Download: DISCRETE SEMICONDUCTORS DATA SHEET Selection guide Wideband Hybrid Amplifier Modules 1998 Mar 19 File under Discrete Semiconductors, SC16
DISCRETE SEMICONDUCTORS DATA SHEET Selection guide Wideband Hybrid Amplifier Modules 1998 Mar 19 File under Discrete Semiconductors, SC16 TYPE NUMBER POWER GAIN SLOPE FLATNESS RETURN LOSS COMPOSITE (dB) CABLE (dB) (INPUT/OUTPUT) TRIPLE BEAT EQUIVALENT MAX. (dB) (dB) (SL) MIN. MAX. (dB) notes: table 2 notes: table 3 Reverse Amplifier: 5 to 75 MHz Range @ 10 MHz 4 chs BGY68 30 ± 0.8 −0.2 to +0.5 ±0.2 20 −68(3.1) Reverse Amplifier: 5 to 120 MHz Range @ 10 MHz 14 chs BGY66B 25 ± 0.5 −0.2 to +0.5 ±0.2 20 −66(3.2) Reverse Amplifier: 5 to 200 MHz Range @ 10 MHz 22 chs(3.3) BGY61 13.0 ± 0.5 −0.2 to +0...
Author:
Iqbal Shared: 7/30/19
Downloads: 78 Views: 433
Content
DISCRETE SEMICONDUCTORS
DATA SHEET Selection guide Wideband Hybrid Amplifier Modules
1998 Mar 19 File under Discrete Semiconductors, SC16, TYPE NUMBER POWER GAIN SLOPE FLATNESS RETURN LOSS COMPOSITE (dB) CABLE (dB) (INPUT/OUTPUT) TRIPLE BEAT EQUIVALENT MAX. (dB) (dB) (SL) MIN. MAX. (dB) notes: table 2 notes: table 3 Reverse Amplifier: 5 to 75 MHz Range @ 10 MHz 4 chs BGY68 30 ± 0.8 −0.2 to +0.5 ±0.2 20 −68(3.1) Reverse Amplifier: 5 to 120 MHz Range @ 10 MHz 14 chs BGY66B 25 ± 0.5 −0.2 to +0.5 ±0.2 20 −66(3.2) Reverse Amplifier: 5 to 200 MHz Range @ 10 MHz 22 chs(3.3) BGY61 13.0 ± 0.5 −0.2 to +0.5 ±0.2 20 −68 BGY65 18.5 ± 0.5 −0.2 to +0.5 ±0.2 20 −68 BGY67 22.0 ± 0.5 −0.2 to +0.5 ±0.2 20 −67 BGY67A 24.0 ± 0.5 −0.2 to +0.5 ±0.2 20 −67 Optical Receiver: 5 to 300 MHz Range (2.1) BGY67BO(1.2) − − ±0.3 15 − BGY67BO/4M − − ±0.3 14 − (1.2)(1.1)(1.8) BGY67BO/SC − − ±0.3 15 − (1.2)(1.9) Forward Amplifier: 40 to 450 MHz Range BGY82, BGY84, BGY85, BGY84A, BGY85A, BGY86, BGY87, BGY87B, BGY88, BGY89; for more information see corresponding data sheets in this handbook. 1998 Mar 19 2, TYPE NUMBER CROSS COMPOSITE 2nd OUTPUT NOISE FIGURE TOTAL DC MODUL- 2nd ORDER ORDER VOLTAGE (dB) CURRENT ATION BEAT BEAT (dBmV) MAX. CONSUMPTION (dB) (dB) (dB) MIN. (mA) MAX. MAX. MAX. notes: MAX. notes: notes: notes: table 7 table 4 table 5 table 6 Reverse Amplifier: 5 to 75 MHz Range 4 chs @ 75 MHz BGY68 −60(4.1) − −70(6.1) − 5.0 135 Reverse Amplifier: 5 to 120 MHz Range 14 chs @ 120 MHz BGY66B −54(4.2) − −70(6.2) 60.0(7.1) 5.0 135 Reverse Amplifier: 5 to 200 MHz Range 22 chs(4.3) (6.3) (7.2) (7.3) @ 200 MHz BGY61 −61 − −72 67.0 64.0 7.0 230 BGY65 −61 − −72 67.0 64.0 5.5 230 BGY67 −60 − −67 67.0 64.0 5.5 230 BGY67A −59 − −67 67.0 64.0 5.5 230 Optical Receiver: 5 to 300 MHz Range (6.4) BGY67BO(1.2) − − −70 − − 190 BGY67BO/4M − − −70 − − 190 (1.2)(1.1)(1.8) BGY67BO/SC − − −70 − − 190 (1.2)(1.9) Forward Amplifier: 40 to 450 MHz Range BGY82, BGY84, BGY85, BGY84A, BGY85A, BGY86, BGY87, BGY87B, BGY88, BGY89; for more information see corresponding data sheets in this handbook. 1998 Mar 19 3, TYPE NUMBER POWER GAIN SLOPE FLATNESS RETURN LOSS COMPOSITE (dB) CABLE (dB) (INPUT/OUTPUT) TRIPLE BEAT EQUIVALENT MAX. (dB) (dB) (SL) MIN. MAX. (dB) notes: table 2 notes: table 3 Power Doublers BGD102, BGD104, BGD108; for more information see corresponding data sheets in this handbook. Forward Amplifier: 40 to 550 MHz Range @ 50 MHz @ 550 MHz (2.2) 77 chs(3.6) BGY580 12.5 ± 0.5 12.5 to 14.5 0.5 to 2.0 ±0.2 18 −52 BGY583 14.0 ± 0.5 >14.5 0.2 to 1.5 ±0.2 18 −59 BGY584 17.0 ± 0.5 17.6 to 19.0 0.5 to 2.0 ±0.2 18 −56 BGY585 17.0 ± 0.5 17.6 to 19.0 0.5 to 2.0 ±0.2 18 −59 BGY584A 18.2 ± 0.5 18.8 to 20.0 0.5 to 2.0 ±0.2 18 −56 BGY585A 18.2 ± 0.5 18.8 to 20.0 0.5 to 2.0 ±0.2 18 −59 BGY586 22.0 ± 0.5 22.0 to 24.0 0.2 to 1.5 ±0.2 18 −53 BGY587 22.0 ± 0.5 22.0 to 24.0 0.2 to 1.5 ±0.2 18 −57 BGY587B 27.0 ± 0.8 >27.5 0.5 to 2.5 ±0.4 18 −57 BGY588 34.5 ± 1.0 35.0 to 37.0 0 to 2.5 ±0.4 18 −57 Power Doublers BGD502 18.5 ± 0.5 18.8 to 20.8 0.2 to 2.2 ±0.3 18 −65 BGD504 20.0 ± 0.5 20.2 to 22.2 0.2 to 2.2 ±0.3 18 −64 BGD506 22.0 ± 0.5 >22.1 0 to 2.0 ±0.3 18 −62 BGD508 36.0 ± 1.0 >36.5 0.2 to 2.2 ±0.4 18 −62 Forward Amplifier: 40 to 600 MHz Range @ 50 MHz @ 600 MHz (2.2) 85 chs(3.7) BGY681 12.5 ± 0.5 >12.7 0.7 to 2.2 ±0.2 18 −52 BGY683 14.0 ± 0.5 >14.5 0.2 to 1.7 ±0.2 18 −55 BGY685A 18.2 ± 0.5 >19.0 0.5 to 2.2 ±0.2 18 −55 BGY685AD 18.5 ± 0.5 >19.0 0.2 to 2.2 ±0.3 18 −62 BGY685AL 18.5 ± 0.5 >18.5 0.5 to 2.0 ±0.3 18 −56 BGY687 21.5 ± 0.5 >22.0 0.8 to 2.2 ±0.2 18/16 −54 BGY687B 27.0 ± 0.8 >27.8 0.8 to 2.8 ±0.4 18 −53 1998 Mar 19 4, TYPE NUMBER CROSS COMPOSITE 2nd OUTPUT NOISE FIGURE TOTAL DC MODUL- 2nd ORDER ORDER VOLTAGE (dB) CURRENT ATION BEAT BEAT (dBmV) MAX. CONSUMPTION (dB) (dB) (dB) MIN. (mA) MAX. MAX. MAX. notes: MAX. notes: notes: notes: table 7 table 4 table 5 table 6 Power Doublers BGD102, BGD104, BGD108; for more information see corresponding data sheets in this handbook. Forward Amplifier: 40 to 550 MHz Range 77 chs(4.6) 77 chs(5.3) (6.7) (7.5) @ 550 MHz BGY580 −59 −56 −70 59.0 8.5 200 BGY583 −61 −59 −72 61.5 8.5 240 BGY584 −59 −56 −68 58.5 7.0 200 BGY585 −62 −59 −70 61.0 8.0 240 BGY584A −59 −55 −70 59.0 7.0 200 BGY585A −62 −59 −72 61.5 8.0 240 BGY586 −55 −50 −62 58.5 6.5 200 BGY587 −58 −54 −66 61.0 7.0 240 BGY587B −60 −57 −68 61.0 6.5 340 BGY588 −59 −57 −68 61.0 6.5 340 Power Doublers BGD502 −68 −62 −72 64.0 8.0 435 BGD504 −67 −60 −70 63.5 8.0 435 BGD506 −63 −55 −66 62.5 7.0 435 BGD508 −65 −60 −70 63.0 7.5 625 Forward Amplifier: 40 to 600 MHz Range 85 chs(4.6) 85 chs(5.4) (6.8) (7.6) @ 600 MHz BGY681 −58 −57 −70 59.5 9.5 240 BGY683 −59 −57 −68 58.0 9.0 240 BGY685A −60 −56 −70 60.0 8.5 240 BGY685AD −60 −60 −70 62.0 6.0 250 BGY685AL −55 −56 −70 60.0 5.0 250 BGY687 −54 −52 −66 58.0 6.5 240 BGY687B −58 −54 −66 60.0 7.0 340 1998 Mar 19 5, TYPE NUMBER POWER GAIN SLOPE FLATNESS RETURN LOSS COMPOSITE (dB) CABLE (dB) (INPUT/OUTPUT) TRIPLE BEAT EQUIVALENT MAX. (dB) (dB) (SL) MIN. MAX. (dB) notes: table 2 notes: table 3 Power Doublers BGD601 12.5 ± 0.5 >12.7 0.2 to 2.2 ±0.3 18 −62 BGD602 18.5 ± 0.5 >19.0 0.2 to 2.2 ±0.3 18 −62 BGD602D 18.0 ± 0.5 >18.5 0.2 to 2.2 ±0.3 18 −68 Forward Amplifier: 40 to 750 MHz Range @ 50 MHz @ 750 MHz (2.3) 110 chs(3.8) BGY785A 18.5 ± 0.5 >18.5 0 to 2.0 ±0.3 20 −53 BGY785AD 18.5 ± 0.5 >18.5 0.2 to 2.0 ±0.5 20 −58 BGY785AD/8M(1.7) 18.5 ± 0.5 − 0.2 to 2.0 ±0.5 20 −58 BGY787 21.5 ± 0.5 >22.0 0 to 1.5 ±0.5 20 −53 BGY788 34.0 ± 0.5 >34 0.5 to 2.5 ±0.5 20 −49 Power Doublers BGD702/702MI(1.4) 18.5 ± 0.5 >18.5 0 to 1.5 ±0.5 20(2.4) −58 BGD702D 18.5 ± 0.5 >20.0 2.0 to 4.0 ±0.5 20(2.3) −62 BGD702N 18.5 ± 0.5 >18.5 0.2 to 2.0 ±0.25 20(2.4) −58 BGD704 20.0 ± 0.5 >20.0 0 to 2.0 ±0.5 20(2.4) −57 BGD704N 20.0 ± 0.5 >20.0 0 to 2.0 ±0.25 20(2.4) −57 Forward Amplifier: 40 to 860 MHz Range @ @ (2.3) 49 chs(3.9) 50 MHz 860 MHz BGY883 15.0 ± 0.5 >15.0 0 to 2.0 ±0.3 20 −61 BGY885A 18.5 ± 0.5 − 0 to 2.0 ±0.3 20 −61 BGY885B 20.0 ± 0.5 >20.0 0 to 2.0 ±0.3 20 −60 BGY887 21.5 ± 0.5 >21.5 0.2 to 2.0 ±0.3 20 −62 BGY887B 29.0 ± 0.5 >29.0 0.5 to 2.5 ±0.5 20 −60 BGY888 34.0 ± 0.5 >34.0 0.5 to 2.5 ±0.5 20 −60 1998 Mar 19 6, TYPE NUMBER CROSS COMPOSITE 2nd OUTPUT NOISE FIGURE TOTAL DC MODUL- 2nd ORDER ORDER VOLTAGE (dB) CURRENT ATION BEAT BEAT (dBmV) MAX. CONSUMPTION (dB) (dB) (dB) MIN. (mA) MAX. MAX. MAX. notes: table 7 MAX. notes: notes: notes: table 4 table 5 table 6 Power Doublers BGD601 −66 −60 −70 63.0 9.5 435 BGD602 −66 −60 −70 63.0 8.0 435 BGD602D −61 −64 −76 66.0 7.0 440 Forward Amplifier: 40 to 750 MHz Range 110 chs(4.6) 110 chs(5.5) (6.9) (7.7) @ 750 MHz BGY785A −56 −53 −65 59.0 7.0 240 BGY785AD −56 −58 −68 61.0 6.0 265 BGY785AD/8M(1.7) −56 −58 −68 61.0 6.0 265 BGY787 −52 −53 −63 61.0 6.5 240 BGY788 −51 −52 −64 58.0 7.0 320 Power Doublers BGD702/702MI(1.4) −62 −58 −68 61.0 8.5 435 BGD702D −59 −62 −72 64.0 7.0 435 BGD702N −62 −58 −68 61.0 8.5 435 BGD704 −61 −56 −66 60.5 8.5 435 BGD704N −61 −56 −66 60.5 8.5 435 Forward Amplifier: 40 to 860 MHz Range 49 chs(4.6) 49 chs(5.6) (6.10) (7.9) @ 860 MHz BGY883 −61 −61 −68 60.0 typ. 8.5 235 BGY885A −61 −61 −70 59.0 typ. 8.0 240 BGY885B −60 −60 −68 59.0 typ. 7.5 235 BGY887 −61 −61 −70 59.0 6.5 235 BGY887B −60 −60 −70 58.5 6.5 340 BGY888 −59 −55 −65 58.0 7.0 340 1998 Mar 19 7, TYPE NUMBER POWER GAIN SLOPE FLATNESS RETURN LOSS COMPOSITE (dB) CABLE (dB) (INPUT/OUTPUT) TRIPLE BEAT EQUIVALENT MAX. (dB) (dB) (SL) MIN. MAX. (dB) notes: table 2 notes: table 3 Cascade Amplifiers (2.5) BGE884 17.0 ± 0.5 0.2 to 1.4 ±0.3 20 − BGE885 17.0 ± 0.5 0.2 to 1.2 ±0.5 14(2.6) − BGX881 12.5 ± 0.5 0.2 to 1.2 ±0.3 20 − BGX885N 17.0 ± 0.5 0.2 to 1.4 ±0.3 20 − Power Doublers 129 chs(3.9) BGD802/802MI(1.4) 18.5 ± 0.5 >18.5 0.2 to 2.0 ±0.5 20(2.3) −54 BGD802N 18.5 ± 0.5 >18.5 0.2 to 2.0 ±0.25 20(2.3) −54 BGD804 20.0 ± 0.5 >20.0 0.2 to 2.0 ±0.5 20(2.3) −53 BGD804N 20.0 ± 0.5 >20.0 0.2 to 2.0 ±0.25 20 −53 BGD885(1.5) 17.0 ± 0.5 − 0.2 to 1.6 ±0.5 20 − Optical Receiver BGE887BO(1.2) − − ±0.5 11(2.8) − BGY847BO(1.2) − − ±0.5 11(2.1) − BGY887BO(1.2) − − ±0.5 11(2.1) − BGY887BO/FC − − ±0.5 11(2.1) − (1.2)(1.6) BGY887BO/SC − − ±0.5 11(2.1) − (1.2)(1.9) Power Doubler: 40 to 900 MHz Range @ @ (2.3) 129 chs(3.9) 50 MHz 900 MHz BGD902(1.1) 18.5 ± 0.5 20.0 ± 0.5 1.0 to 2.0 ±0.3 20 −58 Forward Amplifier: 40 to 1000 MHz Range @ @ (2.7) 110/150 50 MHz 1 GHz chs(3.10) BGY1085A 18.5 ± 0.5 >18.5 0 to 2.0 ±0.3 20 −53/−53 typ. 1998 Mar 19 8, TYPE NUMBER CROSS COMPOSITE 2nd OUTPUT NOISE FIGURE TOTAL DC MODUL- 2nd ORDER ORDER VOLTAGE (dB) CURRENT ATION BEAT BEAT (dBmV) MAX. CONSUMPTION (dB) (dB) (dB) MIN. (mA) MAX. MAX. MAX. notes: table 7 MAX. notes: notes: notes: table 4 table 5 table 6 Cascade Amplifiers (6.11) (7.8) (7.9) @ @ 350 MHz 860 MHz BGE884 − − −60(6.12) 55.0 55.0 7.5 8.0 150 BGE885 − − −53 − 59.0 7.5 8.0 240 BGX881 − − −53 60.5 59.5 8.5 9.0 240 BGX885N − − −53 61.0 60.0 7.5 8.0 240 Power Doublers 129 chs(4.6) 129 chs(5.6) BGD802/802MI(1.4) −59 −56 −69(6.10) − 61.5 − 9.0 410 BGD802N −59 −56 −69 61.5 61.5 − − 410 BGD804 −61 −54 −67(6.10) − 60.0 − 7.5 410 BGD804N −58 −54 −67 61.0 61.0 − − 410 BGD885(1.5) − − −53 64.0 63.0 − 8.0 450 Optical Receiver BGE887BO(1.2) − − −70(6.4) − − 205 BGY847BO(1.2) − − −70(6.4) − − 205 BGY887BO(1.2) − − −70(6.4) − − 205 BGY887BO/FC − − −70(6.4) − − 205 (1.2)(1.6) BGY887BO/SC − − −70(6.4) − − 205 (1.2)(1.9) Power Doubler: 40 to 900 MHz Range 129 chs(4.6) 129 chs(5.6) (6.10) (7.9) @ @ 50 MHz 900 MHz BGD902(1.1) −60 −58 −70 63.0 5.0 8.0 435 Forward Amplifier: 40 to 1000 MHz Range 110/150 110/150 (6.13) (7.10) (7.11) @ @ chs(4.7) chs(5.7) 750 MHz 1 GHz BGY1085A −54/−54 typ. −56/−56 typ. −65/−68 60.0 59.0 7.0 7.5 typ. 240 typ. 1998 Mar 19 9, NOTES IN SELECTION GUIDE Table 1 Miscellaneous notes. Table 2 Return loss notes. NOTE IN NOTE IN MAIN TABLE RETURN LOSSMAIN TABLE 1.1 provisional data/advance information 2.1 value listed is output return loss. 1.2 module has a monomode optical input Optical input return loss: >40 dB for wavelengths from 2.2 >20 dB from 40 to 80 MHz 1290 to 1600 nm; >19 dB from 80 to 160 MHz PIN diode current-monitoring terminal; >18 dB from 160 to 450 MHz, 550 MHz 1 meter SM pigtail, 9/125 µm or 600 MHz as appropriate spectral sensitivity: 2.3 >20 dB from 40 to 80 MHz >0.85 A/W at 1310 nm, >18.5 dB from 80 to 160 MHz >0.9 A/W at 1550 nm. >17 dB from 160 to 320 MHz 1.4 the MI type has ‘mirror image’ pinning >15.5 dB from 320 to 640 MHz for simplified board layout when put in >14 dB from 640 to 750 MHz, 860 MHz parallel with the standard type. or 900 MHz as appropriate 1.5 cascade 2.4 >20 dB from 40 to 80 MHz 1.6 as BO but with the pigtail terminated by >19 dB from 80 to 160 MHz an FC/APC optical connector >18 dB from 160 to 320 MHz 1.7 frequency range 40 to 870 MHz >17 dB from 320 to 640 MHz >16 dB from 640 to 750 MHz 1.8 frequency range 40 to 400 MHz 2.5 measured at 40 MHz, max. decrease 1.9 as BO but with the pigtail terminated by 1.5 dB/octave up to 800 MHz; an SC/APC optical connector from 800 to 860 MHz, return loss is >10 dB 2.6 >14 dB from 40 to 450 MHz Table 3 Measuring conditions for composite triple beat. >10 dB from 450 to 860 MHz NOTE IN MEASURED AT VO 2.7 measured at 40 MHz, MAIN TABLE (MHz) (dBmV) max. decrease 1.5 dB/octave 3.1 25 50 2.8 value listed is output return loss. Optical input return loss: >45 dB 3.2 67.25 48 3.3 175.25 (channel 7) 50 3.4 445.25 (channel H22) 46 3.5 433.25 (channel H20) 46; 36 channels 3.6 547.25 (channel 27) 44 3.7 595.25 (channel 35) 44 3.8 745.25 44 3.9 859.25 44 3.10 1st value; 44 745.25 MHz 2nd value; 40 985.25 MHz 1998 Mar 19 10, Table 4 Measuring conditions for cross modulation. Table 5 Measuring conditions for composite second-order beat. NOTE IN MEASURED AT VO NOTE IN MEASURED AT VO MAIN TABLE (MHz) (dBmV) MAIN TABLE (MHz) (dBmV) 4.1 25 50 5.1 25 50 4.2 67.25 48 5.2 446.25 46 4.3 55.25 (channel 2) 50 (channel H22) 4.4 55.25 (channel 2) 46 5.3 548.5 44 (channel 27) 4.5 55.25 (channel 2) 46; 36 channels 5.4 596.5 (channel 35) 44 4.6 55.25 (channel 2) 44 5.5 746.5 44 (channel 2) 4.7 1st value; 55.25 44 (channel 2) 5.6 860.5 44 for 110 channels; 5.7 1st value; 44 750 MHz b/w 746.5 MHz 2nd value; 55.25 40 2nd value; 40 (channel 2) 986.5 MHz for 150 channels; 1000 MHz b/w Table 6 Measuring conditions for 2nd order beat measured at fp+q. NOTE IN fp fq f (1)p+q VO MAIN TABLE (MHz) (MHz) (MHz) (dBmV) 6.1 19 31 50 50 6.2 55.25 61.25 116.5 48 6.3 83.25 109.25 192.5 50 6.4 −70 dBc; 2 laser test (each laser: 0.5 mW; 40% modulation index) 6.5 55.25 (channel 2) 343.25 (channel H5) 398.5 46 (channel H14) 6.6 55.25 (channel 2) 391.25 (channel H13) 446.5 46 (channel H22) 6.7 55.25 (channel 2) 493.25 (channel 18) 548.5 (channel 27) 44 6.8 55.25 (channel 2) 541.25 596.5 44 6.9 55.25 (channel 2) 691.25 746.5 44 6.10 55.25 (channel 2) 805.25 860.5 44 6.11 349.25 403.25 752.5 59 6.12 349.25 403.25 752.5 44 6.13 1st value; 55.25 (channel 2) 691.25 746.25 44 2nd value; 55.25 (channel 2) 931.25 986.25 40 Note 1. Vo = Vp = Vq. 1998 Mar 19 11, Table 7 Measuring conditions for output voltage(1). General Remarks NOTE IN fp fq fr fp+q−r • All devices are cascode types except where indicated MAIN TABLE (MHz) (MHz) (MHz) (MHz) otherwise 7.1 111.25 118.25 120.25 109.25 • Source and load impedance of all devices is 75 Ω 7.2 35.25 42.25 44.25 33.25 • Characteristics specified at Tmb = 30 °C and measured 7.3 187.25 194.25 196.25 185.25 at 24 V DC supply 7.4 440.25 447.25 449.25 438.25 • Cross modulation and beats are flat-channel measurements, that is, measured with all channel 7.5 540.25 547.25 549.25 538.25 outputs at the specified Vo. 7.6 590.25 597.25 599.25 588.25 7.7 740.25 747.25 749.25 738.25 7.8 341.25 348.25 350.25 339.25 7.9 851.25 858.25 860.25 849.25 7.10 740.25 747.25 749.25 738.25 7.11 980.25 987.25 989.25 978.25 Note 1. All output voltages measured at fp + q −r, and for an intermodulation distortion of −60 dB (DIN 45004B, par. 6.3: 3 tone); Vp = Vo, Vq = Vo − 6 dB, Vr = Vo − 6 dB. CROSS-REFERENCE GUIDE FOR WIDEBAND HYBRID AMPLIFIER MODULES GAIN FREQUENCY PHILIPS MOTOROLA Forward Amplifiers 450 MHz BGY80 MHW5122A BGY81 MHW5122A 12 dB 550 MHz BGY580 MHW6122 BGY581 MHW6122 600 MHz BGY681 450 MHz BGY82 MHW5142A BGY83 MHW5142A 550 MHz BGY582 MHW6142 14 dB BGY583 MHW6142 600 MHz BGY683 860 MHz BGY883 MHW8142 450 MHz BGY84 MHW5172A BGY85 MHW5172A 17 dB 550 MHz BGY584 MHW6172 BGY585 MHW6172 600 MHz BGY685 1998 Mar 19 12, GAIN FREQUENCY PHILIPS MOTOROLA Forward Amplifiers (continued) 17 dB High slope 450 MHz BGY85H/01 450 MHz BGY84A MHW5183 BGY85A MHW5182A 550 MHz BGY584A MHW6182 BGY585A MHW6182 600 MHz BGY685A MHW6182-6 18 dB BGY685AD BGY685AL MHW6183 750 MHz BGY785A MHW7182 BGY785AD 860 MHz BGY885A MHW8182 1000 MHz BGY1085A MHW9182 20 dB 860 MHz BGY885B 450 MHz BGY86 BGY87 MHW5222A 550 MHz BGY586 22 dB BGY587 MHW6222 600 MHz BGY687 MHW6222-6 750 MHz BGY787 MHW7222 860 MHz BGY887 MHW8222 450 MHz BGY87B MHW5272A 550 MHz BGY587B MHW6272 27 dB to 29 dB 600 MHz BGY687B 860 MHz BGY887B MHW8292 450 MHz BGY88 MHW5342A 550 MHz BGY588 MHW6342 34 dB 750 MHz BGE788 860 MHz BGY888 36 dB 450 MHz BGY89 MHW5382A Reverse Amplifiers 13 dB 5 to 200 MHz BGY61 MHW1134 18 dB 5 to 200 MHz BGY65 MHW1184 22 dB 5 to 200 MHz BGY67 MHW1224 24 dB 5 to 200 MHz BGY67A MHW1244 25 dB 5 to 120 MHz BGY66B 30 dB 5 to 75 MHz BGY68 1998 Mar 19 13, GAIN FREQUENCY PHILIPS MOTOROLA Power Doublers 12 dB 600 MHz BGD601 17 dB 860 MHz BGD885 CA922A 450 MHz BGD102 MHW5185B 550 MHz BGD502 MHW6185B 600 MHz BGD602 18 dB BGD602D 750 MHz BGD702 MHW7185A BGD702D 860 MHz BGD802 MHW8185 450 MHz BGD104 MHW5205 550 MHz BGD504 MHW6205 20 dB 750 MHz BGD704 MHW7205A 860 MHz BGD804 900 MHz BGD902 22 dB 450 MHz BGD106 MHW5225 550 MHz BGD506 MHW6225 36 dB 450 MHz BGD108 550 MHz BGD508 Optical Receivers − 860 MHz BGE887BO − BGY847BO − BGY887BO − 300 MHz BGY67BO Cascade Amplifiers 12 dB 860 MHz BGX881 BGE884 17 dB 860 MHz BGE885 BGE885N CA901 24 dB 860 MHz BGE887 1998 Mar 19 14]15
Similar documents

INTEGRATED CIRCUITS DATA SHEET Assigned I2C-bus addresses General 1997 Mar 03 File under Integrated Circuits, IC12 ASSIGNED I2C-BUS ADDRESSES (IN ALPHANUMERIC ORDER OF TYPE NUMBER) I2TYPE C SLAVE ADDRESSES DESCRIPTION NUMBER A6 A5 A4 A3 A2 A1 A0 - General call address0000000- Reserved addresses0000X

APPLICATION NOTE Wideband class-A power amplifier for TV transposers in band I (50 − 80 MHz) with two transistors BLV33 NCO8207 CONTENTS 1 SUMMARY 2 EXPECTED PERFORMANCE 3 PARTS LIST 1998 Mar 2321SUMMARY The transistor BLV33 is primarily intended for use in linear VHF amplifiers for television trans

INTEGRATED CIRCUITS DATA SHEET TDA6800 TDA6800T Video modulator circuit Product specification March 1986 File under Integrated Circuits, IC02 GENERAL DESCRIPTION The TDA6800 is a modulator circuit for modulation of video signals on a VHF/UHF carrier. The circuit requiresa5Vpower supply and few exter

APPLICATION NOTE The BLF246 as an H.F.-S.S.B. amplifier NCO8801 CONTENTS 1 SUMMARY 2 INTRODUCTION 3 NARROW BAND TEST AT 28 MHz 4 WIDEBAND OPERATION 5 ACKNOWLEDGEMENT 1998 Mar 2321SUMMARY This report gives information on the BLF246 as a linear amplifier at 28 MHz for S.S.B. signals. Typically the dev

INTEGRATED CIRCUITS DATA SHEET TDA8725T Antenna signal processor Product specification 1995 Mar 21 File under Integrated Circuits, IC02 Philips Semiconductors FEATURES For PIP applications, the antenna input signal is split and fed to the main TV tuner and the PIP tuner. Good signal • 75 Ω antenna i

Drain-supply-switching of Mobile Phone Power Amps with Pulsed Operation Mode Switching the supply voltage to the drain of a GaAs device is required in many circuits in order to maximise standby times and enable reliable battery charging. Three different concepts for the pulsed switching of the drain

Order this document by MC3359/D .includes oscillator, mixer, limiting amplifier, AFC, quadrature discriminator, op/amp, squelch, scan control, and mute switch. The MC3359 HIGH GAIN is designed to detect narrowband FM signals using a 455 kHz ceramic filter for use in FM dual conversion communications

SIEGET®25 Low Noise Amplifier with BFP 420 Transistor at 2.4 GHz The SIEMENS Grounded Emitter Transistor Line is a completely new generation of silicon bipolar junction RF-transistors. This application note describes a low-noise amplifier with the following characteristics: Gain: 13.6 dB Noise Figur

PRODUCT INFORMATION APPLICATIONS: RF Components ® • Group 900 MHz ISM band phones • RY3-Series 1.8 GHz DECT phones• Point of sale terminals Transceivers for Analog Cordless STANDARD PACKAGE Telephones FEATURES • PLL programmable • Fully duplexed mode • Compatible with European CT1, CT1+ and DECT spe

Order this document by MC3362/D .includes dual FM conversion with oscillators, mixers, quadrature discriminator, and meter drive/carrier detect circuitry. The MC3362 also has LOW–POWER buffered first and second local oscillator outputs and a comparator circuit for FSK detection. DUAL CONVERSION • Co

Order this document SEMICONDUCTOR TECHNICAL DATA by AN1235/D Prepared by: Onis Cogburn INTRODUCTION (NCI) was created to provided an organization to produce captions and promote the service. In 1980 the closed cap- Designed primarily for the hearing impaired, closed cap- tioning for the hearing impa

Order this document by MC3371/D LOW POWER The MC3371 and MC3372 perform single conversion FM reception and consist of an oscillator, mixer, limiting IF amplifier, quadrature discriminator, FM IF active filter, squelch switch, and meter drive circuitry. These devices are designed for use in FM dual c

CXA3050M NICAM and SMATV RF MODULATOR/PLL Description Fully synthesized I2C controlled UHF/VHF TV RF 24 pin SOP (Plastic) Modulator compatible with PAL and NTSC video formats. Features • Minimal adjustment of external components • For use on VHF and UHF TV Frequencies • Video RF carrier frequency pr

INTEGRATED CIRCUITS DATA SHEET TDA8822 Universal I2C-bus programmable RF modulator Preliminary specification 1997 Jan 08 File under Integrated Circuits, IC02 FEATURES • 5 V power supply • Video amplifier with clamp and white clip circuits • Programmable video modulation depth • FM sound modulator (4

Order this document by MC3363/D The MC3363 is a single chip narrowband VHF FM radio receiver. It is a dual conversion receiver with RF amplifier transistor, oscillators, mixers, LOW POWER quadrature detector, meter drive/carrier detect and mute circuitry. The MC3363 also has a buffered first local o

Communication ICs FM IF detector for cordless phones BA4116FV The BA4116FV is an IC with mixing circuit, IF circuit, FM detector circuit, RSSI circuit, and noise detector circuit. As it can operate at low voltages, it is ideal for use in cordless phones. Applications Cordless phones, amateur short w

Order this document by MC1374/D The MC1374 includes an FM audio modulator, sound carrier oscillator, RF oscillator, and RF dual input modulator. It is designed to generate a TV signal from audio and video inputs. The MC1374’s wide dynamic range and low TV MODULATOR CIRCUIT distortion audio make it p

Audio ICs AM radio / FM IF stereo system IC BA1450S The BA1450S is a tuner system IC for electronic tuning for AM radios, FM IF, and MPX. It has been developed for Hi-Fi component applications. The MPX VCO circuit requires no adjustment, which will enable a reduction in the number of production line

CXA3219M UHF-Band RF Modulator for VCR Description The CXA3219M is a UHF-band RF modulator which 16 pin SOP (Plastic) converts the frequency of audio and video signals. Some circuits which comprise this IC are a UHF oscillator video clamp, white clip, video modulator, audio FM modulator and an inter

Communication ICs Second Mixer IF for digital cellular phones BH4128FV The BH4128FV is an IC equipped with internal second mixer and IF amplifier circuits, developed for use with digital cellu- lar phones. Applications Digital cellular phones Features 1) Equipped with internal mixer, IF, and RSSI ci

Audio ICs FM / TV front end BA4424N The BA4424N is a monolithic IC designed for FM front end use. It consists of an RF amplifier circuit, mixer circuit, local oscillation circuit, IF buffer amplifier, and a variable capacitor-diode for AFC. Features 1) An RF amplifier, mixer, local oscillator, IF bu