Download: For the Customers in the U.S.A. Notice for the customers in the Notice

DSC-U40 SERVICE MANUAL LEVEL 1 US Model Ver 1.0 2003. 10 Canadian Model Revision History AEP Model UK Model E Model Hong Kong Model Australian Model Chinese Model Korea Model Tourist Model Photo: Silver Japanese Model Link SPECIFICATIONS SELF DIAGNOSIS FUNCTION ORNAMENTAL PARTS • INSTRUCTION MANUAL is shown at the end of this document. DIGITAL STILL CAMERA DSC-U40 SPECIFICATIONS xCamera [LCD screen] Output rating [System] LCD panel used DC OUT AA: 1.4 V, 2.5 cm (1.0 type) TFT drive 400 mA × 2 Image device Total number of dots AAA: 1.4 V, 6.72 mm (1/2.7 type) color CCD Primary color filter 64 4...
Author: 阿由葉 Shared: 8/19/19
Downloads: 1472 Views: 4284

Content

DSC-U40 SERVICE MANUAL LEVEL 1

US Model Ver 1.0 2003. 10 Canadian Model Revision History AEP Model UK Model E Model Hong Kong Model Australian Model Chinese Model Korea Model Tourist Model Photo: Silver Japanese Model Link SPECIFICATIONS SELF DIAGNOSIS FUNCTION ORNAMENTAL PARTS • INSTRUCTION MANUAL is shown at the end of this document.

DIGITAL STILL CAMERA

,

DSC-U40 SPECIFICATIONS

xCamera [LCD screen] Output rating [System] LCD panel used DC OUT AA: 1.4 V, 2.5 cm (1.0 type) TFT drive 400 mA × 2 Image device Total number of dots AAA: 1.4 V, 6.72 mm (1/2.7 type) color CCD Primary color filter 64 460 (293×220) dots 160 mA × 2 Operating temperature range Total pixels number of camera 0°C to +40°C (+32°F to +104°F) Approx. 2 112 000 pixels [Power, general] Storage temperature range Effective pixels number of camera Power AAA Nickel-Metal Hydride –20°C to +60°C (–4°F to +140°F) Approx. 2 020 000 pixels batteries (2) 2.4 V Dimensions Lens Single focal lens5V(from USB cable) Approx. 71 × 30 × 91 mm f = 5.0 mm (7/32 inches) Power consumption (when shooting) (2 7/8 × 1 3/16 × 3 5/8 inches) (35 mm camera conversion: 33 mm 1.21 W (W/H/D) (1 5/16 inches)) Operating temperature range Mass Approx. 90 g (3 oz)F2.8 0°C to +40°C (+32°F to +104°F) Exposure control Automatic, Scene Selection Storage temperature range Accessories (5 modes) –20°C to +60°C (–4°F to +140°F) Dimensions • HR11/45: HR03 (Size AAA) Ni-MH batteries (2) White Balance • Battery case (1) Automatic, Daylight, Cloudy, 82.8 × 39.0 × 26.0 mm Fluorescent, Incandescent (3 3/8 × 1 9/16 × 1 1/16 inches) • BC-CS2A/CS2B Ni-MH battery charger (1) (W/H/D, protruding sections not Data formats • Power cord (mains lead) (1)included) Still images: DCF compliant • USB cable (1) (Exif Ver. 2.2 JPEG compliant), Mass Approx. 114 g (4.0 oz) (Others) DPOF compatible Approx. 132 g (4.7 oz) (Zirconium) • Neck strap (1) Movies: MPEG1 compliant (without (two batteries, “Memory Stick Duo,” • “Memory Stick Duo” (8MB) (1) audio) and neck strap included) • Memory Stick Duo Adaptor (1) Recording media Exif Print Compatible • CD-ROM (USB driver SPVD-013) (1) “Memory Stick Duo” PRINT Image Matching II Compatible • Operating instructions (1) Flash Recommended distance: 0.5 m to PictBridge Compatible 1.8 m (1 foot 7 3/4 inches to 5 feet Design and specifications are subject to change 10 3/4 inches) xBC-CS2A/CS2B Ni-MH without notice. battery charger [Output connector] Input rating USB jack mini-B 100 – 240 V AC, 50/60 Hz, 3 W SAFETY-RELATED COMPONENT WARNING!! ATTENTION AU COMPOSANT AYANT RAPPORT À LA SÉCURITÉ! COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE WITH LES COMPOSANTS IDENTIFÉS PAR UNE MARQUE 0 SUR LES MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU PUBLISHED BY SONY. DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.

SAFETY CHECK-OUT After correcting the original service problem, perform the following

safety checks before releasing the set to the customer. 1. Check the area of your repair for unsoldered or poorly-soldered 5. Check the B+ voltage to see it is at the values specified. connections. Check the entire board surface for solder splashes 6. Flexible Circuit Board Repairing and bridges. • Keep the temperature of the soldering iron around 270˚C 2. Check the interboard wiring to ensure that no wires are during repairing. "pinched" or contact high-wattage resistors. • Do not touch the soldering iron on the same conductor of the 3. Look for unauthorized replacement parts, particularly circuit board (within 3 times). transistors, that were installed during a previous repair. Point • Be careful not to apply force on the conductor when soldering them out to the customer and recommend their replacement. or unsoldering. 4. Look for parts which, through functioning, show obvious signs of deterioration. Point them out to the customer and recommend their replacement. — 2 —,

DSC-U40 SELF-DIAGNOSIS FUNCTION

[Description on Self-diagnosis Display] C:32:ss Self-diagnosis display • C: ss: ss You can reverse the camera malfunction yourself. (However, contact your Sony dealer or local authorized Sony service facility when you cannot recover from the camera malfunction.) • E: ss: ss Contact your Sony dealer or local authorized Sony service facility. Display Code Countermeasure Cause Caution Display During Error C:32:ss Turn the power off and on again. Trouble with hardware. SYSTEM ERROR Format the “Memory Stick Duo”. Unformatted memory stick duo is inserted. FORMAT ERROR C:13:ss Insert a new “Memory Stick Duo”. Memory stick duo is broken. MEMORY STICK ERROR E:61:ss Checking of lens drive circuit. When failed in the focus initialization. — Checking of flash unit or replacement Abnormality when flash is being E:91:ss of flash unit. charged. — 3 —,

DSC-U40

1. MAIN PARTS Note: • Items marked “*” are not stocked since they are seldom required for routine service. The components identified by Some delay should be anticipated when ordering these items. mark 0 or dotted line with mark • The parts numbers of such as a cabinet are also appeared in this section. 0 are critical for safety. Replace only with part number Refer to the parts number mentioned below the name of parts to order. specified. • Abbreviation Les composants identifiés par une AUS: Australian model HK : Hong Kong model J : Japanese model marque 0 sont critiquens pour la CH : Chinese model JE : Tourist model KR : Korean model sécurité. CND: Canadian model Ne les remplacer que par une pièceportant le numéro spécifié. • Color variation color US CND AEP UK E AUS CH HK KR JE J SilverzzzzzzzzzzzBlackzzzzzzzzzzRedzzzzzzzzzzzDeep bluezzzzzzzzzzzZirconium z 1. ORNAMENTAL PARTS USB cover (70) 3-086-590-01 (Silver) 3-086-590-11 (Black) 3-086-590-21 (Deep blue) 3-086-590-31 (Red) 3-086-590-41 (Zirconium) (When change it, need dismantle the set.) — 4 —,

DSC-U40 Checking supplied accessories.

Power cord (1) Battery charger (BC-CS2) (1) Nickel-Metal hybrid battery Neck strap (1) 0 1-696-819-11 (AUS) 0 1-477-814-12 (NH-AAA-DA) (2) 3-084-497-01 0 1-769-608-11 (AEP, E) (US, CND, JE, J) 0 1-776-985-11 (KR) 0 1-477-814-22 0 1-782-476-13 (CH) (AEP, UK, E, HK, AUS) 0 1-783-374-11 (UK, HK) 0 1-477-814-33 (KR, CH) 0 1-790-107-22 (US, CND) 0 1-790-732-12 (JE) 0 1-827-160-11 (J) USB cable (1) AAA battery case (1) "Memory Stick Duo" (8MB) (1) Memory Stick Duo Adaptor (1) 1-827-038-11 3-076-474-01

Other accessories

3-084-892-01 MANUAL, INSTRUCTION (JAPANESE) (J) 3-084-892-11 MANUAL, INSTRUCTION (ENGLISH) (US, CND, AEP, UK, E, AUS, CH, HK, JE) 3-084-892-21 MANUAL, INSTRUCTION (FRENCH, GERMAN) (CND, AEP) CD-ROM Conversion Adaptor (1) 3-084-892-31 MANUAL, INSTRUCTION (SPANISH, PORTUGUESE) (SPVD-013 USB driver) (1) 0 1-569-008-12 (E) (AEP, E, JE) 3-087-330-01 (AEP, UK, E, HK, AUS, CH, JE, KR) 3-084-892-41 MANUAL, INSTRUCTION (ITALIAN, DUTCH) (AEP) 3-087-331-01 (US, CND, J) 3-084-892-51 MANUAL, INSTRUCTION (TRADITIONAL CHINESE, SIMPLIFIED CHINESE) (E, HK, CH, JE) 3-084-892-61 MANUAL, INSTRUCTION (SWEDISH, RUSSIAN) (AEP) 3-084-892-71 MANUAL, INSTRUCTION (ARABIC) (E) 3-084-892-81 MANUAL, INSTRUCTION (KOREAN) (KR) Conversion Adaptor (1) 0 1-569-007-12 (JE) The components identified by Les composants identifiés par une mark 0 or dotted line with marque 0 sont critiques pour la mark 0 are critical for safety. sécurité. Replace only with part num- Ne les remplacer que par une pièce ber specified. portant le numéro spécifié.

Sony EMCS Co. 2003J0500-19-876-281-41 ©2003.10

— 5 — Published by DI CS Strategy Div, 3-084-892-11(1)

Digital Still Camera Operating Instructions

Before operating the unit, please read this manual thoroughly, and retain it for future reference.

Owner’s Record

The model and serial numbers are located on the bottom. Record the serial number in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. Model No. DSC-U40 Serial No.

DSC-U40

© 2003 Sony Corporation Getting started _ Shooting still images _ Enjoying still images _ Enjoying movies _ Deleting images _ Enjoying images on your computer _ Troubleshooting _ Additional information _ Index _, If you have any questions about this product, Note:

WARNING you may call: This equipment has been tested and found to

To prevent fire or shock hazard, do Sony Customer Information Services Center comply with the limits for a Class B digital 1-800-222-SONY (7669) not expose the unit to rain or device, pursuant to Part 15 of the FCC Rules. moisture. These limits are designed to provide The number below is for the FCC related reasonable protection against harmful matters only. interference in a residential installation. This

For the Customers in the U.S.A. equipment generates, uses, and can radiate Regulatory Information radio frequency energy and, if not installed

and used in accordance with the instructions,

Declaration of Conformity may cause harmful interference to radio

communications. However, there is no Trade Name: SONY guarantee that interference will not occur in a Model No.: DSC-U40 particular installation. If this equipment does Responsible Party:Sony Electronics Inc. cause harmful interference to radio or Address: 680 Kinderkamack television reception, which can be determined Road, Oradell, NJ 07649 by turning the equipment off and on, the user U.S.A. is encouraged to try to correct the interference Telephone No.: 201-930-6972 by one or more of the following measures: This device complies with Part 15 of the – Reorient or relocate the receiving FCC Rules. Operation is subject to the antenna. This symbol is intended to following two conditions: (1) This device – Increase the separation between the alert the user to the presence may not cause harmful interference, and equipment and receiver. of uninsulated “dangerous (2) this device must accept any interference – Connect the equipment into an outlet on a voltage” within the product’s received, including interference that may circuit different from that to which the enclosure that may be of cause undesired operation. receiver is connected. sufficient magnitude to – Consult the dealer or an experienced constitute a risk of electric

CAUTION radio/TV technician for help. shock to persons.

You are cautioned that any changes or The supplied interface cable must be used This symbol is intended to modifications not expressly approved in this alert the user to the presence with the equipment in order to comply with manual could void your authority to operate of important operating and the limits for a digital device pursuant to this equipment. maintenance (servicing) Subpart B of Part 15 of FCC Rules. instructions in the literature accompanying the appliance.,

For the Customers in the U.S.A. Notice for the customers in the Notice

and Canada United Kingdom If static electricity or electromagnetism causes data transfer to discontinue midway (fail), A moulded plug complying with BS1363 is fitted restart the application or disconnect and connect the USB cable again.

RECYCLING NICKEL METAL to this equipment for your safety and HYDRIDE BATTERIES convenience. Should the fuse in the plug supplied need to be Certain countries may regulate disposal of the

Nickel Metal Hydride replaced, a fuse of the same rating as the supplied battery used to power this product. Please batteries are recyclable. one and approved by ASTA or BSI to BS1362 consult with your local authority. You can help preserve our (i.e., marked with or mark) must be used. environment by returning your If the plug supplied with this equipment has a used rechargeable batteries to detachable fuse cover, be sure to attach the fuse “Memory Stick” the collection and recycling location cover after you change the fuse. Never use the nearest you. plug without the fuse cover. If you should lose the fuse cover, please contact your nearest Sony For more information regarding recycling service station. of rechargeable batteries, call toll free N50 1-800-822-8837, or visit http://www.rbrc.org/ Attention for the Customers in

Europe

CAUTION: For the Customers in the U.S.A. Do not handle damaged or leaking Nickel This product has been tested and found THIS DEVICE COMPLIES WITH PART 15 Metal Hydride batteries. compliant with the limits sets out in the EMC OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO Directive for using connection cables shorter CAUTION CONDITIONS:than 3 meters (9.8 feet). (1) THIS DEVICE MAY NOT CAUSE TO PREVENT ELECTRIC SHOCK, MATCH HARMFUL INTERFERENCE, AND WIDE BLADE OF PLUG TO WIDE SLOT, Attention (2) THIS DEVICE MUST ACCEPT ANY FULLY INSERT. The electromagnetic fields at the specific INTERFERENCE RECEIVED, frequencies may influence the picture of this INCLUDING INTERFERENCE THAT MAY camera. CAUSE UNDESIRED OPERATION.

For the Customers in Canada

THIS CLASS B DIGITAL APPARATUS COMPLIES WITH CANADIAN ICES-003.,

Before using your camera

Trial recording Notes on “Memory Stick Duo” LCD screen, LCD finder (only models Before you record one-time events, you may want • There are two types of “Memory Stick”: a with an LCD finder) and lens to make a trial recording to make sure that the normal size “Memory Stick” and a smaller • The LCD screen and the LCD finder are camera is working correctly. version called a “Memory Stick Duo.” You can manufactured using extremely high-precision use only a “Memory Stick Duo” in this camera. technology so over 99.99% of the pixels are No compensation for contents of the • This camera turns off whenever you open the operational for effective use. However, there recording battery/“Memory Stick Duo” cover. Do not may be some tiny black points and/or bright open the battery/“Memory Stick Duo” cover Contents of the recording cannot be compensated points (white, red, blue or green in color) that while the access lamp is lit. for if recording or playback is not possible due to constantly appear on the LCD screen and the a malfunction of your camera or recording media, LCD finder. These points are normal in the etc. Precaution on copyright manufacturing process and do not affect the Television programs, films, video tapes, and other recording in any way. • Be careful when placing the camera near a Back up recommendation materials may be copyrighted. Unauthorized recording of such materials may be contrary to window or outdoors. Exposing the LCD screen, To avoid the potential risk of data loss, always the provision of the copyright laws. the LCD finder or the lens to direct sunlight for copy (back up) data to a disk. long periods may cause malfunctions. Do not shake or strike the camera • Do not press the LCD screen hardly. The screen Notes on image data compatibility may be uneven and that may cause a In addition to malfunctions and inability to record • This camera conforms with the Design rule for malfunction. images, this may render the “Memory Stick Duo” Camera File system universal standard • Images may be trailed on the LCD screen in a unusable or image data breakdown, damage or established by the JEITA (Japan Electronics cold location. This is not a malfunction. loss may occur. and Information Technology Industries Association). • Playback of images recorded with your camera on other equipment and playback of images recorded or edited with other equipment on your camera are not guaranteed., Clean the flash surface before use Trademarks The heat of flash emission may cause dirt on the • “Memory Stick Duo” and flash surface to become discolored or to stick to are trademarks of Sony Corporation. the flash surface, resulting in insufficient light • “Memory Stick PRO Duo” and emission. are trademarks of Sony Corporation. Do not get the camera wet • “MagicGate Memory Stick Duo” is a When taking pictures outdoors in the rain or trademark of Sony Corporation. under similar conditions, be careful not to get the • “Memory Stick,” , and “MagicGate camera wet. If moisture condensation occurs, see Memory Stick” are trademarks of Sony page 81 and follow the instructions on how to Corporation. remove it before using the camera. • “Memory Stick PRO” and are trademarks of Sony Corporation. • “MagicGate” and are Do not expose the camera to sand or trademarks of Sony Corporation. dust • Microsoft and Windows are registered Using the camera in sandy or dusty locations may trademarks of the U.S. Microsoft Corporation cause malfunction. in the United States and other countries. • Macintosh and Mac OS are trademarks or Note on the camera locations registered trademarks of Apple Computer, Inc. Do not use the camera near a location that • Pentium is a trademark or a registered generates strong radio wave or emits radiation. trademark of Intel Corporation. The camera may not be able to record or play • In addition, system and product names used in back properly. this manual are, in general, trademarks or registered trademarks of their respective ™ The pictures used in this manual developers or manufacturers. However, the or ® marks are not used in all cases in this The photographs used as examples of pictures in manual. this manual are reproduced images, and are not actual images shot using this camera.

How to hold the

camera When shooting an image with the camera, be careful not to obstruct the flash or the lens with your fingers.,

Table of contents

Before using your camera ... 4 Shooting images continuously Deleting images How to hold the camera ... 5 — Burst ... 31 Identifying the parts ... 8 Adjusting color tones Deleting images...50 — White Balance... 33 Formatting a “Memory Stick Duo”...51

Getting started Enjoying still images Enjoying images on your Preparing batteries ... 10 computer

Charging the batteries ... 10 Viewing still images on the LCD Inserting the batteries... 12 screen ... 35 Copying images to your computer Using your camera abroad ... 14 Viewing single images ... 35 — For Windows users ...53 Turning on/off your camera ... 14 Viewing an index screen Installing the USB driver ...54 How to use the buttons... 15 (four-image) ... 36 Installing “Image Transfer” ...55 Setting the date and time... 15 Selecting the folder and playing back Installing “ImageMixer” ...56 images — Folder... 37 Connecting the camera to

Shooting still images Enlarging an image your computer...57

Inserting and removing a — Enlarged playback... 39 Copying images using “Memory Stick Duo”... 17 Choosing images to print “Image Transfer” ...58 Setting the still image size ... 18 — Print (DPOF) mark... 40 Changing “Image Transfer” settings...59 Image size ... 19 Connecting your camera to a PictBridge Copying images without using Basic still image shooting compliant printer ... 42 “Image Transfer” ...59 — Using auto adjustment mode ... 20 Printing images... 44 Viewing images on your computer...61 Using the self-timer ... 22 Image file storage destinations and Selecting a flash mode... 23 Enjoying movies file names...62 Creating or selecting a folder... 24 Shooting movies ... 46 Viewing images from your computer Creating a new folder ... 25 Viewing movies on the LCD screen... 49 with this camera...63 Selecting the recording folder... 26 Copying images to your computer Shooting according to scene conditions — For Macintosh users ...64 — Scene Selection... 28 Creating a Video CD using Setting the distance to the subject “ImageMixer”...66 — Focus preset... 30,

Troubleshooting

Troubleshooting ...67 Warnings and messages ...75 Self-diagnosis display — If a code starting with an alphabet letter appears ...77

Additional information

Menu items...78 Precautions ...81 On “Memory Stick” ...83 On Nickel-Metal Hydride batteries ...84 On the battery charger...85 Specifications ...86 LCD screen displays ...87

Index

Index...89,

Identifying the parts

See the pages in parentheses for details of operation. 1547AShutter button (20) B POWER button (14) C POWER lamp (14) D Lens cover (14) E Mode switch : To view images (35) : To shoot still images (20) To shoot images continuously (31) : To shoot movies (46) F Flash (23) G Self-timer lamp (23) H Lens, Attaching the neck strap38q; qa 5 qs A LCD screen B (Flash charge) lamp (orange) (24) C MENU button (15) D Control buttons Menu on: v/V (15) Menu off: /SCENE (23, 28) E EXEC/ (Enlarged playback) button (15, 39) F Hook for neck strap G Battery/“Memory Stick Duo” cover H OPEN button (12) I Access lamp (17) J USB jack cover K (USB) jack (57) L RESET button (bottom surface) (67),

Getting started Preparing batteries Acceptable batteries – The battery remaining indicator will

not display the correct information. – HR11/45: HR03 (size AAA) Nickel- The camera may turn off even when Metal Hydride batteries (2) the indicator shows that there is NH-AAA-DA (2) (supplied) power remaining, but this is not a NH-AAA-2DA twin-pack (not supplied) malfunction. – R03 (size AAA) alkaline batteries (2)

Batteries that cannot be used

Manganese batteries, lithium batteries, Ni-Cd batteries When the above batteries are used, operation is not guaranteed due to possible voltage drops or other characteristics of the batteries. In addition, the battery remaining indicator is not displayed correctly. • When alkaline batteries are used, take note of the following information. – The battery life is shorter than that of the supplied Nickel-Metal Hydride batteries. – There is a big difference in the performance of batteries of different types and of batteries made by different manufacturers. The battery life may be quite a bit shorter depending on the conditions under which the batteries are used. This is especially true in low temperatures, where some batteries are noticeably weaker. You may not be able to shoot in temperatures below 5°C (41°F).

Charging the

batteries , Insert Nickel-Metal Hydride batteries into the battery charger (supplied) with the correct polarity +/–. For details on the supplied battery charger, see page 85. • The supplied battery charger is only for Nickel-Metal Hydride batteries. You cannot charge any other type of battery. • Be sure to charge the Nickel-Metal Hydride batteries supplied with your camera before using them for the first time. • Connect the battery charger to an easily accessible wall outlet (wall socket) close by.,

Charging time • Always use the supplied case when transporting

Getting started CHARGE lamp the Nickel-Metal Hydride batteries. If the To the wall outlet Nickel-Metal Hydride Charging time positive and negative terminals come into (wall socket) battery contact with metallic material and are shorted, NH-AAA-DA × 2 (supplied) Approx. 6 hours the batteries could overheat or catch fire. • At the time of purchase, or when the This represents the time required to charge Nickel-Metal Hydride batteries have not been fully depleted Nickel-Metal Hydride used for a long time, they may not fully charge. batteries using the supplied battery charger This is typical of this type of battery, and is not in an environment where the ambient a malfunction. If this happens, repeatedly using Power cord 2 temperature is 25°C (77°F). up the batteries fully, and then charging them, (mains lead) should correct the problem. • Even when Nickel-Metal Hydride batteries are , Connect the battery charger to • It takes about six hours to completely charge not being used they lose their charge naturally the batteries. The CHARGE lamp may remain a wall outlet (wall socket) using over time. It is recommended that you recharge lit longer than six hours, but this is not a the batteries just before using them. the power cord (mains lead). malfunction. • If you recharge Nickel-Metal Hydride batteries • If you use the BC-CSQ2 battery charger before fully using up the existing charge, the The CHARGE lamp lights up when supplied with the STAMINA “Super Quick low battery warning may be displayed sooner charging begins, and goes off when charge” kit (not supplied), the batteries will than expected. This is called the “memory charging is completed. charge faster. effect.”* If this problem occurs, charging the Charging time for Size AAA Nickel-Metal batteries only after using up the existing charge Hydride batteries • Even if the CHARGE lamp is not lit, the battery will correct it.2 batteries: Approx. 1 hour 25 minutes charger is not disconnected from the AC power 4 batteries: Approx. 2 hours 50 minutes * The “memory effect” – the situation in which source (mains) as long as it is connected to the the capacity of the battery is temporarily wall outlet (wall socket). If some trouble occurs Notes on the Nickel-Metal lowered. while using the battery charger, immediately Hydride batteries • Do not peel off the external seals or damage the shut off the power by disconnecting the plug batteries. Never use batteries from which the from the wall outlet (wall socket). • If the poles of the Nickel-Metal Hydride seals have been partially or completely • When charging is finished, disconnect the batteries are dirty, the batteries may not charge removed, or batteries that have been split in any power cord (mains lead) from the wall outlet properly. Occasionally clean the poles of the way. These may cause leakage, explosion, or (wall socket), and remove the Nickel-Metal batteries and the terminals of the charger by heat-up of the battery, and personal scald or Hydride batteries from the battery charger. wiping them with a dry cloth. injury may be caused. These may cause a malfunction of the battery charger.,

Inserting the batteries

123, Open the battery/“Memory , Insert the batteries. , Close the battery/“Memory

Stick Duo” cover. Stick Duo” cover.

Match the +/– poles of the batteries to the Hold the camera with the battery/“Memory +/– marks inside the battery case. Close the battery/“Memory Stick Duo” Stick Duo” cover up, then slide the cover in cover while holding the batteries in. Make the direction of the arrow 1 while pressing • From time to time, use a dry cloth to wipe any sure the cover is closed securely. OPEN. The battery/“Memory Stick Duo” dirt off of the battery terminals and the contacts cover opens in the direction of the arrow 2. on the battery/“Memory Stick Duo” cover. Skin To remove the batteries oil and other dirt on the battery terminals and Hold the camera with the battery/“Memory contacts can significantly shorten the operating time provided by the batteries. Stick Duo” cover facing upward, open the cover, and remove the batteries. • Be careful not to drop the batteries when opening or closing the battery/“Memory Stick Duo” cover.,

Battery remaining indicator Battery life and number of Alkaline batteries

Getting started (When using Nickel-Metal images that can be recorded/ R03 (size AAA) alkaline

Hydride batteries) viewed Image batteries (2) (not supplied)

size As the battery power decreases with use, the LCD No. of Battery The tables show the approximate battery LIGHT images life (min.) battery remaining indicator displays the life and the number of images that can be ON Approx. 50 Approx. 25 amount of power remaining using the recorded/viewed with fully charged 2M OFF Approx. 60 Approx. 30 following symbols. batteries at a temperature of 25°C (77°F) in ON Approx. 50 Approx. 25 Battery auto adjustment mode. The numbers of VGA remaining Battery remaining OFF Approx. 60 Approx. 30 images that can be recorded/viewed take indicator guidelines • When using Sony alkaline batteriesinto account changing the supplied Sufficient power remaining “Memory Stick Duo” as necessary. Note 1) Shooting in the following situations: Battery half full that the actual numbers may be less than – Shooting one time every 30 seconds indicated depending on the conditions of – The flash strobes once every two times Battery low, recording/ playback will stop soon. use. – The power turns on and off once every ten times. Change the batteries for fully charged ones, or charge these Shooting still images batteries. 2) (The warning indicator flashes.) Under the average conditions1)

Viewing still images

NH-AAA-DA (2) (supplied) Image Nickel-Metal Hydride batteries size No. of Battery life • If the LCD screen display is off, set images (min.) [DISPLAY] in [ ] to [ON] to check the NH-AAA-DA (2) (supplied)Image 2M Approx. 3800 Approx. 190 amount of power remaining. size LCD No. of Battery LIGHT images life (min.) VGA Approx. 3800 Approx. 190• Based on the conditions under which the camera is being used and the state of the ON Approx. 160 Approx. 80 2) Viewing single images in order at about 3- charge, or on the environment, this information 2M OFF Approx. 180 Approx. 90 second intervals with [LCD LIGHT] set to may not be correctly indicated. ON Approx. 160 Approx. 80 [ON] • The battery remaining indicator is not VGA OFF Approx. 180 Approx. 90 displayed in USB connecting.,

Shooting movies3)

NH-AAA-DA (2) (supplied) LCD LIGHT Battery life Continuous (min.) recording ON Approx. 90 OFF Approx. 110 3) Shooting continuously at 160×112 image size • The remaining indicator will decrease under the following conditions: – The surrounding temperature is low – The flash is used – The camera has been turned on and off many times – [LCD LIGHT] is set to [ON] – The battery capacity decreases as you use it more and more and as time passes (page 84).

Using your camera

abroad

Power sources

You can use your camera in any country or region with the supplied battery charger within 100 V to 240 V AC, 50/60 Hz. Use a commercially available AC plug adaptor [a], if necessary, depending on the design of the wall outlet (wall socket) [b]. BC-CS2A/CS2B • Do not use an electronic transformer (travel converter), as this may cause a malfunction.

Turning on/off your

camera

POWER

POWER lamp , Slide the lens cover in the direction of the arrow or press

POWER.

The POWER lamp (green) lights up and the power is on. When you turn on your camera for the first time, the DATE NOTATION screen appears on the LCD screen (page 15). To turn off the power Slide the lens cover in the opposite direction of the arrow or press POWER again. The POWER lamp goes out, and the camera turns off. • Slide the lens cover closed until it clicks into place. • If you open the lens cover too quickly, the camera might not turn on. If this happens, close the cover and then open it again more slowly.,

Auto power-off function

Getting started If you do not operate the camera for about three minutes, the camera turns off automatically to prevent wearing down the batteries. However, the auto power-off function will not operate when the camera is connected to a computer with the USB cable.

How to use the

buttons Control buttons EXEC/

MENU

To change the current settings of the camera, bring up the menu, and use the control buttons to make the changes. For each item, press MENU to display the menu and press the control buttons v/V to select the desired value, then press EXEC to make the setting. Press MENU, then the menu disappears from the LCD screen.

Setting the date

and time

POWER

DATE NOTATION 20031112:00:00 AM Y/M/D M/D/Y D/M/Y , Slide the lens cover in the direction of the arrow or press

POWER to turn on the power.

The POWER lamp (green) lights up and the DATE NOTATION screen appears on the LCD screen. • To change the date and time, press MENU and select [DATE&TIME SET] in [CLOCK SET] under [ ] (page 80), then perform step 3. When the setting is complete, press MENU so that the CLOCK SET screen disappears from the LCD screen. • This operation is available no matter what position the mode switch is in., DATE&TIME SET DATE&TIME SET DATE&TIME SET Y/M/D Y/M/D Y/M/D 20031112:00AM 20031112:00AM 20037410:30AM

OK CANCEL

EXEC/ 2 3 EXEC/ 4 EXEC/ , Select the desired date display , Set the numeric value with the , Select [OK] with the control format with the control buttons control buttons v/V, then button v, then press EXEC. v/V, then press EXEC. press EXEC. The date and time are entered and the clock Select from [Y/M/D] (year/month/day), The item to be set is indicated with v/V. starts to keep time. [M/D/Y] (month/day/year) or [D/M/Y] After entering the number, v/V moves to (day/month/year). Then DATE&TIME the next item. Repeat this step until all of • If you make a mistake, select [CANCEL] in SET screen appears on the LCD screen. the items are set. step 4 to display the DATE NOTATION screen, then repeat the procedure from step 2. • To cancel the date and time setting, select • If the rechargeable button battery, which • Midnight is displayed as 12:00AM and noon is [CANCEL], then press EXEC. provides the power for saving the time data, is displayed as 12:00PM. ever fully discharged (page 82), the DATE • If you selected [D/M/Y] in step 2, set the time NOTATION screen will appear again. When on a 24-hour cycle. this happens, reset the date and time, by starting from step 2.,

Shooting still images Inserting and removing a “Memory Stick Duo”

Shooting still images Terminal side Access lamp123, Open the battery/“Memory , Insert the “Memory Stick Duo.” , Close the battery/“Memory

Stick Duo” cover. Stick Duo” cover.

Holding the “Memory Stick Duo” as shown Hold the camera with the battery/“Memory in the illustration, insert it all the way in To remove a “Memory Stick Duo” Stick Duo” cover up, then slide the cover in until it clicks. Open the battery/“Memory Stick Duo” the direction of the arrow 1 while pressing cover, then push the “Memory Stick Duo” OPEN. The battery/“Memory Stick Duo” • When you insert the “Memory Stick Duo,” to pop it out. cover opens in the direction of the arrow 2. make sure it is facing in the correct direction, and push it all the way in so that it is securely • When the access lamp is lit up, it means • seated in the connector. If the “Memory Stick For details on the “Memory Stick Duo,” see that image data is being read or written. Duo” is not inserted correctly, you may not be page 83. Never open the battery/“Memory Stick able to record or display images in the Duo” cover or turn off the power at this “Memory Stick Duo.” This may also damage time, as the data may be damaged. the camera or the “Memory Stick Duo.” • Be careful not to drop the batteries when opening or closing the battery/“Memory Stick Duo” cover.,

Setting the still image size

RETURN RETURN SIZE • BURST SIZE•BURST 2M SIZE•BURST 2M 2M 2M FOCUS AUTO FOCUS AUTO VGA VGA SELFTIMER OFF SELFTIMER OFF 2M BURST WHITE BAL AUTO WHITE BAL AUTO VGA BURST

MENU

1 2 EXEC/ EXEC/ , Set the mode switch to , and , Select [ ] with the control , Select the desired image size turn on the power, then press button v, then press EXEC. with the control buttons v/V, MENU. Select [SIZE·BURST] with the then press EXEC. control buttons v/V, then The menu appears on the LCD screen. The image size is set. press EXEC. When you press MENU, the menu • Open the lens cover when closed. The image size is displayed. disappears and the indicator is displayed on the LCD screen. • For details on the image size, see page 19. • The image size selected here is maintained even when the power is turned off.,

Image size

You can choose the image size (number of Shooting still images pixels) according to the kind of images you want to shoot. The larger you make the image size, the better your image, but also the larger the amount of data needed to preserve your image. This means you can save fewer images in your “Memory Stick Duo.” Choose an image size appropriate for the kind of images you want to shoot. Image size Examples 2M* Printing postcard size (1632×1224) images VGA • Shooting more images (640×480) • Attaching images to e-mail or creating home pages * The factory setting is [2M].

Number of images that can be saved in a “Memory Stick Duo”

(Units: number of images) Capacity 8MB 16MB 32MB 64MB 128MB MSX-M256 MSX-M512 Image size 2M 14 29 60 122 245 445 906 VGA 80 161 326 656 1316 2380 4840 • When the images recorded using earlier Sony • The actual number of images may differ models are played back, the image size depending on the shooting conditions. indication may be different from the actual • When the number of remaining shooting image size. images is greater than 9,999, >9999 indicator • Images viewed on the LCD screen of the appears on the LCD screen. camera all appear the same size.,

Basic still image shooting — Using auto adjustment mode

2M 101 AE/AF lock indicator Flashes green123tLights up , Set the mode switch to , and , Hold the camera steadily with , Press and hold the shutter slide the lens cover to turn on both hands and position the button halfway down. the power. subject in the center of the LCD A beep sounds. When the AE/AF lock screen. The name of the folder where the image will indicator changes from flashing to light-up, be recorded appears on the LCD screen for Do not cover the lens or flash with your the camera is ready for shooting. approximately five seconds. fingers. • If you release the shutter button, the recording • [FOCUS] is set to [AUTO] at the factory. will be canceled.• When recording outdoors during clear weather • The exposure is automatically adjusted. • When the camera does not beep, the AF or under other intense light, undesired light • This camera can create new folders and select adjustment is not complete. You can continue to (ghosting) may enter the screen. If this folders to be stored in the “Memory Stick Duo” shoot, but the focus is not adjusted properly.happens, shade the lens with your hand or other (page 24). • This camera employs an auto-macro AF object while recording. function. The minimum focal distance to the • The exposure and focus are adjusted to the subject is 10 cm (4 inches). center of the LCD screen.,

Auto Focus LCD light

Shooting still images 2M When you try to shoot a subject that is You can use [LCD LIGHT] under [ ] difficult to focus on, the AE/AF lock with MENU and the control buttons v/V to indicator changes to flashing slowly. turn the LCD light on and off. This is useful The Auto Focus function may have for extending the battery life. difficulty working under the following We recommend that you set [LCD LIGHT] conditions. In such cases, release the shutter to [OFF] when using alkaline batteries. button, then recompose the shot and focus 4 again. If the Auto Focus function can still • This camera is equipped with a Hybrid-type not bring the subject into focus, use the LCD screen that allows you to see the LCD Focus preset function (page 30). screen even when the LCD light is turned off, , Press the shutter button fully as long as there is some ambient illumination. • Even if the LCD light setting is [OFF], the LCD down. • The subject is distant from the camera and dark. light will turn on when menu operations are • The contrast between the subject and its being performed. When the menu operation is A beep sounds. When “RECORDING” background is poor. completed, the LCD light will turn off again. disappears from the LCD screen, recording • The subject is seen through glass, such as a is complete. The image will be recorded in window. the “Memory Stick Duo,” and you can • A fast-moving subject. • The subject reflects or has a lustrous finish, shoot the next image. such as a mirror or a luminous body. • A flashing subject. • If you do not operate the camera for about three • A backlit subject. minutes during recording or playback, the camera turns off automatically to prevent wearing down the batteries (page 15).,

Using the self-timer LCD screen display during

shooting RETURN RETURN SIZE•BURST 2M SIZE•BURST 2M You can use [DISPLAY] under [ ] with FOCUS AUTO FOCUS AUTO MENU and the control buttons v/V to turn SELFTIMER OFF SELFTIMER OFF the display on and off. This is useful when WHITE BAL AUTO WHITE BAL AUTO recording under conditions where it is difficult to check the image on the LCD MENU screen. When [DISPLAY] is [ON] 1 2 EXEC/ All indicators are displayed. 2M 101 , Set the mode switch to , and , Select [ ] with the control press MENU. button v, then press EXEC.

Select [SELFTIMER] with the

The menu appears on the LCD screen. control buttons v/V, then • You can also carry out this operation when the press EXEC. mode switch is set to . When [DISPLAY] is [OFF] • When the mode switch is set to , select Warning messages, etc. are displayed. [ ] with the control button v. • For detailed descriptions of the indicators, see page 87. • Indicators on the LCD screen are not recorded., Shooting still images SELFTIMER 2M 101 2M 101 10 10

ON OFF

Self-timer lamp EXEC/ 3 4 , Select [ON] with the control , Center the subject in the LCD button v, then press EXEC. screen and press the shutter When you press MENU, the menu button fully down. disappears and the (self-timer) indicator The self-timer lamp flashes red and a appears on the LCD screen. continuous beep sounds. The image will be shot after approximately 10 seconds. To cancel the self-timer in the middle of the operation Close the lens cover or press POWER to turn off the power. • If you press the shutter button while standing in front of the camera, the focus and the exposure may not be correctly set.

Selecting a flash mode

2M 101 , Set the mode switch to , and press the control button v ( ) repeatedly to select a flash mode. Each time you press v ( ), the indicator changes as follows. No indicator (Auto): Based on the lighting conditions, the camera will decide if there is enough light, and will use the flash accordingly. (Red-eye reduction): Flash mode is set to Auto, and the red-eye reduction operates if the flash strobes. (Forced flash): The flash strobes regardless of the surrounding brightness. (No flash): The flash does not strobe., • You cannot use the flash in the Burst mode. Red-eye reduction • If the menu is currently displayed, press MENU first so that the menu disappears. The flash pre-strobes before shooting to • The recommended shooting distance using the reduce the red-eye phenomenon. flash is approximately 0.5 m to 1.8 m (1 foot 7 3/4 inches to 5 feet 10 3/4 inches). The recommended shooting distance for (Red- eye reduction) is approximately 0.5 m to 1.5 m (1 foot 7 3/4 inches to 4 feet 11 inches). • When using the Auto, (Red-eye reduction) or (Forced flash) mode, you may notice some noise in the image when you look at the LCD screen in a dark place, but this will have no effect on the shot image. • While you are using (No flash) mode, the shutter speed is slower in a dark place. Be careful not to allow your hand to shake while holding the unit. • While charging the flash, the (Flash charge) lamp flashes. After the charging is complete, the lamp goes out. • Red-eye reduction may not produce the desired • This setting is maintained even when the power effects depending on individual differences, the is turned off. distance to the subject, if the subject does not see the pre-strobe, or other conditions.

Creating or

selecting a folder Your camera can create multiple folders in a “Memory Stick Duo.” Also, you can select the folder used to store images. When not creating a new folder, “101MSDCF” folder is selected as the recording folder. You can create folders up to “999MSDCF.” • Up to 4,000 images can be stored in one folder. When the folder capacity is exceeded, a new folder is automatically created.,

Creating a new folder

Shooting still images

RETURN

SIZE•BURST 2M FOCUS AUTO SELFTIMER OFF WHITE BAL AUTO

MENU

, Set the mode switch to , and turn on the power, then press

MENU.

The menu appears on the LCD screen. • You can also carry out this operation when the mode switch is set to . • You cannot specify the number of a new folder that you create. RETURN 101

FORMAT

CREATE FOLDER CHANGE FOLDER 2 EXEC/ , Select [ ] with the control button V, then press EXEC.

Select [CREATE FOLDER] with

the control buttons v/V, then press EXEC. The CREATE REC. FOLDER screen appears. • Once you create a new folder, you cannot delete the new folder with the camera. • Images are recorded in the newly created folder until a different folder is created or selected. CREATE REC.FOLDER

CREATING

102MSDCF

OK CANCEL

3 EXEC/ , Select [OK] with the control button v, then press EXEC. A new folder is created with a number one higher than the largest number in the “Memory Stick Duo,” and the folder becomes the recording folder. When you press MENU, the menu disappears and the created folder is displayed. To cancel folder creation Select [CANCEL] in step 3.,

Selecting the recording folder

RETURN RETURN 101 CHANGE REC. FOLDER SIZE•BURST 2M FORMAT : 102MSDCF FOCUS AUTO CREATE FOLDER : 0 IMAGE SELFTIMER OFF CHANGE FOLDER CREATED: WHITE BAL AUTO 2003741:05PM

MENU

1 2 EXEC/ 3 EXEC/ , Set the mode switch to , , Select [ ] with the control , Select the desired folder with then press MENU. button V, then press EXEC. the control buttons v/V, then

Select [CHANGE FOLDER] press EXEC.

The menu appears on the LCD screen. with the control button V, then • You can also carry out this operation when the press EXEC. • You cannot select the “100MSDCF” folder as a mode switch is set to . recording folder. The CHANGE REC. FOLDER screen • The image is stored in the newly selected appears. folder. You cannot move recorded images to a different folder with this camera., Shooting still images CHANGE REC. FOLDER : 102MSDCF

OK CANCEL

4 EXEC/ , Select [OK] with the control button v, then press EXEC. When you press MENU, the menu disappears and the selected folder is displayed. To cancel changing the recording folder Select [CANCEL] in step 4.,

Shooting according to scene conditions — Scene Selection

When shooting portraits, landscapes, Illumination snap mode Twilight mode twilight scenes, twilight portraits, or moving subjects, use the modes below to This mode lets you capture beautiful images This mode lets you shoot night scenes at far improve the quality of your images. of both subjects and night scene distances without losing the dark backgrounds at the same time. In addition, atmosphere of the surroundings.

Soft snap mode the cross filter effect enhances street lamps

or other lights with cross-shaped rays. This mode lets you shoot skin colors in brighter and warmer tones for more beautiful pictures. In addition, the soft focus effect creates a gentle atmosphere for portraits of people, flowers, etc. • Note that as shutter speeds decrease, shaking increases. • Note that as shutter speeds decrease, shaking • The focus setting changes to [ ]. increases. • The flash cannot be used in this mode. • The flash strobes in red-eye reduction mode. • When the focus setting is set to [AUTO], the • When setting the focus to [AUTO], the focus is focus is adjusted to telephoto. adjusted to approximately1mto (infinite). To record subjects closer than 1 m, use the Focus preset (page 30).,

Vivid nature mode To cancel Scene Selection

Shooting still images 2M 101 Press V (SCENE) repeatedly to set to No This mode enhances blues and greens such 10 indicator (Auto). as the sky, ocean and mountains, letting you shoot natural landscapes with vivid, striking • If the menu is currently displayed, press MENU colors. first so that the menu disappears. • You cannot use the Scene Selection when shooting movies. • The setting selected here returns to Auto when the power is turned off. , Set the mode switch to , and • The focus setting changes to [ ]. turn on the power. • The flash cannot be used in this mode. Press the control button • When the focus setting is set to [AUTO], the focus is adjusted to telephoto. V (SCENE) repeatedly to select a desired mode.

Active outdoor mode

Each time you press V (SCENE), the This mode lets you stop the movement of indicator changes as follows: your subject and get lively shots of those (Soft snap mode) t (Illumination moving objects in bright outdoor snap mode) t (Twilight mode) t conditions. (Vivid nature mode) t (Active outdoor mode) t No indicator (Auto) • When setting the focus to [AUTO], the focus is adjusted to approximately1mto (infinite).,

Setting the distance to the subject — Focus preset

RETURN RETURN 0.5 m 0.2 m SIZE•BURST 2M SIZE•BURST 2M FOCUS AUTO FOCUS AUTO SELFTIMER OFF SELFTIMER OFF WHITE BAL AUTO WHITE BAL AUTO

MENU

1 2 EXEC/ When shooting an image using a previously , Set the mode switch to , and , Select [ ] with the control set distance to the subject, or when shooting turn on the power, then press button v, then press EXEC. a subject through a net or window glass, it MENU. Select [FOCUS] with the is difficult to achieve a proper focus using control buttons v/V, then the auto focus function. The Focus preset is The menu appears on the LCD screen. useful in these cases. press EXEC. • You can also carry out this operation when the mode switch is set to . • When the mode switch is set to , select [ ] with the control button v. • Focus setting information is approximate, and should be used as a reference., Shooting still images

FOCUS AUTO

0.2m 0.5m 1.0m EXEC/ , Select the desired focus setting with the control buttons v/V, then press EXEC. You can select from the following distance settings: AUTO (No indicator), 0.2 m, 0.5 m, 1.0 m, and (infinity) When you press MENU, the menu disappears and the indicator is displayed on the LCD screen. To return to auto focus mode Select [AUTO] in step 3. • The setting selected here returns to [AUTO] when the power is turned off.

Shooting images continuously — Burst

RETURN RETURN SIZE•BURST 2M SIZE•BURST 2M FOCUS AUTO FOCUS AUTO SELFTIMER OFF SELFTIMER OFF WHITE BAL AUTO WHITE BAL AUTO

MENU

1 2 EXEC/ , Set the mode switch to , and , Select [ ] with the control turn on the power, then press button v, then press EXEC. MENU. Select [SIZE·BURST] with the control buttons v/V, then The menu appears on the LCD screen. press EXEC. • You cannot use the flash in this mode. • The recording interval is approximately 0.5 seconds. However, the recording interval may be longer in a dark place., SIZE • BURST V2.G0MA 101 2M 2M VGA VGA 2M BURST VGA BURST 3 EXEC/ 4 , Select [ 2M BURST] or [ VGA , Press the shutter button

BURST] with the control halfway down, then hold the

buttons v/V, then press EXEC. shutter button fully down. The image size used for burst shooting is Up to two images are recorded with 2M or set. up to ten images are recorded with VGA Press MENU so that the menu disappears while you hold down the shutter button. from the LCD screen. • If you release the shutter button in the middle of • For details on the image size, see page 19. shooting, shooting will stop at that point. Only the images that were shot while the shutter button was held down are recorded.,

Adjusting color tones — White Balance

When the white balance is set to Auto, the Shooting still images white balance function works RETURN RETURN automatically, and the overall color balance SIZE•BURST 2M SIZE•BURST 2M is adjusted according to the shooting FOCUS AUTO FOCUS AUTO conditions. However, when you shoot SELFTIMER OFF SELFTIMER OFF WHITE BAL AUTO WHITE BAL AUTO under fixed conditions or special lighting conditions, you can manually adjust the MENU white balance. EXEC/ No indicator (Auto) 1 2 Adjusts the white balance automatically , Set the mode switch to , and , Select [ ] with the control (Daylight) turn on the power, then press button v, then press EXEC. Shooting outdoors, shooting night scenes, MENU. Select [WHITE BAL] with the neon signs, fireworks or sunrises, or control button V, then press shooting just before and after sundown The menu appears on the LCD screen.

EXEC.

(Cloudy) • You can also carry out this operation when the Shooting under a cloudy sky mode switch is set to . • When the mode switch is set to , select [ ] with the control button v. • Under fluorescent lights that flicker, the white (Fluorescent) balance adjustment function may not work Shooting under fluorescent lighting correctly even though you select (fluorescent). (Incandescent) • Places where the lighting conditions change quickly • Under bright lighting such as photography studios, z Shooting techniques WHITE BALANCE The image is affected by the lighting

AUTO

conditions. For example, the entire image appears blue under sunlight in the summer, and white items gain a reddish tint under incandescent light bulbs, etc. The human eye can resolve these problems, but digital still cameras cannot recognize the correct 3 EXEC/ colors without adjustments. Normally, the camera makes these adjustments automatically, but if recorded , Select the desired mode with image colors appear unnatural, we the control buttons v/V, then recommend that you adjust the white press EXEC. balance. When you press MENU, the menu disappears and the selected mode is displayed on the LCD screen. To reactivate auto adjustment Select [AUTO] in step 3. • When the flash strobes, the manual setting is canceled, and the image is recorded in the Auto mode. • The mode you have selected here is maintained even when the power is turned off., Enjoying still images

Viewing still images

on the LCD screen Enjoying still images Single (single- Index (four-image) image) screen screen 2M 101 7 / 8 101-0007 20037412:00PM You can view images shot with your camera almost immediately on the LCD screen. You can select the following two methods for viewing images.

Single (single-image) screen

You can view one image at a time, displayed over the entire screen.

Index (four-image) screen

Four images are displayed simultaneously in separate panels on the screen. • For detailed descriptions of the screen indicators, see page 88. • For details on viewing movies, see page 49.

Viewing single images

2M 101 7 2M 101 6 / 8 / 8 101-0007 101-0006 20037412:00PM 20037410:30AM12, Set the mode switch to , and , Select the desired still image turn on the power. with the control buttons v/V. The last image in the selected recording v : To display the preceding image folder (page 26) appears on the LCD V : To display the next image screen. • If you close the lens cover while viewing images, the power shuts off.,

Viewing an index screen (four-image)

To return to the single-image screen RETURN RETURN Select [SINGLE] in step 2. Or when four DELETE DELETE frames are displayed, press EXEC to DELETE IN FOLDER DELETE IN FOLDER display the single image shown with the INDEX INDEX yellow border. DPOF DPOF

MENU

1 2 EXEC/ , Set the mode switch to , and , Select [ ] with the control press MENU. button v, then press EXEC. Select [INDEX] with the control The menu appears on the LCD screen. buttons v/V, then press EXEC. The display switches to the index (four- image) screen. To display the next (previous) index screen Press the control buttons v/V to move the yellow border.,

Selecting the folder and playing back images — Folder

Enjoying still images RETURN RETURN 101 CHANGE FOLDER DELETE FORMAT : 102MSDCF DELETE IN FOLDER PRINT : 1 IMAGE INDEX CHANGE FOLDER CREATED: DPOF 2003741:05PM

MENU

1 2 EXEC/ 3 EXEC/ Set the mode switch to , and , Select [ ] with the control , Select the desired folder with , turn on the power, then press button V, then press EXEC. the control buttons v/V, then MENU. Select [CHANGE FOLDER] press EXEC. with the control button V, then The menu appears on the LCD screen. press EXEC. The CHANGE FOLDER screen appears.,

When multiple folders are

CHANGE FOLDER created in the “Memory Stick : 102MSDCF Duo” OK When the first or last image in the folder is CANCEL displayed, the following indicators appear on the LCD screen. : Moves to the previous folder. : Moves to the next folder. 4 EXEC/ : Moves to both the previous and next folders. , Select [OK] with the control button v, then press EXEC. Single (single- Index (four-image) image) screen screen When you press MENU, the menu 2M 101 4 disappears and the selected folder is / 4 displayed. 101-0004 To cancel the selection 20037412:00PM Select [CANCEL] in step 4. • When no images are stored in the folder, “NO FILE IN THIS FOLDER” appears. • You can play back images from the last-shot one without selecting the folder.,

Enlarging an image — Enlarged playback

You can zoom in on an image shot with Enjoying still images your camera to enlarge it to 2.5 or 5 times 2M 101 7 2.5 the original size. / 8 1× (normal) 101-0007 2003741:30PM12EXEC/ 2.5× , Set the mode switch to , and , Press EXEC/ (Enlarged turn on the power. playback) repeatedly to select Select the image you want to the desired enlargement level. enlarge with the control The center of the screen is enlarged. Each buttons v/V. time you press EXEC/ (Enlarged 5× playback), the enlargement level changes as • Enlarged playback does not function for follows. movies. 2.5× t 5× t normal (no indicator) t ... • You may not be able to enlarge images recorded using other devices. • The enlarged image cannot be recorded as a To cancel Enlarged playback new file. Press EXEC/ (Enlarged playback) repeatedly to set to normal (no indicator). • You can only enlarge the center of the screen.,

Choosing images to print — Print (DPOF) mark

You can mark still images shot with your camera that you want to have printed. This 2M 101 6 RETURN function is convenient when you have / 8 DELETE images printed at a shop or using a printer DELETE IN FOLDER that conforms with the DPOF (Digital Print 101-0006 INDEX Order Format) standard. 20037410:30AM

DPOF

• You cannot mark movies. EXEC/ • You cannot specify the number of copies you want to have printed. 1 2 MENU , Set the mode switch to , and , Press MENU, and select [ ] turn on the power. with the control button v, then Display the image you want to press EXEC. print with the control buttons v/V. To mark the print (DPOF) mark in index-image screen Perform step 2 on page 36 and switch to index screen., Enjoying still images RETURN DPOF

DELETE

DELETE IN FOLDER INDEX ON DPOF OFF 3 EXEC/ 4 EXEC/ , Select [DPOF] with the control , Select [ON] with the control button V, then press EXEC. button v, then press EXEC. When you press MENU, the menu disappears and the mark is marked on the displayed image. To unmark the print (DPOF) mark Select [OFF] in step 4. The mark disappears.,

Connecting your camera to a PictBridge compliant printer

If you use a PictBridge compliant printer, you can easily print images shot with this 2M 101 6 RETURN 101 camera even if you do not have a computer. / 8 FORMAT All you need to do is to prepare for the PRINT connection in the menu of the camera, and 101-0006 CHANGE FOLDER then to connect the camera to the printer 20037410:30AM using a USB cable. EXEC/ 1 2 MENU • Do not connect the camera to a printer in the following situations. Proper operation is not , Set the mode switch to , and , Press MENU, and select guaranteed. turn on the power. with the control button V, then – The printer is not PictBridge compliant. – There is no battery in the camera, or there is Display the image you want to press EXEC. insufficient power remaining in the batteries. print with the control buttons v/V. Do not connect your camera to your printer at this time., Enjoying still images RETURN 101 CONNECT A FORMAT PRINTER PRINT CONNECTING CHANGE FOLDER PictBridge

CANCEL

3 EXEC/ 4 , Select [PRINT] with the control , Connect the camera to the buttons v/V, then press EXEC. printer. The message “CONNECT A The message “CONNECTING PictBridge” PRINTER” appears. appears. When the connection is completed, the To cancel preparations to make the selected image is displayed and the connection Select [CANCEL] in step . (PictBridge) mark appears on the screen.3,

Printing images

2M 101 6 RETURN RETURN / 8 PRINT 1 PAGE PRINT 1 PAGE INSERT DATE INSERT DATE 101-0006 20037410:30AM EXEC/ EXEC/ 1 2 MENU 3 , Complete the procedures in , Press MENU, and select [ ] , Select [PRINT 1 PAGE] with the steps 1 to 4 on pages 42 and with the control button v, then control buttons v/V, and press 43, then connect the camera to press EXEC. EXEC. the printer. • If you set [LCD LIGHT] to [OFF] under [ ] When the connection is completed, the in the MENU, you can extend the battery life. (PictBridge) mark appears on the screen. • If a warning message appears on the screen, check the meaning of the message on page 76, then select [EXIT] with EXEC., To cancel printing To disconnect the printer Enjoying still images PRINT 1 PAGE Select [CANCEL] in step 4. After confirming that the message “PRINTING” has disappeared, disconnect PRINTING To print other images the USB cable. The camera turns off, and

OK

CANCEL CANCEL Select the image you want to print with the the connection is ended. control buttons v/V in step 1. To change a folder, select [CHANGE FOLDER] under [ ] in the MENU, and / then select the folder containing the image 4 EXEC you want to print. , Select [OK] with the control To attach a date to an image button v, then press EXEC. Select [INSERT DATE], and select the desired date display format with the control When the message “PRINTING” buttons v/V. disappears, printing is completed. You can select [D/HR/MIN] or [Y/M/D] *. If you want to print the same image again, The date will be attached to the image to be repeat the procedure from step 2. printed. Some printers may not support this • While the mark is on the screen, do not function. disconnect the USB cable or remove a “Memory Stick Duo” or the batteries from the * The setting selected in [DATE NOTATION] camera. under [CLOCK SET] (page 15) is displayed.,

Enjoying movies Shooting movies

RETURN RETURN SIZE SIZE 320 SIZE 320 FOCUS AUTO FOCUS AUTO SELFTIMER OFF SELFTIMER OFF 320 320×240 WHITE BAL AUTO WHITE BAL AUTO 160 160×112

MENU

EXEC/ 123EXEC/ , Set the mode switch to , and , Select [ ] with the control , Select [ 320 320×240] or open the lens cover to turn on button v, then press EXEC. [ 160 160×112] with the control the power. Select [SIZE] with the control buttons v/V, then press EXEC.

Press MENU. buttons v/V, then press EXEC.

The image size is set. The menu appears on the LCD screen. The image size is displayed. When you press MENU, the menu disappears and the indicator is displayed on • Sound cannot be recorded in movies. • For details on the shooting time for each image the LCD screen. • When shooting a movie, the image may look size, see page 48. like a single-frame advance. However, the • The image size selected here is maintained even recorded movie will be normal. when the power is turned off., Enjoying movies 320REC 101 320 101 0:00/ 16:3245, Press the shutter button fully , To stop recording, press the down. shutter button fully again. “REC” appears on the LCD screen and the Indicators during shooting camera starts recording the image. Indicators on the LCD screen are not recorded. You can use [DISPLAY] under • Recording stops when the “Memory Stick Duo” is full. [ ] with MENU and the control buttons • The auto focus function can set the focus at any v/V to turn the display on and off distance from approximately 1.0 m to (page 22). (infinity). To shoot a subject at a closer For detailed descriptions of the indicators, distance than 1.0 m, select 0.2 m or see page 87. 0.5 m with the Focus preset function (page 30). • The flash does not function when shooting movies. To use the self-timer Complete step 3, then follow the procedure on page 22.,

Shooting time

The shooting time is different, depending on the capacity of the “Memory Stick Duo” and the image size. Refer to the following chart when you choose a “Memory Stick Duo.” Image size 160×112 320×240 Capacity 8MB 5 min. 35 sec. 1 min. 26 sec. 16MB 11 min. 13 sec. 2 min. 54 sec. 32MB 22 min. 43 sec. 5 min. 52 sec. 64MB 45 min. 40 sec. 11 min. 48 sec. 128MB 1 h. 31 min. 34 sec. 23 min. 39 sec. MSX-M256 2 h. 45 min. 35 sec. 42 min. 47 sec. MSX-M512 5 h. 36 min. 43 sec. 1 h. 27 min. 1 sec. • The shooting time may vary, depending on the shooting conditions. • For numbers of still images that can be recorded, see page 19. • When shooting time exceeds 99 minutes 59 seconds “>99:59” is displayed.,

Viewing movies on the LCD screen

Enjoying movies 320 101 18 320 101 16 320 101 16 0:00 0:00 0:05 101–0018 101–0016 101–0016 20037412:00PM 20037410:30AM EXEC/ 123, Set the mode switch to , and , Select the desired movie with , Press EXEC. turn on the power. the control buttons v/V. The movie is played back. The last image in the selected recording v : To display the preceding image folder (page 26) appears on the LCD V : To display the next image To stop playback screen. Press EXEC. An image shot with a size of [ 320 320×240] is displayed full-sized on the screen, and an Indicators while viewing movies image shot with a size of [ 160 160×112] is Indicators on the LCD screen are not displayed in a smaller size. recorded. You can use [DISPLAY] under [ ] with MENU and the control buttons • Movies cannot be rewound or fast-forwarded v/V to turn the display on and off with this camera. (page 22). For detailed descriptions of the indicators, see page 88., Deleting images

Deleting images

2M 101 7 RETURN RETURN / 8 DELETE DELETE DELETE IN FOLDER DELETE IN FOLDER 101-0007 INDEX INDEX 20037412:00PM DPOF DPOF EXEC/ 123EXEC/MENU , Set the mode switch to , and , Press MENU and select [ ] , Select [DELETE] with the turn on the power. with the control button v, then control buttons v/V, then Press the control buttons v/V press EXEC. press EXEC. to select the image you want to To delete an image in index-image The image has not yet been deleted at this delete. screen point. Perform step 2 on page 36 and switch to To delete all the images in the folder index screen. Select [DELETE IN FOLDER] in step 3. • You cannot delete images write-protected by another device., Deleting images

DELETE OK CANCEL

4 EXEC/ , Select [OK] with the control button v, then press EXEC. When the message “MEMORY STICK ACCESS” disappears, the image has been deleted. To cancel deleting Select [CANCEL] in step 4.

Formatting a “Memory Stick Duo” RETURN DELETE

DELETE IN FOLDER

INDEX DPOF MENU

1 2 , Insert the “Memory Stick Duo” , Turn on the power, and press you want to format into the MENU. camera. The menu appears on the LCD screen. Do not open the battery/“Memory Stick Duo” cover while formatting the “Memory • When you format a “Memory Stick Duo,” Stick Duo” as this may damage the note that all data in the “Memory Stick Duo,” including images that were write- “Memory Stick Duo.” protected by another device, will be permanently erased. • The term “formatting” means preparing a • When you format a “Memory Stick Duo,” be “Memory Stick Duo” to record images; this sure that sufficient power remains, otherwise a process is also called “initialization.” The “FORMAT ERROR” may occur. “Memory Stick Duo” provided with this camera, and those available commercially, are already formatted, and can be used immediately. • This operation is available no matter what position the mode switch is in., RETURN 101 FORMAT

FORMAT PRINT

CHANGE FOLDER OK FORMATTING

CANCEL

3 EXEC/ 4 EXEC/ , Select [ ] with the control , Select [OK] with the control button V, then press EXEC. button v, then press EXEC. Select [FORMAT] with the When the message “FORMATTING” control buttons v/V, then disappears, the format is complete. press EXEC. To cancel formatting Select [CANCEL] in step 4.,

Enjoying images on your computer

Enjoying images on your computer

Copying images to your computer — For Windows users Recommended computer USB mode copy images using an additional device. See

environment There are two modes for a USB connection, the Sony Website for details. OS: Microsoft Windows 98, Windows [NORMAL] and [PTP]* modes. The http://www.sony.net/ 98SE, Windows 2000 Professional, factory setting is the [NORMAL] mode. Windows Millennium Edition, Windows This section describes the USB connection Contents of the CD-ROM XP Home Edition, or Windows XP using the [NORMAL] mode. x USB Driver Professional When the camera is connected to your This driver is needed in order to connect the The above OS must be installed at the computer via a USB cable, the camera can camera to a computer. factory. Operation is not assured in an draw its power from your computer (USB • When using Windows XP, you need not install environment upgraded to the operating Bus Powered). the USB driver. systems described above or in a multi-boot * Compatible only with Windows XP. When x Image Transfer environment. connected to a computer, only the data in the This application is used to easily transfer CPU: MMX Pentium 200 MHz or faster folder selected by the camera is copied to the USB connector: Provided as standard computer. To select a folder when the camera is images from the camera to a computer. Display: connected to your computer, press MENU and 800 × 600 dots or more x ImageMixerperform the procedures to change a folder for High Color (16-bit color, 65,000 colors) or This application is used to display and edit playback. more images that are stored in a computer.

Communication with your

• If you connect two or more USB equipment to computer • The required operations may differ depending a single computer at the same time, some on your OS. equipment, including your camera, may not When your computer resumes from the • Close down all applications running on operate depending on the type of USB suspend or sleep mode, communication the computer before installing the USB equipment. between your camera and your computer driver and application. • Operations are not guaranteed when using a • When using Windows XP or Windows 2000, may not recover at the same time. USB hub. log on as Administrator. • Operations are not guaranteed for all the • The display settings should be 800 × 600 dots When a USB connector is not recommended computer environments or more and High Color (16-bit color, 65,000 mentioned above. provided on your computer colors) or more. When set to less than 800 × When neither a USB connector nor a 600 dots or 256 colors or less, the model selection screen does not appear. “Memory Stick” slot is provided, you can,

Installing the USB driver c Click [USB Driver] on the e Click [Yes, I want to restart my

installing menu screen. computer now], then click When using Windows XP, you need not install the USB driver. [Finish]. Once the USB driver is installed, you need not install the USB driver again. a Start up your computer, and insert the supplied CD-ROM into the CD-ROM drive. Do not connect your camera to your computer at this time. The “InstallShield Wizard” screen appears. Your computer restarts. Then, you can The model selection screen appears. If establish USB connection. d Click [Next]. When the it does not appear, double-click (My Computer) t (ImageMixer) “Information” screen appears, in that order. click [Next]. b Click [Cyber-shot] on the model selection screen. The installing menu screen appears. The USB driver installation starts. When the installation is completed, the screen informs you of completion., Enjoying images on your computer

Installing “Image Transfer” c Click [Next]. When the e Select the folder to be

“Licence Agreement” screen installed, then click [Next]. You can use the “Image Transfer” software to copy images to your computer appears, click [Yes]. Select the program folder, then automatically when you connect the camera click [Next]. to your computer with the supplied USB cable. a Click [Cyber-shot] on the model selection screen. Read the agreement carefully. If you accept the terms of the agreement, The installing menu screen appears. f Confirm that the checkbox is proceed with the installation. The b Click [Image Transfer] on the “Information” screen appears. checked on the “Image Transfer Settings” screen, installing menu screen. d Click [Next]. then click [Next]. Select the desired language, then click [OK]. When the installation is completed, the screen informs you of completion. The “Welcome to the InstallShield Wizard for Image Transfer” screen appears. • This section describes the English screen. 5, g Click [Finish]. Installing “ImageMixer” c Restart your computer according to the instructions You can use the “ImageMixer Ver.1.5 for Sony” software to copy, view, and edit that appear on the screen. images and to create Video CDs. For d Remove the CD-ROM. details, see the software’s help files. a Click [ImageMixer] on the installing menu screen.

Select the desired language,

The “InstallShield Wizard” screen then click [OK]. closes. If you wish to continue with the installation of “ImageMixer,” click [ImageMixer] on the installing menu screen and then follow the instructions that appear on the screen. • The USB driver is needed in order to use “Image Transfer.” If the necessary driver is not already installed on your computer, a screen that asks if you want to install the driver will The “Welcome to the InstallShield appear. Follow the instructions that appear on Wizard” screen appears. the screen. • This section describes the English screen. b Follow the instructions on each succeeding screen. Install “ImageMixer” according to the instructions that appear on the screen. • When you use Windows 2000 or Windows XP, install “WinASPI”. • If DirectX8.0a or a later version is not installed in your computer, the “Information” screen appears. Follow the instructions that appear on the screen., Enjoying images on your computer

Connecting the camera to c Open the USB jack cover, and • Note that the power cannot be turned on if a

your computer connect the supplied USB “Memory Stick Duo” is not inserted in the camera. cable to the (USB) jack of a Insert the “Memory Stick Duo” • When you use a desktop computer, we the camera. recommend that you connect the USB cable to with the images you want to the USB connector on the rear panel. copy into the camera. • When using Windows XP, the AutoPlay wizard automatically appears on the desktop. Proceed to page 60. (USB) jack USB MODE:NORMAL Access indicators* • Operations are not guaranteed when using a USB hub. Connect the USB cable directly to your computer, without “USB MODE: NORMAL” appears on • The camera can receive power supply from using a USB hub. the LCD screen of the camera. When a most of the computers that are recommended USB connection is established for the for use through the USB connection (USB Bus d Connect the USB cable to your first time, your computer automatically Powered), so in this case there is no need to computer. runs a program to recognize the insert batteries into the camera. camera. Wait for a while. • Removing the batteries before connecting the camera is recommended in order to prevent * During communication, the access indicators battery deterioration. turn red. • For further details on inserting the “Memory Stick Duo,” see page 17. • If “USB MODE: NORMAL” is not shown in step 4, confirm that [USB] is set to b Turn on your computer. [NORMAL] under [ ] in the menu (page 80). • If [USB] is set to [NORMAL], the POWER button, lens cover and other controls on the camera do not function. The camera turns on.,

P Disconnecting the USB Copying images using — Windows XP

cable from your computer or “Image Transfer” Connect the camera and your removing the “Memory Stick computer with the USB cable.— Windows 98/98SE/2000/Me

Duo” from your camera during “Image Transfer” starts up automatically Connect the camera and your

a USB connection and the images are automatically copied to computer with the USB cable. the computer. For Windows 2000, Me, or XP users “Image Transfer” launches and the images Windows XP is set so that the OS AutoPlay are automatically copied to the computer. Wizard activates. 1 Double-click on the tasktray. If you want to cancel the setting, follow the Double-click here procedure below. a Click [Start], then click [My Computer]. b Right-click [Sony 2 Click (Sony DSC), then click [Stop]. MemoryStick], then click 3 Confirm the device on the confirmation [Properties]. screen, then click [OK]. c Cancel the setting. 4 Click [OK]. Step 4 is unnecessary for Windows XP users. 1 Click [AutoPlay].• Normally “Image Transfer” and “Date” folders 2 Set [Content type] to [Pictures]. 5 Disconnect the USB cable. are created inside the “My Documents” folder, and all of the image files recorded with the 3 Check [Select an action to perform] 6 Remove the “Memory Stick Duo.” camera are copied into these folders. under [Actions], select [Take no For Windows 98 or 98SE users • You can change the “Image Transfer” settings action], then click [Apply]. (page 59). 4 Set [Content type] to [Video files] Confirm that the access indicators (page 57) • When “ImageMixer” (page 56) is installed and and repeat step 3. Then, set on the LCD screen are turned white and image copying is completed using “Image [Content type] to [Mixed content] carry out from step 5 above. Transfer,” “ImageMixer” automatically and repeat step 3 again. • If you remove or insert the “Memory launches and images appear. 5 Click [OK]. Stick Duo” before disconnecting the USB The “Properties” screen closes. cable, the computer will not recognize the The OS AutoPlay Wizard does not camera. In that case, disconnect the USB start up automatically even if the cable and connect it to the computer USB connection is made next time. again., Enjoying images on your computer

Changing “Image Transfer” Copying images without When you try to copy an image

settings using “Image Transfer” to a folder in which an image with the same file name is You can change “Image Transfer” settings. — Windows 98/98SE/2000/Me Right-click the “Image Transfer” icon on stored If “Image Transfer” is not set to launch the tasktray, and select [Open Settings]. The The overwrite confirmation message automatically, you can copy images as settings you can set are as follows: [Basic], appears. When you overwrite the existing following procedure. [Copy], and [Delete]. image with the new one, the original file a Double-click [My Computer], data is deleted. Right-click here then double-click [Removable Changing a file name Disk]. When you want to copy an image file to The contents of the “Memory Stick your computer without overwriting a file Duo” inserted in your camera appear. with the same name, change the file name. • This section describes an example of copying Once you change the name, the image When “Image Transfer” starts, the window images to the “My Documents” folder. cannot be played back on your camera. If below appears. • When the “Removable Disk” icon is not shown, see page 60. you want to play back the image on your • When using Windows XP, see page 60. camera, follow the procedures on page 63. b Double-click [DCIM], then double-click the folder which contains the desired images. The folder opens. c Drag and drop the image files into the “My Documents” folder. When you select [Settings] from the above The image files are copied to the “My window, you can only change the [Basic] Documents” folder. setting., When the removable disk icon is — Windows XP e Select [Nothing. I’m finished not shown Copying images using the working with these pictures], 1 Right-click [My Computer], then click Windows XP AutoPlay Wizard then click [Next]. [Properties]. The “System Properties” screen appears. a Make a USB connection The “Completing the Scanner and Camera Wizard” screen appears. • When using Windows 2000, click [Hardware] (page 57). Click [Copy pictures after the “System Properties” screen appears. to a folder on my computer f Click [Finish]. 2 Confirm if other devices are already using Microsoft Scanner and The wizard closes. installed. Camera Wizard], then click 1 Click [Device Manager]. • To continue copying other images, follow the [OK]. 2 Confirm if there is a “ Sony DSC” procedure given under P on page 58 to with a mark. The “Scanner and Camera Wizard” disconnect the USB cable and reconnect it. screen appears. Then, perform the procedure from step13If you find either of the devices above, again. follow the steps below to delete them. b Click [Next]. 1 Click [ Sony DSC]. The images stored on the “Memory • When using Windows 2000, right-click Stick Duo” are displayed. [ Sony DSC]. 2 Click [Remove] (or [Uninstall] in c Click the checkbox of images Windows 2000). that you do not want to copy to The “Confirm Device Removal” your computer and remove the screen appears. 3 Click [OK]. checkmark, then click [Next]. The device is deleted. The “Picture Name and Destination” screen appears. Try the USB driver installation again using d Select a name and destination the supplied CD-ROM (page 54). for your pictures, then click [Next]. Image copying starts. When the copying is completed, the “Other Options” screen appears., Enjoying images on your computer

Viewing images on your

computer — Windows 98/98SE/2000/Me/XP a Click [Start] t [My

Documents].

The “My Documents” folder contents are displayed. • This section describes the procedure for viewing images copied in the “My Documents” folder. • When not using Windows XP, double-click [My Documents] on the desktop. • You can use the “ImageMixer Ver.1.5 for Sony” software to view and edit images on your computer. For details, see the software’s help files. b Double-click the desired folder and image file. The image is displayed.,

Image file storage

destinations and file names Image files recorded with your camera are grouped as folders in the “Memory Stick Duo.” Example: For Windows XP users Folder containing image data recorded using a camera without the folder creation function Folder containing image data recorded with this camera When no new folders have been created, this is only “101MSDCF” Folder containing movies and other image data recorded using a camera without the folder creation function Folder File name File meaning 101MSDCF DSC0ssss.JPG Still image files up to 999MSDCF MOV0ssss.MPG Movie files • Data in the “100MSDCF” or “MSSONY” folders is for playback only, and your camera cannot record images in these folders. • For more information about the folder, see page 24. • ssss stands for any number within the range from 0001 to 9999., Enjoying images on your computer

Viewing images from your b Copy the file to a folder in the

computer with this camera “Memory Stick Duo.” 1 Right-click the image file and click When you want to view an image file using [Copy]. this camera that has been copied to your 2 Select a [DCIM] folder in computer and has been deleted from the [Removable Disk] or [Sony “Memory Stick Duo,” copy the image file MemoryStick] in [My Computer]. back to the “Memory Stick Duo” from your 3 Right-click a [sss MSDCF] computer first. Then you can play back the folder in the [DCIM] folder and image with this camera. click [Paste]. sss stands for any number • If you have not changed any of the file names within the range from 100 to 999. that were given automatically to images shot with this camera, you can skip step 1. • When the overwrite confirmation message • You may not be able to play back a particular appears, change the file name by inputting image, due to its image size. another number in step 1. • You may not be able to play back images • If there is no folder in the “Memory Stick Duo,” processed on your computer with this camera. create a folder with the camera, then copy the a Right-click the image file, and image file to the folder (page 25). click [Rename].

Change the file name to

“DSC0ssss.” ssss stands for any number within the range from 0001 to 9999. • Extensions may be displayed, depending on the settings made on your computer. The extension for a still image is jpg, and for a movie is mpg. Do not change the extensions.,

Copying images to your computer — For Macintosh users Recommended computer USB mode When a USB connector is not

environment There are two modes for a USB connection, provided on your computer OS: Mac OS 9.1, 9.2, or Mac OS X (v10.0/ [NORMAL] and [PTP]* modes. The When neither a USB connector nor a v10.1/v10.2) factory setting is the [NORMAL] mode. “Memory Stick” slot is provided, you can The above OS must be installed at the This section describes the USB connection copy images using an additional device. See factory. using the [NORMAL] mode. the Sony Website for details. USB connector: Provided as standard When the camera is connected to your http://www.sony.net/ Display: 800 × 600 dots or more computer via a USB cable, the camera can 32,000-color mode or more draw its power from your computer (USB Bus Powered). • If you connect two or more USB equipment to a single computer at the same time, some * Compatible only with Mac OS X. When equipment, including your camera, may not connected to a computer, only the data in the operate depending on the type of USB folder selected by the camera is copied to the equipment. computer. To select a folder when the camera is • Operations are not guaranteed when using a connected to your computer, press MENU and USB hub. perform the procedures to change a folder for • Operations are not guaranteed for all the playback. recommended computer environments mentioned above. Communication with your computer When your computer resumes from the suspend or sleep mode, communication between your camera and your computer may not recover at the same time., Enjoying images on your computer a Connecting your camera to c Viewing the images on your your computer computer For details, see page 57. 1 Double-click the hard disk icon. 2 Double-click the desired image file in Disconnecting the USB cable from the folder containing the copied files. your computer or removing the The image file opens. “Memory Stick Duo” from your camera during USB connection • Close down all applications running on Drag and drop the drive icon or the the computer before installing an “Memory Stick” icon to the “Trash” icon, application. then disconnect the USB cable or remove • You can use the “ImageMixer Ver.1.5 for Sony” the “Memory Stick Duo.” software to copy images to your computer, to • If you are using Mac OS X v10.0, disconnect view images on your computer, and to create the USB cable, etc., after you have turned your video CDs. See the operation manual supplied computer off. with the CD-ROM for details about the installation method, or see the software’s help b Copying images files for the operation method. • “ImageMixer” is not compatible with Mac 1 Double-click the newly recognized icon OS X. on the desktop. • “Image Transfer” cannot be used with The contents of the “Memory Stick Macintosh. Duo” inserted in your camera appear. 2 Double-click [DCIM]. 3 Double-click the folder containing the desired image files. 4 Drag and drop the image files to the hard disk icon. The image files are copied to your hard disk. • See page 62 for details about the image file storage destinations and file names.,

Creating a Video CD using “ImageMixer”

You can create a Video CD using d Click . f Insert a blank CD-R into the “ImageMixer Ver.1.5 for Sony.” You can CD-R drive and click [OK]. play back created Video CDs on a Video The disc creation starts. CD-compatible DVD player, or on a computer using Video CD application • You cannot use CD-RW discs. software. • The CD-R drive is required to create a Video CD. a Start “ImageMixer.” b Click . The video CD creating mode turns on. For the Macintosh edition • Roxio-manufactured “Toast” (not c Drag & drop the desired file or You can preview the image. supplied) is required to create a Video CD. album to the menu screen. • The playback time of the movie file e Click . becomes shorter on the preview screen. The selected image is added to the The disc creating dialogue appears. menu screen. • This section describes the English screen.,

Troubleshooting

Troubleshooting

Troubleshooting

If you experience trouble with your camera, 2 Should your camera still not work 3 Should your camera still not work try the following solutions. properly, press the RESET button on the properly, consult your Sony dealer or 1 First check the items on the tables below. bottom of the camera using a fine-tipped local authorized Sony service facility. If code “C: : ” is displayed object, then turn on the power again. (All ss ss on the LCD screen, the self- the settings including date and time are diagnosis display function is cleared.) working (page 77). RESET button Batteries and power Symptom Cause Solution The battery remaining • You have used the camera in an extremely cold — indicator is incorrect, or location. sufficient battery remaining • The batteries are discharged. p Install charged batteries (page 10). indicator is displayed but • The battery contacts or the terminals on the p Wipe any dirt off from them with a dry cloth (page 11). the power runs out soon. battery/“Memory Stick Duo” cover are dirty. • The batteries are exhibiting the “memory effect” p To restore the batteries to their original condition, use them until (page 11). they are fully drained before recharging them. • The batteries are dead (page 84). p Replace the batteries with new ones. The battery life is short. • You are shooting/viewing images in an — extremely cold location. • The batteries are not charged enough. p Charge the batteries (page 10). • The batteries are dead (page 84). p Replace the batteries with new ones., Symptom Cause Solution You cannot turn on the • The batteries are not installed correctly. p Install the batteries correctly (page 12). camera. • The batteries are discharged. p Replace them with charged batteries (page 10). • The batteries are dead (page 84). p Replace the batteries with new ones. The power turns off • If you do not operate the camera for about three p Turn on the camera again (page 14). suddenly. minutes when using batteries, the camera turns off automatically to prevent wearing down the batteries (page 15). • The batteries are discharged. p Replace them with charged batteries (page 10). Shooting still images/movies Symptom Cause Solution The subject does not appear • The mode switch is set to . p Set the mode switch to or (pages 20 and 46). on the LCD screen. The image is out of focus. • The subject is too close. p Make sure to position the lens farther away from the subject than the minimum shooting distance of 10 cm (4 inches) when shooting (page 20). • When shooting still images, (Illumination p Cancel the Scene Selection function (page 29). snap mode), (Twilight mode), (Vivid nature mode), or (Active outdoor mode) is selected for the Scene Selection function. • You are shooting movies at a distance closer p Select the Focus preset function (page 30). than 1.0 m (3 feet 3 3/8 inches). • The Focus preset function is selected. p Set it to [AUTO] (page 31). The image is too dark. • The LCD screen is too dark. p Set [LCD LIGHT] to [ON] (pages 21 and 80). The image is too bright. • The LCD screen is too bright. p Set [LCD LIGHT] to [OFF] (pages 21 and 80). Vertical streaks appear • The smear phenomenon is occurring. p This is not a malfunction. when you are shooting a very bright subject., Troubleshooting Symptom Cause Solution Your camera cannot record • No “Memory Stick Duo” is inserted. p Insert a “Memory Stick Duo” (page 17). images. • The capacity of the “Memory Stick Duo” is p Delete the images saved in the “Memory Stick Duo” (page 50), insufficient. or format it (page 51). p Change the “Memory Stick Duo.” • You are using a “Memory Stick Duo” withapSet it to the recording position (page 83). write-protect switch, and the switch is set to LOCK. • You cannot shoot while the flash is charging. — • The mode switch is not set to when shooting p Set it to (page 20). a still image. • The mode switch is not set to when shooting p Set it to (page 46). a movie. The flash does not work. • The mode switch is set to or . p Set it to (page 20). • The flash is set to (No flash). p Set the flash to auto (no indicator), (Red-eye reduction) or (Forced flash) (page 23). • When shooting still images, either (Twilight p Set it to other modes (pages 18 and 29). mode) or (Vivid nature mode) is selected for the Scene Selection function, or the camera is in Burst mode. The eyes of the subject — p Set the flash mode to (Red-eye reduction) (page 23). come out red. The date and time are • The date and time are not set correctly. p Set the correct date and time (page 15). recorded incorrectly. When shooting a movie, the • The image looks like a single-frame advance p The recorded movie will be normal. image looks like a single- because of image data processing. frame advance., Viewing images Symptom Cause Solution Your camera cannot play • The mode switch is not set to . p Set it to (page 35). back images. • You have changed a folder or file name. p See page 63. • You cannot play back images processed on your — computer. • The camera is in USB mode. p Cancel the USB connection (pages 58 and 65). The image cannot be played — p See page 71. back on a computer. Your camera cannot • Enlarged playback is not available for files — perform enlarged playback. created or processed using other devices. You cannot display a print • You cannot display print (DPOF) marks on — (DPOF) mark. movies. Deleting images Symptom Cause Solution Your camera cannot delete • You are using a “Memory Stick Duo” withapSet it to the recording position (page 83). an image. write-protect switch, and the switch is set to LOCK. You have deleted an image • Once you have deleted an image, you cannot p When you are using a “Memory Stick Duo” with a write-protect by mistake. restore it. switch, the switch will prevent you from deleting images by mistake (page 83). Computers Symptom Cause Solution You do not know if the OS of — p Check “Recommended computer environment” (pages 53 and your computer is 64). compatible. You cannot install the USB — p In Windows 2000, log on as Administrator (authorized driver. Administrator) (page 53)., Troubleshooting Symptom Cause Solution Your computer does not • You are not using the supplied USB cable. p Use the supplied USB cable (page 57). recognize your camera. • The USB cable is not connected firmly. p Disconnect the USB cable, and connect it again firmly. Make sure that “USB MODE” is displayed on the LCD screen (pages 57 and 65). • [USB] is set to [PTP] under [ ] in the menu p Set it to [NORMAL] (page 80). settings. • The USB connectors on your computer are p Disconnect the USB cables except for the ones connected to the connected to other equipment besides the keyboard, the mouse, and your camera. keyboard, the mouse, and your camera. • The camera is not connected directly to your p Connect the camera directly to your computer without passing computer. through a hub or other device. • The USB driver is not installed. p Install the USB driver (page 54). • The camera was connected to a computer with p Delete the device which is not recognized, then install the USB the USB cable before installing the USB driver, driver (pages 54 and 60). so the device was not recognized by the computer. You cannot turn on the • The camera is not connected directly to your p Connect the camera directly to your computer without passing camera during USB computer. through a hub or other device. connection. • No “Memory Stick Duo” is inserted. p Insert a “Memory Stick Duo” (page 17). You cannot copy images. • The camera is not correctly connected to your p Connect the camera and your computer correctly using the computer. supplied USB cable (page 57). • You are not using the correct copy procedure for p Follow the designated copy procedure for your OS (pages 58, 59 your OS. and 65). — p If you are using the “Image Transfer” software, see page 58. — p If you are using the “ImageMixer Ver.1.5 for Sony” application software, click on HELP. After making a USB — p Select [Launch Image Transfer automatically when the camera, connection, “Image etc., is connected.] at [Basic] setting (page 59). Transfer” does not — p Make a USB connection when the computer is turned on automatically start. (page 57). The image cannot be played — p If you are using the “ImageMixer Ver.1.5 for Sony” application back on a computer. software, click on HELP. — p Consult the computer or software manufacturer., Symptom Cause Solution The image is interrupted by • You are playing back the movie directly from p Copy the movie to the hard disk of your computer and then play noise when you view a the “Memory Stick Duo.” back the movie from the hard disk (pages 58, 59 and 65). movie on a computer. You cannot print an image. — p Check the printer settings. — p Click on HELP for the “ImageMixer Ver.1.5 for Sony” application software. An error message appears • The computer display is not set correctly. p Set the computer display as follows: when you set the supplied Windows: 800 × 600 dots or more CD-ROM in your computer. High Color (16-bit color, 65,000 colors) or more Macintosh: 800 × 600 dots or more 32,000-color or more “Memory Stick Duo” Symptom Cause Solution You cannot insert a • You are inserting the “Memory Stick Duo” p Insert it from the right side (page 17). “Memory Stick Duo.” backwards. • The “Memory Stick Duo” has been inserted into p Insert it directly into the camera. a Memory Stick Duo adaptor. You cannot record on a • You are using a “Memory Stick Duo” withapSet it to the recording position (page 83). “Memory Stick Duo.” write-protect switch, and the switch is set to LOCK. • The “Memory Stick Duo” is full. p Delete unnecessary images (page 50). You cannot format a • You are using a “Memory Stick Duo” withapSet it to the recording position (page 83). “Memory Stick Duo.” write-protect switch, and the switch is set to LOCK. You have formatted a • When you format a “Memory Stick Duo,” all p When you are using a “Memory Stick Duo” with a write-protect “Memory Stick Duo” by data in the “Memory Stick Duo,” including switch, we recommend that you set the write-protect switch to mistake. images that were write-protected by another LOCK to prevent accidental erasure (page 83). device, will be permanently erased and cannot be restored., Troubleshooting PictBridge compliant printer Symptom Cause Solution You cannot connect your • The printer is not PictBridge compliant. p Ask the printer manufacturer if the printer is PictBridge camera to the printer. compliant. • The printer is not ready to be connected. p Confirm that the printer is turned on and is ready to be connected. • Your camera is not connected to the printer p When the preparations needed to make the connection between correctly. the camera and the printer are finished, make the connection (pages 42 and 43). You cannot print. • Your camera is not connected to the printer. p Confirm that your camera is correctly connected to the printer using the USB cable. • The power of the printer is off. p Turn the printer on. For details, see the operation manual supplied with the printer. • You cannot print a movie. — • You may not be able to print a still image — recorded using other devices or an image processed using a computer. Printing was stopped. • You disconnected the USB cable before the — mark disappeared. You cannot attach a date to • Your printer does not support this function. p Ask the printer manufacturer if the printer supports this an image. function. “- - -” is printed on an • Printable date information has not been input to p If printable date information has not been input, you cannot image instead of a date. the image file. print out a date. To print without date information, set [INSERT DATE] to [OFF] and print the image (page 45)., Others Symptom Cause Solution Your camera does not work. • The battery level is low. (The E indicator p Charge the batteries (page 10). appears.) • The USB cable is connected. p Disconnect the USB cable (pages 58 and 65). The power is on, but the • The built-in microcomputer is not working p Remove the batteries, then install them again after about one camera does not work. properly. minute and turn on the camera. If the functions still do not work, press the RESET button located on the bottom of the camera using a fine-tipped object, then turn the power on again (page 67). (If you press the RESET button, all settings including the date and time are cleared.) You cannot identify an — p Check the indicator (pages 87 and 88). indicator on the LCD screen. The lens gets fogged. • Moisture condensation has occurred. p Turn off the camera and leave it for about an hour at the room temperature for the moisture to evaporate before use (page 81)., Troubleshooting

Warnings and messages

The following messages appear on the LCD screen. Message Meaning/Corrective Action NO MEMORY STICK • Insert a “Memory Stick Duo” (page 17). SYSTEM ERROR • Turn the power off and on again (page 14). MEMORY STICK ERROR • The inserted “Memory Stick Duo” cannot be used in your camera (page 83). • The “Memory Stick Duo” is damaged, or the terminal section of the “Memory Stick Duo” is dirty. • Insert the “Memory Stick Duo” correctly (page 17). MEMORY STICK TYPE ERROR • The inserted “Memory Stick Duo” cannot be used in your camera (page 83). FORMAT ERROR • The “Memory Stick Duo” format failed. Format the “Memory Stick Duo” again (page 51). MEMORY STICK LOCKED • You are using a “Memory Stick Duo” with a write-protect switch, and the switch is set to LOCK. Set it to the recording position (page 83). NO MEMORY SPACE • The capacity of the “Memory Stick Duo” is insufficient. You cannot record images. Delete unnecessary images (page 50). READ ONLY MEMORY • You cannot record or delete an image saved on this type of “Memory Stick Duo” using your camera. NO FILE IN THIS FOLDER • No images have been recorded in this folder. FOLDER ERROR • A folder with the same first three digits number already exists in the “Memory Stick Duo.” (For example: 123MSDCF and 123ABCDE) Select other folders, or create a new folder. CANNOT CREATE MORE • The folder whose first three digits of the name is “999” exists in the “Memory Stick Duo.” You cannot create FOLDERS any folders. CANNOT RECORD • The camera cannot record images in the selected folder. Select a different folder (page 26). FILE ERROR • An error occurred while playing back the image. FILE PROTECT • The image is write-protected by another device. Release the protection by another device. IMAGE SIZE OVER • You are attempting to play back an image of a size that cannot be played back on your camera. • You are using the PictBridge function to print an image shot with another camera. INVALID OPERATION • You are attempting to assign the print (DPOF) mark to a file that was created by another device. • The battery level is low or zero. Charge the batteries (page 10). Depending on the conditions of use, the indicator may flash even though there are still approximately 5 to 10 minutes of remaining battery time left., Message Meaning/Corrective Action ENLARGED PLAYBACK ERROR • You are attempting to perform enlarged playback for a file created using other devices. • Enlarged playback is not available for images processed using a computer. • An error occurred while your camera was performing enlarged playback. LENS COVER CLOSED • The lens cover is closed when the mode switch is set to or . PRINTER IS BUSY • The printer cannot accept a job because it is currently printing. Check the printer. PAPER ERROR • A paper-related error occurred with the printer, for example, it has run out of paper or has a paper jam. Check the printer. INK ERROR • An ink-related error occurred with the printer. Check the printer. PRINTER ERROR • A printer error occurred. Check the printer, or make sure the image file you want to print is not corrupted. • Data is being transferred to the printer. Do not disconnect the USB cable.,

Self-diagnosis display

— If a code starting with an alphabet letter appears Your camera has a self-diagnosis display. Code Cause Countermeasure Troubleshooting This function displays the camera condition on the LCD screen with a combination of a letter and four numerical digits. If this occurs, check the following code chart and attempt the corresponding corrective actions. The last two digits (indicated by ss) will differ depending on the state of the camera. C:32:ss Self-diagnosis display C:32:ss There is trouble with your • Turn the power off and on again (page 14). camera’s hardware. C:13:ss The camera cannot read or write • Re-insert the “Memory Stick Duo” several data on the “Memory Stick Duo.” times. An unformatted “Memory Stick • Format the “Memory Stick Duo” (page 51). Duo” is inserted. The inserted “Memory Stick • Insert a new “Memory Stick Duo” (page 17). Duo” cannot be used with your camera, or the data is damaged. E:61:ss A camera malfunction that you • Press the RESET button (page 67) located on E:91:ss cannot reverse has occurred. the bottom of the camera, then turn the power on again. If you are unable to solve the problem even after trying the corrective actions a few times, repairs may be necessary. Contact your Sony dealer or local authorized Sony service facility and inform them of the 5- digit code. Example: E:61:10, Additional information

Menu items

Menu items that can be modified differ depending on the position of the mode switch. The LCD screen shows only the items you can operate at the moment. Factory settings are indicated with x.

When the mode switch is set to (when [ ] is selected in the menu settings)

Item Setting Description SIZE·BURST x2M / VGA / 2M BURST / Selects the image size when shooting still images (pages 18 and 31). VGA BURST FOCUS xAUTO / 0.2 m / 0.5 m / Selects the auto focus method or sets the focus preset distance (page 30). 1.0 m / SELFTIMER ON / xOFF Sets the self-timer (page 22). WHITE BAL xAUTO / / / / Sets the white balance (page 33).

When the mode switch is set to (when [ ] is selected in the menu settings)

Item Setting Description SIZE x320×240 / 160×112 Selects the image size to be used when shooting a movie (page 46). FOCUS xAUTO / 0.2 m / 0.5 m / Selects the auto focus method or sets the focus preset distance (page 30). 1.0 m / SELFTIMER ON / xOFF Sets the self-timer (page 22). WHITE BAL xAUTO / / / / Sets the white balance (page 33)., Additional information

When the mode switch is set to or (when [ ] is selected in the menu settings)

Item Setting Description FORMAT OK / CANCEL Formats the “Memory Stick Duo.” When you format a “Memory Stick Duo,” note that all data in the “Memory Stick Duo,” including images that were write- protected by another device, will be permanently erased (page 51). CREATE FOLDER OK / CANCEL Creates a folder for recording images (page 25). CHANGE FOLDER OK / CANCEL Changes a folder for recording images (page 26).

When the mode switch is set to (when [ ] is selected in the menu settings)

Item Setting Description DELETE OK / CANCEL Deletes the displayed image (page 50). DELETE IN OK / CANCEL Deletes all images in the folder (page 50).

FOLDER

INDEX / SINGLE — Switches between four-image display and single image display (page 35). DPOF ON / xOFF Marks/unmarks the print (DPOF) mark on still images you want to print (page 40).

When the mode switch is set to (when [ ] is selected in the menu settings)

Item Setting Description FORMAT OK / CANCEL Formats the “Memory Stick Duo.” When you format a “Memory Stick Duo,” note that all data in the “Memory Stick Duo,” including images that were write- protected by another device, will be permanently erased (page 51). PRINT — Connects the camera to a PictBridge compliant printer, and then prints the image (page 42). CHANGE FOLDER* OK / CANCEL Selects the folder containing the images you want to play back (page 37). * You can also select this item when the camera is connected to a PictBridge compliant printer. You can change a folder containing the images you want to print (page 45).,

When [ ] is selected in the menu settings during a connection with a PictBridge compliant printer

Item Setting Description PRINT 1 PAGE OK / CANCEL Connects the camera to a PictBridge compliant printer, and then print the image (page 44). INSERT DATE — Attaches a date to an image to be printed (page 45).

The following menus are available no matter what position the mode switch is in. When [ ] is selected in the menu settings

Item Setting Description LCD LIGHT xON / OFF Selects the brightness of the LCD screen. Selecting [ON] makes the screen bright and easy to see, but also uses up the battery charge faster (page 21). DISPLAY xON – Displays all indicators. OFF – Displays warning messages, etc.

When [ ] is selected in the menu settings

Item Setting Description CLOCK SET DATE NOTATION – Sets the date notation (page 15). x[Y/M/D] / [M/D/Y] / [D/M/Y] DATE&TIME SET – Sets the date and time (page 15). BEEP xON – Turns on the beep when you press the control button/shutter button. SHUTTER – Turns on the beep when you press the shutter button. OFF – Turns off the beep. USB xNORMAL / PTP Switches the USB mode (pages 53 and 64). A LANGUAGE — Displays the menu items, warnings and messages in selected language., Additional information

Precautions Do not leave the camera in the On cleaning Note on operating temperature

following places Cleaning the LCD screen Your camera is designed for use between • In extremely hot place, such as in a car Wipe the screen surface with an LCD the temperatures of 0°C and 40°C (32°F and parked in the sun. The camera body may cleaning kit (not supplied) to remove 104°F). Shooting in extremely cold or hot become deformed or this may cause a fingerprints, dust, etc. places that exceed this range is not malfunction. recommended. Cleaning the lens • Under direct sunlight or near a heater. Wipe the lens with a soft cloth to remove The camera body may become deformed On moisture condensationfingerprints, dust, etc. or this may cause a malfunction. If the camera is brought directly from a cold • On rocking vibration. Cleaning the camera surface to a warm location, or is placed in a very • Near strong magnetic place. Clean the camera surface with a soft cloth damp room, moisture may condense inside • In sandy or dusty places, be careful not to slightly moistened with water, then wipe or outside the camera. This moisture let sand or dust get into the camera. This the surface with a dry cloth. Do not use the condensation may cause a malfunction of may cause the camera to malfunction, and following as this may damage the finish or the camera. in some cases this malfunction cannot be the casing. Moisture condensation occurs easily repaired. • Thinner when: • Benzine • The camera is brought from a cold • Alcohol location such as a ski slope into a warmly • Diposable cloth heated room. • Volatile insecticide • The camera is taken from an air- • Contact with rubber or vinyl for a long conditioned room or car interior to the hot time outdoors, etc., How to prevent moisture condensation On internal rechargeable • This internal rechargeable button battery is When bringing the camera from a cold button battery located on the bottom of the camera. Once you place to a warm place, seal the camera in a remove the rechargeable button battery cover This camera has an internal rechargeable and the rechargeable button battery from the plastic bag and allow it to adapt to button battery for maintaining the date and camera, you cannot put them back into the conditions at the new location over a period time and other settings regardless of camera. Do not remove them until the time you of time (about an hour). whether the power is on or off. discard the camera. If moisture condensation occurs This rechargeable button battery is Turn off the camera and wait about an hour continually charged as long as you are using for the moisture to evaporate. Note that if the camera. However, if you use the camera you attempt to shoot with moisture for only short periods it discharges remaining inside the lens, you will be gradually, and if you do not use the camera unable to record clear images. at all for about one month it becomes completely discharged. In this case, be sure to charge this rechargeable button battery before using the camera. However, even if this rechargeable button battery is not charged, you can still use the camera as long as you do not record the date and time. Charging method Install charged size AAA Nickel-Metal Hydride batteries, and leave the camera for 24 hours or more with the power off., Additional information

On “Memory Stick”

“Memory Stick” is a compact, portable IC • “Memory Stick Duo” formatted with a – When the “Memory Stick Duo” is removed recording medium with a data capacity that computer is not guaranteed to operate with this or the camera is turned off during read or exceeds the capacity of a floppy disk. camera. write operation • The speed at which data is read or written – When the “Memory Stick Duo” is used in The types of “Memory Stick” that can be varies depending on the combination of locations subject to static electricity or used with this camera are listed in the table “Memory Stick Duo” and the device you are electrical noise below. However, proper operation cannot using. • We recommend backing up important data. be guaranteed for all “Memory Stick” • Do not press down hard when you write down functions. Notes on using “Memory Stick on the memo area. • Do not attach a label on the “Memory Stick Recording/ Duo”“Memory Stick” type Duo” itself nor on a Memory Stick Duo Playback • You cannot record, edit, or delete images if you adaptor. 3) Memory Stick × slide the write-protect switch to LOCK with a • When you carry or store the “Memory Stick fine-tipped object. Duo,” put it in the case supplied with it. Memory Stick Duo a • Do not touch the terminal of the “Memory Terminal Memory Stick Duo Stick Duo” with your hand or a metal object. (compatible with MagicGate/ 2)a2) • Do not strike, bend or drop the “Memory Stick high-speed data transfer)1) Duo.” MagicGate Memory Stick × Write-protect • Do not disassemble or modify the “Memory switch3) Stick Duo.” MagicGate Memory Stick • Do not expose the “Memory Stick Duo” to a Duo1) Memo area water. • Do not leave the “Memory Stick Duo” within Memory Stick PRO × The position or the shape of the write-protect the reach of small children. Memory Stick PRO Duo1) 2) 2) switch 3) a may differ depending on the “Memory They might accidentally swallow it. Stick Duo” you use. • Do not use or keep the “Memory Stick Duo” 1) “MagicGate Memory Stick Duo” and “Memory 3) The “Memory Stick Duo” supplied with this under the following conditions: Stick PRO Duo” are equipped with MagicGate camera does not have a write-protect switch. – High temperature locations such as the hot functions. MagicGate is copyright protection When using this type of “Memory Stick Duo,” interior of a car parked in direct sunlight technology that uses encryption technology. be careful not to edit or delete data by mistake. – Locations exposed to direct sunlight Data recording/playback that requires • Do not remove the “Memory Stick Duo” while – Humid locations or locations with corrosive MagicGate functions cannot be performed with reading or writing data. substances this camera. • Data may be corrupted in the following cases. 2) This camera is not compatible with high-speed data transfer using a parallel interface.,

Notes on using a Memory Stick Duo adaptor (supplied)

• When using a “Memory Stick Duo” with a “Memory Stick” compliant device, be sure to insert the “Memory Stick Duo” into a Memory Stick Duo adaptor. If you insert a “Memory Stick Duo” into a “Memory Stick” compliant device without a Memory Stick Duo adaptor, you might not be able to remove it from the device. • When inserting a “Memory Stick Duo” into a Memory Stick Duo adaptor, make sure the “Memory Stick Duo” is inserted facing in the correct direction, then insert it all the way in. Incorrect insertion may result in a malfunction. • When using a “Memory Stick Duo” inserted into a Memory Stick Duo adaptor with a “Memory Stick” compliant device, make sure that the “Memory Stick Duo” is inserted facing the correct direction. Note that improper use may damage the equipment. • Do not insert a Memory Stick Duo adaptor without a “Memory Stick Duo” attached. Doing so may result in malfunction of the unit.

Note on using “Memory Stick PRO Duo” (not supplied)

“Memory Stick PRO Duo” with a capacity up to 512MB have been confirmed to operate properly with this camera.

On Nickel-Metal Hydride batteries Effective use of the battery Battery life

• At the time of purchase, or if the Nickel- • The battery life is limited. The battery Metal Hydride batteries have not been capacity decreases little by little as you used for a long time, they may not be use it more and more, and as time passes. sufficiently charged. We recommend that When the battery operating time seems to you charge the batteries before you use have been considerably shortened, a them. probable cause is that the batteries have • Battery performance decreases in low- reached the end of their life. temperature surroundings, and the battery • The battery life varies depending on life is shortened under such storage, operating conditions, and circumstances. To use the battery longer, environment, and is different for each we recommend you keep the battery in its battery. case in a pocket close to your body to warm it, and insert it in your camera just before you start shooting. • If you set [LCD LIGHT] to [OFF], the battery will run for a longer amount of time. • If you shoot a lot using the flash, the battery power will be used up faster. • We recommend having spare batteries handy for two or three times the expected shooting time, and try test shooting before actually using the camera. • Do not expose the battery to water. The battery is not water-resistant., Additional information

On the battery charger

• Do not charge any other batteries except • When the CHARGE lamp flashes, this Sony Nickel-Metal Hydride batteries in may indicate a battery error or that the battery charger supplied with your batteries other than the specified type camera. If you try to charge any other have been inserted. Check that the type of battery (e.g., manganese batteries, batteries are the specified type. If the alkaline dry cells, primary lithium specified type of batteries have been batteries, or Ni-Cd batteries) than the installed, remove all the batteries, replace batteries specified, those batteries may them with new ones or another ones and leak, overheat, or explode, causing the check if the battery charger operates danger of burns or other injuries. correctly. If the battery charger operates • Do not charge fully charged Nickel- correctly, a battery error may have Metal Hydride batteries again. occurred. Otherwise, there is a danger of leaks, excessive heat, explosions, or electric shock. • When charging a high capacity battery other than the supplied battery using the supplied battery charger, the full capacity of the battery may not be available.,

Specifications

xCamera [LCD screen] Output rating [System] LCD panel used DC OUT AA: 1.4 V, 2.5 cm (1.0 type) TFT drive 400 mA × 2 Image device AAA: 1.4 V, 6.72 mm (1/2.7 type) color CCD Total number of dots Primary color filter 64 460 (293×220) dots 160 mA × 2 Operating temperature range Total pixels number of camera 0°C to +40°C (+32°F to +104°F) Approx. 2 112 000 pixels [Power, general] Storage temperature range Effective pixels number of camera Power AAA Nickel-Metal Hydride –20°C to +60°C (–4°F to +140°F) Approx. 2 020 000 pixels batteries (2) 2.4 V Dimensions Lens Single focal lens5V(from USB cable) Approx. 71 × 30 × 91 mm f = 5.0 mm (7/32 inches) Power consumption (when shooting) (2 7/8 × 1 3/16 × 3 5/8 inches) (35 mm camera conversion: 33 mm 1.21 W (W/H/D) (1 5/16 inches)) Operating temperature range Mass Approx. 90 g (3 oz)F2.8 0°C to +40°C (+32°F to +104°F) Exposure control Automatic, Scene Selection Storage temperature range Accessories (5 modes) –20°C to +60°C (–4°F to +140°F) White Balance Dimensions • HR11/45: HR03 (Size AAA) Ni-MH batteries (2) Automatic, Daylight, Cloudy, 82.8 × 39.0 × 26.0 mm • Battery case (1) Fluorescent, Incandescent (3 3/8 × 1 9/16 × 1 1/16 inches) • BC-CS2A/CS2B Ni-MH battery charger (1) (W/H/D, protruding sections not Data formats • Power cord (mains lead) (1)included) Still images: DCF compliant • USB cable (1) (Exif Ver. 2.2 JPEG compliant), Mass Approx. 114 g (4.0 oz) (two batteries, “Memory Stick Duo,” and • Neck strap (1)DPOF compatible • “Memory Stick Duo” (8MB) (1) Movies: MPEG1 compliant (without neck strap included) audio) Exif Print Compatible • Memory Stick Duo Adaptor (1) Recording media PRINT Image Matching II Compatible • CD-ROM (USB driver SPVD-013) (1) “Memory Stick Duo” PictBridge Compatible • Operating instructions (1) Flash Recommended distance: 0.5 m to 1.8 m (1 foot 7 3/4 inches to 5 feet Design and specifications are subject to change 10 3/4 inches) xBC-CS2A/CS2B Ni-MH without notice. battery charger [Output connector] Input rating 100 – 240 V AC, 50/60 Hz, 3 W USB jack mini-B, Additional information

LCD screen displays

See the pages in parentheses for details.

When shooting still images When shooting movies

7168272M 101 9 320 STBY 101 8 q; 0:38/ 12:55 C:32: 9ss 3 C:32:ss qa 5 qs406qd 5 qa A Image size indicator (18, 31) A Recording mode indicator (46) B Battery remaining indicator (13) B Battery remaining indicator (13) C Flash mode indicator (23)/ C Focus preset indicator (30) Red-eye reduction indicator (23) D White Balance indicator (33) D Focus preset indicator (30) E Low battery warning indicator E White Balance indicator (33) (75) F Scene Selection indicator (28) F Status indicator (46) G AE/AF lock indicator (20) G Recording folder indicator (25) H Recording folder indicator (25) H Remaining “Memory Stick” I Remaining “Memory Stick” capacity indicator capacity indicator I Shooting time/Recording time J Remaining number of recordable [maximum recordable time] images indicator (19) indicator (48) K Self-diagnosis display (77) J Self-diagnosis display (77) Page numbers in parentheses indicate the L Self-timer indicator (22) K Self-timer indicator (22) location of additional important M Low battery warning indicator (75) information.,

When playing back still images When playing back moving

6 images17qa qd 2 2M 101 12 8 320 101 8 qf 2.5 /12 0:12 qg 3 qh 4 9101-0012 qs 101_00085749:30AM q; 20037410:30AM qj A Image size indicator (18, 31) K Recording mode indicator (49) B Print (DPOF) mark indicator (40) L Folder_file name (62) C PictBridge connecting indicator M Playback folder indicator (37) (43) N Image number D Enlarged playback/enlargement O Counter level indicator (39) P Change folder indicator (38) E Folder-file name (62) Q Recording date/time of the F Not disconnect USB cable playback image indicator (45) G Playback folder indicator (37) H Image number/Number of images recorded in selected folder I Change folder indicator (38) Page numbers in parentheses indicate the J Recording date/time of the playback image location of additional important information.,

Index

Index

Index E LCD light ... 21

Enlarged playback ... 39 EXEC ... 15, 39 M

A Exif ... 86 Memory Stick ... 17, 83

Access lamp ...17 Memory Stick Duo ... 17, 83 AE/AF lock indicator ...20 F MENU ... 15 Auto Focus ...20 File Menu settings ... 78 Auto power-off function ...15 file names ... 62 Mode switch ... 8 image file storage destinations ... 62 Moisture condensation ... 81

B Flash Movie

Battery Red-eye reduction ... 23, 24, 28 shooting movies ... 46 Battery life ...13 selecting a flash mode ... 23 shooting time ... 13, 48 charging time ...11 Focusing viewing images on your computer ... 61, 65 preparing batteries ...10 Focus preset ... 30 viewing movies on the LCD screen ... 49 remaining indicator ...13 shooting (using auto adjustment mode) ... 20 MPG ... 62 Beep/shutter sound ...80 Folder Burst ...31 folder for playback ... 37 N recording folder ... 26 Nickel-Metal Hydride batteries ... 10, 84

C Format ... 51 Number of images that can be saved or

CD-ROM ...53 shooting time ... 13, 19, 48 Changing the recording folder ...26 I Charging Image file storage destinations ... 62 P charging the batteries ...10 Image size ... 18, 19 PictBridge ... 42 charging time ...11 Image Transfer ... 55 POWER ... 14, 15 Cleaning ...81 ImageMixer ... 56 Power Clock set ...15 Index screen ... 36 batteries ... 10 Control buttons ...9, 15 inserting the batteries ... 12 Copying images to your computer ...53, 59, 65 J ON/OFF ... 14 Creating a new folder ...25 JPG ... 62 Precautions ... 81 Print (DPOF) mark ... 40

D L PTP ... 53, 64, 80

Deleting images ...50 LCD screen DPOF ...40 DISPLAY ... 22, 87,

R V

Red-eye reduction ... 23, 24, 28 Video CD ... 66 RESET button ... 67, 77 Viewing images on the LCD screen ... 35, 49 Viewing images on your computer ... 61, 65

S

SCENE ... 29 W Scene Selection (SCENE) ... 28 Warnings and messages ... 75 Self-diagnosis display ... 77 White Balance ... 33 Self-timer ... 22 Setting Z date and time ... 15 Zoom image size ... 18 Enlarged playback ... 39 menu items ... 78 Shooting mode auto adjustment mode ... 20 Burst ... 31 movie ... 46 Single image screen ... 35 Still image deleting ... 50 shooting ... 20 viewing images on the LCD screen ... 35 viewing images on your computer ... 61, 65

U USB

USB Bus Powered ... 53, 64 USB cable ... 57, 58, 65 USB connection ... 57 USB driver ... 54 Using your camera abroad ... 14, Printed on 100% recycled paper using VOC (Volatile Organic Compound)-free vegetable oil based ink. Additional information on this product and answers to frequently asked questions can be found at our Customer Support Website. Sony Corporation Printed in Japan308489211,

Reverse 987628141.pdf Revision History

Ver. Date History Contents S.M. Rev. issued 1.0 2003.10 Official Release — —]
15

Similar documents

For the Customers in the U.S.A. Notice for the customers in the Notice
DSC-U40 SERVICE MANUAL LEVEL 1 US Model Ver 1.1 2004.03 Canadian Model Revision History AEP Model UK Model E Model Hong Kong Model Australian Model Chinese Model Korea Model Tourist Model Photo: Silver Japanese Model Link SPECIFICATIONS SELF DIAGNOSIS FUNCTION ORNAMENTAL PARTS • INSTRUCTION MANUAL i
For the Customers in the U.S.A. Notice for the customers in the Notice
DSC-U50 SERVICE MANUAL LEVEL 1 US Model Ver 1.0 2003. 08 Canadian Model Revision History AEP Model UK Model E Model Hong Kong Model Australian Model Chinese Model Korea Model Tourist Model Photo: Orange Japanese Model Link SPECIFICATIONS SELF DIAGNOSIS FUNCTION ORNAMENTAL PARTS • INSTRUCTION MANUAL
DSC-V1 SERVICE MANUAL LEVEL 2 US Model Canadian Model UK Model E Model Hong Kong Model Australian Model Chinese Model Korea Model Tourist Model Japanese Model
DSC-V1 SERVICE MANUAL LEVEL 2 US Model Ver 1.0 2003. 05 Canadian Model Revision History AEP Model UK Model E Model Hong Kong Model Australian Model Chinese Model Korea Model Tourist Model Japanese Model Link SPECIFICATIONS BLOCK DIAGRAMS PRINTED WIRING BOARDS SERVICE NOTE FRAME SCHEMATIC DIAGRAMS RE
DSC-V1 SERVICE MANUAL LEVEL 1 US Model Ver 1.0 2003. 05 Canadian Model Revision History AEP Model UK Model E Model Hong Kong Model Australian Model Chinese Model
DSC-V1 SERVICE MANUAL LEVEL 1 US Model Ver 1.0 2003. 05 Canadian Model Revision History AEP Model UK Model E Model Hong Kong Model Australian Model Chinese Model Korea Model Tourist Model Japanese Model Link SPECIFICATIONS SELF DIAGNOSIS FUNCTION ORNAMENTAL PARTS • INSTRUCTION MANUAL is shown at the
DSC-V1 SERVICE MANUAL LEVEL 2 US Model Canadian Model UK Model E Model Hong Kong Model Australian Model Chinese Model Korea Model Tourist Model Japanese Model
DSC-V1 SERVICE MANUAL LEVEL 2 US Model Ver 1.0 2003. 05 Canadian Model Revision History AEP Model UK Model E Model Hong Kong Model Australian Model Chinese Model Korea Model Tourist Model Japanese Model Link SPECIFICATIONS BLOCK DIAGRAMS PRINTED WIRING BOARDS SERVICE NOTE FRAME SCHEMATIC DIAGRAMS RE
DSC-V1 SERVICE MANUAL LEVEL 2 US Model Canadian Model UK Model E Model Hong Kong Model Australian Model Chinese Model Korea Model Tourist Model Japanese Model
DSC-V1 SERVICE MANUAL LEVEL 2 US Model Ver 1.1 2004. 09 Canadian Model Revision History AEP Model UK Model E Model Hong Kong Model Australian Model Chinese Model Korea Model Tourist Model Japanese Model Link SPECIFICATIONS BLOCK DIAGRAMS PRINTED WIRING BOARDS SERVICE NOTE FRAME SCHEMATIC DIAGRAMS RE
DSC-V1 SERVICE MANUAL LEVEL 2 US Model Canadian Model UK Model E Model Hong Kong Model Australian Model Chinese Model Korea Model Tourist Model Japanese Model
DSC-V1 SERVICE MANUAL LEVEL 2 US Model Ver 1.2 2004.10 Canadian Model Revision History AEP Model UK Model E Model Hong Kong Model Australian Model Chinese Model Korea Model Tourist Model Japanese Model Link SPECIFICATIONS BLOCK DIAGRAMS PRINTED WIRING BOARDS SERVICE NOTE FRAME SCHEMATIC DIAGRAMS REP
SPECIFICATIONS Camera Power consumption (during shooting with the
DSC-W100 SERVICE MANUAL LEVEL 2 US Model Ver 1.0 2006.03 Canadian Model Revision History AEP Model UK Model How to use Acrobat Reader E Model Australian Model Hong Kong Model Internal memory Chinese Model ON BOARD Korea Model Brazilian Model Photo: Silver Tourist Model Link SPECIFICATIONS BLOCK DIAG
SPECIFICATIONS Camera Power consumption (during shooting with the
DSC-W100 SERVICE MANUAL LEVEL 2 US Model Ver. 1.3 2007.04 Canadian Model Revision History AEP Model UK Model How to use Acrobat Reader E Model Australian Model Hong Kong Model Internal memory Chinese Model ON BOARD Korea Model Brazilian Model Photo: Silver Tourist Model Link SPECIFICATIONS BLOCK DIA
• Addition of Argentine Model (W1)
DSC-W1/W12 SERVICE MANUAL LEVEL 1 DSC-W1 Ver 1.1 2004.05 US Model Canadian Model Revision History Hong Kong Model Australian Model Argentine Model Chinese Model Brazilian Model Tourist Model Japanese Model DSC-W1/W12 AEP Model UK Model E Model Korea Model Photo: DSC-W1/Silver Link SPECIFICATIONS SEL
• Addition of Argentine Model (W1)
DSC-W1/W12 SERVICE MANUAL LEVEL 1 DSC-W1 Ver 1.2 2004.08 US Model Canadian Model Revision History Hong Kong Model Australian Model Argentine Model Brazilian Model Tourist Model Japanese Model DSC-W1/W12 AEP Model UK Model E Model Chinese Model Korea Model Photo: DSC-W1/Silver Link SPECIFICATIONS SEL
Model information table
DSC-W30/W40 SERVICE MANUAL LEVEL 3 US Model Ver 1.0 2006.01 Canadian Model Revision History AEP Model UK Model E Model How to use Acrobat Reader Australian Model Hong Kong Model Chinese Model Internal memory Korea Model ON BOARD Argentine Model Brazilian Model Japanese Model Tourist Model Photo: DSC
SPECIFICATIONS Camera [LCD screen] BC-CSG battery charger
DSC-W30/W40 SERVICE MANUAL LEVEL 2 US Model Ver 1.0 2006.01 Canadian Model Revision History AEP Model UK Model E Model How to use Acrobat Reader Australian Model Hong Kong Model Chinese Model Internal memory Korea Model ON BOARD Argentine Model Brazilian Model Japanese Model Tourist Model Photo: DSC
SPECIFICATIONS Camera [LCD screen] BC-CSG battery charger
DSC-W30/W40 SERVICE MANUAL LEVEL 2 US Model Ver 1.1 2006.07 Canadian Model Revision History AEP Model UK Model E Model How to use Acrobat Reader Australian Model Hong Kong Model Chinese Model Internal memory Korea Model ON BOARD Argentine Model Brazilian Model Japanese Model Tourist Model Photo: DSC
SPECIFICATIONS Camera [Power, general]
DSC-W35 SERVICE MANUAL LEVEL 2 US Model Ver 1.1 2007.03 Canadian Model Revision History AEP Model UK Model How to use E Model Acrobat Reader Australian Model Hong Kong Model Internal memory Chinese Model ON BOARD Korea Model Argentine Model Brazilian Model Japanese Model Link SPECIFICATIONS BLOCK DI
CAUTION Danger of explosion if battery is incorrectly replaced.
DSC-W50 SERVICE MANUAL LEVEL 3 US Model Ver 1.0 2006.01 Canadian Model Revision History AEP Model UK Model How to use Acrobat Reader E Model Australian Model Hong Kong Model Internal memory Chinese Model ON BOARD Korea Model Argentine Model Photo: Silver Tourist Model Link SERVICE NOTE PRINTED WIRIN
SPECIFICATIONS Camera [LCD screen] BC-CSG battery charger
DSC-W50 SERVICE MANUAL LEVEL 2 US Model Ver 1.0 2006.01 Canadian Model Revision History AEP Model UK Model How to use Acrobat Reader E Model Australian Model Hong Kong Model Internal memory Chinese Model ON BOARD Korea Model Argentine Model Photo: Silver Tourist Model Link SPECIFICATIONS BLOCK DIAGR
SPECIFICATIONS Camera [Power, general]
DSC-W55 SERVICE MANUAL LEVEL 2 US Model Ver 1.1 2007.03 Canadian Model Revision History AEP Model UK Model How to use E Model Acrobat Reader Australian Model Hong Kong Model Internal memory Chinese Model ON BOARD Korea Model Argentine Model Brazilian Model Photo: Silver Tourist Model Link SPECIFICAT
SPECIFICATIONS Camera [Input and Output connectors] BC-CS2A/CS2B Ni-MH battery charger
DSC-W5/W7/W15/W17 SERVICE MANUAL LEVEL 2 DSC-W5/W7 Ver 1.0 2005.01 US ModelCanadian Model Argentine Model Revision History Brazilian Model Japanese Model DSC-W5/W7/W15/W17 AEP Model How to use UK ModelE Model Acrobat Reader Australian ModelHong Kong Model Korea Model Tourist Model DSC-W5/W7/W15 Chin
SPECIFICATIONS Camera [Input and Output connectors] BC-CS2A/CS2B Ni-MH battery charger
DSC-W5/W7/W15/W17 SERVICE MANUAL LEVEL 2 DSC-W5/W7 Ver 1.1 2005.07 US ModelCanadian Model Argentine Model Revision History Brazilian Model Japanese Model DSC-W5/W7/W15/W17 AEP Model How to use UK ModelE Model Acrobat Reader Australian ModelHong Kong Model Korea Model Tourist Model DSC-W5/W7/W15 Chin
SPECIFICATIONS Camera [Input and Output connectors] BC-CS2A/CS2B Ni-MH battery charger
DSC-W5/W7/W15/W17 SERVICE MANUAL LEVEL 2 DSC-W5/W7 Ver 1.2 2005.09 US ModelCanadian Model Argentine Model Revision History Brazilian Model Japanese Model DSC-W5/W7/W15/W17 AEP Model How to use UK ModelE Model Acrobat Reader Australian ModelHong Kong Model Korea Model Tourist Model DSC-W5/W7/W15 Chin
TABLE OF CONTENTS
DSC-W5/W7/W15/W17 SERVICE MANUAL LEVEL 3 DSC-W5/W7 Ver 1.0 2005.01 US ModelCanadian Model Argentine Model Revision History Brazilian Model Japanese Model DSC-W5/W7/W15/W17 AEP Model How to use UK ModelE Model Acrobat Reader Australian ModelHong Kong Model Korea Model Tourist Model DSC-W5/W7/W15 Chin
SPECIFICATIONS Camera [LCD screen] BC-CSG battery charger
DSC-W70 SERVICE MANUAL LEVEL 2 US Model Ver 1.0 2006.03 Canadian Model Revision History AEP Model UK Model How to use Acrobat Reader E Model Australian Model Hong Kong Model Internal memory Chinese Model ON BOARD Korea Model Argentine Model Photo: Silver Tourist Model Link SPECIFICATIONS BLOCK DIAGR
DSC-W80HDPR SERVICE MANUAL US Model AEP Model E Model Australian Model Hong Kong Model Chinese Model Korean Model
DSC-W80HDPR SERVICE MANUAL US Model Ver. 1.0 2007.03 Canadian Model AEP Model E Model Australian Model Hong Kong Model Chinese Model Korean Model [About the service of this model] DSC-W80HDPR is a commondity that packed the Digital Still Camera and Digital Photo Printer Kit. Refer to each following
CAUTION Danger of explosion if battery is incorrectly replaced.
DSC-W70 SERVICE MANUAL LEVEL 3 US Model Ver 1.0 2006.03 Canadian Model Revision History AEP Model UK Model How to use E Model Acrobat Reader Australian Model Hong Kong Model Chinese Model Internal memory Korea Model ON BOARD Argentine Model Tourist Model Photo: Silver Link SERVICE NOTE PRINTED WIRIN
SPECIFICATIONS Camera [Input and Output connectors] Microphone: Monaural
DSC-W80/W85 SERVICE MANUAL LEVEL 2 US Model Ver. 1.0 2007.03 Canadian Model Revision History AEP Model UK Model How to use E Model Acrobat Reader Australian Model Hong Kong Model Chinese Model Internal memory Korea Model ON BOARD Argentine Model Brazilian Model Japanese Model Photo: Silver Tourist M
SPECIFICATIONS Camera [Input and Output connectors] BC-CSG/BC-CSGB/BC-CSGC
DSC-W90 SERVICE MANUAL LEVEL 2 US Model Ver. 1.0 2007.02 Canadian Model Revision History AEP Model UK Model How to use E Model Acrobat Reader Australian Model Hong Kong Model Chinese Model Internal memory Korea Model ON BOARD Argentine Model Brazilian Model Photo: Silver Link SPECIFICATIONS BLOCK DI
CAUTION If you have any questions about this product,
MVC-CD350 SERVICE MANUAL LEVEL 1 US Model Ver 1.0 2003. 04 Revision History Link SPECIFICATIONS SELF DIAGNOSIS FUNCTION ORNAMENTAL PARTS • INSTRUCTION MANUAL is shown at the end of this document. DIGITAL STILL CAMERA MVC-CD350 COVER SPECIFICATIONS xCamera xAC-L15A/L15B AC Adaptor [System] [Input and
Storage temperature NP-FM50 battery pack Table for difference of functions
MVC-CD200/CD300 SERVICE MANUAL US ModelCanadian Model Level 2 Ver 1.0 2001. 05 AEP Model UK Model E Model Hong Kong Model Australian Model Chinese Model Tourist Model Korea Model Photo : MVC-CD300 Japanese Model This service manual contains information for japanese model as well. On the SY-67 board
CAUTION WARNING This symbol is intended to alert You are cautioned that any changes or
MVC-CD500 SERVICE MANUAL LEVEL 1 US Model Ver 1.0 2003. 04 Canadian Model Revision History AEP Model UK Model E Model Australian Model Japanese Model Link SPECIFICATIONS SELF DIAGNOSIS FUNCTION ORNAMENTAL PARTS • INSTRUCTION MANUAL is shown at the end of this document. DIGITAL STILL CAMERA MVC-CD500