Download: Order this document SEMICONDUCTOR TECHNICAL DATA by 1SMA5913BT3/D !" !! ! "

Order this document SEMICONDUCTOR TECHNICAL DATA by 1SMA5913BT3/D !" !! ! " "! This complete new line of 1.5 Watt Zener Diodes offers the following PLASTIC SURFACE advantages. MOUNT ZENER DIODES Specification Features: 1.5 WATTS • Voltage Range – 3.3 to 68 V 3.3–68 VOLTS • ESD Rating of Class 3 (>16 kV) per Human Body Model • Flat Handling Surface for Accurate Placement • Package Design for Top Side or Bottom Circuit Board Mounting • Low Profile Package • Available in Tape and Reel • Ideal Replacement for MELF Packages Mechanical Characteristics: SMA CASE 403B–01 • Case: Void–free, transfer-m...
Author: Filibert Took Shared: 8/19/19
Downloads: 414 Views: 4069

Content

Order this document SEMICONDUCTOR TECHNICAL DATA by 1SMA5913BT3/D

!" !! ! " "! This complete new line of 1.5 Watt Zener Diodes offers the following PLASTIC SURFACE advantages. MOUNT ZENER

DIODES

Specification Features: 1.5 WATTS • Voltage Range – 3.3 to 68 V 3.3–68 VOLTS • ESD Rating of Class 3 (>16 kV) per Human Body Model • Flat Handling Surface for Accurate Placement • Package Design for Top Side or Bottom Circuit Board Mounting • Low Profile Package • Available in Tape and Reel • Ideal Replacement for MELF Packages Mechanical Characteristics: SMA CASE 403B–01 • Case: Void–free, transfer-molded plastic PLASTIC • Maximum Case Temperature for Soldering Purposes: 260°C for 10 seconds • Finish: All external surfaces are corrosion resistant with readily solderable leads • Polarity: Cathode indicated by molded polarity notch • Mounted Position: Any MAXIMUM RATINGS AND CHARACTERISTICS Rating Symbol Value Unit DC Power Dissipation @ TL = 75°C (Note 1) PD 1.5 Watts Derate above 75°C 20 mW/°C DC Power Dissipation @ TA = 25°C (Note 1) PD 900 mW Derate above 25°C 7.2 mW/°C Thermal Resistance from Junction to Lead RθJL 29 °C/W Thermal Resistance from Junction to Ambient RθJA 111 °C/W Peak Forward Surge @ TA = 25°C, (JEDEC Method, Note 3) IFSM 20 Amps Typical Ppk Dissipation @ TL < 25°C, (Note 2, PW–10/1000 µs per Figure 8) Ppk 200 Watts Typical Ppk Dissipation @ TL < 25°C, (Note 2, PW–8/20 µs per Figure 9) Ppk 1000 Watts Operating and Storage Junction Temperature Range TJ, Tstg 150 °C 1. FR4 Board, using Motorola minimum recommended footprint, as shown in case 403B outline dimensions spec. 2. Non–repetitive current pulse. 3. Measured on 8.3 ms single half sine–wave or equivalent square wave, duty cycle = 4 pulse per minute maximum. REV11MSoMtoAro5la9, 1In3c.B 1T9936 through 1SMA5945BT3 MOTOROLA, ELECTRICAL CHARACTERISTICS (VF = 1.5 Volts @ IF = 200 mA for all types) Max Zener Impedance Max Reverse Leakage Current Nominal Zener Test Max DC Device Voltage VZ @ Current Z @ IZIDevce MarkingZT ZT ZK ZK IR VR Zener Current IZT Volts IZT mA Ohms Ohms mA µA Volts IZM mAdc 1SMA5913BT3 3.3 113.6 10 500 1.0 50 1.0 455 813B 1SMA5914BT3 3.6 104.2 9.0 500 1.0 35.5 1.0 417 814B 1SMA5915BT3 3.9 96.1 7.5 500 1.0 12.5 1.0 385 815B 1SMA5916BT3 4.3 87.2 6.0 500 1.0 2.5 1.0 349 816B 1SMA5917BT3 4.7 79.8 5.0 500 1.0 2.5 1.5 319 817B 1SMA5918BT3 5.1 73.5 4.0 350 1.0 2.5 2.0 294 818B 1SMA5919BT3 5.6 66.9 2.0 250 1.0 2.5 3.0 268 819B 1SMA5920BT3 6.2 60.5 2.0 200 1.0 2.5 4.0 242 820B 1SMA5921BT3 6.8 55.1 2.5 200 1.0 2.5 5.2 221 821B 1SMA5922BT3 7.5 50 3.0 400 0.5 2.5 6.5 200 822B 1SMA5923BT3 8.2 45.7 3.5 400 0.5 2.5 6.8 183 823B 1SMA5924BT3 9.1 41.2 4.0 500 0.5 2.5 7.0 165 824B 1SMA5925BT3 10 37.5 4.5 500 0.25 0.5 8.0 150 825B 1SMA5926BT3 11 34.1 5.5 550 0.25 0.5 8.4 136 826B 1SMA5927BT3 12 31.2 6.5 550 0.25 0.5 9.1 125 827B 1SMA5928BT3 13 28.8 7.0 550 0.25 0.5 9.9 115 828B 1SMA5929BT3 15 25 9.0 600 0.25 0.5 11.4 100 829B 1SMA5930BT3 16 23.4 10 600 0.25 0.5 12.2 94 830B 1SMA5931BT3 18 20.8 12 650 0.25 0.5 13.7 83 831B 1SMA5932BT3 20 18.7 14 650 0.25 0.5 15.2 75 832B 1SMA5933BT3 22 17 17.5 650 0.25 0.5 16.7 68 833B 1SMA5934BT3 24 15.6 19 700 0.25 0.5 18.2 63 834B 1SMA5935BT3 27 13.9 23 700 0.25 0.5 20.6 56 835B 1SMA5936BT3 30 12.5 26 750 0.25 0.5 22.8 50 836B 1SMA5937BT3 33 11.4 33 800 0.25 0.5 25.1 45 837B 1SMA5938BT3 36 10.4 38 850 0.25 0.5 27.4 42 838B 1SMA5939BT3 39 9.6 45 900 0.25 0.5 29.7 38 839B 1SMA5940BT3 43 8.7 53 950 0.25 0.5 32.7 35 840B 1SMA5941BT3 47 8.0 67 1000 0.25 0.5 35.8 32 841B 1SMA5942BT3 51 7.3 70 1100 0.25 0.5 38.8 29 842B 1SMA5943BT3 56 6.7 86 1300 0.25 0.5 42.6 27 843B 1SMA5944BT3 62 6.0 100 1500 0.25 0.5 47.1 24 844B 1SMA5945BT3 68 5.5 120 1700 0.25 0.5 51.7 22 845B NOTE: Tolerance and Voltage Designation Tolerance designation – The type number listed indicates a tolerance of ±5%. MOTOROLA 1SMA5913BT3 through 1SMA5945BT3,

Rating and Typical Characteristic Curves (TA = 25°C)

4 100 3.2 2.4

TL

1.6 0.8 TA 0 0.1 0 25 50 75 100 125 1500246810 T, TEMPERATURE (°C) VZ, ZENER VOLTAGE (VOLTS)

Figure 1. Steady State Power Derating Figure 2. VZ – 3.3 thru 10 Volts

10 100 8 VZ @ IZT VZ @ IZT –2 –4 10246810 12 10 100 VZ, ZENER VOLTAGE (VOLTS) VZ, ZENER VOLTAGE (VOLTS)

Figure 3. Zener Voltage – 3.3 to 12 Volts Figure 4. Zener Voltage – 14 to 68 Volts

IZ(dc) = 1 mA 10 10 mA IZ(rms) = 0.1 IZ(dc) 20 mA 10 100 VZ, ZENER VOLTAGE (VOLTS)

Figure 5. Effect of Zener Voltage

1SMA5913BT3 through 1SMA5945BT3 MOTOROLA θVZ, TEMPERATURE COEFFICIENT (mV/°C) PD, MAXIMUM POWER DISSIPATION (WATTS) ZZ, DYNAMIC IMPEDANCE (OHMS) θVZ, TEMPERATURE COEFFICIENT (mV/°C) IZ, ZENER CURRENT (mA),

Rating and Typical Characteristic Curves (TA = 25°C)

1000 10 NONREPETITIVE, EXPONENTIAL MEASURED @ PULSE WAVEFORM, TJ = 25°C ZERO BIAS MEASURED @ 100 VZ/2 0.1 TJ = 25°C 10 0.01 10 100 0.01 0.1 1 10 BREAKDOWN VOLTAGE (VOLTS) TP, PULSE WIDTH (ms)

Figure 6. Capacitance Curve Figure 7. Typical Pulse Rating Curve

120 120 = 10 µs TA = 25°C PW (I ) IS DEFINED AS THE 8/20 µs WAVEFORM 100 D 100POINT WHERE THE PEAK CURRENT AS DEFINED BY ANSI C62.1 PEAK VALUE DECAYS TO 50% OF I . 0.9 IPEAK AND IEC 801–5.pp 80 Ippm 80 60 HALF VALUE – Ipp/2 0.5 IPEAK 40 40 10/1000 µs WAVEFORM AS DEFINED BY R.E.A. 20 20 td 0.1IT= 8 µsPEAK0001234500.02 0.04 0.06 0.08 0.1 t, TIME (ms) T t, TIME (ms) 20 µs

Figure 8. Pulse Waveform Figure 9. Pulse Waveform MOTOROLA 1SMA5913BT3 through 1SMA5945BT3

Ippm, PEAK PULSE CURRENT (%) C, CAPACITANCE (pF) Ippm, PEAK PULSE Ppk, PEAK POWER (kW)CURRENT (%),

OUTLINE DIMENSIONS

0.157 4.0

S A

0.0787 2.0

D B

0.0787 inches 2.0 mm

SMA

NOTES:

C 1. DIMENSIONING AND TOLERANCING PER ANSIY14.5M, 1982.

2. CONTROLLING DIMENSION: INCH. INCHES MILLIMETERS

H J DIM MIN MAX MIN MAXK A 0.160 0.180 4.06 4.57

B 0.090 0.115 2.29 2.92 C 0.075 0.105 1.91 2.67 D 0.050 0.064 1.27 1.63 H 0.004 0.008 0.10 0.20 J 0.006 0.016 0.15 0.41 K 0.030 0.060 0.76 1.52 S 0.190 0.220 4.83 5.59

CASE 403B–01 ISSUE O

1SMA5913BT3 through 1SMA5945BT3 MOTOROLA, Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters which may be provided in Motorola data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. How to reach us: USA/EUROPE/Locations Not Listed: Motorola Literature Distribution; JAPAN: Nippon Motorola Ltd.; Tatsumi–SPD–JLDC, 6F Seibu–Butsuryu–Center, P.O. Box 20912; Phoenix, Arizona 85036. 1–800–441–2447 or 602–303–5454 3–14–2 Tatsumi Koto–Ku, Tokyo 135, Japan. 03–81–3521–8315 MFAX: email is hidden – TOUCHTONE 602–244–6609 ASIA/PACIFIC: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park, INTERNET: http://Design–NET.com 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852–26629298 1SMA5913BT3/D

MOTOROLA ◊ 1SMA5913BT3 through 1SMA5945BT3

]
15

Similar documents

Order this document SEMICONDUCTOR TECHNICAL DATA by 1SMA5.0AT3/D
Order this document SEMICONDUCTOR TECHNICAL DATA by 1SMA5.0AT3/D Specification Features: • Reverse Stand–Off Voltage Range: 5.0–78 V • Peak Power — 400 Watts @ 1.0 ms PLASTIC SURFACE MOUNT • ESD Rating of Class 3 (>16 kV) per Human Body Model ZENER OVERVOLTAGE • Pico Seconds Response Time (0 V to BV
Order this document SEMICONDUCTOR TECHNICAL DATA by 1SMA10CAT3/D
Order this document SEMICONDUCTOR TECHNICAL DATA by 1SMA10CAT3/D Specification Features: • Reverse Stand–Off Voltage Range: 10–78 V • Bidirectional Operation PLASTIC SURFACE MOUNT • Peak Power — 400 Watts @ 1.0 ms BIDIRECTIONAL ZENER OVERVOLTAGE • ESD Rating of Class 3 (>16 kV) per Human Body Model
Order this document SEMICONDUCTOR TECHNICAL DATA by 1PMT5913BT3/D %#
Order this document SEMICONDUCTOR TECHNICAL DATA by 1PMT5913BT3/D %#"& %% $% &# "&!% "! !# "$ "'# % This complete new line of zener/tvs diodes offers a 2.5 watt series in a micro PLASTIC SURFACE MOUNT miniature, space saving surface mount package. The Powermite zener/tvs ZENER DIODES diodes are desi
SEMICONDUCTOR 5 Watt Surmetic 40 1N5333B Silicon Zener Diodes through 1N5388B
MOTOROLA SEMICONDUCTOR TECHNICAL DATA 5 Watt Surmetic 40 1N5333B Silicon Zener Diodes through 1N5388B This is a complete series of 5 Watt Zener Diodes with tight limits and better operating characteristics that reflect the superior capabilities of silicon-oxide-passivated junctions. All this is in a
MOTOROLA SEMICONDUCTOR TECHNICAL DATA
MOTOROLA SEMICONDUCTOR TECHNICAL DATA Field-effect current regulator diodes are circuit elements that provide a current essentially independent of voltage. These diodes are especially designed for maximum impedance over the operating range. These devices may be used in parallel to obtain higher curr
Order this document  POWERTAP II Package
Order this document SEMICONDUCTOR TECHNICAL DATA by XBRP40045CTL/D POWERTAP II Package .employing the Schottky Barrier principle in a large area metal–to–silicon SCHOTTKY BARRIER power diode. State–of–the–art geometry features epitaxial construction with RECTIFIER oxide passivation and metal overla
Order this document  POWERTAP II Package
Order this document SEMICONDUCTOR TECHNICAL DATA by XBRP400100CTL/D POWERTAP II Package .employing the Schottky Barrier principle in a large area metal–to–silicon SCHOTTKY BARRIER power diode. State–of–the–art geometry features epitaxial construction with RECTIFIER oxide passivation and metal overl
Features Package Applications
SEMICONDUCTORRURU50120 April 1995 50A, 1200V Ultrafast Diode Features Package • Ultrafast with Soft Recovery .< 125ns SINGLE LEAD JEDEC STYLE TO-218 • Operating Temperature ..+175oC ANODE • Reverse Voltage .1200V CATHODE • Avalanche Energy Rated (FLANGE) • Planar Construction Applications • Switchin
Advanced Power MOSFET IRFP250A FEATURES BVDSS = 200 V RDS(on) = 0.085 Ω Rugged Gate Oxide Technology Absolute Maximum Ratings
Advanced Power MOSFET IRFP250A FEATURES BVDSS = 200 V Avalanche Rugged Technology RDS(on) = 0.085 Ω Rugged Gate Oxide Technology Lower Input Capacitance ID = 32 A Improved Gate Charge Extended Safe Operating Area Lower Leakage Current : 10µA(Max.) @ VDS = 200V TO-3P Low RDS(ON) : 0.071 Ω (Typ.) 1.Ga
Advanced Power MOSFET IRF640A FEATURES BVDSS = 200VR= 0.18 Ω
Advanced Power MOSFET IRF640A FEATURES BVDSS = 200 V Avalanche Rugged Technology R = 0.18 Ω Rugged Gate Oxide Technology DS(on) Lower Input Capacitance ID = 18 A Improved Gate Charge Extended Safe Operating Area Lower Leakage Current : 10 µA (Max.) @ VDS = 200V TO-220 Lower RDS(ON) : 0.144 Ω(Typ.) 1
Electrical Characteristics @ TJ = 25°C (unless otherwise specified)
PD-91277A IRFZ46N HEXFET® Power MOSFET Advanced Process Technology D Ultra Low On-Resistance VDSS = 55V Dynamic dv/dt Rating 175°C Operating Temperature RDS(on) = 16.5mΩ Fast Switching G Fully Avalanche Rated ID = 53A S Description Advanced HEXFET® Power MOSFETs from International Rectifier utilize
Electrical Characteristics TC = 25°C unless otherwise noted
October 2001 IRF630B/IRFS630B 200V N-Channel MOSFET General Description Features These N-Channel enhancement mode power field effect • 9.0A, 200V, RDS(on) = 0.4Ω @VGS = 10 V transistors are produced using Fairchild’s proprietary, • Low gate charge ( typical 22 nC) planar, DMOS technology. • Low Crss
PRELIMINARY IRG4PC30KD INSULATED GATE BIPOLAR TRANSISTOR WITH Short Circuit Rated ULTRAFAST SOFT RECOVERY DIODE UltraFast IGBT Features C Benefits
PD -9.1587 PRELIMINARY IRG4PC30KD INSULATED GATE BIPOLAR TRANSISTOR WITH Short Circuit Rated ULTRAFAST SOFT RECOVERY DIODE UltraFast IGBT Features C • High short circuit rating optimized for motor control, VCES = 600V tsc =10µs, @360V VCE (start), TJ = 125°C, VGE = 15V • Combines low conduction loss
PRELIMINARY IRG4PC40KD INSULATED GATE BIPOLAR TRANSISTOR WITH Short Circuit Rated ULTRAFAST SOFT RECOVERY DIODE UltraFast IGBT Features C E
PD -9.1584 PRELIMINARY IRG4PC40KD INSULATED GATE BIPOLAR TRANSISTOR WITH Short Circuit Rated ULTRAFAST SOFT RECOVERY DIODE UltraFast IGBT Features C • Short Circuit Rated UltraFast: Optimized for VCES = 600V high operating frequencies >5.0 kHz , and Short Circuit Rated to 10µs @ 125°C, VGE = 15V • G
IRGBC40F
PD - 9.691A IRGBC40F INSULATED GATE BIPOLAR TRANSISTOR Fast Speed IGBT Features C • Switching-loss rating includes all "tail" losses • Optimized for medium operating frequency ( 1 to VCES = 600V 10kHz) See Fig. 1 for Current vs. Frequency curve VCE(sat) ≤ 2.0V G @VGE = 15V, IC = 27A E n-channel Desc
HEXFET® Power MOSFET Description
HEXFET® Power MOSFET Advanced Process Technology D Ultra Low On-Resistance VDSS = 40V Dynamic dv/dt Rating 175°C Operating Temperature RDS(on) = 4.0mΩ Fast Switching G Fully Avalanche Rated ID = 160A S Description Seventh Generation HEXFET® power MOSFETs from International Rectifier utilize advanced
IRGPF30F
PD - 9.1026 IRGPF30F INSULATED GATE BIPOLAR TRANSISTOR Fast Speed IGBT Features C • Switching-loss rating includes all "tail" losses • Optimized for medium operating frequency (1 to VCES = 900V 10kHz) See Fig. 1 for Current vs. Frequency curve VCE(sat) ≤ 3.7V G @VGE = 15V, IC = 11A E n-channel Descr
DISCRETE SEMICONDUCTORS DATA SHEET J108; J109; J110 N-channel silicon junction FETs Product specification 1996 Jul 30 Supersedes data of April 1995 File under Discrete Semiconductors, SC07
DISCRETE SEMICONDUCTORS DATA SHEET J108; J109; J110 N-channel silicon junction FETs Product specification 1996 Jul 30 Supersedes data of April 1995 File under Discrete Semiconductors, SC07 FEATURES PINNING - TO-92 • High speed switching PIN SYMBOL DESCRIPTION • Interchangeability of drain and source
DISCRETE SEMICONDUCTORS DATA SHEET Line-ups RF Power Transistors for UHF 1996 Feb 12 File under Discrete Semiconductors, SC08b
DISCRETE SEMICONDUCTORS DATA SHEET Line-ups RF Power Transistors for UHF 1996 Feb 12 File under Discrete Semiconductors, SC08b INTRODUCTION In this section, we present information on recommended circuit line-ups in the main RF power application areas. A comprehensive range of output power levels is
Typical Characteristics
KSP94 High Voltage Transistor • High Collector-Emitter Voltage: VCEO= -400V • Low Collector-Emitter Saturation Voltage • Complement to KSP44 1 TO-92 1. Emitter 2. Base 3. Collector PNP Epitaxial Silicon Transistor Absolute Maximum Ratings Ta=25°C unless otherwise noted Symbol Parameter Value Units V
DISCRETE SEMICONDUCTORS DATA SHEET J308; J309; J310 N-channel silicon field-effect transistors Product specification 1996 Jul 30 Supersedes data of April 1995
DISCRETE SEMICONDUCTORS DATA SHEET J308; J309; J310 N-channel silicon field-effect transistors Product specification 1996 Jul 30 Supersedes data of April 1995 File under Discrete Semiconductors, SC07 FEATURES PINNING - TO-92 • Low noise PIN SYMBOL DESCRIPTION • Interchangeability of drain and source
Order this document SEMICONDUCTOR TECHNICAL DATA by MAC223/D Silicon Bidirectional Triode Thyristors
Order this document SEMICONDUCTOR TECHNICAL DATA by MAC223/D Silicon Bidirectional Triode Thyristors .designed primarily for full-wave ac control applications such as lighting sysjtems, heater controls, motor controls and power supplies; or wherever full-wave silicon- gate-controlled devices are nee
Order this document SEMICONDUCTOR TECHNICAL DATA by MAC218FP/D Silicon Bidirectional Thyristors
Order this document SEMICONDUCTOR TECHNICAL DATA by MAC218FP/D Silicon Bidirectional Thyristors ISOLATED TRIACs .designed primarily for full-wave ac control applications, such as light dimmers, THYRISTORS motor controls, heating controls and power supplies. 8 AMPERES RMS • Blocking Voltage to 800 Vo
Order this document SEMICONDUCTOR TECHNICAL DATA by MAC212FP/D Silicon Bidirectional Thyristors
Order this document SEMICONDUCTOR TECHNICAL DATA by MAC212FP/D Silicon Bidirectional Thyristors .designed primarily for full-wave ac control applications, such as light dimmers, ISOLATED TRIACs motor controls, heating controls and power supplies; or wherever full-wave silicon THYRISTORS gate control
Order this document SEMICONDUCTOR TECHNICAL DATA by MAC218/D Silicon Bidirectional Thyristors
Order this document SEMICONDUCTOR TECHNICAL DATA by MAC218/D Silicon Bidirectional Thyristors .designed primarily for full-wave ac control applications, such as light dimmers, motor controls, heating controls and power supplies. TRIACs • Blocking Voltage to 800 Volts 8 AMPERES RMS • Glass Passivated
SEMICONDUCTOR TECHNICAL DATA Silicon Bidirectional Thyristors .designed primarily for full-wave ac control applications, such as light dimmers,
SEMICONDUCTOR TECHNICAL DATA Silicon Bidirectional Thyristors .designed primarily for full-wave ac control applications, such as light dimmers, motor controls, heating controls and power supplies; or wherever full-wave silicon gate controlled solid-state devices are needed. Triac type thyristors swi
Order this document SEMICONDUCTOR TECHNICAL DATA by MAC210FP/D Silicon Bidirectional Thyristors
Order this document SEMICONDUCTOR TECHNICAL DATA by MAC210FP/D Silicon Bidirectional Thyristors .designed primarily for full-wave ac control applications, such as light dimmers, ISOLATED TRIACs motor controls, heating controls and power supplies; or wherever full-wave silicon THYRISTORS gate control
SEMICONDUCTOR TECHNICAL DATA Silicon Bidirectional Thyristors .designed primarily for full-wave ac control applications, such as light dimmers,
SEMICONDUCTOR TECHNICAL DATA Silicon Bidirectional Thyristors .designed primarily for full-wave ac control applications, such as light dimmers, motor controls, heating controls and power supplies; or wherever full-wave silicon gate controlled solid-state devices are needed. Triac type thyristors swi
Order this document SEMICONDUCTOR TECHNICAL DATA by MAC15S/D Silicon Bidirectional Thyristors
Order this document SEMICONDUCTOR TECHNICAL DATA by MAC15S/D Silicon Bidirectional Thyristors Designed for industrial and consumer applications for full wave control of ac TRIACS loads such as appliance controls, heater controls, motor controls, and other 15 AMPERES RMS power switching applications.
SEMICONDUCTOR TECHNICAL DATA TRIACS 15 AMPERES RMS 400 thru 800 Designed for high performance full-wave ac control applications where high VOLTS noise immunity and high commutating di/dt are required.
SEMICONDUCTOR TECHNICAL DATA *Motorola preferred devices TRIACS 15 AMPERES RMS 400 thru 800 Designed for high performance full-wave ac control applications where high VOLTS noise immunity and high commutating di/dt are required. • Blocking Voltage to 800 Volts • On-State Current Rating of 15 Amperes