Download: NPN General Purpose Amplifier

BC846A BC847A BC846B BC847B BC847CCCEESOT-23 B SOT-23 B Mark: 1A. / 1B. Mark: 1E. / 1F. / 1G. NPN General Purpose Amplifier This device is designed for low noise, high gain, general purpose amplifier applications at collector currents from 1.0 µA to 50 mA. Sourced from Process 07. Absolute Maximum Ratings* TA = 25°C unless otherwise noted 3 Symbol Parameter Value Units VCEO Collector-Emitter Voltage BC846 series 65 V BC847 series 45 V VCES Collector-Base Voltage BC846 series 80 V BC847 series 50 V VEBO Emitter-Base Voltage 6.0 V IC Collector Current - Continuous 100 mA TJ, Tstg Operating and S...
Author: Mewael Shared: 8/19/19
Downloads: 7 Views: 470

Content

BC846A BC847A BC846B BC847B BC847C

CCEESOT-23 B SOT-23 B Mark: 1A. / 1B. Mark: 1E. / 1F. / 1G.

NPN General Purpose Amplifier

This device is designed for low noise, high gain, general purpose amplifier applications at collector currents from 1.0 µA to 50 mA. Sourced from Process 07.

Absolute Maximum Ratings* TA = 25°C unless otherwise noted 3 Symbol Parameter Value Units

VCEO Collector-Emitter Voltage BC846 series 65 V BC847 series 45 V VCES Collector-Base Voltage BC846 series 80 V BC847 series 50 V VEBO Emitter-Base Voltage 6.0 V IC Collector Current - Continuous 100 mA TJ, Tstg Operating and Storage Junction Temperature Range -55 to +150 °C *These ratings are limiting values above which the serviceability of any semiconductor device may be impaired. NOTES: 1) These ratings are based on a maximum junction temperature of 150 degrees C. 2) These are steady state limits. The factory should be consulted on applications involving pulsed or low duty cycle operations.

Thermal Characteristics TA = 25°C unless otherwise noted Symbol Characteristic Max Units

*BC846 / BC847 PD Total Device Dissipation 325 mW Derate above 25°C 2.8 mW/°C RθJA Thermal Resistance, Junction to Ambient 357 °C/W *Device mounted on FR-4 PCB 40 mm X 40 mm X 1.5 mm. 1997 Fairchild Semiconductor Corporation

BC846A / BC846B / BC847A / BC847B / BC847C

,

NPN General Purpose Amplifier

(continued)

Electrical Characteristics TA = 25°C unless otherwise noted Symbol Parameter Test Conditions Min Max Units OFF CHARACTERISTICS

V(BR)CEO Collector-Emitter Breakdown IC = 10 mA, IB = 0 846A / B 65 V Voltage 847A / B 45 V(BR)CES Collector-Base Breakdown Voltage IC = 10 µA, IE = 0 846A / B 80 V 847A / B 50 V(BR)EBO Emitter-Base Breakdown Voltage IE = 10 µA, IC = 0 6.0 V ICBO Collector-Cutoff Current VCB = 30 V 15 nA VCB = 30 V, TA = 150°C 5.0 µA

ON CHARACTERISTICS

hFE DC Current Gain IC = 2.0 mA, VCE = 5.0 V 846A / 847A 110 220 846B / 847B 200 450 847C 420 800 VCE(sat) Collector-Emitter Saturation Voltage IC = 10 mA, IB = 0.5 mA 0.25 V IC = 100 mA, IB = 5.0 mA 0.6 V VBE(on) Base-Emitter On Voltage IC = 2.0 mA, VCE = 5.0 V 0.58 0.70 V IC = 10 mA, VCE = 5.0 V 0.77 V

SMALL SIGNAL CHARACTERISTICS

fT Current Gain - Bandwidth Product IC = 10 mA, VCE = 5.0, 100 MHz f = 100 MHz Cobo Output Capacitance VCB = 10 V, f = 1.0 MHz 4.5 pF NF Noise Figure IC = 0.2 mA, VCE = 5.0, 10 dB RS = 2.0 kΩ, f = 1.0 kHz, BW = 200 Hz

Typical Characteristics

Typical Pulsed Current Gain Collector-Emitter Saturation vs Collector Current Voltage vs Collector Current 1200 0.3VCE= 5.0 V 125 °C 1000 0.25 β = 10 800 0.2 125 °C 600 0.15 25 °C 400 0.1 25 °C - 40 °C 0.05 - 40 °C 0.01 0.03 0.1 0.31310 30 100 0.1 1 10 100IC- COLLECTOR CURRENT (mA) I C - COLLECTOR CURRENT (mA) hFE- TYPICAL PULSED CURRENT GAIN VCESAT- COLLECTOR-EMITTER VOLTAGE (V)

BC846A / BC846B / BC847A / BC847B / BC847C

,

NPN General Purpose Amplifier

(continued)

Typical Characteristics Base-Emitter Saturation Base-Emitter ON Voltage vs Voltage vs Collector Current Collector Current

1 1 - 40 °C 0.8 0.8 - 40 °C 25 °C 0.6 25 °C 0.6 125 °C 125 °C 0.4 0.4 β = 10VCE= 5.0 V 0.2 0.2 0.1 1 10 100 0.1 1 10 40IC- COLLECTOR CURRENT (mA) I C - COLLECTOR CURRENT (mA)

Collector-Cutoff Current Input and Output Capacitance

vs Ambient Temperature vs Reverse Bias Voltage 105V= 45V f = 1.0 MHzCB331Cte1Cob 0.1 0 25 50 75 100 125 15004812 16 20 T - AMBIENT TEMPERATURE ( ° C) REVERSE BIAS VOLTAGE (V)A

Normalized Collector-Cutoff Current Wideband Noise Frequency

vs Ambient Temperature vs Source Resistance 10005VCE= 5.0V4BANDWIDTH = 15.7 kHz 100IC= 100 µA3IC= 30 µA2IC= 10 µA 25 50 75 100 125 150 01,000 2,000 5,000 10,000 20,000 50,000 100,000TA- AMBIENT TEMPERATURE ( ° C) R S - SOURCE RESISTANCE (Ω ) CHARACTERIS TICS RELATI VE TO VALUE ATTA= 25 ° CICBO- COLLECTOR CURRENT (nA) VBESAT- COLLECTOR-EMITTER VOLTAGE (V) NF - NOISE FIGURE (dB) VBEON- BASE-EMITTER ON VOLTAGE (V)CAPACITANCE (pF)

BC846A / BC846B / BC847A / BC847B / BC847C

,

NPN General Purpose Amplifier

(continued)

Typical Characteristics (continued) Noise Figure vs Frequency Contours of Constant Gain

10 Bandwidth Product (f T ) I C = 200 µA, 10 R = 10 kΩ8S7175 MHzIC= 100 µA, R S = 10 kΩ5IC= 1.0 mA, R S = 500Ω3150 MHzIC= 1.0 mA, R S = 5.0 kΩ 2 125 MHz 2 100 MHzVCE= 5.0V 75 MHz010.0001 0.001 0.01 0.1 1 10 100 0.1 1 10 100 f - FREQUENCY (MHz) I C - COLLECTOR CURRENT (mA)

Contours of Constant Contours of Constant Narrow Band Noise Figure Narrow Band Noise Figure

10,000 10,000 3.0 dB 5,000 5,000 4.0 dB 2.0 dB 2,000 2,000 6.0 dB 3.0 dB 1,000 1,000 4.0d8B.0 dB 500VCE= 5.0 V 10 dBVCE= 5.0 V 6.0 dB f = 100 Hz f = 1.0 kHz BANDWIDTH 200 BANDWIDTH 200 8.0 dB = 20 Hz 12 dB = 200 Hz 14 dB 100 100 1 10 100 1,000 1 10 100 1,000IC- COLLECTOR CURRENT ( µ A) I C - COLLECTOR CURRENT ( µ A)

Contours of Constant Contours of Constant Narrow Band Noise Figure Narrow Band Noise Figure

10000 10000 5000 5000 1.0 dB 2000 2.0 dB 2000 2.0 dB 1000 3.0 dB 1000 3.0 dB 4.0 dB 500 500VCE= 4.0 dBVCE= 5.0V 5.0 6.0 d 5.0V dB f = 10kHzBf= 1.0 MHz 6.0 200 BANDWIDTH 200 8.0 dB BANDWIDTH 7.0 dB dB = 2.0kHz = 200kHz 8.0 100 dB100 1 10 100 1000 0.01 0.1 1 10IC- COLLECTOR CURRENT ( µ A) I C - COLLECTOR CURRENT ( µ A) R S - SOURCE RESISTANCE (Ω ) R S - SOURCE RESISTANCE ( Ω ) NF - NOISE FIGURE (dB) R S - SOURCE RESISTANCE (Ω ) R S - SOURCE RESISTANCE ( Ω ) VCE- COLLECTOR VOLTAGE (V)

BC846A / BC846B / BC847A / BC847B / BC847C

,

NPN General Purpose Amplifier

(continued)

Typical Common Emitter Characteristics (f = 1.0 kHz) Typical Common Emitter Characteristics Typical Common Emitter Characteristics

1.4 1.5 h fe 1.4 1.3VCE= 5.0V h ie h 1.3 rehf= 1.0kHzie h fe h 1.2IC= 1.0mA 1.2 oe h oe h re 1.1 1.11hoe h re 0.91hie 0.8 h oeIC= 1.0mA 0.7 h fe 0.9 f = 1.0kHz h feTA= 25° C h0.6 h re ie 0.8 0.50510 15 20 25 -100 -50 0 50 100 150VCE- COLLECTOR VOLTAGE (V) T J - JUNCTIO N TEMPERATURE ( ° C)

Typical Common Emitter Characteristics

f = 1.0kHz hoehieandhrehre 1 hoe3hfe h ie h fe 0.1 0.01 0.1 0.2 0.512510 20 50 100IC- COLLECTOR CURRENT (mA) CHARACTERISTICS RELATIVE TO VALUE(VC E =5V) CHARACTERISTICS RELATIVE TO VALUE(I C =1mA) CHARACTE RISTICS RE LATIV E TO VALUE (TA =25° C)

BC846A / BC846B / BC847A / BC847B / BC847C

,

SOT-23 Tape and Reel Data SOT-23 Packaging Configuration: Figure 1.0 Customized Label Packaging Description:

SOT-23 parts are shipped in tape. The carrier tape is made from a dissipative (carbon fil led) polycarbonate resin. The cover tape is a multilayer film (Heat Activated Adhesive in nature) primarily composed of polyester film, adhesive layer, sealant, and anti-static sprayed agent.

Antistatic Cover Tape These reeled parts in standard option are shipped with3,000 units per 7" or 177cm diameter reel. The reels are

dark blue in color and is made of polystyrene plastic (anti- static coated). Other option comes in 10,000 units per 13" or 330cm diameter reel. This and some other options are described in the Packaging Information table. These full reels are individually labeled and placed inside a standard intermediate made of recyclable corrugated brown paper with a Fairchil d logo printing. One pizza box contains eight reels maximum. And these intermediate boxes are placed inside a labeled shipping box which comes in different sizes depending on the number of parts

Human Readable shipped.Embossed Label Carrier Tape

3P 3P 3P 3P SOT-23 Packaging Information Standard Packaging Option (no flow code) D87Z Packaging type TNR TNR SOT-23 Unit Or ientation Qty per Reel/Tube/Bag 3,000 10,000 Reel Size 7" Dia 13" Box Dimension (mm) 187x107x183 343x343x64 343mm x 342mm x 64mm Human Readable Label Max qty per Box 24,000 30,000

Intermediate box for L87Z Option

Weight per unit (gm) 0.0082 0.0082 Weight per Reel (kg) 0.1175 0.4006 Note/Comments

Human Readable Label sample Human readable Label

187mm x 107mm x 183mm

SOT-23 Tape Leader and Trailer Intermediate Box for Standard Option Configuration: Figure 2.0

Carrier Tape Cover Tape ComponentsTrailer Tape Leader Tape 300mm minimum or 500mm minimum or 75 empty pockets 125 empty pockets ©2000 Fairchild Semiconductor International September 1999, Rev. C,

SOT-23 Tape and Reel Data, continued SOT-23 Embossed Carrier Tape Configuration: Figure 3.0

P0 P2 D0 D1

T

E1FWE2 B0 Wc Tc P1 A0 K0

User Direction of Feed

Dimensions are in millimeter Pkg type A0 B0 W D0 D1 E1 E2 F P1 P0 K0 T Wc Tc SOT-23 3.15 2.77 8.0 1.55 1.125 1.75 6.25 3.50 4.0 4.0 1.30 0.228 5.2 0.06 (8mm) +/-0.10 +/-0.10 +/-0.3 +/-0.05 +/-0.125 +/-0.10 min +/-0.05 +/-0.1 +/-0.1 +/-0.10 +/-0.013 +/-0.3 +/-0.02 Notes: A0, B0, and K0 dimensions are determined with respect to the EIA/Jedec RS-481 rotational and lateral movement requirements (see sketches A, B, and C). 0.5mm 20 deg maximum maximum Typical component cavity 0.5mm B0 center line maximum 20 deg maximum component rotation Typical Sketch A (Side or Front Sectional View) component Sketch C (Top View) Component Rotation A0 center line Component lateral movement Sketch B (Top View)

SOT-23 Reel Configuration: Figure 4.0 Component Rotation

W1 Measured at Hub Dim A Max Dim A See detail AA max Dim N 7" Diameter Option B Min Dim C See detail AA Dim D W3 min 13" Diameter Option W2 max Measured at Hub DETAIL AA Dimensions are in inches and millimeters Reel Tape Size Option Dim A Dim B Dim C Dim D Dim N Dim W1 Dim W2 Dim W3 (LSL-USL) 8mm 7" Dia 7.00 0.059 512 +0.020/-0.008 0.795 2.165 0.331 +0.059/-0.000 0.567 0.311 – 0.429177.8 1.5 13 +0.5/-0.2 20.2 55 8.4 +1.5/0 14.4 7.9 – 10.9 8mm 13" Dia 13.00 0.059 512 +0.020/-0.008 0.795 4.00 0.331 +0.059/-0.000 0.567 0.311 – 0.429330 1.5 13 +0.5/-0.2 20.2 100 8.4 +1.5/0 14.4 7.9 – 10.9

September 1999, Rev. C

,

SOT-23 Package Dimensions SOT-23 (FS PKG Code 49)

1:1 Scale 1:1 on letter size paper Dimensions shown below are in: inches [millimeters] Part Weight per unit (gram): 0.0082 ©2000 Fairchild Semiconductor International September 1998, Rev. A1,

SOT-23 Tape and Reel Data SOT-23 Packaging Configuration: Figure 1.0 Customized Label Packaging Description:

SOT-23 parts are shipped in tape. The carrier tape is made from a dissipative (carbon fil led) polycarbonate resin. The cover tape is a multilayer film (Heat Activated Adhesive in nature) primarily composed of polyester film, adhesive layer, sealant, and anti-static sprayed agent.

Antistatic Cover Tape These reeled parts in standard option are shipped with3,000 units per 7" or 177cm diameter reel. The reels are

dark blue in color and is made of polystyrene plastic (anti- static coated). Other option comes in 10,000 units per 13" or 330cm diameter reel. This and some other options are described in the Packaging Information table. These full reels are individually labeled and placed inside a standard intermediate made of recyclable corrugated brown paper with a Fairchil d logo printing. One pizza box contains eight reels maximum. And these intermediate boxes are placed inside a labeled shipping box which comes in different sizes depending on the number of parts

Human Readable shipped.Embossed Label Carrier Tape

3P 3P 3P 3P SOT-23 Packaging Information Standard Packaging Option (no flow code) D87Z Packaging type TNR TNR SOT-23 Unit Or ientation Qty per Reel/Tube/Bag 3,000 10,000 Reel Size 7" Dia 13" Box Dimension (mm) 187x107x183 343x343x64 343mm x 342mm x 64mm Human Readable Label Max qty per Box 24,000 30,000

Intermediate box for L87Z Option

Weight per unit (gm) 0.0082 0.0082 Weight per Reel (kg) 0.1175 0.4006 Note/Comments

Human Readable Label sample Human readable Label

187mm x 107mm x 183mm

SOT-23 Tape Leader and Trailer Intermediate Box for Standard Option Configuration: Figure 2.0

Carrier Tape Cover Tape ComponentsTrailer Tape Leader Tape 300mm minimum or 500mm minimum or 75 empty pockets 125 empty pockets ©2000 Fairchild Semiconductor International September 1999, Rev. C,

SOT-23 Tape and Reel Data, continued SOT-23 Embossed Carrier Tape Configuration: Figure 3.0

P0 P2 D0 D1

T

E1FWE2 B0 Wc Tc P1 A0 K0

User Direction of Feed

Dimensions are in millimeter Pkg type A0 B0 W D0 D1 E1 E2 F P1 P0 K0 T Wc Tc SOT-23 3.15 2.77 8.0 1.55 1.125 1.75 6.25 3.50 4.0 4.0 1.30 0.228 5.2 0.06 (8mm) +/-0.10 +/-0.10 +/-0.3 +/-0.05 +/-0.125 +/-0.10 min +/-0.05 +/-0.1 +/-0.1 +/-0.10 +/-0.013 +/-0.3 +/-0.02 Notes: A0, B0, and K0 dimensions are determined with respect to the EIA/Jedec RS-481 rotational and lateral movement requirements (see sketches A, B, and C). 0.5mm 20 deg maximum maximum Typical component cavity 0.5mm B0 center line maximum 20 deg maximum component rotation Typical Sketch A (Side or Front Sectional View) component Sketch C (Top View) Component Rotation A0 center line Component lateral movement Sketch B (Top View)

SOT-23 Reel Configuration: Figure 4.0 Component Rotation

W1 Measured at Hub Dim A Max Dim A See detail AA max Dim N 7" Diameter Option B Min Dim C See detail AA Dim D W3 min 13" Diameter Option W2 max Measured at Hub DETAIL AA Dimensions are in inches and millimeters Reel Tape Size Option Dim A Dim B Dim C Dim D Dim N Dim W1 Dim W2 Dim W3 (LSL-USL) 8mm 7" Dia 7.00 0.059 512 +0.020/-0.008 0.795 2.165 0.331 +0.059/-0.000 0.567 0.311 – 0.429177.8 1.5 13 +0.5/-0.2 20.2 55 8.4 +1.5/0 14.4 7.9 – 10.9 8mm 13" Dia 13.00 0.059 512 +0.020/-0.008 0.795 4.00 0.331 +0.059/-0.000 0.567 0.311 – 0.429330 1.5 13 +0.5/-0.2 20.2 100 8.4 +1.5/0 14.4 7.9 – 10.9

September 1999, Rev. C

,

SOT-23 Package Dimensions SOT-23 (FS PKG Code 49)

1:1 Scale 1:1 on letter size paper Dimensions shown below are in: inches [millimeters] Part Weight per unit (gram): 0.0082 ©2000 Fairchild Semiconductor International September 1998, Rev. A1,

TRADEMARKS

The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks.

ACEx™ FASTr™ PowerTrench SyncFET™ Bottomless™ GlobalOptoisolator™ QFET™ TinyLogic™ CoolFET™ GTO™ QS™ UHC™ CROSSVOLT™ HiSeC™ QT Optoelectronics™ VCX™ DOME™ ISOPLANAR™ Quiet Series™ E2CMOSTM MICROWIRE™ SILENT SWITCHER EnSignaTM OPTOLOGIC™ SMART START™ FACT™ OPTOPLANAR™ SuperSOT™-3 FACT Quiet Series™ PACMAN™ SuperSOT™-6 FAST POP™ SuperSOT™-8 DISCLAIMER

FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or 2. A critical component is any component of a life systems which, (a) are intended for surgical implant into support device or system whose failure to perform can the body, or (b) support or sustain life, or (c) whose be reasonably expected to cause the failure of the life failure to perform when properly used in accordance support device or system, or to affect its safety or with instructions for use provided in the labeling, can be effectiveness. reasonably expected to result in significant injury to the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative or This datasheet contains the design specifications for In Design product development. Specifications may change in any manner without notice. Preliminary First Production This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. Rev. G]
15

Similar documents

hFE Classification
BC817/BC818 Switching and Amplifier Applications • Suitable for AF-Driver stages and low power output stages • Complement to BC807/BC808 1 SOT-23 1. Base 2. Emitter 3. Collector NPN Epitaxial Silicon Transistor Absolute Maximum Ratings Ta=25°C unless otherwise noted Symbol Parameter Value Units VCES
NPN General Purpose Amplifier
BC817-25 BC817-40CESOT-23 B Mark: 6B. / 6C. NPN General Purpose Amplifier This device is designed for general purpose medium power amplifiers and switches requiring collector currents to 1.2 A. Sourced from Process 38. Absolute Maximum Ratings* TA = 25°C unless otherwise noted Symbol Parameter Value
Typical Characteristics
BC636/638/640 Switching and Amplifier Applications • Complement to BC635/637/639 1 TO-92 1. Emitter 2. Collector 3. Base PNP Epitaxial Silicon Transistor Absolute Maximum Ratings Ta=25°C unless otherwise noted Symbol Parameter Value Units VCER Collector-Emitter Voltage at RBE=1KΩ : BC636 -45 V VCES
Order this document SEMICONDUCTOR TECHNICAL DATA by BC636/D PNP Silicon
Order this document SEMICONDUCTOR TECHNICAL DATA by BC636/D PNP Silicon COLLECTOR BASE EMITTER MAXIMUM RATINGS 2 BC BC BC Rating Symbol 636 638 640 Unit CASE 29–04, STYLE 14 Collector–Emitter Voltage VCEO –45 –60 –80 Vdc TO–92 (TO–226AA) Collector–Base Voltage VCBO –45 –60 –80 Vdc Emitter–Base Volta
DISCRETE SEMICONDUCTORS DATA SHEET BGY208 UHF amplifier module Objective specification 1996 May 22 File under Discrete Semiconductors, SC09
DISCRETE SEMICONDUCTORS DATA SHEET BGY208 UHF amplifier module Objective specification 1996 May 22 File under Discrete Semiconductors, SC09 FEATURES PINNING - SOT388A • 6.8 V nominal supply voltage PIN DESCRIPTION • 3.5 W output power 1 RF input • Easy output power control by DC voltage. 2 VC 3 VS A
DISCRETE SEMICONDUCTORS DATA SHEET BGY207 UHF amplifier module Objective specification 1996 May 22 File under Discrete Semiconductors, SC09
DISCRETE SEMICONDUCTORS DATA SHEET BGY207 UHF amplifier module Objective specification 1996 May 22 File under Discrete Semiconductors, SC09 FEATURES PINNING - SOT359A • 4.8 V nominal supply voltage PIN DESCRIPTION • 1.2 W output power 1 RF input • Easy output power control by DC voltage. 2 VC 3 VS A
DISCRETE SEMICONDUCTORS DATA SHEET BGY206 UHF amplifier module Preliminary specification 1996 May 29 File under Discrete Semiconductors, SC09
DISCRETE SEMICONDUCTORS DATA SHEET BGY206 UHF amplifier module Preliminary specification 1996 May 29 File under Discrete Semiconductors, SC09 FEATURES PINNING - SOT388A • 4.8 V nominal supply voltage PIN DESCRIPTION • 3 W output power 1 RF input • Easy control of output power by DC voltage. 2 VC 3 V
DISCRETE SEMICONDUCTORS DATA SHEET BGY205 UHF amplifier module Product specification 1996 May 21 Supersedes data of May 1994 File under Discrete Semiconductors, SC09
DISCRETE SEMICONDUCTORS DATA SHEET BGY205 UHF amplifier module Product specification 1996 May 21 Supersedes data of May 1994 File under Discrete Semiconductors, SC09 FEATURES PINNING - SOT321B • 6 V nominal supply voltage PIN DESCRIPTION • 3.5 W pulsed output power 1 RF input • Easy control of outpu
DISCRETE SEMICONDUCTORS DATA SHEET BGY203 UHF amplifier module Product specification 1996 May 23 Supersedes data of May 1994 File under Discrete Semiconductors, SC09
DISCRETE SEMICONDUCTORS DATA SHEET BGY203 UHF amplifier module Product specification 1996 May 23 Supersedes data of May 1994 File under Discrete Semiconductors, SC09 FEATURES PINNING - SOT342A • 6 V nominal supply voltage PIN DESCRIPTION • 3.2 W output power 1 RF input • Easy control of output power
DISCRETE SEMICONDUCTORS DATA SHEET BGY201 UHF amplifier module Product specification 1996 May 22 Supersedes data of June 1994 File under Discrete Semiconductors, SC09
DISCRETE SEMICONDUCTORS DATA SHEET BGY201 UHF amplifier module Product specification 1996 May 22 Supersedes data of June 1994 File under Discrete Semiconductors, SC09 FEATURES PINNING - SOT278A • 12.5 V nominal supply voltage PIN DESCRIPTION • 14 W output power 1 RF input • Easy control of output po
DATA SHEET BGY1816 UHF amplifier module
DISCRETE SEMICONDUCTORS DATA SHEET BGY1816 UHF amplifier module Preliminary specification 1996 Feb 05 File under Discrete Semiconductors, SC08b FEATURES DESCRIPTION • 26 V nominal supply voltage The BGY1816 is a three-stage UHF amplifier module in a • 16 W output power into a load of 50 Ω with an RF
DATA SHEET BGY172 UHF amplifier module
DISCRETE SEMICONDUCTORS DATA SHEET BGY172 UHF amplifier module Objective specification 1996 May 22 File under Discrete Semiconductors, SC09 FEATURES PINNING - SOT434A • 7.2 V nominal supply voltage PIN DESCRIPTION • 5 W output power 1 RF input + VC • Easy output power control by DC voltage. 2 VS1 3
DISCRETE SEMICONDUCTORS DATA SHEET BGY148A; BGY148B UHF amplifier modules Preliminary specification 1996 May 20 File under Discrete Semiconductors, SC09
DISCRETE SEMICONDUCTORS DATA SHEET BGY148A; BGY148B UHF amplifier modules Preliminary specification 1996 May 20 File under Discrete Semiconductors, SC09 FEATURES PINNING - SOT421A • Single6Vnominal supply voltage PIN DESCRIPTION • 3 W output power 1 RF input • Easy control of output power by DC volt
DATA SHEET BGY152A; BGY152B UHF amplifier modules
DISCRETE SEMICONDUCTORS DATA SHEET BGY152A; BGY152B UHF amplifier modules Preliminary specification 1996 May 21 File under Discrete Semiconductors, SC09 FEATURES PINNING - SOT434A • 7.2 V nominal supply voltage PIN DESCRIPTION • 7 W output power 1 RF input + VC • Easy output power control by DC volt
DISCRETE SEMICONDUCTORS DATA SHEET BGY143 VHF power amplifier module Product specification 1996 May 21 Supersedes data of June 1993 File under Discrete Semiconductors, SC09
DISCRETE SEMICONDUCTORS DATA SHEET BGY143 VHF power amplifier module Product specification 1996 May 21 Supersedes data of June 1993 File under Discrete Semiconductors, SC09 FEATURES PINNING - SOT132B • 12.5 V nominal supply voltage PIN DESCRIPTION • 13 W output power. 1 RF input 2 ground APPLICATION
DISCRETE SEMICONDUCTORS DATA SHEET BGY135; BGY136 VHF power amplifier modules Product specification 1996 May 08 Supersedes data of June 1993 File under Discrete Semiconductors, SC09
DISCRETE SEMICONDUCTORS DATA SHEET BGY135; BGY136 VHF power amplifier modules Product specification 1996 May 08 Supersedes data of June 1993 File under Discrete Semiconductors, SC09 FEATURES PINNING - SOT132B • 12.5 V nominal supply voltage PIN DESCRIPTION • 18 W output power. 1 RF input 2 ground AP
DISCRETE SEMICONDUCTORS DATA SHEET BGY122A; BGY122B UHF amplifier modules Preliminary specification 1996 Apr 26 File under Discrete Semiconductors, SC09
DISCRETE SEMICONDUCTORS DATA SHEET BGY122A; BGY122B UHF amplifier modules Preliminary specification 1996 Apr 26 File under Discrete Semiconductors, SC09 FEATURES PINNING - SOT388A • Single 4.8 V nominal supply voltage PIN DESCRIPTION • 1.2 W output power 1 RF input • Easy control of output power by
DISCRETE SEMICONDUCTORS DATA SHEET BGY120A; BGY120B; BGY120D UHF amplifier modules Objective specification 1996 May 29 File under Discrete Semiconductors, SC09
DISCRETE SEMICONDUCTORS DATA SHEET BGY120A; BGY120B; BGY120D UHF amplifier modules Objective specification 1996 May 29 File under Discrete Semiconductors, SC09 FEATURES PINNING - SOT388A • Single 3.6 V nominal supply voltage PIN DESCRIPTION • 1.2 W output power 1 RF input • Easy control of output po
DISCRETE SEMICONDUCTORS DATA SHEET BGY119A; BGY119B UHF amplifier modules Product specification 1996 May 08 Supersedes data of April 1994 File under Discrete Semiconductors, SC09
DISCRETE SEMICONDUCTORS DATA SHEET BGY119A; BGY119B UHF amplifier modules Product specification 1996 May 08 Supersedes data of April 1994 File under Discrete Semiconductors, SC09 FEATURES PINNING - SOT359A • Single 4.8 V nominal supply voltage PIN DESCRIPTION • 1.2 W output power 1 RF input • Easy c
DISCRETE SEMICONDUCTORS DATA SHEET BGY118A; BGY118B; BGY118D UHF amplifier modules Product specification 1996 May 21 Supersedes data of April 1994 File under Discrete Semiconductors, SC09
DISCRETE SEMICONDUCTORS DATA SHEET BGY118A; BGY118B; BGY118D UHF amplifier modules Product specification 1996 May 21 Supersedes data of April 1994 File under Discrete Semiconductors, SC09 FEATURES PINNING SOT321A • Single 4.8 V nominal supply voltage PIN DESCRIPTION • 1.2 W output power 1 RF input •
DISCRETE SEMICONDUCTORS DATA SHEET BGY116D; BGY116E UHF amplifier modules Product specification 1996 May 08 Supersedes data of April 1994 File under Discrete Semiconductors, SC09
DISCRETE SEMICONDUCTORS DATA SHEET BGY116D; BGY116E UHF amplifier modules Product specification 1996 May 08 Supersedes data of April 1994 File under Discrete Semiconductors, SC09 FEATURES PINNING - SOT278B • 12.5 V nominal supply voltage PIN DESCRIPTION • 6 W output power 1 RF input • Easy control o
DISCRETE SEMICONDUCTORS DATA SHEET BGY115A; BGY115B; BGY115C/P; BGY115D UHF amplifier modules Product specification 1996 May 13 Supersedes data of May 1994
DISCRETE SEMICONDUCTORS DATA SHEET BGY115A; BGY115B; BGY115C/P; BGY115D UHF amplifier modules Product specification 1996 May 13 Supersedes data of May 1994 File under Discrete Semiconductors, SC09 FEATURES PINNING - SOT321A • 6 V nominal supply voltage1996 May 13 PIN DESCRIPTION • 1.2 W output power
DISCRETE SEMICONDUCTORS DATA SHEET BGY114D; BGY114E UHF amplifier modules Product specification 1996 Jun 04 Supersedes data of April 1994 File under Discrete Semiconductors, SC09
DISCRETE SEMICONDUCTORS DATA SHEET BGY114D; BGY114E UHF amplifier modules Product specification 1996 Jun 04 Supersedes data of April 1994 File under Discrete Semiconductors, SC09 FEATURES PINNING - SOT278A • 12.5 V nominal supply voltage PIN DESCRIPTION • 6 W output power 1 RF input • Easy control o
DISCRETE SEMICONDUCTORS DATA SHEET BGY113A; BGY113B UHF amplifier modules Preliminary specification 1996 May 29 Supersedes data of April 1994 File under Discrete Semiconductors, SC09
DISCRETE SEMICONDUCTORS DATA SHEET BGY113A; BGY113B UHF amplifier modules Preliminary specification 1996 May 29 Supersedes data of April 1994 File under Discrete Semiconductors, SC09 FEATURES PINNING - SOT288D • 7.5 V nominal supply voltage PIN DESCRIPTION • 7 W output power 1 RF input • Easy contro
DISCRETE SEMICONDUCTORS DATA SHEET BGY110D; BGY110E; BGY110F; BGY110G UHF amplifier modules Product specification 1996 May 06 Supersedes data of May 1992
DISCRETE SEMICONDUCTORS DATA SHEET BGY110D; BGY110E; BGY110F; BGY110G UHF amplifier modules Product specification 1996 May 06 Supersedes data of May 1992 File under Discrete Semiconductors, SC09 FEATURES PINNING - SOT246 • 7.2 V nominal supply voltage PIN DESCRIPTION • 1.7 W output power 1 RF input/
DATA SHEET BGE885 CATV amplifier module
DISCRETE SEMICONDUCTORS DATA SHEET BGE885 CATV amplifier module Product specification 1995 Nov 09 Supersedes data of February 1995 File under Discrete Semiconductors, SC16 FEATURES PINNING - SOT115D • Excellent linearity PIN DESCRIPTION • Extremely low noise 1 input; note 1 • Rugged construction fpa
DISCRETE SEMICONDUCTORS DATA SHEET BGD802MI Hybrid CATV amplifier module Product specification 1996 Jul 15 File under Discrete Semiconductors, SC16
DISCRETE SEMICONDUCTORS DATA SHEET BGD802MI Hybrid CATV amplifier module Product specification 1996 Jul 15 File under Discrete Semiconductors, SC16 FEATURES PINNING - SOT115J2 • Excellent linearity PIN DESCRIPTION • Extremely low noise 1 output • Excellent return loss properties 2 common • Silicon n
DISCRETE SEMICONDUCTORS DATA SHEET BGD802 Hybrid CATV amplifier module Product specification 1996 Jul 15 Supersedes data of 1996 Apr 25 File under Discrete Semiconductors, SC16
DISCRETE SEMICONDUCTORS DATA SHEET BGD802 Hybrid CATV amplifier module Product specification 1996 Jul 15 Supersedes data of 1996 Apr 25 File under Discrete Semiconductors, SC16 FEATURES PINNING - SOT115J2 • Excellent linearity PIN DESCRIPTION • Extremely low noise 1 input • Excellent return loss pro
DISCRETE SEMICONDUCTORS DATA SHEET BGD702MI Hybrid CATV amplifier module Product specification 1996 Jul 15 File under Discrete Semiconductors, SC16
DISCRETE SEMICONDUCTORS DATA SHEET BGD702MI Hybrid CATV amplifier module Product specification 1996 Jul 15 File under Discrete Semiconductors, SC16 FEATURES PINNING - SOT115J2 • Excellent linearity PIN DESCRIPTION • Extremely low noise 1 output • Silicon nitride passivation 2 common • Rugged constru
DISCRETE SEMICONDUCTORS DATA SHEET BFT92W PNP 4 GHz wideband transistor Product specification May 1994 File under Discrete Semiconductors, SC14 Philips Semiconductors
DISCRETE SEMICONDUCTORS DATA SHEET BFT92W PNP 4 GHz wideband transistor Product specification May 1994 File under Discrete Semiconductors, SC14 Philips Semiconductors FEATURES DESCRIPTION handbook, 2 columns • 3High power gain Silicon PNP transistor in a plastic, • Gold metallization ensures SOT323