Download: HP Encryption Smart Card Security System User’s Guide

HP Encryption Smart Card Security System User’s Guide %HIRUH...
Author: Anonymous
Downloads: 0 Views: 0

Content

HP Encryption Smart Card Security System User’s Guide, %HIRUHBefore You Begin Package Contents Your Encryption Smart Card Security System package contains: • 1 PCMCIA smart card reader • 2 GPK4000 smart cards (one spare card for backup/recovery purposes) • 1 CD-ROM containing the Encryption Smart Card Security System software • 1 User’s Guide (this manual) An optional pack of five smart cards is also available as a separate OmniBook accessory (order no. F1613A). System Requirements To install the Smart Card Security System, you need: • An OmniBook 900 or 4150 or later with Windows 95 OSR2, Windows 98, or Windows NT 4.0 (a Smart Card BIOS is included), or An OmniBook 2100, 3100, 4100, 7100, 7150 with Windows 95 OSR2, Windows 98, or Windows NT 4.0 (BIOS security features require a Smart Card BIOS, not included), or An OmniBook XE with Windows 98. BIOS security features are not supported. Future models may support other operating systems and BIOS security. • A CD-ROM drive installed in your OmniBook or available via a network (on certain OmniBook models the CD-ROM drive is an option that must be purchased separately). • 1 free PCMCIA slot • At least 7 megabytes of free hard disk space 2 English, %HIRUHOverview of the Setup Procedure Windows NT requires that an NT administrator set up the Smart Card Security System on an OmniBook. For a Windows 95/98 system, setup can be performed by the user. To ensure the setup procedure is successful, the following steps must be completed in order: 1. Install the drivers, software, and PCMCIA card reader 2. Initialize a smart card (Windows NT) 3. Update your OmniBook’s system BIOS 4. Enable BIOS smart card security 5. Set up a Secure folder on your hard disk 6. Make a recovery file These steps are discussed on the following pages. Caution Do not insert your smart card reader until instructed to do so by the installation program. 4 English, 6WHS,QVWDOOWKHGULYHUVVRIWZDUHDQG3&0&,$FDUGUHDGHU

Step 1: Install the drivers, software, and PCMCIA card

reader Caution Do not insert your smart card reader until instructed to do so by the installation program. 1. Start your OmniBook (for Windows NT, log on as Administrator) and wait for your Windows desktop to display. 2. Insert the Smart Card Security System CD. If your CD-ROM drive is configured to “autorun”, the smart card installation process will begin automatically. If it is not, use Windows Explorer to browse the CD contents and double-click the file setup.exe in the root directory to run the installation. 3. Click “Install HP Encryption Smart Card Security System” to start the setup. 4. When the installation process asks you to install the PCMCIA card reader, make sure the label is facing up. For Windows NT, if Service Pack 4 (SP4) is not installed, the system will prompt you to let it be installed from the Smart Card Security System CD. Your Secure folder will be C:\Private by default, but may be changed during installation if desired. Your OmniBook will be restarted when the installation is complete. English 5, 6WHS,QLWLDOL]HDVPDUWFDUG :LQGRZV 17

Step 2: Initialize a smart card (Windows NT)

For Windows 95/98, go to “Step 3” on page 8. A smart card can be initialized only after the software has been installed and your OmniBook has been restarted (Step 1). 1. For Windows NT, if you have just installed the software and your OmniBook has been restarted, you will be asked to insert an uninitialized smart card into the card reader. Insert the card face-up and so the end nearest the gold memory emblem goes in first. 2. Enter the card holder’s name and a PIN (personal identification number). The name is permanent and can not be changed. The PIN must be exactly eight digits long and contain only numbers. You must enter the PIN twice for verification. 3. Click OK. Note Memorize your PIN! You will not be able to use your smart card to gain access to your OmniBook if you forget the PIN. You may wish to write the PIN on a piece of paper and keep it in a safe place, such as a safety deposit box. 4. Enter the NT logon name, password, and domain name, followed by the card’s PIN. 5. Click OK. The smart card is now ready for use. Initializing Further Smart Cards You can initialize as many cards as you want. Each authorized user can have their own smart card with user name and PIN. Two blank uninitialized smart cards are provided with the Smart Card Security System. 6 English, 6WHS,QLWLDOL]HDVPDUWFDUG :LQGRZV 17 Once you have initialized the first smart card, you can initialize further cards at any time as follows: 1. Log on to your OmniBook using your smart card. 2. Click Start, Programs, HP Security System, Smart Card Security Manager to run the Smart Card Security Manager. 3. For Windows NT, click the NT Logon tab, then click Options. Change the “On card removal” setting to “Continue.” For Windows 95/98, click the Win95/98 tab. Disable the option “Launch screen saver on smart card removal.” 4. Insert an uninitialized smart card into the reader. 5. Click the Smart Card tab. 6. Click Initialize. 7. Follow the instructions to initialize the card. 8. On the NT Logon or Win 95/98 tab, restore the card-removal setting you changed above. Multiple Accounts on a Single Smart Card You can create multiple NT logon accounts on a single card. Each account has its own user name, password and domain. This means you can access several different accounts with one smart card. For further information, refer to the online help. English 7, 6WHS8SGDWH\RXU2PQL%RRN·VV\VWHP%,26

Step 3: Update your OmniBook’s system BIOS

For an OmniBook 900 or 4150 with a BIOS version earlier than 2.20, or for an OmniBook with a Smart Card BIOS available on the OmniBook website, www.hp.com/omnibook, update the BIOS to support BIOS security features. To determine your BIOS version, reboot the computer and press F2 when you see the HP logo—the first screen of BIOS Setup shows the BIOS version. Skip these steps if your BIOS is a Smart Card BIOS or if none is available for your model. Follow these steps to update your BIOS: 1. Start Windows Explorer. 2. Insert the Smart Card Security System CD and run setup.exe. 3. In the Smart Card Setup window, click the “Smart Card BIOS Update” option. Caution Your OmniBook must be on ac power during BIOS update because a power loss will completely disable your OmniBook computer. 4. Follow the displayed instructions to create a BIOS update floppy and update the BIOS. 8 English, 6WHS(QDEOH%,26VPDUWFDUGVHFXULW\

Step 4: Enable BIOS smart card security

This step must be performed by the BIOS administrator. Follow these steps to enable BIOS smart card security on your OmniBook (if it is supported): 1. Click Start, Programs, HP Security System, Smart Card Security Manager to run the Smart Card Security Manager. 2. Click the BIOS Password tab. 3. Insert a smart card into the reader. Ensure this card is the one you want to be the BIOS Administrator card. For Windows NT, this could be the NT administrator card. 4. If the Enable button is dimmed, BIOS security is not supported. Skip to “Step 5” on page 10. 5. Click Enable to create the BIOS Administrator card. Note For ease of use, HP recommends that you do not enable the option requiring the PIN at boot. The presence of the card unlocks the computer. Setting Up a BIOS User Password Card Follow these steps to set up a BIOS user password in the BIOS and store it on a smart card. 1. Click Start, Programs, HP Security System, Smart Card Security Manager to run the Smart Card Security Manager. 2. Click the BIOS Password tab. 3. Click Set next to “BIOS User Password” and follow the instructions to create a BIOS user password card. You must have the BIOS administrator card available. English 9, 6WHS6HWXSD6HFXUHIROGHURQ\RXUKDUGGLVN

Step 5: Set up a Secure folder on your hard disk

The Secure folder holds files that are automatically encrypted. The encryption key is kept on the user smart card. 1. Insert your user smart card into the reader. 2. Click Start, Programs, HP Security System, Smart Card Security Manager to run the Smart Card Security Manager. 3. Click the Encryption tab. 4. Click Create and follow the instructions. 10 English, 6WHS0DNHDUHFRYHU\ILOH

Step 6: Make a recovery file

Note HP strongly recommends you make a new encrypted recovery file of your smart card data now and also whenever you change a smart card password. This recovery file will allow you to recreate your smart card (and, more importantly, access your computer) if the card is lost, stolen, or damaged. You can keep old recovery files in case you need to create an old card. Even if you created a recovery file earlier, you should make another one now to ensure it includes all the latest information entered up to this point. To make a recovery file of your smart card: 1. Click Start, Programs, HP Security System, Smart Card Security Manager to run the Smart Card Security Manager. 2. Click the Smart Card tab. 3. Insert a formatted floppy disk in the floppy drive. 4. In the Recovery section, click Create and follow the instructions. The recovery file is encrypted and saved on the floppy disk. 5. Store the floppy disk in a safe place. Note Memorize the recovery file password! You will not be able recreate your smart card from the recovery file if you forget the password. You may wish to make a note of the password on a piece of paper and keep it in a safe place, such as a safety deposit box. Do not save the recovery file on your OmniBook’s hard disk because you will not be able to access the file without your smart card. Furthermore, the recovery file may be accessible to others, which can pose a security risk. English 11, 8VLQJUsing Your Smart Card When properly set up, the HP Smart Card Security System ensures only users with your smart card and the correct PIN (personal identification number) can use your OmniBook. See page 15 for setup options. Starting or Logging On To Your OmniBook To start or log on to your OmniBook, insert your smart card into the reader and enter your PIN if prompted. Note If the PIN is entered incorrectly seven times, the smart card will be automatically locked (disabled) to ensure the OmniBook’s security. Once disabled, the smart card is permanently unusable and should be discarded. If you don’t have a smart card BIOS, the normal BIOS password and NT logon provide security. Logging Off or Locking Your OmniBook To lock your OmniBook, remove your card from the reader. The OmniBook will automatically lock—if the Smart Card Security Manager is configured to do this. Or you can allow the secure screen saver to activate. For Windows NT users, the NT logon options can be changed only by the administrator. Undocking Your OmniBook or Resuming From Suspend To undock your OmniBook or resume from suspend, you must insert the smart card into the reader and enter your PIN. Note that you cannot undock your OmniBook while in MS-DOS mode. First exit back to Windows, then undock. 12 English, 8VLQJUsing the Smart Card Security Manager Note HP recommends that you not change the default administrator settings in the Smart Card Security Manager unless you are familiar with NT logon practices. At the desktop, access the Smart Card Security Manager by clicking Start, Programs, HP Security System, Smart Card Security Manager. Smart Card Options To see the following options, click the Smart Card tab in the Smart Card Security Manager. Initialize a Smart Card A smart card must be initialized before it can be used. This option is activated only if the administrator settings in the Smart Card Security Manager allow it. Refer to page 6 for instructions. Change a Smart Card’s PIN You can change your smart card’s PIN (Personal Identification Number). The PIN must be exactly eight digits long and can contain only numbers. To change the PIN: 1. Run the Smart Card Security Manager and click the Smart Card tab. 2. Click Change PIN. 3. Enter the old PIN, then the desired PIN (twice). 4. Click OK. English 15, 8VLQJWKH6PDUW&DUG6HFXULW\0DQDJHU Create a Recovery File It is strongly recommended that you create a recovery file after creating a new smart card or changing a smart card’s data. The recovery file will allow you to recreate your smart card if it is lost or stolen. Refer to page 11 for instructions. Restore a Smart Card You can create a duplicate smart card from a recovery file. This is especially useful if your card was lost or stolen, or if you simply want to create a backup smart card, ready for use. Before starting, you will need: • Access to a computer that has the Smart Card Security System reader and software installed. • The floppy disk containing the recovery file. • An uninitialized OmniBook smart card. You can’t use a disabled card. Note If you use a smart card that is not blank, the original contents of the card (such as logon name, password, and encryption key) will be deleted during the recovery process. The card’s user name and PIN will not change. To restore a smart card: 1. Click Start, Programs, HP Security System, Smart Card Security Manager to run the Smart Card Security Manager. 2. For Windows NT, click the NT Logon tab, then click Options. Change the “On card removal” setting to “Continue.” For Windows 95/98, click the Win95/98 tab. Disable the option “Launch screen saver on smart card removal.” 3. Click the Smart Card tab. 4. Insert the floppy disk containing the recovery file in the floppy drive. 5. Insert the smart card into the reader. 6. In the Recovery section, click Restore. 16 English, 8VLQJWKH6PDUW&DUG6HFXULW\0DQDJHU 7. Ensure the correct recovery file name is selected. 8. Enter the recovery file’s password (the one you entered when you created the recovery file) and click OK. 9. On the NT Logon or Win 95/98 tab, restore the card-removal setting you changed above. The original smart card contents will be restored to the new smart card. BIOS Password Options To see these options, click the BIOS Password tab in the Smart Card Security Manager. These options allow you to do the following: • Enable or disable BIOS smart card security. This is a BIOS administrator option. Note that disabling this option clears all BIOS passwords. • Change the BIOS administrator or user password stored in the BIOS. • Store or change a BIOS password on a smart card. Note that changing your card’s password will make it unable to unlock your computer. • Change whether the smart card’s PIN must be entered to boot the OmniBook. For ease of use, leave this option disabled. The PIN is still required to start Windows NT. See the online help for more information. NT Logon Options To see these options, click on the NT Logon tab in the Smart Card Security Manager. This tab appears only for Windows NT. These options allow you to add and remove Windows NT accounts from your smart card. This means you can use your smart card to log on to several different Windows NT accounts, as well as change the password for any of these accounts. English 17, 8VLQJWKH6PDUW&DUG6HFXULW\0DQDJHU All other NT Logon options are disabled for the user and can be changed only by the administrator. Win 95/98 Options To see these options, click the Win 95/98 tab in the Smart Card Security Manager. This tab appears only for Windows 95 or 98. These options allow you to do the following: • Enable or disable the secure screen saver. The secure screen saver provides smart card security whenever you remove the card and when the screen saver activates. • Enable or disable smart card security when undocking or when resuming operation after the computer suspends. See the online help for more information. Encryption Options To see these options, click the Encryption tab in the Smart Card Security Manager. These options allow you to do the following: • Create a new encryption key. The new key cannot decrypt files created with a different key. • Specify when the Secure folder locks. You can make the Secure folder lock as soon as the card is removed, or it can remain unlocked until logoff. See the online help for more information. 18 English, 'RFXPHQWDWLRQDQG+HOS

Documentation and Help

There are several sources of documentation and help for the HP Smart Card Security System: • The online help contains information about using and configuring the Smart Card Security System. The online help is installed on your OmniBook when you install the Smart Card Security System. You can also access the online help in the \DOC directory on the Smart Card Security System CD. • HP’s web site resources, including software and drivers, manuals, FAQs (Frequently Asked Questions) and technical notes. There is also information about HP’s Smart Card Ready program. Go to http://www.hp.com/omnibook/security. English 19, 7URXEOHVKRRWLQJ

Troubleshooting If you are experiencing any problems with your OmniBook, do not log off

or remove your smart card until the problem has been resolved.

Additional troubleshooting information is available in the online help.

3UREOHP ([SODQDWLRQ $FWLRQ ,ORVWP\VPDUW ,I\RXDUHXVLQJ17\RXZLOOQRZEH 0DNHDQHZFDUGRQDQRWKHU2PQL%RRNZLWKD FDUG XQDEOHWRORJRQWR\RXU17DFFRXQWDQG 6PDUW&DUG6HFXULW\6\VWHPXVLQJ\RXU JDLQDFFHVVWR\RXU2PQL%RRNFRPSXWHU ,IWKHFRPSXWHUZLOOQRWXQORFNXVHDQ DGPLQLVWUDWRUFDUGRUFDOO+3IRUDVVLVWDQFHLQ UHVWRULQJWKH%,26SDVVZRUG7KHQPDNHD QHZFDUGXVLQJWKHUHFRYHU\ILOH,IQRUHFRYHU\ ILOHLVDYDLODEOHHQFU\SWHGGDWDLVQRW

UHFRYHUDEOH

,FDQQRWORJRQWR FDUG )LOHVFRSLHGLQWRWKH 7KHVPDUWFDUG\RXXVHGWRPRYH\RXU ,QVHUWDFDUGZLWKDGLIIHUHQWHQFU\SWLRQNH\ 6HFXUHIROGHUGRQ¶W ILOHVLQWRWKH6HFXUHIROGHULVVWLOOLQVHUWHG LQWRWKHUHDGHUDQGFKHFNWKHFRQWHQWRI\RXU VHHPWREH LQWKHUHDGHUDQG\RXVWLOOKDYHDFFHVVWR ILOHVWKH\VKRXOGEHXQUHDGDEOH HQFU\SWHG DOOWKHILOHV\RXPRYHGLQWRWKH6HFXUH

IROGHU

(QFU\SWHGWH[W 7KHFDUGLQVHUWHGLQWKHUHDGHULVQRWWKH ,QVHUWWKHFRUUHFWFDUGDQGHQWHU\RXU3,1WR GHFU\SWVEDGO\ RQH\RXXVHGWRHQFU\SW\RXUILOHV DFFHVVWKH6HFXUHIROGHU ,FDQ¶WGHOHWHDILOH )RUVHFXULW\UHDVRQVGHOHWLQJILOHVXVLQJ 7RGHOHWHDILOHIURPWKH6HFXUHIROGHUXVH LQP\6HFXUHIROGHU 'HOHWHLVQRWUHFRPPHQGHG LWZRXOG 6KLIW'HOHWH XVLQJWKH'HOHWH OHDYHDFRS\LQWKH5HF\FOH%LQ NH\ $PHVVDJHWHOOVPH 7KH6PDUW&DUG6HFXULW\0DQDJHULV &KHFNWKDWWKHVPDUWFDUGLVFRUUHFWO\LQVHUWHG WKDWDFFHVVWRWKH XQDEOHWRUHWULHYHLQIRUPDWLRQVWRUHGRQ LQWKHUHDGHUDQGWKHUHDGHULVFRUUHFWO\ VPDUWFDUGLV WKHVPDUWFDUG LQVHUWHGLQWKH3&0&,$VORW,QVHUWWKHFDUG GHQLHG IDFHXSDQGVRWKHHQGQHDUHVWWKHJROG PHPRU\HPEOHPJRHVLQILUVW English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etting HP OmniBook Assistance Support Assistance If you need assistance with your HP OmniBook or accessory, use any of the following support services: 3URYLGHU7\SH 7\SHRI$VVLVWDQFH ³(OHFWURQLF6XSSRUW6HUYLFHV´ +3VHOIKHOSWRROVLQIRUPDWLRQDQG GHVFULEHGEHORZ VRIWZDUH $SSURYHGDQG7HVWHG6ROXWLRQV ³&XVWRPHU6XSSRUW6HUYLFHV´ 7HOHSKRQHVXSSRUWDVVLVWDQFH GHVFULEHGEHORZ ,QDQGRXWRIZDUUDQW\UHSDLUSURFHVVHV +3DXWKRUL]HGUHVHOOHUV /RFDOVXSSRUWDVVLVWDQFH 5HIHUUDOWR&XVWRPHU6XSSRUW&HQWHURU +3DSSURYHGVXSSRUWSURYLGHU

Electronic Support Services

HP OmniBook World Wide Web: Download technical information, drivers and software from the web at www.hp.com/omnibook. HP OmniBook & Peripheral Self-Help and Direct-Help Tools: Visit the web at: http://www.hp.com/cpso-support/guide/home.html. • Choose Self-Help Tools to use a number of services that offer information and software that will help you make the most of your HP products. • The HP FIRST Fax Retrieval System - (800) 333-1917 (inside U.S. and Canada) - (208) 344-4809 (outside U.S. and Canada) • Bulletin Boards • Commercial Online Services English 23, *HWWLQJ+32PQL%RRN$VVLVWDQFH • CD-ROM Subscriptions • Service Parts Information • Choose Talk to HP Directly for information about how to contact HP for telephone assistance from our technical Customer Support Centers, or for receiving drivers and software by mail. • Customer Support Centers • Software Distribution

Customer Support Centers

HP Customer Support Centers, will assist you for free (you are responsible for the telephone charges) during the term of the warranty. Refer also to http://www.hp.com/cpso-support/guide/home.html. 'XULQJWKHIUHHDVVLVWDQFHSHULRG +3ZLOOQRWEHDEOHWRKHOSZLWK +3ZLOODVVLVWZLWKTXHVWLRQV TXHVWLRQVDERXW

DERXW

,QFOXGHGDSSOLFDWLRQVDQGRSHUDWLQJ 1RQ+3KDUGZDUHVRIWZDUHRSHUDWLQJ V\VWHPV V\VWHPVRUXVDJHQRWLQWHQGHGIRURU LQFOXGHG E\+3 ZLWKWKHSURGXFW +3GHVFULEHGRSHUDWLRQHQYLURQPHQWV DQGFRQGLWLRQV +RZWRUHSDLUWKHSURGXFW\RXUVHOI +3DFFHVVRULHV+3XSJUDGHVDQGEDVLF 3URGXFWGHYHORSPHQWFXVWRP RSHUDWLRQDQGWURXEOHVKRRWLQJ LQVWDOODWLRQV &RQVXOWLQJ 24 English, *HWWLQJ+32PQL%RRN$VVLVWDQFH 86&DQDGD (QJOLVK )UHQFK &DQDGD $VLD3DFLILF (XURSH %HOJLXP 'XWFK %HOJLXP )UHQFK 'HQPDUN )LQODQG )UDQFH *HUPDQ\ ,WDO\ 1RUZD\ 6SDLQ 6ZHGHQ 8QLWHG.LQJGRP /DWLQ$PHULFD 2WKHUFRXQWULHV Repair Assistance Warranty. You must contact one of the participating support providers listed in item 2 in “Support Assistance” on page 23, or an HP Service Center to receive warranty service. The support provider will help qualify your unit for warranty repair based on the warranty applicable to your unit and original purchase date, and will provide you with repair processes in your area. Warranty service includes the cost of shipping, handling, duties, taxes, freight and/or fees to or from the service location. Out of Warranty. Contact one of the support providers listed in items 2 or 3 in “Support Assistance” on page 23, or an HP Service Center. The support provider will provide you with repair charges and processes in your area. English 25, +3/LPLWHG:DUUDQW\6WDWHPHQW

HP Limited Warranty Statement

1. HP warrants to you, the end-user customer, that HP hardware, accessories and supplies will be free from defects in materials and workmanship after the date of purchase, for the period specified in the Warranty Duration sheet included with your OmniBook. If HP receives notice of such defects during the warranty period, HP will, at its option, either repair or replace products which prove to be defective. Replacement products may be either new or equivalent in performance to new. 2. HP warrants to you that HP software will not fail to execute its programming instructions after the date of purchase, for the period specified in the Warranty Duration sheet included with your OmniBook, due to defects in material and workmanship when properly installed and used. If HP receives notice of such defects during the warranty period, HP will replace software which does not execute its programming instructions due to such defects. 3. HP does not warrant that the operation of HP products will be uninterrupted or error free. If HP is unable, within a reasonable time, to repair or replace any product to a condition as warranted, you will be entitled to a refund of the purchase price upon prompt return of the product. 4. HP products may contain remanufactured parts equivalent to new in performance or may have been subject to incidental use. 5. Warranty does not apply to defects resulting from (a) improper or inadequate maintenance or calibration, (b) software, interfacing, parts or supplies not supplied by HP, (c) unauthorized modification or misuse, (d) operation outside of the published environmental specifications for the product, or (e) improper site preparation or maintenance. 6. TO THE EXTENT ALLOWED BY LOCAL LAW, THE ABOVE WARRANTIES ARE EXCLUSIVE AND NO OTHER WARRANTY OR CONDITION, WHETHER WRITTEN OR ORAL, IS EXPRESSED OR IMPLIED AND HP SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY, SATISFACTORY QUALITY, AND FITNESS FOR A PARTICULAR PURPOSE. Some countries, states or provinces do not allow limitations on the duration of an implied warranty, so the above limitation or exclusion might not apply to you. This warranty gives you specific legal rights and you might also have other rights that vary from country to country, state to state, or province to province. 7. TO THE EXTENT ALLOWED BY LOCAL LAW, THE REMEDIES IN THIS WARRANTY STATEMENT ARE YOUR SOLE AND EXCLUSIVE REMEDIES. EXCEPT AS INDICATED ABOVE, IN NO EVENT WILL HP OR ITS SUPPLIERS BE LIABLE FOR LOSS OF DATA OR FOR DIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL (INCLUDING LOST PROFIT OR DATA), OR OTHER DAMAGE, WHETHER BASED IN CONTRACT, TORT, OR OTHERWISE. Some countries, states or provinces do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. THE WARRANTY TERMS CONTAINED IN THIS STATEMENT, EXCEPT TO THE EXTENT LAWFULLY PERMITTED, DO NOT EXCLUDE, RESTRICT OR MODIFY AND ARE IN ADDITION TO THE MANDATORY STATUTORY RIGHTS APPLICABLE TO THE SALE OF THIS PRODUCT TO YOU. In addition to the Limited Warranty Statement above, and to the extent permitted by local law, Hewlett-Packard Company expressly disclaims any warranty that this product will be error-free. Hewlett-Packard Company makes no warranty that any data stored or encrypted by this product will be recoverable or accessible, or that access provided by this product will be maintained. The Gemplus smart card reader is not covered by the HP Limited Warranty Statement above. Refer to the Gemplus Limited Warranty Statement included with the reader. 26 English, +36RIWZDUH/LFHQVH$JUHHPHQW

HP Software License Agreement

CAREFULLY READ THIS LICENSE AGREEMENT BEFORE PROCEEDING TO OPERATE THE HP ACCESSORY. RIGHTS IN THE SOFTWARE ARE OFFERED ONLY ON THE CONDITION THAT THE CUSTOMER AGREES TO ALL TERMS AND CONDITIONS OF THIS LICENSE AGREEMENT. PROCEEDING TO INSTALLING AND USING THE ACCESSORY INDICATES YOUR ACCEPTANCE OF THESE TERMS AND CONDITIONS. IF YOU DO NOT AGREE TO THE LICENSE AGREEMENT, YOU MUST NOW DESTROY ANY MASTER DISKETTES OR CD-ROMS, OR RETURN THE COMPLETE ACCESSORY AND SOFTWARE FOR A FULL REFUND. UNLESS OTHERWISE STATED BELOW, THIS HP SOFTWARE PRODUCT LICENSE AGREEMENT SHALL GOVERN THE USE OF ALL SOFTWARE THAT IS PROVIDED TO YOU, THE CUSTOMER, AS PART OF THE HP ACCESSORY. IT SHALL SUPERSEDE ANY NON-HP SOFTWARE LICENSE TERMS THAT MAY BE FOUND ON-LINE, OR IN ANY DOCUMENTATION OR OTHER MATERIALS CONTAINED IN THE ACCESSORY PRODUCT PACKAGING. Note: Any software provided by Microsoft is licensed to you under the Microsoft End User License Agreement (EULA) contained in the Microsoft documentation. The following License Terms govern the use of the software: USE. Customer may use the software on any one computer. Customer may not network the software or otherwise use it on more than one computer. Customer may not reverse assemble or decompile the software unless authorized by law. COPIES AND ADAPTATIONS. Customer may make copies or adaptations of the software (a) for archival purposes or (b) when copying or adaptation is an essential step in the use of the software with a computer so long as the copies and adaptations are used in no other manner. OWNERSHIP. Customer agrees that he/she does not have any title or ownership of the software, other than ownership of the physical media. Customer acknowledges and agrees that the software is copyrighted and protected under the copyright laws. Customer acknowledges and agrees that the software may have been developed by a third party software supplier named in the copyright notices included with the software, who shall be authorized to hold the Customer responsible for any copyright infringement or violation of this Agreement. TRANSFER OF RIGHTS IN SOFTWARE. Customer may transfer rights in the software to a third party only as part of the transfer of all rights and only if Customer obtains the prior agreement of the third party to be bound by the terms of this License Agreement. Upon such a transfer, Customer agrees that his/her rights in the software are terminated and that he/she will either destroy his/her copies and adaptations or deliver them to the third party. SUBLICENSING AND DISTRIBUTION. Customer may not lease, sublicense the software or distribute copies or adaptations of the software to anyone in physical media or by telecommunication without the prior written consent of Hewlett-Packard. TERMINATION. Hewlett-Packard may terminate this software license for failure to comply with any of these terms provided Hewlett-Packard has requested Customer to cure the failure and Customer has failed to do so within thirty (30) days of such notice. UPDATES AND UPGRADES. Customer agrees that the software does not include updates and upgrades which may be available from Hewlett-Packard under a separate support agreement. EXPORT CLAUSE. Customer agrees not to export or re-export the software or any copy or adaptation in violation of the U.S. Export Administration regulations or other applicable regulation. U.S. GOVERNMENT RESTRICTED RIGHTS. Use, duplication, or disclosure by the U.S. Government is subject to restrictions as set forth in subparagraph (c)(1)(ii) of the Rights in Technical Data and Computer Software clause in DFARS 252.227-7013. Hewlett-Packard Company. 3000 Hanover Street, Palo Alto, CA 94304 U.S.A. Rights for non-DOD U.S. Government Departments and Agencies are as set forth in FAR 52.227-19(c)(1,2). (9 Nov 1998)

English 27

, +36RIWZDUH/LFHQVH$JUHHPHQW 28 English]
15

Similar documents

HP OmniBook Docking System User’s Guide
HP OmniBook Docking System User’s Guide 1-1 Notice This manual and any examples contained herein are provided “as is” and are subject to change without notice. Hewlett-Packard Company makes no warranty of any kind with regard to this manual, including, but not limited to, the implied warranties of m
HP OmniBook DiagTools User’s Guide
HP OmniBook DiagTools User’s Guide Notice This manual and any examples contained herein are provided “as is” and are subject to change without notice. Hewlett-Packard Company makes no warranty of any kind with regard to this manual, including, but not limited to, the implied warranties of merchantab
Service Manual HP OmniBook 800CS/CT
Service Manual HP OmniBook 800CS/CT Notice In a continuing effort to improve the quality of our products, technical and environmental information in this document is subject to change without notice. Hewlett-Packard makes no warranty of any kind with regard to this material, including, but not limit
SOLD BY laptopia2005 DO NOT RESELL!!
PROPRIETARY NOTICE AND LIABILITY DISCLAIMER The information disclosed in this document, including all designs and related materials, is the valuable property of NEC Computer Systems Division, Packard Bell NEC, Inc. (NECCSD, PBNEC) and/or its licensors. NECCSD and/or its licensors, as appropriate, re
SOLD BY laptopia2005 DO NOT RESELL!!
PROPRIETARY NOTICE AND LIABILITY DISCLAIMER The information disclosed in this document, including all designs and related materials, is the valuable property of NEC Computer Systems Division, Packard Bell NEC, Inc. (NECCSD, PBNEC) and/or its licensors. NECCSD and/or its licensors, as appropriate, re
SOLD BY laptopia2005 DO NOT RESELL!!
PROPRIETARY NOTICE AND LIABILITY DISCLAIMER The information disclosed in this document, including all designs and related materials, is the valuable property of NEC Computer Systems Division, Packard Bell NEC, Inc. (NECCSD, PBNEC) and/or its licensors. NECCSD and/or its licensors, as appropriate, re
SOLD BY laptopia2005 DO NOT RESELL!!
PROPRIETARY NOTICE AND LIABILITY DISCLAIMER The information disclosed in this document, including all designs and related materials, is the valuable property of NEC Computer Systems Division, Packard Bell NEC, Inc. (NECCSD, PBNEC) and/or its licensors. NECCSD and/or its licensors, as appropriate, re
SOLD BY laptopia2005 DO NOT RESELL!!
PROPRIETARY NOTICE AND LIABILITY DISCLAIMER The information disclosed in this document, including all designs and related materials, is the valuable property of NEC Corporation (NEC) and/or its licensors. NEC and/or its licen- sors, as appropriate, reserve all patent, copyright and other proprietary
SOLD BY laptopia2005 DO NOT RESELL!!
PROPRIETARY NOTICE AND LIABILITY DISCLAIMER The information disclosed in this document, including all designs and related materials, is the valuable property of NEC Computer Systems Division, Packard Bell NEC, Inc. (NECCSD, PBNEC) and/or its licensors. NECCSD and/or its licensors, as appropriate, re
SOLD BY laptopia2005 DO NOT RESELL!!
PROPRIETARY NOTICE AND LIABILITY DISCLAIMER T he information disclosed in this document, including all designs and related materials, is the valuable property of NEC Computer Systems Division, Packard Bell NEC, Inc. (NECCSD, PBNEC) and/or its licensors. NECCSD and/or its licensors, as appropriate, r
SOLD BY laptopia2005 DO NOT RESELL!!
PROPRIETARY NOTICE AND LIABILITY DISCLAIMER The information disclosed in this document, including all designs and related materials, is the valuable property of NEC Corporation (NEC) and/or its licensors. NEC and/or its licen- sors, as appropriate, reserve all patent, copyright and other proprietary
SOLD BY laptopia2005 DO NOT RESELL!!
PROPRIETARY NOTICE AND LIABILITY DISCLAIMER The information disclosed in this document, including all designs and related materials, is the valuable property of NEC Computer Systems Division, Packard Bell NEC, Inc. (NECCSD, PBNEC) and/or its licensors. NECCSD and/or its licensors, as appropriate, re
NEC Versa 2600 Series Service Guide Art Copy Version
NEC Versa 2600 Series Service Guide Art Copy Version PROPRIETARY NOTICE AND LIABILITY DISCLAIMER The information disclosed in this document, including all designs and related materials, is the valuable property of NEC Computer Systems Division, Packard Bell NEC, Inc. (NECCSD, PBNEC) and/or its licen
SOLD BY laptopia2005 DO NOT RESELL!!
PROPRIETARY NOTICE AND LIABILITY DISCLAIMER The information disclosed in this document, including all designs and related materials, is the valuable property of NEC Corporation (NEC) and/or its licensors. NEC and/or its licen- sors, as appropriate, reserve all patent, copyright and other proprietary
SOLD BY laptopia2005 DO NOT RESELL!!
VERSA 2000 (RT1) SERVICE AND REFERENCE MANUAL PROPRIETARY NOTICE AND LIABILITY DISCLAIMER The information disclosed in this document, including all designs and related materials, is the valuable property of NEC Corporation (NEC) and/or its licensors. NEC and/or its licensors, as appropriate, reserve
IBM Mobile Systems ThinkPad Computer Hardware Maintenance Manual June 2001 This manual supports: ThinkPad A21e, A22e, i 1800 (MT 2655/2663/2664)
IBM Mobile Systems ThinkPad Computer Hardware Maintenance Manual June 2001 This manual supports: ThinkPad A21e, A22e, i 1800 (MT 2655/2663/2664) Note Before using this information and the product it supports, be sure to read the general information under “Notices” on page 137. Second Edition (June 2
ThinkPad s30, s31 Hardware Maintenance Manual
ThinkPad s30, s31 Hardware Maintenance Manual Before using this information and the product it supports, be sure to read the general information under “Read This First” on page 1. Second Edition (October 2001) The following paragraph does not apply to the United Kingdom or any country where such pro
Note Before using this information and the product it supports, be sure to read the general information under “Safety
Note Before using this information and the product it supports, be sure to read the general information under “Safety information” on page v and “Notices” on page 41. First Edition (January 2000) The following paragraph does not apply in the United Kingdom or any other country where such provisions
HP Omnibook XE3 (Intel CPU Version: Technology Code GF) Service Manual
HP Omnibook XE3 (Intel CPU Version: Technology Code GF) Service Manual Notice In a continuing effort to improve the quality of our products, technical and environmental information in this document is subject to change without notice. This manual and any examples contained herein are provided “as is
HP Omnibook XE3 (AMD CPU Version: Technology Codes GE and GD) Service Manual
HP Omnibook XE3 (AMD CPU Version: Technology Codes GE and GD) Service Manual Notice In a continuing effort to improve the quality of our products, technical and environmental information in this document is subject to change without notice. This manual and any examples contained herein are provided
Notice In a continuing effort to improve the quality of our products, technical and environmental information
Notice In a continuing effort to improve the quality of our products, technical and environmental information in this document is subject to change without notice. This manual and any examples contained herein are provided “as is” and are subject to change without notice. Hewlett-Packard Company mak
Tips and Troubleshooting 1 Tips for Using Your OmniBook XE 2 Troubleshooting
Tips and Troubleshooting 1 Tips for Using Your OmniBook XE Configuring the OmniBook XE with the BIOS Setup Utility Testing the Operation of the OmniBook XE Creating a Hibernate Partition Recovering Software Enabling Pulse Dialing in France, Belgium, and Spain Using Enhanced Video and Dual Monitors 2
Notice In a continuing effort to improve the quality of our products, technical and environmental information
Notice In a continuing effort to improve the quality of our products, technical and environmental information in this document is subject to change without notice. This manual and any examples contained herein are provided “as is” and are subject to change without notice. Hewlett-Packard Company mak
Operating the HP Notebook PC with a Windows 2000 Upgrade
Operating the HP Notebook PC with a Windows 2000 Upgrade Certain OmniBook-specific functions of your computer will work differently with the new operating system, Windows 2000. This altered functionality is explained below. For general operating information using Windows 2000, refer to Microsoft’s W
Service Manual
Service Manual HP OmniBook 300, 425, 430, 530 Notice In a continuing effort to improve the quality of our products, technical and environmental information in this document is subject to change without notice. Hewlett-Packard makes no warranty of any kind with regard to this material, including, but
HP OmniBook 4000C/CT Familiarization Guide
HP OmniBook 4000C/CT Familiarization Guide This guide is for experienced HP Response Center personnel, CEs, and reseller technicians, such as personnel who have already completed the HP Vectra PC family training course, or equivalent, and have at least six months of experience servicing the HP Vectr
HP Notebook PC
HP Notebook PC Reference Guide Notice This manual and any examples contained herein are provided “as is” and are subject to change without notice. Hewlett-Packard Company makes no warranty of any kind with regard to this manual, including, but not limited to, the implied warranties of merchantabilit
HP Notebook PC
HP Notebook PC Startup Guide Notice This manual and any examples contained herein are provided “as is” and are subject to change without notice. Hewlett-Packard Company makes no warranty of any kind with regard to this manual, including, but not limited to, the implied warranties of merchantability
Current Service Notes for HP OmniBooks. 13 June 2000
Ob 800 800-01 Fix on fail CPU Insulator 09/12/1996 800-02a Fix on fail 40 minutes 1.02 Suspend/Resume Issues and BIOS 1.02 01/29/1997 800-03 Fix on fail Flash Card Incompatability 11/04/1996 800-04 Fix on fail STANDOFF-HEX Replacement 12/03/1996 800-05 Fix on fail 30 minutes Mouse Tracking Problem 1
HP Omnibook XT/VT6200 PC Technology Code EG Corporate Evaluator’s Guide
HP Omnibook XT/VT6200 PC Technology Code EG Corporate Evaluator’s Guide Notice Technology Code EG This guide contains information about only the Omnibook XT/VT6200, technology code EG. The technology code is shown on the serial-number label on the bottom of the computer, and it is also included in t