Download: Order this document SEMICONDUCTOR TECHNICAL DATA by MHPM7A15A60A/D Motorola Preferred Device Integrated Power Stage for 1.0 hp Motor Drives

Order this document SEMICONDUCTOR TECHNICAL DATA by MHPM7A15A60A/D Motorola Preferred Device Integrated Power Stage for 1.0 hp Motor Drives The MHPM7A15A60A module integrates a 3-phase input rectifier bridge, 15 AMP, 600 VOLT 3-phase output inverter, brake transistor/diode, current sense resistor and HYBRID POWER MODULE temperature sensor in a single convenient package.The output inverter utilizes advanced insulated gate bipolar transistors (IGBT) matched with free-wheeling diodes to give optimal dynamic performance. It has been configured for use as a three-phase motor drive module or for man...
Author: Florian Hartmann Shared: 8/19/19
Downloads: 234 Views: 1152

Content

Order this document SEMICONDUCTOR TECHNICAL DATA by MHPM7A15A60A/D Motorola Preferred Device Integrated Power Stage for 1.0 hp Motor Drives

The MHPM7A15A60A module integrates a 3-phase input rectifier bridge, 15 AMP, 600 VOLT 3-phase output inverter, brake transistor/diode, current sense resistor and HYBRID POWER MODULE temperature sensor in a single convenient package.The output inverter utilizes advanced insulated gate bipolar transistors (IGBT) matched with free-wheeling diodes to give optimal dynamic performance. It has been configured for use as a three-phase motor drive module or for many other power switching applications. The top connector pins have been designed for easy interfacing to the user’s control board. • DC Bus Current Sense Resistor Included • Short Circuit Rated 10 µs @ 25°C • Temperature Sensor Included • Pin-to-Baseplate Isolation exceeds 2500 Vac (rms) • Convenient Package Outline • UL Recognized and Designed to Meet VDE • Access to Positive and Negative DC Bus PLASTIC PACKAGE CASE 440-01, Style 1 MAXIMUM DEVICE RATINGS (TJ = 25°C unless otherwise noted) Rating Symbol Value Unit INPUT RECTIFIER BRIDGE Repetitive Peak Reverse Voltage VRRM 600 V Average Output Rectified Current IO 15 A Peak Non-repetitive Surge Current — (1/2 Cycle) (1) IFSM 200 A OUTPUT INVERTER IGBT Reverse Voltage VCES 600 V Gate-Emitter Voltage VGES ± 20 V Continuous IGBT Collector Current IC 15 A Peak IGBT Collector Current — (PW = 1.0 ms) (2) IC(pk) 30 A Continuous Free-Wheeling Diode Current IF 15 A Peak Free-Wheeling Diode Current — (PW = 1.0 ms) (2) IF(pk) 30 A IGBT Power Dissipation PD 55 W Free-Wheeling Diode Power Dissipation PD 30 W IGBT Junction Temperature Range TJ – 40 to +125 °C Free-Wheeling Diode Junction Temperature Range TJ – 40 to +125 °C (1) 1 cycle = 50 or 60 Hz (2) 1.0 ms = 1.0% duty cycle Preferred devices are Motorola recommended choices for future use and best overall value. MMoOtoTroOla,R InOc.L 1A995 MHPM7A15A60A, MAXIMUM DEVICE RATINGS (continued) (TJ = 25°C unless otherwise noted) Rating Symbol Value Unit BRAKE CIRCUIT IGBT Reverse Voltage VCES 600 V Gate-Emitter Voltage VGES ± 20 V Continuous IGBT Collector Current IC 15 A Peak IGBT Collector Current (PW = 1.0 ms) (2) IC(pk) 30 A IGBT Power Dissipation PD 55 W Diode Reverse Voltage VRRM 600 V Continuous Output Diode Current IF 15 A Peak Output Diode Current (PW = 1.0 ms) (2) IF(pk) 30 A TOTAL MODULE Isolation Voltage — (47–63 Hz, 1.0 Minute Duration) VISO 2500 VAC Ambient Operating Temperature Range TA – 40 to + 85 °C Operating Case Temperature Range TC – 40 to + 90 °C Storage Temperature Range Tstg – 40 to +150 °C Mounting Torque — 6.0 lb–in ELECTRICAL CHARACTERISTICS (TJ = 25°C unless otherwise noted) Characteristic Symbol Min Typ Max Unit INPUT RECTIFIER BRIDGE Reverse Leakage Current (VRRM = 600 V) IR — 10 50 µA Forward Voltage (IF = 15 A) VF — 1.05 1.5 V Thermal Resistance (Each Die) RθJC — — 2.9 °C/W OUTPUT INVERTER Gate-Emitter Leakage Current (VCE = 0 V, VGE = ± 20 V) IGES — — ± 20 µA Collector-Emitter Leakage Current (VCE = 600 V, VGE = 0 V) ICES TJ = 25°C — — 200 µA TJ = 125°C — — 2.0 mA Gate-Emitter Threshold Voltage (VCE = VGE, IC = 1.0 mA) VGE(th) 4.0 6.0 8.0 V Collector-Emitter Breakdown Voltage (IC = 10 mA, VGE = 0) V(BR)CES 600 700 — V Collector-Emitter Saturation Voltage (VGE = 15 V, IC = 15 A) VCE(SAT) — 2.7 3.5 V Input Capacitance (VGE = 0 V, VCE = 10 V, f = 1.0 MHz) Cies — 950 — pF Input Gate Charge (VCE = 300 V, IC = 15 A, VGE = 15 V) QT — 75 — nC Fall Time — Inductive Load tfi (VCE = 300 V, IC = 15 A, VGE = 15 V, RG = 150 Ω) — 200 350 ns Turn-On Energy E(on) — — 1.0 mJ (VCE = 300 V, IC = 15 A, VGE = 15 V, RG = 150 Ω) Turn-Off Energy E(off) — — 1.0 mJ (VCE = 300 V, IC = 15 A, VGE = 15 V, RG = 150 Ω) Diode Forward Voltage (IF = 15 A, VGE = 0 V) VF — 1.5 2.0 V Diode Reverse Recovery Time trr (IF = 15 A, V = 400 V, dI/dt = 50 A/µs) — 140 200 ns Diode Stored Charge (IF = 15 A, V = 400 V, di/dt = 50 A/µs) Qrr — — 900 nC Thermal Resistance — IGBT (Each Die) RθJC — — 1.9 °C/W Thermal Resistance — Free-Wheeling Diode (Each Die) RθJC — — 3.7 °C/W (2) 1.0 ms = 1.0% duty cycle MHPM7A15A60A MOTOROLA, ELECTRICAL CHARACTERISTICS (continued) (TJ = 25°C unless otherwise noted) Characteristic Symbol Min Typ Max Unit BRAKE CIRCUIT Gate-Emitter Leakage Current (VCE = 0 V, VGE = ± 20 V) IGES — — ± 20 µA Collector-Emitter Leakage Current (VCE = 600 V, VGE = 0 V) (1) ICES TJ = 25°C — — 200 µA TJ = 125°C — — 2.0 mA Gate-Emitter Threshold Voltage (VCE = VGE, IC = 1.0 mA) VGE(th) 4.0 6.0 8.0 V Collector-Emitter Breakdown Voltage (IC = 10 mA, VGE = 0) V(BR)CES 600 700 — V Collector-Emitter Saturation Voltage (VGE = 15 V, IC = 15 A) (1) VCE(SAT) — 2.7 3.5 V Input Capacitance (VGE = 0 V, VCE = 10 V, f = 1.0 MHz) Cies — 950 — pF Input Gate Charge (VCE = 300 V, IC = 15 A, VGE = 15 V) QT — 75 — nC Fall Time — Inductive Load tfi (VCE = 300 V, IC = 15 A, VGE = 15 V, RG = 150 Ω) — 200 350 ns Turn-On Energy E(on) (VCE = 300 V, IC = 15 A, VGE = 15 V, RG = 150 Ω) — — 1.0 mJ Turn-Off Energy E(off) (VCE = 300 V, IC = 15 A, VGE = 15 V, RG = 150 Ω) — — 1.0 mJ Diode Forward Voltage (IF = 15 A) VF — 1.5 2.0 V Diode Reverse Leakage Current IR — — 50 µA Thermal Resistance — IGBT RθJC — — 1.9 °C/W Thermal Resistance — Diode RθJC — — 3.7 °C/W SENSE RESISTOR Resistance Rsense — 10 — mΩ Resistance Tolerance Rtol –1.0 — +1.0 % TEMPERATURE SENSE DIODE Forward Voltage (@ IF = 1.0 mA) VF — 0.660 — V Forward Voltage Temperature Coefficient (@ IF = 1.0 mA) TCVF — –1.95 — mV/°C (1) 1 cycle = 50 or 60 Hz. MOTOROLA MHPM7A15A60A,

Figure 1. Integrated Power Stage Schematic MHPM7A15A60A MOTOROLA

Q1 Q3 Q5 P1 P217D1 11 D3 13 D59 G1 G3 G5 E1 E3 E5 8 10 12 U 20 24RV19

B

23 S 21 W 18 22 T Q7 Q2 Q4 Q6 15 16 17 14 D2 D4 D6 G7 G2 G4 G6 TEMP SENSE N1 N2 –I +I 256543+TC Q8 DEVICE INTEGRATION 3–Phase 2 –T= PIN NUMBER IDENTIFICATION C 3–Phase Output Brake Input IGBT/Diode IGBT/ Rectifier Bridge, Diode Bridge with Current and Temperature Sense,

VGE

90%

L

I VC CE IC

RG VCE

90% VCE 10% 10% td(off) tf toff

Figure 2. Inductive Switching Time Test Circuit and Timing Chart Typical Characteristics

50 1.0 125°C 25°C D = 0.5 0.2 0.1 P(pk) 20 t1 RθJC(t) = r(t)(RθJC) t R 2θJC = 3.2°C/W 10 D Curves apply for power pulse train shown read time at t1 SINGLE PULSE TJ(pk)–TC = P(pk) RθJC(t) 0 0.01 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 0.01 0.1 1.0 10 100 1000 VF, FORWARD VOLTAGE (V) t, TIME (ms)

Figure 3. Input Bridge Forward Current versus Figure 4. Input Rectifier Bridge Thermal Forward Voltage Response MOTOROLA MHPM7A15A60A

I F, FORWARD CURRENT (A) r(t), EFFECTIVE TRANSIENT THERMAL RESISTANCE (NORMALIZED),

Typical Characteristics

50 50 25°C 125°C 20 V 12 V 10 V 15 V 40 40 30 30 20 208V10 107V00012345046810 VF, FORWARD VOLTAGE (V) VCE, COLLECTOR–EMITTER VOLTAGE (V)

Figure 5. Output Inverter Diode Forward Currrent Figure 6. Output Inverter Collector-Current

versus Forward Voltage versus Collector-Emitter Voltage 20 450 185A10 A 20 A TJ = 25°C 400 IC = 15 A 16 350 100 V 300 V 14 300 200 V 12 250 10 200 8 15064100 4 50200004812 16 20 0 10 20 30 40 50 60 70 80 90 100 VGE, GATE-EMITTER VOLTAGE (V) QG, GATE CHARGE (nC)

Figure 7. Output Inverter Collector-Emitter Figure 8. Gate–to–Emitter Voltage versus Voltage versus Gate-Emitter Voltage Gate Charge

1000 1000 VCE = 300 V VCE = 300 V VGE = 15 V VGE = 15 V RG = 150 Ω IC = 15 A 125°C 25°C 10 25°C 1 10 1 10 100 10 100 1000 IC, COLLECTOR CURRENT (A) RG, GATE RESISTANCE (Ω)

Figure 9. Inverter Switching Energy E(off) versus Figure 10. Inverter Switching Energy E(off) Collector Current IC versus Gate Resistance RG MHPM7A15A60A MOTOROLA

SWITCHING ENERGY ( µ J) VCE , COLLECTOR-EMITTER VOLTAGE (V) I F, FORWARD CURRENT (A) SWITCHING ENERGY ( µ J) VCE, COLLECTOR-EMITTER VOLTAGE (V) IC, COLLECTOR CURRENT (A) VGE , GATE VOLTAGE (V),

Typical Characteristics

1000 1000 VCE = 300 V VCE = 300 V VGE = 15 V VGE = 15 V RG = 150 Ω RG = 150 Ω TJ = 25°C TJ = 125°C 100 100 10 10 tf tf @ 125 td td @ 125 t(off) t(off) @ 12511110 100 1 10 100 IC, COLLECTOR CURRENT (A) IC, COLLECTOR CURRENT (A)

Figure 11. Inverter Switching Time tf, td, t(off) Figure 12. Inverter Switching Time tf, td, t(off)

versus Collector Current IC versus Collector Current IC 1000 1000 VCE = 300 V VGE = 15 V RG = 150 Ω 125°C 100 25°C VCE = 300 V tf VGE = 15 V td IC = 15 A t(off) TJ = 25°C 10 1 10 100 1000 1 10 100 RG, GATE RESISTANCE (Ω) IC, COLLECTOR CURRENT (A)

Figure 13. Inverter Switching Time Figure 14. Inverter Switching Time tr versus

tf, td, t(off) versus Gate Resistance RG Collector Current IC 1000 10000 VCE = 300 V VGE = 15 V Cies IC = 15 A TJ = 25°C 1000 100 Coes

C

10 res1110 100 1000 1 10 100 1000 RG, GATE RESISTANCE (Ω) VCE (V)

Figure 15. Inverter Switching Time tr versus Figure 16. Inverter Capacitance versus VCE Gate Resistance RG MOTOROLA MHPM7A15A60A

SWITCHING TIME (ns) SWITCHING TIME (ns) SWITCHING TIME (ns) CAPACITANCE (pF) SWITCHING TIME (ns) SWITCHING TIME (ns),

Typical Characteristics

1.0 1.0 D = 0.5 D = 0.5 0.2 0.2 0.1 P(pk) 0.1 P(pk) t1 t1 RθJC(t) = r(t)(RθJC) RθJC(t) = r(t)(RθJC)t t RθJC = 2.2°C/W 2 RθJC = 3.4°C/W D Curves apply for power pulse D Curves apply for power pulse train shown read time at t1 train shown read time at tSINGLE PULSE SINGLE PULSE 1TJ(pk)–TC = P(pk) RθJC(t) TJ(pk)–TC = P(pk) RθJC(t) 0.01 0.01 0.01 0.1 1.0 10 100 1000 0.01 0.1 1.0 10 100 1000 t, TIME (ms) t, TIME (ms)

Figure 17. Ouput Inverter IGBT Figure 18. Output Diode Thermal Response Thermal Response

L = 200 µH 5 VGE = 15 V RG = 150Ω0100 200 300 400 500 600 700 800 VCE, COLLECTOR-EMITTER VOLTAGE (V)

Figure 19. Output Inverter Reverse Bias Safe Operating Area (RBSOA) MHPM7A15A60A MOTOROLA

r(t), EFFECTIVE TRANSIENT THERMAL RESISTANCE (NORMALIZED) I C, COLLECTOR CURRENT (A) r(t), EFFECTIVE TRANSIENT THERMAL RESISTANCE (NORMALIZED),

PACKAGE DIMENSIONS E C VK AB AE AA

9 PL

AC AF

3 PL

AD DETAIL Z A Q N AH 2 PL G 2 PL W 1 17

2 PL T

L MSRB

NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 25 18 2. CONTROLLING DIMENSION: MILLIMETER.

Y AG X 3. LEAD LOCATION DIMENSIONS (ie: M, B. AA...)4 PL 4 PL ARE TO THE CENTER OF THE LEAD. P

MILLIMETERS INCHES

U DIM MIN MAX MIN MAX

A 97.54 98.55 3.840 3.880 B 52.45 53.47 2.065 2.105 C 14.60 15.88 0.575 0.625 D 0.43 0.84 0.017 0.033

HJE10.80 12.06 0.425 0.47525 PL

7 PL F 0.94 1.35 0.037 0.053 G 1.60 2.21 0.063 0.087 H 8.58 9.19 0.338 0.362 J 0.30 0.71 0.012 0.028 K 18.80 20.57 0.74 0.81 L 19.30 20.32 0.760 0.800 M 38.99 40.26 1.535 1.585 N 9.78 11.05 0.385 0.435 P 82.55 83.57 3.250 3.290 Q 4.01 4.62 0.158 0.182 R 26.42 27.43 1.040 1.080

D S 12.06 12.95 0.475 0.515

T 4.32 5.33 0.170 0.210

F U 86.36 87.38 3.400 3.440

V 14.22 15.24 0.560 0.600 W 7.62 8.13 0.300 0.320 X 6.55 7.16 0.258 0.282

DETAILZY2.49 3.10 0.098 0.122

AA 2.24 2.84 0.088 0.112 AB 7.32 7.92 0.288 0.312 STYLE 1: AC 4.78 5.38 0.188 0.212 PIN 1. P1 PIN 6. N2 PIN 11. G3 PIN 16. G2 PIN 21. B 2. T– 7. P2 12. K5 17. G4 22. T AD 8.58 9.19 0.338 0.362 3. T+ 8. K1 13. G5 18. W 23. S AE 6.05 6.65 0.238 0.262 4. I+ 9. G1 14. G6 19. V 24. R AF 4.78 5.38 0.188 0.212 5. I– 10. K3 15. G7 20. U 25. N1 AG 69.34 70.36 2.730 2.770 AH ––– 5.08 ––– 0.200

CASE 440-01 ISSUE O MOTOROLA MHPM7A15A60A

, Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters can and do vary in different applications. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. How to reach us: USA / EUROPE: Motorola Literature Distribution; JAPAN: Nippon Motorola Ltd.; Tatsumi–SPD–JLDC, Toshikatsu Otsuki, P.O. Box 20912; Phoenix, Arizona 85036. 1–800–441–2447 6F Seibu–Butsuryu–Center, 3–14–2 Tatsumi Koto–Ku, Tokyo 135, Japan. 03–3521–8315 MFAX: email is hidden – TOUCHTONE (602) 244–6609 HONG KONG: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park, INTERNET: http://Design–NET.com 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852–26629298

MHPM7A15A60A ◊ 2PHX34106L–0 PRINTED IN USA 3/95 IMPERIAL LITHO 12250 4,500 HYBRID POWER MODULE MHPMMO7TAO15RAO6L0A/D

]
15

Similar documents

Order this document SEMICONDUCTOR TECHNICAL DATA by MHPM7A10S120DC3/D Integrated Power Stage for 2.0 hp Motorola Preferred Device 460 VAC Motor Drive
Order this document SEMICONDUCTOR TECHNICAL DATA by MHPM7A10S120DC3/D Integrated Power Stage for 2.0 hp Motorola Preferred Device 460 VAC Motor Drive This module integrates a 3–phase inverter, 3–phase rectifier, brake, and temperature sense in a single convenient package. It is 10 AMP, 1200 VOLT des
Order this document SEMICONDUCTOR TECHNICAL DATA by MHPM7A10E60DC3/D Integrated Power Stage Motorola Preferred Device for 230 VAC Motor Drive
Order this document SEMICONDUCTOR TECHNICAL DATA by MHPM7A10E60DC3/D Integrated Power Stage Motorola Preferred Device for 230 VAC Motor Drive This module integrates a 3–phase inverter, 3–phase rectifier, brake, and temperature sense in a single convenient package. It is 10 AMP, 600 VOLT designed for
Order this document SEMICONDUCTOR TECHNICAL DATA by MHPM6B5A120D/D Integrated Power Stage for 460 VAC Motor Drives
Order this document SEMICONDUCTOR TECHNICAL DATA by MHPM6B5A120D/D Integrated Power Stage Motorola Preferred Devices for 460 VAC Motor Drives These modules integrate a 3–phase inverter in a single convenient package. They are designed for 1.0, 2.0 and 3.0 hp motor drive applications. The inverter 5.
Order this document SEMICONDUCTOR TECHNICAL DATA by MHPM6B20E60D3/D Integrated Power Stage Motorola Preferred Device for 230 VAC Motor Drives
Order this document SEMICONDUCTOR TECHNICAL DATA by MHPM6B20E60D3/D Integrated Power Stage Motorola Preferred Device for 230 VAC Motor Drives This module integrates a 3–phase inverter and 3–phase rectifier in a single convenient package. It is designed for 2.0 hp motor drive 20 AMP, 600 VOLT applica
Order this document SEMICONDUCTOR TECHNICAL DATA by MHPM6B10N120/D Integrated Power Stage for 460 VAC Motor Drives
Order this document SEMICONDUCTOR TECHNICAL DATA by MHPM6B10N120/D Integrated Power Stage for 460 VAC Motor Drives These modules integrate a 3–phase inverter in a single convenient package. They are designed for 2.0, 3.0, and 5.0 hp motor drive applications. The inverter incorporates advanced Motoro
Order this document SEMICONDUCTOR TECHNICAL DATA by MHPM6B15E60D3/D Integrated Power Stage for 230 VAC Motor Drives
Order this document SEMICONDUCTOR TECHNICAL DATA by MHPM6B15E60D3/D Integrated Power Stage for 230 VAC Motor Drives Motorola Preferred Devices These modules integrate a 3–phase inverter and 3–phase rectifier in a single convenient package. They are designed for 0.5, 1.0, and 1.5 hp motor drive appli
Order this document SEMICONDUCTOR TECHNICAL DATA by MHPM6B10A60D/D Motorola Preferred Devices Integrated Power Stage for 230 VAC Motor Drives
Order this document SEMICONDUCTOR TECHNICAL DATA by MHPM6B10A60D/D Motorola Preferred Devices Integrated Power Stage for 230 VAC Motor Drives 10, 20 AMP, 600 V These modules integrate a 3–phase inverter in a single convenient package. HYBRID POWER MODULES They are designed for 1.0 and 2.0 hp motor d
Order this document SEMICONDUCTOR TECHNICAL DATA by MGY40N60/D  N–Channel Enhancement–Mode Silicon Gate
Order this document SEMICONDUCTOR TECHNICAL DATA by MGY40N60/D Motorola Preferred Device N–Channel Enhancement–Mode Silicon Gate This Insulated Gate Bipolar Transistor (IGBT) uses an advanced IGBT IN TO–264 termination scheme to provide an enhanced and reliable high 40 A @ 90°C voltage–blocking cap
Order this document SEMICONDUCTOR TECHNICAL DATA by MGY40N60D/D  N–Channel Enhancement–Mode Silicon Gate IGBT & DIODE IN TO–264
Order this document SEMICONDUCTOR TECHNICAL DATA by MGY40N60D/D Motorola Preferred Device N–Channel Enhancement–Mode Silicon Gate IGBT & DIODE IN TO–264 40 A @ 90°C This Insulated Gate Bipolar Transistor (IGBT) is co–packaged 66 A @ 25°C with a soft recovery ultra–fast rectifier and uses an advance
Order this document SEMICONDUCTOR TECHNICAL DATA by MGY30N60D/D  N–Channel Enhancement–Mode Silicon Gate IGBT & DIODE IN TO–264
Order this document SEMICONDUCTOR TECHNICAL DATA by MGY30N60D/D Motorola Preferred Device N–Channel Enhancement–Mode Silicon Gate IGBT & DIODE IN TO–264 30 A @ 90°C This Insulated Gate Bipolar Transistor (IGBT) is co–packaged 50 A @ 25°C with a soft recovery ultra–fast rectifier and uses an advance
Order this document SEMICONDUCTOR TECHNICAL DATA by MRF1946/D The RF Line
Order this document SEMICONDUCTOR TECHNICAL DATA by MRF1946/D The RF Line .designed for 12.5 volt large–signal power amplifiers in commercial and industrial equipment. • High Common Emitter Power Gain • Specified 12.5 V, 175 MHz Performance 30 W, 136–220 MHz Output Power = 30 Watts RF POWER Power Ga
Order this document The RF MOSFET Line 85 WATTS, 1.0 GHz N–Channel Enhancement–Mode Lateral MOSFET 28 VOLTS
Order this document SEMICONDUCTOR TECHNICAL DATA by MRF185/D The RF MOSFET Line 85 WATTS, 1.0 GHz N–Channel Enhancement–Mode Lateral MOSFET 28 VOLTS LATERAL N–CHANNEL • High Gain, Rugged Device BROADBAND • Broadband Performance from HF to 1 GHz RF POWER MOSFET • Bottom Side Source Eliminates DC Isol
Order this document SEMICONDUCTOR TECHNICAL DATA by MRF184/D The RF MOSFET Line N–Channel Enhancement–Mode Lateral MOSFETs
Order this document SEMICONDUCTOR TECHNICAL DATA by MRF184/D The RF MOSFET Line N–Channel Enhancement–Mode Lateral MOSFETs Designed for broadband commercial and industrial applications at frequen- cies to 1.0 GHz. The high gain and broadband performance of these devices 60 W, 1.0 GHz makes them idea
Order this document SEMICONDUCTOR TECHNICAL DATA by MRF183/D The RF MOSFET Line N–Channel Enhancement–Mode Lateral MOSFETs
Order this document SEMICONDUCTOR TECHNICAL DATA by MRF183/D The RF MOSFET Line N–Channel Enhancement–Mode Lateral MOSFETs Designed for broadband commercial and industrial applications at frequen- cies to 1.0 GHz. The high gain and broadband performance of these devices 45 W, 1.0 GHz makes ithem ide
Order this document SEMICONDUCTOR TECHNICAL DATA by MRF182/D The RF MOSFET Line N–Channel Enhancement–Mode Lateral MOSFETs
Order this document SEMICONDUCTOR TECHNICAL DATA by MRF182/D The RF MOSFET Line N–Channel Enhancement–Mode Lateral MOSFETs • High Gain, Rugged Device • Broadband Performance from HF to 1 GHz 30 W, 1.0 GHz • Bottom Side Source Eliminates DC Isolators, Reducing Common LATERAL N–CHANNEL Mode Inductance
Order this document SEMICONDUCTOR TECHNICAL DATA by MRF177/D The RF MOSFET Line N–Channel Enhancement Mode MOSFET
Order this document SEMICONDUCTOR TECHNICAL DATA by MRF177/D The RF MOSFET Line N–Channel Enhancement Mode MOSFET Designed for broadband commercial and military applications up to 400 MHz 100 W, 28 V, 400 MHz frequency range. Primarily used as a driver or output amplifier in push–pull N–CHANNEL conf
Order this document SEMICONDUCTOR TECHNICAL DATA by MRF176GU/D The RF MOSFET Line N–Channel Enhancement–Mode
Order this document SEMICONDUCTOR TECHNICAL DATA by MRF176GU/D The RF MOSFET Line N–Channel Enhancement–Mode Designed for broadband commercial and military applications using push pull circuits at frequencies to 500 MHz. The high power, high gain and broadband performance of these devices makes poss
Order this document SEMICONDUCTOR TECHNICAL DATA by MRF175LU/D The RF MOSFET Line N–Channel Enhancement–Mode
Order this document SEMICONDUCTOR TECHNICAL DATA by MRF175LU/D The RF MOSFET Line N–Channel Enhancement–Mode Designed for broadband commercial and military applications using single ended circuits at frequencies to 400 MHz. The high power, high gain and broadband performance of each device makes pos
Order this document SEMICONDUCTOR TECHNICAL DATA by MRF175GU/D The RF MOSFET Line N–Channel Enhancement–Mode
Order this document SEMICONDUCTOR TECHNICAL DATA by MRF175GU/D The RF MOSFET Line N–Channel Enhancement–Mode Designed for broadband commercial and military applications using push pull circuits at frequencies to 500 MHz. The high power, high gain and broadband performance of these devices makes poss
Order this document SEMICONDUCTOR TECHNICAL DATA by MRF174/D The RF MOSFET Line N–Channel Enhancement–Mode .designed primarily for wideband large–signal output and driver stages up to
Order this document SEMICONDUCTOR TECHNICAL DATA by MRF174/D The RF MOSFET Line N–Channel Enhancement–Mode .designed primarily for wideband large–signal output and driver stages up to 200 MHz frequency range. • Guaranteed Performance at 150 MHz, 28 Vdc Output Power = 125 Watts Minimum Gain = 9.0 dB
Order this document SEMICONDUCTOR TECHNICAL DATA by MRF173/D The RF MOSFET Line N–Channel Enhancement Mode MOSFETs
Order this document SEMICONDUCTOR TECHNICAL DATA by MRF173/D The RF MOSFET Line N–Channel Enhancement Mode MOSFETs Designed for broadband commercial and military applications up to 200 MHz frequency range. The high–power, high–gain and broadband performance of these devices make possible solid state
Order this document SEMICONDUCTOR TECHNICAL DATA by MRF166W/D N–Channel Enhancement–Mode MOSFET
Order this document SEMICONDUCTOR TECHNICAL DATA by MRF166W/D N–Channel Enhancement–Mode MOSFET Designed primarily for wideband large–signal output and driver stages to 500 MHz. • Push–Pull Configuration Reduces Even Numbered Harmonics • Typical Performance at 400 MHz, 28 Vdc Output Power = 40 Watts
Order this document SEMICONDUCTOR TECHNICAL DATA by MRF166/D The RF MOSFET Line N–Channel Enhancement Mode MOSFETs
Order this document SEMICONDUCTOR TECHNICAL DATA by MRF166/D The RF MOSFET Line N–Channel Enhancement Mode MOSFETs Designed primarily for wideband large–signal output and driver from 30–500 MHz. • Low Crss — 4.5 pF @ VDS = 28 V 20 W, 500 MHz • MRF166C — Typical Performance at 400 MHz, 28 Vdc MOSFET
Order this document SEMICONDUCTOR TECHNICAL DATA by MRF166C/D The RF MOSFET Line N–Channel Enhancement Mode MOSFETs
Order this document SEMICONDUCTOR TECHNICAL DATA by MRF166C/D The RF MOSFET Line N–Channel Enhancement Mode MOSFETs Designed primarily for wideband large–signal output and driver from 30–500 MHz. • Low Crss — 4.5 pF @ VDS = 28 V 20 W, 500 MHz • MRF166C — Typical Performance at 400 MHz, 28 Vdc MOSFET
Order this document SEMICONDUCTOR TECHNICAL DATA by MRF160/D The RF MOSFET Line N–Channel Enhancement–Mode MOSFET
Order this document SEMICONDUCTOR TECHNICAL DATA by MRF160/D The RF MOSFET Line N–Channel Enhancement–Mode MOSFET Designed primarily for wideband large–signal output and driver from 30–500 MHz. • Typical Performance at 400 MHz, 28 Vdc Output Power = 4.0 Watts Gain = 17 dB Efficiency = 50% 4.0 W, to
Order this document SEMICONDUCTOR TECHNICAL DATA by MRF16030/D The RF Line RF Power Transistor
Order this document SEMICONDUCTOR TECHNICAL DATA by MRF16030/D The RF Line RF Power Transistor Designed for 28 Volt microwave large–signal, common base, Class–C CW amplifier applications in the range 1600 – 1640 MHz. • 30 WATTS, 1.6 GHzSpecified 28 Volt, 1.6 GHz Class–C Characteristics RF POWER TRAN
Order this document SEMICONDUCTOR TECHNICAL DATA by MRF16006/D The RF Line RF Power Transistor
Order this document SEMICONDUCTOR TECHNICAL DATA by MRF16006/D The RF Line RF Power Transistor Designed for 28 Volt microwave large–signal, common base, Class–C CW amplifier applications in the range 1600 – 1640 MHz. • 6.0 WATTS, 1.6 GHzSpecified 28 Volt, 1.6 GHz Class–C Characteristics RF POWER TRA
Order this document SEMICONDUCTOR TECHNICAL DATA by MRF158/D The RF TMOS Line N–Channel Enhancement Mode
Order this document SEMICONDUCTOR TECHNICAL DATA by MRF158/D The RF TMOS Line N–Channel Enhancement Mode Designed for wideband large–signal amplifier and oscillator applications to 500 MHz. • Guaranteed 28 Volt, 400 MHz Performance Output Power = 2.0 Watts Minimum Gain = 16 dB 2.0 W, to 500 MHz Effi
Order this document SEMICONDUCTOR TECHNICAL DATA by MRF157/D The RF Power MOS Line N–Channel Enhancement Mode
Order this document SEMICONDUCTOR TECHNICAL DATA by MRF157/D The RF Power MOS Line N–Channel Enhancement Mode Designed primarily for linear large–signal output stages to 80 MHz. • Specified 50 Volts, 30 MHz Characteristics Output Power = 600 Watts Power Gain = 21 dB (Typ) Efficiency = 45% (Typ) 600
Order this document SEMICONDUCTOR TECHNICAL DATA by MRF154/D The RF MOSFET Line N–Channel Enhancement–Mode MOSFET
Order this document SEMICONDUCTOR TECHNICAL DATA by MRF154/D The RF MOSFET Line N–Channel Enhancement–Mode MOSFET Designed primarily for linear large–signal output stages in the 2.0–100 MHz frequency range. • Specified 50 Volts, 30 MHz Characteristics Output Power = 600 Watts Power Gain = 17 dB (Typ