Download: DSC-T1 SERVICE MANUAL LEVEL 1 US Model Ver 1.2 2004. 03 Canadian Model UK Model E Model Hong Kong Model Australian Model Korea Model Chinese Model Tourist Model

DSC-T1 SERVICE MANUAL LEVEL 1 US Model Ver 1.2 2004. 03 Canadian Model Revision History AEP Model UK Model E Model Hong Kong Model Australian Model Korea Model Chinese Model Tourist Model Japanese Model Link SPECIFICATIONS SELF DIAGNOSIS FUNCTION • INSTRUCTION MANUAL is shown at the end of this document. DIGITAL STILL CAMERA DSC-T1 SPECIFICATIONS xCamera [General] xAC-LM5 AC Adaptor [System] Used battery pack Power requirements Image device NP-FT1 100 to 240 V AC, 50/60 Hz 7.66 mm (1/2.4 type) color CCD Power requirements Current consumption Primary color filter 3.6 V 0.2 A Total pixels number...
Author: 阿由葉 Shared: 8/19/19
Downloads: 36 Views: 2116

Content

DSC-T1 SERVICE MANUAL LEVEL 1

US Model Ver 1.2 2004. 03 Canadian Model Revision History AEP Model UK Model E Model Hong Kong Model Australian Model Korea Model Chinese Model Tourist Model Japanese Model Link SPECIFICATIONS SELF DIAGNOSIS FUNCTION • INSTRUCTION MANUAL is shown at the end of this document.

DIGITAL STILL CAMERA

,

DSC-T1 SPECIFICATIONS

xCamera [General] xAC-LM5 AC Adaptor [System] Used battery pack Power requirements Image device NP-FT1 100 to 240 V AC, 50/60 Hz 7.66 mm (1/2.4 type) color CCD Power requirements Current consumption Primary color filter 3.6 V 0.2 A Total pixels number of camera Power consumption (during shooting) Power consumption Approx. 5 255 000 pixels 1.6 W 10 W Effective pixels number of camera Operating temperature Rated output voltage Approx. 5 090 000 pixels 0°C to +40°C (+32°F to +104°F) 4.2 V DC, 1.5 A Lens Carl Zeiss Vario-Tessar Storage temperature Operating temperature 3× zoom lens –20°C to +60°C (–4°F to +140°F) 0°C to +40°C (+32°F to +104°F) f = 6.7 – 20.1 mm (38 – 114 mm when Dimensions Storage temperature converted to a 35 mm still camera) 91 × 60 × 21 mm –20°C to +60°C (–4°F to +140°F) F3.5 – 4.4 (3 5/8 × 2 3/8 × 2 7/32 inches) Dimensions Exposure control (W/H/D, excluding maximum Approx. 47 × 30 × 80m m Automatic exposure, Scene selection protrusions) (1 7/8 × 1 3/16 × 31/4 inches) (8 modes) Mass Approx. 180 g (6.3 oz) (including (W/H/D, excluding projecting parts) White balance battery pack NP-FT1, “Memory Stick Mass Approx. 170 g (6.0 oz) excluding Automatic, Daylight, Cloudy, Duo” and wrist strap) power cord (mains lead) Fluorescent, Incandescent, Flash Built-in microphone File format (DCF compliant) Electret condenser microphone xNP-FT1 battery pack Still images: Exif Ver. 2.2 JPEG Built-in speaker compliant, DPOF compatible Used battery Piezo-electric speaker Audio with still image: MPEG1 Lithium-ion battery compliant (Monaural) Exif Print Compatible Maximum voltage Movies: MPEG1 compliant PRINT Image Matching II Compatible DC 4.2 V (Monaural) Nominal voltage Recording media DC 3.6 V “Memory Stick Duo” xUC-TA USB cradle Capacity 2.4 Wh (680 mAh) Flash Recommended distance (ISO set to [Input and Output connectors] Auto): A/V OUT (MONO) jack (Monaural) 0.3 m to 1.5 m (11 7/8 inches to Minijack xAccessories 59 1/8 inches) (W) Video: 1 Vp-p, 75 Ω, unbalanced, 0.5 m to 1.5 m (19 3/4 inches to • AC-LM5 AC Adaptor (1) sync negative 59 1/8 inches) (T) Audio: 327 mV (at a 47 kΩ load) • Power cord (mains lead) (1) Output impedance 1 kΩ • UC-TA USB cradle (1) [Input and Output connectors] USB jack B • USB cable (1) Multi connector USB connection • NP-FT1 battery pack (1) High-Speed USB • A/V connecting cable (1) [LCD screen] (USB 2.0 High-Speed compatible) • Wrist strap (1) LCD panel DC IN jack • “Memory Stick Duo” (32 MB) (1) 6.2 cm (2.5 type) TFT drive Camera connector • Memory Stick Duo Adaptor (1) Total number of dots 211200 (960×220) dots • CD-ROM (USB driver SPVD-013) (1) • Operating instructions (1) Design and specifications are subject to change without notice.

CAUTION : Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. SAFETY-RELATED COMPONENT WARNING!! ATTENTION AU COMPOSANT AYANT RAPPORT À LA SÉCURITÉ! COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE WITH LES COMPOSANTS IDENTIFÉS PAR UNE MARQUE 0 SUR LES MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU PUBLISHED BY SONY. DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.

— 2 —,

DSC-T1

Checking supplied accessories. Make sure that the following accessories are supplied with your camcorder. Power cord (Main lead) (1) AC-LM5 AC Adaptor (1) UC-TA USB cradle (1) USB cable (1) (AUS model) (Except US, CND) 1-817-742-11 1-828-073-11 0 1-696-819-11 0 1-477-488-12 Power cord (Main lead) (1) AC-LM5 AC Adaptor (1) (AEP, E model) (US, CND) 0 1-769-608-11 0 1-477-488-21 Power cord (Main lead) (1) (CH model) 0 1-782-476-13 Power cord (Main lead) (1) A/V connecting cable (1) Wrist strap (1) (UK, HK model) 1-824-111-11 3-086-283-01 0 1-783-374-11 Power cord (Main lead) (1) CD-ROM (JE model) (USB Driver SPVD-013) (1) 0 1-790-732-12 (AEP, UK, E, HK, AUS, CH, Power cord (Main lead) (1) JE, KR model) (J model) 3-087-330-01 0 1-791-637-13 CD-ROM Power cord (Main lead) (1) (USB Driver SPVD-013 (I)) (1) 2-pin conversion adaptor (1) 2-pin conversion adaptor (1) (KR model) (US, CND, J model) (JE model) (E model) 0 1-776-985-11 3-087-331-01 1-569-007-12 1-569-008-12 Power cord (Main lead) (1) (US, CND model) 0 1-790-107-22 • Abbreviation CND : Canadian model AUS : Australian model CH : Chinese model HK : Hong Kong model NP-FT1 battery pack (1) “Memory stick Duo” (1) Memory stick Duo Adaptor(1) KR : Korea model (not supplied) (MSA-M32A) (MSAC-M2) JE : Tourist model (not supplied) (not supplied) J : Japanese model

Other accessories

3-085-733-01 MANUAL, INSTRUCTION SET (JAPANESE) (J) 3-085-733-71 MANUAL, INSTRUCTION SET (ARABIC) (E) 3-085-733-11 MANUAL, INSTRUCTION SET (ENGLISH) (EXCEPT KR, J) 3-085-733-81 MANUAL, INSTRUCTION SET (KOREAN) (JE, KR) 3-085-733-21 MANUAL, INSTRUCTION SET (FRENCH/GERMAN) 3-085-734-01 MANUAL, INSTRUCTION (for PC)(JAPANESE) (J) (CND, AEP) 3-085-733-31 MANUAL, INSTRUCTION SET (SPANISH/PORTUGUESE) Note : Note : (AEP, E, JE) The components identified by Les composants identifiés par 3-085-733-41 MANUAL, INSTRUCTION SET (ITALIAN/DUTCH) (AEP) mark 0 or dotted line with mark une marque 0 sont critiques 0 are critical for safety. pour la sécurité. 3-085-733-51 MANUAL, INSTRUCTION SET (CHINESE) (E, HK, CH, JE) Replace only with part number Ne les remplacer que par une specified. pièce portant le numéro spécifié. 3-085-733-61 MANUAL, INSTRUCTION SET (RUSSIAN/SWEDISH) (AEP)

SAFETY CHECK-OUT

After correcting the original service problem, perform the following safety checks before releasing the set to the customer. 1. Check the area of your repair for unsoldered or poorly-soldered of deterioration. Point them out to the customer and connections. Check the entire board surface for solder splashes recommend their replacement. and bridges. 5. Check the B+ voltage to see it is at the values specified. 2. Check the interboard wiring to ensure that no wires are 6. Flexible Circuit Board Repairing "pinched" or contact high-wattage resistors. • Keep the temperature of the soldering iron around 270˚C 3. Look for unauthorized replacement parts, particularly during repairing. transistors, that were installed during a previous repair. Point • Do not touch the soldering iron on the same conductor of the them out to the customer and recommend their replacement. circuit board (within 3 times). 4. Look for parts which, through functioning, show obvious signs • Be careful not to apply force on the conductor when soldering or unsoldering. — 3 —,

DSC-T1 SELF-DIAGNOSIS FUNCTION

• NOTE FOR REPAIR Make sure that the flat cable and flexible board are not cracked of When remove a connector, don't pull at wire of connector. bent at the terminal. Be in danger of the snapping of a wire. Do not insert the cable insufficiently nor crookedly. When installing a connector, don't press down at wire of connector. Be in danger of the snapping of a wire. Cut and remove the part of gilt which comes off at the point. (Take care that there are some pieces of gilt left inside) [Discharging of the FLASH unit’s charging capacitor] The charging capacitor of the FLASH unit is charged up to the maximum 300 V potential. There is a danger of electric shock by this high voltage when the capacitor is handled by hand. The electric shock is caused by the charged voltage which is kept without discharging when the main power of the DSC-T1 is simply turned off. Therefore, the remaining voltage must be discharged as described below. Preparing the Short Jig 1 kΩ/1 W To preparing the short jig. a small clip is attached to each end of a resistor of 1 kΩ /1 W (1-215-869-11) Wrap insulating tape fully around the leads of the resistor to prevent electrical shock. Wrap insulating tape. Discharging the Capacitor Short circuits between the positive and the negative terminals of charged capacitor with the short jig about 10 seconds. ST-86 B0ARD Shorting jig (1kΩ / 1w) Capacitor — 4 —,

DSC-T1

[Description on Self-diagnosis Display] Self-diagnosis display • C: ss: ss The contents which can be handled by customer, are displayed. • E: ss: ss The contents which can be handled by engineer, are displayed. Display Code Countermeasure Cause Caution Display During Error C : 3 2 : 0 1 Turn off the main power then back on. Trouble with hardware. SYSTEM ERROR • The type of memory stick that cannot be Replace the memory stick. used by this machine, is inserted. C : 1 3 : 0 1 MS ERROR Format the memory stick with the DSC-T1. • Data is damaged. • Unformatted memory stick is inserted. Flash LED Checking of flash unit or replacement of Abnormality when flash is being E : 9 1 : 0 1 Flash display flash unit. charged. Flashing at 3.2 Hz E:61:00 *1 Checking of lens drive circuit When failed in the focus initialization. — E61:10 *1 Note : The error code is cleared if the battery is removed, except defective flash unit. *1: The error display is given in two ways. — 5 —,

DSC-T1 Sony EMCS Co. 2004C1600-19-876-280-41 ©2004.3

— 6 — Published by DI CS Strategy Div., filename[C:\Documents and Settings\gotanda\Desktop\3085733111DSCT1U2\010cov.fm] masterpage:Right 01cov.book Page 1 Monday, September 29, 2003 11:15 AM 3-085-733-11(1) Getting started_

Digital Still Camera Shooting still images_

Viewing still images _

Operating Instructions

Before operating the unit, please read this manual thoroughly, and Deleting still images _ retain it for future reference.

Owner’s Record Before advanced operations _

The model and serial numbers are located on the bottom. Record the serial number in the space provided below. Refer to these numbers Advanced still image shooting _ whenever you call upon your Sony dealer regarding this product. Model No. DSC-T1 Advanced still image viewing _ Serial No. Still image editing _ Enjoying movies _ Enjoying images on your computer_ Troubleshooting _ Additional information_

DSC-T1

Index _ © 2003 Sony Corporation, filename[C:\Documents and Settings\gotanda\Desktop\3085733111DSCT1U2\02war.fm] masterpage:Left3 01cov.book Page 2 Monday, September 29, 2003 11:15 AM

WARNING If you have any questions about this product, Note: you may call: This equipment has been tested and found to

To prevent fire or shock hazard, do Sony Customer Information Center comply with the limits for a Class B digital not expose the unit to rain or 1-800-222-SONY (7669) device, pursuant to Part 15 of the FCC Rules. moisture. The number below is for the FCC related matters These limits are designed to provide reasonable only. protection against harmful interference in a residential installation. This equipment generates,

For the Customers in the U.S.A. Regulatory Information uses, and can radiate radio frequency energy and,

if not installed and used in accordance with the

Declaration of Conformity instructions, may cause harmful interference to

radio communications. However, there is no Trade Name: SONY guarantee that interference will not occur in a Model No.: DSC-T1 Responsible Party: Sony Electronics Inc. particular installation. If this equipment does Address: 680 Kinderkamack Road, cause harmful interference to radio or television Oradell, NJ 07649 U.S.A. reception, which can be determined by turning Telephone No.: 201-930-6972 the equipment off and on, the user is encouraged to try to correct the interference by one or more of This device complies with Part 15 of the the following measures: FCC Rules. Operation is subject to the — Reorient or relocate the receiving antenna. following two conditions: (1) This device — Increase the separation between the may not cause harmful interference, and This symbol is intended to alert (2) this device must accept any interference equipment and receiver. received, including interference that may — Connect the equipment into an outlet on a the user to the presence of circuit different from that to which the uninsulated “dangerous cause undesired operation. receiver is connected. voltage” within the product’s — Consult the dealer or an experienced radio/ enclosure that may be of Note: TV technician for help. sufficient magnitude to Model DSC-T1 is to be used with USB cradle constitute a risk of electric Model UC-TA and AC Adaptor Model AC- The shielded interface cable must be used with shock to persons. LM5. the equipment in order to comply with the limits This symbol is intended to alert CAUTION for a digital device pursuant to Subpart B of Part the user to the presence of You are cautioned that any changes or 15 of FCC Rules. important operating and modifications not expressly approved in this maintenance (servicing) manual could void your authority to operate this instructions in the literature equipment. accompanying the appliance., filename[C:\Documents and Settings\gotanda\Desktop\3085733111DSCT1U2\02war.fm] masterpage:Right3 01cov.book Page 3 Monday, September 29, 2003 11:15 AM

For the Customers in the U.S.A. Notice for the customers in the “Memory Stick”

and Canada United Kingdom RECYCLING LITHIUM-ION A moulded plug complying with BS 1363 is fitted BATTERIES to this equipment for your safety and Lithium-Ion batteries are convenience. N50 recyclable. Should the fuse in the plug supplied need to be You can help preserve our replaced, a fuse of the same rating as the supplied environment by returning your one and approved by ASTA or BSI to BS 1362, For the Customers in the U.S.A. used rechargeable batteries to (i.e., marked with or mark) must be used. THIS DEVICE COMPLIES WITH PART 15 the collection and recycling location nearest OF THE FCC RULES. OPERATION IS you. If the plug supplied with this equipment has a SUBJECT TO THE FOLLOWING TWO detachable fuse cover, be sure to attach the CONDITIONS: For more information regarding recycling of fuse cover after you change the fuse. Never (1) THIS DEVICE MAY NOT CAUSE rechargeable batteries, call toll free use the plug without the fuse cover. If you HARMFUL INTERFERENCE, AND 1-800-822-8837, or visit should lose the fuse cover, please contact your (2) THIS DEVICE MUST ACCEPT ANY http://www.rbrc.org/ nearest Sony service station. INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY Caution:Do not handle damaged or leaking CAUSE UNDESIRED OPERATION. Lithium-Ion batteries. Attention for the Customers in

Europe For the Customers in Canada

CAUTION THIS CLASS B DIGITAL APPARATUS TO PREVENT ELECTRIC SHOCK, MATCH This product has been tested and found compliant COMPLIES WITH CANADIAN ICES-003. WIDE BLADE OF PLUG TO WIDE SLOT, with the limits sets out in the EMC Directive for FULLY INSERT. using connection cables shorter than 3 meters (9.8 feet). Notice Never expose the battery pack to temperature Certain countries and regions may regulate above 60°C (140°F), such as in a car parked in the Attention The electromagnetic field at the specific disposal of the battery used to power this product. sun or under direct sunlight. frequencies may influence the picture and sound Please consult with your local authority. of this camera. Notice If static electricity or electromagnetism causes data transfer to discontinue midway (fail), restart the application or disconnect and connect the USB cable again., filename[C:\Documents and Settings\gotanda\Desktop\3085733111DSCT1U2\02war.fm] masterpage:Left 01cov.book Page 4 Monday, September 29, 2003 11:15 AM

Before using your camera

Trial recording Do not shake or strike the camera Before you record one-time events, you may want In addition to malfunctions and inability to record Carl Zeiss lens to make a trial recording to make sure that the images, this may render the “Memory Stick Duo” This camera is equipped with a Carl Zeiss lens camera is working correctly. unusable or image data breakdown, damage or which is capable of reproducing sharp images loss may occur. with excellent contrast. No compensation for contents of the The lens for this camera has been produced under a quality assurance system certified by recording LCD screen, LCD finder (only models Carl Zeiss in accordance with the quality Contents of the recording cannot be compensated with an LCD finder) and lens standards of Carl Zeiss in Germany. for if recording or playback is not possible due to • The LCD screen and the LCD finder are a malfunction of your camera or recording media, manufactured using extremely high-precision etc. technology so over 99.99% of the pixels are Clean the flash surface before use operational for effective use. However, there The heat of flash emission may cause dirt on the Back up recommendation may be some tiny black points and/or bright flash surface to become discolored or to stick to To avoid the potential risk of data loss, always points (white, red, blue or green in color) that the flash surface, resulting in insufficient light constantly appear on the LCD screen and the emission.copy (back up) data to a disk. LCD finder. These points are normal in the manufacturing process and do not affect the Do not get the camera wet Notes on image data compatibility recording in any way. When taking pictures outdoors in the rain or • This camera conforms with the Design rule for • Be careful when placing the camera near a under similar conditions, be careful not to get the Camera File system universal standard window or outdoors. Exposing the LCD screen, camera wet. If moisture condensation occurs, see established by the JEITA (Japan Electronics the finder or the lens to direct sunlight for long page 108 and follow the instructions on how to and Information Technology Industries periods may cause malfunctions. remove it before using the camera. Association). • Do not press the LCD screen hardly. The screen • Playback of images recorded with your camera may be uneven and that may cause a on other equipment and playback of images Do not expose the camera to sand or malfunction. recorded or edited with other equipment on dust• Do not press the lens portion hard, or it may your camera are not guaranteed. cause the malfunction of the lens. Using the camera in sandy or dusty locations may • Images may be trailed on the LCD screen in a cause malfunction. Precaution on copyright cold location. This is not a malfunction. Television programs, films, video tapes, and other Do not aim the camera at the sun or materials may be copyrighted. Unauthorized other bright light recording of such materials may be contrary to This may cause irrecoverable damage to your the provision of the copyright laws. eyes. Or it may cause the malfunction of your camera., filename[C:\Documents and Settings\gotanda\Desktop\3085733111DSCT1U2\02war.fm] masterpage:Right 01cov.book Page 5 Monday, September 29, 2003 11:15 AM Note on the camera locations • Pentium is a trademark or a registered Do not use the camera near a location that trademark of Intel Corporation. generates strong radio wave or emits radiation. • In addition, system and product names used in The camera may not be able to record or play this manual are, in general, trademarks or back properly. registered trademarks of their respective developers or manufacturers. However, the ™ The pictures used in this manual or ® marks are not used in all cases in this manual. The photographs used as examples of pictures in this manual are reproduced images, and are not actual images shot using this camera. Trademarks • “Memory Stick Duo” and are trademarks of Sony Corporation. • “Memory Stick PRO Duo” and are trademarks of Sony Corporation. • “MagicGate Memory Stick Duo” is a trademark of Sony Corporation. • “Memory Stick,” and “MagicGate Memory Stick” are trademarks of Sony Corporation. • “Memory Stick PRO” and are trademarks of Sony Corporation. • “MagicGate” and are trademarks of Sony Corporation. • “InfoLITHIUM” is a trademark of Sony Corporation. • Microsoft and Windows are registered trademarks of the U.S. Microsoft Corporation in the United States and other countries. • Macintosh, Mac OS and QuickTime are trademarks or registered trademarks of Apple Computer, Inc., filename[C:\Documents and Settings\gotanda\Desktop\3085733111DSCT1U2\01covTOC.fm] masterpage:Left 01cov.book Page 6 Monday, September 29, 2003 11:15 AM

Table of contents

Before using your camera ... 4 Selecting a flash mode ... 29 Advanced still image Identifying the parts ... 8 Inserting the date and time on a still Camera... 8 image... 30 shooting USB cradle... 10 Shooting according to scene conditions Choosing an auto focus method ...47 Connecting and disconnecting your — Scene Selection ... 32 Choosing a focus range finder frame camera ... 10 — AF range finder...47

Viewing still images Choosing a focus operation Getting started Viewing images on the LCD screen of your — AF Mode...48

Charging the battery pack ... 11 camera ... 35 Setting the distance to the subject Using the AC Adaptor ... 15 Viewing images on a TV screen... 37 — Focus preset ...49 Using your camera abroad ... 15 Adjusting the exposure Turning on/off your camera ... 16 Deleting still images — EV adjustment ...50 How to use the control button... 16 Deleting images ... 39 Displaying a histogram ...51 Setting the date and time... 17 Formatting a “Memory Stick Duo” ... 41 Selecting the metering mode...52 Shooting three images with the exposure

Shooting still images Before advanced operations shifted — Exposure Bracket...52

Inserting and removing a “Memory Stick Adjusting color tonesHow to setup and operate your Duo” ... 19 — White Balance ...54camera ... 43 Setting the still image size ... 20 Adjusting the flash levelChanging the menu settings ... 43 Image size ... 21 — Flash Level ...55Changing the items on the Basic still image shooting Shooting images continuouslySetup screen ... 44 — Using auto adjustment mode ... 22 — Burst ...55Deciding the still image quality... 44 Checking the last image you shot Shooting in Multi Burst modeCreating or selecting a folder ... 45 — Quick Review... 24 — Multi Burst...56Creating a new folder ... 45 Indicators on the LCD screen during Shooting still images for e-mailChanging the recording folder ... 46 shooting ... 25 — E-Mail...57 Using the zoom feature... 25 Shooting still images with audio files Shooting close-ups — Voice...58 — Macro... 27 Adding special effects Using the self-timer ... 28 — Picture Effect ...58, filename[C:\Documents and Settings\gotanda\Desktop\3085733111DSCT1U2\01covTOC.fm] masterpage:L1-Right 01cov.book Page 7 Monday, September 29, 2003 11:15 AM

Advanced still image viewing Enjoying movies Additional information

Selecting the folder and playing back Shooting movies ... 70 Number of images that can be saved or images Viewing movies on the LCD screen... 71 shooting time...100 — Folder...60 Deleting movies ... 72 Menu items...102 Enlarging a portion of a still image...61 Editing movies ... 73 Setup items ...106 Enlarging an image Cutting movies... 74 Precautions ...108 — Playback zoom...61 Deleting unnecessary portions On “Memory Stick” ...109 Recording an enlarged image of movies ... 74 On “InfoLITHIUM” battery pack ...111 — Trimming ...62 Specifications ...112 Playing back successive images Enjoying images on your The LCD screen ...114 — Slide Show...62 computer Rotating still images IndexCopying images to your computer — Rotate...63 — For Windows users... 75 Index...118 Playing back images shot in Multi Burst Copying images to your computer mode ...64 — For Macintosh users ... 86 Playing back continuously ...64 Playing back frame by frame Troubleshooting — Jog playback ...65 Troubleshooting... 88

Still image editing Warnings and messages... 97

Self-diagnosis display... 99 Protecting images — Protect ...66 Changing image size — Resize...67 Choosing images to print — Print (DPOF) mark ...68, filename[C:\Documents and Settings\gotanda\Desktop\3085733111DSCT1U2\03bas.fm] masterpage:Left2:1 01cov.book Page 8 Monday, September 29, 2003 11:15 AM

Identifying the parts

See the pages in parentheses for details of operation. A POWER button (16) B POWER lamp (16)

Camera C Shutter button (22)

D Lens cover (16) E Multi connector (13, 15) 1 F Battery/“Memory Stick Duo” 2 cover9 G “Memory Stick Duo” insertion 3 slot (19) q; H Battery insertion slot (11) I Microphone J Flash (29) qa K Lens4LSelf-timer lamp (28)/ qs AF illuminator (30, 106) 6 8, filename[C:\Documents and Settings\gotanda\Desktop\3085733111DSCT1U2\03bas.fm] masterpage:Right2:1(blank) 01cov.book Page 9 Monday, September 29, 2003 11:15 AM A For shooting: Zoom (W/T) button (25) 1 8 For viewing: / (Playback zoom) button (61)/ (Index) button (36) 29B/CHG lamp (orange) (12, 29) C LCD screen D MENU button (43, 102) E (Display/LCD backlight on/ 3 Attaching the strap off) button (25) F Control button 4 Menu on: v/V/b/B/z (16) Menu off: / /7/ (29/28/24/27) 0 G RESET button (88) H Speaker6IMode switch (17, 102) qa : To shoot movies : To shoot still images : To view or edit images 7 qs J Hook for wrist strap K (Image Size/Delete) button (20, 39) L Access lamp (19), filename[C:\Documents and Settings\gotanda\Desktop\3085733111DSCT1U2\03bas.fm] masterpage:Left1:2 01cov.book Page 10 Monday, September 29, 2003 11:15 AM

USB cradle Connecting and disconnecting your camera

This is used when charging the battery pack How to connect How to disconnect or connecting the camera to a TV, etc. Connect the camera as illustrated. Grasp the camera and the USB cradle (supplied) as illustrated and disconnect the 1 camera. 2 • Make sure the camera is securely connected to the USB cradle. 3 • Be sure to turn off the camera before you connect the camera to the USB cradle or disconnect the camera from the USB cradle. • Do not disconnect the camera from the USB cradle during the USB connection, 4 as the data may be corrupted. To cancel the USB connection, see P on page 80 A Camera connector (Windows) or 1 on page 86 B (USB) jack (79) (Macintosh). C DC IN jack (11) D A/V OUT (MONO) jack (37), filename[C:\Documents and Settings\gotanda\Desktop\3085733111DSCT1U2\03bas.fm] masterpage:Right 01cov.book Page 11 Monday, September 29, 2003 11:15 AM

Getting started Charging the battery pack

AC Adaptor USB cradle 2 DC IN jack1 3 DC plug , Open the battery/“Memory , Install the battery pack, then , Connect the AC Adaptor

Stick Duo” cover. close the battery/“Memory (supplied) to the DC IN jack of Stick Duo” cover. the USB cradle (supplied).

Slide the cover in the direction of the arrow. Make sure the battery pack is firmly Connect the plug with the v mark facing • Be sure to turn off your camera when inserted all the way, then close the cover. up. charging the battery pack (page 16). • Your camera operates with the • Do not short the DC plug of the AC Adaptor “InfoLITHIUM” NP-FT1 battery pack (T type) Battery insertion slot with a metallic object, as this may cause (supplied). You can use only T type battery Insert the battery pack so pack (page 111). that the v marks on the malfunction. side of the battery pack face the same direction as the v mark on the battery insertion slot. • Be careful not to drop the battery pack when installing it. Getting started, filename[C:\Documents and Settings\gotanda\Desktop\3085733111DSCT1U2\03bas.fm] masterpage:Left 01cov.book Page 12 Monday, September 29, 2003 11:15 AM Disconnecting the AC Adaptor from 2 To a wall outlet the USB cradle (wall socket) Hold the DC plug itself and the USB cradle as illustrated and disconnect the cable. Power cord 4 (mains lead) 5 , Connect the power cord (mains , Connect the camera to the USB lead) to the AC Adaptor and to cradle. a wall outlet (wall socket). DC plug Connect the camera as illustrated. The /CHG lamp lights up when charging begins, and goes off when charging is completed. /CHG /CHG lamp • Make sure the camera is securely connected to the USB cradle., filename[C:\Documents and Settings\gotanda\Desktop\3085733111DSCT1U2\03bas.fm] masterpage:Right 01cov.book Page 13 Monday, September 29, 2003 11:15 AM To charge the battery pack only To remove the battery pack Battery remaining indicator using the AC Adaptor The battery remaining indicator on the You can charge the battery pack without the upper left side of the LCD screen shows the USB cradle, such as during your travels. remaining shooting/viewing time and the Connect the DC plug of the AC Adaptor to battery remaining charge. the camera with v mark facing as illustrated. Remaining indicator AC Adaptor Multi To a wall outlet connector 60min(wall socket) 3 Remaining time Open the battery/“Memory Stick Duo” • The displayed time remaining may not be cover, then hold the camera so that it faces correct under certain circumstances or downward and remove the battery pack. conditions.1 • Be careful not to drop the battery pack when Charging time DC plug Power cord removing it. (mains lead) Approximate time to charge a completely discharged battery pack using the AC Adaptor at a temperature of 25°C (77°F). • Be sure to turn off your camera when Battery pack Charging time charging the battery pack (page 16). (min.) • When placing the camera, make sure the LCD NP-FT1 (supplied) Approx. 150 screen is facing up. • After charging the battery pack, disconnect the AC Adaptor both from the multi connector of the camera and from a wall outlet (wall socket). Getting started, filename[C:\Documents and Settings\gotanda\Desktop\3085733111DSCT1U2\03bas.fm] masterpage:Left 01cov.book Page 14 Monday, September 29, 2003 11:15 AM

Number of images and battery Shooting still images Shooting movies3)

life that can be recorded/ Under the average conditions1) NP-FT1 (supplied) viewed NP-FT1 (supplied) LCD Battery life The tables show the approximate number of Image LCD backlight (min.) images and the battery life that can be size back- No. of Battery life Continuous On Approx. 80 light images (min.)recorded/viewed when you shoot images in shooting Off Approx. 100 normal mode with a fully charged battery On Approx. 170 Approx. 85 3)5M Shooting movies continuously with the image pack at a temperature of 25°C (77°F). The Off Approx. 200 Approx. 100 size [160] numbers of images that can be recorded or On Approx. 170 Approx. 85VGA viewed take into account changing the Off Approx. 200 Approx.100 • The number of images and the battery life that “Memory Stick Duo” as necessary. Note 1) can be recorded/viewed are decreased under the Shooting in the following situations: following conditions: that the actual numbers may be less than – (P.Quality) is set to [Fine] – The surrounding temperature is low indicated depending on the conditions of – Shooting one time every 30 seconds – The flash is used use. – The zoom is switched alternately between – The camera has been turned on and off many the W and T ends times – The flash strobes once every two times – The zoom is used frequently – The power turns on and off once every ten – [LCD Backlight] is set to [Bright] on the times Setup screen – [AF Mode] is set to [Single] on the Setup – The battery power is low. screen The battery capacity decreases as you use it more and more and as time passes

Viewing still images2) (page 111).

– [AF Mode] is set to [Monitor] or [Cont] on NP-FT1 (supplied) the Setup screen Image size No. of Battery life images (min.) 5M Approx. 2600 Approx. 130 VGA Approx. 2800 Approx. 140 2) Viewing single images in order at about three second intervals, filename[C:\Documents and Settings\gotanda\Desktop\3085733111DSCT1U2\03bas.fm] masterpage:Right2:1 01cov.book Page 15 Monday, September 29, 2003 11:15 AM

Using the AC Adaptor Using your camera

abroad AC Adaptor Power sourcesMulti connector 2 To wall outlet You can use your camera in any country or (wall socket) region with the AC Adaptor (supplied) within 100 V to 240 V AC, 50/60 Hz. Use a commercially available AC plug adaptor [a], if necessary, depending on the design of the wall outlet (wall socket) [b].1 Power cord AC-LM5 1 DC plug 2 (mains lead) , Connect the AC Adaptor , Connect the power cord (mains (supplied) to the multi lead) to the AC Adaptor and • Do not use an electronic transformer (travel connector of the camera. then to a wall outlet (wall converter), as this may cause a malfunction. socket). When placing the camera, make sure the LCD screen is facing up. Connect the plug with the mark facing • After using the AC Adaptor, disconnect it both v from the multi connector of the camera and up. from a wall outlet (wall socket). • The set is not disconnected from the AC power • Connect the AC Adaptor to an easily accessible source (mains) as long as it is connected to the wall outlet (wall socket) close by. If any trouble wall outlet (wall socket) even if the set itself has occurs while using the adaptor, immediately been turned off. shut off the power by disconnecting the plug from the wall outlet (wall socket). Getting started, filename[C:\Documents and Settings\gotanda\Desktop\3085733111DSCT1U2\03bas.fm] masterpage:Left2:1 01cov.book Page 16 Monday, September 29, 2003 11:15 AM

Turning on/off your camera How to use the

control button POWER lamp Auto power-off function If you do not operate the camera for about POWER button Program three minutes during shooting or viewing Auto Camera or when performing the Setup, the WB ISO camera turns off automatically to prevent wearing down the battery. The auto power-off function only operates when Fine FINE the camera is operating using a battery Standard P.Quality pack. The auto power-off function also Mode BRK M PFX will not operate in the following , Slide the lens cover in the circumstances. To change the current settings of the direction of arrow or press the • When viewing movies camera, bring up the menu or the Setup

POWER button. • When playing back a slide show screen (page 44), and use the control button

• When a connector is plugged into the to make the changes. The POWER lamp (green) lights up and the (USB) jack or the A/V OUT For each item, press v/V/b/B to select the power is on. When you turn on your camera (MONO) jack with the camera desired value, then press z or v/V/b/B to for the first time, the Clock Set screen connected to the USB cradle make the setting. appears (page 17). Turning off the power Slide the lens cover in the opposite direction of the arrow or press the POWER button again. The POWER lamp goes out, and the camera turns off. • If you open the lens cover too quickly, the camera might not turn on. If this happens, close the cover and then open it again more slowly. • When opening the lens cover, be careful not to touch the lens., filename[C:\Documents and Settings\gotanda\Desktop\3085733111DSCT1U2\03bas.fm] masterpage:Right 01cov.book Page 17 Monday, September 29, 2003 11:15 AM

Setting the date and time

Mode switch POWER button Clock Set Clock Set Y/M/D Y/M/D M/D/Y M/D/Y D/M/Y D/M/Y

POWER

2003 / 1 / 1 12 : 00 OK 2003 / 1 / 1 12 : 00 OK AM AM Cancel Cancel123, Set the mode switch to . , Slide the lens cover or press , Select the desired date display the POWER button to turn on format with v/V on the control • You can also carry out this operation when the the camera. button, then press z. mode switch is set to or . • To change the date and time on the Setup The POWER lamp (green) lights up and the Select from [Y/M/D] (year/month/day), screen, select [Clock Set] in (Setup 2) 2 Clock Set screen appears on the LCD [M/D/Y] (month/day/year) or [D/M/Y] (pages 44 and 107), and perform the procedure from step . screen. (day/month/year).3 • If the rechargeable button battery (page 109), which provides the power for saving the time data, ever becomes low, the Clock Set screen will appear again. When this happens, reset the date and time, by starting from step 3 above. Getting started, filename[C:\Documents and Settings\gotanda\Desktop\3085733111DSCT1U2\03bas.fm] masterpage:Left 01cov.book Page 18 Monday, September 29, 2003 11:15 AM Clock Set Clock Set Clock Set Y/M/D Y/M/D Y/M/D M/D/Y M/D/Y M/D/Y D/M/Y D/M/Y D/M/Y 2003 / 1 / 1 12 : 00 OK 2004 / 1 / 1 10 : 00 OK 2004 / 1 / 1 10 : 30 OK AM AM AM Cancel Cancel Cancel456, Select the year, month, day, , Set the numeric value with v/V , Select [OK] with B on the hour or minute item you want on the control button, then control button, then press z. to set with b/B on the control press z to enter it. The date and time are entered and the clock button. After entering the number, v/V moves to starts to keep time. The item to be set is indicated with v/V. the next item. Repeat steps 4 and 5 until all of the items are set. • To cancel the date and time setting, select [Cancel] with v/V/b/B on the control button, then press z. • If you selected [D/M/Y] in step 3, set the time on a 24-hour cycle. • Midnight is indicated as 12:00 AM, and noon as 12:00 PM., filename[C:\Documents and Settings\gotanda\Desktop\3085733111DSCT1U2\04bas.fm] masterpage:Right 01cov.book Page 19 Monday, September 29, 2003 11:15 AM

Shooting still images Inserting and removing a “Memory Stick Duo”

Terminal side123Access lamp , Open the battery/“Memory , Insert the “Memory Stick Duo.” , Close the battery/“Memory

Stick Duo” cover. Stick Duo” cover.

Insert a “Memory Stick Duo” all the way in Slide the cover in the direction of the arrow. until it clicks as illustrated. To remove a “Memory Stick Duo” Open the battery/“Memory Stick Duo” • When using this camera, the “Memory • When inserting a “Memory Stick Duo,” make Stick Duo” Adaptor (supplied) is not sure of the direction and insert it all the way to cover, then push the “Memory Stick Duo” necessary. the connector. If the “Memory Stick Duo” is to pop it out. • Be careful not to drop the battery pack when not inserted correctly, you may not be able to opening or closing the battery/“Memory Stick record or display images with the “Memory • Whenever the access lamp is lit, the Duo” cover. Stick Duo.” And also it may result in camera is recording or reading an • For details on “Memory Stick Duo,” see malfunction of both the camera and “Memory image. Never open the battery/“Memory page 109. Stick Duo.” Stick Duo” cover or turn off the power at this time. The data may be corrupted. Shooting still images, filename[C:\Documents and Settings\gotanda\Desktop\3085733111DSCT1U2\04bas.fm] masterpage:Left 01cov.book Page 20 Monday, September 29, 2003 11:15 AM

Setting the still image size

Mode switch 5M 5M 5M 3:2 3:2 3M 3M 1M 1M 1M VGA VGA Image Size Image Size123, Set the mode switch to , and , Press (Image Size). , Select the desired image size turn on the power. with v/V on the control button. The Image Size setup appears. The image size is set. • For details on the image size, see page 21. When the setting is complete, press (Image Size) so that the Image Size setup disappears from the LCD screen. • The image size selected here is maintained even when the power is turned off., filename[C:\Documents and Settings\gotanda\Desktop\3085733111DSCT1U2\04bas.fm] masterpage:Right1:2 01cov.book Page 21 Monday, September 29, 2003 11:15 AM

Image size

You can choose image size (number of pixels) and image quality (compression Image size Usage guidelines ratio) based on the kind of images you want 5M1) (2592×1944) Large • For saving important images, printing in A4 size or to shoot. The larger you make the image printing A5 size high density images3:22) (2592×1728) size and the higher you make the image 3M (2048×1536) quality, the better your image, but also the larger the amount of data needed to preserve 1M (1280×960) • For printing in postcard size your image. This means you can save fewer • For recording a larger number of imagesVGA (640×480) images in your “Memory Stick Duo.” Small • For attaching images to e-mail or creating home pages Choose an image size and quality 1) The factory setting is [5M]. It is the highest image quality on this camera. 2) appropriately for the kind of images you Images are recorded in the same 3:2 aspect ratio as photograph printing paper or postcards, etc. want to shoot.

The number of images that can be saved in a “Memory Stick Duo”3)

• When images recorded using earlier Sony The number of images that can be saved in Fine (Standard)4) mode are shown below. models are played back on this camera, the display may differ from the actual image size. (Units: number of images) • When the images are viewed on the LCD Capacity screen of the camera, they all look the same 16MB 32MB 64MB 128MB MSX-M256 MSX-M512Image size size. • Number of shooting images can differ from 5M 6 (11) 12 (23) 25 (48) 51 (96) 92 (174) 188 (354) these values according to shooting conditions. 3:2 6 (11) 12 (23) 25 (48) 51 (96) 92 (174) 188 (354) • When the number of remaining shooting images is greater than 9999, the “>9999” 3M 10 (18) 20 (37) 41 (74) 82 (149) 148 (264) 302 (537) indicator appears on the LCD screen. 1M 24 (46) 50 (93) 101 (187) 202 (376) 357 (649) 726 (1320) • You can resize the images later (Resize VGA 97 (243) 196 (491) 394 (985) 790 (1975) 1428 (3571) 2904 (7261) function, see page 67). 3) When [Mode] (REC Mode) is set to [Normal] For the number of images that can be saved in other modes, see page 100. 4) For more information about the image quality (compression ratio), see page 44. Shooting still images, filename[C:\Documents and Settings\gotanda\Desktop\3085733111DSCT1U2\04bas.fm] masterpage:Left 01cov.book Page 22 Monday, September 29, 2003 11:15 AM

Basic still image shooting — Using auto adjustment mode

Mode switch 60min VGA FINE 101 S AF 30 F2.8 AE/AF lock indicator Flashes greent123Light up , Set the mode switch to , and , Hold the camera steadily with , Press and hold the shutter slide the lens cover to turn on both hands and position the button halfway down. the power. subject in the center of the The beep sounds but the image is not yet focus frame. The name of the folder where the image will recorded. When the AE/AF lock indicator be recorded appears on the LCD screen for Do not touch the lens portion, flash portion, changes from flashing to steadily lit, the approximately five seconds. or microphone (page 8) when you hold the camera is ready for shooting. camera. (The LCD screen may be frozen for a split • This camera can create new folders and select second depending on the subject.) folders to be stored in the “Memory Stick Duo” • The minimum focal distance to a subject is (page 45). approx. 50 cm (19 3/4 inches). • If you release the shutter button, shooting will To shoot subjects at distances closer than this, be canceled. use close-ups (Macro) mode (page 27). • When the camera does not beep, the AF adjustment is not complete. You can continue to shoot, but the AF is not set properly (except in Continuous AF, page 48)., filename[C:\Documents and Settings\gotanda\Desktop\3085733111DSCT1U2\04bas.fm] masterpage:Right 01cov.book Page 23 Monday, September 29, 2003 11:15 AM (Magnifying glass mode) 60min Mode switch VGA 101 95 (page 32)When you set the mode switch to , the functions that can be used change as follows (Twilight mode) (page 32) according to (Camera) in the menu. (Twilight portrait mode) (page 32) S AF (Landscape mode) (page 33) Program (Snow mode) (page 33) Auto 4 Camera (Beach mode) (page 33)Mode (High-speed shutter mode) , Press the shutter button fully Still image auto shooting [Auto] (page 33) down. The focus, exposure and white balance are (Fireworks mode) (page 33) automatically adjusted as needed to allow The shutter sounds. The image will be easy shooting. In addition, the image recorded in the “Memory Stick Duo.” When To switch the shooting methodquality is set to [Fine], the AF range finder “Recording” disappears from the LCD frame is set to [Multi AF], and the metering 1 Set the mode switch to . screen, you can shoot the next image. mode is set to [Multi] (pages 47 and 52). 2 Press MENU. Only (Camera), [Mode] (REC Mode) • The frame indicated on the LCD screen shows 3 Select (Camera) with b on the and (Setup) appear in the menu. the focus adjustment range (AF range finder, control button. page 47). 4 Select the desired shooting mode with • When operating the camera using a battery Still image program shooting [Program] v/V on the control button.pack, if you do not operate the camera for a while during recording or playback, the camera The necessary adjustments are made turns off automatically to prevent wearing automatically like still image auto shooting, down the battery (page 16). but you can also change the focus and other adjustments as desired. In addition, you can also set the desired shooting functions using menus (pages 43 and 102). Shooting still images, filename[C:\Documents and Settings\gotanda\Desktop\3085733111DSCT1U2\04bas.fm] masterpage:Left2:1 01cov.book Page 24 Monday, September 29, 2003 11:15 AM

Checking the last image you

shot — Quick Review

Auto Focus There are two Auto Focus functions: “AF

60min VGA When you try to shoot a subject that is range finder frame” which sets the focus 101 8/8Review difficult to focus on, the AE/AF lock position according to the subject position indicator changes to flashing slowly. and size, and “AF mode” which sets the The Auto Focus function may have focus start/finish timing according to the difficulty working under the following AF response and the battery consumption. 101-0029 20041110:30PM

RETURN

conditions. In such cases, release the shutter See page 47 for details. button, then recompose the shot and focus again. • The subject is distant from the camera and dark. , Press b (7) on the control • The contrast between the subject and its background is poor. button. • The subject is seen through glass, such as To return to the normal shooting mode, a window. press lightly on the shutter button or press • A fast-moving subject. b (7) again. • The subject reflects or has a lustrous finish, such as a mirror or a luminous To delete the image displayed on the body. LCD screen • A flashing subject. • A backlit subject. 1 Press (Delete). 2 Select [Delete] with v on the control button, then press z. The image is deleted., filename[C:\Documents and Settings\gotanda\Desktop\3085733111DSCT1U2\04bas.fm] masterpage:Right2:1 01cov.book Page 25 Monday, September 29, 2003 11:15 AM

Indicators on the LCD screen during shooting Using the zoom feature

Indicators on W (wide-angle) T (telephoto) 60min VGA 101 96 60min VGA 101 60min VGA 101WT96WT96 x1.1 x5.0 S AF S AF S AF r Histogram on (Image information can also be displayed during playback.) Each time you press , the display 60min VGA 10196 , Press the zoom button to changes in the following order. choose the desired image size for shooting. • When shooting/viewing movies, the status of the LCD screen changes as follows: Indicators on t Indicators off t LCD backlight off S AF The minimum focal distance to the • For a detailed description of the indicators, see subject r page 114. Indicators off Approx. 50 cm (19 3/4 inches) from the lens • For a detailed description of the histogram, see surface page 51. • You can extend the battery remaining time by turning off the LCD backlight. • You cannot change the zoom scale while • This setting is maintained even when the power shooting movie. is turned off. S AF r LCD backlight off Shooting still images, filename[C:\Documents and Settings\gotanda\Desktop\3085733111DSCT1U2\04bas.fm] masterpage:Left 01cov.book Page 26 Monday, September 29, 2003 11:15 AM

Zoom

The W side of this line is optical zoom, Image size Maximum zoom scale Your camera is equipped with zoom and the T side is digital zoom 3M 3.8× functions that enlarge the image using optical zoom and two types of digital 1M 6.1× processing. Digital zoom can be selected VGA 12× from smart zoom or precision digital zoom. When you purchase your camera, When digital zoom is set, the zoom method the image size is set to [5M]. Smart switches from optical zoom to digital zoom zoom cannot be used when the when the zoom scale exceeds 3×. image size is set to [5M] or [3:2], so To use only the optical zoom, set [Digital Zoom scaling indicator set a different image size. Zoom] to [Off] on the Setup screen (page 106). In this case, the digital zoom • • When using the smart zoom, the image on the The indicator differs according to the zoom area does not appear in the zoom scale LCD screen may look rough. However, this has type. no effect on the recorded image. display bar on the LCD screen, and the – Optical zoom: • You cannot use the smart zoom in the Multi maximum zoom is 3×. The enlargement – Smart zoom: Burst mode. method and the zoom scale differ according – Precision digital zoom: • The AF range finder frame does not appear to the image size and the zoom type, so when using the digital zoom. The , or Precision digital zoom select the zoom to match the shooting indicators flashes, and AF operates with All image sizes are enlarged up to a purpose. priority on subjects located near the center. maximum 6×. This function cuts out and When digital zoom is set and you press the enlarges a certain portion of the image, so zoom button, the zoom scaling indicator Smart zoom the image quality deteriorates. To set appears on the LCD screen as follows. The image is enlarged with almost no precision digital zoom, set [Digital Zoom] distortion. This lets you use smart zoom to [Precision] on the Setup screen with the same feeling as optical zoom. To (page 106). set smart zoom, set [Digital Zoom] to [Smart] on the Setup screen (page 106). When you purchase your camera, it is set to smart zoom. The maximum zoom scale depends on the selected image size as follows., filename[C:\Documents and Settings\gotanda\Desktop\3085733111DSCT1U2\04bas.fm] masterpage:Right 01cov.book Page 27 Monday, September 29, 2003 11:15 AM

Shooting close-ups — Macro

• Using Spot AF is recommended (page 47). • To shoot at even closer distances than close-ups 60min VGA 10196 (Macro) recording, use (Magnifying glass mode) (page 32). S AF The close-ups (Macro) recording mode is , Set the mode switch to , and used when zooming up subjects such as press B ( ) on the control flowers or insects. Setting the zoom all the button. way to the W side lets you shoot subjects at distances as close as 8 cm. However, the The (macro) indicator appears on the minimum focus distance varies according LCD screen. to the zoom position. Therefore, shooting with the zoom set all the way to the W side • If the menu is currently displayed, press MENU is recommended. first so that the menu disappears. • You can also carry out this operation when the mode switch is set to . When the zoom is set all the way to • You cannot use this function when the W side: (Camera) in the menu is set to Approx. 8 cm (3 1/4 inches) from the lens (Magnifying glass mode), (Twilight mode), surface (Landscape mode) and (Fireworks mode). When the zoom is set all the way to the T side: Approx. 25 cm (9 7/8 inches) from the lens surface Shooting still images, filename[C:\Documents and Settings\gotanda\Desktop\3085733111DSCT1U2\04bas.fm] masterpage:Left1:2 01cov.book Page 28 Monday, September 29, 2003 11:15 AM

Using the self-timer

60min 60min 101VGA 101 VGA 60min VGA FINE 101 95 96 96 S AF S AF S AF 30 F2.8212, Center the subject in the frame. , Set the mode switch to , and , Center the subject in the frame.

Press and hold the shutter press V ( ) on the control Press and hold the shutter

button halfway down, then button. button halfway down, then press the shutter button fully press the shutter button fully The (self-timer) indicator appears on the down. LCD screen. down. The self-timer lamp (page 8) flashes and a To return to normal recording mode • When recording with the self-timer, place the beep sounds after you press the shutter Press B ( ) on the control button again. camera in a stable location. If you place the The indicator disappears from the LCD camera in an unstable location for recording, button until the shutter operates the camera may fall and become damaged or (approximately 10 seconds later).screen. malfunction. • If the menu is currently displayed, press MENU To cancel the self-timer in the middle • When shooting in close-ups (Macro) mode, the first so that the menu disappears. focus depth becomes extremely shallow, and of the operation• You can also carry out this operation when the the entire subject may not be in focus. Press V ( ) on the control button again. mode switch is set to . • When shooting in close-ups (Macro) mode, the The indicator disappears from the LCD AF speed drops in order to focus accurately on screen. close subjects. • If you press the shutter button while standing in front of the camera, the focus and the exposure 28 may not be correctly set., filename[C:\Documents and Settings\gotanda\Desktop\3085733111DSCT1U2\04bas.fm] masterpage:Right 01cov.book Page 29 Monday, September 29, 2003 11:15 AM

Selecting a flash mode

(No flash): The flash does not strobe To prevent subjects’ eyes from 60min VGA 101 96 regardless of the surrounding brightness. appearing red Set [Red Eye Reduction] to [On] on the • If the menu is currently displayed, press MENU first so that the menu disappears. Setup screen (page 106). The indicator • When [ISO] is set to [Auto] in the menu, the appears on the LCD screen, and the flash S AF recommended shooting distance using the flash pre-strobes before shooting to reduce the is approx. 0.3 m to 1.5 m (11 7/8 inches to red-eye phenomenon. 59 1/8 inches) (W)/0.5 m to 1.5 m (19 3/4 inches to 59 1/8 inches) (T). • You can change the brightness of the flash with (Flash Level) in the menu (page 55). (You , Set the mode switch to , and cannot change the brightness of the flash while (Camera) is set to [Auto] in the menu.) press v ( ) on the control • When using the SL (Slow synchro) or (No button repeatedly to select a flash) mode, the shutter speed becomes slower m flash mode. in dark places. Be careful not to allow your hand to shake while holding the camera. Each time you press v ( ), the indicator • While charging the flash, the /CHG lamp changes as follows. flashes. After the charging is complete, the lamp goes out. No indicator (Auto): The flash • This setting is maintained even when the power automatically strobes when shooting is turned off. images in a dark place. The factory setting • Red-eye reduction may not produce the desired is Auto. effects depending on individual differences, the (Forced flash): The flash strobes distance to the subject, if the subject does not regardless of the surrounding brightness. see the pre-strobe, or other conditions. SL (Slow synchro): The flash strobes regardless of the surrounding brightness. The shutter speed is slow in a dark place, so you can clearly shoot the background that is out of flash light. Shooting still images, filename[C:\Documents and Settings\gotanda\Desktop\3085733111DSCT1U2\04bas.fm] masterpage:Left2:1 01cov.book Page 30 Monday, September 29, 2003 11:15 AM

Inserting the date and time

on a still image

Shooting images with the AF • The AF range finder frame does not appear.

illuminator The , or indicators flashes, and AF operates with priority on subjects located near The AF illuminator is fill light to focus the center. more easily on a subject in dark • The AF illuminator operates only when Program Auto surroundings. The appears on the LCD (Camera) is set to [Auto], [Program], ON Camera screen and the AF illuminator emits red (Magnifying glass mode), (Twilight Mode portrait mode), (Snow mode) or light when the shutter button is pressed (Beach mode) in the menu. halfway until the focus is locked. • The AF illuminator emits very bright light. MENU Although there are no problems with safety, 60min VGA FINE 101 96 directly looking into the AF illuminator emitter 1 ON at close range is not recommended, as you may see residual spots for several minutes , Set the mode switch to , then afterwards, such as after looking into a press MENU. flashlight. S AF 30 F2.8 The menu appears. When this function is not needed, set [AF • When images are shot with the date and time Illuminator] to [Off] on the Setup screen superimposed, the date and time cannot be (page 106). removed later. • The date and time do not appear on the LCD screen during shooting, instead, the • If AF illuminator light does not reach the indicator appears on the LCD screen. The subject sufficiently or the subject has no actual date and time appear in red during contrast, focus will not be achieved. (A distance playback only. up to approximately 2.2 m (86 5/8 inches) is • The date and time is not inserted in Multi Burst recommended.) mode. • Focus is achieved as long as AF illuminator • You can also carry out this operation with the light reaches the subject, even if the light is mode switch set to or . slightly off the center of the subject. • When the focus preset distance is set (page 49), the AF illuminator does not function., filename[C:\Documents and Settings\gotanda\Desktop\3085733111DSCT1U2\04bas.fm] masterpage:Right 01cov.book Page 31 Monday, September 29, 2003 11:15 AM Camera Camera AF Mode: Day&Time AF Mode: Single Digital Zoom: Date Digital Zoom: Smart Date/Time: Off Date/Time: Day&Time 1 Red Eye Reduction: 1 Red Eye Reduction: Off 2 AF Illuminator: 2 AF Illuminator: Auto Setup t Auto Review: Auto Review: On Mode PAGE SELECT234, Press B on the control button , Select (Camera) with v on , Select the date and time setting to advance to , then press B the control button, then press with v/V on the control button, again. B. then press z.

Select [Date/Time] with v/V,

The Setup screen appears. Day&Time: Superimposes the date, hour, then press B. and minute onto the image. Date: Superimposes the year, month and day onto the image. Off: Does not superimpose the date and time onto the image. After the setting has been completed, press MENU first so that the menu disappears, and shoot the image. • If you select [Date], the date is superimposed onto the image in the order selected in “Setting the date and time” (page 17). • This setting is maintained even when the power is turned off. Shooting still images, filename[C:\Documents and Settings\gotanda\Desktop\3085733111DSCT1U2\04bas.fm] masterpage:Left 01cov.book Page 32 Monday, September 29, 2003 11:15 AM

Shooting according to scene conditions — Scene Selection

You can select from eight different shooting modes (magnifying glass, twilight, twilight portrait, landscape, snow, beach, high- speed shutter and fireworks) in accordance with the shooting conditions. The camera automatically makes the optimum settings to match the scene, making it easy to shoot high quality images even under difficult conditions. • The close-ups (Macro) function does not work. • The close-ups (Macro) function does not work. • You cannot shoot in Exposure Bracket, Burst • You cannot shoot in Exposure Bracket, Burst Magnifying glass mode and Multi Burst mode. and Multi Burst mode. The subject appears on the LCD screen • The flash is set to (Forced flash) or (No • You cannot use the flash. magnified by up to 3.3×. This lets you see flash). • The focal distance to a subject is approx. 1 cm details that would otherwise be difficult to Twilight portrait modeto 20 cm (13/32 inch to 7 7/8 inches). confirm with the naked eye. Suitable for shooting portraits in dark • The optical zoom is locked to the W side and Distance to the Magnification cannot be used. places. Allows you to shoot sharp images of subject scale • When you press the zoom button, the image is people in dark places without losing the enlarged using the digital zoom. dark atmosphere of the surroundings. The 1 cm (13/32 inch) 3.3× shutter speed becomes slower, so be careful 2 cm (13/16 inch) 2.1× 1.1 not to allow your hand to shake while 5 cm (2 inches) 1.0× holding the camera. 10 cm (4 inches) 0.5× Twilight mode 20 cm (7 7/8 inches) 0.3× Allows you to shoot night scenes at far distance without losing the dark atmosphere of the surroundings. The shutter speed becomes slower, so be careful not to allow your hand to shake while holding the camera. • You cannot shoot in Exposure Bracket, Burst and Multi Burst mode. 32 • The flash is set to SL (Slow Synchro)., filename[C:\Documents and Settings\gotanda\Desktop\3085733111DSCT1U2\04bas.fm] masterpage:Right3 01cov.book Page 33 Monday, September 29, 2003 11:15 AM Landscape mode Beach mode Fireworks mode Focuses only on a distant subject to shoot When shooting seaside or lakeside scenes, Fireworks are recorded in all their splendor landscapes, etc. the blue of the water is clearly recorded. by setting the focus distance to infinity. The shutter speed becomes slower, so be careful not to allow your hand to shake while holding the camera. • The close-ups (Macro) function does not work. • The flash is set to (Forced flash) or (No • The flash is set to (Forced flash) or (No flash). flash). High-speed shutter mode • The close-ups (Macro) function does not work. Snow mode Use this mode to shoot moving subjects • You cannot use the flash. When shooting snowy scenes or other outdoors or in other bright places. • You can change the shutter speed by setting an places where the whole screen appears EV adjustment value (page 50). white, use this mode to prevent sunken • You cannot set the white balance. colors and record clear and sharp images. • You cannot shoot in Exposure Bracket, Burst and Multi Burst mode. • The shutter speed becomes faster, so images shot in dark places become darker. • The flash is set to (Forced flash) or (No flash). • The flash is set to (Forced flash) or (No flash). Shooting still images, filename[C:\Documents and Settings\gotanda\Desktop\3085733111DSCT1U2\04bas.fm] masterpage:Left 01cov.book Page 34 Monday, September 29, 2003 11:15 AM

NR slow shutter

The NR slow shutter mode removes noise from recorded images, providing clear Program Program images. When the shutter speed is 1/6 Auto Auto Camera Camera second or slower in (Twilight mode), Mode WB ISO (Twilight portrait mode) and (Fireworks mode), the camera automatically enters the NR slow shutter

MENU

1 2 function and “NR” is indicated next to the shutter speed indicator. , Set the mode switch to , then , Select (Camera) with b on Press the shutter button press MENU. the control button, then select fully down. the desired mode with v/V. The menu appears. 2 F2.8 To return to normal mode r Select [Auto] or [Program] with v/V on the Then the screen turns control button. black. Capturing • The setting is maintained even when the power is turned off. r Finally, when “Processing” disappears, Processing the image has been recorded. • When the NR slow shutter function is activated, be careful not to allow your hand to shake while holding the camera., filename[C:\Documents and Settings\gotanda\Desktop\3085733111DSCT1U2\05bas.fm] masterpage:Right2:1 01cov.book Page 35 Monday, September 29, 2003 11:15 AM

Viewing still images Viewing images on the LCD screen of your Viewing single images

camera Single (single-image) Index (nine-image) Index (sixteen-image) 60min VGA 101 8/9 screen screen screen 60min VGA 101 8/9 101-0008 20041110:30PM BACK/NEXT VOLUME 101-0008 20041110:30PM BACK/NEXT VOLUME • SINGLE DISPLAY • SINGLE DISPLAY 1 You can view images shot with your camera Index (nine-image/sixteen-image) , Set the mode switch to , and almost immediately on the LCD screen. screen turn on the power. You can select the following three methods Nine or sixteen images are displayed for viewing images. simultaneously in separate panels on the The last image in the selected recording LCD screen. folder (page 45) appears on the LCD Single (single-image) screen screen. You can view one image at a time, • For details on viewing movies, see page 71. displayed over the entire screen. • For a detailed description of the indicators, see • The image may appear rough right after page 116. playback starts due to the image processing. Viewing still images, filename[C:\Documents and Settings\gotanda\Desktop\3085733111DSCT1U2\05bas.fm] masterpage:Left1:2 01cov.book Page 36 Monday, September 29, 2003 11:15 AM

Viewing an index screen (nine-image or sixteen-image)

60min VGA 101 3/9 101-0003 20041110:30PM BACK/NEXT VOLUME • SINGLE DISPLAY • SINGLE DISPLAY , Select the desired still image , Press (Index) once. , Press (Index) once more. with b/B on the control button. The display switches to the index (nine- The display switches to the index b : To display the preceding image image) screen. (sixteen-image) screen. B : To display the next image To display the next (previous) index To display the next (previous) index screen screen Press v/V/b/B on the control button to Press v/V/b/B on the control button to move the yellow frame up/down/left/right. move the yellow frame up/down/left/right. To return to the single-image screen Press (Index) T side repeatedly, or press z on the control button., filename[C:\Documents and Settings\gotanda\Desktop\3085733111DSCT1U2\05bas.fm] masterpage:Right 01cov.book Page 37 Monday, September 29, 2003 11:15 AM

Viewing images on a TV screen

A/V connecting cable A/V OUT 1 (MONO) jack23TV/Video switch , Connect the A/V connecting , Connect the camera to the USB , Turn on the TV and set the TV/ cable (supplied) to the A/V OUT cradle. Video switch to “Video”. (MONO) jack of the USB cradle Connect the camera as illustrated. (supplied) and the audio/video • The name and location of this switch may differ depending on your TV. For details, see the input jacks of the TV. • Make sure the camera is securely connected to operating instructions supplied with the TV. the USB cradle. If your TV has stereo type input jacks, connect the audio plug (black) of the A/V connecting cable to the left audio input jack. • When the USB cable is connected to the USB cradle, remove the USB cable from the USB cradle. • Turn off both the camera and the TV before connecting the camera and the TV with the A/V connecting cable. Viewing still images, filename[C:\Documents and Settings\gotanda\Desktop\3085733111DSCT1U2\05bas.fm] masterpage:Left 01cov.book Page 38 Monday, September 29, 2003 11:15 AM Viewing images on a TV screen PAL-M system POWER If you want to view images on a TV screen, BrazilVGA 101 2/9 you need a TV with a video input jack and the A/V connecting cable (supplied). PAL-N system The color system of the TV must match that Argentina, Paraguay, Uruguay 101-0002 20041110:30PM BACK/NEXT VOLUME of your digital still camera. Check the following lists: SECAM system Bulgaria, France, Guiana, Hungary, Iran, NTSC system Iraq, Monaco, Poland, Russia, Ukraine, etc. 4 Bahama Islands, Bolivia, Canada, Central America, Chile, Colombia, Ecuador, , Set the mode switch to , and Jamaica, Japan, Korea, Mexico, Peru, turn on the camera. Surinam, Taiwan, the Philippines, the U.S.A., Venezuela, etc. Press b/B on the control button to select the desired image. PAL system Australia, Austria, Belgium, China, Czech • When using your camera abroad, it may be necessary to switch the video output signal to Republic, Denmark, Finland, Germany, match that of your TV system (page 107). Holland, Hong Kong, Italy, Kuwait, Malaysia, New Zealand, Norway, Portugal, Singapore, Slovak Republic, Spain, Sweden, Switzerland, Thailand, United Kingdom, etc., filename[C:\Documents and Settings\gotanda\Desktop\3085733111DSCT1U2\06bas.fm] masterpage:Right 01cov.book Page 39 Monday, September 29, 2003 11:15 AM

Deleting still images Deleting images

60min VGA 60min VGA 60min VGA 101 2/9 101 2/9 101 2/9 Delete Delete 101-0002 20041110:30PM Exit Exit BACK/NEXT VOLUME BACK/NEXT BACK/NEXT123, Set the mode switch to , and , Press (Delete). , Select [Delete] with v on the turn on the camera. control button, then press z. The image has not yet been deleted at this

Press b/B on the control point. The message “Access” appears, and the

button to select the image you image has been deleted. want to delete. • You cannot delete the protected image (page 66). To continue and delete other images • Note that you cannot restore deleted images. Display the image to be deleted with b/B on the control button. Then, select [Delete] with v and press z. To cancel deleting Select [Exit] with V on the control button, then press z. Deleting still images, filename[C:\Documents and Settings\gotanda\Desktop\3085733111DSCT1U2\06bas.fm] masterpage:Left 01cov.book Page 40 Monday, September 29, 2003 11:15 AM

Deleting images in index (nine-image or sixteen-image) mode

Delete Delete Exit Select All In This Folder Exit Select All In This Folder SELECT TO NEXT123, While an index (nine-image/ , Select [Select] with b/B on the , Select an image you want to sixteen-image) screen control button, then press z. delete with v/V/b/B on the (page 36) is displayed, press control button, then press z. (Delete). The (Delete) indicator appears on the selected image. At this point, the image has • Note that you cannot restore deleted images. not yet been deleted. Repeat this step for all of the images you want to delete. • To cancel a selection, select the image, then press z again so that the indicator disappears., filename[C:\Documents and Settings\gotanda\Desktop\3085733111DSCT1U2\06bas.fm] masterpage:Right1:2 01cov.book Page 41 Monday, September 29, 2003 11:15 AM

Formatting a “Memory Stick Duo” MENU

Setup t Delete Exit OK Mode41Terminal side 2 , Press (Delete) and select , Insert the “Memory Stick Duo” , Turn on the camera, then press [OK] with B on the control you want to format into the MENU. button, then press z. camera. Press B on the control button to advance to , then press B The message “Access” appears, and the • The term “formatting” means preparing a images have been deleted. again.“Memory Stick Duo” to record images; this process is also called “initialization.” The The Setup screen appears. To cancel deleting “Memory Stick Duo” provided with this Select [Exit] with b on the control button, camera, and those available commercially, are • This operation is available no matter what then press . already formatted, and can be used z position the mode switch is in. immediately. To delete all the images in the • When you format a “Memory Stick Duo,” folder be aware that all data including protected images in the “Memory Stick Select [All In This Folder] with B on the Duo” will be permanently erased. control button in step 2, then press z. Select [OK], then press z. All of the unprotected images in the folder are deleted. To cancel deleting, select [Cancel], then press z. Deleting still images, filename[C:\Documents and Settings\gotanda\Desktop\3085733111DSCT1U2\06bas.fm] masterpage:Left 01cov.book Page 42 Monday, September 29, 2003 11:15 AM Memory Stick Tool 60min Format: OK Format Create REC. folder: Cancel Change REC. folder: 1 All data will be erased 2 Ready?

OK

Cancel34, Select (Memory Stick Tool) , Select [OK] with v on the with v/V on the control button. control button, then press z.

Select [Format] with B, then

The message “Formatting” appears. When press B. this message disappears, the format is

Select [OK] with v, then press complete.

z. To cancel the formatting Select [Cancel] with V on the control button, then press z. • Using the AC Adaptor is recommended to prevent the power from turning off partway through formatting., filename[C:\Documents and Settings\gotanda\Desktop\3085733111DSCT1U2\07bef.fm] masterpage:Right 01cov.book Page 43 Monday, September 29, 2003 11:15 AM Before advanced operations

Changing the menu settings To turn off the menu display How to setup and Press MENU again.

operate your camera a Press MENU. The menu appears. • You cannot select items displayed in gray. The usage of the menus and Setup screen • For a detailed description of the menu items, items that are most frequently used for see page 102. “Advanced operations” is described below. Program Auto Camera Control button WB ISO

MENU

b Press b/B on the control Mode switch button to select the item you want to set. Auto

ISO

WB ISO c Press v/V on the control button to select the desired setting. The selected setting is enlarged and the setting is entered.

Whenavor V mark is displayed

next to a setting item This means that there are also other setting items. To display these other items, scroll the screen with v/V. Before advanced operations, filename[C:\Documents and Settings\gotanda\Desktop\3085733111DSCT1U2\07bef.fm] masterpage:Left 01cov.book Page 44 Monday, September 29, 2003 11:15 AM

Changing the items on the To cancel the Setup screen Setup screen Press MENU again. Deciding the still

image quality a Press MENU. To return to the menu from the The menu appears. Setup screen Mode switch: b Press B on the control button Press b on the control button to return to the You can select the still image quality from to advance to , then press B position enclosed by the frame in step 3, [Fine] or [Standard]. again. then press b again.

Before operation

The Setup screen appears. • For a detailed description of the Setup items, Set (Camera) in the menu to other than see page 106. [Auto] (pages 43 and 102). Control button Setup MENUt Mode switch c Press v/V/b/B on the control button to select the item you want to set. The frame of the selected item turns yellow. Setup 2 File Number: USB Connect: Video Out: OK Clock Set: Cancel d Press z on the control button to enter the setting., filename[C:\Documents and Settings\gotanda\Desktop\3085733111DSCT1U2\07bef.fm] masterpage:Right 01cov.book Page 45 Monday, September 29, 2003 11:15 AM a Set the mode switch to . Creating a new folder

Creating or selecting

b Press MENU. a folder a Select (Memory Stick Tool) The menu appears. with v/V. c Select (P.Quality) with b/B, Mode switch: / / b Select [Create REC. Folder] then select the desired image Your camera can create multiple folders with B/v/V, and [OK] with B/v, quality with v/V. within a “Memory Stick Duo.” You can then press z. select the folder used to store images. The creating folder screen appears. When not creating a new folder, “101MSDCF” folder is selected as the 60min Fine FINE Create REC. Folder Standard recording folder. P.Quality You can create folders up to “999MSDCF.” Creating REC. folder 102MSDCF Mode BRK M PFX Ready?

OK

Cancel

Before operation

Set the menu to the Setup screen (pages 44 and 106). c Select [OK] with v, then press z. Control button MENU A new folder is created with a number one higher than the largest number in Mode switch the “Memory Stick Duo”, and the folder becomes the recording folder.

To cancel folder creation

Select [Cancel] in step 2 or 3. • Once you create a new folder, you cannot delete the new folder with the camera. • Images are recorded in the newly created folder until a different folder is created or selected. • Up to 4000 images can be stored in one folder. When the folder capacity is exceeded, a new folder is automatically created. Before advanced operations, filename[C:\Documents and Settings\gotanda\Desktop\3085733111DSCT1U2\07bef.fm] masterpage:Left 01cov.book Page 46 Monday, September 29, 2003 11:15 AM

Changing the recording

folder a Select (Memory Stick Tool) with v/V. b Select [Change REC. Folder] with B/V, and [OK] with B/v, then press z. The recording folder selection screen appears. Select REC. Folder 102 2/2 Folder Name:102MSDCF No. Of Files: 0 Created: 2004111:05:34AM

OK

Cancel BACK/NEXT c Select the desired folder with b/B, and [OK] with v, then press z.

To cancel changing the

recording folder Select [Cancel] in step 2 or 3. • You cannot select the “100MSDCF” folder as a recording folder. • The image is stored in the newly selected folder. You cannot move images to a different folder with this camera., filename[C:\Documents and Settings\gotanda\Desktop\3085733111DSCT1U2\08adv.fm] masterpage:Right 01cov.book Page 47 Monday, September 29, 2003 11:15 AM

Advanced still image shooting Choosing a focus range a Set the mode switch to or Choosing an auto finder frame .

focus method — AF range finder b Press MENU.

Mode switch: / The menu appears.Multipoint AF ( )

You can set the AF range finder frame and The camera calculates the distance in five c Select 9 (Focus) with b/B, the AF mode. places to the left, right, top, bottom and in then select the desired AF

AF range finder frame the center of the image, letting you shoot range with v/V.

using the auto focus function without The AF range finder frame selects the focus 60min VGAFINE 101 worrying about the image composition. 98 position according to the subject position This is useful when it is difficult to focus on and size. AF range the subject because it is not in the center of finder frame

AF Mode the frame. You can check the position

The AF mode sets the focus start/finish where the focus was adjusted using the S AF timing according to the AF response and the green frame. The focus is adjusted automatically. battery consumption. The Multipoint AF is the factory setting. When you press and hold the shutter button halfway down and the focus is

Before operation Center AF ( ) adjusted, the color of the AF range

When shooting still images, set This is useful for focusing on a subject near finder frame changes from white to (Camera) in the menu to other than [Auto] the center of the frame. Use together with green. or (Fireworks mode) (pages 43 and the AF lock function lets you shoot in the 102). • When you are shooting movies and you choose desired image composition. Multipoint AF, the distance to the center of the Control button screen is estimated as an average, so the AF MENU Spot AF ( ) works even with a certain amount of vibration. Mode switch This is useful when focusing on an The AF range finder frame is . Center AF and Spot AF automatically focus only on extremely small subject or a narrow area. selected frame, so these are convenient when Use together with the AF lock function lets you want to focus only on what you aim at. you shoot in the desired image composition. • When you use the digital zoom or AF Take care to hold the camera steady so that illuminator, priority AF movement is given to the subject does not deviate from the range subjects in or near the center of the frame. In finder frame. this case the , or indicator flashes and the AF range finder frame is not displayed. Advanced still image shooting, filename[C:\Documents and Settings\gotanda\Desktop\3085733111DSCT1U2\08adv.fm] masterpage:Left 01cov.book Page 48 Monday, September 29, 2003 11:15 AM

Choosing a focus operation Continuous AF ( C AF) Before operation

— AF Mode The camera adjusts the focus before the Set the menu to the Setup screen (pages 44 shutter button is pressed and held halfway and 106).

Single AF ( S AF) down, and then continues to adjust the focus a Select (Camera) with v.

This mode is useful for shooting stationary even after AF lock is completed. This subjects. The focus is not adjusted before allows shooting of moving subjects with b Select [AF Mode] with B/v, the shutter button is pressed and held continued focus. and select the desired mode halfway down. When the shutter button is with B/v/V. pressed and held halfway down and AF lock • The focus is not adjusted after the lock is completed in the following cases, and the C AF Camera is complete, the focus is locked. indicator flashes. The camera operates in AF Mode: xSingleDigital Zoom: Monitor The factory setting is Single AF. Monitoring AF mode. Date/Time: Cont – When shooting in the dark place Red Eye Reduction:2 AF Illuminator:

Monitoring AF (M AF) – When shooting with a slow shutter speed Auto Review:

This shortens the time needed for focusing. • The AF range finder frame is set to Center AF. • Focus adjustment may not be able to keep up The camera automatically adjusts the focus when shooting fast moving subjects. When you select [Single] or [Monitor], before the shutter button is pressed and held • There is no lock sound when the focus is also select the AF range finder frame halfway down, letting you compose images adjusted. (page 47). with the focus already adjusted. When the • When recording with the self timer, the focus is shutter button is pressed and held halfway locked when you press the shutter button all the down and AF lock is complete, the focus is way down. • Battery consumption may be faster than in any locked. other AF mode. • Battery consumption may be faster than in Single AF mode., filename[C:\Documents and Settings\gotanda\Desktop\3085733111DSCT1U2\08adv.fm] masterpage:Right2:1 01cov.book Page 49 Monday, September 29, 2003 11:15 AM Shooting techniques • When you are using AF lock, you can Setting the distance When shooting with the subject at the edge of capture an image with the correct focus even the frame, or when using Center AF or Spot if the subject is at the edge of the frame. to the subject AF, the camera may focus on the center instead • You can carry out the AF lock adjustment of on the subject at the edge of the frame. In a process before you press the shutter button — Focus preset case like this, use AF lock to focus on the fully down. Mode switch: / subject, and then recompose the picture and shoot (except in Continuous AF mode). When shooting an image using a previously Compose the shot so that the subject is set distance to the subject, or when shooting centered in the AF range finder, and press the a subject through a net or through window shutter button halfway down. glass, it is difficult to get the proper focus in When the AE/AF lock indicator stops flashing auto focus mode. In these cases, use of the and remains on, return to the fully composed Focus preset is convenient. shot, and press the shutter button fully down. AE/AF lock indicator Before operation When shooting still images, set 60min VGA FINE 101 98 (Camera) in the menu to other than [Auto] AF range or (Magnifying glass mode) (pages 43 finder frame and 102). S AF F2.8 30 Control button m MENU 60min VGAFINE 101 97 Mode switch S AF Advanced still image shooting, filename[C:\Documents and Settings\gotanda\Desktop\3085733111DSCT1U2\08adv.fm] masterpage:Left 01cov.book Page 50 Monday, September 29, 2003 11:15 AM a Set the mode switch to or a Set the mode switch to or . Adjusting the . exposure b Press MENU. b Press MENU. The menu appears. — EV adjustment The menu appears. c Select 9 (Focus) with b/B, Mode switch: / c Select (EV) with b/B. then select the distance to the You can manually change the exposure set The value of the exposure adjustment subject with v/V. by the camera. This function lets you obtain is displayed. You can select from the following the proper exposure when the contrast distance settings. (difference between bright and dark) 0.5m, 1.0m, 3.0m, 7.0m, ∞ (unlimited between the subject and the background is distance) extremely large. You can select values 0EV 0EV

EV

ranging from +2.0EV to –2.0EV in steps of WB ISO 1.0m 0.5m 0.5m 1/3EV. Spot AF Center AF d Select the desired exposure Multi AF Before operation value. Focus WB ISO When shooting still images, set Select the value with v/V. Adjust the (Camera) in the menu to other than [Auto] exposure value while checking the (pages 43 and 102). brightness of the background.

To return to auto focus mode

Select [Multi AF], [Center AF] or [Spot Control button To reactivate auto exposure AF] in step 3. MENU Select [0EV] in step 4. • Focal point information may not show the exact Mode switch • If a subject is being shot in extremely bright or distance. dark conditions, or the flash is used, the • When (Camera) in the menu is set to exposure adjustment may not be effective. (Landscape mode) or (Fireworks mode), the focus preset is restricted to ∞ (unlimited distance)., filename[C:\Documents and Settings\gotanda\Desktop\3085733111DSCT1U2\08adv.fm] masterpage:Right2:1 01cov.book Page 51 Monday, September 29, 2003 11:15 AM

Displaying a histogram • The histogram also appears when the

(Camera) in the menu is set to [Auto], but you Shooting techniques A histogram is a graph showing the cannot adjust the exposure. Normally, the camera automatically sets the brightness of an image. The horizontal axis • The histogram also appears when you press exposure. If the image is too dark or too shows the brightness, and the vertical axis while playing back a single image bright as shown below, we recommend that (page 35) or during Quick Review (page 24). you adjust the exposure value manually with shows the number of pixels. The graph • The histogram does not appear in the following viewing the histogram. When shooting a display indicates a dark image when cases: back-lit subject or a subject against a white skewed to the left side, and a bright image – During Quick Review of an image recorded (e.g. snowy) background, adjust the when skewed to the right side. The in Exposure Bracket mode exposure toward the + side. When shooting a histogram is useful to check the exposure – When using playback zoom black subject that fills the screen, adjust the during recording and playback when the – When viewing and shooting movies exposure toward the – side. • appears in the following cases: screen is difficult to see. – When recording in the digital zoom range – When the image size is [3:2] 80 5M FINE 101 4 – When rotating a still image – When viewing Multi Burst images • The histogram before recording represents the histogram of the image displayed on the LCD screen at that time. A difference occurs in the Brightness 0EV Underexposed t Adjust toward +histogram before and after you press the shutter Dark Bright button. When this happens, check the histogram while playing back a single-image or during

Set the mode switch to . Quick Review.a In particular a large difference may appear in

b Press to display the the following cases: – When the flash strobes histogram. – When [PFX] (P.Effect) is set to [Solarize] – When the shutter speed is slow or high Appropriate exposure c Press MENU. • The histogram may not appear for images The menu appears. recorded using other cameras. d Adjust the exposure based on the histogram. Overexposed t Adjust toward – Number of pixels Advanced still image shooting, filename[C:\Documents and Settings\gotanda\Desktop\3085733111DSCT1U2\08adv.fm] masterpage:Left 01cov.book Page 52 Monday, September 29, 2003 11:15 AM

Selecting the Shooting three

metering mode images with the Spot Spot metering Mode switch: / Multi cross hair exposure shiftedMetering Mode WB ISO The camera measures the brightness to — Exposure Bracket determine the exposure. This function lets Mode switch: you select the following two metering Before operation modes to determine which portion of the When shooting still images, set The Exposure Bracket function records a subject to use for measuring the brightness. (Camera) in the menu to other than [Auto] series of three images with the exposure (pages 43 and 102). values automatically shifted. This lets you

Multi-pattern metering (no select the image with the appropriate Control button

indicator) exposure after recording when you are MENU unable to shoot good pictures depending on The image is divided into multiple regions Mode switch the brightness of the subject. and metering is performed for each region. The camera judges the subject position and background brightness, and determines a Before operation well-balanced exposure. Set (Camera) in the menu to other than The factory setting is multi-pattern [Auto], (Magnifying glass mode), metering. (Twilight mode), (Twilight portrait mode) or (Fireworks mode) (pages 43

Spot metering ( ) and 102).

Metering is performed for only a portion of a Set the mode switch to or Control button the subject. This lets you adjust the . MENU exposure to the subject even when the Mode switch subject is backlit or there is strong contrast b Press MENU. between the subject and the background. The menu appears. Position the spot metering cross hair on one point of the subject you want to shoot. c Select (Metering Mode) with To focus on the metering position, setting b/B, then select the desired 9 (Focus) to [Center AF] is recommended metering mode with v/V. (page 47)., filename[C:\Documents and Settings\gotanda\Desktop\3085733111DSCT1U2\08adv.fm] masterpage:Right 01cov.book Page 53 Monday, September 29, 2003 11:15 AM a Set the mode switch to . • You cannot use the flash in this mode. 1st image (shifted in the • During shooting in this mode, the images are + direction) b Press MENU. not displayed on the LCD screen. Compose the The menu appears. image before pressing the shutter button. • The focus and white balance are adjusted for c Select [Mode] (REC Mode) with the first image, and these settings are also used / , then select [Exp Brktg] for the other images.b B • When the exposure is manually adjusted with v/V. (page 50), the exposure is shifted based on the adjusted brightness. d Select [BRK] (Bracket Step) • The recording interval is approximately with b/B, then select the 0.36 second. 2nd image (appropriate desired exposure adjustment • If the subject is too bright or too dark, you may exposure for the camera) be unable to shoot properly with the selected value with v/V. bracket adjustment value. ±1.0EV: Shifts the exposure value by plus or minus 1.0EV. ±0.7EV: Shifts the exposure value by plus or minus 0.7EV. ±0.3EV: Shifts the exposure value by plus or minus 0.3EV. 3rd image (shifted in the e Shoot the image. – direction)

To return to normal mode

Select [Normal] in step 3. Advanced still image shooting, filename[C:\Documents and Settings\gotanda\Desktop\3085733111DSCT1U2\08adv.fm] masterpage:Left 01cov.book Page 54 Monday, September 29, 2003 11:15 AM (Incandescent) c Select [WB] (White Bal) with b/

Adjusting color tones • Places where the lighting conditions B, then select the desired

change quickly — White Balance setting with v/V.• Under bright lighting such as

Mode switch: / photography studios To reactivate auto adjustment

When the white balance is set to Auto, the WB (Flash) Select [Auto] in step 3. white balance is automatically set and the Adjusts the white balance only to the flash overall color balance is adjusted according conditions (It does not appear when the • Under fluorescent lights that flicker, the white to the shooting conditions. However, when mode switch is set to .) balance adjustment function may not work you shoot under fixed conditions or special correctly even though you select . • When the flash strobes, the manual setting is lighting conditions, you can manually Before operation canceled, and the image is recorded in [Auto] adjust the white balance. When shooting still images, set mode (except in WB mode). (Camera) in the menu to other than [Auto] • The available White Balance settings are Auto (no indicator) limited as follows according to the Adjusts the white balance automatically. (pages 43 and 102). (Camera) setting in the menu: The factory setting is [Auto]. – (Twilight Portrait mode): [Auto] or WB Control button (Flash) only – (Fireworks mode): (Daylight) only (Daylight) MENU Shooting outdoors, shooting night scenes, Mode switch neon signs, fireworks or sunrise, or Shooting techniques shooting just before and after sundown The subject coloring is affected by the lighting conditions. For example, the entire (Cloudy) image appears blue under sunlight in the Shooting under a cloudy sky summer, and white items gain a reddish tint under incandescent light bulbs, etc. The human eye can resolve these problems, but (Fluorescent) digital still cameras cannot recognize the Shooting under fluorescent lighting correct colors without adjustments. a Set the mode switch to or Normally, the camera makes these adjustments automatically, but if recorded . image colors appear unnatural, we recommend that you adjust the white b Press MENU. balance. The menu appears., filename[C:\Documents and Settings\gotanda\Desktop\3085733111DSCT1U2\08adv.fm] masterpage:Right 01cov.book Page 55 Monday, September 29, 2003 11:15 AM a Set the mode switch to .

Adjusting the flash Shooting images

level b Press MENU. continuously The menu appears. — Flash Level c Select (Flash Level) with b/ — Burst Mode switch: B, then select the desired Mode switch: You can adjust the amount of flash light. setting with v/V. This mode is used for continuous shooting. High: Makes the flash level higher Each time you press and hold the shutter

Before operation than normal. button in this mode, the camera records

Normal: Normal setting. Set (Camera) in the menu to other than maximum four images in succession.Low: Makes the flash level lower than [Auto], (Twilight mode) or normal. (Fireworks mode) (pages 43 and 102). Speed priority burst ( S ) The images are shot with a short interval (approx. 0.33 second). During shooting in Control button this mode, the images are not displayed on MENU the LCD screen. Compose the image before pressing the shutter button. Mode switch

Framing priority burst ( F )

Shooting is performed while displaying the images on the LCD screen. The shooting interval (approx. 0.36 second) becomes longer than speed priority burst. • When a “Memory Stick Duo” becomes full, shooting stops even if you continue to hold down the shutter button. Advanced still image shooting, filename[C:\Documents and Settings\gotanda\Desktop\3085733111DSCT1U2\08adv.fm] masterpage:Left 01cov.book Page 56 Monday, September 29, 2003 11:15 AM

Before operation d Shoot the image.

Set (Camera) in the menu to other than You can also shoot only two or three Shooting in Multi (Magnifying glass mode), images by releasing the shutter button Burst mode (Twilight mode), (Twilight portrait partway. mode) or (Fireworks mode) (pages 43 When the message “Recording” — Multi Burst and 102). disappears, you can shoot the next image. Mode switch: Control button This mode records 16 frames in succession MENU To return to normal mode each time you press the shutter button. This Select [Normal] in step 3. is convenient for checking your form in Mode switch sports, for example. • You cannot use the flash in this mode. • When recording with the self timer, a series of Before operation four images are recorded each time you press Set (Camera) in the menu to other than the shutter button. (Magnifying glass mode), (Twilight mode), (Twilight portrait mode) or (Fireworks mode) (pages 43 and 102). a Set the mode switch to . Control button b Press MENU. MENU The menu appears. Mode switch c Select [Mode] (REC Mode) with b/B, then select from [Speed

Burst] or [Framing Burst] with

v/V. a Set the mode switch to . b Press MENU. The menu appears., filename[C:\Documents and Settings\gotanda\Desktop\3085733111DSCT1U2\08adv.fm] masterpage:Right 01cov.book Page 57 Monday, September 29, 2003 11:15 AM c Select [Mode] (REC Mode) with d Shoot the image. b/B, then select [Multi Burst] Shooting still images When the message “Recording” with v/V. for e-mail disappears, you can shoot the next image. d Select M (Interval) with b/B, — E-Mail then select the desired frame Mode switch: To return to normal mode interval with v/V. Select [Normal] in step 3. In E-mail mode, a small-size image You can choose the frame interval (320×240) that is suitable for e-mail from [1/7.5], [1/15] or [1/30]. • For instructions on how to attach images to an transmission is also recorded at the same e-mail message, consult the User’s Manual for time as recording a normal still image. (See your e-mail software. page 20 for the normal still image sizes.) • For the number of images you can record in 1/7.5 E-mail mode, see page 100. 1/15 1/30 Control button1/30 Interval MENU Mode BRK M PFX Mode switch e Shoot the image. A continuous burst of 16 frames are recorded within a single still image (image size 1M). • You cannot use the following functions in Multi Burst mode: – Smart zoom – Flash a Set the mode switch to . – Inserting the date and time • When (Camera) in the menu is set to b Press MENU. [Auto], the frame interval is fixed to [1/30]. • See page 64 to play back Multi Burst images The menu appears. using this camera. • For the number of images that can be recorded c Select [Mode] (REC Mode) with in Multi Burst mode, see page 100. b/B, then select [E-Mail] with v/V. Advanced still image shooting, filename[C:\Documents and Settings\gotanda\Desktop\3085733111DSCT1U2\08adv.fm] masterpage:Left 01cov.book Page 58 Monday, September 29, 2003 11:15 AM d Shoot the image.

Shooting still images If you press and release the Adding special effects

with audio files shutter button, sound is recorded for five seconds. — Picture Effect — Voice If you hold down the shutter Mode switch: / button, sound is recorded until you Mode switch: release the shutter button for up to You can digitally process images to obtain In Voice mode, an audio track is also 40 seconds. special effects. recorded at the same time as recording a Solarize normal still image. To return to normal mode The light contrast is clearer and the picture Control button Select [Normal] in step 3. looks like an MENU illustration. • To view images recorded in Voice mode, carry Microphone out the same procedure described in “Viewing Mode switch movies on the LCD screen” (page 71). • Do not touch the microphone during shooting images in this mode. Sepia • For the number of images you can record in The picture is sepia- Voice mode, see page 100. toned like an old photograph. a Set the mode switch to . Neg.Art The color and b Press MENU. brightness of the The menu appears. picture are reversed as in a negative. c Select [Mode] (REC Mode) with b/B, then select [Voice] with v., filename[C:\Documents and Settings\gotanda\Desktop\3085733111DSCT1U2\08adv.fm] masterpage:Right 01cov.book Page 59 Monday, September 29, 2003 11:15 AM

Before operation

When shooting still images, set (Camera) in the menu to other than [Auto] (pages 43 and 102). Control button

MENU

Mode switch a Set the mode switch to or . b Press MENU. The menu appears. c Select [PFX] (P.Effect) with b/ B, then select the desired mode with v/V. d Shoot the image.

To cancel Picture Effects

Select [Off] in step 3. Advanced still image shooting, filename[C:\Documents and Settings\gotanda\Desktop\3085733111DSCT1U2\09adv.fm] masterpage:Left 01cov.book Page 60 Monday, September 29, 2003 11:15 AM

Advanced still image viewing

d Select the desired folder with Single screen

Selecting the folder b/B.

60min and playing back VGA 101 9/9 Select Folder images 102 2/2Folder Name:102MSDCF No. Of Files: 9 Created: — Folder 2004111:05:34AM

OK

Cancel 101-0009 20041110:30PMMode switch: BACK/NEXT VOLUMEBACK/NEXT Select the folder that images you want to Index (nine-image) screen playback are stored. e Select [OK] with v, then press z. Control button

MENU To cancel the selection

Mode switch Select [Cancel] in step 5. SINGLE DISPLAY

When multiple folders are

Index (sixteen-image) screen created in the “Memory Stick

Duo”

When the first or last image in the folder is displayed, the following indicators appear on the LCD screen. a Set the mode switch to . : Moves to the previous folder. : Moves to the next folder. • SINGLE DISPLAY b Press MENU. : Moves to both the previous and next The menu appears. folders. • When no images are stored in the folder, “No file in this folder” appears. c Select (Folder) with b, then • You can play back images from a last-shot one press z. without selecting the folder., filename[C:\Documents and Settings\gotanda\Desktop\3085733111DSCT1U2\09adv.fm] masterpage:Right 01cov.book Page 61 Monday, September 29, 2003 11:15 AM

Enlarging an image e Adjust the image size with Enlarging a portion of — Playback zoom / (playback zoom).

a still image a Set the mode switch to .

Mode switch: b Display the image to be x5.0

You can enlarge a part of an image up to enlarged with b/B. five times the original size. You can also record the magnified image as a new file. c Press (playback zoom) to zoom in on the image. Control button d Select the desired portion of MENU the image with v/V/b/B. / To cancel playback zoom Mode switch Press v Press z. • You cannot use playback zoom for movies and Multi Burst images. Press Press • If you press (playback zoom) while a non- b B enlarged image is displayed, the LCD screen switches to the index screen (page 36). • You can enlarge the images displayed with the Quick Review function (page 24) by performing steps 3 to 5. Press V v: To view more of the top of the image V: To view more of the bottom of the image b: To view more of the left side of the image B: To view more of the right side of the image Advanced still image viewing, filename[C:\Documents and Settings\gotanda\Desktop\3085733111DSCT1U2\09adv.fm] masterpage:Left 01cov.book Page 62 Monday, September 29, 2003 11:15 AM

Recording an enlarged a Set the mode switch to .

image — Trimming Playing back successive images b Press MENU. a Press MENU after playback The menu appears. zoom. — Slide Show c Select (Slide) with b/B, then The menu appears. Mode switch: press z. b Select [Trimming] with B, then You can play back recorded images in Set the following items with v/V/b/B. press z. order. This function is useful for checking Interval your images or for presentations, etc. c Select the image size with / , 3 sec/5 sec/10 sec/30 sec/1 minv V then press z. Control button Image The image is recorded, and the image MENU Folder: Plays back all images in the on the LCD screen returns to the selected folder.Mode switch normal size after recording. All: Plays back all images stored in the “Memory Stick Duo.” • The trimmed image is recorded as the newest Repeat file in the selected recording folder, and the original image is retained. On: Plays back images in a • The quality of trimmed images may deteriorate. continuous loop. • You cannot trim to an image size of 3:2. Off: After all the images have been • You cannot trim images displayed with Quick played back, the slide show Review. ends. d Select [Start] with V/B, then press z. The slide show begins., filename[C:\Documents and Settings\gotanda\Desktop\3085733111DSCT1U2\09adv.fm] masterpage:Right 01cov.book Page 63 Monday, September 29, 2003 11:15 AM

To cancel the slide show setting

Control button Select [Cancel] in step 3. Rotating still images MENU

To stop slide show playback — Rotate Mode switch

Press z, select [Exit] with B, then press z Mode switch: again. You can rotate an image recorded in portrait orientation and display it in landscape

To skip to the next/previous orientation.

image during the slide show Press B (next) or b (previous). • The interval setting time is approximate, and a Set the mode switch to , and may vary according to the playback image size. display the image to rotate. b Press MENU. The menu appears. c Select (Rotate) with b/B, then press z. d Select with v, then rotate the image with b/B. e Select [OK] with v/V, then press z. Advanced still image viewing, filename[C:\Documents and Settings\gotanda\Desktop\3085733111DSCT1U2\09adv.fm] masterpage:Left 01cov.book Page 64 Monday, September 29, 2003 11:15 AM

To cancel rotation Playing back continuously

Select [Cancel] in step 4 or 5, then press Playing back images shot in Multi Burst a Set the mode switch to .z. mode b Select the Multi Burst image • You cannot rotate protected images, movies and with b/B. Multi Burst images. • You may not be able to rotate images shot with Mode switch: The selected Multi Burst image is other cameras. You can play back Multi Burst images played back continuously. • When viewing images on a computer, the continuously or play them back frame by 60min M image rotation information may not be frame. This function is used for checking 101 14/14 reflected depending on the application the image. software. Control button MENU 101-0014 20041110:30PMPAUSE BACK/NEXT VOLUME Mode switch

To pause playback

Press z. To resume playback, press z again. The playback starts from the frame displayed on the LCD screen. • When Multi Burst images are played back on a computer or on a camera without the Multi Burst function, the 16 frames you shot will be displayed at the same time as part of one image. • You cannot cut the Multi Burst image., filename[C:\Documents and Settings\gotanda\Desktop\3085733111DSCT1U2\09adv.fm] masterpage:Right 01cov.book Page 65 Monday, September 29, 2003 11:15 AM

Playing back frame by frame To return to the normal playback

Press z in step 4. The playback starts — Jog playback from the frame displayed on the LCD a Set the mode switch to . screen. b Select the Multi Burst image To delete shot images with b/B. When using this mode, you cannot delete The selected Multi Burst image is only certain frames. When you delete played back continuously. images, all 16 of the frames are deleted at the same time. c Press z when the desired frame is displayed. 1 Display the desired Multi Burst image to delete. “Step” appears. 2 Press (Delete). 60min M 101 14/14 3 Select [Delete], then press z. Step 3/16 All of the frames are deleted. 101-0014 20041110:30PM PLAY FRAME BACK/NEXT VOLUME d Advance the frame with b/B. B: A next frame is displayed. When you keep and press B, the frame advances. b: A previous frame is displayed. When you keep and press b, the frame advances in the reverse direction. Advanced still image viewing, filename[C:\Documents and Settings\gotanda\Desktop\3085733111DSCT1U2\10adv.fm] masterpage:Left 01cov.book Page 66 Monday, September 29, 2003 11:15 AM Still image editing

In single-image mode In index (nine-image/ Protecting images

a Set the mode switch to . sixteen-image) mode — Protect b Display the image you want to a Set the mode switch to , Mode switch: protect with / . then press (Index) tobBdisplay the index (nine-image) This function protects images against c Press MENU. accidental erasure. screen. The menu appears. Press (Index) twice to display a Control button MENU d Select (Protect) with b/B, sixteen-image index screen. then press z. b Press MENU. Mode switch The displayed image is protected. The The menu appears. - (protect) indicator appears on the image. c Select (Protect) with b/B, 60min VGA then press z. 101 2/9 d Select [Select] with b/B, then press z. Protect Exit BACK/NEXT e Select the image you want to protect with v/V/b/B, then • Note that when you format a “Memory Stick e To continue and protect other press z. Duo,” even protected images are deleted and images, select the desired cannot be restored. The green - indicator appears on the image with b/B, then press z. selected image.

To cancel the protection

Press z again in step 4 or 5. The - indicator disappears. SELECT MENU TO NEXT f Repeat step 5 to protect other images., filename[C:\Documents and Settings\gotanda\Desktop\3085733111DSCT1U2\10adv.fm] masterpage:Right 01cov.book Page 67 Monday, September 29, 2003 11:15 AM g Press MENU. a Set the mode switch to .

Changing image size

h Select [OK] with B, then press b Display the image you want to z. — Resize resize with b/B. The - indicator turns white. The Mode switch: c Press MENU. selected images are protected. You can change the image size of a The menu appears.

To exit the Protect function recorded image, and save it as a new file. d Select (Resize) with b/B,

You can resize to the following sizes: Select [Cancel] in step 4 or select [Exit] in 5M, 3M, 1M, VGA then press z. step 8, then press z. The original image is retained even after e Select the desired size with v/ resizing.

To cancel individual protection V, then press z.

Select the image to be unprotected with Control button The resized image is recorded in the / / / , then press in step 5. The - MENUvVbBzrecording folder as the newest file. indicator turns gray. Repeat this operation Mode switch for all images that are to be unprotected. To cancel resizing Press MENU, select [OK], and then press Select [Cancel] in step 5. z. • You cannot change the size of movies or Multi

To protect all images in the Burst images.

• When you change from a small size to a large folder size, the image quality deteriorates. Select [All In This Folder] in step 4, and • You cannot resize to an image size of 3:2. press z. Select [On], then press z. • When you resize a 3:2 image, the upper and lower black portions will be displayed on the image.

To cancel all protection of all

images in the folder Select [All In This Folder] in step 4, and press z. Select [Off], then press z. Still image editing, filename[C:\Documents and Settings\gotanda\Desktop\3085733111DSCT1U2\10adv.fm] masterpage:Left 01cov.book Page 68 Monday, September 29, 2003 11:15 AM • You cannot mark movies. In single-image mode

Choosing images to • In E-mail mode, a print (DPOF) mark is

print marked on the normal size image that is a Set the mode switch to .recorded at the same time. • When you mark images shot in Multi Burst b Display the image you want to — Print (DPOF) mark mode, all the images are printed on one image mark with b/B. Mode switch: divided into 16 frames.• You cannot set the number of prints. c Press MENU. You can use your camera to mark still The menu appears. images that you want to have printed. This function is convenient when you have d Select (DPOF) with b/B, images printed at a shop that supports the then press z. DPOF (Digital Print Order Format) The mark is marked on the standard or using a printer that conforms to displayed image. the DPOF standard. 60min VGA 101 2/9 Control button

MENU DPOF

Exit Mode switch BACK/NEXT e To continue and mark other images, display the desired image with b/B, then press z.

To unmark the mark

Press z again in step 4 or 5. The mark disappears., filename[C:\Documents and Settings\gotanda\Desktop\3085733111DSCT1U2\10adv.fm] masterpage:Right 01cov.book Page 69 Monday, September 29, 2003 11:15 AM

In index (nine-image/ f Repeat step 5 to mark other

sixteen-image) mode images. a Set the mode switch to , g Press MENU. then press (Index) to h Select [OK] with B, then press display the index (nine-image) z. screen. Press (Index) twice to display a The mark turns white. The sixteen-image index screen. mark setting is completed. b Press MENU.

To unmark marks

The menu appears. Select the images to be unmarked with v/ c Select (DPOF) with B, then V/b/B in step 5, then press z. press z. d Select [Select] with / , then To unmark all the marks inbBpress . the folderz Select [All In This Folder] in step 4, then • When marking marks, you cannot select [All In This Folder]. press z. Select [Off], then press z. e Select the image you want to mark with v/V/b/B, then press To exit the mark function Select [Cancel] in step 4, or select [Exit] z. in step 8. The green mark appears on the selected image. SELECT MENU TO NEXT Still image editing, filename[C:\Documents and Settings\gotanda\Desktop\3085733111DSCT1U2\11adv.fm] masterpage:Left 01cov.book Page 70 Monday, September 29, 2003 11:15 AM

Enjoying movies

c Select the desired size with v/ Shooting close-ups (Macro)

Shooting movies V. Set the mode switch to and follow the Mode switch: You can choose from [640(Fine)],

procedure on page 27. [640(Standard)] and [160]. You can shoot movies with sound using • [640(Fine)] can be recorded only on Using the self-timer your camera. “Memory Stick PRO Duo.” Set the mode switch to and follow the d Press the shutter button fully procedure on page 28. Control button down. • Do not touch the microphone during shooting Microphone “REC” appears on the LCD screen and movies. Shutter button the camera starts recording the image • You cannot use the following functions during and sound. Mode switch shooting movies: 60min STD640101 – Changing the zoom scale REC 00:00:02(00:10:48) – Flash – Inserting the date and time • When you set the image size to [640(Fine)] while connecting the A/V connecting cable to A/V OUT (MONO) jack, the subject does not appear on the LCD screen. The LCD screen Recording stops when the “Memory turns blue. Stick Duo” is full. • For the recording time in each movie mode, see page 101. e Press the shutter button fully down again to stop recording. a Set the mode switch to . b Press (Image Size). Indicators during shooting The Image Size setup appears. The screen indicators are not recorded. Each time you press , the status of the LCD screen changes as follows: Indicators off t LCD backlight off t Indicators on. A histogram is not displayed. For a detailed description of the indicators, see page 115., filename[C:\Documents and Settings\gotanda\Desktop\3085733111DSCT1U2\11adv.fm] masterpage:Right 01cov.book Page 71 Monday, September 29, 2003 11:15 AM a Set the mode switch to . To advance or rewind the movie

Viewing movies on Press b/B during playback.

the LCD screen b Select the desired movie with To return to the normal playback, press z. b/B.

Mode switch: Movies with the image size Indicators during viewing

[640(Fine)] or [640(Standard)] are You can view movies on the LCD screen moviesdisplayed on the full screen. with sound from the speaker. Each time you press , the status of the 60min STD640101 10/10 screen changes as follows: Indicators off 00:00:00 Control button t LCD backlight off t Indicators on. Speaker A histogram is not displayed. For a detailed description of the indicators, Mode switch 101_0010 20041110:30PM PLAY BACK/NEXT VOLUME see page 117. Movies with the image size [160] are displayed a size smaller. • The procedure for viewing movies on a TV is the same as that for viewing still images c Press z. (page 37). The movie and sound are played back. • The movies recorded using earlier Sony models During playback, (Playback) may be also displayed a size smaller.B appears on the LCD screen. 60min STD640101 10/10 00:00:03 101_0010 20041110:30 Playback barPM STOP REV/CUE VOLUME

To stop playback

Press z again.

To adjust the volume

Press v/V to adjust the volume. Enjoying movies, filename[C:\Documents and Settings\gotanda\Desktop\3085733111DSCT1U2\11adv.fm] masterpage:Left 01cov.book Page 72 Monday, September 29, 2003 11:15 AM

In single-image mode In index (nine-image/ Deleting movies

Set the mode switch to . sixteen-image) modea Mode switch: b Display the movie you want to a Set the mode switch to , You can delete unwanted movies. delete with / . then press (Index) tobBdisplay an index (nine-image) Control button c Press (Delete). screen. The movie has not yet been deleted at Press (Index) twice to display a this point. sixteen-image index screen. Mode switch d Select [Delete] with v, then b Press (Delete). press z. The movie has not yet been deleted at The message “Access” appears, and this point. the movie has been deleted. c Select [Select] with b/B, then e To continue and delete other press z. movies, display the movie you want to delete with / , and d Select the movie you want tobBrepeat step . delete with v/V/b/B, then 4 • You cannot delete protected movies. press z. • Note that you cannot restore deleted movies.

To cancel deletion The green (Delete) indicator

Select [Exit] in step 4 or 5. appears on the selected movie. SELECT TO NEXT The movie has not yet been deleted at this point. e Repeat step 4 to delete other movies., filename[C:\Documents and Settings\gotanda\Desktop\3085733111DSCT1U2\11adv.fm] masterpage:Right 01cov.book Page 73 Monday, September 29, 2003 11:15 AM f Press (Delete). Cutting a movie numbered

Editing movies 101_0002

g Select [OK] with B, then press 101_0001 101_0003 z. Mode switch: The message “Access” appears, and You can cut movies, or delete unnecessary123the movies have been deleted. portions of movies. This is the recommended mode to use when the 101_0002

To cancel deletion “Memory Stick Duo” capacity is 1. Cutting scene A.

Select [Exit] in step 3 or 7. insufficient, or when you attach movies to1A2B3your e-mail messages.

To delete all images in the folder

Divide point 101_0002 Select [All In This Folder] in step 3, then The file numbers assigned when 2. Cutting scene B. press z. Select [OK] with B, then press z. movies are cut 101_0004 To cancel deletion, select [Cancel] with b, The cut movies are assigned new numbers then press z. and recorded as the newest files in the13A2Bselected recording folder. The original movie is deleted, and that number is 101_0005 Divide skipped. point 3. Deleting scenes A and B if they are Control button unnecessary. MENU 101_0004 101_0007 Mode switch13A2B101_0006 Delete Delete 4. Only the desired scenes remain. 132101_0006 Enjoying movies, filename[C:\Documents and Settings\gotanda\Desktop\3085733111DSCT1U2\11adv.fm] masterpage:Left 01cov.book Page 74 Monday, September 29, 2003 11:15 AM

Cutting movies g Select [OK] with v, then press Deleting unnecessary

a Set the mode switch to . z. portions of movies The movie is cut. b Select the movie you want to a Cut an unnecessary portion of cut with / . To cancel cutting a movie (page 74).b B Select [Exit] in step 5 or 7. The movie

Press MENU. b Display the portion of the c appears on the LCD screen again. movie you want to delete.

The menu appears. d Select (Divide) with • You cannot cut the following images. c Press (Delete).B, then – Still images press z. Next, select [OK] with The movie has not yet been deleted at – Movie files not long enough to cut this point. v, then press z. – Protected movie files The playback of the movie starts. • You cannot restore files once you cut them. d Select [Delete] with v, then • The original movie is deleted when you cut it. press z. e Decide on a cutting point. • The cut movies are recorded as the newest files in the selected recording folder. The movie currently displayed on the Press z at the desired cutting point. LCD screen is deleted. 60min STD640101 10/10 Divide 00:00:02 • Note that you cannot restore deleted portions of Dividing Point movies. O K Cancel Exit When you want to adjust the cutting point, use [c/C] (frame forward/ rewind) and adjust the cutting point using b/B. If you want to change the cutting point, select [Cancel]. The playback of the movie starts again. f When you have decided on a cutting point, select [OK] with v/V, and press z., filename[C:\Documents and Settings\gotanda\Desktop\3085733111DSCT1U2\12adv.fm] masterpage:Right 01cov.book Page 75 Monday, September 29, 2003 11:15 AM

Enjoying images on your computer

• Operations are not guaranteed when using a Contents of the CD-ROM

Copying images to USB hub.

your computer • Operations are not guaranteed for all the x USB Driverrecommended computer environments This driver is needed in order to connect the — For Windows users mentioned above. camera to a computer. • When using Windows XP, you need not install

Recommended computer USB mode the USB driver.

environment There are two modes for connecting toaxImage Transfer computer, [Normal] and [PTP]* modes. OS: Microsoft Windows 98, Windows This application is used to easily transfer The factory setting is the [Normal] mode. 98SE, Windows 2000 Professional, images from the camera to a computer. This section describes the [Normal] mode Windows Millennium Edition, Windows as an example. x ImageMixer XP Home Edition or Windows XP This application is used to display and edit Professional * Compatible only with Windows XP. When The above OS must be installed at the connected to a computer, only the data in the images that are stored in a computer. folder selected by the camera is copied to the factory. Operation is not assured in an computer. To select a folder, perform the • The required operations may differ depending environment upgraded to the operating procedure on page 60. on your OS. systems described above or in a multi-boot • Close down all applications running on environment. Communication with your the computer before installing the USB CPU: MMX Pentium 200 MHz or faster driver and application.computer • When using Windows XP or Windows 2000, USB connector: Provided as standard When your computer resumes from the log on as Administrators. Display: 800 × 600 dots or more suspend or sleep mode, communication • The display settings should be 800 × 600 dots High Color (16-bit color, 65,000 colors) or between your camera and your computer or more and High Color (16-bit color, 65,000 more colors) or more. When set to less than 800 × may not recover at the same time. 600 dots or 256 colors or less, the model • This camera conforms to USB 2.0. selection screen does not appear. • Use with a USB 2.0 (High-Speed USB) When a USB connector is not compatible computer environment allows high- provided on your computer speed data transfer. When neither a USB connector nor a • If you connect two or more USB equipment to “Memory Stick” slot is provided, you can a single computer at the same time, some equipment, including your camera, may not copy images using an additional device. See operate depending on the type of USB the Sony Website for details. equipment. http://www.sony.net/ Enjoying images on your computer, filename[C:\Documents and Settings\gotanda\Desktop\3085733111DSCT1U2\12adv.fm] masterpage:Left 01cov.book Page 76 Monday, September 29, 2003 11:15 AM

Installing the USB driver c Click [USB Driver] on the e Click [Yes, I want to restart my

installing menu screen. computer now], then click When using Windows XP, you need not install the USB driver. [Finish]. Once the USB driver is installed, you need not install the USB driver again. a Start up your computer, and insert the CD-ROM (supplied) into the CD-ROM drive. Do not connect your camera to your computer at this time. The “InstallShield Wizard” screen appears. Your computer restarts. Then, you can The model selection screen appears. If establish USB connection. d Click [Next]. When the it does not appear, double-click (My Computer) t (ImageMixer) “Information” screen appears, in that order. click [Next]. b Click [Cyber-shot] on the model selection screen. The installing menu screen appears. The USB driver installation starts. When the installation is completed, the screen informs you of completion., filename[C:\Documents and Settings\gotanda\Desktop\3085733111DSCT1U2\12adv.fm] masterpage:Right 01cov.book Page 77 Monday, September 29, 2003 11:15 AM

Installing “Image Transfer” c Click [Next]. When “Licence e Select the folder to be

Agreement” screen appears, installed, then click [Next]. You can use the “Image Transfer” software to copy images to your computer click [Yes]. Select the program folder, then automatically when you connect the camera click [Next]. to your computer with the supplied USB cable. a Click [Cyber-shot] on the model selection screen. Read the agreement carefully. If you The installing menu screen appears. accept the terms of the agreement, f Confirm if the checkbox is proceed with the installation. The b Click [Image Transfer] on the “Information” screen appears. checked on the “Image installing menu screen. Transfer Settings” screen, d Click [Next]. Select the desired language, then click [Next]. then click [OK]. When the installation is completed, the screen informs you of completion. The “Welcome to the InstallShield Wizard for Image Transfer” screen appears. • This section describes the English screen. 77 Enjoying images on your computer, filename[C:\Documents and Settings\gotanda\Desktop\3085733111DSCT1U2\12adv.fm] masterpage:Left 01cov.book Page 78 Monday, September 29, 2003 11:15 AM g Click [Finish]. Installing “ImageMixer” • When you use Windows 2000 or Windows XP, install “WinASPI”. You can use the “ImageMixer Ver. 1.5 for • If DirectX8.0a or a later version is not installed Sony” software to copy, view and edit in your computer, the “Information” screen images, and create video CDs. For details, appears. Follow the procedure on the screen. see the software’s help files. c Restart your computer a Click [ImageMixer] on the according to the screen. installing menu screen. d Remove the CD-ROM.

Select the desired language,

The “InstallShield Wizard” screen then click [OK]. closes. If you wish to continue with the installation of “ImageMixer,” click [ImageMixer] on the installing menu screen and then follow the procedure. • The USB driver is needed in order to use “Image Transfer.” If the necessary driver is not already installed on your computer, a screen that asks if you want to install the driver will appear. Follow the instructions that appear on the screen. The “Welcome to the InstallShield Wizard” screen appears. • This section describes the English screen. b Follow instructions on each succeeding screen. Install “ImageMixer” according to the screen., filename[C:\Documents and Settings\gotanda\Desktop\3085733111DSCT1U2\12adv.fm] masterpage:Right 01cov.book Page 79 Monday, September 29, 2003 11:15 AM

Connecting the camera to d Connect the USB cable to the f Connect the camera to the

your computer (USB) jack of the USB USB cradle and turn on the a Turn on your computer. cradle. camera.

POWER

b Insert the “Memory Stick Duo” with the images you want to copy into the camera. • For further details on the “Memory Stick Duo,” see page 19. c Connect the USB cradle USB cable (supplied) and the AC Adaptor • Make sure the camera is securely connected to (supplied), and plug the the USB cradle. adaptor into a wall outlet (wall e Connect the USB cable to your socket). computer. USB Mode Normal AC Adaptor Access To a wall outlet indicators* USB cradle (wall socket) “USB Mode Normal” appears on the 2 LCD screen of the camera. When a USB connection is established for the first time, your computer automatically runs the used program to recognize the 1 camera. Wait for a while. * During communication, the access indicators turn red. • When you use a desktop computer, we • When you copy images to your computer using • If “USB Mode Normal” does not appear in step recommend that you connect the USB cable to the battery pack, copying may be failed or 6, confirm that [USB Connect] is set to the USB connector on the rear panel. cause data corruption by battery shutoff. We [Normal] on the Setup screen (page 107).• When using Windows XP, the AutoPlay wizard recommend that you use the AC Adaptor. • Do not remove the camera from the USB automatically appears on the desktop. Proceed cradle during USB connection, as the to page 82. image data may be destroyed. To end the USB connection, see the note P on page 80. Enjoying images on your computer, filename[C:\Documents and Settings\gotanda\Desktop\3085733111DSCT1U2\12adv.fm] masterpage:Left 01cov.book Page 80 Monday, September 29, 2003 11:15 AM

P Disconnecting the USB Copying images using — Windows XP

cable from your computer, “Image Transfer” Connect the camera and your removing the “Memory Stick — Windows 98/98SE/2000/Me computer with the USB cable and

Duo” from your camera or the USB cradle.

turning off the power during Connect the camera and your “Image Transfer” starts up automatically computer with the USB cable and and the images are automatically copied to

USB connection the USB cradle. the computer.

“Image Transfer” launches and the images Windows XP is set so that the OS AutoPlay For Windows 2000, Me or XP users are automatically copied to the computer. Wizard activates. 1 Double-click on the tasktray. When copying is complete, “ImageMixer” If you want to cancel the setting, follow the automatically launches and images appear. procedure below. a Click [Start], then click [My Computer]. Double-click here b Right-click [Sony 2 Click (Sony DSC), then click [Stop]. MemoryStick], then click 3 Confirm the device on the confirmation [Properties]. screen, then click [OK]. c Cancel the setting. 4 Click [OK]. 1Click [AutoPlay]. Step 4 is unnecessary for Windows XP 2 Set [Content type] to [Pictures]. users. 3Check [Select an action to perform] 5 Disconnect the USB cable, remove the • Normally “Image Transfer” and “Date” folders under [Actions], select [Take no are created inside the “My Documents” folder, “Memory Stick Duo” or turn off the action], then click [Apply].and all of the image files recorded with the power. camera are copied into these folders. 4 Set [Content type] to [Video files] • You can change the “Image Transfer” settings and proceed step 3. Set [Content For Windows 98 or 98SE users (page 81). type] to [Mixed content] and Confirm that the access indicators (page 79) proceed step 3. on the LCD screen are turned white and 5Click [OK]. carry out only step 5 above. The [Properties] screen closes. The OS AutoPlay Wizard does not start up automatically even if the USB connection is made next time., filename[C:\Documents and Settings\gotanda\Desktop\3085733111DSCT1U2\12adv.fm] masterpage:Right 01cov.book Page 81 Monday, September 29, 2003 11:15 AM

Changing “Image Transfer” Copying images without When an image with the same

settings using “Image Transfer” file name exists in the copy destination folder You can change “Image Transfer” settings. — Windows 98/98SE/2000/Me The overwrite confirmation message Right-click the “Image Transfer” icon on If you do not set to launch “Image Transfer” appears. When you overwrite the existing the tasktray, select [Open Settings]. The automatically, you can copy images as image with the new one, the original file settings you can set are as follows: [Basic], following procedure. data is deleted. [Copy], and [Delete]. a Double-click [My Computer], then double-click [Removable To change the file name To copy an image file to the computer Disk]. without overwriting, change the file name Right-click here The contents of the “Memory Stick to the desired name. However, note that if Duo” inserted in your camera appear. you change the file name, you may not be When the “Image Transfer” starts, the able to play back that image with your below window appears. • This section describes an example of copying camera. To play back images with the images to the “My Documents” folder. • When the “Removable Disk” icon is not shown, camera, perform the operation on page 85. see page 82. • When using Windows XP, see page 82. b Double-click [DCIM], then double-click the folder which contains the desired images. The folder opens. c Right-click the image, then When you select [Settings] from the above click [Copy]. window, you can only change the [Basic] d Double-click the “My setting. Documents” folder. Right-click the inside of the folder, then click [Paste]. The image files are copied to the “My Documents” folder. Enjoying images on your computer, filename[C:\Documents and Settings\gotanda\Desktop\3085733111DSCT1U2\12adv.fm] masterpage:Left 01cov.book Page 82 Monday, September 29, 2003 11:15 AM When a removable disk icon is not — Windows XP e Select [Nothing. I’m finished shown Copying images using the working with these pictures], 1 Right-click [My Computer], then click Windows XP AutoPlay Wizard then click [Next]. [Properties]. The “Completing the Scanner and The “System Properties” screen appears. a Make a USB connection Camera Wizard” screen appears. (page 79). Click [Copy pictures 2 Display [Device Manager]. to a folder on my computer f Click [Finish]. 1Click [Hardware]. using Microsoft Scanner and The wizard closes.2Click [Device Manager]. • When using Windows 98, 98SE or Me, skip Camera Wizard], then click • To continue copying other images, follow the step 1. Click [Device Manager] tab. [OK]. procedure given under P on page 80 to 3 Delete “ Sony DSC” if it appears. The “Scanner and Camera Wizard” disconnect the USB cable and reconnect it. 1Right-click [ Sony DSC]. screen appears. Then, perform the procedure from step 1 2Click [Uninstall]. (When using again.b Click [Next]. Windows 98, 98SE or Me, click The images stored on the “Memory [Remove].) Stick Duo” are displayed. The “Confirm Device Removal” screen appears. c Click the checkbox of images 3Click [OK]. that you do not want to copy to The device is deleted. your computer and remove the checkmark, then click [Next]. Try the USB driver installation again using The “Picture Name and Destination” the CD-ROM (supplied) (page 76). screen appears. d Select a name and destination for your pictures, then click [Next]. Image copying starts. When the copying is completed, the “Other Options” screen appears., filename[C:\Documents and Settings\gotanda\Desktop\3085733111DSCT1U2\12adv.fm] masterpage:Right 01cov.book Page 83 Monday, September 29, 2003 11:15 AM

Viewing images on your Image file storage

computer destinations and file names a Click [Start] t [My Image files recorded with your camera are

Documents] in that order. grouped as folders in the “Memory Stick

Duo.” The “My Documents” folder contents are displayed. Example: For Windows XP users • This section describes the procedure for viewing copied images in the “My Documents” folder. • Except for Windows XP, double-click [My Documents] on the desktop. • You can use the “ImageMixer Ver. 1.5 for Sony” software to view and edit images on your computer. For details, see the software’s help files. Folder containing image data recorded using a camera without the folder creation function b Double-click the desired image file. Folder containing image data recorded with this The image is displayed. camera When no new folders have been created, this is only “101MSDCF” Folder containing E-mail mode image data, movie data and Voice mode audio data recorded using a camera without the folder creation function • Data in the “100MSDCF” or “MSSONY” folders is for playback only, and your camera cannot record images in these folders. • For more information about the folder, see page 45. Enjoying images on your computer, filename[C:\Documents and Settings\gotanda\Desktop\3085733111DSCT1U2\12adv.fm] masterpage:Left 01cov.book Page 84 Monday, September 29, 2003 11:15 AM Folder File name File meaning 101MSDCF up to DSC0ssss.JPG • Still image files shot in 999MSDCF – Normal mode – Exposure Bracket mode (page 52) – Burst mode (page 55) – Multi Burst mode (page 56) • Still image files recorded simultaneously in – E-Mail mode (page 57) – Voice mode (page 58) DSC0ssss.JPE • Small-size image files shot in E-Mail mode (page 57) DSC0ssss.MPG • Audio files shot in Voice mode (page 58) MOV0ssss.MPG • Movie files (page 70) MOV0ssss.THM • Index image file recorded simultaneously in movie mode (page 70) • ssss stands for any number within the range from 0001 to 9999. • The numerical portions of the following files are the same. – A small-size image file shot in E-Mail mode and its corresponding image file – An audio file shot in Voice mode and its corresponding image file – A movie file shot in movie mode and its corresponding index image file, filename[C:\Documents and Settings\gotanda\Desktop\3085733111DSCT1U2\12adv.fm] masterpage:Right 01cov.book Page 85 Monday, September 29, 2003 11:15 AM

Viewing image files once b Copy the file to the “Memory

copied to a computer with Stick Duo” folder. your camera 1Right-click the image file, then click [Copy]. When an image file copied to a computer no 2 Select the “DCIM” folder within longer remains in a “Memory Stick Duo,” the [Removable Disk] or [Sony you can view that image again on your MemoryStick] from [My camera by copying the image file in the Computer]. computer to a “Memory Stick Duo.” 3Right-click the [sssMSDCF] folder in the “DCIM” folder and • Step 1 is not necessary when the file name set click [Paste]. sss is a number with your camera has not been changed. from 100 to 999. • You may be unable to play back some images depending on the image size. • When the overwrite confirmation message • When an image file has been processed by a appears, enter a different number in step 1. computer or when the image file was recorded • When there is no folder, first create a folder using a model other than your camera, playback with your camera and then copy the image file on your camera is not guaranteed. (page 45). a Right-click the image file, then click [Rename].

Change the file name to

“DSC0ssss.” Enter a number from 0001 to 9999 for ssss. • An extension may be displayed depending on the computer settings. The extension for still images is JPG, and the extension for moving images is MPG. Do not change the extension. Enjoying images on your computer, filename[C:\Documents and Settings\gotanda\Desktop\3085733111DSCT1U2\12adv.fm] masterpage:Left 01cov.book Page 86 Monday, September 29, 2003 11:15 AM

USB mode a Connecting your camera to Copying images to There are two modes for connecting to a your computer

your computer computer, [Normal] and [PTP]* modes. For details, see page 79. — For Macintosh users The factory setting is the [Normal] mode. This section describes the [Normal] mode Disconnecting the USB cable from your as an example. computer, removing the “Memory Stick

Recommended computer

* Compatible only with Mac OS X. When Duo” from your camera or turning off environment connected to a computer, only the data in the the power during a USB connection OS: Mac OS 9.1, 9.2 or Mac OS X (v10.0/ folder selected by the camera is copied to the Drag and drop the drive icon or the v10.1/v10.2) computer. To select a folder, perform the “Memory Stick” icon to the “Trash” icon, The above OS must be installed at the procedure on page 60. then remove the USB cable or “Memory factory. USB connector: Provided as standard Communication with your Stick Duo” or turn off the power. computer • If you are using Mac OS X v10.0, remove the Display: 800 × 600 dots or more USB cable, etc., after you have turned your 32,000-color mode or more When your computer resumes from the computer off. suspend or sleep mode, communication • If you connect two or more USB equipment to between your camera and your computer b Copying images a single computer at the same time, some may not recover at the same time. 1 Double-click the newly recognized icon equipment, including your camera, may not operate depending on the type of USB When a USB connector is not on the desktop. equipment. provided on your computer The contents of the “Memory Stick • Operations are not guaranteed when using a Duo” inserted in your camera appear. USB hub. When neither a USB connector nora2Double-click [DCIM]. • Operations are not guaranteed for all the “Memory Stick” slot is provided, you can recommended computer environments copy images using an additional device. See 3 Double-click the folder containing the mentioned above. the Sony Website for details. desired image file. http://www.sony.net/ 4 Drag and drop the image files to the hard disk icon. The image files are copied to your hard disk. • See pages 83 and 84 for details about the image file storage destinations and file names., filename[C:\Documents and Settings\gotanda\Desktop\3085733111DSCT1U2\12adv.fm] masterpage:Right 01cov.book Page 87 Monday, September 29, 2003 11:15 AM c Viewing the images on your For Mac OS X users computer If the “There is no application available to open the document “DSC0ssss.JPE”.” 1 Double-click the hard disk icon. screen appears when you click an E-mail 2 Double-click the desired image file in mode image file, make the following the folder containing the copied files. setting. The image file opens. The screen display may differ depending on the version. • Close down all applications running on the computer before installing the 1 Click [Choose Application...] at the application. “There is no application available to • You can use the “ImageMixer Ver. 1.5 for open the document Sony” software to copy, view and edit images, and create video CDs. See the operation manual “DSC0ssss.JPE”.” screen. supplied with the CD-ROM for details about 2 Change “Show” from [Recommended the installation method, or see the software’s Applications] to [All Applications]. help files for the operation method. • When images cannot be displayed, increase the 3 Select [QuickTime Player] from the virtual memory capacity of the computer. displayed list of applications, and click • “ImageMixer” is not compatible with Mac OS [Open]. X. • “Image Transfer” cannot be used with Macintosh. Enjoying images on your computer, filename[C:\Documents and Settings\gotanda\Desktop\3085733111DSCT1U2\13trb.fm] masterpage:Left 01cov.book Page 88 Monday, September 29, 2003 11:15 AM Troubleshooting 2 Should your camera still not work 3 Should your camera still not work

Troubleshooting properly, press the RESET button on the properly, consult your Sony dealer or

lower right side of the control button local authorized Sony service facility. If you experience trouble with your camera, using a fine-tipped object, then turn on try the following solutions. the power again. (All the settings 1 First check the items on the tables below. including date and time are cleared.) If code displays “C:ss:ss” appear on the LCD screen, the self-diagnosis display function is RESET button working (page 99).

Battery pack and power

Symptom Cause Solution You cannot charge the • The camera is turned on. p Turn the camera off (page 16). battery pack. • The battery pack is not installed correctly. p Install the battery pack correctly (page 11). The /CHG lamp flashes • The battery pack is not installed correctly. p Install the battery pack correctly (page 11). when charging a battery • The battery pack has malfunctioned. p Consult your Sony dealer or local authorized Sony service pack. facility. The /CHG lamp does not • The AC Adaptor is disconnected. p Properly connect the AC Adaptor (page 11). light up when charging a • The AC Adaptor has malfunctioned. p Consult your Sony dealer or local authorized Sony service battery pack. facility. • The battery pack is not installed correctly. p Install the battery pack correctly (page 11). • The battery pack is completely charged. — • The camera is not properly installed to the USB p Properly install the camera (page 10). cradle., filename[C:\Documents and Settings\gotanda\Desktop\3085733111DSCT1U2\13trb.fm] masterpage:Right 01cov.book Page 89 Monday, September 29, 2003 11:15 AM Symptom Cause Solution The battery remaining • You have used the camera for a long time in an p See page 111. indicator is incorrect, or extremely hot or an extremely cold location. sufficient battery • A deviation has occurred in the remaining p Fully discharge and then charge the battery pack so that the remaining indicator is battery time. battery remaining indicator functions correctly (page 13). displayed but the power • The battery pack is discharged. p Install a charged battery pack (page 11). runs out soon. • The battery pack is dead (page 111). p Replace the battery pack with a new one. The battery pack runs • You are shooting/viewing images in an — down too quickly. extremely cold location. • The battery terminal is dirty. p Clean the battery terminal with a cotton swab, etc., and charge the battery pack. • The battery pack is dead (page 111). p Replace the battery pack with a new one. You cannot turn on the • The battery pack is not installed correctly. p Install the battery pack correctly (page 11). camera. • The AC Adaptor is disconnected. p Properly connect the AC Adaptor (page 15). • The AC Adaptor has malfunctioned. p Consult your Sony dealer or local authorized Sony service facility. • The battery pack is discharged. p Install a charged battery pack (page 11). • The battery pack is dead (page 111). p Replace the battery pack with a new one. • The camera is not properly installed to the USB p Properly install the camera (page 10). cradle. The power turns off • If you do not operate the camera for about three p Turn on the camera again (page 16) or use the AC Adaptor suddenly. minutes when using a battery pack, the camera (page 15). turns off automatically to prevent wearing down the battery (page 16). • The battery pack is discharged. p Install a charged battery pack (page 11). • The camera is not properly installed to the USB p Properly install the camera (page 10). cradle.

Shooting still images/movies

Symptom Cause Solution The LCD screen is not • The LCD backlight is turned off with in the p Turn on the LCD backlight with (page 25). turned on even when the dark place. power is turned on. The subject is not visible • The mode switch is not set to or . p Set it to or (pages 22 and 70). on the LCD screen. Troubleshooting, filename[C:\Documents and Settings\gotanda\Desktop\3085733111DSCT1U2\13trb.fm] masterpage:Left 01cov.book Page 90 Monday, September 29, 2003 11:15 AM Symptom Cause Solution The LCD screen turns • The image size is set to [640(Fine)] while an A/ p Disconnect the A/V connecting cable. blue and the subject does V connecting cable is connected to the A/V OUT p Set the image size to other than [640(Fine)]. not appear when (MONO) jack. recording movies. The image is out of focus. • The subject is too close. p Use close-up (Macro) function and set the lens position father away from the subject than the shortest shooting distance (page 27). Or, set (Camera) in the menu to (Magnifying glass mode) and focus within the range of 1 cm to 20 cm (13/32 inch to 7 7/8 inches) from the subject (page 32). • When shooting still images, (Camera) in the p Set it to other settings (page 32). menu is set to (Magnifying glass mode), (Twilight mode), (Landscape mode) or (Fireworks mode). • The focus preset function is selected. p Cancel the function (page 49). Zoom does not function. • You cannot change the zoom scale when — shooting movies. Optical zoom does not • When shooting still images, (Camera) in the p Set it to other settings (page 32). function. menu is set to (Magnifying glass mode). Digital zoom does not • [Digital Zoom] is set to [Off] on the Setup p Set [Digital Zoom] to [Smart] or [Precision] (pages 44 and 106). function. screen. • The image size is set to [5M] or [3:2] (only when p Set image size to other settings except [5M] and [3:2] (page 20). using the smart zoom). • You are shooting in Multi Burst mode (only p Set [Digital Zoom] to [Precision] (pages 44 and 106). when using the smart zoom). The image is too dark. • You are shooting a subject with a light source p Adjust the exposure (page 50). behind the subject. • The brightness of the LCD screen is too low. p Adjust the brightness of the LCD screen (pages 44 and 107). • The LCD backlight is turned off. p Turn on the LCD backlight with (page 25). The image is too bright. • You are shooting a spotlighted subject in a dark p Adjust the exposure (page 50). location such as on a stage. • The brightness of the LCD screen is too bright. p Adjust the brightness of the LCD screen (pages 44 and 107). Vertical streaks appear • The smear phenomenon is occurring. p This is not a malfunction. when you are shooting a very bright subject., filename[C:\Documents and Settings\gotanda\Desktop\3085733111DSCT1U2\13trb.fm] masterpage:Right 01cov.book Page 91 Monday, September 29, 2003 11:15 AM Symptom Cause Solution Noise appears in the • The camera is functioning to increase the p There is no effect on the recorded image. image when you view the visibility of the LCD screen by temporarily LCD screen in a dark brightening the image under conditions of low place. illumination. Your camera cannot • No “Memory Stick Duo” has been inserted. p Insert a “Memory Stick Duo” (page 19). record images. • The “Memory Stick Duo” is full. p Delete unnecessary images (pages 39 and 72). p Change the “Memory Stick Duo.” • You are using a “Memory Stick Duo” withapSet it to the recording position (page 109). write-protect switch, and the write-protect switch is set to the LOCK position. • You cannot record images while charging the — flash. • The mode switch is not set to when shooting p Set it to (page 22). a still image. • The mode switch is not set to when shooting p Set it to (page 70). a movie. • The image size is set to [640(Fine)] when p Insert a “Memory Stick PRO Duo” (pages 70 and 109). recording movies. p Set the image size to other than [640(Fine)]. The flash does not work. • The mode switch is not set to . p Set it to (page 22). • The flash is set to (No flash). p Set the flash to auto (No indicator), (Forced flash) or SL (Slow synchro) (page 29). • When shooting still images, (Camera) in the p Set it to other settings (page 32). menu is set to (Twilight mode) or (Fireworks mode). • (Camera) in the menu is set to p Set the flash to (Forced flash) (page 29). (Magnifying glass mode), (Landscape mode), (Snow mode), (Beach mode) or (High-speed shutter mode). • [Mode] (REC Mode) in the menu is set to [Multi p Set it to other settings. Burst], [Exp Brktg], [Speed Burst] or [Framing Burst]. The close-ups (Macro) • When shooting still images, (Camera) in the p Set it to other settings (page 32). function does not work. menu is set to (Magnifying glass mode), (Twilight mode), (Landscape mode) or (Fireworks mode). Troubleshooting, filename[C:\Documents and Settings\gotanda\Desktop\3085733111DSCT1U2\13trb.fm] masterpage:Left 01cov.book Page 92 Monday, September 29, 2003 11:15 AM Symptom Cause Solution The eyes of the subject — p Set [Red Eye Reduction] on the Setup screen to [On] (pages 29 come out red. and 106). The date and time are • The date and time are not set correctly. p Set the correct date and time (pages 17 and 107). recorded incorrectly. The F value and shutter • The exposure is incorrect. p Correct the exposure (page 50). speed flash when you press and hold the shutter button halfway down.

Viewing images

Symptom Cause Solution Your camera cannot play • The mode switch is not set to . p Set it to (page 35). back images. • The folder/file name has been changed on your p See page 85. computer. • Your camera cannot play back image files — copied from the hard disk of your computer if the image has been modified. • The camera is set to USB mode. p Finish the USB connection (pages 80 and 86). The image appears rough • The image may appear rough right after p This is not a malfunction. right after playback starts. playback starts due to the image processing. The image does not • The video output signal setting of your camera p Change the setting (pages 44 and 107). appear on the TV screen. on the Setup screen is incorrect. • The connection is not correct. p Check the connection (page 37). • The USB jack is connected. p Follow the procedure of the note P on page 80 (Windows) or 1 on page 86 (Macintosh) and disconnect the USB cable. The image cannot be — p See page 93. played back on a computer., filename[C:\Documents and Settings\gotanda\Desktop\3085733111DSCT1U2\13trb.fm] masterpage:Right 01cov.book Page 93 Monday, September 29, 2003 11:15 AM

Deleting/Editing Images

Symptom Cause Solution Your camera cannot • The image is protected. p Cancel the protection (page 66). delete an image. • You are using a “Memory Stick Duo” withapSet it to the recording position (page 109). write-protect switch, and the write-protect switch is set to the LOCK position. You have deleted an • Once you have deleted an image, you cannot p Marking - (protect) will prevent you from deleting images by image by mistake. restore it. mistake (page 66). p Accidental deletion can be prevented by setting the write- protect switch of a “Memory Stick Duo” that has a write-protect switch to the LOCK position (page 109). The resizing function • You cannot resize movies and Multi Burst — does not work. images. You cannot display a print • You cannot display print (DPOF) marks on — (DPOF) mark. movies. You cannot cut images. • The movie is not long enough to cut. — • Protected movie cannot be cut. p Cancel the protection (page 66). • Still images cannot be cut. —

Computers

Symptom Cause Solution You do not know if the OS — p Check “Recommended computer environment” (pages 75 and of your computer is 86). compatible. You cannot install the — p In Windows 2000, log on as Administrator (authorized USB driver. Administrators) (page 75). Troubleshooting, filename[C:\Documents and Settings\gotanda\Desktop\3085733111DSCT1U2\13trb.fm] masterpage:Left 01cov.book Page 94 Monday, September 29, 2003 11:15 AM Symptom Cause Solution Your computer does not • The camera is turned off. p Turn on the camera (page 16). recognize your camera. • The battery level is low. p Use the AC Adaptor (page 15). • You are not using the supplied USB cable. p Use the supplied USB cable (page 79). • The USB cable is not connected firmly. p Disconnect the USB cable from both the computer and the USB cradle, and connect it again firmly. Make sure that “USB Mode” is displayed on the LCD screen (page 79). • The camera is not properly installed to the USB p Properly install the camera (page 10). cradle. • [USB Connect] is set to [PTP] on the Setup p Set it to [Normal] (pages 44 and 107). screen. • The USB connectors on your computer are p Disconnect all equipment other than the keyboard, the mouse connected to other equipment besides the and the USB cradle from the USB connectors. keyboard, the mouse and the USB cradle. • The camera is not connected directly to your p Connect the camera directly to your computer without passing computer. through a USB hub or other device. • The USB driver is not installed. p Install the USB driver (page 76). • Your computer does not properly recognize the p Delete the incorrectly recognized device from your computer device because you connected the camera and (page 82), then install the USB driver (page 76). your computer with the USB cable before you installed the “USB Driver” from the CD-ROM (supplied). You cannot copy images. • The camera is not correctly connected to your p Connect the camera and your computer correctly using the USB computer. cable (page 79). • You are not using the correct copy procedure for p Follow the designated copy procedure for your OS (pages 81, 82 your OS. and 86). — p If you use the “Image Transfer” software, see page 80. — p If you are using the “ImageMixer Ver. 1.5 for Sony” application software, click on HELP. After making a USB — p Select [Launch Image Transfer automatically when your connection, “Image camera, etc., is connected.] at [Basic] setting (page 81). Transfer” does not — p Make a USB connection when the computer is turned on automatically start. (page 79). The image cannot be — p If you are using the “ImageMixer Ver. 1.5 for Sony” application played back on a software, click on HELP. computer. — p Consult the computer or software manufacturer., filename[C:\Documents and Settings\gotanda\Desktop\3085733111DSCT1U2\13trb.fm] masterpage:Right 01cov.book Page 95 Monday, September 29, 2003 11:15 AM Symptom Cause Solution The image and sound are • You are playing back the file directly from the p Copy the file to the hard disk of your computer and then play interrupted by noise when “Memory Stick Duo.” back the file from the hard disk (pages 80, 81, 82 and 86). you view a movie on a computer. You cannot print an — p Check the printer settings. image. — p Click on HELP for the “ImageMixer Ver. 1.5 for Sony” application software. An error message appears • The computer display is not set correctly. p Set the computer display as follows: when you set the CD-ROM Windows: 800 × 600 dots or more (supplied) in your High Color (16-bit color, 65,000 colors) or more computer. Macintosh: 800 × 600 dots or more 32,000-color mode or more “Memory Stick Duo” Symptom Cause Solution You cannot insert a • You are inserting it incorrectly. p Insert it from the right side (page 19). “Memory Stick Duo.” You cannot record on a • You are using a “Memory Stick Duo” withapSet it to the recording position (page 109). “Memory Stick Duo.” write-protect switch, and the write-protect switch on the “Memory Stick Duo” is set to the LOCK position. • The “Memory Stick Duo” is full. p Delete unnecessary images (pages 39 and 72). • The image size is set to [640(Fine)] when pInsert a “Memory Stick PRO Duo” (pages 70 and 109). recording movies. p Set the image size to other than [640(Fine)]. You cannot format a • You are using a “Memory Stick Duo” withapSet it to the recording position (page 109). “Memory Stick Duo.” write-protect switch, and the write-protect switch on the “Memory Stick Duo” is set to the LOCK position. You have formatted a • All the data on the “Memory Stick Duo” are p We recommend that you set the “Memory Stick Duo” write- “Memory Stick Duo” by deleted by formatting. You cannot restore them. protect switch to the LOCK position to prevent accidental mistake. erasure (page 109). Troubleshooting, filename[C:\Documents and Settings\gotanda\Desktop\3085733111DSCT1U2\13trb.fm] masterpage:Left 01cov.book Page 96 Monday, September 29, 2003 11:15 AM

Others

Symptom Cause Solution Your camera does not • You are not using an “InfoLITHIUM” battery p Use an “InfoLITHIUM” battery pack (page 111). work. pack. • The battery level is low. (The E indicator p Charge the battery pack (page 11). appears.) • The AC Adaptor is not connected securely. p Connect it securely to the multi connector of your camera and to a wall outlet (wall socket) (page 15). • The camera is not properly installed to the USB p Properly install the camera (page 10). cradle. The power is on, but the • The built-in microcomputer is not working p Disconnect, and then, after one minute, reconnect all power camera does not work. properly. sources and turn on the camera. If this does not work, press the RESET button on the lower side of the control button using a fine-tipped object, then turn on the power again. (All the settings including date and time are cleared.) You cannot identify an — p Check the indicator (pages 114 to 117). indicator on the LCD screen. The lens gets fogged. • Moisture condensation has occurred. p Turn off the camera and leave for about an hour at room temperature for the moisture to evaporate before use (page 108). The camera becomes — p This is not a malfunction. warm when you use it for a while., filename[C:\Documents and Settings\gotanda\Desktop\3085733111DSCT1U2\13trb.fm] masterpage:Right 01cov.book Page 97 Monday, September 29, 2003 11:15 AM

Warnings and

messages The following messages may appear on the LCD screen. Message Meaning/Corrective Action No Memory Stick • Insert a “Memory Stick Duo” (page 19). System error • Turn the power off and on again (page 16). Memory Stick error • The inserted “Memory Stick Duo” cannot be used in your camera (page 109). • The “Memory Stick Duo” is damaged, or the terminal section of the “Memory Stick Duo” is dirty. • Insert the “Memory Stick Duo” correctly (page 19). Memory Stick type error • The inserted “Memory Stick Duo” cannot be used in your camera (page 109). Format error • Failed to format the “Memory Stick Duo.” Format the “Memory Stick Duo” again (page 41). • Re-insert the “Memory Stick Duo” several times (page 19). Memory Stick locked • You are using a “Memory Stick Duo” with a write-protect switch, and the write-protect switch on the “Memory Stick Duo” is set to the LOCK position. Set it to the recording position (page 109). No memory space • The capacity of the “Memory Stick Duo” is insufficient. You cannot record images. Delete unnecessary images or data (pages 39 and 72). Read only memory • Your camera cannot record or delete images to this “Memory Stick Duo.” No file in this folder • No images have been recorded in this folder. Folder error • A folder with the same first three digits number already exists in the “Memory Stick Duo.” (For example: 123MSDCF and 123ABCDE) Select other folders, or create a new folder. Cannot create more folders • The folder whose first three digits of the name is “999” exists in the “Memory Stick Duo.” You cannot create any folders. Cannot record • The camera cannot record images in the selected folder. Select a different folder (page 45). Lens cover closed • The lens cover is closed when the mode switch is set to or . File error • An error occurred while playing back the image. For "InfoLITHIUM" battery • The battery pack is not the “InfoLITHIUM” type. only Image size over • You are playing back an image of a size that cannot be played back on your camera. Troubleshooting, filename[C:\Documents and Settings\gotanda\Desktop\3085733111DSCT1U2\13trb.fm] masterpage:Left 01cov.book Page 98 Monday, September 29, 2003 11:15 AM Message Meaning/Corrective Action Cannot divide • The movie is not long enough to be divided. • The file is not a movie. Invalid operation • You are playing back a file that was created on equipment other than this camera. • The battery level is low or zero. Charge the battery pack (page 11). Depending on the conditions of use or the type of battery pack, the indicator may flash even though there are still 5 to 10 minutes of remaining battery time left. • The amount of lights is not sufficient, so you are not holding the camera steady enough. Use the flash, secure the camera in place. But the vibration warning indicator does not disappear. • The camera is unsteady, so vibration easily occurs. Hold the camera steady with both hands and shoot the image. However, note that the vibration warning indicator does not disappear. 640(Fine) is not available • Insert a “Memory Stick PRO Duo.”, filename[C:\Documents and Settings\gotanda\Desktop\3085733111DSCT1U2\13trb.fm] masterpage:Right1:2 01cov.book Page 99 Monday, September 29, 2003 11:15 AM

Self-diagnosis display Code Cause Corrective action

C:32: ss There is trouble with your Turn the power off and on again (page 16). – If a code starting with an alphabet camera’s hardware. letter appears C:13: ss The camera cannot read or write Re-insert the “Memory Stick Duo” several Your camera has a self-diagnosis display. data on the “Memory Stick Duo.” times. This function displays the camera condition An unformatted “Memory Stick Format the “Memory Stick Duo” (page 41). on the LCD screen with a combination of a Duo” is inserted. letter and four numerical digits. If this The inserted “Memory Stick Insert a new “Memory Stick Duo” occurs, check the following code chart and Duo” cannot be used with your (page 19). attempt the corresponding corrective camera, or the data is damaged. actions. The last two digits (indicated by E:61: ss A camera malfunction that you Press the RESET button (page 88) located ) will differ depending on the state of E:91: ss cannot reverse has occurred. on the lower right side of the control button, ss then turn on the power again. the camera. If you are unable to solve the problem even after trying the corrective actions a few C:32:ss times, contact your Sony dealer or local authorized Sony service facility. Self-diagnosis display Troubleshooting, filename[C:\Documents and Settings\gotanda\Desktop\3085733111DSCT1U2\14add.fm] masterpage:Left1:2 01cov.book Page 100 Monday, September 29, 2003 11:15 AM Additional information E-Mail (Units: images)

Number of images 16MB 32MB 64MB 128MB MSX-M256 MSX-M512

that can be saved or 5M 6 (11) 12 (23) 25 (46) 50 (94) 91 (170) 186 (345) shooting time 3:2 6 (11) 12 (23) 25 (46) 50 (94) 91 (170) 186 (345) The number of images that can be saved and 3M 9 (17) 20 (35) 40 (71) 80 (143) 145 (255) 296 (518) the shooting time differ, depending on the 1M 23 (42) 47 (85) 96 (171) 192 (343) 340 (595) 691 (1210) capacity of the “Memory Stick Duo,” the VGA 81 (162) 163 (327) 328 (657) 658 (1317) 1190 (2381) 2420 (4841) image size, and the image quality. Refer to the following charts when you choose a Voice (Units: images) “Memory Stick Duo.” 16MB 32MB 64MB 128MB MSX-M256 MSX-M512 • The number of images is listed in Fine 5M 6 (11) 12 (22) 25 (45) 50 (91) 90 (166) 183 (337) (Standard) order. 3:2 6 (11) 12 (22) 25 (45) 50 (91) 90 (166) 183 (337) • The values for the number of images that 3M 9 (17) 19 (34) 39 (69) 79 (138) 142 (246) 290 (500) can be saved and the shooting time may 1M 22 (38) 45 (78) 91 (157) 183 (316) 324 (549) 660 (1117) vary, depending on the shooting VGA 69 (121) 140 (245) 281 (492) 564 (987) 1020 (1785) 2074 (3630) conditions. • For normal shooting times and numbers When the recording time is five seconds of images that can be saved, see page 21. Multi Burst (Units: images) • When the number of remaining shooting images is greater than 9999, the “>9999” 16MB 32MB 64MB 128MB MSX-M256 MSX-M512 indicator appears on the LCD screen. 1M 24 (46) 50 (93) 101 (187) 202 (376) 357 (649) 726 (1320), filename[C:\Documents and Settings\gotanda\Desktop\3085733111DSCT1U2\14add.fm] masterpage:Right2:1 01cov.book Page 101 Monday, September 29, 2003 11:15 AM Movie 16MB 32MB 64MB 128MB MSX-M256 MSX-M512 640(Fine) — — — — 0:02:57 0:06:02 640(Standard) 0:00:42 0:01:27 0:02:56 0:05:54 0:10:42 0:21:47 160 0:11:12 0:22:42 0:45:39 1:31:33 2:51:21 5:47:05 Recording time notation The time is indicated as hours, minutes, seconds in order from the left. Example: [1:10:28] t 1 hour, 10 minutes, 28 seconds Additional information, filename[C:\Documents and Settings\gotanda\Desktop\3085733111DSCT1U2\14add.fm] masterpage:Left 01cov.book Page 102 Monday, September 29, 2003 11:15 AM

Menu items

Menu items that can be modified differ depending on the position of the mode switch. Factory settings are indicated with x.

When the mode switch is set to

Item Setting Description (Camera) / / / / / / / Selects the camera mode (page 23). / Program / xAuto (EV)1) +2.0EV / +1.7EV / +1.3EV / +1.0EV / Adjusts the exposure (page 50). +0.7EV / +0.3EV / x0EV / –0.3EV / –0.7EV / –1.0EV / –1.3EV / –1.7EV / –2.0EV 9 (Focus)1) 5) ∞ / 7.0m / 3.0m / 1.0m / 0.5m / Spot AF / Chooses the auto focus method (page 47), or sets the focus preset distance Center AF / xMulti AF (page 49). (Metering Spot / xMulti Adjusts the exposure to the subject you are shooting (page 52). Sets the metering Mode)1) region. WB (White Bal)1) 5) WB / / / / / xAuto Sets the white balance (page 54). ISO1) 400 / 200 / 100 / xAuto Selects the ISO sensitivity. Select a large number when shooting in dark locations or shooting a subject moving at high speed, or select a small number to obtain high image quality. • Note that the image tends to become noisier as the ISO sensitivity number increases. (P.Quality)1) xFine / Standard Records images with fine/standard quality (page 44)., filename[C:\Documents and Settings\gotanda\Desktop\3085733111DSCT1U2\14add.fm] masterpage:Right 01cov.book Page 103 Monday, September 29, 2003 11:15 AM Item Setting Description Mode (REC Mode)5) Voice – Records an audio file (with a still image) in addition to the JPEG file (page 58). E-Mail – Records a small-size (320×240) JPEG file in addition to the selected image size (page 57). Multi Burst – Records a continuous burst of 16 frames within a single still image in a single press of the shutter button (image size 1M) (page 56). Exp Brktg – Records three images with the exposure value of each image slightly shifted (page 52). Framing Burst – Records a Multi Burst series of images while displaying the images on the LCD screen (page 55). Speed Burst – Records a Multi Burst series of images with a short shooting interval (page 55). xNormal – Records an image using the normal recording mode. BRK (Bracket ±1.0EV / x±0.7EV / ±0.3EV Sets the exposure compensation value when recording three images with each Step)3) exposure adjustment value (page 52). (This setting cannot be made when [Mode] (REC Mode) in the menu is set to other than [Exp Brktg].) M (Interval)3) 1/7.5 / 1/15 / x1/30 Selects the Multi Burst shutter interval (page 56). (This setting cannot be made when [Mode] (REC Mode) in the menu is set to other than [Multi Burst].) ± (Flash Level)4) High / xNormal / Low Selects the amount of flash light (page 55). PFX (P.Effect)1) Solarize / Sepia / Neg. Art / xOff Sets the image special effects (page 58). (Saturation)2) + / xNormal / – Adjusts the saturation of the image. The indicator appears (except when the setting is Normal). (Contrast)2) + / xNormal / – Adjusts the contrast of the image. The indicator appears (except when the setting is Normal). (Sharpness)2) + / xNormal / – Adjusts the sharpness of the image. The indicator appears (except when the setting is Normal). 1) This does not appear when (Camera) in the menu is set to [Auto]. 2) This does not appear when (Camera) in the menu is set to other than [Program]. 3) This does not appear when (Camera) in the menu is set to [Auto], (Magnifying glass mode), (Twilight mode), (Twilight portrait mode) or (Fireworks mode). 4) This does not appear when (Camera) in the menu is set to [Auto], (Twilight mode) or (Fireworks mode). 5) The available settings are limited according to the (Camera) setting in the menu. Additional information, filename[C:\Documents and Settings\gotanda\Desktop\3085733111DSCT1U2\14add.fm] masterpage:Left 01cov.book Page 104 Monday, September 29, 2003 11:15 AM

When the mode switch is set to

Item Setting Description (EV) +2.0EV / +1.7EV / +1.3EV / +1.0EV / Adjusts the exposure (page 50). +0.7EV / +0.3EV / x0EV / –0.3EV / –0.7EV / –1.0EV / –1.3EV / –1.7EV / –2.0EV 9 (Focus) ∞ / 7.0m / 3.0m / 1.0m / 0.5m / Spot AF / Chooses the auto focus method (page 47), or sets the focus preset distance Center AF / xMulti AF (page 49). (Metering Mode) Spot / xMulti Adjusts the exposure to the subject you are shooting (page 52). Sets the metering region. WB (White Bal) / / / / xAuto Sets the white balance (page 54). PFX (P.Effect) Solarize / Sepia / Neg. Art / xOff Sets the image special effects (page 58)., filename[C:\Documents and Settings\gotanda\Desktop\3085733111DSCT1U2\14add.fm] masterpage:Right 01cov.book Page 105 Monday, September 29, 2003 11:15 AM

When the mode switch is set to

Item Setting Description (Folder) OK / Cancel Selects the folder containing the image you want to play back (page 60). (Protect) — Protects and unprotects images against accidental erasure (page 66). (DPOF) — Marks and unmarks the print (DPOF) mark on still images you want to print (page 68). (Slide) Interval – Sets the slide show interval (page 62). (Only in single-image mode) x3 sec / 5 sec / 10 sec / 30 sec / 1 min Image – Sets the range of the playback images. xFolder / All Repeat – Plays back images repeatedly. xOn / Off Start – Starts the slide show. Cancel – Cancels the slide show. (Resize) 5M / 3M / 1M / VGA / Cancel Changes the recorded still image size (page 67). (Only in single-image mode) (Rotate) (counter clockwise) / Rotates the still image (page 63). (Only in single-image mode) (clockwise) / OK / Cancel (Divide) OK / Cancel Divides movie (page 74). (Only in single-image mode) Additional information, filename[C:\Documents and Settings\gotanda\Desktop\3085733111DSCT1U2\14add.fm] masterpage:Left 01cov.book Page 106 Monday, September 29, 2003 11:15 AM

Setup items

The Setup screen appears when you advance to in the menu and press B again. Factory settings are indicated with x. (Camera) Item Setting Description AF Mode xSingle / Monitor / Cont Selects the focus operation mode (page 48). Digital Zoom xSmart / Precision / Off Selects the digital zoom mode (page 26). Date/Time Day & Time / Date / xOff Selects whether to superimpose the date or time onto the image (page 30). The date and time are not inserted in movie or Multi Burst mode. Also, the date and time appear only during playback, and do not appear during recording. Red Eye Reduction On / xOff Reduces the red-eye phenomenon when using a flash (page 29). AF Illuminator xAuto / Off Selects whether to emit an AF assist light in the dark. Helps when it is hard to focus on the subject under dark lighting (page 30). Auto Review On / xOff Selects whether to automatically display the recorded image on the LCD screen immediately after shooting a still image. When set to [On], the recorded image is displayed for approximately two seconds. You cannot shoot the next image during this period. (Memory Stick Tool) Item Setting Description Format OK / Cancel Formats the “Memory Stick Duo.” Note that formatting erases all data on a “Memory Stick Duo,” including even protected images (page 41). Create REC. Folder OK / Cancel Creates a folder for recording images (page 45). Change REC. Folder OK / Cancel Changes a folder for recording images (page 46)., filename[C:\Documents and Settings\gotanda\Desktop\3085733111DSCT1U2\14add.fm] masterpage:Right 01cov.book Page 107 Monday, September 29, 2003 11:15 AM (Setup 1) Item Setting Description LCD Brightness Bright / xNormal / Dark Selects the LCD brightness. This has no effect on the recorded images. LCD Backlight Bright / xNormal Selects the brightness of the LCD backlight. Selecting [Bright] makes the screen bright and easy to see when using the camera outdoors or in other bright locations, but also uses up the battery charge faster. Displayed only when using your camera with the battery pack. Beep Shutter – Turns on the shutter sound. (The shutter sound is heard when you press the shutter button.) xOn – Turns on the beep/shutter sound when you press the control button/shutter button. Off – Turns off the beep/shutter sound. A Language — Displays the menu items, warnings and messages in selected language. (Setup 2) Item Setting Description File Number xSeries – Assigns numbers to files in sequence even if the “Memory Stick Duo” is changed or the recording folder is changed. Reset – Resets the file numbering and starts from 0001 each time the folder is changed. (When the recording folder contains a file, a number one higher than the largest number is assigned.) USB Connect PTP / xNormal Switches the USB mode (page 79). Video Out NTSC – Sets the video output signal to NTSC mode (e.g., USA, Japan). PAL – Sets the video output signal to PAL mode (e.g., Europe). Clock Set OK / Cancel Sets the date and time (pages 17 and 44). Additional information, filename[C:\Documents and Settings\gotanda\Desktop\3085733111DSCT1U2\14add.fm] masterpage:Left 01cov.book Page 108 Monday, September 29, 2003 11:15 AM Cleaning the DC plug On moisture condensation

Precautions Clean the DC plug of the AC Adaptor. Do If the camera is brought directly from a cold

not use the dirty plug. Use of the dirty plug to a warm location, or is placed in a very

Do not leave the camera in the may not properly charge the battery pack. damp room, moisture may condense inside

following places or outside the camera. This moisture • In extremely hot place, such as in a car Cleaning the lens condensation may cause a malfunction of parked in the sun. The camera body may Wipe the lens with a soft cloth to remove the camera. become deformed or this may cause a fingerprints, dust, etc. malfunction. Moisture condensation occurs easily • Under direct sunlight or near a heater. Cleaning the camera surface when: The camera body may become deformed Clean the camera surface with a soft cloth • The camera is brought from a cold or this may cause a malfunction. slightly moistened with water, then wipe location such as a ski slope into a warmly • On rocking vibration the surface with a dry cloth. Do not use the heated room. • Near strong magnetic place following as this may damage the finish or • The camera is taken from an air- • In sandy or dusty places, be careful not to the casing. conditioned room or car interior to the hot let sand or dust get into the camera. This • Thinner outdoors, etc. may cause the camera to malfunction, and • Benzine in some cases this malfunction cannot be • Alcohol How to prevent moisture repaired. • Disposable cloth condensation • Volatile insecticide When bringing the camera from a cold • Contact with rubber or vinyl for a long

On carrying place to a warm place, seal the camera in a time plastic bag and allow it to adapt to

Do not sit down in a chair or other place conditions at the new location over a period with the camera in the back pocket of your On operating temperature of time (about an hour). trousers or skirt, as this may cause malfunction or damage the camera. The camera is designed for use between the temperatures of 0°C and 40°C (32° F and If moisture condensation occurs

On cleaning 104° F). Shooting in extremely cold or hot Turn off the camera and wait about an hour

Cleaning the LCD screen places that exceed this range is not for the moisture to evaporate. Note that if Wipe the screen surface with an LCD recommended. you attempt to shoot with moisture cleaning kit (not supplied) to remove remaining inside the lens, you will be fingerprints, dust, etc. unable to record clear images., filename[C:\Documents and Settings\gotanda\Desktop\3085733111DSCT1U2\14add.fm] masterpage:Right 01cov.book Page 109 Monday, September 29, 2003 11:15 AM

On internal rechargeable button Charging method

battery Connect the camera to a wall outlet (wall On “Memory Stick” This camera has an internal rechargeable socket) using the AC Adaptor, or install a button battery for maintaining the date and charged battery pack, and leave the camera “Memory Stick” is a compact, portable IC time and other settings regardless of for 24 hours or more with the power off. recording medium with a data capacity that whether the power is on or off. exceeds the capacity of a floppy disk. This rechargeable button battery is • The internal rechargeable button battery is The types of “Memory Stick” that can be continually charged as long as you are using located inside the cover in the left side of used with this camera are listed in the table battery insertion slot of the camera. Never the camera. However, if you use the camera below. However, proper operation cannot remove the rechargeable button battery except for only short periods it discharges be guaranteed for all “Memory Stick” when disposing of the camera. gradually, and if you do not use the camera functions. at all for about one month it becomes Rechargeable button battery Recording/“Memory Stick” type completely discharged. In this case, be sure Playback3) to charge this rechargeable button battery Memory Stick – before using the camera. Memory Stick Duo a However, even if this rechargeable button battery is not charged, you can still use the Memory Stick Duo (MagicGate/high-speed 2) a camera as long as you do not record the date data transfer)1) and time. Battery insertion slot MagicGate Memory Stick – MagicGate Memory Stick a Duo1) Memory Stick PRO – Memory Stick PRO Duo1) 2)a 1) “MagicGate Memory Stick Duo” and “Memory Stick PRO Duo” are equipped with MagicGate functions. MagicGate is copyright protection technology that uses encryption technology. Data recording/playback that requires MagicGate functions cannot be performed with this camera. 2) Supports high-speed data transfer using a parallel interface. Additional information, filename[C:\Documents and Settings\gotanda\Desktop\3085733111DSCT1U2\14add.fm] masterpage:Left 01cov.book Page 110 Monday, September 29, 2003 11:15 AM 3) 640(Fine) size movies can be recorded and • Do not remove the “Memory Stick Duo” while Notes on using a Memory Stick Duo played back only using “Memory Stick PRO reading or writing data. Adaptor (supplied) Duo.” • Data may be corrupted in the following cases: • When using a “Memory Stick Duo” with a – When the “Memory Stick Duo” is removed “Memory Stick” compliant device, be sure to • “Memory Stick Duo” formatted with a or the camera is turned off during read or insert the “Memory Stick Duo” into a Memory computer is not guaranteed to operate with this write operation Stick Duo Adaptor. camera. – When the “Memory Stick Duo” is used in If you insert a “Memory Stick Duo” into a • Data read/write speeds differ depending on the locations subject to static electricity or “Memory Stick” compliant device without a combination of the “Memory Stick Duo” and electrical noise Memory Stick Duo Adaptor, you might not be the equipment used. • We recommend backing up important data. able to remove it from the device. • Do not press down hard when you write down • When inserting a “Memory Stick Duo” into a

Notes on using “Memory Stick Duo” on the memo area. Memory Stick Duo Adaptor, make sure the

• Do not attach a label on the “Memory Stick • You cannot record, edit or delete images if you “Memory Stick Duo” is inserted facing in the 4) Duo” itself nor on a Memory Stick Duo slide the write-protect switch to LOCK with a correct direction, then insert it all the way in. Adaptor. fine-tipped object. Incorrect insertion may result in a malfunction.• When you carry or store the “Memory Stick • When using a “Memory Stick Duo” inserted Terminal Duo,” put it in the case supplied with it. into a Memory Stick Duo Adaptor with a • Do not touch the terminal of the “Memory “Memory Stick” compliant device, make sure Stick Duo” with your hand or a metal object. that the “Memory Stick Duo” is inserted facing • Do not strike, bend or drop the “Memory Stick the correct direction. Note that improper use Write-protect Duo.” 4) may damage the equipment.switch • Do not disassemble or modify the “Memory • Do not insert a Memory Stick Duo Adaptor into Stick Duo.” Memo area a “Memory Stick” compliant device without a • Do not expose the “Memory Stick Duo” to “Memory Stick Duo” attached. Doing so may water. The position or the shape of the write-protect result in malfunction of the unit. 4) • Do not leave the “Memory Stick Duo” within switch may differ depending on the “Memory the reach of small children. They might Stick Duo” you use. accidentally swallow it. Note on using “Memory Stick PRO 4) The “Memory Stick Duo” supplied with this • Do not use or keep the “Memory Stick Duo” Duo” (not supplied) camera does not have a write-protect switch. under the following conditions: “Memory Stick PRO Duo” with a capacity up to When using the supplied “Memory Stick – High temperature locations such as the hot 512MB have been confirmed to operate properly Duo,” be careful not to edit or delete data by interior of a car parked in direct sunlight with this camera. mistake. – Locations exposed to direct sunlight – Humid locations or locations with corrosive substances, filename[C:\Documents and Settings\gotanda\Desktop\3085733111DSCT1U2\14add.fm] masterpage:Right 01cov.book Page 111 Monday, September 29, 2003 11:15 AM

Effective use of the battery pack How to store the battery pack On “InfoLITHIUM” • Battery performance decreases in low- • If the battery pack is not to be used for a

battery pack temperature surroundings. So, the time that long time, do the following procedure the battery pack can be used is shorter in once per year to maintain proper function. cold places. We recommend the following 1 Fully charge the battery. to ensure longer battery pack use: – Put the battery pack in a pocket close to 2 Discharge on your camera.What is the “InfoLITHIUM” your body to warm it up, and insert it in 3 Remove the battery from your camera battery pack? your camera immediately before you and store it in a dry, cool place. The “InfoLITHIUM” battery pack is a start shooting. • To use the battery pack up on your lithium-ion battery pack that has functions • Frequently operating the zoom or flash camera, leave the POWER button to on in for communicating information related to wears out the battery charge faster. slide show playback mode (page 62) until operating conditions of your camera. • We recommend having spare battery the power goes off. The “InfoLITHIUM” battery pack packs handy for two or three times the • Always carry and store the battery pack in calculates the power consumption expected shooting time, and making trial the battery case to prevent the battery according to the operating conditions of shots before taking the actual shots. terminals from becoming dirty or short your camera, and displays the remaining • Do not expose the battery pack to water. circuited. battery time in minutes. The battery pack is not water-resistant.

Battery life Charging the battery pack Remaining battery time indicator • The battery life is limited. Battery

We recommend charging the battery pack The power may go off although the battery capacity decreases little by little as you in an ambient temperature of between 10°C remaining indicator shows there is enough use it more and more, and as time passes. to 30°C (50° F to 86° F). You may not be power to operate. Use the battery pack up When the battery operating time is able to efficiently charge the battery pack and charge the battery pack fully again so shortened considerably, a probable cause outside of this temperature range. that the indication on the battery remaining is that the battery pack has reached the indicator is correct. Note, however, that the end of its life. Buy a new battery pack. correct battery indication sometimes will • The battery life varies according to how it not be restored if the camera is used in high is stored and the operating conditions and temperatures for a long time or left in a fully environment for each battery pack. charged state, or the battery pack is frequently used. Additional information, filename[C:\Documents and Settings\gotanda\Desktop\3085733111DSCT1U2\14add.fm] masterpage:Left 01cov.book Page 112 Monday, September 29, 2003 11:15 AM [Input and Output connectors] xUC-TA USB cradle

Specifications Multi connector [Input and Output connectors]

A/V OUT (MONO) jack (Monaural) x Camera [LCD screen] Minijack [System] LCD panel Video: 1 Vp-p, 75 Ω, unbalanced, 6.2 cm (2.5 type) TFT drive sync negative Image device Audio: 327 mV (at a 47 kΩ load) 7.66 mm (1/2.4 type) color CCD Total number of dots Output impedance 1 kΩ Primary color filter 211 200 (960×220) dots USB jack B Total pixels number of camera USB connection Approx. 5 255 000 pixels [General] High-Speed USB Effective pixels number of camera Used battery pack (USB 2.0 High-Speed compatible) Approx. 5 090 000 pixels NP-FT1 DC IN jack Lens Carl Zeiss Vario-Tessar Power requirements Camera connector 3× zoom lens 3.6Vf= 6.7 – 20.1 mm (38 – 114 mm when Power consumption (during shooting) converted to a 35 mm still camera) x AC-LM5 AC Adaptor1.6 W F3.5 – 4.4 Operating temperature Power requirements Exposure control 0°C to +40°C (+32°F to +104°F) 100 to 240 V AC, 50/60 Hz Automatic exposure, Scene selection Storage temperature Current consumption (8 modes) –20°C to +60°C (–4°F to +140°F) 0.2 A White balance Dimensions Power consumption Automatic, Daylight, Cloudy, 91×60×21 mm 10 W Fluorescent, Incandescent, Flash (3 5/8×2 3/8×2 7/32 inches) Rated output voltage File format (DCF compliant) (W/H/D, excluding maximum 4.2 V DC, 1.5 A Still images: Exif Ver. 2.2 JPEG protrusions) Operating temperature compliant, DPOF compatible Mass Approx. 180 g (6.3 oz) (including 0°C to +40°C (+32°F to +104°F) Audio with still image: MPEG1 battery pack NP-FT1, “Memory Stick compliant (Monaural) Storage temperature Movies: MPEG1 compliant Duo” and wrist strap) –20°C to +60°C (–4°F to +140°F) (Monaural) Built-in microphone Dimensions Recording media Electret condenser microphone Approx. 47×30×80 mm “Memory Stick Duo” Built-in speaker (1 7/8×1 3/16×3 1/4 inches) Piezo-electric speaker (W/H/D, excluding projecting parts)Flash Recommended distance (ISO set to Auto): Exif Print Compatible Mass Approx. 170 g (6.0 oz) excluding 0.3 m to 1.5 m (11 7/8 inches to PRINT Image Matching II Compatible power cord (mains lead) 59 1/8 inches) (W) 0.5 m to 1.5 m (19 3/4 inches to 59 1/8 inches) (T), filename[C:\Documents and Settings\gotanda\Desktop\3085733111DSCT1U2\14add.fm] masterpage:Right 01cov.book Page 113 Monday, September 29, 2003 11:15 AM x NP-FT1 battery pack Used battery Lithium-ion battery Maximum voltage DC 4.2 V Nominal voltage DC 3.6 V Capacity 2.4 Wh (680 mAh) x Accessories • AC-LM5 AC Adaptor (1) • Power cord (mains lead) (1) • UC-TA USB cradle (1) • USB cable (1) • NP-FT1 battery pack (1) • A/V connecting cable (1) • Wrist strap (1) • “Memory Stick Duo” (32 MB) (1) • Memory Stick Duo Adaptor (1) • CD-ROM (USB driver SPVD-013) (1) • Operating instructions (1) Design and specifications are subject to change without notice. Additional information, filename[C:\Documents and Settings\gotanda\Desktop\3085733111DSCT1U2\14add.fm] masterpage:Left2:1 01cov.book Page 114 Monday, September 29, 2003 11:15 AM J Spot metering cross hair (52)

The LCD screen K NR slow shutter indicator (34)/

Shutter speed indicator

When shooting still images L Multi Burst interval indicator

(56)/Image size indicator (20) 1 qs M Image quality indicator (44) qd N Recording folder indicator (45) 2 qf O Remaining number of recordable 3 qg images indicator (21) 60min VGA 101 4 qh1/30” P Remaining “Memory Stick” 5 C:32:00 qj capacity indicator qk 6 SOLARIZE Q Self-diagnosis display (99)/Date/ ql + Time indicator (17)w; R ISO number indicator (102) wa S Bracket step value indicator (52) 7 T Self-timer indicator (28) S AF 125 F3.5 ws U Histogram indicator (51) 8 wd V Menu/Guide menu (43) 9 wf W EV level indicator (50) q; wg X Aperture value indicator qa wh Y Vibration warning indicator (98) A Recording mode indicator (52, E Sharpness indicator (103)/ Z AF range finder frame (47) 55-58) Saturation indicator (103)/ B AE/AF lock indicator (22, 49) Contrast indicator (103)/ C Battery remaining indicator (13) AF illuminator (30, 106) D White balance indicator (54)/ F Metering mode indicator (52)/ Camera mode indicator (23)/ Picture effect indicator (58) Flash mode indicator (29)/ G Low battery warning indicator (98) Red-eye reduction indicator (29) H Macro indicator (27) I AF mode (48)/AF range finder Page numbers in parentheses indicate the frame indicator (47)/Focus location of additional important preset value (49) information., filename[C:\Documents and Settings\gotanda\Desktop\3085733111DSCT1U2\14add.fm] masterpage:Right2:1 01cov.book Page 115 Monday, September 29, 2003 11:15 AM

When shooting movies

1 q; qa 2 qs 60min STD640101 3 STBY00:00:00 [00:28:25] qd 4 C:32:00 qf SOLARIZE qg 5 + 7 qh 8 qj A Recording mode indicator (70) L Recording folder indicator (45) B Battery remaining indicator (13) M Remaining “Memory Stick” C White balance indicator (54) capacity indicator D Low battery warning indicator N Self-diagnosis display (99) (98) O Self-timer indicator (28) E Metering mode indicator (52)/ P Menu/Guide menu (43) Picture effect indicator (58) Q EV level indicator (50) F Spot metering cross hair (52) G Macro indicator (27) H AF range finder frame indicator (47)/Focus preset value (49) I AF range finder frame (47) J Image size indicator (70) K Recording time [maximum Page numbers in parentheses indicate the recordable time] indicator (101) location of additional important information. Additional information, filename[C:\Documents and Settings\gotanda\Desktop\3085733111DSCT1U2\14add.fm] masterpage:Left2:1 01cov.book Page 116 Monday, September 29, 2003 11:15 AM

When playing back still images

1 8 q; 60min VGA 3 101 12/12 qa C:32:00 qs 4 x1.3 +2.0EV qd 5 500 F3.5 qf 6 qg BACK/NEXT VOLUME qh A Image size indicator (20) K Remaining “Memory Stick” B Recording mode indicator (52, capacity indicator 55-58) L Self-diagnosis display (99) C Volume indicator (58)/ M Metering mode indicator (52)/ Protect indicator (66)/ Flash indicator/White balance Print (DPOF) mark indicator (68) indicator (54) D Zoom scaling indicator (61)/Jog N Shutter speed indicator/Aperture playback indicator (65) value indicator E Change folder indicator (46) O Histogram indicator (51) F EV level indicator (50)/ISO P Recording date of the playback number indicator (102) image (30)/Menu/Guide menu G Folder-file number (83) (43) H Playback folder indicator (60) I Image number • Pressing MENU switches the menu on/off. J Number of images recorded in Page numbers in parentheses indicate the selected folder location of additional important information., filename[C:\Documents and Settings\gotanda\Desktop\3085733111DSCT1U2\14add.fm] masterpage:Right2:1 01cov.book Page 117 Monday, September 29, 2003 11:15 AM

When playing back moving images

182960min 160 101 3 101 8/804VOL. 00:00:12 5 qa 6 qs qd qf A Image size indicator (70) B Recording mode indicator (70) C Playback indicator (71) D Volume indicator (71) E Change folder indicator (60) F Playback folder indicator (60) G Image number H Recording folder indicator (45) I Number of images recorded in selected folder J Remaining “Memory Stick” capacity indicator K Counter (71) L Playback image (71) M Playback bar (71) N Menu/Guide menu (43) Page numbers in parentheses indicate the • Pressing MENU switches the menu on/off. location of additional important information. Additional information, filename[C:\Documents and Settings\gotanda\Desktop\3085733111DSCT1U2\01covIX.fm] masterpage:Left 01cov.book Page 118 Monday, September 29, 2003 11:15 AM

Index

Contrast ... 103 I

Index Control button ... 16 Image quality ... 44

Copying images to your Image size ... 20, 21, 100

A computer ... 80, 81, 82, 86 Image Transfer ... 77

Cutting movies ... 74 AC Adaptor ... 11, 15 ImageMixer ... 78 Access lamp ... 19 Index screen ... 36 AE/AF lock ... 22, 24, 49 D “InfoLITHIUM” battery pack ... 111 AF illuminator ... 30, 106 DC plug ... 11, 15 Inserting “Memory Stick Duo” ... 19 AF lock ... 49 Deleting movies ... 72 Install ... 76, 77, 78 AF Mode ... 48 Deleting still images ... 39 ISO ... 102 AF range finder frame ... 47 Digital zoom ... 26 Auto adjustment mode ... 22 Divide ... 74 J Auto Focus ... 24, 47 DPOF ... 68 Jog playback ... 65 Auto power-off function ... 16 JPG ... 84 Auto Review ... 106 E A/V connecting cable ... 37 E-mail ... 57 L Enlarging an image ... 61 LCD backlight on/off ... 25

B EV adjustment ... 50 LCD screen brightness ... 107

Battery life ... 14, 111 Exposure Bracket ... 52 Battery remaining indicator ... 13, 111 M Beep/shutter sound ... 107 F Macro ... 27 Burst ... 55 File names ... 83 Memory Stick Duo ... 19, 109 File storage destinations ... 83 Menu settings ... 43, 102

C Flash ... 29 Metering mode ... 52

CD-ROM ... 75 Flash Level ... 55 Mode switch ... 9, 17, 23 Center AF ... 47 Focus preset ... 49 Moisture condensation ... 108 Charging battery pack ... 11, 111 Folder ... 45, 60 Monitoring AF ... 48 Charging time ... 13 Format ... 41 MPG ... 84 Cleaning ... 108 Framing priority burst ... 55 Multi Burst ... 56, 64 Clock Set ... 17, 44, 107 Multi-pattern metering ... 52 Close-ups (Macro) shooting ... 27 H Multipoint AF ... 47 Continuous AF ... 48 Histogram ... 51 Continuous shooting four images ... 55, filename[C:\Documents and Settings\gotanda\Desktop\3085733111DSCT1U2\01covIX.fm] masterpage:Right 01cov.book Page 119 Monday, September 29, 2003 11:15 AM

N S V

NR slow shutter ...34 Saturation ... 103 VGA ... 21, 100 NTSC system ...38, 107 Scene Selection ... 32 Viewing images on TV ... 37 Number of images that can be shot Screen display ... 25, 114 Viewing images on your computer ... 87 or viewed ...14, 21, 100 Self-diagnosis display ... 99 Viewing movies on the LCD screen ... 71 Self-timer ... 28 Viewing still images on the LCD screen ... 35

P Setting date and time ... 17, 107 Voice ... 58

PAL system ...38, 107 Setup ... 44, 106 Picture effect ...58 Sharpness ... 103 W Playback zoom ...61 Shooting movies ... 70 Warnings and messages ... 97 Power on/off ...16 Shooting still images ... 22 White Balance ... 54 Precautions ...108 Single AF ... 48 Precision digital zoom ...26 Single screen ... 35 Z Print (DPOF) mark ...68 Slide show ... 62 Program auto shooting mode ...23 Smart Zoom ... 26 Zoom ... 25 Protect ...66 Speed priority burst ... 55 PTP ...75, 86, 107 Spot AF ... 47 Spot metering ... 52 Superimposing date and time ... 30, 106

Q

Quick Review ...24 T Trimming ... 62

R TV color system ... 38

Red Eye Reduction ...29 Remaining shooting/viewing time ...14, 100 U RESET button ...88 Resize ...67 USB connection ... 79, 107 Rotate ...63 USB cradle ... 10 USB driver ... 76, 86 USB jack ... 10, 79 USB mode ... 75, 86 Using your camera abroad ... 15 Index, filename[C:\Documents and Settings\gotanda\Desktop\3085733111DSCT1U2\010bco.fm] 01cov.book Page 120 Monday, September 29, 2003 11:15 AM Printed on 100% recycled paper using VOC (Volatile Organic Compound)-free vegetable oil based ink. Additional information on this product and answers to frequently asked questions can be found at our Customer Support Website. Sony Corporation Printed in Japan,

DSC-T1

LEVEL 1

SERVICE MANUAL US ModelCanadian Model AEP Model Ver 1.1 2004.03 UK Model E Model Hong Kong Model Australian Model Korea Model Chinese Model Tourist Model Japanese Model SUPPLEMENT-1

File this supplement-1 with the service manual. (PV03-016) • Addition of Black Model. : Added portion. Page Before change After change Checking supplied accessories. UC-TA USB cradle (1) Wrist strap (1) UC-TA USB cradle (1) Wrist strap (1) 1-817-742-11 3-086-283-01 1-817-742-11 (SILVER) 3-086-283-01 (SILVER) 1-817-742-21 (BLACK) 3-086-283-11 (BLACK) 2004C1600-1 ©2004.3 9-876-280-82 Sony EMCS Co. Published by DI CS Strategy Div.,

DSC-T1

LEVEL 1

SERVICE MANUAL US ModelCanadian Model AEP Model Ver 1.2 2004.03 UK Model E Model Hong Kong Model Australian Model Korea Model Chinese Model Tourist Model Japanese Model SUPPLEMENT-2

File this supplement-2 with the service manual. (PV03-018) • Change of parts number. • Addition of Accessory. : Changed portion. : Added portion. Page Before change After change Checking supplied accessories. CD-ROM CD-ROM (USB Driver SPVD-013) (1) (USB Driver SPVD-013) (1) (AEP, UK, E, HK, AUS, CH, (AEP, UK, E, HK, AUS, CH, JE, KR model) JE, KR model) 3-087-330-01 3-087-330-11 CD-ROM CD-ROM (USB Driver SPVD-013 (I)) (1) (USB Driver SPVD-013 (I)) (1) 3 (US, CND, J model) (US, CND, J model) 3-087-331-01 3-087-331-11 UPDATE CD-ROM (PB), T1 3-091-965-01 2004C1600-1 ©2004.3 9-876-280-85 Sony EMCS Co. Published by DI CS Strategy Div.,

Reverse 987628043.pdf Revision History

Ver. Date History Contents S.M. Rev. issued 1.0 2003.10 Official Release — — 1.1 2004.03 Supplement-1 Addition of Black Model No 1.2 2004.03 Supplement-2 • Change of parts number. No • Addition of Accessory.]
15

Similar documents

• Change of Automatic Adjustment Program • Change of Message for Destination Data
DSC-T100 Auto-ADJ SERVICE MANUAL Ver. 1.1 2007.04 SUPPLEMENT-1 File this supplement with the service manual. (DI07-003) • Change of Automatic Adjustment Program • Change of Message for Destination Data Write • Addition of [Read], [Save], and [Load] buttons to Angular Velocity Sensitivity Adjustment
CAUTION Danger of explosion if battery is incorrectly replaced.
DSC-T10 SERVICE MANUAL LEVEL 3 US Model Ver 1.1 2006.09 Canadian Model Revision History AEP Model UK Model How to use E Model Acrobat Reader Australian Model Hong Kong Model Chinese Model Internal memory Korea Model ON BOARD Argentine Model Brazilian Model Japanese Model Photo: Silver Tourist Model
SPECIFICATIONS Camera [Input and Output connectors] BC-CS3 battery charger
DSC-T10 SERVICE MANUAL LEVEL 2 US Model Ver 1.0 2006.07 Canadian Model Revision History AEP Model UK Model How to use E Model Acrobat Reader Australian Model Hong Kong Model Chinese Model Internal memory ON BOARD Korea Model Argentine Model Japanese Model Tourist Model Photo: Silver Link SPECIFICATI
SPECIFICATIONS Camera [Input and Output connectors] BC-CSG/BC-CSGB/BC-CSGC
DSC-T100 SERVICE MANUAL LEVEL 2 US Model Ver. 1.0 2007.02 Canadian Model Revision History AEP Model UK Model How to use E Model Acrobat Reader Australian Model Hong Kong Model Chinese Model Internal memory Korea Model ON BOARD Brazilian Model Japanese Model Tourist Model Photo: Silver Link SPECIFICA
WARNING To prevent fire or shock hazard, do
DSC-T11 SERVICE MANUAL LEVEL 1 Differences Manual DSC-T11 AEP Model UK Model E Model Ver 1.1 2004. 09 Hong Kong Model Australian Model Revision History Korea Model Chinese Model Tourist Model Japanese Model • This Service Manual shows only the difference from DSC-T1. Refer to the Service Manual Leve
WARNING To prevent fire or shock hazard, do
DSC-T11 SERVICE MANUAL LEVEL 1 Differences Manual DSC-T11 AEP Model UK Model E Model Ver 1.0 2004. 04 Hong Kong Model Australian Model Revision History Korea Model Chinese Model Tourist Model Japanese Model • This Service Manual shows only the difference from DSC-T1. Refer to the Service Manual Leve
SPECIFICATIONS Camera [Input and Output connectors] BC-CSG/BC-CSGB/BC-CSGC
DSC-T20/T25 SERVICE MANUAL LEVEL 2 US Model Ver 1.0 2007.03 Canadian Model Revision History AEP Model UK Model How to use E Model Acrobat Reader Australian Model Hong Kong Model Chinese Model Internal memory Korea Model ON BOARD Argentine Model Brazillian Model Japanese Model Photo: Silver Tourist M
Model information table
DSC-T20/T25 SERVICE MANUAL LEVEL 3 US Model Ver 1.0 2007.03 Canadian Model Revision History AEP Model UK Model How to use E Model Acrobat Reader Australian Model Hong Kong Model Chinese Model Internal memory Korea Model ON BOARD Argentine Model Brazillian Model Japanese Model Photo: Silver Tourist M
DSC-T3 SERVICE MANUAL LEVEL 2 DSC-T3
DSC-T3 SERVICE MANUAL LEVEL 2 DSC-T3 Ver 1.0 2004. 09 US Model AEP Model Revision History UK Model E Model Hong Kong Model Australian Model How to use Chinese Model Acrobat Reader Japanese Model Korea Model Tourist Model Link SPECIFICATIONS BLOCK DIAGRAMS PRINTED WIRING BOARDS SERVICE NOTE FRAME SCH
DSC-T3 SERVICE MANUAL LEVEL 1 DSC-T3 Ver 1.0 2004. 09 US Model Revision History UK Model Link SPECIFICATIONS ACCESSORIES SELF DIAGNOSIS FUNCTION
DSC-T3 SERVICE MANUAL LEVEL 1 DSC-T3 Ver 1.0 2004. 09 US Model AEP Model Revision History UK Model E Model Hong Kong Model Australian Model Chinese Model Japanese Model Korea Model Tourist Model Link SPECIFICATIONS ACCESSORIES SELF DIAGNOSIS FUNCTION • INSTRUCTION MANUAL is shown at the end of this
DSC-T3 SERVICE MANUAL LEVEL 2 DSC-T3
DSC-T3 SERVICE MANUAL LEVEL 2 DSC-T3 Ver 1.2 2005. 09 US Model AEP Model Revision History UK Model E Model Hong Kong Model Australian Model How to use Chinese Model Acrobat Reader Japanese Model Korea Model Tourist Model Link SPECIFICATIONS BLOCK DIAGRAMS PRINTED WIRING BOARDS SERVICE NOTE FRAME SCH
DSC-T3 SERVICE MANUAL LEVEL 2 DSC-T3
DSC-T3 SERVICE MANUAL LEVEL 2 DSC-T3 Ver 1.1 2005. 04 US Model AEP Model Revision History UK Model E Model Hong Kong Model Australian Model How to use Chinese Model Acrobat Reader Japanese Model Korea Model Tourist Model Link SPECIFICATIONS BLOCK DIAGRAMS PRINTED WIRING BOARDS SERVICE NOTE FRAME SCH
DSC-T3 SERVICE MANUAL LEVEL 1 DSC-T3 Ver 1.2 2005. 09 US Model Revision History AEP Model Link
DSC-T3 SERVICE MANUAL LEVEL 1 DSC-T3 Ver 1.2 2005. 09 US Model Canadian Model Revision History AEP Model UK Model E Model Hong Kong Model Australian Model Chinese Model Japanese Model Korea Model Tourist Model Link SPECIFICATIONS ACCESSORIES SELF DIAGNOSIS FUNCTION • INSTRUCTION MANUAL is shown at t
DSC-T3 SERVICE MANUAL LEVEL 1 DSC-T3 Ver 1.1 2005. 04 US Model Revision History UK Model Link SPECIFICATIONS ACCESSORIES SELF DIAGNOSIS FUNCTION
DSC-T3 SERVICE MANUAL LEVEL 1 DSC-T3 Ver 1.1 2005. 04 US Model AEP Model Revision History UK Model E Model Hong Kong Model Australian Model Chinese Model Japanese Model Korea Model Tourist Model Link SPECIFICATIONS ACCESSORIES SELF DIAGNOSIS FUNCTION • INSTRUCTION MANUAL is shown at the end of this
SPECIFICATIONS Camera [LCD screen] BC-CS3 battery charger
DSC-T30 SERVICE MANUAL LEVEL 2 US Model Ver 1.0 2006.03 Canadian Model Revision History AEP Model UK Model How to use E Model Acrobat Reader Australian Model Hong Kong Model Chinese Model Internal memory ON BOARD Korea Model Brazilian Model Japanese Model Tourist Model Photo: Silver Link SPECIFICATI
DSC-T5 SERVICE MANUAL LEVEL 1 US Model UK Model E Model Australian Model Hong Kong Model Chinese Model Korea Model Brazilian Model Japanese Model Tourist Model
DSC-T5 SERVICE MANUAL LEVEL 1 US Model Ver 1.2 2005.10 Canadian Model Revision History AEP Model UK Model E Model Australian Model Hong Kong Model Chinese Model Korea Model Brazilian Model Japanese Model Photo: Silver Tourist Model Link SPECIFICATIONS ACCESSORIES INSTRUCTION MANUAL SERVICE NOTE The
DSC-T5 SERVICE MANUAL LEVEL 2
DSC-T5 SERVICE MANUAL LEVEL 2 US Model Ver 1.2 2005.10 Canadian Model Revision History AEP Model UK Model How to use E Model Acrobat Reader Australian Model Hong Kong Model Internal memory Chinese Model ON BOARD Korea Model Brazilian Model Photo: Silver Japanese Model Tourist Model Link SPECIFICATIO
SPECIFICATIONS Camera [Input and Output connectors] BC-CS3 battery charger
DSC-T50 SERVICE MANUAL LEVEL 2 US Model Ver 1.0 2006.09 Canadian Model Revision History AEP Model UK Model E Model How to use Australian Model Acrobat Reader Hong Kong Model Chinese Model Korea Model Internal memory Argentine Model ON BOARD Brazilian Model Japanese Model Tourist Model Photo: Silver
DSC-T7 SERVICE MANUAL LEVEL 2 DSC-T7
DSC-T7 SERVICE MANUAL LEVEL 2 DSC-T7 Ver 1.1 2005. 06 US Model Canadian Model Revision History AEP Model UK Model E Model Hong Kong Model How to use Australian Model Acrobat Reader Chinese Model Japanese Model Brazilian Model Argentina Model Korea Model Tourist Model Link SPECIFICATIONS BLOCK DIAGRA
DSC-T7 SERVICE MANUAL LEVEL 1 DSC-T7 Ver 1.2 2005. 09 US Model
DSC-T7 SERVICE MANUAL LEVEL 1 DSC-T7 Ver 1.2 2005. 09 US Model Canadian Model Revision History AEP Model UK Model E Model Hong Kong Model Australian Model Chinese Model Japanese Model Brazilian Model Argentina Model Korea Model Tourist Model Link SPECIFICATIONS ACCESSORIES SELF DIAGNOSIS FUNCTION •
DSC-T7 SERVICE MANUAL LEVEL 2 DSC-T7
DSC-T7 SERVICE MANUAL LEVEL 2 DSC-T7 Ver 1.2 2005. 09 US Model Canadian Model Revision History AEP Model UK Model E Model Hong Kong Model How to use Australian Model Acrobat Reader Chinese Model Japanese Model Brazilian Model Argentina Model Korea Model Tourist Model Link SPECIFICATIONS BLOCK DIAGRA
DSC-T9 SERVICE MANUAL LEVEL 2
DSC-T9 SERVICE MANUAL LEVEL 2 US Model Ver 1.1 2005.12 Canadian Model Revision History AEP Model UK Model How to use E Model Acrobat Reader Australian Model Hong Kong Model Internal memory Chinese Model ON BOARD Korea Model Brazilian Model Japanese Model Photo: Silver Tourist Model Link SPECIFICATIO
DSC-T9 US Model SERVICE MANUAL Canadian Model AEP Model E Model Australian Model Hong Kong Model Chinese Model Korea Model Brazilian Model SUPPLEMENT-1 Japanese Model
DSC-T9 LEVEL 3 US Model SERVICE MANUAL Canadian Model AEP Model Ver 1.1 2005.12 UK Model E Model Australian Model Hong Kong Model Chinese Model Korea Model Brazilian Model SUPPLEMENT-1 Japanese Model Tourist Model File this supplement with the service manual. (PV05-072) • Addition of Brazilian Model
DSC-T9 SERVICE MANUAL Canadian Model SUPPLEMENT-1 Japanese Model
DSC-T9 LEVEL 2 US Model SERVICE MANUAL Canadian Model AEP Model Ver 1.1 2005.12 UK Model E Model Australian Model Hong Kong Model Chinese Model Korea Model Brazilian Model SUPPLEMENT-1 Japanese Model Tourist Model File this supplement with the service manual. (PV05-072) • Addition of Brazilian Model
DSC-T9 SERVICE MANUAL LEVEL 2
DSC-T9 SERVICE MANUAL LEVEL 2 US Model Ver 1.2 2006.06 Canadian Model Revision History AEP Model UK Model How to use E Model Acrobat Reader Australian Model Hong Kong Model Internal memory Chinese Model ON BOARD Korea Model Brazilian Model Japanese Model Photo: Silver Tourist Model Link SPECIFICATIO
If you have any questions about this product, you may call: Note:
DSC-U20 SERVICE MANUAL LEVEL 1 US Model Ver 1.0 2002. 10 Canadian Model Revision History AEP Model UK Model E Model Hong Kong Model Australian Model Chinese Model Korea model Photo: SILVER model Tourist Model Japanese Model Link SPECIFICATIONS SELF DIAGNOSIS FUNCTION ORNAMENTAL PARTS • INSTRUCTION M
If you have any questions about this product, you may call: Note:
DSC-U20 SERVICE MANUAL LEVEL 1 US Model Ver 1.1 2003. 01 Canadian Model Revision History AEP Model UK Model E Model Hong Kong Model Australian Model Chinese Model Korea model Photo: SILVER model Tourist Model Japanese Model Link SPECIFICATIONS SELF DIAGNOSIS FUNCTION ORNAMENTAL PARTS • INSTRUCTION M
For the Customers in the U.S.A. Notice for the customers in the Notice
DSC-U30 SERVICE MANUAL LEVEL 1 US Model Ver 1.0 2003. 05 Canadian Model Revision History AEP Model UK Model E Model Hong Kong Model Australian Model Chinese Model Korea model Tourist Model Photo: SILVER model Japanese Model Link SPECIFICATIONS SELF DIAGNOSIS FUNCTION ORNAMENTAL PARTS • INSTRUCTION M
For the Customers in the U.S.A. Notice for the customers in the Notice
DSC-U40 SERVICE MANUAL LEVEL 1 US Model Ver 1.0 2003. 10 Canadian Model Revision History AEP Model UK Model E Model Hong Kong Model Australian Model Chinese Model Korea Model Tourist Model Photo: Silver Japanese Model Link SPECIFICATIONS SELF DIAGNOSIS FUNCTION ORNAMENTAL PARTS • INSTRUCTION MANUAL
For the Customers in the U.S.A. Notice for the customers in the Notice
DSC-U40 SERVICE MANUAL LEVEL 1 US Model Ver 1.1 2004.03 Canadian Model Revision History AEP Model UK Model E Model Hong Kong Model Australian Model Chinese Model Korea Model Tourist Model Photo: Silver Japanese Model Link SPECIFICATIONS SELF DIAGNOSIS FUNCTION ORNAMENTAL PARTS • INSTRUCTION MANUAL i