Download: HP OmniBook Plug-In Modules User’s Guide

HP OmniBook Plug-In Modules User’s Guide 1-1 Notice This manual and any examples contained herein are provided “as is” and are subject to change without notice. Hewlett-Packard Company makes no warranty of any kind with regard to this manual, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Hewlett-Packard Co. shall not be liable for any errors or for incidental or consequential damages in connection with the furnishing, performance, or use of this manual or the examples herein. Consumer transactions in Australia and the United King...
Author: Anonymous
Downloads: 0 Views: 0

Content

HP OmniBook Plug-In Modules User’s Guide 1-1,

Notice

This manual and any examples contained herein are provided “as is” and are subject to change without notice. Hewlett-Packard Company makes no warranty of any kind with regard to this manual, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Hewlett-Packard Co. shall not be liable for any errors or for incidental or consequential damages in connection with the furnishing, performance, or use of this manual or the examples herein. Consumer transactions in Australia and the United Kingdom: The above disclaimers and limitations shall not apply to Consumer transactions in Australia and the United Kingdom and shall not affect the statutory rights of Consumers. © Copyright Hewlett-Packard Company 1998. All rights reserved. Reproduction, adaptation, or translation of this manual is prohibited without prior written permission of Hewlett-Packard Company, except as allowed under the copyright laws. The programs that control these products are copyrighted and all rights are reserved. Reproduction, adaptation, or translation of those programs without prior written permission of Hewlett-Packard Co. is also prohibited. Portions of the programs that control this product may also be copyrighted by Microsoft Corporation, SystemSoft Corp., Crystal Semiconductor Corporation, Phoenix Technologies, Ltd., and NeoMagic Corporation. See the individual programs for additional copyright notices. Microsoft, MS, MS-DOS, and Windows are registered trademarks of Microsoft Corporation. Pentium and the Intel Inside logo are U.S. registered trademarks and MMX is a U.S. trademark of Intel Corporation. For warranty information, see the Support and Service booklet. ,I[PIXX4EGOEVH'SQTER] 1SFMPI'SQTYXMRK(MZMWMSR 4VYRIVMHKI%ZI 'YTIVXMRS'%97% 1-2,

Contents

1. Using OmniBook Plug-In Modules... 1-5 To install hot-swap support ... 1-7 To replace a plug-in module... 1-7 Using the Floppy disk drive ... 1-9 To connect the floppy disk drive externally ... 1-9 Insert or eject a floppy disk ... 1-10 Using the CD-ROM drive ... 1-11 To insert or remove a CD ... 1-11 To open the CD-ROM drive manually ... 1-12 Using the LS-120 drive ... 1-13 To insert or eject a LS-120 diskette... 1-13 To eject a LS-120 disk manually ... 1-13 Using the DVD drive ... 1-15 To insert or remove a DVD disk ... 1-15 To open the DVD drive manually ... 1-16 To install the MPEG-2 PC Card and DVD Player software ... 1-16 To play a DVD movie ... 1-17 Using the Second Battery... 1-18 To handle and store the battery safely ... 1-18 To maintain and preserve battery life ... 1-19 2. Troubleshooting ... 1-21 Solving Problems with Plug-In Accessories... 1-23 Floppy disk drive problems ... 1-23 CD-ROM drive problems ... 1-24 LS-120 drive problems ... 1-24 DVD Drive Problems ... 1-25 Battery problems ... 1-25 3. Specifications and Regulatory Information... 1-27 Hardware Specifications and Safety ... 1-29 To use the CD-ROM and DVD drive safely ... 1-29 Regulatory Information ... 1-30 U.S.A. ... 1-30 Canada ... 1-31 Japan ... 1-31 Europe ... 1-32 1-3, Using OmniBook Plug-In Modules 1-5,

Using OmniBook Plug-In Modules

The OmniBook Plug-in Modules User’s Guide describes OmniBook plug-in accessory modules and shows you how to install and use them. For complete information about operating the OmniBook, consult the OmniBook Reference Guide and the online User’s Handbook. This manual explains how to ♦ Install hot-swap support ♦ Replace a plug-in accessory module in the OmniBook. ♦ Use the floppy disk drive. ♦ Use the CD-ROM drive. ♦ Use the LS-120 drive. ♦ Use the DVD drive. ♦ Use the second battery. 1-6, Using OmniBook Plug-In Modules 8SMRWXEPPLSXW[ETWYTTSVX

To install hot-swap support

The Agaté Tioman "hot-swap" software for Windows 95 and Windows 98 is loaded on the hard disk, but it is not installed. If you install this software, you can switch most modules in the plug-in bay without shutting down the computer and rebooting. (This software does not support Windows NT.) • Click Start, Programs, Agaté Tioman for HP, Setup, then follow the onscreen instructions.

To replace a plug-in module

2SXI • For Windows 95/Windows 98, if Agaté Tioman hot-swap software is installed, a plug-in module icon appears at the right end of the taskbar. This software lets you swap most plug-in modules without shutting down the computer. • If you are removing or inserting a hard disk drive in the module bay, you must shut down the computer. • If you are removing a battery and inserting another battery, you do not have to do steps 1 and 2 below—you can just change the batteries. ' % 9 8 - 3 2 -J]SYEVIMRWIVXMRKSVVIQSZMRKE'(631HVMZI(:(HVMZISVER]SXLIVX]TISJ HVMZI]SYQYWXYWIXLILSXW[ETWSJX[EVISVWLYXHS[RXLIGSQTYXIVSXLIV[MWI ]SYGSYPHPSWIHEXE 1. Close all files that are open from the plug-in module. 2. If the plug-in module icon is present in the taskbar, right-click the icon, then click Remove Device. When prompted to remove the module, click OK. (You do not have to do this if the bay is empty or contains a battery.) –or– Click Start, Shut Down to shut down the computer. (You must do this if you are removing or inserting a hard disk drive in the module bay.) 3. Slide the module release latch forward as far as it will go. 1-7, Using OmniBook Plug-In Modules 8SVITPEGIETPYKMRQSHYPI 4. Gently move the release latch back until the module pops out. 5. Grasp the underside of the module firmly, and pull out. 6. With the latch in the open position, slide the new plug-in module into the OmniBook until flush with the unit. 7. Close the module release latch. 1-8, Using OmniBook Plug-In Modules 9WMRKXLI*PSTT]HMWOHVMZI

Using the Floppy disk drive

You can install the floppy disk drive in the plug-in module bay or attach it externally to the parallel port. This section describes how to ♦ Connect the floppy disk drive externally. ♦ Insert or eject a floppy disk.

To connect the floppy disk drive externally

If you want to use the floppy disk drive while also using any other OmniBook plug-in module, you can use the external floppy disk drive cable (optional accessory F1473A) to connect the floppy disk drive module to the OmniBook via the parallel port. 1. Connect the floppy cable to the floppy disk drive module and tighten the knurled thumbscrews. 2. Connect the other end of the floppy disk drive cable to the OmniBook parallel port, as shown below. 1-9, Using OmniBook Plug-In Modules 9WMRKXLI*PSTT]HMWOHVMZI

Insert or eject a floppy disk

' % 9 8 - 3 2 (SRSXMRWIVXSVVIQSZIEJPSTT]HMWO[LMPIXLI3QRM&SSOMWEGXMZIP]VIEHMRKSV [VMXMRKHEXE3XLIV[MWI]SYGSYPHPSWIHEXESVXLI3QRM&SSOGSYPHWXST

VIWTSRHMRK

1. Hold the disk with its face up, then slide it into the floppy disk drive slot until it clicks into place. 2. To remove the floppy disk, press the eject button on the front of the drive. 1-10, Using OmniBook Plug-In Modules 9WMRKXLI'(631HVMZI

Using the CD-ROM drive

You can install the CD-ROM drive module in the plug-in module bay. This section describes how to ♦ Insert or remove a CD. ♦ Open the CD-ROM drive manually.

To insert or remove a CD

' % 9 8 - 3 2 (SRSXMRWIVXSVVIQSZIE'([LMPIXLI3QRM&SSOMWEGXMZIP]VIEHMRKHEXE 3XLIV[MWIXLI3QRM&SSOGSYPHWXSTVIWTSRHMRKERH]SYGSYPHPSWIHEXE 1. Press the button on the face of the CD-ROM drive. If you are using this drive for the first time, be sure to remove the cardboard packing insert if present. 2. Place the CD into the drive (label facing up) and gently press down to seat the CD on the spindle–or–remove the CD. 3. Slide the CD-ROM tray back into the module to close it. Open button 1-11, Using OmniBook Plug-In Modules 9WMRKXLI'(631HVMZI

To open the CD-ROM drive manually

If you lose power to the OmniBook, or if you’ve removed the CD-ROM module from the OmniBook, you can manually open the CD-ROM drive to remove a CD. • Carefully insert a straightened paper clip into the emergency eject hole, as shown below. 1-12, Using OmniBook Plug-In Modules 9WMRKXLI07HVMZI

Using the LS-120 drive

The LS-120 drive reads and writes to LS-120 disks (120 MB) and to conventional 3.5- inch IBM-formatted disks (1.44 MB), which are the same size and shape. However, the LS-120 drive reads and writes to LS-120 disks significantly faster than to conventional disks. You cannot boot from an LS-120 drive. This section describes how to ♦ Insert or eject a LS-120 disk. ♦ Eject a LS-120 disk manually.

To insert or eject a LS-120 diskette

' % 9 8 - 3 2 (SRSXMRWIVXSVVIQSZIE07HMWO[LMPIXLI3QRM&SSOMWEGXMZIP]VIEHMRKSV [VMXMRKHEXE3XLIV[MWIXLI3QRM&SSOGSYPHWXSTVIWTSRHMRKERH]SYGSYPHPSWI

HEXE

1. Hold the LS-120 disk with its face up, then slide it into the disk drive slot until it clicks into place. 2. To remove the LS-120 disk, press the eject button on the front of the drive as you would with a floppy drive (the drive will take a moment to eject the disk). –or– If you’re using Windows 95, right-click the LS-120 drive in Windows Explorer or My Computer and select Eject. This will not work in Windows NT 4.0.

To eject a LS-120 disk manually

' % 9 8 - 3 2 9WIXLIQERYEPHMWOINIGXTVSGIHYVISRP][LIR3QRM&SSOTS[IVMWSJJ(SRSXXV] XSJSVGMFP]VIQSZIE07HMWOJVSQXLIHVMZI-JXLIHMWOHSIWRSXINIGX MQQIHMEXIP]VITIEXXLIQERYEPHMWOINIGXTVSGIHYVI 1-13, Using OmniBook Plug-In Modules 9WMRKXLI07HVMZI The OmniBook must be powered on for normal disk ejection from the LS-120 drive. You can manually remove an LS-120 disk from the drive when power is off. • Carefully push a straightened paper clip into the emergency eject hole located above the eject button, as shown below. 1-14, Using OmniBook Plug-In Modules 9WMRKXLI(:(HVMZI

Using the DVD drive

Digital Versatile Disk (DVD) is a new standard of data storage. DVD disks deliver up to seven times the storage of CDs. DVD drives can also read standard CDs. You cannot boot from a CD or DVD in the DVD drive. This section describes how to • Insert or remove a DVD disk. • Open the DVD drive manually. • Install the MPEG-2 PC Card and DVD Player software. • Play a DVD movie.

To insert or remove a DVD disk

' % 9 8 - 3 2 (SRSXVIQSZIE'([LMPIXLI3QRM&SSOMWEGXMZIP]VIEHMRKHEXE3XLIV[MWIXLI 3QRM&SSOGSYPHWXSTVIWTSRHMRKERH]SYGSYPHPSWIHEXE 1. Press the button on the face of the DVD drive. If you are using this drive for the first time, be sure to remove the cardboard packing insert if present. 2. Place the DVD into the drive (label facing up) and gently press down to seat the DVD on the spindle–or–remove the DVD. 3. Slide the DVD tray back into the module to close it. Open button 1-15, Using OmniBook Plug-In Modules 9WMRKXLI(:(HVMZI

To open the DVD drive manually

If you lose power to the OmniBook, or if you’ve removed the DVD module from the OmniBook, you can manually open the DVD drive to remove a DVD disk. • Carefully insert a straightened paper clip into the emergency eject hole, as shown below.

To install the MPEG-2 PC Card and DVD Player software

In order to play DVD movies, you must install the MPEG-2 PC Card and DVD Player software included with your DVD module. 2SXI If you have Windows NT 4.0 on your OmniBook, you cannot play DVD movies. Windows NT 4.0 does not support zoomed video. 1. Insert the DVD module in the plug-in module bay. 2. Insert the CD-ROM included with the MPEG-2 PC Card into the DVD drive. 3. Insert the MPEG-2 PC Card in the lower card slot. 4. When the PC Card is detected, follow the instructions to load the appropriate driver from the CD-ROM. 1-16, Using OmniBook Plug-In Modules 9WMRKXLI(:(HVMZI 5. After the driver is successfully installed, run the Setup program on the CD-ROM included with the MPEG-2 PC Card and follow the installation instructions. This installs the DVD Player software onto your hard disk. 2SXI For complete instructions on the driver and player installation process, refer to the installation instructions included with the MPEG-2 PC Card.

To play a DVD movie

After you have installed the MPEG-2 PC Card and DVD Player software included with your DVD module, you can play a DVD movie. 1. Insert the DVD Module and MPEG-2 PC Card into your OmniBook. 2SXI If you do not have hot-swap drivers installed in your OmniBook, it may be necessary to shut down Windows prior to inserting the DVD plug-in module. 2. Insert the DVD disk into the module. 3. Click Start, Programs to run the DVD Player software. 1-17, Using OmniBook Plug-In Modules 9WMRKXLI7IGSRH&EXXIV]

Using the Second Battery

To increase the time you can work on battery power, you can install a second battery in the OmniBook’s plug-in module bay. This battery module is the same as that used in the main battery bay. This section contains instructions on the following: • To handle and store the battery safely. • To maintain and preserve the battery life.

To handle and store the battery safely

To safely use the battery, follow these instructions: • To avoid risk of fire, burns, or damage to your battery pack, do not allow metal objects to touch the battery contacts. • The battery pack is suitable for use only with compatible OmniBook models and specified battery charger. Check the Support and Service booklet for your local HP contact. • Do not disassemble. There are no serviceable parts inside. Do not dispose of the battery pack in fire or water. • Handle a damaged or leaking battery with extreme care. If you come in contact with the electrolyte, wash the exposed area with soap and water. If it contacts the eye, flush the eye with water for 15 minutes and seek medical attention. • Do not expose the battery pack to high storage temperatures (above 60 °C, 140 °F). • When the battery is not in use, store it in a battery pouch or other nonconductive case. • When discarding a battery pack, contact your local waste disposal provider regarding local restrictions on the disposal or recycling of batteries. • To obtain a replacement battery, contact your local dealer or HP sales office. • Do not charge the battery pack if the ambient temperature exceeds 45 °C (113 °F). 1-18, Using OmniBook Plug-In Modules 9WMRKXLI7IGSRH&EXXIV]

To maintain and preserve battery life

To preserve the life of your battery, be sure to charge the battery regularly. In cases of long-term storage, the battery must be charged at 20–50% to prevent capacity loss by self-discharge and to avoid deterioration of battery performance. • Do not leave batteries unused for long periods of time. If you have more than one, rotate them. • If you use ac power, make a point of using the battery once a week to keep it fresh. • Unplug your ac adapter when the computer is not in use. 1-19, Troubleshooting 1-21,

Troubleshooting

If you run into problems installing your OmniBook accessories, you can use the suggestions in this chapter to correct the problems. If you have questions that this manual doesn’t answer, you can • Check the problem-solving suggestions and references listed in the troubleshooting section of this manual, the OmniBook Reference Guide, and the online User’s Handbook. • Check with your computer system administrator, if you have one. • Contact your dealer, or contact Hewlett-Packard—see the OmniBook Support and Service booklet or OmniBook Support in the online OmniBook Library. 1-22, Troubleshooting 7SPZMRK4VSFPIQW[MXL4PYK-R%GGIWWSVMIW

Solving Problems with Plug-In Accessories

If your OmniBook accessory doesn’t seem to work properly, find the symptom below that matches your situation. Try the suggestions one at a time. For information about the latest software drivers, go to the HP OmniBook website at http://www.hp.com/omnibook. This section separates problems into the following categories: ♦ Floppy disk drive problems. ♦ CD-ROM drive problems. ♦ LS-120 drive problems. ♦ DVD drive problems. ♦ Battery problems.

Floppy disk drive problems

If the floppy disk drive doesn’t work • Remove and reinsert the floppy disk. • If connected externally, check the floppy disk drive cable connection. • Try using an alternate connection (internal or external connection). • Check to see that the floppy disk drive configuration is correct in the BIOS Setup utility. See the OmniBook Reference Guide for instructions on running the BIOS Setup utility. If the OmniBook doesn’t boot successfully from the floppy disk drive • If connected externally, check the floppy disk drive cable connection. • Try using an alternate connection (internal or external connection). • Run the BIOS Setup utility make sure that the floppy disk drive is the first boot device. See the OmniBook Reference Guide for instructions on running the BIOS Setup utility. 1-23, Troubleshooting 7SPZMRK4VSFPIQW[MXL4PYK-R%GGIWWSVMIW

CD-ROM drive problems

If the CD-ROM drive stops responding • Remove and reinsert the CD disk. • Restart the OmniBook. • If restarting the OmniBook does not solve the problem, remove and reinsert the CD-ROM module. If you cannot boot from a CD in the CD-ROM drive • Check that the CD is bootable. • Restart the OmniBook. • Remove and reinsert the CD-ROM module. • Run the BIOS Setup utility to make sure that the CD-ROM drive is the first boot devices. See the OmniBook Reference Guide for instructions on running the BIOS Setup utility.

LS-120 drive problems

If the LS-120 drive doesn’t work • Remove and reinsert the LS-120 disk. • Restart the OmniBook. • Remove and reinsert the LS-120 module. • If you are using Windows NT, look for information about updated LS-120 NT drivers in the readme file on the floppy disk included with your LS-120 drive. You can also connect to the OmniBook website for updated drivers at http://www.hp.com/omnibook. 1-24, Troubleshooting 7SPZMRK4VSFPIQW[MXL4PYK-R%GGIWWSVMIW

DVD Drive Problems

If the DVD drive stops responding • Remove and reinsert the DVD disk. • Reset the OmniBook. • Remove and reinsert the DVD module. • You cannot boot from a CD or DVD in a DVD drive. ;EVRMRK If you have installed the hot-swap drivers on your hard disk drive and want to play a DVD movie, please follow these steps to avoid problems: • Right-click the Hot-Swap icon on your Taskbar and select “About” to display the driver version. • If the version displayed is 3.01.04 or earlier, you must download the most recent driver from the OmniBook website at http://www.hp.com/omnibook and install it. The latest hot-swap drivers will prevent potential conflicts with the DVD movie player software.

Battery problems

If the OmniBook doesn’t turn on with a fresh battery • The new battery pack may be low. Plug in the ac adapter. • If nothing happens, press the blue power button for four seconds, then wait 10 seconds and press the power button again. If the battery pack doesn’t charge or stops charging • Check that the battery is fully installed and locked in place with the safety latch. • Shut down the OmniBook and remove the battery, then check that the battery contacts are clean. Make sure that the ac adapter cables are fully plugged in. 1-25, Troubleshooting 7SPZMRK4VSFPIQW[MXL4PYK-R%GGIWWSVMIW • Move the OmniBook away from any nearby heat source. Unplug the ac adapter and allow the battery to cool down. An elevated battery temperature prevents charging. If the battery runs down too fast • If the operating time has gotten shorter and the battery pack is more than a year or two old, you may need a new battery. If the OmniBook turns off immediately after it turns on • Battery power is probably extremely low. Plug in the ac adapter, or turn off the OmniBook and insert a fresh battery. If the OmniBook stops responding • Try waiting a few minutes for a response. If after a few minutes there is no response, press CTRL+ALT+DEL to close the non-responding application. • If nothing happens, press the blue power button for 4 seconds., After the computer turns off, press the power button again. • Use a paper clip to depress the system off button of the back of the unit, then press the blue power button. 1-26, Specifications and Regulatory Information 1-27,

Specifications and Regulatory Information

Your OmniBook accessories are designed to provide trouble-free operation. The following suggestions can help you while working with your OmniBook: ♦ Observe the temperature limits and other specifications listed in the next section. ♦ If you think your OmniBook might need repair service, see the warranty and service information in the Support and Service booklet. To contact Hewlett-Packard If you have questions that the OmniBook manuals don’t answer (even after looking in the contents and index), you can contact Hewlett-Packard at the address or phone number listed in the Support and Service booklet or in OmniBook Support in the online OmniBook Library. Please have your OmniBook with you when you call for support. 1-28, Specifications and Regulatory Information ,EVH[EVI7TIGMJMGEXMSRWERH7EJIX]

Hardware Specifications and Safety

*PSTT]HMWOHVMZI Modular 3.5-inch 1.44-MB floppy disk drive with parallel cable (available separately) for internal or external use. '(631HVMZI Modular drive. Photo-CD and CD-plus multi-session specification compliant, multimedia PC-3 specification compliant, supports sampling and digital filter for CD audio, software and manual eject. 07HVMZI Reads / writes LS-120 disks (120 MB). Reads / writes standard 3.5-inch disks (1.44 MB and 720 KB). Supports manual eject. (:(HVMZI Modular DVD-ROM drive. Photo-CD and CD-Extra multi-session, and Video CD specification compliant. Plays CD audio, and reads CD-R, DVD-R, and CD-RW. Software and manual eject. 0MXLMYQFEXXIV] Battery life (one battery): up to 3 hours (varies with type of usage). )RZMVSRQIRXEP0MQMXW Operating temperature: 5 to 35 °C (41 to 95 °F), Operating humidity: 20 to 90 percent (5 to 35 °C). Storage temperature: –20 to 50 °C (–40 to 122 °F).

To use the CD-ROM and DVD drive safely

• If the unit requires service, contact an authorized HP service center—see the OmniBook Support and Service booklet. • Do not attempt to make any adjustment to the unit. • Avoid direct exposure to the laser beam—do not open the unit. CLASS 1 LASER PRODUCT LASER KLASSE 1 1-29, Specifications and Regulatory Information 6IKYPEXSV]-RJSVQEXMSR

Regulatory Information

This section presents information that shows how the OmniBook plug-in modules comply with regulations in certain regions. Any modifications to the OmniBook or plug-in modules not expressly approved by Hewlett-Packard could void the authority to operate the OmniBook in these regions.

U.S.A.

The floppy disk drive generates and uses radio frequency energy and may interfere with radio and television reception. The floppy disk drive complies with the limits for a Class B computing device as specified in Part 15 of FCC Rules, which provide reasonable protection against such interference in a residential installation. In the unlikely event that there is interference to radio or television reception (which can be determined by removing the unit’s batteries and ac adapter), try the following: • Reorienting or relocating the receiving antenna. • Relocating the floppy disk drive with respect to the receiver. • Connecting the OmniBook ac adapter to another power outlet. Connections to Peripheral Devices To maintain compliance with FCC Rules and Regulations, use properly shielded cables with this device. For more information, consult your dealer, an experienced radio/television technician, or the following booklet, prepared by the Federal Communications Commission: How to Identify and Resolve Radio-TV Interference Problems. This booklet is available from the U.S. Government Printing Office, Washington, DC 20402, Stock Number 004-000-00345-4. At the first printing of this manual, the telephone number was (202) 512-1800. 1-30, Specifications and Regulatory Information 6IKYPEXSV]-RJSVQEXMSR Declaration of Conformity 6IWTSRWMFPI4EVX] Hewlett-Packard Company Manager of Corporate Product Regulations 3000 Hanover Street Palo Alto, CA 94304 (415) 857-1501 declares that the product(s) 8VEHIREQI Hewlett-Packard Company 4VSHYGXREQI F1472A floppy disk drive F1465A DVD drive F1470A LS-120 F1474A CD-ROM drive Complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation.

Canada

This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the radio interference regulations of the Canadian Department of Communications. Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites applicables aux appareils numériques de Classe B prescrites dans le règlement sur le brouillage radioélectrique édicté par le Ministère des Communications du Canada.

Japan

1-31, Specifications and Regulatory Information 6IKYPEXSV]-RJSVQEXMSR

Europe

Products sold in Europe by Hewlett-Packard and its authorized dealers meet the specifications listed below. Declaration of Conformity (according to ISO/IEC Guide 22 and EN 45014) 1ERYJEGXYVIV Hewlett-Packard Company %HHVIWW Hewlett-Packard Co. Mobile Computing Division 19310 Pruneridge Ave. Cupertino, CA 95014 declares that the following products 4VSHYGXREQI HP F1472A floppy disk drive 3TXMSRW All conforms to the following product specifications 7EJIX] IEC 950:1991+A1,A2, A3, A4 / EN 60950 (1992)+A1,A2, A3, A4 )1' CISPR 22:1993 / EN 55022 (1994): Class B [1 ] EN 50082-1:1992 IEC 801-2:1991 / prEN 55024-2 (1992): 4kV CD, 8kV AD IEC 801-3:1984 / prEN 55024-3 (1991): 3V/m IEC 801-4:1988 / prEN 55024-4 (1992): 0.5 kV signal lines, 1.0kV power lines 7YTTPIQIRXEV]-RJSVQEXMSR The product herewith complies with the requirements of the Low Voltage Directive 73/23/EEC and the EMC Directive 89/336/EEC and carries the CE mark accordingly. [1] The product was tested in a typical configuration with Hewlett- Packard personal computer peripherals. Quality Department Hewlett-Packard Company Mobile Computing Division 1-32, Specifications and Regulatory Information 6IKYPEXSV]-RJSVQEXMSR Declaration of Conformity (according to ISO/IEC Guide 22 and EN 45014) 1ERYJEGXYVIV Hewlett-Packard Company %HHVIWW Hewlett-Packard Co. Mobile Computing Division 19310 Pruneridge Ave. Cupertino, CA 95014 declares that the following products 4VSHYGXREQI HP F1474A CD-ROM drive 3TXMSRW All conforms to the following product specifications 7EJIX] IEC 950:1991+A1,A2, A3, A4 / EN 60950 (1992)+A1,A2, A3, A4 IEC 825/IEC 825-1 (EN60825/EN60825-1:1994):class1 )1' CISPR 22:1993 / EN 55022 (1994): Class B [1 ] EN 50082-1:1992 IEC 801-2:1991 / prEN 55024-2 (1992): 4kV CD, 8kV AD IEC 801-3:1984 / prEN 55024-3 (1991): 3V/m IEC 801-4:1988 / prEN 55024-4 (1992): 0.5 kV signal lines, 1.0kV power lines 7YTTPIQIRXEV]-RJSVQEXMSR The product herewith complies with the requirements of the Low Voltage Directive 73/23/EEC and the EMC Directive 89/336/EEC and IEC 825-1 and carries the CE mark accordingly. [1] The product was tested in a typical configuration with Hewlett- Packard personal computer peripherals. Quality Department Hewlett-Packard Company Mobile Computing Division 1-33, Specifications and Regulatory Information 6IKYPEXSV]-RJSVQEXMSR Declaration of Conformity (according to ISO/IEC Guide 22 and EN 45014) 1ERYJEGXYVIV Hewlett-Packard Company %HHVIWW Hewlett-Packard Co. Mobile Computing Division 19310 Pruneridge Ave. Cupertino, CA 95014 declares that the following products 4VSHYGXREQI HP F1470A LS-120 drive 3TXMSRW All conforms to the following product specifications 7EJIX] IEC 950:1991+A1,A2, A3, A4 / EN 60950 (1992)+A1,A2, A3, A4 )1' CISPR 22:1993 / EN 55022 (1994): Class B [1 ] EN 50082-1:1992 IEC 801-2:1991 / prEN 55024-2 (1992): 4kV CD, 8kV AD IEC 801-3:1984 / prEN 55024-3 (1991): 3V/m IEC 801-4:1988 / prEN 55024-4 (1992): 0.5 kV signal lines, 1.0kV power lines 7YTTPIQIRXEV]-RJSVQEXMSR The product herewith complies with the requirements of the Low Voltage Directive 73/23/EEC and the EMC Directive 89/336/EEC and carries the CE mark accordingly. [1] The product was tested in a typical configuration with Hewlett- Packard personal computer peripherals. Quality Department Hewlett-Packard Company Mobile Computing Division 1-34, Specifications and Regulatory Information 6IKYPEXSV]-RJSVQEXMSR Declaration of Conformity (according to ISO/IEC Guide 22 and EN 45014) 1ERYJEGXYVIV Hewlett-Packard Company %HHVIWW Hewlett-Packard Co. Mobile Computing Division 19310 Pruneridge Ave. Cupertino, CA 95014 declares that the following products 4VSHYGXREQI HP F1465A DVD drive 3TXMSRW All conforms to the following product specifications 7EJIX] IEC 950:1991+A1,A2, A3, A4 / EN 60950 (1992)+A1,A2, A3, A4 IEC 825/IEC825-1 )1' CISPR 22:1993 / EN 55022 (1994): Class B [1 ] EN 50082-1:1992 IEC 801-2:1991 / prEN 55024-2 (1992): 4kV CD, 8kV AD IEC 801-3:1984 / prEN 55024-3 (1991): 3V/m IEC 801-4:1988 / prEN 55024-4 (1992): 0.5 kV signal lines, 1.0kV power lines 7YTTPIQIRXEV]-RJSVQEXMSR The product herewith complies with the requirements of the Low Voltage Directive 73/23/EEC and the EMC Directive 89/336/EEC and carries the CE mark accordingly. [1] The product was tested in a typical configuration with Hewlett- Packard personal computer peripherals. Quality Department Hewlett-Packard Company Mobile Computing Division 1-35]
15

Similar documents

* The printed User's Handbook introduces the OmniBook and shows you the OmniBook basics. It also
10 January 2000 This file contains the most up-to-date information on the following topics: Sources of Information about the OmniBook and Windows Precautions Saving Power with Speed Step Technology Serial Mouse Problems Using an Older Microsoft Serial Mouse Model Using a Microsoft or Logitech PS/2 M
HP DiagTools User’s Guide
HP DiagTools User’s Guide Notice This manual and any examples contained herein are provided “as is” and are subject to change without notice. Hewlett-Packard Company makes no warranty of any kind with regard to this manual, including, but not limited to, the implied warranties of merchantability and
HP Encryption Smart Card Security System User’s Guide
HP Encryption Smart Card Security System User’s Guide %HIRUH
HP OmniBook Docking System User’s Guide
HP OmniBook Docking System User’s Guide 1-1 Notice This manual and any examples contained herein are provided “as is” and are subject to change without notice. Hewlett-Packard Company makes no warranty of any kind with regard to this manual, including, but not limited to, the implied warranties of m
HP OmniBook DiagTools User’s Guide
HP OmniBook DiagTools User’s Guide Notice This manual and any examples contained herein are provided “as is” and are subject to change without notice. Hewlett-Packard Company makes no warranty of any kind with regard to this manual, including, but not limited to, the implied warranties of merchantab
Service Manual HP OmniBook 800CS/CT
Service Manual HP OmniBook 800CS/CT Notice In a continuing effort to improve the quality of our products, technical and environmental information in this document is subject to change without notice. Hewlett-Packard makes no warranty of any kind with regard to this material, including, but not limit
SOLD BY laptopia2005 DO NOT RESELL!!
PROPRIETARY NOTICE AND LIABILITY DISCLAIMER The information disclosed in this document, including all designs and related materials, is the valuable property of NEC Computer Systems Division, Packard Bell NEC, Inc. (NECCSD, PBNEC) and/or its licensors. NECCSD and/or its licensors, as appropriate, re
SOLD BY laptopia2005 DO NOT RESELL!!
PROPRIETARY NOTICE AND LIABILITY DISCLAIMER The information disclosed in this document, including all designs and related materials, is the valuable property of NEC Computer Systems Division, Packard Bell NEC, Inc. (NECCSD, PBNEC) and/or its licensors. NECCSD and/or its licensors, as appropriate, re
SOLD BY laptopia2005 DO NOT RESELL!!
PROPRIETARY NOTICE AND LIABILITY DISCLAIMER The information disclosed in this document, including all designs and related materials, is the valuable property of NEC Computer Systems Division, Packard Bell NEC, Inc. (NECCSD, PBNEC) and/or its licensors. NECCSD and/or its licensors, as appropriate, re
SOLD BY laptopia2005 DO NOT RESELL!!
PROPRIETARY NOTICE AND LIABILITY DISCLAIMER The information disclosed in this document, including all designs and related materials, is the valuable property of NEC Computer Systems Division, Packard Bell NEC, Inc. (NECCSD, PBNEC) and/or its licensors. NECCSD and/or its licensors, as appropriate, re
SOLD BY laptopia2005 DO NOT RESELL!!
PROPRIETARY NOTICE AND LIABILITY DISCLAIMER The information disclosed in this document, including all designs and related materials, is the valuable property of NEC Corporation (NEC) and/or its licensors. NEC and/or its licen- sors, as appropriate, reserve all patent, copyright and other proprietary
SOLD BY laptopia2005 DO NOT RESELL!!
PROPRIETARY NOTICE AND LIABILITY DISCLAIMER The information disclosed in this document, including all designs and related materials, is the valuable property of NEC Computer Systems Division, Packard Bell NEC, Inc. (NECCSD, PBNEC) and/or its licensors. NECCSD and/or its licensors, as appropriate, re
SOLD BY laptopia2005 DO NOT RESELL!!
PROPRIETARY NOTICE AND LIABILITY DISCLAIMER T he information disclosed in this document, including all designs and related materials, is the valuable property of NEC Computer Systems Division, Packard Bell NEC, Inc. (NECCSD, PBNEC) and/or its licensors. NECCSD and/or its licensors, as appropriate, r
SOLD BY laptopia2005 DO NOT RESELL!!
PROPRIETARY NOTICE AND LIABILITY DISCLAIMER The information disclosed in this document, including all designs and related materials, is the valuable property of NEC Corporation (NEC) and/or its licensors. NEC and/or its licen- sors, as appropriate, reserve all patent, copyright and other proprietary
SOLD BY laptopia2005 DO NOT RESELL!!
PROPRIETARY NOTICE AND LIABILITY DISCLAIMER The information disclosed in this document, including all designs and related materials, is the valuable property of NEC Computer Systems Division, Packard Bell NEC, Inc. (NECCSD, PBNEC) and/or its licensors. NECCSD and/or its licensors, as appropriate, re
NEC Versa 2600 Series Service Guide Art Copy Version
NEC Versa 2600 Series Service Guide Art Copy Version PROPRIETARY NOTICE AND LIABILITY DISCLAIMER The information disclosed in this document, including all designs and related materials, is the valuable property of NEC Computer Systems Division, Packard Bell NEC, Inc. (NECCSD, PBNEC) and/or its licen
SOLD BY laptopia2005 DO NOT RESELL!!
PROPRIETARY NOTICE AND LIABILITY DISCLAIMER The information disclosed in this document, including all designs and related materials, is the valuable property of NEC Corporation (NEC) and/or its licensors. NEC and/or its licen- sors, as appropriate, reserve all patent, copyright and other proprietary
SOLD BY laptopia2005 DO NOT RESELL!!
VERSA 2000 (RT1) SERVICE AND REFERENCE MANUAL PROPRIETARY NOTICE AND LIABILITY DISCLAIMER The information disclosed in this document, including all designs and related materials, is the valuable property of NEC Corporation (NEC) and/or its licensors. NEC and/or its licensors, as appropriate, reserve
IBM Mobile Systems ThinkPad Computer Hardware Maintenance Manual June 2001 This manual supports: ThinkPad A21e, A22e, i 1800 (MT 2655/2663/2664)
IBM Mobile Systems ThinkPad Computer Hardware Maintenance Manual June 2001 This manual supports: ThinkPad A21e, A22e, i 1800 (MT 2655/2663/2664) Note Before using this information and the product it supports, be sure to read the general information under “Notices” on page 137. Second Edition (June 2
ThinkPad s30, s31 Hardware Maintenance Manual
ThinkPad s30, s31 Hardware Maintenance Manual Before using this information and the product it supports, be sure to read the general information under “Read This First” on page 1. Second Edition (October 2001) The following paragraph does not apply to the United Kingdom or any country where such pro
Note Before using this information and the product it supports, be sure to read the general information under “Safety
Note Before using this information and the product it supports, be sure to read the general information under “Safety information” on page v and “Notices” on page 41. First Edition (January 2000) The following paragraph does not apply in the United Kingdom or any other country where such provisions
HP Omnibook XE3 (Intel CPU Version: Technology Code GF) Service Manual
HP Omnibook XE3 (Intel CPU Version: Technology Code GF) Service Manual Notice In a continuing effort to improve the quality of our products, technical and environmental information in this document is subject to change without notice. This manual and any examples contained herein are provided “as is
HP Omnibook XE3 (AMD CPU Version: Technology Codes GE and GD) Service Manual
HP Omnibook XE3 (AMD CPU Version: Technology Codes GE and GD) Service Manual Notice In a continuing effort to improve the quality of our products, technical and environmental information in this document is subject to change without notice. This manual and any examples contained herein are provided
Notice In a continuing effort to improve the quality of our products, technical and environmental information
Notice In a continuing effort to improve the quality of our products, technical and environmental information in this document is subject to change without notice. This manual and any examples contained herein are provided “as is” and are subject to change without notice. Hewlett-Packard Company mak
Tips and Troubleshooting 1 Tips for Using Your OmniBook XE 2 Troubleshooting
Tips and Troubleshooting 1 Tips for Using Your OmniBook XE Configuring the OmniBook XE with the BIOS Setup Utility Testing the Operation of the OmniBook XE Creating a Hibernate Partition Recovering Software Enabling Pulse Dialing in France, Belgium, and Spain Using Enhanced Video and Dual Monitors 2
Notice In a continuing effort to improve the quality of our products, technical and environmental information
Notice In a continuing effort to improve the quality of our products, technical and environmental information in this document is subject to change without notice. This manual and any examples contained herein are provided “as is” and are subject to change without notice. Hewlett-Packard Company mak
Operating the HP Notebook PC with a Windows 2000 Upgrade
Operating the HP Notebook PC with a Windows 2000 Upgrade Certain OmniBook-specific functions of your computer will work differently with the new operating system, Windows 2000. This altered functionality is explained below. For general operating information using Windows 2000, refer to Microsoft’s W
Service Manual
Service Manual HP OmniBook 300, 425, 430, 530 Notice In a continuing effort to improve the quality of our products, technical and environmental information in this document is subject to change without notice. Hewlett-Packard makes no warranty of any kind with regard to this material, including, but
HP OmniBook 4000C/CT Familiarization Guide
HP OmniBook 4000C/CT Familiarization Guide This guide is for experienced HP Response Center personnel, CEs, and reseller technicians, such as personnel who have already completed the HP Vectra PC family training course, or equivalent, and have at least six months of experience servicing the HP Vectr
HP Notebook PC
HP Notebook PC Reference Guide Notice This manual and any examples contained herein are provided “as is” and are subject to change without notice. Hewlett-Packard Company makes no warranty of any kind with regard to this manual, including, but not limited to, the implied warranties of merchantabilit