Download: SPECIFICATIONS Camera Power consumption (during shooting with the

DSC-W100 SERVICE MANUAL LEVEL 2 US Model Ver. 1.3 2007.04 Canadian Model Revision History AEP Model UK Model How to use Acrobat Reader E Model Australian Model Hong Kong Model Internal memory Chinese Model ON BOARD Korea Model Brazilian Model Photo: Silver Tourist Model Link SPECIFICATIONS BLOCK DIAGRAMS PRINTED WIRING BOARDS SERVICE NOTE FRAME SCHEMATIC DIAGRAM REPAIR PARTS LIST DISASSEMBLY SCHEMATIC DIAGRAMS • Precaution on Replacing the SY-154 Board The components identified by Les composants identifiés par une mark 0 or dotted line with marque 0 sont critiques pour la mark 0 are critical f...
Author: 阿由葉 Shared: 8/19/19
Downloads: 545 Views: 1723

Content

DSC-W100 SERVICE MANUAL LEVEL 2 US Model Ver. 1.3 2007.04 Canadian Model

Revision History AEP Model

UK Model

How to use Acrobat Reader E Model

Australian Model Hong Kong Model

Internal memory Chinese Model ON BOARD

Korea Model Brazilian Model

Photo: Silver Tourist Model

Link

SPECIFICATIONS BLOCK DIAGRAMS PRINTED WIRING BOARDS SERVICE NOTE FRAME SCHEMATIC DIAGRAM REPAIR PARTS LIST DISASSEMBLY SCHEMATIC DIAGRAMS • Precaution on Replacing the SY-154 Board The components identified by Les composants identifiés par une mark 0 or dotted line with marque 0 sont critiques pour la mark 0 are critical for safety. sécurité. Replace only with part num- Ne les remplacer que par une pièce ber specified. portant le numéro spécifié.

DIGITAL STILL CAMERA

DSC-W100_L2 2007D0500-1 © 2007.4 9-876-941-31 Sony EMCS Co. Published by Kohda TEC,

SPECIFICATIONS Camera Power consumption (during shooting with the

LCD screen on) [System] 0.95 W Image device 9.10 mm (1/1.8 type) color Operating temperature CCD, Primary color filter 0 to 40°C (32 to 104°F) Total pixel number of camera Storage temperature Approx. 8 303 000 pixels −20 to +60°C (−4 to +140°F) Effective pixel number of camera Dimensions 94.2 × 60.6 × 24.8 mm Approx. 8 068 000 pixels (3 3/4 inches × 2 1/2 inches × Lens Carl Zeiss Vario-Tessar 1 inches) (W/H/D, excluding 3 × zoom lens protrusions) f = 7.9 − 23.7 mm (38 − Mass Approx. 192 g (6.8 oz) 114 mm when converted to a (including NP-BG1 battery 35 mm still camera) − pack and wrist strap, etc.)F2.8 5.2 Microphone Electret condenser microphone Exposure control Automatic exposure, Manual exposure, Scene Selection Speaker Dynamic speaker (6 modes) Exif Print Compatible White balance Automatic, Daylight, Cloudy, PRINT Image Matching III Fluorescent, Incandescent, Compatible Flash PictBridge Compatible File format (DCF compliant) Still images: Exif Ver. 2.21 JPEG compliant, DPOF BC-CSG battery charger compatible Power requirements Movies: MPEG1 compliant AC 100 to 240 V, 50/60 Hz, (Monaural) 2 W Recording media Internal Memory (64 MB) Output voltage DC 4.2 V, 0.25 A “Memory Stick Duo” Operating temperature Flash Recommended distance (ISO 0 to 40°C (32 to 104°F) set to Auto): approx. 0.2 m to6m(7 7/8 inches to 19 feet Storage temperature 8 7/8 inches) (W)/approx. −20 to +60°C (−4 to +140°F) 0.3 m to 3.2 m (11 7/8 inches to Dimensions Approx. 62 × 24 × 91 mm 10 feet 6 3/8 inches) (T) (2 1/2 × 31/32 × 3 5/8 inches) [Input and Output connectors] (W/H/D) Multi connector Mass Approx. 75 g (2.7 oz) USB communication Hi-Speed USB (USB 2.0 Rechargeable battery pack NP-BG1 compliant) Used battery Lithium-ion battery [LCD screen] Maximum voltage DC 4.2 V LCD panel 6.2 cm (2.5 type) TFT drive Nominal voltage DC 3.6 V Total number of dots 115 200 (480 × 240) dots Capacity 3.6 Wh (960 mAh) [Power, general] Design and specifications are subject to change Power Rechargeable battery pack NP- without notice. BG1, 3.6 V AC-LS5K AC Adaptor (not supplied), 4.2 V — 2 —,

CAUTION

Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. SAFETY-RELATED COMPONENT WARNING!! ATTENTION AU COMPOSANT AYANT RAPPORT À LA SÉCURITÉ! COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE WITH LES COMPOSANTS IDENTIFÉS PAR UNE MARQUE 0 SUR LES MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU PUBLISHED BY SONY. DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.

SAFETY CHECK-OUT

After correcting the original service problem, perform the following safety checks before releasing the set to the customer. 1. Check the area of your repair for unsoldered or poorly-soldered Unleaded solder connections. Check the entire board surface for solder splashes Boards requiring use of unleaded solder are printed with the lead- and bridges. free mark (LF) indicating the solder contains no lead. 2. Check the interboard wiring to ensure that no wires are (Caution: Some printed circuit boards may not come printed with the lead free mark due to their particular size.) "pinched" or contact high-wattage resistors. 3. Look for unauthorized replacement parts, particularly transistors, that were installed during a previous repair. Point : LEAD FREE MARK them out to the customer and recommend their replacement. Unleaded solder has the following characteristics. 4. Look for parts which, through functioning, show obvious signs • Unleaded solder melts at a temperature about 40°C higher than of deterioration. Point them out to the customer and ordinary solder. recommend their replacement. Ordinary soldering irons can be used but the iron tip has to be applied to the solder joint for a slightly longer time. 5. Check the B+ voltage to see it is at the values specified. Soldering irons using a temperature regulator should be set to 6. FLEXIBLE Circuit Board Repairing about 350°C. • Keep the temperature of the soldering iron around 270°C Caution: The printed pattern (copper foil) may peel away if the during repairing. heated tip is applied for too long, so be careful! • Do not touch the soldering iron on the same conductor of the • Strong viscosity circuit board (within 3 times). Unleaded solder is more viscous (sticky, less prone to flow) than • Be careful not to apply force on the conductor when soldering ordinary solder so use caution not to let solder bridges occur such or unsoldering. as on IC pins, etc. • Usable with ordinary solder It is best to use only unleaded solder but unleaded solder may also be added to ordinary solder. — 3 —, TABLE OF CONTENTS Section Title Page 1. SERVICE NOTE 1-1. Description on Self-diagnosis Display ···························· 1-1 1-2. Process After Fixing Flash Error ·····································1-1 1-3. Method for Copying or Erasing the Data in Internal Memory ··········································································· 1-2 1-4. Precaution on Replacing the SY-154 Board ···················· 1-3 2. DISASSEMBLY 2-1. Disassembly ·····································································2-2 2-2. Exchange Method of Barrier Assy ·································· 2-6 3. BLOCK DIAGRAMS 3-1. Overall Block Diagram (1/2) ··········································· 3-1 3-2. Overall Block Diagram (2/2) ··········································· 3-2 3-3. Power Block Diagram ·····················································3-3 4. PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS 4-1. Frame Schematic Diagram ·············································· 4-1 4-2. Schematic Diagrams ························································4-3 4-3. Printed Wiring Boards ···················································4-17 4-4. Mounted Parts Location ················································4-26 5. REPAIR PARTS LIST 5-1. Exploded Views ······························································· 5-2 5-2. Electrical Parts List ·························································5-7 — 4 —, 1. SERVICE NOTE 1-1. DESCRIPTION ON SELF-DIAGNOSIS DISPLAY Self-diagnosis display • C: ss: ss You can reverse the camera malfunction yourself. (However, contact your Sony dealer or local authorized Sony service facility when you cannot recover from the camera malfunction.) • E: ss: ss Contact your Sony dealer or local authorized Sony service facility. Display Code Countermeasure Cause Caution Display During Error C:32:ss Turn the power off and on again. Trouble with hardware. SYSTEM ERROR Format the “Memory Stick” or internal “Memory Stick” or internal memory is FORMAT ERROR memory. unformatted. C:13:ss Insert a new “Memory Stick”. “Memory Stick” is broken. MEMORY STICK ERROR Turn the power off and on again. Trouble with internal memory. INTERNAL MEMORY ERROR E:61:ss Checking of lens drive circuit. When failed in the focus and zoom initialization. — E:91: Checking of flash unit or replacement Abnormality when flash is being ss of flash unit. (Note) charged. Note: After repair, be sure to perform “1-2. PROCESS AFTER FIXING FLASH ERROR”. 1-2. PROCESS AFTER FIXING FLASH ERROR When “FLASH error” (Self-diagnosis Code E : 91 : ** ) occurs, to prevent any abnormal situation caused by high voltage, setting of the flash is changed automatically to disabling charge and flash setting. After fixing, this setting needs to be deactivated. Flash error code can be initialized by the operations on the Setup screen. Method for Initializing the Flash Error Code Initialize Initializes the setting to the default setting. OK See the following procedure. Cancel Cancels the resetting. 1 Select [OK] with v on the control button, then press z. The message “Initialize all settings Ready?” appears. 2 Select [OK] with v, then press z. The settings are reset to the default setting. • Make sure that the power is not disconnected during resetting. 1-1, 1-3. METHOD FOR COPYING OR ERASING THE DATA IN INTERNAL MEMORY

The data can be copied/erased by the operations on the Setup screen. (When erasing the data, execute formatting the internal memory.) Note 1: When replacing the SY-154 board, erase the data in internal memory of the board before replacement. Note 2: When replacing the SY-154 board or the IC202 on the SY-154 board, execute formatting and initialize the internal memory after

replacement.

Method for Copying the Data in Internal Memory

Copy Copies all imagesinthe i nternal memory to a “Memory Stick Duo”. OK See the following procedure. Cancel Cancels the copying. 1 Insert a “Memory Stick Duo” having 64 MB or larger capacity. 2 Select [OK] with v on the control button, then press z. The message “All data in internal memory will be copied Ready?” appears. 3 Select [OK] with v, then press z. Copying starts. Copying 102_COPY • Use a fully charged battery pack or the AC Adaptor (not supplied). If you attempt to copy image files using a battery pack with little remaining charge, the battery pack may run out, causing copying to fail or possibly corrupting the data. • You cannot copy individual images. • The original images in the internal memory are retained even after copying. To delete the contents of the internal memory, remove the “Memory Stick Duo” after copying , then execute the [Format] comm and in (Internal Memory Tool) (page 52). • You cannot select a folder copied on a “Memory Stick Duo”. • Even if you copy data, a (Print order) mark is not copied.

Method for Formatting the Internal Memory

This item does not appear when a “Memory Stick Duo” is inserted in the camera. The default settings are marked with . Format Formats the internal memory. • Note that formatting irrevocably erases all data in the internal memory, including even protected images. OK See the following procedure. Cancel Cancels the formatting. 1 Select [OK] with v on the control button, then press z. The message “All data in internal memory will be erased Ready?” appears. 2 Select [OK] with v, then press z. The format is complete. 1-2, 1-4. PRECAUTION ON REPLACING THE SY-154 BOARD VIDEO OUT Default Data Check When you replace to the repairing board, the written data of repairing board also might be changed to original setting because of broadcast system (NTSC/PAL). When the data has changed because of board replacing etc., check the default data of VIDEO OUT if destination code is right. If not, rewrite to the right value. VIDEO OUT Default Data Data Page Address NTSC PAL 4F 8D, A2 00 01 Writing Method: 1) Select page: 00, address: 01, and set data: 01. 2) Select page: 40, address: 70, and set data: 01. 3) Select page: 40, address: 98, and check that the data is “00”. 4) Select page: 4F, address: A2, and set data: 00 (NTSC) or data: 01 (PAL). 5) Select page: 4F, address: 8D, and set data: 00 (NTSC) or data: 01 (PAL). 6) Click [Save] on the SEUS screen. 7) Select page: 80, address: 34, and check that the data is “00”. 8) Select page: 80, address: 30, and check that the data is “00”. 9) Select page: 00, address: 01, and set data: 00. Initial Language Data Check If the SY-154 board was replaced, initial language setting may be changed. Accordingly, change the following data so as to set same initial language as that of the set distributing in each region. Initial language: Language displayed at the next starting if the setting of Setup menu was reset. It is different from the language setting selectable with the menu. Initial Language Data Page Address Data Language GP2 GP3 GP4 00 Englishzzz04 Spanishzz06 Portugal z 4F 88, 8C 08 Simplified Chinese z 0B Russian z 0D Korean z Note: GP2 is fixed to English. GP3 is either English, Spanish, or Russian. GP4 is either English, Spanish, Portugal, Simplified Chinese, or Korean. Writing Method: 1) Select page: 00, address: 01 and set data: 01. 2) Select page: 40, address: 70, and set data: 01. 3) Select page: 40, address: 98, and check that the data is “00”. 4) Select page: 4F, address: 88, and set the Initial Language Data. 5) Select page: 4F, address: 8C, and set the Initial Language Data. 6) Click [Save] on the SEUS screen. 7) Select page: 80, address: 34, and check that the data is “00”. 8) Select page: 80, address: 30, and check that the data is “00”. 9) Select page: 00, address: 01, and set data: 00. 10) Turn off the camera. 11) Turn on the camera. Execute “Initialize” of Setup screen. 12) Check the language displayed when the camera starts. 1-3E, 2. DISASSEMBLY

NOTE FOR REPAIR

• Make sure that the flat cable and flexible board are not cracked of bent at the terminal. Cut and remove the part of gilt Do not insert the cable insufficiently nor crookedly. which comes off at the point. (Be careful or some • When remove a connector, dont’ pull at wire of connector. It is possible that a wire is snapped. pieces of gilt may be left inside) • When installing a connector, dont’ press down at wire of connector. It is possible that a wire is snapped.

DISCHARGING OF THE ST-146 FLEXIBLE BOARD’S CHARGING CAPACITOR (C007)

The charging capacitor (C007) of the ST-146 flexible board is charged up to the maximum 330 V potential. There is a danger of electric shock by this high voltage when the capacitor is handled by hand. The electric shock is caused by the charged voltage which is kept without discharging when the main power of the unit is simply turned off. Therefore, the remaining voltage must be discharged as described below.

Preparing the Short Jig

To preparing the short jig, a small clip is attached to each end of a resistor of 1 kΩ /1 W (1-215-869-11). Wrap insulating tape fully around the leads of the resistor to Note: High-voltage cautions prevent electrical shock. Discharging the Capacitor Short-circuit between the two points 1 kΩ/1 W with the short jig about 10 seconds. Wrap insulating tape. R:1 kΩ/1 W (Part code: 1-215-869-11) 2-1,

HELP

2-1. DISASSEMBLY

EXPLODED VIEW HARDWARE LIST

2-1-1. CABINET SECTION Follow the disassembly in the numerical order given. 1Cabinet (Rear) Block (1-1 to 1-6) 2Cabinet (Front) Block (2-1 to 2-3) 1Cabinet (Rear) Block 1-6 (Claw) 2-1 1-1 (#26/#27) 1-5 (#20/#21) 1-3 (#20/#21) 2-3 (Claw) 1-2 (Open) 1-4 (#20/#21) Note: High-voltage cautions Discharging the Capacitor Short-circuit between the two points with the short jig about 10 seconds. 2-2 (#20/#21) 2Cabinet (Front) Block R:1 kΩ/1 W (Part code: 1-215-869-11) 2-2, 2-1-2. LCD PANEL SECTION Follow the disassembly in the numerical order given. EXPLODED VIEW HARDWARE LIST 1Control Switch Block (1-1 to 1-2) 2 LCD Block (2-1 to 2-8) 2-1 2-8 1Control Switch Block 2-2 (#3) 2-5 1-1 (#3) 2-7 2-6 1-2 2-3 (Claw) 2-4 (Claw) 2LCD Block 2-3 SW-479, 2-1-3. CABINET (TOP) SECTION Follow the disassembly in the numerical order given. EXPLODED VIEW 1Cabinet (Top) Block (1-1 to 1-8) 2Capacitor Holder Block (2-1 to 2-4) 3 Lens Block (3-1 to 3-4) 1Cabinet (Top) Block 1-7 (Open) 1-4 (Claw) 1-1 (Boss) 1-2 1-8 1-3 (Adhesive sheet) 1-5 1-6 2-3 3-3 (Claw) 3-2 (Claw) 2-4 (Claw) 3-1 3-4 2Capacitor Holder Block 2-2 2-1 3Lens Block 2-4 MC-162, 2-1-4. BT HOLDER SECTION Follow the disassembly in the numerical order given. EXPLODED VIEW HARDWARE LIST 1SY-154 Board (1-1 to 1-4) 2DC-105 Flexible Board (2-1 to 2-13) 2-2 2-6 (Slide in the direction of arrow) 2DC-105 Flexible Board 2-5 (Boss) 2-4 2-1 (Boss) D 2-7 (Claw) 2-3 (Claw) C-105 1-3 2-10 (Claw) 2-8 1-4 2-12 2-9 (#5) 1-1 (#3) (Claw) 2-11 SY-154 2-13 1-2 (Claw) 1SY-154 Board 2-5, 2-2. EXCHANGE METHOD OF BARRIER ASSY Service parts Part Number Part Name Quantity113-091-427-01 Ring (A), Ornamental12X-3954-476-1 Barrier Assy133-086-156-31 Tapping screw (P2) 2 Tools used Torque driver 2 Soldering iron Weight about 60g Adhesive (Super X) (Note) Note: Use adhesive (Super X) or an equivalent article. Don’t use what becomes white after drying like a quick-drying glue. 2-2-1. PEEL OFF OLD ORNAMENTAL RING A The Ornamental Ring A has adhered to the Barrier Assy strongly and accordingly, use a soldering iron to weaken the adhesive force. Heat four circled portions with the soldering iron. Heating temperature is about 300ºC. Beware of a burn since the entire Ornamental Ring becomes hot. * As the adhesive force of Ornamental Ring A is considerably large, the forced peeling will damage the group-1 frame. Insert the tip of tweezers, etc. into a notch of the group-1 frame and prize the ring. * Take extreme care so as not to damage the coated surface of the group-1 frame. In case of difficult peeling, heat the ring again with the soldering iron. If this re-heating failed, it may be advisable that the ring be peeled while heating the portions 1 → 2 → 3 → 4 in the under figure one by one sequentially. * Discard the removed Ornamental Ring A. 2 3 Tip 1 2-6, 2-2-2. REMOVE OLD BARRIER ASSY 1 Remove two screws. * Discard the removed screws. 2 Remove the Barrier Assy. * Discard the removed Barrier Assy. * After removing the Barrier Assy, if the “G1 Dust-Proof Ring” was removed, it must be returned to the home position. In returning the ring, adjust the location of a projection to the lens direction. This is an important part to prevent the dust and light from coming in. * After removing the Barrier Assy, take extreme care not to drop dust or foreign substances in the lens barrel. 2-2-3. INSTALL NEW BARRIER ASSY 1 Install new Barrier Assy by paying attention to the projection of the Barrier Assy in relation to the position shown in the under figure. 2 Tighten two screws. * Tightening torque = 0.5 kgf Projection 2-7, 2-2-4. ADHERE THE ORNAMENTAL RING A Apply an adhesive to four recesses on the top surface of the Barrier Assy. * Do not apply too much adhesive. (Make quantity of adhesives into the quantity in which a groove hides.) Meeting a “notch” of the Ornamental Ring A with a “projection” of the group-1 frame, push the Ornamental Ring A into the group-1 frame. * The projection of the spring for preventing static electricity must be tilted. Put the 60g weight on the Ornamental Ring A so that the Ornamental Ring A does not float up until the adhesive hardens. Note: Be careful not to give a shock. * After the weight was put, no gap must be present in full circumference between Ornamental Ring A and group-1 frame. A gap, if present, causes the crackle sound NG. * The weight must push in the Ornamental Ring A only. If the weight is put on the mold part of the Barrier Assy, the Ornamental Ring A will float up. Do not put the weight on a black mold part. Notch Adhesive Adhesive Adhesive Projection Adhesive Not gap in full circumference. Completion after 30 minutes. 2-8E,

HELP

Sheet attachment positions and procedures of processing the flexible boards/harnesses are shown. Boss of DC flexible support Claw of main frame DC-105 flexible board

HELP

, 3. BLOCK DIAGRAMS Link OVERALL BLOCK DIAGRAM (1/2) POWER BLOCK DIAGRAM OVERALL BLOCK DIAGRAM (2/2), 3. BLOCK DIAGRAMS 3-1. OVERALL BLOCK DIAGRAM (1/2) ( ) : Number in parenthesis ( ) indicates the division number of schematic diagram where the component is located.

SY-154 BOARD (1/2) SW-479 BOARD

LENS BLOCK (1/2)

CD-628 FLEXIBLE BOARD CN708 FP-427 FLEXIBLELENS IRIS BOARD (1/2) CN001

(METER) (1/2) (1/2) CN002CN301 IC002 171329 CCD_OUT H10 CA_AD00 - CA_AD13 LCD_ D0 –- LCD_ D7 D0 - D7 D0 - D7

BUFFER

LCD_HD, LCD_VD, LCD_CK HSYNC, VSYNC, DCLK HSYNC, VSYNC, DCLK LCD901 IC001 A2 CA_HD H5 CCD IC301 2.5 INCH IMAGER CA_FD XCS_ PANEL XCS XCS COLOR SHUTTER ZOOM FOCUS IRIS CCD SIGNAL A3 J5 W25 4 30 34 LCDPROCESS, MOTOR MOTOR MOTOR MOTOR H1A, H2A, H1B, H2B MONITORTIMING B1 F25 P_ADJ P_ADJ VCOMHMMMMGENERATOR 28 6 15 (1/7) RG IC101 XIC_101_RST_OUT23 34 K4 XRESET XRESET3 31 35 (1/2) V1, V2, V3A, V3B, V4, V5A, CAMERA DSP, SO, SI, SCLK SO, SI, SCLKV5B, V6, V7, V8, V9, V10 A4 CLKTGO E1 LENS CONTROL, FOCUS F2 MODE CONTROL

RESET

5 6 VHLD (2/7) D901 SENSOR D534VST

BACKLIGHT

D6 C2 XCS_FE U22 CN003 VSUB BL_H BL_H26 22 C4 2 32 6 C1 XIC_101_RST_OUT BL_L BL_L 1 33 1 VSUB_CONT 27 21 Q302 IC_101_1_SO, XIC_101_1_SCKE7 VSUB_CONT_PRE, Q301 VSUB_CONT_POST XIC_101_RST_OUT AF4 IC401 D4 XCAM_DR_PS BL_L P21 1 OVERALL (2/2)LENS DRIVE BL_H (PAGE 3-2) (3/7) CN401 IRIS_S_IN, IRIS_S_EN, IRIS_ S_±, IRIS_ M_± IRIS_ S_±, IRIS_ M_± IRISMOTOR IRIS_M_IN, IRIS_M_EN

DRIVER

MS_BS, MS_D0 - MS_D3, MS_CLK F_MOTOR_A, F_MOTOR_A, FOCUS_A, FOCUS_A, FC_DIR_A, FC_DIR_B, F_MOTOR_B, F_MOTOR_B FOCUS_B, FOCUS_B FOCUS FC_BRK_AMOTOR DRIVER IC_101_1_SO, XIC_101_1_SCK IC_101_1_SO, XIC_101_1_SCK ZM_DIR_A, Z_DC_MOTOR_± ZOOM_DC_± ZOOM ZM_BRK_A, ZM_BRK_B IC_101_VOUTMOTOR H26 DRIVER 2 OVERALL (2/2)IC_101_AUOUT (PAGE 3-2) SHUTTER_± SHUTTER_± SHUTTER K26 MSHUT_DIR, MSHUT_EN L26 IC_101_AUINMOTOR DRIVER Y26 XCS_AUDIO USB_DP, USB_DM ZOOM ZOOM FG RESETSENSOR F_PI_SENS_OUT FC_SENS XIC_101_RST_OUT29 U4 Z_PI_SENS_OUT 21 ZM_SENS_1ST V4 XIC_101_RST_OUT Z_BOX2_PI_SENS_Col, Z_BOX1_PI_SENS_Col ZM_DC_FG_1A, ZM_DC_FG_1B CPU_D00 - CPU_D15 LENS TEMP 31 LENS_TEMPSENSOR J25 CPU_A01 - CPU_A21

ST-146 FLEXIBLE BOARD

T002 XE_H D002 6 ST_UNREG M3, E3 B4 +

TRIGGER

FLASH 5 CN704 XCPU_CS0 IC201 UNIT TRIGGER_GND STRB_CHG AE6 E7 C007 15 IC001 10 6 R22 AF9 IC_101_27M_CLKO BURST FLASH XSTRB_FULL B4 (4/7)CHARGING95V23 XE_L D003 CAPACITOR FLASH CONTROL, IC202 CHARGE 6 STRB_CHG_CONT D15 XDSP_QCS0 8 AB22 M8 XCPU_CS4 256M SDRAM,Q001 CONTROL AC6 L3 64M SUPER AND FLASH747STRB_ON A17 DSP_QCLKE R4 M7 (4/7) DRIVE DSP_QCLK Q701 A18 N7 MIS-FLASHING D_1.2V

PREVENTION

D004 DSP_DQ0 - DSP_DQ31, DSP_DQM0 - DSP_DQM3 SELF-TIMER/ XAF_LED AF ILLUMINATOR 14 DSP_AQ0 - DSP_AQ11, DSP_QBA0, DSP_QBA1

A : VIDEO SIGNAL

XAF_LED

A : AUDIO SIGNAL 3 OVERALL (2/2)

: VIDEO/AUDIO SIGNAL (PAGE 3-2)A 3-1 1, 3 2, 4 1, 2 1, 4, 6 - 15 28, 29, 25, 24 13, 10 1 - 4 17 - 20 24 - 27 5 - 8 3, 5, 7 - 16 40, 42, 38, 36 F4, F3 B4, B5 D6, E6, F2, E2, G7, H6, G6, G5, K6, K5, J6, J5 B7, C6 D2, B1 H5, H4, G4, F4, E4, D7, H7, D4 D1, E3 - E1, F3 - F1, D5, A6, F5, G6, G3 - G1, G1, E4 A2, C4, B2 B6, C5 D3, E3 B3, C3 H3 - H1, J1 V5, W4 R5, R25 P5, N2, N6 L4, N5, L2 P6, R2, T4, R23 K5, G4, H4, L5, P4, N4 H2, H1, J1, J2, M5, J4, K4, M6, K2, K1 D21, D22, D20, B22, A22, A23, B23, E20, E21, B24, A24, A25, AF21, AF20, AE20, B25, C25, C26, B26, AB18, AB19, AC19, E10, A10, D10, E11, AB16, AE19, AF19, AB13, AA13, AE13,D17, D18, D16, B10, A11, B11, E12, AF18, AE18, AA15, AF13, AF12, AE12,B18, A19, B19, D11, D12, F12, B12, AC18, AC17, AB15, AA12, AC12, AC11, D8, D7,E16, D19, E19, A12, E13, D13, D14, AE17, AF17, AE16, AB12, AE11, AF11, AB6, AC4, E8, E7, E17, B20, A20, AE4, AE5, B21, A21 F13, B15, F14, E14 AB14, AC16, AC15 AE10, AB11, D6, D5, AC10, AB10 AC1, AD1 U2, R6 AC5, AF6 E9, B8, D9 E6, B4 B5 E8, D8, C8, B8, A8, B7, A7, C7, A2, B2, C2, A1, B1, C1, CPU_A01 - CPU_ A21 D2, D1, D4, B6, A6, C6, B3 IC_101_1_SO, XIC_101_1_SCK F7, E6, E5, G5, E4, G3, E3, G1, G7, F6, F5, F4, CPU_D00 - CPU_ D15 D5, F3, F2, E2 H9, G10, H10, F9, E9, D8, C8, F8, E8, G9, G2, G3, G4, D7, C7, F4, E5, D6, C6, G5, H2, H3, H8, F3, E4, D5, C5, M10. L10, H4, J6, F6 K9, J9, M9, L9, K8, J8, CPU_A20, CPU_ A21 7, 8 11, 10, 14 24 - 17 M5, L5, K4, J4, M4, L4, K3, J3, F7, F5, J7, J5 L11, K10, K12, J11, E11, D12, D10, C10, L12, K11, J10, J12, CPU_D00 - CPU_ D15 E10, D11, D9, C9 27, 26 23, 24, 20 10 - 17 33, 32 30, 31, 29 21 - 28, 3-2. OVERALL BLOCK DIAGRAM (2/2) ( ) : Number in parenthesis ( ) indicates the division number of schematic diagram where the component is located.

SY-154 BOARD (2/2) CN703

MS_BS, MS_D0 - MS_D3, MS_CLK MS_BS, MS_D0 - MS_D3, MS_CLK MEMORY

STICK DUO

XMS_IN 6 D702 (MS ACCESS) CN706 MC-162 FLEXIBLE BOARD USB_DP, USB_DM USB_DP, USB_DM USB_DP, USB_DM

OVERALL (1/2) USB_VBUS 1 USB_VBUS 6

(PAGE 3-1) 2 IC_101_VOUT V_LINE_OUT V_OUT CN001 F3 F1 8 20 MULTI

CONNECTOR

IC_101_AUOUT IC603 AU_LINE_OUT A_OUT_L B6 E2 6 16 AUDIO/VIDEO IC_101_AUIN AMP MIC_SIG A6 (5/7) A3 XAV_JACK_IN 10 XAV_JACK_IN 26 XCS_AUDIO D6 SP± CN601 MIC901 IC_101_1_SO, XIC_101_1_SCK MIC_SIG 1 MICROPHONE

UNIT

XIC_101_RST_OUT CN707 (2/2) RL-064 FLEXIBLE SP± BOARD (2/2) SP± SP901

SPEAKER SW-479 BOARD FP-427 FLEXIBLE XACCESS_LED

(2/2) BOARD (2/2) E4 VL_3V CN001 CN708 1 BT001 S050 - S057 (2/2) (2/2) XAV_JACK_IN LITHIUMCONTOROL U25 BATTERY

SWITCH FUNCTION KEY_AD0, KEY_AD1KEY IC101 BLOCK (2/2)

(SW60610) CN004 FRONT CONTROL MODE_DIAL0, D001 MODE MODE_DIAL1 (2/7) V25 XACV_IN

DIAL DC-105 FLEXIBLE BOARD

IC102 (2/2) D003 CN701 (2/7) Q102 BATT_UNREG + IC_101_TXD434BT901

RL-064 FLEXIBLE BOARD (1/2) AA26 BATTERYIC_101_RXD4 CHARGE BATT_SIG 10 BATT_SIG S BATTERY

CN707 AB25 DETECT TERMINAL D003 (1/2) – AE/AF LOCK XAE_LOCK_LED /SELF-TIMER 3 F22 IC102 (1/2) D001 (2/7) X101 FLASH CHARGING 12MHzXSTRB_LED USB_VBUS4 E22 EXTAL61C9/RECORD A6 ACV_UNREGXMS_IN B10 J001 Q001, Q002 D002 DC INXPWR_LED 5 BATT/XEXT(POWER) 6 D23 A9 IC001 S001 X001 DC/DC POWER 8 XPOWER_ON 2 IC103 32.768kHz B8 CONVERTER, 3 A8 1 RESET H1 BATTERY (6/7) D004

AUTHENTICATE

S002 XAE_LOCK_SW10 N21 (2/7) ST_UNREG (SHUTTER) 11 XSHUTTER_SW P23 EVER_SRAM MS_VCC D_3.2V XCS_DD 13 KEY_AD2 W23 A6 A_3.2V H25 D_1.8V S003 S005 IC_101_0_SI, IC_101_0_SO, XIC_101_0_SCK CAM_2.9V(ZOOM) T W (INDEX) CAM_-7.5V R26 XDD_RST_OUT A7 CAM_15V S004 XPLAY_SW Y4 M_5V N 15 AA23 XPWR_OFF B7 D_1.2V (PLAYBACK) K25 BATT_SENS D4 T25 MS_PWR_ON D3 E9 BL_H 1 OVERALL (1/2)F9 BL_L (PAGE 3-1) XPOWER_ON C7 XPLAY_SW XAF_LED 3 OVERALL (1/2)D7 A4

A : VIDEO SIGNAL (PAGE 3-1) A : AUDIO SIGNAL A : VIDEO/AUDIO SIGNAL 05

3-2 6, 2 4, 3 2, 1 30, 31 32, 33 L22, L25 K23, L23 E6, D5 AA5, AB5, Y5 A1, C1 6 - 8 C6, C5, B6 1 - 4 11 - 14 7, 9 3, 4 2 - 5, 7, 8 10, 12, 3-3. POWER BLOCK DIAGRAM ( ) : Number in parenthesis ( ) indicates the division number of schematic diagram where the component is located.

DC-105 FLEXIBLE SY-154 BOARD ST-146 FLEXIBLE BOARD

J001 DC IN BOARD CN701 CN704 T002 FB003 ACV_UNREG F001 ST_UNREG ST_UNREG L001 D002 FLASH

UNIT

F002 UNREG D004 + D_3.2V D003 13 SELF-TIMER/ BATT/XEXT AF ILLUMINATOR BT901 5 IC001 C007 M_5V ST_5V CHARGINGBATTERY FB002 D001 12 FLASH CONTROL, CAPACITORTERMINAL Q001, Q002 CHARGE CONTROL + BATT_UNREG S BATT_SIG 10 IC001 – ACV_GND DC/DC CONVERTER, FP-427 FLEXIBLE SW-479 BOARD RESET BOARD LCD901 (6/7) CN708 CN001 CN002 J1 UNREG1-1 D_3.2V VDD L001 29 5 17 VDD 2.5 INCH K1 UNREG1-2 COLOR

RL-064 FLEXIBLE BOARD LCDJ6 UNREG2-1 L004 F003 MONITOR

D003 CN707 K6 UNREG2-2 LX3 E10 D901 AE/AF LOCK /SELF-TIMER 5 D_3.2V D005 BACKLIGHT A1 PWR1-1 CN003 D001 VO3 E9 BL_H BL_H BL_H B1 PWR1-2 2 32 6 FLASH CHARGING BL_L BL_L BL_L /RECORD C2 PWR1-3 VL3 F9 1 33 1 D10 PWR2 D002 (POWER) VO1-1 F1 D_3.2V VO1-2 F2 2.9V REG LENS BLOCK S001 IC601VFB1 H2 (5/7) CN401 POWER 8 XPOWER_ON C7 XPWRON1 L003 Z_BOX1_PI_SENS_VCCAU_2.9V 4 Vin Vout 3 IC603 Z_BOX1_PI_SENS_OUT D_3.2V AUDIO/VIDEO 12 VL_3V AMP 11 GND (Z_BOX1) BT001 1 B8 RTCBAT M_5VLDO2IN B3 ZOOM LITHIUM D004 D_1.8V (5/7) 14 Z_BOX2_PI_SENS_VCC FG BATTERY LDO2 A3 15 Z_BOX2_PI_SENS_OUTH1 LDO1 XZM_FG_LED 16 GND (Z_BOX2) LDO3IN B2 LDO3 A2 CAM_2.9VD702 D_3.2V 23 Z_PI_SENS_VCC ZOOM (MS ACCESS) D_3.2V L002 XZM_RST_LED GND (Z_PI_SENS) RESETLX2 C10 D_1.2V 22 SENSOR VFB2 D8 D_3.2V CN703 Q004, Q005 IC401 Q401 MEMORY MS_VCC L001 L006 M_5V LENS DRIVE F_PI_SENS_VCC FOCUS STICK 9 G2 MS_PWR MS_PWR_IN G1 SWITCHING 28 RESET DUO (3/7)D3 MS_PWR_ON SENSORXFC_RST_LED Q003 BG4 G9 DC CONTROL TG4 F10 PSG4 G8 VFB4 F7 CAM_2.9V L302 Q006 SWITCHING CAM_-7.5V FB302 IC301 D_3.2V L303 CCD SIGNAL V25 PH[2] PJ[0] T25 MS_PWR_ON GT6 H6Q102 L304 PROCESS, VFB6 H7 TIMING BATTERY GENERATOR CHARGE VREF6 G6 FB304 (1/7) DETECT BATT_SENS AN[4] K25 D4 DTG1 L007 D008 CAM_15V FB303 AB25 RXD4 IC_101_0_SI, IC_101_0_SO, PWR56OUT1 J7 SCKO XIC_101_0_SCK SCLK PWR56OUT2 K7 F7 MSHUT(P/S) TXDO SI LX5-1 J943AA26 TXD4 RXDO SO LX5-2 J10 IC102 PG[7] W23 XCS_DD A6 CE LX5-3 K9 IC103 (2/7) RST R26 XDD_RST_OUT A7 XRESET LX5-4 K10 BATTERY RSTA Y4 VFB5 H9 AUTHENTICATE PG[0] AA23 XPWR_OFF B7 XPWROFF (2/7)

CD-628 FLEXIBLE BOARD

LED0 B3 XZM_RST_LED LED1 E5 XFC_RST_LED LED2 D4 XZM_FG_LED IC002 IC101 BUFFER D_1.2V CAMERA DSP, L102 IC201 LENS BURST FLASH CN301 CONTROL, A_3.2V (4/7) L301 26 CAM_15V IC001 MODE FB301 CONTROL, VI_3.2V L601 19 CAM_-7.5V CCD IMAGER

FRONT

CONTROL AU_2.9V Q002 19 GND (2/7) D_3.2V IC202 256M SDRAM, PWR_SAVE L101 L201 2564M SUPER AND SDRAM_VCC (4/7) 3-3E 6 - 9 11 - 14 1 - 4 D_3.2V BATT_SIG XACV_IN AA5, AB5, Y5 EVER_SRAM C6, C5, B6 D_1.2V D_1.8V A_3.2V AU_2.9V D_3.2V 9 - 11, 4. PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS 4-1. FRAME SCHEMATIC DIAGRAM

RL-064 FLEXIBLE BOARD

BT001 LITHIUM BATTERY SP901 BT901 SPEAKER

DC-105 BATTERYTERMINAL FLEXIBLE BOARD

J001 DC IN

ST-146 FLEXIBLE BOARD

1 14 1 15

MC-162 FLEXIBLE BOARD

CN001 MULTI CONNECTOR LEVEL3 LEVEL3

SY-154 BOARD SY-154 BOARD

(SIDE B) (SIDE A) C007CHARGING

CAPACITOR FLASH UNIT

CN701 CN704 15 1 14 1 14 1 CN707 14 2 IC201 (Not supplied) CD-628 FLEXIBLE BOARD 1 10 1 MIC901

MICROPHONE UNIT

CN601 CN703 4521MEMORY STICK

CONNECTOR LENS BLOCK

11 12

FP-427 FLEXIBLE BOARD CONTROL SWITCH BLOCK

(SW60610) CN00461D901

BACKLIGHT

LCD901 2.5 INCH

COLOR

LCD MONITOR

SW-479 BOARD SW-479 BOARD

(SIDE B) (SIDE A) 4-1 FRAME 27 1 25 28 2 26 1 104513CN706 10 1 33 1 33 1 CN708322230 2 44 CN401 CN301 1 31 1 45 2 32 CN001 1 33 1 33 2 38 CN002 1 3916CN003 1 14, 4-2. SCHEMATIC DIAGRAMS Link CD-628 FLEXIBLE BOARD (CCD IMAGER) ST-146 FLEXIBLE BOARD (FLASH DRIVE) SW-479 BOARD (LCD, CONTROL SWITCH) MC-162 FLEXIBLE BOARD (MULTI CONNECTOR) FP-427 FLEXIBLE BOARD RL-064 FLEXIBLE BOARD (CONTROL SWITCH) CONTROL SWITCH BLOCK (SW60610) DC-105 FLEXIBLE BOARD (BATTERY IN, DC IN) COMMON NOTE FOR SCHEMATIC DIAGRAMS, 4-2. SCHEMATIC DIAGRAMS 4-2. SCHEMATIC DIAGRAMS THIS NOTE IS COMMON FOR SCHEMATIC DIAGRAMS (In addition to this, the necessary note is printed in each block) (For schematic diagrams) 1. Connection • All capacitors are in µF unless otherwise noted. pF : µ µ Pattern boxF. 50 V or less are not indicated except for electrolytics Color bar chart and tantalums. Pattern box PTB-450 For PTB-450: • Chip resistors are 1/10 W unless otherwise noted. J-6082-200-A J-6020-250-A Ω ork =1000 Ω, MΩ=1000 kΩ. Small pattern box For PTB-1450: • Caution when replacing chip parts. PTB-1450 J-6082-559-A New parts must be attached after removal of chip. J-6082-557-A Be careful not to heat the minus side of tantalum capacitor, Because it is damaged by the heat. L = 30 cm (PTB-450) • Some chip part will be indicated as follows. L = 12 cm (PTB-1450) Example C541 L452 22U 10UH Pattern box Front of the lens TA A 2520 L Camera Kinds of capacitor External dimensions (mm) Case size • Constants of resistors, capacitors, ICs and etc with XX indicate that they are not used. In such cases, the unused circuits may be indicated. 2. Adjust the distance so that the output waveform of • Parts with ★ differ according to the model/destination. Fig. a and the Fig. b can be obtain. Refer to the mount table for each function. H • All variable and adjustable resistors have characteristic curve B, unless otherwise noted. • Signal name XEDIT → EDIT PB/XREC → PB/REC • 2: non flammable resistor • 5: fusible resistor • C: panel designation • A: B+ Line • B: B– LineABA=BBA• J : IN/OUT direction of (+,–) B LINE. Fig. a (Video output terminal output waveform) • C: adjustment for repair. • A: not use circuit Electronic beam (Measuring conditions voltage and waveform) scanning frame • Voltages and waveforms are measured between the measurement points and ground when camera shoots CRT picture frame color bar chart of pattern box. They are reference values and reference waveforms. (VOM of DC 10 MΩ input impedance is used) • Voltage values change depending upon input impedance of VOM used.) Fig.b (Picture on monitor TV) Precautions for Replacement of Imager When indicating parts by reference number, please • If the imager has been replaced, carry out all the adjustments include the board name. for the camera section. The components identified by mark 0 or dotted line with • As the imager may be damaged by static electricity from mark 0 are critical for safety. its structure, handle it carefully like for the MOS IC. Replace only with part number specified. In addition, ensure that the receiver is not covered with dusts nor exposed to strong light. Les composants identifiés par une marque 0 sont critiques pour la sécurité. Ne les remplacer que par une pièce portant le numéro spécifie. 4-3 Yellow Cyan Green White Magenta Red Blue, 12345678910 11

CD-628 FLEXIBLE BOARD Note: CD-628 flexible complete board and IC001 areA not supplied, but they are included in CCD IMAGER CCD block assy.Note: Voltage of IC001, IC002 and Q002 can not be measured, XX MARK:NO MOUNT because they are mounted by the side of lens.

CL001 LND045 GND 45

B LND044 GND 44

CL003 LND043 GND 43 LND042 H2A 42 CL007 LND041 GND 41 LND040 H1A 40 LND039 GND 39 CL002 LND038 H1B 38 LND037 GND 37 CL011

C LND036 H2B 36

LND035 GND 35 LND034 RG 34 CL014 LND033 GND 33 LND032 GND 32 LND031 CCD_GND 31 LND030 NC 30 LND029 CCD_OUT 29 16 15 14 13 12 11 10987654321

D LND028 GND 28

LND027 GND 27

SY-154321LND026 CAM_15V 26

(1/7) LND025 IC001 CN301 PWR_SAVE 25 IC002 Page 4-6 LND024 GND 24 CCD IMAGER of Level 3 BUFFER IC001 LND023 GND 23 IC002 ICX476CQZ-13 CXA3691EN-T9 LND022 VSUB 22456LND021 VSUB_CONT 21

E LND020 GND 20 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32

LND019 CAM_-7.5V 19 C008 0.01u LND018 GND 18 R010 LND017 GND 17 220k C003

XX

LND016 V10 16 LND015 V9 15 LND014 V8 14 LND013 V7 13 CL020

F LND012 V6 12

LND011 V5B 11 CL021 LND010 V5A 10 LND009 V4 9 LND008 V3B 8 Q002 R004 LND007 V3A 7 DTC144EMT2L 470 POWER SAVE LND006 VHLD 6 SWITCH LND005 V2 5

G LND004 VST 4

C001 R005 LND003 V1 3 XX 1k LND002 GND 2 C005 LND001 GND 1 0.1u

H

4-5 CD-628

OUT IDRV GND VCC IN ISF

VOUT NC NC V10 GND V9 GND V8 C002 0.22u GND V7 VDD V6 C007 RG V5B 0.1u H2B V5A H1B V4 SUB V3B CSUB V3A H1A VHLD H2A V2 VL VST GND NC NC V1, Schematic diagrams of the SY-154 board are not shown. Pages from 4-6 to 4-12 are not shown., 12345678910 11 12 13 14

A FP-427 SW-479 BOARD FLEXIBLE LCD, CONROL SWITCH CN003 6P D901 BOARD XX MARK:NO MOUNT

1 BL_L BACKLIGHT 2 N.C. 3 N.C.

PRINTED WIRING BOARD 4 N.C.

is omitted. CN001 33P 5 N.C.

B LND001 BL_L 1 33 BL_L LND034 BL_L 33 6 BL_H

LND002 BL_H 2 32 BL_H LND035 BL_H 32 C013 XX LND003 XRESET 3 31 XRESET LND036 XRESET 31 LND005 R007LND006 LND007 CN002 39P0 LND004 XCS 4 30 XCS LND037 XCS 30 39 VCOM LND005 REG_GND 5 29 REG_GND LND038 REG_GND 29 D007 D006XX 38 TFTCOMXX LND006 SO 6 28 SO LND039 SO 28 37 NC LND007 SI 7 27 SI LND040 SI 27 R005 36 VSS LND008 SCLK 8 26 SCLK LND041 SCLK 26 C009 35 XRESET

XX C LND009 REG_GND 9 25 REG_GND LND042 REG_GND 25 34 XCS

LND010 VSYNC 10 24 VSYNC LND043 VSYNC 24 33 SI LND011 HSYNC 11 23 HSYNC LND044 HSYNC 23 32 SCLK LND012 REG_GND 12 22 REG_GND LND045 REG_GND 22 31 VSYNC

SY-154 LND013 REG_GND 13 21 REG_GND LND046 REG_GND 21 30 HSYNC

(7/7) LND014 DCLK 14 20 DCLK LND047 DCLK 20 29 DCLK CN708 LND015 REG_GND 15 19 REG_GND LND048 REG_GND 19 28 D7 Page 4-12 of Level 3 LND016 REG_GND 16 18 REG_GND LND049 REG_GND 18 27 D6

D LND017 D7 17 17 D7 LND050 D7 17 26 D5

LND018 D6 18 16 D6 LND051 D6 16 25 D4 LND019 D5 19 15 D5 LND052 D5 15 24 D3 LND020 D4 20 14 D4 LND053 D4 14 23 D2 LND021 D3 21 13 D3 LND054 D3 13 22 D1 LCD901 LND022 D2 22 12 D2 LND055 D2 12 21 D0 2.5INCHCOLOR LND023 D1 23 11 D1 LND056 D1 11 C005 LCD2.2u 20 NC MONITOR LND024 D0 24 10 D0 LND057 D0 10 19 VS R006 56k

E LND025 REG_GND 25 9 REG_GND LND058 REG_GND 9 18 VCOMDC

LND026 REG_GND 26 8 REG_GND LND059 REG_GND 8 17 VDD R064 C006 LND027 REG_GND 27 7 REG_GND LND060 REG_GND 7 XX 2.2u 16 VR LND028 P_ADJ 28 6 P_ADJ LND061 P_ADJ 6 15 VCOMH R003 C026 XX D002 LND029 VDD 29 5 VDD LND062 VDD 5 47k RB520S-30TE61 14 NC L001 ±0.5% LND030 C003MODE_DIAL0 30 4 MODE_DIAL0 LND063 MODE_DIAL0 4 10uH 2.2u C017 13 VGH LND031 XXMODE_DIAL1 31 3 MODE_DIAL1 LND064 MODE_DIAL1 3 12 VGL C025 C002 C004 LND032 KEY_AD0 32 2 KEY_AD0 LND065 KEY_AD0 2 XX 2.2u 2.2u D003

F IC002 XXXX D001 C010 2.2u

11 C2+ LND033 KEY_AD1 33 1 KEY_AD1 LND066 KEY_AD1 1 RB520S-30TE61 C018 10 C2- R061 Vin R063 XX XX CE 9 C3+ XX R00432Vout 1M C012 2.2u 8 C3- R062 VSS C014 XX XX C019 7 COMCCONTROL SWITCH C007 XX1 2.2u 6 VDD2LND004 STATIC_GND D008 C008 5 C1+

BLOCK (SW60610) XX C024 R001 2.2uC023 C011C001XX XX C020 47k D004 10u10u 0.01u ±0.5% XX 4 C1-

1 3 VSS

G CONTROL SWITCH BLOCK (SW60610) is D009 D005 C016replaced as block, so that PRINTED XX C015 XX 2 TFTCOMR050 R052 R054 R055 XX XX WIRING BOARD is omitted. 2 3 4700 4700 4700 4700 R010 1 VCOM0

1212212121R011 R115 R114 R113 0 8200 3600 220034344343434321S050 S052 S054 S056 S057 R116 Soft 22000 P_AUTO AUTO MOVIE snap CN004 6P (SELF TIMER) (MACRO) (FLASH) (SET)

H IMAGE5 6 MODE_DIAL0 LND106 MODE_DIAL0 6 BRIGHTNESS(EV)R051 R053

Manual 5 MODE_DIAL0(N.C.) LND105 MODE_DIAL0(N.C.) 5 4700 4700 4 REG_GND LND104 REG_GND41212123REG_GND(N.C.) LND103 REG_GND(N.C.) 3 ISO3434342MODE_DIAL1 LND102 MODE_DIAL1278910 1 MODE_DIAL1(N.C.) LND101 MODE_DIAL1(N.C.) 1 R109 S051 S053 S055 22000 Twilight Twilightportrait Beach Landscape SCREEN IMAGE SIZE MENU DISPLAY /DELETE

I

R110 R111 R112 8200 3600 2200 4-13 SW-479, FP-427, SW606102134, • Refer to page 4-3 for mark 0. 12345678910

A ST-146 FLEXIBLE BOARD FLASH DRIVE

L001 T002 D002 2.2uH FT02P80TPXX MARK:NO MOUNT26

NO MARK:REC/PB MODE

1 LND019 XE_H C007

B 4 145uF330V

CHARGING R001 CAPACITOR 1M LND01735TRIGGER D004 DOR5352 LND018 FLASH SELF-TIMER/ C00222u TRIGGER_GND UNITAF ILLUMINATOR 6.3V C006 0.01u 250V43524.2

C6117 16 15 14 13 XE_L

LND014 XAF_LED 14 LND020 LND013 D_3.2V 13 D003 LND012 ST_5V 12 RR255L-400TE25 LND011 ST_UNREG 11 C005 4.2 0.047u LND010 ST_UNREG 10 SW IC001 PGNDSY-154 LND009 ST_UNREG 9 SW PGND (7/7) 5 0.1 R004 LND008 FLASH CONTROL, CN704 STRB_CHG_CONT 8 VCC CHARGE CONTROL CHG 100k

D 0 IC001 3.2 1/10WPage 4-12 LND007 STRB_ON 7 F_ON XFULL

of Level 3 TPS65552RGTR C004 LND006 STRB_CHG 6 0.1u LND005 XSTRB_FULL 5 LND004 REG_GND 4 LND003 REG_GND 3 C001 C003 LND002 REG_GND 2 XX 1u5678LND001 REG_GND 1 0.1 0

E

5 1 2666273Q001CY25BAJ-8F-T2384FLASH DRIVE R003 R002 0 33 4.7M

F

4-14 ST-1464321N.C HGND I_PEAK N.C G_IGBT VBATT N.C N.C N.C 9 10 11 12, • Refer to page 4-3 for mark 0. 123456712345

MC-162 FLEXIBLE BOARD Note: CN-001(multi connector) is not supplied,A but this is included in MC-162 flexible DC-105 FLEXIBLE BOARD MULTI CONNECTOR complete board. A BATTERY IN, DC IN XX MARK:NO MOUNT CN001 28P(MULTI CONNECTOR) XX MARK:NO MOUNT

To AV/USB Multi Cable N.C. N.C. N.C. N.C. LND001

B LND001 ACV_UNREG 1USB_VBUS 1 USB_VBUS N.C. B LND002

LND002 ACV_UNREG 2 FB003 4 USB_GND 2 LF001 USB_GND N.C. 113LND003 LND003 ACV_UNREG 3USB_DP 3 USB_DP N.C. 3 J00124

SY-154 LND004 ACV_UNREG 4USB_DM 4 USB_DM N.C. LND004 FB001 5P2

(5/7) DC INLND005 USB_GND 5 USB_GND N.C. LND005 BATT/XEXT 5 CN706 SY-154 R001LND006 ACV_GND 6 1k Page 4-10 LND006 AU_LINE_OUT 6 A_OUT_L N.C. (6/7) of Level 3 R004 LND007LND007 ACV_GND 7A_GND 7 A_GND N.C. CN701 Page 4-11 LND008 ACV_GND 8 FB002LND008 V_LINE_OUT 8 V_OUT N.C. of Level 3 R005 LND009 ACV_GND 9V_GND 9 LND009V_GND N.C.

C LND010LND010 BATT_SIG 10XAV_JACK_IN 10 N.C. N.C. C LND016

LND011 BATT_UNREG 11 BATT_UNREG XAV_JACK_IN N.C. 2 3 LND012 BATT_UNREG 1228 LND017 D00111LND013 SBATT_UNREG 13 BATT_SIG BT901 MAZW068H0LS0 BATTERY32LND014 BATT_UNREG 14 LND018 TERMINAL BATT_GND STATIC_GND LND015 D002 D003 MAZW068H0LS0

D EDZ TE61 6.8B

STATIC_GND

D

05 051234567

A RL-064 FLEXIBLE BOARD CONTROL SWITCH XX MARK:NO MOUNT BT001 LITHIUM BATTERY

D003 LND001 VL_3V 1 SML-412MWT86 LND002 (AE/AF LOCK/SELF-TIMER) (GREEN)REG_GND 2 LND003 XAE_LOCK_LED 3 D001 SML-512WWT86 LND004 XSTRB_LED 4 (FLASH CHARGING/RECORD) (YELLOW) LND016

B LND005 D_3.2V 5 D002 SP+ SP901 SY-154 LND006 XPWR_LED 6 SML-412MWT86 SPEAKER

(7/7) (POWER) (GREEN) SP- CN707 LND007 SP+ 7 LND017 Page 4-12 LND008 XPOWER_ON 8 of Level 3 LND009 SP- 912S001 LND010 XAE_LOCK_SW 10 POWER34LND011 XSHUTTER_SW 11 LND012 REG_GND 12

SHUTTER C LND013 KEY_AD2 13 4 3

LND014 N.C. 14 LND015 XPLAY_SW 15 S002 (SHUTTER) AE LOCK12R001

Note: RL-064 flexible complete board S003

and S002 (shutter) are not supplied, S005

D but they are included in cabinet (T) block assy.

W (ZOOM) T (INDEX) 1 2 S00434(PLAYBACK) 3223R002

XX E 1 1

D004 D005 D006 XX XX XX STATIC_GND LND018 4-15 MC-162, RL-064, DC-105 26 24 22 20 18 16 14 12 10864225 23 21 19 17 15 13 1197531, 4-3. PRINTED WIRING BOARDS Link CD-628 FLEXIBLE BOARD MC-162 FLEXIBLE BOARD SW-479 BOARD RL-064 FLEXIBLE BOARD ST-146 FLEXIBLE BOARD DC-105 FLEXIBLE BOARD COMMON NOTE FOR PRINTED WIRING BOARDS MOUNTED PARTS LOCATION, 4-3. PRINTED WIRING BOARDS 4-3. PRINTED WIRING BOARDS THIS NOTE IS COMMON FOR PRINTED WIRING BOARDS • : Uses unleaded solder. • Chip parts. • : Circuit board Transistor Diode : Flexible boardC6544565445333123Pattern from the side which enables seeing. : pattern of the rear sideBE123321123321212121654(The other layers’ patterns are not indicated) • Through hole is omitted. 1221324334654456• There are a few cases that the part printed on diagram isn’t mounted in this model. 543345411221123321• C: panel designation32414-17,

CD-628 (2 layers)

: Uses unleaded solder.

CD-628 FLEXIBLE BOARD Note: CD-628 flexible complete board and IC001 are not supplied, but they are included in CCD block assy.

LND045 LND044 LND043 LND042 LND041 LND040 LND039 LND038 C007 16 1532LND037 LND036 LND035 1 LND034 LND033 LND032 LND031 LND030 LND029 LND028 LND027 LND026 C001 LND025 LND024 LND023 LND022 IC001 LND021 LND02031LND019 LND018 LND017 LND016 LND015 IC002 LND014 LND013 LND012 LND0114617 LND010 LND009 C003 LND008 18 19 31 32 LND007 LND006 LND005 LND004 LND003 LND002 LND001 1 R005 CL020 CL001 CL007CL021 CL011 C005 CL003 CL002 CL014 1-870-222- 11 4-19 CD-628 R010 C008

Q002

E B

C

R004 C002, Printed wiring boards of the SY-154 board are not shown. Page 4-20 is not shown., SW-479 (4 layers) : Uses unleaded solder.

SW-479 BOARD (SIDE A) SW-479 BOARD (SIDE B) S051 SCREEN DISPLAY A A

CN0041361S055

MENU S055

2 4

S054

LND005 LND006 (FLASH)

B 3 21 B D008 LND007 C020 S052

R062

S056 1

3434S057 (MACRO)

IMAGE BRIGHTNESS

(EV) 1 2 (SET) 1 22 4 C003 C026 R050 R052 R00334C006

D001 S050

1 2 L001

C LND004 (SELF-TIMER) C

C004 C005 C001 C016 S05334R011 IMAGE SIZE

D005 /DELETE 1-870-219- 11

1-870-219- 11120512214-21 SW-479

D009

2 3 R006 R004 D002

D003 D004 C014

C011 2 38 R007 C012 C013 CN002 R064 1 3916CN003 C02513C002 C018 S053 C019 S056 R005 S051 C010 C009 C008 R054 C01724R001 R055 R051 R053 C00713R010 C015 S050 S054

D006

2 4 D007 C024 R063 2 32 R061 IC0024312S052 CN001 C023 1 33,

ST-146 (2 layers), MC-162 (2 layers)

: Uses unleaded solder. 14 LND014 LND013 LND012 LND011 LND010 LND009 LND008 LND007 LND006 LND005 LND004 LND003 LND002 1 LND001

ST-146 FLEXIBLE BOARD FLASH UNIT

XE_L XE_H TRIGGER_GND

TRIGGER C007 1 R0042 1 R0012 K ALND020 LND019 D004 CHARGING D002 SELF-TIMER/ CAPACITOR

R003 11 2 C0021 AF ILLUMINATOR859412 1 13 1664

IC001

6 4 LND018 LND017 L001 - D004

ST-146>PI< 1 3

1 3 1-870-220- 11 C007 10 1

MC-162 FLEXIBLE BOARD D003 R005

R004

D001 D002

1123231-870-221- 11 LND011 26 2 25 1 28 CN001 27

Note: CN001 (multi connector) is not supplied,

(MULTI CONNECTOR) but this is included in MC-162 flexible complete board. 4-22 ST-146, MC-162 LF0013412

D003

C00641

Q001

5 8 C005 R10022 111222 999 1111333 88888 1111666 5555 11111 444444 1111C003222215315555555555555555 33333 T002 6 22 44444624C002 111C0024 LLNNDD001100 LLNNDD000099 LLNNDD000088 LLNNDD000077 LLNNDD000066 LLNNDD000055 LLNNDD000044 LLNNDD000033 LLNNDD000022 LLNNDD000011 MC- >PI< 12121111111111111111-888888888777777700000000000- 2222222222222222222222222111111111- 111 22222 888 55555555555555555555555555555141111212,

RL-064 (1 layer), DC-105 (2 layers)

: Uses unleaded solder.

S001 RL-064 FLEXIBLE BOARD 13 POWER 2 3RL-064 D004 >PI< LND018 Note: RL-064 flexible complete board and S002 (shutter) are not supplied, S001 D006 S005 S003 R001 R002

but they are included in cabinet (T) block assy. 4WT2(INDEX)

D002

(POWER)

S002

(SHUTTER)

D001 FLASH CHARGING/ RECORD

1-870-224- 11 LND017

D001 - SP901

K A SPEAKER BT00

D003 1 + S0041-870-

224- N LND016 (PLAYBACK) 05 D003

AE/AF LOCK/ SELF-TIMER BT001 BATTERY, - S +CAUTION

Danger of explosion if battery is incorrectly replaced. LITHIUM SECONDARY Replace only with the same or equivalent type. BT901 LND018 LND017 LND016 1 15

DC-105 FLEXIBLE BOARD

LND015 FB002 R001 FB001 FB003

J001 DC IN

1-870-223- 11 1 14 4-23 RL-064, DC-105 SP+ SP- A K LND001 LND002 LND003 LND004 LND005 4 LND006 2 LND007 LND008 LND009 LND010 LND011 LND012 LND013 S004 LND014 LND01531

D005

3221S0023445J001 S00313LND001 LND002 LND003 LND004 LND005 LND006 LND007 LND008 LND009 LND010 LND011 LND012 LND013 LND014 DC-105 1-870-223- S00, Mounted parts location of the SY-154 board are not shown. Page 4-25 is not shown., 4-3. PRINTED WIRING BOARDS 4-4. MOUNTED PARTS LOCATION no mark : side A * mark : side B

SW-479 BOARD

* C001 C-1 * C002 C-2 C003 C-1 C004 C-1 * C005 C-1 C006 C-1 * C007 C-2 * C008 C-2 * C010 C-2 C011 C-1 C012 C-2 * C020 B-1 * CN001 B-1 CN002 C-2 CN003 B-2 CN004 A-1 D001 C-1 D002 C-1 * L001 C-1 * R001 C-2 * R003 C-2 R004 C-1 * R005 B-2 R006 B-1 R007 B-2 * R010 C-1 R011 C-1 * R050 C-1 * R051 C-2 * R052 C-1 * R053 B-2 * R054 B-2 * R055 B-2 * S050 C-1 * S051 A-2 * S052 B-1 * S053 C-2 * S054 B-1 * S055 A-2 * S056 B-2 * S057 B-1 4-26E SW-479,

NOTE

5. REPAIR PARTS LIST NOTE: Characters A to Z of the electrical parts list indicate location of exploded views in which the desired part is shown.

Link EXPLODED VIEWS

ABCCABINET SECTION LCD PANEL SECTION CABINET (TOP) SECTIONDEBT HOLDER SECTION LENS BLOCK SECTION

Link ELECTRICAL PARTS LIST ACCESSORIES

CD-628 FLEXIBLE BOARD E MC-162 FLEXIBLE BOARD C ST-146 BOARD E DC-105 FLEXIBLE BOARD D RL-064 FLEXIBLE BOARD C SW-479 BOARD B, 5. REPAIR PARTS LIST 5. REPAIR PARTS LIST NOTE: • -XX, -X mean standardized parts, so they may have some differences from When indicating parts by reference number, the original one. please include the board name. • Items marked “*” are not stocked since they are seldom required for routine service. Some delay should be anticipated when ordering these items. The components identified by mark 0 or • The mechanical parts with no reference number in the exploded views are not dotted line with mark 0 are critical for safety. supplied. Replace only with part number specified. • Due to standardization, replacements in the parts list may be different from Les composants identifiés par une marque the parts specified in the diagrams or the components used on the set. 0 sont critiques pour la sécurité. • CAPACITORS: Ne les remplacer que par une pièce portant le numéro spécifié. uF: µF • COILS uH: µH • RESISTORS • Color Indication of Appearance Parts All resistors are in ohms. Example: METAL: metal-film resistor (SILVER) : Cabinet’s Color METAL OXIDE: Metal Oxide-film resistor (Silver) : Parts Color F: nonflammable • SEMICONDUCTORS In each case, u: µ, for example: uA...: µA... , uPA... , µPA... , uPB... , µPB... , µPC... , µPC... , uPD..., µPD... • Abbreviation AR : Argentine model AUS : Australian model BR : Brazilian model CH : Chinese model CND : Canadian model EE : East European model HK : Hong Kong model J : Japanese model JE : Tourist model KR : Korea model NE : North European model TW : Taiwan model • Language that can be selected about SY-154 board GP1Jz

US CND

GP2zzzzzz

AUS

Vietnam

AEP

GP3zzzzzzzzzzzzzzz

UK E AR BR TW

GP4zzzzzzzzz

JE HK CH KR

5-1 Area Japanese English French German Spanish Italian Portugal Simplified Chinese Traditional Chinese Arabic Dutch Russian Swedish Korean Norwegian Danish Finnish Polish Hungarian Czech Persian Thai, 5. REPAIR PARTS LIST 5-1. EXPLODED VIEWS DISASSEMBLY HARDWARE LIST 5-1-1. CABINET SECTION ns: not supplied56LCD Panel Section (See page 5-3) #26 (SILVER) #27 (BLACK) #20 (SILVER) #21 (BLACK) #20 (SILVER) #20 (SILVER) #21 (BLACK) #21 (BLACK) ns #20 (SILVER) #21 (BLACK) #20 (SILVER) #21 (BLACK) Ref. No. Part No. Description Ref. No. Part No. Description 1 X-2109-132-1 CABINET (F) ASSY (S) (SILVER) 5 X-2109-134-1 CABINET (B) ASSY (S) (SILVER) 1 X-2109-133-1 CABINET (F) ASSY (B) (BLACK) 5 X-2109-135-1 CABINET (B) ASSY (B) (BLACK) 2 2-676-233-01 SCREW, TRIPOD 6 2-676-274-01 WINDOW, LCD 3 2-676-269-01 CABINET (L) (SILVER) 3 2-676-269-11 CABINET (L) (BLACK) #20 2-635-591-31 SCREW (M1.4), NEW TRUSTAR P2 (Silver) #21 2-662-396-21 SCREW (M1.4), NEW, TRUSTAR, P2 (Black) 4 2-671-731-01 KEY, CURSOR (SILVER) #26 2-635-591-11 SCREW (M1.4), NEW TRUSTAR P2 (Silver) 4 2-671-731-11 KEY, CURSOR (BLACK) #27 2-662-396-11 SCREW (M1.4), NEW, TRUSTAR, P2 (Black) 5-2, 5. REPAIR PARTS LIST

DISASSEMBLY HARDWARE LIST

5-1-2. LCD PANEL SECTION #3 LCD901 #3 D901 Cabinet (Top) Section (See page 5-4) Ref. No. Part No. Description Ref. No. Part No. Description 51 1-479-668-11 CONTROL SW BLOCK (SW60610) (SILVER) D901 1-479-623-11 BLOCK, LIGHT GUIDE PLATE (2.5) 51 1-479-668-21 CONTROL SW BLOCK (SW60610) (BLACK) * 52 1-870-217-11 FP-427 FLEXIBLE BOARD LCD901 A-1185-814-A LCD SUB BLOCK ASSY 53 A-1178-792-A SW-479 BOARD, COMPLETE #3 2-660-401-01 SCREW (M1.7), NEW TRU-STAR, P2 (Red) 5-3 SW-479, 5. REPAIR PARTS LIST

DISASSEMBLY

5-1-3. CABINET (TOP) SECTION ns: not supplied (including RL-064 flexible board) ns 103 BT001 SP901 (Size: 5mm x 5mm) BT Holder Section (See page 5-5) ! : BT001 (BATTERY, LITHIUM SECONDARY) Board on the mount position. (See page 4-23.) Lens Block Section (See page 5-6)

CAUTION

Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. Note: For the part of 106: SHEET (55), ADHESIVE (2-685- 267-01), cut SHEET, ADHESIVE (2-649-300-01) into the desired length and use it. • Refer to page 5-1 for mark 0. Ref. No. Part No. Description Ref. No. Part No. Description 101 X-2109-136-1 LID ASSY (S), DC (SILVER) 104 A-1178-824-A MC-162 FLEXIBLE BOARD, COMPLETE 101 X-2109-137-1 LID ASSY (B), DC (BLACK) * 105 2-676-273-01 HOLDER, CAPACITOR (SILVER) 102 A-1178-698-A CABINET (T) BLOCK ASSY (S) * 105 2-676-273-11 HOLDER, CAPACITOR (BLACK) (including RL-064 flexible board) (SILVER) 106 Note SHEET, ADHESIVE 102 A-1178-699-A CABINET (T) BLOCK ASSY (B) (including RL-064 flexible board) (BLACK) 0BT001 1-756-539-11 BATTERY, LITHIUM SECONDARY 103 2-676-268-01 CABINET (R) (SILVER) SP901 1-826-403-11 LOUD SPEAKER (1.0CM) 103 2-676-268-11 CABINET (R) (BLACK) 5-4 MC-162, 5. REPAIR PARTS LIST

DISASSEMBLY HARDWARE LIST

5-1-4. BT HOLDER SECTION ns: not supplied BT901 DC- 156 154 105ns #5 E (Middle east, Gulf) #3 S 153Y-15 MIC9014 * Refer to the table of page 5-1 about language of SY-154 board. • Refer to page 5-1 for mark 0. Ref. No. Part No. Description Ref. No. Part No. Description 151 A-1185-818-A SY-154 BOARD, COMPLETE (SERVICE) (GP2) * 157 2-676-272-01 SUPPORT, SW 151 A-1187-402-A SY-154 BOARD, COMPLETE (SERVICE) (GP3) 151 A-1187-403-A SY-154 BOARD, COMPLETE (SERVICE) (GP4) * 158 2-676-276-01 SHEET, LCD INSULATING 152 2-676-216-01 LID, BT (SILVER) * 159 2-687-368-01 LABEL, FUSE RATING 152 2-676-216-11 LID, BT (BLACK) 0BT901 1-780-061-21 BATTERY TERMINAL BOARD MIC901 1-542-691-11 MICROPHONE BLOCK 153 X-2109-613-1 ASSY, BTH PRE 0154 A-1178-825-A DC-105 FLEXIBLE BOARD, COMPLETE #3 2-660-401-01 SCREW (M1.7), NEW TRU-STAR, P2 (Red) * 155 2-676-266-01 SUPPORT, DC FLEXIBLE #5 3-080-204-01 SCREW, TAPPING, P2 (Black) * 156 2-676-267-01 FRAME, MAIN 5-5, 5. REPAIR PARTS LIST

HARDWARE LIST

5-1-5. LENS BLOCK SECTION ns: not supplied ST-146 ns (including IC001 (CCD imager) and CD-628 flexible complete board) (Note 1, 2) #5 #28 201 205 (Note 3) 213 ns (Note 3) (Note 3) Note 1: CCD block assembly is including CD-628 flexible 202 complete board. (Note 3) Note 2: Be sure to read “Precuations for Replacement of Imager” on page 4-3. Note 3: Be sure to read “Exchange method of barrier assy” on page 2-6. • Refer to page 5-1 for mark 0. Ref. No. Part No. Description Ref. No. Part No. Description 201 A-1060-696-A LENS BLOCK ASSY 890 (J1) (Note 3) 0209 A-1178-823-A ST-146 FLEXIBLE BOARD, COMPLETE 202 3-091-427-01 RING (A), ORNAMENTAL (Note 3) 0210 1-479-690-11 FLASH UNIT 203 X-3954-476-1 BARRIER ASSY (Note 3) 204 3-086-156-31 TAPPING SCREW (P2) (Note 3) * 211 2-676-271-01 HOLDER, AF 205 2-021-317-01 MASK, LPF * 212 2-676-270-01 HOLDER, ST * 213 X-2109-138-1 FRAME ASSY, LENS 206 1-788-391-11 OPTICAL FILTER BLOCK (OFB-02-27) 207 2-021-318-01 SEALGOM 890 #5 3-080-204-01 SCREW, TAPPING, P2 (Black) 208 A-1178-700-A CCD BLOCK ASSY (including IC001 (CCD #28 3-348-998-61 SCREW (M1.4X4), TAPPING, PAN (Dark Silver) IMAGER) and CD-628 flexible complete board) (Note 1, 2) 5-6,

CD-628 DC-105 MC-162 RL-064 ST-146

5-2. ELECTRICAL PARTS LIST Ref. No. Part No. Description Ref. No. Part No. Description A-1178-700-A CCD BLOCK ASSY (Note 1) < LINE FILTER > (Not supplied) CD-628 FLEXIBLE BOARD, COMPLETE ******************************* LF001 1-456-583-21 COMMON MODE CHOKE COIL (CD-628 flexible complete board and IC001 are not supplied, but they are included in CCD block assy.) < RESISTOR > < CAPACITOR > R004 1-500-283-11 INDUCTOR, FERRITE BEAD (Note 2) R005 1-500-283-11 INDUCTOR, FERRITE BEAD (Note 2) C002 1-127-715-91 CERAMIC CHIP 0.22uF 10% 16V C005 1-125-777-11 CERAMIC CHIP 0.1uF 10% 10V C007 1-100-505-91 CERAMIC CHIP 0.1uF 20% 16V A-1178-698-A CABINET (T) BLOCK ASSY (S) (SILVER) C008 1-164-943-81 CERAMIC CHIP 0.01uF 10% 16V A-1178-699-A CABINET (T) BLOCK ASSY (B) (BLACK) (Not supplied) RL-064 FLEXIBLE BOARD, COMPLETE < IC > ******************************* (RL-064 flexible complete board and S002 (shutter) are not supplied, IC001 (Not supplied) ICX476CQZ-13 (Note 1) but they are included in cabinet (T) block assy.) IC002 8-753-230-85 IC CXA3691EN-T9 < SPEAKER > < TRANSISTOR > SP901 1-826-403-11 LOUD SPEAKER (1.0CM) Q002 6-550-119-01 TRANSISTOR DTC144EMT2L < BATTERY > < RESISTOR > 0BT001 1-756-539-11 BATTERY, LITHIUM SECONDARY R004 1-218-949-11 RES-CHIP 470 5% 1/16W R005 1-218-953-11 RES-CHIP 1K 5% 1/16W < DIODE > R010 1-218-981-11 RES-CHIP 220K 5% 1/16W D001 6-500-252-01 DIODE SML-512WWT86 (FLASH CHARGING/RECORD) 0 A-1178-825-A DC-105 FLEXIBLE BOARD, COMPLETE D002 6-501-030-01 DIODE SML-412MWT86 (POWER) ******************************* D003 6-501-030-01 DIODE SML-412MWT86 (AE/AF LOCK/SELF-TIMER) < BATTERY TERMINAL > < RESISTOR > 0BT901 1-780-061-21 BATTERY TERMINAL BOARD R001 1-216-829-11 METAL CHIP 4.7K 5% 1/10W < FERRITE BEAD > < SWITCH > FB001 1-414-228-11 INDUCTOR, FERRITE BEAD 0FB002 1-469-324-21 FERRITE, EMI (SMD) (2012) S001 1-786-157-31 TACTILE SWITCH (POWER) 0FB003 1-469-324-21 FERRITE, EMI (SMD) (2012) S002 (Not supplied) TACTILE SWITCH (SHUTTER) S003 1-786-179-31 SWITCH, PUSH (1KEY) (T (ZOOM)) < JACK > S004 1-786-157-11 SWITCH, TACTILE (N (PLAYBACK)) S005 1-786-180-31 SWITCH, PUSH (1KEY) (W (ZOOM)/INDEX) 0J001 1-817-331-11 DC JACK 5P (DC IN) < RESISTOR > 0 A-1178-823-A ST-146 FLEXIBLE BOARD, COMPLETE ******************************* R001 1-216-821-11 METAL CHIP 1K 5% 1/10W 0 1-479-690-11 FLASH UNIT A-1178-824-A MC-162 FLEXIBLE BOARD, COMPLETE < CAPACITOR > ******************************* (CN001 (multi connector) is not supplied, but this is included in C002 1-100-611-91 CERAMIC CHIP 22uF 20% 6.3V MC-162 flexible complete board.) C003 1-100-506-91 CERAMIC CHIP 1uF 20% 6.3V C004 1-125-777-11 CERAMIC CHIP 0.1uF 10% 10V < CONNECTOR > 0C005 1-100-758-11 CERAMIC CHIP 0.047uF 10% 250V CN001 (Not supplied) CONNECTOR, MULTIPLE (SOCKET) CAUTION Danger of explosion if battery is incorrectly replaced. < DIODE > Replace only with the same or equivalent type. D001 6-500-776-01 DIODE MAZW068H0LS0 Note 1: Be sure to read “Precautions for Replacement of D002 6-500-776-01 DIODE MAZW068H0LS0 Imager” on page 4-3 when changing the imager. D003 8-719-083-91 DIODE EDZ TE61 6.8B Note 2: Ferrite beads are mounted to the location where R004 and R005 are printed. • Refer to page 5-1 for mark 0. 5-7,

ST-146 SW-479

Ref. No. Part No. Description Ref. No. Part No. Description C006 1-100-761-21 CERAMIC CHIP 0.01uF 10% 250V < RESISTOR > 0* C007 1-114-120-11 CAP, ELECT 145uF 330V R001 1-208-927-11 METAL CHIP 47K 0.5% 1/16W < DIODE > R003 1-208-927-11 METAL CHIP 47K 0.5% 1/16W 0D002 6-501-141-01 DIODE FT02P80TP R004 1-218-989-11 RES-CHIP 1M 5% 1/16W 0D003 6-500-811-01 DIODE RR255L-400TE25 R005 1-218-990-81 SHORT CHIP 0 * D004 6-501-364-01 DIODE DOR5352 R006 1-218-974-11 RES-CHIP 56K 5% 1/16W (SELF-TIMER/AF ILLUMINATOR) R007 1-218-990-81 SHORT CHIP 0 < IC > R010 1-218-990-81 SHORT CHIP 0 R011 1-218-990-81 SHORT CHIP 0 IC001 6-707-555-01 IC TPS65552RGTR R050 1-218-961-11 RES-CHIP 4.7K 5% 1/16W R051 1-218-961-11 RES-CHIP 4.7K 5% 1/16W < COIL > R052 1-218-961-11 RES-CHIP 4.7K 5% 1/16W * L001 1-400-820-11 INDUCTOR 2.2uH R053 1-218-961-11 RES-CHIP 4.7K 5% 1/16W R054 1-218-961-11 RES-CHIP 4.7K 5% 1/16W < TRANSISTOR > R055 1-218-961-11 RES-CHIP 4.7K 5% 1/16W 0Q001 6-550-656-01 TRANSISTOR CY25BAJ-8F-T23 < SWITCH > < RESISTOR > S050 1-786-157-31 TACTILE SWITCH (V (SELF-TIMER)) S051 1-786-157-31 TACTILE SWITCH (SCREEN DISPLAY) 0R001 1-216-121-11 RES-CHIP 1M 5% 1/10W S052 1-786-157-31 TACTILE SWITCH (B (MACRO)) R002 1-243-975-11 METAL CHIP 4.7M 5% 1/16W S053 1-786-157-31 TACTILE SWITCH (IMAGE SIZE/DELETE) R003 1-218-935-11 RES-CHIP 33 5% 1/16W S054 1-786-157-31 TACTILE SWITCH (v (FLASH)) R004 1-216-097-11 RES-CHIP 100K 5% 1/10W S055 1-786-157-31 TACTILE SWITCH (MENU) < TRANSFORMER > S056 1-786-157-31 TACTILE SWITCH (b (IMAGE BRIGHTNESS (EV))) 0T002 1-443-568-21 TRANSFORMER, D.C.-D.C.CONVERTER S057 1-786-157-31 TACTILE SWITCH (z (SET)) A-1178-792-A SW-479 BOARD, COMPLETE *********************** Electrical parts list of the SY-154 board is not shown. < CAPACITOR > Pages 5-9 to 5-11 are not shown. C001 1-137-710-11 CERAMIC CHIP 10uF 20% 6.3V C002 1-100-743-91 CERAMIC CHIP 2.2uF 20% 16V C003 1-100-743-91 CERAMIC CHIP 2.2uF 20% 16V C004 1-100-743-91 CERAMIC CHIP 2.2uF 20% 16V C005 1-100-743-91 CERAMIC CHIP 2.2uF 20% 16V C006 1-100-743-91 CERAMIC CHIP 2.2uF 20% 16V C007 1-100-743-91 CERAMIC CHIP 2.2uF 20% 16V C008 1-100-743-91 CERAMIC CHIP 2.2uF 20% 16V C010 1-100-743-91 CERAMIC CHIP 2.2uF 20% 16V C011 1-137-710-11 CERAMIC CHIP 10uF 20% 6.3V C012 1-112-021-91 CERAMIC CHIP 2.2uF 20% 16V C020 1-164-943-81 CERAMIC CHIP 0.01uF 10% 16V < CONNECTOR > * CN001 1-817-564-51 CONNECTOR, FPC (ZIF) 33P CN002 1-817-544-51 CONNECTOR, FPC (ZIF) 39P * CN003 1-816-654-51 FFC/FPC CONNECTOR (LIF) 6P * CN004 1-816-654-51 FFC/FPC CONNECTOR (LIF) 6P < DIODE > D001 8-719-069-29 DIODE RB520S-30TE61 D002 8-719-069-29 DIODE RB520S-30TE61 < COIL > L001 1-400-588-11 INDUCTOR, LAMINATE CHIP 10uH • Refer to page 5-1 for mark 0. 5-8,

Checking supplied accessories. Other accessories

2-674-774-11 INSTRUCTION (READ THIS FIRST) (ENGLISH) (AEP, UK, E, HK, AUS, JE) 2-674-774-21 INSTRUCTION (READ THIS FIRST) (FRENCH, ITALIAN) (AEP) Battery Charger Battery Charger 2-674-774-31 INSTRUCTION (READ THIS FIRST) BC-CSG BC-CSG (SPANISH, PORTUGUESE) (AEP, E, JE) 0 1-479-583-21 0 1-479-583-31 2-674-774-41 INSTRUCTION (READ THIS FIRST) (GERMAN, DUTCH) (US, CND) (EXCEPT US, CND) (AEP) 2-674-774-51 INSTRUCTION (READ THIS FIRST) (TRADITIONAL CHINESE, SIMPLIFIED CHINESE) (E, HK, CH, JE) 2-674-774-61 INSTRUCTION (READ THIS FIRST) (RUSSIAN) (AEP) 2-674-774-71 INSTRUCTION (READ THIS FIRST) USB, A/V Cable for Power Cord (ARABIC, PERSIAN) (E) Multiuse Terminal 0 1-555-074-71 (AUS) 2-674-774-81 INSTRUCTION (READ THIS FIRST) (KOREAN) (KR, JE) 1-829-866-41 0 1-782-476-41 (CH) 2-674-774-91 INSTRUCTION (READ THIS FIRST) (CZECH, POLISH) 0 1-783-374-22 (HK) (AEP) 0 1-792-549-31 (JE) 2-674-775-11 INSTRUCTION (READ THIS FIRST) 0 1-823-947-51 (KR) (HUNGARIAN, SLOVAK) (AEP) 0 1-824-910-31 (AEP, E) 0 1-827-269-22 (UK) 2-674-775-21 INSTRUCTION (READ THIS FIRST) (SWEDISH, FINNISH) (AEP) 2-674-775-31 INSTRUCTION (READ THIS FIRST) (NORWEGIAN, DANISH) (AEP) 2-674-776-11 INSTRUCTION (READ THIS FIRST) (ENGLISH) (US, CND) 2-674-776-21 INSTRUCTION (READ THIS FIRST) (FRENCH, ITALIAN) (CND) Rechargeable Battery Pack Battery Case 2-674-788-11 INSTRUCTION (USER'S GUIDE) NP-BG1 (not supplied) (ENGLISH) (EXCEPT KR, CH) (not supplied) 2-674-788-21 INSTRUCTION (USER'S GUIDE) (FRENCH, ITALIAN) (CND, AEP) 2-674-788-31 INSTRUCTION (USER'S GUIDE) (SPANISH, PORTUGUESE) (AEP, E, JE) 2-674-788-41 INSTRUCTION (USER'S GUIDE) (GERMAN, DUTCH) (AEP) 2-674-788-51 INSTRUCTION (USER'S GUIDE) (TRADITIONAL CHINESE, SIMPLIFIED CHINESE) Wrist Strap CD-ROM (E, HK, CH, JE) 2-050-981-01 (Cyber-shot Application Software) 2-666-673-01 2-674-788-61 INSTRUCTION (USER'S GUIDE) (RUSSIAN) (AEP) 2-674-788-71 INSTRUCTION (USER'S GUIDE) (ARABIC, PERSIAN) (E) 2-674-788-81 INSTRUCTION (USER'S GUIDE) (KOREAN) (KR, JE) 2-674-788-91 INSTRUCTION (USER'S GUIDE) (CZECH, POLISH) (AEP) 2-674-790-11 INSTRUCTION (USER'S GUIDE) (HUNGARIAN, SLOVAK) (AEP) Conversion (2P) Adaptor Conversion (2P) Adaptor 2-674-790-21 INSTRUCTION (USER'S GUIDE) 0 1-569-007-12 (JE) 0 1-569-008-12 (E) (SWEDISH, FINNISH) (AEP) 2-674-790-31 INSTRUCTION (USER'S GUIDE) (NORWEGIAN, DANISH) (AEP) • Refer to the page 5-1 for mark 0. 5-12E,

HARDWARE LIST (1/2)

#1: M1.7 X 2.5 #2: M1.7 X 4.0 #3: M1.7 X 2.5 #4: M1.4 X 2.5 (Tapping) (Black) (Black) (Red) (Dark Silver) 2-635-562-11 2-635-562-31 2-660-401-01 3-348-998-81 1.7 1.7 1.7 1.4 2.5 4.0 2.5 2.5 #5: M1.7 X 3.5 (Tapping) #6: M1.4 X 1.7 #7: M1.7 X 1.6 #8: M1.7 X 3.5 (Tapping) (Black) (Silver) (Black) (Silver) 3-080-204-01 2-598-474-01 7-627-552-18 3-078-890-01 1.7 1.4 1.7 1.7 3.5 1.7 1.6 3.5 #9: M1.7 X 5.0 (Tapping) #10: M1.7 X 4.0 #11: M1.7 X 4.0 (Tapping) #12: M1.7 X 5.0 (Tapping) (Silver) (Silver) (Silver) (Black) 3-078-890-21 2-599-475-31 3-078-890-11 3-080-204-21 1.7 1.7 1.7 1.7 5.0 4.0 4.0 5.0 #13: M1.7 X 2.5 (Tapping) #14: M1.7 X 2.5 #15: M1.4 X 1.5 #16: M1.4 X 2.5 (Silver) (Silver) (Silver) (Silver) 3-085-397-01 2-599-475-11 3-062-214-01 2-586-337-01 1.7 1.7 1.4 1.4 2.5 2.5 1.5 2.5 #17: M1.7 X 1.5 #18: M1.4 X 2.5 #19: M1.2 X 4.0 (Tapping) #20: M1.4 X 3.0 (Silver) (Silver) (Red) (Silver) 2-586-389-01 2-635-591-21 3-086-156-21 2-635-591-31 1.7 2.2 1.4 1.2 1.4 1.5 2.5 4.0 3.0 3.5,

HARDWARE LIST (2/2)

#21: M1.4 X 3.0 #22: M1.7 X 5.0 (Tapping) #23: M1.7 X 4.0 (Tapping) #24: B1.7 X 5.5 (Tapping) (Black) (Silver) (Black) (Black) 2-662-396-21 3-083-261-01 3-080-204-11 4-679-805-11 1.4 1.7 1.7 1.7 3.0 5.0 4.0 5.5 #25: M1.7 X 3.0 #26: M1.4 X 2.0 #27: M1.4 X 2.0 #28: M1.4 X 4.0 (Tapping) (Black) (Silver) (Black) (Dark Silver) 2-635-562-21 2-635-591-11 2-662-396-11 3-348-998-61 1.7 1.4 1.4 1.4 3.0 2.0 2.0 4.0, [Description of main button functions on toolbar of the Adobe Acrobat Reader Ver5.0 (for Windows)] Toolbar Printing a text Reversing the screens displayed once 1. Click the Print button . • To reverse the previous screens (operation) one by one, click 2. Specify a printer, print range, number of copies, and other op- the . tions, and then click [OK]. • To advance the reversed screens (operation) one by one, click the . Application of printing: To set a range to be printed within a page, select the graphic Application to the Service Manual: selection tool and drag on the page to enclose a range to This function allows you to go and back between circuit dia- be printed, and then click the Print button. gram and printed circuit board diagram, and accordingly it will be convenient for the voltage check. Finding a text 1. Click the Find button . Moving with link 2. Enter a character string to be found into a text box, and click the [Find]. (Specify the find options as necessary) 1. Select either palm tool , zoom tool , text selection tool , or graphic selection tool . Application to the Service Manual: 2. Place the pointer in the position in a text where the link exists To execute “find” from current page toward the previous pages, (such as a button on cover and the table of contents page, or select the check box “Find Backward” and then click the blue characters on the removal flowchart page or drawing “Find”. page), and the pointer will change to the forefinger form . 3. Then, click the link. (You will go to the link destination.) Moving with bookmark: Click an item (text) on the bookmark pallet, and you can move to the link destination. Also, clicking can display the hidden items. (To go back to original state, click ) 3. Open the find dialog box again, and click the [Find Again] and you can find the matched character strings displayed next. (Character strings entered previously are displayed as they are in the text box.) Application to the Service Manual: The parts on the drawing pages (block diagrams, circuit dia- grams, printed circuit boards) and parts list pages in a text can be found using this find function. For example, find a Ref. No. of IC on the block diagram, and click the [Find Again] continuously, so that you can move to the Ref. No. of IC on Zooming or rotating the screen display the circuit diagram or printed circuit board diagram succes- “Zoom in/out” sively. • Click the triangle button in the zoom control box to select the Note: The find function may not be applied to the Service display magnification. Or, you may click or for zoom- Manual depending on the date of issue. ing in or out. Switching a page • To move to the first page, click the . • To move to the last page, click the . “Rotate” • To move to the previous page, click the . • Click rotate tool , and the page then rotates 90 degrees each. • To move to the next page, click the . Application to the Service Manual: The printed circuit board diagram you see now can be changed to the same direction as the set.,

Reverse 987694134.pdf Revision History

Ver. Date History Contents S.M. Rev. issued 1.0 2006.03 Official Release — — 1.1 2006.07 Supplement-1 • Addition of LCD Type (TYPE SA) No (S1 DI06-024) • Addition and Change of Repair Parts 1.2 2006.10 Supplement-2 • Change of Repair Parts No (S2 DI06-123) • Change of Board’s Suffix No. 1.3 2007.04 Supplement-3 • Change of ST-146 Flexible Board’s Suffix No (S3 DI07-005) No. • Change of Repair Parts]
15

Similar documents

• Addition of Argentine Model (W1)
DSC-W1/W12 SERVICE MANUAL LEVEL 1 DSC-W1 Ver 1.1 2004.05 US Model Canadian Model Revision History Hong Kong Model Australian Model Argentine Model Chinese Model Brazilian Model Tourist Model Japanese Model DSC-W1/W12 AEP Model UK Model E Model Korea Model Photo: DSC-W1/Silver Link SPECIFICATIONS SEL
• Addition of Argentine Model (W1)
DSC-W1/W12 SERVICE MANUAL LEVEL 1 DSC-W1 Ver 1.2 2004.08 US Model Canadian Model Revision History Hong Kong Model Australian Model Argentine Model Brazilian Model Tourist Model Japanese Model DSC-W1/W12 AEP Model UK Model E Model Chinese Model Korea Model Photo: DSC-W1/Silver Link SPECIFICATIONS SEL
Model information table
DSC-W30/W40 SERVICE MANUAL LEVEL 3 US Model Ver 1.0 2006.01 Canadian Model Revision History AEP Model UK Model E Model How to use Acrobat Reader Australian Model Hong Kong Model Chinese Model Internal memory Korea Model ON BOARD Argentine Model Brazilian Model Japanese Model Tourist Model Photo: DSC
SPECIFICATIONS Camera [LCD screen] BC-CSG battery charger
DSC-W30/W40 SERVICE MANUAL LEVEL 2 US Model Ver 1.0 2006.01 Canadian Model Revision History AEP Model UK Model E Model How to use Acrobat Reader Australian Model Hong Kong Model Chinese Model Internal memory Korea Model ON BOARD Argentine Model Brazilian Model Japanese Model Tourist Model Photo: DSC
SPECIFICATIONS Camera [LCD screen] BC-CSG battery charger
DSC-W30/W40 SERVICE MANUAL LEVEL 2 US Model Ver 1.1 2006.07 Canadian Model Revision History AEP Model UK Model E Model How to use Acrobat Reader Australian Model Hong Kong Model Chinese Model Internal memory Korea Model ON BOARD Argentine Model Brazilian Model Japanese Model Tourist Model Photo: DSC
SPECIFICATIONS Camera [Power, general]
DSC-W35 SERVICE MANUAL LEVEL 2 US Model Ver 1.1 2007.03 Canadian Model Revision History AEP Model UK Model How to use E Model Acrobat Reader Australian Model Hong Kong Model Internal memory Chinese Model ON BOARD Korea Model Argentine Model Brazilian Model Japanese Model Link SPECIFICATIONS BLOCK DI
CAUTION Danger of explosion if battery is incorrectly replaced.
DSC-W50 SERVICE MANUAL LEVEL 3 US Model Ver 1.0 2006.01 Canadian Model Revision History AEP Model UK Model How to use Acrobat Reader E Model Australian Model Hong Kong Model Internal memory Chinese Model ON BOARD Korea Model Argentine Model Photo: Silver Tourist Model Link SERVICE NOTE PRINTED WIRIN
SPECIFICATIONS Camera [LCD screen] BC-CSG battery charger
DSC-W50 SERVICE MANUAL LEVEL 2 US Model Ver 1.0 2006.01 Canadian Model Revision History AEP Model UK Model How to use Acrobat Reader E Model Australian Model Hong Kong Model Internal memory Chinese Model ON BOARD Korea Model Argentine Model Photo: Silver Tourist Model Link SPECIFICATIONS BLOCK DIAGR
SPECIFICATIONS Camera [Power, general]
DSC-W55 SERVICE MANUAL LEVEL 2 US Model Ver 1.1 2007.03 Canadian Model Revision History AEP Model UK Model How to use E Model Acrobat Reader Australian Model Hong Kong Model Internal memory Chinese Model ON BOARD Korea Model Argentine Model Brazilian Model Photo: Silver Tourist Model Link SPECIFICAT
SPECIFICATIONS Camera [Input and Output connectors] BC-CS2A/CS2B Ni-MH battery charger
DSC-W5/W7/W15/W17 SERVICE MANUAL LEVEL 2 DSC-W5/W7 Ver 1.0 2005.01 US ModelCanadian Model Argentine Model Revision History Brazilian Model Japanese Model DSC-W5/W7/W15/W17 AEP Model How to use UK ModelE Model Acrobat Reader Australian ModelHong Kong Model Korea Model Tourist Model DSC-W5/W7/W15 Chin
SPECIFICATIONS Camera [Input and Output connectors] BC-CS2A/CS2B Ni-MH battery charger
DSC-W5/W7/W15/W17 SERVICE MANUAL LEVEL 2 DSC-W5/W7 Ver 1.1 2005.07 US ModelCanadian Model Argentine Model Revision History Brazilian Model Japanese Model DSC-W5/W7/W15/W17 AEP Model How to use UK ModelE Model Acrobat Reader Australian ModelHong Kong Model Korea Model Tourist Model DSC-W5/W7/W15 Chin
SPECIFICATIONS Camera [Input and Output connectors] BC-CS2A/CS2B Ni-MH battery charger
DSC-W5/W7/W15/W17 SERVICE MANUAL LEVEL 2 DSC-W5/W7 Ver 1.2 2005.09 US ModelCanadian Model Argentine Model Revision History Brazilian Model Japanese Model DSC-W5/W7/W15/W17 AEP Model How to use UK ModelE Model Acrobat Reader Australian ModelHong Kong Model Korea Model Tourist Model DSC-W5/W7/W15 Chin
TABLE OF CONTENTS
DSC-W5/W7/W15/W17 SERVICE MANUAL LEVEL 3 DSC-W5/W7 Ver 1.0 2005.01 US ModelCanadian Model Argentine Model Revision History Brazilian Model Japanese Model DSC-W5/W7/W15/W17 AEP Model How to use UK ModelE Model Acrobat Reader Australian ModelHong Kong Model Korea Model Tourist Model DSC-W5/W7/W15 Chin
SPECIFICATIONS Camera [LCD screen] BC-CSG battery charger
DSC-W70 SERVICE MANUAL LEVEL 2 US Model Ver 1.0 2006.03 Canadian Model Revision History AEP Model UK Model How to use Acrobat Reader E Model Australian Model Hong Kong Model Internal memory Chinese Model ON BOARD Korea Model Argentine Model Photo: Silver Tourist Model Link SPECIFICATIONS BLOCK DIAGR
DSC-W80HDPR SERVICE MANUAL US Model AEP Model E Model Australian Model Hong Kong Model Chinese Model Korean Model
DSC-W80HDPR SERVICE MANUAL US Model Ver. 1.0 2007.03 Canadian Model AEP Model E Model Australian Model Hong Kong Model Chinese Model Korean Model [About the service of this model] DSC-W80HDPR is a commondity that packed the Digital Still Camera and Digital Photo Printer Kit. Refer to each following
CAUTION Danger of explosion if battery is incorrectly replaced.
DSC-W70 SERVICE MANUAL LEVEL 3 US Model Ver 1.0 2006.03 Canadian Model Revision History AEP Model UK Model How to use E Model Acrobat Reader Australian Model Hong Kong Model Chinese Model Internal memory Korea Model ON BOARD Argentine Model Tourist Model Photo: Silver Link SERVICE NOTE PRINTED WIRIN
SPECIFICATIONS Camera [Input and Output connectors] Microphone: Monaural
DSC-W80/W85 SERVICE MANUAL LEVEL 2 US Model Ver. 1.0 2007.03 Canadian Model Revision History AEP Model UK Model How to use E Model Acrobat Reader Australian Model Hong Kong Model Chinese Model Internal memory Korea Model ON BOARD Argentine Model Brazilian Model Japanese Model Photo: Silver Tourist M
SPECIFICATIONS Camera [Input and Output connectors] BC-CSG/BC-CSGB/BC-CSGC
DSC-W90 SERVICE MANUAL LEVEL 2 US Model Ver. 1.0 2007.02 Canadian Model Revision History AEP Model UK Model How to use E Model Acrobat Reader Australian Model Hong Kong Model Chinese Model Internal memory Korea Model ON BOARD Argentine Model Brazilian Model Photo: Silver Link SPECIFICATIONS BLOCK DI
CAUTION If you have any questions about this product,
MVC-CD350 SERVICE MANUAL LEVEL 1 US Model Ver 1.0 2003. 04 Revision History Link SPECIFICATIONS SELF DIAGNOSIS FUNCTION ORNAMENTAL PARTS • INSTRUCTION MANUAL is shown at the end of this document. DIGITAL STILL CAMERA MVC-CD350 COVER SPECIFICATIONS xCamera xAC-L15A/L15B AC Adaptor [System] [Input and
Storage temperature NP-FM50 battery pack Table for difference of functions
MVC-CD200/CD300 SERVICE MANUAL US ModelCanadian Model Level 2 Ver 1.0 2001. 05 AEP Model UK Model E Model Hong Kong Model Australian Model Chinese Model Tourist Model Korea Model Photo : MVC-CD300 Japanese Model This service manual contains information for japanese model as well. On the SY-67 board
CAUTION WARNING This symbol is intended to alert You are cautioned that any changes or
MVC-CD500 SERVICE MANUAL LEVEL 1 US Model Ver 1.0 2003. 04 Canadian Model Revision History AEP Model UK Model E Model Australian Model Japanese Model Link SPECIFICATIONS SELF DIAGNOSIS FUNCTION ORNAMENTAL PARTS • INSTRUCTION MANUAL is shown at the end of this document. DIGITAL STILL CAMERA MVC-CD500
MVC-FD81 SERVICE MANUAL US Model Canadian Model AEP Model E Model Australian Model Hong Kong Model Tourist Model Chinese Model DIGITAL STILL CAMERA
MVC-FD81 SERVICE MANUAL US Model Canadian Model AEP Model Ver 1.0 1998.09 UK Model E Model Australian Model Hong Kong Model Tourist Model Chinese Model SPECIFICATIONS DIGITAL STILL CAMERA MICROFILM CD-206 BOARD CAMERA REC 1 IC431 1,3 78µsec 9.5Vp-p 2 IC431 2,4 µ 9.5Vp-p78 sec 3 IC431 8 1.8Vp-p 78µse
S® Training Manual Digital Camera Sony Mavica Cameras MVC-FD85 Troubleshooting & Circuit Descriptions Course: DSC-01
S® Training Manual Digital Camera Sony Mavica Cameras Models: MVC-FD85 MVC-FD90 MVC-FD95 MVC-FD85 Troubleshooting & Circuit Descriptions Course: DSC-01 Table of Contents Introduction Floppy Disc Drive 41 Common Failures 1 Checking for Floppy Disc Drive Voltage 41 Purpose of this book 1 Checking the
MVC-FD71 SERVICE MANUAL US Model Canadian Model AEP Model UK Model Ver 1.3 2000. 09 E Model With SUPPLEMENT-1 Australian Model (9-974-076-81) Hong Kong Model
MVC-FD71 SERVICE MANUAL US Model Canadian Model AEP Model UK Model Ver 1.3 2000. 09 E Model With SUPPLEMENT-1 Australian Model (9-974-076-81) Hong Kong Model Tourist Model SPECIFICATIONS DIGITAL STILL CAMERA MICROFILM • Floppy disk that can be used by the MVC-FD71 • Size : 3.5-inch • Type : 2 HD • C
MVC-FD75 SERVICE MANUAL US Model Canadian Model AEP Model UK Model Ver 1.0 2001. 01 E Model Hong Kong Model Australian Model Brazilian Model DIGITAL STILL CAMERA
MVC-FD75 SERVICE MANUAL US Model Canadian Model AEP Model UK Model Ver 1.0 2001. 01 E Model Hong Kong Model Australian Model Brazilian Model SPECIFICATIONS DIGITAL STILL CAMERA • Floppy disk that can be used by the MVC-FD75 • Size : 3.5-inch • Type : 2 HD • Capacity : 1.44 MB • Format : MS-DOS forma
LCD screen Mass (Approx.) NP-F330 battery pack
MVC-FD87/FD92 SERVICE MANUAL US Model Canadian Model Level 2 AEP Model UK Model E Model Ver 1.1 2001. 06 Hong Kong Model Australian Model Korea Model Japanese Model PHoto: MVC-FD92 This service manual contains information for Japanese model as well. When the machine needs to be repaired, please refe
AVR055: Using a 32kHz XTAL for run-time calibration of the internal RC
AVR055: Using a 32kHz XTAL for run-time calibration of the internal RC Features • Calibration using a 32 kHz external crystal • Adjustable RC frequency with maximum +/-2% accuracy • Tune RC oscillator at any operating voltage and temperature • Tune RC oscillator to any frequency within specification
8-bit RISC Microcontroller Application Note
8-bit RISC Microcontroller Application Note Rev. 1981A–AVR–03/05 AVR155: Accessing an I2C LCD Display using the AVR® 2-wire Serial Interface Features • Compatible with Philips' I2C protocol • 2-wire Serial Interface Master Driver for Easy Transmit and Receive Function • Initialization and Use ofa2x1
AVR107: Interfacing AVR serial memories
AVR107: Interfacing AVR serial memories Features • Devices: AT25128A/256A, AT25F1024/2048/4096 • Full Serial Memory Functions Support • Memory Array Burst Read • Page Burst Write • Write Protection Detection • On Going Access Detection • Non-blocking Write Access • Access Status Information 1 Introd
AVR120: Characterization and Calibration of the ADC on an AVR
AVR120: Characterization and Calibration of the ADC on an AVR Features • Understanding Analog to Digital Converter (ADC) characteristics • Measuring parameters describing ADC characteristics • Temperature, frequency and supply voltage dependencies • Compensating for offset and gain error Introductio