Download: SEMICONDUCTOR 3 Watt Plastic Surface Mount 1SMB5913BT3 Silicon Zener Diodes through 1SMB5956BT3

MOTOROLA SEMICONDUCTOR TECHNICAL DATA 3 Watt Plastic Surface Mount 1SMB5913BT3 Silicon Zener Diodes through 1SMB5956BT3 This complete new line of 3 Watt Zener Diodes offers the following advantages. Specification Features: • A Complete Voltage Range — 3.3 to 200 Volts • Flat Handling Surface for Accurate Placement PLASTIC SURFACE MOUNT • Package Design for Top Side or Bottom Circuit Board Mounting ZENER DIODES • Available in Tape and Reel 3 WATTS 3.3–200 VOLTS Mechanical Characteristics: CASE: Void-free, transfer-molded plastic MAXIMUM CASE TEMPERATURE FOR SOLDERING PURPOSES: 260°C for 10 seco...
Author: Louie Harvey Shared: 8/19/19
Downloads: 275 Views: 981

Content

MOTOROLA SEMICONDUCTOR TECHNICAL DATA

3 Watt Plastic Surface Mount 1SMB5913BT3

Silicon Zener Diodes through

1SMB5956BT3 This complete new line of 3 Watt Zener Diodes offers the following advantages. Specification Features: • A Complete Voltage Range — 3.3 to 200 Volts • Flat Handling Surface for Accurate Placement PLASTIC SURFACE MOUNT • Package Design for Top Side or Bottom Circuit Board Mounting ZENER DIODES • Available in Tape and Reel 3 WATTS 3.3–200 VOLTS Mechanical Characteristics: CASE: Void-free, transfer-molded plastic MAXIMUM CASE TEMPERATURE FOR SOLDERING PURPOSES: 260°C for 10 seconds FINISH: All external surfaces are corrosion resistant with readily solderable leads POLARITY: Cathode indicated by molded polarity notch. When operated in zener mode, cathode will be positive with respect to anode. MOUNTING POSITION: Any WEIGHT: Modified L-Bend providing more contact area to bond pad WAFER FAB LOCATION: Phoenix, Arizona ASSEMBLY/TEST LOCATION: Seremban, Malaysia CASE 403A

PLASTIC

MAXIMUM RATINGS Rating Symbol Value Unit DC Power Dissipation @ TL = 75°C, Measured at Zero Lead Length PD 3 Watts Derate above 75°C 40 mW/°C DC Power Dissipation @ TA = 25°C* PD 830 mW Derate above 25°C 6.6 mW/°C Operating and Storage Junction Temperature Range TJ, Tstg – 65 to +150 °C *FR4 Board, within 1″ to device, using Motorola minimum recommended footprint, as shown in case 403A outline dimensions spec. ELECTRICAL CHARACTERISTICS (TL = 30°C unless otherwise noted.) (VF = 1.5 Volts Max @ IF = 200 mAdc for all types.) Nominal Max Reverse Maximum DC Zener Voltage Test Max Zener Impedance (Note 2) Leakage Current Zener VZ @ IZT Current Current Volts IZT ZZT @ IZT ZZK @ IZK IR @ VR IZM Device Device* (Note 1) mA Ohms Ohms mA µA Volts mAdc Marking 1SMB5913BT3 3.3 113.6 10 500 1 100 1 454 913B 1SMB5914BT3 3.6 104.2 9 500 1 75 1 416 914B 1SMB5915BT3 3.9 96.1 7.5 500 1 25 1 384 915B 1SMB5916BT3 4.3 87.2 6 500151348 916B 1SMB5917BT3 4.7 79.8 5 500151.5 319 917B 1SMB5918BT3 5.1 73.5 4 350152294 918B 1SMB5919BT3 5.6 66.9 2 250153267 919B 1SMB5920BT3 6.2 60.5 2 200154241 920B 1SMB5921BT3 6.8 55.1 2.5 200155.2 220 921B 1SMB5922BT3 7.5 50 3 400 0.5 5 6.8 200 922B 1SMB5923BT3 8.2 45.7 3.5 400 0.5 5 6.5 182 923B 1SMB5924BT3 9.1 41.2 4 500 0.557164 924B 1SMB5925BT3 10 37.5 4.5 500 0.2558150 925B 1SMB5926BT3 11 34.1 5.5 550 0.25 1 8.4 136 926B 1SMB5927BT3 12 31.2 6.5 550 0.25 1 9.1 125 927B 1SMB5928BT3 13 28.8 7 550 0.25 1 9.9 115 928B (continued) *TOLERANCE AND VOLTAGE DESIGNATION Tolerance designation — The type numbers listed indicate a tolerance of ±5%. 7-1, ELECTRICAL CHARACTERISTICS — continued (TL = 30°C unless otherwise noted.) (VF = 1.5 Volts Max @ IF = 200 mAdc for all types.) Nominal Max Reverse Maximum DC Zener Voltage Test Max Zener Impedance (Note 2) Leakage Current Zener VZ @ IZT Current Current Volts IZT ZZT @ IZT ZZK @ IZK IR @ VR IZM Device Device* (Note 1) mA Ohms Ohms mA µA Volts mAdc Marking 1SMB5929BT3 15 25 9 600 0.25 1 11.4 100 929B 1SMB5930BT3 16 23.4 10 600 0.25 1 12.2 93 930B 1SMB5931BT3 18 20.8 12 650 0.25 1 13.7 83 931B 1SMB5932BT3 20 18.7 14 650 0.25 1 15.2 75 932B 1SMB5933BT3 22 17 17.5 650 0.25 1 16.7 68 933B 1SMB5934BT3 24 15.6 19 700 0.25 1 18.2 62 934B 1SMB5935BT3 27 13.9 23 700 0.25 1 20.6 55 935B 1SMB5936BT3 30 12.5 26 750 0.25 1 22.8 50 936B 1SMB5937BT3 33 11.4 33 800 0.25 1 25.1 45 937B 1SMB5938BT3 36 10.4 38 850 0.25 1 27.4 41 938B 1SMB5939BT3 39 9.6 45 900 0.25 1 29.7 38 939B 1SMB5940BT3 43 8.7 53 950 0.25 1 32.7 34 940B 1SMB5941BT3 47 8 67 1000 0.25 1 35.8 31 941B 1SMB5942BT3 51 7.3 70 1100 0.25 1 38.8 29 942B 1SMB5943BT3 56 6.7 86 1300 0.25 1 42.6 26 943B 1SMB5944BT3 62 6 100 1500 0.25 1 47.1 24 944B 1SMB5945BT3 68 5.5 120 1700 0.25 1 51.7 22 945B 1SMB5946BT3 75 5 140 2000 0.25 1 56 20 946B 1SMB5947BT3 82 4.6 160 2500 0.25 1 62.2 18 947B 1SMB5948BT3 91 4.1 200 3000 0.25 1 69.2 16 948B 1SMB5949BT3 100 3.7 250 3100 0.25 1 76 15 949B 1SMB5950BT3 110 3.4 300 4000 0.25 1 83.6 13 950B 1SMB5951BT3 120 3.1 380 4500 0.25 1 91.2 12 951B 1SMB5952BT3 130 2.9 450 5000 0.25 1 98.8 11 952B 1SMB5953BT3 150 2.5 600 6000 0.25 1 114 10 953B 1SMB5954BT3 160 2.3 700 6500 0.25 1 121.6 9 954B 1SMB5955BT3 180 2.1 900 7000 0.25 1 136.8 8 955B 1SMB5956BT3 200 1.9 1200 8000 0.25 1 152 7 956B *TOLERANCE AND VOLTAGE DESIGNATION Tolerance designation — The type numbers listed indicate a tolerance of ±5%. 7-2, 1K

RECTANGULAR

5 500 NONREPETITIVE

WAVEFORM

4 TJ = 25°C PRIOR 200 TO INITIAL PULSE

T

3 L 100 2 50 TA 20 0 10 0 25 50 75 100 125 150 0.1 0.2 0.3 0.5123510 20 30 50 100 T, TEMPERATURE (°C) PW, PULSE WIDTH (ms)

Figure 1. Steady State Power Derating Figure 2. Maximum Surge Power

10 100 8 VZ @ IZT 3045220.5 –2 0.3 0.2 –4 0.1246810 12012345678910 VZ, ZENER VOLTAGE (VOLTS) VZ, ZENER VOLTAGE (VOLTS)

Figure 3. Zener Voltage — To 12 Volts Figure 4. VZ = 3.3 thru 10 Volts

100 200 I = 1mA 50 Z(dc) 30 100 20 70 10 50 5 30 3 20 10mA 1 10 0.5 0.3 0.2 3 20mA iZ(rms) = 0.1 IZ(dc) 0.12010 20 30 40 50 60 70 80 90 1005710 20 30 50 70 100 VZ, ZENER VOLTAGE (VOLTS) VZ, ZENER VOLTAGE (VOLTS)

Figure 5. VZ = 12 thru 82 Volts Figure 6. Effect of Zener Voltage

7-3IZ, ZENER CURRENT (mA) θVZ , TEMPERATURE COEFFICIENT (mV/ ° C) P D , MAXIMUM POWER DISSIPATION (WATTS) Z Z , DYNAMIC IMPEDANCE (OHMS) I Z , ZENER CURRENT (mA) PP K , PEAK SURGE POWER (WATTS), 200 1k 500 TJ = 25°C V @ I iZ(rms) = 0.1 IZ ZT Z(dc) 100 200 VZ =150V 70 100 91V 50 50 62V 30 10 20 5 22V 2 12V 1 6.8V10 10 20 30 50 70 100 200 0.512510 20 50 100 200 500 VZ, ZENER VOLTAGE (VOLTS) IZ, ZENER TEST CURRENT (mA)

Figure 7. Zener Voltage — 14 To 200 Volts Figure 8. Effect of Zener Current

NOTE 1. ZENER VOLTAGE (VZ) MEASUREMENT NOTE 2. ZENER IMPEDANCE (ZZ) DERIVATION Nominal zener voltage is measured with the device junction in thermal equilibrium with ambi- ZZT and ZZK are measured by dividing the ac voltage drop across the device by the ac current ent temperature at 25°C. applied. The specified limits are for IZ(ac) = 0.1 IZ(dc) with the ac frequency = 60 Hz. 7-4 θVZ , TEMPERATURE COEFFICIENT (mV/ ° C) Z Z , DYNAMIC IMPEDANCE (OHMS)]
15

Similar documents

Order this document SEMICONDUCTOR TECHNICAL DATA by 1SMA5913BT3/D !
Order this document SEMICONDUCTOR TECHNICAL DATA by 1SMA5913BT3/D !" !! ! " "! This complete new line of 1.5 Watt Zener Diodes offers the following PLASTIC SURFACE advantages. MOUNT ZENER DIODES Specification Features: 1.5 WATTS • Voltage Range – 3.3 to 68 V 3.3–68 VOLTS • ESD Rating of Class 3 (>1
Order this document SEMICONDUCTOR TECHNICAL DATA by 1SMA5.0AT3/D
Order this document SEMICONDUCTOR TECHNICAL DATA by 1SMA5.0AT3/D Specification Features: • Reverse Stand–Off Voltage Range: 5.0–78 V • Peak Power — 400 Watts @ 1.0 ms PLASTIC SURFACE MOUNT • ESD Rating of Class 3 (>16 kV) per Human Body Model ZENER OVERVOLTAGE • Pico Seconds Response Time (0 V to BV
Order this document SEMICONDUCTOR TECHNICAL DATA by 1SMA10CAT3/D
Order this document SEMICONDUCTOR TECHNICAL DATA by 1SMA10CAT3/D Specification Features: • Reverse Stand–Off Voltage Range: 10–78 V • Bidirectional Operation PLASTIC SURFACE MOUNT • Peak Power — 400 Watts @ 1.0 ms BIDIRECTIONAL ZENER OVERVOLTAGE • ESD Rating of Class 3 (>16 kV) per Human Body Model
Order this document SEMICONDUCTOR TECHNICAL DATA by 1PMT5913BT3/D %#
Order this document SEMICONDUCTOR TECHNICAL DATA by 1PMT5913BT3/D %#"& %% $% &# "&!% "! !# "$ "'# % This complete new line of zener/tvs diodes offers a 2.5 watt series in a micro PLASTIC SURFACE MOUNT miniature, space saving surface mount package. The Powermite zener/tvs ZENER DIODES diodes are desi
SEMICONDUCTOR 5 Watt Surmetic 40 1N5333B Silicon Zener Diodes through 1N5388B
MOTOROLA SEMICONDUCTOR TECHNICAL DATA 5 Watt Surmetic 40 1N5333B Silicon Zener Diodes through 1N5388B This is a complete series of 5 Watt Zener Diodes with tight limits and better operating characteristics that reflect the superior capabilities of silicon-oxide-passivated junctions. All this is in a
MOTOROLA SEMICONDUCTOR TECHNICAL DATA
MOTOROLA SEMICONDUCTOR TECHNICAL DATA Field-effect current regulator diodes are circuit elements that provide a current essentially independent of voltage. These diodes are especially designed for maximum impedance over the operating range. These devices may be used in parallel to obtain higher curr
Order this document  POWERTAP II Package
Order this document SEMICONDUCTOR TECHNICAL DATA by XBRP40045CTL/D POWERTAP II Package .employing the Schottky Barrier principle in a large area metal–to–silicon SCHOTTKY BARRIER power diode. State–of–the–art geometry features epitaxial construction with RECTIFIER oxide passivation and metal overla
Order this document  POWERTAP II Package
Order this document SEMICONDUCTOR TECHNICAL DATA by XBRP400100CTL/D POWERTAP II Package .employing the Schottky Barrier principle in a large area metal–to–silicon SCHOTTKY BARRIER power diode. State–of–the–art geometry features epitaxial construction with RECTIFIER oxide passivation and metal overl
Features Package Applications
SEMICONDUCTORRURU50120 April 1995 50A, 1200V Ultrafast Diode Features Package • Ultrafast with Soft Recovery .< 125ns SINGLE LEAD JEDEC STYLE TO-218 • Operating Temperature ..+175oC ANODE • Reverse Voltage .1200V CATHODE • Avalanche Energy Rated (FLANGE) • Planar Construction Applications • Switchin
Advanced Power MOSFET IRFP250A FEATURES BVDSS = 200 V RDS(on) = 0.085 Ω Rugged Gate Oxide Technology Absolute Maximum Ratings
Advanced Power MOSFET IRFP250A FEATURES BVDSS = 200 V Avalanche Rugged Technology RDS(on) = 0.085 Ω Rugged Gate Oxide Technology Lower Input Capacitance ID = 32 A Improved Gate Charge Extended Safe Operating Area Lower Leakage Current : 10µA(Max.) @ VDS = 200V TO-3P Low RDS(ON) : 0.071 Ω (Typ.) 1.Ga
Advanced Power MOSFET IRF640A FEATURES BVDSS = 200VR= 0.18 Ω
Advanced Power MOSFET IRF640A FEATURES BVDSS = 200 V Avalanche Rugged Technology R = 0.18 Ω Rugged Gate Oxide Technology DS(on) Lower Input Capacitance ID = 18 A Improved Gate Charge Extended Safe Operating Area Lower Leakage Current : 10 µA (Max.) @ VDS = 200V TO-220 Lower RDS(ON) : 0.144 Ω(Typ.) 1
Electrical Characteristics @ TJ = 25°C (unless otherwise specified)
PD-91277A IRFZ46N HEXFET® Power MOSFET Advanced Process Technology D Ultra Low On-Resistance VDSS = 55V Dynamic dv/dt Rating 175°C Operating Temperature RDS(on) = 16.5mΩ Fast Switching G Fully Avalanche Rated ID = 53A S Description Advanced HEXFET® Power MOSFETs from International Rectifier utilize
Electrical Characteristics TC = 25°C unless otherwise noted
October 2001 IRF630B/IRFS630B 200V N-Channel MOSFET General Description Features These N-Channel enhancement mode power field effect • 9.0A, 200V, RDS(on) = 0.4Ω @VGS = 10 V transistors are produced using Fairchild’s proprietary, • Low gate charge ( typical 22 nC) planar, DMOS technology. • Low Crss
PRELIMINARY IRG4PC30KD INSULATED GATE BIPOLAR TRANSISTOR WITH Short Circuit Rated ULTRAFAST SOFT RECOVERY DIODE UltraFast IGBT Features C Benefits
PD -9.1587 PRELIMINARY IRG4PC30KD INSULATED GATE BIPOLAR TRANSISTOR WITH Short Circuit Rated ULTRAFAST SOFT RECOVERY DIODE UltraFast IGBT Features C • High short circuit rating optimized for motor control, VCES = 600V tsc =10µs, @360V VCE (start), TJ = 125°C, VGE = 15V • Combines low conduction loss
PRELIMINARY IRG4PC40KD INSULATED GATE BIPOLAR TRANSISTOR WITH Short Circuit Rated ULTRAFAST SOFT RECOVERY DIODE UltraFast IGBT Features C E
PD -9.1584 PRELIMINARY IRG4PC40KD INSULATED GATE BIPOLAR TRANSISTOR WITH Short Circuit Rated ULTRAFAST SOFT RECOVERY DIODE UltraFast IGBT Features C • Short Circuit Rated UltraFast: Optimized for VCES = 600V high operating frequencies >5.0 kHz , and Short Circuit Rated to 10µs @ 125°C, VGE = 15V • G
IRGBC40F
PD - 9.691A IRGBC40F INSULATED GATE BIPOLAR TRANSISTOR Fast Speed IGBT Features C • Switching-loss rating includes all "tail" losses • Optimized for medium operating frequency ( 1 to VCES = 600V 10kHz) See Fig. 1 for Current vs. Frequency curve VCE(sat) ≤ 2.0V G @VGE = 15V, IC = 27A E n-channel Desc
HEXFET® Power MOSFET Description
HEXFET® Power MOSFET Advanced Process Technology D Ultra Low On-Resistance VDSS = 40V Dynamic dv/dt Rating 175°C Operating Temperature RDS(on) = 4.0mΩ Fast Switching G Fully Avalanche Rated ID = 160A S Description Seventh Generation HEXFET® power MOSFETs from International Rectifier utilize advanced
IRGPF30F
PD - 9.1026 IRGPF30F INSULATED GATE BIPOLAR TRANSISTOR Fast Speed IGBT Features C • Switching-loss rating includes all "tail" losses • Optimized for medium operating frequency (1 to VCES = 900V 10kHz) See Fig. 1 for Current vs. Frequency curve VCE(sat) ≤ 3.7V G @VGE = 15V, IC = 11A E n-channel Descr
DISCRETE SEMICONDUCTORS DATA SHEET J108; J109; J110 N-channel silicon junction FETs Product specification 1996 Jul 30 Supersedes data of April 1995 File under Discrete Semiconductors, SC07
DISCRETE SEMICONDUCTORS DATA SHEET J108; J109; J110 N-channel silicon junction FETs Product specification 1996 Jul 30 Supersedes data of April 1995 File under Discrete Semiconductors, SC07 FEATURES PINNING - TO-92 • High speed switching PIN SYMBOL DESCRIPTION • Interchangeability of drain and source
DISCRETE SEMICONDUCTORS DATA SHEET Line-ups RF Power Transistors for UHF 1996 Feb 12 File under Discrete Semiconductors, SC08b
DISCRETE SEMICONDUCTORS DATA SHEET Line-ups RF Power Transistors for UHF 1996 Feb 12 File under Discrete Semiconductors, SC08b INTRODUCTION In this section, we present information on recommended circuit line-ups in the main RF power application areas. A comprehensive range of output power levels is
Typical Characteristics
KSP94 High Voltage Transistor • High Collector-Emitter Voltage: VCEO= -400V • Low Collector-Emitter Saturation Voltage • Complement to KSP44 1 TO-92 1. Emitter 2. Base 3. Collector PNP Epitaxial Silicon Transistor Absolute Maximum Ratings Ta=25°C unless otherwise noted Symbol Parameter Value Units V
DISCRETE SEMICONDUCTORS DATA SHEET J308; J309; J310 N-channel silicon field-effect transistors Product specification 1996 Jul 30 Supersedes data of April 1995
DISCRETE SEMICONDUCTORS DATA SHEET J308; J309; J310 N-channel silicon field-effect transistors Product specification 1996 Jul 30 Supersedes data of April 1995 File under Discrete Semiconductors, SC07 FEATURES PINNING - TO-92 • Low noise PIN SYMBOL DESCRIPTION • Interchangeability of drain and source
Order this document SEMICONDUCTOR TECHNICAL DATA by MAC223/D Silicon Bidirectional Triode Thyristors
Order this document SEMICONDUCTOR TECHNICAL DATA by MAC223/D Silicon Bidirectional Triode Thyristors .designed primarily for full-wave ac control applications such as lighting sysjtems, heater controls, motor controls and power supplies; or wherever full-wave silicon- gate-controlled devices are nee
Order this document SEMICONDUCTOR TECHNICAL DATA by MAC218FP/D Silicon Bidirectional Thyristors
Order this document SEMICONDUCTOR TECHNICAL DATA by MAC218FP/D Silicon Bidirectional Thyristors ISOLATED TRIACs .designed primarily for full-wave ac control applications, such as light dimmers, THYRISTORS motor controls, heating controls and power supplies. 8 AMPERES RMS • Blocking Voltage to 800 Vo
Order this document SEMICONDUCTOR TECHNICAL DATA by MAC212FP/D Silicon Bidirectional Thyristors
Order this document SEMICONDUCTOR TECHNICAL DATA by MAC212FP/D Silicon Bidirectional Thyristors .designed primarily for full-wave ac control applications, such as light dimmers, ISOLATED TRIACs motor controls, heating controls and power supplies; or wherever full-wave silicon THYRISTORS gate control
Order this document SEMICONDUCTOR TECHNICAL DATA by MAC218/D Silicon Bidirectional Thyristors
Order this document SEMICONDUCTOR TECHNICAL DATA by MAC218/D Silicon Bidirectional Thyristors .designed primarily for full-wave ac control applications, such as light dimmers, motor controls, heating controls and power supplies. TRIACs • Blocking Voltage to 800 Volts 8 AMPERES RMS • Glass Passivated
SEMICONDUCTOR TECHNICAL DATA Silicon Bidirectional Thyristors .designed primarily for full-wave ac control applications, such as light dimmers,
SEMICONDUCTOR TECHNICAL DATA Silicon Bidirectional Thyristors .designed primarily for full-wave ac control applications, such as light dimmers, motor controls, heating controls and power supplies; or wherever full-wave silicon gate controlled solid-state devices are needed. Triac type thyristors swi
Order this document SEMICONDUCTOR TECHNICAL DATA by MAC210FP/D Silicon Bidirectional Thyristors
Order this document SEMICONDUCTOR TECHNICAL DATA by MAC210FP/D Silicon Bidirectional Thyristors .designed primarily for full-wave ac control applications, such as light dimmers, ISOLATED TRIACs motor controls, heating controls and power supplies; or wherever full-wave silicon THYRISTORS gate control
SEMICONDUCTOR TECHNICAL DATA Silicon Bidirectional Thyristors .designed primarily for full-wave ac control applications, such as light dimmers,
SEMICONDUCTOR TECHNICAL DATA Silicon Bidirectional Thyristors .designed primarily for full-wave ac control applications, such as light dimmers, motor controls, heating controls and power supplies; or wherever full-wave silicon gate controlled solid-state devices are needed. Triac type thyristors swi
Order this document SEMICONDUCTOR TECHNICAL DATA by MAC15S/D Silicon Bidirectional Thyristors
Order this document SEMICONDUCTOR TECHNICAL DATA by MAC15S/D Silicon Bidirectional Thyristors Designed for industrial and consumer applications for full wave control of ac TRIACS loads such as appliance controls, heater controls, motor controls, and other 15 AMPERES RMS power switching applications.