaptor. supplied label on the labeling position. *2“MagicGate Memory Stick” and “Memory • When you attach the supplied label, be sure to Stick PRO” are equipped with MagicGate attach it to the labeling position. Be careful that functions. MagicGate is copyright protection the label does not stick out. technology that uses encryption technology. • When you carry or store the “Memory Stick”, Data recording/playback that requires put it in the case supplied with it. MagicGate functions cannot be performed with this camera. • Do not touch the terminal of the “Memory *3 Stick” with your hand or a metal object.Supports high-speed data transfer using a parallel interface. • Do not strike, bend or drop the “Memory Stick”. *4640(Fine) size movies can be recorded. • Do not disassemble or modify the “Memory Stick”. • A “Memory Stick” formatted with a computer is • Do not expose the “Memory Stick” to water. not guaranteed to operate with this camera. • Do not use or store the “Memory Stick” under • Data read/write speeds differ depending on the the following conditions: combination of the “Memory Stick” and the – High temperature locations such as the hot equipment used. interior of a car parked in direct sunlight – Locations exposed to direct sunlight – Humid locations or locations with corrosive substances present,

Notes on using a “Memory Stick Duo”

(not supplied) • To use a “Memory Stick Duo” with the camera, be sure to insert the “Memory Stick Duo” into a Memory Stick Duo Adaptor. If you insert a “Memory Stick Duo” into a “Memory Stick” compliant device without a Memory Stick Duo Adaptor, you might not be able to remove it from the device. • When inserting a “Memory Stick Duo” into a Memory Stick Duo Adaptor, make sure the “Memory Stick Duo” is inserted facing in the correct direction. • When using a “Memory Stick Duo” inserted into a Memory Stick Duo Adaptor with the camera, make sure that the “Memory Stick Duo” is inserted facing the correct direction. Note that improper use may damage the equipment. • Do not insert a Memory Stick Duo Adaptor into a “Memory Stick” compliant device without a “Memory Stick Duo” attached. Doing so may result in malfunction of the unit. • To format a “Memory Stick Duo”, insert the “Memory Stick Duo” into the Memory Stick Duo Adaptor. • When the “Memory Stick Duo” is equipped with the write-protect switch, release its lock.

Note on using a “Memory Stick PRO”

(not supplied) • “Memory Stick PRO” media with a capacity of up to 2 GB have been confirmed to operate properly with this camera.,

On the battery charger and the batteries On the battery charger (supplied with Batteries you cannot use with your

Others

DSC-S90/S80) camera

• Do not charge any other batteries except Sony Manganese batteries Nickel-Metal Hydride batteries in the battery Lithium batteries charger supplied with your camera. If you try to Ni-Cd batteries charge any other type of battery (e.g., manganese batteries, alkaline dry cells, primary If you use the above batteries, we cannot lithium batteries, or Ni-Cd batteries) than the guarantee full performance of the camera by batteries specified, those batteries may leak, property of the batteries, such as brownout of the overheat, or explode, causing the danger of batteries. burns or other injuries. On Nickel-Metal Hydride batteries • Remove the charged batteries from the battery charger. If you keep charging them, there is a • Do not peel off the external seals or damage the danger of leaks, excessive heat, explosions, or batteries. Never use batteries from which the electric shock. seals have been partially or completely • When charging a high capacity battery other removed, or batteries that have been split in any than the supplied battery using the supplied way. These may cause leakage, explosion, or battery charger, the full capacity of the battery heat-up of the battery, and personal scald or may not be available. injury may be caused. These may cause a malfunction of the battery charger. • When the CHARGE lamp flashes, this may indicate a battery error or that batteries other • Always carry the Nickel-Metal Hidride batteries than the specified type have been inserted. in the battery case (supplied with DSC-S90/ Check that the batteries are the specified type. If S80). Otherwise, metallic objects may short the the batteries are the specified type, remove all + and - ends, resulting in the risk of heating or the batteries, replace them with new ones or fire. another ones and check if the battery charger • If the poles of the Nickel-Metal Hydride operates correctly. If the battery charger batteries are dirty, the batteries may not charge operates correctly, a battery error may have properly. Wipe them with a dry cloth, etc. occurred. • At the time of purchase, or when the Nickel- • If the battery charger is dirty, charging may not Metal Hydride batteries have not been used for a be performed successfully. Clean the battery long time, they may not full charge. This is charger with dry cloth, etc. typical of this type of battery, and is not a malfunction. If this happens, repeatedly using up the batteries fully, and then recharging them

Batteries you can use with your should correct the problem.

camera • If you recharge Nickel-Metal Hydride batteries before fully using up the existing charge, the HR 15/51:HR6 (size AA) Nickel-Metal Hydride low battery warning may be displayed sooner batteries (2) than expected. This is called the “memory • NH-AA-DA (2) (supplied with DSC-S90/S80) effect.”* If this problem occurs, charging the • NH-AA-2DB twin pack, etc. batteries only after using up the existing charge Battery pack NP-NH25 (supplied with DSC- will correct it. ST80) * The “memory effect” - the situation in which R6 (size AA) alkaline batteries (2) (supplied with the capacity of the battery is temporarily DSC-S60) lowered. ZR6 (size AA) Oxy Nickel Primary Battery (2) • To use up the batteries completely, put the camera in the slide show mode (page 40) and leave it that way until the batteries are used up. • Do not mix new and used batteries. • Do not expose the battery to water. The battery is not water-resistant.,

Effective use of Nickel-Metal Hydride • The battery remaining indicator may not display

batteries the correct information when using alkaline batteries/Oxy Nickel Primary Battery. • Batteries are discharged even when they are not • Due to characteristics of alkaline batteries/Oxy used. We recommend you charge the batteries Nickel Primary Battery, there is a large just before using them. difference between the available shooting time • Battery performance decreases in low- and the available playback time. For this reason, temperature surroundings, and the battery life is the camera may turn off with the lens portion shortened under such circumstances. To use the extended when you switch the mode dial. In this battery longer, we recommend you keep the case, replace the batteries with new ones or fully battery in its case in a pocket close to your body charged Nickel-Metal Hydride batteries. to warm it, and insert it in your camera just before you start shooting. Precautions on the battery pack NP- • If the poles of the batteries and the terminals on NH25 the battery cover of the camera are dirty, the battery life may be extremely shortened. • Refer to the operating instructions “Cyber-shot Occasionally wipe them with a dry cloth, etc. to Station”. keep them clean. • If you shoot a lot using the flash and the zoom, the battery power will be used up faster. • We recommend having spare batteries handy for two or three times the expected shooting time, and try test shooting before actually using the camera.

Battery life of Nickel-Metal Hydride

batteries • The battery life is limited. The battery capacity decreases little by little as you use it more and more, and as time passes. When the battery operating time seems to have been considerably shortened, a probable cause is that the batteries have reached the end of their life. • The battery life varies depending on storage, operating conditions, and environment, and is different for each battery.

On alkaline batteries/Oxy Nickel Primary Battery

• Alkaline batteries/Oxy Nickel Primary Battery have a shorter life compared to the Nickel-Metal Hydride batteries. For this reason, the power may turn off even though the battery remaining indicator shows sufficient battery life remaining. • Battery performance differs greatly depending on the manufacturer and the type of battery, and in some cases the battery life may be extremely short. This is especially true at low temperatures, and you may not be able to shoot at temperatures below 5°C (41°F). • Do not mix new and old batteries.,

Precautions

x Do not leave the camera in the x On moisture condensation Others following places If the camera is brought directly from a cold to a • In an extremely hot place warm location, moisture may condense inside or In places such as in a car parked in the sun, the outside the camera. This moisture condensation camera body may become deformed and this may cause a malfunction of the camera. may cause a malfunction. • Under direct sunlight or near a heater Moisture condensation occurs easily The camera body may become discolored or when: deformed, and this may cause a malfunction. • The camera is brought from a cold location such • In a location subject to rocking vibration as a ski slope into a warmly heated room • Near strong magnetic place • The camera is taken from an air-conditioned room or car interior to the hot outdoors, etc. • In sandy or dusty places Be careful not to let sand or dust get into the camera. This may cause the camera to How to prevent moisture condensation malfunction, and in some cases this malfunction When bringing the camera from a cold place to a cannot be repaired. warm place, seal the camera in a plastic bag and allow it to adapt to conditions at the new location x On cleaning over about an hour. Cleaning the LCD screen If moisture condensation occurs Wipe the screen surface with an LCD cleaning kit (not supplied) to remove fingerprints, dust, etc. Turn off the camera and wait about an hour for the moisture to evaporate. Note that if you attempt to shoot with moisture remaining inside the lens, you Cleaning the lens will be unable to record clear images. Wipe the lens with a soft cloth to remove fingerprints, dust, etc. x On the internal rechargeable battery Cleaning the camera surface This camera has an internal rechargeable battery Clean the camera surface with a soft cloth slightly for maintaining the date and time and other moistened with water, then wipe the surface with settings regardless of whether the power is on or a dry cloth. Do not use the following as they may off. damage the finish or the casing. This rechargeable battery is continually charged • Chemical products such as thinner, benzine, as long as you are using the camera. However, if alcohol, disposable cloths, insect repellent, or you use the camera for only short periods, it insecticide, etc. discharges gradually, and if you do not use the • Do not touch the camera with the above on your camera at all for about one month it becomes hand. completely discharged. In this case, be sure to • Do not leave the camera in contact with rubber charge this rechargeable battery before using the or vinyl for a long time. camera. However, even if this rechargeable battery is not x On operating temperatures charged, you can still use the camera as long as Your camera is designed for use under the you do not record the date and time. temperatures between 0°C and 40°C (32°F and 104°F). (In case of alkaline batteries/Oxy Nickel Charging method Primary Battery, the temperatures are between Insert batteries with enough capacity in the 5°C and 40°C (41°F and 104°F).) Shooting in camera, or connect the camera to a wall outlet extremely cold or hot places that exceed this range (wall socket) using the AC Adaptor (not is not recommended. supplied), and leave the camera for 24 hours or more with the power off.,

Specifications Camera [Power, general]

[System] Power HR15/51:HR6 (Size AA) Nickel-Metal Hydride batteries Image device 6.85 mm (1/2.7 type) color (2) (supplied with DSC-S90/ CCD, Primary color filter S80), 2.4 V Total pixel number of camera R6 (size AA) Alkaline batteries Approx. 4 231 000 pixels (2) (supplied with DSC-S60), 3 V Effective pixel number of camera Battery pack NP-NH25 (1) Approx. 4 065 000 pixels (supplied with DSC-ST80) Lens Carl Zeiss Vario-Tessar ZR6 (size AA) Oxy Nickel 3× zoom lens Primary Battery (2) (not f = 6.0 - 18.0 mm (39 - 117 mm supplied), 3 V when converted to a 35 mm still AC-LS5K AC Adaptor (not camera) supplied), 4.2 V F2.8 - 5.2 Power consumption Exposure control Automatic exposure, Manual (during shooting with the LCD screen on) exposure, Scene Selection (7 DSC-S90: 1.1 W modes) DSC-S80/ST80/S60: 1.0 W White balance Automatic, Daylight, Cloudy, Operating temperature Fluorescent, Incandescent 0°C to +40°C (+32°F to +104°F) File format (DCF compliant) Still images: Exif Ver. 2.2 Storage temperature JPEG compliant, DPOF –20°C to +60°C (–4°F to compatible +140°F) Movies: MPEG1 compliant Dimensions 96.6×64.4×40.1 mm (Monaural) (3 7/8×2 5/8×1 5/8 inches) Recording media Internal memory 32 MB (W/H/D, excluding maximum “Memory Stick” protrusions) Flash Recommended distance (ISO Mass DSC-S90: set to Auto): 0.2 m to 4.5 m Approx. 253 g (8 oz) (including (7 7/8 inches to 178 1/2 inches) two batterries and wrist strap) (W)/0.5 m to 2.5 m DSC-S80/ST80/S60: (19 3/4 inches to 98 1/2 inches) Approx. 249 g (8 oz) (including (T) two batterries and wrist strap) [Input and Output connectors] Microphone Electret condenser microphone Speaker Dynamic speaker Multi connector Exif Print Compatible USB communication PRINT Image Matching III Hi-Speed USB (USB 2.0 Compatible compliant) PictBridge Compatible [LCD screen] LCD panel DSC-S90: 6.2 cm (2.5 type) TFT drive DSC-S80/ST80/S60: 5.1 cm (2.0 type) TFT drive Total number of dots 115 200 (480×240) dots, Others BC-CS2A/CS2B Ni-MH battery charger (supplied with DSC-S90/S80) Power requirements AC 100 to 240 V, 50/60 Hz, 3 W Output voltage AA: DC 1.4V 400 mA × 2 AAA: DC 1.4 V 160 mA × 2 Operating temperature 0°C to +40°C (+32°F to +104°F) Storage temperature –20°C to +60°C (–4°F to +140°F) Dimensions Approx. 71×30×91 mm (2 7/8×1 3/16×3 5/8 inches) (W/H/D) Mass Approx. 90 g (3 oz) For DSC-ST80, also refer to the operating instructions “Cyber-shot Station”. Design and specifications are subject to change without notice.,

IInndedx ex A C Date/Time ...47

A/V cable...75 Cable for multi-use terminal Daylight ...34 Accessories supplied ... 59, 75 Delete t in “Read This First” Camera 1 ... 46 t step 6 in “Read This First” AE/AF indicator Camera 2 ... 49 t step 5 in “Read This Digital Zoom ...46Candle mode First” t step 5 in “Read This DirectX ...57 AF Illuminator ...48 First” Divide ...42 AF lock ...33 CD-ROM... 58 DPOF...73 AF Mode...46 Center AF... 32 AF range finder frame ...32 Change REC. Folder ... 52 E AF range finder frame indicator Charging battery pack Effective pixels ...96 ...32 t step 1 in “Read This Electronic transformer Aperture...11, 27 First” t step 1 in “Read This Auto adjustment mode Cleaning ... 95 First” t step 5 in “Read This Clock Set... 55 Enlarged Icon ...49 First” Cloudy... 34 Enlarging an image Auto Focus...10 t step 6 in “Read This Color ... 12 First” Auto power-off function Compression ratio ... 14 t step 2 in “Read This EV...31 First” Computer Exposure...11, 27 Auto Review ...48 Copying still images ... 58 Extension...64 Macintosh ... 67

B Recommended F

environment ... 57, 67 Back up...23 F value ...11, 27 Software... 65 Battery File name ...63 Viewing image stored on a Charging computer with your File Number...54 t step 1 in “Read This camera... 64 First” File strorage destination ...63 Windows ... 56 Install/Remove Fine...34 t step 1 in “Read This Connecting Flash Level ...36 First” Computer ... 59 Flash mode Remaining indicator Printer ... 71 t step 5 in “Read This t step 1 in “Read This TV... 75 First”First” Contrast ... 37 Fluorescent ...34Beach mode t step 5 in “Read This Copy... 52 Focus ...10, 32 First” Copying still images to your Focus preset...32 Beep...53 computer ... 58 Folder...38 Blur ...10 Create REC. Folder... 51 Changing ...52 Burst ...35 Creating...51

D Forced flash

Date... 47 t step 5 in “Read This First” Date&Time ... 47,

Index

Format...50, 51 LCD Backlight ... 53 Number of images/Recording LCD screen ...see “Screen” time...22

H

Histogram ...21, 31MOHolding the camera M AF ... 46 Optical zoom ...46 t step 5 in “Read This Macintosh computer... 67 OS ...57, 67 First” Recommended Overexposure...11

I environment ... 67

Macro P Identifying parts...15 t step 5 in “Read This P.Effect...36 Image file storage destinations First” PAL...54 and file names...63 Mains lead Image quality ...13, 34 t step 1 in “Read This Parallax ...81 First” PC ... see “Computer” Image size ...13 Manual exposure ... 27 PFX...36 t step 4 in “Read This First” “Memory Stick” ... 91 PictBridge ...70 ImageMixer VCD2 ...68 Insert/Remove Picture effect...36 t step 3 in “Read This Incandescent ...34 PicturePackage...65First” Index mode ...70 Pixel ...13Format ... 51 Index screen Playback ...see “Viewing”Number of images/ t step 6 in “Read This recording time... 22 Playback/Edit...26 First” Write-protect switch ... 91 Power cord Indicator... see “Screen” t step 1 in “Read This Memory Stick Tool ... 51 Initialize ...53 First” Menu ... 29 Install ...58, 65, 68 Precautions ...95 Items... 30 Internal memory...23 Precision digital zoom ...46 Shooting ... 31 Format ...50 Pressing halfway down ...10 Viewing... 38 Internal Memory Tool...50 t step 5 in “Read This Metering Mode... 33 First” Internal rechargeable battery...95 Mode ... 35 Print ...69 Interval ...36 Moisture condensation ... 95 Index mode...70 ISO...11, 12, 34 Monitor... 46 Single-image mode...70 Monochrome ... 36 Print order mark...73

J MPG ... 63 Printing at a shop ...73

JPG...63 Multi AF... 32 Printing directly ...70 Multi Burst ... 35 Program auto shooting...26

L Multi-pattern metering ... 33 Protect...39

Landscape mode Multipoint AF ... 32 PTP ...54 t step 5 in “Read This First” N Q Language...53 NR slow shutter... 28 Quick Review t step 2 in “Read This First” NTSC ... 54 t step 5 in “Read This First”,

R Still image V

t step 5 in “Read This REC Mode...35 First” VGA Red Eye Reduction...47 t step 4 in “Read This Shooting menu ... 31 First” Resize ...41 Shooting movies... 26 Video CD...65, 68 Rewind/Fast forward Shutter speed... 11, 27 t step 6 in “Read This Video Out ...54 First” Single ... 46 Viewing Rotate...42 Single-image mode ... 70 Movie Slide ... 40 t step 6 in “Read This

S Slow synchro First”

t step 5 in “Read This Still image S AF...46 First” t step 6 in “Read This Saturation...37 Smart zoom... 46 First” Scene Snow mode Viewing menu...38 t step 5 in “Read This t step 5 in “Read This Volume First” First” t step 6 in “Read This Screen Soft snap mode First” Changing the display...21 t step 5 in “Read This First” W Indicator ...17 Software ... 65 Warning indicators and LCD Backlight ...53 Specifications... 96 messages ...88 Self-diagnosis display...88 Spot metering... 33 WB ...34 Self-timer t step 5 in “Read This Spot metering cross hairs ... 33 White balance ...34 First” Standard ... 34 Windows computer...56 Sepia ...36 Recommended environment...57 Setting the clockTtstep 2 in “Read This Trimming ... 44 Wrist strap First” t in “Read This First” Tripod receptacle ... 15 Setup...37, 44, 45 Write-protect switch ...91 Troubleshooting ... 77 Camera 1 ...46 TV ... 75 Camera 2 ...49 Z Twilight mode Internal Memory Tool ...50 Zoomt step 5 in “Read This t step 5 in “Read This Memory Stick Tool ...51 First” First” Setup 1...53 Twilight portrait mode t step 5 in “Read This Setup 2...54 First” Setup 1 ...53 Setup 2 ...54 U Sharpness...37 Underexposure ... 11 Shooting USB Connect ... 54 Movie USB Driver ... 58 t step 5 in “Read This First” Using your camera abroad t step 1 in “Read This First”,

Trademarks

• and Cyber-shot Station are trademarks of Sony Corporation. • “Memory Stick”, , “Memory Stick PRO”, , “Memory Stick Duo”, , “Memory Stick PRO Duo”, , “MagicGate”, and are trademarks of Sony Corporation. • Picture Package is a trademark of Sony Corporation. • Microsoft, Windows, Windows Media, and DirectX are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. • Macintosh, Mac OS, QuickTime, iMac, iBook, PowerBook, Power Mac, and eMac are trademarks or registered trademarks of Apple Computer, Inc. • Macromedia and Flash are trademarks or registered trademarks of Macromedia, Inc. in the United States and/or other countries. • Intel, MMX, and Pentium are trademarks or registered trademarks of Intel Corporation. • In addition, system and product names used in this manual are, in general, trademarks or registered trademarks of their respective developers or manufacturers. However, the ™ or ® marks are not used in all cases in this manual.,

Reverse 987686942.pdf Revision History

Ver. Date History Contents S.M. Rev. issued 1.0 2005.03 Official Release — — 1.1 2005.07 Correction-1 • Correction of repair parts Yes (C1) S. M. correction: Page 6 DSC-S60/S80/S90/ST80]
15

Similar documents

SPECIFICATIONS Camera [Power, general] Cyber-shot Station CSS-SA
DSC-S60/S80/S90/ST80 SERVICE MANUAL LEVEL 2 DSC-S60/S90 Ver 1.0 2005.03 US Model Canadian Model Revision History Chinese Model Tourist Model DSC-S60/S80/S90/ How to use Acrobat Reader ST80 AEP Model UK Model E Model Hong Kong Model DSC-S60/S80/S90 Australian Model Korea Model DSC-S90 Photo: DSC-S90/
SPECIFICATIONS Camera [Power, general] Cyber-shot Station CSS-SA
DSC-S60/S80/S90/ST80 SERVICE MANUAL LEVEL 2 DSC-S60/S90 Ver 1.1 2005.07 US Model Canadian Model Revision History Chinese Model Tourist Model DSC-S60/S80/S90/ How to use Acrobat Reader ST80 AEP Model UK Model E Model Hong Kong Model DSC-S60/S80/S90 Australian Model Korea Model DSC-S90 Photo: DSC-S90/
Supplied accessories
DSC-S70 SERVICE MANUAL US Model Canadian Model Level 2 Ver. 1.2 2001.07 AEP Model UK Model E model Hong Kong Model Australian Model Chinese Model Korea Model Tourist Model Japanese Model This service manual contains information for Japanese model as well. On the SY-58 board SY-58 board This service
SAFETY-RELATED COMPONENT WARNING!!
DSC-S75 SERVICE MANUAL AEP Model UK Model Level 1 Ver 1.2 2001. 11 SPECIFICATIONS System Flash General AC-L10A/B/C Accessories Image device Recommended recording Used battery pack AC power adaptor A/V connecting cable (1) 8.93 mm (1/1.8 type) color distance (ISO is set to AUTO): NP-FM50 Power requir
Supplied accessories
DSC-S70 SERVICE MANUAL US Model Canadian Model Level 2 Ver. 1.3 2002.09 AEP Model UK Model E model Hong Kong Model Australian Model Chinese Model Korea Model Tourist Model Japanese Model This service manual contains information for Japanese model as well. On the SY-58 board SY-58 board This service
SPECIFICATIONS System Output connector General AC-L10A/B/C NP-FM50 battery pack
DSC-S85 SERVICE MANUAL US Model Canadian Model Level 2 AEP Model UK Model E Model Ver 1.1 2001. 08 Hong Kong Model Australian Model Chinese Model Korea Model Tourist Model Japanese Model Differences Manual This Service Manual covers only differences from DSC-S75 (Level 2). In performing repair, refe
SPECIFICATIONS System Output connector General AC-L10A/B/C NP-FM50 battery pack
DSC-S85 SERVICE MANUAL US Model Canadian Model Level 2 AEP Model UK Model E Model Ver 1.1 2001. 08 Hong Kong Model Australian Model Chinese Model Korea Model Tourist Model Japanese Model Differences Manual This Service Manual covers only differences from DSC-S75 (Level 2). In performing repair, refe
SAFETY-RELATED COMPONENT WARNING!! ATTENTION AU COMPOSANT AYANT RAPPORT
DSC-S75 SERVICE MANUAL US Model Canadian Model Level 2 AEP Model UK Model E Model Ver 1.2 2001. 08 Hong Kong Model Australian Model Chinese Model Korea Model Tourist Model Japanese Model This service manual contains information for Japanese model as well. On the SY-68 board SY-68 board This service
DSC-T1 SERVICE MANUAL LEVEL 2 US Model Canadian Model UK Model Hong Kong Model Australian Model Korea Model Chinese Model Tourist Model Japanese Model
DSC-T1 SERVICE MANUAL LEVEL 2 US Model Ver 1.0 2003. 10 Canadian Model Revision History AEP Model UK Model How to use E Model Acrobat Reader Hong Kong Model Australian Model Korea Model Chinese Model Tourist Model Japanese Model Link SPECIFICATIONS BLOCK DIAGRAMS PRINTED WIRING BOARDS SERVICE NOTE F
DSC-T1 SERVICE MANUAL LEVEL 2 US Model Canadian Model UK Model Hong Kong Model Australian Model Korea Model Chinese Model Tourist Model Japanese Model
DSC-T1 SERVICE MANUAL LEVEL 2 US Model Ver 1.1 2004. 03 Canadian Model Revision History AEP Model UK Model How to use E Model Acrobat Reader Hong Kong Model Australian Model Korea Model Chinese Model Tourist Model Japanese Model Link SPECIFICATIONS BLOCK DIAGRAMS PRINTED WIRING BOARDS SERVICE NOTE F
DSC-T1 SERVICE MANUAL LEVEL 1 US Model Ver 1.2 2004. 03 Canadian Model UK Model E Model Hong Kong Model Australian Model Korea Model Chinese Model Tourist Model
DSC-T1 SERVICE MANUAL LEVEL 1 US Model Ver 1.2 2004. 03 Canadian Model Revision History AEP Model UK Model E Model Hong Kong Model Australian Model Korea Model Chinese Model Tourist Model Japanese Model Link SPECIFICATIONS SELF DIAGNOSIS FUNCTION • INSTRUCTION MANUAL is shown at the end of this docu
• Change of Automatic Adjustment Program • Change of Message for Destination Data
DSC-T100 Auto-ADJ SERVICE MANUAL Ver. 1.1 2007.04 SUPPLEMENT-1 File this supplement with the service manual. (DI07-003) • Change of Automatic Adjustment Program • Change of Message for Destination Data Write • Addition of [Read], [Save], and [Load] buttons to Angular Velocity Sensitivity Adjustment
CAUTION Danger of explosion if battery is incorrectly replaced.
DSC-T10 SERVICE MANUAL LEVEL 3 US Model Ver 1.1 2006.09 Canadian Model Revision History AEP Model UK Model How to use E Model Acrobat Reader Australian Model Hong Kong Model Chinese Model Internal memory Korea Model ON BOARD Argentine Model Brazilian Model Japanese Model Photo: Silver Tourist Model
SPECIFICATIONS Camera [Input and Output connectors] BC-CS3 battery charger
DSC-T10 SERVICE MANUAL LEVEL 2 US Model Ver 1.0 2006.07 Canadian Model Revision History AEP Model UK Model How to use E Model Acrobat Reader Australian Model Hong Kong Model Chinese Model Internal memory ON BOARD Korea Model Argentine Model Japanese Model Tourist Model Photo: Silver Link SPECIFICATI
SPECIFICATIONS Camera [Input and Output connectors] BC-CSG/BC-CSGB/BC-CSGC
DSC-T100 SERVICE MANUAL LEVEL 2 US Model Ver. 1.0 2007.02 Canadian Model Revision History AEP Model UK Model How to use E Model Acrobat Reader Australian Model Hong Kong Model Chinese Model Internal memory Korea Model ON BOARD Brazilian Model Japanese Model Tourist Model Photo: Silver Link SPECIFICA
WARNING To prevent fire or shock hazard, do
DSC-T11 SERVICE MANUAL LEVEL 1 Differences Manual DSC-T11 AEP Model UK Model E Model Ver 1.1 2004. 09 Hong Kong Model Australian Model Revision History Korea Model Chinese Model Tourist Model Japanese Model • This Service Manual shows only the difference from DSC-T1. Refer to the Service Manual Leve
WARNING To prevent fire or shock hazard, do
DSC-T11 SERVICE MANUAL LEVEL 1 Differences Manual DSC-T11 AEP Model UK Model E Model Ver 1.0 2004. 04 Hong Kong Model Australian Model Revision History Korea Model Chinese Model Tourist Model Japanese Model • This Service Manual shows only the difference from DSC-T1. Refer to the Service Manual Leve
SPECIFICATIONS Camera [Input and Output connectors] BC-CSG/BC-CSGB/BC-CSGC
DSC-T20/T25 SERVICE MANUAL LEVEL 2 US Model Ver 1.0 2007.03 Canadian Model Revision History AEP Model UK Model How to use E Model Acrobat Reader Australian Model Hong Kong Model Chinese Model Internal memory Korea Model ON BOARD Argentine Model Brazillian Model Japanese Model Photo: Silver Tourist M
Model information table
DSC-T20/T25 SERVICE MANUAL LEVEL 3 US Model Ver 1.0 2007.03 Canadian Model Revision History AEP Model UK Model How to use E Model Acrobat Reader Australian Model Hong Kong Model Chinese Model Internal memory Korea Model ON BOARD Argentine Model Brazillian Model Japanese Model Photo: Silver Tourist M
DSC-T3 SERVICE MANUAL LEVEL 2 DSC-T3
DSC-T3 SERVICE MANUAL LEVEL 2 DSC-T3 Ver 1.0 2004. 09 US Model AEP Model Revision History UK Model E Model Hong Kong Model Australian Model How to use Chinese Model Acrobat Reader Japanese Model Korea Model Tourist Model Link SPECIFICATIONS BLOCK DIAGRAMS PRINTED WIRING BOARDS SERVICE NOTE FRAME SCH
DSC-T3 SERVICE MANUAL LEVEL 1 DSC-T3 Ver 1.0 2004. 09 US Model Revision History UK Model Link SPECIFICATIONS ACCESSORIES SELF DIAGNOSIS FUNCTION
DSC-T3 SERVICE MANUAL LEVEL 1 DSC-T3 Ver 1.0 2004. 09 US Model AEP Model Revision History UK Model E Model Hong Kong Model Australian Model Chinese Model Japanese Model Korea Model Tourist Model Link SPECIFICATIONS ACCESSORIES SELF DIAGNOSIS FUNCTION • INSTRUCTION MANUAL is shown at the end of this
DSC-T3 SERVICE MANUAL LEVEL 2 DSC-T3
DSC-T3 SERVICE MANUAL LEVEL 2 DSC-T3 Ver 1.2 2005. 09 US Model AEP Model Revision History UK Model E Model Hong Kong Model Australian Model How to use Chinese Model Acrobat Reader Japanese Model Korea Model Tourist Model Link SPECIFICATIONS BLOCK DIAGRAMS PRINTED WIRING BOARDS SERVICE NOTE FRAME SCH
DSC-T3 SERVICE MANUAL LEVEL 2 DSC-T3
DSC-T3 SERVICE MANUAL LEVEL 2 DSC-T3 Ver 1.1 2005. 04 US Model AEP Model Revision History UK Model E Model Hong Kong Model Australian Model How to use Chinese Model Acrobat Reader Japanese Model Korea Model Tourist Model Link SPECIFICATIONS BLOCK DIAGRAMS PRINTED WIRING BOARDS SERVICE NOTE FRAME SCH
DSC-T3 SERVICE MANUAL LEVEL 1 DSC-T3 Ver 1.2 2005. 09 US Model Revision History AEP Model Link
DSC-T3 SERVICE MANUAL LEVEL 1 DSC-T3 Ver 1.2 2005. 09 US Model Canadian Model Revision History AEP Model UK Model E Model Hong Kong Model Australian Model Chinese Model Japanese Model Korea Model Tourist Model Link SPECIFICATIONS ACCESSORIES SELF DIAGNOSIS FUNCTION • INSTRUCTION MANUAL is shown at t
DSC-T3 SERVICE MANUAL LEVEL 1 DSC-T3 Ver 1.1 2005. 04 US Model Revision History UK Model Link SPECIFICATIONS ACCESSORIES SELF DIAGNOSIS FUNCTION
DSC-T3 SERVICE MANUAL LEVEL 1 DSC-T3 Ver 1.1 2005. 04 US Model AEP Model Revision History UK Model E Model Hong Kong Model Australian Model Chinese Model Japanese Model Korea Model Tourist Model Link SPECIFICATIONS ACCESSORIES SELF DIAGNOSIS FUNCTION • INSTRUCTION MANUAL is shown at the end of this
SPECIFICATIONS Camera [LCD screen] BC-CS3 battery charger
DSC-T30 SERVICE MANUAL LEVEL 2 US Model Ver 1.0 2006.03 Canadian Model Revision History AEP Model UK Model How to use E Model Acrobat Reader Australian Model Hong Kong Model Chinese Model Internal memory ON BOARD Korea Model Brazilian Model Japanese Model Tourist Model Photo: Silver Link SPECIFICATI
DSC-T5 SERVICE MANUAL LEVEL 1 US Model UK Model E Model Australian Model Hong Kong Model Chinese Model Korea Model Brazilian Model Japanese Model Tourist Model
DSC-T5 SERVICE MANUAL LEVEL 1 US Model Ver 1.2 2005.10 Canadian Model Revision History AEP Model UK Model E Model Australian Model Hong Kong Model Chinese Model Korea Model Brazilian Model Japanese Model Photo: Silver Tourist Model Link SPECIFICATIONS ACCESSORIES INSTRUCTION MANUAL SERVICE NOTE The
DSC-T5 SERVICE MANUAL LEVEL 2
DSC-T5 SERVICE MANUAL LEVEL 2 US Model Ver 1.2 2005.10 Canadian Model Revision History AEP Model UK Model How to use E Model Acrobat Reader Australian Model Hong Kong Model Internal memory Chinese Model ON BOARD Korea Model Brazilian Model Photo: Silver Japanese Model Tourist Model Link SPECIFICATIO
SPECIFICATIONS Camera [Input and Output connectors] BC-CS3 battery charger
DSC-T50 SERVICE MANUAL LEVEL 2 US Model Ver 1.0 2006.09 Canadian Model Revision History AEP Model UK Model E Model How to use Australian Model Acrobat Reader Hong Kong Model Chinese Model Korea Model Internal memory Argentine Model ON BOARD Brazilian Model Japanese Model Tourist Model Photo: Silver
DSC-T7 SERVICE MANUAL LEVEL 2 DSC-T7
DSC-T7 SERVICE MANUAL LEVEL 2 DSC-T7 Ver 1.1 2005. 06 US Model Canadian Model Revision History AEP Model UK Model E Model Hong Kong Model How to use Australian Model Acrobat Reader Chinese Model Japanese Model Brazilian Model Argentina Model Korea Model Tourist Model Link SPECIFICATIONS BLOCK DIAGRA