Download: MOTOROLA SEMICONDUCTOR TECHNICAL DATA

MOTOROLA SEMICONDUCTOR TECHNICAL DATA Field-effect current regulator diodes are circuit elements that provide a current essentially independent of voltage. These diodes are especially designed for maximum impedance over the operating range. These devices may be used in parallel to obtain higher currents. Manufacturing Locations: WAFER FAB: Phoenix, Arizona CURRENT ASSEMBLY/TEST: Phoenix, Arizona REGULATOR DIODES MAXIMUM RATINGS Rating Symbol Value Unit Peak Operating Voltage POV 100 Volts (TJ = –55°C to +200°C) Steady State Power Dissipation PD @ TL = 75°C 600 mW Derate above TL = 75°C 4.8 mW/...
Author: Filibert Took Shared: 8/19/19
Downloads: 1078 Views: 2296

Content

MOTOROLA SEMICONDUCTOR TECHNICAL DATA

Field-effect current regulator diodes are circuit elements that provide a current essentially independent of voltage. These diodes are especially designed for maximum impedance over the operating range. These devices may be used in parallel to obtain higher currents. Manufacturing Locations: WAFER FAB: Phoenix, Arizona CURRENT ASSEMBLY/TEST: Phoenix, Arizona REGULATOR

DIODES

MAXIMUM RATINGS Rating Symbol Value Unit Peak Operating Voltage POV 100 Volts (TJ = –55°C to +200°C) Steady State Power Dissipation PD @ TL = 75°C 600 mW Derate above TL = 75°C 4.8 mW/°C Lead Length = 3/8″ (Forward or Reverse Bias) Operating and Storage Junction TJ, Tstg –55 to +200 °C Temperature Range 9-2, ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted) Minimum Minimum Maximum Regulator Current Dynamic Knee Limiting IP (mA) @ VT = 25 V Impedance Impedance Voltage @ VT = 25 V @ VK = 6.0 V @ IL = 0.8 IP (min) Type No. Nom Min Max ZT (MΩ) ZK (MΩ) VL (Volts) 1N5283 0.22 0.198 0.242 25.0 2.75 1.00 1N5284 0.24 0.216 0.264 19.0 2.35 1.00 1N5285 0.27 0.243 0.297 14.0 1.95 1.00 1N5286 0.30 0.270 0.330 9.00 1.60 1.00 1N5287 0.33 0.297 0.363 6.60 1.35 1.00 1N5288 0.39 0.351 0.429 4.10 1.00 1.05 1N5289 0.43 0.387 0.473 3.30 0.870 1.05 1N5290 0.47 0.423 0.517 2.70 0.750 1.05 1N5291 0.56 0.504 0.616 1.90 0.560 1.10 1N5292 0.62 0.558 0.682 1.55 0.470 1.13 1N5293 0.68 0.612 0.748 1.35 0.400 1.15 1N5294 0.75 0.675 0.825 1.15 0.335 1.20 1N5295 0.82 0.738 0.902 1.00 0.290 1.25 1N5296 0.91 0.819 1.001 0.880 0.240 1.29 1N5297 1.00 0.900 1.100 0.800 0.205 1.35 1N5298 1.10 0.990 1.21 0.700 0.180 1.40 1N5299 1.20 1.08 1.32 0.640 0.155 1.45 1N5300 1.30 1.17 1.43 0.580 0.135 1.50 1N5301 1.40 1.26 1.54 0.540 0.115 1.55 1N5302 1.50 1.35 1.65 0.510 0.105 1.60 1N5303 1.60 1.44 1.76 0.475 0.092 1.65 1N5304 1.80 1.62 1.98 0.420 0.074 1.75 1N5305 2.00 1.80 2.20 0.395 0.061 1.85 1N5306 2.20 1.98 2.42 0.370 0.052 1.95 1N5307 2.40 2.16 2.64 0.345 0.044 2.00 1N5308 2.70 2.43 2.97 0.320 0.035 2.15 1N5309 3.00 2.70 3.30 0.300 0.029 2.25 1N5310 3.30 2.97 3.63 0.280 0.024 2.35 1N5311 3.60 3.24 3.96 0.265 0.020 2.50 1N5312 3.90 3.51 4.29 0.255 0.017 2.60 1N5313 4.30 3.87 4.73 0.245 0.014 2.75 1N5314 4.70 4.23 5.17 0.235 0.012 2.90 9-3, 5 SYMBOLS AND DEFINITIONS ZK @ VK IP & Z @ V4TTID — Diode Current. 3 IL — Limiting Current: 80% of IP minimum used to determine Limiting voltage, VL.2 IP — Pinch-off Current: Regulator current at specified TestVL @ I1 L

POV

Voltage, VT. POV — Peak Operating Voltage: Maximum voltage to be applied to device. –20 θl — Current Temperature Coefficient. –40 VAK — Anode-to-cathode Voltage. VK — Knee Impedance Test Voltage: Specified voltage used to –60 + – establish Knee Impedance, Z . REVERSE FORWARD K –80 ANODE CATHODE VL — Limiting Voltage: Measured at IL, VL, together with Knee AC Impedance, ZK, indicates the Knee characteristics of–100 –2 –1 0 20 40 60 80 100 120 140 160 the device. VT — Test Voltage: Voltage at which IP and ZT are specified. VAK, ANODE-CATHODE VOLTAGE (VOLTS) ZK — Knee AC Impedance at Test Voltage: To test for ZK, a 90 Hz signal VK with RMS value equal to 10% of test voltage,Figure 1. Typical Current Regulator VK, is superimposed on VK:

Characteristics ZK = VK/iK

where iK is the resultant ac current due to VK. To provide the most constant current from the diode, ZK should be as high as possible; therefore, a minimum value of ZK is specified. 300 ZT — AC Impedance at Test Voltage: Specified as a minimum value. To test for ZT, a 90 Hz signal with RMS value equal to 10% of Test Voltage VT, is superimposed on VT.

APPLICATION NOTE

200 As the current available from the diode is temperature dependent, POINT OF LEAD TEMPERATURE it is necessary to determine junction temperature, TJ, under specific MEASUREMENT operating conditions to calculate the value of the diode current. The 150 following procedure is recommended: Lead Temperature, TL, shall be determined from: TL = θLA PD + T100LLAwhere θ is lead-to-ambient thermal resistance (MOST HEAT CONDUCTION IS LAand PD is power dissipation.THROUGH THE CATHODE LEAD) 50 θLA is generally 30–40°C/W for the various clips and tie points 0 0.2 0.4 0.6 0.8 1 in common use, and for printed circuit-board wiring. Junction Temperature, TJ, shall be calculated from:L, LEAD LENGTH (INCHES) TJ = TL + θJL PD

Figure 2. Typical Thermal Resistance where θJL is taken from Figure 2.

For circuit design limits of VAK, limits of PD may be estimated and extremes of TJ may be computed. Using the information on Figures 4 and 5, changes in current may be found. To improve current regulation, keep VAK low to reduce PD and keep the leads short, especially the cathode lead, to reduce θJL. 7 TJ = 25°C 5 POV = 100 V 1N5313 1N5309 2 (DATA OBTAINED FROM PULSE TESTS) 1N5305 1 1N5298 0.7 0.5 1N5290 0.3 0.2 0.1 0.1 0.2 0.3 0.5 0.71235710 20 30 50 70 100 VAK, ANODE-CATHODE VOLTAGE (VOLTS)

Figure 3. Typical Forward Characteristics

9-4 ID, FORWARD DIODE CURRENT (mA) θJL, JUNCTION-TO-LEAD THERMAL RESISTANCE (°C/W) ID, DIODE CURRENT (mA) REVERSE FORWARD, 0.7 0.6 0.5 TJ = +25°C TO +150°C

V

0.4 AK = 25 V θI 0.3 ∆IP = I ∆T (°C)100 P(nom) J 0.2 0.1 RANGE*

TYPICAL

–0.1 –0.2 –0.3 –0.4 –0.5 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.912345IP, NOMINAL PINCH-OFF CURRENT (mA)

Figure 4. Temperature Coefficient

0.8 0.6 TJ = –55°C TO +25°C VAK = 25 V 0.4 θ ∆IP = I IP(nom) ∆TJ (°C)0.2 100 RANGE*

TYPICAL

–0.2 –0.4 –0.6 –0.8 –1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.912345IP, NOMINAL PINCH-OFF CURRENT (mA)

Figure 5. Temperature Coefficient

0.1 –0.1 –0.2 –0.3

TYPICAL

–0.4 RANGE* –0.5 –0.6 –0.7 TA = 25°C ∆VAK = 40 V, VAK VARIED FROM 10 V TO 50 V–0.8 ∆IP = IP @ 50 V – IP @ 10 V –0.9 1/2″ LEAD LENGTH, θLA = 30°C/W –1 –1.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.912345IP, NOMINAL PINCH-OFF CURRENT (mA) *90% of the units will be in the ranges shown.

Figure 6. Current Regulation Factor

9-5 ∆ IP, CURRENT CHANGE (mA) θ I , TEMPERATURE COEFFICIENT (%/ °C) θ I , TEMPERATURE COEFFICIENT (%/ °C),

Current Regulator Diodes — Axial Leaded

1.5 Watt DC Power

B

NOTES:

D 1. PACKAGE CONTOUR OPTIONAL WITHIN DIA B

AND LENGTH A. HEAT SLUGS, IF ANY, SHALL BE INCLUDED WITHIN THIS CYLINDER, BUT SHALL

K NOT BE SUBJECT TO THE MIN LIMIT OF DIA B.

2. LEAD DIA NOT CONTROLLED IN ZONES F, TO

F ALLOW FOR FLASH, LEAD FINISH BUILDUP,

AND MINOR IRREGULARITIES OTHER THAN HEAT SLUGS.

A MILLIMETERS INCHES

DIM MIN MAX MIN MAX A 5.84 7.62 0.230 0.300

F B 2.16 2.72 0.085 0.107

D 0.46 0.56 0.018 0.022

K F — 1.27 — 0.050

K 25.40 38.10 1.000 1.500 All JEDEC dimensions and notes apply

DO-204AA GLASS

(Refer to Section 10 for Surface Mount, Thermal Data and Footprint Information.)

MULTIPLE PACKAGE QUANTITY (MPQ) REQUIREMENTS Package Option Type No. Suffix MPQ (Units) Tape and Reel RL 2.5K Bulk (None) 500

(Refer to Section 10 for more information on Packaging Specifications.) Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters can and do vary in different applications. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. Literature Distribution Centers: USA: Motorola Literature Distribution; P.O. Box 20912; Phoenix, Arizona 85036. EUROPE: Motorola Ltd.; European Literature Centre; 88 Tanners Drive, Blakelands, Milton Keynes, MK14 5BP, England. JAPAN: Nippon Motorola Ltd.; 4-32-1, Nishi-Gotanda, Shinagawa-ku, Tokyo 141, Japan. ASIA PACIFIC: Motorola Semiconductors H.K. Ltd.; Silicon Harbour Center, No. 2 Dai King Street, Tai Po Industrial Estate, Tai Po, N.T., Hong Kong. 1.5 Watt DC Power Data Sheet ◊ Motorola TVS/Zener Device Data 9-6]
15

Similar documents

Order this document  POWERTAP II Package
Order this document SEMICONDUCTOR TECHNICAL DATA by XBRP40045CTL/D POWERTAP II Package .employing the Schottky Barrier principle in a large area metal–to–silicon SCHOTTKY BARRIER power diode. State–of–the–art geometry features epitaxial construction with RECTIFIER oxide passivation and metal overla
Order this document  POWERTAP II Package
Order this document SEMICONDUCTOR TECHNICAL DATA by XBRP400100CTL/D POWERTAP II Package .employing the Schottky Barrier principle in a large area metal–to–silicon SCHOTTKY BARRIER power diode. State–of–the–art geometry features epitaxial construction with RECTIFIER oxide passivation and metal overl
Features Package Applications
SEMICONDUCTORRURU50120 April 1995 50A, 1200V Ultrafast Diode Features Package • Ultrafast with Soft Recovery .< 125ns SINGLE LEAD JEDEC STYLE TO-218 • Operating Temperature ..+175oC ANODE • Reverse Voltage .1200V CATHODE • Avalanche Energy Rated (FLANGE) • Planar Construction Applications • Switchin
Advanced Power MOSFET IRFP250A FEATURES BVDSS = 200 V RDS(on) = 0.085 Ω Rugged Gate Oxide Technology Absolute Maximum Ratings
Advanced Power MOSFET IRFP250A FEATURES BVDSS = 200 V Avalanche Rugged Technology RDS(on) = 0.085 Ω Rugged Gate Oxide Technology Lower Input Capacitance ID = 32 A Improved Gate Charge Extended Safe Operating Area Lower Leakage Current : 10µA(Max.) @ VDS = 200V TO-3P Low RDS(ON) : 0.071 Ω (Typ.) 1.Ga
Advanced Power MOSFET IRF640A FEATURES BVDSS = 200VR= 0.18 Ω
Advanced Power MOSFET IRF640A FEATURES BVDSS = 200 V Avalanche Rugged Technology R = 0.18 Ω Rugged Gate Oxide Technology DS(on) Lower Input Capacitance ID = 18 A Improved Gate Charge Extended Safe Operating Area Lower Leakage Current : 10 µA (Max.) @ VDS = 200V TO-220 Lower RDS(ON) : 0.144 Ω(Typ.) 1
Electrical Characteristics @ TJ = 25°C (unless otherwise specified)
PD-91277A IRFZ46N HEXFET® Power MOSFET Advanced Process Technology D Ultra Low On-Resistance VDSS = 55V Dynamic dv/dt Rating 175°C Operating Temperature RDS(on) = 16.5mΩ Fast Switching G Fully Avalanche Rated ID = 53A S Description Advanced HEXFET® Power MOSFETs from International Rectifier utilize
Electrical Characteristics TC = 25°C unless otherwise noted
October 2001 IRF630B/IRFS630B 200V N-Channel MOSFET General Description Features These N-Channel enhancement mode power field effect • 9.0A, 200V, RDS(on) = 0.4Ω @VGS = 10 V transistors are produced using Fairchild’s proprietary, • Low gate charge ( typical 22 nC) planar, DMOS technology. • Low Crss
PRELIMINARY IRG4PC30KD INSULATED GATE BIPOLAR TRANSISTOR WITH Short Circuit Rated ULTRAFAST SOFT RECOVERY DIODE UltraFast IGBT Features C Benefits
PD -9.1587 PRELIMINARY IRG4PC30KD INSULATED GATE BIPOLAR TRANSISTOR WITH Short Circuit Rated ULTRAFAST SOFT RECOVERY DIODE UltraFast IGBT Features C • High short circuit rating optimized for motor control, VCES = 600V tsc =10µs, @360V VCE (start), TJ = 125°C, VGE = 15V • Combines low conduction loss
PRELIMINARY IRG4PC40KD INSULATED GATE BIPOLAR TRANSISTOR WITH Short Circuit Rated ULTRAFAST SOFT RECOVERY DIODE UltraFast IGBT Features C E
PD -9.1584 PRELIMINARY IRG4PC40KD INSULATED GATE BIPOLAR TRANSISTOR WITH Short Circuit Rated ULTRAFAST SOFT RECOVERY DIODE UltraFast IGBT Features C • Short Circuit Rated UltraFast: Optimized for VCES = 600V high operating frequencies >5.0 kHz , and Short Circuit Rated to 10µs @ 125°C, VGE = 15V • G
IRGBC40F
PD - 9.691A IRGBC40F INSULATED GATE BIPOLAR TRANSISTOR Fast Speed IGBT Features C • Switching-loss rating includes all "tail" losses • Optimized for medium operating frequency ( 1 to VCES = 600V 10kHz) See Fig. 1 for Current vs. Frequency curve VCE(sat) ≤ 2.0V G @VGE = 15V, IC = 27A E n-channel Desc
HEXFET® Power MOSFET Description
HEXFET® Power MOSFET Advanced Process Technology D Ultra Low On-Resistance VDSS = 40V Dynamic dv/dt Rating 175°C Operating Temperature RDS(on) = 4.0mΩ Fast Switching G Fully Avalanche Rated ID = 160A S Description Seventh Generation HEXFET® power MOSFETs from International Rectifier utilize advanced
IRGPF30F
PD - 9.1026 IRGPF30F INSULATED GATE BIPOLAR TRANSISTOR Fast Speed IGBT Features C • Switching-loss rating includes all "tail" losses • Optimized for medium operating frequency (1 to VCES = 900V 10kHz) See Fig. 1 for Current vs. Frequency curve VCE(sat) ≤ 3.7V G @VGE = 15V, IC = 11A E n-channel Descr
DISCRETE SEMICONDUCTORS DATA SHEET J108; J109; J110 N-channel silicon junction FETs Product specification 1996 Jul 30 Supersedes data of April 1995 File under Discrete Semiconductors, SC07
DISCRETE SEMICONDUCTORS DATA SHEET J108; J109; J110 N-channel silicon junction FETs Product specification 1996 Jul 30 Supersedes data of April 1995 File under Discrete Semiconductors, SC07 FEATURES PINNING - TO-92 • High speed switching PIN SYMBOL DESCRIPTION • Interchangeability of drain and source
DISCRETE SEMICONDUCTORS DATA SHEET Line-ups RF Power Transistors for UHF 1996 Feb 12 File under Discrete Semiconductors, SC08b
DISCRETE SEMICONDUCTORS DATA SHEET Line-ups RF Power Transistors for UHF 1996 Feb 12 File under Discrete Semiconductors, SC08b INTRODUCTION In this section, we present information on recommended circuit line-ups in the main RF power application areas. A comprehensive range of output power levels is
Typical Characteristics
KSP94 High Voltage Transistor • High Collector-Emitter Voltage: VCEO= -400V • Low Collector-Emitter Saturation Voltage • Complement to KSP44 1 TO-92 1. Emitter 2. Base 3. Collector PNP Epitaxial Silicon Transistor Absolute Maximum Ratings Ta=25°C unless otherwise noted Symbol Parameter Value Units V
DISCRETE SEMICONDUCTORS DATA SHEET J308; J309; J310 N-channel silicon field-effect transistors Product specification 1996 Jul 30 Supersedes data of April 1995
DISCRETE SEMICONDUCTORS DATA SHEET J308; J309; J310 N-channel silicon field-effect transistors Product specification 1996 Jul 30 Supersedes data of April 1995 File under Discrete Semiconductors, SC07 FEATURES PINNING - TO-92 • Low noise PIN SYMBOL DESCRIPTION • Interchangeability of drain and source
Order this document SEMICONDUCTOR TECHNICAL DATA by MAC223/D Silicon Bidirectional Triode Thyristors
Order this document SEMICONDUCTOR TECHNICAL DATA by MAC223/D Silicon Bidirectional Triode Thyristors .designed primarily for full-wave ac control applications such as lighting sysjtems, heater controls, motor controls and power supplies; or wherever full-wave silicon- gate-controlled devices are nee
Order this document SEMICONDUCTOR TECHNICAL DATA by MAC218FP/D Silicon Bidirectional Thyristors
Order this document SEMICONDUCTOR TECHNICAL DATA by MAC218FP/D Silicon Bidirectional Thyristors ISOLATED TRIACs .designed primarily for full-wave ac control applications, such as light dimmers, THYRISTORS motor controls, heating controls and power supplies. 8 AMPERES RMS • Blocking Voltage to 800 Vo
Order this document SEMICONDUCTOR TECHNICAL DATA by MAC212FP/D Silicon Bidirectional Thyristors
Order this document SEMICONDUCTOR TECHNICAL DATA by MAC212FP/D Silicon Bidirectional Thyristors .designed primarily for full-wave ac control applications, such as light dimmers, ISOLATED TRIACs motor controls, heating controls and power supplies; or wherever full-wave silicon THYRISTORS gate control
Order this document SEMICONDUCTOR TECHNICAL DATA by MAC218/D Silicon Bidirectional Thyristors
Order this document SEMICONDUCTOR TECHNICAL DATA by MAC218/D Silicon Bidirectional Thyristors .designed primarily for full-wave ac control applications, such as light dimmers, motor controls, heating controls and power supplies. TRIACs • Blocking Voltage to 800 Volts 8 AMPERES RMS • Glass Passivated
SEMICONDUCTOR TECHNICAL DATA Silicon Bidirectional Thyristors .designed primarily for full-wave ac control applications, such as light dimmers,
SEMICONDUCTOR TECHNICAL DATA Silicon Bidirectional Thyristors .designed primarily for full-wave ac control applications, such as light dimmers, motor controls, heating controls and power supplies; or wherever full-wave silicon gate controlled solid-state devices are needed. Triac type thyristors swi
Order this document SEMICONDUCTOR TECHNICAL DATA by MAC210FP/D Silicon Bidirectional Thyristors
Order this document SEMICONDUCTOR TECHNICAL DATA by MAC210FP/D Silicon Bidirectional Thyristors .designed primarily for full-wave ac control applications, such as light dimmers, ISOLATED TRIACs motor controls, heating controls and power supplies; or wherever full-wave silicon THYRISTORS gate control
SEMICONDUCTOR TECHNICAL DATA Silicon Bidirectional Thyristors .designed primarily for full-wave ac control applications, such as light dimmers,
SEMICONDUCTOR TECHNICAL DATA Silicon Bidirectional Thyristors .designed primarily for full-wave ac control applications, such as light dimmers, motor controls, heating controls and power supplies; or wherever full-wave silicon gate controlled solid-state devices are needed. Triac type thyristors swi
Order this document SEMICONDUCTOR TECHNICAL DATA by MAC15S/D Silicon Bidirectional Thyristors
Order this document SEMICONDUCTOR TECHNICAL DATA by MAC15S/D Silicon Bidirectional Thyristors Designed for industrial and consumer applications for full wave control of ac TRIACS loads such as appliance controls, heater controls, motor controls, and other 15 AMPERES RMS power switching applications.
SEMICONDUCTOR TECHNICAL DATA TRIACS 15 AMPERES RMS 400 thru 800 Designed for high performance full-wave ac control applications where high VOLTS noise immunity and high commutating di/dt are required.
SEMICONDUCTOR TECHNICAL DATA *Motorola preferred devices TRIACS 15 AMPERES RMS 400 thru 800 Designed for high performance full-wave ac control applications where high VOLTS noise immunity and high commutating di/dt are required. • Blocking Voltage to 800 Volts • On-State Current Rating of 15 Amperes
SEMICONDUCTOR TECHNICAL DATA *Motorola preferred devices TRIACS Designed for high performance full-wave ac control applications where high 15 AMPERES RMS
SEMICONDUCTOR TECHNICAL DATA *Motorola preferred devices TRIACS Designed for high performance full-wave ac control applications where high 15 AMPERES RMS noise immunity and high commutating di/dt are required. 400 thru 800 • Blocking Voltage to 800 Volts VOLTS • On-State Current Rating of 15 Amperes
SEMICONDUCTOR TECHNICAL DATA Silicon Bidirectional Thyristors .designed primarily for full-wave ac control applications, such as solid-state relays,
SEMICONDUCTOR TECHNICAL DATA Silicon Bidirectional Thyristors .designed primarily for full-wave ac control applications, such as solid-state relays, motor controls, heating controls and power supplies; or wherever full-wave silicon gate controlled solid-state devices are needed. Triac type thyristor
SEMICONDUCTOR TECHNICAL DATA Silicon Bidirectional Triode Thyristors .designed primarily for full-wave ac control applications, such as solid-state relays,
SEMICONDUCTOR TECHNICAL DATA Silicon Bidirectional Triode Thyristors .designed primarily for full-wave ac control applications, such as solid-state relays, motor controls, heating controls and power supplies; or wherever full-wave silicon gate controlled solid-state devices are needed. Triac type th
*Motorola preferred devices Silicon Bidirectional Thyristors TRIACS12 AMPERES RMS
SEMICONDUCTOR TECHNICAL DATA *Motorola preferred devices Silicon Bidirectional Thyristors TRIACS12 AMPERES RMS 400 thru 800 Designed for high performance full–wave ac control applications where high VOLTS noise immunity and commutating di/dt are required. • Blocking Voltage to 800 Volts • On-State C
SEMICONDUCTOR TECHNICAL DATA Silicon Bidirectional Thyristors Designed for use in solid state relays, MPU interface, TTL logic and other light industrial or consumer applications. Supplied in surface mount package for use in
SEMICONDUCTOR TECHNICAL DATA Silicon Bidirectional Thyristors *Motorola preferred devices Designed for use in solid state relays, MPU interface, TTL logic and other light industrial or consumer applications. Supplied in surface mount package for use in automated manufacturing. TRIAC • Sensitive Gate