Download: Order this document SEMICONDUCTOR TECHNICAL DATA by MRS1504T3/D SMB Power Surface Mount Package

Order this document SEMICONDUCTOR TECHNICAL DATA by MRS1504T3/D SMB Power Surface Mount Package Features mesa epitaxial construction with glass passivation. STANDARD RECOVERY Ideally suited for high frequency switching power supplies; free RECTIFIER wheeling diodes and polarity protection diodes. 1.5 AMPERES 400 VOLTS • Compact Package with J–Bend Leads Ideal for Automated Handling • Stable, High Temperature, Glass Passivated Junction Mechanical Characteristics: • Case: Molded Epoxy • Epoxy Meets UL94, VO at 1/8″ • Weight: 95 mg (approximately) • Finish: All External Surfaces Corrosion Resista...
Author: เดชเพียร Shared: 8/19/19
Downloads: 100 Views: 828

Content

Order this document SEMICONDUCTOR TECHNICAL DATA by MRS1504T3/D SMB Power Surface Mount Package

Features mesa epitaxial construction with glass passivation. STANDARD RECOVERY Ideally suited for high frequency switching power supplies; free RECTIFIER wheeling diodes and polarity protection diodes. 1.5 AMPERES 400 VOLTS • Compact Package with J–Bend Leads Ideal for Automated Handling • Stable, High Temperature, Glass Passivated Junction Mechanical Characteristics: • Case: Molded Epoxy • Epoxy Meets UL94, VO at 1/8″ • Weight: 95 mg (approximately) • Finish: All External Surfaces Corrosion Resistant and Terminal Leads CASE 403A–03 are Readily Solderable SMB • Maximum Temperature of 260°C / 10 Seconds for Soldering • Available in 12 mm Tape, 2500 Units per 13 inch Reel, Add “T3” Suffix to Part Number • Polarity: Notch in Plastic Body Indicates Cathode Lead • Marking: RGG MAXIMUM RATINGS Rating Symbol Value Unit Peak Repetitive Reverse Voltage VRRM 400 V Working Peak Reverse Voltage VRWM DC Blocking Voltage VR Average Rectified Forward Current IO 1.5 A (At Rated VR, TI = 118°C) Peak Repetitive Forward Current IFRM 3.0 A (At Rated VR, Square Wave, 20 kHz, TI = 118°C) Non–Repetitive Peak Surge Current IFSM 50 A (Surge applied at rated load conditions, halfwave, single phase, 60 Hz) Storage / Operating Case Temperature Tstg, TC –55 to 150 °C Operating Junction Temperature TJ –55 to 150 °C THERMAL CHARACTERISTICS Thermal Resistance – Junction–to–Lead (2) Rtjl 18 °C/W Thermal Resistance – Junction–to–Ambient (on 1″ sq. Cu. PCB pattern) Rtja 79 ELECTRICAL CHARACTERISTICS Maximum Instantaneous Forward Voltage (1), see Figure 2 VF TJ = 25°C TJ = 100°C V (IF = 1.5 A) 1.04 0.96 (IF = 2.25 A) 1.10 1.02 Maximum Instantaneous Reverse Current, see Figure 4 IR TJ = 25°C TJ = 100°C A (VR = 400 V) 1.0 340 (VR = 200 V) 0.5 180 (1) Pulse Test: Pulse Width ≤ 250 µs, Duty Cycle ≤ 2.0%. (2) Minimum pad size This document contains information on a new product. Specifications and information herein are subject to change without notice. REV1RMeoctotriofilea,r InDce. 1v9ic97e Data 1, 100 100 10 10 TJ = 100°C T = 100°C TJ = 150°C

J

1.0 1.0 T = 150°C

J

TJ = –40°C 0.1 0.1 0.6 0.8 1.0 1.2 1.4 1.6 0.6 0.8 1.0 1.2 1.4 1.6 VF, INSTANTANEOUS FORWARD VOLTAGE (VOLTS) VF, MAXIMUM INSTANTANEOUS FORWARD VOLTAGE (VOLTS)

Figure 1. Typical Forward Voltage Figure 2. Maximum Forward Voltage

100E–6 10E–3 TJ = 150°C1.0E–3 10E–6 TJ = 150°C TJ = 100°C 100E–6 TJ = 100°C 10E–6 100E–9 T = 25°C TJ = 25°C 10E–9 J 100E–9 1.0E–9 10E–9 0 100 200 300 400 0 100 200 300 400 VR, REVERSE VOLTAGE (VOLTS) VR, REVERSE VOLTAGE (VOLTS)

Figure 3. Typical Reverse Current Figure 4. Maximum Reverse Current

2.5 2.5 FREQ = 20 kHz dc dc 2.0 2.0 SQUARE WAVE SQUARE WAVE Ipk/Io = 1.5 1.5 Ipk/Io = 5Ipk/Io = Ipk/Io = 10I 1.0 pk /Io = 5 1.0 Ipk/Io = 10 Ipk/Io = 20 0.5 Ipk/Io = 20 0.500020 40 60 80 100 120 140 160 0 0.5 1.0 1.5 2.0 2.5 TL, LEAD TEMPERATURE (°C) IO, AVERAGE FORWARD CURRENT (AMPS)

Figure 5. Current Derating Figure 6. Forward Power Dissipation

2 Rectifier Device Data IO, AVERAGE FORWARD CURRENT (AMPS) IR, REVERSE CURRENT (AMPS) IF, INSTANTANEOUS FORWARD CURRENT (AMPS) I , MAXIMUM REVERSE CURRENT (AMPS) PFO, AVERAGE POWER DISSIPATION (WATTS) R IF, INSTANTANEOUS FORWARD CURRENT (AMPS), TJ = 25°C 0 10 20 30 40 50 60 70 80 VR, REVERSE VOLTAGE (VOLTS)

Figure 7. Capacitance

50% 20% 10% 0.1 5.0% 2.0% 1.0% 0.01 Rtjl(t) = Rtjl*r(t) 0.001 0.00001 0.0001 0.001 0.01 0.1 1.0 10 100 T, TIME (s)

Figure 8. Thermal Response Junction to Lead

1.0 50% 20% 0.1 10% 5.0% 2.0% 0.01 1.0% Rtjl(t) = Rtjl*r(t) 0.001 0.00001 0.0001 0.001 0.01 0.1 1.0 10 100 1,000 T, TIME (s)

Figure 9. Thermal Response Junction to Ambient Rectifier Device Data 3

R(T), TRANSIENT THERMAL RESISTANCE (NORMALIZED) R(T), TRANSIENT THERMAL RESISTANCE (NORMALIZED) C, CAPACITANCE (pF), 0.089 2.261 0.108 2.743 0.085 2.159 inches mm

SMB PACKAGE DIMENSIONS S A NOTES:

1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. D DIMENSION SHALL BE MEASURED WITHIN DIMENSION P.

D B

INCHES MILLIMETERS DIM MIN MAX MIN MAX A 0.160 0.180 4.06 4.57 B 0.130 0.150 3.30 3.81 C 0.075 0.095 1.90 2.41 D 0.077 0.083 1.96 2.11 H 0.0020 0.0060 0.051 0.152 J 0.006 0.012 0.15 0.30

C K 0.030 0.050 0.76 1.27

P 0.020 REF 0.51 REF S 0.205 0.220 5.21 5.59

H K P J CASE 403A–03 ISSUE B

Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters which may be provided in Motorola data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. Mfax is a trademark of Motorola, Inc. How to reach us: USA/EUROPE/Locations Not Listed: Motorola Literature Distribution; JAPAN: Nippon Motorola Ltd.: SPD, Strategic Planning Office, 4–32–1, P.O. Box 5405, Denver, Colorado 80217. 1–303–675–2140 or 1–800–441–2447 Nishi–Gotanda, Shinagawa–ku, Tokyo 141, Japan. 81–3–5487–8488 Customer Focus Center: 1–800–521–6274 Mfax: email is hidden – TOUCHTONE 1–602–244–6609 ASIA/PACIFIC: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park, Motorola Fax Back System – US & Canada ONLY 1–800–774–1848 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852–26629298 – http://sps.motorola.com/mfax/ HOME PAGE: http://motorola.com/sps/ 4 ◊ Rectifier MDeRvSi1c5e0 D4Ta3ta/D]
15

Similar documents

Order this document SEMICONDUCTOR TECHNICAL DATA by MR850/D
Order this document SEMICONDUCTOR TECHNICAL DATA by MR850/D Axial lead mounted fast recovery power rectifiers are designed for special applications such as dc power supplies, inverters, converters, ultrasonic systems, choppers, low RF interference and free wheeling diodes. A complete line of fast re
Order this document SEMICONDUCTOR TECHNICAL DATA by MR750/D
Order this document SEMICONDUCTOR TECHNICAL DATA by MR750/D • Current Capacity Comparable to Chassis Mounted Rectifiers • Very High Surge Capacity • Insulated Case Mechanical Characteristics: • Case: Epoxy, Molded MR754 and MR760 are Motorola Preferred Devices • Weight: 2.5 grams (approximately) •
Order this document SEMICONDUCTOR TECHNICAL DATA by MR2835S/D  • High Power Capability SUPPRESSOR • Economical 24 V – 32 V
Order this document SEMICONDUCTOR TECHNICAL DATA by MR2835S/D .designed for applications requiring a diode with reverse avalanche characteris- tics for use as reverse power transient suppressor. Developed to suppress transients in the automotive system, this device operates in reverse mode as power
Order this document SEMICONDUCTOR TECHNICAL DATA by MR2535L/D
Order this document SEMICONDUCTOR TECHNICAL DATA by MR2535L/D .designed for applications requiring a low voltage rectifier with reverse avalanche characteristics for use as reverse power transient suppressors. Developed to suppress transients in the automotive system, these devices MEDIUM CURRENT op
Order this document SEMICONDUCTOR TECHNICAL DATA by MGRB2025CT/D  • Planar Epitaxial Construction 20 AMPERES • Nitride Passivation for Stable Blocking Characteristics 250 VOLTS
Order this document SEMICONDUCTOR TECHNICAL DATA by MGRB2025CT/D .ideally suited for high frequency power supplies, free wheeling diodes, and as polarity protection diodes, these state-of-the-art devices have the following features: GALLIUM ARSENIDE RECTIFIER • Planar Epitaxial Construction 20 AMPE
Order this document SEMICONDUCTOR TECHNICAL DATA by MGRB2018CT/D  • Planar Epitaxial Construction RECTIFIER • Nitride Passivation for Stable Blocking Characteristics 20 AMPERES
Order this document SEMICONDUCTOR TECHNICAL DATA by MGRB2018CT/D .ideally suited for high frequency power supplies, free wheeling diodes, and as polarity protection diodes, these state-of-the-art devices have the following features: GALLIUM ARSENIDE • Planar Epitaxial Construction RECTIFIER • Nitri
Order this document SEMICONDUCTOR TECHNICAL DATA by MGRB1018/D  • Planar Epitaxial Construction GALLIUM ARSENIDE • Nitride Passivation for Stable Blocking Characteristics RECTIFIER
Order this document SEMICONDUCTOR TECHNICAL DATA by MGRB1018/D .ideally suited for high frequency power supplies, free wheeling diodes, and as polarity protection diodes, these state-of-the-art devices have the following features: • Planar Epitaxial Construction GALLIUM ARSENIDE • Nitride Passivati
Order this document SEMICONDUCTOR TECHNICAL DATA by MGR2025CT/D  • Planar Epitaxial Construction 20 AMPERES • Nitride Passivation for Stable Blocking Characteristics 250 VOLTS
Order this document SEMICONDUCTOR TECHNICAL DATA by MGR2025CT/D .ideally suited for high frequency power supplies, free wheeling diodes, and as polarity protection diodes, these state-of-the-art devices have the following features: GALLIUM ARSENIDE RECTIFIER • Planar Epitaxial Construction 20 AMPER
Order this document SEMICONDUCTOR TECHNICAL DATA by MGR2018CT/D  • Planar Epitaxial Construction RECTIFIER • Nitride Passivation for Stable Blocking Characteristics 20 AMPERES
Order this document SEMICONDUCTOR TECHNICAL DATA by MGR2018CT/D .ideally suited for high frequency power supplies, free wheeling diodes, and as polarity protection diodes, these state-of-the-art devices have the following features: GALLIUM ARSENIDE • Planar Epitaxial Construction RECTIFIER • Nitrid
Order this document SEMICONDUCTOR TECHNICAL DATA by MGR1018/D  • Planar Epitaxial Construction GALLIUM ARSENIDE • Nitride Passivation for Stable Blocking Characteristics RECTIFIER
Order this document SEMICONDUCTOR TECHNICAL DATA by MGR1018/D .ideally suited for high frequency power supplies, free wheeling diodes, and as polarity protection diodes, these state-of-the-art devices have the following features: • Planar Epitaxial Construction GALLIUM ARSENIDE • Nitride Passivatio
Order this document SEMICONDUCTOR TECHNICAL DATA by MBRV7030CTL/D   D3PAK Power Surface Mount Package
Order this document SEMICONDUCTOR TECHNICAL DATA by MBRV7030CTL/D Motorola Preferred Device D3PAK Power Surface Mount Package SCHOTTKY BARRIER Employing the Schottky Barrier principle in a large area metal–to–silicon power RECTIFIER rectifier. Features epitaxial construction with oxide passivation
Order this document SEMICONDUCTOR TECHNICAL DATA by MBRS340T3/D
Order this document SEMICONDUCTOR TECHNICAL DATA by MBRS340T3/D .employing the Schottky Barrier principle in a large area metal–to–silicon Motorola Preferred Device power diode. State–of–the–art geometry features epitaxial construction with oxide passivation and metal overlay contact. Ideally suited
Order this document SEMICONDUCTOR TECHNICAL DATA by MBRS240LT3/D SMB Power Surface Mount Package
Order this document SEMICONDUCTOR TECHNICAL DATA by MBRS240LT3/D SMB Power Surface Mount Package .employing the Schottky Barrier principle in a metal–to–silicon power SCHOTTKY BARRIER rectifier. Features epitaxial construction with oxide passivation and metal RECTIFIER overlay contact. Ideally suite
Order this document SEMICONDUCTOR TECHNICAL DATA by MBRS2040LT3/D SMB Power Surface Mount Package
Order this document SEMICONDUCTOR TECHNICAL DATA by MBRS2040LT3/D SMB Power Surface Mount Package .employing the Schottky Barrier principle in a metal–to–silicon power SCHOTTKY BARRIER rectifier. Features epitaxial construction with oxide passivation and metal RECTIFIER overlay contact. Ideally suit
Order this document SEMICONDUCTOR TECHNICAL DATA by MBRS1540T3/D SMB Power Surface Mount Package
Order this document SEMICONDUCTOR TECHNICAL DATA by MBRS1540T3/D SMB Power Surface Mount Package .employing the Schottky Barrier principle in a metal–to–silicon power SCHOTTKY BARRIER rectifier. Features epitaxial construction with oxide passivation and metal RECTIFIER overlay contact. Ideally suite
Order this document SEMICONDUCTOR TECHNICAL DATA by MBRS140T3/D
Order this document SEMICONDUCTOR TECHNICAL DATA by MBRS140T3/D .employing the Schottky Barrier principle in a large area metal–to–silicon Motorola Preferred Device power diode. State–of–the–art geometry features epitaxial construction with oxide passivation and metal overlay contact. Ideally suited
Order this document SEMICONDUCTOR TECHNICAL DATA by MBRS140LT3/D SMB Power Surface Mount Package
Order this document SEMICONDUCTOR TECHNICAL DATA by MBRS140LT3/D SMB Power Surface Mount Package .employing the Schottky Barrier principle in a metal–to–silicon power SCHOTTKY BARRIER rectifier. Features epitaxial construction with oxide passivation and metal RECTIFIER overlay contact. Ideally suite
Order this document  Surface Mount Power Package Motorola Preferred Device
Order this document SEMICONDUCTOR TECHNICAL DATA by MBRS130LT3/D Surface Mount Power Package Motorola Preferred Device .Employs the Schottky Barrier principle in a large area metal–to–silicon power diode. State–of–the–art geometry features epitaxial construction with oxide passivation and metal ove
Order this document SEMICONDUCTOR TECHNICAL DATA by MBRS1100T3/D  Surface Mount Power Package
Order this document SEMICONDUCTOR TECHNICAL DATA by MBRS1100T3/D Surface Mount Power Package Motorola Preferred Device Schottky Power Rectifiers employ the use of the Schottky Barrier principle in a large area metal-to-silicon power diode. State-of-the-art geometry features epitaxial construction w
Order this document
Order this document SEMICONDUCTOR TECHNICAL DATA by MBRP60035CTL/D Motorola Preferred Device The SWITCHMODE Power Rectifier uses the Schottky Barrier principle with a platinum barrier metal. This state-of-the-art device has the following features: LOW V • FDual Diode Construction — May Be Parall
Order this document  SWITCHMODE Power Rectifier
Order this document SEMICONDUCTOR TECHNICAL DATA by MBRP40045CTL/D SWITCHMODE Power Rectifier .using the Schottky Barrier principle with a platinum barrier metal. These state–of–the–art devices have the following features: Features: SCHOTTKY BARRIER • Dual Diode Construction — May be Paralleled for
Order this document  SWITCHMODE Power Rectifier
Order this document SEMICONDUCTOR TECHNICAL DATA by MBRP400100CTL/D SWITCHMODE Power Rectifier .using the Schottky Barrier principle with a platinum barrier metal. These state–of–the–art devices have the following features: Features: SCHOTTKY BARRIER • Dual Diode Construction — May be Paralleled fo
Order this document SEMICONDUCTOR TECHNICAL DATA by MBRP30060CT/D   POWERTAP II Package SCHOTTKY BARRIERRECTIFIER
Order this document SEMICONDUCTOR TECHNICAL DATA by MBRP30060CT/D POWERTAP II Package SCHOTTKY BARRIERRECTIFIER .employing the Schottky Barrier principle in a large area metal–to–silicon 300 AMPERES power diode. State of the art geometry features epitaxial construction with oxide 60 VOLTS passivat
Order this document
Order this document SEMICONDUCTOR TECHNICAL DATA by MBRP30045CT/D Motorola Preferred Devices .using the Schottky Barrier principle with a platinum barrier metal. These state–of–the–art devices have the following features: • Dual Diode Construction — May Be Paralleled for Higher Current Output SCHOT
Order this document  POWERTAP III Package
Order this document SEMICONDUCTOR TECHNICAL DATA by MBRP30035L/D POWERTAP III Package .employing the Schottky Barrier principle in a large area metal–to–silicon power diode. State of the art geometry features epitaxial construction with oxide passivation SCHOTTKY BARRIER and metal overlay contact.
Order this document SEMICONDUCTOR TECHNICAL DATA by MBRP20060CT/D   POWERTAP II Package SCHOTTKY BARRIERRECTIFIER
Order this document SEMICONDUCTOR TECHNICAL DATA by MBRP20060CT/D POWERTAP II Package SCHOTTKY BARRIERRECTIFIER .employing the Schottky Barrier principle in a large area metal–to–silicon 200 AMPERES power diode. State of the art geometry features epitaxial construction with oxide 60 VOLTS passivat
Order this document
Order this document SEMICONDUCTOR TECHNICAL DATA by MBRP20045CT/D Motorola Preferred Devices .using the Schottky Barrier principle with a platinum barrier metal. These state–of–the–art devices have the following features: • Dual Diode Construction — May Be Paralleled for Higher Current Output SCHOT
Order this document  POWERTAP III Package
Order this document SEMICONDUCTOR TECHNICAL DATA by MBRP20035L/D POWERTAP III Package .employing the Schottky Barrier principle in a large area metal–to–silicon power diode. State of the art geometry features epitaxial construction with oxide passivation SCHOTTKY BARRIER and metal overlay contact.
Order this document
Order this document SEMICONDUCTOR TECHNICAL DATA by MBRP20030CTL/D Motorola Preferred Device The SWITCHMODE Power Rectifier uses the Schottky Barrier principle with a platinum barrier metal. This state–of–the–art device has the following LOW V features: FSCHOTTKY BARRIER • Dual Diode Constructio
Order this document SEMICONDUCTOR TECHNICAL DATA by MBRM140T3/D POWERMITE Power Surface Mount Package
Order this document SEMICONDUCTOR TECHNICAL DATA by MBRM140T3/D POWERMITE Power Surface Mount Package SCHOTTKY BARRIER The Schottky Powermite employs the Schottky Barrier principle with a barrier metal RECTIFIER and epitaxial construction that produces optimal forward voltage drop–reverse current 1.