Download: Order this document SEMICONDUCTOR TECHNICAL DATA by 1SMA5.0AT3/D

Order this document SEMICONDUCTOR TECHNICAL DATA by 1SMA5.0AT3/D Specification Features: • Reverse Stand–Off Voltage Range: 5.0–78 V • Peak Power — 400 Watts @ 1.0 ms PLASTIC SURFACE MOUNT • ESD Rating of Class 3 (>16 kV) per Human Body Model ZENER OVERVOLTAGE • Pico Seconds Response Time (0 V to BV) TRANSIENT SUPPRESSORS 5.0–78 VOLTS V • Flat Handling Surface for Accurate Placement R400 WATTS PEAK POWER • Package Design for Top Side or Bottom Circuit Board Mounting • Available in Tape and Reel • Low Profile Package Mechanical Characteristics: • Case: Void–free, transfer-molded plastic • Maxim...
Author: Filibert Took Shared: 8/19/19
Downloads: 1170 Views: 3616

Content

Order this document SEMICONDUCTOR TECHNICAL DATA by 1SMA5.0AT3/D

Specification Features: • Reverse Stand–Off Voltage Range: 5.0–78 V • Peak Power — 400 Watts @ 1.0 ms PLASTIC SURFACE MOUNT • ESD Rating of Class 3 (>16 kV) per Human Body Model ZENER OVERVOLTAGE • Pico Seconds Response Time (0 V to BV) TRANSIENT SUPPRESSORS 5.0–78 VOLTS V • Flat Handling Surface for Accurate Placement R400 WATTS PEAK POWER • Package Design for Top Side or Bottom Circuit Board Mounting • Available in Tape and Reel • Low Profile Package Mechanical Characteristics: • Case: Void–free, transfer-molded plastic • Maximum Case Temperature for Soldering Purposes: 260°C for 10 seconds • Finish: All external surfaces are corrosion resistant with readily solderable SMA CASE 403B–01 leads PLASTIC • Polarity: Cathode indicated by molded polarity notch • Mounted Position: Any MAXIMUM RATINGS AND CHARACTERISTICS Rating Symbol Value Unit Peak Power Dissipation @ TL = 25°C, PW = 10/1000 µs (Note 1) Ppk 400 Watts Peak Forward Surge @ TA = 25°C (JEDEC Method, Note 2) IFSM 40 Amps Thermal Resistance from Junction to Lead RθJL 29 °C/W Thermal Resistance from Junction to Ambient RθJA 150 °C/W Instantaneous Forward Voltage @ 40 A VF 3.5 Volts Operating and Storage Junction Temperature Range TJ, Tstg 150 °C * FR4 Board, using Motorola minimum recommended footprint, as shown in case 403B outline dimensions spec. 1. Non–repetitive current pulse. 2. Measured on 0.3 ms single half sine–wave or equivalent square wave, duty cycle = 4 pulse per minute maximum. ELECTRICAL CHARACTERISTICS (VF = 3.5 Volts @ IF = 40 A for all types) Breakdown Voltage Maximum MaximumReverse Maximum Reverse Voltage Reverse Device Stand–off V Reverse Leakage Devce BR I @ IRSM Surge CurrentVoltage VRWM Volts T @ V Marking mA (Clamping Voltage) I

RWM

(Volts) RSM(Min) IR (µA)VRSM (Volts) (Amps) 1SMA5.0AT3 5.0 6.4 10 9.2 43.5 400 QE 1SMA6.0AT3 6.0 6.67 10 10.3 38.8 400 QG 1SMA6.5AT3 6.5 7.22 10 11.2 35.7 250 QK 1SMA7.0AT3 7.0 7.78 10 12.0 33.3 250 QM 1SMA7.5AT3 7.5 8.33 1 12.9 31.0 50 QP 1SMA8.0AT3 8.0 8.89 1 13.6 29.4 25 QR 1SMA8.5AT3 8.5 9.44 1 14.4 27.8 5.0 QT 1SMA9.0AT3 9.0 10 1 15.4 26.0 2.5 QV * TOLERANCE AND VOLTAGE DESIGNATION Tolerance designation – The type number listed indicates a tolerance of ±5%. (continued) REV 1 M1oStoMroAla5, I.n0cA. 1T939 6through 1SMA78AT3 MOTOROLA, ELECTRICAL CHARACTERISTICS — continued (VF = 3.5 Volts @ IF = 40 A for all types) Breakdown Voltage Maximum MaximumReverse Maximum Reverse Voltage Reverse Device Stand–off V Reverse Leakage Devce @ I Surge Current Voltage V BRRWM I

RSM

Volts T @ V Marking mA (Clamping Voltage) I

RWM

(Volts) RSM(Min) IR (µA)VRSM (Volts) (Amps) 1SMA10AT3 10 11.1 1 17.0 23.5 2.5 QX 1SMA11AT3 11 12.2 1 18.2 22.0 2.5 QZ 1SMA12AT3 12 13.3 1 19.9 20.1 2.5 RE 1SMA13AT3 13 14.4 1 21.5 18.6 2.5 RG 1SMA14AT3 14 15.6 1 23.2 17.2 2.5 RK 1SMA15AT3 15 16.7 1 24.4 16.4 2.5 RM 1SMA16AT3 16 17.8 1 26.0 15.4 2.5 RP 1SMA17AT3 17 18.9 1 27.6 14.5 2.5 RR 1SMA18AT3 18 20 1 29.2 13.7 2.5 RT 1SMA20AT3 20 22.2 1 32.4 12.3 2.5 RV 1SMA22AT3 22 24.4 1 35.5 11.3 2.5 RX 1SMA24AT3 24 26.7 1 38.9 10.3 2.5 RZ 1SMA26AT3 26 28.9 1 42.1 9.5 2.5 SE 1SMA28AT3 28 31.1 1 45.4 8.8 2.5 SG 1SMA30AT3 30 33.3 1 48.4 8.3 2.5 SK 1SMA33AT3 33 36.7 1 53.3 7.5 2.5 SM 1SMA36AT3 36 40 1 58.1 6.9 2.5 SP 1SMA40AT3 40 44.4 1 64.5 6.2 2.5 SR 1SMA43AT3 43 47.8 1 69.4 5.8 2.5 ST 1SMA45AT3 45 50 1 72.2 5.5 2.5 SV 1SMA48AT3 48 53.3 1 77.4 5.2 2.5 SX 1SMA51AT3 51 56.7 1 82.4 4.9 2.5 SZ 1SMA54AT3 54 60 1 87.1 4.6 2.5 TE 1SMA58AT3 58 64.4 1 93.6 4.8 2.5 TG 1SMA60AT3 60 66.7 1 96.8 4.1 2.5 TK 1SMA64AT3 64 71.1 1 103.0 3.9 2.5 TM 1SMA70AT3 70 77.8 1 113.0 3.5 2.5 TP 1SMA75AT3 75 83.3 1 121.0 3.3 2.5 TR 1SMA78AT3 78 86.7 1 126.0 3.2 2.5 TS * TOLERANCE AND VOLTAGE DESIGNATION Tolerance designation – The type number listed indicates a tolerance of ±5%. MOTOROLA 1SMA5.0AT3 through 1SMA78AT3,

RATING AND TYPICAL CHARACTERISTIC CURVES

100 120 = 10 µs TA = 25°CNONREPETITIVE PW (ID) IS DEFINED AS THEPULSE WAVEFORM 100 POINT WHERE THE PEAK CURRENT SHOWN IN FIGURE 2. PEAK VALUE DECAYS TO 50% OF I . 10 T pp A = 25°C 80 Ippm 60 HALF VALUE – Ipp/2 1 40 10/1000 µs WAVEFORM AS DEFINED BY R.E.A. td 0.1 0 10–4 0.001 0.01 0.1 1 10012345tP, PULSE WIDTH (ms) t, TIME (ms)

Figure 1. Pulse Rating Curve Figure 2. Pulse Waveform

120 10,000 10 x 1000 WAVEFORM TJ = 25°C 100 AS DEFINED BY R.E.A. f = 1 MHzMEASURED AT Vsig = 50 mVp–p ZERO BIAS 80 1,000 MEASURED AT 40 100 STAND–OFF VOLTAGE, VWM 0 10 0 40 80 120 160 20012510 20 50 100 200 TA, AMBIENT TEMPERATURE (°C) V(BR), BREAKDOWN VOLTAGE (VOLTS)

Figure 3. Pulse Derating Curve Figure 4. Typical Junction Capacitance TL

1 TA 0 50 100 150 T, TEMPERATURE (°C)

Figure 5. Steady State Power Derating

1SMA5.0AT3 through 1SMA78AT3 MOTOROLA PEAK PULSE DERATING IN % OF Ppk, PEAK POWER (kW) PEAK POWER OR CURRENT PD, MAXIMUM POWER DISSIPATION (WATTS) Ippm, PEAK PULSE CURRENT (%),

OUTLINE DIMENSIONS

0.157 4.0

S A

0.0787 2.0

D B

0.0787 inches 2.0 mm

SMA

NOTES:

C 1. DIMENSIONING AND TOLERANCING PER ANSIY14.5M, 1982.

2. CONTROLLING DIMENSION: INCH. INCHES MILLIMETERS

H J DIM MIN MAX MIN MAXK A 0.160 0.180 4.06 4.57

B 0.090 0.115 2.29 2.92 C 0.075 0.105 1.91 2.67 D 0.050 0.064 1.27 1.63 H 0.004 0.008 0.10 0.20 J 0.006 0.016 0.15 0.41 K 0.030 0.060 0.76 1.52 S 0.190 0.220 4.83 5.59

CASE 403B–01 ISSUE O

Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters which may be provided in Motorola data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. How to reach us: USA/EUROPE/Locations Not Listed: Motorola Literature Distribution; JAPAN: Nippon Motorola Ltd.; Tatsumi–SPD–JLDC, 6F Seibu–Butsuryu–Center, P.O. Box 20912; Phoenix, Arizona 85036. 1–800–441–2447 or 602–303–5454 3–14–2 Tatsumi Koto–Ku, Tokyo 135, Japan. 03–81–3521–8315 MFAX: email is hidden – TOUCHTONE 602–244–6609 ASIA/PACIFIC: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park, INTERNET: http://Design–NET.com 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852–26629298 ◊ 1SMA5.0AT3/DMOTOROLA 1SMA5.0AT3 through 1SMA78AT3]
15

Similar documents

Order this document SEMICONDUCTOR TECHNICAL DATA by 1SMA10CAT3/D
Order this document SEMICONDUCTOR TECHNICAL DATA by 1SMA10CAT3/D Specification Features: • Reverse Stand–Off Voltage Range: 10–78 V • Bidirectional Operation PLASTIC SURFACE MOUNT • Peak Power — 400 Watts @ 1.0 ms BIDIRECTIONAL ZENER OVERVOLTAGE • ESD Rating of Class 3 (>16 kV) per Human Body Model
Order this document SEMICONDUCTOR TECHNICAL DATA by 1PMT5913BT3/D %#
Order this document SEMICONDUCTOR TECHNICAL DATA by 1PMT5913BT3/D %#"& %% $% &# "&!% "! !# "$ "'# % This complete new line of zener/tvs diodes offers a 2.5 watt series in a micro PLASTIC SURFACE MOUNT miniature, space saving surface mount package. The Powermite zener/tvs ZENER DIODES diodes are desi
SEMICONDUCTOR 5 Watt Surmetic 40 1N5333B Silicon Zener Diodes through 1N5388B
MOTOROLA SEMICONDUCTOR TECHNICAL DATA 5 Watt Surmetic 40 1N5333B Silicon Zener Diodes through 1N5388B This is a complete series of 5 Watt Zener Diodes with tight limits and better operating characteristics that reflect the superior capabilities of silicon-oxide-passivated junctions. All this is in a
MOTOROLA SEMICONDUCTOR TECHNICAL DATA
MOTOROLA SEMICONDUCTOR TECHNICAL DATA Field-effect current regulator diodes are circuit elements that provide a current essentially independent of voltage. These diodes are especially designed for maximum impedance over the operating range. These devices may be used in parallel to obtain higher curr
Order this document  POWERTAP II Package
Order this document SEMICONDUCTOR TECHNICAL DATA by XBRP40045CTL/D POWERTAP II Package .employing the Schottky Barrier principle in a large area metal–to–silicon SCHOTTKY BARRIER power diode. State–of–the–art geometry features epitaxial construction with RECTIFIER oxide passivation and metal overla
Order this document  POWERTAP II Package
Order this document SEMICONDUCTOR TECHNICAL DATA by XBRP400100CTL/D POWERTAP II Package .employing the Schottky Barrier principle in a large area metal–to–silicon SCHOTTKY BARRIER power diode. State–of–the–art geometry features epitaxial construction with RECTIFIER oxide passivation and metal overl
Features Package Applications
SEMICONDUCTORRURU50120 April 1995 50A, 1200V Ultrafast Diode Features Package • Ultrafast with Soft Recovery .< 125ns SINGLE LEAD JEDEC STYLE TO-218 • Operating Temperature ..+175oC ANODE • Reverse Voltage .1200V CATHODE • Avalanche Energy Rated (FLANGE) • Planar Construction Applications • Switchin
Advanced Power MOSFET IRFP250A FEATURES BVDSS = 200 V RDS(on) = 0.085 Ω Rugged Gate Oxide Technology Absolute Maximum Ratings
Advanced Power MOSFET IRFP250A FEATURES BVDSS = 200 V Avalanche Rugged Technology RDS(on) = 0.085 Ω Rugged Gate Oxide Technology Lower Input Capacitance ID = 32 A Improved Gate Charge Extended Safe Operating Area Lower Leakage Current : 10µA(Max.) @ VDS = 200V TO-3P Low RDS(ON) : 0.071 Ω (Typ.) 1.Ga
Advanced Power MOSFET IRF640A FEATURES BVDSS = 200VR= 0.18 Ω
Advanced Power MOSFET IRF640A FEATURES BVDSS = 200 V Avalanche Rugged Technology R = 0.18 Ω Rugged Gate Oxide Technology DS(on) Lower Input Capacitance ID = 18 A Improved Gate Charge Extended Safe Operating Area Lower Leakage Current : 10 µA (Max.) @ VDS = 200V TO-220 Lower RDS(ON) : 0.144 Ω(Typ.) 1
Electrical Characteristics @ TJ = 25°C (unless otherwise specified)
PD-91277A IRFZ46N HEXFET® Power MOSFET Advanced Process Technology D Ultra Low On-Resistance VDSS = 55V Dynamic dv/dt Rating 175°C Operating Temperature RDS(on) = 16.5mΩ Fast Switching G Fully Avalanche Rated ID = 53A S Description Advanced HEXFET® Power MOSFETs from International Rectifier utilize
Electrical Characteristics TC = 25°C unless otherwise noted
October 2001 IRF630B/IRFS630B 200V N-Channel MOSFET General Description Features These N-Channel enhancement mode power field effect • 9.0A, 200V, RDS(on) = 0.4Ω @VGS = 10 V transistors are produced using Fairchild’s proprietary, • Low gate charge ( typical 22 nC) planar, DMOS technology. • Low Crss
PRELIMINARY IRG4PC30KD INSULATED GATE BIPOLAR TRANSISTOR WITH Short Circuit Rated ULTRAFAST SOFT RECOVERY DIODE UltraFast IGBT Features C Benefits
PD -9.1587 PRELIMINARY IRG4PC30KD INSULATED GATE BIPOLAR TRANSISTOR WITH Short Circuit Rated ULTRAFAST SOFT RECOVERY DIODE UltraFast IGBT Features C • High short circuit rating optimized for motor control, VCES = 600V tsc =10µs, @360V VCE (start), TJ = 125°C, VGE = 15V • Combines low conduction loss
PRELIMINARY IRG4PC40KD INSULATED GATE BIPOLAR TRANSISTOR WITH Short Circuit Rated ULTRAFAST SOFT RECOVERY DIODE UltraFast IGBT Features C E
PD -9.1584 PRELIMINARY IRG4PC40KD INSULATED GATE BIPOLAR TRANSISTOR WITH Short Circuit Rated ULTRAFAST SOFT RECOVERY DIODE UltraFast IGBT Features C • Short Circuit Rated UltraFast: Optimized for VCES = 600V high operating frequencies >5.0 kHz , and Short Circuit Rated to 10µs @ 125°C, VGE = 15V • G
IRGBC40F
PD - 9.691A IRGBC40F INSULATED GATE BIPOLAR TRANSISTOR Fast Speed IGBT Features C • Switching-loss rating includes all "tail" losses • Optimized for medium operating frequency ( 1 to VCES = 600V 10kHz) See Fig. 1 for Current vs. Frequency curve VCE(sat) ≤ 2.0V G @VGE = 15V, IC = 27A E n-channel Desc
HEXFET® Power MOSFET Description
HEXFET® Power MOSFET Advanced Process Technology D Ultra Low On-Resistance VDSS = 40V Dynamic dv/dt Rating 175°C Operating Temperature RDS(on) = 4.0mΩ Fast Switching G Fully Avalanche Rated ID = 160A S Description Seventh Generation HEXFET® power MOSFETs from International Rectifier utilize advanced
IRGPF30F
PD - 9.1026 IRGPF30F INSULATED GATE BIPOLAR TRANSISTOR Fast Speed IGBT Features C • Switching-loss rating includes all "tail" losses • Optimized for medium operating frequency (1 to VCES = 900V 10kHz) See Fig. 1 for Current vs. Frequency curve VCE(sat) ≤ 3.7V G @VGE = 15V, IC = 11A E n-channel Descr
DISCRETE SEMICONDUCTORS DATA SHEET J108; J109; J110 N-channel silicon junction FETs Product specification 1996 Jul 30 Supersedes data of April 1995 File under Discrete Semiconductors, SC07
DISCRETE SEMICONDUCTORS DATA SHEET J108; J109; J110 N-channel silicon junction FETs Product specification 1996 Jul 30 Supersedes data of April 1995 File under Discrete Semiconductors, SC07 FEATURES PINNING - TO-92 • High speed switching PIN SYMBOL DESCRIPTION • Interchangeability of drain and source
DISCRETE SEMICONDUCTORS DATA SHEET Line-ups RF Power Transistors for UHF 1996 Feb 12 File under Discrete Semiconductors, SC08b
DISCRETE SEMICONDUCTORS DATA SHEET Line-ups RF Power Transistors for UHF 1996 Feb 12 File under Discrete Semiconductors, SC08b INTRODUCTION In this section, we present information on recommended circuit line-ups in the main RF power application areas. A comprehensive range of output power levels is
Typical Characteristics
KSP94 High Voltage Transistor • High Collector-Emitter Voltage: VCEO= -400V • Low Collector-Emitter Saturation Voltage • Complement to KSP44 1 TO-92 1. Emitter 2. Base 3. Collector PNP Epitaxial Silicon Transistor Absolute Maximum Ratings Ta=25°C unless otherwise noted Symbol Parameter Value Units V
DISCRETE SEMICONDUCTORS DATA SHEET J308; J309; J310 N-channel silicon field-effect transistors Product specification 1996 Jul 30 Supersedes data of April 1995
DISCRETE SEMICONDUCTORS DATA SHEET J308; J309; J310 N-channel silicon field-effect transistors Product specification 1996 Jul 30 Supersedes data of April 1995 File under Discrete Semiconductors, SC07 FEATURES PINNING - TO-92 • Low noise PIN SYMBOL DESCRIPTION • Interchangeability of drain and source
Order this document SEMICONDUCTOR TECHNICAL DATA by MAC223/D Silicon Bidirectional Triode Thyristors
Order this document SEMICONDUCTOR TECHNICAL DATA by MAC223/D Silicon Bidirectional Triode Thyristors .designed primarily for full-wave ac control applications such as lighting sysjtems, heater controls, motor controls and power supplies; or wherever full-wave silicon- gate-controlled devices are nee
Order this document SEMICONDUCTOR TECHNICAL DATA by MAC218FP/D Silicon Bidirectional Thyristors
Order this document SEMICONDUCTOR TECHNICAL DATA by MAC218FP/D Silicon Bidirectional Thyristors ISOLATED TRIACs .designed primarily for full-wave ac control applications, such as light dimmers, THYRISTORS motor controls, heating controls and power supplies. 8 AMPERES RMS • Blocking Voltage to 800 Vo
Order this document SEMICONDUCTOR TECHNICAL DATA by MAC212FP/D Silicon Bidirectional Thyristors
Order this document SEMICONDUCTOR TECHNICAL DATA by MAC212FP/D Silicon Bidirectional Thyristors .designed primarily for full-wave ac control applications, such as light dimmers, ISOLATED TRIACs motor controls, heating controls and power supplies; or wherever full-wave silicon THYRISTORS gate control
Order this document SEMICONDUCTOR TECHNICAL DATA by MAC218/D Silicon Bidirectional Thyristors
Order this document SEMICONDUCTOR TECHNICAL DATA by MAC218/D Silicon Bidirectional Thyristors .designed primarily for full-wave ac control applications, such as light dimmers, motor controls, heating controls and power supplies. TRIACs • Blocking Voltage to 800 Volts 8 AMPERES RMS • Glass Passivated
SEMICONDUCTOR TECHNICAL DATA Silicon Bidirectional Thyristors .designed primarily for full-wave ac control applications, such as light dimmers,
SEMICONDUCTOR TECHNICAL DATA Silicon Bidirectional Thyristors .designed primarily for full-wave ac control applications, such as light dimmers, motor controls, heating controls and power supplies; or wherever full-wave silicon gate controlled solid-state devices are needed. Triac type thyristors swi
Order this document SEMICONDUCTOR TECHNICAL DATA by MAC210FP/D Silicon Bidirectional Thyristors
Order this document SEMICONDUCTOR TECHNICAL DATA by MAC210FP/D Silicon Bidirectional Thyristors .designed primarily for full-wave ac control applications, such as light dimmers, ISOLATED TRIACs motor controls, heating controls and power supplies; or wherever full-wave silicon THYRISTORS gate control
SEMICONDUCTOR TECHNICAL DATA Silicon Bidirectional Thyristors .designed primarily for full-wave ac control applications, such as light dimmers,
SEMICONDUCTOR TECHNICAL DATA Silicon Bidirectional Thyristors .designed primarily for full-wave ac control applications, such as light dimmers, motor controls, heating controls and power supplies; or wherever full-wave silicon gate controlled solid-state devices are needed. Triac type thyristors swi
Order this document SEMICONDUCTOR TECHNICAL DATA by MAC15S/D Silicon Bidirectional Thyristors
Order this document SEMICONDUCTOR TECHNICAL DATA by MAC15S/D Silicon Bidirectional Thyristors Designed for industrial and consumer applications for full wave control of ac TRIACS loads such as appliance controls, heater controls, motor controls, and other 15 AMPERES RMS power switching applications.
SEMICONDUCTOR TECHNICAL DATA TRIACS 15 AMPERES RMS 400 thru 800 Designed for high performance full-wave ac control applications where high VOLTS noise immunity and high commutating di/dt are required.
SEMICONDUCTOR TECHNICAL DATA *Motorola preferred devices TRIACS 15 AMPERES RMS 400 thru 800 Designed for high performance full-wave ac control applications where high VOLTS noise immunity and high commutating di/dt are required. • Blocking Voltage to 800 Volts • On-State Current Rating of 15 Amperes
SEMICONDUCTOR TECHNICAL DATA *Motorola preferred devices TRIACS Designed for high performance full-wave ac control applications where high 15 AMPERES RMS
SEMICONDUCTOR TECHNICAL DATA *Motorola preferred devices TRIACS Designed for high performance full-wave ac control applications where high 15 AMPERES RMS noise immunity and high commutating di/dt are required. 400 thru 800 • Blocking Voltage to 800 Volts VOLTS • On-State Current Rating of 15 Amperes