Download: Order this document SEMICONDUCTOR TECHNICAL DATA by MMQA5V6T1/D Transient Voltage Suppressor SC-59 QUAD for ESD Protection TRANSIENT VOLTAGE

Order this document SEMICONDUCTOR TECHNICAL DATA by MMQA5V6T1/D Motorola Preferred Devices Transient Voltage Suppressor SC-59 QUAD for ESD Protection TRANSIENT VOLTAGE SUPPRESSOR This quad monolithic silicon voltage suppressor is designed for applications 5.6 VOLTS (4) requiring transient overvoltage protection capability. It is intended for use in 24 WATTS PEAK POWER voltage and ESD sensitive equipment such as computers, printers, business machines, communication systems, medical equipment, and other applica- tions. Its quad junction common anode design protects four separate lines using only...
Author: Abefor Shared: 8/19/19
Downloads: 715 Views: 3882

Content

Order this document SEMICONDUCTOR TECHNICAL DATA by MMQA5V6T1/D

Motorola Preferred Devices

Transient Voltage Suppressor SC-59 QUAD

for ESD Protection TRANSIENT VOLTAGE

SUPPRESSOR

This quad monolithic silicon voltage suppressor is designed for applications 5.6 VOLTS (4) requiring transient overvoltage protection capability. It is intended for use in 24 WATTS PEAK POWER voltage and ESD sensitive equipment such as computers, printers, business machines, communication systems, medical equipment, and other applica- tions. Its quad junction common anode design protects four separate lines using only one package. These devices are ideal for situations where board space is at a premium. 6 5 Specification Features: 1 • SC-59 Package Allows Four Separate Unidirectional Configurations 3 • Peak Power — 24 Watts @ 1.0 ms (Unidirectional), per Figure 7 Waveform CASE 318F-01 • Maximum Clamping Voltage @ Peak Pulse Current STYLE 1 SC-59 PLASTIC • Low Leakage < 2.0 µA • ESD Rating of Class N (exceeding 16 kV) per the Human Body Model Mechanical Characteristics: • Void Free, Transfer-Molded, Thermosetting Plastic Case • Corrosion Resistant Finish, Easily Solderable32• Package Designed for Optimal Automated Board Assembly45• Small Package Size for High Density Applications 6 • Available in 8 mm Tape and Reel Use the Device Number to order the 7 inch/3,000 unit reel. Replace PIN 1. CATHODE with “T3” in the Device Number to order the 13 inch/10,000 unit reel. 2. ANODE 3. CATHODE 4. CATHODE 5. ANODE 6. CATHODE THERMAL CHARACTERISTICS (TA = 25°C unless otherwise noted) Characteristic Symbol Value Unit Peak Power Dissipation @ 1.0 ms (1) Ppk 24 Watts @ TA ≤ 25°C Total Power Dissipation on FR-5 Board (2) @ TA = 25°C °PD° °225 °mW° Derate above 25°C 1.8 mW/°C Thermal Resistance Junction to Ambient RθJA 556 °C/W Total Power Dissipation on Alumina Substrate (3) @ TA = 25°C °PD° °300 °mW Derate above 25°C 2.4 mW/°C Thermal Resistance Junction to Ambient RθJA 417 °C/W Junction and Storage Temperature Range TJ °– 55 to +150° °C Tstg Lead Solder Temperature — Maximum (10 Second Duration) TL 260 °C 1. Non-repetitive current pulse per Figure 7 and derate above TA = 25°C per Figure 8. 2. FR-5 = 1.0 x 0.75 x 0.62 in. 3. Alumina = 0.4 x 0.3 x 0.024 in., 99.5% alumina 4. Other voltages are available Thermal Clad is a trademark of the Bergquist Company Preferred devices are Motorola recommended choices for future use and best overall value. Rev3MMMotQoroAla5, VIn6c.T 119 9M6 MQA20VT1 MOTOROLA,

ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted) UNIDIRECTIONAL (Circuit tied to pins 1, 2, and 5; Pins 2, 3, and 5; Pins 2, 4, and 5; or Pins 2, 5, and 6) (VF = 0.9 V Max @ IF = 10 mA)

Max Reverse Max Reverse Breakdown Voltage Leakage Current Max Zener Impedance (5) Max Voltage @ Maximum Reverse IRSM(4) Temperature V Surge ZT(3) (Clamping Coefficient of (V) @ I ZT IR @ VR Z Current ZT @ IZT Voltage) VZ (mA) (µA) (V) (Ω) (mA) IRSM(4) VRSM (mV/°C) Min Nom Max 1 (A) (V) 5.32 5.6 5.88 1.0 2.0 3.0 400 3.0 8.0 1.26 19 20 21 1.0 0.1 15 125 0.84 28.6 20.07 (3) VZ measured at pulse test current IT at an ambient temperature of 25°C. (4) Surge current waveform per Figure 5 and derate per Figure 6. (5) ZZT is measured by dividing the AC voltage drop across the device by the AC current supplied. The specfied limits are IZ(AC) = 0.1 IZ(DC), with AC frequency = 1 kHz.

Typical Characteristics

8 23 VZ @ IT MMQA20VT1 MMQA5V6T1 22 6 20

UNIDIRECTIONAL

4 17 – 50 0 50 100 150 – 40 0 25 150 TA, AMBIENT TEMPERATURE (°C) TA, AMBIENT TEMPERATURE (°C)

Figure 1. Typical Breakdown Voltage Figure 2. Typical Breakdown Voltage

versus Temperature versus Temperature 10000 70 50 MMQA20VT1 30 UNIDIRECTIONAL 100 0 – 50 0 50 100 1500246810 12 14 16 TA, AMBIENT TEMPERATURE (°C) REVERSE VOLTAGE (V)

Figure 3. Typical Leakage Current Figure 4. Typical Capacitance versus

versus Temperature Reverse Voltage

MOTOROLA MMQA5V6T1 MMQA20VT1

IR, REVERSE LEAKAGE CURRENT (nA) VZ , BREAKDOWN VOLTAGE (VOLTS) C, CAPACITANCE (pF) VZ , BREAKDOWN VOLTAGE (VOLTS),

Typical Characteristics

300 300 250 MMQA5V6T1 250 225 ALUMINA SUBSTRATE 200 UNIDIRECTIONAL 200 150 150 100 100 75 FR-5 BOARD 50 500000.5 1 1.5 2 2.53025 50 75 100 125 150 175 REVERSE VOLTAGE (V) TA, AMBIENT TEMPERATURE (°C)

Figure 5. Typical Capacitance versus Figure 6. Steady State Power Derating Curve Reverse Voltage

PULSE WIDTH (tP) IS DEFINED AS THAT POINT WHERE THE 90 tr PEAK CURRENT DECAYS TO 50% 80 100 PEAK VALUE — IRSM OF IRSM. tr ≤ 10 µs 70

IRSM

HALF VALUE — 50 tP 200001234025 50 75 100 125 150 175 200 t, TIME (ms) TA, AMBIENT TEMPERATURE (°C)

Figure 7. Pulse Waveform Figure 8. Pulse Derating Curve RECTANGULAR

WAVEFORM, TA = 25°C

UNIDIRECTIONAL

1.0 0.1 1.0 10 100 1000 PW, PULSE WIDTH (ms)

Figure 9. Maximum Non-repetitive Surge Power, Ppk versus PW Power is defined as VRSM x IZ(pk) where VRSM

is the clamping voltage at IZ(pk).

MMQA5V6T1 MMQA20VT1 MOTOROLA

VALUE (%) C, CAPACITANCE (pF) Ppk PEAK SURGE POWER (W) PEAK PULSE DERATING IN % OF PEAK POWER OR CURRENT @ TA = 25°C PD , POWER DISSIPATION (mW),

TYPICAL COMMON ANODE APPLICATIONS

A quad junction common anode design in a SC-59 pack- when board space is at a premium. Two simplified examples age protects four separate lines using only one package. of MMQA5V6T1 and MMQA20VT1 applications are illus- This adds flexibility and creativity to PCB design especially trated below. Computer Interface Protection

A

KEYBOARD B TERMINAL FUNCTIONALI/O C PRINTER DECODER ETC. D

GND

MMQA5V6T1 MMQA20VT1 Microprocessor Protection

VDD VGG

ADDRESS BUS RAM ROM DATA BUS

CPU

I/O

CLOCK

CONTROL BUS

GND

MMQA5V6T1 MMQA20VT1 MOTOROLA MMQA5V6T1 MMQA20VT1,

INFORMATION FOR USING THE SC-59 6 LEAD SURFACE MOUNT PACKAGE

MINIMUM RECOMMENDED FOOTPRINT FOR SURFACE MOUNTED APPLICATIONS Surface mount board layout is a critical portion of the total face between the board and the package. With the correct design. The footprint for the semiconductor packages must pad geometry, the packages will self-align when subjected to be the correct size to ensure proper solder connection inter- a solder reflow process. 0.094 2.4 0.037 0.95 0.074 1.9 0.037 0.95 0.028 0.7 0.039 inches 1.0 mm SC-59 6 LEAD SC-59 6 LEAD POWER DISSIPATION The power dissipation of the SC-59 6 Lead is a function of calculate the power dissipation of the device which in this the pad size. This can vary from the minimum pad size for case is 225 milliwatts. soldering to a pad size given for maximum power dissipation. Power dissipation for a surface mount device is determined P = 150°C – 25°CD = 225 milliwatts by TJ(max), the maximum rated junction temperature of the 556°C/W die, RθJA, the thermal resistance from the device junction to The 556°C/W for the SC-59 6 Lead package assumes the ambient, and the operating temperature, TA. Using the use of the recommended footprint on a glass epoxy printed values provided on the data sheet for the SC-59 6 Lead circuit board to achieve a power dissipation of 225 milliwatts. package, PD can be calculated as follows: There are other alternatives to achieving higher power TJ(max) – TA dissipation from the SC-59 6 Lead package. Another alterna- PD = RθJA tive would be to use a ceramic substrate or an aluminum core board such as Thermal Clad. Using a board material The values for the equation are found in the maximum such as Thermal Clad, an aluminum core board, the power ratings table on the data sheet. Substituting these values into dissipation can be doubled using the same footprint. the equation for an ambient temperature TA of 25°C, one can SOLDER STENCIL GUIDELINES Prior to placing surface mount components onto a printed SC-59, SC-59 6 Lead, SC-70/SOT-323, SOD-123, SOT-23, circuit board, solder paste must be applied to the pads. SOT-143, SOT-223, SO-8, SO-14, SO-16, and SMB/SMC Solder stencils are used to screen the optimum amount. diode packages, the stencil opening should be the same as These stencils are typically 0.008 inches thick and may be the pad size or a 1:1 registration. made of brass or stainless steel. For packages such as the SOLDERING PRECAUTIONS The melting temperature of solder is higher than the rated • When preheating and soldering, the temperature of the temperature of the device. When the entire device is heated leads and the case must not exceed the maximum to a high temperature, failure to complete soldering within a temperature ratings as shown on the data sheet. When short time could result in device failure. Therefore, the using infrared heating with the reflow soldering method, following items should always be observed in order to mini- the difference should be a maximum of 10°C. mize the thermal stress to which the devices are subjected. • Always preheat the device. * Soldering a device without preheating can cause excessive • The delta temperature between the preheat and thermal shock and stress which can result in damage to the soldering should be 100°C or less.* device. MMQA5V6T1 MMQA20VT1 MOTOROLA, • The soldering temperature and time should not exceed Gradual cooling should be used since the use of forced 260°C for more than 10 seconds. cooling will increase the temperature gradient and will • When shifting from preheating to soldering, the result in latent failure due to mechanical stress. maximum temperature gradient should be 5°C or less. • Mechanical stress or shock should not be applied during • After soldering has been completed, the device should cooling. be allowed to cool naturally for at least three minutes.

TYPICAL SOLDER HEATING PROFILE

For any given circuit board, there will be a group of control actual temperature that might be experienced on the surface settings that will give the desired heat pattern. The operator of a test board at or near a central solder joint. The two must set temperatures for several heating zones and a figure profiles are based on a high density and a low density board. for belt speed. Taken together, these control settings make The Vitronics SMD310 convection/infrared reflow soldering up a heating “profile” for that particular circuit board. On system was used to generate this profile. The type of solder machines controlled by a computer, the computer remem- used was 62/36/2 Tin Lead Silver with a melting point bers these profiles from one operating session to the next. between 177–189°C. When this type of furnace is used for Figure 8 shows a typical heating profile for use when solder reflow work, the circuit boards and solder joints tend to soldering a surface mount device to a printed circuit board. heat first. The components on the board are then heated by This profile will vary among soldering systems, but it is a conduction. The circuit board, because it has a large surface good starting point. Factors that can affect the profile include area, absorbs the thermal energy more efficiently, then the type of soldering system in use, density and types of distributes this energy to the components. Because of this components on the board, type of solder used, and the type effect, the main body of a component may be up to 30 of board or substrate material being used. This profile shows degrees cooler than the adjacent solder joints. temperature versus time. The line on the graph shows the STEP 1 STEP 2 STEP 3 STEP 4 STEP 5 STEP 6 STEP 7 PREHEAT VENT HEATING HEATING HEATING VENT COOLING ZONE 1 “SOAK” ZONES 2 & 5 ZONES 3 & 6 ZONES 4 & 7 “RAMP” “RAMP” “SOAK” “SPIKE” 205° TO 219°C 170°C PEAK AT200°C DESIRED CURVE FOR HIGH SOLDER JOINT MASS ASSEMBLIES 160°C 150°C 150°C SOLDER IS LIQUID FOR 40 TO 80 SECONDS 100°C 140°C (DEPENDING ON MASS OF ASSEMBLY) 100°C DESIRED CURVE FOR LOW MASS ASSEMBLIES 50°C TIME (3 TO 7 MINUTES TOTAL) TMAX Figure 10. Typical Solder Heating Profile MOTOROLA MMQA5V6T1 MMQA20VT1,

OUTLINE DIMENSIONS A NOTES:

1. DIMENSIONING AND TOLERANCING PER ANSI

L Y14.5M, 1982.

2. CONTROLLING DIMENSION: INCH. 3. MAXIMUM LEAD THICKNESS INCLUDES LEAD FINISH THICKNESS. MINIMUM LEAD THICKNESS654IS THE MINIMUM THICKNESS OF BASE

S B MATERIAL.

123INCHES MILLIMETERS DIM MIN MAX MIN MAX A 0.1063 0.1220 2.70 3.10

D B 0.0512 0.0669 1.30 1.70 G C 0.0394 0.0511 1.00 1.30D 0.0138 0.0196 0.35 0.50

G 0.0335 0.0413 0.85 1.05 H 0.0005 0.0040 0.013 0.100

M J 0.0040 0.0102 0.10 0.26 J K 0.0079 0.0236 0.20 0.60

0.05 (0.002) C L 0.0493 0.0649 1.25 1.65M010 0 10

K S 0.0985 0.1181 2.50 3.00H

STYLE 1: PIN 1. CATHODE 2. ANODE 3. CATHODE 4. CATHODE

CASE 318F-01 5. ANODE

6. CATHODE

ISSUE A SC-59 6 LEAD MMQA5V6T1 MMQA20VT1 MOTOROLA

, Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters can and do vary in different applications. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. How to reach us: USA / EUROPE: Motorola Literature Distribution; JAPAN: Nippon Motorola Ltd.; Tatsumi–SPD–JLDC, Toshikatsu Otsuki, P.O. Box 20912; Phoenix, Arizona 85036. 1–800–441–2447 6F Seibu–Butsuryu–Center, 3–14–2 Tatsumi Koto–Ku, Tokyo 135, Japan. 03–3521–8315 MFAX: email is hidden – TOUCHTONE (602) 244–6609 HONG KONG: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park, INTERNET: http://Design–NET.com 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852–26629298 ◊ MMQA5V6T1/D

MOTOROLA MMQA 5V6T1 MMQA20V8 T1

]
15

Similar documents

Order this document
Order this document SEMICONDUCTOR TECHNICAL DATA by MMBZ5V6ALT1/D "% & "!"% " "! !" !#$ Transient Voltage Suppressors Motorola Preferred Devices for ESD Protection These dual monolithic silicon zener diodes are designed for applications SOT–23 COMMON ANODE DUAL requiring transient overvoltage protec
SEMICONDUCTOR GENERAL 500 mW DO-35 Glass DATA Zener Voltage Regulator Diodes 500 Milliwatt Hermetically Sealed GLASS ZENER DIODES500 MILLIWATTS Glass Silicon Zener Diodes 1.8–200 VOLTS
MOTOROLA SEMICONDUCTOR TECHNICAL DATA GENERAL 500 mW DO-35 Glass DATA Zener Voltage Regulator Diodes GENERAL DATA APPLICABLE TO ALL SERIES IN 500 mW THIS GROUP DO-35 GLASS 500 Milliwatt Hermetically Sealed GLASS ZENER DIODES500 MILLIWATTS Glass Silicon Zener Diodes 1.8–200 VOLTS Specification Featur
MOTOROLA SEMICONDUCTOR TECHNICAL DATA GENERAL 1 to 3 Watt DO-41 Surmetic 30 DATA Zener Voltage Regulator Diodes GENERAL DATA APPLICABLE TO ALL SERIES IN 1–3 WATT
MOTOROLA SEMICONDUCTOR TECHNICAL DATA GENERAL 1 to 3 Watt DO-41 Surmetic 30 DATA Zener Voltage Regulator Diodes GENERAL DATA APPLICABLE TO ALL SERIES IN 1–3 WATT THIS GROUP DO-41 1 to 3 Watt Surmetic 30 SURMETIC 30 Silicon Zener Diodes 1 TO 3 WATT .a complete series of 1 to 3 Watt Zener Diodes with
MOTOROLA SEMICONDUCTOR TECHNICAL DATA GENERAL 1–1.3 Watt DO-41 Glass DATA Zener Voltage Regulator Diodes GENERAL DATA APPLICABLE TO ALL SERIES IN 1–1.3 WATT
MOTOROLA SEMICONDUCTOR TECHNICAL DATA GENERAL 1–1.3 Watt DO-41 Glass DATA Zener Voltage Regulator Diodes GENERAL DATA APPLICABLE TO ALL SERIES IN 1–1.3 WATT THIS GROUP DO-41 GLASS One Watt Hermetically Sealed Glass Silicon Zener Diodes 1 WATTZENER REGULATOR DIODES Specification Features: 3.3–100 VOL
MOTOROLA SEMICONDUCTOR TECHNICAL DATA
MOTOROLA SEMICONDUCTOR TECHNICAL DATA Field-effect current regulator diodes are circuit elements that provide a current essentially independent of voltage. These diodes are especially designed for maximum impedance over the operating range. These devices may be used in parallel to obtain higher curr
TRANSIENT VOLTAGE SUPPRESSORS General Instruments CROSS REFERENCE OPTOELECTRONIC AND SIGNAL PRODUCTS DIVISION
CR103/D REV 1 TRANSIENT VOLTAGE SUPPRESSORS General Instruments CROSS REFERENCE OPTOELECTRONIC AND SIGNAL PRODUCTS DIVISION Transient Voltage Suppressors General Instruments CROSS REFERENCE GI Part Description: 1.5KA series GI Part Description: 1.5KE series (continued) GI Part Description: 1N6267A s
SEMICONDUCTOR 3 Watt Plastic Surface Mount 1SMB5913BT3 Silicon Zener Diodes through 1SMB5956BT3
MOTOROLA SEMICONDUCTOR TECHNICAL DATA 3 Watt Plastic Surface Mount 1SMB5913BT3 Silicon Zener Diodes through 1SMB5956BT3 This complete new line of 3 Watt Zener Diodes offers the following advantages. Specification Features: • A Complete Voltage Range — 3.3 to 200 Volts • Flat Handling Surface for Acc
Order this document SEMICONDUCTOR TECHNICAL DATA by 1SMA5913BT3/D !
Order this document SEMICONDUCTOR TECHNICAL DATA by 1SMA5913BT3/D !" !! ! " "! This complete new line of 1.5 Watt Zener Diodes offers the following PLASTIC SURFACE advantages. MOUNT ZENER DIODES Specification Features: 1.5 WATTS • Voltage Range – 3.3 to 68 V 3.3–68 VOLTS • ESD Rating of Class 3 (>1
Order this document SEMICONDUCTOR TECHNICAL DATA by 1SMA5.0AT3/D
Order this document SEMICONDUCTOR TECHNICAL DATA by 1SMA5.0AT3/D Specification Features: • Reverse Stand–Off Voltage Range: 5.0–78 V • Peak Power — 400 Watts @ 1.0 ms PLASTIC SURFACE MOUNT • ESD Rating of Class 3 (>16 kV) per Human Body Model ZENER OVERVOLTAGE • Pico Seconds Response Time (0 V to BV
Order this document SEMICONDUCTOR TECHNICAL DATA by 1SMA10CAT3/D
Order this document SEMICONDUCTOR TECHNICAL DATA by 1SMA10CAT3/D Specification Features: • Reverse Stand–Off Voltage Range: 10–78 V • Bidirectional Operation PLASTIC SURFACE MOUNT • Peak Power — 400 Watts @ 1.0 ms BIDIRECTIONAL ZENER OVERVOLTAGE • ESD Rating of Class 3 (>16 kV) per Human Body Model
Order this document SEMICONDUCTOR TECHNICAL DATA by 1PMT5913BT3/D %#
Order this document SEMICONDUCTOR TECHNICAL DATA by 1PMT5913BT3/D %#"& %% $% &# "&!% "! !# "$ "'# % This complete new line of zener/tvs diodes offers a 2.5 watt series in a micro PLASTIC SURFACE MOUNT miniature, space saving surface mount package. The Powermite zener/tvs ZENER DIODES diodes are desi
SEMICONDUCTOR 5 Watt Surmetic 40 1N5333B Silicon Zener Diodes through 1N5388B
MOTOROLA SEMICONDUCTOR TECHNICAL DATA 5 Watt Surmetic 40 1N5333B Silicon Zener Diodes through 1N5388B This is a complete series of 5 Watt Zener Diodes with tight limits and better operating characteristics that reflect the superior capabilities of silicon-oxide-passivated junctions. All this is in a
MOTOROLA SEMICONDUCTOR TECHNICAL DATA
MOTOROLA SEMICONDUCTOR TECHNICAL DATA Field-effect current regulator diodes are circuit elements that provide a current essentially independent of voltage. These diodes are especially designed for maximum impedance over the operating range. These devices may be used in parallel to obtain higher curr
Order this document  POWERTAP II Package
Order this document SEMICONDUCTOR TECHNICAL DATA by XBRP40045CTL/D POWERTAP II Package .employing the Schottky Barrier principle in a large area metal–to–silicon SCHOTTKY BARRIER power diode. State–of–the–art geometry features epitaxial construction with RECTIFIER oxide passivation and metal overla
Order this document  POWERTAP II Package
Order this document SEMICONDUCTOR TECHNICAL DATA by XBRP400100CTL/D POWERTAP II Package .employing the Schottky Barrier principle in a large area metal–to–silicon SCHOTTKY BARRIER power diode. State–of–the–art geometry features epitaxial construction with RECTIFIER oxide passivation and metal overl
Features Package Applications
SEMICONDUCTORRURU50120 April 1995 50A, 1200V Ultrafast Diode Features Package • Ultrafast with Soft Recovery .< 125ns SINGLE LEAD JEDEC STYLE TO-218 • Operating Temperature ..+175oC ANODE • Reverse Voltage .1200V CATHODE • Avalanche Energy Rated (FLANGE) • Planar Construction Applications • Switchin
Advanced Power MOSFET IRFP250A FEATURES BVDSS = 200 V RDS(on) = 0.085 Ω Rugged Gate Oxide Technology Absolute Maximum Ratings
Advanced Power MOSFET IRFP250A FEATURES BVDSS = 200 V Avalanche Rugged Technology RDS(on) = 0.085 Ω Rugged Gate Oxide Technology Lower Input Capacitance ID = 32 A Improved Gate Charge Extended Safe Operating Area Lower Leakage Current : 10µA(Max.) @ VDS = 200V TO-3P Low RDS(ON) : 0.071 Ω (Typ.) 1.Ga
Advanced Power MOSFET IRF640A FEATURES BVDSS = 200VR= 0.18 Ω
Advanced Power MOSFET IRF640A FEATURES BVDSS = 200 V Avalanche Rugged Technology R = 0.18 Ω Rugged Gate Oxide Technology DS(on) Lower Input Capacitance ID = 18 A Improved Gate Charge Extended Safe Operating Area Lower Leakage Current : 10 µA (Max.) @ VDS = 200V TO-220 Lower RDS(ON) : 0.144 Ω(Typ.) 1
Electrical Characteristics @ TJ = 25°C (unless otherwise specified)
PD-91277A IRFZ46N HEXFET® Power MOSFET Advanced Process Technology D Ultra Low On-Resistance VDSS = 55V Dynamic dv/dt Rating 175°C Operating Temperature RDS(on) = 16.5mΩ Fast Switching G Fully Avalanche Rated ID = 53A S Description Advanced HEXFET® Power MOSFETs from International Rectifier utilize
Electrical Characteristics TC = 25°C unless otherwise noted
October 2001 IRF630B/IRFS630B 200V N-Channel MOSFET General Description Features These N-Channel enhancement mode power field effect • 9.0A, 200V, RDS(on) = 0.4Ω @VGS = 10 V transistors are produced using Fairchild’s proprietary, • Low gate charge ( typical 22 nC) planar, DMOS technology. • Low Crss
PRELIMINARY IRG4PC30KD INSULATED GATE BIPOLAR TRANSISTOR WITH Short Circuit Rated ULTRAFAST SOFT RECOVERY DIODE UltraFast IGBT Features C Benefits
PD -9.1587 PRELIMINARY IRG4PC30KD INSULATED GATE BIPOLAR TRANSISTOR WITH Short Circuit Rated ULTRAFAST SOFT RECOVERY DIODE UltraFast IGBT Features C • High short circuit rating optimized for motor control, VCES = 600V tsc =10µs, @360V VCE (start), TJ = 125°C, VGE = 15V • Combines low conduction loss
PRELIMINARY IRG4PC40KD INSULATED GATE BIPOLAR TRANSISTOR WITH Short Circuit Rated ULTRAFAST SOFT RECOVERY DIODE UltraFast IGBT Features C E
PD -9.1584 PRELIMINARY IRG4PC40KD INSULATED GATE BIPOLAR TRANSISTOR WITH Short Circuit Rated ULTRAFAST SOFT RECOVERY DIODE UltraFast IGBT Features C • Short Circuit Rated UltraFast: Optimized for VCES = 600V high operating frequencies >5.0 kHz , and Short Circuit Rated to 10µs @ 125°C, VGE = 15V • G
IRGBC40F
PD - 9.691A IRGBC40F INSULATED GATE BIPOLAR TRANSISTOR Fast Speed IGBT Features C • Switching-loss rating includes all "tail" losses • Optimized for medium operating frequency ( 1 to VCES = 600V 10kHz) See Fig. 1 for Current vs. Frequency curve VCE(sat) ≤ 2.0V G @VGE = 15V, IC = 27A E n-channel Desc
HEXFET® Power MOSFET Description
HEXFET® Power MOSFET Advanced Process Technology D Ultra Low On-Resistance VDSS = 40V Dynamic dv/dt Rating 175°C Operating Temperature RDS(on) = 4.0mΩ Fast Switching G Fully Avalanche Rated ID = 160A S Description Seventh Generation HEXFET® power MOSFETs from International Rectifier utilize advanced
IRGPF30F
PD - 9.1026 IRGPF30F INSULATED GATE BIPOLAR TRANSISTOR Fast Speed IGBT Features C • Switching-loss rating includes all "tail" losses • Optimized for medium operating frequency (1 to VCES = 900V 10kHz) See Fig. 1 for Current vs. Frequency curve VCE(sat) ≤ 3.7V G @VGE = 15V, IC = 11A E n-channel Descr
DISCRETE SEMICONDUCTORS DATA SHEET J108; J109; J110 N-channel silicon junction FETs Product specification 1996 Jul 30 Supersedes data of April 1995 File under Discrete Semiconductors, SC07
DISCRETE SEMICONDUCTORS DATA SHEET J108; J109; J110 N-channel silicon junction FETs Product specification 1996 Jul 30 Supersedes data of April 1995 File under Discrete Semiconductors, SC07 FEATURES PINNING - TO-92 • High speed switching PIN SYMBOL DESCRIPTION • Interchangeability of drain and source
DISCRETE SEMICONDUCTORS DATA SHEET Line-ups RF Power Transistors for UHF 1996 Feb 12 File under Discrete Semiconductors, SC08b
DISCRETE SEMICONDUCTORS DATA SHEET Line-ups RF Power Transistors for UHF 1996 Feb 12 File under Discrete Semiconductors, SC08b INTRODUCTION In this section, we present information on recommended circuit line-ups in the main RF power application areas. A comprehensive range of output power levels is
Typical Characteristics
KSP94 High Voltage Transistor • High Collector-Emitter Voltage: VCEO= -400V • Low Collector-Emitter Saturation Voltage • Complement to KSP44 1 TO-92 1. Emitter 2. Base 3. Collector PNP Epitaxial Silicon Transistor Absolute Maximum Ratings Ta=25°C unless otherwise noted Symbol Parameter Value Units V
DISCRETE SEMICONDUCTORS DATA SHEET J308; J309; J310 N-channel silicon field-effect transistors Product specification 1996 Jul 30 Supersedes data of April 1995
DISCRETE SEMICONDUCTORS DATA SHEET J308; J309; J310 N-channel silicon field-effect transistors Product specification 1996 Jul 30 Supersedes data of April 1995 File under Discrete Semiconductors, SC07 FEATURES PINNING - TO-92 • Low noise PIN SYMBOL DESCRIPTION • Interchangeability of drain and source
Order this document SEMICONDUCTOR TECHNICAL DATA by MAC223/D Silicon Bidirectional Triode Thyristors
Order this document SEMICONDUCTOR TECHNICAL DATA by MAC223/D Silicon Bidirectional Triode Thyristors .designed primarily for full-wave ac control applications such as lighting sysjtems, heater controls, motor controls and power supplies; or wherever full-wave silicon- gate-controlled devices are nee