Download: CAUTION If you have any questions about this product,
MVC-CD350 SERVICE MANUAL LEVEL 1 US Model Ver 1.0 2003. 04 Revision History Link SPECIFICATIONS SELF DIAGNOSIS FUNCTION ORNAMENTAL PARTS • INSTRUCTION MANUAL is shown at the end of this document. DIGITAL STILL CAMERA MVC-CD350 COVER SPECIFICATIONS xCamera xAC-L15A/L15B AC Adaptor [System] [Input and Output connectors] Power requirements Image device A/V OUT (MONO) (Monaural) 100 – 240 V AC, 50/60 Hz 6.67 mm (1/2.7 type) color CCD Minijack Current consumption Primary color filter Video: 1 Vp-p, 75Ω , unbalanced, 0.35 – 0.18 A Total pixels number of camera sync negative Power consumption Approx....
Author: Tucker Shared: 8/19/19
Downloads: 843 Views: 1826
MVC-CD350 SERVICE MANUAL LEVEL 1US Model Ver 1.0 2003. 04 Revision History Link SPECIFICATIONS SELF DIAGNOSIS FUNCTION ORNAMENTAL PARTS • INSTRUCTION MANUAL is shown at the end of this document.
DIGITAL STILL CAMERA,
MVC-CD350 COVER SPECIFICATIONSxCamera xAC-L15A/L15B AC Adaptor [System] [Input and Output connectors] Power requirements Image device A/V OUT (MONO) (Monaural) 100 – 240 V AC, 50/60 Hz 6.67 mm (1/2.7 type) color CCD Minijack Current consumption Primary color filter Video: 1 Vp-p, 75Ω , unbalanced, 0.35 – 0.18 A Total pixels number of camera sync negative Power consumption Approx. 3 338 000 pixels Audio: 327 mV (at a 47 kΩ load) 18 W
ΩEffective pixels number of camera Output impedance 2.2 k Output voltage Approx. 3 207 000 pixels USB jack mini-B 8.4 V DC, 1.5 A Lens 3 zoom lens [LCD screen] Operating temperature f = 6.4 – 19.2 mm (9/32 – 0°C to +40°C (32°F to +104°F) 25/32 inches) (41 – 123 mm (1 5/8 – LCD panel Storage temperature 4 7/8 inches) when converted to a 6.2 cm (2.5 type) TFT drive –20°C to +60°C (–4°F to +140°F) 35 mm still camera Total number of dots Dimensions (approx.) F3.8 – 3.9 123 200 (560 × 220) dots 56 × 31 × 100mm Exposure control (2 1/4 × 1 1/4 × 4 inches) (w/h/d) Automatic exposure, Scene selection [General] excluding projecting parts (7 modes) Used battery pack Mass (approx.) White balance NP-FM50 190 g (6.7 oz) excluding power cord Automatic, Daylight, Cloudy, Fluorescent, Incandescent, Flash Power requirements 7.2 V xNP-FM50 battery pack File format (DCF compliant) Still images: Exif Ver. 2.2 JPEG Power consumption (during shooting with Used battery compliant, GIF (for Clip Motion), LCD backlight on) Lithium-ion battery TIFF, DPOF compatible 2.6 W Maximum voltage Audio with still image: Operating temperature DC 8.4 V MPEG1 compliant (Monaural) 0°C to +40°C (32°F to +104°F) Nominal voltage Movies: Storage temperature DC 7.2 V MPEG1 compliant (Monaural) –20°C to +60°C (4°F to +140°F) Capacity 8.5 Wh (1 180 mAh) Recording media Dimensions 8 cm CD-R/CD-RW 131.7 × 92.3 × 73.8 mm xAccessories Flash Recommended distance (ISO set to (5 1/43 × 3/43 inches) Auto): 0.8 m to 2.5 m (31 1/2 inches (W/H/D, excluding maximum AC Adaptor (1) to 8 feet 2 7/16 inches) protrusions) Power cord (1) Mass Approx. 522 g (1 lb 2 oz) (including USB cable (1) [Drive] battery pack NP-FM50, disc, and lens NP-FM50 battery pack (1) Readout Non-contact optical readout (using cap) A/V connecting cable (1) semiconductor laser) Built in microphone Electret condenser microphone 8 cm CD adaptor (1)Laser Wavelength: 779 to 789 nm Maximum output: 23 mW Built-in speaker Mavica disc (2) (CD-R (1), CD-RW (1)) Dynamic speaker Shoulder strap (1) Exif print Compatible Lens cap (1) Print Image Matching II Compatible Lens cap strap (1) CD-ROM (SPVD-010) (1) Operating instructions (1) Design and specifications are subject to change without notice. — 2 —,
MVC-CD350WARNING!! CAUTION: WHEN SERVICING, DO NOT APPROACH THE LASER The use of optical instrument with this product will increase eye EXIT WITH THE EYE TOO CLOSELY. IN CASE IT IS hazard. NECESSARY TO CONFIRM LASER BEAM EMISSION, BE SURE TO OBSERVE FROM A DISTANCE OF MORE CAUTION THAN 30 cm FROM THE SURFACE OF THE Use of controls or adjustments or performance OBJECTIVE LENS ON THE OPTICAL PICK-UP BLOCK. procedures other than those specified herein may result in hazardous radiation exposure. CAUTION : Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. SAFETY-RELATED COMPONENT WARNING!! ATTENTION AU COMPOSANT AYANT RAPPORT À LA SÉCURITÉ! COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE WITH LES COMPOSANTS IDENTIFÉS PAR UNE MARQUE 0 SUR LES MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU PUBLISHED BY SONY. DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.
SAFETY CHECK-OUTAfter correcting the original service problem, perform the following safety checks before releasing the set to the customer. 1. Check the area of your repair for unsoldered or poorly-soldered Unleaded solder connections. Check the entire board surface for solder splashes Boards requiring use of unleaded solder are printed with the lead- and bridges. free mark (LF) indicating the solder contains no lead. 2. Check the interboard wiring to ensure that no wires are (Caution: Some printed circuit boards may not come printed with the lead free mark due to their particular size.) "pinched" or contact high-wattage resistors. 3. Look for unauthorized replacement parts, particularly transistors, that were installed during a previous repair. Point : LEAD FREE MARK them out to the customer and recommend their replacement. Unleaded solder has the following characteristics. 4. Look for parts which, through functioning, show obvious signs • Unleaded solder melts at a temperature about 40°C higher than of deterioration. Point them out to the customer and ordinary solder. recommend their replacement. Ordinary soldering irons can be used but the iron tip has to be applied to the solder joint for a slightly longer time. 5. Check the B+ voltage to see it is at the values specified. Soldering irons using a temperature regulator should be set to 6. Flexible Circuit Board Repairing about 350°C. • Keep the temperature of the soldering iron around 270˚C Caution: The printed pattern (copper foil) may peel away if the during repairing. heated tip is applied for too long, so be careful! • Do not touch the soldering iron on the same conductor of the • Strong viscosity circuit board (within 3 times). Unleaded solder is more viscous (sticky, less prone to flow) than • Be careful not to apply force on the conductor when soldering ordinary solder so use caution not to let solder bridges occur such or unsoldering. as on IC pins, etc. • Usable with ordinary solder It is best to use only unleaded solder but unleaded solder may also be added to ordinary solder. — 3 —,
MVC-CD350Checking supplied accessories. Make sure that the following accessories are supplied with your camcorder. Power cord (Main lead)(1) AC power adaptor (1) 8 cm CD adaptor Shoulder strap (1) 0 1-790-107-22 (AC-L15A/L15B) (D adaptor) (1) 3-071-638-01 0 1-477-533-31 3-063-085-01 (Fig. A) A/V connecting cable CD-ROM USB cable (1) NP-FM50 battery (Fig. B) (1.5m) (1) (SPVD-010(I)) (1) 1-827-038-11 pack (1) 1-824-111-11 3-078-943-03 (not supplied) (Fig. A) Lens cap (1) (X-3953-430-1) (Fig. B) Lens cap strap (1) 3-067-797-01
Other accessories Note : The components identified by mark 0 or dotted3-081-835-11 MANUAL, INSTRUCTION(ENGLISH) line with mark 0 are critical for safety. Replace only with part number specified. — 4 —,
MVC-CD350COVER SELF-DIAGNOSIS FUNCTION [Description on Self-diagnosis Display] Self-diagnosis display • C: ss: ss The contents which can be handled by customer, are displayed. • E: ss: ss The contents which can be handled by engineer, are displayed. Display Code Countermeasure Cause Caution Display During Error Change the disk and turn off the main C:32:01 Defective base unit. DRIVE ERROR power then back on. • The type of CD-R/RW disk that cannot C:13:01 Replace the CD-R/RW disk. be used by this machine, is inserted. DISK ERROR • Data is damaged. Flash LED Checking of flash unit or replacement of Abnormality when flash is being E:91:01 Flash display flash unit charged. Flashing at 3.2 Hz *1 E:61:00 Checking of lens drive circuit When failed in the focus initialization. — *1 E:61:10 Note: The error code is cleared if the battery is removed. *1 : The error display is given in two ways. — 5 —,
MVC-CD350COVER MAIN PARTS Note: • Follow the disassembly procedure in the numerical order given. • Items marked “*” are not stocked since they are seldom required for routine service. Some delay should be anticipated when ordering these items. • The parts numbers of such as a cabinet are also appeared in this section. Refer to the parts number mentioned below the name of parts to order. 1. ORNAMENTAL PARTS Jack cover 3-082-802-01 CPC lid 3-073-661-21 — 6 —,
MVC-CD3509-876-225-41 Sony EMCS Co. 2003D1600-1 ©2003.4 — 8 — Published by DI Customer Center, 3-081-835-11(1) Getting started _
Digital Still Camera Shooting still images _Viewing still images _
Operating InstructionsBefore operating the unit, please read this manual thoroughly, and Deleting still images _ retain it for future reference.
Owner’s Record Before advanced operations _The model and serial numbers are located on the bottom. Record the serial number in the space provided below. Refer to these numbers Advanced still image shooting_ whenever you call upon your Sony dealer regarding this product. Model No. MVC-CD350 Advanced still image viewing_ Serial No. Still image editing _ Enjoying movies_ Enjoying images on your computer _ Troubleshooting _ Additional information _
MVC-CD350Index _ © 2003 Sony Corporation, CAUTION If you have any questions about this product,
WARNING The use of optical instruments with this you may call:product will increase eye hazard. Sony Customer Information Center To prevent fire or shock hazard, do Use of controls or adjustments or 1-800-222-SONY (7669) not expose the unit to rain or moisture. performance of procedures other than those The number below is for the FCC related matters specified herein may result in hazardous only. radiation exposure.
Regulatory Information Declaration of ConformityTrade Name: SONY Model No.: MVC-CD350 Responsible Party: Sony Electronics Inc. Address: 680 Kinderkamack Road, Oradell, NJ 07649 USA Telephone No.: 201-930-6972 This symbol is intended to alert This device complies with Part 15 of the the user to the presence of FCC Rules. Operation is subject to the uninsulated “dangerous following two conditions: (1) This device voltage” within the product’s may not cause harmful interference, and enclosure that may be of (2) this device must accept any interference sufficient magnitude to received, including interference that may constitute a risk of electric cause undesired operation. shock to persons. This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.,
CAUTION RECYCLING LITHIUM-ION CAUTIONYou are cautioned that any changes or BATTERIES TO PREVENT ELECTRIC SHOCK, DO NOT modifications not expressly approved in this Lithium-Ion batteries are USE THIS POLARIZED AC PLUG WITH AN manual could void your authority to operate this recyclable. EXTENSION CORD, RECEPTACLE OR equipment. You can help preserve our OTHER OUTLET UNLESS THE BLADES environment by returning your CAN BE FULLY INSERTED TO PREVENT
Note: used rechargeable batteries to BLADE EXPOSURE.This equipment has been tested and found to the collection and recycling location nearest comply with the limits for a Class B digital you. device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable For more information regarding recycling of protection against harmful interference in a rechargeable batteries, call toll free residential installation. This equipment generates, 1-800-822-8837, or visit uses, and can radiate radio frequency energy and, http://www.rbrc.org/ if not installed and used in accordance with the instructions, may cause harmful interference to Caution:Do not handle damaged or leaking radio communications. However, there is no Lithium-Ion batteries. guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: — Reorient or relocate the receiving antenna. — Increase the separation between the equipment and receiver. — Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. — Consult the dealer or an experienced radio/ TV technician for help. The shielded interface cable recommended in this manual must be used with the equipment in order to comply with the limits for a disital device pursuant to Subpart B of Part 15 of FCC Rules.,
Before using your cameraThis digital still camera uses 8 cm CD-Rs/CD- No compensation for contents of the Do not shake or strike the camera RWs as recording media. “CD-R” or “CD-RW” recording In addition to malfunctions and inability to record mentioned above is indicated as “disc” in this Contents of the recording cannot be compensated images, this may render the discs unusable or manual. When a distinction between CD-Rs and for if recording or playback is not possible due to image data breakdown, damage or loss may CD-RWs is necessary, “disc” is indicated as a malfunction of your camera or recording media, occur. “CD-R” or “CD-RW.” etc. Refer to page 18 for discs that can be used with LCD screen, LCD finder (only models this camera, and page 108 for precautions on handling discs. Back up recommendation with an LCD finder) and lens To avoid the potential risk of data loss, always • The LCD screen and the LCD finder are copy (back up) data to a disk. manufactured using extremely high-precision • We recommend that you use technology so over 99.99% of the pixels are this camera with Mavica Notes on image data compatibility operational for effective use. However, there discs*. • This camera conforms with the Design rule for may be some tiny black points and/or bright Camera File system universal standard points (white, red, blue or green in color) that • While the image is being established by the JEITA (Japan Electronics constantly appear on the LCD screen and the read from or written to the and Information Technology Industries LCD finder. These points are normal in the manufacturing process and do not affect the disc, the ACCESS lamp Association). • Playback of images recorded with your camera recording in any way. flashes (red). When this on other equipment and playback of images • Be careful when placing the camera near a lamp is lit, do not shake or recorded or edited with other equipment on window or outdoors. Exposing the LCD screen, strike the camera. your camera are not guaranteed. the finder or the lens to direct sunlight for long periods may cause malfunctions. ∗ The Mavica disc is an 8 cm CD-R/CD-RW • Do not press the LCD screen hardly. The screen Precaution on copyright with the Mavica logo. may be uneven and that may cause a Television programs, films, video tapes, and other malfunction. materials may be copyrighted. Unauthorized Trial recording • Images may be trailed on the LCD screen in a recording of such materials may be contrary to cold location. This is not a malfunction. Before you record one-time events, you may want the provision of the copyright laws. to make a trial recording to make sure that the camera is working correctly., Clean the flash surface before use Notes on the camera locations Trademarks The heat of flash emission may cause dirt on the • Do not use the camera near a location that • “InfoLITHIUM” is a trademark of Sony flash surface to become discolored or to stick to generates strong radio wave or emits radiation. Corporation. the flash surface, resulting in insufficient light The camera may not be able to record or play • Microsoft and Windows are registered emission. back properly. trademarks of the U.S. Microsoft Corporation • Do not use the camera near a TV, radio, tuner. in the United States and other countries. Do not get the camera wet Noise may be caused on the camera. • Macintosh and Mac OS are trademarks or When taking pictures outdoors in the rain or registered trademarks of Apple Computer, Inc. under similar conditions, be careful not to get the The pictures used in this manual • Pentium is a trademark or a registered camera wet. If moisture condensation occurs, see The photographs used as examples of pictures in trademark of Intel Corporation. page 108 and follow the instructions on how to this manual are reproduced images, and are not • In addition, system and product names used in remove it before using the camera. actual images shot using this camera. this manual are, in general, trademarks or registered trademarks of their respective developers or manufacturers. However, the ™ Do not expose the camera to sand or or ® marks are not used in all cases in this dust manual. Using the camera in sandy or dusty locations may cause malfunction. Do not aim the camera at the sun or other bright light This may cause irrecoverable damage to your eyes. Or it may cause the malfunction of your camera.,
Table of contentsBefore using your camera ... 4 Viewing still images Adjusting the exposure Introduction... 8 — EV adjustment ...46 Identifying the parts ... 9 Viewing images on the LCD screen of your Selecting the metering mode...47 camera ... 31 Adjusting color tones
Getting started Viewing images on a TV screen... 33 — White Balance ...48Charging the battery pack ... 11 Adjusting the flash level Deleting still images Using an external power source... 14 — Flash Level ...49 Using your camera abroad ... 14 Deleting images ... 35 Shooting multiple frames Turning on/off your camera... 15 Formatting a CD-RW ... 38 — Clip Motion ...50 How to use the control button... 15 Shooting in Multi Burst mode Setting the date and time... 16 Before advanced operations — Multi Burst...51 How to setup and operate your camera .. 40 Shooting two images continuously
Shooting still images Changing the menu settings ... 40 — Burst 2 ...52Inserting and removing a disc ... 18 Changing the items in the SET UP Shooting still images in TIFF mode Initializing a disc... 19 screen ... 40 — TIFF ...53 What is initialization?... 19 Deciding the still image quality... 41 Shooting still images for e-mail Setting the still image size ... 20 Creating or selecting a folder ... 41 — E-Mail ...53 Image size and quality ... 21 Creating a new folder ... 42 Shooting still images with audio files Basic still image shooting Changing the recording folder ... 42 — Voice...54 — Auto adjustment mode... 22 Shooting according to scene conditions Checking the last image you shot Advanced still image — Scene Selection...55 — Quick Review ... 24 shooting Adding special effects Using the zoom feature... 24 Choosing an auto focus method ... 43 — Picture Effect ...57 Shooting close-ups — Macro ... 25 Choosing a focus range finder frame Confirming whether to record images Using the self-timer ... 26 — AF range finder ... 43 — Confirm before write ...57 Selecting a flash mode... 27 Choosing a focus operation Indicators on the screen during — AF Mode ... 44 shooting ... 29 Setting the distance to the subject Inserting the date and time on a still — Focus preset ... 46 image ... 30,
Advanced still image viewing Enjoying movies Copying images using the Windows XPAutoPlay Wizard...86 Selecting the folder and playing back Shooting movies ... 70 Viewing images on your computer ...87 images Viewing movies on the LCD screen... 71 Creating a Video CD...87 — Folder...59 Deleting movies — Delete... 72 For Mac OS X (v10.0/v10.1/v10.2) Enlarging a portion of a still image...60 users ...87 Enlarging an image Enjoying images on your — Playback zoom...60 computer Troubleshooting Recording an enlarged image Viewing images on your computer Troubleshooting ...88 — Trimming ...61 — Introduction ... 74 Warnings and messages ...96 Playing back successive images Viewing images using CD-ROM drive .. 75 Self-diagnosis display ...98 — Slide Show...61 Finalizing a disc... 75 Rotating still images What is finalization?... 75 Additional information — Rotate...62 Canceling finalization (Unfinalize) Playing back images shot in Multi Burst Number of images that can be saved or (CD-RW only)... 76 mode ...63 shooting time...99Using the supplied 8cm CD adapter... 77 Playing back continuously ...63 Menu items...101Viewing images through a CD-ROM Playing back frame by frame SET UP items ...105drive... 78 — Jog playback ...63 Precautions ...107Image file storage destinations and On discs ...108
Still image editing image file names ... 79 On “InfoLITHIUM” battery pack ...109Copying images into your computer Specifications ...111 Protecting images through a USB connection ... 81 The LCD screen ...113 — Protect...65 Installing the PTP Manager ... 81 Changing image size Installing “ImageMixer”... 83 Index — Resize...67 Connecting the camera to your Choosing images to print Index...116computer... 83 — Print (DPOF) mark ...67 Copying images ... 85 When the PTP Manager does not start up ... 86,
IntroductionThis digital still camera is capable of Flow chart for disc operations recording still images and movies onto 8 cm Start : CD-R CD-R/CD-RW discs. : CD-RW
Capture images with your A new disccomputer You can easily copy images onto your Initialize computer through a CD-ROM drive or the (page 19) Recording is complete. USB cable, and view and modify images on Preparation for recording on a disc your computer using application software. View on the camera (page 31) When using a CD-ROM drive to view images on your computer, finalization is Record required (page 75). Disc preparation for View on a computer recording is complete. Finalize (page 74) (page 75) Preparation for viewing recorded images on a computer View through the USB cable (pages 81, 87) Unfinalize The disc status is (page 76) pre-finalization. About 13 MB disc space is restored. View through a CD-ROM drive (page 75) Format Blank disc (page 38) Disc preparation for The disc space is fully viewing recorded images available. through a CD-ROM drive is complete.,
Identifying the parts • Use a tripod with a screw length of less than 5.5mm (7/32 inch). You will be unable to firmly secure the camera to tripods having longer See the pages in parentheses for details of operation. screws, and may damage the camera. • Do not touch the microphone while recording. • The “3.2 MEGA PIXELS” indicated on the18camera shows the number of effective pixels. The number of actually recorded pixels is29maximum 3.1 MEGA PIXELS. The effective pixels number is determined according to the30recommendation of the JCIA (Japan Camera Industry Association). 4 qa 6 qs Attaching the qd shoulder strap 7 qf qg A POWER button (15) J Hook for lens cap/shoulder strap B POWER lamp (15) K Disc cover OPEN lever (18) C Shutter button (22) L Lens cap D Microphone M A/V OUT (MONO) jack (33) E Lens N (USB) jack (84) F Battery cover (11) O DC IN jack (11, 14) G Tripod receptacle (bottom surface) H Flash emitter (27) I Self-timer lamp (26)/ AF illuminator (28, 105), J Hook for shoulder strap K Zoom button (for shooting) (24)/ Index button (for viewing) (32) 19L(Image Size/Delete) 2 button (20, 35) 4 q; qa 8 qs A ACCESS lamp (18) I Mode dial (16) B /CHG (charge) lamp (12) : To shoot still images in auto C LCD screen adjustment mode D Speaker : To shoot still images in E Control button programmed mode (Menu on) (v/V/b/B/z) SCN: To shoot in the Scene (Menu off) ( / /7/ ) (27, 26, Selection mode 24, 25) SET UP: To set the SET UP items F MENU button (40, 101) : To shoot movies, Clip G DISPLAY ON/OFF button (29) H RESET button (bottom surface) Motion images or Multi (88) Burst mode images : To view or edit images,
Getting started Charging the battery packDC IN jack cover DC plug12Battery eject lever 3 AC Adaptor , Open the battery cover. , Install the battery pack, then , Open the DC IN jack cover and close the battery cover. connect the AC Adaptor Slide the cover in the direction of the arrow. (supplied) to the DC IN jack of Insert the battery pack with the b mark • Be sure to turn off your camera when facing toward the battery compartment as your camera. charging the battery pack (page 15). illustrated. • Your camera operates only with the Connect the DC plug with the v mark “InfoLITHIUM” NP-FM50 battery pack (M Make sure the battery pack is firmly facing forward. series) (supplied) (page 109). inserted all the way, then close the cover. • Do not short the DC plug of the AC Adaptor • The battery pack is easily inserted by pushing with a metallic object, as this may cause the battery eject lever at the front of the battery malfunction. compartment up. • Clean the DC plug of the AC Adaptor with a dry cotton bud. Do not use the dirty plug. Use of the dirty plug may not properly charge the battery pack. Getting started,
To remove the battery pack Battery remaining indicator2 To wall outlet The battery remaining indicator on the LCD screen shows the remaining shooting or viewing Power cord time. 60min 3.1M 101 M AF 4 AC Adaptor Battery eject lever , Connect the power cord to the
AC Adaptor and then to a wall Open the battery cover. Slide the battery • The black portion of the battery remainingoutlet. eject lever in the direction of the arrow, and indicator in the illustration shows the actual remove the battery pack. remaining time. The /CHG lamp (orange) lights up when • The displayed remaining time may not be correct under certain circumstances or charging begins, and goes off when • Be careful not to drop the battery pack when conditions. charging is completed. removing it.
Charging timeApproximate time to charge a completely discharged battery pack using the AC Adaptor at a temperature of 25°C (77°F). /CHG lamp Battery pack Charging time (min.) NP-FM50 (supplied) Approx. 150 • After charging the battery pack, disconnect the AC Adaptor from the DC IN jack of your camera.,
Number of images and battery Shooting still images Shooting movies3)life that can be recorded/ Under the average conditions1) NP-FM50 (supplied) viewed NP-FM50 (supplied) Battery life (min.) Image size No. of Battery life The tables show the approximate number of Continuous shooting Approx. 150images (min.) images and the battery life that can be recorded/ viewed when you shoot images in normal mode 3.1M Approx. 270 Approx. 135 3) Shooting continuously at 160 (Mail) image size with a fully charged battery pack at a temperature VGA Approx. 290 Approx. 145 of 25°C (77°F). The numbers of images that can 1) Shooting in the following situations: • The number of images and the battery life that be recorded or viewed take into account changing – [P. Quality] is set to [Fine] can be recorded/viewed are decreased under the the supplied disc as necessary. Note that the actual – Shooting one time every 30 seconds following conditions: numbers may be less than indicated depending on – The zoom is switched alternately between – The surrounding temperature is low the conditions of use. the W and T ends – The flash is used – The flash strobes once every two times – The camera has been turned on and off many – The power turns on and off once every ten times times – The zoom is used frequently – [AF Mode] is set to [Monitor] in the SET – [LCD Backlight] is set to [Bright] in the SET UP settings UP settings – The battery power is low. The battery capacity decreases as you use it
Viewing still images2) more and more and as time passes (page 110).NP-FM50 (supplied) – [AF Mode] is set to [Cont] in the SET UP settings Image size No. of Battery life images (min.) 3.1M Approx. 1900 Approx. 160 VGA Approx. 2000 Approx. 170 2) Viewing single images in order at about five second intervals Getting started,
Using an external power source Using your cameraabroad Power sources 2 To wall outlet You can use your camera in any country or region with the supplied AC Adaptor within Power cord 100 V to 240 V AC, 50/60 Hz. Use a commercially available AC plug adaptor DC IN jack cover [a], if necessary, depending on the design of DC plug 1 the wall outlet [b]. 1 AC Adaptor AC-L15A/L15BAC Adaptor 2 , Open the DC IN jack cover and , Connect the power cord to the connect the AC Adaptor AC Adaptor and then to a wall • Do not use an electronic transformer (travel (supplied) to the DC IN jack of outlet. converter), as this may cause a malfunction. your camera. • When you have finished using the AC Adaptor, Connect the DC plug with the v mark disconnect it from the DC IN jack of the facing forward. camera. • The set is not disconnected from the AC power • Connect the AC Adaptor to an easily accessible source as long as it is connected to the wall wall outlet close by. If any trouble occurs while outlet, even if the unit itself has been turned off. using the adaptor, immediately shut off the power by disconnecting the plug from the wall outlet.,
Turning on/off your camera How to use thecontrol button
Auto power-off function POWERIf you do not operate the camera for about POWER button 0EV three minutes during shooting or viewing or when performing SET UP, the camera turns 0EV EV WB ISO POWER lamp off automatically to prevent wearing down the battery. The auto power-off function only operates when the camera is operating using a battery pack. The auto power-off 400 function also will not operate in the Auto WB ISO following circumstances. • When viewing movies , Press POWER. To change the current settings of the • When a connector is plugged into the camera, bring up the menu or the SET UP The POWER lamp (green) lights up and the (USB) jack or the A/V OUT (MONO) screen (page 40), and use the control button power is on. When you turn on your camera jack. to make the changes. for the first time, the Clock Set screen For each item, press v/V/b/B to select the appears (page 16). desired value, then press the center z or v/V/b/B to make the setting. Turning off the power Press POWER again. The POWER lamp goes out, and the camera turns off. Getting started,
Setting the date and timeMode dial Clock Set Y/M/D Clock Set Y/M/D M/D/Y M/D/Y POWER D/M/Y D/M/Y 2003 / 1 / 1 12 : 00 OK 2003 / 1 / 1 12 : 00 OK AM AM Cancel Cancel OK OK POWER button123, Set the mode dial to . , Press POWER to turn on the , Select the desired date display power. format with v/V on the control • You can also carry out this operation when the button, then press z. mode dial is set to , SCN, or . The POWER lamp (green) lights up and the • To change the date and time, set the mode dial Clock Set screen appears on the LCD Select from [Y/M/D] (year/month/day), to SET UP, select [Clock Set] in (Setup 1) screen. 1 [M/D/Y] (month/day/year) or [D/M/Y] (page 106), and perform the procedure from step . (day/month/year).3 • If the rechargeable button battery, which provides the power for saving the time data, is ever fully discharged (page 108), the Clock Set screen will appear again. When this happens, reset the date and time, by starting from step 3 above., Clock Set Y/M/D Clock Set Y/M/D Clock Set Y/M/D M/D/Y M/D/Y M/D/Y D/M/Y D/M/Y D/M/Y 2003 / 1 / 1 12 : 00 OK 2003 / 7 / 1 12 : 00 OK 2003 / 7 / 4 10 : 30 OK AM AM AM Cancel Cancel Cancel OK OK OK456, Select the year, month, day, , Set the numeric value with v/V , Select [OK] with B on the hour or minute item you want on the control button, then control button, then press z. to set with b/B on the control press z to enter it. The date and time are entered and the clock button. After entering the number, v/V moves to starts to keep time. The item to be set is indicated with v/V. the next item. Repeat this step until all of the items are set. • To cancel the date and time setting, select [Cancel] with v/V/b/B on the control button, then press z. • If you selected [D/M/Y] in step 3, set the time on a 24-hour cycle. Getting started,
Shooting still images Inserting and removing a discDisc cover OPEN lever Pickup lens Disc12Push here 3 , Open the disc cover. , Place a disc in the disc tray. , Close the disc cover. Slide down the disc cover OPEN lever, and Place the disc with the printed side up, and Removing the disc open the disc cover. push down on the center of the disc until it Open the disc cover. Check to make sure that the clicks. disc has completely stopped rotating, then remove the disc. • You can use only 8 cm CD-R/CD-RW discs that have these marks. • Do not forcibly push on the disc. • When the ACCESS lamp is flashing, it • Do not touch the pickup lens. means that image data is being read or written. Never open the disc cover or turn off the power at this time, as the • For details on disc, see page 108. image data may be damaged or the disc may become unusable. • While the camera is writing data on a disc, the disc cover OPEN lever is locked. • After you change the disc, “Repairing Data” may appear on the LCD screen and it may take about 10 minutes to prepare the disc for recording depending on the disc condition.,
Initializing a disc What is initialization? Mode dialInitialize Initialize Initialize Avoid any vibration Avoid any vibration Initialization is required to record images Ready to initialize Initialize in progress Initialize complete on a disc. When you perform finalization (page 75) using your camera to view images through a CD-ROM drive, initialization is also automatically performed, and you can continue to record images. Images recorded before finalization remain on the disc. 1 2 , Insert a new disc and set the , Select [OK] with v on the mode dial to , then turn on control button, then press z. the power. Initialization starts. Do not shake or strike “Initialize Place on level surface” appears the camera during initialization. on the LCD screen. To cancel initialization Select [Cancel] with V on the control button, then press z. After canceling the initialization, open and close the disc cover, then perform the procedure from step 1. • You can also carry out this operation when the mode dial is set to , SCN or . • You can also perform initialization using (Disc Tool 1) in the SET UP settings (page 105). Shooting still images,
Setting the still image sizeMode dial 3.1M VGA 3.1M 2.8M(3:2) 3.1M 2.0M 2.8M(3:2)2.0M 1.2M 1.2M VGA VGA Image Size Image Size123, Set the mode dial to and , Press (Image Size). , Select the desired image size turn on the power. with v/V on the control button. The Image Size setup appears. The image size is set. • You can also carry out this operation when the • For details on the image size, see page 21. mode dial is set to or SCN. When the setting is complete, press (Image Size) so that the Image Size setup disappears from the LCD screen. • The image size selected here is maintained even when the power is turned off.,
Image size and qualityYou can choose image size (number of The number of images that can • The “3.2 MEGA PIXELS” indicated on the pixels) and image quality (compression be saved in a supplied CD-R2) camera shows the number of effective pixels. ratio) based on the kind of images you want The number of actually recorded pixels is (Units: images) to shoot. The larger you make the image maximum 3.1 MEGA pixels. size and the higher you make the image Quality 3) • When images recorded using earlier Sony Fine Standard models are played back on this camera, the quality, the better your image, but also the display may differ from the actual image size. larger the amount of data needed to preserve Image size • When the images are viewed on the LCD your image. This means you can save fewer 3.1M 81 145 screen of the camera, they all look the same images in your disc. 2.8M(3:2) 81 145 size. Choose an image size and quality level • Number of shooting images can differ from 2.0M 131 234 appropriately for the kind of images you these values according to shooting conditions. want to shoot. 1.2M 194 345 • When the number of remaining shooting You can resize the images later (Resize images is greater than 9999, the >9999 VGA 655 1285 indicator appears on the LCD screen. function, see page 67). 2) When [REC Mode] is set to [Normal] You can choose image size from among the For the number of images that can be saved in five options in the following tables. The other modes, see page 99. 3) below image size is a minimum setting for For more information about the image quality examples. When you want to improve mode, see page 41. image quality, select the larger image size. Image size Examples 3.1M 2048×1536 Printing A4 size images 2.8M(3:2) 2048 (3:2) 3:2 prints1) 2.0M 1632×1224 Printing A5 size images 1.2M 1280×960 Printing postcard size images VGA 640×480 Creating home pages 1) This option records images in a horizontal to vertical proportion of 3:2 to match the size of the print paper used. Shooting still images,
Basic still image shooting — Auto adjustment modeMode dial 60min 3.1M FINE 101 M AF F3.8 AE/AF lock indicator Flashes green123tLights up , Set the mode dial to , and , Hold the camera steadily with , Press and hold the shutter turn on the power. both hands and position the button halfway down. subject in the center of the The name of the folder where the image will The beep sounds. When the AE/AF lock be recorded appears on the LCD screen for focus frame. indicator changes from flashing to steadily approximately five seconds. Do not cover the lens or flash with your lit, the camera is ready for shooting. fingers. (The LCD screen may be frozen for a split • This camera can create new folders and select second depending on the subject.) folders to be stored in the disc (page 41). • The minimum focal distance to the subject is 50 cm (19 3/4 inches) at the W end and 80 cm • If you release the shutter button, the recording (31 1/2 inches) at the T end. To shoot even will be canceled. closer subjects, use macro recording mode • When the camera does not beep, the AF (page 25). adjustment is not complete. You can continue to shoot, but the AF is not set properly (except in Continuous AF). • The frame appearing on the LCD screen shows the focus adjustment range. (For more details on the AF range finder frame, see page 43.),
Mode dial for still image Auto Focus60min 3.1M 101 95 shooting When you try to shoot a subject that is M AF When shooting still images with your difficult to focus on, the AE/AF lock camera, you can choose from the following indicator changes to flashing slowly. shooting methods. The Auto Focus function may have difficulty working under the following (Auto adjustment mode) conditions. In such cases, release the shutter The focus, exposure and white balance are button, then recompose the shot and focus 4 automatically adjusted to allow easy again. shooting. The image quality is set to [Fine] • The subject is distant from the camera
Press the shutter button fully (page 41).and dark. , • The contrast between the subject and its down. (Program auto shooting) background is poor.
The shutter sounds. The image will be You can set the desired shooting functions • The subject is seen through glass, such asrecorded in the disc. When ACCESS lamp using menus (pages 40 and 101). a window. (page 10) goes out, you can shoot the • A fast-moving subject. next image. SCN (Scene Selection) • The subject reflects or has a lustrous You can select from the following modes to finish, such as a mirror or a luminous • When operating the camera using a battery pack, if you do not operate the camera for about shoot according to the scene conditions body. three minutes during recording, the camera (page 55). • A flashing subject. turns off automatically to prevent wearing – (Twilight mode) • A backlit subject. down the battery (page 15). • While the image is being recorded on the disc, – (Twilight portrait mode) There are two Auto Focus functions: “AF the ACCESS lamp flashes. Do not shake or – (Landscape mode) range finder frame” which sets the focus strike the camera while this lamp is flashing. – (Soft snap mode) Also do not turn off the power, remove the position according to the subject position – (Snow mode) battery pack, or open the disc cover at this time, and size, and “AF mode” which sets the as the data may be damaged or the disc may – (Beach mode) focus operation according to the AF become unusable. – (High-speed shutter mode) response and the battery consumption. See page 43 for details. Shooting still images,
Checking the last image you Using the zoom featureshot — Quick Review 60min 3.1M 101 8/8 W (wide-angle) T (telephoto) Review 60min VGA 101 60min VGA 101 96 96 x1.1 M AF x3.0 M AF 101-0029 20037410:30PM
RETURN, Press b (7) on the control , Press the zoom button to button. choose the desired zoom position for shooting. To return to the normal shooting mode, press lightly on the shutter button or press b ( ) again. Minimum focal distance to the 7 subject To delete the image displayed on the When the zoom is set to the W side: screen Approx. 50 cm (19 3/4 inches) from the lens surface 1 Press (Delete). When the zoom is set to the T side: 2 Select [Delete] with v on the control Approx. 80 cm (31 1/2 inches) from the lens button, then press z. surface The image is deleted.,
Shooting close-ups — Macro Smart zoom The maximum zoom scale depends on theDigital processing lets you zoom in the image size. image without deterioration. [2.0M]: 3.8× When the zoom exceeds 3×, enlargement is [1.2M]: 4.8× carried out using the smart zoom. When the [VGA]: 9.6× smart zoom is not needed, set [Smart Zoom] When the image size is [3.1M] or to [Off] in the SET UP settings (page 105). [2.8M(3:2)], the smart zoom does not When you press the zoom button, the zoom work. scaling indicator appears on the LCD screen. • When using the smart zoom, the image on the LCD screen may look rough. However, this Zoom scaling indicator phenomenon has no effect on the recorded The macro recording mode is used when image. zooming up a small subject, such as flowers The T side of this line shows • AF range finder is not shown when using the the extent of smart zoom smart zoom. When 9 (Focus) is set to [Multi or insects. You can shoot close-ups of AF] or [Center AF], or flashes and the subjects up to the distances specified below. centrally-located subject has priority to focus on. When the zoom is set all the way to x2.5 the W side: Approx. 3 cm (1 3/16 inches) from the lens surface When the zoom is set all the way to the T side: Approx. 80 cm (31 1/2 inches) from the lens surface Shooting still images,
Using the self-timer60min 3.1M 101 60min 3.1M FINE 101 60min 3.1M 101 96 95 96 M AF M AF M AF F3.8121, Set the mode dial to , and , Center the subject in the frame, , Turn the mode dial to , and press B ( ) on the control and press the shutter button press V ( ) on the control button. fully down. button. The (macro) indicator appears on the To return to normal recording mode The (self-timer) indicator appears on the screen. Press B ( ) on the control button again. LCD screen. The indicator disappears. • If the menu is currently displayed, press MENU • If the menu is currently displayed, press MENU first so that the menu disappears. first so that the menu disappears. • You can also carry out this operation when the • You can also carry out this operation when the mode dial is set to , SCN (other than mode dial is set to , SCN or . (Twilight mode) or (Landscape mode), page 55) or .,
Selecting a flash mode• If the menu is currently displayed, press MENU 60min 3.1M FINE 101 60min 3.1M 101 96 first so that the menu disappears.96 M AF M AF • You can also carry out this operation when the F3.8 mode dial is set to , SCN ( Soft snap 30 mode) or (Clip Motion). • The recommended shooting distance using the flash is approximately 0.8 m to 2.5 m (31 1/2 inches to 8 feet 2 7/16 inches) (when [ISO] is set to [Auto]). • You can change the brightness of the flash with 2 [Flash Level] in the menu settings (page 102). (You cannot change the brightness of the flash while the mode dial is set to .) , Center the subject in the frame, , Set the mode dial to , and • When using the SL (Slow synchro) or (No and press the shutter button press v ( ) on the control flash) mode, the shutter speed becomes slower fully down. button repeatedly to select a in dark places, so using a tripod is recommended. flash mode. The self-timer lamp (page 9) flashes and a • While charging the flash, the /CHG lamp flashes. After the charging is complete, the beep sounds after you press the shutter Each time you press v ( ), the indicator lamp goes out. button until the shutter operates changes as follows. • When you press the shutter button halfway (approximately 10 seconds). No indicator (Auto): The flash down while the flash is strobing, the /CHG automatically strobes when shooting lamp turns on. To cancel the self-timer in the middle images in a dark place or against a light • Attaching a conversion lens (not supplied) may of the operation block the light from the built-in flash or cause source. the lens shadow to appear. Press V ( ) on the control button again. (Forced flash): The flash strobes • This setting is maintained even when the power The indicator disappears from the LCD regardless of the surrounding brightness. is turned off. screen. SL (Slow synchro): The flash strobes regardless of the surrounding brightness. • If you press the shutter button while standing in The shutter speed is slow in a dark place, so front of the camera, the focus and the exposure you can clearly shoot the background that is may not be correctly set. out of flash light. (No flash): The flash does not strobe. Shooting still images,
When shooting images against To reduce the red-eye Recording images with the AFa light source phenomenon when shooting illuminator If the flash is set to Auto (no indicator), live subjects The AF illuminator is fill light to focus shooting against a light source Set [Red Eye Reduction] to [On] in the SET more easily on a subject in dark automatically flashes even when there is UP settings (page 105). indicator surroundings. When not using this function, enough light around the subject (Daylight appears on the LCD screen, and the flash set [AF Illuminator] to [Off] in the SET UP synchro). pre-strobes before shooting to reduce the settings (page 105). red-eye phenomenon. ON appears on the screen and the AF Before flashed illuminator emits red light when the shutter button is pressed halfway until the focus is locked. 60min 3.1MFINE 101 M AF ON F3.8 m 30 When flashed • Red-eye reduction may not produce the desired effects depending on individual differences, the distance to the subject, if the subject does not • The best performance may not be given see the pre-strobe, or other conditions. depending on shooting conditions. • When you do not want to use the flash, set the flash mode to (No flash).,
Indicators on the screen during shooting• If the AF illuminator light does not reach the • For a detailed description of the indicators, see subject sufficiently or the subject has weak page 113. contrast, focus will not be achieved. (An • The setting selected here is maintained even approximate distance of 0.3 m to 2.3 m (11 7/8 when the power is turned off. inches to 7 feet 6 1/2 inches) is recommended.) • Focus is achieved as long as AF illuminator light reaches the subject, even if the light is slightly off the center of the subject. • When the focus preset distance is set (page 46), the AF illuminator does not function. • The AF illuminator emits very bright light. DISPLAY ON/OFF Although there are no problems with safety, directly looking into the AF illuminator at close range is not recommended. Each time you press DISPLAY ON/OFF, • When 9 (Focus) is set to [Multi AF] or the display changes in the following order. [Center AF], the AF range finder is not displayed. or flashes and the centrally- Indicators on located subject has priority to focus on. 60min 3.1M 101 • The AF illuminator does not operate when SCN 96 M AF is set to (Twilight mode) or (Landscape mode) in the menu settings (page 55). r Indicators off M AF Shooting still images,
Inserting the date and time on a still imageCamera Camera Camera Moving Image : MPEG Movie Moving Image : Moving Image : MPEG Movie111AF Mode : Monitor AF Mode : Day&Time AF Mode : Monitor 2 Smart Zoom : On 2 Smart Zoom : Date 2 Smart Zoom : On Date/Time : Off Date/Time : 1 Off Date/Time : Date1 1 Red Eye Reduction : Off Red Eye Reduction : Red Eye Reduction : Off 2 AF Illuminator : Auto 2 AF Illuminator : 2 AF Illuminator : Auto SELECT OK PAGE SELECT123, Set the mode dial to SET UP. , Select (Camera) with v on , Select the date and time setting the control button, then press with v/V on the control button,
The SET UP screen appears. B. then press z.• When images are shot with the date and time Select [Date/Time] with v/V, Day & Time: Superimposes the date, hour, superimposed, the date and time cannot be then press B. removed later. and minute onto the image. • The date and time do not appear on the LCD Date: Superimposes the year, month and screen during shooting, instead, “ ” appears • If you select [Date], the date is superimposed day onto the image. in the upper left corner of the LCD screen. The onto the image in the order selected in “Setting Off: Does not superimpose the date and actual date and time appear in red during the date and time” (page 16). time onto the image. playback only.
After the setting has been completed, set themode dial to , and shoot the image. • You can also superimpose the date and time with the mode dial set to or SCN. • This setting is maintained even when the power is turned off.,
Viewing still images Viewing images on the LCD screen of your Viewing single imagescamera Single (single-image) Index (nine-image) Index (triple-image) 60min VGA 101 8/9 screen screen screen 60min VGA 101 8/9 Aperture Value: F3.8 Shutter Speed: 1/30 101-0008 20037410:30PMBACK/NEXT VOLUME Exposure Value: 0.0 ISO: 100 101-0008 20037410:30PM SINGLE DISPLAY MOVE 101-0002 20037410:30PMBACK/NEXT VOLUME SINGLE DISPLAY BACK/NEXT You can view images shot with your camera • For a detailed description of the screen , Set the mode dial to , and almost immediately on the LCD screen. indicators, see page 113. turn on the power. You can select the following three methods • For details on viewing movies, see page 71. for viewing images. The last image in the selected recording folder (page 41) appears on the screen. Single (single-image) screen You can view one image at a time, displayed over the entire screen. Index (nine-image) screen Nine images are displayed simultaneously in separate panels on the screen. Index (triple-image) screen Three images are displayed simultaneously in separate panels on the screen. Various image information items are also displayed. Viewing still images,
Viewing an index screen (nine-image or triple-image)60min VGA 101 3/9 Aperture Value: F3.8 Shutter Speed: 1/30 Exposure Value: 0.0 ISO: 100 101-0003 20037410:30PM 101-0002 20037410:30PM BACK/NEXT VOLUME SINGLE DISPLAY MOVE SINGLE DISPLAY BACK/NEXT , Select the desired still image , Press the zoom W (index) , Press the zoom W (index) with b/B on the control button. button once. button once more. b : To display the preceding image The display switches to the Index (nine- The display switches to the Index (triple- B : To display the next image image) screen. image) screen. Press v/V on the control button to display To display the next (previous) index the remaining image information. screen Press v/V/b/B on the control button to To display the next (previous) index move the yellow frame up/down/left/right. screen Press b/B on the control button. To return to the single-image screen Press the zoom T repeatedly, or press z on the control button.,
Viewing images on a TV screen VGA101 2/9 101-0002 20037410:30PM BACK/NEXT VOLUME A/V connecting cable (supplied) 1 2 TV/Video switchA/V OUT (MONO) jack 3 , Connect the supplied A/V , Turn on the TV and set the TV/ , Set the mode dial to , and connecting cable to the A/V Video switch to “Video”. turn on the camera.
OUT (MONO) jack of thePress b/B on the control button to select the camera and the audio/video • The name and location of this switch may differ depending on your TV. For details, see the desired image. input jacks of the TV. operating instructions supplied with the TV. • When using your camera abroad, it may be If your TV has stereo input jacks, connect necessary to switch the video output signal to the audio plug (black) of the A/V match that of your TV system (page 106). connecting cable to the Lch jack. • Turn off both your camera and the TV before connecting the camera and the TV with the A/V connecting cable. • We recommend using the AC Adaptor (supplied) to prevent the power from turning off partway. Viewing still images, Viewing images on a TV screen PAL-M system If you want to view images on a TV screen, Brazil you need a TV with a video input jack and the A/V connecting cable (supplied). PAL-N system The color system of the TV must match that Argentina, Paraguay, Uruguay of your digital still camera. Check the following lists: SECAM system Bulgaria, France, Guiana, Hungary, Iran, NTSC system Iraq, Monaco, Poland, Russia, Ukraine, etc. Bahama Islands, Bolivia, Canada, Central America, Chile, Colombia, Ecuador, Jamaica, Japan, Korea, Mexico, Peru, Surinam, Taiwan, the Philippines, the U.S.A., Venezuela, etc. PAL system Australia, Austria, Belgium, China, Czech Republic, Denmark, Finland, Germany, Holland, Hong Kong, Italy, Kuwait, Malaysia, New Zealand, Norway, Portugal, Singapore, Slovak Republic, Spain, Sweden, Switzerland, Thailand, United Kingdom, etc.,
Deleting still images Deleting images60min VGA 60min VGA 60min VGA 101 2/9 101 2/9 101 2/9 Delete Delete 101-0002 20037410:30PM Exit Exit BACK/NEXT VOLUME OK BACK/NEXT OK BACK/NEXT123, Set the mode dial to , and , Press (Delete). , Select [Delete] with v on the turn on the camera. control button, then press z. The image has not yet been deleted at this
Press b/B on the control point. When the message “Disc access”button to select the image you disappears, the image has been deleted. want to delete. • You cannot delete the protected image (page 65). To continue and delete other images • • If the disc remaining space is not sufficient, you When using a CD-R, the disc remaining space may not be able to delete the image. Display the image to be deleted with b/B does not increase even if you delete images. on the control button. Then, select [Delete] • When using a CD-RW, the disc remaining with v and press z. space increases only if you delete the last image you shot while is indicated on the LCD screen. If you modify an image, or open To cancel deleting and close the disc cover, disappears. Select [Exit] with V on the control button, • It may take some time to delete the images. then press z. Deleting still images,
Deleting images in index (nine-image) modeDelete Exit Select All In Folder Delete Exit Select All In Folder SELECT MOVE TO NEXT123, While an index (nine-image) , Select [Select] with b/B on the , Select an image you want to screen (page 32) is displayed, control button, then press z. delete with v/V/b/B on the press (Delete). control button, then press z. To delete all the images in the folder Select [All In Folder] with on the control The green indicator appears on the B button, then press z. Select [OK], then selected image. At this point, the image has press z. All of the unprotected images in not yet been deleted. Repeat this step for all the folder are deleted. To cancel deleting, of the images you want to delete. select [Cancel], then press z. • To cancel a selection, press z again so that the indicator disappears.,
Deleting images in index (triple-image) modeAperture Value: F3.8 Shutter Speed: 1/30 Exposure Value: 0.0 Delete ISO: 100 Exit 101-0002 20037410:30PM 101-0002 20037410:30PM Delete Exit OK SINGLE DISPLAY BACK/NEXT OK BACK/NEXT412, Press (Delete) and select , While an index (triple-image) , Press (Delete). [OK] with B on the control screen (page 32) is displayed, The image has not yet been deleted at this button, then press z. set the image you want to point. delete to the center with b/B on When the message “Disc access” disappears, the images have been deleted. the control button. To cancel deleting Select [Exit] with b on the control button, then press z. Deleting still images,
Formatting a CD-RWDisc Tool 1 Finalize: OK Format: Cancel 2 Initialize: Delete Unfinalize: Exit 101-0002 20037410:30PM OK BACK/NEXT
OK312, Select [Delete] with v on the , Place the CD-RW you want to , Select 1 (Disc Tool 1) with v/ control button, then press z. format in the disc tray. V on the control button, then
Set the mode dial to SET UP, press B. Select [Format] withWhen the message “Disc access” disappears, the image has been deleted. and turn on the camera. v/V, then press B. To cancel deleting • A CD-R cannot be formatted. • We recommend using the AC Adaptor to Select [Exit] with on the control button, • Formatting is performed to delete all the images prevent the power from turning off partway V on the CD-RW or to use a CD-RW formatted through the formatting. then press z. with other equipment than this camera. • When you format a CD-RW, all data stored on the disc including protected images will be deleted. The CD-RW is also automatically initialized after formatting., Format Format Place on level surface Avoid any vibration All data will be erased Format in progress Ready? O K Cancel
OK3 4 , Select [OK] with v on the , Select [OK] with v, then press control button, then press z. z. “Format Place on level surface” appears on When the message “Format in progress” the LCD screen. disappears, formatting has been completed. To cancel formatting • It may take some time to format a CD-RW. Select [Cancel] with V on the control • A CD-RW can be formatted about 300 times. button, then press z. • A CD-RW formatted using other equipment than this camera cannot be used with this camera. Format the disc again with this camera. Deleting still images,
Before advanced operations Changing the menu settings Changing the items in the How to setup and SET UP screenoperate your camera a Press MENU. The menu appears. a Set the mode dial to SET UP. The usage of the menus and SET UP screen The SET UP screen appears. items that are most frequently used for 0EV Camera “Advanced operations” is described below. Moving Image : MPEG Movie AF Mode : Monitor 2 Smart Zoom : On 0EV Date/Time : Off EV WB ISO Red Eye Reduction : Off 2 AF Illuminator : Auto Control button Mode dial b Press b/B on the control
SELECTbutton to select the item you b Press v/V/b/B on the control want to set. button to select the item you The selected item turns yellow. want to set. The frame of the selected item turns yellow. 400 Setup 1 100 LCD Brightness:1 Auto LCD Backlight: MENU 2WB ISO Beep: 1 Language: OK Clock Set: Cancel c Press v/V on the control
OKbutton to select the desired setting. c Press z on the control button The frame of the selected setting turns to enter the setting. yellow, and the setting is entered.
To turn off the SET UP screen To turn off the menu display displayPress MENU. Set the mode dial to anything other than SET UP., c Select (P. Quality) with b/B,
Deciding the still then select the desired image Creating or selectingimage quality quality with v/V. a folder
FINEMode dial: /SCN Mode dial: SET UP You can select the still image quality from Your camera can create multiple folders [Fine] or [Standard]. Fine within a disc. You can select the folder used Standard P.Quality Mode PFX to store images. Control button When not creating a new folder, Mode dial “101MSDCF” folder is selected as the • You can also carry out this operation when the recording folder.mode dial is set to (Multi Burst only) (page 51). You can create folders up to “999MSDCF.” • This setting is maintained even when the power is turned off. Control button Mode dial
MENUa Set the mode dial to or SCN. b Press MENU. MENU The menu appears. • Up to 4000 images can be stored in one folder. When the folder capacity is exceeded, a new folder is automatically created. Before advanced operations,
Creating a new folder Changing the recordinga Set the mode dial to SET UP. folder b Select 2 (Disc Tool 2) with / a Set the mode dial to SET UP. v
V, [Create REC. Folder] with B/ b Select 2 (Disc Tool 2) with v/v/V, and [OK] with B/v, then V, [Change REC. Folder] with press z. B/v/V, and [OK] with B/v, then The following screen appears. press z. The recording folder selection screen 60min Create REC. Folder appears. Creating REC. Folder 102MSDCF Select REC. Folder 2/2 Ready? 102OKFolder Name: 102MSDCF Cancel No. Of Files: 0Created: 200374OK 1:05:34 AMOKCancel c Select [OK] with v, then press OK BACK/NEXT z. A new folder is created with a number c Select the desired folder with one higher than the largest number in b/B, and [OK] with v, then the disc, and the folder becomes the press z. recording folder.
To cancel changing the To cancel folder creation recording folderSelect [Cancel] in step 2 or 3. Select [Cancel] in step 2 or 3. • Once you create a new folder, you cannot delete • You cannot select the “100MSDCF” folder as a the new folder with the camera. • recording folder.Images are recorded in the newly created folder • The image is stored in the newly selected until a different folder is created or selected. folder. You cannot move images to a different folder with this camera., Advanced still image shooting
Choosing a focus range c Select 9 (Focus) with b/B, Choosing an auto finder frame then select [Multi AF] orfocus method — AF range finder [Center AF] with v/V. Mode dial: /SCN/ The focus is adjusted automatically.You can set the AF range finder frame and When you press and hold the shutter the AF mode.
Multipoint AF button halfway down and the focus isadjusted, the color of the AF range
AF focus range finder frame The camera calculates the distance in three finder frame changes from white toplaces to the left and right and in the center The AF range finder frame selects the focus green. of the image, letting you shoot using the position according to the subject position and size. auto focus function without worrying about Multipoint AF the image composition. This is useful when 60min it is difficult to focus on the subject because 3.1M FINE 101
AF Mode M AFit is not in the center of the frame. You canThe AF mode sets the focus operation check the position where the focus was AF range according to the AF response and the finder frameadjusted using the green frame. battery consumption. The Multipoint AF is the factory setting. Control button Center AF Center AF Mode dial The AF range finder is only the center of the 60min 3.1M FINE 101 frame. You can shoot in desired image M AF composition using the AF lock method. AF range finder frame a Set the mode dial to , SCN or . b Press MENU. MENU The menu appears. Advanced still image shooting, • When you are shooting movies (MPEG Movie) Choosing a focus operation Continuous AF and you choose Multipoint AF, the distance to — AF Mode The camera adjusts the focus before the the center of the screen is estimated as an average, so the AF works even with a certain Mode dial: SET UP shutter button is pressed and held halfway amount of vibration. The Center AF down, and then continues to adjust the focus automatically focuses only on the center of the You can select from the following three even after AF lock is completed. This image, so it is convenient when you want to focus modes for your camera. allows shooting of moving subjects with focus only on what you aim at. continued focus. • When you use the smart zoom or AF Single AF illuminator, priority AF movement is given to • The focus is not adjusted after the lock is subjects in or near the center of the frame. In This mode allows accurate focusing over a completed in the following cases, and the C AF this case, or flashes and the AF range wide range from near to distant subjects, indicator flashes. The camera operates in finder frame is not displayed. and is useful for shooting stationary Monitoring AF mode. subjects. The focus is not adjusted before – When shooting in the dark place the shutter button is pressed and held – When shooting with a slow shutter speed • The AF range finder frame is locked to the halfway down. When the shutter button is center. pressed and held halfway down and AF lock • Focus adjustment may not be able to keep up is complete, the focus is locked. when shooting fast moving subjects. • There is no lock sound when the focus is
Monitoring AF adjusted.• When recording with the self timer, the focus is This shortens the time needed for focusing. locked when you press the shutter button all the The camera adjusts the focus before the way down. shutter button is pressed and held halfway • Battery consumption may be faster than in any down, letting you compose images with the other AF mode. focus already adjusted. When the shutter button is pressed and held halfway down and AF lock is complete, the focus is locked. The factory setting is Monitoring AF. • Battery consumption may be faster than in Single AF mode., a Set the mode dial to SET UP. Shooting techniques • When you are using AF lock, you can b Select (Camera) with v, [AF When shooting with the subject at the edge of capture an image with the correct focus even
Mode] with B/v/V. the frame, the camera may focus on the center if the subject is at the edge of the frame.instead of on the subject at the edge of the • You can carry out the AF lock adjustment c Select the desired mode with frame. In a case like this, use AF lock to focus process before you press the shutter button
B/v/V, then press z. on the subject, and then recompose the picture fully down.and shoot (except in Continuous AF mode). • When shooting in Macro mode, the AF speed drops in order to focus accurately on close Compose the shot so that the subject is subjects. For quicker shooting, using a different centered in the AF range finder, and press the mode than Macro mode is recommended. shutter button halfway down. When the AE/AF lock indicator stops flashing and remains on, return to the fully composed shot, and press the shutter button fully down. AE/AF lock indicator 60min 3.1M FINE 101 M AF F3.8 AF range 30 finder frame m 60min 3.1M FINE 101 M AF F3.8 Advanced still image shooting, a Set the mode dial to , SCN,
Setting the distance or . Adjusting theto the subject exposure b Press MENU. — Focus preset The menu appears. — EV adjustment
Mode dial: /SCN/ c Select 9 (Focus) with b/B, Mode dial: /SCN/When shooting an image using a previously then select the distance to the This lets you adjust the exposure value set distance to the subject, or when shooting subject with v/V. which is set by automatic adjustment. You a subject through a net or through window You can select from the following can select values ranging from +2.0EV to glass, it is difficult to get the proper focus in distance settings –2.0EV in steps of 1/3EV. auto focus mode. In these cases, use of the 0.5m, 1.0m, 3.0m, 7.0m and ∞ Focus preset is convenient. (infinity) Control button Mode dial 1.0m Control button 7.0m Mode dial 3.0m1.0m 0.5m Center AF Multi AF Focus WB ISO
To reactivate auto focusingIn step 3, select 9 (Focus), then select MENU [Multi AF] or [Center AF]. MENU • Focus setting information is approximate, and should be used as a reference. • If you point the lens up or down, the error will increase. • If you select 0.5 m (9 3/4 inches) with the zoom set to the T side, you may not get a clear focus. In such cases, the focus setting information flashes. Press the zoom W button until the indicator stops flashing. • The focus preset does not work properly when attaching a conversion lens (not supplied)., a Set the mode dial to , SCN Shooting techniques or . Selecting the Normally, the camera automatically adjusts the exposure. If the image is too dark or too metering modeb Press MENU. The menu appears. bright as shown below, we recommend that Mode dial: /SCN/ you adjust the exposure manually. When c Select (EV) with b/B. shooting a back-lit subject or a subject This function enables you to select the The value of the exposure adjustment against a white (e.g. snowy) background, metering mode to suit the shooting is displayed. adjust the exposure toward the + side. When conditions and purpose. shooting a black, subject that fills the screen, adjust the exposure toward the – side. Multi-pattern metering 0EV The image is divided into multiple regions and metering is performed for each region. 0EV The camera judges the subject position and EV WB ISO background brightness, and determinesadSelect the desired exposure well-balanced exposure. value with / . The camera is set to multi-pattern meteringvVUnderexposed as the factory setting. Adjust the exposure value while t Adjust toward + checking the brightness of the Spot metering background. Light is measured only for the specific region where the subject is located. This lets
To reactivate auto exposure you adjust the exposure to the subject evenReturn the exposure adjustment value to when the subject is backlit or there is strong 0EV. contrast between the subject and the Appropriate exposure background. • If a subject is being shot in extremely bright or Position the spot metering cross hair on one dark conditions, or the flash is used, the exposure adjustment may not be effective. point of the subject you want to shoot. To focus on the metering position, setting 9 (Focus) to [Center AF] is recommended (page 43). Overexposed t Adjust toward – Advanced still image shooting, WB (Flash)
Adjusting color tones Adjusts the white balance only to the flashconditions — White Balance Spot metering Control button cross hair Mode dial: /SCN/ Mode dialSpot Multi Metering Mode WB ISO When the white balance is set to Auto, the white balance is automatically set and the overall color balance is adjusted according to the shooting conditions. However, when Control button you shoot under fixed conditions or special Mode dial lighting conditions, you can manually adjust the white balance.
MENUAuto (no display) Adjusts the white balance automatically a Set the mode dial to , SCN or . (Daylight) Shooting outdoors, shooting night scenes, b Press MENU. MENU neon signs, fireworks or sunrises, or The menu appears. shooting just before and after sundown a Set the mode dial to , SCN c Select [WB] (White Bal) with b/ or . (Cloudy) B, then select the desired Shooting under a cloudy sky setting with v/V. b Press MENU. The menu appears. (Fluorescent) To reactivate auto adjustment Shooting under fluorescent lighting c Select (Metering Mode) with Select [Auto] in step 3. b/B, then select [Multi] or (Incandescent) [Spot] with v/V. • Places where the lighting conditions change quickly • Under bright lighting such as photography studios, • Under fluorescent lights that flicker, the white c Select [ ] (Flash Level) with balance adjustment function may not work Adjusting the flash b/B, then select the desired correctly even though you select (Fluorescent). level setting with v/V. • When the flash strobes, the manual setting is High: Makes the flash level higher canceled, and the image is recorded in [Auto] — Flash Level than normal. mode (except in WB (Flash) mode). Mode dial: /SCN Normal: Normal setting. You can adjust the amout of flash light. Low: Makes the flash level lower than Shooting techniques normal. The subject coloring is affected by the Control button lighting conditions. For example, the entire • You can carry out this operation even when the Mode dial image appears blue under sunlight in the mode dial is set to (Clip Motion). summer, and white items gain a reddish tint under incandescent light bulbs, etc. The human eye can resolve these problems, but digital still cameras cannot recognize the correct colors without adjustments. Normally, the camera makes these adjustments automatically, but if recorded image colors appear unnatural, we recommend that you adjust the white MENU balance. a Set the mode dial to or
SCN.b Press MENU. The menu appears. Advanced still image shooting,
Before operation d Shoot the image for the first Shooting multiple Set [Moving Image] to [Clip Motion] in the frame.frames SET UP settings (pages 40 and 105). — Clip Motion Control button Shutter Mode dial Making “Clip Motion”Mode dial: You can shoot a number of consecutive still images (GIF animation). The GIF format has a small file size, making it convenient e Shoot the image for the next for creating home pages or attaching images frame. to e-mail. Press the shutter button to shoot the next frame, then repeat this operation • Due to the limitations of the GIF format, the until you have shot the desired number number of colors for Clip Motion images is of frames. reduced to 256 colors or less. Therefore, the image quality may deteriorate for some images. a Set the mode dial to . f Press z. All the frame images are recorded on Normal (160×120) b Press (Image Size). the disc. Clip Motion of up to 10 frames can be The Image Size setup appears. recorded. This is suitable for use on home Select the desired mode with To delete some or all of the pages, etc. c frame images while making a v/V. Clip Motion recording Mobile (120×108) You can select from [Normal] or Clip Motion of up to two frames can be [Mobile]. 1 Press b (7) in step 4 or 5. recorded. This is suitable for use with The frame images you shot are played portable data terminals. back in turn and stop at the last image. 2 Press (Delete), and select • The file size is reduced in Mobile mode, so the [Delete Last], or [Delete All] with b/B, image quality deteriorates. then press z., 3 Select [Delete] with v, then press z. When [Delete Last] is selected in step 2, Shooting in Multi Control button Shutter each time you repeat steps 1 through 3, Burst mode Mode dial the last frame you shot is deleted. — Multi Burst • Note that all images are not recorded on the disc until you carry out step 6. Mode dial: • For the number of images that can be recorded This mode records 16 frames in succession in Clip Motion, see page 100. • each time you press the shutter button. This The date and time are not superimposed onto Clip Motion images. is convenient for checking your form in • When viewing an image recorded in Clip sports, for example. MENU Motion on the index screen, the image may appear different from the actual image. • GIF files not created on this camera may not be a Set the mode dial to . displayed correctly. b Press MENU. The menu appears. c Select (Interval) with b/B, then select the desired frame
Before operation interval with v/V.Set [Moving Image] to [Multi Burst] in the You can choose the frame interval SET UP settings (pages 40 and 105). from the menu settings (pages 40 and 103). 1/30 1/7.5 1/15 1/30 WB Interval Advanced still image shooting, d Shoot the image. a Set the mode dial to , or The 16 frames are recorded as a single Shooting two images SCN. image (image size: 1.2M). continuously b Press MENU. • See page 63 to play back images recorded in — Burst 2 The menu appears. Multi Burst mode using this camera. • For the number of images that can be recorded Mode dial: / /SCN c Select [Mode] (REC Mode) with in Multi Burst mode, see page 100. This mode is used for continuous shooting. b/B, then select [Burst 2] with • You cannot use the flash in this mode. v/V. • Date and time cannot be superimposed onto Each time you press the shutter button in images. this mode, the camera records two images in succession.
TIFFVoice Control button Shutter E-MailBurst 2 Mode dial Normal REC Mode d Shoot the image. When the “Recording” indication disappears, you can shoot the next image.
To return to normal mode MENUSelect [Normal] in step 3. • You cannot use the flash in this mode. • During shooting in this mode, the images are not displayed on the screen. Compose the image before pressing the shutter button. • The recording interval is approximately 0.5 second., d Shoot the image.
Shooting still images When the “Recording” indication Shooting still imagesin TIFF mode disappears, you can shoot the next for e-mail image. — TIFF — E-Mail Mode dial: / /SCN To return to normal mode Mode dial: / /SCN Select [Normal] in step 3. This mode records an image without In E-mail mode, a small-size image compression, so the image quality does not • JPEG images are also recorded in the image (320×240) that is suitable for e-mail deteriorate. Images recorded in this mode size selected by the (Image Size) menu transmission is also recorded at the same are suitable for editing on a computer, etc. (page 20). Uncompressed (TIFF) images are time as recording a normal still image. (See recorded in [3.1M] size except when [2.8M page 20 for the normal still image sizes.) Control button Shutter (3:2)] is selected. Mode dial • Writing data takes more time than in normal Control button Shutter recording mode. Mode dial • For the number of images you can record in TIFF mode, see page 99.
MENU MENUa Set the mode dial to , or SCN. a Set the mode dial to , or b Press MENU. SCN. The menu appears. b Press MENU. c Select [Mode] (REC Mode) with The menu appears. b/B, then select [TIFF] with v. Advanced still image shooting, c Select [Mode] (REC Mode) with d Shoot the image. b/B, then select [E-Mail] with Shooting still images If you press and release the v/V. with audio files shutter button, sound is recorded for five seconds. d Shoot the image. — Voice If you hold down the shutter When the “Recording” indication button, sound is recorded until you Mode dial: / /SCN disappears, you can shoot the next release the shutter button for up to image. In Voice mode, an audio track is also 40 seconds. recorded at the same time as recording a
To return to normal mode normal still image. To return to normal modeSelect [Normal] in step 3. Control button Shutter Select [Normal] in step 3. Mode dial • For instructions on how to attach images to an • To view images recorded in Voice mode, carry e-mail message, consult the User’s Manual for out the same procedure described in “Viewing your e-mail software. movies on the LCD screen” (page 71). • For the number of images you can record in • For the number of images you can record in E-mail mode, see page 99. Voice mode, see page 99.
MENUa Set the mode dial to , or
SCN.b Press MENU. The menu appears. c Select [Mode] (REC Mode) with b/B, then select [Voice] with v/
Shooting according to Twilight portrait modeSoft snap mode Suitable for shooting portraits in dark The soft snap mode lets you shoot skin scene conditions places. Allows you to shoot sharp images of colors in brighter and warmer tones for people in dark places without losing the more beautiful pictures. In addition, the soft — Scene Selection dark atmosphere of the surroundings. The focus effect creates a gentle atmosphere for Mode dial: SCN shutter speed becomes slower, so we portraits of people, flowers, etc. recommend that you use a tripod to prevent When shooting night scenes, shooting shaking. people at night, shooting landscapes, shooting portraits, shooting snowy scenes, shooting at the shore, or shooting with priority on the shutter speed such as motion scenes, use the following modes to increase the quality of your images. Snow mode When shooting snowy scenes or other • The flash strobes regardless of the surrounding Twilight mode brightness. places where the whole screen appears Allows you to shoot night scenes at far white, use this mode to prevent sunken distance without losing the dark atmosphere colors and record clear and sharp images. Landscape mode of the surroundings. The shutter speed becomes slower, so we recommend that you Focuses on a distant subject to shoot use a tripod to prevent shaking. landscapes, etc. • The flash is set to (Forced flash) or (No flash). • • You cannot shoot in macro mode.You cannot shoot in macro mode. • • The flash is set to (Forced flash) or (No You cannot use the flash. flash). Advanced still image shooting, Beach mode When shooting seaside or lakeside scenes, NR slow shutterControl button the blue of the water is clearly recorded. Mode dial The NR slow shutter function removes noise from recorded images, providing clear images. When the shutter speed is low, the NR slow shutter function activates automatically and “NR” appears before the shutter speed indication. Press the shutter button fully down. • The flash is set to (Forced flash) or (No flash). MENU High-speed shutter mode a Set the mode dial to SCN. r Use this mode to shoot moving subjects Then the screen outdoors or in other bright places. b Press MENU. turns black.Capturing The menu appears. c Select [SCN] with b, then r select the desired mode with Finally, when v/V. “Processing” Processing disappears, the image has been • The shutter speed becomes faster, so images To cancel Scene Selection recorded. shot in dark places become darker. Set the mode dial to a different mode. • The flash is set to (Force flash) or (No • To eliminate the effects of vibration, use flash). • If you record in Burst 2 mode, the shutter speed of a tripod is recommended. becomes faster, so the image may not be recorded just as you intended. • The setting is maintained even when the power is turned off.,
Adding special effects Control button Confirming whether toMode dial record images — Picture Effect Mode dial: /SCN/ — Confirm before write You can digitally process images to obtain Mode dial: / /SCN special effects. When this function is activated, recorded Solarize B&W images are temporarily stored in the camera memory, letting you confirm whether or not MENU to save the images you have recorded on a disc. If you delete an unwanted image before recording, the disc remaining space a Set the mode dial to , SCN does not decrease. or . The light contrast is The picture is Control button Shutter clearer and the picture monochrome Mode dialb Press MENU. looks like an (black and white). illustration. The menu appears. Sepia Neg.Art c Select [PFX] (P. Effect) with b/ B, then select the desired mode with v/V.
To cancel Picture EffectsSelect [Off] in step 3. a Set the mode dial to SET UP. The picture is sepia- The color and toned like an old brightness of the b Select (Disc Tool 2) with v/ photograph. picture are reversed 2 as in a negative. V, [Confirm B. Write] with B/V, and [On] with B/v, then press z. c Set the mode dial to , or SCN. Advanced still image shooting, d Record the image. To confirm recording of images 60min FINE shot in the Burst 2 mode3.1M 101 Confirm 1/1 You can confirm whether to record each of the images by pressing b/B in step 5 and displaying the two images in order. Record Delete OK 60min 3.1MFINE 101 Confirm 1/2 e Select [Record] or [Delete] with v/V, then press z. Record Delete If you select [Record] BACK/NEXT OK “Recording” appears on the screen, and the image will be recorded on the disc. If you select [Delete] Select [Delete], then press z to not record the image on the disc. Select [Cancel], then press z to return to the previous screen. • You can carry out this operation even when the mode dial is set to (Multi Burst).,
Advanced still image viewingd Select the desired folder with Single screen
Selecting the folder b/B.60min VGA and playing back 101 9/9 Select Folder 2/2 images 102Folder Name: 102MSDCF No. Of Files: 9 Created: 2003741:05:34 AM — FolderOK101-0009 20037410:30PM
Mode dial: Cancel BACK/NEXT VOLUMEOK BACK/NEXTSelect the folder that images you want to Index (nine-image) screen playback are stored. e Select [OK] with v, then press Control button z. Mode dial
To cancel the selectionIn step 5, select [Cancel]. SINGLE DISPLAY MOVE
When multiple folders areIndex (triple-image) screen created in the disc When the first or last image in the folder is displayed, the following indicators appear on the screen. Aperture Value: F3.8MENU Shutter Speed: 1/30 : Moves to the previous folder. Exposure Value: 0.0ISO: 100 a Set the mode dial to . : Moves to the next folder. 101-0001 20037410:30PM : Moves to both the previous and next SINGLE DISPLAY BACK/NEXT b Press MENU. folders. The menu appears. • When no images are stored in the folder, “No file in this folder” appears. c Select [Folder] with b, then • You can play back images from a last-shot one press z. without selecting the folder. Advanced still image viewing,
Enlarging an image e Adjust the image size with the Enlarging a portion of — Playback zoom zoom W/T button.a still image a Set the mode dial to .
Mode dial: b Display the image to beYou can enlarge a part of an image up to enlarged. five times the original size. You can also record the magnified image as a new file. c Press the zoom T button to zoom in on the image. Control button d Select the desired portion of Mode dial the image with v/V/b/B.
To cancel playback zoomPress v Press z. • You cannot use playback zoom for movies (MPEG Movie), Clip Motion images and Multi Press Press Burst images. b B • If you press the zoom W button while a non- enlarged image is displayed, the LCD screen MENU Zoom button switches to the index screen (page 32). • You can enlarge the images displayed with the Quick Review function (page 24) by Press V performing steps c to e. v: To view more of the top of the image V: To view more of the bottom of the image b: To view more of the left side of the image B: To view more of the right side of the image,
Recording an enlarged c Select [Slide] with b/B, thenimage — Trimming Playing back press z. successive images a Press MENU after playback Set the following items with v/V/b/B. zoom. — Slide Show Interval The menu appears. 5 sec/10 sec/30 sec/1 minMode dial: b Select [Trimming] with B, then ImageYou can play back recorded images in Folder: press z. order. This function is useful for checking Plays back all images in the your images or for presentations, etc. c Select the image size with v/V, selected folder. then press . All: Plays back all images stored in z Control button the disc. The image is recorded, and the image Mode dial on the screen returns to the normal size Repeat after recording. On: Plays back images in a continuous loop (approx. • The trimmed image is recorded as the newest 20 min)*. file in the selected recording folder, and the Off: After all the images have been original image is retained. played back, the slide show • The quality of trimmed images may deteriorate. ends. • You cannot trim to an image size of 3:2. • You cannot trim uncompressed (TIFF) images. * The slide show does not end until all the images MENU • You cannot trim images displayed with Quick have been played back, even if the playback Review. time exceeds 20 minutes. • If you trim an image, the disc remaining space a Set the mode dial to . d Select [Start] with V/B, then will decrease. • If the disc remaining space is not sufficient, you b Press MENU. press z. may not be able to trim an image. The menu appears. The slide show begins.
To cancel the Slide Show settingSelect [Cancel] in step 3. Advanced still image viewing,
To stop slide show playback a Set the mode dial to , andPress z, select [Exit] with B, then press z Rotating still images display the image to rotate. again. — Rotate b Press MENU.
To skip to the next/previous Mode dial: The menu appears.image during the slide show You can rotate an image recorded in portrait c Select [Rotate] with B, then Press B (next) or b (previous). orientation and display it in landscape press z. orientation. • The interval setting time is approximate, and d Select with v, then rotate may vary according to the playback image size. the image with b/B. e Select [OK] with v/V, then press z.
To cancel rotationSelect [Cancel] in step 4 or 5, then press z. • You cannot rotate protected images and images recorded as movies (MPEG Movie), Clip Motion, Multi Burst and uncompressed (TIFF) images. • You may not be able to rotate images shot with Control button other cameras. Mode dial • When viewing images on a computer, the image rotation information may not be reflected depending on the application software. • If you rotate an image, the disc remaining space will decrease. • If the disc remaining space is not sufficient, you may not be able to rotate an image.
Playing back continuously Playing back frame by frame Playing back imagesshot in Multi Burst a Set the mode dial to . — Jog playback mode b Select the Multi Burst image a Set the mode dial to . with b/B. b Select the Multi Burst image
Mode dial: The selected Multi Burst image is with b/B.You can play back Multi Burst images played back continuously. The selected Multi Burst image is continuously or play them back frame by 60min 101 14/14 played back continuously. frame. This function is used for checking the image. c Press z when the desired Control button frame is displayed. Mode dial 101-0014 20037410:30PM PAUSE BACK/NEXT VOLUME “Step” appears. 60min 101 14/14
To pause playback Step12/16Press z. To resume playback, press z again. The playback starts from the frame 101-0014 20037410:30PM displayed on the LCD screen. PLAY FRAME BACK/NEXT VOLUME d Advance the frame with b/B. B: A next frame is displayed. When you keep and press B, the frame • When Multi Burst images are played back on a advances. computer or on a camera without the Multi b: A previous frame is displayed. Burst function, the 16 frames you shot will be displayed at the same time as part of one image. When you keep and press b, the frame advances in the reverse direction. Advanced still image viewing,
To return to the normal playbackPress z in step 4. The playback starts from the frame displayed on the LCD screen.
To delete shot imagesWhen using this mode, you cannot delete only certain frames. When you delete images, all 16 of the frames are deleted at the same time. 1 Display the desired Multi Burst image to delete. 2 Press (Delete). 3 Select [Delete], then press z. All of the frames are deleted.,
Still image editing In single-image mode In index (nine-image) mode Protecting imagesa Set the mode dial to . a Set the mode dial to , then — Protect b Display the image you want to press the zoom W (index) to
Mode dial: protect with / . display the index (nine-image) b Bscreen. This function protects images against c Press MENU. accidental erasure. b Press MENU. The menu appears. The menu appears. Control button Mode dial d Select [Protect] with b/B, then c Select [Protect] with b/B, then press z. press z. The displayed image is protected. The - (protect) indicator appears on the d Select [Select] with b/B, then image. press z. 60min VGA 101 2/9 e Select the image you want to protect with v/V/b/B, then MENU Zoom button Protect press z. Exit OK BACK/NEXT The green - indicator appears on the selected image. e To continue and protect other • If you protect an image, the disc remaining images, select the desired space will decrease. If you cancel the protection, the disc remaining space will also image with b/B, then press z. decrease. • If the disc remaining space is not sufficient, you To cancel the protection may not be able to protect an image. SELECT MOVE MENU TO NEXT • It may take some time to protect the images. Press z again in step 4 or 5. The - indicator disappears. f Repeat step 5 to protect other images. Still image editing, g Press MENU. In index (triple-image) mode To cancel previously set protection h Select [OK] with B, then press a Set the mode dial to , then Select the image to be unprotected, and z. press the zoom W (index) press z in step 4. To cancel protection of The - indicator turns white. The twice to display the index all images, repeat this process for each selected images are protected. (triple-image) screen. image.
To exit the Protect function b Display the image you want toSelect [Cancel] in step 4 or select [Exit] in protect in the center position step 8, then press z. with b/B. c Press MENU.
To cancel individual protectionThe menu appears. Select the image to be unprotected with v/V/b/B, then press z in step 5. The - d Select [Protect] with v/V, then indicator turns gray. Repeat this operation press z. for all images that are to be unprotected. The center image is protected. The - Press MENU, select [OK], and then press indicator appears on the image. z.
To protect all images in the DPOFfolder ProtectFolder Select [All In Folder] in step 4, and press 101-0002 20037410:30PM OK BACK/NEXT z. Select [On], then press z. e To protect other images,
To cancel all protection of all display the image you want toimages in the folder protect in the center position Select [All In Folder] in step 4, and press with b/B, and repeat step 4. z. Select [Off], then press z., c Press MENU.
Changing image size The menu appears. Choosing images to— Resize d Select [Resize] with print b/B, then
Mode dial: press z. — Print (DPOF) markYou can change the image size ofaeSelect the desired size with v/ Mode dial: recorded image, and save it as a new file. V, then press z. You can mark still images shot with your You can resize to the following sizes. The resized image is recorded in the camera that you want to have printed. This 3.1M, 2.0M, 1.2M, VGA recording folder as the newest file. function is convenient when you have The original image is retained even after images printed at a shop or using a printer resizing. To cancel resizing that conforms with the DPOF (Digital Print Control button Select [Cancel] in step 5. Order Format) standard. Mode dial Control button • You cannot change the size of movies (MPEG Mode dial Movie), Clip Motion, Multi Burst or uncompressed (TIFF) images. • When you change from a small size to a large size, the image quality deteriorates. • You cannot resize to an image size of 3:2. • When you resize a 3:2 image, the upper and lower black portions will be displayed on the image. MENU • If you resize an image, the disc remaining space will decrease. MENU • If the disc remaining space is not sufficient, you Zoom button a Set the mode dial to . may not be able to resize an image. b Display the image you want to • You cannot mark movies (MPEG Movie) or Clip Motion images. resize with b/B. • In E-mail mode, a print (DPOF) mark is marked on the normal size image that is recorded at the same time. • When you mark images shot in Multi Burst mode, all the images are printed on one image divided into 16 frames. Still image editing, • If you mark an image shot in TIFF mode with a In single-image mode In index (nine-image) mode print (DPOF) mark, only the uncompressed (TIFF) image is printed, and the JPEG image a Set the mode dial to . a Set the mode dial to , then recorded at the same time is not printed. press the zoom W (index) to • If you mark an image with a print mark, the b Display the image you want to disc remaining space will decrease. If you mark with / display the index (nine-image) b B. unmark the print mark, the disc remaining screen. space will also decrease. c Press MENU. • If the disc remaining space is not sufficient, you b Press MENU. may not be able to mark an image with a print The menu appears. The menu appears. mark. d Select [DPOF] with b/B, then • Make sure to finalize the disc before having c Select [DPOF] with B, then images printed at a shop that supports the press z. press z. DPOF standard (page 75). The mark is marked on the displayed image. d Select [Select] with b/B, then press z. 60min VGA 101 2/9 • When marking marks, you cannot select [All In Folder]. e Select the image you want to
DPOFExit mark with v/V/b/B, then press OK BACK/NEXT z. e To continue and mark other The green mark appears on the images, display the desired selected image. image with b/B, then press z.
To unmark the markPress z again in step 4 or 5. The mark disappears. SELECT MOVE MENU TO NEXT f Repeat step 5 to mark other images., g Press MENU. In index (triple-image) mode To unmark the mark h Select [OK] with B, then press a Set the mode dial to , then Press z again in step 4. The mark . press the zoom W (index) disappears. Repeat this operation for all the z images you want to unmark. The mark turns white. The twice to display the index mark setting is completed. (triple-image) screen. b Display the image you want to
To unmark marks mark in the center positionSelect the images to be unmarked in step with b/B. 5, then press z. c Press MENU.
To unmark all the marks in The menu appears.the folder d Select [DPOF] with v, then Select [All In Folder] in step 4, then press press z. z. Select [Off], then press z. The mark is marked on the center image.
To exit the mark functionSelect [Cancel] in step 4, or select [Exit] in step 8. DPOF Protect Folder 101-0002 20037410:30PM OK BACK/NEXT e To continue and mark other images, display the image you want to print in the center position with b/B, and repeat step 4. Still image editing, Enjoying movies c Select the desired size with v/ Shooting close-ups (Macro)
Shooting movies V. Set the mode dial to and follow theMode dial: You can choose from 640 (VGA), 160 procedure on page 25. (Mail). You can shoot movies with sound (MPEG For details on the recording time for Using the self-timer movies) using your camera. each image size, see page 100. Set the mode dial to and follow the d Press the shutter button fully procedure on page 26.
Before starting down.Set [Moving Image] to [MPEG Movie] in • Do not touch the microphone during shooting “REC” appears on the screen and the the SET UP settings (pages 40 and 105). movies. camera starts recording the image and • You cannot use the flash. Control button Shutter sound. • The date and time are not superimposed onto Mode dial movies.60min VGA 101 REC 00:00:02[00:10:48] • Recording stops when the disc is full. e Press the shutter button fully down again to stop recording. DISPLAY ON/OFF
Indicators during shootinga Set the mode dial to . The screen indicators are not recorded. b Press (Image Size). Each time you press DISPLAY ON/OFF, The Image Size setup appears. the status of the LCD screen changes as follows: Indicators off t All indicators on. For a detailed description of the indicators, see page 114., a Set the mode dial to . To advance or rewind the movie
Viewing movies on Press b/B during playback.the LCD screen b Select the desired movie with To return to the normal playback, press z. b/B.
Mode dial: Movies with the image size [160 Indicators during viewing(Mail)] are displayed a size smaller. You can view movies on the LCD screen movies 60min 160 with sound from the speaker. 101 10/10 Each time you press DISPLAY ON/OFF, 00:00:00 the status of the screen changes as follows: Control button Mode dial Indicators off t All indicators on. Speaker For a detailed description of the indicators, 101_0010 20037410:30PM PLAY BACK/NEXT VOLUME see page 115. • Movies with the image size [640 (VGA)] are displayed on the full screen. • The procedure for viewing movies on a TV is the same as that for viewing still images c Press z. (page 33). The movie and sound are played back. • The movies recorded using earlier Sony models During playback, B (Playback) may be also displayed a size smaller. appears on the screen. 60min 160 101 10/10 00:00:03 DISPLAY ON/OFF 101_0010 20037410:30 Playback barPM STOP REV/CUE VOLUME
To stop playbackPress z again.
To adjust the volumePress v/V to adjust the volume. Enjoying movies,
In single-image mode In index (nine-image) mode Deleting moviesa Set the mode dial to . a Set the mode dial to , then — Delete b Display the movie you want to press the zoom W (index) to Mode dial: delete with / . display an index (nine-image) b B screen. You can delete unwanted movies. c Press (Delete). b Press (Delete). Control button Mode dial The movie has not yet been deleted at this point. c Select [Select] with b/B, then d Select [Delete] with v, then press z. press z. d Select the movie you want to When the message “Disc access” delete with v/V/b/B, then disappears, the movie has been deleted. press z. To continue and delete other The green (Delete) indicator e appears on the selected movie. Zoom button movies, display the movie you want to delete with b/B, and repeat step 4. • When using a CD-R, the disc remaining space does not increase even if you delete images. • When using a CD-RW, the disc remaining To cancel deletion SELECT MOVE TO NEXT space only increases if you delete the last image Select [Exit] in step 4 or 5, then press z. you shot while is indicated on the LCD The movie has not yet been deleted at screen. If you modify an image, or open and this point. close the disc cover, disappears. e Repeat step 4 to delete other • If the disc remaining space is not sufficient, you may not be able to delete an image. movies. f Press (Delete)., g Select [OK] with B, then press In index (triple-image) mode To cancel deletion z. Select [Exit] in step 4, then press z. a Set the mode dial to , then When the message “Disc access” press zoom W (index) twice to disappears, the movies have been deleted. display an index (triple-image) screen.
To cancel deletion b Display the movie you want toSelect [Exit] in step 3 or 7. delete in the center position
To delete all movies in the folder with b/B.Select [All In Folder] in step 3, then press c Press (Delete). z. To cancel deletion, select [Cancel] with b, then press z. Delete Exit 101_0010 20037410:30PM • OK BACK/NEXT The movie has not yet been deleted at this point. d Select [Delete] with v, then press z. When the message “Disc access” disappears, the middle-positioned movie has been deleted. Enjoying movies, Enjoying images on your computer
Recommended computer • If you connect two or more USB equipment to Viewing images on environment a single computer at the same time, someyour computer equipment, including your camera, may not x Recommended Windows operate depending on the type of USB environment equipment.— Introduction • Operations are not guaranteed when using a OS: Microsoft Windows 98, Windows USB hub. There are two methods for viewing 98SE, Windows 2000 Professional, • Operations are not guaranteed for all the images on a computer. Windows Millennium Edition, Windows recommended computer environments XP Home Edition, or Windows XP mentioned above. – Viewing images using a CD-ROM drive Professional (Windows only) (page 75). The above OS must be installed at the Communication with your – Copying images into your computer factory. Operation is not assured in an computer through a USB connection (Windows, environment upgraded to the operating When your computer resumes from the Mac OS X only) (pages 81 and 87). systems described above or in a multi-boot suspend or sleep mode, communication environment. between your camera and your computer CPU: MMX Pentium 200 MHz or faster may not recover at the same time. USB connector: Provided as standard Display: 800 × 600 dots or more High Color (16-bit color, 65,000 colors) or When a USB connector is not more provided on your computer You can copy images using a CD-ROM x Recommended Macintosh drive. Finalize the disc beforehand environment OS: (Windows only). Mac OS X (v10.0/v10.1/v10.2) Only USB connection is possible. You cannot view the contents of discs using the CD-ROM drive. USB connector: Provided as standard Display: 800 × 600 dots or more 32,000-color mode or more, c Select [OK] with v on the
Viewing images using Control button control button, then press z. CD-ROM drive Mode dialFinalize Place on level surface
Finalizing a discReady? You must execute finalization before O KCancel viewing images recorded with your camera OK through a CD-ROM drive. Discs that have “Finalize Place on level surface” not been finalized cannot be read with a appears on the LCD screen. CD-ROM drive. a Set the mode dial to SET UP, d Select [OK] again with v on
What is finalization? and turn on the power. the control button, then pressThe SET UP screen appears on the z. • Finalization is required to view images LCD screen. recorded with your camera through a CD- Finalize ROM drive. • During finalization, we recommend using the Avoid any vibration • You can record new images on a finalized AC Adaptor to prevent the power from turning Finalize in progress disc by initializing it again. Initialization off partway. is automatically performed when a disc is b Select (Disc Tool 1) with v/ finalized using the camera. You must 1 execute finalization to view new images V on the control button, then When “Finalize in progress” through a CD-ROM drive. However, press B. disappears, finalization has been each time you execute finalization, the Select [Finalize] with v, then completed. disc remaining space will decrease by press B. Finalization starts and the disc approximately 13 MB. Therefore, we remaining indicator changes from recommend that you execute finalization Disc Tool 1 to , or from RW to RW . for multiple images at a time. Finalize : OK Finalization may take some time. Place 1 Format : Cancel • You can finalize a disc later, even if you 2 Initialize : the camera on a stable surface, and do remove it from the camera. Unfinalize :1 not shake or strike the camera during • The CD-ROM drive must support 2 finalization. MultiRead in order to read discs that have OK been finalized. Enjoying images on your computer,
To cancel finalization Canceling finalization b Select [OK] with v on theSelect [Cancel] with V on the control button (Unfinalize) (CD-RW only) control button, then press z. in step 3 or 4, then press z. Once finalization starts, you cannot cancel it. a Place the CD-RW you want to Unfinalize unfinalize in the disc tray. Avoid any vibration
Set the mode dial to . Unfinalize in progressUnfinalize Place on level surface When “Unfinalize in progress” Ready? disappears, unfinalization has beenOKCancel completed. OK Unfinalization starts and the disc remaining indicator changes from “Unfinalize Place on level surface” RWto . appears on the LCD screen. RWUnfinalization may take some time. Place the camera on a stable surface, • You can also carry out this operation when the and do not shake or strike the camera mode dial is set to , SCN or . • You can cancel the last-executed finalization during unfinalization. (unfinalization). Once canceled, the disc space used for that finalization is recovered. To cancel the unfinalization Select [Cancel] with V on the control button in step 1, then press z.
To unfinalize again aftercanceling the unfinalization Set the mode dial to SET UP, then select [Unfinalize] under (Disc Tool 1) in the SET UP settings (pages 40 and 105). • You cannot execute unfinalization when you record a new image or edit an image on a CD- RW after executing finalization.,
Using the supplied 8cm CD b Pull the third tab to the outside c Check that the disc is setadapter and slip the disc into place. correctly in the grooves of the Release the third tab and the adaptor, all the tabs are even a Slide the disc into the inner disc will be held firmly in with the surface of the adaptor, groove and under two of the tabs on the inner circle of the place. and the disc does not protrude adaptor in the order shown by from the adaptor. the numbers. 1 Printed side of the disc Printed side of • Do not expose the adaptor to direct sunlight or the adaptor heat sources. • The adaptor can be used only with Mavica If your CD-ROM drive does not discs. It cannot be used with other 8 cm CD-R/ • If the tabs protrude, press them into place, as support 8 cm CD, use the supplied CD-RW. this may cause your CD-ROM drive to 8 cm CD adaptor. malfunction. • The supplied adaptor may not be compatible with your CD-ROM drive. For details, see the operating instructions for the CD-ROM drive. • The reverse side of the disc is the recordable surface. • “SONY” is printed on the reverse side of the adaptor and the surface is lustrous. Enjoying images on your computer,
Viewing images throughabOpen [My Computer] and d Double-click the desired image CD-ROM drive double-click the drive you use file.for the disc — Windows 98/98SE/2000/Me/XP (Example:[MV_20030101(E:)]). a Start up your computer and insert a finalized disc into the11CD-ROM drive of your11computer. The file opens. • Copying a file to the hard disk of your c Double-click “DCIM,” then computer before viewing it is recommended. If double-click the folder you play back the file directly from the disc, the image and sound may break off. containing the image file you • To view images on a CD-RW using a CD-ROM want to view. drive, the drive must support MultiRead. Consult the drive manufacturer as to whether your drive supports MultiRead. • This section describes how to view images through a CD-ROM drive using Windows Me as an example. The required operations may differ depending on your OS. • You can use the “ImageMixer Ver. 1.5 for Sony” software to view images on your 101 computer. For details, see page 83. The folder contents are displayed.,
Image file storage destinations and image file namesImage files recorded with your camera are grouped as folders in the disc. Example: For Windows Me users Folder containing image data recorded usinga311camera without the folder creation function Folder containing image data recorded with this camera When no new folders have been created, this is only “101MSDCF” Folder containing E-mail mode image data, movie data and Voice mode audio data recorded using a camera without the folder creation function • Data in the “100MSDCF” or “MSSONY” folders is for playback only, and your camera cannot record images in these folders. • For more information about the folder, see page 41. Enjoying images on your computer, Folder File name File meaning 101MSDCF DSC0ssss.JPG • Still image files shot in up to 999MSDCF – Normal mode – Burst 2 mode (page 52) • Image files shot in Multi Burst mode (page 51) • Still image files recorded simultaneously in – E-Mail mode (page 53) – TIFF mode (page 53) – Voice mode (page 54) DSC0ssss.JPE • Small-size image files shot in E-Mail mode (page 53) DSC0ssss.MPG • Audio files shot in Voice mode (page 54) DSC0ssss.TIF • Uncompressed (TIFF) image file recorded in TIFF mode (page 53) CLP0ssss.GIF • Clip Motion files shot in Normal mode (page 50) CLP0ssss.THM • Index image files of Clip Motion files shot in Normal mode MBL0ssss.GIF • Clip Motion files shot in Mobile mode (page 50) MBL0ssss.THM • Index image files of Clip Motion files shot in Mobile mode MOV0ssss.MPG • Movie files shot in MPEG Movie mode (page 70) • ssss stands for any number within the range from 0001 to 9999. • The numerical portions of the following files are the same. –A small-size image file shot in E-Mail mode and its corresponding image file –An audio file shot in Voice mode and its corresponding image file –An uncompressed image file shot in TIFF mode and its corresponding image file –An image file shot with Clip Motion and its corresponding index image file, b Click [CD Mavica] on the d Select the desired language
Copying images into model selection screen. then click [OK].your computer through a USB connection • Close down all applications running on the The installing menu screen appears. computer before installing. • When using Windows 2000 or XP, log on as c Click [PTP Manager USB “Welcome to the InstallSheild Wizard Administrator. for PTP Manager” screen appears.Driver] on the installing menu screen. • This section describes the English screen.
Installing the PTP Managere Click [Next]. — Windows 98/98SE/2000/Me • When using Windows XP, you need not install the PTP Manager. • Once the PTP Manager is installed, you need not install the PTP Manager again. a Start up your computer, and insert the supplied CD-ROM The “Choose Setup Language” screen into the CD-ROM drive. appears. “Choose Destination Location” screen Do not connect your camera to appears. your computer at this time. The model selection screen appears. If it does not appear, double-click (My Computer) t (ImageMixer) in that order. Enjoying images on your computer, f Select the destination folder, h Check the settings and click j Select “Yes, I want to restart then click [Next]. [Next]. my computer now,” then click [Finish]. “Select Program Folder” screen The PTP Manager installation starts. appears. When installation finishes, The computer turns off and then “InstallShield Wizard Complete” g Select [PTP Manager] as a immediately on again (restart).screen appears. program folder, then click i Click [Finish]. [Next]. “Start Copying Files” screen appears.,
Installing “ImageMixer” b Follow instructions on each Connecting the camera tosucceeding screen. — Windows 98/98SE/2000/Me/XP your computer Install “ImageMixer” according to the You can use the “ImageMixer Ver. 1.5 for a Insert the disc with the images screen. Sony” software to copy, view and edit you want to copy into the images. For details, see the software’s help • When you use Windows 2000 or Windows XP, camera. files. install “WinASPI.” Connect the power cord to the • If DirectX8.0a or a later version is not installed a Click [ImageMixer] on the in your computer, the “Information” screen AC Adaptor (supplied) and installing menu screen. appears. Follow the procedure on the screen to then to a wall outlet. Select the desired language, install. then click [OK]. c Restart your computer according to the screen. d Remove the CD-ROM. To a wall outlet • For further details on the AC Adaptor, see page 14. The “Welcome to the InstallShield • For further details on the disc, see page 18. Wizard” screen appears. • This section describes the English screen. Enjoying images on your computer, b Turn on your computer and d Connect the USB cable to your PDisconnecting the USB cable the camera. computer. from your computer or removing POWER the disc from your camera POWER button during USB connection Windows 98/98SE/2000/Me Users 1 Click [Cancel] and close the window when using the PTP Manager 2 Disconnect the USB cable from the jack on the computer, or remove the disc. • When you use a desktop computer, we c Connect the supplied USB recommend that you connect the USB cable to cable to the (USB) jack of the USB connector on the rear panel. the camera. • When using Windows XP, the AutoPlay wizard automatically appears on the desktop. Proceed to page 86. Current Folder: 101 USB Mode PTP Accessaaaaindicators* Use MENU to move folder “USB Mode PTP” appears on the LCD screen of the camera. * During communication, the access indicators turn red. It may take some time for your computer to recognize the disc.,
Copying images c Specify the image group d Click [Finish].names to be copied and the a Follow the steps on page 83 to copy destination, then click make the USB connection, [Next]. then the PTP Manager starts. Click [Next]. The Explorer starts up and the copy destination folder opens. Image copying starts. When the copying is completed, the copying The images stored on the disc are completed message appears. displayed. It may take some time to load the images from the disc. • The images are copied into the “My b Select the images that you Documents” folder as an example. want to copy, then click [Next]. The images are copied to the copy destination folder. The Copy Destination and Group Name Setup screen appears. The images in the selected recording folder appear. To copy an image in a different folder, follow the procedure on page 41 and change the recording folder. Enjoying images on your computer,
When the PTP Manager does Copying images using the e Select [Nothing. I’m finishednot start up Windows XP AutoPlay working with these pictures],
Wizard then click [Next].1 Right-click [My Computer], then click The “Completing the Scanner and[Properties]. — Windows XP Camera Wizard” screen appears. The “System Properties” screen appears. • When using Windows 2000, click [Hardware] a Make a USB connection f Click [Finish]. tab on the “System Properties” screen. (page 83). The wizard closes. 2 Check whether the other device is The “Scanner and Camera Wizard” already installed. screen appears. 1 Click [Device Manager]. b Click [Next]. 2 Check for a [ Sony PTP] with a The images stored on the disc are mark. displayed. 3 If the device is installed, remove it. 1 Click [ Sony PTP]. c Click the checkbox of images (When using Windows 2000, right- that you do not want to copy to click [ Sony PTP].) your computer and remove the 2 Click [Remove] (or [Uninstall] in checkmark, then click [Next]. Windows 2000). The “Picture Name and Destination” The “Confirm Device Removal” screen appears. screen appears. d Select a name and destination 3 Click [OK]. for your pictures, then click The device is deleted. [Next]. Try PTP Manager installation again using Image copying starts. When copying is the supplied CD-ROM (page 81). completed, the “Other Options” screen appears.,
Viewing images on your For Mac OS X (v10.0/v10.1/computer v10.2) users a Double-click [My Documents] Only Mac OS X users can view images on the desktop. using a USB connection. The “My Documents” folder contents a Prepare your camera and are displayed. computer. b Double-click the desired folder For details, see page 83. and image file. b Connect your camera to your The image is displayed. computer with the USB cable. For details, see page 84. • This section describes the procedure for viewing copied images in the “My Documents” c Copy the images to your folder. • When using Windows XP, double-click [Start] computer using “Image t [My Documents] in that order. Capture.” • You can use the “ImageMixer Ver. 1.5 for The “Image Capture” starts Sony” software to view and edit images on your automatically. Copy the images computer. For details, see the software’s help files. following the on-screen directions. • You may not be able to copy movie files.
Creating a Video CDYou can create Video CDs using commercially available 12 cm CD-R. For details, see the “ImageMixer” help files. Enjoying images on your computer, Troubleshooting 2 Should your camera still not work 3 Should your camera still not work
Troubleshooting properly, press the RESET button on the properly, consult your Sony dealer orbottom of the camera using a fine-tipped local authorized Sony service facility. If you experience trouble with your camera, object, then turn on the power again. (All try the following solutions. the settings including date and time are 1 First check the items on the tables below. cleared.) If code displays “C:ss:ss” RESET button appear on the screen, the self- diagnosis display function is working (page 98).
Battery pack and powerSymptom Cause Solution You cannot charge the • The camera is turned on. p Turn the camera off (page 15). battery pack. The battery pack cannot • The battery pack is not installed correctly. p Install the battery pack while pushing the battery eject lever be installed. outward using the front edge of the battery pack (page 11). The /CHG lamp flashes • The battery pack is not installed correctly. p Install the battery pack correctly (page 11). when charging a battery • The battery pack has malfunctioned. p Consult your Sony dealer or local authorized Sony service pack. facility. The /CHG lamp does not • The AC Adaptor is disconnected. p Properly connect the AC Adaptor (page 12). light up when charging a • The battery pack is not installed correctly. p Install the battery pack correctly (page 11). battery pack. • The battery pack is completely charged. —, Symptom Cause Solution The battery remaining • You have used the camera for a long time in an — indicator is incorrect, or extremely hot or an extremely cold location. sufficient battery • The battery pack is dead (page 110). p Replace the battery pack with a new one. remaining indicator is • The battery pack is discharged. p Install a charged battery pack (page 11). displayed but the power • A deviation has occurred in the remaining p Fully charge the battery pack (page 12). runs out soon. battery time. The battery pack runs • You are shooting/viewing images in an — down too quickly. extremely cold location. • The battery pack is not charged enough. p Charge the battery pack (page 11). • The battery pack is dead (page 110). p Replace the battery pack with a new one. You cannot turn on the • The battery pack is not installed correctly. p Install the battery pack correctly (page 11). camera. • The AC Adaptor is disconnected. p Properly connect the AC Adaptor (page 14). • The battery pack is discharged. p Install a charged battery pack (page 11). • The battery pack is dead (page 110). p Replace the battery pack with a new one. The power turns off • If you do not operate the camera for about three p Turn on the camera again (page 15) or use the AC Adapter suddenly. minutes when using a battery pack, the camera (page 14). turns off automatically to prevent wearing down the battery (page 15). • The battery pack is discharged. p Replace it with a charged battery pack (page 11). Troubleshooting,
Shooting still images/moviesSymptom Cause Solution The subject is not visible • The mode dial is not set to , , SCN or p Set it to , , SCN or (pages 22 and 70). on the screen.The image is out of focus. • The subject is too close. p Record in the macro recording mode. Make sure to position the lens farther away from the subject than the shortest shooting distance when shooting (page 25). • The (Twilight mode) or (Landscape p Set it to other modes (page 55). mode) is selected for the Scene Selection function. • The focus preset function is selected. p Cancel the function (page 46). Smart zoom does not • You cannot use smart zoom while shooting — function. movies (MPEG Movie). • [Smart Zoom] is set to [Off] in the SET UP p Set [Smart Zoom] to [On] (pages 40 and 105). settings. • The image size is set to [3.1M] or [2.8M (3:2)]. p Set the image size to other settings except [3.1M] and [2.8M (3:2)]. The image is too dark. • You are shooting a subject with a light source p Adjust the exposure (page 46). behind the subject. • The brightness of the screen is too low. p Adjust the brightness of the LCD screen (pages 40 and 106). The image is too bright. • You are shooting a spotlighted subject in a dark p Adjust the exposure (page 46). location such as on a stage. • The brightness of the LCD screen is too bright. p Adjust the brightness of the LCD screen (pages 40 and 106). The image is • [PFX] (P. Effect) in the menu settings is set to p Cancel the B&W mode (page 57). monochrome (black and [B&W]. white). Vertical streaks appear • The smear phenomenon is occurring. p This is not a malfunction. when you are shooting a very bright subject. Noise appears in the • The camera is functioning to increase the p There is no effect on the recorded image. image when you view the visibility of the LCD screen by temporarily LCD screen in a dark brightening the image under conditions of low place. illumination., Symptom Cause Solution Your camera cannot • No disc has been inserted. p Insert a disc (page 18). record images. • The disc is full. p Replace it with a new one. Format the disc when using a CD- RW. • The disc has not been initialized. p Initialize the disc (page 19). • You cannot record images while charging the — flash. • The mode dial is not set to , or SCN p Set it to , , or SCN (page 22). when shooting a still image. • The mode dial is not set to when shootingapSet it to (page 70). movie. The flash does not work. • The mode dial is not to , or (Clip p Set it to , or (Clip Motion) (pages 22 and 70). Motion). • The flash is set to (No flash). p Set the flash to Auto (No indicator) or (Forced flash) (page 27). • The (Twilight mode) is selected for the p Set it to other settings (page 55). Scene Selection function. • (High-speed shutter mode), (Beach p Set the flash to (Forced flash) (page 27). mode), (Snow mode) or (Landscape mode) is selected for the Scene Selection function. • [Moving Image] in the SET UP settings is set to p Set it to [Clip Motion]. [MPEG Movie] or [Multi Burst]. • [Mode] (REC Mode) in the menu settings is set p Set it to other settings. to [Burst 2]. The macro function does • The (Twilight mode) or (Landscape p Set it to other settings (page 55). not work. mode) is selected for the Scene Selection function. The eyes of the subject — p Set [Red Eye Reduction] in the SET UP settings to [On] (pages come out red. 28 and 105). The date and time are • The date and time are not set correctly. p Set the correct date and time (page 16). recorded incorrectly. The F value and shutter • The exposure is incorrect. p Correct the exposure (page 46). speed flash when you press and hold the shutter button halfway down. Troubleshooting,
Viewing imagesSymptom Cause Solution Your camera cannot play • The mode dial is not set to . p Set it to (page 31). back images. • Your camera cannot play back image files — copied from the hard disk of your computer if the folder/file name has been changed or the image has been modified. • The camera is in USB mode. p Cancel USB communication (page 84). The image appears rough — p This is not a malfunction. right after playback starts. The image does not • The video output signal setting of your camera in p Change the setting (pages 40 and 106). appear on the TV screen. the SET UP settings is incorrect. • The connection is not correct. p Check the connection (page 33). The image cannot be — p See page 93. played back on a computer. Unknown beeps are heard • These beeps are heard when the auto focus is p This is not a malfunction. Shoot the image using the focus preset from the camera while working. (page 46). viewing a movie.
Deleting/Editing ImagesSymptom Cause Solution Your camera cannot • The image is protected. p Cancel the protection (page 65). delete an image. • The disc remaining space is not sufficient. p This is not a malfunction. You have deleted an • Once you have deleted an image, you cannot p Marking - (protect) will prevent you from deleting images by image by mistake. restore it. mistake (page 65). The resizing function • You cannot resize movies (MPEG Movie), Clip — does not work. Motion, Multi Burst and uncompressed (TIFF) images. • The disc remaining space is not sufficient. p This is not a malfunction. You cannot display a print • You cannot display print (DPOF) marks on — (DPOF) mark. movies and Clip Motion images. • The disc remaining space is not sufficient. p This is not a malfunction.,
ComputersSymptom Cause Solution You do not know if the OS — p Check “Recommended computer environment” (page 74). of your computer is compatible. You cannot install PTP — p In Windows 2000, log on as Administrator (authorized Manager. Administrators) (page 81). Your computer does not • The camera is turned off. p Turn on the camera (page 15). recognize your camera. • The battery level is low. p Use the AC Adaptor (page 14). • You are not using the supplied USB cable. p Use the supplied USB cable (page 84). • The USB cable is not connected firmly. p Disconnect the USB cable, and connect it again firmly. Make sure that “USB Mode” is displayed on the screen (page 84). • The camera was connected to a computer with p Delete the device which is not recognized, then install PTP the USB cable before installing PTP Manager, Manager (pages 86 and 81). so the device was not recognized by the computer. • The USB connectors on your computer are p Disconnect the USB cables except for the ones connected to the connected to other equipment besides the keyboard, the mouse, and your camera. keyboard, the mouse, and your camera. • PTP Manager is not installed. p Install PTP Manager (page 81). • The camera is not connected directly to your p Connect the camera directly to your computer without passing computer. through a USB hub or other device. You cannot copy images. • The camera is not correctly connected to your p Connect the camera and your computer correctly using the USB computer. cable (page 83). • You are not using the correct copy procedure for p Follow the designated copy procedure for your OS (pages 85 your OS. and 87). — p If you are using the “ImageMixer Ver. 1.5 for Sony” application software, click on HELP. The image cannot be — p If you are using the “ImageMixer Ver. 1.5 for Sony” application played back on a software, click on HELP. computer. — p Consult the computer or software manufacturer. Troubleshooting, Symptom Cause Solution The image cannot be • The disc has not been finalized. p Finalize the disc (page 75). played back through the • Vibration caused an error during recording. p You may be able to view the image if you connect the camera to CD-ROM drive of your your computer with the USB cable. computer. • The CD-ROM drive does not support the packet- p Consult the computer or the CD-ROM drive manufacturer. write system. • The CD-ROM drive does not support the p Consult the computer or the CD-ROM drive manufacturer. MultiRead. • The disc may be scratched or dirty. p Clean the disc if the disc is dirty. When the disc is scratched replace the disc. — p Causes not described above have occurred, consult the computer or software manufacturer. The image and sound are • You are playing back the file directly from the p Copy the file to the hard disk of your computer and then play interrupted by noise when disc. back the file from the hard disk. you view a movie on a computer. You cannot print an — p Check the printer settings. image. — p Click on HELP for the “ImageMixer Ver. 1.5 for Sony” application software. An error message appears • The computer display is not set correctly. p Set the computer display as follows: when you set the supplied Windows: 800 × 600 dots or more CD-ROM in your High Color (16 bits, 65,000 colors) or more computer. Macintosh: 800 × 600 dots or more 32,000-color or more
DiscSymptom Cause Solution You cannot record on a • The disc is full. p Replace it with a new one. Format the disc when using a CD- disc. RW. • The disc is not initialized. p Initialize the disc (page 19). • The disc is not placed correctly. p Place the disc correctly in the disc tray (page 18).,
OthersSymptom Cause Solution Your camera does not • You are not using an “InfoLITHIUM” battery p Use an “InfoLITHIUM” battery pack (page 109). work. pack. • The battery level is low. (The E indicator p Charge the battery pack (page 11). appears.) • The AC Adaptor is not connected securely. p Connect it securely to the DC IN jack of your camera and to a wall outlet (page 14). The power is on, but the • The built-in microcomputer is not working p Disconnect, and then, after one minute, reconnect all power camera does not work. properly. sources and turn on the camera. If this does not work, press the RESET button on the bottom of the camera using a fine-tipped object, then turn on the power again. (All the settings including date and time are cleared.) You cannot identify an — p Check the indicator (page 113). indicator on the screen. The lens gets fogged. • Moisture condensation has occurred. p Turn off the camera and leave for about an hour at room temperature for the moisture to evaporate before use (page 108). A file error occurs when • The image file has an error. — you play back a file. • The image was not recorded correctly. — • The disc is dirty p Clean the disc (page 108). • The disc may be scratched. p Replace the disc. Troubleshooting,
Warnings andmessages The following messages may appear on the screen. Message Meaning/Corrective action Cover open • The disc cover is open. Close the disc cover (page 18). No disc • No disc is inserted. Insert a disc (page 18). Drive error • Trouble has occurred with the drive. Turn the power off and on again (page 15). System error • Trouble has occurred with the drive or the camera. Turn the power off and on again (page 15). Disc error • The inserted disc cannot be used with your camera, is damaged, is dirty, or cannot be read due to vibration. Dew error • Moisture condensation has occurred inside the camera. Turn off the camera and wait for about an hour for the moisture to evaporate before use (page 108). Disc protect • The disc was protected with a computer, and cannot be recorded. No file in this folder • No images have been recorded in this folder. Folder error • A folder with the same first three digits number already exists in the disc. (For example: 123MSDCF and 123ABCDE) Select other folders, or create a new folder. Cannot create more folders • The folder whose first three digits of the name is “999” exists in the disc. You cannot create any folders. Not enough disc space • The remaining disc space is insufficient for any operation other than finalization. Not initialized • The disc has not been initialized, so images cannot be recorded by the camera. Initialize the disc (page 19). Already initialized • The disc has already been initialized, so initialization is not necessary. Already finalized • The disc has already been finalized, so finalization is not necessary. Cannot record • The camera cannot record images in the selected folder. Select a different folder (page 41). File error • An error occurred while playing back the image. Image size over • You are playing back an image of a size larger than can be played back with your camera. Invalid operation • You are playing back a file that was created on equipment other than your camera. File protect • The image is protected against erasure. Release the protection (page 65). For "InfoLITHIUM" battery • The battery is not the “InfoLITHIUM” type. only, Message Meaning/Corrective action Not enough battery • The battery level is too low to execute initialization or finalization. E • The battery level is low. Charge the battery pack (page 11). Depending on the conditions of use, the indicator may flash even though there is still 5 to 10 minutes of remaining battery time left. Can not unfinalize • A CD-R or disc that has not been finalized is inserted. Can not format • A CD-R is inserted. Format error • A disc formatted with equipment other than your camera is inserted. Format again with your camera (page 38). Turn the power off and on • A problem with the lens caused an error. again • The amount of light is not sufficient, so you are not holding the camera steady enough. Use the flash, or mount the camera on a tripod or otherwise secure the camera in place. Troubleshooting,
Self-diagnosis display Code Cause Corrective actionC:32: ss There is trouble with your • Turn the power off and on again – If a code starting with an alphabet camera’s hardware. (page 15). letter appears C:13: ss The camera cannot read or write • Clean the disc when the disc is dirty Your camera has a self-diagnosis display. data on the disc. (page 108). This function displays the camera condition The inserted disc cannot be used • Insert a new disc (page 18). on the LCD screen with a combination of a with your camera, or the data is letter and four numerical digits. If this damaged. occurs, check the following code chart and E:61: ss A camera malfunction that you • Press the RESET button (page 88) located attempt the corresponding corrective E:91: ss cannot reverse has occurred. on the bottom of the camera, then turn on the power again. actions. The last two digits (indicated by ss) will differ depending on the state of If you are unable to solve the problem even the camera. after trying the corrective actions a few times, contact your Sony dealer or local authorized Sony service facility and inform C:32:ss them of the 5-digit code. Self-diagnosis display, Additional information • The values for the number or images that
Number of images can be saved and the shooting time maythat can be saved or vary, depending on the shooting shooting time conditions.• The numbers in the table indicate the In addition to setting the image size and number of images that can be recorded or image quality, you can also select various the recordable time for the supplied CD- recording modes according to the purpose R disc. of shooting. Number of still images that can be saved (Units: images) Image size Recording mode 3.1M 2.8M (3:2) 2.0M 1.2M VGA Normal Standard 145 145 234 345 1285 Fine 81 81 131 194 655 E-Mail Standard 137 137 214 303 845 Fine 79 79 124 180 518 TIFF Standard 12 14 13 13 13 Fine 11 13 12 12 13 Voice* Standard 131 131 200 276 669 Fine 77 77 119 170 446 * When recording sound for 5-second Additional information, Shooting time (Units: images) Image size Image quality Recording mode 640 (VGA) 160 (Mail) Mobile Normal Standard Fine MPEG Movie 5 min. 51 sec. 89 min. 11 sec. – – – – Clip Motion* – – 1070 505* – – Multi Burst** – – – – 345 194 * When recording 10 frames per Clip Motion file **The image size is 1.2M.,
Menu itemsMenu items that can be modified differ depending on the position of the mode dial. The screen shows only the items you can operate in each specific mode. Factory settings are indicated with x.
When the mode dial is set toItem Setting Description Mode (REC Mode) TIFF – Records an uncompressed (TIFF) file in addition to the JPEG file (page 53). Voice – Records an audio file (with a still image) in addition to the JPEG file (page 54). E-Mail – Records a small-size (320×240) JPEG file in addition to the selected image size (page 53). Burst 2 – Records two images in succession (page 52). xNormal – Records an image using the normal recording mode.
When the mode dial is set to or SCNItem Setting Description SCN / / / / / / Sets the Scene Selection mode (page 55). (This setting can be made only in SCN x mode.) (EV) +2.0EV / +1.7EV / +1.3EV / +1.0EV / Adjusts the exposure (page 46). +0.7EV / +0.3EV / x0EV / –0.3EV / –0.7EV / –1.0EV / –1.3EV / –1.7EV / –2.0EV 9 (Focus) ∞ / 7.0m / 3.0m / 1.0m / 0.5m / Center AF / Chooses a focus range finder frame (page 43), or sets the focus preset distance xMulti AF (page 46). (Metering Mode) Spot / xMulti Adjusts the exposure to the subject you are shooting (page 47). WB (White Bal) WB / / / / / xAuto Sets the white balance (page 48). Additional information, Item Setting Description ISO 400 / 200 / 100 / xAuto This selects the ISO sensitivity. Select a large number when shooting in dark locations or shooting a subject moving at high speed, or select a small number to obtain high image quality. (This setting cannot be made in SCN mode.) (P.Quality) xFine / Standard Records images with fine/standard quality (page 41). Mode (REC Mode) TIFF – Records an uncompressed (TIFF) file in addition to the JPEG file (page 53). Voice – Records an audio file (with a still image) in addition to the JPEG file (page 54). E-Mail – Records a small-size (320×240) JPEG file in addition to the selected image size (page 53). Burst 2 – Records two images in succession (page 52). xNormal – Records an image using the normal recording mode. ± (Flash Level) High / xNormal / Low Selects the amount of flash light (page 49). PFX (P.Effect) Solarize / B&W / Sepia / Neg. Art / xOff Sets the image special effects (page 57). (Sharpness) + / xNormal / – Adjusts the sharpness of the image. The indicator appears (except when the setting is Normal). (This setting cannot be made in SCN mode.) (Saturation) + / xNormal / – Adjusts the saturation of the image. The indicator appears (except when the setting is Normal). (This setting cannot be made in SCN mode.) (Contrast) + / xNormal / – Adjusts the contrast of the image. The indicator appears (except when the setting is Normal). (This setting cannot be made in SCN mode.)
When the mode dial is set to (when [Moving Image] is set to [MPEG Movie] in the SET UP settings)Item Setting Description (EV) +2.0EV / +1.7EV / +1.3EV / +1.0EV / Adjusts the exposure (page 46). +0.7EV / +0.3EV / x0EV / –0.3EV / –0.7EV / –1.0EV / –1.3EV / –1.7EV / –2.0EV 9 (Focus) ∞ / 7.0m / 3.0m / 1.0m / 0.5m / Center AF / Chooses a focus range finder frame (page 43), or sets the focus preset distance xMulti AF (page 46). (Metering Mode) Spot / xMulti Adjusts the exposure to the subject you are shooting (page 47). WB (White Bal) WB / / / / / xAuto Sets the white balance (page 48). PFX (P.Effect) Solarize / B&W / Sepia / Neg. Art / xOff Sets the image special effects (page 57).,
When the mode dial is set to (when [Moving Image] is set to [Clip Motion] in the SET UP settings)Item Setting Description (EV) +2.0EV / +1.7EV / +1.3EV / +1.0EV / Adjusts the exposure (page 46). +0.7EV / +0.3EV / x0EV / –0.3EV / –0.7EV / –1.0EV / –1.3EV / –1.7EV / –2.0EV 9 (Focus) ∞ / 7.0m / 3.0m / 1.0m / 0.5m / Center AF / Chooses a focus range finder frame (page 43), or sets the focus preset distance xMulti AF (page 46). (Metering Mode) Spot / xMulti Adjusts the exposure to the subject you are shooting (page 47). WB (White Bal) WB / / / / / xAuto Sets the white balance (page 48). ± (Flash Level) High / xNormal / Low Selects the amount of flash light (page 49). PFX (P.Effect) Solarize / B&W / Sepia / Neg. Art / xOff Sets the image special effects (page 57).
When the mode dial is set to (when [Moving Image] is set to [Multi Burst] in the SET UP settings)Item Setting Description (EV) +2.0EV / +1.7EV / +1.3EV / +1.0EV / Adjusts the exposure (page 46). +0.7EV / +0.3EV / x0EV / –0.3EV / –0.7EV / –1.0EV / –1.3EV / –1.7EV / –2.0EV 9 (Focus) ∞ / 7.0m / 3.0m / 1.0m / 0.5m / Center AF / Chooses a focus range finder frame (page 43), or sets the focus preset distance xMulti AF (page 46). (Metering Mode) Spot / xMulti Adjusts the exposure to the subject you are shooting (page 47). WB (White Bal) WB / / / / / xAuto Sets the white balance (page 48). (Interval) 1/7.5 / 1/15 / x1/30 (NTSC) – Selects the Multi Burst shutter interval in NTSC mode. 1/6.3 / 1/12.5 / x1/25 (PAL) – Selects the Multi Burst shutter interval in PAL mode. • The shutter interval settings differ depending on the setting of the [Video Out] item in the SET UP settings (page 106). (P.Quality) xFine / Standard Records images with fine/standard quality (page 41). PFX (P.Effect) Solarize / B&W / Sepia / Neg. Art / xOff Sets the image special effects (page 57). Additional information,
When the mode dial is set toItem Setting Description Folder OK / Cancel Selects the folder containing the image you want to play back (page 59). Protect — Protects images against accidental erasure (page 65). DPOF — Marks the print (DPOF) mark on still images you want to print (page 67). Slide Interval – Sets the slide show interval (page 61). (Only in single-image mode.) x5 sec / 10 sec / 30 sec / 1 min Image – Sets the range of the playback images. xFolder / All Repeat – Plays back images repeatedly. xOn / Off Start – Starts the slide show. Cancel – Cancels the slide show. Resize 3.1M / 2.0M / 1.2M / VGA / Cancel Changes the recorded still image size (page 67). (Only in single-image mode.) Rotate (counter clockwise) / Rotates the still image (page 62). (Only in single-image mode.) (clockwise) / OK / Cancel,
SET UP itemsSet the mode dial to SET UP. The SET UP screen appears. Factory settings are indicated with x. (Camera) Item Setting Description Moving Image xMPEG Movie / Clip Selects the shooting mode for a movie (pages 70, 50 and 51). Motion / Multi Burst AF Mode Single / xMonitor / Cont Selects the focus operation mode (page 44). Smart Zoom xOn / Off Selects whether to use the smart zoom (page 25). Date/Time Day & Time / Date / xOff Selects whether to superimpose the date or time onto the image (page 30). The date and time are not inserted in movie (MPEG Movie), Clip Motion or Multi Burst mode. Also, the date and time appear only during playback, and do not appear during recording. Red Eye Reduction On / xOff Reduces the red-eye phenomenon when using a flash (page 28). AF Illuminator xAuto / Off Selects whether to emit AF illuminator light. Used when it is difficult to focus on the subject in dark conditions (page 28). (Disc Tool 1) Item Setting Description Finalize OK / Cancel Finalizes a disc to allow viewing through a CD-ROM drive (page 75). Format OK / Cancel Formats a CD-RW (page 38). Initialize OK / Cancel Initializes a disc (page 19). Unfinalize OK / Cancel Cancels the last executed finalization (page 76) (CD-RW only). Additional information, (Disc Tool 2) Item Setting Description File Number xSeries – Assigns numbers to files in sequence even if the disc is changed or the recording folder is changed. Reset – Resets the file numbering and starts from 0001 each time the folder is changed. (When the recording folder contains a file, a number one higher than the largest number is assigned.) Create REC. Folder OK / Cancel Creates a folder for recording images (page 42). Change REC. Folder OK / Cancel Changes a folder for recording images (page 42). Confirm B. Write On / xOff Selects whether to confirm recording or deletion of the image before writing to the disc (page 57). (Setup 1) Item Setting Description LCD Brightness Bright / xNormal / Dark Selects the LCD brightness. This has no effect on the recorded images. LCD Backlight Bright / xNormal Selects the brightness of the LCD backlight. Selecting [Bright] makes the screen bright and easy to see when using the camera outdoors or in other bright locations, but also uses up the battery charge faster. Displayed only when using your camera with the battery pack. Beep Shutter – Turns on the shutter sound. (The shutter sound is heard when you press the shutter button.) xOn – Turns on the beep/shutter sound when you press the control button/shutter button. Off – Turns off the beep/shutter sound. A Language — Displays the menu items, warnings and messages in selected language. Clock Set OK / Cancel Sets the date and time (pages 16 and 40). (Setup 2) Item Setting Description Video Out NTSC – Sets the video output signal to NTSC mode (e.g., USA, Japan). PAL – Sets the video output signal to PAL mode (e.g., Europe).,
On pickup lens Cleaning the DC plug Precautions Do not touch the pickup lens inside the disc Clean the DC plug of the AC Adaptor withcover. Also, do not open the disc cover a dry cotton bud. Do not use the dirty plug.
On handling the camera except when inserting or removing a disc in Use of the dirty plug may not properlyDo not carry the camera by the disc order to keep dust out. charge the battery pack. cover
Do not leave the camera in the Cleaning the lensfollowing places Wipe the lens with a soft cloth to remove fingerprints, dust, etc. • In extremely hot place, such as in a car parked in the sun. The camera body may Cleaning the camera surface become deformed or this may cause a Clean the camera surface with a soft cloth malfunction. slightly moistened with water, then wipe • Under direct sunlight or near a heater. Do not touch the rotating disc the surface with a dry cloth. Do not use the The camera body may become deformed This may cause injury. following as this may damage the finish or or this may cause a malfunction. the casing. • On rocking vibration
On cleaning the pickup lens • Thinner• Near strong magnetic place• Benzine When the pickup lens becomes dirty and the • In sandy or dusty places, be careful not to • Alcohol camera cannot operate properly, clean the let sand or dust get into the camera. This • Disposable cloth pickup lens using a commercially available may cause the camera to malfunction, and • Volatile insecticide blower. in some cases this malfunction cannot be • Contact with rubber or vinyl for a long repaired. time
On cleaningCleaning the LCD screen Note on operating temperature Wipe the screen surface with an LCD Your camera is designed for use between Pickup lens cleaning kit (not supplied) to remove the temperatures of 0°C and 40°C (32° F fingerprints, dust, etc. and 104° F). Shooting in extremely cold or hot places that exceed this range is not recommended. Additional information,
On moisture condensation On internal rechargeable buttonIf the camera is brought directly from a cold battery On discs to a warm location, or is placed in a very This camera has an internal rechargeable damp room, moisture may condense inside button battery for maintaining the date and Cleaning the disc or outside the camera. This moisture time and other settings regardless of • Do not clean a disc using a cleaner before condensation may cause a malfunction of whether the power is on or off. shooting. Use a commercially available the camera. This rechargeable button battery is blower to remove dust. continually charged as long as you are using • If fingerprints, dust, droplets of water, or Moisture condensation occurs easily the camera. However, if you use the camera oil make the recordable side (the reverse when: for only short periods it discharges of the printed side) of a disc dirty, the • The camera is brought from a cold gradually, and if you do not use the camera camera may not properly record images location such as a ski slope into a warmly at all for about one month it becomes on the disc. Be sure to handle discs with heated room. completely discharged. In this case, be sure care. • The camera is taken from an air- to charge this rechargeable button battery • Do not scratch both sides of a disc. conditioned room or car interior to the hot before using the camera. • If a disc does become dirty, wipe it in a outdoors, etc. However, even if this rechargeable button straight line from center to edge with a battery is not charged, you can still use the soft dry cloth or a soft cloth lightly How to prevent moisture camera as long as you do not record the date moistened with ethyl alcohol or other condensation and time. mild detergent. You can also use a When bringing the camera from a cold commercially available CD cleaner. place to a warm place, seal the camera in a Charging method plastic bag and allow it to adapt to Connect the camera to a wall outlet using conditions at the new location over a period the AC Adaptor, or install a charged battery of time (about an hour). pack, and leave the camera for 24 hours or more with the power off. If moisture condensation occurs Turn off the camera and wait about an hour for the moisture to evaporate. Note that if you attempt to shoot with moisture remaining inside the lens, you will be unable to record clear images., • Do not use any solvent (benzine, thinner, • Do not store a disc in the following locations: static protection product, record cleaner, – In dusty or dirty places On “InfoLITHIUM” etc.) to clean a disc. – Exposed to direct sunlight – Near heaters battery pack – In damp places Notes • If you attempt to play back a disc on which no • Do not remove the disc while reading or writing images have been recorded using a CD-ROM data. drive, the CD-ROM drive may malfunction or • Data may be damaged if: the disc may be scratched. What is the “InfoLITHIUM” – You remove the disc or shake the camera battery pack? while reading or writing data. – You turn off your camera while reading or The “InfoLITHIUM” battery pack is a writing data. lithium-ion battery pack that has functions – You use the camera in a location subject to for communicating information related to the effects of static electricity or noise. operating conditions between your camera • Do not attach any material on the surface of a and the AC Adaptor. disc. This causes a nonuniform rotating speed, The “InfoLITHIUM” battery pack which may cause the camera to malfunction. • You can write only on the label surface of a calculates the power consumption disc. Write using only an oil-based felt-tip according to the operating conditions of marker and do not touch the ink until dry. Do your camera, and displays the remaining not heat the disc or use a sharp-pointed tool, battery time in minutes. such as a ballpoint pen. • Hold the disc at the edges while supporting the center hole lightly. Do not touch the recordable Charging the battery pack side (the reverse of the printed side) of a disc. We recommend charging the battery pack in an ambient temperature of between 10°C to 30°C (50° F to 86° F). You may not be able to efficiently charge the battery pack outside of this temperature range. • When you carry or store a disc, put it in its case. • Do not strike, bend, drop or rub the edge of a disc. Additional information,
Effective use of the battery pack How to store the battery pack• Battery performance decreases in low- If the battery pack is not to be used for a temperature surroundings. So, the time that long time, do the following procedure once the battery pack can be used is shorter in per year to maintain proper function. cold places. We recommend the following 1 Fully charge the battery. to ensure longer battery pack use: – Put the battery pack in a pocket close to 2 Discharge on your camera. your body to warm it up, and insert it in 3 Remove the battery from your camera your camera immediately before you and store it in a dry, cool place. start shooting. • Frequently operating the zoom or flash Battery life wears out the battery charge faster. • The battery life is limited. Battery • We recommend having spare battery capacity decreases little by little as you packs handy for two or three times the use it more and more, and as time passes. expected shooting time, and making trial When the battery operating time is shots before taking the actual shots. shortened considerably, a probable cause • Do not expose the battery pack to water. is that the battery pack has reached the The battery pack is not water-resistant. end of its life. Buy a new battery pack. • The battery life varies according to how it
Remaining battery time indicator is stored and the operating conditions andThe power may go off although the battery environment for each battery pack. remaining indicator shows there is enough power to operate. Use the battery pack up and charge the battery pack fully again so that the indication on the battery remaining indicator is correct. Note, however, that the correct battery indication sometimes will not be restored if the camera is used in high temperatures for a long time or left in a fully charged state, or the battery pack is frequently used., File format (DCF compliant) [LCD screen]
Specifications Still images: Exif Ver. 2.2 JPEGcompliant, GIF (for Clip Motion), LCD panel TIFF, DPOF compatible 6.2 cm (2.5 type) TFT drive x Camera Audio with still image: Total number of dots [System] MPEG1 compliant (Monaural) 123 200 (560×220) dots Movies: Image device MPEG1 compliant (Monaural) [General] 6.67 mm (1/2.7 type) color CCD Recording media Primary color filter Used battery pack8 cm CD-R/CD-RW NP-FM50 Total pixels number of camera Flash Recommended distance (ISO set to Approx. 3 338 000 pixels Power requirementsAuto): 0.8 m to 2.5 m (31 1/2 inches 7.2 V Effective pixels number of camera to 8 feet 2 7/16 inches) Approx. 3 207 000 pixels Power consumption (during shooting with LCD backlight on) Lens 3× zoom lens [Drive] 2.6Wf= 6.4 – 19.2 mm (9/32 – 25/32 inches) (41 – 123 mm (1 5/8 – Readout Non-contact optical readout (using Operating temperature 4 7/8 inches) when converted to a semiconductor laser) 0°C to +40°C (32°F to +104°F) 35 mm still camera Laser Wavelength: 779 to 789 nm Storage temperature F3.8 – 3.9 Maximum output: 23 mW –20°C to +60°C (4°F to +140°F) Exposure control Dimensions Automatic exposure, Scene selection [Input and Output connectors] 131.7×92.3×73.8 mm (7 modes) (5 1/4×3 3/4×3 inches) White balance A/V OUT (MONO) (Monaural) (W/H/D, excluding maximum Automatic, Daylight, Cloudy, Minijack protrusions)Video: 1 Vp-p, 75 Ω, unbalanced, Fluorescent, Incandescent, Flash Mass Approx. 522 g (1 lb 2 oz) (including sync negative Ω battery pack NP-FM50, disc, and lens Audio: 327 mV (at a 47 k load) Ω cap)Output impedance 2.2 k USB jack mini-B Built in microphone Electret condenser microphone Built-in speaker Dynamic speaker Exif print Compatible Print Image Matching II Compatible Additional information, x AC-L15A/L15B AC Adaptor x Accessories Power requirements • AC Adaptor (1) 100 – 240 V AC, 50/60 Hz • Power cord (1) Current consumption • USB cable (1) 0.35 – 0.18 A • NP-FM50 battery pack (1) Power consumption 18 W • A/V connecting cable (1) Output voltage • 8 cm CD adaptor (1) 8.4 V DC, 1.5 A • Mavica disc (2) (CD-R (1), CD-RW (1)) Operating temperature • Shoulder strap (1) 0°C to +40°C (32°F to +104°F) • Lens cap (1) Storage temperature • Lens cap strap (1) –20°C to +60°C (–4°F to +140°F) Dimensions (approx.) • CD-ROM (SPVD-010) (1) 56×31×100 mm • Operating instructions (1) (2 1/4×1 1/4×4 inches) (w/h/d) excluding projecting parts Design and specifications are subject to change Mass (approx.) without notice. 190 g (6.7 oz) excluding power cord x NP-FM50 battery pack Used battery Lithium-ion battery Maximum voltage DC 8.4 V Nominal voltage DC 7.2 V Capacity 8.5 Wh (1 180 mAh), O Remaining disc capacity
The LCD screen indicatorP Macro indicator (25)/
When shooting still images AF mode (44)/Multipoint AF /Center AF indicator (43)/ 1 qa Focus preset value (46) qs2QSelf-diagnosis display (98)/ qd EV level indicator (46) 3 qf R Aperture value indicator 60min VGA 101 4 3:2 qg S NR slow shutter indicator (56)/ M AF qh Shutter speed indicator SOLARIZE E:91:01 qj T Self-timer indicator (26)F3.8 6 + 125 U Vibration warning indicator (97)qk7VMenu/Guide menu (40) ql 8 w; • Pressing MENU switches the menu on/off. WB ISO wa q; ws A Recording mode indicator (50-54) G Sharpness indicator (102)/ B AE/AF lock indicator (22) Saturation indicator (102)/ C Battery remaining indicator (12) Contrast indicator (102) D White balance indicator (48)/ H Low battery warning indicator Mode dial indicator/ (97) Flash mode indicator (27)/ I AF range finder frame (43) Red-eye reduction indicator (28) J Spot metering cross hair (48) E Date/time indicator (30)/ K Image size indicator (20) ISO number indicator (102) L Image quality indicator (41) F Picture effect indicator (57)/ M Recording folder indicator (41) AF illuminator indicator (28) N Remaining number of recordable Page numbers in parentheses indicate the images indicator (21) location of additional important information. Additional information,
When shooting movies182960 q;min 160 101 3 STBY 00:00:00 [00:28:25] qa qs 4 SOLARIZE E:91:01 + qd5 qf 6 qg WB PFX qh A Recording mode indicator (70) J Recording folder indicator (41) B Battery remaining indicator (12) K Remaining disc capacity C White balance indicator (48) indicator D Picture effect indicator (57) L Multipoint AF /Center AF E Low battery warning indicator indicator (43)/Focus preset value (97) (46) F AF range finder frame (43) M Self-diagnosis display (98)/ G Spot metering cross hair (48) EV level indicator (46) H Image size indicator (70) N Macro indicator (25) I Recording time [maximum O Self-timer indicator (26) recordable time] indicator (100) P Menu/Guide menu (40) • Pressing MENU switches the menu on/off.,
When playing back still images When playing back moviesqd qj qk 8 qf1960min 160 ql 60min VGA 101 0 qg VOL. 101 8/8 2 101 12/12 00:00:12 qa 3 x1.3 w; 4 wa 5 qh 6 Folder Protect DPOF Slide ws BACK/NEXT VOLUME qs OK M Image size indicator (71) A Recording mode indicator (50-54) N Recording mode indicator (71) B Protect indicator (65)/ Print (DPOF) mark indicator (67)/ O Volume indicator (71)/Playback Volume indicator (54) indicator (71)/Remaining space recovery indicator (35) C Remaining space recovery indicator (35) P Playback bar (71) D Zoom scaling indicator (60)/ Q Change folder indicator (59)/ Jog playback indicator (63) Playback folder indicator (59) E Image size indicator (20) R Image number/Number of images recorded in selected F Folder-file number folder G Change folder indicator (59) S Remaining disc capacity H Playback folder indicator (59) indicator I Recording folder indicator T Counter (71) J Remaining disc capacity U Playback image (71) indicator V Menu/Guide menu (40) K Image number/Number of images recorded in selected folder L Recording date and time of the Page numbers in parentheses indicate the playback image (30)/Menu/Guide location of additional important menu (40) information. Additional information,
Index C E Index Changing the recording folder ... 42 Editing still imagesCharging Print (DPOF) mark ... 67
A battery pack ... 11, 109 Protect ... 65AC Adaptor ... 11, 14 charging time ... 12 Resize ... 67 Access lamp ... 18 Cleaning ... 107, 108 E-mail ... 53 AE/AF lock ... 45 Clip Motion ... 50 Enlarging an image ... 60 AE/AF lock indicator ... 22 Clock set ... 16 EV adjustment ... 46 AF illuminator ... 28, 105 Computer External power source ... 14 AF lock ... 45 copying images ... 85 AF Mode ... 44 ImageMixer ... 83 F AF range finder frame ... 43 PTP Manager ... 81 File Auto adjustment mode ... 22 USB cable ... 84 file names ... 80 Auto Focus ... 23, 43 Confirm before write ... 57 image file storage destinations ... 79 Auto power-off function ... 15 Contrast ... 102 Flash A/V connecting cable ... 33 Control button ... 10, 15, 40 Flash Level ... 49 Copying images ... 85 Red-eye reduction ... 28 Creating a new folder ... 42
B selecting a flash mode ... 27Battery pack Focusing
Dbattery life ... 13, 110 AF lock ... 45 charging ... 11, 109 DC plug ... 11, 14 auto focus method ... 43 charging time ... 12 Deleting images ... 35, 72 Center AF ... 43 remaining indicator ... 12, 110 Disc Continuous AF ... 44 Beep/shutter sound ... 106 cleaning ... 108 focus preset ... 46 Brightness finalizing ... 75 Monitoring AF ... 44 image ... 46 formatting ... 38 Multipoint AF ... 43 LCD screen ... 106 initializing ... 19 shooting (using auto adjustment mode) ... 22 Burst ... 52 inserting ... 18 Single AF ... 44 number of images that can be saved or Folder shooting time ... 99 changing the recording folder ... 42 unfinalizing ... 76 creating a new folder ... 42 DPOF ... 67 playback folder ... 59 recording folder ... 42 Formatting a CD-RW ... 38,
G Movie Rotate ... 62GIF ...50, 80 deleting movies ... 72 number of images that can be saved or S
I shooting time ... 13, 100 Saturation ... 102shooting movies ... 70 Image Scene Selection viewing images on your computer ... 74 copying images to your computer ...85 Beach mode ... 56 viewing movies on the LCD screen ... 71 file names ...80 High-speed shutter mode ... 56 MPEG Movie ... 70 image file storage destinations ...79 Landscape mode ... 55 MPG ... 80 image quality ...21, 41 Snow mode ... 55 Multi Burst ... 51 image size ...20, 99 Soft snap mode ... 55 “InfoLITHIUM” battery pack ...109 Twilight mode ... 55 Installation N Twilight portrait mode ... 55 ImageMixer ...83 NR slow shutter ... 56 Self-diagnosis display ... 98 PTP Manager ...81 NTSC system ... 34, 106 Self-timer ... 26 ISO ...102 Setting
P date and time ... 16 J PAL system ... 34, 106 image size ... 20menu items ... 40, 101 Jog playback ...63 Picture effect ... 57 SET UP items ... 40, 105 JPG ...80 Power AC Adaptor ... 14 Sharpness ... 102
L battery pack ... 11Shooting mode on/off ... 15 auto adjustment mode ... 22 LCD screen Precautions ... 107 Burst ... 52 brightness ...106 Print (DPOF) mark ... 67 Clip Motion ... 50 screen display ...113, 114, 115 Protect ... 65 E-mail ... 53 movie ... 70
M Multi Burst ... 51QMenu settings ...40, 101 TIFF ... 53 Quick Review ... 24 Metering mode Voice ... 54 multi-pattern metering ...47 Slide show ... 61 spot metering ...47 R Smart zoom ... 25 Mode dial ...16, 23 Red-eye reduction ... 28 Still image shooting Moisture condensation ...108 RESET button ... 88 auto adjustment mode ... 22 Resize ... 67 EV adjustment ... 46 Index, image size ... 20 V metering mode ... 47 Video CD ... 87 number of images that can be saved or Viewing images on the LCD screen ... 31, 71 shooting time ... 21, 99 Viewing images on your computer ... 74 picture effect ... 57 Voice ... 54 Scene Selection ... 55 shooting close-ups (Macro) ... 25 W superimposing the date and time ... 30 Warnings and messages ... 96 using the flash ... 27 White Balance ... 48 using the self-timer ... 26 using the zoom feature ... 24 White Balance ... 48 Z Still image viewing Zoom delete ... 35 playback zoom ... 60 index screen ... 32 smart zoom ... 25 playback zoom ... 60 using the zoom feature ... 24 rotate ... 62 single image screen ... 31 slide show ... 61 viewing images on a TV screen ... 33 viewing images on the LCD screen ... 31 viewing images on your computer ... 74 Superimposing the date and time ... 30
TTIFF ... 53 Trimming ... 61 TV color system ... 34
UUnfinalizing a disc ... 76 USB ... 81, 84, 87 Using your camera abroad ... 14, Printed on 100% recycled paper using VOC (Volatile Organic Compound)-free vegetable oil based ink. Additional information on this product and answers to frequent asked questions can be found at our Customer Support Website. Sony Corporation Printed in Japan,
Reverse 987622541.pdf Revision HistoryS.M. Rev. Ver. Date History Contents issued 1.0 2003.04 Official Release — —]
MVC-CD200/CD300 SERVICE MANUAL US ModelCanadian Model Level 2 Ver 1.0 2001. 05 AEP Model UK Model E Model Hong Kong Model Australian Model Chinese Model Tourist Model Korea Model Photo : MVC-CD300 Japanese Model This service manual contains information for japanese model as well. On the SY-67 board
MVC-CD500 SERVICE MANUAL LEVEL 1 US Model Ver 1.0 2003. 04 Canadian Model Revision History AEP Model UK Model E Model Australian Model Japanese Model Link SPECIFICATIONS SELF DIAGNOSIS FUNCTION ORNAMENTAL PARTS • INSTRUCTION MANUAL is shown at the end of this document. DIGITAL STILL CAMERA MVC-CD500
MVC-FD81 SERVICE MANUAL US Model Canadian Model AEP Model E Model Australian Model Hong Kong Model Tourist Model Chinese Model DIGITAL STILL CAMERA
MVC-FD81 SERVICE MANUAL US Model Canadian Model AEP Model Ver 1.0 1998.09 UK Model E Model Australian Model Hong Kong Model Tourist Model Chinese Model SPECIFICATIONS DIGITAL STILL CAMERA MICROFILM CD-206 BOARD CAMERA REC 1 IC431 1,3 78µsec 9.5Vp-p 2 IC431 2,4 µ 9.5Vp-p78 sec 3 IC431 8 1.8Vp-p 78µse
S® Training Manual Digital Camera Sony Mavica Cameras MVC-FD85 Troubleshooting & Circuit Descriptions Course: DSC-01
S® Training Manual Digital Camera Sony Mavica Cameras Models: MVC-FD85 MVC-FD90 MVC-FD95 MVC-FD85 Troubleshooting & Circuit Descriptions Course: DSC-01 Table of Contents Introduction Floppy Disc Drive 41 Common Failures 1 Checking for Floppy Disc Drive Voltage 41 Purpose of this book 1 Checking the
MVC-FD71 SERVICE MANUAL US Model Canadian Model AEP Model UK Model Ver 1.3 2000. 09 E Model With SUPPLEMENT-1 Australian Model (9-974-076-81) Hong Kong Model
MVC-FD71 SERVICE MANUAL US Model Canadian Model AEP Model UK Model Ver 1.3 2000. 09 E Model With SUPPLEMENT-1 Australian Model (9-974-076-81) Hong Kong Model Tourist Model SPECIFICATIONS DIGITAL STILL CAMERA MICROFILM • Floppy disk that can be used by the MVC-FD71 • Size : 3.5-inch • Type : 2 HD • C
MVC-FD75 SERVICE MANUAL US Model Canadian Model AEP Model UK Model Ver 1.0 2001. 01 E Model Hong Kong Model Australian Model Brazilian Model DIGITAL STILL CAMERA
MVC-FD75 SERVICE MANUAL US Model Canadian Model AEP Model UK Model Ver 1.0 2001. 01 E Model Hong Kong Model Australian Model Brazilian Model SPECIFICATIONS DIGITAL STILL CAMERA • Floppy disk that can be used by the MVC-FD75 • Size : 3.5-inch • Type : 2 HD • Capacity : 1.44 MB • Format : MS-DOS forma
MVC-FD87/FD92 SERVICE MANUAL US Model Canadian Model Level 2 AEP Model UK Model E Model Ver 1.1 2001. 06 Hong Kong Model Australian Model Korea Model Japanese Model PHoto: MVC-FD92 This service manual contains information for Japanese model as well. When the machine needs to be repaired, please refe
AVR055: Using a 32kHz XTAL for run-time calibration of the internal RC Features • Calibration using a 32 kHz external crystal • Adjustable RC frequency with maximum +/-2% accuracy • Tune RC oscillator at any operating voltage and temperature • Tune RC oscillator to any frequency within specification
8-bit RISC Microcontroller Application Note Rev. 1981A–AVR–03/05 AVR155: Accessing an I2C LCD Display using the AVR® 2-wire Serial Interface Features • Compatible with Philips' I2C protocol • 2-wire Serial Interface Master Driver for Easy Transmit and Receive Function • Initialization and Use ofa2x1
AVR107: Interfacing AVR serial memories Features • Devices: AT25128A/256A, AT25F1024/2048/4096 • Full Serial Memory Functions Support • Memory Array Burst Read • Page Burst Write • Write Protection Detection • On Going Access Detection • Non-blocking Write Access • Access Status Information 1 Introd
AVR120: Characterization and Calibration of the ADC on an AVR Features • Understanding Analog to Digital Converter (ADC) characteristics • Measuring parameters describing ADC characteristics • Temperature, frequency and supply voltage dependencies • Compensating for offset and gain error Introductio
AVR001 Conditional Assembly and portability macros Features • Increased portability • Easier Code Writing • Simplified I/O Register Access • Improved Assembly Status Feedback 1 Introduction This application note describes the Conditional Assembly feature present in the AVR Assembler version 1.74 and
8-bit Microcontroller Application Note Rev. 2527A–AVR–9/02 AVR223: Digital Filters with AVR Features • Implementations of Simple Digital Filters • Coefficient and Data Scaling • Fast Implementation of 2nd Order FIR Filter • Compact Implementation Of 8th Order FIR Filter • Fast Implementation of 2nd
8-bit Microcontroller Application Note Rev. 1619C–AVR–01/04 AVR040: EMC Design Considerations Scope This application note covers the most common EMC problems designers encounter when using microcontrollers. It will briefly discuss the various phenomena. The refer- ence literature covers EMC design i
8-bit RISC Microcontroller Application Note Rev. 2508B–AVR–01/04 AVR182: Zero Cross Detector Features • Interrupt Driven • Modular C Source Code • Size Efficient Code • Accurate and Fast Detection • A Minimum of External Components Introduction One of the many issues with developing modern applicati
AVR242: 8-bit Microcontroller Multiplexing LED Drive anda4x4Keypad Multiplexing Features reduced to fifteen with a bit of ingenuity,
AVR242: 8-bit Microcontroller Multiplexing LED Drive anda4x4Keypad Multiplexing Features reduced to fifteen with a bit of ingenuity, allowing the smaller 20-pin AVR to be LED Drive and a • 16 Key Pushbutton Pad in4x4Matrix • 4 Digit Multiplexed LED Display with used. The circuit diagram is shown in
8-bit Microcontroller Application Note Rev. 1051B–AVR–05/02 AVR180: External Brown-out Protection Features • Low-voltage Detector • Prevent Register and EEPROM Corruption • Two Discrete Solutions • Integrated IC Solution • Extreme Low-cost Solution • Extreme Low-power Solution • Formulas for Compone
8-bit Microcontroller Application Note Rev. 1259D–AVR–04/05 AVR134: Real Time Clock (RTC) using the Asynchronous Timer Features • Real Time Clock with Very Low Power Consumption (4 µA @ 3.3V) • Very Low Cost Solution • Adjustable Prescaler to Adjust Precision • Counts Time, Date, Month, and Year wit
Wiring Diagram Samsung Electronics 6-1
8-bit Microcntroller Application Note Rev. 2532A–AVR–01/03 AVR243: Matrix Keyboard Decoder Features • 64-key Push-button Keyboard in8x8Matrix • No External Components Required • Wakes Up from Sleep Mode on Keypress • Easily Implemented into Other Applications • Low Power Consumption • Software Conta
Alignment and Adjustments 1. Tuner FM THD Adjustment FMOutput Antenna GND SETSSG FREQ. 98 MHz Terminal Oscilloscope Adjustment FM S.S.G Input point FM DETECTOR COIL Speaker (FM DET) Terminal output Input Output 60 dB Distortion Meter Minumum Distortion (0.4% below) (Figure 1-1) Figure1-1 IF CENTER
8-bit Microcontroller Application Note Rev. 2540A–AVR–07/03 AVR104: Buffered Interrupt Controlled EEPROM Writes Features • Flexible Multi-byte EEPROM Buffer • Power Efficient EEPROM Access • Access Control on Buffers • EEPROM Buffer Rewrite Introduction Many applications use the built-in EEPROM of t
Schematic Diagram - This Document can not be used without Samsung’s authorization - 7-1 MAIN 7-1 Samsung Electronics 7-2 FRONT - This Document can not be used without Samsung’s authorization - Samsung Electronics 7-2 7-3 DSP - This Document can not be used without Samsung’s authorization - 7-3 Sam
TroubleShooting 9-1 Main 9-1 Samsung Electronics Samsung Electronics 9-2 9-3 Samsung Electronics Samsung Electronics 9-4 9-2 DVD Servo parts 9-5 Samsung Electronics Samsung Electronics 9-6 9-7 Samsung Electronics Samsung Electronics 9-8 9-9 Samsung Electronics Samsung Electronics 9-10 9-11 Samsung
AVR054: Run-time calibration of the internal RC oscillator Features • Calibration of internal RC oscillator via UART • LIN 2.0 compatible synchronization/calibration to within +/-2% of target frequency • Alternate run-time synchronization/calibration to within +/-1% of target frequency • Support for
DVD RECEIVER AMP HT-DB120 SERVICE Manual DVD RECEIVER AMP SYSTEM CONTENTS 1. Alignment and Adjustments 2. Exploded Views and Parts List 3. Electrical Parts List 4. Block Diagrams 5. PCB Diagrams 6. Wiring Diagram 7. Schematic Diagrams 8. IC block Diagrams 9.Troubleshooting - Confidential - ELECTRONI
8-bit Microcontroller Application Note Rev. 2542A–AVR–09/03 AVR131: Using the AVR’s High-speed PWM Features • Analog Waveform Generation using PWM • High-speed Prescalable PWM Clock Introduction This application note is an introduction to the use of the high-speed Pulse Width Mod- ulator (PWM) avail
8-bit RISC Microcontroller Application Note Rev. 2521B–AVR–01/04 AVR042: AVR® Hardware Design Considerations Features • Providing Robust Supply Voltage, Digital and Analog • Connecting the RESET Line • SPI Interface for In-System Programming • Using External Crystal or Ceramic Resonator Oscillators
8-bit Microcontroller Application Note AVR240: 4x4Keypad – Wake-up on Keypress Features Introduction
8-bit Microcontroller Application Note AVR240: 4x4Keypad – Wake-up on Keypress Features • 16 Key Pushbutton Pad in4x4Matrix • Very Low Power Consumption • AVR in Sleep Mode and Wakes Up on Keypress • Minimum External Components • ESD Protection Included if Necessary • Efficient Code • Complete Progr
Microcontrollers for Fluorescent and High Intensity Discharge Lamp Ballasts SMARTER, MORE FLEXIBLE LIGHTING SOLUTIONS
LIGHTINGMICROCONTROLLERSMicrocontrollers for Fluorescent and High Intensity Discharge Lamp Ballasts SMARTER, MORE FLEXIBLE LIGHTING SOLUTIONS Developed together with the industry leading lamp ballast manufac- turers, Atmel® microcontrollers are optimized for Linear and Dimmable Fluorescent tubes, as