Download: WARNING To prevent fire or shock hazard, do

DSC-T11 SERVICE MANUAL LEVEL 1 Differences Manual DSC-T11 AEP Model UK Model E Model Ver 1.1 2004. 09 Hong Kong Model Australian Model Revision History Korea Model Chinese Model Tourist Model Japanese Model • This Service Manual shows only the difference from DSC-T1. Refer to the Service Manual Level1 (9-876-280-41) of DSC-T1 also for repair. • INSTRUCTION MANUAL is shown at the end of this document. DIGITAL STILL CAMERA DSC-T11 SPECIFICATIONS xCamera xAC-LM5 AC Adaptor [System] [General] Power requirements Image device Used battery pack 100 to 240 V AC, 50/60 Hz 7.66 mm (1/2.4 type) color CCD...
Author: 阿由葉 Shared: 8/19/19
Downloads: 513 Views: 1028

Content

DSC-T11 SERVICE MANUAL LEVEL 1 Differences Manual DSC-T11

AEP Model UK Model E Model

Ver 1.1 2004. 09 Hong Kong Model

Australian Model Revision History Korea Model Chinese Model Tourist Model Japanese Model • This Service Manual shows only the difference from DSC-T1. Refer to the Service Manual Level1 (9-876-280-41) of DSC-T1 also for repair. • INSTRUCTION MANUAL is shown at the end of this document.

DIGITAL STILL CAMERA

,

DSC-T11 SPECIFICATIONS

xCamera xAC-LM5 AC Adaptor [System] [General] Power requirements Image device Used battery pack 100 to 240 V AC, 50/60 Hz 7.66 mm (1/2.4 type) color CCD NP-FT1 Current consumption Primary color filter Power requirements 0.2 A Total pixels number of camera 3.6 V Power consumption Approx. 5 255 000 pixels 10 WPower consumption (during shooting) Effective pixels number of camera 1.6 W Rated output voltage Approx. 5 090 000 pixels 4.2 V DC, 1.5 A Operating temperature Lens Carl Zeiss Vario-Tessar 0°C to +40°C (+32°F to +104°F) Operating temperature 3 zoom lens 0°C to +40°C (+32°F to +104°F) Storage temperature f = 6.7 – 20.1 mm (38 – 114 mm when Storage temperature converted to a 35 mm still camera) –20°C to +60°C (–4°F to +140°F) –20°C to +60°C (–4°F to +140°F) F3.5 – 4.4 Dimensions Dimensions Exposure control 102.5◊601 7.3 mm Approx. 473080 mm Automatic exposure, Scene selection (4 1/82 3/811/16 inches) (W/H/D, excluding maximum (1 7/81 3/163 1/4 inches) (8 modes) protrusions) (W/H/D, excluding projecting parts) White balance Mass Approx. 186 g (6.6 oz) (including Mass Approx. 170 g (6.0 oz) excluding Automatic, Daylight, Cloudy, Fluorescent, Incandescent, Flash battery pack NP-FT1, “Memory Stick power cord (mains lead) Duo” and wrist strap) File format (DCF compliant) xNP-FT1 battery pack Still images: Exif Ver. 2.2 JPEG Built-in microphone Electret condenser microphone Used battery compliant, DPOF compatible Lithium-ion battery Audio with still image: MPEG1 Built-in speaker compliant (Monaural) Piezo-electric speaker Maximum voltage Movies: MPEG1 compliant DC 4.2 V Exif Print Compatible (Monaural) Nominal voltage PRINT Image Matching II Compatible Recording media DC 3.6 VPictBridge Compatible “Memory Stick Duo” Capacity 2.4 Wh (680 mAh) Flash Recommended distance (ISO set to Auto): xUC-TB USB cradle xAccessories 0.3 m to 1.5 m (11 7/8 inches to [Input and Output connectors] • AC-LM5 AC Adaptor (1) 59 1/8 inches) (W) A/V OUT (MONO) jack (Monaural) 0.5 m to 1.5 m (19 3/4 inches to Minijack • Power cord (mains lead) (1) 59 1/8 inches) (T) Video: 1 Vp-p, 75 Ω, unbalanced, • UC-TB USB cradle (1) [Input and Output connectors] sync negative • USB cable (1) Audio: 327 mV (at a 47 kΩ load) Multi connector • NP-FT1 battery pack (1)Output impedance 1 kΩ • A/V connecting cable (1) USB jack B [LCD screen] • Wrist strap (1)USB connection LCD panel High-Speed USB • Carrying case (1) 6.2 cm (2.5 type) TFT drive (USB 2.0 High-Speed compatible) • “Memory Stick Duo” (32 MB) (1) Total number of dots DC IN jack • Memory Stick Duo Adaptor (1) 211 200 (960220) dots Camera connector • CD-ROM (USB driver SPVD-013) (1) • Operating instructions (1) Design and specifications are subject to change without notice.

CAUTION : Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. SAFETY-RELATED COMPONENT WARNING!! COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE WITH MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY.

— 2 —,

DSC-T11 Ver 1.1 2004. 09

Checking supplied accessories. Make sure that the following accessories are supplied with your camcorder. Power cord (Main lead) (1) AC-LM5 AC Adaptor (1) UC-TB USB cradle (1) USB cable (1) (AUS model) 0 1-477-488-12 1-818-572-11 1-828-073-11 0 1-696-819-11 Power cord (Main lead) (1) (AEP, E model) 0 1-823-946-11 Power cord (Main lead) (1) (CH model) 0 1-782-476-13 Power cord (Main lead) (1) CD-ROM A/V connecting cable (1) Wrist strap (1) (UK, HK model) (USB Driver SPVD-013) (1) 1-824-111-11 3-086-283-01 0 1-783-374-11 (AEP, UK, E, HK, AUS, CH, Power cord (Main lead) (1) JE, KR model) (JE model) 3-087-330-01 0 1-790-732-12 CD-ROM Power cord (Main lead) (1) (USB Driver SPVD-013 (I)) (1) (J model) (J model) 0 1-791-637-13 3-087-331-01 Power cord (Main lead) (1) 2-pin conversion adaptor (1) 2-pin conversion adaptor (1) (KR model) (JE model) (E, HK model) 0 1-776-985-11 1-569-007-12 1-569-008-12 • Abbreviation AUS : Australian model CH : Chinese model NP-FT1 battery pack (1) “Memory stick Duo” (1) Memory stick Duo Adaptor(1) HK : Hong Kong model (not supplied) (MSA-M32A) (MSAC-M2) KR : Korea model (not supplied) (not supplied) JE : Tourist model J : Japanese model

Other accessories

2-050-819-01 MANUAL, INSTRUCTION SET (JAPANESE) (J) 2-050-819-81 MANUAL, INSTRUCTION SET (KOREAN) (JE, KR) 2-050-819-11 MANUAL, INSTRUCTION SET (ENGLISH) (EXCEPT KR, J) 2-050-820-01 MANUAL, INSTRUCTION (for PC)(JAPANESE) (J) 2-050-819-31 MANUAL, INSTRUCTION SET (SPANISH/PORTUGUESE) 2-102-625-01 CASE, CARRYING (AEP, E, JE) 2-050-819-51 MANUAL, INSTRUCTION SET Note : The components identified by mark 0 or dotted (TRADITIONAL CHINESE/SIMPLIFIED CHINESE) (E, HK, CH, JE) line with mark 0 are critical for safety. 2-050-819-71 MANUAL, INSTRUCTION SET (ARABIC) (E) Replace only with part number specified.

SAFETY CHECK-OUT

After correcting the original service problem, perform the following safety checks before releasing the set to the customer. 1. Check the area of your repair for unsoldered or poorly-soldered of deterioration. Point them out to the customer and connections. Check the entire board surface for solder splashes recommend their replacement. and bridges. 5. Check the B+ voltage to see it is at the values specified. 2. Check the interboard wiring to ensure that no wires are 6. Flexible Circuit Board Repairing "pinched" or contact high-wattage resistors. • Keep the temperature of the soldering iron around 270˚C 3. Look for unauthorized replacement parts, particularly during repairing. transistors, that were installed during a previous repair. Point • Do not touch the soldering iron on the same conductor of the them out to the customer and recommend their replacement. circuit board (within 3 times). 4. Look for parts which, through functioning, show obvious signs • Be careful not to apply force on the conductor when soldering or unsoldering. — 3 —,

DSC-T11 Sony EMCS Co. 2004I1600-19-876-747-41 ©2004.9

— 4 — Published by DI Technical Support Section, 2-050-819-11(1) Getting started_ Shooting still images_

Digital Still Camera Viewing still images _ Operating Instructions Deleting still images _

Before operating the unit, please read this manual thoroughly, and retain it for future reference. Before advanced operations _

Owner’s Record

Advanced still image shooting _ The model and serial numbers are located on the bottom. Record the serial number in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. Advanced still image viewing _ Model No. DSC-T11 Still image editing _ Serial No. Still image printing _ (PictBridge printer) Enjoying movies _ Enjoying images on your computer_ Troubleshooting _

DSC-T11 Additional information_

Index _ © 2004 Sony Corporation,

WARNING

To prevent fire or shock hazard, do not expose the unit to rain or moisture. “Memory Stick”

N50

Notice • If static electricity or electromagnetism causes data transfer to discontinue midway (fail), restart the application or disconnect and connect the USB cable again. • Certain countries and regions may regulate disposal of the battery used to power this product. Please consult with your local authority.,

Before using your camera

Trial recording Do not shake or strike the camera Before you record one-time events, you may want In addition to malfunctions and inability to record Carl Zeiss lens to make a trial recording to make sure that the images, this may render the “Memory Stick Duo” This camera is equipped with a Carl Zeiss lens camera is working correctly. unusable or image data breakdown, damage or which is capable of reproducing sharp images loss may occur. with excellent contrast. No compensation for contents of the The lens for this camera has been produced recording LCD screen, LCD finder (only models under a quality assurance system certified by Carl Zeiss in accordance with the quality Contents of the recording cannot be compensated with an LCD finder) and lens standards of Carl Zeiss in Germany. for if recording or playback is not possible due to • The LCD screen and the LCD finder are a malfunction of your camera or recording media, manufactured using extremely high-precision Clean the flash surface before use etc. technology so over 99.99% of the pixels are The heat of flash emission may cause dirt on the operational for effective use. However, there Back up recommendation flash surface to become discolored or to stick to may be some tiny black points and/or bright the flash surface, resulting in insufficient light To avoid the potential risk of data loss, always points (white, red, blue or green in color) that emission. copy (back up) data to a disk. constantly appear on the LCD screen and the LCD finder. These points are normal in the Notes on image data compatibility Do not get the camera wetmanufacturing process and do not affect the When taking pictures outdoors in the rain or • This camera conforms with the Design rule for recording in any way. under similar conditions, be careful not to get the Camera File system universal standard • Be careful when placing the camera near a camera wet. Water entering the inside of the established by the JEITA (Japan Electronics window or outdoors. Exposing the LCD screen, camera may cause malfunctions which in some and Information Technology Industries the finder or the lens to direct sunlight for long cases may not be repairable. If moisture Association). periods may cause malfunctions. condensation occurs, see page 116 and follow the • Playback of images recorded with your camera • Do not press the LCD screen hardly. The screen instructions on how to remove it before using the on other equipment and playback of images may be uneven and that may cause a camera. recorded or edited with other equipment on malfunction. your camera are not guaranteed. • Do not press the lens portion hard, or it may Do not expose the camera to sand or Precaution on copyright cause the malfunction of the lens. dust• Images may be trailed on the LCD screen in a Television programs, films, video tapes, and other Using the camera in sandy or dusty locations may cold location. This is not a malfunction. materials may be copyrighted. Unauthorized cause malfunction. recording of such materials may be contrary to Do not aim the camera at the sun or the provision of the copyright laws. other bright light This may cause irrecoverable damage to your eyes. Or it may cause the malfunction of your camera.,

Note on the camera locations • Pentium is a trademark or a registered

Do not use the camera near a location that trademark of Intel Corporation. generates strong radio wave or emits radiation. • In addition, system and product names used in The camera may not be able to record or play this manual are, in general, trademarks or back properly. registered trademarks of their respective developers or manufacturers. However, the ™

The pictures used in this manual or ® marks are not used in all cases in this

manual. The photographs used as examples of pictures in this manual are reproduced images, and are not actual images shot using this camera.

Trademarks

• “Memory Stick Duo” and are trademarks of Sony Corporation. • “Memory Stick PRO Duo” and are trademarks of Sony Corporation. • “MagicGate Memory Stick Duo” is a trademark of Sony Corporation. • “Memory Stick,” and “MagicGate Memory Stick” are trademarks of Sony Corporation. • “Memory Stick PRO” and are trademarks of Sony Corporation. • “MagicGate” and are trademarks of Sony Corporation. • “InfoLITHIUM” is a trademark of Sony Corporation. • Microsoft and Windows are registered trademarks of the U.S. Microsoft Corporation in the United States and other countries. • Macintosh, Mac OS and QuickTime are trademarks or registered trademarks of Apple Computer, Inc.,

Table of contents

Before using your camera ... 3 Selecting a flash mode ... 29 Advanced still image Identifying the parts ... 8 Inserting the date and time on a still Camera... 8 image... 30 shooting USB cradle... 10 Shooting according to scene conditions Choosing an auto focus method ...47 Connecting and disconnecting your — Scene Selection ... 32 Choosing a focus range finder frame camera ... 10 — AF range finder...47

Viewing still images Choosing a focus operation Getting started Viewing images on the LCD screen of your — AF Mode...48

Charging the battery pack ... 11 camera ... 35 Setting the distance to the subject Using the AC Adaptor ... 15 Viewing images on a TV screen... 37 — Focus preset ...49 Using your camera abroad ... 15 Adjusting the exposure Turning on/off your camera ... 16 Deleting still images — EV adjustment ...50 How to use the control button... 16 Deleting images ... 39 Displaying a histogram ...51 Setting the date and time... 17 Formatting a “Memory Stick Duo” ... 41 Selecting the metering mode...52 Shooting three images with the exposure

Shooting still images Before advanced operations shifted — Exposure Bracket...52

Inserting and removing a “Memory Stick Adjusting color tonesHow to setup and operate your Duo” ... 19 — White Balance ...54camera ... 43 Setting the still image size ... 20 Adjusting the flash levelChanging the menu settings ... 43 Image size ... 21 — Flash Level ...55Changing the items on the Basic still image shooting Shooting images continuouslySetup screen ... 44 — Using auto adjustment mode ... 22 — Burst ...55Deciding the still image quality... 44 Checking the last image you shot Shooting in Multi Burst modeCreating or selecting a folder ... 45 — Quick Review ... 24 — Multi Burst...56Creating a new folder ... 45 Indicators on the LCD screen during Shooting still images for e-mailChanging the recording folder ... 46 shooting ... 25 — E-Mail...57 Using the zoom feature... 25 Shooting still images with audio files Shooting close-ups — Voice...58 — Macro... 27 Adding special effects Using the self-timer ... 28 — Picture Effect ...58,

Advanced still image viewing Still image printing Troubleshooting

Selecting the folder and playing back (PictBridge printer) Troubleshooting ...95 images Connecting to a PictBridge printer ... 70 Warnings and messages ...105 — Folder...60 Preparing the camera ... 70 Self-diagnosis display ...107 Enlarging a portion of a still image...61 Connecting the camera to Enlarging an image the printer ... 70 Additional information — Playback zoom...61 Printing images ... 71 Number of images that can be saved or Recording an enlarged image Printing index-images... 73 shooting time...108 — Trimming ...62 Menu items ...110 Playing back successive images Enjoying movies Setup items ...114 — Slide Show...62 Shooting movies ... 77 Precautions ...116 Rotating still images Viewing movies on the LCD screen... 78 On “Memory Stick” ...117 — Rotate...63 Deleting movies ... 79 On “InfoLITHIUM” battery pack ...119 Playing back images shot in Multi Burst Editing movies ... 80 Specifications ...120 mode ...64 Cutting movies... 81 The LCD screen ...122 Playing back continuously ...64 Deleting unnecessary portions Playing back frame by frame ...65 of movies ... 81 Index

Still image editing Index...126Enjoying images on your

Protecting images computer — Protect ...66 Copying images to your computer Changing image size — For Windows users... 82 — Resize...67 Copying images to your computer Choosing images to print — For Macintosh users ... 93 — Print (DPOF) mark ...68,

Identifying the parts

See the pages in parentheses for details of operation. A POWER button (16) B POWER lamp (16)

Camera C Shutter button (22)

D Multi connector (13, 15) E Battery/“Memory Stick Duo” 1 cover2F“Memory Stick Duo” insertion 8 slot (19) 3 G Battery insertion slot (11) 9 H Microphone I Flash (29) q; J Lens K Self-timer lamp (28)/ AF illuminator (30, 114) qa 5 7, A For shooting: Zoom (W/T) button (25) For viewing: / (Playback18zoom) button (61)/ (Index) button (36) 29B/CHG lamp (orange) (12, 29) C LCD screen D MENU button (43, 110) E (Display/LCD backlight on/ Attaching the strap off) button (25) F Control button 4 Menu on: v/V/b/B/z (16) Menu off: / /7/ (29/28/24/27) 5 G RESET button (95) H Speaker I Mode switch (17, 110) : To shoot movies qa : To shoot still images : To view or edit images 7 qs J Hook for wrist strap K (Image Size/Delete) button (20, 39) L Access lamp (19),

USB cradle Connecting and disconnecting your camera

This is used when charging the battery pack How to connect How to disconnect or connecting the camera to a TV or a Connect the camera as illustrated. Grasp the camera and the USB cradle computer, etc. (supplied) as illustrated and disconnect the camera. • Make sure the camera is securely connected to the USB cradle. • Be sure to turn off the camera before you 3 connect the camera to the USB cradle or disconnect the camera from the USB cradle. • Do not disconnect the camera from the USB cradle during the USB connection, as the data may be corrupted. To cancel 4 the USB connection, see P on page 87 (Windows) or 1 on page 93 (Macintosh). A Camera connector B (USB) jack (86) C DC IN jack (11) D A/V OUT (MONO) jack (37),

Getting started Charging the battery pack

AC Adaptor USB cradle 2 DC IN jack1 3 DC plug , Open the battery/“Memory , Install the battery pack, then , Connect the AC Adaptor

Stick Duo” cover. close the battery/“Memory (supplied) to the DC IN jack of Stick Duo” cover. the USB cradle (supplied).

Slide the cover in the direction of the arrow. Make sure the battery pack is firmly Connect the plug with the v mark facing • Be sure to turn off your camera when inserted all the way, then close the cover. up. charging the battery pack (page 16). • Your camera operates with the “InfoLITHIUM” NP-FT1 battery pack (T type) Battery insertion slot • Do not short the DC plug of the AC Adaptor (supplied). You can use only T type battery Insert the battery pack so with a metallic object, as this may cause malfunction. pack (page 119). that the v marks on the side of the battery pack face the same direction as the v mark on the battery insertion slot. • Be careful not to drop the battery pack when installing it. Getting started, Disconnecting the AC Adaptor from 2 To a wall outlet the USB cradle (wall socket) Hold the DC plug itself and the USB cradle as illustrated and disconnect the cable. Power cord 4 (mains lead) 5 , Connect the power cord (mains , Connect the camera to the USB lead) to the AC Adaptor and to cradle. a wall outlet (wall socket). DC plug Connect the camera as illustrated. Make sure the camera is securely connected to the USB cradle. The /CHG lamp lights up when charging begins, and goes off when charging is completed. When charging is completed, remove the camera from the USB cradle. /CHG /CHG lamp,

To charge the battery pack To remove the battery pack Battery remaining indicator

only using the AC Adaptor The battery remaining indicator on the You can charge the battery pack without the upper left side of the LCD screen shows the USB cradle, such as during your travels. remaining shooting/viewing time and the Connect the DC plug of the AC Adaptor to battery remaining charge. the camera with v mark facing as Remaining indicator illustrated. AC Adaptor Multi To a wall outlet 60min connector (wall socket) Remaining time3 Open the battery/“Memory Stick Duo” • The displayed time remaining may not be cover, then hold the camera so that it faces correct under certain circumstances or downward and remove the battery pack. conditions. 1 2 Power cord • Be careful not to drop the battery pack when Charging time (mains lead) removing it. DC plug Approximate time to charge a completely discharged battery pack using the AC Adaptor at a temperature of 25°C (77°F). Charging time • Be sure to turn off your camera when Battery pack (min.) charging the battery pack (page 16). • When placing the camera, make sure the LCD NP-FT1 (supplied) Approx. 150 screen is facing up. • The charging time may become longer under • After charging the battery pack, disconnect the certain circumstances or conditions. AC Adaptor both from the multi connector of the camera and from a wall outlet (wall socket). Getting started,

Number of images and battery Shooting still images Shooting movies3)

life that can be recorded/ Under the average conditions1) NP-FT1 (supplied) viewed NP-FT1 (supplied) LCD Battery life The tables show the approximate number of Image LCD backlight (min.) images and the battery life that can be size back- No. of Battery life Continuous On Approx. 80images (min.) recorded/viewed when you shoot images in light shooting Off Approx. 100 normal mode with a fully charged battery On Approx. 170 Approx. 85 3)5M Shooting movies continuously with the image pack at a temperature of 25°C (77°F). The Off Approx. 200 Approx. 100 size [160] numbers of images that can be recorded or On Approx. 170 Approx. 85VGA viewed take into account changing the Off Approx. 200 Approx.100 • The number of images and the battery life that “Memory Stick Duo” as necessary. Note 1) can be recorded/viewed are decreased under the Shooting in the following situations: following conditions: that the actual numbers may be less than – (P.Quality) is set to [Fine] – The surrounding temperature is low indicated depending on the conditions of – Shooting one time every 30 seconds – The flash is used use. – The zoom is switched alternately between – The camera has been turned on and off many the W and T ends times – The flash strobes once every two times – The zoom is used frequently – The power turns on and off once every ten – [LCD Backlight] is set to [Bright] on the times Setup screen – [AF Mode] is set to [Single] on the Setup – The battery power is low. screen The battery capacity decreases as you use it more and more and as time passes

Viewing still images2) (page 120).

– [AF Mode] is set to [Monitor] or [Cont] on NP-FT1 (supplied) the Setup screen Image size No. of Battery life images (min.) 5M Approx. 2600 Approx. 130 VGA Approx. 2800 Approx. 140 2) Viewing single images in order at about three second intervals,

Using the AC Adaptor Using your camera

abroad AC Adaptor Power sources Multi connector 2 To wall outlet You can use your camera in any country or (wall socket) region with the AC Adaptor (supplied) within 100 V to 240 V AC, 50/60 Hz. Use a commercially available AC plug adaptor [a], if necessary, depending on the design of the wall outlet (wall socket) [b].1 Power cord AC-LM5 1 DC plug 2 (mains lead) , Connect the AC Adaptor , Connect the power cord (mains (supplied) to the multi lead) to the AC Adaptor and • Do not use an electronic transformer (travel connector of the camera. then to a wall outlet (wall converter), as this may cause a malfunction. socket). When placing the camera, make sure the LCD screen is facing up. Connect the plug with the mark facing • After using the AC Adaptor, disconnect it both v from the multi connector of the camera and up. from a wall outlet (wall socket). • The set is not disconnected from the AC power • Connect the AC Adaptor to an easily accessible source (mains) as long as it is connected to the wall outlet (wall socket) close by. If any trouble wall outlet (wall socket) even if the set itself has occurs while using the adaptor, immediately been turned off. shut off the power by disconnecting the plug from the wall outlet (wall socket). Getting started,

Turning on/off your camera How to use the

control button

Auto power-off function

POWER button If you do not operate the camera for about Program three minutes during shooting or viewing Auto POWER lamp Cameraor when performing the Setup, the WB ISO camera turns off automatically to prevent wearing down the battery. The auto power-off function only operates when Fine FINE the camera is operating using a battery Standard P.Quality pack. The auto power-off function also Mode BRK M PFX will not operate in the following , Press the POWER button. circumstances. To change the current settings of the • When viewing movies camera, bring up the menu or the Setup The POWER lamp (green) lights up and the • When playing back a slide show screen (page 44), and use the control button power is on. When you turn on your camera • When a connector is plugged into the to make the changes. for the first time, the Clock Set screen (USB) jack or the A/V OUT For each item, press v/V/b/B to select the appears (page 17). (MONO) jack with the camera desired value, then press z or v/V/b/B to connected to the USB cradle make the setting. Turning off the power Press the POWER button again. The POWER lamp goes out, and the camera turns off.,

Setting the date and time

Mode switch POWER button Clock Set Clock Set Y/M/D Y/M/D M/D/Y M/D/Y D/M/Y D/M/Y

POWER

2004 / 1 / 1 12 : 00 OK 2004 / 1 / 1 12 : 00 OK AM AM Cancel123, Set the mode switch to . , Press the POWER button to , Select the desired date display turn on the camera. format with v/V on the control • You can also carry out this operation when the button, then press z. mode switch is set to or . The POWER lamp (green) lights up and the • To change the date and time on the Setup Clock Set screen appears on the LCD Select from [Y/M/D] (year/month/day), screen, select [Clock Set] in (Setup 2) screen. 2 [M/D/Y] (month/day/year) or [D/M/Y] (pages 44 and 115), and perform the procedure from step . (day/month/year).3 • If the rechargeable button battery (page 117), which provides the power for saving the time data, ever becomes low, the Clock Set screen will appear again. When this happens, reset the date and time, by starting from step 3 above. Getting started, Clock Set Clock Set Clock Set Y/M/D Y/M/D Y/M/D M/D/Y M/D/Y M/D/Y D/M/Y D/M/Y D/M/Y 2004 / 1 / 1 12 : 00 OK 2005 / 1 / 1 10 : 00 OK 2005 / 1 / 1 10 : 30 OK AM AM AM Cancel Cancel Cancel456, Select the year, month, day, , Set the numeric value with v/V , Select [OK] with B on the hour or minute item you want on the control button, then control button, then press z. to set with b/B on the control press z to enter it. The date and time are entered and the clock button. After entering the number, v/V moves to starts to keep time. The item to be set is indicated with v/V. the next item. Repeat steps 4 and 5 until all of the items are set. • To cancel the date and time setting, select [Cancel] with v/V/b/B on the control button, then press z. • If you selected [D/M/Y] in step 3, set the time on a 24-hour cycle. • Midnight is indicated as 12:00 AM, and noon as 12:00 PM.,

Shooting still images Inserting and removing a “Memory Stick Duo”

Terminal side123Access lamp , Open the battery/“Memory , Insert the “Memory Stick Duo.” , Close the battery/“Memory

Stick Duo” cover. Stick Duo” cover.

Insert a “Memory Stick Duo” all the way in Slide the cover in the direction of the arrow. until it clicks as illustrated. To remove a “Memory Stick Duo” • When inserting a “Memory Stick Duo,” make Open the battery/“Memory Stick Duo” • When using this camera, the Memory Stick Duo Adaptor (supplied) is not sure of the direction and insert it all the way to cover, then push the “Memory Stick Duo” necessary. the connector. If the “Memory Stick Duo” is to pop it out. • Be careful not to drop the battery pack when not inserted correctly, you may not be able to opening or closing the battery/“Memory Stick record or display images with the “Memory • Whenever the access lamp is lit, the Duo” cover. Stick Duo.” And also it may result in camera is recording or reading an • For details on “Memory Stick Duo,” see malfunction of both the camera and “Memory image. Never open the battery/“Memory page 117. Stick Duo.” Stick Duo” cover or turn off the power at this time. The data may be corrupted. Shooting still images,

Setting the still image size

Mode switch 5M 5M 5M 3:2 3:2 3M 3M 1M 1M 1M VGA VGA Image Size Image Size123, Set the mode switch to , and , Press (Image Size). , Select the desired image size turn on the power. with v/V on the control button. The Image Size setup appears. The image size is set. • For details on the image size, see page 21. When the setting is complete, press (Image Size) so that the Image Size setup disappears from the LCD screen. • The image size selected here is maintained even when the power is turned off.,

Image size

You can choose image size (number of pixels) and image quality (compression Image size Usage guidelines ratio) based on the kind of images you want 5M1) (2592×1944) Large • For saving important images, printing in A4 size or to shoot. The larger you make the image printing A5 size high density images3:22) (2592×1728) size and the higher you make the image 3M (2048×1536) quality, the better your image, but also the larger the amount of data needed to preserve 1M (1280×960) • For printing in postcard size your image. This means you can save fewer • For recording a larger number of imagesVGA (640×480) images in your “Memory Stick Duo.” Small • For attaching images to e-mail or creating home pages Choose an image size and quality 1) The factory setting is [5M]. It is the highest image quality on this camera. 2) appropriately for the kind of images you Images are recorded in the same 3:2 aspect ratio as photograph printing paper or postcards, etc. want to shoot.

The number of images that can be saved in a “Memory Stick Duo”3)

• When images recorded using earlier Sony The number of images that can be saved in Fine (Standard)4) mode are shown below. models are played back on this camera, the display may differ from the actual image size. (Units: number of images) • When the images are viewed on the LCD Capacity screen of the camera, they all look the same 16MB 32MB 64MB 128MB MSX-M256 MSX-M512Image size size. • Number of shooting images can differ from 5M 6 (11) 12 (23) 25 (48) 51 (96) 92 (174) 188 (354) these values according to shooting conditions. 3:2 6 (11) 12 (23) 25 (48) 51 (96) 92 (174) 188 (354) • When the number of remaining shooting images is greater than 9999, the “>9999” 3M 10 (18) 20 (37) 41 (74) 82 (149) 148 (264) 302 (537) indicator appears on the LCD screen. 1M 24 (46) 50 (93) 101 (187) 202 (376) 357 (649) 726 (1320) • You can resize the images later (Resize VGA 97 (243) 196 (491) 394 (985) 790 (1975) 1428 (3571) 2904 (7261) function, see page 67). 3) When [Mode] (REC Mode) is set to [Normal] For the number of images that can be saved in other modes, see page 108. 4) For more information about the image quality (compression ratio), see page 44. Shooting still images,

Basic still image shooting — Using auto adjustment mode

60min Mode switch VGA FINE 101 S AF 30 F3.5 AE/AF lock indicator Flashes greent123Light up , Set the mode switch to , and , Hold the camera steadily with , Press and hold the shutter turn on the power. both hands and position the button halfway down. subject in the center of the The name of the folder where the image will The beep sounds but the image is not yet be recorded appears on the LCD screen for focus frame. recorded. When the AE/AF lock indicator approximately five seconds. Do not touch the lens portion, flash portion, changes from flashing to steadily lit, the or microphone (page 8) when you hold the camera is ready for shooting. • This camera can create new folders and select camera. (The LCD screen may be frozen for a split folders to be stored in the “Memory Stick Duo” second depending on the subject.) (page 45). • The minimum focal distance to a subject is approx. 50 cm (19 3/4 inches). • If you release the shutter button, shooting will To shoot subjects at distances closer than this, be canceled. use close-ups (Macro) mode (page 27). • When the camera does not beep, the AF adjustment is not complete. You can continue to shoot, but the AF is not set properly (except in Continuous AF, page 48).,

Mode switch (Magnifying glass mode) 60min VGA 101

95 (page 32)When you set the mode switch to , the functions that can be used change as follows (Twilight mode) (page 32) according to (Camera) in the menu. (Twilight portrait mode) (page 32) S AF (Landscape mode) (page 33) Program (Snow mode) (page 33) Auto 4 Camera (Beach mode) (page 33)Mode (High-speed shutter mode) , Press the shutter button fully Still image auto shooting [Auto] (page 33) down. The focus, exposure and white balance are (Fireworks mode) (page 33) automatically adjusted as needed to allow The shutter sounds. The image will be easy shooting. In addition, the image recorded in the “Memory Stick Duo.” When To switch the shooting methodquality is set to [Fine] (page 44), the AF “Recording” disappears from the LCD range finder frame is set to [Multi AF], and 1 Set the mode switch to . screen, you can shoot the next image. the metering mode is set to [Multi] 2 Press MENU. (pages 47 and 52). • The frame indicated on the LCD screen shows 3 Select (Camera) with b on the Only (Camera), [Mode] (REC Mode) the focus adjustment range (AF range finder, control button. page 47). and (Setup) appear in the menu. 4 Select the desired shooting mode with • When operating the camera using a battery v/V on the control button. pack, if you do not operate the camera for a Still image program shooting while during recording or playback, the camera [Program] turns off automatically to prevent wearing The necessary adjustments are made down the battery (page 16). automatically like still image auto shooting, but you can also change the focus and other adjustments as desired. In addition, you can also set the desired shooting functions using menus (pages 43 and 110). Shooting still images,

Checking the last image you

shot — Quick Review

Auto Focus There are two Auto Focus functions: “AF

60min VGA When you try to shoot a subject that is range finder frame” which sets the focus 101 8/8Review difficult to focus on, the AE/AF lock position according to the subject position indicator changes to flashing slowly. and size, and “AF mode” which sets the The Auto Focus function may have focus start/finish timing according to the difficulty working under the following AF response and the battery consumption. 101-0029 20041110:30PM

RETURN

conditions. In such cases, release the shutter See page 47 for details. button, then recompose the shot and focus again. • The subject is distant from the camera and dark. , Press b (7) on the control • The contrast between the subject and its background is poor. button. • The subject is seen through glass, such as To return to the normal shooting mode, a window. press lightly on the shutter button or press • A fast-moving subject. b (7) again. • The subject reflects or has a lustrous finish, such as a mirror or a luminous To delete the image displayed on the body. LCD screen • A flashing subject. • A backlit subject. 1 Press (Delete). 2 Select [Delete] with v on the control button, then press z. The image is deleted. • The image may appear rough right after playback starts due to the image processing.,

Indicators on the LCD screen during shooting Using the zoom feature

Indicators on W (wide-angle) T (telephoto) 60min VGA 101 96 60min VGA 101 60min VGA 101WT96WT96 x1.1 x5.0 S AF S AF S AF r Histogram on (Image information can also be displayed during playback.) Each time you press , the display 60min VGA 10196 , Press the zoom button to changes in the following order. choose the desired image size for shooting. • For a detailed description of the indicators, see page 122. • For a detailed description of the histogram, see S AF The minimum focal distance to the page 51. subject r • You can extend the battery remaining time by Indicators off Approx. 50 cm (19 3/4 inches) from the lens turning off the LCD backlight. surface • When shooting/viewing movies, the status of the LCD screen changes as follows: Indicators on t Indicators off t LCD backlight off • You cannot change the zoom scale while • This setting is maintained even when the power shooting movie. is turned off. S AF r LCD backlight off Shooting still images,

Zoom

The W side of this line is optical zoom, Image size Maximum zoom scale Your camera is equipped with zoom and the T side is digital zoom 3M 3.8× functions that enlarge the image using optical zoom and two types of digital 1M 6.1× processing. Digital zoom can be selected VGA 12× from smart zoom or precision digital zoom. When you purchase your camera, When digital zoom is set, the zoom method the image size is set to [5M]. Smart switches from optical zoom to digital zoom zoom cannot be used when the when the zoom scale exceeds 3×. image size is set to [5M] or [3:2], so To use only the optical zoom, set [Digital Zoom scaling indicator set a different image size. Zoom] to [Off] on the Setup screen (page 114). In this case, the digital zoom • The indicator differs according to the zoom • When using the smart zoom, the image on the area does not appear in the zoom scale type. LCD screen may look rough. However, this phenomenon has no effect on the recorded display bar on the LCD screen, and the – Optical zoom: image. maximum zoom is 3×. The enlargement – Smart zoom: • You cannot use the smart zoom in the Multi method and the zoom scale differ according – Precision digital zoom: • The AF range finder frame does not appear Burst mode. to the image size and the zoom type, so when using the digital zoom. The , or select the zoom to match the shooting indicators flashes, and AF operates with Precision digital zoom purpose. priority on subjects located near the center. All image sizes are enlarged up to a When digital zoom is set and you press the maximum 6×. This function cuts out and zoom button, the zoom scaling indicator Smart zoom enlarges a certain portion of the image, so appears on the LCD screen as follows. The image is enlarged with almost no the image quality deteriorates. To set distortion. This lets you use smart zoom precision digital zoom, set [Digital Zoom] with the same feeling as optical zoom. To to [Precision] on the Setup screen set smart zoom, set [Digital Zoom] to (page 114). [Smart] on the Setup screen (page 114). When you purchase your camera, it is set to smart zoom. The maximum zoom scale depends on the selected image size as follows.,

Shooting close-ups — Macro

• Using Spot AF is recommended (page 47). • To shoot at even closer distances than close-ups 60min VGA 10196 (Macro) recording, use (Magnifying glass mode) (page 32). S AF The close-ups (Macro) recording mode is , Set the mode switch to , and used when zooming up subjects such as press B ( ) on the control flowers or insects. Setting the zoom all the button. way to the W side lets you shoot subjects at distances as close as 8 cm. However, the The (macro) indicator appears on the minimum focus distance varies according LCD screen. to the zoom position. Therefore, shooting with the zoom set all the way to the W side • If the menu is currently displayed, press MENU is recommended. first so that the menu disappears. • You can also carry out this operation when the mode switch is set to . When the zoom is set all the way to • You cannot use this function when the W side: (Camera) in the menu is set to Approx. 8 cm (3 1/4 inches) from the lens (Magnifying glass mode), (Twilight mode), surface (Landscape mode) and (Fireworks mode). When the zoom is set all the way to the T side: Approx. 25 cm (9 7/8 inches) from the lens surface Shooting still images,

Using the self-timer

60min 60min VGA 101VGA 101 60min VGA FINE 101 95 96 96 S AF S AF S AF 30 F3.5212, Center the subject in the frame. , Set the mode switch to , and , Center the subject in the frame.

Press and hold the shutter press V ( ) on the control Press and hold the shutter

button halfway down, then button. button halfway down, then press the shutter button fully press the shutter button fully The (self-timer) indicator appears on the down. LCD screen. down. The self-timer lamp (page 8) flashes and a To return to normal recording mode • When recording with the self-timer, place the beep sounds after you press the shutter Press B ( ) on the control button again. camera in a stable location. If you place the The indicator disappears from the LCD camera in an unstable location for recording, button until the shutter operates screen. the camera may fall and become damaged or (approximately 10 seconds later). malfunction. • If the menu is currently displayed, press MENU To cancel the self-timer in the middle • When shooting in close-ups (Macro) mode, the first so that the menu disappears. focus depth becomes extremely shallow, and of the operation• You can also carry out this operation when the the entire subject may not be in focus. Press V ( ) on the control button again. mode switch is set to . • When shooting in close-ups (Macro) mode, the The indicator disappears from the LCD AF speed drops in order to focus accurately on screen. close subjects. • If you press the shutter button while standing in front of the camera, the focus and the exposure 28 may not be correctly set.,

Selecting a flash mode

(No flash): The flash does not strobe To prevent subjects’ eyes from 60min VGA 101 96 regardless of the surrounding brightness. appearing red Set [Red Eye Reduction] to [On] on the • If the menu is currently displayed, press MENU first so that the menu disappears. Setup screen (page 114). The indicator • When [ISO] is set to [Auto] in the menu, the appears on the LCD screen, and the flash S AF recommended shooting distance using the flash pre-strobes before shooting to reduce the is approx. 0.3 m to 1.5 m (11 7/8 inches to red-eye phenomenon. 59 1/8 inches) (W)/0.5 m to 1.5 m (19 3/4 inches to 59 1/8 inches) (T). • You can change the brightness of the flash with (Flash Level) in the menu (page 55). (You , Set the mode switch to , and cannot change the brightness of the flash while (Camera) is set to [Auto] in the menu.) press v ( ) on the control • When using the SL (Slow synchro) or (No button repeatedly to select a flash) mode, the shutter speed becomes slower m flash mode. in dark places. Be careful not to allow your hand to shake while holding the camera. Each time you press v ( ), the indicator • While charging the flash, the /CHG lamp changes as follows. flashes. After the charging is complete, the lamp goes out. No indicator (Auto): The flash • This setting is maintained even when the power automatically strobes when shooting is turned off. images in a dark place. The factory setting • Red-eye reduction may not produce the desired is Auto. effects depending on individual differences, the (Forced flash): The flash strobes distance to the subject, if the subject does not regardless of the surrounding brightness. see the pre-strobe, or other conditions. SL (Slow synchro): The flash strobes regardless of the surrounding brightness. The shutter speed is slow in a dark place, so you can clearly shoot the background that is out of flash light. Shooting still images,

Inserting the date and time

on a still image

Shooting images with the AF • The AF range finder frame does not appear.

illuminator The , or indicators flashes, and AF operates with priority on subjects located near The AF illuminator is fill light to focus the center. more easily on a subject in dark • The AF illuminator operates only when Program surroundings. The appears on the LCD (Camera) is set to [Auto], [Program], AutoON screen and the AF illuminator emits red (Magnifying glass mode), (Twilight Camera portrait mode), (Snow mode) or Mode light when the shutter button is pressed (Beach mode) in the menu. halfway until the focus is locked. • The AF illuminator emits very bright light.

MENU

Although there are no problems with safety, 60min VGA FINE 101 96 directly looking into the AF illuminator emitter 1 ON at close range is not recommended, as you may see residual spots for several minutes , Set the mode switch to , then afterwards, such as after looking into a press MENU. flashlight. S AF 30 F2.8 The menu appears. When this function is not needed, set [AF • When images are shot with the date and time Illuminator] to [Off] on the Setup screen superimposed, the date and time cannot be (page 114). removed later. • The date and time do not appear on the LCD screen during shooting, instead, the • If AF illuminator light does not reach the indicator appears on the LCD screen. The subject sufficiently or the subject has no actual date and time appear in red during contrast, focus will not be achieved. (A distance playback only. up to approximately 2.2 m (86 5/8 inches) is • The date and time is not inserted in Multi Burst recommended.) mode. • Focus is achieved as long as AF illuminator • You can also carry out this operation with the light reaches the subject, even if the light is mode switch set to or . slightly off the center of the subject. • When the focus preset distance is set (page 49), the AF illuminator does not function., Camera Camera AF Mode: Day&Time AF Mode: Single Digital Zoom: Date Digital Zoom: Smart Date/Time: Off Date/Time: Day&Time 1 Red Eye Reduction: 1 Red Eye Reduction: Off 2 AF Illuminator: 2 AF Illuminator: Auto Setup t Auto Review: Auto Review: On Mode PAGE SELECT234, Press B on the control button , Select (Camera) with v on , Select the date and time setting to advance to , then press B the control button, then press with v/V on the control button, again. B. then press z.

Select [Date/Time] with v/V,

The Setup screen appears. Day&Time: Superimposes the date, hour, then press B. and minute onto the image. Date: Superimposes the year, month and day onto the image. Off: Does not superimpose the date and time onto the image. After the setting has been completed, press MENU first so that the menu disappears, and shoot the image. • If you select [Date], the date is superimposed onto the image in the order selected in “Setting the date and time” (page 17). • This setting is maintained even when the power is turned off. Shooting still images,

Shooting according to scene conditions — Scene Selection

You can select from eight different shooting modes (magnifying glass, twilight, twilight portrait, landscape, snow, beach, high- speed shutter and fireworks) in accordance with the shooting conditions. The camera automatically makes the optimum settings to match the scene, making it easy to shoot high quality images even under difficult • • The close-ups (Macro) function does not work.conditions. The close-ups (Macro) function does not work. • • You cannot shoot in Exposure Bracket, Burst You cannot shoot in Exposure Bracket, Burst and Multi Burst mode. Magnifying glass mode and Multi Burst mode. • You cannot use the flash. The subject appears on the LCD screen • The flash is set to (Forced flash) or (No • Place the camera in a stable location and secure magnified by up to 3.3×. This lets you see flash). • it before shooting.The focal distance to a subject is approx. 1 cm details that would otherwise be difficult to to 20 cm (13/32 inch to 7 7/8 inches). confirm with the naked eye. • The optical zoom is locked to the W side and Twilight portrait mode Suitable for shooting portraits in dark Distance to the Magnification cannot be used. subject scale • When you press the zoom button, the image is places. Allows you to shoot sharp images of enlarged using the digital zoom. people in dark places without losing the 1 cm (13/32 inch) 3.3× dark atmosphere of the surroundings. The 2 cm (13/16 inch) 2.1× 1.1 shutter speed becomes slower, so be careful 5 cm (2 inches) 1.0× not to allow your hand to shake while 10 cm (4 inches) 0.5× Twilight mode holding the camera. 20 cm (7 7/8 inches) 0.3× Allows you to shoot night scenes at far distance without losing the dark atmosphere of the surroundings. The shutter speed becomes slower, so be careful not to allow your hand to shake while holding the camera. • You cannot shoot in Exposure Bracket, Burst and Multi Burst mode. 32 • The flash is set to SL (Slow Synchro)., Landscape mode Beach mode Fireworks mode Focuses only on a distant subject to shoot When shooting seaside or lakeside scenes, Fireworks are recorded in all their splendor landscapes, etc. the blue of the water is clearly recorded. by setting the focus distance to infinity. The shutter speed becomes slower, so be careful not to allow your hand to shake while holding the camera. • The close-ups (Macro) function does not work. • The flash is set to (Forced flash) or (No • The flash is set to (Forced flash) or (No flash). flash). High-speed shutter mode • The close-ups (Macro) function does not work. Snow mode Use this mode to shoot moving subjects • You cannot use the flash. When shooting snowy scenes or other outdoors or in other bright places. • You can change the shutter speed by setting an places where the whole screen appears EV adjustment value (page 50). white, use this mode to prevent sunken • You cannot set the white balance. colors and record clear and sharp images. • You cannot shoot in Exposure Bracket, Burst and Multi Burst mode. • Place the camera in a stable location and secure it before shooting. • The shutter speed becomes faster, so images shot in dark places become darker. • The flash is set to (Forced flash) or (No flash). • The flash is set to (Forced flash) or (No flash). Shooting still images,

NR slow shutter

The NR slow shutter mode removes noise from recorded images, providing clear Program Program images. When the shutter speed is 1/6 Auto Auto Camera second or slower in (Twilight mode), Camera WB ISO (Twilight portrait mode) and Mode (Fireworks mode), the camera automatically enters the NR slow shutter

MENU

2 function and “NR” is indicated next to the 1 shutter speed indicator. , Set the mode switch to , then , Select (Camera) with b on Press the shutter button press MENU. the control button, then select fully down. the desired mode with v/V. The menu appears. 2 F2.8 To return to normal mode r Select [Auto] or [Program] with v/V on the Then the screen turns control button. black. Capturing • The setting is maintained even when the power is turned off. r Finally, when “Processing” disappears, Processing the image has been recorded. • When the NR slow shutter function is activated, be careful not to allow your hand to shake while holding the camera.,

Viewing still images Viewing images on the LCD screen of your Viewing single images

camera Single (single-image) Index (nine-image) Index (sixteen-image) 60min VGA 101 8/9 screen screen screen 60min VGA 101 8/9 101-0008 20041110:30PM BACK/NEXT VOLUME 101-0008 20041110:30PM BACK/NEXT VOLUME • SINGLE DISPLAY • SINGLE DISPLAY 1 You can view images shot with your camera Index (nine-image/sixteen-image) , Set the mode switch to , and almost immediately on the LCD screen. screen turn on the power. You can select the following three methods Nine or sixteen images are displayed for viewing images. simultaneously in separate panels on the The last image in the selected recording LCD screen. folder (page 45) appears on the LCD Single (single-image) screen screen. You can view one image at a time, • For details on viewing movies, see page 78. displayed over the entire screen. • For a detailed description of the indicators, see • The image may appear rough right after page 124. playback starts due to the image processing. Viewing still images,

Viewing an index screen (nine-image or sixteen-image)

60min VGA 101 3/9 101-0003 20041110:30PM BACK/NEXT VOLUME • SINGLE DISPLAY • SINGLE DISPLAY , Select the desired still image , Press (Index) once. , Press (Index) once more. with b/B on the control button. The display switches to the index (nine- The display switches to the index b : To display the preceding image image) screen. (sixteen-image) screen. B : To display the next image To display the next (previous) index To display the next (previous) index screen screen Press v/V/b/B on the control button to Press v/V/b/B on the control button to move the yellow frame up/down/left/right. move the yellow frame up/down/left/right. To return to the single-image screen Press (Index) T side repeatedly, or press z on the control button.,

Viewing images on a TV screen

A/V connecting cable A/V OUT 1 (MONO) jack23TV/Video switch , Connect the A/V connecting , Connect the camera to the USB , Turn on the TV and set the TV/ cable (supplied) to the A/V OUT cradle. Video switch to “Video”. (MONO) jack of the USB cradle Connect the camera as illustrated. (supplied) and the audio/video • The name and location of this switch may differ depending on your TV. For details, see the input jacks of the TV. • Make sure the camera is securely connected to operating instructions supplied with the TV. the USB cradle. If your TV has stereo type input jacks, connect the audio plug (black) of the A/V connecting cable to the left audio input jack. • When the USB cable is connected to the USB cradle, remove the USB cable from the USB cradle. • Turn off both the camera and the TV before connecting the camera and the TV with the A/V connecting cable. Viewing still images, Viewing images on a TV screen PAL-M system POWER VGA If you want to view images on a TV screen, Brazil 101 2/9 you need a TV with a video input jack and the A/V connecting cable (supplied). PAL-N system The color system of the TV must match that Argentina, Paraguay, Uruguay 101-0002 20041110:30PM BACK/NEXT VOLUME of your digital still camera. Check the following lists: SECAM system Bulgaria, France, Guiana, Iran, Iraq, NTSC system Monaco, Russia, Ukraine, etc. 4 Bahama Islands, Bolivia, Canada, Central America, Chile, Colombia, Ecuador, , Set the mode switch to , and Jamaica, Japan, Korea, Mexico, Peru, turn on the camera. Surinam, Taiwan, the Philippines, the U.S.A., Venezuela, etc. Press b/B on the control button to select the desired image. PAL system Australia, Austria, Belgium, China, Czech • When using your camera abroad, it may be necessary to switch the video output signal to Republic, Denmark, Finland, Germany, match that of your TV system (page 115). Holland, Hong Kong, Hungary, Italy, Kuwait, Malaysia, New Zealand, Norway, Poland, Portugal, Singapore, Slovak Republic, Spain, Sweden, Switzerland, Thailand, United Kingdom, etc.,

Deleting still images Deleting images

60min VGA 60min VGA 60min VGA 101 2/9 101 2/9 101 2/9 Delete Delete 101-0002 20041110:30PM Exit Exit BACK/NEXT VOLUME BACK/NEXT BACK/NEXT123, Set the mode switch to , and , Press (Delete). , Select [Delete] with v on the turn on the camera. control button, then press z. The image has not yet been deleted at this

Press b/B on the control point. The message “Access” appears, and the

button to select the image you image has been deleted. want to delete. • You cannot delete the protected image (page 66). To continue and delete other images • Note that you cannot restore deleted images. Display the image to be deleted with b/B on the control button. Then, select [Delete] with v and press z. To cancel deleting Select [Exit] with V on the control button, then press z. Deleting still images,

Deleting images in index (nine-image or sixteen-image) mode

Delete Delete Exit Select All In This Folder Exit Select All In This Folder SELECT TO NEXT123, While an index (nine-image/ , Select [Select] with b/B on the , Select an image you want to sixteen-image) screen control button, then press z. delete with v/V/b/B on the (page 36) is displayed, press control button, then press z. (Delete). The (Delete) indicator appears on the selected image. At this point, the image has • Note that you cannot restore deleted images. not yet been deleted. Repeat this step for all of the images you want to delete. • To cancel a selection, select the image, then press z again so that the indicator disappears.,

Formatting a “Memory Stick Duo” MENU

Setup t Delete Exit OK Mode41Terminal side 2 , Press (Delete) and select , Insert the “Memory Stick Duo” , Turn on the camera, then press [OK] with B on the control you want to format into the MENU. button, then press z. camera. Press B on the control button to advance to , then press B The message “Access” appears, and the • The term “formatting” means preparing a images have been deleted. again.“Memory Stick Duo” to record images; this process is also called “initialization.” The The Setup screen appears. To cancel deleting “Memory Stick Duo” provided with this Select [Exit] with b on the control button, camera, and those available commercially, are • This operation is available no matter what then press . already formatted, and can be used z position the mode switch is in. immediately. To delete all the images in the • When you format a “Memory Stick Duo,” folder be aware that all data including protected images in the “Memory Stick Select [All In This Folder] with B on the Duo” will be permanently erased. control button in step 2, then press z. Select [OK], then press z. All of the unprotected images in the folder are deleted. To cancel deleting, select [Cancel], then press z. Deleting still images, Memory Stick Tool 60min Format: OK Format Create REC. folder: Cancel Change REC. folder: 1 All data will be erased 2 Ready?

OK

Cancel34, Select (Memory Stick Tool) , Select [OK] with v on the with v/V on the control button. control button, then press z.

Select [Format] with B, then

The message “Formatting” appears. When press B. this message disappears, the format is

Select [OK] with v, then press complete.

z. To cancel the formatting Select [Cancel] with V on the control button, then press z. • Using the AC Adaptor is recommended to prevent the power from turning off partway through formatting., Before advanced operations

Changing the menu settings To turn off the menu display How to setup and Press MENU again.

operate your camera a Press MENU. The menu appears. • You cannot select items displayed in gray. The usage of the menus and Setup screen • For a detailed description of the menu items, items that are most frequently used for see page 110. “Advanced operations” is described below. Program Auto Camera Control button WB ISO

MENU

b Press b/B on the control Mode switch button to select the item you want to set. Auto

ISO

WB ISO c Press v/V on the control button to select the desired setting. The selected setting is enlarged and the setting is entered.

Whenavor V mark is displayed

next to a setting item This means that there are also other setting items. To display these other items, scroll the screen with v/V. Before advanced operations,

Changing the items on the To cancel the Setup screen Setup screen Press MENU again. Deciding the still

image quality a Press MENU. To return to the menu from the The menu appears. Setup screen Mode switch: b Press B on the control button Press b on the control button to return to the You can select the still image quality from to advance to , then press B position enclosed by the frame in step 3, [Fine] or [Standard]. again. then press b again.

Before operation

The Setup screen appears. • For a detailed description of the Setup items, Set (Camera) in the menu to other than see page 114. [Auto] (pages 43 and 110). Control button Setup t MENU Mode switch c Press v/V/b/B on the control button to select the item you want to set. The frame of the selected item turns yellow. Setup 2 File Number: USB Connect: Video Out: OK Clock Set: Cancel d Press z on the control button to enter the setting., a Set the mode switch to . Creating a new folder

Creating or selecting

b Press MENU. a folder a Select (Memory Stick Tool) The menu appears. with v/V. c Select (P.Quality) with b/B, Mode switch: / / b Select [Create REC. Folder] then select the desired image Your camera can create multiple folders with B/v/V, and [OK] with B/v, quality with v/V. within a “Memory Stick Duo.” You can then press z. select the folder used to store images. The creating folder screen appears. When not creating a new folder, “101MSDCF” folder is selected as the 60min Fine FINE Create REC. Folderrecording folder. Standard P.Quality You can create folders up to “999MSDCF.” Creating REC. folder 102MSDCF Mode BRK M PFX Ready?

OK

Cancel

Before operation

Set the menu to the Setup screen (pages 44 and 114). c Select [OK] with v, then press z. Control button MENU A new folder is created with a number one higher than the largest number in Mode switch the “Memory Stick Duo”, and the folder becomes the recording folder.

To cancel folder creation

Select [Cancel] in step 2 or 3. • Once you create a new folder, you cannot delete the new folder with the camera. • Images are recorded in the newly created folder until a different folder is created or selected. • Up to 4000 images can be stored in one folder. When the folder capacity is exceeded, a new folder is automatically created. Before advanced operations,

Changing the recording

folder a Select (Memory Stick Tool) with v/V. b Select [Change REC. Folder] with B/V, and [OK] with B/v, then press z. The recording folder selection screen appears. Select REC. Folder 102 2/2 Folder Name:102MSDCF No. Of Files: 0 Created: 2004111:05:34AM

OK

Cancel BACK/NEXT c Select the desired folder with b/B, and [OK] with v, then press z.

To cancel changing the

recording folder Select [Cancel] in step 2 or 3. • You cannot select the “100MSDCF” folder as a recording folder. • The image is stored in the newly selected folder. You cannot move images to a different folder with this camera., Advanced still image shooting

Choosing a focus range a Set the mode switch to or Choosing an auto finder frame .

focus method — AF range finder b Press MENU. Mode switch: / The menu appears.Multipoint AF ( ) You can set the AF range finder frame and The camera calculates the distance in five c Select 9 (Focus) with b/B, the AF mode. places to the left, right, top, bottom and in then select the desired AF

AF range finder frame the center of the image, letting you shoot range with v/V.

using the auto focus function without The AF range finder frame selects the focus 60min VGAFINE 101 worrying about the image composition. 98 position according to the subject position This is useful when it is difficult to focus on and size. AF range the subject because it is not in the center of finder frame

AF Mode the frame. You can check the position

The AF mode sets the focus start/finish where the focus was adjusted using the S AF timing according to the AF response and the green frame. The focus is adjusted automatically. battery consumption. The Multipoint AF is the factory setting. When you press and hold the shutter button halfway down and the focus is

Before operation Center AF ( ) adjusted, the color of the AF range

When shooting still images, set This is useful for focusing on a subject near finder frame changes from white to (Camera) in the menu to other than [Auto] the center of the frame. Use together with green. or (Fireworks mode) (pages 43 and the AF lock function lets you shoot in the 110). • When you are shooting movies and you choose desired image composition. Multipoint AF, the distance to the center of the Control button screen is estimated as an average, so the AF MENU Spot AF ( ) works even with a certain amount of vibration. This is useful when focusing on an The AF range finder frame is . Center AF Mode switch and Spot AF automatically focus only on extremely small subject or a narrow area. selected frame, so these are convenient when Use together with the AF lock function lets you want to focus only on what you aim at. you shoot in the desired image composition. • When you use the digital zoom or AF Take care to hold the camera steady so that illuminator, priority AF movement is given to the subject does not deviate from the range subjects in or near the center of the frame. In finder frame. this case the , or indicator flashes and the AF range finder frame is not displayed. Advanced still image shooting,

Choosing a focus operation Continuous AF ( C AF) Before operation

— AF Mode The camera adjusts the focus before the Set the menu to the Setup screen (pages 44 shutter button is pressed and held halfway and 114).

Single AF ( S AF) down, and then continues to adjust the focus a Select (Camera) with v.

This mode is useful for shooting stationary even after AF lock is completed. This subjects. The focus is not adjusted before allows shooting of moving subjects with b Select [AF Mode] with B/v, the shutter button is pressed and held continued focus. and select the desired mode halfway down. When the shutter button is with B/v/V. pressed and held halfway down and AF lock • The focus is not adjusted after the lock is completed in the following cases, and the C AF Camera is complete, the focus is locked. indicator flashes. The camera operates in AF Mode: xSingleDigital Zoom: Monitor The factory setting is Single AF. Monitoring AF mode. Date/Time: Cont – When shooting in the dark place Red Eye Reduction:2 AF Illuminator:

Monitoring AF (M AF) – When shooting with a slow shutter speed Auto Review:

This shortens the time needed for focusing. • The AF range finder frame is set to Center AF. • Focus adjustment may not be able to keep up The camera automatically adjusts the focus when shooting fast moving subjects. When you select [Single] or [Monitor], before the shutter button is pressed and held • There is no lock sound when the focus is also select the AF range finder frame halfway down, letting you compose images adjusted. (page 47). with the focus already adjusted. When the • When recording with the self timer, the focus is shutter button is pressed and held halfway locked when you press the shutter button all the down and AF lock is complete, the focus is way down. • Battery consumption may be faster than in any locked. other AF mode. • Battery consumption may be faster than in Single AF mode., Shooting techniques • When you are using AF lock, you can Setting the distance When shooting with the subject at the edge of capture an image with the correct focus even the frame, or when using Center AF or Spot if the subject is at the edge of the frame. to the subject AF, the camera may focus on the center instead • You can carry out the AF lock adjustment of on the subject at the edge of the frame. In a process before you press the shutter button — Focus preset case like this, use AF lock to focus on the fully down. Mode switch: / subject, and then recompose the picture and shoot (except in Continuous AF mode). When shooting an image using a previously Compose the shot so that the subject is set distance to the subject, or when shooting centered in the AF range finder, and press the a subject through a net or through window shutter button halfway down. glass, it is difficult to get the proper focus in When the AE/AF lock indicator stops flashing auto focus mode. In these cases, use of the and remains on, return to the fully composed Focus preset is convenient. shot, and press the shutter button fully down. AE/AF lock indicator Before operation When shooting still images, set 60min VGA FINE 101 98 (Camera) in the menu to other than [Auto] AF range or (Magnifying glass mode) (pages 43 finder frame and 110). S AF F2.8 30 Control button m MENU 60min VGAFINE 101 97 Mode switch S AF Advanced still image shooting, a Set the mode switch to or a Set the mode switch to or . Adjusting the . exposure b Press MENU. b Press MENU. The menu appears. — EV adjustment The menu appears. c Select 9 (Focus) with b/B, Mode switch: / c Select (EV) with b/B. then select the distance to the You can manually change the exposure set The value of the exposure adjustment subject with v/V. by the camera. This function lets you obtain is displayed. You can select from the following the proper exposure when the contrast distance settings. (difference between bright and dark) 0.5m, 1.0m, 3.0m, 7.0m, (unlimited between the subject and the background is distance) extremely large. You can select values 0EV 0EV

EV

ranging from +2.0EV to –2.0EV in steps of WB ISO 1.0m 0.5m 0.5m 1/3EV. Spot AF Center AF d Select the desired exposure Multi AF Before operation value. Focus WB ISO When shooting still images, set Select the value with v/V. Adjust the (Camera) in the menu to other than [Auto] exposure value while checking the (pages 43 and 110). brightness of the background.

To return to auto focus mode

Select [Multi AF], [Center AF] or [Spot To reactivate auto exposure AF] in step 3. Control button Select [0EV] in step 4.

MENU

• Focal point information may not show the exact Mode switch • If a subject is being shot in extremely bright or distance. dark conditions, or the flash is used, the • When (Camera) in the menu is set to exposure adjustment may not be effective. (Landscape mode) or (Fireworks mode), the focus preset is restricted to (unlimited distance).,

Displaying a histogram • The histogram also appears when the

(Camera) in the menu is set to [Auto], but you Shooting techniques A histogram is a graph showing the cannot adjust the exposure. Normally, the camera automatically sets the brightness of an image. The horizontal axis • The histogram also appears when you press exposure. If the image is too dark or too shows the brightness, and the vertical axis while playing back a single image bright as shown below, we recommend that (page 35) or during Quick Review (page 24). you adjust the exposure value manually with shows the number of pixels. The graph • The histogram does not appear in the following viewing the histogram. When shooting a display indicates a dark image when cases: back-lit subject or a subject against a white skewed to the left side, and a bright image – During Quick Review of an image recorded (e.g. snowy) background, adjust the when skewed to the right side. The in Exposure Bracket mode exposure toward the + side. When shooting a histogram is useful to check the exposure – When using playback zoom black subject that fills the screen, adjust the during recording and playback when the – When viewing and shooting movies exposure toward the – side. • appears in the following cases: screen is difficult to see. – When recording in the digital zoom range – When the image size is [3:2] 80 5M FINE 101 4 – When rotating a still image – When viewing Multi Burst images • The histogram before recording represents the histogram of the image displayed on the LCD screen at that time. A difference occurs in the Brightness 0EV Underexposed t Adjust toward +histogram before and after you press the shutter Dark Bright button. When this happens, check the histogram while playing back a single-image or during Quick Review. a Set the mode switch to . In particular a large difference may appear in b Press to display the the following cases: – When the flash strobes histogram. – When [PFX] (P.Effect) is set to [Solarize] – When the shutter speed is slow or high Appropriate exposure c Press MENU. • The histogram may not appear for images The menu appears. recorded using other cameras. d Adjust the exposure based on the histogram. Overexposed t Adjust toward – Number of pixels Advanced still image shooting,

Selecting the Shooting three

metering mode images with the Spot Spot metering Mode switch: / Multi cross hair exposure shiftedMetering Mode WB ISO The camera measures the brightness to — Exposure Bracket determine the exposure. This function lets Mode switch: you select the following two metering Before operation modes to determine which portion of the When shooting still images, set The Exposure Bracket function records a subject to use for measuring the brightness. (Camera) in the menu to other than [Auto] series of three images with the exposure (pages 43 and 110). values automatically shifted. This lets you

Multi-pattern metering (no select the image with the appropriate Control button

indicator) exposure after recording when you are MENU unable to shoot good pictures depending on The image is divided into multiple regions Mode switch the brightness of the subject. and metering is performed for each region. The camera judges the subject position and background brightness, and determines a Before operation well-balanced exposure. Set (Camera) in the menu to other than The factory setting is multi-pattern [Auto], (Magnifying glass mode), metering. (Twilight mode), (Twilight portrait mode) or (Fireworks mode) (pages 43

Spot metering ( ) and 110).

Metering is performed for only a portion of a Set the mode switch to or Control button the subject. This lets you adjust the . MENU exposure to the subject even when the Mode switch subject is backlit or there is strong contrast b Press MENU. between the subject and the background. The menu appears. Position the spot metering cross hair on one point of the subject you want to shoot. c Select (Metering Mode) with To focus on the metering position, setting b/B, then select the desired 9 (Focus) to [Center AF] is recommended metering mode with v/V. (page 47)., a Set the mode switch to . • You cannot use the flash in this mode. 1st image (shifted in the • During shooting in this mode, the images are + direction) b Press MENU. not displayed on the LCD screen. Compose the The menu appears. image before pressing the shutter button. • The focus and white balance are adjusted for c Select [Mode] (REC Mode) with the first image, and these settings are also used / , then select [Exp Brktg] for the other images.b B • When the exposure is manually adjusted with v/V. (page 50), the exposure is shifted based on the adjusted brightness. d Select [BRK] (Bracket Step) • The recording interval is approximately with b/B, then select the 0.36 second. 2nd image (appropriate • If the subject is too bright or too dark, you may exposure for the camera) desired exposure adjustment be unable to shoot properly with the selected value with v/V. bracket adjustment value. ±1.0EV: Shifts the exposure value by plus or minus 1.0EV. ±0.7EV: Shifts the exposure value by plus or minus 0.7EV. ±0.3EV: Shifts the exposure value by plus or minus 0.3EV. 3rd image (shifted in the e Shoot the image. – direction)

To return to normal mode

Select [Normal] in step 3. Advanced still image shooting, (Incandescent) c Select [WB] (White Bal) with b/

Adjusting color tones • Places where the lighting conditions B, then select the desired

change quickly — White Balance setting with v/V.• Under bright lighting such as

Mode switch: / photography studios To reactivate auto adjustment

When the white balance is set to Auto, the WB (Flash) Select [Auto] in step 3. white balance is automatically set and the Adjusts the white balance only to the flash overall color balance is adjusted according conditions (It does not appear when the • Under fluorescent lights that flicker, the white to the shooting conditions. However, when mode switch is set to .) balance adjustment function may not work you shoot under fixed conditions or special correctly even though you select . • When the flash strobes, the manual setting is lighting conditions, you can manually Before operation canceled, and the image is recorded in [Auto] adjust the white balance. When shooting still images, set mode (except in WB mode). (Camera) in the menu to other than [Auto] • The available White Balance settings are Auto (no indicator) limited as follows according to the (pages 43 and 110). Adjusts the white balance automatically. (Camera) setting in the menu: The factory setting is [Auto]. – (Twilight Portrait mode): [Auto] or WB Control button (Flash) only – (Fireworks mode): (Daylight) only (Daylight) MENU Shooting outdoors, shooting night scenes, Mode switch neon signs, fireworks or sunrise, or Shooting techniques shooting just before and after sundown The subject coloring is affected by the lighting conditions. For example, the entire (Cloudy) image appears blue under sunlight in the Shooting under a cloudy sky summer, and white items gain a reddish tint under incandescent light bulbs, etc. The human eye can resolve these problems, but (Fluorescent) digital still cameras cannot recognize the Shooting under fluorescent lighting correct colors without adjustments. a Set the mode switch to or Normally, the camera makes these adjustments automatically, but if recorded . image colors appear unnatural, we recommend that you adjust the white b Press MENU. balance. The menu appears., a Set the mode switch to .

Adjusting the flash Shooting images

level b Press MENU. continuously The menu appears. — Flash Level c Select (Flash Level) with b/ — Burst Mode switch: B, then select the desired Mode switch: You can adjust the amount of flash light. setting with v/V. This mode is used for continuous shooting. High: Makes the flash level higher Each time you press and hold the shutter

Before operation than normal. button in this mode, the camera records

Normal: Normal setting. Set (Camera) in the menu to other than maximum four images in succession.Low: Makes the flash level lower than [Auto], (Twilight mode) or normal. (Fireworks mode) (pages 43 and 110). Speed priority burst ( S ) • You may not be able to shoot with the set flash The images are shot with a short interval level depending on the shooting conditions. (approx. 0.33 second). During shooting in Control button this mode, the images are not displayed on MENU the LCD screen. Compose the image before pressing the shutter button. Mode switch

Framing priority burst ( F )

Shooting is performed while displaying the images on the LCD screen. The shooting interval (approx. 0.36 second) becomes longer than speed priority burst. • When a “Memory Stick Duo” becomes full, shooting stops even if you continue to hold down the shutter button. Advanced still image shooting,

Before operation d Shoot the image.

Set (Camera) in the menu to other than You can also shoot only two or three Shooting in Multi (Magnifying glass mode), images by releasing the shutter button Burst mode (Twilight mode), (Twilight portrait partway. mode) or (Fireworks mode) (pages 43 When the message “Recording” — Multi Burst and 110). disappears, you can shoot the next image. Mode switch: Control button This mode records 16 frames in succession MENU To return to normal mode each time you press the shutter button. This Select [Normal] in step 3. is convenient for checking your form in Mode switch sports, for example. • You cannot use the flash in this mode. • When recording with the self timer, a series of Before operation four images are recorded each time you press Set (Camera) in the menu to other than the shutter button. (Magnifying glass mode), (Twilight mode), (Twilight portrait mode) or (Fireworks mode) (pages 43 and 110). a Set the mode switch to . Control button b Press MENU. MENU The menu appears. Mode switch c Select [Mode] (REC Mode) with b/B, then select from [Speed Burst] or [Framing Burst] with v/V. a Set the mode switch to . b Press MENU. The menu appears., c Select [Mode] (REC Mode) with d Shoot the image. b/B, then select [Multi Burst] Shooting still images When the message “Recording” with v/V. for e-mail disappears, you can shoot the next image. d Select M (Interval) with b/B, — E-Mail then select the desired frame Mode switch: To return to normal mode interval with v/V. Select [Normal] in step 3. In E-mail mode, a small-size image You can choose the frame interval (320×240) that is suitable for e-mail from [1/7.5], [1/15] or [1/30]. • For instructions on how to attach images to an transmission is also recorded at the same e-mail message, consult the User’s Manual for time as recording a normal still image. (See your e-mail software. page 20 for the normal still image sizes.) • For the number of images you can record in 1/7.5 E-mail mode, see page 108. 1/15 1/30 Control button1/30 Interval MENU Mode BRK M PFX Mode switch e Shoot the image. A continuous burst of 16 frames are recorded within a single still image (image size 1M). • You cannot use the following functions in Multi Burst mode: – Smart zoom – Flash a Set the mode switch to . – Inserting the date and time • When (Camera) in the menu is set to b Press MENU. [Auto], the frame interval is fixed to [1/30]. • See page 64 to play back Multi Burst images The menu appears. using this camera. • For the number of images that can be recorded c Select [Mode] (REC Mode) with in Multi Burst mode, see page 108. b/B, then select [E-Mail] with v/V. Advanced still image shooting, d Shoot the image.

Shooting still images If you press and release the Adding special effects

with audio files shutter button, sound is recorded for five seconds. — Picture Effect — Voice If you hold down the shutter Mode switch: / button, sound is recorded until you Mode switch: release the shutter button for up to You can digitally process images to obtain In Voice mode, an audio track is also 40 seconds. special effects. recorded at the same time as recording a Solarize normal still image. To return to normal mode The light contrast is Select [Normal] in step 3. clearer and the picture looks like an Control button illustration. MENU • To view images recorded in Voice mode, carry Microphone out the same procedure described in “Viewing movies on the LCD screen” (page 78). Mode switch • Do not touch the microphone during shooting images in this mode. Sepia • For the number of images you can record in The picture is sepia- Voice mode, see page 108. toned like an old photograph. a Set the mode switch to . Neg.Art The color and b Press MENU. brightness of the The menu appears. picture are reversed as in a negative. c Select [Mode] (REC Mode) with b/B, then select [Voice] with v.,

Before operation

When shooting still images, set (Camera) in the menu to other than [Auto] (pages 43 and 110). Control button

MENU

Mode switch a Set the mode switch to or . b Press MENU. The menu appears. c Select [PFX] (P.Effect) with b/ B, then select the desired mode with v/V. d Shoot the image.

To cancel Picture Effects

Select [Off] in step 3. Advanced still image shooting,

Advanced still image viewing

d Select the desired folder with Single screen

Selecting the folder b/B.

60min and playing back VGA 101 9/9 Select Folder images 102 2/2Folder Name:102MSDCF No. Of Files: 9 Created: — Folder 2004111:05:34AM

OK

101-0009 20041110:30PM

Mode switch: Cancel BACK/NEXT VOLUMEBACK/NEXT

Select the folder that images you want to Index (nine-image) screen playback are stored. e Select [OK] with v, then press z. Control button

MENU To cancel the selection

Mode switch Select [Cancel] in step 5. SINGLE DISPLAY

When multiple folders are

Index (sixteen-image) screen created in the “Memory Stick

Duo”

When the first or last image in the folder is displayed, the following indicators appear on the LCD screen. a Set the mode switch to . : Moves to the previous folder. : Moves to the next folder. • SINGLE DISPLAY b Press MENU. : Moves to both the previous and next The menu appears. folders. • When no images are stored in the folder, “No file in this folder” appears. c Select (Folder) with b, then • You can play back images from a last-shot one press z. without selecting the folder.,

Enlarging an image e Adjust the image size with Enlarging a portion of — Playback zoom / (playback zoom).

a still image a Set the mode switch to .

Mode switch: b Display the image to be x5.0

You can enlarge a part of an image up to enlarged with b/B. five times the original size. You can also record the magnified image as a new file. c Press (playback zoom) to zoom in on the image. Control button d Select the desired portion of MENU the image with v/V/b/B. / To cancel playback zoom Mode switch Press v Press z. • You cannot use playback zoom for movies and Multi Burst images. Press Press • If you press (playback zoom) while a non- b B enlarged image is displayed, the LCD screen switches to the index screen (page 36). • You can enlarge the images displayed with the Quick Review function (page 24) by performing steps 3 to 5. Press V v: To view more of the top of the image V: To view more of the bottom of the image b: To view more of the left side of the image B: To view more of the right side of the image Advanced still image viewing,

Recording an enlarged a Set the mode switch to .

image — Trimming Playing back successive images b Press MENU. a Press MENU after playback The menu appears. zoom. — Slide Show c Select (Slide) with b/B, then The menu appears. Mode switch: press z. b Select [Trimming] with B, then You can play back recorded images in Set the following items with v/V/b/B. press z. order. This function is useful for checking Interval your images or for presentations, etc. c Select the image size with / , 3 sec/5 sec/10 sec/30 sec/1 minv V then press z. Control button Image The image is recorded, and the image MENU Folder: Plays back all images in the on the LCD screen returns to the selected folder.Mode switch normal size after recording. All: Plays back all images stored in the “Memory Stick Duo.” • The trimmed image is recorded as the newest Repeat file in the selected recording folder, and the original image is retained. On: Plays back images in a • The quality of trimmed images may deteriorate. continuous loop. • You cannot trim to an image size of 3:2. Off: After all the images have been • You cannot trim images displayed with Quick played back, the slide show Review. ends. d Select [Start] with V/B, then press z. The slide show begins.,

To cancel the slide show setting

Select [Cancel] in step 3. Rotating still images Control buttonMENU

To stop slide show playback — Rotate Mode switch

Press z, select [Exit] with B, then press z Mode switch: again. You can rotate an image recorded in portrait orientation and display it in landscape

To skip to the next/previous orientation.

image during the slide show Press B (next) or b (previous). • The interval setting time is approximate, and a Set the mode switch to , and may vary according to the playback image size. display the image to rotate. b Press MENU. The menu appears. c Select (Rotate) with b/B, then press z. d Select with v, then rotate the image with b/B. e Select [OK] with v/V, then press z. Advanced still image viewing,

To cancel rotation Playing back continuously

Select [Cancel] in step 4 or 5, then press Playing back images shot in Multi Burst a Set the mode switch to .z. mode b Select the Multi Burst image • You cannot rotate protected images, movies and with b/B. Multi Burst images. • You may not be able to rotate images shot with Mode switch: The selected Multi Burst image is other cameras. You can play back Multi Burst images played back continuously. • When viewing images on a computer, the continuously or play them back frame by 60min M image rotation information may not be frame. This function is used for checking 101 14/14 reflected depending on the application the image. software. Control button MENU 101-0014 20041110:30PMPAUSE BACK/NEXT VOLUME Mode switch

To pause playback

Press z. To resume playback, press z again. The playback starts from the frame displayed on the LCD screen. • When Multi Burst images are played back on a computer or on a camera without the Multi Burst function, the 16 frames you shot will be displayed at the same time as part of one image. • You cannot cut the Multi Burst image.,

Playing back frame by frame To return to the normal playback

Press z in step 4. The playback starts a Set the mode switch to . from the frame displayed on the LCD b Select the Multi Burst image screen. with b/B. To delete shot images The selected Multi Burst image is When using this mode, you cannot delete played back continuously. only certain frames. When you delete c Press z when the desired images, all 16 of the frames are deleted at frame is displayed. the same time. “Step” appears. 1 Display the desired Multi Burst image to delete. 60min M 101 14/14 Step 2 Press (Delete). 3/16 3 Select [Delete], then press z. All of the frames are deleted. 101-0014 20041110:30PM PLAY FRAME BACK/NEXT VOLUME d Advance the frame with b/B. B: A next frame is displayed. When you keep and press B, the frame advances. b: A previous frame is displayed. When you keep and press b, the frame advances in the reverse direction. Advanced still image viewing, Still image editing

In single-image mode In index (nine-image/ Protecting images

Set the mode switch to . sixteen-image) modea — Protect Display the image you want to a Set the mode switch to , b Mode switch: protect with / . then press (Index) tobBdisplay the index (nine-image) This function protects images against c Press MENU. accidental erasure. screen. The menu appears. Press (Index) twice to display a Control button MENU d Select (Protect) with b/B, sixteen-image index screen. then press z. b Press MENU. Mode switch The displayed image is protected. The The menu appears. - (protect) indicator appears on the image. c Select (Protect) with b/B, 60min then press z.VGA 101 2/9 d Select [Select] with b/B, then press z. Protect Exit BACK/NEXT e Select the image you want to protect with v/V/b/B, then • Note that when you format a “Memory Stick e To continue and protect other Duo,” even protected images are deleted and press z.images, select the desired cannot be restored. The green - indicator appears on the image with b/B, then press z. selected image.

To cancel the protection

Press z again in step 4 or 5. The - indicator disappears. SELECT MENU TO NEXT f Repeat step 5 to protect other images., g Press MENU. a Set the mode switch to .

Changing image size

h Select [OK] with B, then press b Display the image you want to z. — Resize resize with b/B. The - indicator turns white. The Mode switch: c Press MENU. selected images are protected. You can change the image size of a The menu appears.

To exit the Protect function recorded image, and save it as a new file. d Select (Resize) with b/B,

You can resize to the following sizes: Select [Cancel] in step 4 or select [Exit] in 5M, 3M, 1M, VGA then press z. step 8, then press z. The original image is retained even after e Select the desired size with v/ resizing.

To cancel individual protection V, then press z.

Select the image to be unprotected with Control button The resized image is recorded in the v/V/b/B, then press z in step 5. The - MENU recording folder as the newest file. indicator turns gray. Repeat this operation Mode switch for all images that are to be unprotected. To cancel resizing Press MENU, select [OK], and then press Select [Cancel] in step 5. z. • You cannot change the size of movies or Multi

To protect all images in the Burst images.

• When you change from a small size to a large folder size, the image quality deteriorates. Select [All In This Folder] in step 4, and • You cannot resize to an image size of 3:2. press z. Select [On], then press z. • When you resize a 3:2 image, the upper and lower black portions will be displayed on the image.

To cancel all protection of all

images in the folder Select [All In This Folder] in step 4, and press z. Select [Off], then press z. Still image editing, • You cannot mark movies. In single-image mode

Choosing images to • In E-mail mode, a print (DPOF) mark is

print marked on the normal size image that is a Set the mode switch to .recorded at the same time. • When you mark images shot in Multi Burst b Display the image you want to — Print (DPOF) mark mode, all the images are printed on one image mark with b/B. Mode switch: divided into 16 frames.• You cannot set the number of prints. c Press MENU. You can mark still images shot with your The menu appears. camera that you want to have printed. This function is convenient when you have d Select (DPOF) with b/B, images printed at a shop or using a printer then press z. that conforms with the DPOF (Digital Print The mark is marked on the Order Format) standard or a PictBridge displayed image. compliant printer. 60min VGA 101 2/9 Control button

MENU DPOF

Exit Mode switch BACK/NEXT e To continue and mark other images, display the desired image with b/B, then press z.

To unmark the mark

Press z again in step 4 or 5. The mark disappears.,

In index (nine-image/ f Repeat step 5 to mark other

sixteen-image) mode images. a Set the mode switch to , g Press MENU. then press (Index) to h Select [OK] with B, then press display the index (nine-image) z. screen. Press (Index) twice to display a The mark turns white. The sixteen-image index screen. mark setting is completed. b Press MENU.

To unmark marks

The menu appears. Select the images to be unmarked with v/ c Select (DPOF) with B, then V/b/B in step 5, then press z. press z. d Select [Select] with b/B, then To unmark all the marks in press the folderz. Select [All In This Folder] in step 4, then • When marking marks, you cannot select [All In This Folder]. press z. Select [Off], then press z. e Select the image you want to mark with v/V/b/B, then press To exit the mark function Select [Cancel] in step 4, or select [Exit] z. in step 8. The green mark appears on the selected image. SELECT MENU TO NEXT Still image editing,

Still image printing (PictBridge printer) Preparing the camera Connecting the camera to Connecting to a PictBridge printer Set the USB mode on the camera to connect

the printer the camera with a printer. Connect the camera to the USB cradle.

Mode switch: / / Then, connect the (USB) jack on the Before operation USB cradle and the USB jack on the printer

You can easily print images shot with your Set the menu to the Setup screen (page 44). with the USB cable (supplied). Turn on the camera without using a computer by using a camera and the printer. PictBridge compliant printer. Control button The camera turns to playback mode When the USB connection is set on the MENU regardless of the mode switch position and Setup screen, you can connect the camera mounted in the USB cradle directly to a Mode switch an image in the selected playback folder appears on the LCD screen. printer using the USB cable. Using a PictBridge compliant printer easily prints the index print*. After the connection is made, the * An index print function may not be provided indicator appears on depending on a printer. a Select (Setup 2) with V, the LCD screen. • Using the AC Adaptor is recommended to then select [USB Connect] 5M 101 2/9 prevent the power from turning off partway with B/v/V. through printing. b Select [PictBridge] with B/v, then press z. 101-0002 20041110:30AM BACK/NEXT VOLUME Setup 2 File Number: Printer USB Connect: PictBridge Video Out: PNTTSPC 1 Clock Set: Normal The USB mode is set.,

When [USB Connect] is not set In single-image mode

to [PictBridge] on the Setup Printing images screen a Display the image you want to Even if you turn on the camera, you cannot Mode switch: / / print with b/B. use the PictBridge function. You can select the image and print it. Set up b Press MENU. Disconnect the USB cable from the USB the camera following the procedure on page The menu appears. cradle and set [USB Connect] to 70, and connect the printer. [PictBridge]. c Select (Print) with b/B, then Control button press z. MENU d Select [This image] with v/V, then press z. Mode switch The print setting screen appears. 5M 101 2/9 Print Index Off Date Off Quantity 1 Exit OK • Items that the printer does not support are • You cannot print movies. not displayed. • When you print an E-mail image, only the JPEG image that was recorded at the same time e Select [Quantity] with v/V, is printed. select the number of sheets • When an error notification is received from the with b/B. connected printer, the indicator flashes for approximately 5 seconds. Check the connected You can select the number up to 20. printer. Still image printing (PictBridge printer), f Select [OK] with V/B, then To insert the date and time on In index (nine-image/ press z. images sixteen-image) mode The image is printed. Select [Date] in step 5, then select the date Do not disconnect the USB cable format with b/B. You can select from a Press (Index) to display the while the (USB cable [Day&Time] or [Date]. When you chose index (nine-image) screen. disconnected prohibited) indicator [Date], the date will be inserted in the order Press (Index) twice to display a appears on the LCD screen. set in “Setting the date and time” (page 17). sixteen-image index screen. This function may not be provided 5M b Press MENU. 101 2/9 depending on a printer. The menu appears. Printing 2/3 c Select (Print) with B, then Exit press z. d Select [Select] with b/B, then press z.

To cancel printing

Select [Cancel] in step 4 or select [Exit] in e Select the image you want to step 6. print with v/V/b/B, then press z.

To print other images The mark appears on the selected

Select the image after step 6, then select image. [Print] with v.

To print all the images with the

print (DPOF) mark Select [DPOF image] in step 4. All the SELECT MENU TO NEXT images with the mark are printed by the specified number regardless of the f Repeat step 5 to print other displayed image. images., g Press MENU. To cancel printing The print setting screen appears. Select [Cancel] in step 4 or select [Exit] in Printing index-images step 9. Mode switch: / / Print To print all the images with the You can print some images side-by-side. Index Off Date Off print (DPOF) mark We refer to this function as an index print*. Quantity 1 Select [DPOF image] in step You can also arrange the specified quantity Exit OK 4. All the images with the mark are printed by the of the same image side-by-side and print • Items that the printer does not support are specified number regardless of the them as an index image (see “In single- not displayed. displayed image. image mode”), or arrange a set of different images side-by-side as an index image and h Select [Quantity] with v/V, print the specified number of sets (see “In select the number of sheets To print all the images in the index mode”). with b/B. folder Set up the camera following the procedure You can select the number up to 20. Select [All In This Folder] in step 4, then on page 70, and connect the printer. The specified quantity of all the press z. * An index print function may not be provided selected images are printed. depending on a printer.

To insert the date and time on

i Select [OK] with V/B, then images press . Control buttonz Select [Date] in step 8, then select the date MENU The images are printed. format with b/B. You can select from Do not disconnect the USB cable [Day&Time] or [Date]. When you chose while the indicator appears on [Date], the date will be inserted in the order the LCD screen. set in “Setting the date and time” (page 17). This function may not be provided depending on a printer. Printing 2/3 Exit Still image printing (PictBridge printer), • You cannot print movies. In single-image mode g Select [OK] with V/B, then • When you print an E-mail image, only the press z. JPEG image that was recorded at the same time a Display the image you want to is printed. print with The image is printed.b/B. • When an error notification is received from the Do not disconnect the USB cable connected printer, the indicator flashes for b Press MENU. while the (USB cable approximately 5 seconds. Check the connected disconnected prohibited) indicator printer. The menu appears. appears on the LCD screen. c Select (Print) with b/B, then press z. d Select [This image] with v/V, Printing Index1/1 then press z. Exit The print setting screen appears. 5M 101 2/9 To cancel printing Print Index Off Select [Cancel] in step 4 or select [Exit] in Date Off step 7. Quantity 1 Exit OK

To print other images

• Items that the printer does not support are Select the image after step 7. Select not displayed. [Print] with v, then repeat from step 4. e Select [Index] with v, then select [On] with b/B. To print all the images with the print (DPOF) mark f Select [Quantity] with v/V, Select [DPOF image] in step 4. All the select the number of sheets images with the mark are printed by the laid side-by-side with b/B. specified number regardless of the You can select the number up to 20. displayed image. You can arrange the specified quantity of an image side-by-side.,

To insert the date and time on In index (nine-image/ i Select [Quantity] with v/V,

images sixteen-image) mode select the number of sets you Select [Date] in step 6, then select the date want to print with b/B. format with / . You can select from a Press (Index) to display thebB[Day&Time] or [Date]. When you chose index (nine-image) screen. You can select the number up to 20. [Date], the date will be inserted in the order Press (Index) twice to displayajSelect [OK] with V/B, then set in “Setting the date and time” (page 17). sixteen-image index screen. press z. This function may not be provided b Press MENU. The image is printed. depending on a printer. Do not disconnect the USB cable The menu appears. while the indicator appears on • The designated number of images may not all c Select (Print) with B, then the LCD screen. fit onto a single sheet depending on the quantity of images. press z. d Select [Select] with b/B, then Printing Index press z. 1/1 e Select the desired image with Exit v/V/b/B, then press z. The mark appears on the selected To cancel printing image. Select [Cancel] in step 4 or select [Exit] in step 0.

To print all the images with the

print (DPOF) mark •SELECT MENU TO NEXT Select [DPOF image] in step 4. All the images with the mark are printed by the f Repeat step 5 to print other specified number regardless of the images. displayed image. g Press MENU. h Select [Index] with v, then select [On] with b/B. Still image printing (PictBridge printer),

To print all the images in the

folder Select [All In This Folder] in step 4, then press z.

To insert the date and time on

images Select [Date] in step 9, then select the date format with b/B. You can select from [Day&Time] or [Date]. When you chose [Date], the date will be inserted in the order set in “Setting the date and time” (page 17). This function may not be provided depending on a printer.,

Enjoying movies

c Select the desired size with v/ Shooting close-ups (Macro)

Shooting movies V. Set the mode switch to and follow the

procedure on page 27.

Mode switch: You can choose from [640(Fine)],

[640(Standard)] and [160]. You can shoot movies with sound using • [640(Fine)] can be recorded only on Using the self-timer your camera. “Memory Stick PRO Duo.” Set the mode switch to and follow the d Press the shutter button fully procedure on page 28. down. Control button • Do not touch the microphone during shooting Microphone “REC” appears on the LCD screen and movies. Shutter button the camera starts recording the image • You cannot use the following functions during and sound. shooting movies: Mode switch 60min STD640101 – Changing the zoom scale REC 00:00:02(00:10:48) – Flash – Inserting the date and time • When you set the image size to [640(Fine)] while connecting the A/V connecting cable to A/V OUT (MONO) jack, the subject does not appear on the LCD screen. The LCD screen Recording stops when the “Memory turns blue. Stick Duo” is full. • For the recording time in each movie mode, see page 109. e Press the shutter button fully down again to stop recording. a Set the mode switch to . b Press (Image Size). Indicators during shooting The Image Size setup appears. The screen indicators are not recorded. Each time you press , the status of the LCD screen changes as follows: Indicators off t LCD backlight off t Indicators on. A histogram is not displayed. For a detailed description of the indicators, see page 123. Enjoying movies, a Set the mode switch to . To advance or rewind the movie

Viewing movies on Press b/B during playback.

the LCD screen b Select the desired movie with To return to the normal playback, press z. b/B.

Mode switch: Movies with the image size Indicators during viewing

[640(Fine)] or [640(Standard)] are You can view movies on the LCD screen moviesdisplayed on the full screen. with sound from the speaker. Each time you press , the status of the 60min STD640101 10/10 screen changes as follows: Indicators off Control button 00:00:00 t LCD backlight off t Indicators on. Speaker A histogram is not displayed. For a detailed description of the indicators, Mode switch 101_0010 20041110:30PM PLAY BACK/NEXT VOLUME see page 125. Movies with the image size [160] are displayed a size smaller. • The procedure for viewing movies on a TV is the same as that for viewing still images c Press z. (page 37). The movie and sound are played back. • The movies recorded using earlier Sony models During playback, (Playback) may be also displayed a size smaller.B appears on the LCD screen. 60min STD640101 10/10 00:00:03 101_0010 20041110:30 Playback barPM STOP REV/CUE VOLUME

To stop playback

Press z again.

To adjust the volume

Press v/V to adjust the volume.,

In single-image mode In index (nine-image/ Deleting movies

Set the mode switch to . sixteen-image) modea Mode switch: Display the movie you want to a Set the mode switch to , b You can delete unwanted movies. delete with b/B. then press (Index) to display an index (nine-image) Control button c Press (Delete). screen. The movie has not yet been deleted at Press (Index) twice to display a this point. Mode switch sixteen-image index screen. d Select [Delete] with v, then b Press (Delete). press z. The movie has not yet been deleted at The message “Access” appears, and this point. the movie has been deleted. c Select [Select] with b/B, then e To continue and delete other press z. movies, display the movie you want to delete with b/B, and d Select the movie you want to repeat step . delete with v/V/b/B, then 4 • You cannot delete protected movies. press z. • Note that you cannot restore deleted movies.

To cancel deletion The green (Delete) indicator

Select [Exit] in step 4 or 5. appears on the selected movie. SELECT TO NEXT The movie has not yet been deleted at this point. e Repeat step 4 to delete other movies. Enjoying movies, f Press (Delete). Cutting a movie numbered

Editing movies 101_0002

g Select [OK] with B, then press 101_0001 101_0003 z. Mode switch: The message “Access” appears, and You can cut movies, or delete unnecessary123the movies have been deleted. portions of movies. This is the recommended mode to use when the 101_0002

To cancel deletion “Memory Stick Duo” capacity is 1. Cutting scene A.

Select [Exit] in step 3 or 7. insufficient, or when you attach movies to1A2B3your e-mail messages.

To delete all images in the folder

Divide point 101_0002 Select [All In This Folder] in step 3, then The file numbers assigned when 2. Cutting scene B. press z. Select [OK] with B, then press z. movies are cut 101_0004 To cancel deletion, select [Cancel] with b, The cut movies are assigned new numbers then press z. and recorded as the newest files in the13A2Bselected recording folder. The original movie is deleted, and that number is 101_0005 Divide skipped. point 3. Deleting scenes A and B if they are Control button unnecessary. MENU 101_0004 101_0007 Mode switch13A2B101_0006 Delete Delete 4. Only the desired scenes remain. 132101_0006,

Cutting movies g Select [OK] with v, then press Deleting unnecessary

z.

Set the mode switch to . portions of moviesa

The movie is cut.

Select the movie you want to a Cut an unnecessary portion of b

cut with b/B. To cancel cutting a movie (page 81). Select [Exit] in step 5 or 7. The movie b Display the portion of the c Press MENU. appears on the LCD screen again. movie you want to delete. The menu appears. d Select (Divide) with B, then • You cannot cut the following images. c Press (Delete). – Still images press z. Next, select [OK] with The movie has not yet been deleted at – Movie files not long enough to cut this point. v, then press z. – Protected movie files The playback of the movie starts. • You cannot restore files once you cut them. d Select [Delete] with v, then • The original movie is deleted when you cut it. press z. e Decide on a cutting point. • The cut movies are recorded as the newest files in the selected recording folder. The movie currently displayed on the Press z at the desired cutting point. LCD screen is deleted. 60min STD640101 10/10 Divide 00:00:02 • Note that you cannot restore deleted portions of Dividing Point movies. O K Cancel Exit When you want to adjust the cutting point, use [c/C] (frame forward/ rewind) and adjust the cutting point using b/B. If you want to change the cutting point, select [Cancel]. The playback of the movie starts again. f When you have decided on a cutting point, select [OK] with v/V, and press z. Enjoying movies,

Enjoying images on your computer

• Operations are not guaranteed when using a Contents of the CD-ROM

Copying images to USB hub.

your computer • Operations are not guaranteed for all the x USB Driverrecommended computer environments This driver is needed in order to connect the — For Windows users mentioned above. camera to a computer. • When using Windows XP, you need not install

Recommended computer USB mode the USB driver.

environment There are two modes for connecting toaxImage Transfer computer, [Normal] and [PTP]* modes. OS: Microsoft Windows 98, Windows This application is used to easily transfer The factory setting is the [Normal] mode. 98SE, Windows 2000 Professional, images from the camera to a computer. This section describes the [Normal] mode Windows Millennium Edition, Windows as an example. x ImageMixer XP Home Edition or Windows XP This application is used to display and edit Professional * Compatible only with Windows XP. When The above OS must be installed at the connected to a computer, only the data in the images that are stored in a computer. folder selected by the camera is copied to the factory. Operation is not assured in an computer. To select a folder, perform the • The required operations may differ depending environment upgraded to the operating procedure on page 60. on your OS. systems described above or in a multi-boot • Close down all applications running on environment. Communication with your the computer before installing the USB CPU: MMX Pentium 200 MHz or faster driver and application.computer • When using Windows XP or Windows 2000, USB connector: Provided as standard When your computer resumes from the log on as Administrators. Display: 800 × 600 dots or more suspend or sleep mode, communication • The display settings should be 800 × 600 dots High Color (16-bit color, 65,000 colors) or between your camera and your computer or more and High Color (16-bit color, 65,000 more colors) or more. When set to less than 800 × may not recover at the same time. 600 dots or 256 colors or less, the model • This camera conforms to USB 2.0. selection screen does not appear. • Use with a USB 2.0 (High-Speed USB) When a USB connector is not compatible computer environment allows high- provided on your computer speed data transfer. When neither a USB connector nor a • If you connect two or more USB equipment to “Memory Stick” slot is provided, you can a single computer at the same time, some equipment, including your camera, may not copy images using an additional device. See operate depending on the type of USB the Sony Website for details. equipment. http://www.sony.net/,

Installing the USB driver c Click [USB Driver] on the e Click [Yes, I want to restart my

installing menu screen. computer now], then click When using Windows XP, you need not install the USB driver. [Finish]. Once the USB driver is installed, you need not install the USB driver again. a Start up your computer, and insert the CD-ROM (supplied) into the CD-ROM drive. Do not connect your camera to your computer at this time. The “InstallShield Wizard” screen appears. Your computer restarts. Then, you can The model selection screen appears. If establish USB connection. d Click [Next]. When the it does not appear, double-click (My Computer) t (ImageMixer) “Information” screen appears, in that order. click [Next]. b Click [Cyber-shot] on the model selection screen. The installing menu screen appears. The USB driver installation starts. When the installation is completed, the screen informs you of completion. Enjoying images on your computer,

Installing “Image Transfer” c Click [Next]. When “Licence e Select the folder to be

Agreement” screen appears, installed, then click [Next]. You can use the “Image Transfer” software to copy images to your computer click [Yes]. Select the program folder, then automatically when you connect the camera click [Next]. to your computer with the supplied USB cable. a Click [Cyber-shot] on the model selection screen. Read the agreement carefully. If you The installing menu screen appears. accept the terms of the agreement, f Confirm if the checkbox is proceed with the installation. The b Click [Image Transfer] on the “Information” screen appears. checked on the “Image installing menu screen. Transfer Settings” screen, d Click [Next]. Select the desired language, then click [Next]. then click [OK]. When the installation is completed, the screen informs you of completion. The “Welcome to the InstallShield Wizard for Image Transfer” screen appears. 84 • This section describes the English screen., g Click [Finish]. Installing “ImageMixer” • When you use Windows 2000 or Windows XP, install “WinASPI”. You can use the “ImageMixer Ver. 1.5 for • If DirectX8.0a or a later version is not installed Sony” software to copy, view and edit in your computer, the “Information” screen images, and create video CDs. For details, appears. Follow the procedure on the screen. see the software’s help files. c Restart your computer a Click [ImageMixer] on the according to the screen. installing menu screen. d Remove the CD-ROM.

Select the desired language,

The “InstallShield Wizard” screen then click [OK]. closes. If you wish to continue with the installation of “ImageMixer,” click [ImageMixer] on the installing menu screen and then follow the procedure. • The USB driver is needed in order to use “Image Transfer.” If the necessary driver is not already installed on your computer, a screen that asks if you want to install the driver will appear. Follow the instructions that appear on the screen. The “Welcome to the InstallShield Wizard” screen appears. • This section describes the English screen. b Follow instructions on each succeeding screen. Install “ImageMixer” according to the screen. Enjoying images on your computer,

Connecting the camera to d Connect the USB cable to the f Connect the camera to the

your computer (USB) jack of the USB USB cradle and turn on the cradle. camera. a Turn on your computer.

POWER

b Insert the “Memory Stick Duo” with the images you want to copy into the camera. • For further details on the “Memory Stick Duo,” see page 19. c Connect the USB cradle USB cable (supplied) and the AC Adaptor • Make sure the camera is securely connected to (supplied), and plug the the USB cradle. adaptor into a wall outlet (wall e Connect the USB cable to your socket). USB Mode AC Adaptor computer. Normal Access To a wall outlet USB cradle indicators*(wall socket) “USB Mode Normal” appears on the 2 LCD screen of the camera. When a USB connection is established for the first time, your computer automatically runs the used program to recognize the 1 camera. Wait for a while. * During communication, the access indicators turn red. • When you copy images to your computer using • If “USB Mode Normal” does not appear in step • When you use a desktop computer, we the battery pack, battery shutoff may cause 6, confirm that [USB Connect] is set to recommend that you connect the USB cable to copying to fail or data corruption. In addition, [Normal] on the Setup screen (page 115). the USB connector on the rear panel. power is not supplied from the USB cable, so • Do not remove the camera from the USB we recommend that you use the AC Adaptor. • When using Windows XP, the AutoPlay wizard cradle during USB connection, as the automatically appears on the desktop. Proceed image data may be destroyed. To end to page 89. the USB connection, see the note P on page 87.,

P Disconnecting the USB Copying images using — Windows XP

cable from your computer, “Image Transfer” Connect the camera and your removing the “Memory Stick — Windows 98/98SE/2000/Me computer with the USB cable and

Duo” from your camera or the USB cradle.

turning off the power during Connect the camera and your “Image Transfer” starts up automatically computer with the USB cable and and the images are automatically copied to

USB connection the USB cradle. the computer.

“Image Transfer” launches and the images Windows XP is set so that the OS AutoPlay For Windows 2000, Me or XP users are automatically copied to the computer. Wizard activates. 1 Double-click on the tasktray. When copying is complete, “ImageMixer” If you want to cancel the setting, follow the automatically launches and images appear. procedure below. a Click [Start], then click [My Computer]. Double-click here b Right-click [Sony 2 Click (Sony DSC), then click [Stop]. MemoryStick], then click 3 Confirm the device on the confirmation [Properties]. screen, then click [OK]. c Cancel the setting. 4 Click [OK]. 1 Click [AutoPlay]. Step 4 is unnecessary for Windows XP 2 Set [Content type] to [Pictures]. users. 3 Check [Select an action to perform] 5 Disconnect the USB cable, remove the • Normally “Image Transfer” and “Date” folders under [Actions], select [Take no are created inside the “My Documents” folder, “Memory Stick Duo” or turn off the action], then click [Apply].and all of the image files recorded with the power. camera are copied into these folders. 4 Set [Content type] to [Video files] • You can change the “Image Transfer” settings and proceed step 3. Set [Content For Windows 98 or 98SE users (page 88). type] to [Mixed content] and Confirm that the access indicators (page 86) proceed step 3. on the LCD screen are turned white and 5 Click [OK]. carry out only step 5 above. The [Properties] screen closes. The OS AutoPlay Wizard does not start up automatically even if the USB connection is made next time. Enjoying images on your computer,

Changing “Image Transfer” Copying images without When an image with the same

settings using “Image Transfer” file name exists in the copy destination folder You can change “Image Transfer” settings. — Windows 98/98SE/2000/Me The overwrite confirmation message Right-click the “Image Transfer” icon on If you do not set to launch “Image Transfer” appears. When you overwrite the existing the tasktray, select [Open Settings]. The automatically, you can copy images as image with the new one, the original file settings you can set are as follows: [Basic], following procedure. data is deleted. [Copy], and [Delete]. a Double-click [My Computer], then double-click [Removable To change the file name To copy an image file to the computer Disk]. without overwriting, change the file name Right-click here The contents of the “Memory Stick to the desired name. However, note that if Duo” inserted in your camera appear. you change the file name, you may not be When the “Image Transfer” starts, the able to play back that image with your below window appears. • This section describes an example of copying camera. To play back images with the images to the “My Documents” folder. • When the “Removable Disk” icon is not shown, camera, perform the operation on page 92. see page 89. • When using Windows XP, see page 89. b Double-click [DCIM], then double-click the folder which contains the desired images. The folder opens. c Right-click the image, then When you select [Settings] from the above click [Copy]. window, you can only change the [Basic] d Double-click the “My setting. Documents” folder. Right-click the inside of the folder, then click [Paste]. The image files are copied to the “My Documents” folder., When a removable disk icon is not — Windows XP e Select [Nothing. I’m finished shown Copying images using the working with these pictures], 1 Right-click [My Computer], then click Windows XP AutoPlay Wizard then click [Next]. [Properties]. The “Completing the Scanner and The “System Properties” screen appears. a Make a USB connection Camera Wizard” screen appears. (page 86). Click [Copy pictures 2 Display [Device Manager]. to a folder on my computer f Click [Finish]. 1 Click [Hardware]. 2 Click [Device Manager]. using Microsoft Scanner and The wizard closes. • When using Windows 98, 98SE or Me, skip Camera Wizard], then click • To continue copying other images, follow the step 1. Click [Device Manager] tab. [OK]. procedure given under P on page 87 to 3 Delete “ Sony DSC” if it appears. The “Scanner and Camera Wizard” disconnect the USB cable and reconnect it. 1 Right-click [ Sony DSC]. screen appears. Then, perform the procedure from step 1 Click [Uninstall]. (When using again.2 b Click [Next]. Windows 98, 98SE or Me, click The images stored on the “Memory [Remove].) Stick Duo” are displayed. The “Confirm Device Removal” screen appears. c Click the checkbox of images 3 Click [OK]. that you do not want to copy to The device is deleted. your computer and remove the checkmark, then click [Next]. Try the USB driver installation again using The “Picture Name and Destination” the CD-ROM (supplied) (page 83). screen appears. d Select a name and destination for your pictures, then click [Next]. Image copying starts. When the copying is completed, the “Other Options” screen appears. Enjoying images on your computer,

Viewing images on your Image file storage

computer destinations and file names a Click [Start] t [My Image files recorded with your camera are

Documents] in that order. grouped as folders in the “Memory Stick

Duo.” The “My Documents” folder contents are displayed. Example: For Windows XP users • This section describes the procedure for viewing copied images in the “My Documents” folder. • Except for Windows XP, double-click [My Documents] on the desktop. • You can use the “ImageMixer Ver. 1.5 for Sony” software to view and edit images on your computer. For details, see the software’s help files. Folder containing image data recorded using a camera without the folder creation function b Double-click the desired image file. Folder containing image data recorded with this The image is displayed. camera When no new folders have been created, this is only “101MSDCF” Folder containing E-mail mode image data, movie data and Voice mode audio data recorded using a camera without the folder creation function • Data in the “100MSDCF” or “MSSONY” folders is for playback only, and your camera cannot record images in these folders. • For more information about the folder, see page 45., Folder File name File meaning 101MSDCF up to DSC0ssss.JPG • Still image files shot in 999MSDCF – Normal mode – Exposure Bracket mode (page 52) – Burst mode (page 55) – Multi Burst mode (page 56) • Still image files recorded simultaneously in – E-Mail mode (page 57) – Voice mode (page 58) DSC0ssss.JPE • Small-size image files shot in E-Mail mode (page 57) DSC0ssss.MPG • Audio files shot in Voice mode (page 58) MOV0ssss.MPG • Movie files (page 77) MOV0ssss.THM • Index image file recorded simultaneously in movie mode (page 77) • ssss stands for any number within the range from 0001 to 9999. • The numerical portions of the following files are the same. – A small-size image file shot in E-Mail mode and its corresponding image file – An audio file shot in Voice mode and its corresponding image file – A movie file shot in movie mode and its corresponding index image file Enjoying images on your computer,

Viewing image files once b Copy the file to the “Memory

copied to a computer with Stick Duo” folder. your camera 1 Right-click the image file, then click [Copy]. When an image file copied to a computer no 2 Select the “DCIM” folder within longer remains in a “Memory Stick Duo,” the [Removable Disk] or [Sony you can view that image again on your MemoryStick] from [My camera by copying the image file in the Computer]. computer to a “Memory Stick Duo.” 3 Right-click the [sssMSDCF] folder in the “DCIM” folder and • Step 1 is not necessary when the file name set click [Paste]. sss is a number with your camera has not been changed. from 100 to 999. • You may be unable to play back some images depending on the image size. • When the overwrite confirmation message • When an image file has been processed by a appears, enter a different number in step 1. computer or when the image file was recorded • When there is no folder, first create a folder using a model other than your camera, playback with your camera and then copy the image file on your camera is not guaranteed. (page 45). a Right-click the image file, then click [Rename].

Change the file name to

“DSC0ssss.” Enter a number from 0001 to 9999 for ssss. • An extension may be displayed depending on the computer settings. The extension for still images is JPG, and the extension for moving images is MPG. Do not change the extension.,

USB mode a Connecting your camera to Copying images to There are two modes for connecting to a your computer

your computer computer, [Normal] and [PTP]* modes. For details, see page 86. — For Macintosh users The factory setting is the [Normal] mode. This section describes the [Normal] mode Disconnecting the USB cable from your as an example. computer, removing the “Memory Stick

Recommended computer

* Compatible only with Mac OS X. When Duo” from your camera or turning off environment connected to a computer, only the data in the the power during a USB connection OS: Mac OS 9.1, 9.2 or Mac OS X (v10.0/ folder selected by the camera is copied to the Drag and drop the drive icon or the v10.1/v10.2) computer. To select a folder, perform the “Memory Stick” icon to the “Trash” icon, The above OS must be installed at the procedure on page 60. then remove the USB cable or “Memory factory. Communication with your Stick Duo” or turn off the power.USB connector: Provided as standard • If you are using Mac OS X v10.0, remove the Display: 800 × 600 dots or more computer USB cable, etc., after you have turned your 32,000-color mode or more When your computer resumes from the computer off. suspend or sleep mode, communication • If you connect two or more USB equipment to between your camera and your computer b Copying images a single computer at the same time, some may not recover at the same time. 1 Double-click the newly recognized icon equipment, including your camera, may not operate depending on the type of USB When a USB connector is not on the desktop. equipment. provided on your computer The contents of the “Memory Stick • Operations are not guaranteed when using a Duo” inserted in your camera appear. USB hub. When neither a USB connector nora2Double-click [DCIM]. • Operations are not guaranteed for all the “Memory Stick” slot is provided, you can recommended computer environments copy images using an additional device. See 3 Double-click the folder containing the mentioned above. the Sony Website for details. desired image file. http://www.sony.net/ 4 Drag and drop the image files to the hard disk icon. The image files are copied to your hard disk. • See pages 90 and 91 for details about the image file storage destinations and file names. Enjoying images on your computer, c Viewing the images on your For Mac OS X users computer If the “There is no application available to open the document “DSC0ssss.JPE”.” 1 Double-click the hard disk icon. screen appears when you click an E-mail 2 Double-click the desired image file in mode image file, make the following the folder containing the copied files. setting. The image file opens. The screen display may differ depending on the version. • Close down all applications running on the computer before installing the 1 Click [Choose Application...] at the application. “There is no application available to • You can use the “ImageMixer Ver. 1.5 for open the document Sony” software to copy, view and edit images, and create video CDs. See the operation manual “DSC0ssss.JPE”.” screen. supplied with the CD-ROM for details about 2 Change “Show” from [Recommended the installation method, or see the software’s Applications] to [All Applications]. help files for the operation method. • When images cannot be displayed, increase the 3 Select [QuickTime Player] from the virtual memory capacity of the computer. displayed list of applications, and click • “ImageMixer” is not compatible with Mac OS [Open]. X. • “Image Transfer” cannot be used with Macintosh., Troubleshooting 2 Should your camera still not work 3 Should your camera still not work

Troubleshooting properly, press the RESET button on the properly, consult your Sony dealer or

lower right side of the control button local authorized Sony service facility. If you experience trouble with your camera, using a fine-tipped object, then turn on try the following solutions. the power again. (All the settings 1 First check the items on the tables below. including date and time are cleared.) If code displays “C:ss:ss” appear on the LCD screen, the self-diagnosis display function is RESET button working (page 107).

Battery pack and power

Symptom Cause Solution You cannot charge the • The camera is turned on. p Turn the camera off (page 16). battery pack. • The battery pack is not installed correctly. p Install the battery pack correctly (page 11). The /CHG lamp flashes • The battery pack is not installed correctly. p Install the battery pack correctly (page 11). when charging a battery • The battery pack is discharged. p Re-insert the AC Adaptor and then charge the battery pack pack. (page 11). • The battery pack has malfunctioned. p Consult your Sony dealer or local authorized Sony service facility. The /CHG lamp does not • The AC Adaptor is disconnected. p Properly connect the AC Adaptor (page 11). light up when charging a • The AC Adaptor has malfunctioned. p Consult your Sony dealer or local authorized Sony service battery pack. facility. • The battery pack is not installed correctly. p Install the battery pack correctly (page 11). • The battery pack is discharged. p Re-insert the AC Adaptor and then charge the battery pack (page 11). • The battery pack is completely charged. — • The camera is not properly installed to the USB p Properly install the camera (page 10). cradle. Troubleshooting, Symptom Cause Solution The battery remaining • You have used the camera for a long time in an p See page 119. indicator is incorrect, or extremely hot or an extremely cold location. sufficient battery • A deviation has occurred in the remaining p Fully discharge and then charge the battery pack so that the remaining indicator is battery time. battery remaining indicator functions correctly (page 13). displayed but the power • The battery pack is discharged. p Install a charged battery pack (page 11). runs out soon. • The battery pack is dead (page 120). p Replace the battery pack with a new one. The battery pack runs • You are shooting/viewing images in an — down too quickly. extremely cold location. • The battery terminal is dirty. p Clean the battery terminal with a cotton swab, etc., and charge the battery pack. • The battery pack is dead (page 120). p Replace the battery pack with a new one. You cannot turn on the • The battery pack is not installed correctly. p Install the battery pack correctly (page 11). camera. • The AC Adaptor is disconnected. p Properly connect the AC Adaptor (page 15). • The AC Adaptor has malfunctioned. p Consult your Sony dealer or local authorized Sony service facility. • The battery pack is discharged. p Install a charged battery pack (page 11). • The battery pack is dead (page 120). p Replace the battery pack with a new one. • The camera is not properly installed to the USB p Properly install the camera (page 10). cradle. The power turns off • If you do not operate the camera for about three p Turn on the camera again (page 16) or use the AC Adaptor suddenly. minutes when using a battery pack, the camera (page 15). turns off automatically to prevent wearing down the battery (page 16). • The battery pack is discharged. p Install a charged battery pack (page 11). • The camera is not properly installed to the USB p Properly install the camera (page 10). cradle.

Shooting still images/movies

Symptom Cause Solution The LCD screen is not • The LCD backlight is turned off with in the p Turn on the LCD backlight with (page 25). turned on even when the dark place. power is turned on. The subject is not visible • The mode switch is not set to or . p Set it to or (pages 22 and 77). on the LCD screen., Symptom Cause Solution The LCD screen turns • The image size is set to [640(Fine)] while an A/ p Disconnect the A/V connecting cable. blue and the subject does V connecting cable is connected to the A/V OUT p Set the image size to other than [640(Fine)]. not appear when (MONO) jack. recording movies. The image is out of focus. • The subject is too close. p Use close-up (Macro) function and set the lens position father away from the subject than the shortest shooting distance (page 27). Or, set (Camera) in the menu to (Magnifying glass mode) and focus within the range of 1 cm to 20 cm (13/32 inch to 7 7/8 inches) from the subject (page 32). • When shooting still images, (Camera) in the p Set it to other settings (page 32). menu is set to (Magnifying glass mode), (Twilight mode), (Landscape mode) or (Fireworks mode). • The focus preset function is selected. p Cancel the function (page 49). Zoom does not function. • You cannot change the zoom scale when — shooting movies. Optical zoom does not • When shooting still images, (Camera) in the p Set it to other settings (page 32). function. menu is set to (Magnifying glass mode). Digital zoom does not • [Digital Zoom] is set to [Off] on the Setup p Set [Digital Zoom] to [Smart] or [Precision] (pages 44 and 114). function. screen. • The image size is set to [5M] or [3:2] (only when p Set image size to other settings except [5M] and [3:2] (page 20). using the smart zoom). • You are shooting in Multi Burst mode (only p Set [Digital Zoom] to [Precision] (pages 44 and 114). when using the smart zoom). The image is too dark. • You are shooting a subject with a light source p Adjust the exposure (page 50). behind the subject. • The brightness of the LCD screen is too low. p Adjust the brightness of the LCD screen (pages 44 and 115). • The LCD backlight is turned off. p Turn on the LCD backlight with (page 25). The image is too bright. • You are shooting a spotlighted subject in a dark p Adjust the exposure (page 50). location such as on a stage. • The brightness of the LCD screen is too bright. p Adjust the brightness of the LCD screen (pages 44 and 115). Vertical streaks appear • The smear phenomenon is occurring. p This is not a malfunction. when you are shooting a very bright subject. Troubleshooting, Symptom Cause Solution Noise appears in the • The camera is functioning to increase the p There is no effect on the recorded image. image when you view the visibility of the LCD screen by temporarily LCD screen in a dark brightening the image under conditions of low place. illumination. Your camera cannot • No “Memory Stick Duo” has been inserted. p Insert a “Memory Stick Duo” (page 19). record images. • The “Memory Stick Duo” is full. p Delete unnecessary images (pages 39 and 79). p Change the “Memory Stick Duo.” • You are using a “Memory Stick Duo” withapSet it to the recording position (page 118). write-protect switch, and the write-protect switch is set to the LOCK position. • You cannot record images while charging the — flash. • The mode switch is not set to when shooting p Set it to (page 22). a still image. • The mode switch is not set to when shooting p Set it to (page 77). a movie. • The image size is set to [640(Fine)] when p Insert a “Memory Stick PRO Duo” (pages 77 and 117). recording movies. p Set the image size to other than [640(Fine)]. The flash does not work. • The mode switch is not set to . p Set it to (page 22). • The flash is set to (No flash). p Set the flash to auto (No indicator), (Forced flash) or SL (Slow synchro) (page 29). • When shooting still images, (Camera) in the p Set it to other settings (page 32). menu is set to (Twilight mode) or (Fireworks mode). • (Camera) in the menu is set to p Set the flash to (Forced flash) (page 29). (Magnifying glass mode), (Landscape mode), (Snow mode), (Beach mode) or (High-speed shutter mode). • [Mode] (REC Mode) in the menu is set to [Multi p Set it to other settings. Burst], [Exp Brktg], [Speed Burst] or [Framing Burst]. The close-ups (Macro) • When shooting still images, (Camera) in the p Set it to other settings (page 32). function does not work. menu is set to (Magnifying glass mode), (Twilight mode), (Landscape mode) or (Fireworks mode)., Symptom Cause Solution The eyes of the subject — p Set [Red Eye Reduction] on the Setup screen to [On] (pages 29 come out red. and 114). The date and time are • The date and time are not set correctly. p Set the correct date and time (pages 17 and 115). recorded incorrectly. The F value and shutter • The exposure is incorrect. p Correct the exposure (page 50). speed flash when you press and hold the shutter button halfway down.

Viewing images

Symptom Cause Solution Your camera cannot play • The mode switch is not set to . p Set it to (page 35). back images. • The folder/file name has been changed on your p See page 92. computer. • Your camera cannot play back image files — copied from the hard disk of your computer if the image has been modified. • The camera is set to USB mode. p Finish the USB connection (pages 87 and 93). The image appears rough • The image may appear rough right after p This is not a malfunction. right after playback starts. playback starts due to the image processing. The image does not • The video output signal setting of your camera p Change the setting (pages 44 and 115). appear on the TV screen. on the Setup screen is incorrect. • The connection is not correct. p Check the connection (page 37). • The USB jack is connected. p Follow the procedure of the note P on page 87 (Windows) or 1 on page 93 (Macintosh) and disconnect the USB cable. The image cannot be — p See page 100. played back on a computer. Troubleshooting,

Deleting/Editing Images

Symptom Cause Solution Your camera cannot • The image is protected. p Cancel the protection (page 66). delete an image. • You are using a “Memory Stick Duo” withapSet it to the recording position (page 118). write-protect switch, and the write-protect switch is set to the LOCK position. You have deleted an • Once you have deleted an image, you cannot p Marking - (protect) will prevent you from deleting images by image by mistake. restore it. mistake (page 66). p Accidental deletion can be prevented by setting the write- protect switch of a “Memory Stick Duo” that has a write-protect switch to the LOCK position (page 118). The resizing function • You cannot resize movies and Multi Burst — does not work. images. You cannot display a print • You cannot display print (DPOF) marks on — (DPOF) mark. movies. You cannot cut images. • The movie is not long enough to cut. — • Protected movie cannot be cut. p Cancel the protection (page 66). • Still images cannot be cut. —

Computers

Symptom Cause Solution You do not know if the OS — p Check “Recommended computer environment” (pages 82 and of your computer is 93). compatible. You cannot install the — p In Windows 2000, log on as Administrator (authorized USB driver. Administrators) (page 82)., Symptom Cause Solution Your computer does not • The camera is turned off. p Turn on the camera (page 16). recognize your camera. • The battery level is low. p Use the AC Adaptor (page 15). • You are not using the supplied USB cable. p Use the supplied USB cable (page 86). • The USB cable is not connected firmly. p Disconnect the USB cable from both the computer and the USB cradle, and connect it again firmly. Make sure that “USB Mode” is displayed on the LCD screen (page 86). • The camera is not properly installed to the USB p Properly install the camera (page 10). cradle. • [USB Connect] is set to [PTP] or [PictBridge]on p Set it to [Normal] (pages 44 and 115). the Setup screen. • The USB connectors on your computer are p Disconnect all equipment other than the keyboard, the mouse connected to other equipment besides the and the USB cradle from the USB connectors. keyboard, the mouse and the USB cradle. • The camera is not connected directly to your p Connect the camera directly to your computer without passing computer. through a USB hub or other device. • The USB driver is not installed. p Install the USB driver (page 83). • Your computer does not properly recognize the p Delete the incorrectly recognized device from your computer device because you connected the camera and (page 89), then install the USB driver (page 83). your computer with the USB cable before you installed the “USB Driver” from the CD-ROM (supplied). You cannot copy images. • The camera is not correctly connected to your p Connect the camera and your computer correctly using the USB computer. cable (page 86). • You are not using the correct copy procedure for p Follow the designated copy procedure for your OS (pages 88, 89 your OS. and 93). — p If you use the “Image Transfer” software, see page 87. — p If you are using the “ImageMixer Ver. 1.5 for Sony” application software, click on HELP. After making a USB — p Select [Launch Image Transfer automatically when your connection, “Image camera, etc., is connected.] at [Basic] setting (page 88). Transfer” does not — p Make a USB connection when the computer is turned on automatically start. (page 86). The image cannot be — p If you are using the “ImageMixer Ver. 1.5 for Sony” application played back on a software, click on HELP. computer. — p Consult the computer or software manufacturer. Troubleshooting, Symptom Cause Solution The image and sound are • You are playing back the file directly from the p Copy the file to the hard disk of your computer and then play interrupted by noise when “Memory Stick Duo.” back the file from the hard disk (pages 87, 88, 89 and 93). you view a movie on a computer. You cannot print an — p Check the printer settings. image. — p Click on HELP for the “ImageMixer Ver. 1.5 for Sony” application software. An error message appears • The computer display is not set correctly. p Set the computer display as follows: when you set the CD-ROM Windows: 800 × 600 dots or more (supplied) in your High Color (16-bit color, 65,000 colors) or more computer. Macintosh: 800 × 600 dots or more 32,000-color mode or more “Memory Stick Duo” Symptom Cause Solution You cannot insert a • You are inserting it incorrectly. p Insert it from the right side (page 19). “Memory Stick Duo.” You cannot record on a • You are using a “Memory Stick Duo” withapSet it to the recording position (page 118). “Memory Stick Duo.” write-protect switch, and the write-protect switch on the “Memory Stick Duo” is set to the LOCK position. • The “Memory Stick Duo” is full. p Delete unnecessary images (pages 39 and 79). pInsert a “Memory Stick PRO Duo” (pages 77 and 117). • The image size is set to [640(Fine)] when p Set the image size to other than [640(Fine)]. recording movies. You cannot format a • You are using a “Memory Stick Duo” withapSet it to the recording position (page 118). “Memory Stick Duo.” write-protect switch, and the write-protect switch on the “Memory Stick Duo” is set to the LOCK position. You have formatted a • All the data on the “Memory Stick Duo” are p We recommend that you set the “Memory Stick Duo” write- “Memory Stick Duo” by deleted by formatting. You cannot restore them. protect switch to the LOCK position to prevent accidental mistake. erasure (page 118).,

PictBridge compliant printer

Symptom Cause Solution You cannot connect with • The printer is not compliant with the PictBridge. p Consult with the printer manufacturer. the printer. • The printer condition does not allow connection. p Turn on the printer and check that it is in a condition that allows connection. • [USB Connect] is not set to [PictBridge] on the p Set it to [PictBridge]. Setup screen. • Depending on the circumstances, the connection p Disconnect and connect the USB cable again. If an error may not be established. message is indicated on the printer, refer to the operating instructions supplied with the printer. You cannot print. • The printer is not connected. p Check that the camera and the printer are connected correctly using a USB cable. • The printer is not turned on. p Turn on the printer. See the operating instructions of the printer for details. • If you select [Exit] during printing, you may not p Disconnect and connect the USB cable again. If you cannot print again depending on your printer. print still, disconnect the USB cable, turn off and on the printer, then connect the USB cable again. • You cannot print movies. — • You may be unable to print some still images — recorded using a model other than this camera or images that have been processed by a computer. Printing stops partway. • You disconnected the USB cable before the — indicator disappeared. Date/time insertion and • The printer does not support date/time insertion p Contact the manufacturer regarding whether the printer index print are not and index print. supports date/time insertion and index print. possible. • Some printers cannot insert the date/time with p Contact the printer manufacturer. index print. “- - -” is printed in the • The image file does not contain printable p You cannot perform date/time printing for image files that do date/time portion. recording date/time data. not contain printable recording date/time data. Set [Date] to [Off] and then print the image (page 72). Troubleshooting,

Others

Symptom Cause Solution Your camera does not • You are not using an “InfoLITHIUM” battery p Use an “InfoLITHIUM” battery pack (page 119). work. pack. • The battery level is low. (The E indicator p Charge the battery pack (page 11). appears.) • The AC Adaptor is not connected securely. p Connect it securely to the multi connector of your camera and to a wall outlet (wall socket) (page 15). • The camera is not properly installed to the USB p Properly install the camera (page 10). cradle. The power is on, but the • The built-in microcomputer is not working p Disconnect, and then, after one minute, reconnect all power camera does not work. properly. sources and turn on the camera. If this does not work, press the RESET button on the lower side of the control button using a fine-tipped object, then turn on the power again. (All the settings including date and time are cleared.) You cannot identify an — p Check the indicator (pages 122 to 125). indicator on the LCD screen. The lens gets fogged. • Moisture condensation has occurred. p Turn off the camera and leave for about an hour at room temperature for the moisture to evaporate before use (page 116). The camera becomes — p This is not a malfunction. warm when you use it for a while.,

Warnings and

messages The following messages may appear on the LCD screen. Message Meaning/Corrective Action No Memory Stick • Insert a “Memory Stick Duo” (page 19). System error • Turn the power off and on again (page 16). Memory Stick error • The inserted “Memory Stick Duo” cannot be used in your camera (page 117). • The “Memory Stick Duo” is damaged, or the terminal section of the “Memory Stick Duo” is dirty. • Insert the “Memory Stick Duo” correctly (page 19). Memory Stick type error • The inserted “Memory Stick Duo” cannot be used in your camera (page 117). Format error • Failed to format the “Memory Stick Duo.” Format the “Memory Stick Duo” again (page 41). • Re-insert the “Memory Stick Duo” several times (page 19). Memory Stick locked • You are using a “Memory Stick Duo” with a write-protect switch, and the write-protect switch on the “Memory Stick Duo” is set to the LOCK position. Set it to the recording position (page 118). No memory space • The capacity of the “Memory Stick Duo” is insufficient. You cannot record images. Delete unnecessary images or data (pages 39 and 79). Read only memory • Your camera cannot record or delete images to this “Memory Stick Duo.” No file in this folder • No images have been recorded in this folder. Folder error • A folder with the same first three digits number already exists in the “Memory Stick Duo.” (For example: 123MSDCF and 123ABCDE) Select other folders, or create a new folder. Cannot create more folders • The folder whose first three digits of the name is “999” exists in the “Memory Stick Duo.” You cannot create any folders. Cannot record • The camera cannot record images in the selected folder. Select a different folder (page 45). File error • An error occurred while playing back the image. For "InfoLITHIUM" battery • The battery pack is not the “InfoLITHIUM” type. only Image size over • You are playing back an image of a size that cannot be played back on your camera. Troubleshooting, Message Meaning/Corrective Action Cannot divide • The movie is not long enough to be divided. • The file is not a movie. Invalid operation • You are playing back a file that was created on equipment other than this camera. • The battery level is low or zero. Charge the battery pack (page 11). Depending on the conditions of use or the type of battery pack, the indicator may flash even though there are still 5 to 10 minutes of remaining battery time left. • The amount of lights is not sufficient, so you are not holding the camera steady enough. Use the flash, secure the camera in place. But the vibration warning indicator does not disappear. • The camera is unsteady, so vibration easily occurs. Hold the camera steady with both hands and shoot the image. However, note that the vibration warning indicator does not disappear. 640(Fine) is not available • Insert a “Memory Stick PRO Duo.” Connect to device • You attempted to print before connecting a printer. Connect the PictBridge compliant printer. Enable printer to connect • The camera is set to [PictBridge], but it is connected to a device that does not support PictBridge. Check the connected device. • Depending on the circumstances, the connection may not be established. Disconnect and connect the USB cable again. If an error message is indicated on the printer, refer to the operating instructions supplied with the printer. Printer busy • The connected printer is currently printing or otherwise cannot accept print requests. Check the connected printer. Paper error • The connected printer is out of paper, the paper has jammed, or some other paper error has occurred. Check the connected printer. Ink error • The connected printer has some ink error. Check the connected printer. Printer error • The camera has received an error notification from the printer. Check the connected printer, or check whether the images to be printed have been damaged. No printable image • You attempted to execute [DPOF image] without making print marks. • You attempted to execute [All In This Folder] for a folder that contains only movies. You cannot print movies. • The data transmission to the printer may not be completed yet. Do not disconnect the USB cable.,

Self-diagnosis display Code Cause Corrective action

C:32: ss There is trouble with your Turn the power off and on again (page 16). – If a code starting with an alphabet camera’s hardware. letter appears C:13: ss The camera cannot read or write Re-insert the “Memory Stick Duo” several Your camera has a self-diagnosis display. data on the “Memory Stick Duo.” times. This function displays the camera condition An unformatted “Memory Stick Format the “Memory Stick Duo” (page 41). on the LCD screen with a combination of a Duo” is inserted. letter and four numerical digits. If this The inserted “Memory Stick Insert a new “Memory Stick Duo” occurs, check the following code chart and Duo” cannot be used with your (page 19). attempt the corresponding corrective camera, or the data is damaged. actions. The last two digits (indicated by E:61: ss A camera malfunction that you Press the RESET button (page 95) located ) will differ depending on the state of E:91: ss cannot reverse has occurred. on the lower right side of the control button, ss then turn on the power again. the camera. If you are unable to solve the problem even after trying the corrective actions a few C:32:ss times, contact your Sony dealer or local authorized Sony service facility. Self-diagnosis display Troubleshooting, Additional information E-Mail (Units: images)

Number of images 16MB 32MB 64MB 128MB MSX-M256 MSX-M512

that can be saved or 5M 6 (11) 12 (23) 25 (46) 50 (94) 91 (170) 186 (345) shooting time 3:2 6 (11) 12 (23) 25 (46) 50 (94) 91 (170) 186 (345) 3M 9 (17) 20 (35) 40 (71) 80 (143) 145 (255) 296 (518) The number of images that can be saved and the shooting time differ, depending on the 1M 23 (42) 47 (85) 96 (171) 192 (343) 340 (595) 691 (1210) capacity of the “Memory Stick Duo,” the VGA 81 (162) 163 (327) 328 (657) 658 (1317) 1190 (2381) 2420 (4841) image size, and the image quality. Refer to the following charts when you choose a Voice (Units: images) “Memory Stick Duo.” 16MB 32MB 64MB 128MB MSX-M256 MSX-M512 • The number of images is listed in Fine 5M 6 (11) 12 (22) 25 (45) 50 (91) 90 (166) 183 (337) (Standard) order. 3:2 6 (11) 12 (22) 25 (45) 50 (91) 90 (166) 183 (337) • The values for the number of images that 3M 9 (17) 19 (34) 39 (69) 79 (138) 142 (246) 290 (500) can be saved and the shooting time may 1M 22 (38) 45 (78) 91 (157) 183 (316) 324 (549) 660 (1117) vary, depending on the shooting VGA 69 (121) 140 (245) 281 (492) 564 (987) 1020 (1785) 2074 (3630) conditions. • For normal shooting times and numbers When the recording time is five seconds of images that can be saved, see page 21. Multi Burst (Units: images) • When the number of remaining shooting images is greater than 9999, the “>9999” 16MB 32MB 64MB 128MB MSX-M256 MSX-M512 indicator appears on the LCD screen. 1M 24 (46) 50 (93) 101 (187) 202 (376) 357 (649) 726 (1320), Movie 16MB 32MB 64MB 128MB MSX-M256 MSX-M512 640(Fine) — — — — 0:02:57 0:06:02 640(Standard) 0:00:42 0:01:27 0:02:56 0:05:54 0:10:42 0:21:47 160 0:11:12 0:22:42 0:45:39 1:31:33 2:51:21 5:47:05 Recording time notation The time is indicated as hours, minutes, seconds in order from the left. Example: [1:10:28] t 1 hour, 10 minutes, 28 seconds Additional information,

Menu items

Menu items that can be modified differ depending on the position of the mode switch. Factory settings are indicated with x.

When the mode switch is set to

Item Setting Description (Camera) / / / / / / / Selects the camera mode (page 23). / Program / xAuto (EV)1) +2.0EV / +1.7EV / +1.3EV / +1.0EV / Adjusts the exposure (page 50). +0.7EV / +0.3EV / x0EV / –0.3EV / –0.7EV / –1.0EV / –1.3EV / –1.7EV / –2.0EV 9 (Focus)1) 5) / 7.0m / 3.0m / 1.0m / 0.5m / Chooses the auto focus method (page 47), or sets the focus preset distance Spot AF / Center AF / xMulti AF (page 49). (Metering Spot / xMulti Adjusts the exposure to the subject you are shooting (page 52). Sets the metering Mode)1) region. WB (White Bal)1) 5) WB / / / / / xAuto Sets the white balance (page 54). ISO1) 400 / 200 / 100 / xAuto Selects the ISO sensitivity. Select a large number when shooting in dark locations or shooting a subject moving at high speed, or select a small number to obtain high image quality. • Note that the image tends to become noisier as the ISO sensitivity number increases. (P.Quality)1) xFine / Standard Records images with fine/standard quality (page 44)., Item Setting Description Mode (REC Mode)5) Voice – Records an audio file (with a still image) in addition to the JPEG file (page 58). E-Mail – Records a small-size (320×240) JPEG file in addition to the selected image size (page 57). Multi Burst – Records a continuous burst of 16 frames within a single still image in a single press of the shutter button (image size 1M) (page 56). Exp Brktg – Records three images with the exposure value of each image slightly shifted (page 52). Framing Burst – Records a Multi Burst series of images while displaying the images on the LCD screen (page 55). Speed Burst – Records a Multi Burst series of images with a short shooting interval (page 55). xNormal – Records an image using the normal recording mode. BRK (Bracket ±1.0EV / x±0.7EV / ±0.3EV Sets the exposure compensation value when recording three images with each Step)3) exposure adjustment value (page 52). (This setting cannot be made when [Mode] (REC Mode) in the menu is set to other than [Exp Brktg].) M (Interval)3) 1/7.5 / 1/15 / x1/30 Selects the Multi Burst shutter interval (page 56). (This setting cannot be made when [Mode] (REC Mode) in the menu is set to other than [Multi Burst].) ± (Flash Level)4) High / xNormal / Low Selects the amount of flash light (page 55). PFX (P.Effect)1) Solarize / Sepia / Neg. Art / xOff Sets the image special effects (page 58). (Saturation)2) + / xNormal / – Adjusts the saturation of the image. The indicator appears (except when the setting is Normal). (Contrast)2) + / xNormal / – Adjusts the contrast of the image. The indicator appears (except when the setting is Normal). (Sharpness)2) + / xNormal / – Adjusts the sharpness of the image. The indicator appears (except when the setting is Normal). 1) This does not appear when (Camera) in the menu is set to [Auto]. 2) This does not appear when (Camera) in the menu is set to other than [Program]. 3) This does not appear when (Camera) in the menu is set to [Auto], (Magnifying glass mode), (Twilight mode), (Twilight portrait mode) or (Fireworks mode). 4) This does not appear when (Camera) in the menu is set to [Auto], (Twilight mode) or (Fireworks mode). 5) The available settings are limited according to the (Camera) setting in the menu. Additional information,

When the mode switch is set to

Item Setting Description (EV) +2.0EV / +1.7EV / +1.3EV / +1.0EV / Adjusts the exposure (page 50). +0.7EV / +0.3EV / x0EV / –0.3EV / –0.7EV / –1.0EV / –1.3EV / –1.7EV / –2.0EV 9 (Focus) / 7.0m / 3.0m / 1.0m / 0.5m / Chooses the auto focus method (page 47), or sets the focus preset distance Spot AF / Center AF / xMulti AF (page 49). (Metering Mode) Spot / xMulti Adjusts the exposure to the subject you are shooting (page 52). Sets the metering region. WB (White Bal) / / / / xAuto Sets the white balance (page 54). PFX (P.Effect) Solarize / Sepia / Neg. Art / xOff Sets the image special effects (page 58).,

When the mode switch is set to

Item Setting Description (Folder) OK / Cancel Selects the folder containing the image you want to play back (page 60). (Protect) — Protects and unprotects images against accidental erasure (page 66). (DPOF) — Marks and unmarks the print (DPOF) mark on still images you want to print (page 68). (Print) — Prints images using a PictBridge compliant printer (page 70). (Slide) Interval – Sets the slide show interval (page 62). (Only in single-image mode) x3 sec / 5 sec / 10 sec / 30 sec / 1 min Image – Sets the range of the playback images. xFolder / All Repeat – Plays back images repeatedly. xOn / Off Start – Starts the slide show. Cancel – Cancels the slide show. (Resize) 5M / 3M / 1M / VGA / Cancel Changes the recorded still image size (page 67). (Only in single-image mode) (Rotate) (counter clockwise) / Rotates the still image (page 63). (Only in single-image mode) (clockwise) / OK / Cancel (Divide) OK / Cancel Divides movie (page 81). (Only in single-image mode) Additional information,

Setup items

The Setup screen appears when you advance to in the menu and press B again. Factory settings are indicated with x. (Camera) Item Setting Description AF Mode xSingle / Monitor / Cont Selects the focus operation mode (page 48). Digital Zoom xSmart / Precision / Off Selects the digital zoom mode (page 26). Date/Time Day & Time / Date / xOff Selects whether to superimpose the date or time onto the image (page 30). The date and time are not inserted in movie or Multi Burst mode. Also, the date and time appear only during playback, and do not appear during recording. Red Eye Reduction On / xOff Reduces the red-eye phenomenon when using a flash (page 29). AF Illuminator xAuto / Off Selects whether to emit an AF assist light in the dark. Helps when it is hard to focus on the subject under dark lighting (page 30). Auto Review On / xOff Selects whether to automatically display the recorded image on the LCD screen immediately after shooting a still image. When set to [On], the recorded image is displayed for approximately two seconds. You cannot shoot the next image during this period. (Memory Stick Tool) Item Setting Description Format OK / Cancel Formats the “Memory Stick Duo.” Note that formatting erases all data on a “Memory Stick Duo,” including even protected images (page 41). Create REC. Folder OK / Cancel Creates a folder for recording images (page 45). Change REC. Folder OK / Cancel Changes a folder for recording images (page 46)., (Setup 1) Item Setting Description LCD Brightness Bright / xNormal / Dark Selects the LCD brightness. This has no effect on the recorded images. LCD Backlight Bright / xNormal Selects the brightness of the LCD backlight. Selecting [Bright] makes the screen bright and easy to see when using the camera outdoors or in other bright locations, but also uses up the battery charge faster. Displayed only when using your camera with the battery pack. Beep Shutter – Turns on the shutter sound. (The shutter sound is heard when you press the shutter button.) xOn – Turns on the beep/shutter sound when you press the control button/shutter button. Off – Turns off the beep/shutter sound. A Language — Displays the menu items, warnings and messages in selected language. (Setup 2) Item Setting Description File Number xSeries – Assigns numbers to files in sequence even if the “Memory Stick Duo” is changed or the recording folder is changed. Reset – Resets the file numbering and starts from 0001 each time the folder is changed. (When the recording folder contains a file, a number one higher than the largest number is assigned.) USB Connect PictBridge / PTP / Switches the USB mode when connecting with a computer or a PictBridge compliant printer xNormal using the USB cable (page 86). Video Out NTSC – Sets the video output signal to NTSC mode (e.g., USA, Japan). PAL – Sets the video output signal to PAL mode (e.g., Europe). Clock Set OK / Cancel Sets the date and time (pages 17 and 44). Additional information, Cleaning the DC plug On moisture condensation

Precautions Clean the DC plug of the AC Adaptor. Do If the camera is brought directly from a cold

not use the dirty plug. Use of the dirty plug to a warm location, or is placed in a very

Do not leave the camera in the may not properly charge the battery pack. damp room, moisture may condense inside

following places or outside the camera. This moisture • In extremely hot place, such as in a car Cleaning the lens condensation may cause a malfunction of parked in the sun. The camera body may Wipe the lens with a soft cloth to remove the camera. become deformed or this may cause a fingerprints, dust, etc. malfunction. Moisture condensation occurs easily • Under direct sunlight or near a heater. Cleaning the camera surface when: The camera body may become deformed Clean the camera surface with a soft cloth • The camera is brought from a cold or this may cause a malfunction. slightly moistened with water, then wipe location such as a ski slope into a warmly • On rocking vibration the surface with a dry cloth. Do not use the heated room. • Near strong magnetic place following as this may damage the finish or • The camera is taken from an air- • In sandy or dusty places, be careful not to the casing. conditioned room or car interior to the hot let sand or dust get into the camera. This • Thinner outdoors, etc. may cause the camera to malfunction, and • Benzine in some cases this malfunction cannot be • Alcohol How to prevent moisture repaired. • Disposable cloth condensation • Volatile insecticide When bringing the camera from a cold • Contact with rubber or vinyl for a long

On carrying place to a warm place, seal the camera in a

time plastic bag and allow it to adapt to Do not sit down in a chair or other place conditions at the new location over a period with the camera in the back pocket of your On operating temperature of time (about an hour). trousers or skirt, as this may cause malfunction or damage the camera. The camera is designed for use between the temperatures of 0°C and 40°C (32° F and If moisture condensation occurs

On cleaning 104° F). Shooting in extremely cold or hot Turn off the camera and wait about an hour

Cleaning the LCD screen places that exceed this range is not for the moisture to evaporate. Note that if Wipe the screen surface with an LCD recommended. you attempt to shoot with moisture remaining inside the lens, you will be cleaning kit (not supplied) to remove unable to record clear images. fingerprints, dust, etc.,

On internal rechargeable button Charging method

battery Connect the camera to a wall outlet (wall On “Memory Stick” This camera has an internal rechargeable socket) using the AC Adaptor, or install a button battery for maintaining the date and charged battery pack, and leave the camera “Memory Stick” time and other settings regardless of for 24 hours or more with the power off. whether the power is on or off. This rechargeable button battery is • The internal rechargeable button battery is continually charged as long as you are using located inside the cover in the left side of battery insertion slot of the camera. Never the camera. However, if you use the camera remove the rechargeable button battery. for only short periods it discharges gradually, and if you do not use the camera “Memory Stick Duo”Rechargeable button battery at all for about one month it becomes Only “Memory Stick Duo” can be used completely discharged. In this case, be sure with this camera. to charge this rechargeable button battery before using the camera. However, even if this rechargeable button battery is not charged, you can still use the camera as long as you do not record the date Battery insertion slot and time. “Memory Stick” is a compact, portable IC recording medium with a data capacity that exceeds the capacity of a floppy disk. The types of “Memory Stick” that can be used with this camera are listed in the following table. However, proper operation cannot be guaranteed for all “Memory Stick” functions. Additional information,

Recording/ Notes on using “Memory Stick Duo” • Do not touch the terminal of the “Memory

“Memory Stick” type

Playback3) • You cannot record, edit or delete images if you

Stick Duo” with your hand or a metal object. slide the write-protect switch4) to LOCK with a • Do not strike, bend or drop the “Memory Stick

Memory Stick – fine-tipped object. Duo.” Memory Stick Duo • Do not disassemble or modify the “Memory a Terminal Stick Duo.” Memory Stick Duo • Do not expose the “Memory Stick Duo” to water.

(MagicGate/high-speed a2) • Do not leave the “Memory Stick Duo” within data transfer)1) the reach of small children. They might Write-protect

MagicGate Memory Stick – switch4)

accidentally swallow it. • Do not use or keep the “Memory Stick Duo”

MagicGate Memory Stick

a Memo area under the following conditions:

Duo1) – High temperature locations such as the hot Memory Stick PRO – The position or the shape of the write-protect interior of a car parked in direct sunlight

1) 2) switch 4) may differ depending on the “Memory – Locations exposed to direct sunlight

Memory Stick PRO Duo a Stick Duo” you use. – Humid locations or locations with corrosive

1) “MagicGate Memory Stick Duo” and 4) The “Memory Stick Duo” supplied with this substances “Memory Stick PRO Duo” are equipped with camera does not have a write-protect switch. MagicGate functions. MagicGate is copyright When using the supplied “Memory Stick protection technology that uses encryption Duo,” be careful not to edit or delete data by technology. Data recording/playback that mistake. requires MagicGate functions cannot be • Do not remove the “Memory Stick Duo” while performed with this camera. reading or writing data. 2) Supports high-speed data transfer using a • Data may be corrupted in the following cases: parallel interface. – When the “Memory Stick Duo” is removed or the camera is turned off during read or 3) 640(Fine) size movies can be recorded and write operation played back only using “Memory Stick PRO – When the “Memory Stick Duo” is used in Duo.” locations subject to static electricity or electrical noise • “Memory Stick Duo” formatted with a • We recommend backing up important data. computer is not guaranteed to operate with this • Do not press down hard when you write down camera. on the memo area. • Data read/write speeds differ depending on the • Do not attach a label on the “Memory Stick combination of the “Memory Stick Duo” and Duo” itself nor on a Memory Stick Duo the equipment used. Adaptor. • When you carry or store the “Memory Stick Duo,” put it in the case supplied with it., Notes on using a Memory Stick Duo Effective use of the battery pack Adaptor (supplied) On “InfoLITHIUM” • Battery performance decreases in low- • When using a “Memory Stick Duo” with a battery pack temperature surroundings. So, the time that “Memory Stick” compliant device, be sure to the battery pack can be used is shorter in insert the “Memory Stick Duo” into a Memory Stick Duo Adaptor. cold places. We recommend the following If you insert a “Memory Stick Duo” into a to ensure longer battery pack use: “Memory Stick” compliant device without a What is the “InfoLITHIUM” – Put the battery pack in a pocket close to Memory Stick Duo Adaptor, you might not be your body to warm it up, and insert it in able to remove it from the device. battery pack? your camera immediately before you • When inserting a “Memory Stick Duo” into a The “InfoLITHIUM” battery pack is a start shooting. Memory Stick Duo Adaptor, make sure the lithium-ion battery pack that has functions “Memory Stick Duo” is inserted facing in the • Frequently operating the zoom or flash for communicating information related to correct direction, then insert it all the way in. wears out the battery charge faster. Incorrect insertion may result in a malfunction. operating conditions of your camera. • We recommend having spare battery • When using a “Memory Stick Duo” inserted The “InfoLITHIUM” battery pack packs handy for two or three times the into a Memory Stick Duo Adaptor with a calculates the power consumption expected shooting time, and making trial “Memory Stick” compliant device, make sure according to the operating conditions of that the “Memory Stick Duo” is inserted facing shots before taking the actual shots.your camera, and displays the remaining the correct direction. Note that improper use • Do not expose the battery pack to water. battery time in minutes. may damage the equipment. The battery pack is not water-resistant. • Do not insert a Memory Stick Duo Adaptor into a “Memory Stick” compliant device without a Charging the battery pack Remaining battery time indicator “Memory Stick Duo” attached. Doing so may We recommend charging the battery pack result in malfunction of the unit. The power may go off although the battery in an ambient temperature of between 10°C remaining indicator shows there is enough to 30°C (50° F to 86° F). You may not be Note on using “Memory Stick PRO power to operate. Use the battery pack up able to efficiently charge the battery pack Duo” (not supplied) and charge the battery pack fully again so outside of this temperature range. “Memory Stick PRO Duo” with a capacity up to that the indication on the battery remaining 512MB have been confirmed to operate properly indicator is correct. Note, however, that the with this camera. correct battery indication sometimes will not be restored if the camera is used in high temperatures for a long time or left in a fully charged state, or the battery pack is frequently used. Additional information,

How to store the battery pack [Input and Output connectors]

• If the battery pack is not to be used for a Specifications Multi connector long time, do the following procedure once per year to maintain proper function. x Camera [LCD screen] [System] LCD panel1 Fully charge the battery. 6.2 cm (2.5 type) TFT drive Image device 2 Discharge on your camera. 7.66 mm (1/2.4 type) color CCD Total number of dots 211 200 (960×220) dots 3 Remove the battery from your camera Primary color filter and store it in a dry, cool place. Total pixels number of camera Approx. 5 255 000 pixels [General] • To use the battery pack up on your Effective pixels number of camera Used battery pack camera, leave the POWER button to on in Approx. 5 090 000 pixels NP-FT1 slide show playback mode (page 62) until Lens Carl Zeiss Vario-Tessar Power requirements the power goes off. 3× zoom lens 3.6 V • Always carry and store the battery pack in f = 6.7 – 20.1 mm (38 – 114 mm when Power consumption (during shooting) converted to a 35 mm still camera) 1.6 W the battery case to prevent the battery F3.5 – 4.4 Operating temperature terminals from becoming dirty or short Exposure control 0°C to +40°C (+32°F to +104°F) circuited. Automatic exposure, Scene selection Storage temperature (8 modes) –20°C to +60°C (–4°F to +140°F) White balance

Battery life DimensionsAutomatic, Daylight, Cloudy, 102.5×60×17.3 mm

• The battery life is limited. Battery Fluorescent, Incandescent, Flash (4 1/8×2 3/8×11/16 inches) capacity decreases little by little as you File format (DCF compliant) (W/H/D, excluding maximum Still images: Exif Ver. 2.2 JPEG use it more and more, and as time passes. protrusions)compliant, DPOF compatible When the battery operating time is Mass Approx. 186 g (6.6 oz) (including Audio with still image: MPEG1 battery pack NP-FT1, “Memory Stick shortened considerably, a probable cause compliant (Monaural) Movies: MPEG1 compliant Duo” and wrist strap) is that the battery pack has reached the (Monaural) Built-in microphone end of its life. Buy a new battery pack. Recording media Electret condenser microphone • The battery life varies according to how it “Memory Stick Duo” Built-in speaker is stored and the operating conditions and Flash Recommended distance (ISO set to Piezo-electric speaker environment for each battery pack. Auto): Exif Print Compatible 0.3 m to 1.5 m (11 7/8 inches to PRINT Image Matching II Compatible 59 1/8 inches) (W) PictBridge Compatible 0.5 m to 1.5 m (19 3/4 inches to 59 1/8 inches) (T), xUC-TB USB cradle x NP-FT1 battery pack [Input and Output connectors] Used battery A/V OUT (MONO) jack (Monaural) Lithium-ion battery Minijack Maximum voltage Video: 1 Vp-p, 75 Ω, unbalanced, DC 4.2 V sync negative Nominal voltage Audio: 327 mV (at a 47 kΩ load) DC 3.6 V Output impedance 1 kΩ Capacity 2.4 Wh (680 mAh) USB jack B USB connection x Accessories High-Speed USB (USB 2.0 High-Speed compatible) • AC-LM5 AC Adaptor (1) DC IN jack • Power cord (mains lead) (1) Camera connector • UC-TB USB cradle (1) • USB cable (1) x AC-LM5 AC Adaptor • NP-FT1 battery pack (1) Power requirements • A/V connecting cable (1) 100 to 240 V AC, 50/60 Hz • Wrist strap (1) Current consumption • Carrying case (1) 0.2 A • “Memory Stick Duo” (32 MB) (1) Power consumption 10 W • Memory Stick Duo Adaptor (1) Rated output voltage • CD-ROM (USB driver SPVD-013) (1) 4.2 V DC, 1.5 A • Operating instructions (1) Operating temperature 0°C to +40°C (+32°F to +104°F) Design and specifications are subject to change without notice. Storage temperature –20°C to +60°C (–4°F to +140°F) Dimensions Approx. 47×30×80 mm (1 7/8×1 3/16×3 1/4 inches) (W/H/D, excluding projecting parts) Mass Approx. 170 g (6.0 oz) excluding power cord (mains lead) Additional information, J Spot metering cross hair (52)

The LCD screen K NR slow shutter indicator (34)/

Shutter speed indicator

When shooting still images L Multi Burst interval indicator

(56)/Image size indicator (20) 1 qs M Image quality indicator (44) qd N Recording folder indicator (45) 2 qf O Remaining number of recordable 3 qg images indicator (21) 60min VGA 101 qh 4 1/30” P Remaining “Memory Stick” 5 C:32:00 qj capacity indicator SOLARIZE qk6QSelf-diagnosis display (107)/ ql + Date/Time indicator (17) w; R ISO number indicator (110) S Bracket step value indicator (52) wa7TSelf-timer indicator (28) S AF 125 F3.5 ws U Histogram indicator (51) 8 wd V Menu/Guide menu (43) 9 wf W EV level indicator (50) q; wg X Aperture value indicator qa wh Y Vibration warning indicator (106) A Recording mode indicator (52, E Sharpness indicator (111)/ Z AF range finder frame (47) 55-58) Saturation indicator (111)/ B AE/AF lock indicator (22, 49) Contrast indicator (111)/ C Battery remaining indicator (13) AF illuminator (30, 114) D White balance indicator (54)/ F Metering mode indicator (52)/ Camera mode indicator (23)/ Picture effect indicator (58) Flash mode indicator (29)/ G Low battery warning indicator (106) Red-eye reduction indicator (29) H Macro indicator (27) I AF mode (48)/AF range finder Page numbers in parentheses indicate the frame indicator (47)/Focus location of additional important preset value (49) information.,

When shooting movies

1 q; qa 2 qs 60min STD640101 3 STBY00:00:00 [00:28:25] qd C:32:00 4 qf

SOLARIZE

qg 5 + 7 qh 8 qj A Recording mode indicator (77) L Recording folder indicator (45) B Battery remaining indicator (13) M Remaining “Memory Stick” C White balance indicator (54) capacity indicator D Low battery warning indicator N Self-diagnosis display (107) (106) O Self-timer indicator (28) E Metering mode indicator (52)/ P Menu/Guide menu (43) Picture effect indicator (58) Q EV level indicator (50) F Spot metering cross hair (52) G Macro indicator (27) H AF range finder frame indicator (47)/Focus preset value (49) I AF range finder frame (47) J Image size indicator (77) K Recording time [maximum Page numbers in parentheses indicate the recordable time] indicator (109) location of additional important information. Additional information,

When playing back still images

1 9 q; qa 3 qs 60min VGA 4 101 12/12 qd C:32:00 qf 5 x1.3 +2.0EV qg 6 500 F3.5 qh 7 qj BACK/NEXT VOLUME qk A Image size indicator (20) K Image number B Recording mode indicator (52, L Number of images recorded in 55-58) selected folder C Not disconnect USB cable M Remaining “Memory Stick” indicator (72, 74, 106) capacity indicator D Volume indicator (58)/ N Self-diagnosis display (107) Protect indicator (66)/ O Metering mode indicator (52)/ Print (DPOF) mark indicator (68) Flash indicator/White balance E Zoom scaling indicator (61)/Jog indicator (54) playback indicator (65) P Shutter speed indicator/Aperture F Change folder indicator (46) value indicator G EV level indicator (50)/ISO Q Histogram indicator (51) number indicator (110) R Recording date of the playback H Folder-file number (90) image (30)/Menu/Guide menu I PictBridge connecting indicator (43) Page numbers in parentheses indicate the (70) location of additional important J Playback folder indicator (60) information.,

When playing back moving images

182960min 160 101 3 101 8/804VOL. 00:00:12 5 qa qs qd DPOF qf A Image size indicator (77) B Recording mode indicator (77) C Playback indicator (78) D Volume indicator (78) E Change folder indicator (60) F Playback folder indicator (60) G Image number H Recording folder indicator (45) I Number of images recorded in selected folder J Remaining “Memory Stick” capacity indicator K Counter (78) L Playback image (78) M Playback bar (78) N Menu/Guide menu (43) Page numbers in parentheses indicate the • Pressing MENU switches the menu on/off. location of additional important information. Additional information,

Index

Control button ... 16 I

Index Copying images to your Image quality ... 44

computer ... 87, 88, 89, 93 Image size ... 20, 21, 108

A Cutting movies ... 81 Image Transfer ... 84

AC Adaptor ... 11, 15 ImageMixer ... 85 Access lamp ... 19 D Index screen ... 36 AE/AF lock ... 22, 24, 49 DC plug ... 11, 15 “InfoLITHIUM” battery pack ... 119 AF illuminator ... 30, 114 Deleting movies ... 79 Inserting “Memory Stick Duo” ... 19 AF lock ... 49 Deleting still images ... 39 Install ... 83, 84, 85 AF Mode ... 48 Digital zoom ... 26 ISO ... 110 AF range finder frame ... 47 Divide ... 81 Auto adjustment mode ... 22 DPOF ... 68 J Auto Focus ... 24, 47 JPG ... 91 Auto power-off function ... 16 E Auto Review ... 114 E-mail ... 57 L A/V connecting cable ... 37 Enlarging an image ... 61 LCD backlight on/off ... 25 EV adjustment ... 50 LCD screen brightness ... 115

B Exposure Bracket ... 52

Battery life ... 14, 119 M Battery remaining indicator ... 13, 119 F Macro ... 27 Beep/shutter sound ... 115 File names ... 90 Memory Stick Duo ... 19, 117 Burst ... 55 File storage destinations ... 90 Menu settings ... 43, 110 Flash ... 29 Metering mode ... 52

C Flash Level ... 55 Mode switch ... 9, 17, 23

CD-ROM ... 82 Focus preset ... 49 Moisture condensation ... 116 Center AF ... 47 Folder ... 45, 60 Monitoring AF ... 48 Charging battery pack ... 11, 119 Format ... 41 MPG ... 91 Charging time ... 13 Framing priority burst ... 55 Multi Burst ... 56, 64 Cleaning ... 116 Multi-pattern metering ... 52 Clock Set ... 17, 44, 115 H Multipoint AF ... 47 Close-ups (Macro) shooting ... 27 Histogram ... 51 Continuous AF ... 48 Contrast ... 111,

N S V

NR slow shutter ...34 Saturation ... 111 VGA ... 21, 108 NTSC system ...38, 115 Scene Selection ... 32 Viewing images on TV ... 37 Number of images that can be shot Screen display ... 25, 122 Viewing images on your computer ... 94 or viewed ...14, 21, 108 Self-diagnosis display ... 107 Viewing movies on the LCD screen ... 78 Self-timer ... 28 Viewing still images on the LCD screen ... 35

P Setting date and time ... 17, 115 Voice ... 58

PAL system ...38, 115 Setup ... 44, 114 PictBridge ...70 Sharpness ... 111 W Picture effect ...58 Shooting movies ... 77 Warnings and messages ... 105 Playback zoom ...61 Shooting still images ... 22 White Balance ... 54 Power on/off ...16 Single AF ... 48 Precautions ...116 Single screen ... 35 Precision digital zoom ...26 Slide show ... 62

Z

Zoom ... 25 Print (DPOF) mark ...68 Smart Zoom ... 26 Program auto shooting mode ...23 Speed priority burst ... 55 Protect ...66 Spot AF ... 47 PTP ...82, 93, 115 Spot metering ... 52 Superimposing date and time ... 30, 114

Q T

Quick Review ...24 Trimming ... 62 TV color system ... 38

R

Red Eye Reduction ...29

U

Remaining shooting/viewing time ...14, 108 RESET button ...95 USB connection ... 70, 86, 115 Resize ...67 USB cradle ... 10 Rotate ...63 USB driver ... 83, 93 USB jack ... 10, 86 USB mode ... 82, 93 Using your camera abroad ... 15 Index, Printed on 100% recycled paper using VOC (Volatile Organic Compound)-free vegetable oil based ink. Additional information on this product and answers to frequently asked questions can be found at our Customer Support Website. Sony Corporation Printed in Japan,

Reverse 987674742.pdf Revision History

Ver. Date History Contents S.M. Rev. issued 1.0 2004.04 Official Release — — 1.1 2004.09 Correction-1 Correction of part number Yes S.M. correction: 3P]
15

Similar documents

WARNING To prevent fire or shock hazard, do
DSC-T11 SERVICE MANUAL LEVEL 1 Differences Manual DSC-T11 AEP Model UK Model E Model Ver 1.0 2004. 04 Hong Kong Model Australian Model Revision History Korea Model Chinese Model Tourist Model Japanese Model • This Service Manual shows only the difference from DSC-T1. Refer to the Service Manual Leve
SPECIFICATIONS Camera [Input and Output connectors] BC-CSG/BC-CSGB/BC-CSGC
DSC-T20/T25 SERVICE MANUAL LEVEL 2 US Model Ver 1.0 2007.03 Canadian Model Revision History AEP Model UK Model How to use E Model Acrobat Reader Australian Model Hong Kong Model Chinese Model Internal memory Korea Model ON BOARD Argentine Model Brazillian Model Japanese Model Photo: Silver Tourist M
Model information table
DSC-T20/T25 SERVICE MANUAL LEVEL 3 US Model Ver 1.0 2007.03 Canadian Model Revision History AEP Model UK Model How to use E Model Acrobat Reader Australian Model Hong Kong Model Chinese Model Internal memory Korea Model ON BOARD Argentine Model Brazillian Model Japanese Model Photo: Silver Tourist M
DSC-T3 SERVICE MANUAL LEVEL 2 DSC-T3
DSC-T3 SERVICE MANUAL LEVEL 2 DSC-T3 Ver 1.0 2004. 09 US Model AEP Model Revision History UK Model E Model Hong Kong Model Australian Model How to use Chinese Model Acrobat Reader Japanese Model Korea Model Tourist Model Link SPECIFICATIONS BLOCK DIAGRAMS PRINTED WIRING BOARDS SERVICE NOTE FRAME SCH
DSC-T3 SERVICE MANUAL LEVEL 1 DSC-T3 Ver 1.0 2004. 09 US Model Revision History UK Model Link SPECIFICATIONS ACCESSORIES SELF DIAGNOSIS FUNCTION
DSC-T3 SERVICE MANUAL LEVEL 1 DSC-T3 Ver 1.0 2004. 09 US Model AEP Model Revision History UK Model E Model Hong Kong Model Australian Model Chinese Model Japanese Model Korea Model Tourist Model Link SPECIFICATIONS ACCESSORIES SELF DIAGNOSIS FUNCTION • INSTRUCTION MANUAL is shown at the end of this
DSC-T3 SERVICE MANUAL LEVEL 2 DSC-T3
DSC-T3 SERVICE MANUAL LEVEL 2 DSC-T3 Ver 1.2 2005. 09 US Model AEP Model Revision History UK Model E Model Hong Kong Model Australian Model How to use Chinese Model Acrobat Reader Japanese Model Korea Model Tourist Model Link SPECIFICATIONS BLOCK DIAGRAMS PRINTED WIRING BOARDS SERVICE NOTE FRAME SCH
DSC-T3 SERVICE MANUAL LEVEL 2 DSC-T3
DSC-T3 SERVICE MANUAL LEVEL 2 DSC-T3 Ver 1.1 2005. 04 US Model AEP Model Revision History UK Model E Model Hong Kong Model Australian Model How to use Chinese Model Acrobat Reader Japanese Model Korea Model Tourist Model Link SPECIFICATIONS BLOCK DIAGRAMS PRINTED WIRING BOARDS SERVICE NOTE FRAME SCH
DSC-T3 SERVICE MANUAL LEVEL 1 DSC-T3 Ver 1.2 2005. 09 US Model Revision History AEP Model Link
DSC-T3 SERVICE MANUAL LEVEL 1 DSC-T3 Ver 1.2 2005. 09 US Model Canadian Model Revision History AEP Model UK Model E Model Hong Kong Model Australian Model Chinese Model Japanese Model Korea Model Tourist Model Link SPECIFICATIONS ACCESSORIES SELF DIAGNOSIS FUNCTION • INSTRUCTION MANUAL is shown at t
DSC-T3 SERVICE MANUAL LEVEL 1 DSC-T3 Ver 1.1 2005. 04 US Model Revision History UK Model Link SPECIFICATIONS ACCESSORIES SELF DIAGNOSIS FUNCTION
DSC-T3 SERVICE MANUAL LEVEL 1 DSC-T3 Ver 1.1 2005. 04 US Model AEP Model Revision History UK Model E Model Hong Kong Model Australian Model Chinese Model Japanese Model Korea Model Tourist Model Link SPECIFICATIONS ACCESSORIES SELF DIAGNOSIS FUNCTION • INSTRUCTION MANUAL is shown at the end of this
SPECIFICATIONS Camera [LCD screen] BC-CS3 battery charger
DSC-T30 SERVICE MANUAL LEVEL 2 US Model Ver 1.0 2006.03 Canadian Model Revision History AEP Model UK Model How to use E Model Acrobat Reader Australian Model Hong Kong Model Chinese Model Internal memory ON BOARD Korea Model Brazilian Model Japanese Model Tourist Model Photo: Silver Link SPECIFICATI
DSC-T5 SERVICE MANUAL LEVEL 1 US Model UK Model E Model Australian Model Hong Kong Model Chinese Model Korea Model Brazilian Model Japanese Model Tourist Model
DSC-T5 SERVICE MANUAL LEVEL 1 US Model Ver 1.2 2005.10 Canadian Model Revision History AEP Model UK Model E Model Australian Model Hong Kong Model Chinese Model Korea Model Brazilian Model Japanese Model Photo: Silver Tourist Model Link SPECIFICATIONS ACCESSORIES INSTRUCTION MANUAL SERVICE NOTE The
DSC-T5 SERVICE MANUAL LEVEL 2
DSC-T5 SERVICE MANUAL LEVEL 2 US Model Ver 1.2 2005.10 Canadian Model Revision History AEP Model UK Model How to use E Model Acrobat Reader Australian Model Hong Kong Model Internal memory Chinese Model ON BOARD Korea Model Brazilian Model Photo: Silver Japanese Model Tourist Model Link SPECIFICATIO
SPECIFICATIONS Camera [Input and Output connectors] BC-CS3 battery charger
DSC-T50 SERVICE MANUAL LEVEL 2 US Model Ver 1.0 2006.09 Canadian Model Revision History AEP Model UK Model E Model How to use Australian Model Acrobat Reader Hong Kong Model Chinese Model Korea Model Internal memory Argentine Model ON BOARD Brazilian Model Japanese Model Tourist Model Photo: Silver
DSC-T7 SERVICE MANUAL LEVEL 2 DSC-T7
DSC-T7 SERVICE MANUAL LEVEL 2 DSC-T7 Ver 1.1 2005. 06 US Model Canadian Model Revision History AEP Model UK Model E Model Hong Kong Model How to use Australian Model Acrobat Reader Chinese Model Japanese Model Brazilian Model Argentina Model Korea Model Tourist Model Link SPECIFICATIONS BLOCK DIAGRA
DSC-T7 SERVICE MANUAL LEVEL 1 DSC-T7 Ver 1.2 2005. 09 US Model
DSC-T7 SERVICE MANUAL LEVEL 1 DSC-T7 Ver 1.2 2005. 09 US Model Canadian Model Revision History AEP Model UK Model E Model Hong Kong Model Australian Model Chinese Model Japanese Model Brazilian Model Argentina Model Korea Model Tourist Model Link SPECIFICATIONS ACCESSORIES SELF DIAGNOSIS FUNCTION •
DSC-T7 SERVICE MANUAL LEVEL 2 DSC-T7
DSC-T7 SERVICE MANUAL LEVEL 2 DSC-T7 Ver 1.2 2005. 09 US Model Canadian Model Revision History AEP Model UK Model E Model Hong Kong Model How to use Australian Model Acrobat Reader Chinese Model Japanese Model Brazilian Model Argentina Model Korea Model Tourist Model Link SPECIFICATIONS BLOCK DIAGRA
DSC-T9 SERVICE MANUAL LEVEL 2
DSC-T9 SERVICE MANUAL LEVEL 2 US Model Ver 1.1 2005.12 Canadian Model Revision History AEP Model UK Model How to use E Model Acrobat Reader Australian Model Hong Kong Model Internal memory Chinese Model ON BOARD Korea Model Brazilian Model Japanese Model Photo: Silver Tourist Model Link SPECIFICATIO
DSC-T9 US Model SERVICE MANUAL Canadian Model AEP Model E Model Australian Model Hong Kong Model Chinese Model Korea Model Brazilian Model SUPPLEMENT-1 Japanese Model
DSC-T9 LEVEL 3 US Model SERVICE MANUAL Canadian Model AEP Model Ver 1.1 2005.12 UK Model E Model Australian Model Hong Kong Model Chinese Model Korea Model Brazilian Model SUPPLEMENT-1 Japanese Model Tourist Model File this supplement with the service manual. (PV05-072) • Addition of Brazilian Model
DSC-T9 SERVICE MANUAL Canadian Model SUPPLEMENT-1 Japanese Model
DSC-T9 LEVEL 2 US Model SERVICE MANUAL Canadian Model AEP Model Ver 1.1 2005.12 UK Model E Model Australian Model Hong Kong Model Chinese Model Korea Model Brazilian Model SUPPLEMENT-1 Japanese Model Tourist Model File this supplement with the service manual. (PV05-072) • Addition of Brazilian Model
DSC-T9 SERVICE MANUAL LEVEL 2
DSC-T9 SERVICE MANUAL LEVEL 2 US Model Ver 1.2 2006.06 Canadian Model Revision History AEP Model UK Model How to use E Model Acrobat Reader Australian Model Hong Kong Model Internal memory Chinese Model ON BOARD Korea Model Brazilian Model Japanese Model Photo: Silver Tourist Model Link SPECIFICATIO
If you have any questions about this product, you may call: Note:
DSC-U20 SERVICE MANUAL LEVEL 1 US Model Ver 1.0 2002. 10 Canadian Model Revision History AEP Model UK Model E Model Hong Kong Model Australian Model Chinese Model Korea model Photo: SILVER model Tourist Model Japanese Model Link SPECIFICATIONS SELF DIAGNOSIS FUNCTION ORNAMENTAL PARTS • INSTRUCTION M
If you have any questions about this product, you may call: Note:
DSC-U20 SERVICE MANUAL LEVEL 1 US Model Ver 1.1 2003. 01 Canadian Model Revision History AEP Model UK Model E Model Hong Kong Model Australian Model Chinese Model Korea model Photo: SILVER model Tourist Model Japanese Model Link SPECIFICATIONS SELF DIAGNOSIS FUNCTION ORNAMENTAL PARTS • INSTRUCTION M
For the Customers in the U.S.A. Notice for the customers in the Notice
DSC-U30 SERVICE MANUAL LEVEL 1 US Model Ver 1.0 2003. 05 Canadian Model Revision History AEP Model UK Model E Model Hong Kong Model Australian Model Chinese Model Korea model Tourist Model Photo: SILVER model Japanese Model Link SPECIFICATIONS SELF DIAGNOSIS FUNCTION ORNAMENTAL PARTS • INSTRUCTION M
For the Customers in the U.S.A. Notice for the customers in the Notice
DSC-U40 SERVICE MANUAL LEVEL 1 US Model Ver 1.0 2003. 10 Canadian Model Revision History AEP Model UK Model E Model Hong Kong Model Australian Model Chinese Model Korea Model Tourist Model Photo: Silver Japanese Model Link SPECIFICATIONS SELF DIAGNOSIS FUNCTION ORNAMENTAL PARTS • INSTRUCTION MANUAL
For the Customers in the U.S.A. Notice for the customers in the Notice
DSC-U40 SERVICE MANUAL LEVEL 1 US Model Ver 1.1 2004.03 Canadian Model Revision History AEP Model UK Model E Model Hong Kong Model Australian Model Chinese Model Korea Model Tourist Model Photo: Silver Japanese Model Link SPECIFICATIONS SELF DIAGNOSIS FUNCTION ORNAMENTAL PARTS • INSTRUCTION MANUAL i
For the Customers in the U.S.A. Notice for the customers in the Notice
DSC-U50 SERVICE MANUAL LEVEL 1 US Model Ver 1.0 2003. 08 Canadian Model Revision History AEP Model UK Model E Model Hong Kong Model Australian Model Chinese Model Korea Model Tourist Model Photo: Orange Japanese Model Link SPECIFICATIONS SELF DIAGNOSIS FUNCTION ORNAMENTAL PARTS • INSTRUCTION MANUAL
DSC-V1 SERVICE MANUAL LEVEL 2 US Model Canadian Model UK Model E Model Hong Kong Model Australian Model Chinese Model Korea Model Tourist Model Japanese Model
DSC-V1 SERVICE MANUAL LEVEL 2 US Model Ver 1.0 2003. 05 Canadian Model Revision History AEP Model UK Model E Model Hong Kong Model Australian Model Chinese Model Korea Model Tourist Model Japanese Model Link SPECIFICATIONS BLOCK DIAGRAMS PRINTED WIRING BOARDS SERVICE NOTE FRAME SCHEMATIC DIAGRAMS RE
DSC-V1 SERVICE MANUAL LEVEL 1 US Model Ver 1.0 2003. 05 Canadian Model Revision History AEP Model UK Model E Model Hong Kong Model Australian Model Chinese Model
DSC-V1 SERVICE MANUAL LEVEL 1 US Model Ver 1.0 2003. 05 Canadian Model Revision History AEP Model UK Model E Model Hong Kong Model Australian Model Chinese Model Korea Model Tourist Model Japanese Model Link SPECIFICATIONS SELF DIAGNOSIS FUNCTION ORNAMENTAL PARTS • INSTRUCTION MANUAL is shown at the
DSC-V1 SERVICE MANUAL LEVEL 2 US Model Canadian Model UK Model E Model Hong Kong Model Australian Model Chinese Model Korea Model Tourist Model Japanese Model
DSC-V1 SERVICE MANUAL LEVEL 2 US Model Ver 1.0 2003. 05 Canadian Model Revision History AEP Model UK Model E Model Hong Kong Model Australian Model Chinese Model Korea Model Tourist Model Japanese Model Link SPECIFICATIONS BLOCK DIAGRAMS PRINTED WIRING BOARDS SERVICE NOTE FRAME SCHEMATIC DIAGRAMS RE
DSC-V1 SERVICE MANUAL LEVEL 2 US Model Canadian Model UK Model E Model Hong Kong Model Australian Model Chinese Model Korea Model Tourist Model Japanese Model
DSC-V1 SERVICE MANUAL LEVEL 2 US Model Ver 1.1 2004. 09 Canadian Model Revision History AEP Model UK Model E Model Hong Kong Model Australian Model Chinese Model Korea Model Tourist Model Japanese Model Link SPECIFICATIONS BLOCK DIAGRAMS PRINTED WIRING BOARDS SERVICE NOTE FRAME SCHEMATIC DIAGRAMS RE